// SPDX-License-Identifier: GPL-2.0-only OR MIT
/*
 * Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/
 *
 * EVM Board Schematics: https://www.ti.com/lit/zip/sprr458
 */

/dts-v1/;

#include <dt-bindings/net/ti-dp83867.h>
#include <dt-bindings/gpio/gpio.h>
#include "k3-j784s4.dtsi"

/ {
	compatible = "ti,j784s4-evm", "ti,j784s4";
	model = "Texas Instruments J784S4 EVM";

	chosen {
		stdout-path = "serial2:115200n8";
	};

	aliases {
		serial0 = &wkup_uart0;
		serial1 = &mcu_uart0;
		serial2 = &main_uart8;
		mmc0 = &main_sdhci0;
		mmc1 = &main_sdhci1;
		i2c0 = &wkup_i2c0;
		i2c3 = &main_i2c0;
	};

	memory@80000000 {
		device_type = "memory";
		bootph-all;
		/* 32G RAM */
		reg = <0x00 0x80000000 0x00 0x80000000>,
		      <0x08 0x80000000 0x07 0x80000000>;
	};

	reserved_memory: reserved-memory {
		#address-cells = <2>;
		#size-cells = <2>;
		ranges;

		secure_ddr: optee@9e800000 {
			reg = <0x00 0x9e800000 0x00 0x01800000>;
			no-map;
		};

		mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
			compatible = "shared-dma-pool";
			reg = <0x00 0xa0000000 0x00 0x100000>;
			no-map;
		};

		mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 {
			compatible = "shared-dma-pool";
			reg = <0x00 0xa0100000 0x00 0xf00000>;
			no-map;
		};

		mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
			compatible = "shared-dma-pool";
			reg = <0x00 0xa1000000 0x00 0x100000>;
			no-map;
		};

		mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 {
			compatible = "shared-dma-pool";
			reg = <0x00 0xa1100000 0x00 0xf00000>;
			no-map;
		};

		main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 {
			compatible = "shared-dma-pool";
			reg = <0x00 0xa2000000 0x00 0x100000>;
			no-map;
		};

		main_r5fss0_core0_memory_region: r5f-memory@a2100000 {
			compatible = "shared-dma-pool";
			reg = <0x00 0xa2100000 0x00 0xf00000>;
			no-map;
		};

		main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 {
			compatible = "shared-dma-pool";
			reg = <0x00 0xa3000000 0x00 0x100000>;
			no-map;
		};

		main_r5fss0_core1_memory_region: r5f-memory@a3100000 {
			compatible = "shared-dma-pool";
			reg = <0x00 0xa3100000 0x00 0xf00000>;
			no-map;
		};

		main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a4000000 {
			compatible = "shared-dma-pool";
			reg = <0x00 0xa4000000 0x00 0x100000>;
			no-map;
		};

		main_r5fss1_core0_memory_region: r5f-memory@a4100000 {
			compatible = "shared-dma-pool";
			reg = <0x00 0xa4100000 0x00 0xf00000>;
			no-map;
		};

		main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a5000000 {
			compatible = "shared-dma-pool";
			reg = <0x00 0xa5000000 0x00 0x100000>;
			no-map;
		};

		main_r5fss1_core1_memory_region: r5f-memory@a5100000 {
			compatible = "shared-dma-pool";
			reg = <0x00 0xa5100000 0x00 0xf00000>;
			no-map;
		};

		main_r5fss2_core0_dma_memory_region: r5f-dma-memory@a6000000 {
			compatible = "shared-dma-pool";
			reg = <0x00 0xa6000000 0x00 0x100000>;
			no-map;
		};

		main_r5fss2_core0_memory_region: r5f-memory@a6100000 {
			compatible = "shared-dma-pool";
			reg = <0x00 0xa6100000 0x00 0xf00000>;
			no-map;
		};

		main_r5fss2_core1_dma_memory_region: r5f-dma-memory@a7000000 {
			compatible = "shared-dma-pool";
			reg = <0x00 0xa7000000 0x00 0x100000>;
			no-map;
		};

		main_r5fss2_core1_memory_region: r5f-memory@a7100000 {
			compatible = "shared-dma-pool";
			reg = <0x00 0xa7100000 0x00 0xf00000>;
			no-map;
		};

		c71_0_dma_memory_region: c71-dma-memory@a8000000 {
			compatible = "shared-dma-pool";
			reg = <0x00 0xa8000000 0x00 0x100000>;
			no-map;
		};

		c71_0_memory_region: c71-memory@a8100000 {
			compatible = "shared-dma-pool";
			reg = <0x00 0xa8100000 0x00 0xf00000>;
			no-map;
		};

		c71_1_dma_memory_region: c71-dma-memory@a9000000 {
			compatible = "shared-dma-pool";
			reg = <0x00 0xa9000000 0x00 0x100000>;
			no-map;
		};

