diff --git a/Documentation/devicetree/bindings/serial/8250.yaml b/Documentation/devicetree/bindings/serial/8250.yaml
index 5f6b113..6258f5f 100644
--- a/Documentation/devicetree/bindings/serial/8250.yaml
+++ b/Documentation/devicetree/bindings/serial/8250.yaml
@@ -62,6 +62,7 @@
       - const: mrvl,pxa-uart
       - const: nuvoton,wpcm450-uart
       - const: nuvoton,npcm750-uart
+      - const: nuvoton,npcm845-uart
       - const: nvidia,tegra20-uart
       - const: nxp,lpc3220-uart
       - items:
diff --git a/Documentation/devicetree/bindings/serial/mediatek,uart.yaml b/Documentation/devicetree/bindings/serial/mediatek,uart.yaml
new file mode 100644
index 0000000..4ff27d6
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/mediatek,uart.yaml
@@ -0,0 +1,120 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/mediatek,uart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Universal Asynchronous Receiver/Transmitter (UART)
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+
+allOf:
+  - $ref: serial.yaml#
+
+description: |
+  The MediaTek UART is based on the basic 8250 UART and compatible
+  with 16550A, with enhancements for high speed baud rates and
+  support for DMA.
+
+properties:
+  compatible:
+    oneOf:
+      - const: mediatek,mt6577-uart
+      - items:
+          - enum:
+              - mediatek,mt2701-uart
+              - mediatek,mt2712-uart
+              - mediatek,mt6580-uart
+              - mediatek,mt6582-uart
+              - mediatek,mt6589-uart
+              - mediatek,mt6755-uart
+              - mediatek,mt6765-uart
+              - mediatek,mt6779-uart
+              - mediatek,mt6795-uart
+              - mediatek,mt6797-uart
+              - mediatek,mt7622-uart
+              - mediatek,mt7623-uart
+              - mediatek,mt7629-uart
+              - mediatek,mt7986-uart
+              - mediatek,mt8127-uart
+              - mediatek,mt8135-uart
+              - mediatek,mt8173-uart
+              - mediatek,mt8183-uart
+              - mediatek,mt8186-uart
+              - mediatek,mt8192-uart
+              - mediatek,mt8195-uart
+              - mediatek,mt8516-uart
+          - const: mediatek,mt6577-uart
+
+  reg:
+    description: The base address of the UART register bank
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: The clock the baudrate is derived from
+      - description: The bus clock for register accesses
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: baud
+      - const: bus
+
+  dmas:
+    items:
+      - description: phandle to TX DMA
+      - description: phandle to RX DMA
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    description:
+      The UART interrupt and optionally the RX in-band wakeup interrupt.
+    minItems: 1
+    items:
+      - const: uart
+      - const: wakeup
+
+  pinctrl-0: true
+  pinctrl-1: true
+
+  pinctrl-names:
+    minItems: 1
+    items:
+      - const: default
+      - const: sleep
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    serial@11006000 {
+        compatible = "mediatek,mt6589-uart", "mediatek,mt6577-uart";
+        reg = <0x11006000 0x400>;
+        interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>,
+                     <GIC_SPI 52 IRQ_TYPE_EDGE_FALLING>;
+        interrupt-names = "uart", "wakeup";
+        clocks = <&uart_clk>, <&bus_clk>;
+        clock-names = "baud", "bus";
+        pinctrl-0 = <&uart_pin>;
+        pinctrl-1 = <&uart_pin_sleep>;
+        pinctrl-names = "default", "sleep";
+    };
diff --git a/Documentation/devicetree/bindings/serial/mtk-uart.txt b/Documentation/devicetree/bindings/serial/mtk-uart.txt
deleted file mode 100644
index 113b5d6..0000000
--- a/Documentation/devicetree/bindings/serial/mtk-uart.txt
+++ /dev/null
@@ -1,59 +0,0 @@
-* MediaTek Universal Asynchronous Receiver/Transmitter (UART)
-
-Required properties:
-- compatible should contain:
-  * "mediatek,mt2701-uart" for MT2701 compatible UARTS
-  * "mediatek,mt2712-uart" for MT2712 compatible UARTS
-  * "mediatek,mt6580-uart" for MT6580 compatible UARTS
-  * "mediatek,mt6582-uart" for MT6582 compatible UARTS
-  * "mediatek,mt6589-uart" for MT6589 compatible UARTS
-  * "mediatek,mt6755-uart" for MT6755 compatible UARTS
-  * "mediatek,mt6765-uart" for MT6765 compatible UARTS
-  * "mediatek,mt6779-uart" for MT6779 compatible UARTS
-  * "mediatek,mt6795-uart" for MT6795 compatible UARTS
-  * "mediatek,mt6797-uart" for MT6797 compatible UARTS
-  * "mediatek,mt7622-uart" for MT7622 compatible UARTS
-  * "mediatek,mt7623-uart" for MT7623 compatible UARTS
-  * "mediatek,mt7629-uart" for MT7629 compatible UARTS
-  * "mediatek,mt7986-uart", "mediatek,mt6577-uart" for MT7986 compatible UARTS
-  * "mediatek,mt8127-uart" for MT8127 compatible UARTS
-  * "mediatek,mt8135-uart" for MT8135 compatible UARTS
-  * "mediatek,mt8173-uart" for MT8173 compatible UARTS
-  * "mediatek,mt8183-uart", "mediatek,mt6577-uart" for MT8183 compatible UARTS
-  * "mediatek,mt8186-uart", "mediatek,mt6577-uart" for MT8183 compatible UARTS
-  * "mediatek,mt8192-uart", "mediatek,mt6577-uart" for MT8192 compatible UARTS
-  * "mediatek,mt8195-uart", "mediatek,mt6577-uart" for MT8195 compatible UARTS
-  * "mediatek,mt8516-uart" for MT8516 compatible UARTS
-  * "mediatek,mt6577-uart" for MT6577 and all of the above
-
-- reg: The base address of the UART register bank.
-
-- interrupts:
-  index 0: an interrupt specifier for the UART controller itself
-  index 1: optional, an interrupt specifier with edge sensitivity on Rx pin to
-           support Rx in-band wake up. If one would like to use this feature,
-           one must create an addtional pinctrl to reconfigure Rx pin to normal
-           GPIO before suspend.
-
-- clocks : Must contain an entry for each entry in clock-names.
-  See ../clocks/clock-bindings.txt for details.
-- clock-names:
-  - "baud": The clock the baudrate is derived from
-  - "bus": The bus clock for register accesses (optional)
-
-For compatibility with older device trees an unnamed clock is used for the
-baud clock if the baudclk does not exist. Do not use this for new designs.
-
-Example:
-
-	uart0: serial@11006000 {
-		compatible = "mediatek,mt6589-uart", "mediatek,mt6577-uart";
-		reg = <0x11006000 0x400>;
-		interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 52 IRQ_TYPE_EDGE_FALLING>;
-		clocks = <&uart_clk>, <&bus_clk>;
-		clock-names = "baud", "bus";
-		pinctrl-names = "default", "sleep";
-		pinctrl-0 = <&uart_pin>;
-		pinctrl-1 = <&uart_pin_sleep>;
-	};
diff --git a/Documentation/devicetree/bindings/serial/renesas,hscif.yaml b/Documentation/devicetree/bindings/serial/renesas,hscif.yaml
index 87180d9..1957b9d 100644
--- a/Documentation/devicetree/bindings/serial/renesas,hscif.yaml
+++ b/Documentation/devicetree/bindings/serial/renesas,hscif.yaml
@@ -57,6 +57,7 @@
       - items:
           - enum:
               - renesas,hscif-r8a779a0     # R-Car V3U
+              - renesas,hscif-r8a779f0     # R-Car S4-8
               - renesas,hscif-r8a779g0     # R-Car V4H
           - const: renesas,rcar-gen4-hscif # R-Car Gen4
           - const: renesas,hscif           # generic HSCIF compatible UART
diff --git a/Documentation/devicetree/bindings/serial/rs485.yaml b/Documentation/devicetree/bindings/serial/rs485.yaml
index f2c9c9f..90a1bab 100644
--- a/Documentation/devicetree/bindings/serial/rs485.yaml
+++ b/Documentation/devicetree/bindings/serial/rs485.yaml
@@ -22,12 +22,12 @@
         - description: Delay between rts signal and beginning of data sent in
             milliseconds. It corresponds to the delay before sending data.
           default: 0
-          maximum: 1000
+          maximum: 100
         - description: Delay between end of data sent and rts signal in milliseconds.
             It corresponds to the delay after sending data and actual release
             of the line.
           default: 0
-          maximum: 1000
+          maximum: 100
 
   rs485-rts-active-low:
     description: drive RTS low when sending (default is high).
diff --git a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml
index 12137fe..dc74643 100644
--- a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml
+++ b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml
@@ -33,7 +33,9 @@
               - rockchip,rk3368-uart
               - rockchip,rk3399-uart
               - rockchip,rk3568-uart
+              - rockchip,rk3588-uart
               - rockchip,rv1108-uart
+              - rockchip,rv1126-uart
           - const: snps,dw-apb-uart
       - items:
           - enum:
diff --git a/Documentation/driver-api/serial/driver.rst b/Documentation/driver-api/serial/driver.rst
index 7ef83fd..23c6b95 100644
--- a/Documentation/driver-api/serial/driver.rst
+++ b/Documentation/driver-api/serial/driver.rst
@@ -25,10 +25,10 @@
 ---------------
 
 The serial core provides a few helper functions.  This includes identifing
-the correct port structure (via uart_get_console) and decoding command line
-arguments (uart_parse_options).
+the correct port structure (via uart_get_console()) and decoding command line
+arguments (uart_parse_options()).
 
-There is also a helper function (uart_console_write) which performs a
+There is also a helper function (uart_console_write()) which performs a
 character by character write, translating newlines to CRLF sequences.
 Driver writers are recommended to use this function rather than implementing
 their own version.
@@ -39,7 +39,7 @@
 
 It is the responsibility of the low level hardware driver to perform the
 necessary locking using port->lock.  There are some exceptions (which
-are described in the uart_ops listing below.)
+are described in the struct uart_ops listing below.)
 
 There are two locks.  A per-port spinlock, and an overall semaphore.
 
@@ -63,442 +63,20 @@
 uart_ops
 --------
 
-The uart_ops structure is the main interface between serial_core and the
-hardware specific driver.  It contains all the methods to control the
-hardware.
-
-  tx_empty(port)
-	This function tests whether the transmitter fifo and shifter
-	for the port described by 'port' is empty.  If it is empty,
-	this function should return TIOCSER_TEMT, otherwise return 0.
-	If the port does not support this operation, then it should
-	return TIOCSER_TEMT.
-
-	Locking: none.
-
-	Interrupts: caller dependent.
-
-	This call must not sleep
-
-  set_mctrl(port, mctrl)
-	This function sets the modem control lines for port described
-	by 'port' to the state described by mctrl.  The relevant bits
-	of mctrl are:
-
-		- TIOCM_RTS	RTS signal.
-		- TIOCM_DTR	DTR signal.
-		- TIOCM_OUT1	OUT1 signal.
-		- TIOCM_OUT2	OUT2 signal.
-		- TIOCM_LOOP	Set the port into loopback mode.
-
-	If the appropriate bit is set, the signal should be driven
-	active.  If the bit is clear, the signal should be driven
-	inactive.
-
-	Locking: port->lock taken.
-
-	Interrupts: locally disabled.
-
-	This call must not sleep
-
-  get_mctrl(port)
-	Returns the current state of modem control inputs.  The state
-	of the outputs should not be returned, since the core keeps
-	track of their state.  The state information should include:
-
-		- TIOCM_CAR	state of DCD signal
-		- TIOCM_CTS	state of CTS signal
-		- TIOCM_DSR	state of DSR signal
-		- TIOCM_RI	state of RI signal
-
-	The bit is set if the signal is currently driven active.  If
-	the port does not support CTS, DCD or DSR, the driver should
-	indicate that the signal is permanently active.  If RI is
-	not available, the signal should not be indicated as active.
-
-	Locking: port->lock taken.
-
-	Interrupts: locally disabled.
-
-	This call must not sleep
-
-  stop_tx(port)
-	Stop transmitting characters.  This might be due to the CTS
-	line becoming inactive or the tty layer indicating we want
-	to stop transmission due to an XOFF character.
-
-	The driver should stop transmitting characters as soon as
-	possible.
-
-	Locking: port->lock taken.
-
-	Interrupts: locally disabled.
-
-	This call must not sleep
-
-  start_tx(port)
-	Start transmitting characters.
-
-	Locking: port->lock taken.
-
-	Interrupts: locally disabled.
-
-	This call must not sleep
-
-  throttle(port)
-	Notify the serial driver that input buffers for the line discipline are
-	close to full, and it should somehow signal that no more characters
-	should be sent to the serial port.
-	This will be called only if hardware assisted flow control is enabled.
-
-	Locking: serialized with .unthrottle() and termios modification by the
-	tty layer.
-
-  unthrottle(port)
-	Notify the serial driver that characters can now be sent to the serial
-	port without fear of overrunning the input buffers of the line
-	disciplines.
-
-	This will be called only if hardware assisted flow control is enabled.
-
-	Locking: serialized with .throttle() and termios modification by the
-	tty layer.
-
-  send_xchar(port,ch)
-	Transmit a high priority character, even if the port is stopped.
-	This is used to implement XON/XOFF flow control and tcflow().  If
-	the serial driver does not implement this function, the tty core
-	will append the character to the circular buffer and then call
-	start_tx() / stop_tx() to flush the data out.
-
-	Do not transmit if ch == '\0' (__DISABLED_CHAR).
-
-	Locking: none.
-
-	Interrupts: caller dependent.
-
-  stop_rx(port)
-	Stop receiving characters; the port is in the process of
-	being closed.
-
-	Locking: port->lock taken.
-
-	Interrupts: locally disabled.
-
-	This call must not sleep
-
-  enable_ms(port)
-	Enable the modem status interrupts.
-
-	This method may be called multiple times.  Modem status
-	interrupts should be disabled when the shutdown method is
-	called.
-
-	Locking: port->lock taken.
-
-	Interrupts: locally disabled.
-
-	This call must not sleep
-
-  break_ctl(port,ctl)
-	Control the transmission of a break signal.  If ctl is
-	nonzero, the break signal should be transmitted.  The signal
-	should be terminated when another call is made with a zero
-	ctl.
-
-	Locking: caller holds tty_port->mutex
-
-  startup(port)
-	Grab any interrupt resources and initialise any low level driver
-	state.  Enable the port for reception.  It should not activate
-	RTS nor DTR; this will be done via a separate call to set_mctrl.
-
-	This method will only be called when the port is initially opened.
-
-	Locking: port_sem taken.
-
-	Interrupts: globally disabled.
-
-  shutdown(port)
-	Disable the port, disable any break condition that may be in
-	effect, and free any interrupt resources.  It should not disable
-	RTS nor DTR; this will have already been done via a separate
-	call to set_mctrl.
-
-	Drivers must not access port->state once this call has completed.
-
-	This method will only be called when there are no more users of
-	this port.
-
-	Locking: port_sem taken.
-
-	Interrupts: caller dependent.
-
-  flush_buffer(port)
-	Flush any write buffers, reset any DMA state and stop any
-	ongoing DMA transfers.
-
-	This will be called whenever the port->state->xmit circular
-	buffer is cleared.
-
-	Locking: port->lock taken.
-
-	Interrupts: locally disabled.
-
-	This call must not sleep
-
-  set_termios(port,termios,oldtermios)
-	Change the port parameters, including word length, parity, stop
-	bits.  Update read_status_mask and ignore_status_mask to indicate
-	the types of events we are interested in receiving.  Relevant
-	termios->c_cflag bits are:
-
-		CSIZE
-			- word size
-		CSTOPB
-			- 2 stop bits
-		PARENB
-			- parity enable
-		PARODD
-			- odd parity (when PARENB is in force)
-		CREAD
-			- enable reception of characters (if not set,
-			  still receive characters from the port, but
-			  throw them away.
-		CRTSCTS
-			- if set, enable CTS status change reporting
-		CLOCAL
-			- if not set, enable modem status change
-			  reporting.
-
-	Relevant termios->c_iflag bits are:
-
-		INPCK
-			- enable frame and parity error events to be
-			  passed to the TTY layer.
-		BRKINT / PARMRK
-			- both of these enable break events to be
-			  passed to the TTY layer.
-
-		IGNPAR
-			- ignore parity and framing errors
-		IGNBRK
-			- ignore break errors,  If IGNPAR is also
-			  set, ignore overrun errors as well.
-
-	The interaction of the iflag bits is as follows (parity error
-	given as an example):
-
-	=============== ======= ======  =============================
-	Parity error	INPCK	IGNPAR
-	=============== ======= ======  =============================
-	n/a		0	n/a	character received, marked as
-					TTY_NORMAL
-	None		1	n/a	character received, marked as
-					TTY_NORMAL
-	Yes		1	0	character received, marked as
-					TTY_PARITY
-	Yes		1	1	character discarded
-	=============== ======= ======  =============================
-
-	Other flags may be used (eg, xon/xoff characters) if your
-	hardware supports hardware "soft" flow control.
-
-	Locking: caller holds tty_port->mutex
-
-	Interrupts: caller dependent.
-
-	This call must not sleep
-
-  set_ldisc(port,termios)
-	Notifier for discipline change. See ../tty/tty_ldisc.rst.
-
-	Locking: caller holds tty_port->mutex
-
-  pm(port,state,oldstate)
-	Perform any power management related activities on the specified
-	port.  State indicates the new state (defined by
-	enum uart_pm_state), oldstate indicates the previous state.
-
-	This function should not be used to grab any resources.
-
-	This will be called when the port is initially opened and finally
-	closed, except when the port is also the system console.  This
-	will occur even if CONFIG_PM is not set.
-
-	Locking: none.
-
-	Interrupts: caller dependent.
-
-  type(port)
-	Return a pointer to a string constant describing the specified
-	port, or return NULL, in which case the string 'unknown' is
-	substituted.
-
-	Locking: none.
-
-	Interrupts: caller dependent.
-
-  release_port(port)
-	Release any memory and IO region resources currently in use by
-	the port.
-
-	Locking: none.
-
-	Interrupts: caller dependent.
-
-  request_port(port)
-	Request any memory and IO region resources required by the port.
-	If any fail, no resources should be registered when this function
-	returns, and it should return -EBUSY on failure.
-
-	Locking: none.
-
-	Interrupts: caller dependent.
-
-  config_port(port,type)
-	Perform any autoconfiguration steps required for the port.  `type`
-	contains a bit mask of the required configuration.  UART_CONFIG_TYPE
-	indicates that the port requires detection and identification.
-	port->type should be set to the type found, or PORT_UNKNOWN if
-	no port was detected.
-
-	UART_CONFIG_IRQ indicates autoconfiguration of the interrupt signal,
-	which should be probed using standard kernel autoprobing techniques.
-	This is not necessary on platforms where ports have interrupts
-	internally hard wired (eg, system on a chip implementations).
-
-	Locking: none.
-
-	Interrupts: caller dependent.
-
-  verify_port(port,serinfo)
-	Verify the new serial port information contained within serinfo is
-	suitable for this port type.
-
-	Locking: none.
-
-	Interrupts: caller dependent.
-
-  ioctl(port,cmd,arg)
-	Perform any port specific IOCTLs.  IOCTL commands must be defined
-	using the standard numbering system found in <asm/ioctl.h>
-
-	Locking: none.
-
-	Interrupts: caller dependent.
-
-  poll_init(port)
-	Called by kgdb to perform the minimal hardware initialization needed
-	to support poll_put_char() and poll_get_char().  Unlike ->startup()
-	this should not request interrupts.
-
-	Locking: tty_mutex and tty_port->mutex taken.
-
-	Interrupts: n/a.
-
-  poll_put_char(port,ch)
-	Called by kgdb to write a single character directly to the serial
-	port.  It can and should block until there is space in the TX FIFO.
-
-	Locking: none.
-
-	Interrupts: caller dependent.
-
-	This call must not sleep
-
-  poll_get_char(port)
-	Called by kgdb to read a single character directly from the serial
-	port.  If data is available, it should be returned; otherwise
-	the function should return NO_POLL_CHAR immediately.
-
-	Locking: none.
-
-	Interrupts: caller dependent.
-
-	This call must not sleep
+.. kernel-doc:: include/linux/serial_core.h
+   :identifiers: uart_ops
 
 Other functions
 ---------------
 
-uart_update_timeout(port,cflag,baud)
-	Update the FIFO drain timeout, port->timeout, according to the
-	number of bits, parity, stop bits and baud rate.
-
-	Locking: caller is expected to take port->lock
-
-	Interrupts: n/a
-
-uart_get_baud_rate(port,termios,old,min,max)
-	Return the numeric baud rate for the specified termios, taking
-	account of the special 38400 baud "kludge".  The B0 baud rate
-	is mapped to 9600 baud.
-
-	If the baud rate is not within min..max, then if old is non-NULL,
-	the original baud rate will be tried.  If that exceeds the
-	min..max constraint, 9600 baud will be returned.  termios will
-	be updated to the baud rate in use.
-
-	Note: min..max must always allow 9600 baud to be selected.
-
-	Locking: caller dependent.
-
-	Interrupts: n/a
-
-uart_get_divisor(port,baud)
-	Return the divisor (baud_base / baud) for the specified baud
-	rate, appropriately rounded.
-
-	If 38400 baud and custom divisor is selected, return the
-	custom divisor instead.
-
-	Locking: caller dependent.
-
-	Interrupts: n/a
-
-uart_match_port(port1,port2)
-	This utility function can be used to determine whether two
-	uart_port structures describe the same port.
-
-	Locking: n/a
-
-	Interrupts: n/a
-
-uart_write_wakeup(port)
-	A driver is expected to call this function when the number of
-	characters in the transmit buffer have dropped below a threshold.
-
-	Locking: port->lock should be held.
-
-	Interrupts: n/a
-
-uart_register_driver(drv)
-	Register a uart driver with the core driver.  We in turn register
-	with the tty layer, and initialise the core driver per-port state.
-
-	drv->port should be NULL, and the per-port structures should be
-	registered using uart_add_one_port after this call has succeeded.
-
-	Locking: none
-
-	Interrupts: enabled
-
-uart_unregister_driver()
-	Remove all references to a driver from the core driver.  The low
-	level driver must have removed all its ports via the
-	uart_remove_one_port() if it registered them with uart_add_one_port().
-
-	Locking: none
-
-	Interrupts: enabled
-
-**uart_suspend_port()**
-
-**uart_resume_port()**
-
-**uart_add_one_port()**
-
-**uart_remove_one_port()**
+.. kernel-doc:: drivers/tty/serial/serial_core.c
+   :identifiers: uart_update_timeout uart_get_baud_rate uart_get_divisor
+           uart_match_port uart_write_wakeup uart_register_driver
+           uart_unregister_driver uart_suspend_port uart_resume_port
+           uart_add_one_port uart_remove_one_port uart_console_write
+           uart_parse_earlycon uart_parse_options uart_set_options
+           uart_get_lsr_info uart_handle_dcd_change uart_handle_cts_change
+           uart_try_toggle_sysrq uart_get_console
 
 Other notes
 -----------
@@ -519,31 +97,7 @@
 
 Some helpers are provided in order to set/get modem control lines via GPIO.
 
-mctrl_gpio_init(port, idx):
-	This will get the {cts,rts,...}-gpios from device tree if they are
-	present and request them, set direction etc, and return an
-	allocated structure. `devm_*` functions are used, so there's no need
-	to call mctrl_gpio_free().
-	As this sets up the irq handling make sure to not handle changes to the
-	gpio input lines in your driver, too.
-
-mctrl_gpio_free(dev, gpios):
-	This will free the requested gpios in mctrl_gpio_init().
-	As `devm_*` functions are used, there's generally no need to call
-	this function.
-
-mctrl_gpio_to_gpiod(gpios, gidx)
-	This returns the gpio_desc structure associated to the modem line
-	index.
-
-mctrl_gpio_set(gpios, mctrl):
-	This will sets the gpios according to the mctrl state.
-
-mctrl_gpio_get(gpios, mctrl):
-	This will update mctrl with the gpios values.
-
-mctrl_gpio_enable_ms(gpios):
-	Enables irqs and handling of changes to the ms lines.
-
-mctrl_gpio_disable_ms(gpios):
-	Disables irqs and handling of changes to the ms lines.
+.. kernel-doc:: drivers/tty/serial/serial_mctrl_gpio.c
+   :identifiers: mctrl_gpio_init mctrl_gpio_free mctrl_gpio_to_gpiod
+           mctrl_gpio_set mctrl_gpio_get mctrl_gpio_enable_ms
+           mctrl_gpio_disable_ms
diff --git a/Documentation/driver-api/serial/serial-rs485.rst b/Documentation/driver-api/serial/serial-rs485.rst
index 6bc824f9..6ebad75 100644
--- a/Documentation/driver-api/serial/serial-rs485.rst
+++ b/Documentation/driver-api/serial/serial-rs485.rst
@@ -38,10 +38,14 @@
    the values given by the device tree.
 
    Any driver for devices capable of working both as RS232 and RS485 should
-   implement the rs485_config callback in the uart_port structure. The
-   serial_core calls rs485_config to do the device specific part in response
-   to TIOCSRS485 and TIOCGRS485 ioctls (see below). The rs485_config callback
-   receives a pointer to struct serial_rs485.
+   implement the rs485_config callback and provide rs485_supported in the
+   uart_port structure. The serial core calls rs485_config to do the device
+   specific part in response to TIOCSRS485 ioctl (see below). The rs485_config
+   callback receives a pointer to a sanitizated serial_rs485 structure. The
+   serial_rs485 userspace provides is sanitized before calling rs485_config
+   using rs485_supported that indicates what RS485 features the driver supports
+   for the uart_port. TIOCGRS485 ioctl can be used to read back the
+   serial_rs485 structure matching to the current configuration.
 
 4. Usage from user-level
 ========================
@@ -95,7 +99,31 @@
 		/* Error handling. See errno. */
 	}
 
-5. References
+5. Multipoint Addressing
+========================
+
+   The Linux kernel provides addressing mode for multipoint RS-485 serial
+   communications line. The addressing mode is enabled with SER_RS485_ADDRB
+   flag in serial_rs485. Struct serial_rs485 has two additional flags and
+   fields for enabling receive and destination addresses.
+
+   Address mode flags:
+	- SER_RS485_ADDRB: Enabled addressing mode (sets also ADDRB in termios).
+	- SER_RS485_ADDR_RECV: Receive (filter) address enabled.
+	- SER_RS485_ADDR_DEST: Set destination address.
+
+   Address fields (enabled with corresponding SER_RS485_ADDR_* flag):
+	- addr_recv: Receive address.
+	- addr_dest: Destination address.
+
+   Once a receive address is set, the communication can occur only with the
+   particular device and other peers are filtered out. It is left up to the
+   receiver side to enforce the filtering. Receive address will be cleared
+   if SER_RS485_ADDR_RECV is not set.
+
+   Note: not all devices supporting RS485 support multipoint addressing.
+
+6. References
 =============
 
  [1]	include/uapi/linux/serial.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 905567a..32f51b6 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -19622,8 +19622,9 @@
 F:	drivers/gpio/gpio-creg-snps.c
 
 SYNOPSYS DESIGNWARE 8250 UART DRIVER
+M:	Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
 R:	Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-S:	Maintained
+S:	Supported
 F:	drivers/tty/serial/8250/8250_dw.c
 F:	drivers/tty/serial/8250/8250_dwlib.*
 F:	drivers/tty/serial/8250/8250_lpss.c
diff --git a/arch/mips/ath79/early_printk.c b/arch/mips/ath79/early_printk.c
index 8751d06..34c4dfd 100644
--- a/arch/mips/ath79/early_printk.c
+++ b/arch/mips/ath79/early_printk.c
@@ -8,6 +8,7 @@
 
 #include <linux/io.h>
 #include <linux/errno.h>
+#include <linux/serial.h>
 #include <linux/serial_reg.h>
 #include <asm/addrspace.h>
 #include <asm/setup.h>
@@ -18,38 +19,34 @@
 
 static void (*_prom_putchar)(char);
 
-static inline void prom_putchar_wait(void __iomem *reg, u32 mask, u32 val)
+static inline void prom_putchar_wait(void __iomem *reg, u32 val)
 {
 	u32 t;
 
 	do {
 		t = __raw_readl(reg);
-		if ((t & mask) == val)
+		if ((t & val) == val)
 			break;
 	} while (1);
 }
 
-#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
-
 static void prom_putchar_ar71xx(char ch)
 {
 	void __iomem *base = (void __iomem *)(KSEG1ADDR(AR71XX_UART_BASE));
 
-	prom_putchar_wait(base + UART_LSR * 4, BOTH_EMPTY, BOTH_EMPTY);
+	prom_putchar_wait(base + UART_LSR * 4, UART_LSR_BOTH_EMPTY);
 	__raw_writel((unsigned char)ch, base + UART_TX * 4);
-	prom_putchar_wait(base + UART_LSR * 4, BOTH_EMPTY, BOTH_EMPTY);
+	prom_putchar_wait(base + UART_LSR * 4, UART_LSR_BOTH_EMPTY);
 }
 
 static void prom_putchar_ar933x(char ch)
 {
 	void __iomem *base = (void __iomem *)(KSEG1ADDR(AR933X_UART_BASE));
 
-	prom_putchar_wait(base + AR933X_UART_DATA_REG, AR933X_UART_DATA_TX_CSR,
-			  AR933X_UART_DATA_TX_CSR);
+	prom_putchar_wait(base + AR933X_UART_DATA_REG, AR933X_UART_DATA_TX_CSR);
 	__raw_writel(AR933X_UART_DATA_TX_CSR | (unsigned char)ch,
 		     base + AR933X_UART_DATA_REG);
-	prom_putchar_wait(base + AR933X_UART_DATA_REG, AR933X_UART_DATA_TX_CSR,
-			  AR933X_UART_DATA_TX_CSR);
+	prom_putchar_wait(base + AR933X_UART_DATA_REG, AR933X_UART_DATA_TX_CSR);
 }
 
 static void prom_putchar_dummy(char ch)
diff --git a/drivers/accessibility/braille/braille_console.c b/drivers/accessibility/braille/braille_console.c
index fdc6b593..c4d54a5 100644
--- a/drivers/accessibility/braille/braille_console.c
+++ b/drivers/accessibility/braille/braille_console.c
@@ -131,7 +131,7 @@ static void vc_refresh(struct vc_data *vc)
 	for (i = 0; i < WIDTH; i++) {
 		u16 glyph = screen_glyph(vc,
 				2 * (vc_x + i) + vc_y * vc->vc_size_row);
-		buf[i] = inverse_translate(vc, glyph, 1);
+		buf[i] = inverse_translate(vc, glyph, true);
 	}
 	braille_write(buf);
 }
diff --git a/drivers/accessibility/speakup/main.c b/drivers/accessibility/speakup/main.c
index d726537..f522652 100644
--- a/drivers/accessibility/speakup/main.c
+++ b/drivers/accessibility/speakup/main.c
@@ -470,7 +470,7 @@ static u16 get_char(struct vc_data *vc, u16 *pos, u_char *attribs)
 			c |= 0x100;
 		}
 
-		ch = inverse_translate(vc, c, 1);
+		ch = inverse_translate(vc, c, true);
 		*attribs = (w & 0xff00) >> 8;
 	}
 	return ch;
diff --git a/drivers/accessibility/speakup/serialio.h b/drivers/accessibility/speakup/serialio.h
index 6f8f86f..b4f9a19 100644
--- a/drivers/accessibility/speakup/serialio.h
+++ b/drivers/accessibility/speakup/serialio.h
@@ -33,9 +33,8 @@ struct old_serial_port {
 #define NUM_DISABLE_TIMEOUTS 3
 /* buffer timeout in ms */
 #define SPK_TIMEOUT 100
-#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
 
 #define spk_serial_tx_busy() \
-	((inb(speakup_info.port_tts + UART_LSR) & BOTH_EMPTY) != BOTH_EMPTY)
+	(!uart_lsr_tx_empty(inb(speakup_info.port_tts + UART_LSR)))
 
 #endif
diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
index d170c88..7bc9292 100644
--- a/drivers/of/fdt.c
+++ b/drivers/of/fdt.c
@@ -1024,6 +1024,7 @@ int __init early_init_dt_scan_chosen_stdout(void)
 	int l;
 	const struct earlycon_id *match;
 	const void *fdt = initial_boot_params;
+	int ret;
 
 	offset = fdt_path_offset(fdt, "/chosen");
 	if (offset < 0)
@@ -1056,7 +1057,8 @@ int __init early_init_dt_scan_chosen_stdout(void)
 		if (fdt_node_check_compatible(fdt, offset, match->compatible))
 			continue;
 
-		if (of_setup_earlycon(match, offset, options) == 0)
+		ret = of_setup_earlycon(match, offset, options);
+		if (!ret || ret == -EALREADY)
 			return 0;
 	}
 	return -ENODEV;
diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c
index afb2d37..81e7f64 100644
--- a/drivers/tty/amiserial.c
+++ b/drivers/tty/amiserial.c
@@ -12,7 +12,7 @@
  * (non hardware specific) changes to serial.c.
  *
  * The port is registered with the tty driver as minor device 64, and
- * therefore other ports should should only use 65 upwards.
+ * therefore other ports should only use 65 upwards.
  *
  * Richard Lucock 28/12/99
  *
@@ -51,6 +51,7 @@
 #include <linux/seq_file.h>
 #include <linux/serial.h>
 #include <linux/serial_reg.h>
+#include <linux/serial_core.h>
 #include <linux/sched.h>
 #include <linux/signal.h>
 #include <linux/slab.h>
@@ -283,12 +284,12 @@ static void transmit_chars(struct serial_state *info)
 
 	amiga_custom.serdat = info->xmit.buf[info->xmit.tail++] | 0x100;
 	mb();
-	info->xmit.tail = info->xmit.tail & (SERIAL_XMIT_SIZE-1);
+	info->xmit.tail = info->xmit.tail & (UART_XMIT_SIZE - 1);
 	info->icount.tx++;
 
 	if (CIRC_CNT(info->xmit.head,
 		     info->xmit.tail,
-		     SERIAL_XMIT_SIZE) < WAKEUP_CHARS)
+		     UART_XMIT_SIZE) < WAKEUP_CHARS)
 		tty_wakeup(info->tport.tty);
 
 #ifdef SERIAL_DEBUG_INTR
@@ -708,13 +709,13 @@ static int rs_put_char(struct tty_struct *tty, unsigned char ch)
 	local_irq_save(flags);
 	if (CIRC_SPACE(info->xmit.head,
 		       info->xmit.tail,
-		       SERIAL_XMIT_SIZE) == 0) {
+		       UART_XMIT_SIZE) == 0) {
 		local_irq_restore(flags);
 		return 0;
 	}
 
 	info->xmit.buf[info->xmit.head++] = ch;
-	info->xmit.head &= SERIAL_XMIT_SIZE-1;
+	info->xmit.head &= UART_XMIT_SIZE - 1;
 	local_irq_restore(flags);
 	return 1;
 }
@@ -753,15 +754,14 @@ static int rs_write(struct tty_struct * tty, const unsigned char *buf, int count
 	while (1) {
 		c = CIRC_SPACE_TO_END(info->xmit.head,
 				      info->xmit.tail,
-				      SERIAL_XMIT_SIZE);
+				      UART_XMIT_SIZE);
 		if (count < c)
 			c = count;
 		if (c <= 0) {
 			break;
 		}
 		memcpy(info->xmit.buf + info->xmit.head, buf, c);
-		info->xmit.head = ((info->xmit.head + c) &
-				   (SERIAL_XMIT_SIZE-1));
+		info->xmit.head = (info->xmit.head + c) & (UART_XMIT_SIZE - 1);
 		buf += c;
 		count -= c;
 		ret += c;
@@ -788,14 +788,14 @@ static unsigned int rs_write_room(struct tty_struct *tty)
 {
 	struct serial_state *info = tty->driver_data;
 
-	return CIRC_SPACE(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
+	return CIRC_SPACE(info->xmit.head, info->xmit.tail, UART_XMIT_SIZE);
 }
 
 static unsigned int rs_chars_in_buffer(struct tty_struct *tty)
 {
 	struct serial_state *info = tty->driver_data;
 
-	return CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
+	return CIRC_CNT(info->xmit.head, info->xmit.tail, UART_XMIT_SIZE);
 }
 
 static void rs_flush_buffer(struct tty_struct *tty)
diff --git a/drivers/tty/mips_ejtag_fdc.c b/drivers/tty/mips_ejtag_fdc.c
index 31dceb5..e81701a 100644
--- a/drivers/tty/mips_ejtag_fdc.c
+++ b/drivers/tty/mips_ejtag_fdc.c
@@ -916,7 +916,7 @@ static int mips_ejtag_fdc_tty_probe(struct mips_cdmm_device *dev)
 	mips_ejtag_fdc_write(priv, REG_FDCFG, cfg);
 
 	/* Make each port's xmit FIFO big enough to fill FDC TX FIFO */
-	priv->xmit_size = min(tx_fifo * 4, (unsigned int)SERIAL_XMIT_SIZE);
+	priv->xmit_size = min(tx_fifo * 4, (unsigned int)UART_XMIT_SIZE);
 
 	driver = tty_alloc_driver(NUM_TTY_CHANNELS, TTY_DRIVER_REAL_RAW);
 	if (IS_ERR(driver))
@@ -1222,7 +1222,7 @@ static void kgdbfdc_push_one(void)
 
 	/* Construct a word from any data in buffer */
 	word = mips_ejtag_fdc_encode(bufs, &kgdbfdc_wbuflen, 1);
-	/* Relocate any remaining data to beginnning of buffer */
+	/* Relocate any remaining data to beginning of buffer */
 	kgdbfdc_wbuflen -= word.bytes;
 	for (i = 0; i < kgdbfdc_wbuflen; ++i)
 		kgdbfdc_wbuf[i] = kgdbfdc_wbuf[i + word.bytes];
diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index fd4d24f..caa5c14 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -5,6 +5,14 @@
  *
  *	* THIS IS A DEVELOPMENT SNAPSHOT IT IS NOT A FINAL RELEASE *
  *
+ * Outgoing path:
+ * tty -> DLCI fifo -> scheduler -> GSM MUX data queue    ---o-> ldisc
+ * control message               -> GSM MUX control queue --´
+ *
+ * Incoming path:
+ * ldisc -> gsm_queue() -o--> tty
+ *                        `-> gsm_control_response()
+ *
  * TO DO:
  *	Mostly done:	ioctls for setting modes/timing
  *	Partly done:	hooks so you can pull off frames to non tty devs
@@ -210,6 +218,9 @@ struct gsm_mux {
 	/* Events on the GSM channel */
 	wait_queue_head_t event;
 
+	/* ldisc send work */
+	struct work_struct tx_work;
+
 	/* Bits for GSM mode decoding */
 
 	/* Framing Layer */
@@ -235,14 +246,17 @@ struct gsm_mux {
 	struct gsm_dlci *dlci[NUM_DLCI];
 	int old_c_iflag;		/* termios c_iflag value before attach */
 	bool constipated;		/* Asked by remote to shut up */
+	bool has_devices;		/* Devices were registered */
 
 	spinlock_t tx_lock;
 	unsigned int tx_bytes;		/* TX data outstanding */
 #define TX_THRESH_HI		8192
 #define TX_THRESH_LO		2048
-	struct list_head tx_list;	/* Pending data packets */
+	struct list_head tx_ctrl_list;	/* Pending control packets */
+	struct list_head tx_data_list;	/* Pending data packets */
 
 	/* Control messages */
+	struct timer_list kick_timer;	/* Kick TX queuing on timeout */
 	struct timer_list t2_timer;	/* Retransmit timer for commands */
 	int cretries;			/* Command retry counter */
 	struct gsm_control *pending_cmd;/* Our current pending command */
@@ -369,6 +383,11 @@ static const u8 gsm_fcs8[256] = {
 
 static int gsmld_output(struct gsm_mux *gsm, u8 *data, int len);
 static int gsm_modem_update(struct gsm_dlci *dlci, u8 brk);
+static struct gsm_msg *gsm_data_alloc(struct gsm_mux *gsm, u8 addr, int len,
+								u8 ctrl);
+static int gsm_send_packet(struct gsm_mux *gsm, struct gsm_msg *msg);
+static void gsmld_write_trigger(struct gsm_mux *gsm);
+static void gsmld_write_task(struct work_struct *work);
 
 /**
  *	gsm_fcs_add	-	update FCS
@@ -420,6 +439,27 @@ static int gsm_read_ea(unsigned int *val, u8 c)
 }
 
 /**
+ *	gsm_read_ea_val	-	read a value until EA
+ *	@val: variable holding value
+ *	@data: buffer of data
+ *	@dlen: length of data
+ *
+ *	Processes an EA value. Updates the passed variable and
+ *	returns the processed data length.
+ */
+static unsigned int gsm_read_ea_val(unsigned int *val, const u8 *data, int dlen)
+{
+	unsigned int len = 0;
+
+	for (; dlen > 0; dlen--) {
+		len++;
+		if (gsm_read_ea(val, *data++))
+			break;
+	}
+	return len;
+}
+
+/**
  *	gsm_encode_modem	-	encode modem data bits
  *	@dlci: DLCI to encode from
  *
@@ -464,6 +504,68 @@ static void gsm_hex_dump_bytes(const char *fname, const u8 *data,
 }
 
 /**
+ *	gsm_register_devices	-	register all tty devices for a given mux index
+ *
+ *	@driver: the tty driver that describes the tty devices
+ *	@index:  the mux number is used to calculate the minor numbers of the
+ *	         ttys for this mux and may differ from the position in the
+ *	         mux array.
+ */
+static int gsm_register_devices(struct tty_driver *driver, unsigned int index)
+{
+	struct device *dev;
+	int i;
+	unsigned int base;
+
+	if (!driver || index >= MAX_MUX)
+		return -EINVAL;
+
+	base = index * NUM_DLCI; /* first minor for this index */
+	for (i = 1; i < NUM_DLCI; i++) {
+		/* Don't register device 0 - this is the control channel
+		 * and not a usable tty interface
+		 */
+		dev = tty_register_device(gsm_tty_driver, base + i, NULL);
+		if (IS_ERR(dev)) {
+			if (debug & 8)
+				pr_info("%s failed to register device minor %u",
+					__func__, base + i);
+			for (i--; i >= 1; i--)
+				tty_unregister_device(gsm_tty_driver, base + i);
+			return PTR_ERR(dev);
+		}
+	}
+
+	return 0;
+}
+
+/**
+ *	gsm_unregister_devices	-	unregister all tty devices for a given mux index
+ *
+ *	@driver: the tty driver that describes the tty devices
+ *	@index:  the mux number is used to calculate the minor numbers of the
+ *	         ttys for this mux and may differ from the position in the
+ *	         mux array.
+ */
+static void gsm_unregister_devices(struct tty_driver *driver,
+				   unsigned int index)
+{
+	int i;
+	unsigned int base;
+
+	if (!driver || index >= MAX_MUX)
+		return;
+
+	base = index * NUM_DLCI; /* first minor for this index */
+	for (i = 1; i < NUM_DLCI; i++) {
+		/* Don't unregister device 0 - this is the control
+		 * channel and not a usable tty interface
+		 */
+		tty_unregister_device(gsm_tty_driver, base + i);
+	}
+}
+
+/**
  *	gsm_print_packet	-	display a frame for debug
  *	@hdr: header to print before decode
  *	@addr: address EA from the frame
@@ -570,57 +672,73 @@ static int gsm_stuff_frame(const u8 *input, u8 *output, int len)
  *	@cr: command/response bit seen as initiator
  *	@control:  control byte including PF bit
  *
- *	Format up and transmit a control frame. These do not go via the
- *	queueing logic as they should be transmitted ahead of data when
- *	they are needed.
- *
- *	FIXME: Lock versus data TX path
+ *	Format up and transmit a control frame. These should be transmitted
+ *	ahead of data when they are needed.
  */
-
-static void gsm_send(struct gsm_mux *gsm, int addr, int cr, int control)
+static int gsm_send(struct gsm_mux *gsm, int addr, int cr, int control)
 {
-	int len;
-	u8 cbuf[10];
-	u8 ibuf[3];
+	struct gsm_msg *msg;
+	u8 *dp;
 	int ocr;
+	unsigned long flags;
+
+	msg = gsm_data_alloc(gsm, addr, 0, control);
+	if (!msg)
+		return -ENOMEM;
 
 	/* toggle C/R coding if not initiator */
 	ocr = cr ^ (gsm->initiator ? 0 : 1);
 
-	switch (gsm->encoding) {
-	case 0:
-		cbuf[0] = GSM0_SOF;
-		cbuf[1] = (addr << 2) | (ocr << 1) | EA;
-		cbuf[2] = control;
-		cbuf[3] = EA;	/* Length of data = 0 */
-		cbuf[4] = 0xFF - gsm_fcs_add_block(INIT_FCS, cbuf + 1, 3);
-		cbuf[5] = GSM0_SOF;
-		len = 6;
-		break;
-	case 1:
-	case 2:
-		/* Control frame + packing (but not frame stuffing) in mode 1 */
-		ibuf[0] = (addr << 2) | (ocr << 1) | EA;
-		ibuf[1] = control;
-		ibuf[2] = 0xFF - gsm_fcs_add_block(INIT_FCS, ibuf, 2);
-		/* Stuffing may double the size worst case */
-		len = gsm_stuff_frame(ibuf, cbuf + 1, 3);
-		/* Now add the SOF markers */
-		cbuf[0] = GSM1_SOF;
-		cbuf[len + 1] = GSM1_SOF;
-		/* FIXME: we can omit the lead one in many cases */
-		len += 2;
-		break;
-	default:
-		WARN_ON(1);
-		return;
+	msg->data -= 3;
+	dp = msg->data;
+	*dp++ = (addr << 2) | (ocr << 1) | EA;
+	*dp++ = control;
+
+	if (gsm->encoding == 0)
+		*dp++ = EA; /* Length of data = 0 */
+
+	*dp = 0xFF - gsm_fcs_add_block(INIT_FCS, msg->data, dp - msg->data);
+	msg->len = (dp - msg->data) + 1;
+
+	gsm_print_packet("Q->", addr, cr, control, NULL, 0);
+
+	spin_lock_irqsave(&gsm->tx_lock, flags);
+	list_add_tail(&msg->list, &gsm->tx_ctrl_list);
+	gsm->tx_bytes += msg->len;
+	spin_unlock_irqrestore(&gsm->tx_lock, flags);
+	gsmld_write_trigger(gsm);
+
+	return 0;
+}
+
+/**
+ *	gsm_dlci_clear_queues	-	remove outstanding data for a DLCI
+ *	@gsm: mux
+ *	@dlci: clear for this DLCI
+ *
+ *	Clears the data queues for a given DLCI.
+ */
+static void gsm_dlci_clear_queues(struct gsm_mux *gsm, struct gsm_dlci *dlci)
+{
+	struct gsm_msg *msg, *nmsg;
+	int addr = dlci->addr;
+	unsigned long flags;
+
+	/* Clear DLCI write fifo first */
+	spin_lock_irqsave(&dlci->lock, flags);
+	kfifo_reset(&dlci->fifo);
+	spin_unlock_irqrestore(&dlci->lock, flags);
+
+	/* Clear data packets in MUX write queue */
+	spin_lock_irqsave(&gsm->tx_lock, flags);
+	list_for_each_entry_safe(msg, nmsg, &gsm->tx_data_list, list) {
+		if (msg->addr != addr)
+			continue;
+		gsm->tx_bytes -= msg->len;
+		list_del(&msg->list);
+		kfree(msg);
 	}
-	gsmld_output(gsm, cbuf, len);
-	if (!gsm->initiator) {
-		cr = cr & gsm->initiator;
-		control = control & ~PF;
-	}
-	gsm_print_packet("-->", addr, cr, control, NULL, 0);
+	spin_unlock_irqrestore(&gsm->tx_lock, flags);
 }
 
 /**
@@ -683,59 +801,151 @@ static struct gsm_msg *gsm_data_alloc(struct gsm_mux *gsm, u8 addr, int len,
 }
 
 /**
- *	gsm_data_kick		-	poke the queue
+ *	gsm_send_packet	-	sends a single packet
  *	@gsm: GSM Mux
- *	@dlci: DLCI sending the data
+ *	@msg: packet to send
+ *
+ *	The given packet is encoded and sent out. No memory is freed.
+ *	The caller must hold the gsm tx lock.
+ */
+static int gsm_send_packet(struct gsm_mux *gsm, struct gsm_msg *msg)
+{
+	int len, ret;
+
+
+	if (gsm->encoding == 0) {
+		gsm->txframe[0] = GSM0_SOF;
+		memcpy(gsm->txframe + 1, msg->data, msg->len);
+		gsm->txframe[msg->len + 1] = GSM0_SOF;
+		len = msg->len + 2;
+	} else {
+		gsm->txframe[0] = GSM1_SOF;
+		len = gsm_stuff_frame(msg->data, gsm->txframe + 1, msg->len);
+		gsm->txframe[len + 1] = GSM1_SOF;
+		len += 2;
+	}
+
+	if (debug & 4)
+		gsm_hex_dump_bytes(__func__, gsm->txframe, len);
+	gsm_print_packet("-->", msg->addr, gsm->initiator, msg->ctrl, msg->data,
+			 msg->len);
+
+	ret = gsmld_output(gsm, gsm->txframe, len);
+	if (ret <= 0)
+		return ret;
+	/* FIXME: Can eliminate one SOF in many more cases */
+	gsm->tx_bytes -= msg->len;
+
+	return 0;
+}
+
+/**
+ *	gsm_is_flow_ctrl_msg	-	checks if flow control message
+ *	@msg: message to check
+ *
+ *	Returns true if the given message is a flow control command of the
+ *	control channel. False is returned in any other case.
+ */
+static bool gsm_is_flow_ctrl_msg(struct gsm_msg *msg)
+{
+	unsigned int cmd;
+
+	if (msg->addr > 0)
+		return false;
+
+	switch (msg->ctrl & ~PF) {
+	case UI:
+	case UIH:
+		cmd = 0;
+		if (gsm_read_ea_val(&cmd, msg->data + 2, msg->len - 2) < 1)
+			break;
+		switch (cmd & ~PF) {
+		case CMD_FCOFF:
+		case CMD_FCON:
+			return true;
+		}
+		break;
+	}
+
+	return false;
+}
+
+/**
+ *	gsm_data_kick	-	poke the queue
+ *	@gsm: GSM Mux
  *
  *	The tty device has called us to indicate that room has appeared in
- *	the transmit queue. Ram more data into the pipe if we have any
+ *	the transmit queue. Ram more data into the pipe if we have any.
  *	If we have been flow-stopped by a CMD_FCOFF, then we can only
- *	send messages on DLCI0 until CMD_FCON
- *
- *	FIXME: lock against link layer control transmissions
+ *	send messages on DLCI0 until CMD_FCON. The caller must hold
+ *	the gsm tx lock.
  */
-
-static void gsm_data_kick(struct gsm_mux *gsm, struct gsm_dlci *dlci)
+static int gsm_data_kick(struct gsm_mux *gsm)
 {
 	struct gsm_msg *msg, *nmsg;
-	int len;
+	struct gsm_dlci *dlci;
+	int ret;
 
