wl1271: Fix ad-hoc mode handling
Fix the driver to better reflect the ad-hoc related configuration from the
mac80211.
Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com>
Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/wl12xx/wl1271.h b/drivers/net/wireless/wl12xx/wl1271.h
index c939680..37ad5cd 100644
--- a/drivers/net/wireless/wl12xx/wl1271.h
+++ b/drivers/net/wireless/wl12xx/wl1271.h
@@ -55,6 +55,7 @@
DEBUG_ACX = BIT(13),
DEBUG_SDIO = BIT(14),
DEBUG_FILTERS = BIT(15),
+ DEBUG_ADHOC = BIT(16),
DEBUG_ALL = ~0,
};
@@ -389,6 +390,7 @@
u8 bssid[ETH_ALEN];
u8 mac_addr[ETH_ALEN];
u8 bss_type;
+ u8 set_bss_type;
u8 ssid[IW_ESSID_MAX_SIZE + 1];
u8 ssid_len;
int channel;
diff --git a/drivers/net/wireless/wl12xx/wl1271_main.c b/drivers/net/wireless/wl12xx/wl1271_main.c
index 00e856c..49f37b0 100644
--- a/drivers/net/wireless/wl12xx/wl1271_main.c
+++ b/drivers/net/wireless/wl12xx/wl1271_main.c
@@ -958,9 +958,11 @@
switch (vif->type) {
case NL80211_IFTYPE_STATION:
wl->bss_type = BSS_TYPE_STA_BSS;
+ wl->set_bss_type = BSS_TYPE_STA_BSS;
break;
case NL80211_IFTYPE_ADHOC:
wl->bss_type = BSS_TYPE_IBSS;
+ wl->set_bss_type = BSS_TYPE_STA_BSS;
break;
default:
ret = -EOPNOTSUPP;
@@ -1065,6 +1067,7 @@
memset(wl->ssid, 0, IW_ESSID_MAX_SIZE + 1);
wl->ssid_len = 0;
wl->bss_type = MAX_BSS_TYPE;
+ wl->set_bss_type = MAX_BSS_TYPE;
wl->band = IEEE80211_BAND_2GHZ;
wl->rx_counter = 0;
@@ -1137,10 +1140,7 @@
/* pass through frames from all BSS */
wl1271_configure_filters(wl, FIF_OTHER_BSS);
- /* the dummy join is performed always with STATION BSS type to allow
- also ad-hoc mode to listen to the surroundings without sending any
- beacons yet. */
- ret = wl1271_cmd_join(wl, BSS_TYPE_STA_BSS);
+ ret = wl1271_cmd_join(wl, wl->set_bss_type);
if (ret < 0)
goto out;
@@ -1211,7 +1211,7 @@
test_bit(WL1271_FLAG_JOINED, &wl->flags)) {
wl->channel = channel;
/* FIXME: maybe use CMD_CHANNEL_SWITCH for this? */
- ret = wl1271_cmd_join(wl, wl->bss_type);
+ ret = wl1271_cmd_join(wl, wl->set_bss_type);
if (ret < 0)
wl1271_warning("cmd join to update channel failed %d",
ret);
@@ -1575,13 +1575,12 @@
if (ret < 0)
goto out;
- if (wl->bss_type == BSS_TYPE_IBSS) {
- /* FIXME: This implements rudimentary ad-hoc support -
- proper templates are on the wish list and notification
- on when they change. This patch will update the templates
- on every call to this function. */
+ if ((changed && BSS_CHANGED_BEACON) &&
+ (wl->bss_type == BSS_TYPE_IBSS)) {
struct sk_buff *beacon = ieee80211_beacon_get(hw, vif);
+ wl1271_debug(DEBUG_ADHOC, "ad-hoc beacon updated");
+
if (beacon) {
struct ieee80211_hdr *hdr;
@@ -1613,6 +1612,18 @@
}
}
+ if ((changed & BSS_CHANGED_BEACON_ENABLED) &&
+ (wl->bss_type == BSS_TYPE_IBSS)) {
+ wl1271_debug(DEBUG_ADHOC, "ad-hoc beaconing: %s",
+ bss_conf->enable_beacon ? "enabled" : "disabled");
+
+ if (bss_conf->enable_beacon)
+ wl->set_bss_type = BSS_TYPE_IBSS;
+ else
+ wl->set_bss_type = BSS_TYPE_STA_BSS;
+ do_join = true;
+ }
+
if ((changed & BSS_CHANGED_BSSID) &&
/*
* Now we know the correct bssid, so we send a new join command
@@ -1707,7 +1718,7 @@
}
if (do_join) {
- ret = wl1271_cmd_join(wl, wl->bss_type);
+ ret = wl1271_cmd_join(wl, wl->set_bss_type);
if (ret < 0) {
wl1271_warning("cmd join failed %d", ret);
goto out_sleep;