		c71_1_memory_region: c71-memory@a9100000 {
			compatible = "shared-dma-pool";
			reg = <0x00 0xa9100000 0x00 0xf00000>;
			no-map;
		};

		c71_2_dma_memory_region: c71-dma-memory@aa000000 {
			compatible = "shared-dma-pool";
			reg = <0x00 0xaa000000 0x00 0x100000>;
			no-map;
		};

		c71_2_memory_region: c71-memory@aa100000 {
			compatible = "shared-dma-pool";
			reg = <0x00 0xaa100000 0x00 0xf00000>;
			no-map;
		};

		c71_3_dma_memory_region: c71-dma-memory@ab000000 {
			compatible = "shared-dma-pool";
			reg = <0x00 0xab000000 0x00 0x100000>;
			no-map;
		};

		c71_3_memory_region: c71-memory@ab100000 {
			compatible = "shared-dma-pool";
			reg = <0x00 0xab100000 0x00 0xf00000>;
			no-map;
		};
	};

	evm_12v0: regulator-evm12v0 {
		/* main supply */
		compatible = "regulator-fixed";
		regulator-name = "evm_12v0";
		regulator-min-microvolt = <12000000>;
		regulator-max-microvolt = <12000000>;
		regulator-always-on;
		regulator-boot-on;
	};

	vsys_3v3: regulator-vsys3v3 {
		/* Output of LM5140 */
		compatible = "regulator-fixed";
		regulator-name = "vsys_3v3";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		vin-supply = <&evm_12v0>;
		regulator-always-on;
		regulator-boot-on;
	};

	vsys_5v0: regulator-vsys5v0 {
		/* Output of LM5140 */
		compatible = "regulator-fixed";
		regulator-name = "vsys_5v0";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		vin-supply = <&evm_12v0>;
		regulator-always-on;
		regulator-boot-on;
	};

	vdd_mmc1: regulator-sd {
		/* Output of TPS22918 */
		compatible = "regulator-fixed";
		regulator-name = "vdd_mmc1";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		regulator-boot-on;
		enable-active-high;
		vin-supply = <&vsys_3v3>;
		gpio = <&exp2 2 GPIO_ACTIVE_HIGH>;
	};

	vdd_sd_dv: regulator-TLV71033 {
		/* Output of TLV71033 */
		compatible = "regulator-gpio";
		regulator-name = "tlv71033";
		pinctrl-names = "default";
		pinctrl-0 = <&vdd_sd_dv_pins_default>;
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <3300000>;
		regulator-boot-on;
		vin-supply = <&vsys_5v0>;
		gpios = <&main_gpio0 8 GPIO_ACTIVE_HIGH>;
		states = <1800000 0x0>,
			 <3300000 0x1>;
	};

	dp0_pwr_3v3: regulator-dp0-prw {
		compatible = "regulator-fixed";
		regulator-name = "dp0-pwr";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		gpio = <&exp4 0 GPIO_ACTIVE_HIGH>;
		enable-active-high;
	};

	dp0: connector-dp0 {
		compatible = "dp-connector";
		label = "DP0";
		type = "full-size";
		dp-pwr-supply = <&dp0_pwr_3v3>;

		port {
			dp0_connector_in: endpoint {
				remote-endpoint = <&dp0_out>;
			};
		};
	};
};

&wkup_gpio0 {
	status = "okay";
};

&main_pmx0 {
	bootph-all;
	main_uart8_pins_default: main-uart8-default-pins {
		bootph-all;
		pinctrl-single,pins = <
			J784S4_IOPAD(0x040, PIN_INPUT, 14) /* (AF37) MCASP0_AXR0.UART8_CTSn */
			J784S4_IOPAD(0x044, PIN_OUTPUT, 14) /* (AG37) MCASP0_AXR1.UART8_RTSn */
			J784S4_IOPAD(0x0d0, PIN_INPUT, 11) /* (AP38) SPI0_CS1.UART8_RXD */
			J784S4_IOPAD(0x0d4, PIN_OUTPUT, 11) /* (AN38) SPI0_CLK.UART8_TXD */
		>;
	};

	main_i2c0_pins_default: main-i2c0-default-pins {
		pinctrl-single,pins = <
			J784S4_IOPAD(0x0e0, PIN_INPUT_PULLUP, 0) /* (AN36) I2C0_SCL */
			J784S4_IOPAD(0x0e4, PIN_INPUT_PULLUP, 0) /* (AP37) I2C0_SDA */
		>;
	};

	main_i2c5_pins_default: main-i2c5-default-pins {
		pinctrl-single,pins = <
			J784S4_IOPAD(0x01c, PIN_INPUT, 8) /* (AG34) MCAN15_TX.I2C5_SCL */
			J784S4_IOPAD(0x018, PIN_INPUT, 8) /* (AK36) MCAN14_RX.I2C5_SDA */
		>;
	};