-	list_for_each_entry_safe(msg, nmsg, &gsm->tx_list, list) {
-		if (gsm->constipated && msg->addr)
+	clear_bit(TTY_DO_WRITE_WAKEUP, &gsm->tty->flags);
+
+	/* Serialize control messages and control channel messages first */
+	list_for_each_entry_safe(msg, nmsg, &gsm->tx_ctrl_list, list) {
+		if (gsm->constipated && !gsm_is_flow_ctrl_msg(msg))
 			continue;
-		if (gsm->encoding != 0) {
-			gsm->txframe[0] = GSM1_SOF;
-			len = gsm_stuff_frame(msg->data,
-						gsm->txframe + 1, msg->len);
-			gsm->txframe[len + 1] = GSM1_SOF;
-			len += 2;
-		} else {
-			gsm->txframe[0] = GSM0_SOF;
-			memcpy(gsm->txframe + 1 , msg->data, msg->len);
-			gsm->txframe[msg->len + 1] = GSM0_SOF;
-			len = msg->len + 2;
-		}
-
-		if (debug & 4)
-			gsm_hex_dump_bytes(__func__, gsm->txframe, len);
-		if (gsmld_output(gsm, gsm->txframe, len) <= 0)
+		ret = gsm_send_packet(gsm, msg);
+		switch (ret) {
+		case -ENOSPC:
+			return -ENOSPC;
+		case -ENODEV:
+			/* ldisc not open */
+			gsm->tx_bytes -= msg->len;
+			list_del(&msg->list);
+			kfree(msg);
+			continue;
+		default:
+			if (ret >= 0) {
+				list_del(&msg->list);
+				kfree(msg);
+			}
 			break;
-		/* FIXME: Can eliminate one SOF in many more cases */
-		gsm->tx_bytes -= msg->len;
-
-		list_del(&msg->list);
-		kfree(msg);
-
-		if (dlci) {
-			tty_port_tty_wakeup(&dlci->port);
-		} else {
-			int i = 0;
-
-			for (i = 0; i < NUM_DLCI; i++)
-				if (gsm->dlci[i])
-					tty_port_tty_wakeup(&gsm->dlci[i]->port);
 		}
 	}
+
+	if (gsm->constipated)
+		return -EAGAIN;
+
+	/* Serialize other channels */
+	if (list_empty(&gsm->tx_data_list))
+		return 0;
+	list_for_each_entry_safe(msg, nmsg, &gsm->tx_data_list, list) {
+		dlci = gsm->dlci[msg->addr];
+		/* Send only messages for DLCIs with valid state */
+		if (dlci->state != DLCI_OPEN) {
+			gsm->tx_bytes -= msg->len;
+			list_del(&msg->list);
+			kfree(msg);
+			continue;
+		}
+		ret = gsm_send_packet(gsm, msg);
+		switch (ret) {
+		case -ENOSPC:
+			return -ENOSPC;
+		case -ENODEV:
+			/* ldisc not open */
+			gsm->tx_bytes -= msg->len;
+			list_del(&msg->list);
+			kfree(msg);
+			continue;
+		default:
+			if (ret >= 0) {
+				list_del(&msg->list);
+				kfree(msg);
+			}
+			break;
+		}
+	}
+
+	return 1;
 }
 
 /**
@@ -784,9 +994,22 @@ static void __gsm_data_queue(struct gsm_dlci *dlci, struct gsm_msg *msg)
 	msg->data = dp;
 
 	/* Add to the actual output queue */
-	list_add_tail(&msg->list, &gsm->tx_list);
+	switch (msg->ctrl & ~PF) {
+	case UI:
+	case UIH:
+		if (msg->addr > 0) {
+			list_add_tail(&msg->list, &gsm->tx_data_list);
+			break;
+		}
+		fallthrough;
+	default:
+		list_add_tail(&msg->list, &gsm->tx_ctrl_list);
+		break;
+	}
 	gsm->tx_bytes += msg->len;
-	gsm_data_kick(gsm, dlci);
+
+	gsmld_write_trigger(gsm);
+	mod_timer(&gsm->kick_timer, jiffies + 10 * gsm->t1 * HZ / 100);
 }
 
 /**
@@ -823,41 +1046,48 @@ static int gsm_dlci_data_output(struct gsm_mux *gsm, struct gsm_dlci *dlci)
 {
 	struct gsm_msg *msg;
 	u8 *dp;
-	int len, total_size, size;
-	int h = dlci->adaption - 1;
+	int h, len, size;
 
-	total_size = 0;
-	while (1) {
-		len = kfifo_len(&dlci->fifo);
-		if (len == 0)
-			return total_size;
+	/* for modem bits without break data */
+	h = ((dlci->adaption == 1) ? 0 : 1);
 
-		/* MTU/MRU count only the data bits */
-		if (len > gsm->mtu)
-			len = gsm->mtu;
+	len = kfifo_len(&dlci->fifo);
+	if (len == 0)
+		return 0;
 
-		size = len + h;
+	/* MTU/MRU count only the data bits but watch adaption mode */
+	if ((len + h) > gsm->mtu)
+		len = gsm->mtu - h;
 
-		msg = gsm_data_alloc(gsm, dlci->addr, size, gsm->ftype);
-		/* FIXME: need a timer or something to kick this so it can't
-		   get stuck with no work outstanding and no buffer free */
-		if (msg == NULL)
-			return -ENOMEM;
-		dp = msg->data;
-		switch (dlci->adaption) {
-		case 1:	/* Unstructured */
-			break;
-		case 2:	/* Unstructed with modem bits.
-		Always one byte as we never send inline break data */
-			*dp++ = (gsm_encode_modem(dlci) << 1) | EA;
-			break;
-		}
-		WARN_ON(kfifo_out_locked(&dlci->fifo, dp , len, &dlci->lock) != len);
-		__gsm_data_queue(dlci, msg);
-		total_size += size;
+	size = len + h;
+
+	msg = gsm_data_alloc(gsm, dlci->addr, size, gsm->ftype);
+	if (!msg)
+		return -ENOMEM;
+	dp = msg->data;
+	switch (dlci->adaption) {
+	case 1: /* Unstructured */
+		break;
+	case 2: /* Unstructured with modem bits.
+		 * Always one byte as we never send inline break data
+		 */
+		*dp++ = (gsm_encode_modem(dlci) << 1) | EA;
+		break;
+	default:
+		pr_err("%s: unsupported adaption %d\n", __func__,
+		       dlci->adaption);
+		break;
 	}
+
+	WARN_ON(len != kfifo_out_locked(&dlci->fifo, dp, len,
+		&dlci->lock));
+
+	/* Notify upper layer about available send space. */
+	tty_port_tty_wakeup(&dlci->port);
+
+	__gsm_data_queue(dlci, msg);
 	/* Bytes of data we used up */
-	return total_size;
+	return size;
 }
 
 /**
@@ -908,9 +1138,6 @@ static int gsm_dlci_data_output_framed(struct gsm_mux *gsm,
 
 	size = len + overhead;
 	msg = gsm_data_alloc(gsm, dlci->addr, size, gsm->ftype);
-
-	/* FIXME: need a timer or something to kick this so it can't
-	   get stuck with no work outstanding and no buffer free */
 	if (msg == NULL) {
 		skb_queue_tail(&dlci->skb_list, dlci->skb);
 		dlci->skb = NULL;
@@ -1006,32 +1233,43 @@ static int gsm_dlci_modem_output(struct gsm_mux *gsm, struct gsm_dlci *dlci,
  *	renegotiate DLCI priorities with optional stuff. Needs optimising.
  */
 
-static void gsm_dlci_data_sweep(struct gsm_mux *gsm)
+static int gsm_dlci_data_sweep(struct gsm_mux *gsm)
 {
-	int len;
 	/* Priority ordering: We should do priority with RR of the groups */
-	int i = 1;
+	int i, len, ret = 0;
+	bool sent;
+	struct gsm_dlci *dlci;
 
-	while (i < NUM_DLCI) {
-		struct gsm_dlci *dlci;
-
-		if (gsm->tx_bytes > TX_THRESH_HI)
-			break;
-		dlci = gsm->dlci[i];
-		if (dlci == NULL || dlci->constipated) {
-			i++;
-			continue;
+	while (gsm->tx_bytes < TX_THRESH_HI) {
+		for (sent = false, i = 1; i < NUM_DLCI; i++) {
+			dlci = gsm->dlci[i];
+			/* skip unused or blocked channel */
+			if (!dlci || dlci->constipated)
+				continue;
+			/* skip channels with invalid state */
+			if (dlci->state != DLCI_OPEN)
+				continue;
+			/* count the sent data per adaption */
+			if (dlci->adaption < 3 && !dlci->net)
+				len = gsm_dlci_data_output(gsm, dlci);
+			else
+				len = gsm_dlci_data_output_framed(gsm, dlci);
+			/* on error exit */
+			if (len < 0)
+				return ret;
+			if (len > 0) {
+				ret++;
+				sent = true;
+				/* The lower DLCs can starve the higher DLCs! */
+				break;
+			}
+			/* try next */
 		}
-		if (dlci->adaption < 3 && !dlci->net)
-			len = gsm_dlci_data_output(gsm, dlci);
-		else
-			len = gsm_dlci_data_output_framed(gsm, dlci);
-		if (len < 0)
+		if (!sent)
 			break;
-		/* DLCI empty - try the next */
-		if (len == 0)
-			i++;
-	}
+	};
+
+	return ret;
 }
 
 /**
@@ -1277,7 +1515,6 @@ static void gsm_control_message(struct gsm_mux *gsm, unsigned int command,
 						const u8 *data, int clen)
 {
 	u8 buf[1];
-	unsigned long flags;
 
 	switch (command) {
 	case CMD_CLD: {
@@ -1299,9 +1536,7 @@ static void gsm_control_message(struct gsm_mux *gsm, unsigned int command,
 		gsm->constipated = false;
 		gsm_control_reply(gsm, CMD_FCON, NULL, 0);
 		/* Kick the link in case it is idling */
-		spin_lock_irqsave(&gsm->tx_lock, flags);
-		gsm_data_kick(gsm, NULL);
-		spin_unlock_irqrestore(&gsm->tx_lock, flags);
+		gsmld_write_trigger(gsm);
 		break;
 	case CMD_FCOFF:
 		/* Modem wants us to STFU */
@@ -1407,7 +1642,7 @@ static void gsm_control_retransmit(struct timer_list *t)
 	spin_lock_irqsave(&gsm->control_lock, flags);
 	ctrl = gsm->pending_cmd;
 	if (ctrl) {
-		if (gsm->cretries == 0) {
+		if (gsm->cretries == 0 || !gsm->dlci[0] || gsm->dlci[0]->dead) {
 			gsm->pending_cmd = NULL;
 			ctrl->error = -ETIMEDOUT;
 			ctrl->done = 1;
@@ -1504,25 +1739,24 @@ static int gsm_control_wait(struct gsm_mux *gsm, struct gsm_control *control)
 
 static void gsm_dlci_close(struct gsm_dlci *dlci)
 {
-	unsigned long flags;
-
 	del_timer(&dlci->t1);
 	if (debug & 8)
 		pr_debug("DLCI %d goes closed.\n", dlci->addr);
 	dlci->state = DLCI_CLOSED;
+	/* Prevent us from sending data before the link is up again */
+	dlci->constipated = true;
 	if (dlci->addr != 0) {
 		tty_port_tty_hangup(&dlci->port, false);
-		spin_lock_irqsave(&dlci->lock, flags);
-		kfifo_reset(&dlci->fifo);
-		spin_unlock_irqrestore(&dlci->lock, flags);
+		gsm_dlci_clear_queues(dlci->gsm, dlci);
 		/* Ensure that gsmtty_open() can return. */
 		tty_port_set_initialized(&dlci->port, 0);
 		wake_up_interruptible(&dlci->port.open_wait);
 	} else
 		dlci->gsm->dead = true;
-	wake_up(&dlci->gsm->event);
 	/* A DLCI 0 close is a MUX termination so we need to kick that
 	   back to userspace somehow */
+	gsm_dlci_data_kick(dlci);
+	wake_up(&dlci->gsm->event);
 }
 
 /**
@@ -1539,11 +1773,13 @@ static void gsm_dlci_open(struct gsm_dlci *dlci)
 	del_timer(&dlci->t1);
 	/* This will let a tty open continue */
 	dlci->state = DLCI_OPEN;
+	dlci->constipated = false;
 	if (debug & 8)
 		pr_debug("DLCI %d goes open.\n", dlci->addr);
 	/* Send current modem state */
 	if (dlci->addr)
 		gsm_modem_update(dlci, 0);
+	gsm_dlci_data_kick(dlci);
 	wake_up(&dlci->gsm->event);
 }
 
@@ -1569,8 +1805,8 @@ static void gsm_dlci_t1(struct timer_list *t)
 
 	switch (dlci->state) {
 	case DLCI_OPENING:
-		dlci->retries--;
 		if (dlci->retries) {
+			dlci->retries--;
 			gsm_command(dlci->gsm, dlci->addr, SABM|PF);
 			mod_timer(&dlci->t1, jiffies + gsm->t1 * HZ / 100);
 		} else if (!dlci->addr && gsm->control == (DM | PF)) {
@@ -1585,8 +1821,8 @@ static void gsm_dlci_t1(struct timer_list *t)
 
 		break;
 	case DLCI_CLOSING:
-		dlci->retries--;
 		if (dlci->retries) {
+			dlci->retries--;
 			gsm_command(dlci->gsm, dlci->addr, DISC|PF);
 			mod_timer(&dlci->t1, jiffies + gsm->t1 * HZ / 100);
 		} else
@@ -1620,6 +1856,25 @@ static void gsm_dlci_begin_open(struct gsm_dlci *dlci)
 }
 
 /**
+ *	gsm_dlci_set_opening	-	change state to opening
+ *	@dlci: DLCI to open
+ *
+ *	Change internal state to wait for DLCI open from initiator side.
+ *	We set off timers and responses upon reception of an SABM.
+ */
+static void gsm_dlci_set_opening(struct gsm_dlci *dlci)
+{
+	switch (dlci->state) {
+	case DLCI_CLOSED:
+	case DLCI_CLOSING:
+		dlci->state = DLCI_OPENING;
+		break;
+	default:
+		break;
+	}
+}
+
+/**
  *	gsm_dlci_begin_close	-	start channel open procedure
  *	@dlci: DLCI to open
  *
@@ -1728,6 +1983,30 @@ static void gsm_dlci_command(struct gsm_dlci *dlci, const u8 *data, int len)
 	}
 }
 
+/**
+ *	gsm_kick_timer	-	transmit if possible
+ *	@t: timer contained in our gsm object
+ *
+ *	Transmit data from DLCIs if the queue is empty. We can't rely on
+ *	a tty wakeup except when we filled the pipe so we need to fire off
+ *	new data ourselves in other cases.
+ */
+static void gsm_kick_timer(struct timer_list *t)
+{
+	struct gsm_mux *gsm = from_timer(gsm, t, kick_timer);
+	unsigned long flags;
+	int sent = 0;
+
+	spin_lock_irqsave(&gsm->tx_lock, flags);
+	/* If we have nothing running then we need to fire up */
+	if (gsm->tx_bytes < TX_THRESH_LO)
+		sent = gsm_dlci_data_sweep(gsm);
+	spin_unlock_irqrestore(&gsm->tx_lock, flags);
+
+	if (sent && debug & 4)
+		pr_info("%s TX queue stalled\n", __func__);
+}
+
 /*
  *	Allocate/Free DLCI channels
  */
@@ -1762,10 +2041,13 @@ static struct gsm_dlci *gsm_dlci_alloc(struct gsm_mux *gsm, int addr)
 	dlci->addr = addr;
 	dlci->adaption = gsm->adaption;
 	dlci->state = DLCI_CLOSED;
-	if (addr)
+	if (addr) {
 		dlci->data = gsm_dlci_data;
-	else
+		/* Prevent us from sending data before the link is up */
+		dlci->constipated = true;
+	} else {
 		dlci->data = gsm_dlci_command;
+	}
 	gsm->dlci[addr] = dlci;
 	return dlci;
 }
@@ -1925,7 +2207,7 @@ static void gsm_queue(struct gsm_mux *gsm)
 	case UIH:
 	case UIH|PF:
 		if (dlci == NULL || dlci->state != DLCI_OPEN) {
-			gsm_command(gsm, address, DM|PF);
+			gsm_response(gsm, address, DM|PF);
 			return;
 		}
 		dlci->data(dlci, gsm->buf, gsm->len);
@@ -2048,7 +2330,7 @@ static void gsm1_receive(struct gsm_mux *gsm, unsigned char c)
 	} else if ((c & ISO_IEC_646_MASK) == XOFF) {
 		gsm->constipated = false;
 		/* Kick the link in case it is idling */
-		gsm_data_kick(gsm, NULL);
+		gsmld_write_trigger(gsm);
 		return;
 	}
 	if (c == GSM1_SOF) {
@@ -2176,18 +2458,29 @@ static void gsm_cleanup_mux(struct gsm_mux *gsm, bool disc)
 	}
 
 	/* Finish outstanding timers, making sure they are done */
+	del_timer_sync(&gsm->kick_timer);
 	del_timer_sync(&gsm->t2_timer);
 
+	/* Finish writing to ldisc */
+	flush_work(&gsm->tx_work);
+
 	/* Free up any link layer users and finally the control channel */
+	if (gsm->has_devices) {
+		gsm_unregister_devices(gsm_tty_driver, gsm->num);
+		gsm->has_devices = false;
+	}
 	for (i = NUM_DLCI - 1; i >= 0; i--)
 		if (gsm->dlci[i])
 			gsm_dlci_release(gsm->dlci[i]);
 	mutex_unlock(&gsm->mutex);
 	/* Now wipe the queues */
 	tty_ldisc_flush(gsm->tty);
-	list_for_each_entry_safe(txq, ntxq, &gsm->tx_list, list)
+	list_for_each_entry_safe(txq, ntxq, &gsm->tx_ctrl_list, list)
 		kfree(txq);
-	INIT_LIST_HEAD(&gsm->tx_list);
+	INIT_LIST_HEAD(&gsm->tx_ctrl_list);
+	list_for_each_entry_safe(txq, ntxq, &gsm->tx_data_list, list)
+		kfree(txq);
+	INIT_LIST_HEAD(&gsm->tx_data_list);
 }
 
 /**
@@ -2202,8 +2495,15 @@ static void gsm_cleanup_mux(struct gsm_mux *gsm, bool disc)
 static int gsm_activate_mux(struct gsm_mux *gsm)
 {
 	struct gsm_dlci *dlci;
+	int ret;
 
+	dlci = gsm_dlci_alloc(gsm, 0);
+	if (dlci == NULL)
+		return -ENOMEM;
+
+	timer_setup(&gsm->kick_timer, gsm_kick_timer, 0);
 	timer_setup(&gsm->t2_timer, gsm_control_retransmit, 0);
+	INIT_WORK(&gsm->tx_work, gsmld_write_task);
 	init_waitqueue_head(&gsm->event);
 	spin_lock_init(&gsm->control_lock);
 	spin_lock_init(&gsm->tx_lock);
@@ -2213,9 +2513,11 @@ static int gsm_activate_mux(struct gsm_mux *gsm)
 	else
 		gsm->receive = gsm1_receive;
 
-	dlci = gsm_dlci_alloc(gsm, 0);
-	if (dlci == NULL)
-		return -ENOMEM;
+	ret = gsm_register_devices(gsm_tty_driver, gsm->num);
+	if (ret)
+		return ret;
+
+	gsm->has_devices = true;
 	gsm->dead = false;		/* Tty opens are now permissible */
 	return 0;
 }
@@ -2308,7 +2610,8 @@ static struct gsm_mux *gsm_alloc_mux(void)
 	spin_lock_init(&gsm->lock);
 	mutex_init(&gsm->mutex);
 	kref_init(&gsm->ref);
-	INIT_LIST_HEAD(&gsm->tx_list);
+	INIT_LIST_HEAD(&gsm->tx_ctrl_list);
+	INIT_LIST_HEAD(&gsm->tx_data_list);
 
 	gsm->t1 = T1;
 	gsm->t2 = T2;
@@ -2465,6 +2768,47 @@ static int gsmld_output(struct gsm_mux *gsm, u8 *data, int len)
 	return gsm->tty->ops->write(gsm->tty, data, len);
 }
 
+
+/**
+ *	gsmld_write_trigger	-	schedule ldisc write task
+ *	@gsm: our mux
+ */
+static void gsmld_write_trigger(struct gsm_mux *gsm)
+{
+	if (!gsm || !gsm->dlci[0] || gsm->dlci[0]->dead)
+		return;
+	schedule_work(&gsm->tx_work);
+}
+
+
+/**
+ *	gsmld_write_task	-	ldisc write task
+ *	@work: our tx write work
+ *
+ *	Writes out data to the ldisc if possible. We are doing this here to
+ *	avoid dead-locking. This returns if no space or data is left for output.
+ */
+static void gsmld_write_task(struct work_struct *work)
+{
+	struct gsm_mux *gsm = container_of(work, struct gsm_mux, tx_work);
+	unsigned long flags;
+	int i, ret;
+
+	/* All outstanding control channel and control messages and one data
+	 * frame is sent.
+	 */
+	ret = -ENODEV;
+	spin_lock_irqsave(&gsm->tx_lock, flags);
+	if (gsm->tty)
+		ret = gsm_data_kick(gsm);
+	spin_unlock_irqrestore(&gsm->tx_lock, flags);
+
+	if (ret >= 0)
+		for (i = 0; i < NUM_DLCI; i++)
+			if (gsm->dlci[i])
+				tty_port_tty_wakeup(&gsm->dlci[i]->port);
+}
+
 /**
  *	gsmld_attach_gsm	-	mode set up
  *	@tty: our tty structure
@@ -2475,39 +2819,14 @@ static int gsmld_output(struct gsm_mux *gsm, u8 *data, int len)
  *	will need moving to an ioctl path.
  */
 
-static int gsmld_attach_gsm(struct tty_struct *tty, struct gsm_mux *gsm)
+static void gsmld_attach_gsm(struct tty_struct *tty, struct gsm_mux *gsm)
 {
-	unsigned int base;
-	int ret, i;
-
 	gsm->tty = tty_kref_get(tty);
 	/* Turn off tty XON/XOFF handling to handle it explicitly. */
 	gsm->old_c_iflag = tty->termios.c_iflag;
 	tty->termios.c_iflag &= (IXON | IXOFF);
-	ret =  gsm_activate_mux(gsm);
-	if (ret != 0)
-		tty_kref_put(gsm->tty);
-	else {
-		/* Don't register device 0 - this is the control channel and not
-		   a usable tty interface */
-		base = mux_num_to_base(gsm); /* Base for this MUX */
-		for (i = 1; i < NUM_DLCI; i++) {
-			struct device *dev;
-
-			dev = tty_register_device(gsm_tty_driver,
-							base + i, NULL);
-			if (IS_ERR(dev)) {
-				for (i--; i >= 1; i--)
-					tty_unregister_device(gsm_tty_driver,
-								base + i);
-				return PTR_ERR(dev);
-			}
-		}
-	}
-	return ret;
 }
 
-
 /**
  *	gsmld_detach_gsm	-	stop doing 0710 mux
  *	@tty: tty attached to the mux
@@ -2518,12 +2837,7 @@ static int gsmld_attach_gsm(struct tty_struct *tty, struct gsm_mux *gsm)
 
 static void gsmld_detach_gsm(struct tty_struct *tty, struct gsm_mux *gsm)
 {
-	unsigned int base = mux_num_to_base(gsm); /* Base for this MUX */
-	int i;
-
 	WARN_ON(tty != gsm->tty);
-	for (i = 1; i < NUM_DLCI; i++)
-		tty_unregister_device(gsm_tty_driver, base + i);
 	/* Restore tty XON/XOFF handling. */
 	gsm->tty->termios.c_iflag = gsm->old_c_iflag;
 	tty_kref_put(gsm->tty);
@@ -2615,7 +2929,6 @@ static void gsmld_close(struct tty_struct *tty)
 static int gsmld_open(struct tty_struct *tty)
 {
 	struct gsm_mux *gsm;
-	int ret;
 
 	if (tty->ops->write == NULL)
 		return -EINVAL;
@@ -2631,12 +2944,13 @@ static int gsmld_open(struct tty_struct *tty)
 	/* Attach the initial passive connection */
 	gsm->encoding = 1;
 
-	ret = gsmld_attach_gsm(tty, gsm);
-	if (ret != 0) {
-		gsm_cleanup_mux(gsm, false);
-		mux_put(gsm);
-	}
-	return ret;
+	gsmld_attach_gsm(tty, gsm);
+
+	timer_setup(&gsm->kick_timer, gsm_kick_timer, 0);
+	timer_setup(&gsm->t2_timer, gsm_control_retransmit, 0);
+	INIT_WORK(&gsm->tx_work, gsmld_write_task);
+
+	return 0;
 }
 
 /**
@@ -2651,16 +2965,9 @@ static int gsmld_open(struct tty_struct *tty)
 static void gsmld_write_wakeup(struct tty_struct *tty)
 {
 	struct gsm_mux *gsm = tty->disc_data;
-	unsigned long flags;
 
 	/* Queue poll */
-	clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
-	spin_lock_irqsave(&gsm->tx_lock, flags);
-	gsm_data_kick(gsm, NULL);
-	if (gsm->tx_bytes < TX_THRESH_LO) {
-		gsm_dlci_data_sweep(gsm);
-	}
-	spin_unlock_irqrestore(&gsm->tx_lock, flags);
+	gsmld_write_trigger(gsm);
 }
 
 /**
@@ -2704,11 +3011,24 @@ static ssize_t gsmld_read(struct tty_struct *tty, struct file *file,
 static ssize_t gsmld_write(struct tty_struct *tty, struct file *file,
 			   const unsigned char *buf, size_t nr)
 {
-	int space = tty_write_room(tty);
+	struct gsm_mux *gsm = tty->disc_data;
+	unsigned long flags;
+	int space;
+	int ret;
+
+	if (!gsm)
+		return -ENODEV;
+
+	ret = -ENOBUFS;
+	spin_lock_irqsave(&gsm->tx_lock, flags);
+	space = tty_write_room(tty);
 	if (space >= nr)
-		return tty->ops->write(tty, buf, nr);
-	set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
-	return -ENOBUFS;
+		ret = tty->ops->write(tty, buf, nr);
+	else
+		set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
+	spin_unlock_irqrestore(&gsm->tx_lock, flags);
+
+	return ret;
 }
 
 /**
@@ -2733,12 +3053,15 @@ static __poll_t gsmld_poll(struct tty_struct *tty, struct file *file,
 
 	poll_wait(file, &tty->read_wait, wait);
 	poll_wait(file, &tty->write_wait, wait);
+
+	if (gsm->dead)
+		mask |= EPOLLHUP;
 	if (tty_hung_up_p(file))
 		mask |= EPOLLHUP;
+	if (test_bit(TTY_OTHER_CLOSED, &tty->flags))
+		mask |= EPOLLHUP;
 	if (!tty_is_writelocked(tty) && tty_write_room(tty) > 0)
 		mask |= EPOLLOUT | EPOLLWRNORM;
-	if (gsm->dead)
-		mask |= EPOLLHUP;
 	return mask;
 }
 
@@ -3174,6 +3497,8 @@ static int gsmtty_open(struct tty_struct *tty, struct file *filp)
 	/* Start sending off SABM messages */
 	if (gsm->initiator)
 		gsm_dlci_begin_open(dlci);
+	else
+		gsm_dlci_set_opening(dlci);
 	/* And wait for virtual carrier */
 	return tty_port_block_til_ready(port, tty, filp);
 }
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 640c9e8..3afdd90 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -118,6 +118,9 @@ struct n_tty_data {
 	size_t read_tail;
 	size_t line_start;
 
+	/* # of chars looked ahead (to find software flow control chars) */
+	size_t lookahead_count;
+
 	/* protected by output lock */
 	unsigned int column;
 	unsigned int canon_column;
@@ -333,6 +336,8 @@ static void reset_buffer_flags(struct n_tty_data *ldata)
 	ldata->erasing = 0;
 	bitmap_zero(ldata->read_flags, N_TTY_BUF_SIZE);
 	ldata->push = 0;
+
+	ldata->lookahead_count = 0;
 }
 
 static void n_tty_packet_mode_flush(struct tty_struct *tty)
@@ -1225,12 +1230,30 @@ static bool n_tty_is_char_flow_ctrl(struct tty_struct *tty, unsigned char c)
 	return c == START_CHAR(tty) || c == STOP_CHAR(tty);
 }
 
-/* Returns true if c is consumed as flow-control character */
-static bool n_tty_receive_char_flow_ctrl(struct tty_struct *tty, unsigned char c)
+/**
+ * n_tty_receive_char_flow_ctrl - receive flow control chars
+ * @tty: terminal device
+ * @c: character
+ * @lookahead_done: lookahead has processed this character already
+ *
+ * Receive and process flow control character actions.
+ *
+ * In case lookahead for flow control chars already handled the character in
+ * advance to the normal receive, the actions are skipped during normal
+ * receive.
+ *
+ * Returns true if @c is consumed as flow-control character, the character
+ * must not be treated as normal character.
+ */
+static bool n_tty_receive_char_flow_ctrl(struct tty_struct *tty, unsigned char c,
+					 bool lookahead_done)
 {
 	if (!n_tty_is_char_flow_ctrl(tty, c))
 		return false;
 
+	if (lookahead_done)
+		return true;
+
 	if (c == START_CHAR(tty)) {
 		start_tty(tty);
 		process_echoes(tty);
@@ -1242,11 +1265,12 @@ static bool n_tty_receive_char_flow_ctrl(struct tty_struct *tty, unsigned char c
 	return true;
 }
 
-static void n_tty_receive_char_special(struct tty_struct *tty, unsigned char c)
+static void n_tty_receive_char_special(struct tty_struct *tty, unsigned char c,
+				       bool lookahead_done)
 {
 	struct n_tty_data *ldata = tty->disc_data;
 
-	if (I_IXON(tty) && n_tty_receive_char_flow_ctrl(tty, c))
+	if (I_IXON(tty) && n_tty_receive_char_flow_ctrl(tty, c, lookahead_done))
 		return;
 
 	if (L_ISIG(tty)) {
@@ -1401,7 +1425,8 @@ static void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
 	put_tty_queue(c, ldata);
 }
 
-static void n_tty_receive_char_closing(struct tty_struct *tty, unsigned char c)
+static void n_tty_receive_char_closing(struct tty_struct *tty, unsigned char c,
+				       bool lookahead_done)
 {
 	if (I_ISTRIP(tty))
 		c &= 0x7f;
@@ -1409,12 +1434,10 @@ static void n_tty_receive_char_closing(struct tty_struct *tty, unsigned char c)
 		c = tolower(c);
 
 	if (I_IXON(tty)) {
-		if (c == STOP_CHAR(tty))
-			stop_tty(tty);
-		else if (c == START_CHAR(tty) ||
-			 (tty->flow.stopped && !tty->flow.tco_stopped && I_IXANY(tty) &&
-			  c != INTR_CHAR(tty) && c != QUIT_CHAR(tty) &&
-			  c != SUSP_CHAR(tty))) {
+		if (!n_tty_receive_char_flow_ctrl(tty, c, lookahead_done) &&
+		    tty->flow.stopped && !tty->flow.tco_stopped && I_IXANY(tty) &&
+		    c != INTR_CHAR(tty) && c != QUIT_CHAR(tty) &&
+		    c != SUSP_CHAR(tty)) {
 			start_tty(tty);
 			process_echoes(tty);
 		}
@@ -1457,6 +1480,27 @@ n_tty_receive_char_lnext(struct tty_struct *tty, unsigned char c, char flag)
 		n_tty_receive_char_flagged(tty, c, flag);
 }
 
+/* Caller must ensure count > 0 */
+static void n_tty_lookahead_flow_ctrl(struct tty_struct *tty, const unsigned char *cp,
+				      const unsigned char *fp, unsigned int count)
+{
+	struct n_tty_data *ldata = tty->disc_data;
+	unsigned char flag = TTY_NORMAL;
+
+	ldata->lookahead_count += count;
+
+	if (!I_IXON(tty))
+		return;
+
+	while (count--) {
+		if (fp)
+			flag = *fp++;
+		if (likely(flag == TTY_NORMAL))
+			n_tty_receive_char_flow_ctrl(tty, *cp, false);
+		cp++;
+	}
+}
+
 static void
 n_tty_receive_buf_real_raw(struct tty_struct *tty, const unsigned char *cp,
 			   const char *fp, int count)
@@ -1496,7 +1540,7 @@ n_tty_receive_buf_raw(struct tty_struct *tty, const unsigned char *cp,
 
 static void
 n_tty_receive_buf_closing(struct tty_struct *tty, const unsigned char *cp,
-			  const char *fp, int count)
+			  const char *fp, int count, bool lookahead_done)
 {
 	char flag = TTY_NORMAL;
 
@@ -1504,12 +1548,12 @@ n_tty_receive_buf_closing(struct tty_struct *tty, const unsigned char *cp,
 		if (fp)
 			flag = *fp++;
 		if (likely(flag == TTY_NORMAL))
-			n_tty_receive_char_closing(tty, *cp++);
+			n_tty_receive_char_closing(tty, *cp++, lookahead_done);
 	}
 }
 
 static void n_tty_receive_buf_standard(struct tty_struct *tty,
-		const unsigned char *cp, const char *fp, int count)
+		const unsigned char *cp, const char *fp, int count, bool lookahead_done)
 {
 	struct n_tty_data *ldata = tty->disc_data;
 	char flag = TTY_NORMAL;
@@ -1540,7 +1584,7 @@ static void n_tty_receive_buf_standard(struct tty_struct *tty,
 		}
 
 		if (test_bit(c, ldata->char_map))
-			n_tty_receive_char_special(tty, c);
+			n_tty_receive_char_special(tty, c, lookahead_done);
 		else
 			n_tty_receive_char(tty, c);
 	}
@@ -1551,21 +1595,30 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
 {
 	struct n_tty_data *ldata = tty->disc_data;
 	bool preops = I_ISTRIP(tty) || (I_IUCLC(tty) && L_IEXTEN(tty));
+	size_t la_count = min_t(size_t, ldata->lookahead_count, count);
 
 	if (ldata->real_raw)
 		n_tty_receive_buf_real_raw(tty, cp, fp, count);
 	else if (ldata->raw || (L_EXTPROC(tty) && !preops))
 		n_tty_receive_buf_raw(tty, cp, fp, count);
-	else if (tty->closing && !L_EXTPROC(tty))
-		n_tty_receive_buf_closing(tty, cp, fp, count);
-	else {
-		n_tty_receive_buf_standard(tty, cp, fp, count);
+	else if (tty->closing && !L_EXTPROC(tty)) {
+		if (la_count > 0)
+			n_tty_receive_buf_closing(tty, cp, fp, la_count, true);
+		if (count > la_count)
+			n_tty_receive_buf_closing(tty, cp, fp, count - la_count, false);
+	} else {
+		if (la_count > 0)
+			n_tty_receive_buf_standard(tty, cp, fp, la_count, true);
+		if (count > la_count)
+			n_tty_receive_buf_standard(tty, cp, fp, count - la_count, false);
 
 		flush_echoes(tty);
 		if (tty->ops->flush_chars)
 			tty->ops->flush_chars(tty);
 	}
 
+	ldata->lookahead_count -= la_count;
+
 	if (ldata->icanon && !L_EXTPROC(tty))
 		return;
 
@@ -2446,6 +2499,7 @@ static struct tty_ldisc_ops n_tty_ops = {
 	.receive_buf     = n_tty_receive_buf,
 	.write_wakeup    = n_tty_write_wakeup,
 	.receive_buf2	 = n_tty_receive_buf2,
+	.lookahead_buf	 = n_tty_lookahead_flow_ctrl,
 };
 
 /**
diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h
index 696030c..287153d 100644
--- a/drivers/tty/serial/8250/8250.h
+++ b/drivers/tty/serial/8250/8250.h
@@ -123,6 +123,26 @@ static inline void serial_out(struct uart_8250_port *up, int offset, int value)
 	up->port.serial_out(&up->port, offset, value);
 }
 
+/**
+ *	serial_lsr_in - Read LSR register and preserve flags across reads
+ *	@up:	uart 8250 port
+ *
+ *	Read LSR register and handle saving non-preserved flags across reads.
+ *	The flags that are not preserved across reads are stored into
+ *	up->lsr_saved_flags.
+ *
+ *	Returns LSR value or'ed with the preserved flags (if any).
+ */
+static inline u16 serial_lsr_in(struct uart_8250_port *up)
+{
+	u16 lsr = up->lsr_saved_flags;
+
+	lsr |= serial_in(up, UART_LSR);
+	up->lsr_saved_flags = lsr & up->lsr_save_mask;
+
+	return lsr;
+}
+
 /*
  * For the 16C950
  */
@@ -183,10 +203,12 @@ void serial8250_rpm_put(struct uart_8250_port *p);
 void serial8250_rpm_get_tx(struct uart_8250_port *p);
 void serial8250_rpm_put_tx(struct uart_8250_port *p);
 
-int serial8250_em485_config(struct uart_port *port, struct serial_rs485 *rs485);
+int serial8250_em485_config(struct uart_port *port, struct ktermios *termios,
+			    struct serial_rs485 *rs485);
 void serial8250_em485_start_tx(struct uart_8250_port *p);
 void serial8250_em485_stop_tx(struct uart_8250_port *p);
 void serial8250_em485_destroy(struct uart_8250_port *p);
+extern struct serial_rs485 serial8250_em485_supported;
 
 /* MCR <-> TIOCM conversion */
 static inline int serial8250_TIOCM_to_MCR(int tiocm)
diff --git a/drivers/tty/serial/8250/8250_bcm2835aux.c b/drivers/tty/serial/8250/8250_bcm2835aux.c
index 2a1226a..15a2387 100644
--- a/drivers/tty/serial/8250/8250_bcm2835aux.c
+++ b/drivers/tty/serial/8250/8250_bcm2835aux.c
@@ -108,6 +108,7 @@ static int bcm2835aux_serial_probe(struct platform_device *pdev)
 	up.port.flags = UPF_SHARE_IRQ | UPF_FIXED_PORT | UPF_FIXED_TYPE |
 			UPF_SKIP_TEST | UPF_IOREMAP;
 	up.port.rs485_config = serial8250_em485_config;
+	up.port.rs485_supported = serial8250_em485_supported;
 	up.rs485_start_tx = bcm2835aux_rs485_start_tx;
 	up.rs485_stop_tx = bcm2835aux_rs485_stop_tx;
 
@@ -166,8 +167,10 @@ static int bcm2835aux_serial_probe(struct platform_device *pdev)
 	uartclk = clk_get_rate(data->clk);
 	if (!uartclk) {
 		ret = device_property_read_u32(&pdev->dev, "clock-frequency", &uartclk);
-		if (ret)
-			return dev_err_probe(&pdev->dev, ret, "could not get clk rate\n");
+		if (ret) {
+			dev_err_probe(&pdev->dev, ret, "could not get clk rate\n");
+			goto dis_clk;
+		}
 	}
 
 	/* the HW-clock divider for bcm2835aux is 8,
diff --git a/drivers/tty/serial/8250/8250_bcm7271.c b/drivers/tty/serial/8250/8250_bcm7271.c
index 9b878d0..8efdc27 100644
--- a/drivers/tty/serial/8250/8250_bcm7271.c
+++ b/drivers/tty/serial/8250/8250_bcm7271.c
@@ -1139,16 +1139,19 @@ static int __maybe_unused brcmuart_suspend(struct device *dev)
 	struct brcmuart_priv *priv = dev_get_drvdata(dev);
 	struct uart_8250_port *up = serial8250_get_port(priv->line);
 	struct uart_port *port = &up->port;
-
-	serial8250_suspend_port(priv->line);
-	clk_disable_unprepare(priv->baud_mux_clk);
+	unsigned long flags;
 
 	/*
 	 * This will prevent resume from enabling RTS before the
-	 *  baud rate has been resored.
+	 *  baud rate has been restored.
 	 */
+	spin_lock_irqsave(&port->lock, flags);
 	priv->saved_mctrl = port->mctrl;
-	port->mctrl = 0;
+	port->mctrl &= ~TIOCM_RTS;
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	serial8250_suspend_port(priv->line);
+	clk_disable_unprepare(priv->baud_mux_clk);
 
 	return 0;
 }
@@ -1158,6 +1161,7 @@ static int __maybe_unused brcmuart_resume(struct device *dev)
 	struct brcmuart_priv *priv = dev_get_drvdata(dev);
 	struct uart_8250_port *up = serial8250_get_port(priv->line);
 	struct uart_port *port = &up->port;
+	unsigned long flags;
 	int ret;
 
 	ret = clk_prepare_enable(priv->baud_mux_clk);
@@ -1180,7 +1184,15 @@ static int __maybe_unused brcmuart_resume(struct device *dev)
 		start_rx_dma(serial8250_get_port(priv->line));
 	}
 	serial8250_resume_port(priv->line);
-	port->mctrl = priv->saved_mctrl;
+
+	if (priv->saved_mctrl & TIOCM_RTS) {
+		/* Restore RTS */
+		spin_lock_irqsave(&port->lock, flags);
+		port->mctrl |= TIOCM_RTS;
+		port->ops->set_mctrl(port, port->mctrl);
+		spin_unlock_irqrestore(&port->lock, flags);
+	}
+
 	return 0;
 }
 
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index 3f56dbc..2e83e73 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -277,8 +277,7 @@ static void serial8250_backup_timeout(struct timer_list *t)
 	 * the "Diva" UART used on the management processor on many HP
 	 * ia64 and parisc boxes.
 	 */
-	lsr = serial_in(up, UART_LSR);
-	up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS;
+	lsr = serial_lsr_in(up);
 	if ((iir & UART_IIR_NO_INT) && (up->ier & UART_IER_THRI) &&
 	    (!uart_circ_empty(&up->port.state->xmit) || up->port.x_char) &&
 	    (lsr & UART_LSR_THRE)) {
@@ -1008,9 +1007,11 @@ int serial8250_register_8250_port(const struct uart_8250_port *up)
 		uart->port.throttle	= up->port.throttle;
 		uart->port.unthrottle	= up->port.unthrottle;
 		uart->port.rs485_config	= up->port.rs485_config;
+		uart->port.rs485_supported = up->port.rs485_supported;
 		uart->port.rs485	= up->port.rs485;
 		uart->rs485_start_tx	= up->rs485_start_tx;
 		uart->rs485_stop_tx	= up->rs485_stop_tx;
+		uart->lsr_save_mask	= up->lsr_save_mask;
 		uart->dma		= up->dma;
 
 		/* Take tx_loadsz from fifosize if it wasn't set separately */
@@ -1098,6 +1099,9 @@ int serial8250_register_8250_port(const struct uart_8250_port *up)
 			ret = 0;
 		}
 
+		if (!uart->lsr_save_mask)
+			uart->lsr_save_mask = LSR_SAVE_FLAGS;	/* Use default LSR mask */
+
 		/* Initialise interrupt backoff work if required */
 		if (up->overrun_backoff_time_ms > 0) {
 			uart->overrun_backoff_time_ms =
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index bb6aca0..a604b42 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -9,26 +9,27 @@
  * LCR is written whilst busy.  If it is, then a busy detect interrupt is
  * raised, the LCR needs to be rewritten and the uart status register read.
  */
+#include <linux/acpi.h>
+#include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/io.h>
 #include <linux/mod_devicetable.h>
 #include <linux/module.h>
-#include <linux/serial_8250.h>
-#include <linux/serial_reg.h>
+#include <linux/notifier.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
-#include <linux/property.h>
-#include <linux/workqueue.h>
-#include <linux/notifier.h>
-#include <linux/slab.h>
-#include <linux/acpi.h>
-#include <linux/clk.h>
-#include <linux/reset.h>
 #include <linux/pm_runtime.h>
+#include <linux/property.h>
+#include <linux/reset.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
 
 #include <asm/byteorder.h>
 
+#include <linux/serial_8250.h>
+#include <linux/serial_reg.h>
+
 #include "8250_dwlib.h"
 
 /* Offsets for the DesignWare specific registers */
@@ -82,8 +83,21 @@ static inline int dw8250_modify_msr(struct uart_port *p, int offset, int value)
 static void dw8250_force_idle(struct uart_port *p)
 {
 	struct uart_8250_port *up = up_to_u8250p(p);
+	unsigned int lsr;
 
 	serial8250_clear_and_reinit_fifos(up);
+
+	/*
+	 * With PSLVERR_RESP_EN parameter set to 1, the device generates an
+	 * error response when an attempt to read an empty RBR with FIFO
+	 * enabled.
+	 */
+	if (up->fcr & UART_FCR_ENABLE_FIFO) {
+		lsr = p->serial_in(p, UART_LSR);
+		if (!(lsr & UART_LSR_DR))
+			return;
+	}
+
 	(void)p->serial_in(p, UART_RX);
 }
 
@@ -122,12 +136,15 @@ static void dw8250_check_lcr(struct uart_port *p, int value)
 /* Returns once the transmitter is empty or we run out of retries */
 static void dw8250_tx_wait_empty(struct uart_port *p)
 {
+	struct uart_8250_port *up = up_to_u8250p(p);
 	unsigned int tries = 20000;
 	unsigned int delay_threshold = tries - 1000;
 	unsigned int lsr;
 
 	while (tries--) {
 		lsr = readb (p->membase + (UART_LSR << p->regshift));
+		up->lsr_saved_flags |= lsr & up->lsr_save_mask;
+
 		if (lsr & UART_LSR_TEMT)
 			break;
 
@@ -140,21 +157,6 @@ static void dw8250_tx_wait_empty(struct uart_port *p)
 	}
 }
 
-static void dw8250_serial_out38x(struct uart_port *p, int offset, int value)
-{
-	struct dw8250_data *d = to_dw8250_data(p->private_data);
-
-	/* Allow the TX to drain before we reconfigure */
-	if (offset == UART_LCR)
-		dw8250_tx_wait_empty(p);
-
-	writeb(value, p->membase + (offset << p->regshift));
-
-	if (offset == UART_LCR && !d->uart_16550_compatible)
-		dw8250_check_lcr(p, value);
-}
-
-
 static void dw8250_serial_out(struct uart_port *p, int offset, int value)
 {
 	struct dw8250_data *d = to_dw8250_data(p->private_data);
@@ -165,6 +167,15 @@ static void dw8250_serial_out(struct uart_port *p, int offset, int value)
 		dw8250_check_lcr(p, value);
 }
 
+static void dw8250_serial_out38x(struct uart_port *p, int offset, int value)
+{
+	/* Allow the TX to drain before we reconfigure */
+	if (offset == UART_LCR)
+		dw8250_tx_wait_empty(p);
+
+	dw8250_serial_out(p, offset, value);
+}
+
 static unsigned int dw8250_serial_in(struct uart_port *p, int offset)
 {
 	unsigned int value = readb(p->membase + (offset << p->regshift));
@@ -253,7 +264,7 @@ static int dw8250_handle_irq(struct uart_port *p)
 	 */
 	if (!up->dma && rx_timeout) {
 		spin_lock_irqsave(&p->lock, flags);
-		status = p->serial_in(p, UART_LSR);
+		status = serial_lsr_in(up);
 
 		if (!(status & (UART_LSR_DR | UART_LSR_BI)))
 			(void) p->serial_in(p, UART_RX);
@@ -263,7 +274,10 @@ static int dw8250_handle_irq(struct uart_port *p)
 
 	/* Manually stop the Rx DMA transfer when acting as flow controller */
 	if (quirks & DW_UART_QUIRK_IS_DMA_FC && up->dma && up->dma->rx_running && rx_timeout) {
-		status = p->serial_in(p, UART_LSR);
+		spin_lock_irqsave(&p->lock, flags);
+		status = serial_lsr_in(up);
+		spin_unlock_irqrestore(&p->lock, flags);
+
 		if (status & (UART_LSR_DR | UART_LSR_BI)) {
 			dw8250_writel_ext(p, RZN1_UART_RDMACR, 0);
 			dw8250_writel_ext(p, DW_UART_DMASA, 1);
@@ -688,7 +702,6 @@ static int dw8250_remove(struct platform_device *pdev)
 	return 0;
 }
 
-#ifdef CONFIG_PM_SLEEP
 static int dw8250_suspend(struct device *dev)
 {
 	struct dw8250_data *data = dev_get_drvdata(dev);
@@ -706,9 +719,7 @@ static int dw8250_resume(struct device *dev)
 
 	return 0;
 }
-#endif /* CONFIG_PM_SLEEP */
 
-#ifdef CONFIG_PM
 static int dw8250_runtime_suspend(struct device *dev)
 {
 	struct dw8250_data *data = dev_get_drvdata(dev);
@@ -730,11 +741,10 @@ static int dw8250_runtime_resume(struct device *dev)
 
 	return 0;
 }
-#endif
 
 static const struct dev_pm_ops dw8250_pm_ops = {
-	SET_SYSTEM_SLEEP_PM_OPS(dw8250_suspend, dw8250_resume)
-	SET_RUNTIME_PM_OPS(dw8250_runtime_suspend, dw8250_runtime_resume, NULL)
+	SYSTEM_SLEEP_PM_OPS(dw8250_suspend, dw8250_resume)
+	RUNTIME_PM_OPS(dw8250_runtime_suspend, dw8250_runtime_resume, NULL)
 };
 
 static const struct dw8250_platform_data dw8250_dw_apb = {
@@ -792,7 +802,7 @@ MODULE_DEVICE_TABLE(acpi, dw8250_acpi_match);
 static struct platform_driver dw8250_platform_driver = {
 	.driver = {
 		.name		= "dw-apb-uart",
-		.pm		= &dw8250_pm_ops,
+		.pm		= pm_ptr(&dw8250_pm_ops),
 		.of_match_table	= dw8250_of_match,
 		.acpi_match_table = dw8250_acpi_match,
 	},
diff --git a/drivers/tty/serial/8250/8250_dwlib.c b/drivers/tty/serial/8250/8250_dwlib.c
index fbabfdd..dbe4d44 100644
--- a/drivers/tty/serial/8250/8250_dwlib.c
+++ b/drivers/tty/serial/8250/8250_dwlib.c
@@ -3,8 +3,10 @@
 
 #include <linux/bitops.h>
 #include <linux/bitfield.h>
+#include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/kernel.h>
+#include <linux/math.h>
 #include <linux/property.h>
 #include <linux/serial_8250.h>
 #include <linux/serial_core.h>
@@ -16,9 +18,18 @@
 #define DW_UART_DE_EN	0xb0 /* Driver Output Enable Register */
 #define DW_UART_RE_EN	0xb4 /* Receiver Output Enable Register */
 #define DW_UART_DLF	0xc0 /* Divisor Latch Fraction Register */
+#define DW_UART_RAR	0xc4 /* Receive Address Register */
+#define DW_UART_TAR	0xc8 /* Transmit Address Register */
+#define DW_UART_LCR_EXT	0xcc /* Line Extended Control Register */
 #define DW_UART_CPR	0xf4 /* Component Parameter Register */
 #define DW_UART_UCV	0xf8 /* UART Component Version */
 
+/* Receive / Transmit Address Register bits */
+#define DW_UART_ADDR_MASK		GENMASK(7, 0)
+
+/* Line Status Register bits */
+#define DW_UART_LSR_ADDR_RCVD		BIT(8)
+
 /* Transceiver Control Register bits */
 #define DW_UART_TCR_RS485_EN		BIT(0)
 #define DW_UART_TCR_RE_POL		BIT(1)
@@ -28,22 +39,28 @@
 #define DW_UART_TCR_XFER_MODE_SW_DE_OR_RE	FIELD_PREP(DW_UART_TCR_XFER_MODE, 1)
 #define DW_UART_TCR_XFER_MODE_DE_OR_RE		FIELD_PREP(DW_UART_TCR_XFER_MODE, 2)
 
+/* Line Extended Control Register bits */
+#define DW_UART_LCR_EXT_DLS_E		BIT(0)
+#define DW_UART_LCR_EXT_ADDR_MATCH	BIT(1)
+#define DW_UART_LCR_EXT_SEND_ADDR	BIT(2)
+#define DW_UART_LCR_EXT_TRANSMIT_MODE	BIT(3)
+
 /* Component Parameter Register bits */
-#define DW_UART_CPR_ABP_DATA_WIDTH	(3 << 0)
-#define DW_UART_CPR_AFCE_MODE		(1 << 4)
-#define DW_UART_CPR_THRE_MODE		(1 << 5)
-#define DW_UART_CPR_SIR_MODE		(1 << 6)
-#define DW_UART_CPR_SIR_LP_MODE		(1 << 7)
-#define DW_UART_CPR_ADDITIONAL_FEATURES	(1 << 8)
-#define DW_UART_CPR_FIFO_ACCESS		(1 << 9)
-#define DW_UART_CPR_FIFO_STAT		(1 << 10)
-#define DW_UART_CPR_SHADOW		(1 << 11)
-#define DW_UART_CPR_ENCODED_PARMS	(1 << 12)
-#define DW_UART_CPR_DMA_EXTRA		(1 << 13)
-#define DW_UART_CPR_FIFO_MODE		(0xff << 16)
+#define DW_UART_CPR_ABP_DATA_WIDTH	GENMASK(1, 0)
+#define DW_UART_CPR_AFCE_MODE		BIT(4)
+#define DW_UART_CPR_THRE_MODE		BIT(5)
+#define DW_UART_CPR_SIR_MODE		BIT(6)
+#define DW_UART_CPR_SIR_LP_MODE		BIT(7)
+#define DW_UART_CPR_ADDITIONAL_FEATURES	BIT(8)
+#define DW_UART_CPR_FIFO_ACCESS		BIT(9)
+#define DW_UART_CPR_FIFO_STAT		BIT(10)
+#define DW_UART_CPR_SHADOW		BIT(11)
+#define DW_UART_CPR_ENCODED_PARMS	BIT(12)
+#define DW_UART_CPR_DMA_EXTRA		BIT(13)
+#define DW_UART_CPR_FIFO_MODE		GENMASK(23, 16)
 
 /* Helper for FIFO size calculation */
-#define DW_UART_CPR_FIFO_SIZE(a)	(((a >> 16) & 0xff) * 16)
+#define DW_UART_CPR_FIFO_SIZE(a)	(FIELD_GET(DW_UART_CPR_FIFO_MODE, (a)) * 16)
 
