# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/usb/usb-nop-xceiv.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: USB NOP PHY

maintainers:
  - Rob Herring <robh@kernel.org>

properties:
  compatible:
    const: usb-nop-xceiv

  clocks:
    maxItems: 1

  clock-names:
    const: main_clk

  clock-frequency: true

  '#phy-cells':
    const: 0

  vcc-supply:
    description: phandle to the regulator that provides power to the PHY.

  power-domains:
    maxItems: 1

  reset-gpios:
    maxItems: 1

  vbus-detect-gpio:
    description: Should specify the GPIO detecting a VBus insertion
    maxItems: 1

  vbus-supply:
    description: regulator supplying VBUS. It will be enabled and disabled
                 dynamically in OTG mode. If the regulator is controlled by a
                 GPIO line, this should be modeled as a regulator-fixed and
                 referenced by this supply.

  wakeup-source:
    description:
      Specify if the USB phy can detect the remote wakeup signal
      while the system sleep.

required:
  - compatible
  - '#phy-cells'

additionalProperties: false

examples:
  - |
    #include <dt-bindings/gpio/gpio.h>

    hsusb1_phy {
        compatible = "usb-nop-xceiv";
        clock-frequency = <19200000>;
        clocks = <&osc 0>;
        clock-names = "main_clk";
        vcc-supply = <&hsusb1_vcc_regulator>;
        reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
        vbus-detect-gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
        vbus-supply = <&vbus_regulator>;
        #phy-cells = <0>;
    };

...