	main_mmc1_pins_default: main-mmc1-default-pins {
		bootph-all;
		pinctrl-single,pins = <
			J784S4_IOPAD(0x104, PIN_INPUT, 0) /* (AB38) MMC1_CLK */
			J784S4_IOPAD(0x108, PIN_INPUT, 0) /* (AB36) MMC1_CMD */
			J784S4_IOPAD(0x100, PIN_INPUT, 0) /* (No Pin) MMC1_CLKLB */
			J784S4_IOPAD(0x0fc, PIN_INPUT, 0) /* (AA33) MMC1_DAT0 */
			J784S4_IOPAD(0x0f8, PIN_INPUT, 0) /* (AB34) MMC1_DAT1 */
			J784S4_IOPAD(0x0f4, PIN_INPUT, 0) /* (AA32) MMC1_DAT2 */
			J784S4_IOPAD(0x0f0, PIN_INPUT, 0) /* (AC38) MMC1_DAT3 */
			J784S4_IOPAD(0x0e8, PIN_INPUT, 8) /* (AR38) TIMER_IO0.MMC1_SDCD */
		>;
	};

	vdd_sd_dv_pins_default: vdd-sd-dv-default-pins {
		pinctrl-single,pins = <
			J784S4_IOPAD(0x020, PIN_INPUT, 7) /* (AJ35) MCAN15_RX.GPIO0_8 */
		>;
	};

	dp0_pins_default: dp0-default-pins {
		pinctrl-single,pins = <
			J784S4_IOPAD(0x0cc, PIN_INPUT, 12) /* (AM37) SPI0_CS0.DP0_HPD */
		>;
	};

	main_i2c4_pins_default: main-i2c4-default-pins {
		pinctrl-single,pins = <
			J784S4_IOPAD(0x014, PIN_INPUT_PULLUP, 8) /* (AG33) MCAN14_TX.I2C4_SCL */
			J784S4_IOPAD(0x010, PIN_INPUT_PULLUP, 8) /* (AH33) MCAN13_RX.I2C4_SDA */
		>;
	};
};

&wkup_pmx2 {
	bootph-all;
	wkup_uart0_pins_default: wkup-uart0-default-pins {
		bootph-all;
		pinctrl-single,pins = <
			J721S2_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (K35) WKUP_UART0_RXD */
			J721S2_WKUP_IOPAD(0x04c, PIN_INPUT, 0) /* (K34) WKUP_UART0_TXD */
		>;
	};

	wkup_i2c0_pins_default: wkup-i2c0-default-pins {
		bootph-all;
		pinctrl-single,pins = <
			J721S2_WKUP_IOPAD(0x98, PIN_INPUT, 0) /* (N33) WKUP_I2C0_SCL */
			J721S2_WKUP_IOPAD(0x9c, PIN_INPUT, 0) /* (N35) WKUP_I2C0_SDA */
		>;
	};

	mcu_uart0_pins_default: mcu-uart0-default-pins {
		bootph-all;
		pinctrl-single,pins = <
			J784S4_WKUP_IOPAD(0x090, PIN_INPUT, 0) /* (H37) WKUP_GPIO0_14.MCU_UART0_CTSn */
			J784S4_WKUP_IOPAD(0x094, PIN_OUTPUT, 0) /* (K37) WKUP_GPIO0_15.MCU_UART0_RTSn */
			J784S4_WKUP_IOPAD(0x08c, PIN_INPUT, 0) /* (K38) WKUP_GPIO0_13.MCU_UART0_RXD */
			J784S4_WKUP_IOPAD(0x088, PIN_OUTPUT, 0) /* (J37) WKUP_GPIO0_12.MCU_UART0_TXD */
		>;
	};

	mcu_cpsw_pins_default: mcu-cpsw-default-pins {
		pinctrl-single,pins = <
			J784S4_WKUP_IOPAD(0x02c, PIN_INPUT, 0) /* (A35) MCU_RGMII1_RD0 */
			J784S4_WKUP_IOPAD(0x028, PIN_INPUT, 0) /* (B36) MCU_RGMII1_RD1 */
			J784S4_WKUP_IOPAD(0x024, PIN_INPUT, 0) /* (C36) MCU_RGMII1_RD2 */
			J784S4_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (D36) MCU_RGMII1_RD3 */
			J784S4_WKUP_IOPAD(0x01c, PIN_INPUT, 0) /* (B37) MCU_RGMII1_RXC */
			J784S4_WKUP_IOPAD(0x004, PIN_INPUT, 0) /* (C37) MCU_RGMII1_RX_CTL */
			J784S4_WKUP_IOPAD(0x014, PIN_OUTPUT, 0) /* (D37) MCU_RGMII1_TD0 */
			J784S4_WKUP_IOPAD(0x010, PIN_OUTPUT, 0) /* (D38) MCU_RGMII1_TD1 */
			J784S4_WKUP_IOPAD(0x00c, PIN_OUTPUT, 0) /* (E37) MCU_RGMII1_TD2 */
			J784S4_WKUP_IOPAD(0x008, PIN_OUTPUT, 0) /* (E38) MCU_RGMII1_TD3 */
			J784S4_WKUP_IOPAD(0x018, PIN_OUTPUT, 0) /* (E36) MCU_RGMII1_TXC */
			J784S4_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (C38) MCU_RGMII1_TX_CTL */
		>;
	};