 /*
  * divisor = div(I) + div(F)
@@ -82,10 +99,85 @@ void dw8250_do_set_termios(struct uart_port *p, struct ktermios *termios, struct
 		p->status |= UPSTAT_AUTOCTS;
 
 	serial8250_do_set_termios(p, termios, old);
+
+	/* Filter addresses which have 9th bit set */
+	p->ignore_status_mask |= DW_UART_LSR_ADDR_RCVD;
+	p->read_status_mask |= DW_UART_LSR_ADDR_RCVD;
 }
 EXPORT_SYMBOL_GPL(dw8250_do_set_termios);
 
-static int dw8250_rs485_config(struct uart_port *p, struct serial_rs485 *rs485)
+/*
+ * Wait until re is de-asserted for sure. An ongoing receive will keep
+ * re asserted until end of frame. Without BUSY indication available,
+ * only available course of action is to wait for the time it takes to
+ * receive one frame (there might nothing to receive but w/o BUSY the
+ * driver cannot know).
+ */
+static void dw8250_wait_re_deassert(struct uart_port *p)
+{
+	ndelay(p->frame_time);
+}
+
+static void dw8250_update_rar(struct uart_port *p, u32 addr)
+{
+	u32 re_en = dw8250_readl_ext(p, DW_UART_RE_EN);
+
+	/*
+	 * RAR shouldn't be changed while receiving. Thus, de-assert RE_EN
+	 * if asserted and wait.
+	 */
+	if (re_en)
+		dw8250_writel_ext(p, DW_UART_RE_EN, 0);
+	dw8250_wait_re_deassert(p);
+	dw8250_writel_ext(p, DW_UART_RAR, addr);
+	if (re_en)
+		dw8250_writel_ext(p, DW_UART_RE_EN, re_en);
+}
+
+static void dw8250_rs485_set_addr(struct uart_port *p, struct serial_rs485 *rs485,
+				  struct ktermios *termios)
+{
+	u32 lcr = dw8250_readl_ext(p, DW_UART_LCR_EXT);
+
+	if (rs485->flags & SER_RS485_ADDRB) {
+		lcr |= DW_UART_LCR_EXT_DLS_E;
+		if (termios)
+			termios->c_cflag |= ADDRB;
+
+		if (rs485->flags & SER_RS485_ADDR_RECV) {
+			u32 delta = p->rs485.flags ^ rs485->flags;
+
+			/*
+			 * rs485 (param) is equal to uart_port's rs485 only during init
+			 * (during init, delta is not yet applicable).
+			 */
+			if (unlikely(&p->rs485 == rs485))
+				delta = rs485->flags;
+
+			if ((delta & SER_RS485_ADDR_RECV) ||
+			    (p->rs485.addr_recv != rs485->addr_recv))
+				dw8250_update_rar(p, rs485->addr_recv);
+			lcr |= DW_UART_LCR_EXT_ADDR_MATCH;
+		} else {
+			lcr &= ~DW_UART_LCR_EXT_ADDR_MATCH;
+		}
+		if (rs485->flags & SER_RS485_ADDR_DEST) {
+			/*
+			 * Don't skip writes here as another endpoint could
+			 * have changed communication line's destination
+			 * address in between.
+			 */
+			dw8250_writel_ext(p, DW_UART_TAR, rs485->addr_dest);
+			lcr |= DW_UART_LCR_EXT_SEND_ADDR;
+		}
+	} else {
+		lcr = 0;
+	}
+	dw8250_writel_ext(p, DW_UART_LCR_EXT, lcr);
+}
+
+static int dw8250_rs485_config(struct uart_port *p, struct ktermios *termios,
+			       struct serial_rs485 *rs485)
 {
 	u32 tcr;
 
@@ -93,25 +185,17 @@ static int dw8250_rs485_config(struct uart_port *p, struct serial_rs485 *rs485)
 	tcr &= ~DW_UART_TCR_XFER_MODE;
 
 	if (rs485->flags & SER_RS485_ENABLED) {
-		/* Clear unsupported flags. */
-		rs485->flags &= SER_RS485_ENABLED | SER_RS485_RX_DURING_TX |
-				SER_RS485_RTS_ON_SEND | SER_RS485_RTS_AFTER_SEND;
 		tcr |= DW_UART_TCR_RS485_EN;
 
-		if (rs485->flags & SER_RS485_RX_DURING_TX) {
+		if (rs485->flags & SER_RS485_RX_DURING_TX)
 			tcr |= DW_UART_TCR_XFER_MODE_DE_DURING_RE;
-		} else {
-			/* HW does not support same DE level for tx and rx */
-			if (!(rs485->flags & SER_RS485_RTS_ON_SEND) ==
-			    !(rs485->flags & SER_RS485_RTS_AFTER_SEND))
-				return -EINVAL;
-
+		else
 			tcr |= DW_UART_TCR_XFER_MODE_DE_OR_RE;
-		}
 		dw8250_writel_ext(p, DW_UART_DE_EN, 1);
 		dw8250_writel_ext(p, DW_UART_RE_EN, 1);
 	} else {
-		rs485->flags = 0;
+		if (termios)
+			termios->c_cflag &= ~ADDRB;
 
 		tcr &= ~DW_UART_TCR_RS485_EN;
 	}
@@ -127,10 +211,9 @@ static int dw8250_rs485_config(struct uart_port *p, struct serial_rs485 *rs485)
 
 	dw8250_writel_ext(p, DW_UART_TCR, tcr);
 
-	rs485->delay_rts_before_send = 0;
-	rs485->delay_rts_after_send = 0;
-
-	p->rs485 = *rs485;
+	/* Addressing mode can only be set up after TCR */
+	if (rs485->flags & SER_RS485_ENABLED)
+		dw8250_rs485_set_addr(p, rs485, termios);
 
 	return 0;
 }
@@ -149,6 +232,12 @@ static bool dw8250_detect_rs485_hw(struct uart_port *p)
 	return reg;
 }
 
+static const struct serial_rs485 dw8250_rs485_supported = {
+	.flags = SER_RS485_ENABLED | SER_RS485_RX_DURING_TX | SER_RS485_RTS_ON_SEND |
+		 SER_RS485_RTS_AFTER_SEND | SER_RS485_ADDRB | SER_RS485_ADDR_RECV |
+		 SER_RS485_ADDR_DEST,
+};
+
 void dw8250_setup_port(struct uart_port *p)
 {
 	struct dw8250_port_data *pd = p->private_data;
@@ -159,8 +248,11 @@ void dw8250_setup_port(struct uart_port *p)
 	pd->hw_rs485_support = dw8250_detect_rs485_hw(p);
 	if (pd->hw_rs485_support) {
 		p->rs485_config = dw8250_rs485_config;
+		up->lsr_save_mask = LSR_SAVE_FLAGS | DW_UART_LSR_ADDR_RCVD;
+		p->rs485_supported = dw8250_rs485_supported;
 	} else {
 		p->rs485_config = serial8250_em485_config;
+		p->rs485_supported = serial8250_em485_supported;
 		up->rs485_start_tx = serial8250_em485_start_tx;
 		up->rs485_stop_tx = serial8250_em485_stop_tx;
 	}
diff --git a/drivers/tty/serial/8250/8250_early.c b/drivers/tty/serial/8250/8250_early.c
index e525850..f271bec 100644
--- a/drivers/tty/serial/8250/8250_early.c
+++ b/drivers/tty/serial/8250/8250_early.c
@@ -84,8 +84,6 @@ static void serial8250_early_out(struct uart_port *port, int offset, int value)
 	}
 }
 
-#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
-
 static void serial_putc(struct uart_port *port, unsigned char c)
 {
 	unsigned int status;
@@ -94,7 +92,7 @@ static void serial_putc(struct uart_port *port, unsigned char c)
 
 	for (;;) {
 		status = serial8250_early_in(port, UART_LSR);
-		if ((status & BOTH_EMPTY) == BOTH_EMPTY)
+		if (uart_lsr_tx_empty(status))
 			break;
 		cpu_relax();
 	}
diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
index 7292917..314a05e 100644
--- a/drivers/tty/serial/8250/8250_exar.c
+++ b/drivers/tty/serial/8250/8250_exar.c
@@ -112,7 +112,9 @@
 struct exar8250;
 
 struct exar8250_platform {
-	int (*rs485_config)(struct uart_port *, struct serial_rs485 *);
+	int (*rs485_config)(struct uart_port *port, struct ktermios *termios,
+			    struct serial_rs485 *rs485);
+	const struct serial_rs485 *rs485_supported;
 	int (*register_gpio)(struct pci_dev *, struct uart_8250_port *);
 	void (*unregister_gpio)(struct uart_8250_port *);
 };
@@ -194,11 +196,11 @@ static int xr17v35x_startup(struct uart_port *port)
 
 static void exar_shutdown(struct uart_port *port)
 {
-	unsigned char lsr;
 	bool tx_complete = false;
 	struct uart_8250_port *up = up_to_u8250p(port);
 	struct circ_buf *xmit = &port->state->xmit;
 	int i = 0;
+	u16 lsr;
 
 	do {
 		lsr = serial_in(up, UART_LSR);
@@ -408,7 +410,7 @@ static void xr17v35x_unregister_gpio(struct uart_8250_port *port)
 	port->port.private_data = NULL;
 }
 
-static int generic_rs485_config(struct uart_port *port,
+static int generic_rs485_config(struct uart_port *port, struct ktermios *termios,
 				struct serial_rs485 *rs485)
 {
 	bool is_rs485 = !!(rs485->flags & SER_RS485_ENABLED);
@@ -426,18 +428,21 @@ static int generic_rs485_config(struct uart_port *port,
 	if (is_rs485)
 		writeb(UART_EXAR_RS485_DLY(4), p + UART_MSR);
 
-	port->rs485 = *rs485;
-
 	return 0;
 }
 
+static const struct serial_rs485 generic_rs485_supported = {
+	.flags = SER_RS485_ENABLED,
+};
+
 static const struct exar8250_platform exar8250_default_platform = {
 	.register_gpio = xr17v35x_register_gpio,
 	.unregister_gpio = xr17v35x_unregister_gpio,
 	.rs485_config = generic_rs485_config,
+	.rs485_supported = &generic_rs485_supported,
 };
 
-static int iot2040_rs485_config(struct uart_port *port,
+static int iot2040_rs485_config(struct uart_port *port, struct ktermios *termios,
 				struct serial_rs485 *rs485)
 {
 	bool is_rs485 = !!(rs485->flags & SER_RS485_ENABLED);
@@ -467,9 +472,13 @@ static int iot2040_rs485_config(struct uart_port *port,
 	value |= mode;
 	writeb(value, p + UART_EXAR_MPIOLVL_7_0);
 
-	return generic_rs485_config(port, rs485);
+	return generic_rs485_config(port, termios, rs485);
 }
 
+static const struct serial_rs485 iot2040_rs485_supported = {
+	.flags = SER_RS485_ENABLED | SER_RS485_RX_DURING_TX | SER_RS485_TERMINATE_BUS,
+};
+
 static const struct property_entry iot2040_gpio_properties[] = {
 	PROPERTY_ENTRY_U32("exar,first-pin", 10),
 	PROPERTY_ENTRY_U32("ngpios", 1),
@@ -498,6 +507,7 @@ static int iot2040_register_gpio(struct pci_dev *pcidev,
 
 static const struct exar8250_platform iot2040_platform = {
 	.rs485_config = iot2040_rs485_config,
+	.rs485_supported = &iot2040_rs485_supported,
 	.register_gpio = iot2040_register_gpio,
 	.unregister_gpio = xr17v35x_unregister_gpio,
 };
@@ -540,6 +550,7 @@ pci_xr17v35x_setup(struct exar8250 *priv, struct pci_dev *pcidev,
 
 	port->port.uartclk = baud * 16;
 	port->port.rs485_config = platform->rs485_config;
+	port->port.rs485_supported = *(platform->rs485_supported);
 
 	/*
 	 * Setup the UART clock for the devices on expansion slot to
diff --git a/drivers/tty/serial/8250/8250_fintek.c b/drivers/tty/serial/8250/8250_fintek.c
index dba5950..65b6b3c 100644
--- a/drivers/tty/serial/8250/8250_fintek.c
+++ b/drivers/tty/serial/8250/8250_fintek.c
@@ -191,7 +191,7 @@ static int fintek_8250_get_ldn_range(struct fintek_8250 *pdata, int *min,
 	return -ENODEV;
 }
 
-static int fintek_8250_rs485_config(struct uart_port *port,
+static int fintek_8250_rs485_config(struct uart_port *port, struct ktermios *termios,
 			      struct serial_rs485 *rs485)
 {
 	uint8_t config = 0;
@@ -206,19 +206,7 @@ static int fintek_8250_rs485_config(struct uart_port *port,
 		if (!(rs485->flags & SER_RS485_RTS_ON_SEND) ==
 		    !(rs485->flags & SER_RS485_RTS_AFTER_SEND))
 			return -EINVAL;
-		memset(rs485->padding, 0, sizeof(rs485->padding));
 		config |= RS485_URA;
-	} else {
-		memset(rs485, 0, sizeof(*rs485));
-	}
-
-	rs485->flags &= SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND |
-			SER_RS485_RTS_AFTER_SEND;
-
-	/* Only the first port supports delays */
-	if (pdata->index) {
-		rs485->delay_rts_before_send = 0;
-		rs485->delay_rts_after_send = 0;
 	}
 
 	if (rs485->delay_rts_before_send) {
@@ -241,8 +229,6 @@ static int fintek_8250_rs485_config(struct uart_port *port,
 	sio_write_reg(pdata, RS485, config);
 	fintek_8250_exit_key(pdata->base_port);
 
-	port->rs485 = *rs485;
-
 	return 0;
 }
 
@@ -424,6 +410,17 @@ static int probe_setup_port(struct fintek_8250 *pdata,
 	return -ENODEV;
 }
 
+/* Only the first port supports delays */
+static const struct serial_rs485 fintek_8250_rs485_supported_port0 = {
+	.flags = SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND | SER_RS485_RTS_AFTER_SEND,
+	.delay_rts_before_send = 1,
+	.delay_rts_after_send = 1,
+};
+
+static const struct serial_rs485 fintek_8250_rs485_supported = {
+	.flags = SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND | SER_RS485_RTS_AFTER_SEND,
+};
+
 static void fintek_8250_set_rs485_handler(struct uart_8250_port *uart)
 {
 	struct fintek_8250 *pdata = uart->port.private_data;
@@ -435,6 +432,10 @@ static void fintek_8250_set_rs485_handler(struct uart_8250_port *uart)
 	case CHIP_ID_F81866:
 	case CHIP_ID_F81865:
 		uart->port.rs485_config = fintek_8250_rs485_config;
+		if (!pdata->index)
+			uart->port.rs485_supported = fintek_8250_rs485_supported_port0;
+		else
+			uart->port.rs485_supported = fintek_8250_rs485_supported;
 		break;
 
 	default: /* No RS485 Auto direction functional */
diff --git a/drivers/tty/serial/8250/8250_fsl.c b/drivers/tty/serial/8250/8250_fsl.c
index 9c01c53..8aad156 100644
--- a/drivers/tty/serial/8250/8250_fsl.c
+++ b/drivers/tty/serial/8250/8250_fsl.c
@@ -25,8 +25,8 @@
 
 int fsl8250_handle_irq(struct uart_port *port)
 {
-	unsigned char lsr, orig_lsr;
 	unsigned long flags;
+	u16 lsr, orig_lsr;
 	unsigned int iir;
 	struct uart_8250_port *up = up_to_u8250p(port);
 
@@ -77,7 +77,7 @@ int fsl8250_handle_irq(struct uart_port *port)
 	if ((lsr & UART_LSR_THRE) && (up->ier & UART_IER_THRI))
 		serial8250_tx_chars(up);
 
-	up->lsr_saved_flags = orig_lsr;
+	up->lsr_saved_flags |= orig_lsr & UART_LSR_BI;
 
 	uart_unlock_and_check_sysrq_irqrestore(&up->port, flags);
 
diff --git a/drivers/tty/serial/8250/8250_ingenic.c b/drivers/tty/serial/8250/8250_ingenic.c
index cff91aa..2b2f5d8 100644
--- a/drivers/tty/serial/8250/8250_ingenic.c
+++ b/drivers/tty/serial/8250/8250_ingenic.c
@@ -54,7 +54,7 @@ static void early_out(struct uart_port *port, int offset, uint8_t value)
 
 static void ingenic_early_console_putc(struct uart_port *port, unsigned char c)
 {
-	uint8_t lsr;
+	u16 lsr;
 
 	do {
 		lsr = early_in(port, UART_LSR);
diff --git a/drivers/tty/serial/8250/8250_lpc18xx.c b/drivers/tty/serial/8250/8250_lpc18xx.c
index 570e25d..6dc85aa 100644
--- a/drivers/tty/serial/8250/8250_lpc18xx.c
+++ b/drivers/tty/serial/8250/8250_lpc18xx.c
@@ -32,7 +32,7 @@ struct lpc18xx_uart_data {
 	int line;
 };
 
-static int lpc18xx_rs485_config(struct uart_port *port,
+static int lpc18xx_rs485_config(struct uart_port *port, struct ktermios *termios,
 				struct serial_rs485 *rs485)
 {
 	struct uart_8250_port *up = up_to_u8250p(port);
@@ -40,24 +40,12 @@ static int lpc18xx_rs485_config(struct uart_port *port,
 	u32 rs485_dly_reg = 0;
 	unsigned baud_clk;
 
-	if (rs485->flags & SER_RS485_ENABLED)
-		memset(rs485->padding, 0, sizeof(rs485->padding));
-	else
-		memset(rs485, 0, sizeof(*rs485));
-
-	rs485->flags &= SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND |
-			SER_RS485_RTS_AFTER_SEND;
-
 	if (rs485->flags & SER_RS485_ENABLED) {
 		rs485_ctrl_reg |= LPC18XX_UART_RS485CTRL_NMMEN |
 				  LPC18XX_UART_RS485CTRL_DCTRL;
 
-		if (rs485->flags & SER_RS485_RTS_ON_SEND) {
+		if (rs485->flags & SER_RS485_RTS_ON_SEND)
 			rs485_ctrl_reg |= LPC18XX_UART_RS485CTRL_OINV;
-			rs485->flags &= ~SER_RS485_RTS_AFTER_SEND;
-		} else {
-			rs485->flags |= SER_RS485_RTS_AFTER_SEND;
-		}
 	}
 
 	if (rs485->delay_rts_after_send) {
@@ -73,14 +61,9 @@ static int lpc18xx_rs485_config(struct uart_port *port,
 						/ baud_clk;
 	}
 
-	/* Delay RTS before send not supported */
-	rs485->delay_rts_before_send = 0;
-
 	serial_out(up, LPC18XX_UART_RS485CTRL, rs485_ctrl_reg);
 	serial_out(up, LPC18XX_UART_RS485DLY, rs485_dly_reg);
 
-	port->rs485 = *rs485;
-
 	return 0;
 }
 
@@ -98,6 +81,12 @@ static void lpc18xx_uart_serial_out(struct uart_port *p, int offset, int value)
 	writel(value, p->membase + offset);
 }
 
+static const struct serial_rs485 lpc18xx_rs485_supported = {
+	.flags = SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND | SER_RS485_RTS_AFTER_SEND,
+	.delay_rts_after_send = 1,
+	/* Delay RTS before send is not supported */
+};
+
 static int lpc18xx_serial_probe(struct platform_device *pdev)
 {
 	struct lpc18xx_uart_data *data;
@@ -168,6 +157,7 @@ static int lpc18xx_serial_probe(struct platform_device *pdev)
 	uart.port.uartclk = clk_get_rate(data->clk_uart);
 	uart.port.private_data = data;
 	uart.port.rs485_config = lpc18xx_rs485_config;
+	uart.port.rs485_supported = lpc18xx_rs485_supported;
 	uart.port.serial_out = lpc18xx_uart_serial_out;
 
 	uart.dma = &data->dma;
diff --git a/drivers/tty/serial/8250/8250_lpss.c b/drivers/tty/serial/8250/8250_lpss.c
index 0f5af06..4ba43be 100644
--- a/drivers/tty/serial/8250/8250_lpss.c
+++ b/drivers/tty/serial/8250/8250_lpss.c
@@ -330,7 +330,7 @@ static int lpss8250_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	uart.port.irq = pci_irq_vector(pdev, 0);
 	uart.port.private_data = &lpss->data;
 	uart.port.type = PORT_16550A;
-	uart.port.iotype = UPIO_MEM;
+	uart.port.iotype = UPIO_MEM32;
 	uart.port.regshift = 2;
 	uart.port.uartclk = lpss->board->base_baud * 16;
 	uart.port.flags = UPF_SHARE_IRQ | UPF_FIXED_PORT | UPF_FIXED_TYPE;
diff --git a/drivers/tty/serial/8250/8250_of.c b/drivers/tty/serial/8250/8250_of.c
index 5a699a1..1b461fb 100644
--- a/drivers/tty/serial/8250/8250_of.c
+++ b/drivers/tty/serial/8250/8250_of.c
@@ -165,6 +165,7 @@ static int of_platform_serial_setup(struct platform_device *ofdev,
 
 	port->dev = &ofdev->dev;
 	port->rs485_config = serial8250_em485_config;
+	port->rs485_supported = serial8250_em485_supported;
 	up->rs485_start_tx = serial8250_em485_start_tx;
 	up->rs485_stop_tx = serial8250_em485_stop_tx;
 
diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c
index ac8bfa0..0dcecbb 100644
--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -1115,8 +1115,7 @@ static bool handle_rx_dma(struct uart_8250_port *up, unsigned int iir)
 	return omap_8250_rx_dma(up);
 }
 
-static unsigned char omap_8250_handle_rx_dma(struct uart_8250_port *up,
-					     u8 iir, unsigned char status)
+static u16 omap_8250_handle_rx_dma(struct uart_8250_port *up, u8 iir, u16 status)
 {
 	if ((status & (UART_LSR_DR | UART_LSR_BI)) &&
 	    (iir & UART_IIR_RDI)) {
@@ -1130,7 +1129,7 @@ static unsigned char omap_8250_handle_rx_dma(struct uart_8250_port *up,
 }
 
 static void am654_8250_handle_rx_dma(struct uart_8250_port *up, u8 iir,
-				     unsigned char status)
+				     u16 status)
 {
 	/*
 	 * Queue a new transfer if FIFO has data.
@@ -1164,7 +1163,7 @@ static int omap_8250_dma_handle_irq(struct uart_port *port)
 {
 	struct uart_8250_port *up = up_to_u8250p(port);
 	struct omap8250_priv *priv = up->port.private_data;
-	unsigned char status;
+	u16 status;
 	u8 iir;
 
 	serial8250_rpm_get(up);
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index a17619d..6f66dc2 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1553,7 +1553,7 @@ pci_brcm_trumanage_setup(struct serial_private *priv,
 #define FINTEK_RTS_INVERT		BIT(5)
 
 /* We should do proper H/W transceiver setting before change to RS485 mode */
-static int pci_fintek_rs485_config(struct uart_port *port,
+static int pci_fintek_rs485_config(struct uart_port *port, struct ktermios *termios,
 			       struct serial_rs485 *rs485)
 {
 	struct pci_dev *pci_dev = to_pci_dev(port->dev);
@@ -1562,16 +1562,6 @@ static int pci_fintek_rs485_config(struct uart_port *port,
 
 	pci_read_config_byte(pci_dev, 0x40 + 8 * *index + 7, &setting);
 
-	if (!rs485)
-		rs485 = &port->rs485;
-	else if (rs485->flags & SER_RS485_ENABLED)
-		memset(rs485->padding, 0, sizeof(rs485->padding));
-	else
-		memset(rs485, 0, sizeof(*rs485));
-
-	/* F81504/508/512 not support RTS delay before or after send */
-	rs485->flags &= SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND;
-
 	if (rs485->flags & SER_RS485_ENABLED) {
 		/* Enable RTS H/W control mode */
 		setting |= FINTEK_RTS_CONTROL_BY_HW;
@@ -1583,9 +1573,6 @@ static int pci_fintek_rs485_config(struct uart_port *port,
 			/* RTS driving low on TX */
 			setting |= FINTEK_RTS_INVERT;
 		}
-
-		rs485->delay_rts_after_send = 0;
-		rs485->delay_rts_before_send = 0;
 	} else {
 		/* Disable RTS H/W control mode */
 		setting &= ~(FINTEK_RTS_CONTROL_BY_HW | FINTEK_RTS_INVERT);
@@ -1593,12 +1580,14 @@ static int pci_fintek_rs485_config(struct uart_port *port,
 
 	pci_write_config_byte(pci_dev, 0x40 + 8 * *index + 7, setting);
 
-	if (rs485 != &port->rs485)
-		port->rs485 = *rs485;
-
 	return 0;
 }
 
+static const struct serial_rs485 pci_fintek_rs485_supported = {
+	.flags = SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND,
+	/* F81504/508/512 does not support RTS delay before or after send */
+};
+
 static int pci_fintek_setup(struct serial_private *priv,
 			    const struct pciserial_board *board,
 			    struct uart_8250_port *port, int idx)
@@ -1618,6 +1607,7 @@ static int pci_fintek_setup(struct serial_private *priv,
 	port->port.iotype = UPIO_PORT;
 	port->port.iobase = iobase;
 	port->port.rs485_config = pci_fintek_rs485_config;
+	port->port.rs485_supported = pci_fintek_rs485_supported;
 
 	data = devm_kzalloc(&pdev->dev, sizeof(u8), GFP_KERNEL);
 	if (!data)
@@ -1689,7 +1679,7 @@ static int pci_fintek_init(struct pci_dev *dev)
 			 * pciserial_resume_ports()
 			 */
 			port = serial8250_get_port(priv->line[i]);
-			pci_fintek_rs485_config(&port->port, NULL);
+			uart_rs485_config(&port->port);
 		} else {
 			/* First init without port data
 			 * force init to RS232 Mode
@@ -5077,6 +5067,115 @@ static const struct pci_device_id serial_pci_tbl[] = {
 		0, 0,
 		pbn_b2_4_115200 },
 	/*
+	 * Brainboxes PX-101
+	 */
+	{	PCI_VENDOR_ID_INTASHIELD, 0x4005,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b0_2_115200 },
+	{	PCI_VENDOR_ID_INTASHIELD, 0x4019,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_oxsemi_2_15625000 },
+	/*
+	 * Brainboxes PX-235/246
+	 */
+	{	PCI_VENDOR_ID_INTASHIELD, 0x4004,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b0_1_115200 },
+	{	PCI_VENDOR_ID_INTASHIELD, 0x4016,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_oxsemi_1_15625000 },
+	/*
+	 * Brainboxes PX-203/PX-257
+	 */
+	{	PCI_VENDOR_ID_INTASHIELD, 0x4006,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b0_2_115200 },
+	{	PCI_VENDOR_ID_INTASHIELD, 0x4015,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_oxsemi_4_15625000 },
+	/*
+	 * Brainboxes PX-260/PX-701
+	 */
+	{	PCI_VENDOR_ID_INTASHIELD, 0x400A,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_oxsemi_4_15625000 },
+	/*
+	 * Brainboxes PX-310
+	 */
+	{	PCI_VENDOR_ID_INTASHIELD, 0x400E,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_oxsemi_2_15625000 },
+	/*
+	 * Brainboxes PX-313
+	 */
+	{	PCI_VENDOR_ID_INTASHIELD, 0x400C,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_oxsemi_2_15625000 },
+	/*
+	 * Brainboxes PX-320/324/PX-376/PX-387
+	 */
+	{	PCI_VENDOR_ID_INTASHIELD, 0x400B,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_oxsemi_1_15625000 },
+	/*
+	 * Brainboxes PX-335/346
+	 */
+	{	PCI_VENDOR_ID_INTASHIELD, 0x400F,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_oxsemi_4_15625000 },
+	/*
+	 * Brainboxes PX-368
+	 */
+	{       PCI_VENDOR_ID_INTASHIELD, 0x4010,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_oxsemi_4_15625000 },
+	/*
+	 * Brainboxes PX-420
+	 */
+	{	PCI_VENDOR_ID_INTASHIELD, 0x4000,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b0_4_115200 },
+	{	PCI_VENDOR_ID_INTASHIELD, 0x4011,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_oxsemi_4_15625000 },
+	/*
+	 * Brainboxes PX-803
+	 */
+	{	PCI_VENDOR_ID_INTASHIELD, 0x4009,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b0_1_115200 },
+	{	PCI_VENDOR_ID_INTASHIELD, 0x401E,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_oxsemi_1_15625000 },
+	/*
+	 * Brainboxes PX-846
+	 */
+	{	PCI_VENDOR_ID_INTASHIELD, 0x4008,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b0_1_115200 },
+	{	PCI_VENDOR_ID_INTASHIELD, 0x4017,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_oxsemi_1_15625000 },
+
+	/*
 	 * Perle PCI-RAS cards
 	 */
 	{       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030,
diff --git a/drivers/tty/serial/8250/8250_pericom.c b/drivers/tty/serial/8250/8250_pericom.c
index 95ff10f..b8d5b77 100644
--- a/drivers/tty/serial/8250/8250_pericom.c
+++ b/drivers/tty/serial/8250/8250_pericom.c
@@ -73,7 +73,7 @@ static void pericom_do_set_divisor(struct uart_port *port, unsigned int baud,
 			struct uart_8250_port *up = up_to_u8250p(port);
 			int lcr = serial_port_in(port, UART_LCR);
 
-			serial_port_out(port, UART_LCR, lcr | 0x80);
+			serial_port_out(port, UART_LCR, lcr | UART_LCR_DLAB);
 			serial_dl_write(up, divisor);
 			serial_port_out(port, 2, 16 - scr);
 			serial_port_out(port, UART_LCR, lcr);
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 3c36a06a..39b35a6 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -50,8 +50,6 @@
 #define DEBUG_AUTOCONF(fmt...)	do { } while (0)
 #endif
 
-#define BOTH_EMPTY	(UART_LSR_TEMT | UART_LSR_THRE)
-
 /*
  * Here we define the default xmit fifo size used for each type of UART.
  */
@@ -336,27 +334,29 @@ static void default_serial_dl_write(struct uart_8250_port *up, int value)
 
 #ifdef CONFIG_SERIAL_8250_RT288X
 
+#define UART_REG_UNMAPPED	-1
+
 /* Au1x00/RT288x UART hardware has a weird register layout */
 static const s8 au_io_in_map[8] = {
-	 0,	/* UART_RX  */
-	 2,	/* UART_IER */
-	 3,	/* UART_IIR */
-	 5,	/* UART_LCR */
-	 6,	/* UART_MCR */
-	 7,	/* UART_LSR */
-	 8,	/* UART_MSR */
-	-1,	/* UART_SCR (unmapped) */
+	[UART_RX]	= 0,
+	[UART_IER]	= 2,
+	[UART_IIR]	= 3,
+	[UART_LCR]	= 5,
+	[UART_MCR]	= 6,
+	[UART_LSR]	= 7,
+	[UART_MSR]	= 8,
+	[UART_SCR]	= UART_REG_UNMAPPED,
 };
 
 static const s8 au_io_out_map[8] = {
-	 1,	/* UART_TX  */
-	 2,	/* UART_IER */
-	 4,	/* UART_FCR */
-	 5,	/* UART_LCR */
-	 6,	/* UART_MCR */
-	-1,	/* UART_LSR (unmapped) */
-	-1,	/* UART_MSR (unmapped) */
-	-1,	/* UART_SCR (unmapped) */
+	[UART_TX]	= 1,
+	[UART_IER]	= 2,
+	[UART_FCR]	= 4,
+	[UART_LCR]	= 5,
+	[UART_MCR]	= 6,
+	[UART_LSR]	= UART_REG_UNMAPPED,
+	[UART_MSR]	= UART_REG_UNMAPPED,
+	[UART_SCR]	= UART_REG_UNMAPPED,
 };
 
 unsigned int au_serial_in(struct uart_port *p, int offset)
@@ -364,7 +364,7 @@ unsigned int au_serial_in(struct uart_port *p, int offset)
 	if (offset >= ARRAY_SIZE(au_io_in_map))
 		return UINT_MAX;
 	offset = au_io_in_map[offset];
-	if (offset < 0)
+	if (offset == UART_REG_UNMAPPED)
 		return UINT_MAX;
 	return __raw_readl(p->membase + (offset << p->regshift));
 }
@@ -374,7 +374,7 @@ void au_serial_out(struct uart_port *p, int offset, int value)
 	if (offset >= ARRAY_SIZE(au_io_out_map))
 		return;
 	offset = au_io_out_map[offset];
-	if (offset < 0)
+	if (offset == UART_REG_UNMAPPED)
 		return;
 	__raw_writel(value, p->membase + (offset << p->regshift));
 }
@@ -647,6 +647,14 @@ void serial8250_em485_destroy(struct uart_8250_port *p)
 }
 EXPORT_SYMBOL_GPL(serial8250_em485_destroy);
 
+struct serial_rs485 serial8250_em485_supported = {
+	.flags = SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND | SER_RS485_RTS_AFTER_SEND |
+		 SER_RS485_TERMINATE_BUS | SER_RS485_RX_DURING_TX,
+	.delay_rts_before_send = 1,
+	.delay_rts_after_send = 1,
+};
+EXPORT_SYMBOL_GPL(serial8250_em485_supported);
+
 /**
  * serial8250_em485_config() - generic ->rs485_config() callback
  * @port: uart port
@@ -656,7 +664,8 @@ EXPORT_SYMBOL_GPL(serial8250_em485_destroy);
  * if the uart is incapable of driving RTS as a Transmit Enable signal in
  * hardware, relying on software emulation instead.
  */
-int serial8250_em485_config(struct uart_port *port, struct serial_rs485 *rs485)
+int serial8250_em485_config(struct uart_port *port, struct ktermios *termios,
+			    struct serial_rs485 *rs485)
 {
 	struct uart_8250_port *up = up_to_u8250p(port);
 
@@ -667,29 +676,12 @@ int serial8250_em485_config(struct uart_port *port, struct serial_rs485 *rs485)
 		rs485->flags &= ~SER_RS485_RTS_AFTER_SEND;
 	}
 
-	/* clamp the delays to [0, 100ms] */
-	rs485->delay_rts_before_send = min(rs485->delay_rts_before_send, 100U);
-	rs485->delay_rts_after_send  = min(rs485->delay_rts_after_send, 100U);
-
-	memset(rs485->padding, 0, sizeof(rs485->padding));
-	port->rs485 = *rs485;
-
-	gpiod_set_value(port->rs485_term_gpio,
-			rs485->flags & SER_RS485_TERMINATE_BUS);
-
 	/*
 	 * Both serial8250_em485_init() and serial8250_em485_destroy()
 	 * are idempotent.
 	 */
-	if (rs485->flags & SER_RS485_ENABLED) {
-		int ret = serial8250_em485_init(up);
-
-		if (ret) {
-			rs485->flags &= ~SER_RS485_ENABLED;
-			port->rs485.flags &= ~SER_RS485_ENABLED;
-		}
-		return ret;
-	}
+	if (rs485->flags & SER_RS485_ENABLED)
+		return serial8250_em485_init(up);
 
 	serial8250_em485_destroy(up);
 	return 0;
@@ -849,7 +841,7 @@ static int size_fifo(struct uart_8250_port *up)
 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);
 	old_dl = serial_dl_read(up);
 	serial_dl_write(up, 0x0001);
-	serial_out(up, UART_LCR, 0x03);
+	serial_out(up, UART_LCR, UART_LCR_WLEN8);
 	for (count = 0; count < 256; count++)
 		serial_out(up, UART_TX, count);
 	mdelay(20);/* FIXME - schedule_timeout */
@@ -1503,18 +1495,12 @@ static void __stop_tx_rs485(struct uart_8250_port *p, u64 stop_delay)
 	}
 }
 
-static inline void __do_stop_tx(struct uart_8250_port *p)
-{
-	if (serial8250_clear_THRI(p))
-		serial8250_rpm_put_tx(p);
-}
-
 static inline void __stop_tx(struct uart_8250_port *p)
 {
 	struct uart_8250_em485 *em485 = p->em485;
 
 	if (em485) {
-		unsigned char lsr = serial_in(p, UART_LSR);
+		u16 lsr = serial_lsr_in(p);
 		u64 stop_delay = 0;
 
 		p->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS;
@@ -1522,7 +1508,7 @@ static inline void __stop_tx(struct uart_8250_port *p)
 		if (!(lsr & UART_LSR_THRE))
 			return;
 		/*
-		 * To provide required timeing and allow FIFO transfer,
+		 * To provide required timing and allow FIFO transfer,
 		 * __stop_tx_rs485() must be called only when both FIFO and
 		 * shift register are empty. The device driver should either
 		 * enable interrupt on TEMT or set UART_CAP_NOTEMT that will
@@ -1544,7 +1530,9 @@ static inline void __stop_tx(struct uart_8250_port *p)
 
 		__stop_tx_rs485(p, stop_delay);
 	}
-	__do_stop_tx(p);
+
+	if (serial8250_clear_THRI(p))
+		serial8250_rpm_put_tx(p);
 }
 
 static void serial8250_stop_tx(struct uart_port *port)
@@ -1573,10 +1561,8 @@ static inline void __start_tx(struct uart_port *port)
 
 	if (serial8250_set_THRI(up)) {
 		if (up->bugs & UART_BUG_TXEN) {
-			unsigned char lsr;
+			u16 lsr = serial_lsr_in(up);
 
-			lsr = serial_in(up, UART_LSR);
-			up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS;
 			if (lsr & UART_LSR_THRE)
 				serial8250_tx_chars(up);
 		}
@@ -1616,7 +1602,8 @@ void serial8250_em485_start_tx(struct uart_8250_port *up)
 }
 EXPORT_SYMBOL_GPL(serial8250_em485_start_tx);
 
-static inline void start_tx_rs485(struct uart_port *port)
+/* Returns false, if start_tx_timer was setup to defer TX start */
+static bool start_tx_rs485(struct uart_port *port)
 {
 	struct uart_8250_port *up = up_to_u8250p(port);
 	struct uart_8250_em485 *em485 = up->em485;
@@ -1644,11 +1631,11 @@ static inline void start_tx_rs485(struct uart_port *port)
 			em485->active_timer = &em485->start_tx_timer;
 			start_hrtimer_ms(&em485->start_tx_timer,
 					 up->port.rs485.delay_rts_before_send);
-			return;
+			return false;
 		}
 	}
 
-	__start_tx(port);
+	return true;
 }
 
 static enum hrtimer_restart serial8250_em485_handle_start_tx(struct hrtimer *t)
@@ -1678,14 +1665,12 @@ static void serial8250_start_tx(struct uart_port *port)
 
 	serial8250_rpm_get_tx(up);
 
-	if (em485 &&
-	    em485->active_timer == &em485->start_tx_timer)
-		return;
-
-	if (em485)
-		start_tx_rs485(port);
-	else
-		__start_tx(port);
+	if (em485) {
+		if ((em485->active_timer == &em485->start_tx_timer) ||
+		    !start_tx_rs485(port))
+			return;
+	}
+	__start_tx(port);
 }
 
 static void serial8250_throttle(struct uart_port *port)
@@ -1729,7 +1714,7 @@ static void serial8250_enable_ms(struct uart_port *port)
 	serial8250_rpm_put(up);
 }
 
-void serial8250_read_char(struct uart_8250_port *up, unsigned char lsr)
+void serial8250_read_char(struct uart_8250_port *up, u16 lsr)
 {
 	struct uart_port *port = &up->port;
 	unsigned char ch;
@@ -1792,11 +1777,13 @@ void serial8250_read_char(struct uart_8250_port *up, unsigned char lsr)
 EXPORT_SYMBOL_GPL(serial8250_read_char);
 
 /*
- * serial8250_rx_chars: processes according to the passed in LSR
- * value, and returns the remaining LSR bits not handled
- * by this Rx routine.
+ * serial8250_rx_chars - Read characters. The first LSR value must be passed in.
+ *
+ * Returns LSR bits. The caller should rely only on non-Rx related LSR bits
+ * (such as THRE) because the LSR value might come from an already consumed
+ * character.
  */
-unsigned char serial8250_rx_chars(struct uart_8250_port *up, unsigned char lsr)
+u16 serial8250_rx_chars(struct uart_8250_port *up, u16 lsr)
 {
 	struct uart_port *port = &up->port;
 	int max_count = 256;
@@ -1852,7 +1839,7 @@ void serial8250_tx_chars(struct uart_8250_port *up)
 		if (uart_circ_empty(xmit))
 			break;
 		if ((up->capabilities & UART_CAP_HFIFO) &&
-		    (serial_in(up, UART_LSR) & BOTH_EMPTY) != BOTH_EMPTY)
+		    !uart_lsr_tx_empty(serial_in(up, UART_LSR)))
 			break;
 		/* The BCM2835 MINI UART THRE bit is really a not-full bit. */
 		if ((up->capabilities & UART_CAP_MINI) &&
@@ -1916,17 +1903,17 @@ static bool handle_rx_dma(struct uart_8250_port *up, unsigned int iir)
  */
 int serial8250_handle_irq(struct uart_port *port, unsigned int iir)
 {
-	unsigned char status;
 	struct uart_8250_port *up = up_to_u8250p(port);
 	bool skip_rx = false;
 	unsigned long flags;
+	u16 status;
 
 	if (iir & UART_IIR_NO_INT)
 		return 0;
 
 	spin_lock_irqsave(&port->lock, flags);
 
-	status = serial_port_in(port, UART_LSR);
+	status = serial_lsr_in(up);
 
 	/*
 	 * If port is stopped and there are no error conditions in the
@@ -2002,18 +1989,17 @@ static unsigned int serial8250_tx_empty(struct uart_port *port)
 {
 	struct uart_8250_port *up = up_to_u8250p(port);
 	unsigned long flags;
-	unsigned int lsr;
+	u16 lsr;
 
 	serial8250_rpm_get(up);
 
 	spin_lock_irqsave(&port->lock, flags);
-	lsr = serial_port_in(port, UART_LSR);
-	up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS;
+	lsr = serial_lsr_in(up);
 	spin_unlock_irqrestore(&port->lock, flags);
 
 	serial8250_rpm_put(up);
 
-	return (lsr & BOTH_EMPTY) == BOTH_EMPTY ? TIOCSER_TEMT : 0;
+	return uart_lsr_tx_empty(lsr) ? TIOCSER_TEMT : 0;
 }
 
 unsigned int serial8250_do_get_mctrl(struct uart_port *port)
@@ -2084,9 +2070,7 @@ static void wait_for_lsr(struct uart_8250_port *up, int bits)
 
 	/* Wait up to 10ms for the character(s) to be sent. */
 	for (;;) {
-		status = serial_in(up, UART_LSR);
-
-		up->lsr_saved_flags |= status & LSR_SAVE_FLAGS;
+		status = serial_lsr_in(up);
 
 		if ((status & bits) == bits)
 			break;
@@ -2128,8 +2112,8 @@ static void wait_for_xmitr(struct uart_8250_port *up, int bits)
 static int serial8250_get_poll_char(struct uart_port *port)
 {
 	struct uart_8250_port *up = up_to_u8250p(port);
-	unsigned char lsr;
 	int status;
+	u16 lsr;
 
 	serial8250_rpm_get(up);
 
@@ -2163,7 +2147,7 @@ static void serial8250_put_poll_char(struct uart_port *port,
 	else
 		serial_port_out(port, UART_IER, 0);
 
-	wait_for_xmitr(up, BOTH_EMPTY);
+	wait_for_xmitr(up, UART_LSR_BOTH_EMPTY);
 	/*
 	 *	Send the character out.
 	 */
@@ -2173,7 +2157,7 @@ static void serial8250_put_poll_char(struct uart_port *port,
 	 *	Finally, wait for transmitter to become empty
 	 *	and restore the IER
 	 */
-	wait_for_xmitr(up, BOTH_EMPTY);
+	wait_for_xmitr(up, UART_LSR_BOTH_EMPTY);
 	serial_port_out(port, UART_IER, ier);
 	serial8250_rpm_put(up);
 }
@@ -2184,8 +2168,9 @@ int serial8250_do_startup(struct uart_port *port)
 {
 	struct uart_8250_port *up = up_to_u8250p(port);
 	unsigned long flags;
-	unsigned char lsr, iir;
+	unsigned char iir;
 	int retval;
+	u16 lsr;
 
 	if (!port->fifosize)
 		port->fifosize = uart_config[port->type].fifo_size;
@@ -2810,7 +2795,7 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
 		port->read_status_mask |= UART_LSR_BI;
 
 	/*
-	 * Characteres to ignore
+	 * Characters to ignore
 	 */
 	port->ignore_status_mask = 0;
 	if (termios->c_iflag & IGNPAR)
@@ -3203,7 +3188,7 @@ static void serial8250_config_port(struct uart_port *port, int flags)
 		autoconfig(up);
 
 	if (port->rs485.flags & SER_RS485_ENABLED)
-		port->rs485_config(port, &port->rs485);
+		uart_rs485_config(port);
 
 	/* if access method is AU, it is a 16550 with a quirk */
 	if (port->type == PORT_16550A && port->iotype == UPIO_AU)
@@ -3445,7 +3430,7 @@ void serial8250_console_write(struct uart_8250_port *up, const char *s,
 	 *	Finally, wait for transmitter to become empty
 	 *	and restore the IER
 	 */
-	wait_for_xmitr(up, BOTH_EMPTY);
+	wait_for_xmitr(up, UART_LSR_BOTH_EMPTY);
 
 	if (em485) {
 		mdelay(port->rs485.delay_rts_after_send);
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index fdb6c41..d0b49e1 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -254,6 +254,7 @@
 	depends on SERIAL_8250
 	depends on OF
 	depends on REGMAP && MFD_SYSCON
+	depends on ARCH_ASPEED || COMPILE_TEST
 	help
 	  If you want to use the virtual UART (VUART) device on Aspeed
 	  BMC platforms, enable this option. This enables the 16550A-
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 7172cd1..8771739 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -324,6 +324,7 @@
 	depends on SPI_MASTER
 	select SERIAL_CORE
 	select REGMAP_SPI if SPI_MASTER
+	select REGMAP_I2C if I2C
 	help
 	  This selects support for an advanced UART from Maxim (Dallas).
 	  Supported ICs are MAX3107, MAX3108, MAX3109, MAX14830.
@@ -889,23 +890,6 @@
 	bool "TX39XX/49XX SIO act as standard serial"
 	depends on !SERIAL_8250 && SERIAL_TXX9
 
-config SERIAL_VR41XX
-	tristate "NEC VR4100 series Serial Interface Unit support"
-	depends on CPU_VR41XX
-	select SERIAL_CORE
-	help
-	  If you have a NEC VR4100 series processor and you want to use
-	  Serial Interface Unit(SIU) or Debug Serial Interface Unit(DSIU)
-	  (not include VR4111/VR4121 DSIU), say Y.  Otherwise, say N.
-
-config SERIAL_VR41XX_CONSOLE
-	bool "Enable NEC VR4100 series Serial Interface Unit console"
-	depends on SERIAL_VR41XX=y
-	select SERIAL_CORE_CONSOLE
-	help
-	  If you have a NEC VR4100 series processor and you want to use
-	  a console on a serial port, say Y.  Otherwise, say N.
-
 config SERIAL_JSM
 	tristate "Digi International NEO and Classic PCI Support"
 	depends on PCI
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index 61cc8de..238a955 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -51,7 +51,6 @@
 obj-$(CONFIG_SERIAL_SC16IS7XX_CORE) += sc16is7xx.o
 obj-$(CONFIG_SERIAL_JSM) += jsm/
 obj-$(CONFIG_SERIAL_TXX9) += serial_txx9.o
-obj-$(CONFIG_SERIAL_VR41XX) += vr41xx_siu.o
 obj-$(CONFIG_SERIAL_ATMEL) += atmel_serial.o
 obj-$(CONFIG_SERIAL_UARTLITE) += uartlite.o
 obj-$(CONFIG_SERIAL_MSM) += msm_serial.o
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 16a2142..15f0e4d 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -2214,7 +2214,7 @@ static int pl011_verify_port(struct uart_port *port, struct serial_struct *ser)
 	return ret;
 }
 
-static int pl011_rs485_config(struct uart_port *port,
+static int pl011_rs485_config(struct uart_port *port, struct ktermios *termios,
 			      struct serial_rs485 *rs485)
 {
 	struct uart_amba_port *uap =
@@ -2700,17 +2700,12 @@ static int pl011_find_free_port(void)
 static int pl011_get_rs485_mode(struct uart_amba_port *uap)
 {
 	struct uart_port *port = &uap->port;
-	struct serial_rs485 *rs485 = &port->rs485;
 	int ret;
 
 	ret = uart_get_rs485_mode(port);
 	if (ret)
 		return ret;
 
-	/* clamp the delays to [0, 100ms] */
-	rs485->delay_rts_before_send = min(rs485->delay_rts_before_send, 100U);
-	rs485->delay_rts_after_send = min(rs485->delay_rts_after_send, 100U);
-
 	return 0;
 }
 
@@ -2770,6 +2765,13 @@ static int pl011_register_port(struct uart_amba_port *uap)
 	return ret;
 }
 
+static const struct serial_rs485 pl011_rs485_supported = {
+	.flags = SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND | SER_RS485_RTS_AFTER_SEND |
+		 SER_RS485_RX_DURING_TX,
+	.delay_rts_before_send = 1,
+	.delay_rts_after_send = 1,
+};
+
 static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
 {
 	struct uart_amba_port *uap;
@@ -2796,6 +2798,7 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
 	uap->port.irq = dev->irq[0];
 	uap->port.ops = &amba_pl011_pops;
 	uap->port.rs485_config = pl011_rs485_config;
+	uap->port.rs485_supported = pl011_rs485_supported;
 	snprintf(uap->type, sizeof(uap->type), "PL011 rev%u", amba_rev(dev));
 
 	ret = pl011_setup_port(&dev->dev, uap, &dev->res, portnr);
diff --git a/drivers/tty/serial/ar933x_uart.c b/drivers/tty/serial/ar933x_uart.c
index 6269dbf..32caeac 100644
--- a/drivers/tty/serial/ar933x_uart.c
+++ b/drivers/tty/serial/ar933x_uart.c
@@ -580,18 +580,9 @@ static const struct uart_ops ar933x_uart_ops = {
 	.verify_port	= ar933x_uart_verify_port,
 };
 
-static int ar933x_config_rs485(struct uart_port *port,
+static int ar933x_config_rs485(struct uart_port *port, struct ktermios *termios,
 				struct serial_rs485 *rs485conf)
 {
-	struct ar933x_uart_port *up =
-		container_of(port, struct ar933x_uart_port, port);
-
-	if ((rs485conf->flags & SER_RS485_ENABLED) &&
-	    !up->rts_gpiod) {
-		dev_err(port->dev, "RS485 needs rts-gpio\n");
-		return 1;
-	}
-	port->rs485 = *rs485conf;
 	return 0;
 }
 
@@ -702,6 +693,11 @@ static struct uart_driver ar933x_uart_driver = {
 	.cons		= NULL, /* filled in runtime */
 };
 
+static const struct serial_rs485 ar933x_no_rs485 = {};
+static const struct serial_rs485 ar933x_rs485_supported = {
+	.flags = SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND | SER_RS485_RTS_AFTER_SEND,
+};
+
 static int ar933x_uart_probe(struct platform_device *pdev)
 {
 	struct ar933x_uart_port *up;
@@ -773,6 +769,7 @@ static int ar933x_uart_probe(struct platform_device *pdev)
 	port->fifosize = AR933X_UART_FIFO_SIZE;
 	port->ops = &ar933x_uart_ops;
 	port->rs485_config = ar933x_config_rs485;
+	port->rs485_supported = ar933x_rs485_supported;
 
 	baud = ar933x_uart_get_baud(port->uartclk, AR933X_UART_MAX_SCALE, 1);
 	up->min_baud = max_t(unsigned int, baud, AR933X_UART_MIN_BAUD);
@@ -792,10 +789,12 @@ static int ar933x_uart_probe(struct platform_device *pdev)
 
 	up->rts_gpiod = mctrl_gpio_to_gpiod(up->gpios, UART_GPIO_RTS);
 
-	if ((port->rs485.flags & SER_RS485_ENABLED) &&
-	    !up->rts_gpiod) {
-		dev_err(&pdev->dev, "lacking rts-gpio, disabling RS485\n");
-		port->rs485.flags &= ~SER_RS485_ENABLED;
+	if (!up->rts_gpiod) {
+		port->rs485_supported = ar933x_no_rs485;
+		if (port->rs485.flags & SER_RS485_ENABLED) {
+			dev_err(&pdev->dev, "lacking rts-gpio, disabling RS485\n");
+			port->rs485.flags &= ~SER_RS485_ENABLED;
+		}
 	}
 