	mcu_mdio_pins_default: mcu-mdio-default-pins {
		pinctrl-single,pins = <
			J784S4_WKUP_IOPAD(0x034, PIN_OUTPUT, 0) /* (A36) MCU_MDIO0_MDC */
			J784S4_WKUP_IOPAD(0x030, PIN_INPUT, 0) /* (B35) MCU_MDIO0_MDIO */
		>;
	};

	mcu_adc0_pins_default: mcu-adc0-default-pins {
		pinctrl-single,pins = <
			J784S4_WKUP_IOPAD(0x0cc, PIN_INPUT, 0) /* (P36) MCU_ADC0_AIN0 */
			J784S4_WKUP_IOPAD(0x0d0, PIN_INPUT, 0) /* (V36) MCU_ADC0_AIN1 */
			J784S4_WKUP_IOPAD(0x0d4, PIN_INPUT, 0) /* (T34) MCU_ADC0_AIN2 */
			J784S4_WKUP_IOPAD(0x0d8, PIN_INPUT, 0) /* (T36) MCU_ADC0_AIN3 */
			J784S4_WKUP_IOPAD(0x0dc, PIN_INPUT, 0) /* (P34) MCU_ADC0_AIN4 */
			J784S4_WKUP_IOPAD(0x0e0, PIN_INPUT, 0) /* (R37) MCU_ADC0_AIN5 */
			J784S4_WKUP_IOPAD(0x0e4, PIN_INPUT, 0) /* (R33) MCU_ADC0_AIN6 */
			J784S4_WKUP_IOPAD(0x0e8, PIN_INPUT, 0) /* (V38) MCU_ADC0_AIN7 */
		>;
	};

	mcu_adc1_pins_default: mcu-adc1-default-pins {
		pinctrl-single,pins = <
			J784S4_WKUP_IOPAD(0x0ec, PIN_INPUT, 0) /* (Y38) MCU_ADC1_AIN0 */
			J784S4_WKUP_IOPAD(0x0f0, PIN_INPUT, 0) /* (Y34) MCU_ADC1_AIN1 */
			J784S4_WKUP_IOPAD(0x0f4, PIN_INPUT, 0) /* (V34) MCU_ADC1_AIN2 */
			J784S4_WKUP_IOPAD(0x0f8, PIN_INPUT, 0) /* (W37) MCU_ADC1_AIN3 */
			J784S4_WKUP_IOPAD(0x0fc, PIN_INPUT, 0) /* (AA37) MCU_ADC1_AIN4 */
			J784S4_WKUP_IOPAD(0x100, PIN_INPUT, 0) /* (W33) MCU_ADC1_AIN5 */
			J784S4_WKUP_IOPAD(0x104, PIN_INPUT, 0) /* (U33) MCU_ADC1_AIN6 */
			J784S4_WKUP_IOPAD(0x108, PIN_INPUT, 0) /* (Y36) MCU_ADC1_AIN7 */
		>;
	};
};

&wkup_pmx1 {
	status = "okay";

	pmic_irq_pins_default: pmic-irq-default-pins {
		pinctrl-single,pins = <
			/* (G33) MCU_OSPI1_CSn1.WKUP_GPIO0_39 */
			J784S4_WKUP_IOPAD(0x028, PIN_INPUT, 7)
		>;
	};
};

&wkup_pmx0 {
	bootph-all;
	mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins {
		bootph-all;
		pinctrl-single,pins = <
			J784S4_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (E32) MCU_OSPI0_CLK */
			J784S4_WKUP_IOPAD(0x02c, PIN_OUTPUT, 0) /* (A32) MCU_OSPI0_CSn0 */
			J784S4_WKUP_IOPAD(0x00c, PIN_INPUT, 0) /* (B33) MCU_OSPI0_D0 */
			J784S4_WKUP_IOPAD(0x010, PIN_INPUT, 0) /* (B32) MCU_OSPI0_D1 */
			J784S4_WKUP_IOPAD(0x014, PIN_INPUT, 0) /* (C33) MCU_OSPI0_D2 */
			J784S4_WKUP_IOPAD(0x018, PIN_INPUT, 0) /* (C35) MCU_OSPI0_D3 */
			J784S4_WKUP_IOPAD(0x01c, PIN_INPUT, 0) /* (D33) MCU_OSPI0_D4 */
			J784S4_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (D34) MCU_OSPI0_D5 */
			J784S4_WKUP_IOPAD(0x024, PIN_INPUT, 0) /* (E34) MCU_OSPI0_D6 */
			J784S4_WKUP_IOPAD(0x028, PIN_INPUT, 0) /* (E33) MCU_OSPI0_D7 */
			J784S4_WKUP_IOPAD(0x008, PIN_INPUT, 0) /* (C34) MCU_OSPI0_DQS */
		>;
	};
};