 #ifdef CONFIG_SERIAL_AR933X_CONSOLE
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index dd1c7e4..30ba9ee 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -166,7 +166,6 @@ struct atmel_uart_port {
 	unsigned int		fidi_min;
 	unsigned int		fidi_max;
 
-#ifdef CONFIG_PM
 	struct {
 		u32		cr;
 		u32		mr;
@@ -177,7 +176,6 @@ struct atmel_uart_port {
 		u32		fmr;
 		u32		fimr;
 	} cache;
-#endif
 
 	int (*prepare_rx)(struct uart_port *port);
 	int (*prepare_tx)(struct uart_port *port);
@@ -285,7 +283,7 @@ static void atmel_tasklet_schedule(struct atmel_uart_port *atmel_port,
 }
 
 /* Enable or disable the rs485 support */
-static int atmel_config_rs485(struct uart_port *port,
+static int atmel_config_rs485(struct uart_port *port, struct ktermios *termios,
 			      struct serial_rs485 *rs485conf)
 {
 	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
@@ -2473,6 +2471,12 @@ static const struct uart_ops atmel_pops = {
 #endif
 };
 
+static const struct serial_rs485 atmel_rs485_supported = {
+	.flags = SER_RS485_ENABLED | SER_RS485_RTS_AFTER_SEND | SER_RS485_RX_DURING_TX,
+	.delay_rts_before_send = 1,
+	.delay_rts_after_send = 1,
+};
+
 /*
  * Configure the port from the platform device resource info.
  */
@@ -2494,6 +2498,7 @@ static int atmel_init_port(struct atmel_uart_port *atmel_port,
 	port->mapbase		= mpdev->resource[0].start;
 	port->irq		= platform_get_irq(mpdev, 0);
 	port->rs485_config	= atmel_config_rs485;
+	port->rs485_supported	= atmel_rs485_supported;
 	port->iso7816_config	= atmel_config_iso7816;
 	port->membase		= NULL;
 
@@ -2503,24 +2508,7 @@ static int atmel_init_port(struct atmel_uart_port *atmel_port,
 	if (ret)
 		return ret;
 
-	/* for console, the clock could already be configured */
-	if (!atmel_port->clk) {
-		atmel_port->clk = clk_get(&mpdev->dev, "usart");
-		if (IS_ERR(atmel_port->clk)) {
-			ret = PTR_ERR(atmel_port->clk);
-			atmel_port->clk = NULL;
-			return ret;
-		}
-		ret = clk_prepare_enable(atmel_port->clk);
-		if (ret) {
-			clk_put(atmel_port->clk);
-			atmel_port->clk = NULL;
-			return ret;
-		}
-		port->uartclk = clk_get_rate(atmel_port->clk);
-		clk_disable_unprepare(atmel_port->clk);
-		/* only enable clock when USART is in use */
-	}
+	port->uartclk = clk_get_rate(atmel_port->clk);
 
 	/*
 	 * Use TXEMPTY for interrupt when rs485 or ISO7816 else TXRDY or
@@ -2629,7 +2617,6 @@ static void __init atmel_console_get_options(struct uart_port *port, int *baud,
 
 static int __init atmel_console_setup(struct console *co, char *options)
 {
-	int ret;
 	struct uart_port *port = &atmel_ports[co->index].uart;
 	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
 	int baud = 115200;
@@ -2642,10 +2629,6 @@ static int __init atmel_console_setup(struct console *co, char *options)
 		return -ENODEV;
 	}
 
-	ret = clk_prepare_enable(atmel_ports[co->index].clk);
-	if (ret)
-		return ret;
-
 	atmel_uart_writel(port, ATMEL_US_IDR, -1);
 	atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_RSTSTA | ATMEL_US_RSTRX);
 	atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_TXEN | ATMEL_US_RXEN);
@@ -2711,7 +2694,6 @@ static struct uart_driver atmel_uart = {
 	.cons		= ATMEL_CONSOLE_DEVICE,
 };
 
-#ifdef CONFIG_PM
 static bool atmel_serial_clk_will_stop(void)
 {
 #ifdef CONFIG_ARCH_AT91
@@ -2721,10 +2703,9 @@ static bool atmel_serial_clk_will_stop(void)
 #endif
 }
 
-static int atmel_serial_suspend(struct platform_device *pdev,
-				pm_message_t state)
+static int __maybe_unused atmel_serial_suspend(struct device *dev)
 {
-	struct uart_port *port = platform_get_drvdata(pdev);
+	struct uart_port *port = dev_get_drvdata(dev);
 	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
 
 	if (uart_console(port) && console_suspend_enabled) {
@@ -2749,14 +2730,14 @@ static int atmel_serial_suspend(struct platform_device *pdev,
 	}
 
 	/* we can not wake up if we're running on slow clock */
-	atmel_port->may_wakeup = device_may_wakeup(&pdev->dev);
+	atmel_port->may_wakeup = device_may_wakeup(dev);
 	if (atmel_serial_clk_will_stop()) {
 		unsigned long flags;
 
 		spin_lock_irqsave(&atmel_port->lock_suspended, flags);
 		atmel_port->suspended = true;
 		spin_unlock_irqrestore(&atmel_port->lock_suspended, flags);
-		device_set_wakeup_enable(&pdev->dev, 0);
+		device_set_wakeup_enable(dev, 0);
 	}
 
 	uart_suspend_port(&atmel_uart, port);
@@ -2764,9 +2745,9 @@ static int atmel_serial_suspend(struct platform_device *pdev,
 	return 0;
 }
 
-static int atmel_serial_resume(struct platform_device *pdev)
+static int __maybe_unused atmel_serial_resume(struct device *dev)
 {
-	struct uart_port *port = platform_get_drvdata(pdev);
+	struct uart_port *port = dev_get_drvdata(dev);
 	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
 	unsigned long flags;
 
@@ -2801,14 +2782,10 @@ static int atmel_serial_resume(struct platform_device *pdev)
 	spin_unlock_irqrestore(&atmel_port->lock_suspended, flags);
 
 	uart_resume_port(&atmel_uart, port);
-	device_set_wakeup_enable(&pdev->dev, atmel_port->may_wakeup);
+	device_set_wakeup_enable(dev, atmel_port->may_wakeup);
 
 	return 0;
 }
-#else
-#define atmel_serial_suspend NULL
-#define atmel_serial_resume NULL
-#endif
 
 static void atmel_serial_probe_fifos(struct atmel_uart_port *atmel_port,
 				     struct platform_device *pdev)
@@ -2897,14 +2874,23 @@ static int atmel_serial_probe(struct platform_device *pdev)
 	atomic_set(&atmel_port->tasklet_shutdown, 0);
 	spin_lock_init(&atmel_port->lock_suspended);
 
+	atmel_port->clk = devm_clk_get(&pdev->dev, "usart");
+	if (IS_ERR(atmel_port->clk)) {
+		ret = PTR_ERR(atmel_port->clk);
+		goto err;
+	}
+	ret = clk_prepare_enable(atmel_port->clk);
+	if (ret)
+		goto err;
+
 	ret = atmel_init_port(atmel_port, pdev);
 	if (ret)
-		goto err_clear_bit;
+		goto err_clk_disable_unprepare;
 
 	atmel_port->gpios = mctrl_gpio_init(&atmel_port->uart, 0);
 	if (IS_ERR(atmel_port->gpios)) {
 		ret = PTR_ERR(atmel_port->gpios);
-		goto err_clear_bit;
+		goto err_clk_disable_unprepare;
 	}
 
 	if (!atmel_use_pdc_rx(&atmel_port->uart)) {
@@ -2913,7 +2899,7 @@ static int atmel_serial_probe(struct platform_device *pdev)
 				     sizeof(struct atmel_uart_char),
 				     GFP_KERNEL);
 		if (!data)
-			goto err_alloc_ring;
+			goto err_clk_disable_unprepare;
 		atmel_port->rx_ring.buf = data;
 	}
 
@@ -2923,26 +2909,9 @@ static int atmel_serial_probe(struct platform_device *pdev)
 	if (ret)
 		goto err_add_port;
 
-#ifdef CONFIG_SERIAL_ATMEL_CONSOLE
-	if (uart_console(&atmel_port->uart)
-			&& ATMEL_CONSOLE_DEVICE->flags & CON_ENABLED) {
-		/*
-		 * The serial core enabled the clock for us, so undo
-		 * the clk_prepare_enable() in atmel_console_setup()
-		 */
-		clk_disable_unprepare(atmel_port->clk);
-	}
-#endif
-
 	device_init_wakeup(&pdev->dev, 1);
 	platform_set_drvdata(pdev, atmel_port);
 
-	/*
-	 * The peripheral clock has been disabled by atmel_init_port():
-	 * enable it before accessing I/O registers
-	 */
-	clk_prepare_enable(atmel_port->clk);
-
 	if (rs485_enabled) {
 		atmel_uart_writel(&atmel_port->uart, ATMEL_US_MR,
 				  ATMEL_US_USMODE_NORMAL);
@@ -2966,12 +2935,8 @@ static int atmel_serial_probe(struct platform_device *pdev)
 err_add_port:
 	kfree(atmel_port->rx_ring.buf);
 	atmel_port->rx_ring.buf = NULL;
-err_alloc_ring:
-	if (!uart_console(&atmel_port->uart)) {
-		clk_put(atmel_port->clk);
-		atmel_port->clk = NULL;
-	}
-err_clear_bit:
+err_clk_disable_unprepare:
+	clk_disable_unprepare(atmel_port->clk);
 	clear_bit(atmel_port->uart.line, atmel_ports_in_use);
 err:
 	return ret;
@@ -3005,21 +2970,21 @@ static int atmel_serial_remove(struct platform_device *pdev)
 
 	clear_bit(port->line, atmel_ports_in_use);
 
-	clk_put(atmel_port->clk);
-	atmel_port->clk = NULL;
 	pdev->dev.of_node = NULL;
 
 	return ret;
 }
 
+static SIMPLE_DEV_PM_OPS(atmel_serial_pm_ops, atmel_serial_suspend,
+			 atmel_serial_resume);
+
 static struct platform_driver atmel_serial_driver = {
 	.probe		= atmel_serial_probe,
 	.remove		= atmel_serial_remove,
-	.suspend	= atmel_serial_suspend,
-	.resume		= atmel_serial_resume,
 	.driver		= {
 		.name			= "atmel_usart_serial",
 		.of_match_table		= of_match_ptr(atmel_serial_dt_ids),
+		.pm			= pm_ptr(&atmel_serial_pm_ops),
 	},
 };
 
diff --git a/drivers/tty/serial/earlycon.c b/drivers/tty/serial/earlycon.c
index 57c7085..88d08ba 100644
--- a/drivers/tty/serial/earlycon.c
+++ b/drivers/tty/serial/earlycon.c
@@ -253,6 +253,9 @@ int __init of_setup_earlycon(const struct earlycon_id *match,
 	bool big_endian;
 	u64 addr;
 
+	if (early_con.flags & CON_ENABLED)
+		return -EALREADY;
+
 	spin_lock_init(&port->lock);
 	port->iotype = UPIO_MEM;
 	addr = of_flat_dt_translate_address(node);
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index 0d6e62f..f6c33cd 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -274,6 +274,8 @@ struct lpuart_port {
 	int			rx_dma_rng_buf_len;
 	unsigned int		dma_tx_nents;
 	wait_queue_head_t	dma_wait;
+	bool			is_cs7; /* Set to true when character size is 7 */
+					/* and the parity is enabled		*/
 };
 
 struct lpuart_soc_data {
@@ -990,12 +992,12 @@ static void lpuart32_rxint(struct lpuart_port *sport)
 
 		if (sr & (UARTSTAT_PE | UARTSTAT_OR | UARTSTAT_FE)) {
 			if (sr & UARTSTAT_PE) {
+				sport->port.icount.parity++;
+			} else if (sr & UARTSTAT_FE) {
 				if (is_break)
 					sport->port.icount.brk++;
 				else
-					sport->port.icount.parity++;
-			} else if (sr & UARTSTAT_FE) {
-				sport->port.icount.frame++;
+					sport->port.icount.frame++;
 			}
 
 			if (sr & UARTSTAT_OR)
@@ -1010,18 +1012,21 @@ static void lpuart32_rxint(struct lpuart_port *sport)
 			sr &= sport->port.read_status_mask;
 
 			if (sr & UARTSTAT_PE) {
+				flg = TTY_PARITY;
+			} else if (sr & UARTSTAT_FE) {
 				if (is_break)
 					flg = TTY_BREAK;
 				else
-					flg = TTY_PARITY;
-			} else if (sr & UARTSTAT_FE) {
-				flg = TTY_FRAME;
+					flg = TTY_FRAME;
 			}
 
 			if (sr & UARTSTAT_OR)
 				flg = TTY_OVERRUN;
 		}
 
+		if (sport->is_cs7)
+			rx &= 0x7F;
+
 		if (tty_insert_flip_char(port, rx, flg) == 0)
 			sport->port.icount.buf_overrun++;
 	}
@@ -1107,6 +1112,17 @@ static void lpuart_handle_sysrq(struct lpuart_port *sport)
 	}
 }
 
+static int lpuart_tty_insert_flip_string(struct tty_port *port,
+	unsigned char *chars, size_t size, bool is_cs7)
+{
+	int i;
+
+	if (is_cs7)
+		for (i = 0; i < size; i++)
+			chars[i] &= 0x7F;
+	return tty_insert_flip_string(port, chars, size);
+}
+
 static void lpuart_copy_rx_to_tty(struct lpuart_port *sport)
 {
 	struct tty_port *port = &sport->port.state->port;
@@ -1217,7 +1233,8 @@ static void lpuart_copy_rx_to_tty(struct lpuart_port *sport)
 	if (ring->head < ring->tail) {
 		count = sport->rx_sgl.length - ring->tail;
 
-		copied = tty_insert_flip_string(port, ring->buf + ring->tail, count);
+		copied = lpuart_tty_insert_flip_string(port, ring->buf + ring->tail,
+					count, sport->is_cs7);
 		if (copied != count)
 			sport->port.icount.buf_overrun++;
 		ring->tail = 0;
@@ -1227,7 +1244,8 @@ static void lpuart_copy_rx_to_tty(struct lpuart_port *sport)
 	/* Finally we read data from tail to head */
 	if (ring->tail < ring->head) {
 		count = ring->head - ring->tail;
-		copied = tty_insert_flip_string(port, ring->buf + ring->tail, count);
+		copied = lpuart_tty_insert_flip_string(port, ring->buf + ring->tail,
+					count, sport->is_cs7);
 		if (copied != count)
 			sport->port.icount.buf_overrun++;
 		/* Wrap ring->head if needed */
@@ -1355,7 +1373,7 @@ static void lpuart_dma_rx_free(struct uart_port *port)
 	sport->dma_rx_cookie = -EINVAL;
 }
 
-static int lpuart_config_rs485(struct uart_port *port,
+static int lpuart_config_rs485(struct uart_port *port, struct ktermios *termios,
 			struct serial_rs485 *rs485)
 {
 	struct lpuart_port *sport = container_of(port,
@@ -1365,11 +1383,6 @@ static int lpuart_config_rs485(struct uart_port *port,
 		~(UARTMODEM_TXRTSPOL | UARTMODEM_TXRTSE);
 	writeb(modem, sport->port.membase + UARTMODEM);
 
-	/* clear unsupported configurations */
-	rs485->delay_rts_before_send = 0;
-	rs485->delay_rts_after_send = 0;
-	rs485->flags &= ~SER_RS485_RX_DURING_TX;
-
 	if (rs485->flags & SER_RS485_ENABLED) {
 		/* Enable auto RS-485 RTS mode */
 		modem |= UARTMODEM_TXRTSE;
@@ -1390,7 +1403,7 @@ static int lpuart_config_rs485(struct uart_port *port,
 	return 0;
 }
 
-static int lpuart32_config_rs485(struct uart_port *port,
+static int lpuart32_config_rs485(struct uart_port *port, struct ktermios *termios,
 			struct serial_rs485 *rs485)
 {
 	struct lpuart_port *sport = container_of(port,
@@ -1400,11 +1413,6 @@ static int lpuart32_config_rs485(struct uart_port *port,
 				& ~(UARTMODEM_TXRTSPOL | UARTMODEM_TXRTSE);
 	lpuart32_write(&sport->port, modem, UARTMODIR);
 
-	/* clear unsupported configurations */
-	rs485->delay_rts_before_send = 0;
-	rs485->delay_rts_after_send = 0;
-	rs485->flags &= ~SER_RS485_RX_DURING_TX;
-
 	if (rs485->flags & SER_RS485_ENABLED) {
 		/* Enable auto RS-485 RTS mode */
 		modem |= UARTMODEM_TXRTSE;
@@ -2076,6 +2084,7 @@ lpuart32_set_termios(struct uart_port *port, struct ktermios *termios,
 	ctrl = old_ctrl = lpuart32_read(&sport->port, UARTCTRL);
 	bd = lpuart32_read(&sport->port, UARTBAUD);
 	modem = lpuart32_read(&sport->port, UARTMODIR);
+	sport->is_cs7 = false;
 	/*
 	 * only support CS8 and CS7, and for CS7 must enable PE.
 	 * supported mode:
@@ -2194,6 +2203,9 @@ lpuart32_set_termios(struct uart_port *port, struct ktermios *termios,
 	lpuart32_write(&sport->port, ctrl, UARTCTRL);
 	/* restore control register */
 
+	if ((ctrl & (UARTCTRL_PE | UARTCTRL_M)) == UARTCTRL_PE)
+		sport->is_cs7 = true;
+
 	if (old && sport->lpuart_dma_rx_use) {
 		if (!lpuart_start_rx_dma(sport))
 			rx_dma_timer_init(sport);
@@ -2621,6 +2633,11 @@ static struct uart_driver lpuart_reg = {
 	.cons		= LPUART_CONSOLE,
 };
 
+static const struct serial_rs485 lpuart_rs485_supported = {
+	.flags = SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND | SER_RS485_RTS_AFTER_SEND,
+	/* delay_rts_* and RX_DURING_TX are not supported */
+};
+
 static int lpuart_probe(struct platform_device *pdev)
 {
 	const struct lpuart_soc_data *sdata = of_device_get_match_data(&pdev->dev);
@@ -2660,6 +2677,7 @@ static int lpuart_probe(struct platform_device *pdev)
 		sport->port.rs485_config = lpuart32_config_rs485;
 	else
 		sport->port.rs485_config = lpuart_config_rs485;
+	sport->port.rs485_supported = lpuart_rs485_supported;
 
 	sport->ipg_clk = devm_clk_get(&pdev->dev, "ipg");
 	if (IS_ERR(sport->ipg_clk)) {
@@ -2717,14 +2735,7 @@ static int lpuart_probe(struct platform_device *pdev)
 	if (ret)
 		goto failed_get_rs485;
 
-	if (sport->port.rs485.flags & SER_RS485_RX_DURING_TX)
-		dev_err(&pdev->dev, "driver doesn't support RX during TX\n");
-
-	if (sport->port.rs485.delay_rts_before_send ||
-	    sport->port.rs485.delay_rts_after_send)
-		dev_err(&pdev->dev, "driver doesn't support RTS delays\n");
-
-	sport->port.rs485_config(&sport->port, &sport->port.rs485);
+	uart_rs485_config(&sport->port);
 
 	ret = devm_request_irq(&pdev->dev, sport->port.irq, handler, 0,
 				DRIVER_NAME, sport);
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 30edb35..522445a 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -1907,16 +1907,12 @@ static void imx_uart_poll_put_char(struct uart_port *port, unsigned char c)
 #endif
 
 /* called with port.lock taken and irqs off or from .probe without locking */
-static int imx_uart_rs485_config(struct uart_port *port,
+static int imx_uart_rs485_config(struct uart_port *port, struct ktermios *termios,
 				 struct serial_rs485 *rs485conf)
 {
 	struct imx_port *sport = (struct imx_port *)port;
 	u32 ucr2;
 
-	/* RTS is required to control the transmitter */
-	if (!sport->have_rtscts && !sport->have_rtsgpio)
-		rs485conf->flags &= ~SER_RS485_ENABLED;
-
 	if (rs485conf->flags & SER_RS485_ENABLED) {
 		/* Enable receiver if low-active RTS signal is requested */
 		if (sport->have_rtscts &&  !sport->have_rtsgpio &&
@@ -2200,6 +2196,14 @@ static enum hrtimer_restart imx_trigger_stop_tx(struct hrtimer *t)
 	return HRTIMER_NORESTART;
 }
 
+static const struct serial_rs485 imx_no_rs485 = {};	/* No RS485 if no RTS */
+static const struct serial_rs485 imx_rs485_supported = {
+	.flags = SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND | SER_RS485_RTS_AFTER_SEND |
+		 SER_RS485_RX_DURING_TX,
+	.delay_rts_before_send = 1,
+	.delay_rts_after_send = 1,
+};
+
 /* Default RX DMA buffer configuration */
 #define RX_DMA_PERIODS		16
 #define RX_DMA_PERIOD_LEN	(PAGE_SIZE / 4)
@@ -2279,6 +2283,11 @@ static int imx_uart_probe(struct platform_device *pdev)
 	sport->port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_IMX_CONSOLE);
 	sport->port.ops = &imx_uart_pops;
 	sport->port.rs485_config = imx_uart_rs485_config;
+	/* RTS is required to control the RS485 transmitter */
+	if (sport->have_rtscts || sport->have_rtsgpio)
+		sport->port.rs485_supported = imx_rs485_supported;
+	else
+		sport->port.rs485_supported = imx_no_rs485;
 	sport->port.flags = UPF_BOOT_AUTOCONF;
 	timer_setup(&sport->timer, imx_uart_timeout, 0);
 
@@ -2338,7 +2347,7 @@ static int imx_uart_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev,
 			"low-active RTS not possible when receiver is off, enabling receiver\n");
 
-	imx_uart_rs485_config(&sport->port, &sport->port.rs485);
+	uart_rs485_config(&sport->port);
 
 	/* Disable interrupts before requesting them */
 	ucr1 = imx_uart_readl(sport, UCR1);
diff --git a/drivers/tty/serial/kgdboc.c b/drivers/tty/serial/kgdboc.c
index 79b7db8..7aa37be 100644
--- a/drivers/tty/serial/kgdboc.c
+++ b/drivers/tty/serial/kgdboc.c
@@ -342,7 +342,7 @@ static int param_set_kgdboc_var(const char *kmessage,
 	/*
 	 * Configure with the new params as long as init already ran.
 	 * Note that we can get called before init if someone loads us
-	 * with "modprobe kgdboc kgdboc=..." or if they happen to use the
+	 * with "modprobe kgdboc kgdboc=..." or if they happen to use
 	 * the odd syntax of "kgdboc.kgdboc=..." on the kernel command.
 	 */
 	if (configured >= 0)
diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c
index a0b6ea5..ab10ca4 100644
--- a/drivers/tty/serial/max310x.c
+++ b/drivers/tty/serial/max310x.c
@@ -14,6 +14,7 @@
 #include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/gpio/driver.h>
+#include <linux/i2c.h>
 #include <linux/module.h>
 #include <linux/mod_devicetable.h>
 #include <linux/property.h>
@@ -72,7 +73,8 @@
 #define MAX310X_GLOBALCMD_REG		MAX310X_REG_1F /* Global Command (WO) */
 
 /* Extended registers */
-#define MAX310X_REVID_EXTREG		MAX310X_REG_05 /* Revision ID */
+#define MAX310X_SPI_REVID_EXTREG	MAX310X_REG_05 /* Revision ID */
+#define MAX310X_I2C_REVID_EXTREG	(0x25) /* Revision ID */
 
 /* IRQ register bits */
 #define MAX310X_IRQ_LSR_BIT		(1 << 0) /* LSR interrupt */
@@ -245,7 +247,17 @@
 #define MAX14830_BRGCFG_CLKDIS_BIT	(1 << 6) /* Clock Disable */
 #define MAX14830_REV_ID			(0xb0)
 
+struct max310x_if_cfg {
+	int (*extended_reg_enable)(struct device *dev, bool enable);
+
+	unsigned int rev_id_reg;
+};
+
 struct max310x_devtype {
+	struct {
+		unsigned short min;
+		unsigned short max;
+	} slave_addr;
 	char	name[9];
 	int	nr;
 	u8	mode1;
@@ -258,9 +270,8 @@ struct max310x_one {
 	struct work_struct	tx_work;
 	struct work_struct	md_work;
 	struct work_struct	rs_work;
+	struct regmap		*regmap;
 
-	u8 wr_header;
-	u8 rd_header;
 	u8 rx_buf[MAX310X_FIFO_SIZE];
 };
 #define to_max310x_port(_port) \
@@ -268,6 +279,7 @@ struct max310x_one {
 
 struct max310x_port {
 	const struct max310x_devtype *devtype;
+	const struct max310x_if_cfg *if_cfg;
 	struct regmap		*regmap;
 	struct clk		*clk;
 #ifdef CONFIG_GPIOLIB
@@ -289,26 +301,26 @@ static DECLARE_BITMAP(max310x_lines, MAX310X_UART_NRMAX);
 
 static u8 max310x_port_read(struct uart_port *port, u8 reg)
 {
-	struct max310x_port *s = dev_get_drvdata(port->dev);
+	struct max310x_one *one = to_max310x_port(port);
 	unsigned int val = 0;
 
-	regmap_read(s->regmap, port->iobase + reg, &val);
+	regmap_read(one->regmap, reg, &val);
 
 	return val;
 }
 
 static void max310x_port_write(struct uart_port *port, u8 reg, u8 val)
 {
-	struct max310x_port *s = dev_get_drvdata(port->dev);
+	struct max310x_one *one = to_max310x_port(port);
 
-	regmap_write(s->regmap, port->iobase + reg, val);
+	regmap_write(one->regmap, reg, val);
 }
 
 static void max310x_port_update(struct uart_port *port, u8 reg, u8 mask, u8 val)
 {
-	struct max310x_port *s = dev_get_drvdata(port->dev);
+	struct max310x_one *one = to_max310x_port(port);
 
-	regmap_update_bits(s->regmap, port->iobase + reg, mask, val);
+	regmap_update_bits(one->regmap, reg, mask, val);
 }
 
 static int max3107_detect(struct device *dev)
@@ -357,13 +369,12 @@ static int max3109_detect(struct device *dev)
 	unsigned int val = 0;
 	int ret;
 
-	ret = regmap_write(s->regmap, MAX310X_GLOBALCMD_REG,
-			   MAX310X_EXTREG_ENBL);
+	ret = s->if_cfg->extended_reg_enable(dev, true);
 	if (ret)
 		return ret;
 
-	regmap_read(s->regmap, MAX310X_REVID_EXTREG, &val);
-	regmap_write(s->regmap, MAX310X_GLOBALCMD_REG, MAX310X_EXTREG_DSBL);
+	regmap_read(s->regmap, s->if_cfg->rev_id_reg, &val);
+	s->if_cfg->extended_reg_enable(dev, false);
 	if (((val & MAX310x_REV_MASK) != MAX3109_REV_ID)) {
 		dev_err(dev,
 			"%s ID 0x%02x does not match\n", s->devtype->name, val);
@@ -388,13 +399,12 @@ static int max14830_detect(struct device *dev)
 	unsigned int val = 0;
 	int ret;
 
-	ret = regmap_write(s->regmap, MAX310X_GLOBALCMD_REG,
-			   MAX310X_EXTREG_ENBL);
+	ret = s->if_cfg->extended_reg_enable(dev, true);
 	if (ret)
 		return ret;
 	
-	regmap_read(s->regmap, MAX310X_REVID_EXTREG, &val);
-	regmap_write(s->regmap, MAX310X_GLOBALCMD_REG, MAX310X_EXTREG_DSBL);
+	regmap_read(s->regmap, s->if_cfg->rev_id_reg, &val);
+	s->if_cfg->extended_reg_enable(dev, false);
 	if (((val & MAX310x_REV_MASK) != MAX14830_REV_ID)) {
 		dev_err(dev,
 			"%s ID 0x%02x does not match\n", s->devtype->name, val);
@@ -419,6 +429,10 @@ static const struct max310x_devtype max3107_devtype = {
 	.mode1	= MAX310X_MODE1_AUTOSLEEP_BIT | MAX310X_MODE1_IRQSEL_BIT,
 	.detect	= max3107_detect,
 	.power	= max310x_power,
+	.slave_addr	= {
+		.min = 0x2c,
+		.max = 0x2f,
+	},
 };
 
 static const struct max310x_devtype max3108_devtype = {
@@ -427,6 +441,10 @@ static const struct max310x_devtype max3108_devtype = {
 	.mode1	= MAX310X_MODE1_AUTOSLEEP_BIT,
 	.detect	= max3108_detect,
 	.power	= max310x_power,
+	.slave_addr	= {
+		.min = 0x60,
+		.max = 0x6f,
+	},
 };
 
 static const struct max310x_devtype max3109_devtype = {
@@ -435,6 +453,10 @@ static const struct max310x_devtype max3109_devtype = {
 	.mode1	= MAX310X_MODE1_AUTOSLEEP_BIT,
 	.detect	= max3109_detect,
 	.power	= max310x_power,
+	.slave_addr	= {
+		.min = 0x60,
+		.max = 0x6f,
+	},
 };
 
 static const struct max310x_devtype max14830_devtype = {
@@ -443,11 +465,15 @@ static const struct max310x_devtype max14830_devtype = {
 	.mode1	= MAX310X_MODE1_IRQSEL_BIT,
 	.detect	= max14830_detect,
 	.power	= max14830_power,
+	.slave_addr	= {
+		.min = 0x60,
+		.max = 0x6f,
+	},
 };
 
 static bool max310x_reg_writeable(struct device *dev, unsigned int reg)
 {
-	switch (reg & 0x1f) {
+	switch (reg) {
 	case MAX310X_IRQSTS_REG:
 	case MAX310X_LSR_IRQSTS_REG:
 	case MAX310X_SPCHR_IRQSTS_REG:
@@ -464,7 +490,7 @@ static bool max310x_reg_writeable(struct device *dev, unsigned int reg)
 
 static bool max310x_reg_volatile(struct device *dev, unsigned int reg)
 {
-	switch (reg & 0x1f) {
+	switch (reg) {
 	case MAX310X_RHR_REG:
 	case MAX310X_IRQSTS_REG:
 	case MAX310X_LSR_IRQSTS_REG:
@@ -486,7 +512,7 @@ static bool max310x_reg_volatile(struct device *dev, unsigned int reg)
 
 static bool max310x_reg_precious(struct device *dev, unsigned int reg)
 {
-	switch (reg & 0x1f) {
+	switch (reg) {
 	case MAX310X_RHR_REG:
 	case MAX310X_IRQSTS_REG:
 	case MAX310X_SPCHR_IRQSTS_REG:
@@ -624,31 +650,15 @@ static u32 max310x_set_ref_clk(struct device *dev, struct max310x_port *s,
 static void max310x_batch_write(struct uart_port *port, u8 *txbuf, unsigned int len)
 {
 	struct max310x_one *one = to_max310x_port(port);
-	struct spi_transfer xfer[] = {
-		{
-			.tx_buf = &one->wr_header,
-			.len = sizeof(one->wr_header),
-		}, {
-			.tx_buf = txbuf,
-			.len = len,
-		}
-	};
-	spi_sync_transfer(to_spi_device(port->dev), xfer, ARRAY_SIZE(xfer));
+
+	regmap_raw_write(one->regmap, MAX310X_THR_REG, txbuf, len);
 }
 
 static void max310x_batch_read(struct uart_port *port, u8 *rxbuf, unsigned int len)
 {
 	struct max310x_one *one = to_max310x_port(port);
-	struct spi_transfer xfer[] = {
-		{
-			.tx_buf = &one->rd_header,
-			.len = sizeof(one->rd_header),
-		}, {
-			.rx_buf = rxbuf,
-			.len = len,
-		}
-	};
-	spi_sync_transfer(to_spi_device(port->dev), xfer, ARRAY_SIZE(xfer));
+
+	regmap_raw_read(one->regmap, MAX310X_RHR_REG, rxbuf, len);
 }
 
 static void max310x_handle_rx(struct uart_port *port, unsigned int rxlen)
@@ -1026,7 +1036,7 @@ static void max310x_rs_proc(struct work_struct *ws)
 			MAX310X_MODE2_ECHOSUPR_BIT, mode2);
 }
 
-static int max310x_rs485_config(struct uart_port *port,
+static int max310x_rs485_config(struct uart_port *port, struct ktermios *termios,
 				struct serial_rs485 *rs485)
 {
 	struct max310x_one *one = to_max310x_port(port);
@@ -1035,8 +1045,6 @@ static int max310x_rs485_config(struct uart_port *port,
 	    (rs485->delay_rts_after_send > 0x0f))
 		return -ERANGE;
 
-	rs485->flags &= SER_RS485_RTS_ON_SEND | SER_RS485_RX_DURING_TX |
-			SER_RS485_ENABLED;
 	port->rs485 = *rs485;
 
 	schedule_work(&one->rs_work);
@@ -1249,16 +1257,24 @@ static int max310x_gpio_set_config(struct gpio_chip *chip, unsigned int offset,
 }
 #endif
 
+static const struct serial_rs485 max310x_rs485_supported = {
+	.flags = SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND | SER_RS485_RX_DURING_TX,
+	.delay_rts_before_send = 1,
+	.delay_rts_after_send = 1,
+};
+
 static int max310x_probe(struct device *dev, const struct max310x_devtype *devtype,
-			 struct regmap *regmap, int irq)
+			 const struct max310x_if_cfg *if_cfg,
+			 struct regmap *regmaps[], int irq)
 {
 	int i, ret, fmin, fmax, freq;
 	struct max310x_port *s;
 	u32 uartclk = 0;
 	bool xtal;
 
-	if (IS_ERR(regmap))
-		return PTR_ERR(regmap);
+	for (i = 0; i < devtype->nr; i++)
+		if (IS_ERR(regmaps[i]))
+			return PTR_ERR(regmaps[i]);
 
 	/* Alloc port structure */
 	s = devm_kzalloc(dev, struct_size(s, p, devtype->nr), GFP_KERNEL);
@@ -1305,8 +1321,9 @@ static int max310x_probe(struct device *dev, const struct max310x_devtype *devty
 		goto out_clk;
 	}
 
-	s->regmap = regmap;
+	s->regmap = regmaps[0];
 	s->devtype = devtype;
+	s->if_cfg = if_cfg;
 	dev_set_drvdata(dev, s);
 
 	/* Check device to ensure we are talking to what we expect */
@@ -1315,22 +1332,18 @@ static int max310x_probe(struct device *dev, const struct max310x_devtype *devty
 		goto out_clk;
 
 	for (i = 0; i < devtype->nr; i++) {
-		unsigned int offs = i << 5;
-
 		/* Reset port */
-		regmap_write(s->regmap, MAX310X_MODE2_REG + offs,
+		regmap_write(regmaps[i], MAX310X_MODE2_REG,
 			     MAX310X_MODE2_RST_BIT);
 		/* Clear port reset */
-		regmap_write(s->regmap, MAX310X_MODE2_REG + offs, 0);
+		regmap_write(regmaps[i], MAX310X_MODE2_REG, 0);
 
 		/* Wait for port startup */
 		do {
-			regmap_read(s->regmap,
-				    MAX310X_BRGDIVLSB_REG + offs, &ret);
+			regmap_read(regmaps[i], MAX310X_BRGDIVLSB_REG, &ret);
 		} while (ret != 0x01);
 
-		regmap_write(s->regmap, MAX310X_MODE1_REG + offs,
-			     devtype->mode1);
+		regmap_write(regmaps[i], MAX310X_MODE1_REG, devtype->mode1);
 	}
 
 	uartclk = max310x_set_ref_clk(dev, s, freq, xtal);
@@ -1353,11 +1366,14 @@ static int max310x_probe(struct device *dev, const struct max310x_devtype *devty
 		s->p[i].port.fifosize	= MAX310X_FIFO_SIZE;
 		s->p[i].port.flags	= UPF_FIXED_TYPE | UPF_LOW_LATENCY;
 		s->p[i].port.iotype	= UPIO_PORT;
-		s->p[i].port.iobase	= i * 0x20;
+		s->p[i].port.iobase	= i;
 		s->p[i].port.membase	= (void __iomem *)~0;
 		s->p[i].port.uartclk	= uartclk;
 		s->p[i].port.rs485_config = max310x_rs485_config;
+		s->p[i].port.rs485_supported = max310x_rs485_supported;
 		s->p[i].port.ops	= &max310x_ops;
+		s->p[i].regmap		= regmaps[i];
+
 		/* Disable all interrupts */
 		max310x_port_write(&s->p[i].port, MAX310X_IRQEN_REG, 0);
 		/* Clear IRQ status register */
@@ -1368,10 +1384,6 @@ static int max310x_probe(struct device *dev, const struct max310x_devtype *devty
 		INIT_WORK(&s->p[i].md_work, max310x_md_proc);
 		/* Initialize queue for changing RS485 mode */
 		INIT_WORK(&s->p[i].rs_work, max310x_rs_proc);
-		/* Initialize SPI-transfer buffers */
-		s->p[i].wr_header = (s->p[i].port.iobase + MAX310X_THR_REG) |
-				    MAX310X_WRITE_BIT;
-		s->p[i].rd_header = (s->p[i].port.iobase + MAX310X_RHR_REG);
 
 		/* Register port */
 		ret = uart_add_one_port(&max310x_uart, &s->p[i].port);
@@ -1456,16 +1468,31 @@ static struct regmap_config regcfg = {
 	.val_bits = 8,
 	.write_flag_mask = MAX310X_WRITE_BIT,
 	.cache_type = REGCACHE_RBTREE,
+	.max_register = MAX310X_REG_1F,
 	.writeable_reg = max310x_reg_writeable,
 	.volatile_reg = max310x_reg_volatile,
 	.precious_reg = max310x_reg_precious,
 };
 
 #ifdef CONFIG_SPI_MASTER
+static int max310x_spi_extended_reg_enable(struct device *dev, bool enable)
+{
+	struct max310x_port *s = dev_get_drvdata(dev);
+
+	return regmap_write(s->regmap, MAX310X_GLOBALCMD_REG,
+			    enable ? MAX310X_EXTREG_ENBL : MAX310X_EXTREG_DSBL);
+}
+
+static const struct max310x_if_cfg __maybe_unused max310x_spi_if_cfg = {
+	.extended_reg_enable = max310x_spi_extended_reg_enable,
+	.rev_id_reg = MAX310X_SPI_REVID_EXTREG,
+};
+
 static int max310x_spi_probe(struct spi_device *spi)
 {
 	const struct max310x_devtype *devtype;
-	struct regmap *regmap;
+	struct regmap *regmaps[4];
+	unsigned int i;
 	int ret;
 
 	/* Setup SPI bus */
@@ -1480,10 +1507,14 @@ static int max310x_spi_probe(struct spi_device *spi)
 	if (!devtype)
 		devtype = (struct max310x_devtype *)spi_get_device_id(spi)->driver_data;
 
-	regcfg.max_register = devtype->nr * 0x20 - 1;
-	regmap = devm_regmap_init_spi(spi, &regcfg);
+	for (i = 0; i < devtype->nr; i++) {
+		u8 port_mask = i * 0x20;
+		regcfg.read_flag_mask = port_mask;
+		regcfg.write_flag_mask = port_mask | MAX310X_WRITE_BIT;
+		regmaps[i] = devm_regmap_init_spi(spi, &regcfg);
+	}
 
-	return max310x_probe(&spi->dev, devtype, regmap, spi->irq);
+	return max310x_probe(&spi->dev, devtype, &max310x_spi_if_cfg, regmaps, spi->irq);
 }
 
 static void max310x_spi_remove(struct spi_device *spi)
@@ -1512,6 +1543,97 @@ static struct spi_driver max310x_spi_driver = {
 };
 #endif
 
+#ifdef CONFIG_I2C
+static int max310x_i2c_extended_reg_enable(struct device *dev, bool enable)
+{
+	return 0;
+}
+
+static struct regmap_config regcfg_i2c = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.cache_type = REGCACHE_RBTREE,
+	.writeable_reg = max310x_reg_writeable,
+	.volatile_reg = max310x_reg_volatile,
+	.precious_reg = max310x_reg_precious,
+	.max_register = MAX310X_I2C_REVID_EXTREG,
+};
+
+static const struct max310x_if_cfg max310x_i2c_if_cfg = {
+	.extended_reg_enable = max310x_i2c_extended_reg_enable,
+	.rev_id_reg = MAX310X_I2C_REVID_EXTREG,
+};
+
+static unsigned short max310x_i2c_slave_addr(unsigned short addr,
+					     unsigned int nr)
+{
+	/*
+	 * For MAX14830 and MAX3109, the slave address depends on what the
+	 * A0 and A1 pins are tied to.
+	 * See Table I2C Address Map of the datasheet.
+	 * Based on that table, the following formulas were determined.
+	 * UART1 - UART0 = 0x10
+	 * UART2 - UART1 = 0x20 + 0x10
+	 * UART3 - UART2 = 0x10
+	 */
+
+	addr -= nr * 0x10;
+
+	if (nr >= 2)
+		addr -= 0x20;
+
+	return addr;
+}
+
+static int max310x_i2c_probe(struct i2c_client *client)
+{
+	const struct max310x_devtype *devtype =
+			device_get_match_data(&client->dev);
+	struct i2c_client *port_client;
+	struct regmap *regmaps[4];
+	unsigned int i;
+	u8 port_addr;
+
+	if (client->addr < devtype->slave_addr.min ||
+		client->addr > devtype->slave_addr.max)
+		return dev_err_probe(&client->dev, -EINVAL,
+				     "Slave addr 0x%x outside of range [0x%x, 0x%x]\n",
+				     client->addr, devtype->slave_addr.min,
+				     devtype->slave_addr.max);
+
+	regmaps[0] = devm_regmap_init_i2c(client, &regcfg_i2c);
+
+	for (i = 1; i < devtype->nr; i++) {
+		port_addr = max310x_i2c_slave_addr(client->addr, i);
+		port_client = devm_i2c_new_dummy_device(&client->dev,
+							client->adapter,
+							port_addr);
+
+		regmaps[i] = devm_regmap_init_i2c(port_client, &regcfg_i2c);
+	}
+
+	return max310x_probe(&client->dev, devtype, &max310x_i2c_if_cfg,
+			     regmaps, client->irq);
+}
+
+static int max310x_i2c_remove(struct i2c_client *client)
+{
+	max310x_remove(&client->dev);
+
+	return 0;
+}
+
+static struct i2c_driver max310x_i2c_driver = {
+	.driver = {
+		.name		= MAX310X_NAME,
+		.of_match_table	= max310x_dt_ids,
+		.pm		= &max310x_pm_ops,
+	},
+	.probe_new	= max310x_i2c_probe,
+	.remove		= max310x_i2c_remove,
+};
+#endif
+
 static int __init max310x_uart_init(void)
 {
 	int ret;
@@ -1525,15 +1647,35 @@ static int __init max310x_uart_init(void)
 #ifdef CONFIG_SPI_MASTER
 	ret = spi_register_driver(&max310x_spi_driver);
 	if (ret)
-		uart_unregister_driver(&max310x_uart);
+		goto err_spi_register;
 #endif
 
+#ifdef CONFIG_I2C
+	ret = i2c_add_driver(&max310x_i2c_driver);
+	if (ret)
+		goto err_i2c_register;
+#endif
+
+	return 0;
+
+#ifdef CONFIG_I2C
+err_i2c_register:
+	spi_unregister_driver(&max310x_spi_driver);
+#endif
+
+err_spi_register:
+	uart_unregister_driver(&max310x_uart);
+
 	return ret;
 }
 module_init(max310x_uart_init);
 
 static void __exit max310x_uart_exit(void)
 {
+#ifdef CONFIG_I2C
+	i2c_del_driver(&max310x_i2c_driver);
+#endif
+
 #ifdef CONFIG_SPI_MASTER
 	spi_unregister_driver(&max310x_spi_driver);
 #endif
diff --git a/drivers/tty/serial/mcf.c b/drivers/tty/serial/mcf.c
index 2aec62b..f4aaaad 100644
--- a/drivers/tty/serial/mcf.c
+++ b/drivers/tty/serial/mcf.c
@@ -431,7 +431,8 @@ static int mcf_verify_port(struct uart_port *port, struct serial_struct *ser)
 /****************************************************************************/
 
 /* Enable or disable the RS485 support */
-static int mcf_config_rs485(struct uart_port *port, struct serial_rs485 *rs485)
+static int mcf_config_rs485(struct uart_port *port, struct ktermios *termios,
+			    struct serial_rs485 *rs485)
 {
 	unsigned char mr1, mr2;
 
@@ -448,11 +449,14 @@ static int mcf_config_rs485(struct uart_port *port, struct serial_rs485 *rs485)
 	}
 	writeb(mr1, port->membase + MCFUART_UMR);
 	writeb(mr2, port->membase + MCFUART_UMR);
-	port->rs485 = *rs485;
 
 	return 0;
 }
 
+static const struct serial_rs485 mcf_rs485_supported = {
+	.flags = SER_RS485_ENABLED | SER_RS485_RTS_AFTER_SEND,
+};
+
 /****************************************************************************/
 
 /*
@@ -502,6 +506,7 @@ int __init early_mcf_setup(struct mcf_platform_uart *platp)
 		port->uartclk = MCF_BUSCLK;
 		port->flags = UPF_BOOT_AUTOCONF;
 		port->rs485_config = mcf_config_rs485;
+		port->rs485_supported = mcf_rs485_supported;
 		port->ops = &mcf_uart_ops;
 	}
 
@@ -629,6 +634,7 @@ static int mcf_probe(struct platform_device *pdev)
 		port->ops = &mcf_uart_ops;
 		port->flags = UPF_BOOT_AUTOCONF;
 		port->rs485_config = mcf_config_rs485;
+		port->rs485_supported = mcf_rs485_supported;
 		port->has_sysrq = IS_ENABLED(CONFIG_SERIAL_MCF_CONSOLE);
 
 		uart_add_one_port(&mcf_driver, port);
diff --git a/drivers/tty/serial/meson_uart.c b/drivers/tty/serial/meson_uart.c
index 4869c00..6c8db19 100644
--- a/drivers/tty/serial/meson_uart.c
+++ b/drivers/tty/serial/meson_uart.c
@@ -162,7 +162,7 @@ static void meson_uart_start_tx(struct uart_port *port)
 
 		ch = xmit->buf[xmit->tail];
 		writel(ch, port->membase + AML_UART_WFIFO);
-		xmit->tail = (xmit->tail+1) & (SERIAL_XMIT_SIZE - 1);
+		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
 		port->icount.tx++;
 	}
 
diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c
index e676ec7..3159889 100644
--- a/drivers/tty/serial/msm_serial.c
+++ b/drivers/tty/serial/msm_serial.c
@@ -29,103 +29,103 @@
 #include <linux/of_device.h>
 #include <linux/wait.h>
 
-#define UART_MR1			0x0000
+#define MSM_UART_MR1			0x0000
 
-#define UART_MR1_AUTO_RFR_LEVEL0	0x3F
-#define UART_MR1_AUTO_RFR_LEVEL1	0x3FF00
-#define UART_DM_MR1_AUTO_RFR_LEVEL1	0xFFFFFF00
-#define UART_MR1_RX_RDY_CTL		BIT(7)
-#define UART_MR1_CTS_CTL		BIT(6)
+#define MSM_UART_MR1_AUTO_RFR_LEVEL0	0x3F
+#define MSM_UART_MR1_AUTO_RFR_LEVEL1	0x3FF00
+#define MSM_UART_DM_MR1_AUTO_RFR_LEVEL1	0xFFFFFF00
+#define MSM_UART_MR1_RX_RDY_CTL		BIT(7)
+#define MSM_UART_MR1_CTS_CTL		BIT(6)
 
-#define UART_MR2			0x0004
-#define UART_MR2_ERROR_MODE		BIT(6)
-#define UART_MR2_BITS_PER_CHAR		0x30
-#define UART_MR2_BITS_PER_CHAR_5	(0x0 << 4)
-#define UART_MR2_BITS_PER_CHAR_6	(0x1 << 4)
-#define UART_MR2_BITS_PER_CHAR_7	(0x2 << 4)
-#define UART_MR2_BITS_PER_CHAR_8	(0x3 << 4)
-#define UART_MR2_STOP_BIT_LEN_ONE	(0x1 << 2)
-#define UART_MR2_STOP_BIT_LEN_TWO	(0x3 << 2)
-#define UART_MR2_PARITY_MODE_NONE	0x0
-#define UART_MR2_PARITY_MODE_ODD	0x1
-#define UART_MR2_PARITY_MODE_EVEN	0x2
-#define UART_MR2_PARITY_MODE_SPACE	0x3
-#define UART_MR2_PARITY_MODE		0x3
+#define MSM_UART_MR2			0x0004
+#define MSM_UART_MR2_ERROR_MODE		BIT(6)
+#define MSM_UART_MR2_BITS_PER_CHAR	0x30
+#define MSM_UART_MR2_BITS_PER_CHAR_5	(0x0 << 4)
+#define MSM_UART_MR2_BITS_PER_CHAR_6	(0x1 << 4)
+#define MSM_UART_MR2_BITS_PER_CHAR_7	(0x2 << 4)
+#define MSM_UART_MR2_BITS_PER_CHAR_8	(0x3 << 4)
+#define MSM_UART_MR2_STOP_BIT_LEN_ONE	(0x1 << 2)
+#define MSM_UART_MR2_STOP_BIT_LEN_TWO	(0x3 << 2)
+#define MSM_UART_MR2_PARITY_MODE_NONE	0x0
+#define MSM_UART_MR2_PARITY_MODE_ODD	0x1
+#define MSM_UART_MR2_PARITY_MODE_EVEN	0x2
+#define MSM_UART_MR2_PARITY_MODE_SPACE	0x3
+#define MSM_UART_MR2_PARITY_MODE	0x3
 
-#define UART_CSR			0x0008
+#define MSM_UART_CSR			0x0008
 
-#define UART_TF				0x000C
+#define MSM_UART_TF			0x000C
 #define UARTDM_TF			0x0070
 
-#define UART_CR				0x0010
-#define UART_CR_CMD_NULL		(0 << 4)
-#define UART_CR_CMD_RESET_RX		(1 << 4)
-#define UART_CR_CMD_RESET_TX		(2 << 4)
-#define UART_CR_CMD_RESET_ERR		(3 << 4)
-#define UART_CR_CMD_RESET_BREAK_INT	(4 << 4)
-#define UART_CR_CMD_START_BREAK		(5 << 4)
-#define UART_CR_CMD_STOP_BREAK		(6 << 4)
-#define UART_CR_CMD_RESET_CTS		(7 << 4)
-#define UART_CR_CMD_RESET_STALE_INT	(8 << 4)
-#define UART_CR_CMD_PACKET_MODE		(9 << 4)
-#define UART_CR_CMD_MODE_RESET		(12 << 4)
-#define UART_CR_CMD_SET_RFR		(13 << 4)
-#define UART_CR_CMD_RESET_RFR		(14 << 4)
-#define UART_CR_CMD_PROTECTION_EN	(16 << 4)
-#define UART_CR_CMD_STALE_EVENT_DISABLE	(6 << 8)
-#define UART_CR_CMD_STALE_EVENT_ENABLE	(80 << 4)
-#define UART_CR_CMD_FORCE_STALE		(4 << 8)
-#define UART_CR_CMD_RESET_TX_READY	(3 << 8)
-#define UART_CR_TX_DISABLE		BIT(3)
-#define UART_CR_TX_ENABLE		BIT(2)
-#define UART_CR_RX_DISABLE		BIT(1)
-#define UART_CR_RX_ENABLE		BIT(0)
-#define UART_CR_CMD_RESET_RXBREAK_START	((1 << 11) | (2 << 4))
+#define MSM_UART_CR				0x0010
+#define MSM_UART_CR_CMD_NULL			(0 << 4)
+#define MSM_UART_CR_CMD_RESET_RX		(1 << 4)
+#define MSM_UART_CR_CMD_RESET_TX		(2 << 4)
+#define MSM_UART_CR_CMD_RESET_ERR		(3 << 4)
+#define MSM_UART_CR_CMD_RESET_BREAK_INT		(4 << 4)
+#define MSM_UART_CR_CMD_START_BREAK		(5 << 4)
+#define MSM_UART_CR_CMD_STOP_BREAK		(6 << 4)
+#define MSM_UART_CR_CMD_RESET_CTS		(7 << 4)
+#define MSM_UART_CR_CMD_RESET_STALE_INT		(8 << 4)
+#define MSM_UART_CR_CMD_PACKET_MODE		(9 << 4)
+#define MSM_UART_CR_CMD_MODE_RESET		(12 << 4)
+#define MSM_UART_CR_CMD_SET_RFR			(13 << 4)
+#define MSM_UART_CR_CMD_RESET_RFR		(14 << 4)
+#define MSM_UART_CR_CMD_PROTECTION_EN		(16 << 4)
+#define MSM_UART_CR_CMD_STALE_EVENT_DISABLE	(6 << 8)
+#define MSM_UART_CR_CMD_STALE_EVENT_ENABLE	(80 << 4)
+#define MSM_UART_CR_CMD_FORCE_STALE		(4 << 8)
+#define MSM_UART_CR_CMD_RESET_TX_READY		(3 << 8)
+#define MSM_UART_CR_TX_DISABLE			BIT(3)
+#define MSM_UART_CR_TX_ENABLE			BIT(2)
+#define MSM_UART_CR_RX_DISABLE			BIT(1)
+#define MSM_UART_CR_RX_ENABLE			BIT(0)
+#define MSM_UART_CR_CMD_RESET_RXBREAK_START	((1 << 11) | (2 << 4))
 
-#define UART_IMR			0x0014
-#define UART_IMR_TXLEV			BIT(0)
-#define UART_IMR_RXSTALE		BIT(3)
-#define UART_IMR_RXLEV			BIT(4)
-#define UART_IMR_DELTA_CTS		BIT(5)
-#define UART_IMR_CURRENT_CTS		BIT(6)
-#define UART_IMR_RXBREAK_START		BIT(10)
+#define MSM_UART_IMR			0x0014
+#define MSM_UART_IMR_TXLEV		BIT(0)
+#define MSM_UART_IMR_RXSTALE		BIT(3)
+#define MSM_UART_IMR_RXLEV		BIT(4)
+#define MSM_UART_IMR_DELTA_CTS		BIT(5)
+#define MSM_UART_IMR_CURRENT_CTS	BIT(6)
+#define MSM_UART_IMR_RXBREAK_START	BIT(10)
 
-#define UART_IPR_RXSTALE_LAST		0x20
-#define UART_IPR_STALE_LSB		0x1F
-#define UART_IPR_STALE_TIMEOUT_MSB	0x3FF80
-#define UART_DM_IPR_STALE_TIMEOUT_MSB	0xFFFFFF80
+#define MSM_UART_IPR_RXSTALE_LAST		0x20
+#define MSM_UART_IPR_STALE_LSB			0x1F
+#define MSM_UART_IPR_STALE_TIMEOUT_MSB		0x3FF80
+#define MSM_UART_DM_IPR_STALE_TIMEOUT_MSB	0xFFFFFF80
 
-#define UART_IPR			0x0018
-#define UART_TFWR			0x001C
-#define UART_RFWR			0x0020
-#define UART_HCR			0x0024
+#define MSM_UART_IPR			0x0018
+#define MSM_UART_TFWR			0x001C
+#define MSM_UART_RFWR			0x0020
+#define MSM_UART_HCR			0x0024
 
-#define UART_MREG			0x0028
-#define UART_NREG			0x002C
-#define UART_DREG			0x0030
-#define UART_MNDREG			0x0034
-#define UART_IRDA			0x0038
-#define UART_MISR_MODE			0x0040
-#define UART_MISR_RESET			0x0044
-#define UART_MISR_EXPORT		0x0048
-#define UART_MISR_VAL			0x004C
-#define UART_TEST_CTRL			0x0050
+#define MSM_UART_MREG			0x0028
+#define MSM_UART_NREG			0x002C
+#define MSM_UART_DREG			0x0030
+#define MSM_UART_MNDREG			0x0034
+#define MSM_UART_IRDA			0x0038
+#define MSM_UART_MISR_MODE		0x0040
+#define MSM_UART_MISR_RESET		0x0044
+#define MSM_UART_MISR_EXPORT		0x0048
+#define MSM_UART_MISR_VAL		0x004C
+#define MSM_UART_TEST_CTRL		0x0050
 
-#define UART_SR				0x0008
-#define UART_SR_HUNT_CHAR		BIT(7)
-#define UART_SR_RX_BREAK		BIT(6)
-#define UART_SR_PAR_FRAME_ERR		BIT(5)
-#define UART_SR_OVERRUN			BIT(4)
-#define UART_SR_TX_EMPTY		BIT(3)
-#define UART_SR_TX_READY		BIT(2)
-#define UART_SR_RX_FULL			BIT(1)
-#define UART_SR_RX_READY		BIT(0)
+#define MSM_UART_SR			0x0008
+#define MSM_UART_SR_HUNT_CHAR		BIT(7)
+#define MSM_UART_SR_RX_BREAK		BIT(6)
+#define MSM_UART_SR_PAR_FRAME_ERR	BIT(5)
+#define MSM_UART_SR_OVERRUN		BIT(4)
+#define MSM_UART_SR_TX_EMPTY		BIT(3)
+#define MSM_UART_SR_TX_READY		BIT(2)
+#define MSM_UART_SR_RX_FULL		BIT(1)
+#define MSM_UART_SR_RX_READY		BIT(0)
 
-#define UART_RF				0x000C
+#define MSM_UART_RF			0x000C
 #define UARTDM_RF			0x0070
-#define UART_MISR			0x0010
-#define UART_ISR			0x0014
-#define UART_ISR_TX_READY		BIT(7)
+#define MSM_UART_MISR			0x0010
+#define MSM_UART_ISR			0x0014
+#define MSM_UART_ISR_TX_READY		BIT(7)
 
 #define UARTDM_RXFS			0x50
 #define UARTDM_RXFS_BUF_SHIFT		0x7
@@ -181,7 +181,10 @@ struct msm_port {
 	struct msm_dma		rx_dma;
 };
 
-#define UART_TO_MSM(uart_port)	container_of(uart_port, struct msm_port, uart)
+static inline struct msm_port *to_msm_port(struct uart_port *up)
+{
+	return container_of(up, struct msm_port, uart);
+}
 
 static
 void msm_write(struct uart_port *port, unsigned int val, unsigned int off)
@@ -200,10 +203,10 @@ unsigned int msm_read(struct uart_port *port, unsigned int off)
  */
 static void msm_serial_set_mnd_regs_tcxo(struct uart_port *port)
 {
-	msm_write(port, 0x06, UART_MREG);
-	msm_write(port, 0xF1, UART_NREG);
-	msm_write(port, 0x0F, UART_DREG);
-	msm_write(port, 0x1A, UART_MNDREG);
+	msm_write(port, 0x06, MSM_UART_MREG);
+	msm_write(port, 0xF1, MSM_UART_NREG);
+	msm_write(port, 0x0F, MSM_UART_DREG);
+	msm_write(port, 0x1A, MSM_UART_MNDREG);
 	port->uartclk = 1843200;
 }
 
@@ -212,16 +215,16 @@ static void msm_serial_set_mnd_regs_tcxo(struct uart_port *port)
  */
 static void msm_serial_set_mnd_regs_tcxoby4(struct uart_port *port)
 {
-	msm_write(port, 0x18, UART_MREG);
-	msm_write(port, 0xF6, UART_NREG);
-	msm_write(port, 0x0F, UART_DREG);
-	msm_write(port, 0x0A, UART_MNDREG);
+	msm_write(port, 0x18, MSM_UART_MREG);
+	msm_write(port, 0xF6, MSM_UART_NREG);
+	msm_write(port, 0x0F, MSM_UART_DREG);
+	msm_write(port, 0x0A, MSM_UART_MNDREG);
 	port->uartclk = 1843200;
 }
 
 static void msm_serial_set_mnd_regs(struct uart_port *port)
 {
-	struct msm_port *msm_port = UART_TO_MSM(port);
+	struct msm_port *msm_port = to_msm_port(port);
 
 	/*
 	 * These registers don't exist so we change the clk input rate
@@ -392,35 +395,35 @@ static inline void msm_wait_for_xmitr(struct uart_port *port)
 {
 	unsigned int timeout = 500000;
 
-	while (!(msm_read(port, UART_SR) & UART_SR_TX_EMPTY)) {
-		if (msm_read(port, UART_ISR) & UART_ISR_TX_READY)
+	while (!(msm_read(port, MSM_UART_SR) & MSM_UART_SR_TX_EMPTY)) {
+		if (msm_read(port, MSM_UART_ISR) & MSM_UART_ISR_TX_READY)
 			break;
 		udelay(1);
 		if (!timeout--)
 			break;
 	}
-	msm_write(port, UART_CR_CMD_RESET_TX_READY, UART_CR);
+	msm_write(port, MSM_UART_CR_CMD_RESET_TX_READY, MSM_UART_CR);
 }
 
 static void msm_stop_tx(struct uart_port *port)
 {
-	struct msm_port *msm_port = UART_TO_MSM(port);
+	struct msm_port *msm_port = to_msm_port(port);
 
-	msm_port->imr &= ~UART_IMR_TXLEV;
-	msm_write(port, msm_port->imr, UART_IMR);
+	msm_port->imr &= ~MSM_UART_IMR_TXLEV;
+	msm_write(port, msm_port->imr, MSM_UART_IMR);
 }
 
 static void msm_start_tx(struct uart_port *port)
 {
-	struct msm_port *msm_port = UART_TO_MSM(port);
+	struct msm_port *msm_port = to_msm_port(port);
 	struct msm_dma *dma = &msm_port->tx_dma;
 
 	/* Already started in DMA mode */
 	if (dma->count)
 		return;
 
-	msm_port->imr |= UART_IMR_TXLEV;
-	msm_write(port, msm_port->imr, UART_IMR);
+	msm_port->imr |= MSM_UART_IMR_TXLEV;
+	msm_write(port, msm_port->imr, MSM_UART_IMR);
 }
 
 static void msm_reset_dm_count(struct uart_port *port, int count)
@@ -456,8 +459,8 @@ static void msm_complete_tx_dma(void *args)
 	msm_write(port, val, UARTDM_DMEN);
 
 	if (msm_port->is_uartdm > UARTDM_1P3) {
-		msm_write(port, UART_CR_CMD_RESET_TX, UART_CR);
-		msm_write(port, UART_CR_TX_ENABLE, UART_CR);
+		msm_write(port, MSM_UART_CR_CMD_RESET_TX, MSM_UART_CR);
+		msm_write(port, MSM_UART_CR_TX_ENABLE, MSM_UART_CR);
 	}
 
 	count = dma->count - state.residue;
@@ -468,8 +471,8 @@ static void msm_complete_tx_dma(void *args)
 	xmit->tail &= UART_XMIT_SIZE - 1;
 
 	/* Restore "Tx FIFO below watermark" interrupt */
-	msm_port->imr |= UART_IMR_TXLEV;
-	msm_write(port, msm_port->imr, UART_IMR);
+	msm_port->imr |= MSM_UART_IMR_TXLEV;
+	msm_write(port, msm_port->imr, MSM_UART_IMR);
 
 	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
 		uart_write_wakeup(port);
@@ -516,8 +519,8 @@ static int msm_handle_tx_dma(struct msm_port *msm_port, unsigned int count)
 	 * Using DMA complete for Tx FIFO reload, no need for
 	 * "Tx FIFO below watermark" one, disable it
 	 */
-	msm_port->imr &= ~UART_IMR_TXLEV;
-	msm_write(port, msm_port->imr, UART_IMR);
+	msm_port->imr &= ~MSM_UART_IMR_TXLEV;
+	msm_write(port, msm_port->imr, MSM_UART_IMR);
 
 	dma->count = count;
 
@@ -559,10 +562,10 @@ static void msm_complete_rx_dma(void *args)
 	val &= ~dma->enable_bit;
 	msm_write(port, val, UARTDM_DMEN);
 
-	if (msm_read(port, UART_SR) & UART_SR_OVERRUN) {
+	if (msm_read(port, MSM_UART_SR) & MSM_UART_SR_OVERRUN) {
 		port->icount.overrun++;
 		tty_insert_flip_char(tport, 0, TTY_OVERRUN);
-		msm_write(port, UART_CR_CMD_RESET_ERR, UART_CR);
+		msm_write(port, MSM_UART_CR_CMD_RESET_ERR, MSM_UART_CR);
 	}
 
 	count = msm_read(port, UARTDM_RX_TOTAL_SNAP);
@@ -584,7 +587,7 @@ static void msm_complete_rx_dma(void *args)
 				continue;
 		}
 
-		if (!(port->read_status_mask & UART_SR_RX_BREAK))
+		if (!(port->read_status_mask & MSM_UART_SR_RX_BREAK))
 			flag = TTY_NORMAL;
 
 		spin_unlock_irqrestore(&port->lock, flags);
@@ -638,23 +641,23 @@ static void msm_start_rx_dma(struct msm_port *msm_port)
 	 * Using DMA for FIFO off-load, no need for "Rx FIFO over
 	 * watermark" or "stale" interrupts, disable them
 	 */
-	msm_port->imr &= ~(UART_IMR_RXLEV | UART_IMR_RXSTALE);
+	msm_port->imr &= ~(MSM_UART_IMR_RXLEV | MSM_UART_IMR_RXSTALE);
 
 	/*
 	 * Well, when DMA is ADM3 engine(implied by <= UARTDM v1.3),
 	 * we need RXSTALE to flush input DMA fifo to memory
 	 */
 	if (msm_port->is_uartdm < UARTDM_1P4)
-		msm_port->imr |= UART_IMR_RXSTALE;
+		msm_port->imr |= MSM_UART_IMR_RXSTALE;
 
-	msm_write(uart, msm_port->imr, UART_IMR);
+	msm_write(uart, msm_port->imr, MSM_UART_IMR);
 
 	dma->count = UARTDM_RX_SIZE;
 
 	dma_async_issue_pending(dma->chan);
 
-	msm_write(uart, UART_CR_CMD_RESET_STALE_INT, UART_CR);
-	msm_write(uart, UART_CR_CMD_STALE_EVENT_ENABLE, UART_CR);
+	msm_write(uart, MSM_UART_CR_CMD_RESET_STALE_INT, MSM_UART_CR);
+	msm_write(uart, MSM_UART_CR_CMD_STALE_EVENT_ENABLE, MSM_UART_CR);
 
 	val = msm_read(uart, UARTDM_DMEN);
 	val |= dma->enable_bit;
@@ -676,25 +679,25 @@ static void msm_start_rx_dma(struct msm_port *msm_port)
 	 * Switch from DMA to SW/FIFO mode. After clearing Rx BAM (UARTDM_DMEN),
 	 * receiver must be reset.
 	 */
-	msm_write(uart, UART_CR_CMD_RESET_RX, UART_CR);
-	msm_write(uart, UART_CR_RX_ENABLE, UART_CR);
+	msm_write(uart, MSM_UART_CR_CMD_RESET_RX, MSM_UART_CR);
+	msm_write(uart, MSM_UART_CR_RX_ENABLE, MSM_UART_CR);
 
-	msm_write(uart, UART_CR_CMD_RESET_STALE_INT, UART_CR);
+	msm_write(uart, MSM_UART_CR_CMD_RESET_STALE_INT, MSM_UART_CR);
 	msm_write(uart, 0xFFFFFF, UARTDM_DMRX);
-	msm_write(uart, UART_CR_CMD_STALE_EVENT_ENABLE, UART_CR);
+	msm_write(uart, MSM_UART_CR_CMD_STALE_EVENT_ENABLE, MSM_UART_CR);
 
 	/* Re-enable RX interrupts */
-	msm_port->imr |= (UART_IMR_RXLEV | UART_IMR_RXSTALE);
-	msm_write(uart, msm_port->imr, UART_IMR);
+	msm_port->imr |= MSM_UART_IMR_RXLEV | MSM_UART_IMR_RXSTALE;
+	msm_write(uart, msm_port->imr, MSM_UART_IMR);
 }
 
 static void msm_stop_rx(struct uart_port *port)
 {
-	struct msm_port *msm_port = UART_TO_MSM(port);
+	struct msm_port *msm_port = to_msm_port(port);
 	struct msm_dma *dma = &msm_port->rx_dma;
 
-	msm_port->imr &= ~(UART_IMR_RXLEV | UART_IMR_RXSTALE);
-	msm_write(port, msm_port->imr, UART_IMR);
+	msm_port->imr &= ~(MSM_UART_IMR_RXLEV | MSM_UART_IMR_RXSTALE);
+	msm_write(port, msm_port->imr, MSM_UART_IMR);
 
 	if (dma->chan)
 		msm_stop_dma(port, dma);
@@ -702,10 +705,10 @@ static void msm_stop_rx(struct uart_port *port)
 
 static void msm_enable_ms(struct uart_port *port)
 {
-	struct msm_port *msm_port = UART_TO_MSM(port);
+	struct msm_port *msm_port = to_msm_port(port);
 
-	msm_port->imr |= UART_IMR_DELTA_CTS;
-	msm_write(port, msm_port->imr, UART_IMR);
+	msm_port->imr |= MSM_UART_IMR_DELTA_CTS;
+	msm_write(port, msm_port->imr, MSM_UART_IMR);
 }
 
 static void msm_handle_rx_dm(struct uart_port *port, unsigned int misr)
@@ -714,20 +717,20 @@ static void msm_handle_rx_dm(struct uart_port *port, unsigned int misr)
 	struct tty_port *tport = &port->state->port;
 	unsigned int sr;
 	int count = 0;
-	struct msm_port *msm_port = UART_TO_MSM(port);
+	struct msm_port *msm_port = to_msm_port(port);
 
-	if ((msm_read(port, UART_SR) & UART_SR_OVERRUN)) {
+	if ((msm_read(port, MSM_UART_SR) & MSM_UART_SR_OVERRUN)) {
 		port->icount.overrun++;
 		tty_insert_flip_char(tport, 0, TTY_OVERRUN);
-		msm_write(port, UART_CR_CMD_RESET_ERR, UART_CR);
+		msm_write(port, MSM_UART_CR_CMD_RESET_ERR, MSM_UART_CR);
 	}
 
-	if (misr & UART_IMR_RXSTALE) {
+	if (misr & MSM_UART_IMR_RXSTALE) {
 		count = msm_read(port, UARTDM_RX_TOTAL_SNAP) -
 			msm_port->old_snap_state;
 		msm_port->old_snap_state = 0;
 	} else {
-		count = 4 * (msm_read(port, UART_RFWR));
+		count = 4 * (msm_read(port, MSM_UART_RFWR));
 		msm_port->old_snap_state += count;
 	}
 
@@ -739,8 +742,8 @@ static void msm_handle_rx_dm(struct uart_port *port, unsigned int misr)
 		unsigned char buf[4];
 		int sysrq, r_count, i;
 
-		sr = msm_read(port, UART_SR);
-		if ((sr & UART_SR_RX_READY) == 0) {
+		sr = msm_read(port, MSM_UART_SR);
+		if ((sr & MSM_UART_SR_RX_READY) == 0) {
 			msm_port->old_snap_state -= count;
 			break;
 		}
@@ -759,7 +762,7 @@ static void msm_handle_rx_dm(struct uart_port *port, unsigned int misr)
 					continue;
 			}
 
-			if (!(port->read_status_mask & UART_SR_RX_BREAK))
+			if (!(port->read_status_mask & MSM_UART_SR_RX_BREAK))
 				flag = TTY_NORMAL;
 
 			spin_unlock(&port->lock);
@@ -773,10 +776,10 @@ static void msm_handle_rx_dm(struct uart_port *port, unsigned int misr)
 
 	tty_flip_buffer_push(tport);
 
-	if (misr & (UART_IMR_RXSTALE))
-		msm_write(port, UART_CR_CMD_RESET_STALE_INT, UART_CR);
+	if (misr & (MSM_UART_IMR_RXSTALE))
+		msm_write(port, MSM_UART_CR_CMD_RESET_STALE_INT, MSM_UART_CR);
 	msm_write(port, 0xFFFFFF, UARTDM_DMRX);
-	msm_write(port, UART_CR_CMD_STALE_EVENT_ENABLE, UART_CR);
+	msm_write(port, MSM_UART_CR_CMD_STALE_EVENT_ENABLE, MSM_UART_CR);
 
 	/* Try to use DMA */
 	msm_start_rx_dma(msm_port);
@@ -792,25 +795,25 @@ static void msm_handle_rx(struct uart_port *port)
 	 * Handle overrun. My understanding of the hardware is that overrun
 	 * is not tied to the RX buffer, so we handle the case out of band.
 	 */
-	if ((msm_read(port, UART_SR) & UART_SR_OVERRUN)) {
+	if ((msm_read(port, MSM_UART_SR) & MSM_UART_SR_OVERRUN)) {
 		port->icount.overrun++;
 		tty_insert_flip_char(tport, 0, TTY_OVERRUN);
-		msm_write(port, UART_CR_CMD_RESET_ERR, UART_CR);
+		msm_write(port, MSM_UART_CR_CMD_RESET_ERR, MSM_UART_CR);
 	}
 
 	/* and now the main RX loop */
-	while ((sr = msm_read(port, UART_SR)) & UART_SR_RX_READY) {
+	while ((sr = msm_read(port, MSM_UART_SR)) & MSM_UART_SR_RX_READY) {
 		unsigned int c;
 		char flag = TTY_NORMAL;
 		int sysrq;
 
-		c = msm_read(port, UART_RF);
+		c = msm_read(port, MSM_UART_RF);
 
-		if (sr & UART_SR_RX_BREAK) {
+		if (sr & MSM_UART_SR_RX_BREAK) {
 			port->icount.brk++;
 			if (uart_handle_break(port))
 				continue;
-		} else if (sr & UART_SR_PAR_FRAME_ERR) {
+		} else if (sr & MSM_UART_SR_PAR_FRAME_ERR) {
 			port->icount.frame++;
 		} else {
 			port->icount.rx++;
@@ -819,9 +822,9 @@ static void msm_handle_rx(struct uart_port *port)
 		/* Mask conditions we're ignorning. */
 		sr &= port->read_status_mask;
 
-		if (sr & UART_SR_RX_BREAK)
+		if (sr & MSM_UART_SR_RX_BREAK)
 			flag = TTY_BREAK;
-		else if (sr & UART_SR_PAR_FRAME_ERR)
+		else if (sr & MSM_UART_SR_PAR_FRAME_ERR)
 			flag = TTY_FRAME;
 
 		spin_unlock(&port->lock);
@@ -837,7 +840,7 @@ static void msm_handle_rx(struct uart_port *port)
 static void msm_handle_tx_pio(struct uart_port *port, unsigned int tx_count)
 {
 	struct circ_buf *xmit = &port->state->xmit;
-	struct msm_port *msm_port = UART_TO_MSM(port);
+	struct msm_port *msm_port = to_msm_port(port);
 	unsigned int num_chars;
 	unsigned int tf_pointer = 0;
 	void __iomem *tf;
@@ -845,7 +848,7 @@ static void msm_handle_tx_pio(struct uart_port *port, unsigned int tx_count)
 	if (msm_port->is_uartdm)
 		tf = port->membase + UARTDM_TF;
 	else
-		tf = port->membase + UART_TF;
+		tf = port->membase + MSM_UART_TF;
 
 	if (tx_count && msm_port->is_uartdm)
 		msm_reset_dm_count(port, tx_count);
@@ -854,7 +857,7 @@ static void msm_handle_tx_pio(struct uart_port *port, unsigned int tx_count)
 		int i;
 		char buf[4] = { 0 };
 
-		if (!(msm_read(port, UART_SR) & UART_SR_TX_READY))
+		if (!(msm_read(port, MSM_UART_SR) & MSM_UART_SR_TX_READY))
 			break;
 
 		if (msm_port->is_uartdm)
@@ -883,7 +886,7 @@ static void msm_handle_tx_pio(struct uart_port *port, unsigned int tx_count)
 
 static void msm_handle_tx(struct uart_port *port)
 {
-	struct msm_port *msm_port = UART_TO_MSM(port);
+	struct msm_port *msm_port = to_msm_port(port);
 	struct circ_buf *xmit = &msm_port->uart.state->xmit;
 	struct msm_dma *dma = &msm_port->tx_dma;
 	unsigned int pio_count, dma_count, dma_min;
@@ -895,7 +898,7 @@ static void msm_handle_tx(struct uart_port *port)
 		if (msm_port->is_uartdm)
 			tf = port->membase + UARTDM_TF;
 		else
-			tf = port->membase + UART_TF;
+			tf = port->membase + MSM_UART_TF;
 
 		buf[0] = port->x_char;
 
@@ -939,7 +942,7 @@ static void msm_handle_tx(struct uart_port *port)
 
 static void msm_handle_delta_cts(struct uart_port *port)
 {
-	msm_write(port, UART_CR_CMD_RESET_CTS, UART_CR);
+	msm_write(port, MSM_UART_CR_CMD_RESET_CTS, MSM_UART_CR);
 	port->icount.cts++;
 	wake_up_interruptible(&port->state->port.delta_msr_wait);
 }
@@ -947,27 +950,27 @@ static void msm_handle_delta_cts(struct uart_port *port)
 static irqreturn_t msm_uart_irq(int irq, void *dev_id)
 {
 	struct uart_port *port = dev_id;
-	struct msm_port *msm_port = UART_TO_MSM(port);
+	struct msm_port *msm_port = to_msm_port(port);
 	struct msm_dma *dma = &msm_port->rx_dma;
 	unsigned long flags;
 	unsigned int misr;
 	u32 val;
 
 	spin_lock_irqsave(&port->lock, flags);
-	misr = msm_read(port, UART_MISR);
-	msm_write(port, 0, UART_IMR); /* disable interrupt */
+	misr = msm_read(port, MSM_UART_MISR);
+	msm_write(port, 0, MSM_UART_IMR); /* disable interrupt */
 
-	if (misr & UART_IMR_RXBREAK_START) {
+	if (misr & MSM_UART_IMR_RXBREAK_START) {
 		msm_port->break_detected = true;
-		msm_write(port, UART_CR_CMD_RESET_RXBREAK_START, UART_CR);
+		msm_write(port, MSM_UART_CR_CMD_RESET_RXBREAK_START, MSM_UART_CR);
 	}
 
-	if (misr & (UART_IMR_RXLEV | UART_IMR_RXSTALE)) {
+	if (misr & (MSM_UART_IMR_RXLEV | MSM_UART_IMR_RXSTALE)) {
 		if (dma->count) {
-			val = UART_CR_CMD_STALE_EVENT_DISABLE;
-			msm_write(port, val, UART_CR);
-			val = UART_CR_CMD_RESET_STALE_INT;
-			msm_write(port, val, UART_CR);
+			val = MSM_UART_CR_CMD_STALE_EVENT_DISABLE;
+			msm_write(port, val, MSM_UART_CR);
+			val = MSM_UART_CR_CMD_RESET_STALE_INT;
+			msm_write(port, val, MSM_UART_CR);
 			/*
 			 * Flush DMA input fifo to memory, this will also
 			 * trigger DMA RX completion
@@ -979,12 +982,12 @@ static irqreturn_t msm_uart_irq(int irq, void *dev_id)
 			msm_handle_rx(port);
 		}
 	}
-	if (misr & UART_IMR_TXLEV)
+	if (misr & MSM_UART_IMR_TXLEV)
 		msm_handle_tx(port);
-	if (misr & UART_IMR_DELTA_CTS)
+	if (misr & MSM_UART_IMR_DELTA_CTS)
 		msm_handle_delta_cts(port);
 
-	msm_write(port, msm_port->imr, UART_IMR); /* restore interrupt */
+	msm_write(port, msm_port->imr, MSM_UART_IMR); /* restore interrupt */
 	spin_unlock_irqrestore(&port->lock, flags);
 
 	return IRQ_HANDLED;
@@ -992,7 +995,7 @@ static irqreturn_t msm_uart_irq(int irq, void *dev_id)
 
 static unsigned int msm_tx_empty(struct uart_port *port)
 {
-	return (msm_read(port, UART_SR) & UART_SR_TX_EMPTY) ? TIOCSER_TEMT : 0;
+	return (msm_read(port, MSM_UART_SR) & MSM_UART_SR_TX_EMPTY) ? TIOCSER_TEMT : 0;
 }
 
 static unsigned int msm_get_mctrl(struct uart_port *port)
@@ -1002,19 +1005,19 @@ static unsigned int msm_get_mctrl(struct uart_port *port)
 
 static void msm_reset(struct uart_port *port)
 {
-	struct msm_port *msm_port = UART_TO_MSM(port);
+	struct msm_port *msm_port = to_msm_port(port);
 	unsigned int mr;
 
 	/* reset everything */
-	msm_write(port, UART_CR_CMD_RESET_RX, UART_CR);
-	msm_write(port, UART_CR_CMD_RESET_TX, UART_CR);
-	msm_write(port, UART_CR_CMD_RESET_ERR, UART_CR);
-	msm_write(port, UART_CR_CMD_RESET_BREAK_INT, UART_CR);
-	msm_write(port, UART_CR_CMD_RESET_CTS, UART_CR);
-	msm_write(port, UART_CR_CMD_RESET_RFR, UART_CR);
-	mr = msm_read(port, UART_MR1);
-	mr &= ~UART_MR1_RX_RDY_CTL;
-	msm_write(port, mr, UART_MR1);
+	msm_write(port, MSM_UART_CR_CMD_RESET_RX, MSM_UART_CR);
+	msm_write(port, MSM_UART_CR_CMD_RESET_TX, MSM_UART_CR);
+	msm_write(port, MSM_UART_CR_CMD_RESET_ERR, MSM_UART_CR);
+	msm_write(port, MSM_UART_CR_CMD_RESET_BREAK_INT, MSM_UART_CR);
+	msm_write(port, MSM_UART_CR_CMD_RESET_CTS, MSM_UART_CR);
+	msm_write(port, MSM_UART_CR_CMD_RESET_RFR, MSM_UART_CR);
+	mr = msm_read(port, MSM_UART_MR1);
+	mr &= ~MSM_UART_MR1_RX_RDY_CTL;
+	msm_write(port, mr, MSM_UART_MR1);
 
 	/* Disable DM modes */
 	if (msm_port->is_uartdm)
@@ -1025,24 +1028,24 @@ static void msm_set_mctrl(struct uart_port *port, unsigned int mctrl)
 {
 	unsigned int mr;
 
-	mr = msm_read(port, UART_MR1);
+	mr = msm_read(port, MSM_UART_MR1);
 
 	if (!(mctrl & TIOCM_RTS)) {
-		mr &= ~UART_MR1_RX_RDY_CTL;
-		msm_write(port, mr, UART_MR1);
-		msm_write(port, UART_CR_CMD_RESET_RFR, UART_CR);
+		mr &= ~MSM_UART_MR1_RX_RDY_CTL;
+		msm_write(port, mr, MSM_UART_MR1);
+		msm_write(port, MSM_UART_CR_CMD_RESET_RFR, MSM_UART_CR);
 	} else {
-		mr |= UART_MR1_RX_RDY_CTL;
-		msm_write(port, mr, UART_MR1);
+		mr |= MSM_UART_MR1_RX_RDY_CTL;
+		msm_write(port, mr, MSM_UART_MR1);
 	}
 }
 
 static void msm_break_ctl(struct uart_port *port, int break_ctl)
 {
 	if (break_ctl)
-		msm_write(port, UART_CR_CMD_START_BREAK, UART_CR);
+		msm_write(port, MSM_UART_CR_CMD_START_BREAK, MSM_UART_CR);
 	else
-		msm_write(port, UART_CR_CMD_STOP_BREAK, UART_CR);
+		msm_write(port, MSM_UART_CR_CMD_STOP_BREAK, MSM_UART_CR);
 }
 
 struct msm_baud_map {
@@ -1055,7 +1058,7 @@ static const struct msm_baud_map *
 msm_find_best_baud(struct uart_port *port, unsigned int baud,
 		   unsigned long *rate)
 {
-	struct msm_port *msm_port = UART_TO_MSM(port);
+	struct msm_port *msm_port = to_msm_port(port);
 	unsigned int divisor, result;
 	unsigned long target, old, best_rate = 0, diff, best_diff = ULONG_MAX;
 	const struct msm_baud_map *entry, *end, *best;
@@ -1124,7 +1127,7 @@ static int msm_set_baud_rate(struct uart_port *port, unsigned int baud,
 			     unsigned long *saved_flags)
 {
 	unsigned int rxstale, watermark, mask;
-	struct msm_port *msm_port = UART_TO_MSM(port);
+	struct msm_port *msm_port = to_msm_port(port);
 	const struct msm_baud_map *entry;
 	unsigned long flags, rate;
 
@@ -1139,45 +1142,45 @@ static int msm_set_baud_rate(struct uart_port *port, unsigned int baud,
 	*saved_flags = flags;
 	port->uartclk = rate;
 
-	msm_write(port, entry->code, UART_CSR);
+	msm_write(port, entry->code, MSM_UART_CSR);
 
 	/* RX stale watermark */
 	rxstale = entry->rxstale;
-	watermark = UART_IPR_STALE_LSB & rxstale;
+	watermark = MSM_UART_IPR_STALE_LSB & rxstale;
 	if (msm_port->is_uartdm) {
-		mask = UART_DM_IPR_STALE_TIMEOUT_MSB;
+		mask = MSM_UART_DM_IPR_STALE_TIMEOUT_MSB;
 	} else {
-		watermark |= UART_IPR_RXSTALE_LAST;
-		mask = UART_IPR_STALE_TIMEOUT_MSB;
+		watermark |= MSM_UART_IPR_RXSTALE_LAST;
+		mask = MSM_UART_IPR_STALE_TIMEOUT_MSB;
 	}
 
 	watermark |= mask & (rxstale << 2);
 
-	msm_write(port, watermark, UART_IPR);
+	msm_write(port, watermark, MSM_UART_IPR);
 
 	/* set RX watermark */
 	watermark = (port->fifosize * 3) / 4;
-	msm_write(port, watermark, UART_RFWR);
+	msm_write(port, watermark, MSM_UART_RFWR);
 
 	/* set TX watermark */
-	msm_write(port, 10, UART_TFWR);
+	msm_write(port, 10, MSM_UART_TFWR);
 
-	msm_write(port, UART_CR_CMD_PROTECTION_EN, UART_CR);
+	msm_write(port, MSM_UART_CR_CMD_PROTECTION_EN, MSM_UART_CR);
 	msm_reset(port);
 
 	/* Enable RX and TX */
-	msm_write(port, UART_CR_TX_ENABLE | UART_CR_RX_ENABLE, UART_CR);
+	msm_write(port, MSM_UART_CR_TX_ENABLE | MSM_UART_CR_RX_ENABLE, MSM_UART_CR);
 
 	/* turn on RX and CTS interrupts */
-	msm_port->imr = UART_IMR_RXLEV | UART_IMR_RXSTALE |
-			UART_IMR_CURRENT_CTS | UART_IMR_RXBREAK_START;
+	msm_port->imr = MSM_UART_IMR_RXLEV | MSM_UART_IMR_RXSTALE |
+			MSM_UART_IMR_CURRENT_CTS | MSM_UART_IMR_RXBREAK_START;
 
-	msm_write(port, msm_port->imr, UART_IMR);
+	msm_write(port, msm_port->imr, MSM_UART_IMR);
 
 	if (msm_port->is_uartdm) {
-		msm_write(port, UART_CR_CMD_RESET_STALE_INT, UART_CR);
+		msm_write(port, MSM_UART_CR_CMD_RESET_STALE_INT, MSM_UART_CR);
 		msm_write(port, 0xFFFFFF, UARTDM_DMRX);
-		msm_write(port, UART_CR_CMD_STALE_EVENT_ENABLE, UART_CR);
+		msm_write(port, MSM_UART_CR_CMD_STALE_EVENT_ENABLE, MSM_UART_CR);
 	}
 
 	return baud;
@@ -1185,7 +1188,7 @@ static int msm_set_baud_rate(struct uart_port *port, unsigned int baud,
 
 static void msm_init_clock(struct uart_port *port)
 {
-	struct msm_port *msm_port = UART_TO_MSM(port);
+	struct msm_port *msm_port = to_msm_port(port);
 
 	clk_prepare_enable(msm_port->clk);
 	clk_prepare_enable(msm_port->pclk);
@@ -1194,7 +1197,7 @@ static void msm_init_clock(struct uart_port *port)
 
 static int msm_startup(struct uart_port *port)
 {
-	struct msm_port *msm_port = UART_TO_MSM(port);
+	struct msm_port *msm_port = to_msm_port(port);
 	unsigned int data, rfr_level, mask;
 	int ret;
 
@@ -1209,18 +1212,18 @@ static int msm_startup(struct uart_port *port)
 		rfr_level = port->fifosize;
 
 	/* set automatic RFR level */
-	data = msm_read(port, UART_MR1);
+	data = msm_read(port, MSM_UART_MR1);
 
 	if (msm_port->is_uartdm)
-		mask = UART_DM_MR1_AUTO_RFR_LEVEL1;
+		mask = MSM_UART_DM_MR1_AUTO_RFR_LEVEL1;
 	else
-		mask = UART_MR1_AUTO_RFR_LEVEL1;
+		mask = MSM_UART_MR1_AUTO_RFR_LEVEL1;
 
 	data &= ~mask;
-	data &= ~UART_MR1_AUTO_RFR_LEVEL0;
+	data &= ~MSM_UART_MR1_AUTO_RFR_LEVEL0;
 	data |= mask & (rfr_level << 2);
-	data |= UART_MR1_AUTO_RFR_LEVEL0 & rfr_level;
-	msm_write(port, data, UART_MR1);
+	data |= MSM_UART_MR1_AUTO_RFR_LEVEL0 & rfr_level;
+	msm_write(port, data, MSM_UART_MR1);
 
 	if (msm_port->is_uartdm) {
 		msm_request_tx_dma(msm_port, msm_port->uart.mapbase);
@@ -1246,10 +1249,10 @@ static int msm_startup(struct uart_port *port)
 
 static void msm_shutdown(struct uart_port *port)
 {
-	struct msm_port *msm_port = UART_TO_MSM(port);
+	struct msm_port *msm_port = to_msm_port(port);
 
 	msm_port->imr = 0;
-	msm_write(port, 0, UART_IMR); /* disable interrupts */
+	msm_write(port, 0, MSM_UART_IMR); /* disable interrupts */
 
 	if (msm_port->is_uartdm)
 		msm_release_dma(msm_port);
@@ -1262,7 +1265,7 @@ static void msm_shutdown(struct uart_port *port)
 static void msm_set_termios(struct uart_port *port, struct ktermios *termios,
 			    struct ktermios *old)
 {
-	struct msm_port *msm_port = UART_TO_MSM(port);
+	struct msm_port *msm_port = to_msm_port(port);
 	struct msm_dma *dma = &msm_port->rx_dma;
 	unsigned long flags;
 	unsigned int baud, mr;
@@ -1279,60 +1282,60 @@ static void msm_set_termios(struct uart_port *port, struct ktermios *termios,
 		tty_termios_encode_baud_rate(termios, baud, baud);
 
 	/* calculate parity */
-	mr = msm_read(port, UART_MR2);
-	mr &= ~UART_MR2_PARITY_MODE;
+	mr = msm_read(port, MSM_UART_MR2);
+	mr &= ~MSM_UART_MR2_PARITY_MODE;
 	if (termios->c_cflag & PARENB) {
 		if (termios->c_cflag & PARODD)
-			mr |= UART_MR2_PARITY_MODE_ODD;
+			mr |= MSM_UART_MR2_PARITY_MODE_ODD;
 		else if (termios->c_cflag & CMSPAR)
-			mr |= UART_MR2_PARITY_MODE_SPACE;
+			mr |= MSM_UART_MR2_PARITY_MODE_SPACE;
 		else
-			mr |= UART_MR2_PARITY_MODE_EVEN;
+			mr |= MSM_UART_MR2_PARITY_MODE_EVEN;
 	}
 
 	/* calculate bits per char */
-	mr &= ~UART_MR2_BITS_PER_CHAR;
+	mr &= ~MSM_UART_MR2_BITS_PER_CHAR;
 	switch (termios->c_cflag & CSIZE) {
 	case CS5:
-		mr |= UART_MR2_BITS_PER_CHAR_5;
+		mr |= MSM_UART_MR2_BITS_PER_CHAR_5;
 		break;
 	case CS6:
-		mr |= UART_MR2_BITS_PER_CHAR_6;
+		mr |= MSM_UART_MR2_BITS_PER_CHAR_6;
 		break;
 	case CS7:
-		mr |= UART_MR2_BITS_PER_CHAR_7;
+		mr |= MSM_UART_MR2_BITS_PER_CHAR_7;
 		break;
 	case CS8:
 	default:
-		mr |= UART_MR2_BITS_PER_CHAR_8;
+		mr |= MSM_UART_MR2_BITS_PER_CHAR_8;
 		break;
 	}
 
 	/* calculate stop bits */
-	mr &= ~(UART_MR2_STOP_BIT_LEN_ONE | UART_MR2_STOP_BIT_LEN_TWO);
+	mr &= ~(MSM_UART_MR2_STOP_BIT_LEN_ONE | MSM_UART_MR2_STOP_BIT_LEN_TWO);
 	if (termios->c_cflag & CSTOPB)
-		mr |= UART_MR2_STOP_BIT_LEN_TWO;
+		mr |= MSM_UART_MR2_STOP_BIT_LEN_TWO;
 	else
-		mr |= UART_MR2_STOP_BIT_LEN_ONE;
+		mr |= MSM_UART_MR2_STOP_BIT_LEN_ONE;
 
 	/* set parity, bits per char, and stop bit */
-	msm_write(port, mr, UART_MR2);
+	msm_write(port, mr, MSM_UART_MR2);
 
 	/* calculate and set hardware flow control */
-	mr = msm_read(port, UART_MR1);
-	mr &= ~(UART_MR1_CTS_CTL | UART_MR1_RX_RDY_CTL);
+	mr = msm_read(port, MSM_UART_MR1);
+	mr &= ~(MSM_UART_MR1_CTS_CTL | MSM_UART_MR1_RX_RDY_CTL);
 	if (termios->c_cflag & CRTSCTS) {
-		mr |= UART_MR1_CTS_CTL;
-		mr |= UART_MR1_RX_RDY_CTL;
+		mr |= MSM_UART_MR1_CTS_CTL;
+		mr |= MSM_UART_MR1_RX_RDY_CTL;
 	}
-	msm_write(port, mr, UART_MR1);
+	msm_write(port, mr, MSM_UART_MR1);
 
 	/* Configure status bits to ignore based on termio flags. */
 	port->read_status_mask = 0;
 	if (termios->c_iflag & INPCK)
-		port->read_status_mask |= UART_SR_PAR_FRAME_ERR;
+		port->read_status_mask |= MSM_UART_SR_PAR_FRAME_ERR;
 	if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
-		port->read_status_mask |= UART_SR_RX_BREAK;
+		port->read_status_mask |= MSM_UART_SR_RX_BREAK;
 
 	uart_update_timeout(port, termios->c_cflag, baud);
 
@@ -1416,7 +1419,7 @@ static int msm_verify_port(struct uart_port *port, struct serial_struct *ser)
 static void msm_power(struct uart_port *port, unsigned int state,
 		      unsigned int oldstate)
 {
-	struct msm_port *msm_port = UART_TO_MSM(port);
+	struct msm_port *msm_port = to_msm_port(port);
 
 	switch (state) {
 	case 0:
@@ -1435,10 +1438,10 @@ static void msm_power(struct uart_port *port, unsigned int state,
 #ifdef CONFIG_CONSOLE_POLL
 static int msm_poll_get_char_single(struct uart_port *port)
 {
-	struct msm_port *msm_port = UART_TO_MSM(port);
-	unsigned int rf_reg = msm_port->is_uartdm ? UARTDM_RF : UART_RF;
+	struct msm_port *msm_port = to_msm_port(port);
+	unsigned int rf_reg = msm_port->is_uartdm ? UARTDM_RF : MSM_UART_RF;
 
-	if (!(msm_read(port, UART_SR) & UART_SR_RX_READY))
+	if (!(msm_read(port, MSM_UART_SR) & MSM_UART_SR_RX_READY))
 		return NO_POLL_CHAR;
 
 	return msm_read(port, rf_reg) & 0xff;
@@ -1456,7 +1459,7 @@ static int msm_poll_get_char_dm(struct uart_port *port)
 		c = sp[sizeof(slop) - count];
 		count--;
 	/* Or if FIFO is empty */
-	} else if (!(msm_read(port, UART_SR) & UART_SR_RX_READY)) {
+	} else if (!(msm_read(port, MSM_UART_SR) & MSM_UART_SR_RX_READY)) {
 		/*
 		 * If RX packing buffer has less than a word, force stale to
 		 * push contents into RX FIFO
@@ -1464,14 +1467,13 @@ static int msm_poll_get_char_dm(struct uart_port *port)
 		count = msm_read(port, UARTDM_RXFS);
 		count = (count >> UARTDM_RXFS_BUF_SHIFT) & UARTDM_RXFS_BUF_MASK;
 		if (count) {
-			msm_write(port, UART_CR_CMD_FORCE_STALE, UART_CR);
+			msm_write(port, MSM_UART_CR_CMD_FORCE_STALE, MSM_UART_CR);
 			slop = msm_read(port, UARTDM_RF);
 			c = sp[0];
 			count--;
-			msm_write(port, UART_CR_CMD_RESET_STALE_INT, UART_CR);
+			msm_write(port, MSM_UART_CR_CMD_RESET_STALE_INT, MSM_UART_CR);
 			msm_write(port, 0xFFFFFF, UARTDM_DMRX);
-			msm_write(port, UART_CR_CMD_STALE_EVENT_ENABLE,
-				  UART_CR);
+			msm_write(port, MSM_UART_CR_CMD_STALE_EVENT_ENABLE, MSM_UART_CR);
 		} else {
 			c = NO_POLL_CHAR;
 		}
@@ -1489,11 +1491,11 @@ static int msm_poll_get_char(struct uart_port *port)
 {
 	u32 imr;
 	int c;
-	struct msm_port *msm_port = UART_TO_MSM(port);
+	struct msm_port *msm_port = to_msm_port(port);
 
 	/* Disable all interrupts */
-	imr = msm_read(port, UART_IMR);
-	msm_write(port, 0, UART_IMR);
+	imr = msm_read(port, MSM_UART_IMR);
+	msm_write(port, 0, MSM_UART_IMR);
 
 	if (msm_port->is_uartdm)
 		c = msm_poll_get_char_dm(port);
@@ -1501,7 +1503,7 @@ static int msm_poll_get_char(struct uart_port *port)
 		c = msm_poll_get_char_single(port);
 
 	/* Enable interrupts */
-	msm_write(port, imr, UART_IMR);
+	msm_write(port, imr, MSM_UART_IMR);
 
 	return c;
 }
@@ -1509,28 +1511,28 @@ static int msm_poll_get_char(struct uart_port *port)
 static void msm_poll_put_char(struct uart_port *port, unsigned char c)
 {
 	u32 imr;
-	struct msm_port *msm_port = UART_TO_MSM(port);
+	struct msm_port *msm_port = to_msm_port(port);
 
 	/* Disable all interrupts */
-	imr = msm_read(port, UART_IMR);
-	msm_write(port, 0, UART_IMR);
+	imr = msm_read(port, MSM_UART_IMR);
+	msm_write(port, 0, MSM_UART_IMR);
 
 	if (msm_port->is_uartdm)
 		msm_reset_dm_count(port, 1);
 
 	/* Wait until FIFO is empty */
-	while (!(msm_read(port, UART_SR) & UART_SR_TX_READY))
+	while (!(msm_read(port, MSM_UART_SR) & MSM_UART_SR_TX_READY))
 		cpu_relax();
 
 	/* Write a character */
-	msm_write(port, c, msm_port->is_uartdm ? UARTDM_TF : UART_TF);
+	msm_write(port, c, msm_port->is_uartdm ? UARTDM_TF : MSM_UART_TF);
 
 	/* Wait until FIFO is empty */
-	while (!(msm_read(port, UART_SR) & UART_SR_TX_READY))
+	while (!(msm_read(port, MSM_UART_SR) & MSM_UART_SR_TX_READY))
 		cpu_relax();
 
 	/* Enable interrupts */
-	msm_write(port, imr, UART_IMR);
+	msm_write(port, imr, MSM_UART_IMR);
 }
 #endif
 
@@ -1588,7 +1590,7 @@ static struct msm_port msm_uart_ports[] = {
 	},
 };
 
-#define UART_NR	ARRAY_SIZE(msm_uart_ports)
+#define MSM_UART_NR	ARRAY_SIZE(msm_uart_ports)
 
 static inline struct uart_port *msm_get_port_from_line(unsigned int line)
 {
@@ -1609,7 +1611,7 @@ static void __msm_console_write(struct uart_port *port, const char *s,
 	if (is_uartdm)
 		tf = port->membase + UARTDM_TF;
 	else
-		tf = port->membase + UART_TF;
+		tf = port->membase + MSM_UART_TF;
 
 	/* Account for newlines that will get a carriage return added */
 	for (i = 0; i < count; i++)
@@ -1655,7 +1657,7 @@ static void __msm_console_write(struct uart_port *port, const char *s,
 			}
 		}
 
-		while (!(msm_read(port, UART_SR) & UART_SR_TX_READY))
+		while (!(msm_read(port, MSM_UART_SR) & MSM_UART_SR_TX_READY))
 			cpu_relax();
 
 		iowrite32_rep(tf, buf, 1);
@@ -1674,10 +1676,10 @@ static void msm_console_write(struct console *co, const char *s,
 	struct uart_port *port;
 	struct msm_port *msm_port;
 
-	BUG_ON(co->index < 0 || co->index >= UART_NR);
+	BUG_ON(co->index < 0 || co->index >= MSM_UART_NR);
 
 	port = msm_get_port_from_line(co->index);
-	msm_port = UART_TO_MSM(port);
+	msm_port = to_msm_port(port);
 
 	__msm_console_write(port, s, count, msm_port->is_uartdm);
 }
@@ -1690,7 +1692,7 @@ static int msm_console_setup(struct console *co, char *options)
 	int parity = 'n';
 	int flow = 'n';
 
-	if (unlikely(co->index >= UART_NR || co->index < 0))
+	if (unlikely(co->index >= MSM_UART_NR || co->index < 0))
 		return -ENXIO;
 
 	port = msm_get_port_from_line(co->index);
@@ -1771,7 +1773,7 @@ static struct uart_driver msm_uart_driver = {
 	.owner = THIS_MODULE,
 	.driver_name = "msm_serial",
 	.dev_name = "ttyMSM",
-	.nr = UART_NR,
+	.nr = MSM_UART_NR,
 	.cons = MSM_CONSOLE,
 };
 
@@ -1801,14 +1803,14 @@ static int msm_serial_probe(struct platform_device *pdev)
 	if (line < 0)
 		line = atomic_inc_return(&msm_uart_next_id) - 1;
 
-	if (unlikely(line < 0 || line >= UART_NR))
+	if (unlikely(line < 0 || line >= MSM_UART_NR))
 		return -ENXIO;
 
 	dev_info(&pdev->dev, "msm_serial: detected port #%d\n", line);
 
 	port = msm_get_port_from_line(line);
 	port->dev = &pdev->dev;
-	msm_port = UART_TO_MSM(port);
+	msm_port = to_msm_port(port);
 
 	id = of_match_device(msm_uartdm_table, &pdev->dev);
 	if (id)
diff --git a/drivers/tty/serial/mux.c b/drivers/tty/serial/mux.c
index 643dfbc..0ba0f4d 100644
--- a/drivers/tty/serial/mux.c
+++ b/drivers/tty/serial/mux.c
@@ -481,12 +481,6 @@ static int __init mux_probe(struct parisc_device *dev)
 		port->line	= port_cnt;
 		port->has_sysrq = IS_ENABLED(CONFIG_SERIAL_MUX_CONSOLE);
 
-		/* The port->timeout needs to match what is present in
-		 * uart_wait_until_sent in serial_core.c.  Otherwise
-		 * the time spent in msleep_interruptable will be very
-		 * long, causing the appearance of a console hang.
-		 */
-		port->timeout   = HZ / 50;
 		spin_lock_init(&port->lock);
 
 		status = uart_add_one_port(&mux_driver, port);
diff --git a/drivers/tty/serial/mvebu-uart.c b/drivers/tty/serial/mvebu-uart.c
index 93489fe..65eaecd 100644
--- a/drivers/tty/serial/mvebu-uart.c
+++ b/drivers/tty/serial/mvebu-uart.c
@@ -265,6 +265,7 @@ static void mvebu_uart_rx_chars(struct uart_port *port, unsigned int status)
 	struct tty_port *tport = &port->state->port;
 	unsigned char ch = 0;
 	char flag = 0;
+	int ret;
 
 	do {
 		if (status & STAT_RX_RDY(port)) {
@@ -277,6 +278,16 @@ static void mvebu_uart_rx_chars(struct uart_port *port, unsigned int status)
 				port->icount.parity++;
 		}
 
+		/*
+		 * For UART2, error bits are not cleared on buffer read.
+		 * This causes interrupt loop and system hang.
+		 */
+		if (IS_EXTENDED(port) && (status & STAT_BRK_ERR)) {
+			ret = readl(port->membase + UART_STAT);
+			ret |= STAT_BRK_ERR;
+			writel(ret, port->membase + UART_STAT);
+		}
+
 		if (status & STAT_BRK_DET) {
 			port->icount.brk++;
 			status &= ~(STAT_FRM_ERR | STAT_PAR_ERR);
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index 46f4d4c..0aa666e 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -19,6 +19,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/console.h>
+#include <linux/serial.h>
 #include <linux/serial_reg.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
@@ -1102,8 +1103,6 @@ serial_omap_type(struct uart_port *port)
 	return up->name;
 }
 