&wkup_pmx1 {
	bootph-all;
	mcu_fss0_ospi0_1_pins_default: mcu-fss0-ospi0-1-default-pins {
		bootph-all;
		pinctrl-single,pins = <
			J784S4_WKUP_IOPAD(0x004, PIN_OUTPUT, 6) /* (C32) MCU_OSPI0_ECC_FAIL */
			J784S4_WKUP_IOPAD(0x000, PIN_OUTPUT, 6) /* (B34) MCU_OSPI0_RESET_OUT0 */
		>;
	};

	mcu_fss0_ospi1_pins_default: mcu-fss0-ospi1-default-pins {
		bootph-all;
		pinctrl-single,pins = <
			J784S4_WKUP_IOPAD(0x008, PIN_OUTPUT, 0) /* (F32) MCU_OSPI1_CLK */
			J784S4_WKUP_IOPAD(0x024, PIN_OUTPUT, 0) /* (G32) MCU_OSPI1_CSn0 */
			J784S4_WKUP_IOPAD(0x014, PIN_INPUT, 0) /* (E35) MCU_OSPI1_D0 */
			J784S4_WKUP_IOPAD(0x018, PIN_INPUT, 0) /* (D31) MCU_OSPI1_D1 */
			J784S4_WKUP_IOPAD(0x01C, PIN_INPUT, 0) /* (G31) MCU_OSPI1_D2 */
			J784S4_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (F33) MCU_OSPI1_D3 */
			J784S4_WKUP_IOPAD(0x010, PIN_INPUT, 0) /* (F31) MCU_OSPI1_DQS */
			J784S4_WKUP_IOPAD(0x00C, PIN_INPUT, 0) /* (C31) MCU_OSPI1_LBCLKO */
		>;
	};
};

&wkup_uart0 {
	/* Firmware usage */
	status = "reserved";
	pinctrl-names = "default";
	pinctrl-0 = <&wkup_uart0_pins_default>;
};

&wkup_i2c0 {
	bootph-all;
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&wkup_i2c0_pins_default>;
	clock-frequency = <400000>;

	eeprom@50 {
		/* CAV24C256WE-GT3 */
		compatible = "atmel,24c256";
		reg = <0x50>;
	};

	tps659413: pmic@48 {
		compatible = "ti,tps6594-q1";
		reg = <0x48>;
		system-power-controller;
		pinctrl-names = "default";
		pinctrl-0 = <&pmic_irq_pins_default>;
		interrupt-parent = <&wkup_gpio0>;
		interrupts = <39 IRQ_TYPE_EDGE_FALLING>;
		gpio-controller;
		#gpio-cells = <2>;
		ti,primary-pmic;
		buck12-supply = <&vsys_3v3>;
		buck3-supply = <&vsys_3v3>;
		buck4-supply = <&vsys_3v3>;
		buck5-supply = <&vsys_3v3>;
		ldo1-supply = <&vsys_3v3>;
		ldo2-supply = <&vsys_3v3>;
		ldo3-supply = <&vsys_3v3>;
		ldo4-supply = <&vsys_3v3>;

		regulators {
			bucka12: buck12 {
				regulator-name = "vdd_ddr_1v1";
				regulator-min-microvolt = <1100000>;
				regulator-max-microvolt = <1100000>;
				regulator-boot-on;
				regulator-always-on;
			};

			bucka3: buck3 {
				regulator-name = "vdd_ram_0v85";
				regulator-min-microvolt = <850000>;
				regulator-max-microvolt = <850000>;
				regulator-boot-on;
				regulator-always-on;
			};

			bucka4: buck4 {
				regulator-name = "vdd_io_1v8";
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
				regulator-boot-on;
				regulator-always-on;
			};

			bucka5: buck5 {
				regulator-name = "vdd_mcu_0v85";
				regulator-min-microvolt = <850000>;
				regulator-max-microvolt = <850000>;
				regulator-boot-on;
				regulator-always-on;
			};

			ldoa1: ldo1 {
				regulator-name = "vdd_mcuio_1v8";
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
				regulator-boot-on;
				regulator-always-on;
			};

			ldoa2: ldo2 {
				regulator-name = "vdd_mcuio_3v3";
				regulator-min-microvolt = <3300000>;
				regulator-max-microvolt = <3300000>;
				regulator-boot-on;
				regulator-always-on;
			};

			ldoa3: ldo3 {
				regulator-name = "vds_dll_0v8";
				regulator-min-microvolt = <800000>;
				regulator-max-microvolt = <800000>;
				regulator-boot-on;
				regulator-always-on;
			};

			ldoa4: ldo4 {
				regulator-name = "vda_mcu_1v8";
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
				regulator-boot-on;
				regulator-always-on;
			};
		};
	};
};