-#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
-
 static void __maybe_unused wait_for_xmitr(struct uart_omap_port *up)
 {
 	unsigned int status, tmout = 10000;
@@ -1118,7 +1117,7 @@ static void __maybe_unused wait_for_xmitr(struct uart_omap_port *up)
 		if (--tmout == 0)
 			break;
 		udelay(1);
-	} while ((status & BOTH_EMPTY) != BOTH_EMPTY);
+	} while (!uart_lsr_tx_empty(status));
 
 	/* Wait up to 1s for flow control if necessary */
 	if (up->port.flags & UPF_CONS_FLOW) {
@@ -1186,7 +1185,7 @@ static void omap_serial_early_putc(struct uart_port *port, unsigned char c)
 
 	for (;;) {
 		status = omap_serial_early_in(port, UART_LSR);
-		if ((status & BOTH_EMPTY) == BOTH_EMPTY)
+		if (uart_lsr_tx_empty(status))
 			break;
 		cpu_relax();
 	}
@@ -1325,7 +1324,8 @@ static inline void serial_omap_add_console_port(struct uart_omap_port *up)
 
 /* Enable or disable the rs485 support */
 static int
-serial_omap_config_rs485(struct uart_port *port, struct serial_rs485 *rs485)
+serial_omap_config_rs485(struct uart_port *port, struct ktermios *termios,
+			 struct serial_rs485 *rs485)
 {
 	struct uart_omap_port *up = to_uart_omap_port(port);
 	unsigned int mode;
@@ -1559,6 +1559,13 @@ static int serial_omap_probe_rs485(struct uart_omap_port *up,
 	return 0;
 }
 
+static const struct serial_rs485 serial_omap_rs485_supported = {
+	.flags = SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND | SER_RS485_RTS_AFTER_SEND |
+		 SER_RS485_RX_DURING_TX,
+	.delay_rts_before_send = 1,
+	.delay_rts_after_send = 1,
+};
+
 static int serial_omap_probe(struct platform_device *pdev)
 {
 	struct omap_uart_port_info *omap_up_info = dev_get_platdata(&pdev->dev);
@@ -1636,6 +1643,7 @@ static int serial_omap_probe(struct platform_device *pdev)
 	up->port.flags = omap_up_info->flags;
 	up->port.uartclk = omap_up_info->uartclk;
 	up->port.rs485_config = serial_omap_config_rs485;
+	up->port.rs485_supported = serial_omap_rs485_supported;
 	if (!up->port.uartclk) {
 		up->port.uartclk = DEFAULT_CLK_SPEED;
 		dev_warn(&pdev->dev,
diff --git a/drivers/tty/serial/owl-uart.c b/drivers/tty/serial/owl-uart.c
index 44d20e5..888e17e 100644
--- a/drivers/tty/serial/owl-uart.c
+++ b/drivers/tty/serial/owl-uart.c
@@ -201,7 +201,7 @@ static void owl_uart_send_chars(struct uart_port *port)
 
 		ch = xmit->buf[xmit->tail];
 		owl_uart_write(port, ch, OWL_UART_TXDAT);
-		xmit->tail = (xmit->tail + 1) & (SERIAL_XMIT_SIZE - 1);
+		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
 		port->icount.tx++;
 	}
 
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index 3b26524..8a9065e 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -3,6 +3,7 @@
  *Copyright (C) 2011 LAPIS Semiconductor Co., Ltd.
  */
 #include <linux/kernel.h>
+#include <linux/serial.h>
 #include <linux/serial_reg.h>
 #include <linux/slab.h>
 #include <linux/module.h>
@@ -189,8 +190,6 @@ enum {
 #define PCH_UART_HAL_LOOP		(PCH_UART_MCR_LOOP)
 #define PCH_UART_HAL_AFE		(PCH_UART_MCR_AFE)
 
-#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
-
 #define DEFAULT_UARTCLK   1843200 /*   1.8432 MHz */
 #define CMITC_UARTCLK   192000000 /* 192.0000 MHz */
 #define FRI2_64_UARTCLK  64000000 /*  64.0000 MHz */
@@ -1516,7 +1515,7 @@ static void pch_uart_put_poll_char(struct uart_port *port,
 	 * Finally, wait for transmitter to become empty
 	 * and restore the IER
 	 */
-	wait_for_xmitr(priv, BOTH_EMPTY);
+	wait_for_xmitr(priv, UART_LSR_BOTH_EMPTY);
 	iowrite8(ier, priv->membase + UART_IER);
 }
 #endif /* CONFIG_CONSOLE_POLL */
@@ -1602,7 +1601,7 @@ pch_console_write(struct console *co, const char *s, unsigned int count)
 	 *	Finally, wait for transmitter to become empty
 	 *	and restore the IER
 	 */
-	wait_for_xmitr(priv, BOTH_EMPTY);
+	wait_for_xmitr(priv, UART_LSR_BOTH_EMPTY);
 	iowrite8(ier, priv->membase + UART_IER);
 
 	if (port_locked)
diff --git a/drivers/tty/serial/pic32_uart.c b/drivers/tty/serial/pic32_uart.c
index b399aac..f418f1d 100644
--- a/drivers/tty/serial/pic32_uart.c
+++ b/drivers/tty/serial/pic32_uart.c
@@ -503,7 +503,7 @@ static int pic32_uart_startup(struct uart_port *port)
 	if (!sport->irq_fault_name) {
 		dev_err(port->dev, "%s: kasprintf err!", __func__);
 		ret = -ENOMEM;
-		goto out_done;
+		goto out_disable_clk;
 	}
 	irq_set_status_flags(sport->irq_fault, IRQ_NOAUTOEN);
 	ret = request_irq(sport->irq_fault, pic32_uart_fault_interrupt,
@@ -579,6 +579,8 @@ static int pic32_uart_startup(struct uart_port *port)
 out_f:
 	free_irq(sport->irq_fault, port);
 	kfree(sport->irq_fault_name);
+out_disable_clk:
+	clk_disable_unprepare(sport->clk);
 out_done:
 	return ret;
 }
diff --git a/drivers/tty/serial/pmac_zilog.c b/drivers/tty/serial/pmac_zilog.c
index 3133446..f63257b 100644
--- a/drivers/tty/serial/pmac_zilog.c
+++ b/drivers/tty/serial/pmac_zilog.c
@@ -52,7 +52,6 @@
 #ifdef CONFIG_PPC_PMAC
 #include <asm/machdep.h>
 #include <asm/pmac_feature.h>
-#include <asm/dbdma.h>
 #include <asm/macio.h>
 #else
 #include <linux/platform_device.h>
diff --git a/drivers/tty/serial/pxa.c b/drivers/tty/serial/pxa.c
index e80ba8e..9309ffd 100644
--- a/drivers/tty/serial/pxa.c
+++ b/drivers/tty/serial/pxa.c
@@ -23,6 +23,7 @@
 #include <linux/init.h>
 #include <linux/console.h>
 #include <linux/sysrq.h>
+#include <linux/serial.h>
 #include <linux/serial_reg.h>
 #include <linux/circ_buf.h>
 #include <linux/delay.h>
@@ -575,8 +576,6 @@ static struct uart_driver serial_pxa_reg;
 
 #ifdef CONFIG_SERIAL_PXA_CONSOLE
 
-#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
-
 /*
  *	Wait for transmitter & holding register to empty
  */
@@ -594,7 +593,7 @@ static void wait_for_xmitr(struct uart_pxa_port *up)
 		if (--tmout == 0)
 			break;
 		udelay(1);
-	} while ((status & BOTH_EMPTY) != BOTH_EMPTY);
+	} while (!uart_lsr_tx_empty(status));
 
 	/* Wait up to 1s for flow control if necessary */
 	if (up->port.flags & UPF_CONS_FLOW) {
diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
index 6f50a0b..f4698a0 100644
--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -943,52 +943,63 @@ static int qcom_geni_serial_startup(struct uart_port *uport)
 	return 0;
 }
 
+static unsigned long find_clk_rate_in_tol(struct clk *clk, unsigned int desired_clk,
+			unsigned int *clk_div, unsigned int percent_tol)
+{
+	unsigned long freq;
+	unsigned long div, maxdiv;
+	u64 mult;
+	unsigned long offset, abs_tol, achieved;
+
+	abs_tol = div_u64((u64)desired_clk * percent_tol, 100);
+	maxdiv = CLK_DIV_MSK >> CLK_DIV_SHFT;
+	div = 1;
+	while (div <= maxdiv) {
+		mult = (u64)div * desired_clk;
+		if (mult != (unsigned long)mult)
+			break;
+
+		offset = div * abs_tol;
+		freq = clk_round_rate(clk, mult - offset);
+
+		/* Can only get lower if we're done */
+		if (freq < mult - offset)
+			break;
+
+		/*
+		 * Re-calculate div in case rounding skipped rates but we
+		 * ended up at a good one, then check for a match.
+		 */
+		div = DIV_ROUND_CLOSEST(freq, desired_clk);
+		achieved = DIV_ROUND_CLOSEST(freq, div);
+		if (achieved <= desired_clk + abs_tol &&
+		    achieved >= desired_clk - abs_tol) {
+			*clk_div = div;
+			return freq;
+		}
+
+		div = DIV_ROUND_UP(freq, desired_clk);
+	}
+
+	return 0;
+}
+
 static unsigned long get_clk_div_rate(struct clk *clk, unsigned int baud,
 			unsigned int sampling_rate, unsigned int *clk_div)
 {
 	unsigned long ser_clk;
 	unsigned long desired_clk;
-	unsigned long freq, prev;
-	unsigned long div, maxdiv;
-	int64_t mult;
 
 	desired_clk = baud * sampling_rate;
-	if (!desired_clk) {
-		pr_err("%s: Invalid frequency\n", __func__);
+	if (!desired_clk)
 		return 0;
-	}
 
-	maxdiv = CLK_DIV_MSK >> CLK_DIV_SHFT;
-	prev = 0;
-
-	for (div = 1; div <= maxdiv; div++) {
-		mult = div * desired_clk;
-		if (mult > ULONG_MAX)
-			break;
-
-		freq = clk_round_rate(clk, (unsigned long)mult);
-		if (!(freq % desired_clk)) {
-			ser_clk = freq;
-			break;
-		}
-
-		if (!prev)
-			ser_clk = freq;
-		else if (prev == freq)
-			break;
-
-		prev = freq;
-	}
-
-	if (!ser_clk) {
-		pr_err("%s: Can't find matching DFS entry for baud %d\n",
-								__func__, baud);
-		return ser_clk;
-	}
-
-	*clk_div = ser_clk / desired_clk;
-	if (!(*clk_div))
-		*clk_div = 1;
+	/*
+	 * try to find a clock rate within 2% tolerance, then within 5%
+	 */
+	ser_clk = find_clk_rate_in_tol(clk, desired_clk, clk_div, 2);
+	if (!ser_clk)
+		ser_clk = find_clk_rate_in_tol(clk, desired_clk, clk_div, 5);
 
 	return ser_clk;
 }
@@ -1023,8 +1034,15 @@ static void qcom_geni_serial_set_termios(struct uart_port *uport,
 
 	clk_rate = get_clk_div_rate(port->se.clk, baud,
 		sampling_rate, &clk_div);
-	if (!clk_rate)
+	if (!clk_rate) {
+		dev_err(port->se.dev,
+			"Couldn't find suitable clock rate for %u\n",
+			baud * sampling_rate);
 		goto out_restart_rx;
+	}
+
+	dev_dbg(port->se.dev, "desired_rate-%u, clk_rate-%lu, clk_div-%u\n",
+			baud * sampling_rate, clk_rate, clk_div);
 
 	uport->uartclk = clk_rate;
 	dev_pm_opp_set_rate(uport->dev, clk_rate);
diff --git a/drivers/tty/serial/rda-uart.c b/drivers/tty/serial/rda-uart.c
index f556b49..feb2054 100644
--- a/drivers/tty/serial/rda-uart.c
+++ b/drivers/tty/serial/rda-uart.c
@@ -353,7 +353,7 @@ static void rda_uart_send_chars(struct uart_port *port)
 
 		ch = xmit->buf[xmit->tail];
 		rda_uart_write(port, ch, RDA_UART_RXTX_BUFFER);
-		xmit->tail = (xmit->tail + 1) & (SERIAL_XMIT_SIZE - 1);
+		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
 		port->icount.tx++;
 	}
 
diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c
index 1afe47b..b7a4b47 100644
--- a/drivers/tty/serial/samsung_tty.c
+++ b/drivers/tty/serial/samsung_tty.c
@@ -48,6 +48,12 @@
 #define S3C24XX_SERIAL_MAJOR	204
 #define S3C24XX_SERIAL_MINOR	64
 
+#ifdef CONFIG_ARM64
+#define UART_NR			12
+#else
+#define UART_NR			CONFIG_SERIAL_SAMSUNG_UARTS
+#endif
+
 #define S3C24XX_TX_PIO			1
 #define S3C24XX_TX_DMA			2
 #define S3C24XX_RX_PIO			1
@@ -87,7 +93,7 @@ struct s3c24xx_uart_info {
 struct s3c24xx_serial_drv_data {
 	const struct s3c24xx_uart_info	info;
 	const struct s3c2410_uartcfg	def_cfg;
-	const unsigned int		fifosize[CONFIG_SERIAL_SAMSUNG_UARTS];
+	const unsigned int		fifosize[UART_NR];
 };
 
 struct s3c24xx_uart_dma {
@@ -1011,6 +1017,7 @@ static unsigned int s3c24xx_serial_get_mctrl(struct uart_port *port)
 static void s3c24xx_serial_set_mctrl(struct uart_port *port, unsigned int mctrl)
 {
 	unsigned int umcon = rd_regl(port, S3C2410_UMCON);
+	unsigned int ucon = rd_regl(port, S3C2410_UCON);
 
 	if (mctrl & TIOCM_RTS)
 		umcon |= S3C2410_UMCOM_RTS_LOW;
@@ -1018,6 +1025,13 @@ static void s3c24xx_serial_set_mctrl(struct uart_port *port, unsigned int mctrl)
 		umcon &= ~S3C2410_UMCOM_RTS_LOW;
 
 	wr_regl(port, S3C2410_UMCON, umcon);
+
+	if (mctrl & TIOCM_LOOP)
+		ucon |= S3C2410_UCON_LOOPBACK;
+	else
+		ucon &= ~S3C2410_UCON_LOOPBACK;
+
+	wr_regl(port, S3C2410_UCON, ucon);
 }
 
 static void s3c24xx_serial_break_ctl(struct uart_port *port, int break_state)
@@ -1801,67 +1815,27 @@ static const struct uart_ops apple_s5l_serial_ops = {
 static struct uart_driver s3c24xx_uart_drv = {
 	.owner		= THIS_MODULE,
 	.driver_name	= "s3c2410_serial",
-	.nr		= CONFIG_SERIAL_SAMSUNG_UARTS,
+	.nr		= UART_NR,
 	.cons		= S3C24XX_SERIAL_CONSOLE,
 	.dev_name	= S3C24XX_SERIAL_NAME,
 	.major		= S3C24XX_SERIAL_MAJOR,
 	.minor		= S3C24XX_SERIAL_MINOR,
 };
 
-#define __PORT_LOCK_UNLOCKED(i) \
-	__SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[i].port.lock)
-static struct s3c24xx_uart_port
-s3c24xx_serial_ports[CONFIG_SERIAL_SAMSUNG_UARTS] = {
-	[0] = {
-		.port = {
-			.lock		= __PORT_LOCK_UNLOCKED(0),
-			.iotype		= UPIO_MEM,
-			.uartclk	= 0,
-			.fifosize	= 16,
-			.ops		= &s3c24xx_serial_ops,
-			.flags		= UPF_BOOT_AUTOCONF,
-			.line		= 0,
-		}
-	},
-	[1] = {
-		.port = {
-			.lock		= __PORT_LOCK_UNLOCKED(1),
-			.iotype		= UPIO_MEM,
-			.uartclk	= 0,
-			.fifosize	= 16,
-			.ops		= &s3c24xx_serial_ops,
-			.flags		= UPF_BOOT_AUTOCONF,
-			.line		= 1,
-		}
-	},
-#if CONFIG_SERIAL_SAMSUNG_UARTS > 2
-	[2] = {
-		.port = {
-			.lock		= __PORT_LOCK_UNLOCKED(2),
-			.iotype		= UPIO_MEM,
-			.uartclk	= 0,
-			.fifosize	= 16,
-			.ops		= &s3c24xx_serial_ops,
-			.flags		= UPF_BOOT_AUTOCONF,
-			.line		= 2,
-		}
-	},
-#endif
-#if CONFIG_SERIAL_SAMSUNG_UARTS > 3
-	[3] = {
-		.port = {
-			.lock		= __PORT_LOCK_UNLOCKED(3),
-			.iotype		= UPIO_MEM,
-			.uartclk	= 0,
-			.fifosize	= 16,
-			.ops		= &s3c24xx_serial_ops,
-			.flags		= UPF_BOOT_AUTOCONF,
-			.line		= 3,
-		}
-	}
-#endif
-};
-#undef __PORT_LOCK_UNLOCKED
+static struct s3c24xx_uart_port s3c24xx_serial_ports[UART_NR];
+
+static void s3c24xx_serial_init_port_default(int index) {
+	struct uart_port *port = &s3c24xx_serial_ports[index].port;
+
+	spin_lock_init(&port->lock);
+
+	port->iotype = UPIO_MEM;
+	port->uartclk = 0;
+	port->fifosize = 16;
+	port->ops = &s3c24xx_serial_ops;
+	port->flags = UPF_BOOT_AUTOCONF;
+	port->line = index;
+}
 
 /* s3c24xx_serial_resetport
  *
@@ -2177,6 +2151,8 @@ static int s3c24xx_serial_probe(struct platform_device *pdev)
 	}
 	ourport = &s3c24xx_serial_ports[index];
 
+	s3c24xx_serial_init_port_default(index);
+
 	ourport->drv_data = s3c24xx_get_driver_data(pdev);
 	if (!ourport->drv_data) {
 		dev_err(&pdev->dev, "could not find driver data\n");
@@ -2575,7 +2551,7 @@ s3c24xx_serial_console_setup(struct console *co, char *options)
 
 	/* is this a valid port */
 
-	if (co->index == -1 || co->index >= CONFIG_SERIAL_SAMSUNG_UARTS)
+	if (co->index == -1 || co->index >= UART_NR)
 		co->index = 0;
 
 	port = &s3c24xx_serial_ports[co->index].port;
diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
index 8472bf7..259e08c 100644
--- a/drivers/tty/serial/sc16is7xx.c
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -1127,7 +1127,7 @@ static void sc16is7xx_set_termios(struct uart_port *port,
 	spin_unlock_irqrestore(&port->lock, flags);
 }
 
-static int sc16is7xx_config_rs485(struct uart_port *port,
+static int sc16is7xx_config_rs485(struct uart_port *port, struct ktermios *termios,
 				  struct serial_rs485 *rs485)
 {
 	struct sc16is7xx_port *s = dev_get_drvdata(port->dev);
@@ -1143,7 +1143,6 @@ static int sc16is7xx_config_rs485(struct uart_port *port,
 			return -EINVAL;
 	}
 
-	port->rs485 = *rs485;
 	one->config.flags |= SC16IS7XX_RECONF_RS485;
 	kthread_queue_work(&s->kworker, &one->reg_work);
 
@@ -1354,6 +1353,12 @@ static int sc16is7xx_gpio_direction_output(struct gpio_chip *chip,
 }
 #endif
 
+static const struct serial_rs485 sc16is7xx_rs485_supported = {
+	.flags = SER_RS485_ENABLED | SER_RS485_RTS_AFTER_SEND,
+	.delay_rts_before_send = 1,
+	.delay_rts_after_send = 1,	/* Not supported but keep returning -EINVAL */
+};
+
 static int sc16is7xx_probe(struct device *dev,
 			   const struct sc16is7xx_devtype *devtype,
 			   struct regmap *regmap, int irq)
@@ -1456,6 +1461,7 @@ static int sc16is7xx_probe(struct device *dev,
 		s->p[i].port.iotype	= UPIO_PORT;
 		s->p[i].port.uartclk	= freq;
 		s->p[i].port.rs485_config = sc16is7xx_config_rs485;
+		s->p[i].port.rs485_supported = sc16is7xx_rs485_supported;
 		s->p[i].port.ops	= &sc16is7xx_ops;
 		s->p[i].old_mctrl	= 0;
 		s->p[i].port.line	= sc16is7xx_alloc_line();
diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c
index d942ab1..ad4f356 100644
--- a/drivers/tty/serial/serial-tegra.c
+++ b/drivers/tty/serial/serial-tegra.c
@@ -441,7 +441,7 @@ static char tegra_uart_decode_rx_error(struct tegra_uart_port *tup,
 
 	if (unlikely(lsr & TEGRA_UART_LSR_ANY)) {
 		if (lsr & UART_LSR_OE) {
-			/* Overrrun error */
+			/* Overrun error */
 			flag = TTY_OVERRUN;
 			tup->uport.icount.overrun++;
 			dev_dbg(tup->uport.dev, "Got overrun errors\n");
@@ -1080,7 +1080,7 @@ static int tegra_uart_hw_init(struct tegra_uart_port *tup)
 	tup->rx_in_progress = 1;
 
 	/*
-	 * Enable IE_RXS for the receive status interrupts like line errros.
+	 * Enable IE_RXS for the receive status interrupts like line errors.
 	 * Enable IE_RX_TIMEOUT to get the bytes which cannot be DMA'd.
 	 *
 	 * EORD is different interrupt than RX_TIMEOUT - RX_TIMEOUT occurs when
@@ -1667,6 +1667,7 @@ static int __init tegra_uart_init(void)
 	node = of_find_matching_node(NULL, tegra_uart_of_match);
 	if (node)
 		match = of_match_node(tegra_uart_of_match, node);
+	of_node_put(node);
 	if (match)
 		cdata = match->data;
 	if (cdata)
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 3dc926d..12c87cd 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -97,9 +97,16 @@ static inline struct uart_port *uart_port_check(struct uart_state *state)
 	return state->uart_port;
 }
 
-/*
- * This routine is used by the interrupt handler to schedule processing in
- * the software interrupt portion of the driver.
+/**
+ * uart_write_wakeup - schedule write processing
+ * @port: port to be processed
+ *
+ * This routine is used by the interrupt handler to schedule processing in the
+ * software interrupt portion of the driver. A driver is expected to call this
+ * function when the number of characters in the transmit buffer have dropped
+ * below a threshold.
+ *
+ * Locking: @port->lock should be held
  */
 void uart_write_wakeup(struct uart_port *port)
 {
@@ -327,13 +334,16 @@ static void uart_shutdown(struct tty_struct *tty, struct uart_state *state)
 }
 
 /**
- *	uart_update_timeout - update per-port FIFO timeout.
- *	@port:  uart_port structure describing the port
- *	@cflag: termios cflag value
- *	@baud:  speed of the port
+ * uart_update_timeout - update per-port frame timing information
+ * @port: uart_port structure describing the port
+ * @cflag: termios cflag value
+ * @baud: speed of the port
  *
- *	Set the port FIFO timeout value.  The @cflag value should
- *	reflect the actual hardware settings.
+ * Set the @port frame timing information from which the FIFO timeout value is
+ * derived. The @cflag value should reflect the actual hardware settings as
+ * number of bits, parity, stop bits and baud rate is taken into account here.
+ *
+ * Locking: caller is expected to take @port->lock
  */
 void
 uart_update_timeout(struct uart_port *port, unsigned int cflag,
@@ -343,35 +353,30 @@ uart_update_timeout(struct uart_port *port, unsigned int cflag,
 	u64 frame_time;
 
 	frame_time = (u64)size * NSEC_PER_SEC;
-	size *= port->fifosize;
-
-	/*
-	 * Figure the timeout to send the above number of bits.
-	 * Add .02 seconds of slop
-	 */
-	port->timeout = (HZ * size) / baud + HZ/50;
 	port->frame_time = DIV64_U64_ROUND_UP(frame_time, baud);
 }
 EXPORT_SYMBOL(uart_update_timeout);
 
 /**
- *	uart_get_baud_rate - return baud rate for a particular port
- *	@port: uart_port structure describing the port in question.
- *	@termios: desired termios settings.
- *	@old: old termios (or NULL)
- *	@min: minimum acceptable baud rate
- *	@max: maximum acceptable baud rate
+ * uart_get_baud_rate - return baud rate for a particular port
+ * @port: uart_port structure describing the port in question.
+ * @termios: desired termios settings
+ * @old: old termios (or %NULL)
+ * @min: minimum acceptable baud rate
+ * @max: maximum acceptable baud rate
  *
- *	Decode the termios structure into a numeric baud rate,
- *	taking account of the magic 38400 baud rate (with spd_*
- *	flags), and mapping the %B0 rate to 9600 baud.
+ * Decode the termios structure into a numeric baud rate, taking account of the
+ * magic 38400 baud rate (with spd_* flags), and mapping the %B0 rate to 9600
+ * baud.
  *
- *	If the new baud rate is invalid, try the old termios setting.
- *	If it's still invalid, we try 9600 baud.
+ * If the new baud rate is invalid, try the @old termios setting. If it's still
+ * invalid, we try 9600 baud.
  *
- *	Update the @termios structure to reflect the baud rate
- *	we're actually going to be using. Don't do this for the case
- *	where B0 is requested ("hang up").
+ * The @termios structure is updated to reflect the baud rate we're actually
+ * going to be using. Don't do this for the case where B0 is requested ("hang
+ * up").
+ *
+ * Locking: caller dependent
  */
 unsigned int
 uart_get_baud_rate(struct uart_port *port, struct ktermios *termios,
@@ -456,11 +461,17 @@ uart_get_baud_rate(struct uart_port *port, struct ktermios *termios,
 EXPORT_SYMBOL(uart_get_baud_rate);
 
 /**
- *	uart_get_divisor - return uart clock divisor
- *	@port: uart_port structure describing the port.
- *	@baud: desired baud rate
+ * uart_get_divisor - return uart clock divisor
+ * @port: uart_port structure describing the port
+ * @baud: desired baud rate
  *
- *	Calculate the uart clock divisor for the port.
+ * Calculate the divisor (baud_base / baud) for the specified @baud,
+ * appropriately rounded.
+ *
+ * If 38400 baud and custom divisor is selected, return the custom divisor
+ * instead.
+ *
+ * Locking: caller dependent
  */
 unsigned int
 uart_get_divisor(struct uart_port *port, unsigned int baud)
@@ -1023,10 +1034,10 @@ static int uart_set_info_user(struct tty_struct *tty, struct serial_struct *ss)
 }
 
 /**
- *	uart_get_lsr_info	-	get line status register info
- *	@tty: tty associated with the UART
- *	@state: UART being queried
- *	@value: returned modem value
+ * uart_get_lsr_info - get line status register info
+ * @tty: tty associated with the UART
+ * @state: UART being queried
+ * @value: returned modem value
  */
 static int uart_get_lsr_info(struct tty_struct *tty,
 			struct uart_state *state, unsigned int __user *value)
@@ -1276,6 +1287,126 @@ static int uart_get_icount(struct tty_struct *tty,
 	return 0;
 }
 
+#define SER_RS485_LEGACY_FLAGS	(SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND | \
+				 SER_RS485_RTS_AFTER_SEND | SER_RS485_RX_DURING_TX | \
+				 SER_RS485_TERMINATE_BUS)
+
+static int uart_check_rs485_flags(struct uart_port *port, struct serial_rs485 *rs485)
+{
+	u32 flags = rs485->flags;
+
+	/* Don't return -EINVAL for unsupported legacy flags */
+	flags &= ~SER_RS485_LEGACY_FLAGS;
+
+	/*
+	 * For any bit outside of the legacy ones that is not supported by
+	 * the driver, return -EINVAL.
+	 */
+	if (flags & ~port->rs485_supported.flags)
+		return -EINVAL;
+
+	/* Asking for address w/o addressing mode? */
+	if (!(rs485->flags & SER_RS485_ADDRB) &&
+	    (rs485->flags & (SER_RS485_ADDR_RECV|SER_RS485_ADDR_DEST)))
+		return -EINVAL;
+
+	/* Address given but not enabled? */
+	if (!(rs485->flags & SER_RS485_ADDR_RECV) && rs485->addr_recv)
+		return -EINVAL;
+	if (!(rs485->flags & SER_RS485_ADDR_DEST) && rs485->addr_dest)
+		return -EINVAL;
+
+	return 0;
+}
+
+static void uart_sanitize_serial_rs485_delays(struct uart_port *port,
+					      struct serial_rs485 *rs485)
+{
+	if (!port->rs485_supported.delay_rts_before_send) {
+		if (rs485->delay_rts_before_send) {
+			dev_warn_ratelimited(port->dev,
+				"%s (%d): RTS delay before sending not supported\n",
+				port->name, port->line);
+		}
+		rs485->delay_rts_before_send = 0;
+	} else if (rs485->delay_rts_before_send > RS485_MAX_RTS_DELAY) {
+		rs485->delay_rts_before_send = RS485_MAX_RTS_DELAY;
+		dev_warn_ratelimited(port->dev,
+			"%s (%d): RTS delay before sending clamped to %u ms\n",
+			port->name, port->line, rs485->delay_rts_before_send);
+	}
+
+	if (!port->rs485_supported.delay_rts_after_send) {
+		if (rs485->delay_rts_after_send) {
+			dev_warn_ratelimited(port->dev,
+				"%s (%d): RTS delay after sending not supported\n",
+				port->name, port->line);
+		}
+		rs485->delay_rts_after_send = 0;
+	} else if (rs485->delay_rts_after_send > RS485_MAX_RTS_DELAY) {
+		rs485->delay_rts_after_send = RS485_MAX_RTS_DELAY;
+		dev_warn_ratelimited(port->dev,
+			"%s (%d): RTS delay after sending clamped to %u ms\n",
+			port->name, port->line, rs485->delay_rts_after_send);
+	}
+}
+
+static void uart_sanitize_serial_rs485(struct uart_port *port, struct serial_rs485 *rs485)
+{
+	u32 supported_flags = port->rs485_supported.flags;
+
+	if (!(rs485->flags & SER_RS485_ENABLED)) {
+		memset(rs485, 0, sizeof(*rs485));
+		return;
+	}
+
+	/* Pick sane settings if the user hasn't */
+	if ((supported_flags & (SER_RS485_RTS_ON_SEND|SER_RS485_RTS_AFTER_SEND)) &&
+	    !(rs485->flags & SER_RS485_RTS_ON_SEND) ==
+	    !(rs485->flags & SER_RS485_RTS_AFTER_SEND)) {
+		dev_warn_ratelimited(port->dev,
+			"%s (%d): invalid RTS setting, using RTS_ON_SEND instead\n",
+			port->name, port->line);
+		rs485->flags |= SER_RS485_RTS_ON_SEND;
+		rs485->flags &= ~SER_RS485_RTS_AFTER_SEND;
+		supported_flags |= SER_RS485_RTS_ON_SEND|SER_RS485_RTS_AFTER_SEND;
+	}
+
+	rs485->flags &= supported_flags;
+
+	uart_sanitize_serial_rs485_delays(port, rs485);
+
+	/* Return clean padding area to userspace */
+	memset(rs485->padding0, 0, sizeof(rs485->padding0));
+	memset(rs485->padding1, 0, sizeof(rs485->padding1));
+}
+
+static void uart_set_rs485_termination(struct uart_port *port,
+				       const struct serial_rs485 *rs485)
+{
+	if (!(rs485->flags & SER_RS485_ENABLED))
+		return;
+
+	gpiod_set_value_cansleep(port->rs485_term_gpio,
+				 !!(rs485->flags & SER_RS485_TERMINATE_BUS));
+}
+
+int uart_rs485_config(struct uart_port *port)
+{
+	struct serial_rs485 *rs485 = &port->rs485;
+	int ret;
+
+	uart_sanitize_serial_rs485(port, rs485);
+	uart_set_rs485_termination(port, rs485);
+
+	ret = port->rs485_config(port, NULL, rs485);
+	if (ret)
+		memset(rs485, 0, sizeof(*rs485));
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(uart_rs485_config);
+
 static int uart_get_rs485_config(struct uart_port *port,
 			 struct serial_rs485 __user *rs485)
 {
@@ -1292,7 +1423,7 @@ static int uart_get_rs485_config(struct uart_port *port,
 	return 0;
 }
 
-static int uart_set_rs485_config(struct uart_port *port,
+static int uart_set_rs485_config(struct tty_struct *tty, struct uart_port *port,
 			 struct serial_rs485 __user *rs485_user)
 {
 	struct serial_rs485 rs485;
@@ -1305,34 +1436,14 @@ static int uart_set_rs485_config(struct uart_port *port,
 	if (copy_from_user(&rs485, rs485_user, sizeof(*rs485_user)))
 		return -EFAULT;
 
-	/* pick sane settings if the user hasn't */
-	if (!(rs485.flags & SER_RS485_RTS_ON_SEND) ==
-	    !(rs485.flags & SER_RS485_RTS_AFTER_SEND)) {
-		dev_warn_ratelimited(port->dev,
-			"%s (%d): invalid RTS setting, using RTS_ON_SEND instead\n",
-			port->name, port->line);
-		rs485.flags |= SER_RS485_RTS_ON_SEND;
-		rs485.flags &= ~SER_RS485_RTS_AFTER_SEND;
-	}
-
-	if (rs485.delay_rts_before_send > RS485_MAX_RTS_DELAY) {
-		rs485.delay_rts_before_send = RS485_MAX_RTS_DELAY;
-		dev_warn_ratelimited(port->dev,
-			"%s (%d): RTS delay before sending clamped to %u ms\n",
-			port->name, port->line, rs485.delay_rts_before_send);
-	}
-
-	if (rs485.delay_rts_after_send > RS485_MAX_RTS_DELAY) {
-		rs485.delay_rts_after_send = RS485_MAX_RTS_DELAY;
-		dev_warn_ratelimited(port->dev,
-			"%s (%d): RTS delay after sending clamped to %u ms\n",
-			port->name, port->line, rs485.delay_rts_after_send);
-	}
-	/* Return clean padding area to userspace */
-	memset(rs485.padding, 0, sizeof(rs485.padding));
+	ret = uart_check_rs485_flags(port, &rs485);
+	if (ret)
+		return ret;
+	uart_sanitize_serial_rs485(port, &rs485);
+	uart_set_rs485_termination(port, &rs485);
 
 	spin_lock_irqsave(&port->lock, flags);
-	ret = port->rs485_config(port, &rs485);
+	ret = port->rs485_config(port, &tty->termios, &rs485);
 	if (!ret)
 		port->rs485 = rs485;
 	spin_unlock_irqrestore(&port->lock, flags);
@@ -1441,6 +1552,10 @@ uart_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg)
 	if (ret != -ENOIOCTLCMD)
 		goto out;
 
+	/* rs485_config requires more locking than others */
+	if (cmd == TIOCGRS485)
+		down_write(&tty->termios_rwsem);
+
 	mutex_lock(&port->mutex);
 	uport = uart_port_check(state);
 
@@ -1464,7 +1579,7 @@ uart_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg)
 		break;
 
 	case TIOCSRS485:
-		ret = uart_set_rs485_config(uport, uarg);
+		ret = uart_set_rs485_config(tty, uport, uarg);
 		break;
 
 	case TIOCSISO7816:
@@ -1481,6 +1596,8 @@ uart_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg)
 	}
 out_up:
 	mutex_unlock(&port->mutex);
+	if (cmd == TIOCGRS485)
+		up_write(&tty->termios_rwsem);
 out:
 	return ret;
 }
@@ -1628,7 +1745,7 @@ static void uart_wait_until_sent(struct tty_struct *tty, int timeout)
 {
 	struct uart_state *state = tty->driver_data;
 	struct uart_port *port;
-	unsigned long char_time, expire;
+	unsigned long char_time, expire, fifo_timeout;
 
 	port = uart_port_ref(state);
 	if (!port)
@@ -1658,12 +1775,13 @@ static void uart_wait_until_sent(struct tty_struct *tty, int timeout)
 		 * amount of time to send the entire FIFO, it probably won't
 		 * ever clear.  This assumes the UART isn't doing flow
 		 * control, which is currently the case.  Hence, if it ever
-		 * takes longer than port->timeout, this is probably due to a
+		 * takes longer than FIFO timeout, this is probably due to a
 		 * UART bug of some kind.  So, we clamp the timeout parameter at
-		 * 2*port->timeout.
+		 * 2 * FIFO timeout.
 		 */
-		if (timeout == 0 || timeout > 2 * port->timeout)
-			timeout = 2 * port->timeout;
+		fifo_timeout = uart_fifo_timeout(port);
+		if (timeout == 0 || timeout > 2 * fifo_timeout)
+			timeout = 2 * fifo_timeout;
 	}
 
 	expire = jiffies + timeout;
@@ -1949,11 +2067,11 @@ static void uart_port_spin_lock_init(struct uart_port *port)
 
 #if defined(CONFIG_SERIAL_CORE_CONSOLE) || defined(CONFIG_CONSOLE_POLL)
 /**
- *	uart_console_write - write a console message to a serial port
- *	@port: the port to write the message
- *	@s: array of characters
- *	@count: number of characters in string to write
- *	@putchar: function to write character to port
+ * uart_console_write - write a console message to a serial port
+ * @port: the port to write the message
+ * @s: array of characters
+ * @count: number of characters in string to write
+ * @putchar: function to write character to port
  */
 void uart_console_write(struct uart_port *port, const char *s,
 			unsigned int count,
@@ -1969,10 +2087,15 @@ void uart_console_write(struct uart_port *port, const char *s,
 }
 EXPORT_SYMBOL_GPL(uart_console_write);
 
-/*
- *	Check whether an invalid uart number has been specified, and
- *	if so, search for the first available port that does have
- *	console support.
+/**
+ * uart_get_console - get uart port for console
+ * @ports: ports to search in
+ * @nr: number of @ports
+ * @co: console to search for
+ * Returns: uart_port for the console @co
+ *
+ * Check whether an invalid uart number has been specified (as @co->index), and
+ * if so, search for the first available port that does have console support.
  */
 struct uart_port * __init
 uart_get_console(struct uart_port *ports, int nr, struct console *co)
@@ -1992,24 +2115,23 @@ uart_get_console(struct uart_port *ports, int nr, struct console *co)
 }
 
 /**
- *	uart_parse_earlycon - Parse earlycon options
- *	@p:	  ptr to 2nd field (ie., just beyond '<name>,')
- *	@iotype:  ptr for decoded iotype (out)
- *	@addr:    ptr for decoded mapbase/iobase (out)
- *	@options: ptr for <options> field; NULL if not present (out)
+ * uart_parse_earlycon - Parse earlycon options
+ * @p:	     ptr to 2nd field (ie., just beyond '<name>,')
+ * @iotype:  ptr for decoded iotype (out)
+ * @addr:    ptr for decoded mapbase/iobase (out)
+ * @options: ptr for <options> field; %NULL if not present (out)
  *
- *	Decodes earlycon kernel command line parameters of the form
- *	   earlycon=<name>,io|mmio|mmio16|mmio32|mmio32be|mmio32native,<addr>,<options>
- *	   console=<name>,io|mmio|mmio16|mmio32|mmio32be|mmio32native,<addr>,<options>
+ * Decodes earlycon kernel command line parameters of the form:
+ *  * earlycon=<name>,io|mmio|mmio16|mmio32|mmio32be|mmio32native,<addr>,<options>
+ *  * console=<name>,io|mmio|mmio16|mmio32|mmio32be|mmio32native,<addr>,<options>
  *
- *	The optional form
+ * The optional form:
+ *  * earlycon=<name>,0x<addr>,<options>
+ *  * console=<name>,0x<addr>,<options>
  *
- *	   earlycon=<name>,0x<addr>,<options>
- *	   console=<name>,0x<addr>,<options>
+ * is also accepted; the returned @iotype will be %UPIO_MEM.
  *
- *	is also accepted; the returned @iotype will be UPIO_MEM.
- *
- *	Returns 0 on success or -EINVAL on failure
+ * Returns: 0 on success or -%EINVAL on failure
  */
 int uart_parse_earlycon(char *p, unsigned char *iotype, resource_size_t *addr,
 			char **options)
@@ -2054,16 +2176,16 @@ int uart_parse_earlycon(char *p, unsigned char *iotype, resource_size_t *addr,
 EXPORT_SYMBOL_GPL(uart_parse_earlycon);
 
 /**
- *	uart_parse_options - Parse serial port baud/parity/bits/flow control.
- *	@options: pointer to option string
- *	@baud: pointer to an 'int' variable for the baud rate.
- *	@parity: pointer to an 'int' variable for the parity.
- *	@bits: pointer to an 'int' variable for the number of data bits.
- *	@flow: pointer to an 'int' variable for the flow control character.
+ * uart_parse_options - Parse serial port baud/parity/bits/flow control.
+ * @options: pointer to option string
+ * @baud: pointer to an 'int' variable for the baud rate.
+ * @parity: pointer to an 'int' variable for the parity.
+ * @bits: pointer to an 'int' variable for the number of data bits.
+ * @flow: pointer to an 'int' variable for the flow control character.
  *
- *	uart_parse_options decodes a string containing the serial console
- *	options.  The format of the string is <baud><parity><bits><flow>,
- *	eg: 115200n8r
+ * uart_parse_options() decodes a string containing the serial console
+ * options. The format of the string is <baud><parity><bits><flow>,
+ * eg: 115200n8r
  */
 void
 uart_parse_options(const char *options, int *baud, int *parity,
@@ -2084,13 +2206,13 @@ uart_parse_options(const char *options, int *baud, int *parity,
 EXPORT_SYMBOL_GPL(uart_parse_options);
 
 /**
- *	uart_set_options - setup the serial console parameters
- *	@port: pointer to the serial ports uart_port structure
- *	@co: console pointer
- *	@baud: baud rate
- *	@parity: parity character - 'n' (none), 'o' (odd), 'e' (even)
- *	@bits: number of data bits
- *	@flow: flow control character - 'r' (rts)
+ * uart_set_options - setup the serial console parameters
+ * @port: pointer to the serial ports uart_port structure
+ * @co: console pointer
+ * @baud: baud rate
+ * @parity: parity character - 'n' (none), 'o' (odd), 'e' (even)
+ * @bits: number of data bits
+ * @flow: flow control character - 'r' (rts)
  */
 int
 uart_set_options(struct uart_port *port, struct console *co,
@@ -2577,17 +2699,19 @@ static const struct tty_port_operations uart_port_ops = {
 };
 
 /**
- *	uart_register_driver - register a driver with the uart core layer
- *	@drv: low level driver structure
+ * uart_register_driver - register a driver with the uart core layer
+ * @drv: low level driver structure
  *
- *	Register a uart driver with the core driver.  We in turn register
- *	with the tty layer, and initialise the core driver per-port state.
+ * Register a uart driver with the core driver. We in turn register with the
+ * tty layer, and initialise the core driver per-port state.
  *
- *	We have a proc file in /proc/tty/driver which is named after the
- *	normal driver.
+ * We have a proc file in /proc/tty/driver which is named after the normal
+ * driver.
  *
- *	drv->port should be NULL, and the per-port structures should be
- *	registered using uart_add_one_port after this call has succeeded.
+ * @drv->port should be %NULL, and the per-port structures should be registered
+ * using uart_add_one_port() after this call has succeeded.
+ *
+ * Locking: none, Interrupts: enabled
  */
 int uart_register_driver(struct uart_driver *drv)
 {
@@ -2651,13 +2775,14 @@ int uart_register_driver(struct uart_driver *drv)
 EXPORT_SYMBOL(uart_register_driver);
 
 /**
- *	uart_unregister_driver - remove a driver from the uart core layer
- *	@drv: low level driver structure
+ * uart_unregister_driver - remove a driver from the uart core layer
+ * @drv: low level driver structure
  *
- *	Remove all references to a driver from the core driver.  The low
- *	level driver must have removed all its ports via the
- *	uart_remove_one_port() if it registered them with uart_add_one_port().
- *	(ie, drv->port == NULL)
+ * Remove all references to a driver from the core driver. The low level
+ * driver must have removed all its ports via the uart_remove_one_port() if it
+ * registered them with uart_add_one_port(). (I.e. @drv->port is %NULL.)
+ *
+ * Locking: none, Interrupts: enabled
  */
 void uart_unregister_driver(struct uart_driver *drv)
 {
@@ -2906,16 +3031,15 @@ static const struct attribute_group tty_dev_attr_group = {
 };
 
 /**
- *	uart_add_one_port - attach a driver-defined port structure
- *	@drv: pointer to the uart low level driver structure for this port
- *	@uport: uart port structure to use for this port.
+ * uart_add_one_port - attach a driver-defined port structure
+ * @drv: pointer to the uart low level driver structure for this port
+ * @uport: uart port structure to use for this port.
  *
- *	Context: task context, might sleep
+ * Context: task context, might sleep
  *
- *	This allows the driver to register its own uart_port structure
- *	with the core driver.  The main purpose is to allow the low
- *	level uart drivers to expand uart_port, rather than having yet
- *	more levels of structures.
+ * This allows the driver @drv to register its own uart_port structure with the
+ * core driver. The main purpose is to allow the low level uart drivers to
+ * expand uart_port, rather than having yet more levels of structures.
  */
 int uart_add_one_port(struct uart_driver *drv, struct uart_port *uport)
 {
@@ -3010,15 +3134,14 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *uport)
 EXPORT_SYMBOL(uart_add_one_port);
 
 /**
- *	uart_remove_one_port - detach a driver defined port structure
- *	@drv: pointer to the uart low level driver structure for this port
- *	@uport: uart port structure for this port
+ * uart_remove_one_port - detach a driver defined port structure
+ * @drv: pointer to the uart low level driver structure for this port
+ * @uport: uart port structure for this port
  *
- *	Context: task context, might sleep
+ * Context: task context, might sleep
  *
- *	This unhooks (and hangs up) the specified port structure from the
- *	core driver.  No further calls will be made to the low-level code
- *	for this port.
+ * This unhooks (and hangs up) the specified port structure from the core
+ * driver. No further calls will be made to the low-level code for this port.
  */
 int uart_remove_one_port(struct uart_driver *drv, struct uart_port *uport)
 {
@@ -3090,8 +3213,13 @@ int uart_remove_one_port(struct uart_driver *drv, struct uart_port *uport)
 }
 EXPORT_SYMBOL(uart_remove_one_port);
 
-/*
- *	Are the two ports equivalent?
+/**
+ * uart_match_port - are the two ports equivalent?
+ * @port1: first port
+ * @port2: second port
+ *
+ * This utility function can be used to determine whether two uart_port
+ * structures describe the same port.
  */
 bool uart_match_port(const struct uart_port *port1,
 		const struct uart_port *port2)
@@ -3119,11 +3247,11 @@ bool uart_match_port(const struct uart_port *port1,
 EXPORT_SYMBOL(uart_match_port);
 
 /**
- *	uart_handle_dcd_change - handle a change of carrier detect state
- *	@uport: uart_port structure for the open port
- *	@status: new carrier detect status, nonzero if active
+ * uart_handle_dcd_change - handle a change of carrier detect state
+ * @uport: uart_port structure for the open port
+ * @status: new carrier detect status, nonzero if active
  *
- *	Caller must hold uport->lock
+ * Caller must hold uport->lock.
  */
 void uart_handle_dcd_change(struct uart_port *uport, unsigned int status)
 {
@@ -3154,11 +3282,11 @@ void uart_handle_dcd_change(struct uart_port *uport, unsigned int status)
 EXPORT_SYMBOL_GPL(uart_handle_dcd_change);
 
 /**
- *	uart_handle_cts_change - handle a change of clear-to-send state
- *	@uport: uart_port structure for the open port
- *	@status: new clear to send status, nonzero if active
+ * uart_handle_cts_change - handle a change of clear-to-send state
+ * @uport: uart_port structure for the open port
+ * @status: new clear to send status, nonzero if active
  *
- *	Caller must hold uport->lock
+ * Caller must hold uport->lock.
  */
 void uart_handle_cts_change(struct uart_port *uport, unsigned int status)
 {
@@ -3229,15 +3357,15 @@ static void uart_sysrq_on(struct work_struct *w)
 static DECLARE_WORK(sysrq_enable_work, uart_sysrq_on);
 
 /**
- *	uart_try_toggle_sysrq - Enables SysRq from serial line
- *	@port: uart_port structure where char(s) after BREAK met
- *	@ch: new character in the sequence after received BREAK
+ * uart_try_toggle_sysrq - Enables SysRq from serial line
+ * @port: uart_port structure where char(s) after BREAK met
+ * @ch: new character in the sequence after received BREAK
  *
- *	Enables magic SysRq when the required sequence is met on port
- *	(see CONFIG_MAGIC_SYSRQ_SERIAL_SEQUENCE).
+ * Enables magic SysRq when the required sequence is met on port
+ * (see CONFIG_MAGIC_SYSRQ_SERIAL_SEQUENCE).
  *
- *	Returns false if @ch is out of enabling sequence and should be
- *	handled some other way, true if @ch was consumed.
+ * Returns: %false if @ch is out of enabling sequence and should be
+ * handled some other way, %true if @ch was consumed.
  */
 bool uart_try_toggle_sysrq(struct uart_port *port, unsigned int ch)
 {
@@ -3289,6 +3417,8 @@ int uart_get_rs485_mode(struct uart_port *port)
 		rs485conf->delay_rts_after_send = 0;
 	}
 
+	uart_sanitize_serial_rs485_delays(port, rs485conf);
+
 	/*
 	 * Clear full-duplex and enabled flags, set RTS polarity to active high
 	 * to get to a defined state with the following properties:
@@ -3321,10 +3451,20 @@ int uart_get_rs485_mode(struct uart_port *port)
 		port->rs485_term_gpio = NULL;
 		return dev_err_probe(dev, ret, "Cannot get rs485-term-gpios\n");
 	}
+	if (port->rs485_term_gpio)
+		port->rs485_supported.flags |= SER_RS485_TERMINATE_BUS;
 
 	return 0;
 }
 EXPORT_SYMBOL_GPL(uart_get_rs485_mode);
 
+/* Compile-time assertions for serial_rs485 layout */
+static_assert(offsetof(struct serial_rs485, padding) ==
+              (offsetof(struct serial_rs485, delay_rts_after_send) + sizeof(__u32)));
+static_assert(offsetof(struct serial_rs485, padding1) ==
+	      offsetof(struct serial_rs485, padding[1]));
+static_assert((offsetof(struct serial_rs485, padding[4]) + sizeof(__u32)) ==
+	      sizeof(struct serial_rs485));
+
 MODULE_DESCRIPTION("Serial driver core");
 MODULE_LICENSE("GPL");
diff --git a/drivers/tty/serial/serial_mctrl_gpio.c b/drivers/tty/serial/serial_mctrl_gpio.c
index 1663b3afc..7d5aaa8 100644
--- a/drivers/tty/serial/serial_mctrl_gpio.c
+++ b/drivers/tty/serial/serial_mctrl_gpio.c
@@ -42,6 +42,13 @@ static bool mctrl_gpio_flags_is_dir_out(unsigned int idx)
 	return mctrl_gpios_desc[idx].flags & GPIOD_FLAGS_BIT_DIR_OUT;
 }
 
+/**
+ * mctrl_gpio_set - set gpios according to mctrl state
+ * @gpios: gpios to set
+ * @mctrl: state to set
+ *
+ * Set the gpios according to the mctrl state.
+ */
 void mctrl_gpio_set(struct mctrl_gpios *gpios, unsigned int mctrl)
 {
 	enum mctrl_gpio_idx i;
@@ -63,6 +70,12 @@ void mctrl_gpio_set(struct mctrl_gpios *gpios, unsigned int mctrl)
 }
 EXPORT_SYMBOL_GPL(mctrl_gpio_set);
 
+/**
+ * mctrl_gpio_to_gpiod - obtain gpio_desc of modem line index
+ * @gpios: gpios to look into
+ * @gidx: index of the modem line
+ * Returns: the gpio_desc structure associated to the modem line index
+ */
 struct gpio_desc *mctrl_gpio_to_gpiod(struct mctrl_gpios *gpios,
 				      enum mctrl_gpio_idx gidx)
 {
@@ -73,6 +86,14 @@ struct gpio_desc *mctrl_gpio_to_gpiod(struct mctrl_gpios *gpios,
 }
 EXPORT_SYMBOL_GPL(mctrl_gpio_to_gpiod);
 
+/**
+ * mctrl_gpio_get - update mctrl with the gpios values.
+ * @gpios: gpios to get the info from
+ * @mctrl: mctrl to set
+ * Returns: modified mctrl (the same value as in @mctrl)
+ *
+ * Update mctrl with the gpios values.
+ */
 unsigned int mctrl_gpio_get(struct mctrl_gpios *gpios, unsigned int *mctrl)
 {
 	enum mctrl_gpio_idx i;
@@ -189,6 +210,17 @@ static irqreturn_t mctrl_gpio_irq_handle(int irq, void *context)
 	return IRQ_HANDLED;
 }
 
+/**
+ * mctrl_gpio_init - initialize uart gpios
+ * @port: port to initialize gpios for
+ * @idx: index of the gpio in the @port's device
+ *
+ * This will get the {cts,rts,...}-gpios from device tree if they are present
+ * and request them, set direction etc, and return an allocated structure.
+ * `devm_*` functions are used, so there's no need to call mctrl_gpio_free().
+ * As this sets up the irq handling, make sure to not handle changes to the
+ * gpio input lines in your driver, too.
+ */
 struct mctrl_gpios *mctrl_gpio_init(struct uart_port *port, unsigned int idx)
 {
 	struct mctrl_gpios *gpios;
@@ -235,6 +267,14 @@ struct mctrl_gpios *mctrl_gpio_init(struct uart_port *port, unsigned int idx)
 }
 EXPORT_SYMBOL_GPL(mctrl_gpio_init);
 
+/**
+ * mctrl_gpio_free - explicitly free uart gpios
+ * @dev: uart port's device
+ * @gpios: gpios structure to be freed
+ *
+ * This will free the requested gpios in mctrl_gpio_init(). As `devm_*`
+ * functions are used, there's generally no need to call this function.
+ */
 void mctrl_gpio_free(struct device *dev, struct mctrl_gpios *gpios)
 {
 	enum mctrl_gpio_idx i;
@@ -253,6 +293,10 @@ void mctrl_gpio_free(struct device *dev, struct mctrl_gpios *gpios)
 }
 EXPORT_SYMBOL_GPL(mctrl_gpio_free);
 
+/**
+ * mctrl_gpio_enable_ms - enable irqs and handling of changes to the ms lines
+ * @gpios: gpios to enable
+ */
 void mctrl_gpio_enable_ms(struct mctrl_gpios *gpios)
 {
 	enum mctrl_gpio_idx i;
@@ -278,6 +322,10 @@ void mctrl_gpio_enable_ms(struct mctrl_gpios *gpios)
 }
 EXPORT_SYMBOL_GPL(mctrl_gpio_enable_ms);
 
+/**
+ * mctrl_gpio_disable_ms - disable irqs and handling of changes to the ms lines
+ * @gpios: gpios to disable
+ */
 void mctrl_gpio_disable_ms(struct mctrl_gpios *gpios)
 {
 	enum mctrl_gpio_idx i;
diff --git a/drivers/tty/serial/sifive.c b/drivers/tty/serial/sifive.c
index c0869b0..5c3a075 100644
--- a/drivers/tty/serial/sifive.c
+++ b/drivers/tty/serial/sifive.c
@@ -4,16 +4,6 @@
  * Copyright (C) 2018 Paul Walmsley <paul@pwsan.com>
  * Copyright (C) 2018-2019 SiFive
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
  * Based partially on:
  * - drivers/tty/serial/pxa.c
  * - drivers/tty/serial/amba-pl011.c
diff --git a/drivers/tty/serial/st-asc.c b/drivers/tty/serial/st-asc.c
index 1b0da60..cce42f4 100644
--- a/drivers/tty/serial/st-asc.c
+++ b/drivers/tty/serial/st-asc.c
@@ -17,7 +17,6 @@
 #include <linux/tty_flip.h>
 #include <linux/delay.h>
 #include <linux/spinlock.h>
-#include <linux/pm_runtime.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
 #include <linux/serial_core.h>
diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index 0973b03..2c85dbf 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -35,6 +35,75 @@
 #include "serial_mctrl_gpio.h"
 #include "stm32-usart.h"
 
+
+/* Register offsets */
+static struct stm32_usart_info stm32f4_info = {
+	.ofs = {
+		.isr	= 0x00,
+		.rdr	= 0x04,
+		.tdr	= 0x04,
+		.brr	= 0x08,
+		.cr1	= 0x0c,
+		.cr2	= 0x10,
+		.cr3	= 0x14,
+		.gtpr	= 0x18,
+		.rtor	= UNDEF_REG,
+		.rqr	= UNDEF_REG,
+		.icr	= UNDEF_REG,
+	},
+	.cfg = {
+		.uart_enable_bit = 13,
+		.has_7bits_data = false,
+		.fifosize = 1,
+	}
+};
+
+static struct stm32_usart_info stm32f7_info = {
+	.ofs = {
+		.cr1	= 0x00,
+		.cr2	= 0x04,
+		.cr3	= 0x08,
+		.brr	= 0x0c,
+		.gtpr	= 0x10,
+		.rtor	= 0x14,
+		.rqr	= 0x18,
+		.isr	= 0x1c,
+		.icr	= 0x20,
+		.rdr	= 0x24,
+		.tdr	= 0x28,
+	},
+	.cfg = {
+		.uart_enable_bit = 0,
+		.has_7bits_data = true,
+		.has_swap = true,
+		.fifosize = 1,
+	}
+};
+
+static struct stm32_usart_info stm32h7_info = {
+	.ofs = {
+		.cr1	= 0x00,
+		.cr2	= 0x04,
+		.cr3	= 0x08,
+		.brr	= 0x0c,
+		.gtpr	= 0x10,
+		.rtor	= 0x14,
+		.rqr	= 0x18,
+		.isr	= 0x1c,
+		.icr	= 0x20,
+		.rdr	= 0x24,
+		.tdr	= 0x28,
+	},
+	.cfg = {
+		.uart_enable_bit = 0,
+		.has_7bits_data = true,
+		.has_swap = true,
+		.has_wakeup = true,
+		.has_fifo = true,
+		.fifosize = 16,
+	}
+};
+
 static void stm32_usart_stop_tx(struct uart_port *port);
 static void stm32_usart_transmit_chars(struct uart_port *port);
 static void __maybe_unused stm32_usart_console_putchar(struct uart_port *port, unsigned char ch);
@@ -99,7 +168,7 @@ static void stm32_usart_config_reg_rs485(u32 *cr1, u32 *cr3, u32 delay_ADE,
 	*cr1 |= rs485_deat_dedt;
 }
 
-static int stm32_usart_config_rs485(struct uart_port *port,
+static int stm32_usart_config_rs485(struct uart_port *port, struct ktermios *termios,
 				    struct serial_rs485 *rs485conf)
 {
 	struct stm32_port *stm32_port = to_stm32_port(port);
@@ -1377,6 +1446,13 @@ static void stm32_usart_deinit_port(struct stm32_port *stm32port)
 	clk_disable_unprepare(stm32port->clk);
 }
 
+static const struct serial_rs485 stm32_rs485_supported = {
+	.flags = SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND | SER_RS485_RTS_AFTER_SEND |
+		 SER_RS485_RX_DURING_TX,
+	.delay_rts_before_send = 1,
+	.delay_rts_after_send = 1,
+};
+
 static int stm32_usart_init_port(struct stm32_port *stm32port,
 				 struct platform_device *pdev)
 {
@@ -1396,6 +1472,7 @@ static int stm32_usart_init_port(struct stm32_port *stm32port,
 	port->has_sysrq = IS_ENABLED(CONFIG_SERIAL_STM32_CONSOLE);
 	port->irq = irq;
 	port->rs485_config = stm32_usart_config_rs485;
+	port->rs485_supported = stm32_rs485_supported;
 
 	ret = stm32_usart_init_rs485(port, pdev);
 	if (ret)
diff --git a/drivers/tty/serial/stm32-usart.h b/drivers/tty/serial/stm32-usart.h
index ee69c20..0ec41a7 100644
--- a/drivers/tty/serial/stm32-usart.h
+++ b/drivers/tty/serial/stm32-usart.h
@@ -38,74 +38,6 @@ struct stm32_usart_info {
 
 #define UNDEF_REG 0xff
 
-/* Register offsets */
-struct stm32_usart_info stm32f4_info = {
-	.ofs = {
-		.isr	= 0x00,
-		.rdr	= 0x04,
-		.tdr	= 0x04,
-		.brr	= 0x08,
-		.cr1	= 0x0c,
-		.cr2	= 0x10,
-		.cr3	= 0x14,
-		.gtpr	= 0x18,
-		.rtor	= UNDEF_REG,
-		.rqr	= UNDEF_REG,
-		.icr	= UNDEF_REG,
-	},
-	.cfg = {
-		.uart_enable_bit = 13,
-		.has_7bits_data = false,
-		.fifosize = 1,
-	}
-};
-
-struct stm32_usart_info stm32f7_info = {
-	.ofs = {
-		.cr1	= 0x00,
-		.cr2	= 0x04,
-		.cr3	= 0x08,
-		.brr	= 0x0c,
-		.gtpr	= 0x10,
-		.rtor	= 0x14,
-		.rqr	= 0x18,
-		.isr	= 0x1c,
-		.icr	= 0x20,
-		.rdr	= 0x24,
-		.tdr	= 0x28,
-	},
-	.cfg = {
-		.uart_enable_bit = 0,
-		.has_7bits_data = true,
-		.has_swap = true,
-		.fifosize = 1,
-	}
-};
-
-struct stm32_usart_info stm32h7_info = {
-	.ofs = {
-		.cr1	= 0x00,
-		.cr2	= 0x04,
-		.cr3	= 0x08,
-		.brr	= 0x0c,
-		.gtpr	= 0x10,
-		.rtor	= 0x14,
-		.rqr	= 0x18,
-		.isr	= 0x1c,
-		.icr	= 0x20,
-		.rdr	= 0x24,
-		.tdr	= 0x28,
-	},
-	.cfg = {
-		.uart_enable_bit = 0,
-		.has_7bits_data = true,
-		.has_swap = true,
-		.has_wakeup = true,
-		.has_fifo = true,
-		.fifosize = 16,
-	}
-};
-
 /* USART_SR (F4) / USART_ISR (F7) */
 #define USART_SR_PE		BIT(0)
 #define USART_SR_FE		BIT(1)
diff --git a/drivers/tty/serial/sunsu.c b/drivers/tty/serial/sunsu.c
index fff50b5..84d545e 100644
--- a/drivers/tty/serial/sunsu.c
+++ b/drivers/tty/serial/sunsu.c
@@ -1249,8 +1249,6 @@ static int sunsu_kbd_ms_init(struct uart_sunsu_port *up)
 
 #ifdef CONFIG_SERIAL_SUNSU_CONSOLE
 
-#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
-
 /*
  *	Wait for transmitter & holding register to empty
  */
@@ -1268,7 +1266,7 @@ static void wait_for_xmitr(struct uart_sunsu_port *up)
 		if (--tmout == 0)
 			break;
 		udelay(1);
-	} while ((status & BOTH_EMPTY) != BOTH_EMPTY);
+	} while (!uart_lsr_tx_empty(status));
 
 	/* Wait up to 1s for flow control if necessary */
 	if (up->port.flags & UPF_CONS_FLOW) {
diff --git a/drivers/tty/serial/ucc_uart.c b/drivers/tty/serial/ucc_uart.c
index 6000853..3cc9ef0 100644
--- a/drivers/tty/serial/ucc_uart.c
+++ b/drivers/tty/serial/ucc_uart.c
@@ -1137,6 +1137,8 @@ static unsigned int soc_info(unsigned int *rev_h, unsigned int *rev_l)
 		/* No compatible property, so try the name. */
 		soc_string = np->name;
 
+	of_node_put(np);
+
 	/* Extract the SOC number from the "PowerPC," string */
 	if ((sscanf(soc_string, "PowerPC,%u", &soc) != 1) || !soc)
 		return 0;
diff --git a/drivers/tty/serial/vr41xx_siu.c b/drivers/tty/serial/vr41xx_siu.c
deleted file mode 100644
index e0bf003..0000000
--- a/drivers/tty/serial/vr41xx_siu.c
+++ /dev/null
@@ -1,934 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- *  Driver for NEC VR4100 series Serial Interface Unit.
- *
- *  Copyright (C) 2004-2008  Yoichi Yuasa <yuasa@linux-mips.org>
- *
- *  Based on drivers/serial/8250.c, by Russell King.
- */
-
-#include <linux/console.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/serial_reg.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-
-#include <linux/io.h>
-#include <asm/vr41xx/siu.h>
-#include <asm/vr41xx/vr41xx.h>
-
-#define SIU_BAUD_BASE	1152000
-#define SIU_MAJOR	204
-#define SIU_MINOR_BASE	82
-
-#define RX_MAX_COUNT	256
-#define TX_MAX_COUNT	15
-
-#define SIUIRSEL	0x08
- #define TMICMODE	0x20
- #define TMICTX		0x10
- #define IRMSEL		0x0c
- #define IRMSEL_HP	0x08
- #define IRMSEL_TEMIC	0x04
- #define IRMSEL_SHARP	0x00
- #define IRUSESEL	0x02
- #define SIRSEL		0x01
-
-static struct uart_port siu_uart_ports[SIU_PORTS_MAX] = {
-	[0 ... SIU_PORTS_MAX-1] = {
-		.lock	= __SPIN_LOCK_UNLOCKED(siu_uart_ports->lock),
-		.irq	= 0,
-	},
-};
-
-#ifdef CONFIG_SERIAL_VR41XX_CONSOLE
-static uint8_t lsr_break_flag[SIU_PORTS_MAX];
-#endif
-
-#define siu_read(port, offset)		readb((port)->membase + (offset))
-#define siu_write(port, offset, value)	writeb((value), (port)->membase + (offset))
-
-void vr41xx_select_siu_interface(siu_interface_t interface)
-{
-	struct uart_port *port;
-	unsigned long flags;
-	uint8_t irsel;
-
-	port = &siu_uart_ports[0];
-
-	spin_lock_irqsave(&port->lock, flags);
-
-	irsel = siu_read(port, SIUIRSEL);
-	if (interface == SIU_INTERFACE_IRDA)
-		irsel |= SIRSEL;
-	else
-		irsel &= ~SIRSEL;
-	siu_write(port, SIUIRSEL, irsel);
-
-	spin_unlock_irqrestore(&port->lock, flags);
-}
-EXPORT_SYMBOL_GPL(vr41xx_select_siu_interface);
-
-void vr41xx_use_irda(irda_use_t use)
-{
-	struct uart_port *port;
-	unsigned long flags;
-	uint8_t irsel;
-
-	port = &siu_uart_ports[0];
-
-	spin_lock_irqsave(&port->lock, flags);
-
-	irsel = siu_read(port, SIUIRSEL);
-	if (use == FIR_USE_IRDA)
-		irsel |= IRUSESEL;
-	else
-		irsel &= ~IRUSESEL;
-	siu_write(port, SIUIRSEL, irsel);
-
-	spin_unlock_irqrestore(&port->lock, flags);
-}
-EXPORT_SYMBOL_GPL(vr41xx_use_irda);
-
-void vr41xx_select_irda_module(irda_module_t module, irda_speed_t speed)
-{
-	struct uart_port *port;
-	unsigned long flags;
-	uint8_t irsel;
-
-	port = &siu_uart_ports[0];
-
-	spin_lock_irqsave(&port->lock, flags);
-
-	irsel = siu_read(port, SIUIRSEL);
-	irsel &= ~(IRMSEL | TMICTX | TMICMODE);
-	switch (module) {
-	case SHARP_IRDA:
-		irsel |= IRMSEL_SHARP;
-		break;
-	case TEMIC_IRDA:
-		irsel |= IRMSEL_TEMIC | TMICMODE;
-		if (speed == IRDA_TX_4MBPS)
-			irsel |= TMICTX;
-		break;
-	case HP_IRDA:
-		irsel |= IRMSEL_HP;
-		break;
-	default:
-		break;
-	}
-	siu_write(port, SIUIRSEL, irsel);
-
-	spin_unlock_irqrestore(&port->lock, flags);
-}
-EXPORT_SYMBOL_GPL(vr41xx_select_irda_module);
-
-static inline void siu_clear_fifo(struct uart_port *port)
-{
-	siu_write(port, UART_FCR, UART_FCR_ENABLE_FIFO);
-	siu_write(port, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR |
-	                          UART_FCR_CLEAR_XMIT);
-	siu_write(port, UART_FCR, 0);
-}
-
-static inline unsigned long siu_port_size(struct uart_port *port)
-{
-	switch (port->type) {
-	case PORT_VR41XX_SIU:
-		return 11UL;
-	case PORT_VR41XX_DSIU:
-		return 8UL;
-	}
-
-	return 0;
-}
-
-static inline unsigned int siu_check_type(struct uart_port *port)
-{
-	if (port->line == 0)
-		return PORT_VR41XX_SIU;
-	if (port->line == 1 && port->irq)
-		return PORT_VR41XX_DSIU;
-
-	return PORT_UNKNOWN;
-}
-
-static inline const char *siu_type_name(struct uart_port *port)
-{
-	switch (port->type) {
-	case PORT_VR41XX_SIU:
-		return "SIU";
-	case PORT_VR41XX_DSIU:
-		return "DSIU";
-	}
-
-	return NULL;
-}
-
-static unsigned int siu_tx_empty(struct uart_port *port)
-{
-	uint8_t lsr;
-
-	lsr = siu_read(port, UART_LSR);
-	if (lsr & UART_LSR_TEMT)
-		return TIOCSER_TEMT;
-
-	return 0;
-}
-
-static void siu_set_mctrl(struct uart_port *port, unsigned int mctrl)
-{
-	uint8_t mcr = 0;
-
-	if (mctrl & TIOCM_DTR)
-		mcr |= UART_MCR_DTR;
-	if (mctrl & TIOCM_RTS)
-		mcr |= UART_MCR_RTS;
-	if (mctrl & TIOCM_OUT1)
-		mcr |= UART_MCR_OUT1;
-	if (mctrl & TIOCM_OUT2)
-		mcr |= UART_MCR_OUT2;
-	if (mctrl & TIOCM_LOOP)
-		mcr |= UART_MCR_LOOP;
-
-	siu_write(port, UART_MCR, mcr);
-}
-
-static unsigned int siu_get_mctrl(struct uart_port *port)
-{
-	uint8_t msr;
-	unsigned int mctrl = 0;
-
-	msr = siu_read(port, UART_MSR);
-	if (msr & UART_MSR_DCD)
-		mctrl |= TIOCM_CAR;
-	if (msr & UART_MSR_RI)
-		mctrl |= TIOCM_RNG;
-	if (msr & UART_MSR_DSR)
-		mctrl |= TIOCM_DSR;
-	if (msr & UART_MSR_CTS)
-		mctrl |= TIOCM_CTS;
-
-	return mctrl;
-}
-
-static void siu_stop_tx(struct uart_port *port)
-{
-	unsigned long flags;
-	uint8_t ier;
-
-	spin_lock_irqsave(&port->lock, flags);
-
-	ier = siu_read(port, UART_IER);
-	ier &= ~UART_IER_THRI;
-	siu_write(port, UART_IER, ier);
-
-	spin_unlock_irqrestore(&port->lock, flags);
-}
-
-static void siu_start_tx(struct uart_port *port)
-{
-	unsigned long flags;
-	uint8_t ier;
-
-	spin_lock_irqsave(&port->lock, flags);
-
-	ier = siu_read(port, UART_IER);
-	ier |= UART_IER_THRI;
-	siu_write(port, UART_IER, ier);
-
-	spin_unlock_irqrestore(&port->lock, flags);
-}
-
-static void siu_stop_rx(struct uart_port *port)
-{
-	unsigned long flags;
-	uint8_t ier;
-
-	spin_lock_irqsave(&port->lock, flags);
-
-	ier = siu_read(port, UART_IER);
-	ier &= ~UART_IER_RLSI;
-	siu_write(port, UART_IER, ier);
-
-	port->read_status_mask &= ~UART_LSR_DR;
-
-	spin_unlock_irqrestore(&port->lock, flags);
-}
-
-static void siu_enable_ms(struct uart_port *port)
-{
-	unsigned long flags;
-	uint8_t ier;
-
-	spin_lock_irqsave(&port->lock, flags);
-
-	ier = siu_read(port, UART_IER);
-	ier |= UART_IER_MSI;
-	siu_write(port, UART_IER, ier);
-
-	spin_unlock_irqrestore(&port->lock, flags);
-}
-
-static void siu_break_ctl(struct uart_port *port, int ctl)
-{
-	unsigned long flags;
-	uint8_t lcr;
-
-	spin_lock_irqsave(&port->lock, flags);
-
-	lcr = siu_read(port, UART_LCR);
-	if (ctl == -1)
-		lcr |= UART_LCR_SBC;
-	else
-		lcr &= ~UART_LCR_SBC;
-	siu_write(port, UART_LCR, lcr);
-
-	spin_unlock_irqrestore(&port->lock, flags);
-}
-
-static inline void receive_chars(struct uart_port *port, uint8_t *status)
-{
-	uint8_t lsr, ch;
-	char flag;
-	int max_count = RX_MAX_COUNT;
-
-	lsr = *status;
-
-	do {
-		ch = siu_read(port, UART_RX);
-		port->icount.rx++;
-		flag = TTY_NORMAL;
-
-#ifdef CONFIG_SERIAL_VR41XX_CONSOLE
-		lsr |= lsr_break_flag[port->line];
-		lsr_break_flag[port->line] = 0;
-#endif
-		if (unlikely(lsr & (UART_LSR_BI | UART_LSR_FE |
-		                    UART_LSR_PE | UART_LSR_OE))) {
-			if (lsr & UART_LSR_BI) {
-				lsr &= ~(UART_LSR_FE | UART_LSR_PE);
-				port->icount.brk++;
-
-				if (uart_handle_break(port))
-					goto ignore_char;
-			}
-
-			if (lsr & UART_LSR_FE)
-				port->icount.frame++;
-			if (lsr & UART_LSR_PE)
-				port->icount.parity++;
-			if (lsr & UART_LSR_OE)
-				port->icount.overrun++;
-
-			lsr &= port->read_status_mask;
-			if (lsr & UART_LSR_BI)
-				flag = TTY_BREAK;
-			if (lsr & UART_LSR_FE)
-				flag = TTY_FRAME;
-			if (lsr & UART_LSR_PE)
-				flag = TTY_PARITY;
-		}
-
-		if (uart_handle_sysrq_char(port, ch))
-			goto ignore_char;
-
-		uart_insert_char(port, lsr, UART_LSR_OE, ch, flag);
-
-	ignore_char:
-		lsr = siu_read(port, UART_LSR);
-	} while ((lsr & UART_LSR_DR) && (max_count-- > 0));
-
-	tty_flip_buffer_push(&port->state->port);
-
-	*status = lsr;
-}
-
-static inline void check_modem_status(struct uart_port *port)
-{
-	uint8_t msr;
-
-	msr = siu_read(port, UART_MSR);
-	if ((msr & UART_MSR_ANY_DELTA) == 0)
-		return;
-	if (msr & UART_MSR_DDCD)
-		uart_handle_dcd_change(port, msr & UART_MSR_DCD);
-	if (msr & UART_MSR_TERI)
-		port->icount.rng++;
-	if (msr & UART_MSR_DDSR)
-		port->icount.dsr++;
-	if (msr & UART_MSR_DCTS)
-		uart_handle_cts_change(port, msr & UART_MSR_CTS);
-
-	wake_up_interruptible(&port->state->port.delta_msr_wait);
-}
-
-static inline void transmit_chars(struct uart_port *port)
-{
-	struct circ_buf *xmit;
-	int max_count = TX_MAX_COUNT;
-
-	xmit = &port->state->xmit;
-
-	if (port->x_char) {
-		siu_write(port, UART_TX, port->x_char);
-		port->icount.tx++;
-		port->x_char = 0;
-		return;
-	}
-
-	if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
-		siu_stop_tx(port);
-		return;
-	}
-
-	do {
-		siu_write(port, UART_TX, xmit->buf[xmit->tail]);
-		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
-		port->icount.tx++;
-		if (uart_circ_empty(xmit))
-			break;
-	} while (max_count-- > 0);
-
-	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
-		uart_write_wakeup(port);
-
-	if (uart_circ_empty(xmit))
-		siu_stop_tx(port);
-}
-
-static irqreturn_t siu_interrupt(int irq, void *dev_id)
-{
-	struct uart_port *port;
-	uint8_t iir, lsr;
-
-	port = (struct uart_port *)dev_id;
-
-	iir = siu_read(port, UART_IIR);
-	if (iir & UART_IIR_NO_INT)
-		return IRQ_NONE;
-
-	lsr = siu_read(port, UART_LSR);
-	if (lsr & UART_LSR_DR)
-		receive_chars(port, &lsr);
-
-	check_modem_status(port);
-
-	if (lsr & UART_LSR_THRE)
-		transmit_chars(port);
-
-	return IRQ_HANDLED;
-}
-
-static int siu_startup(struct uart_port *port)
-{
-	int retval;
-
-	if (port->membase == NULL)
-		return -ENODEV;
-
-	siu_clear_fifo(port);
-
-	(void)siu_read(port, UART_LSR);
-	(void)siu_read(port, UART_RX);
-	(void)siu_read(port, UART_IIR);
-	(void)siu_read(port, UART_MSR);
-
-	if (siu_read(port, UART_LSR) == 0xff)
-		return -ENODEV;
-
-	retval = request_irq(port->irq, siu_interrupt, 0, siu_type_name(port), port);
-	if (retval)
-		return retval;
-
-	if (port->type == PORT_VR41XX_DSIU)
-		vr41xx_enable_dsiuint(DSIUINT_ALL);
-
-	siu_write(port, UART_LCR, UART_LCR_WLEN8);
-
-	spin_lock_irq(&port->lock);
-	siu_set_mctrl(port, port->mctrl);
-	spin_unlock_irq(&port->lock);
-
-	siu_write(port, UART_IER, UART_IER_RLSI | UART_IER_RDI);
-
-	(void)siu_read(port, UART_LSR);
-	(void)siu_read(port, UART_RX);
-	(void)siu_read(port, UART_IIR);
-	(void)siu_read(port, UART_MSR);
-
-	return 0;
-}
-
-static void siu_shutdown(struct uart_port *port)
-{
-	unsigned long flags;
-	uint8_t lcr;
-
-	siu_write(port, UART_IER, 0);
-
-	spin_lock_irqsave(&port->lock, flags);
-
-	port->mctrl &= ~TIOCM_OUT2;
-	siu_set_mctrl(port, port->mctrl);
-
-	spin_unlock_irqrestore(&port->lock, flags);
-
-	lcr = siu_read(port, UART_LCR);
-	lcr &= ~UART_LCR_SBC;
-	siu_write(port, UART_LCR, lcr);
-
-	siu_clear_fifo(port);
-
-	(void)siu_read(port, UART_RX);
-
-	if (port->type == PORT_VR41XX_DSIU)
-		vr41xx_disable_dsiuint(DSIUINT_ALL);
-
-	free_irq(port->irq, port);
-}
-
-static void siu_set_termios(struct uart_port *port, struct ktermios *new,
-                            struct ktermios *old)
-{
-	tcflag_t c_cflag, c_iflag;
-	uint8_t lcr, fcr, ier;
-	unsigned int baud, quot;
-	unsigned long flags;
-
-	c_cflag = new->c_cflag;
-	lcr = UART_LCR_WLEN(tty_get_char_size(c_cflag));
-
-	if (c_cflag & CSTOPB)
-		lcr |= UART_LCR_STOP;
-	if (c_cflag & PARENB)
-		lcr |= UART_LCR_PARITY;
-	if ((c_cflag & PARODD) != PARODD)
-		lcr |= UART_LCR_EPAR;
-	if (c_cflag & CMSPAR)
-		lcr |= UART_LCR_SPAR;
-
-	baud = uart_get_baud_rate(port, new, old, 0, port->uartclk/16);
-	quot = uart_get_divisor(port, baud);
-
-	fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10;
-
-	spin_lock_irqsave(&port->lock, flags);
-
-	uart_update_timeout(port, c_cflag, baud);
-
-	c_iflag = new->c_iflag;
-
-	port->read_status_mask = UART_LSR_THRE | UART_LSR_OE | UART_LSR_DR;
-	if (c_iflag & INPCK)
-		port->read_status_mask |= UART_LSR_FE | UART_LSR_PE;
-	if (c_iflag & (IGNBRK | BRKINT | PARMRK))
-		port->read_status_mask |= UART_LSR_BI;
-
-	port->ignore_status_mask = 0;
-	if (c_iflag & IGNPAR)
-		port->ignore_status_mask |= UART_LSR_FE | UART_LSR_PE;
-	if (c_iflag & IGNBRK) {
-		port->ignore_status_mask |= UART_LSR_BI;
-		if (c_iflag & IGNPAR)
-			port->ignore_status_mask |= UART_LSR_OE;
-	}
-
-	if ((c_cflag & CREAD) == 0)
-		port->ignore_status_mask |= UART_LSR_DR;
-
-	ier = siu_read(port, UART_IER);
-	ier &= ~UART_IER_MSI;
-	if (UART_ENABLE_MS(port, c_cflag))
-		ier |= UART_IER_MSI;
-	siu_write(port, UART_IER, ier);
-
-	siu_write(port, UART_LCR, lcr | UART_LCR_DLAB);
-
-	siu_write(port, UART_DLL, (uint8_t)quot);
-	siu_write(port, UART_DLM, (uint8_t)(quot >> 8));
-
-	siu_write(port, UART_LCR, lcr);
-
-	siu_write(port, UART_FCR, fcr);
-
-	siu_set_mctrl(port, port->mctrl);
-
-	spin_unlock_irqrestore(&port->lock, flags);
-}
-
-static void siu_pm(struct uart_port *port, unsigned int state, unsigned int oldstate)
-{
-	switch (state) {
-	case 0:
-		switch (port->type) {
-		case PORT_VR41XX_SIU:
-			vr41xx_supply_clock(SIU_CLOCK);
-			break;
-		case PORT_VR41XX_DSIU:
-			vr41xx_supply_clock(DSIU_CLOCK);
-			break;
-		}
-		break;
-	case 3:
-		switch (port->type) {
-		case PORT_VR41XX_SIU:
-			vr41xx_mask_clock(SIU_CLOCK);
-			break;
-		case PORT_VR41XX_DSIU:
-			vr41xx_mask_clock(DSIU_CLOCK);
-			break;
-		}
-		break;
-	}
-}
-
-static const char *siu_type(struct uart_port *port)
-{
-	return siu_type_name(port);
-}
-
-static void siu_release_port(struct uart_port *port)
-{
-	unsigned long size;
-
-	if (port->flags	& UPF_IOREMAP) {
-		iounmap(port->membase);
-		port->membase = NULL;
-	}
-
-	size = siu_port_size(port);
-	release_mem_region(port->mapbase, size);
-}
-
-static int siu_request_port(struct uart_port *port)
-{
-	unsigned long size;
-	struct resource *res;
-
-	size = siu_port_size(port);
-	res = request_mem_region(port->mapbase, size, siu_type_name(port));
-	if (res == NULL)
-		return -EBUSY;
-
-	if (port->flags & UPF_IOREMAP) {
-		port->membase = ioremap(port->mapbase, size);
-		if (port->membase == NULL) {
-			release_resource(res);
-			return -ENOMEM;
-		}
-	}
-
-	return 0;
-}
-
-static void siu_config_port(struct uart_port *port, int flags)
-{
-	if (flags & UART_CONFIG_TYPE) {
-		port->type = siu_check_type(port);
-		(void)siu_request_port(port);
-	}
-}
-
-static int siu_verify_port(struct uart_port *port, struct serial_struct *serial)
-{
-	if (port->type != PORT_VR41XX_SIU && port->type != PORT_VR41XX_DSIU)
-		return -EINVAL;
-	if (port->irq != serial->irq)
-		return -EINVAL;
-	if (port->iotype != serial->io_type)
-		return -EINVAL;
-	if (port->mapbase != (unsigned long)serial->iomem_base)
-		return -EINVAL;
-
-	return 0;
-}
-
-static const struct uart_ops siu_uart_ops = {
-	.tx_empty	= siu_tx_empty,
-	.set_mctrl	= siu_set_mctrl,
-	.get_mctrl	= siu_get_mctrl,
-	.stop_tx	= siu_stop_tx,
-	.start_tx	= siu_start_tx,
-	.stop_rx	= siu_stop_rx,
-	.enable_ms	= siu_enable_ms,
-	.break_ctl	= siu_break_ctl,
-	.startup	= siu_startup,
-	.shutdown	= siu_shutdown,
-	.set_termios	= siu_set_termios,
-	.pm		= siu_pm,
-	.type		= siu_type,
-	.release_port	= siu_release_port,
-	.request_port	= siu_request_port,
-	.config_port	= siu_config_port,
-	.verify_port	= siu_verify_port,
-};
-
-static int siu_init_ports(struct platform_device *pdev)
-{
-	struct uart_port *port;
-	struct resource *res;
-	int *type = dev_get_platdata(&pdev->dev);
-	int i;
-
-	if (!type)
-		return 0;
-
-	port = siu_uart_ports;
-	for (i = 0; i < SIU_PORTS_MAX; i++) {
-		port->type = type[i];
-		if (port->type == PORT_UNKNOWN)
-			continue;
-		port->irq = platform_get_irq(pdev, i);
-		port->uartclk = SIU_BAUD_BASE * 16;
-		port->fifosize = 16;
-		port->regshift = 0;
-		port->iotype = UPIO_MEM;
-		port->flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF;
-		port->line = i;
-		res = platform_get_resource(pdev, IORESOURCE_MEM, i);
-		port->mapbase = res->start;
-		port++;
-	}
-
-	return i;
-}
-
-#ifdef CONFIG_SERIAL_VR41XX_CONSOLE
-
-#define BOTH_EMPTY	(UART_LSR_TEMT | UART_LSR_THRE)
-
-static void wait_for_xmitr(struct uart_port *port)
-{
-	int timeout = 10000;
-	uint8_t lsr, msr;
-
-	do {
-		lsr = siu_read(port, UART_LSR);
-		if (lsr & UART_LSR_BI)
-			lsr_break_flag[port->line] = UART_LSR_BI;
-
-		if ((lsr & BOTH_EMPTY) == BOTH_EMPTY)
-			break;
-	} while (timeout-- > 0);
-
-	if (port->flags & UPF_CONS_FLOW) {
-		timeout = 1000000;
-
-		do {
-			msr = siu_read(port, UART_MSR);
-			if ((msr & UART_MSR_CTS) != 0)
-				break;
-		} while (timeout-- > 0);
-	}
-}
-
-static void siu_console_putchar(struct uart_port *port, unsigned char ch)
-{
-	wait_for_xmitr(port);
-	siu_write(port, UART_TX, ch);
-}
-
-static void siu_console_write(struct console *con, const char *s, unsigned count)
-{
-	struct uart_port *port;
-	uint8_t ier;
-
-	port = &siu_uart_ports[con->index];
-
-	ier = siu_read(port, UART_IER);
-	siu_write(port, UART_IER, 0);
-
-	uart_console_write(port, s, count, siu_console_putchar);
-
-	wait_for_xmitr(port);
-	siu_write(port, UART_IER, ier);
-}
-
-static int __init siu_console_setup(struct console *con, char *options)
-{
-	struct uart_port *port;
-	int baud = 9600;
-	int parity = 'n';
-	int bits = 8;
-	int flow = 'n';
-
-	if (con->index >= SIU_PORTS_MAX)
-		con->index = 0;
-
-	port = &siu_uart_ports[con->index];
-	if (port->membase == NULL) {
-		if (port->mapbase == 0)
-			return -ENODEV;
-		port->membase = ioremap(port->mapbase, siu_port_size(port));
-	}
-
-	if (port->type == PORT_VR41XX_SIU)
-		vr41xx_select_siu_interface(SIU_INTERFACE_RS232C);
-
-	if (options != NULL)
-		uart_parse_options(options, &baud, &parity, &bits, &flow);
-
-	return uart_set_options(port, con, baud, parity, bits, flow);
-}
-
-static struct uart_driver siu_uart_driver;
-
-static struct console siu_console = {
-	.name	= "ttyVR",
-	.write	= siu_console_write,
-	.device	= uart_console_device,
-	.setup	= siu_console_setup,
-	.flags	= CON_PRINTBUFFER,
-	.index	= -1,
-	.data	= &siu_uart_driver,
-};
-
-static int siu_console_init(void)
-{
-	struct uart_port *port;
-	int i;
-
-	for (i = 0; i < SIU_PORTS_MAX; i++) {
-		port = &siu_uart_ports[i];
-		port->ops = &siu_uart_ops;
-	}
-
-	register_console(&siu_console);
-
-	return 0;
-}
-
-console_initcall(siu_console_init);
-
-void __init vr41xx_siu_early_setup(struct uart_port *port)
-{
-	if (port->type == PORT_UNKNOWN)
-		return;
-
-	siu_uart_ports[port->line].line = port->line;
-	siu_uart_ports[port->line].type = port->type;
-	siu_uart_ports[port->line].uartclk = SIU_BAUD_BASE * 16;
-	siu_uart_ports[port->line].mapbase = port->mapbase;
-	siu_uart_ports[port->line].ops = &siu_uart_ops;
-}
-
-#define SERIAL_VR41XX_CONSOLE	&siu_console
-#else
-#define SERIAL_VR41XX_CONSOLE	NULL
-#endif
-
-static struct uart_driver siu_uart_driver = {
-	.owner		= THIS_MODULE,
-	.driver_name	= "SIU",
-	.dev_name	= "ttyVR",
-	.major		= SIU_MAJOR,
-	.minor		= SIU_MINOR_BASE,
-	.cons		= SERIAL_VR41XX_CONSOLE,
-};
-
-static int siu_probe(struct platform_device *dev)
-{
-	struct uart_port *port;
-	int num, i, retval;
-
-	num = siu_init_ports(dev);
-	if (num <= 0)
-		return -ENODEV;
-
-	siu_uart_driver.nr = num;
-	retval = uart_register_driver(&siu_uart_driver);
-	if (retval)
-		return retval;
-
-	for (i = 0; i < num; i++) {
-		port = &siu_uart_ports[i];
-		port->ops = &siu_uart_ops;
-		port->dev = &dev->dev;
-		port->has_sysrq = IS_ENABLED(CONFIG_SERIAL_VR41XX_CONSOLE);
-
-		retval = uart_add_one_port(&siu_uart_driver, port);
-		if (retval < 0) {
-			port->dev = NULL;
-			break;
-		}
-	}
-
-	if (i == 0 && retval < 0) {
-		uart_unregister_driver(&siu_uart_driver);
-		return retval;
-	}
-
-	return 0;
-}
-
-static int siu_remove(struct platform_device *dev)
-{
-	struct uart_port *port;
-	int i;
-
-	for (i = 0; i < siu_uart_driver.nr; i++) {
-		port = &siu_uart_ports[i];
-		if (port->dev == &dev->dev) {
-			uart_remove_one_port(&siu_uart_driver, port);
-			port->dev = NULL;
-		}
-	}
-
-	uart_unregister_driver(&siu_uart_driver);
-
-	return 0;
-}
-
-static int siu_suspend(struct platform_device *dev, pm_message_t state)
-{
-	struct uart_port *port;
-	int i;
-
-	for (i = 0; i < siu_uart_driver.nr; i++) {
-		port = &siu_uart_ports[i];
-		if ((port->type == PORT_VR41XX_SIU ||
-		     port->type == PORT_VR41XX_DSIU) && port->dev == &dev->dev)
-			uart_suspend_port(&siu_uart_driver, port);
-
-	}
-
-	return 0;
-}
-
-static int siu_resume(struct platform_device *dev)
-{
-	struct uart_port *port;
-	int i;
-
-	for (i = 0; i < siu_uart_driver.nr; i++) {
-		port = &siu_uart_ports[i];
-		if ((port->type == PORT_VR41XX_SIU ||
-		     port->type == PORT_VR41XX_DSIU) && port->dev == &dev->dev)
-			uart_resume_port(&siu_uart_driver, port);
-	}
-
-	return 0;
-}
-
-static struct platform_driver siu_device_driver = {
-	.probe		= siu_probe,
-	.remove		= siu_remove,
-	.suspend	= siu_suspend,
-	.resume		= siu_resume,
-	.driver		= {
-		.name	= "SIU",
-	},
-};
-
-module_platform_driver(siu_device_driver);
-
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:SIU");
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index 595d8b4..9fdecc7 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -5,6 +5,7 @@
 
 #include <linux/types.h>
 #include <linux/errno.h>
+#include <linux/minmax.h>
 #include <linux/tty.h>
 #include <linux/tty_driver.h>
 #include <linux/tty_flip.h>
@@ -104,6 +105,7 @@ static void tty_buffer_reset(struct tty_buffer *p, size_t size)
 	p->size = size;
 	p->next = NULL;
 	p->commit = 0;
+	p->lookahead = 0;
 	p->read = 0;
 	p->flags = 0;
 }
@@ -234,6 +236,7 @@ void tty_buffer_flush(struct tty_struct *tty, struct tty_ldisc *ld)
 		buf->head = next;
 	}
 	buf->head->read = buf->head->commit;
+	buf->head->lookahead = buf->head->read;
 
 	if (ld && ld->ops->flush_buffer)
 		ld->ops->flush_buffer(tty);
@@ -276,13 +279,15 @@ static int __tty_buffer_request_room(struct tty_port *port, size_t size,
 		if (n != NULL) {
 			n->flags = flags;
 			buf->tail = n;
-			/* paired w/ acquire in flush_to_ldisc(); ensures
-			 * flush_to_ldisc() sees buffer data.
+			/*
+			 * Paired w/ acquire in flush_to_ldisc() and lookahead_bufs()
+			 * ensures they see all buffer data.
 			 */
 			smp_store_release(&b->commit, b->used);
-			/* paired w/ acquire in flush_to_ldisc(); ensures the
-			 * latest commit value can be read before the head is
-			 * advanced to the next buffer
+			/*
+			 * Paired w/ acquire in flush_to_ldisc() and lookahead_bufs()
+			 * ensures the latest commit value can be read before the head
+			 * is advanced to the next buffer.
 			 */
 			smp_store_release(&b->next, n);
 		} else if (change)
@@ -459,6 +464,40 @@ int tty_ldisc_receive_buf(struct tty_ldisc *ld, const unsigned char *p,
 }
 EXPORT_SYMBOL_GPL(tty_ldisc_receive_buf);
 
+static void lookahead_bufs(struct tty_port *port, struct tty_buffer *head)
+{
+	head->lookahead = max(head->lookahead, head->read);
+
+	while (head) {
+		struct tty_buffer *next;
+		unsigned char *p, *f = NULL;
+		unsigned int count;
+
+		/*
+		 * Paired w/ release in __tty_buffer_request_room();
+		 * ensures commit value read is not stale if the head
+		 * is advancing to the next buffer.
+		 */
+		next = smp_load_acquire(&head->next);
+		/*
+		 * Paired w/ release in __tty_buffer_request_room() or in
+		 * tty_buffer_flush(); ensures we see the committed buffer data.
+		 */
+		count = smp_load_acquire(&head->commit) - head->lookahead;
+		if (!count) {
+			head = next;
+			continue;
+		}
+
+		p = char_buf_ptr(head, head->lookahead);
+		if (~head->flags & TTYB_NORMAL)
+			f = flag_buf_ptr(head, head->lookahead);
+
+		port->client_ops->lookahead_buf(port, p, f, count);
+		head->lookahead += count;
+	}
+}
+
 static int
 receive_buf(struct tty_port *port, struct tty_buffer *head, int count)
 {
@@ -496,7 +535,7 @@ static void flush_to_ldisc(struct work_struct *work)
 	while (1) {
 		struct tty_buffer *head = buf->head;
 		struct tty_buffer *next;
-		int count;
+		int count, rcvd;
 
 		/* Ldisc or user is trying to gain exclusive access */
 		if (atomic_read(&buf->priority))
@@ -519,10 +558,12 @@ static void flush_to_ldisc(struct work_struct *work)
 			continue;
 		}
 
-		count = receive_buf(port, head, count);
-		if (!count)
+		rcvd = receive_buf(port, head, count);
+		head->read += rcvd;
+		if (rcvd < count)
+			lookahead_bufs(port, head);
+		if (!rcvd)
 			break;
-		head->read += count;
 
 		if (need_resched())
 			cond_resched();
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index 8fec1d8..82a8855 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -1663,7 +1663,7 @@ void tty_kclose(struct tty_struct *tty)
 	 */
 	tty_ldisc_release(tty);
 
-	/* Wait for pending work before tty destruction commmences */
+	/* Wait for pending work before tty destruction commences */
 	tty_flush_works(tty);
 
 	tty_debug_hangup(tty, "freeing structure\n");
diff --git a/drivers/tty/tty_ioctl.c b/drivers/tty/tty_ioctl.c
index adae687..2a76b33 100644
--- a/drivers/tty/tty_ioctl.c
+++ b/drivers/tty/tty_ioctl.c
@@ -319,6 +319,8 @@ unsigned char tty_get_frame_size(unsigned int cflag)
 		bits++;
 	if (cflag & PARENB)
 		bits++;
+	if (cflag & ADDRB)
+		bits++;
 
 	return bits;
 }
@@ -353,6 +355,8 @@ int tty_set_termios(struct tty_struct *tty, struct ktermios *new_termios)
 	old_termios = tty->termios;
 	tty->termios = *new_termios;
 	unset_locked_termios(tty, &old_termios);
+	/* Reset any ADDRB changes, ADDRB is changed through ->rs485_config() */
+	tty->termios.c_cflag ^= (tty->termios.c_cflag ^ old_termios.c_cflag) & ADDRB;
 
 	if (tty->ops->set_termios)
 		tty->ops->set_termios(tty, &old_termios);
diff --git a/drivers/tty/tty_port.c b/drivers/tty/tty_port.c
index 880608a..dce08a6 100644
--- a/drivers/tty/tty_port.c
+++ b/drivers/tty/tty_port.c
@@ -43,6 +43,26 @@ static int tty_port_default_receive_buf(struct tty_port *port,
 	return ret;
 }
 
+static void tty_port_default_lookahead_buf(struct tty_port *port, const unsigned char *p,
+					   const unsigned char *f, unsigned int count)
+{
+	struct tty_struct *tty;
+	struct tty_ldisc *disc;
+
+	tty = READ_ONCE(port->itty);
+	if (!tty)
+		return;
+
+	disc = tty_ldisc_ref(tty);
+	if (!disc)
+		return;
+
+	if (disc->ops->lookahead_buf)
+		disc->ops->lookahead_buf(disc->tty, p, f, count);
+
+	tty_ldisc_deref(disc);
+}
+
 static void tty_port_default_wakeup(struct tty_port *port)
 {
 	struct tty_struct *tty = tty_port_tty_get(port);
@@ -55,6 +75,7 @@ static void tty_port_default_wakeup(struct tty_port *port)
 
 const struct tty_port_client_operations tty_port_default_client_ops = {
 	.receive_buf = tty_port_default_receive_buf,
+	.lookahead_buf = tty_port_default_lookahead_buf,
 	.write_wakeup = tty_port_default_wakeup,
 };
 EXPORT_SYMBOL_GPL(tty_port_default_client_ops);
diff --git a/drivers/tty/vt/Makefile b/drivers/tty/vt/Makefile
index fe30ce5..b3dfe9d 100644
--- a/drivers/tty/vt/Makefile
+++ b/drivers/tty/vt/Makefile
@@ -30,6 +30,6 @@
 ifdef GENERATE_KEYMAP
 
 $(obj)/defkeymap.c: $(obj)/%.c: $(src)/%.map
-	loadkeys --mktable $< > $@
+	loadkeys --mktable --unicode $< > $@
 
 endif
diff --git a/drivers/tty/vt/consolemap.c b/drivers/tty/vt/consolemap.c
index d815ac9..f02d21e 100644
--- a/drivers/tty/vt/consolemap.c
+++ b/drivers/tty/vt/consolemap.c
@@ -23,6 +23,8 @@
  * stack overflow.
  */
 
+#include <linux/bitfield.h>
+#include <linux/bits.h>
 #include <linux/module.h>
 #include <linux/kd.h>
 #include <linux/errno.h>
@@ -36,9 +38,9 @@
 #include <linux/vt_kern.h>
 #include <linux/string.h>
 
-static unsigned short translations[][256] = {
+static unsigned short translations[][E_TABSZ] = {
   /* 8-bit Latin-1 mapped to Unicode -- trivial mapping */
-  {
+  [LAT1_MAP] = {
     0x0000, 0x0001, 0x0002, 0x0003, 0x0004, 0x0005, 0x0006, 0x0007,
     0x0008, 0x0009, 0x000a, 0x000b, 0x000c, 0x000d, 0x000e, 0x000f,
     0x0010, 0x0011, 0x0012, 0x0013, 0x0014, 0x0015, 0x0016, 0x0017,
@@ -71,9 +73,9 @@ static unsigned short translations[][256] = {
     0x00e8, 0x00e9, 0x00ea, 0x00eb, 0x00ec, 0x00ed, 0x00ee, 0x00ef,
     0x00f0, 0x00f1, 0x00f2, 0x00f3, 0x00f4, 0x00f5, 0x00f6, 0x00f7,
     0x00f8, 0x00f9, 0x00fa, 0x00fb, 0x00fc, 0x00fd, 0x00fe, 0x00ff
-  }, 
+  },
   /* VT100 graphics mapped to Unicode */
-  {
+  [GRAF_MAP] = {
     0x0000, 0x0001, 0x0002, 0x0003, 0x0004, 0x0005, 0x0006, 0x0007,
     0x0008, 0x0009, 0x000a, 0x000b, 0x000c, 0x000d, 0x000e, 0x000f,
     0x0010, 0x0011, 0x0012, 0x0013, 0x0014, 0x0015, 0x0016, 0x0017,
@@ -108,8 +110,8 @@ static unsigned short translations[][256] = {
     0x00f8, 0x00f9, 0x00fa, 0x00fb, 0x00fc, 0x00fd, 0x00fe, 0x00ff
   },
   /* IBM Codepage 437 mapped to Unicode */
-  {
-    0x0000, 0x263a, 0x263b, 0x2665, 0x2666, 0x2663, 0x2660, 0x2022, 
+  [IBMPC_MAP] = {
+    0x0000, 0x263a, 0x263b, 0x2665, 0x2666, 0x2663, 0x2660, 0x2022,
     0x25d8, 0x25cb, 0x25d9, 0x2642, 0x2640, 0x266a, 0x266b, 0x263c,
     0x25b6, 0x25c0, 0x2195, 0x203c, 0x00b6, 0x00a7, 0x25ac, 0x21a8,
     0x2191, 0x2193, 0x2192, 0x2190, 0x221f, 0x2194, 0x25b2, 0x25bc,
@@ -141,9 +143,9 @@ static unsigned short translations[][256] = {
     0x03a6, 0x0398, 0x03a9, 0x03b4, 0x221e, 0x03c6, 0x03b5, 0x2229,
     0x2261, 0x00b1, 0x2265, 0x2264, 0x2320, 0x2321, 0x00f7, 0x2248,
     0x00b0, 0x2219, 0x00b7, 0x221a, 0x207f, 0x00b2, 0x25a0, 0x00a0
-  }, 
+  },
   /* User mapping -- default to codes for direct font mapping */
-  {
+  [USER_MAP] = {
     0xf000, 0xf001, 0xf002, 0xf003, 0xf004, 0xf005, 0xf006, 0xf007,
     0xf008, 0xf009, 0xf00a, 0xf00b, 0xf00c, 0xf00d, 0xf00e, 0xf00f,
     0xf010, 0xf011, 0xf012, 0xf013, 0xf014, 0xf015, 0xf016, 0xf017,
@@ -184,78 +186,105 @@ static unsigned short translations[][256] = {
 
 #define MAX_GLYPH 512		/* Max possible glyph value */
 
-static int inv_translate[MAX_NR_CONSOLES];
+static enum translation_map inv_translate[MAX_NR_CONSOLES];
 
-struct uni_pagedir {
-	u16 		**uni_pgdir[32];
+#define UNI_DIRS	32U
+#define UNI_DIR_ROWS	32U
+#define UNI_ROW_GLYPHS	64U
+
+#define UNI_DIR_BITS		GENMASK(15, 11)
+#define UNI_ROW_BITS		GENMASK(10,  6)
+#define UNI_GLYPH_BITS		GENMASK( 5,  0)
+
+#define UNI_DIR(uni)		FIELD_GET(UNI_DIR_BITS, (uni))
+#define UNI_ROW(uni)		FIELD_GET(UNI_ROW_BITS, (uni))
+#define UNI_GLYPH(uni)		FIELD_GET(UNI_GLYPH_BITS, (uni))
+
+#define UNI(dir, row, glyph)	(FIELD_PREP(UNI_DIR_BITS, (dir)) | \
+				 FIELD_PREP(UNI_ROW_BITS, (row)) | \
+				 FIELD_PREP(UNI_GLYPH_BITS, (glyph)))
+
+/**
+ * struct uni_pagedict -- unicode directory
+ *
+ * @uni_pgdir: 32*32*64 table with glyphs
+ * @refcount: reference count of this structure
+ * @sum: checksum
+ * @inverse_translations: best-effort inverse mapping
+ * @inverse_trans_unicode: best-effort inverse mapping to unicode
+ */
+struct uni_pagedict {
+	u16		**uni_pgdir[UNI_DIRS];
 	unsigned long	refcount;
 	unsigned long	sum;
-	unsigned char	*inverse_translations[4];
+	unsigned char	*inverse_translations[LAST_MAP + 1];
 	u16		*inverse_trans_unicode;
 };
 