&mcu_uart0 {
	bootph-all;
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&mcu_uart0_pins_default>;
};

&main_uart8 {
	bootph-all;
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&main_uart8_pins_default>;
};

&ufs_wrapper {
	status = "okay";
};

&fss {
	bootph-all;
	status = "okay";
};

&ospi0 {
	bootph-all;
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&mcu_fss0_ospi0_pins_default>, <&mcu_fss0_ospi0_1_pins_default>;

	flash@0 {
		bootph-all;
		compatible = "jedec,spi-nor";
		reg = <0x0>;
		spi-tx-bus-width = <8>;
		spi-rx-bus-width = <8>;
		spi-max-frequency = <25000000>;
		cdns,tshsl-ns = <60>;
		cdns,tsd2d-ns = <60>;
		cdns,tchsh-ns = <60>;
		cdns,tslch-ns = <60>;
		cdns,read-delay = <4>;

		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			partition@0 {
				label = "ospi.tiboot3";
				reg = <0x0 0x80000>;
			};

			partition@80000 {
				label = "ospi.tispl";
				reg = <0x80000 0x200000>;
			};

			partition@280000 {
				label = "ospi.u-boot";
				reg = <0x280000 0x400000>;
			};

			partition@680000 {
				label = "ospi.env";
				reg = <0x680000 0x40000>;
			};

			partition@6c0000 {
				label = "ospi.env.backup";
				reg = <0x6c0000 0x40000>;
			};

			partition@800000 {
				label = "ospi.rootfs";
				reg = <0x800000 0x37c0000>;
			};

			partition@3fc0000 {
				bootph-all;
				label = "ospi.phypattern";
				reg = <0x3fc0000 0x40000>;
			};
		};
	};
};

&ospi1 {
	bootph-all;
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&mcu_fss0_ospi1_pins_default>;

	flash@0 {
		bootph-all;
		compatible = "jedec,spi-nor";
		reg = <0x0>;
		spi-tx-bus-width = <1>;
		spi-rx-bus-width = <4>;
		spi-max-frequency = <40000000>;
		cdns,tshsl-ns = <60>;
		cdns,tsd2d-ns = <60>;
		cdns,tchsh-ns = <60>;
		cdns,tslch-ns = <60>;
		cdns,read-delay = <2>;

		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			partition@0 {
				label = "qspi.tiboot3";
				reg = <0x0 0x80000>;
			};

			partition@80000 {
				label = "qspi.tispl";
				reg = <0x80000 0x200000>;
			};

			partition@280000 {
				label = "qspi.u-boot";
				reg = <0x280000 0x400000>;
			};

			partition@680000 {
				label = "qspi.env";
				reg = <0x680000 0x40000>;
			};

			partition@6c0000 {
				label = "qspi.env.backup";
				reg = <0x6c0000 0x40000>;
			};

			partition@800000 {
				label = "qspi.rootfs";
				reg = <0x800000 0x37c0000>;
			};

			partition@3fc0000 {
				bootph-all;
				label = "qspi.phypattern";
				reg = <0x3fc0000 0x40000>;
			};
		};

	};
};

&main_i2c0 {
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&main_i2c0_pins_default>;

	clock-frequency = <400000>;

	exp1: gpio@20 {
		compatible = "ti,tca6416";
		reg = <0x20>;
		gpio-controller;
		#gpio-cells = <2>;
		gpio-line-names = "PCIE1_2L_MODE_SEL", "PCIE1_4L_PERSTZ", "PCIE1_2L_RC_RSTZ",
				  "PCIE1_2L_EP_RST_EN", "PCIE0_4L_MODE_SEL", "PCIE0_4L_PERSTZ",
				  "PCIE0_4L_RC_RSTZ", "PCIE0_4L_EP_RST_EN", "PCIE1_4L_PRSNT#",
				  "PCIE0_4L_PRSNT#", "CDCI1_OE1/OE4", "CDCI1_OE2/OE3",
				  "AUDIO_MUX_SEL", "EXP_MUX2", "EXP_MUX3", "GESI_EXP_PHY_RSTZ";
	};

	exp2: gpio@22 {
		compatible = "ti,tca6424";
		reg = <0x22>;
		gpio-controller;
		#gpio-cells = <2>;
		gpio-line-names = "R_GPIO_RGMII1_RST", "ENET2_I2CMUX_SEL", "GPIO_USD_PWR_EN",
				  "USBC_PWR_EN", "USBC_MODE_SEL1", "USBC_MODE_SEL0",
				  "GPIO_LIN_EN", "R_CAN_STB", "CTRL_PM_I2C_OE#",
				  "ENET2_EXP_PWRDN", "ENET2_EXP_SPARE2", "CDCI2_RSTZ",
				  "USB2.0_MUX_SEL", "CANUART_MUX_SEL0", "CANUART_MUX2_SEL1",
				  "CANUART_MUX1_SEL1", "ENET1_EXP_PWRDN", "ENET1_EXP_RESETZ",
				  "ENET1_I2CMUX_SEL", "ENET1_EXP_SPARE2", "ENET2_EXP_RESETZ",
				  "USER_INPUT1", "USER_LED1", "USER_LED2";
	};
};

&main_i2c5 {
	pinctrl-names = "default";
	pinctrl-0 = <&main_i2c5_pins_default>;
	clock-frequency = <400000>;
	status = "okay";

	exp5: gpio@20 {
		compatible = "ti,tca6408";
		reg = <0x20>;
		gpio-controller;
		#gpio-cells = <2>;
		gpio-line-names = "CSI2_EXP_RSTZ", "CSI2_EXP_A_GPIO0",
				  "CSI2_EXP_A_GPIO1", "CSI2_EXP_A_GPIO3",
				  "CSI2_EXP_B_GPIO1", "CSI2_EXP_B_GPIO2",
				  "CSI2_EXP_B_GPIO3", "CSI2_EXP_B_GPIO4";
	};
};

&main_sdhci0 {
	bootph-all;
	/* eMMC */
	status = "okay";
	non-removable;
	ti,driver-strength-ohm = <50>;
	disable-wp;
};

&main_sdhci1 {
	bootph-all;
	/* SD card */
	status = "okay";
	pinctrl-0 = <&main_mmc1_pins_default>;
	pinctrl-names = "default";
	disable-wp;
	vmmc-supply = <&vdd_mmc1>;
	vqmmc-supply = <&vdd_sd_dv>;
};

&main_gpio0 {
	status = "okay";
};

&mcu_cpsw {
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&mcu_cpsw_pins_default>;
};

&davinci_mdio {
	pinctrl-names = "default";
	pinctrl-0 = <&mcu_mdio_pins_default>;

	mcu_phy0: ethernet-phy@0 {
		reg = <0>;
		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
		ti,min-output-impedance;
	};
};

&mcu_cpsw_port1 {
	status = "okay";
	phy-mode = "rgmii-rxid";
	phy-handle = <&mcu_phy0>;
};

&mailbox0_cluster0 {
	status = "okay";
	interrupts = <436>;

	mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
		ti,mbox-rx = <0 0 0>;
		ti,mbox-tx = <1 0 0>;
	};

	mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
		ti,mbox-rx = <2 0 0>;
		ti,mbox-tx = <3 0 0>;
	};
};

&mailbox0_cluster1 {
	status = "okay";
	interrupts = <432>;

	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
		ti,mbox-rx = <0 0 0>;
		ti,mbox-tx = <1 0 0>;
	};

	mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
		ti,mbox-rx = <2 0 0>;
		ti,mbox-tx = <3 0 0>;
	};
};

&mailbox0_cluster2 {
	status = "okay";
	interrupts = <428>;

	mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
		ti,mbox-rx = <0 0 0>;
		ti,mbox-tx = <1 0 0>;
	};

	mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
		ti,mbox-rx = <2 0 0>;
		ti,mbox-tx = <3 0 0>;
	};
};

&mailbox0_cluster3 {
	status = "okay";
	interrupts = <424>;

	mbox_main_r5fss2_core0: mbox-main-r5fss2-core0 {
		ti,mbox-rx = <0 0 0>;
		ti,mbox-tx = <1 0 0>;
	};

	mbox_main_r5fss2_core1: mbox-main-r5fss2-core1 {
		ti,mbox-rx = <2 0 0>;
		ti,mbox-tx = <3 0 0>;
	};
};

&mailbox0_cluster4 {
	status = "okay";
	interrupts = <420>;

	mbox_c71_0: mbox-c71-0 {
		ti,mbox-rx = <0 0 0>;
		ti,mbox-tx = <1 0 0>;
	};

	mbox_c71_1: mbox-c71-1 {
		ti,mbox-rx = <2 0 0>;
		ti,mbox-tx = <3 0 0>;
	};
};

&mailbox0_cluster5 {
	status = "okay";
	interrupts = <416>;

	mbox_c71_2: mbox-c71-2 {
		ti,mbox-rx = <0 0 0>;
		ti,mbox-tx = <1 0 0>;
	};

	mbox_c71_3: mbox-c71-3 {
		ti,mbox-rx = <2 0 0>;
		ti,mbox-tx = <3 0 0>;
	};
};

&mcu_r5fss0_core0 {
	status = "okay";
	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
			<&mcu_r5fss0_core0_memory_region>;
};

&mcu_r5fss0_core1 {
	status = "okay";
	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>;
	memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
			<&mcu_r5fss0_core1_memory_region>;
};

&main_r5fss0_core0 {
	status = "okay";
	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>;
	memory-region = <&main_r5fss0_core0_dma_memory_region>,
			<&main_r5fss0_core0_memory_region>;
};

&main_r5fss0_core1 {
	status = "okay";
	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>;
	memory-region = <&main_r5fss0_core1_dma_memory_region>,
			<&main_r5fss0_core1_memory_region>;
};

&main_r5fss1_core0 {
	status = "okay";
	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core0>;
	memory-region = <&main_r5fss1_core0_dma_memory_region>,
			<&main_r5fss1_core0_memory_region>;
};

&main_r5fss1_core1 {
	status = "okay";
	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core1>;
	memory-region = <&main_r5fss1_core1_dma_memory_region>,
			<&main_r5fss1_core1_memory_region>;
};

&main_r5fss2_core0 {
	status = "okay";
	mboxes = <&mailbox0_cluster3 &mbox_main_r5fss2_core0>;
	memory-region = <&main_r5fss2_core0_dma_memory_region>,
			<&main_r5fss2_core0_memory_region>;
};

&main_r5fss2_core1 {
	status = "okay";
	mboxes = <&mailbox0_cluster3 &mbox_main_r5fss2_core1>;
	memory-region = <&main_r5fss2_core1_dma_memory_region>,
			<&main_r5fss2_core1_memory_region>;
};

&c71_0 {
	status = "okay";
	mboxes = <&mailbox0_cluster4 &mbox_c71_0>;
	memory-region = <&c71_0_dma_memory_region>,
			<&c71_0_memory_region>;
};

&c71_1 {
	status = "okay";
	mboxes = <&mailbox0_cluster4 &mbox_c71_1>;
	memory-region = <&c71_1_dma_memory_region>,
			<&c71_1_memory_region>;
};

&c71_2 {
	status = "okay";
	mboxes = <&mailbox0_cluster5 &mbox_c71_2>;
	memory-region = <&c71_2_dma_memory_region>,
			<&c71_2_memory_region>;
};

&c71_3 {
	status = "okay";
	mboxes = <&mailbox0_cluster5 &mbox_c71_3>;
	memory-region = <&c71_3_dma_memory_region>,
			<&c71_3_memory_region>;
};

&tscadc0 {
	pinctrl-0 = <&mcu_adc0_pins_default>;
	pinctrl-names = "default";
	status = "okay";
	adc {
		ti,adc-channels = <0 1 2 3 4 5 6 7>;
	};
};

&tscadc1 {
	pinctrl-0 = <&mcu_adc1_pins_default>;
	pinctrl-names = "default";
	status = "okay";
	adc {
		ti,adc-channels = <0 1 2 3 4 5 6 7>;
	};
};

&serdes_refclk {
	status = "okay";
	clock-frequency = <100000000>;
};

&dss {
	status = "okay";
	assigned-clocks = <&k3_clks 218 2>,
			  <&k3_clks 218 5>,
			  <&k3_clks 218 14>,
			  <&k3_clks 218 18>;
	assigned-clock-parents = <&k3_clks 218 3>,
				 <&k3_clks 218 7>,
				 <&k3_clks 218 16>,
				 <&k3_clks 218 22>;
};

&serdes_wiz4 {
	status = "okay";
};

&serdes4 {
	status = "okay";
	serdes4_dp_link: phy@0 {
		reg = <0>;
		cdns,num-lanes = <4>;
		#phy-cells = <0>;
		cdns,phy-type = <PHY_TYPE_DP>;
		resets = <&serdes_wiz4 1>, <&serdes_wiz4 2>,
			 <&serdes_wiz4 3>, <&serdes_wiz4 4>;
	};
};

&mhdp {
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&dp0_pins_default>;
	phys = <&serdes4_dp_link>;
	phy-names = "dpphy";
};

&dss_ports {
	/* DP */
	port {
		dpi0_out: endpoint {
			remote-endpoint = <&dp0_in>;
		};
	};
};

&main_i2c4 {
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&main_i2c4_pins_default>;
	clock-frequency = <400000>;

	exp4: gpio@20 {
		compatible = "ti,tca6408";
		reg = <0x20>;
		gpio-controller;
		#gpio-cells = <2>;
	};
};

&dp0_ports {
	port@0 {
		reg = <0>;

		dp0_in: endpoint {
			remote-endpoint = <&dpi0_out>;
		};
	};

	port@4 {
		reg = <4>;

		dp0_out: endpoint {
			remote-endpoint = <&dp0_connector_in>;
		};
	};
};