-static struct uni_pagedir *dflt;
+static struct uni_pagedict *dflt;
 
-static void set_inverse_transl(struct vc_data *conp, struct uni_pagedir *p, int i)
+static void set_inverse_transl(struct vc_data *conp, struct uni_pagedict *dict,
+	       enum translation_map m)
 {
-	int j, glyph;
-	unsigned short *t = translations[i];
-	unsigned char *q;
-	
-	if (!p) return;
-	q = p->inverse_translations[i];
+	unsigned short *t = translations[m];
+	unsigned char *inv;
 
-	if (!q) {
-		q = p->inverse_translations[i] = kmalloc(MAX_GLYPH, GFP_KERNEL);
-		if (!q) return;
+	if (!dict)
+		return;
+	inv = dict->inverse_translations[m];
+
+	if (!inv) {
+		inv = dict->inverse_translations[m] = kmalloc(MAX_GLYPH,
+				GFP_KERNEL);
+		if (!inv)
+			return;
 	}
-	memset(q, 0, MAX_GLYPH);
+	memset(inv, 0, MAX_GLYPH);
 
-	for (j = 0; j < E_TABSZ; j++) {
-		glyph = conv_uni_to_pc(conp, t[j]);
-		if (glyph >= 0 && glyph < MAX_GLYPH && q[glyph] < 32) {
+	for (unsigned int ch = 0; ch < ARRAY_SIZE(translations[m]); ch++) {
+		int glyph = conv_uni_to_pc(conp, t[ch]);
+		if (glyph >= 0 && glyph < MAX_GLYPH && inv[glyph] < 32) {
 			/* prefer '-' above SHY etc. */
-		  	q[glyph] = j;
+			inv[glyph] = ch;
 		}
 	}
 }
 
-static void set_inverse_trans_unicode(struct vc_data *conp,
-				      struct uni_pagedir *p)
+static void set_inverse_trans_unicode(struct uni_pagedict *dict)
 {
-	int i, j, k, glyph;
-	u16 **p1, *p2;
-	u16 *q;
+	unsigned int d, r, g;
+	u16 *inv;
 
-	if (!p) return;
-	q = p->inverse_trans_unicode;
-	if (!q) {
-		q = p->inverse_trans_unicode =
-			kmalloc_array(MAX_GLYPH, sizeof(u16), GFP_KERNEL);
-		if (!q)
+	if (!dict)
+		return;
+
+	inv = dict->inverse_trans_unicode;
+	if (!inv) {
+		inv = dict->inverse_trans_unicode = kmalloc_array(MAX_GLYPH,
+				sizeof(*inv), GFP_KERNEL);
+		if (!inv)
 			return;
 	}
-	memset(q, 0, MAX_GLYPH * sizeof(u16));
+	memset(inv, 0, MAX_GLYPH * sizeof(*inv));
 
-	for (i = 0; i < 32; i++) {
-		p1 = p->uni_pgdir[i];
-		if (!p1)
+	for (d = 0; d < UNI_DIRS; d++) {
+		u16 **dir = dict->uni_pgdir[d];
+		if (!dir)
 			continue;
-		for (j = 0; j < 32; j++) {
-			p2 = p1[j];
-			if (!p2)
+		for (r = 0; r < UNI_DIR_ROWS; r++) {
+			u16 *row = dir[r];
+			if (!row)
 				continue;
-			for (k = 0; k < 64; k++) {
-				glyph = p2[k];
-				if (glyph >= 0 && glyph < MAX_GLYPH
-					       && q[glyph] < 32)
-		  			q[glyph] = (i << 11) + (j << 6) + k;
+			for (g = 0; g < UNI_ROW_GLYPHS; g++) {
+				u16 glyph = row[g];
+				if (glyph < MAX_GLYPH && inv[glyph] < 32)
+					inv[glyph] = UNI(d, r, g);
 			}
 		}
 	}
 }
 
-unsigned short *set_translate(int m, struct vc_data *vc)
+unsigned short *set_translate(enum translation_map m, struct vc_data *vc)
 {
 	inv_translate[vc->vc_num] = m;
 	return translations[m];
@@ -268,44 +297,45 @@ unsigned short *set_translate(int m, struct vc_data *vc)
  *    was active.
  * Still, it is now possible to a certain extent to cut and paste non-ASCII.
  */
-u16 inverse_translate(const struct vc_data *conp, int glyph, int use_unicode)
+u16 inverse_translate(const struct vc_data *conp, u16 glyph, bool use_unicode)
 {
-	struct uni_pagedir *p;
-	int m;
-	if (glyph < 0 || glyph >= MAX_GLYPH)
+	struct uni_pagedict *p;
+	enum translation_map m;
+
+	if (glyph >= MAX_GLYPH)
 		return 0;
-	else {
-		p = *conp->vc_uni_pagedir_loc;
-		if (!p)
+
+	p = *conp->uni_pagedict_loc;
+	if (!p)
+		return glyph;
+
+	if (use_unicode) {
+		if (!p->inverse_trans_unicode)
 			return glyph;
-		else if (use_unicode) {
-			if (!p->inverse_trans_unicode)
-				return glyph;
-			else
-				return p->inverse_trans_unicode[glyph];
-			} else {
-			m = inv_translate[conp->vc_num];
-			if (!p->inverse_translations[m])
-				return glyph;
-			else
-				return p->inverse_translations[m][glyph];
-			}
+
+		return p->inverse_trans_unicode[glyph];
 	}
+
+	m = inv_translate[conp->vc_num];
+	if (!p->inverse_translations[m])
+		return glyph;
+
+	return p->inverse_translations[m][glyph];
 }
 EXPORT_SYMBOL_GPL(inverse_translate);
 
 static void update_user_maps(void)
 {
 	int i;
-	struct uni_pagedir *p, *q = NULL;
-	
+	struct uni_pagedict *p, *q = NULL;
+
 	for (i = 0; i < MAX_NR_CONSOLES; i++) {
 		if (!vc_cons_allocated(i))
 			continue;
-		p = *vc_cons[i].d->vc_uni_pagedir_loc;
+		p = *vc_cons[i].d->uni_pagedict_loc;
 		if (p && p != q) {
 			set_inverse_transl(vc_cons[i].d, p, USER_MAP);
-			set_inverse_trans_unicode(vc_cons[i].d, p);
+			set_inverse_trans_unicode(p);
 			q = p;
 		}
 	}
@@ -321,15 +351,15 @@ static void update_user_maps(void)
  */
 int con_set_trans_old(unsigned char __user * arg)
 {
-	int i;
 	unsigned short inbuf[E_TABSZ];
-	unsigned char ubuf[E_TABSZ];
+	unsigned int i;
+	unsigned char ch;
 
-	if (copy_from_user(ubuf, arg, E_TABSZ))
-		return -EFAULT;
-
-	for (i = 0; i < E_TABSZ ; i++)
-		inbuf[i] = UNI_DIRECT_BASE | ubuf[i];
+	for (i = 0; i < ARRAY_SIZE(inbuf); i++) {
+		if (get_user(ch, &arg[i]))
+			return -EFAULT;
+		inbuf[i] = UNI_DIRECT_BASE | ch;
+	}
 
 	console_lock();
 	memcpy(translations[USER_MAP], inbuf, sizeof(inbuf));
@@ -345,7 +375,7 @@ int con_get_trans_old(unsigned char __user * arg)
 	unsigned char outbuf[E_TABSZ];
 
 	console_lock();
-	for (i = 0; i < E_TABSZ ; i++)
+	for (i = 0; i < ARRAY_SIZE(outbuf); i++)
 	{
 		ch = conv_uni_to_pc(vc_cons[fg_console].d, p[i]);
 		outbuf[i] = (ch & ~0xff) ? 0 : ch;
@@ -381,7 +411,7 @@ int con_get_trans_new(ushort __user * arg)
 }
 
 /*
- * Unicode -> current font conversion 
+ * Unicode -> current font conversion
  *
  * A font has at most 512 chars, usually 256.
  * But one font position may represent several Unicode chars.
@@ -393,78 +423,82 @@ int con_get_trans_new(ushort __user * arg)
 extern u8 dfont_unicount[];	/* Defined in console_defmap.c */
 extern u16 dfont_unitable[];
 
-static void con_release_unimap(struct uni_pagedir *p)
+static void con_release_unimap(struct uni_pagedict *dict)
 {
-	u16 **p1;
-	int i, j;
+	unsigned int d, r;
 
-	if (p == dflt) dflt = NULL;  
-	for (i = 0; i < 32; i++) {
-		p1 = p->uni_pgdir[i];
-		if (p1 != NULL) {
-			for (j = 0; j < 32; j++)
-				kfree(p1[j]);
-			kfree(p1);
+	if (dict == dflt)
+		dflt = NULL;
+
+	for (d = 0; d < UNI_DIRS; d++) {
+		u16 **dir = dict->uni_pgdir[d];
+		if (dir != NULL) {
+			for (r = 0; r < UNI_DIR_ROWS; r++)
+				kfree(dir[r]);
+			kfree(dir);
 		}
-		p->uni_pgdir[i] = NULL;
+		dict->uni_pgdir[d] = NULL;
 	}
-	for (i = 0; i < 4; i++) {
-		kfree(p->inverse_translations[i]);
-		p->inverse_translations[i] = NULL;
+
+	for (r = 0; r < ARRAY_SIZE(dict->inverse_translations); r++) {
+		kfree(dict->inverse_translations[r]);
+		dict->inverse_translations[r] = NULL;
 	}
-	kfree(p->inverse_trans_unicode);
-	p->inverse_trans_unicode = NULL;
+
+	kfree(dict->inverse_trans_unicode);
+	dict->inverse_trans_unicode = NULL;
 }
 
 /* Caller must hold the console lock */
 void con_free_unimap(struct vc_data *vc)
 {
-	struct uni_pagedir *p;
+	struct uni_pagedict *p;
 
-	p = *vc->vc_uni_pagedir_loc;
+	p = *vc->uni_pagedict_loc;
 	if (!p)
 		return;
-	*vc->vc_uni_pagedir_loc = NULL;
+	*vc->uni_pagedict_loc = NULL;
 	if (--p->refcount)
 		return;
 	con_release_unimap(p);
 	kfree(p);
 }
-  
-static int con_unify_unimap(struct vc_data *conp, struct uni_pagedir *p)
+
+static int con_unify_unimap(struct vc_data *conp, struct uni_pagedict *dict1)
 {
-	int i, j, k;
-	struct uni_pagedir *q;
-	
-	for (i = 0; i < MAX_NR_CONSOLES; i++) {
-		if (!vc_cons_allocated(i))
+	struct uni_pagedict *dict2;
+	unsigned int cons, d, r;
+
+	for (cons = 0; cons < MAX_NR_CONSOLES; cons++) {
+		if (!vc_cons_allocated(cons))
 			continue;
-		q = *vc_cons[i].d->vc_uni_pagedir_loc;
-		if (!q || q == p || q->sum != p->sum)
+		dict2 = *vc_cons[cons].d->uni_pagedict_loc;
+		if (!dict2 || dict2 == dict1 || dict2->sum != dict1->sum)
 			continue;
-		for (j = 0; j < 32; j++) {
-			u16 **p1, **q1;
-			p1 = p->uni_pgdir[j]; q1 = q->uni_pgdir[j];
-			if (!p1 && !q1)
+		for (d = 0; d < UNI_DIRS; d++) {
+			u16 **dir1 = dict1->uni_pgdir[d];
+			u16 **dir2 = dict2->uni_pgdir[d];
+			if (!dir1 && !dir2)
 				continue;
-			if (!p1 || !q1)
+			if (!dir1 || !dir2)
 				break;
-			for (k = 0; k < 32; k++) {
-				if (!p1[k] && !q1[k])
+			for (r = 0; r < UNI_DIR_ROWS; r++) {
+				if (!dir1[r] && !dir2[r])
 					continue;
-				if (!p1[k] || !q1[k])
+				if (!dir1[r] || !dir2[r])
 					break;
-				if (memcmp(p1[k], q1[k], 64*sizeof(u16)))
+				if (memcmp(dir1[r], dir2[r], UNI_ROW_GLYPHS *
+							sizeof(*dir1[r])))
 					break;
 			}
-			if (k < 32)
+			if (r < UNI_DIR_ROWS)
 				break;
 		}
-		if (j == 32) {
-			q->refcount++;
-			*conp->vc_uni_pagedir_loc = q;
-			con_release_unimap(p);
-			kfree(p);
+		if (d == UNI_DIRS) {
+			dict2->refcount++;
+			*conp->uni_pagedict_loc = dict2;
+			con_release_unimap(dict1);
+			kfree(dict1);
 			return 1;
 		}
 	}
@@ -472,55 +506,66 @@ static int con_unify_unimap(struct vc_data *conp, struct uni_pagedir *p)
 }
 
 static int
-con_insert_unipair(struct uni_pagedir *p, u_short unicode, u_short fontpos)
+con_insert_unipair(struct uni_pagedict *p, u_short unicode, u_short fontpos)
 {
-	int i, n;
-	u16 **p1, *p2;
+	u16 **dir, *row;
+	unsigned int n;
 
-	p1 = p->uni_pgdir[n = unicode >> 11];
-	if (!p1) {
-		p1 = p->uni_pgdir[n] = kmalloc_array(32, sizeof(u16 *),
-						     GFP_KERNEL);
-		if (!p1) return -ENOMEM;
-		for (i = 0; i < 32; i++)
-			p1[i] = NULL;
+	n = UNI_DIR(unicode);
+	dir = p->uni_pgdir[n];
+	if (!dir) {
+		dir = p->uni_pgdir[n] = kcalloc(UNI_DIR_ROWS, sizeof(*dir),
+				GFP_KERNEL);
+		if (!dir)
+			return -ENOMEM;
 	}
 
-	p2 = p1[n = (unicode >> 6) & 0x1f];
-	if (!p2) {
-		p2 = p1[n] = kmalloc_array(64, sizeof(u16), GFP_KERNEL);
-		if (!p2) return -ENOMEM;
-		memset(p2, 0xff, 64*sizeof(u16)); /* No glyphs for the characters (yet) */
+	n = UNI_ROW(unicode);
+	row = dir[n];
+	if (!row) {
+		row = dir[n] = kmalloc_array(UNI_ROW_GLYPHS, sizeof(*row),
+				GFP_KERNEL);
+		if (!row)
+			return -ENOMEM;
+		/* No glyphs for the characters (yet) */
+		memset(row, 0xff, UNI_ROW_GLYPHS * sizeof(*row));
 	}
 
-	p2[unicode & 0x3f] = fontpos;
-	
+	row[UNI_GLYPH(unicode)] = fontpos;
+
 	p->sum += (fontpos << 20U) + unicode;
 
 	return 0;
 }
 
+static int con_allocate_new(struct vc_data *vc)
+{
+	struct uni_pagedict *new, *old = *vc->uni_pagedict_loc;
+
+	new = kzalloc(sizeof(*new), GFP_KERNEL);
+	if (!new)
+		return -ENOMEM;
+
+	new->refcount = 1;
+	*vc->uni_pagedict_loc = new;
+
+	if (old)
+		old->refcount--;
+
+	return 0;
+}
+
 /* Caller must hold the lock */
 static int con_do_clear_unimap(struct vc_data *vc)
 {
-	struct uni_pagedir *p, *q;
+	struct uni_pagedict *old = *vc->uni_pagedict_loc;
 
-	p = *vc->vc_uni_pagedir_loc;
-	if (!p || --p->refcount) {
-		q = kzalloc(sizeof(*p), GFP_KERNEL);
-		if (!q) {
-			if (p)
-				p->refcount++;
-			return -ENOMEM;
-		}
-		q->refcount=1;
-		*vc->vc_uni_pagedir_loc = q;
-	} else {
-		if (p == dflt) dflt = NULL;
-		p->refcount++;
-		p->sum = 0;
-		con_release_unimap(p);
-	}
+	if (!old || old->refcount > 1)
+		return con_allocate_new(vc);
+
+	old->sum = 0;
+	con_release_unimap(old);
+
 	return 0;
 }
 
@@ -532,91 +577,93 @@ int con_clear_unimap(struct vc_data *vc)
 	console_unlock();
 	return ret;
 }
-	
+
+static struct uni_pagedict *con_unshare_unimap(struct vc_data *vc,
+		struct uni_pagedict *old)
+{
+	struct uni_pagedict *new;
+	unsigned int d, r, g;
+	int ret;
+	u16 uni = 0;
+
+	ret = con_allocate_new(vc);
+	if (ret)
+		return ERR_PTR(ret);
+
+	new = *vc->uni_pagedict_loc;
+
+	/*
+	 * uni_pgdir is a 32*32*64 table with rows allocated when its first
+	 * entry is added. The unicode value must still be incremented for
+	 * empty rows. We are copying entries from "old" to "new".
+	 */
+	for (d = 0; d < UNI_DIRS; d++) {
+		u16 **dir = old->uni_pgdir[d];
+		if (!dir) {
+			/* Account for empty table */
+			uni += UNI_DIR_ROWS * UNI_ROW_GLYPHS;
+			continue;
+		}
+
+		for (r = 0; r < UNI_DIR_ROWS; r++) {
+			u16 *row = dir[r];
+			if (!row) {
+				/* Account for row of 64 empty entries */
+				uni += UNI_ROW_GLYPHS;
+				continue;
+			}
+
+			for (g = 0; g < UNI_ROW_GLYPHS; g++, uni++) {
+				if (row[g] == 0xffff)
+					continue;
+				/*
+				 * Found one, copy entry for unicode uni with
+				 * fontpos value row[g].
+				 */
+				ret = con_insert_unipair(new, uni, row[g]);
+				if (ret) {
+					old->refcount++;
+					*vc->uni_pagedict_loc = old;
+					con_release_unimap(new);
+					kfree(new);
+					return ERR_PTR(ret);
+				}
+			}
+		}
+	}
+
+	return new;
+}
+
 int con_set_unimap(struct vc_data *vc, ushort ct, struct unipair __user *list)
 {
-	int err = 0, err1, i;
-	struct uni_pagedir *p, *q;
+	int err = 0, err1;
+	struct uni_pagedict *dict;
 	struct unipair *unilist, *plist;
 
 	if (!ct)
 		return 0;
 
-	unilist = vmemdup_user(list, array_size(sizeof(struct unipair), ct));
+	unilist = vmemdup_user(list, array_size(sizeof(*unilist), ct));
 	if (IS_ERR(unilist))
 		return PTR_ERR(unilist);
 
 	console_lock();
 
 	/* Save original vc_unipagdir_loc in case we allocate a new one */
-	p = *vc->vc_uni_pagedir_loc;
-
-	if (!p) {
+	dict = *vc->uni_pagedict_loc;
+	if (!dict) {
 		err = -EINVAL;
-
 		goto out_unlock;
 	}
-	
-	if (p->refcount > 1) {
-		int j, k;
-		u16 **p1, *p2, l;
-		
-		err1 = con_do_clear_unimap(vc);
-		if (err1) {
-			err = err1;
+
+	if (dict->refcount > 1) {
+		dict = con_unshare_unimap(vc, dict);
+		if (IS_ERR(dict)) {
+			err = PTR_ERR(dict);
 			goto out_unlock;
 		}
-		
-		/*
-		 * Since refcount was > 1, con_clear_unimap() allocated a
-		 * a new uni_pagedir for this vc.  Re: p != q
-		 */
-		q = *vc->vc_uni_pagedir_loc;
-
-		/*
-		 * uni_pgdir is a 32*32*64 table with rows allocated
-		 * when its first entry is added.  The unicode value must
-		 * still be incremented for empty rows.  We are copying
-		 * entries from "p" (old) to "q" (new).
-		 */
-		l = 0;		/* unicode value */
-		for (i = 0; i < 32; i++) {
-		p1 = p->uni_pgdir[i];
-		if (p1)
-			for (j = 0; j < 32; j++) {
-			p2 = p1[j];
-			if (p2) {
-				for (k = 0; k < 64; k++, l++)
-				if (p2[k] != 0xffff) {
-					/*
-					 * Found one, copy entry for unicode
-					 * l with fontpos value p2[k].
-					 */
-					err1 = con_insert_unipair(q, l, p2[k]);
-					if (err1) {
-						p->refcount++;
-						*vc->vc_uni_pagedir_loc = p;
-						con_release_unimap(q);
-						kfree(q);
-						err = err1;
-						goto out_unlock;
-					}
-				}
-			} else {
-				/* Account for row of 64 empty entries */
-				l += 64;
-			}
-		}
-		else
-			/* Account for empty table */
-			l += 32 * 64;
-		}
-
-		/*
-		 * Finished copying font table, set vc_uni_pagedir to new table
-		 */
-		p = q;
-	} else if (p == dflt) {
+	} else if (dict == dflt) {
 		dflt = NULL;
 	}
 
@@ -624,20 +671,20 @@ int con_set_unimap(struct vc_data *vc, ushort ct, struct unipair __user *list)
 	 * Insert user specified unicode pairs into new table.
 	 */
 	for (plist = unilist; ct; ct--, plist++) {
-		err1 = con_insert_unipair(p, plist->unicode, plist->fontpos);
+		err1 = con_insert_unipair(dict, plist->unicode, plist->fontpos);
 		if (err1)
 			err = err1;
 	}
-	
+
 	/*
 	 * Merge with fontmaps of any other virtual consoles.
 	 */
-	if (con_unify_unimap(vc, p))
+	if (con_unify_unimap(vc, dict))
 		goto out_unlock;
 
-	for (i = 0; i <= 3; i++)
-		set_inverse_transl(vc, p, i); /* Update inverse translations */
-	set_inverse_trans_unicode(vc, p);
+	for (enum translation_map m = FIRST_MAP; m <= LAST_MAP; m++)
+		set_inverse_transl(vc, dict, m);
+	set_inverse_trans_unicode(dict);
 
 out_unlock:
 	console_unlock();
@@ -652,55 +699,56 @@ int con_set_unimap(struct vc_data *vc, ushort ct, struct unipair __user *list)
  *	Loads the unimap for the hardware font, as defined in uni_hash.tbl.
  *	The representation used was the most compact I could come up
  *	with.  This routine is executed at video setup, and when the
- *	PIO_FONTRESET ioctl is called. 
+ *	PIO_FONTRESET ioctl is called.
  *
  *	The caller must hold the console lock
  */
 int con_set_default_unimap(struct vc_data *vc)
 {
-	int i, j, err = 0, err1;
-	u16 *q;
-	struct uni_pagedir *p;
+	struct uni_pagedict *dict;
+	unsigned int fontpos, count;
+	int err = 0, err1;
+	u16 *dfont;
 
 	if (dflt) {
-		p = *vc->vc_uni_pagedir_loc;
-		if (p == dflt)
+		dict = *vc->uni_pagedict_loc;
+		if (dict == dflt)
 			return 0;
 
 		dflt->refcount++;
-		*vc->vc_uni_pagedir_loc = dflt;
-		if (p && !--p->refcount) {
-			con_release_unimap(p);
-			kfree(p);
+		*vc->uni_pagedict_loc = dflt;
+		if (dict && !--dict->refcount) {
+			con_release_unimap(dict);
+			kfree(dict);
 		}
 		return 0;
 	}
-	
+
 	/* The default font is always 256 characters */
 
 	err = con_do_clear_unimap(vc);
 	if (err)
 		return err;
-    
-	p = *vc->vc_uni_pagedir_loc;
-	q = dfont_unitable;
-	
-	for (i = 0; i < 256; i++)
-		for (j = dfont_unicount[i]; j; j--) {
-			err1 = con_insert_unipair(p, *(q++), i);
+
+	dict = *vc->uni_pagedict_loc;
+	dfont = dfont_unitable;
+
+	for (fontpos = 0; fontpos < 256U; fontpos++)
+		for (count = dfont_unicount[fontpos]; count; count--) {
+			err1 = con_insert_unipair(dict, *(dfont++), fontpos);
 			if (err1)
 				err = err1;
 		}
-			
-	if (con_unify_unimap(vc, p)) {
-		dflt = *vc->vc_uni_pagedir_loc;
+
+	if (con_unify_unimap(vc, dict)) {
+		dflt = *vc->uni_pagedict_loc;
 		return err;
 	}
 
-	for (i = 0; i <= 3; i++)
-		set_inverse_transl(vc, p, i);	/* Update all inverse translations */
-	set_inverse_trans_unicode(vc, p);
-	dflt = p;
+	for (enum translation_map m = FIRST_MAP; m <= LAST_MAP; m++)
+		set_inverse_transl(vc, dict, m);
+	set_inverse_trans_unicode(dict);
+	dflt = dict;
 	return err;
 }
 EXPORT_SYMBOL(con_set_default_unimap);
@@ -714,16 +762,16 @@ EXPORT_SYMBOL(con_set_default_unimap);
  */
 int con_copy_unimap(struct vc_data *dst_vc, struct vc_data *src_vc)
 {
-	struct uni_pagedir *q;
+	struct uni_pagedict *src;
 
-	if (!*src_vc->vc_uni_pagedir_loc)
+	if (!*src_vc->uni_pagedict_loc)
 		return -EINVAL;
-	if (*dst_vc->vc_uni_pagedir_loc == *src_vc->vc_uni_pagedir_loc)
+	if (*dst_vc->uni_pagedict_loc == *src_vc->uni_pagedict_loc)
 		return 0;
 	con_free_unimap(dst_vc);
-	q = *src_vc->vc_uni_pagedir_loc;
-	q->refcount++;
-	*dst_vc->vc_uni_pagedir_loc = q;
+	src = *src_vc->uni_pagedict_loc;
+	src->refcount++;
+	*dst_vc->uni_pagedict_loc = src;
 	return 0;
 }
 EXPORT_SYMBOL(con_copy_unimap);
@@ -734,46 +782,53 @@ EXPORT_SYMBOL(con_copy_unimap);
  *	Read the console unicode data for this console. Called from the ioctl
  *	handlers.
  */
-int con_get_unimap(struct vc_data *vc, ushort ct, ushort __user *uct, struct unipair __user *list)
+int con_get_unimap(struct vc_data *vc, ushort ct, ushort __user *uct,
+		struct unipair __user *list)
 {
-	int i, j, k, ret = 0;
 	ushort ect;
-	u16 **p1, *p2;
-	struct uni_pagedir *p;
+	struct uni_pagedict *dict;
 	struct unipair *unilist;
+	unsigned int d, r, g;
+	int ret = 0;
 
-	unilist = kvmalloc_array(ct, sizeof(struct unipair), GFP_KERNEL);
+	unilist = kvmalloc_array(ct, sizeof(*unilist), GFP_KERNEL);
 	if (!unilist)
 		return -ENOMEM;
 
 	console_lock();
 
 	ect = 0;
-	if (*vc->vc_uni_pagedir_loc) {
-		p = *vc->vc_uni_pagedir_loc;
-		for (i = 0; i < 32; i++) {
-		p1 = p->uni_pgdir[i];
-		if (p1)
-			for (j = 0; j < 32; j++) {
-			p2 = *(p1++);
-			if (p2)
-				for (k = 0; k < 64; k++, p2++) {
-					if (*p2 >= MAX_GLYPH)
-						continue;
-					if (ect < ct) {
-						unilist[ect].unicode =
-							(i<<11)+(j<<6)+k;
-						unilist[ect].fontpos = *p2;
-					}
-					ect++;
+	dict = *vc->uni_pagedict_loc;
+	if (!dict)
+		goto unlock;
+
+	for (d = 0; d < UNI_DIRS; d++) {
+		u16 **dir = dict->uni_pgdir[d];
+		if (!dir)
+			continue;
+
+		for (r = 0; r < UNI_DIR_ROWS; r++) {
+			u16 *row = dir[r];
+			if (!row)
+				continue;
+
+			for (g = 0; g < UNI_ROW_GLYPHS; g++, row++) {
+				if (*row >= MAX_GLYPH)
+					continue;
+				if (ect < ct) {
+					unilist[ect].unicode = UNI(d, r, g);
+					unilist[ect].fontpos = *row;
 				}
+				ect++;
 			}
 		}
 	}
+unlock:
 	console_unlock();
-	if (copy_to_user(list, unilist, min(ect, ct) * sizeof(struct unipair)))
+	if (copy_to_user(list, unilist, min(ect, ct) * sizeof(*unilist)))
 		ret = -EFAULT;
-	put_user(ect, uct);
+	if (put_user(ect, uct))
+		ret = -EFAULT;
 	kvfree(unilist);
 	return ret ? ret : (ect <= ct) ? 0 : -ENOMEM;
 }
@@ -798,20 +853,18 @@ u32 conv_8bit_to_uni(unsigned char c)
 int conv_uni_to_8bit(u32 uni)
 {
 	int c;
-	for (c = 0; c < 0x100; c++)
+	for (c = 0; c < ARRAY_SIZE(translations[USER_MAP]); c++)
 		if (translations[USER_MAP][c] == uni ||
 		   (translations[USER_MAP][c] == (c | 0xf000) && uni == c))
 			return c;
 	return -1;
 }
 
-int
-conv_uni_to_pc(struct vc_data *conp, long ucs) 
+int conv_uni_to_pc(struct vc_data *conp, long ucs)
 {
-	int h;
-	u16 **p1, *p2;
-	struct uni_pagedir *p;
-  
+	struct uni_pagedict *dict;
+	u16 **dir, *row, glyph;
+
 	/* Only 16-bit codes supported at this time */
 	if (ucs > 0xffff)
 		return -4;		/* Not found */
@@ -826,17 +879,24 @@ conv_uni_to_pc(struct vc_data *conp, long ucs)
 	 */
 	else if ((ucs & ~UNI_DIRECT_MASK) == UNI_DIRECT_BASE)
 		return ucs & UNI_DIRECT_MASK;
-  
-	if (!*conp->vc_uni_pagedir_loc)
+
+	dict = *conp->uni_pagedict_loc;
+	if (!dict)
 		return -3;
 
-	p = *conp->vc_uni_pagedir_loc;
-	if ((p1 = p->uni_pgdir[ucs >> 11]) &&
-	    (p2 = p1[(ucs >> 6) & 0x1f]) &&
-	    (h = p2[ucs & 0x3f]) < MAX_GLYPH)
-		return h;
+	dir = dict->uni_pgdir[UNI_DIR(ucs)];
+	if (!dir)
+		return -4;
 
-	return -4;		/* not found */
+	row = dir[UNI_ROW(ucs)];
+	if (!row)
+		return -4;
+
+	glyph = row[UNI_GLYPH(ucs)];
+	if (glyph >= MAX_GLYPH)
+		return -4;
+
+	return glyph;
 }
 
 /*
@@ -844,13 +904,13 @@ conv_uni_to_pc(struct vc_data *conp, long ucs)
  * initialized.  It must be possible to call kmalloc(..., GFP_KERNEL)
  * from this function, hence the call from sys_setup.
  */
-void __init 
+void __init
 console_map_init(void)
 {
 	int i;
-	
+
 	for (i = 0; i < MAX_NR_CONSOLES; i++)
-		if (vc_cons_allocated(i) && !*vc_cons[i].d->vc_uni_pagedir_loc)
+		if (vc_cons_allocated(i) && !*vc_cons[i].d->uni_pagedict_loc)
 			con_set_default_unimap(vc_cons[i].d);
 }
 
diff --git a/drivers/tty/vt/defkeymap.c_shipped b/drivers/tty/vt/defkeymap.c_shipped
index 094d95b..0c043e4 100644
--- a/drivers/tty/vt/defkeymap.c_shipped
+++ b/drivers/tty/vt/defkeymap.c_shipped
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
-/* Do not edit this file! It was automatically generated by   */
-/*    loadkeys --mktable defkeymap.map > defkeymap.c          */
+/* Do not edit this file! It was automatically generated by     */
+/*    loadkeys --mktable --unicode defkeymap.map > defkeymap.c  */
 
 #include <linux/types.h>
 #include <linux/keyboard.h>
@@ -139,7 +139,7 @@
 	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,
 };
 
-ushort *key_maps[MAX_NR_KEYMAPS] = {
+unsigned short *key_maps[MAX_NR_KEYMAPS] = {
 	plain_map, shift_map, altgr_map, NULL,
 	ctrl_map, shift_ctrl_map, NULL, NULL,
 	alt_map, NULL, NULL, NULL,
diff --git a/drivers/tty/vt/selection.c b/drivers/tty/vt/selection.c
index f7755e7..6ef22f0 100644
--- a/drivers/tty/vt/selection.c
+++ b/drivers/tty/vt/selection.c
@@ -68,7 +68,8 @@ sel_pos(int n, bool unicode)
 {
 	if (unicode)
 		return screen_glyph_unicode(vc_sel.cons, n / 2);
-	return inverse_translate(vc_sel.cons, screen_glyph(vc_sel.cons, n), 0);
+	return inverse_translate(vc_sel.cons, screen_glyph(vc_sel.cons, n),
+			false);
 }
 
 /**
diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index dfc1f4b..ae9c926 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -344,7 +344,7 @@ static struct uni_screen *vc_uniscr_alloc(unsigned int cols, unsigned int rows)
 	/* allocate everything in one go */
 	memsize = cols * rows * sizeof(char32_t);
 	memsize += rows * sizeof(char32_t *);
-	p = vmalloc(memsize);
+	p = vzalloc(memsize);
 	if (!p)
 		return NULL;
 
@@ -1063,10 +1063,10 @@ static void visual_init(struct vc_data *vc, int num, int init)
 	__module_get(vc->vc_sw->owner);
 	vc->vc_num = num;
 	vc->vc_display_fg = &master_display_fg;
-	if (vc->vc_uni_pagedir_loc)
+	if (vc->uni_pagedict_loc)
 		con_free_unimap(vc);
-	vc->vc_uni_pagedir_loc = &vc->vc_uni_pagedir;
-	vc->vc_uni_pagedir = NULL;
+	vc->uni_pagedict_loc = &vc->uni_pagedict;
+	vc->uni_pagedict = NULL;
 	vc->vc_hi_font_mask = 0;
 	vc->vc_complement_mask = 0;
 	vc->vc_can_do_color = 0;
@@ -1136,7 +1136,7 @@ int vc_allocate(unsigned int currcons)	/* return 0 on success */
 
 	visual_init(vc, currcons, 1);
 
-	if (!*vc->vc_uni_pagedir_loc)
+	if (!*vc->uni_pagedict_loc)
 		con_set_default_unimap(vc);
 
 	err = -EINVAL;
@@ -3939,7 +3939,7 @@ static ssize_t show_bind(struct device *dev, struct device_attribute *attr,
 	bind = con_is_bound(con->con);
 	console_unlock();
 
-	return snprintf(buf, PAGE_SIZE, "%i\n", bind);
+	return sysfs_emit(buf, "%i\n", bind);
 }
 
 static ssize_t show_name(struct device *dev, struct device_attribute *attr,
@@ -3947,7 +3947,7 @@ static ssize_t show_name(struct device *dev, struct device_attribute *attr,
 {
 	struct con_driver *con = dev_get_drvdata(dev);
 
-	return snprintf(buf, PAGE_SIZE, "%s %s\n",
+	return sysfs_emit(buf, "%s %s\n",
 			(con->flag & CON_DRIVER_FLAG_MODULE) ? "(M)" : "(S)",
 			 con->desc);
 
@@ -4741,7 +4741,7 @@ u32 screen_glyph_unicode(const struct vc_data *vc, int n)
 
 	if (uniscr)
 		return uniscr->lines[n / vc->vc_cols][n % vc->vc_cols];
-	return inverse_translate(vc, screen_glyph(vc, n * 2), 1);
+	return inverse_translate(vc, screen_glyph(vc, n * 2), true);
 }
 EXPORT_SYMBOL_GPL(screen_glyph_unicode);
 
diff --git a/drivers/usb/misc/sisusbvga/sisusb_con.c b/drivers/usb/misc/sisusbvga/sisusb_con.c
index dfa0d5c..fcb95fb 100644
--- a/drivers/usb/misc/sisusbvga/sisusb_con.c
+++ b/drivers/usb/misc/sisusbvga/sisusb_con.c
@@ -248,7 +248,7 @@ sisusbcon_init(struct vc_data *c, int init)
 	 */
 	kref_get(&sisusb->kref);
 
-	if (!*c->vc_uni_pagedir_loc)
+	if (!*c->uni_pagedict_loc)
 		con_set_default_unimap(c);
 
 	mutex_unlock(&sisusb->lock);
diff --git a/drivers/video/console/vgacon.c b/drivers/video/console/vgacon.c
index 576612f..fcdf017 100644
--- a/drivers/video/console/vgacon.c
+++ b/drivers/video/console/vgacon.c
@@ -75,7 +75,7 @@ static void vgacon_scrolldelta(struct vc_data *c, int lines);
 static int vgacon_set_origin(struct vc_data *c);
 static void vgacon_save_screen(struct vc_data *c);
 static void vgacon_invert_region(struct vc_data *c, u16 * p, int count);
-static struct uni_pagedir *vgacon_uni_pagedir;
+static struct uni_pagedict *vgacon_uni_pagedir;
 static int vgacon_refcount;
 
 /* Description of the hardware situation */
@@ -342,7 +342,7 @@ static const char *vgacon_startup(void)
 
 static void vgacon_init(struct vc_data *c, int init)
 {
-	struct uni_pagedir *p;
+	struct uni_pagedict *p;
 
 	/*
 	 * We cannot be loaded as a module, therefore init will be 1
@@ -367,10 +367,10 @@ static void vgacon_init(struct vc_data *c, int init)
 	c->vc_complement_mask = 0x7700;
 	if (vga_512_chars)
 		c->vc_hi_font_mask = 0x0800;
-	p = *c->vc_uni_pagedir_loc;
-	if (c->vc_uni_pagedir_loc != &vgacon_uni_pagedir) {
+	p = *c->uni_pagedict_loc;
+	if (c->uni_pagedict_loc != &vgacon_uni_pagedir) {
 		con_free_unimap(c);
-		c->vc_uni_pagedir_loc = &vgacon_uni_pagedir;
+		c->uni_pagedict_loc = &vgacon_uni_pagedir;
 		vgacon_refcount++;
 	}
 	if (!vgacon_uni_pagedir && p)
@@ -392,7 +392,7 @@ static void vgacon_deinit(struct vc_data *c)
 
 	if (!--vgacon_refcount)
 		con_free_unimap(c);
-	c->vc_uni_pagedir_loc = &c->vc_uni_pagedir;
+	c->uni_pagedict_loc = &c->uni_pagedict;
 	con_set_default_unimap(c);
 }
 
diff --git a/drivers/video/fbdev/core/fbcon.c b/drivers/video/fbdev/core/fbcon.c
index f114242b..cf9ac4d 100644
--- a/drivers/video/fbdev/core/fbcon.c
+++ b/drivers/video/fbdev/core/fbcon.c
@@ -1060,9 +1060,9 @@ static void fbcon_init(struct vc_data *vc, int init)
 			vc->vc_complement_mask <<= 1;
 	}
 
-	if (!*svc->vc_uni_pagedir_loc)
+	if (!*svc->uni_pagedict_loc)
 		con_set_default_unimap(svc);
-	if (!*vc->vc_uni_pagedir_loc)
+	if (!*vc->uni_pagedict_loc)
 		con_copy_unimap(vc, svc);
 
 	ops = info->fbcon_par;
@@ -1384,9 +1384,9 @@ static void fbcon_set_disp(struct fb_info *info, struct fb_var_screeninfo *var,
 			vc->vc_complement_mask <<= 1;
 	}
 
-	if (!*svc->vc_uni_pagedir_loc)
+	if (!*svc->uni_pagedict_loc)
 		con_set_default_unimap(svc);
-	if (!*vc->vc_uni_pagedir_loc)
+	if (!*vc->uni_pagedict_loc)
 		con_copy_unimap(vc, svc);
 
 	cols = FBCON_SWAP(ops->rotate, info->var.xres, info->var.yres);
diff --git a/include/linux/console_struct.h b/include/linux/console_struct.h
index d5b9c8d..1518568 100644
--- a/include/linux/console_struct.h
+++ b/include/linux/console_struct.h
@@ -17,7 +17,7 @@
 #include <linux/vt.h>
 #include <linux/workqueue.h>
 
-struct uni_pagedir;
+struct uni_pagedict;
 struct uni_screen;
 
 #define NPAR 16
@@ -157,8 +157,8 @@ struct vc_data {
 	unsigned int	vc_bell_duration;	/* Console bell duration */
 	unsigned short	vc_cur_blink_ms;	/* Cursor blink duration */
 	struct vc_data **vc_display_fg;		/* [!] Ptr to var holding fg console for this display */
-	struct uni_pagedir *vc_uni_pagedir;
-	struct uni_pagedir **vc_uni_pagedir_loc; /* [!] Location of uni_pagedir variable for this console */
+	struct uni_pagedict *uni_pagedict;
+	struct uni_pagedict **uni_pagedict_loc; /* [!] Location of uni_pagedict variable for this console */
 	struct uni_screen *vc_uni_screen;	/* unicode screen content */
 	/* additional information is in vt_kern.h */
 };
diff --git a/include/linux/consolemap.h b/include/linux/consolemap.h
index bcfce74..c35db48 100644
--- a/include/linux/consolemap.h
+++ b/include/linux/consolemap.h
@@ -7,30 +7,56 @@
 #ifndef __LINUX_CONSOLEMAP_H__
 #define __LINUX_CONSOLEMAP_H__
 
-#define LAT1_MAP 0
-#define GRAF_MAP 1
-#define IBMPC_MAP 2
-#define USER_MAP 3
+enum translation_map {
+	LAT1_MAP,
+	GRAF_MAP,
+	IBMPC_MAP,
+	USER_MAP,
+
+	FIRST_MAP = LAT1_MAP,
+	LAST_MAP = USER_MAP,
+};
 
 #include <linux/types.h>
 
-#ifdef CONFIG_CONSOLE_TRANSLATIONS
 struct vc_data;
 
-extern u16 inverse_translate(const struct vc_data *conp, int glyph,
-		int use_unicode);
-extern unsigned short *set_translate(int m, struct vc_data *vc);
-extern int conv_uni_to_pc(struct vc_data *conp, long ucs);
-extern u32 conv_8bit_to_uni(unsigned char c);
-extern int conv_uni_to_8bit(u32 uni);
+#ifdef CONFIG_CONSOLE_TRANSLATIONS
+u16 inverse_translate(const struct vc_data *conp, u16 glyph, bool use_unicode);
+unsigned short *set_translate(enum translation_map m, struct vc_data *vc);
+int conv_uni_to_pc(struct vc_data *conp, long ucs);
+u32 conv_8bit_to_uni(unsigned char c);
+int conv_uni_to_8bit(u32 uni);
 void console_map_init(void);
 #else
-#define inverse_translate(conp, glyph, uni) ((uint16_t)glyph)
-#define set_translate(m, vc) ((unsigned short *)NULL)
-#define conv_uni_to_pc(conp, ucs) ((int) (ucs > 0xff ? -1: ucs))
-#define conv_8bit_to_uni(c) ((uint32_t)(c))
-#define conv_uni_to_8bit(c) ((int) ((c) & 0xff))
-#define console_map_init(c) do { ; } while (0)
+static inline u16 inverse_translate(const struct vc_data *conp, u16 glyph,
+		bool use_unicode)
+{
+	return glyph;
+}
+
+static inline unsigned short *set_translate(enum translation_map m,
+		struct vc_data *vc)
+{
+	return NULL;
+}
+
+static inline int conv_uni_to_pc(struct vc_data *conp, long ucs)
+{
+	return ucs > 0xff ? -1 : ucs;
+}
+
+static inline u32 conv_8bit_to_uni(unsigned char c)
+{
+	return c;
+}
+
+static inline int conv_uni_to_8bit(u32 uni)
+{
+	return uni & 0xff;
+}
+
+static inline void console_map_init(void) { }
 #endif /* CONFIG_CONSOLE_TRANSLATIONS */
 
 #endif /* __LINUX_CONSOLEMAP_H__ */
diff --git a/include/linux/serial.h b/include/linux/serial.h
index 0b8b7d7..3d6fe3e 100644
--- a/include/linux/serial.h
+++ b/include/linux/serial.h
@@ -9,12 +9,20 @@
 #ifndef _LINUX_SERIAL_H
 #define _LINUX_SERIAL_H
 
-#include <asm/page.h>
 #include <uapi/linux/serial.h>
+#include <uapi/linux/serial_reg.h>
 
 /* Helper for dealing with UART_LCR_WLEN* defines */
 #define UART_LCR_WLEN(x)	((x) - 5)
 
+/* FIFO and shifting register empty */
+#define UART_LSR_BOTH_EMPTY	(UART_LSR_TEMT | UART_LSR_THRE)
+
+static inline bool uart_lsr_tx_empty(u16 lsr)
+{
+	return (lsr & UART_LSR_BOTH_EMPTY) == UART_LSR_BOTH_EMPTY;
+}
+
 /*
  * Counters of the input lines (CTS, DSR, RI, CD) interrupts
  */
@@ -25,11 +33,6 @@ struct async_icount {
 	__u32	buf_overrun;
 };
 
-/*
- * The size of the serial xmit buffer is 1 page, or 4096 bytes
- */
-#define SERIAL_XMIT_SIZE PAGE_SIZE
-
 #include <linux/compiler.h>
 
 #endif /* _LINUX_SERIAL_H */
diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h
index ff84a3e..8c7b793 100644
--- a/include/linux/serial_8250.h
+++ b/include/linux/serial_8250.h
@@ -119,7 +119,8 @@ struct uart_8250_port {
 	 * be immediately processed.
 	 */
 #define LSR_SAVE_FLAGS UART_LSR_BRK_ERROR_BITS
-	unsigned char		lsr_saved_flags;
+	u16			lsr_saved_flags;
+	u16			lsr_save_mask;
 #define MSR_SAVE_FLAGS UART_MSR_ANY_DELTA
 	unsigned char		msr_saved_flags;
 
@@ -170,8 +171,8 @@ extern void serial8250_do_set_divisor(struct uart_port *port, unsigned int baud,
 				      unsigned int quot_frac);
 extern int fsl8250_handle_irq(struct uart_port *port);
 int serial8250_handle_irq(struct uart_port *port, unsigned int iir);
-unsigned char serial8250_rx_chars(struct uart_8250_port *up, unsigned char lsr);
-void serial8250_read_char(struct uart_8250_port *up, unsigned char lsr);
+u16 serial8250_rx_chars(struct uart_8250_port *up, u16 lsr);
+void serial8250_read_char(struct uart_8250_port *up, u16 lsr);
 void serial8250_tx_chars(struct uart_8250_port *up);
 unsigned int serial8250_modem_status(struct uart_8250_port *up);
 void serial8250_init_port(struct uart_8250_port *up);
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index fde258b..aef3145 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -31,9 +31,336 @@ struct serial_struct;
 struct device;
 struct gpio_desc;
 
-/*
+/**
+ * struct uart_ops -- interface between serial_core and the driver
+ *
  * This structure describes all the operations that can be done on the
- * physical hardware.  See Documentation/driver-api/serial/driver.rst for details.
+ * physical hardware.
+ *
+ * @tx_empty: ``unsigned int ()(struct uart_port *port)``
+ *
+ *	This function tests whether the transmitter fifo and shifter for the
+ *	@port is empty. If it is empty, this function should return
+ *	%TIOCSER_TEMT, otherwise return 0. If the port does not support this
+ *	operation, then it should return %TIOCSER_TEMT.
+ *
+ *	Locking: none.
+ *	Interrupts: caller dependent.
+ *	This call must not sleep
+ *
+ * @set_mctrl: ``void ()(struct uart_port *port, unsigned int mctrl)``
+ *
+ *	This function sets the modem control lines for @port to the state
+ *	described by @mctrl. The relevant bits of @mctrl are:
+ *
+ *		- %TIOCM_RTS	RTS signal.
+ *		- %TIOCM_DTR	DTR signal.
+ *		- %TIOCM_OUT1	OUT1 signal.
+ *		- %TIOCM_OUT2	OUT2 signal.
+ *		- %TIOCM_LOOP	Set the port into loopback mode.
+ *
+ *	If the appropriate bit is set, the signal should be driven
+ *	active.  If the bit is clear, the signal should be driven
+ *	inactive.
+ *
+ *	Locking: @port->lock taken.
+ *	Interrupts: locally disabled.
+ *	This call must not sleep
+ *
+ * @get_mctrl: ``unsigned int ()(struct uart_port *port)``
+ *
+ *	Returns the current state of modem control inputs of @port. The state
+ *	of the outputs should not be returned, since the core keeps track of
+ *	their state. The state information should include:
+ *
+ *		- %TIOCM_CAR	state of DCD signal
+ *		- %TIOCM_CTS	state of CTS signal
+ *		- %TIOCM_DSR	state of DSR signal
+ *		- %TIOCM_RI	state of RI signal
+ *
+ *	The bit is set if the signal is currently driven active.  If
+ *	the port does not support CTS, DCD or DSR, the driver should
+ *	indicate that the signal is permanently active. If RI is
+ *	not available, the signal should not be indicated as active.
+ *
+ *	Locking: @port->lock taken.
+ *	Interrupts: locally disabled.
+ *	This call must not sleep
+ *
+ * @stop_tx: ``void ()(struct uart_port *port)``
+ *
+ *	Stop transmitting characters. This might be due to the CTS line
+ *	becoming inactive or the tty layer indicating we want to stop
+ *	transmission due to an %XOFF character.
+ *
+ *	The driver should stop transmitting characters as soon as possible.
+ *
+ *	Locking: @port->lock taken.
+ *	Interrupts: locally disabled.
+ *	This call must not sleep
+ *
+ * @start_tx: ``void ()(struct uart_port *port)``
+ *
+ *	Start transmitting characters.
+ *
+ *	Locking: @port->lock taken.
+ *	Interrupts: locally disabled.
+ *	This call must not sleep
+ *
+ * @throttle: ``void ()(struct uart_port *port)``
+ *
+ *	Notify the serial driver that input buffers for the line discipline are
+ *	close to full, and it should somehow signal that no more characters
+ *	should be sent to the serial port.
+ *	This will be called only if hardware assisted flow control is enabled.
+ *
+ *	Locking: serialized with @unthrottle() and termios modification by the
+ *	tty layer.
+ *
+ * @unthrottle: ``void ()(struct uart_port *port)``
+ *
+ *	Notify the serial driver that characters can now be sent to the serial
+ *	port without fear of overrunning the input buffers of the line
+ *	disciplines.
+ *
+ *	This will be called only if hardware assisted flow control is enabled.
+ *
+ *	Locking: serialized with @throttle() and termios modification by the
+ *	tty layer.
+ *
+ * @send_xchar: ``void ()(struct uart_port *port, char ch)``
+ *
+ *	Transmit a high priority character, even if the port is stopped. This
+ *	is used to implement XON/XOFF flow control and tcflow(). If the serial
+ *	driver does not implement this function, the tty core will append the
+ *	character to the circular buffer and then call start_tx() / stop_tx()
+ *	to flush the data out.
+ *
+ *	Do not transmit if @ch == '\0' (%__DISABLED_CHAR).
+ *
+ *	Locking: none.
+ *	Interrupts: caller dependent.
+ *
+ * @stop_rx: ``void ()(struct uart_port *port)``
+ *
+ *	Stop receiving characters; the @port is in the process of being closed.
+ *
+ *	Locking: @port->lock taken.
+ *	Interrupts: locally disabled.
+ *	This call must not sleep
+ *
+ * @enable_ms: ``void ()(struct uart_port *port)``
+ *
+ *	Enable the modem status interrupts.
+ *
+ *	This method may be called multiple times. Modem status interrupts
+ *	should be disabled when the @shutdown() method is called.
+ *
+ *	Locking: @port->lock taken.
+ *	Interrupts: locally disabled.
+ *	This call must not sleep
+ *
+ * @break_ctl: ``void ()(struct uart_port *port, int ctl)``
+ *
+ *	Control the transmission of a break signal. If @ctl is nonzero, the
+ *	break signal should be transmitted. The signal should be terminated
+ *	when another call is made with a zero @ctl.
+ *
+ *	Locking: caller holds tty_port->mutex
+ *
+ * @startup: ``int ()(struct uart_port *port)``
+ *
+ *	Grab any interrupt resources and initialise any low level driver state.
+ *	Enable the port for reception. It should not activate RTS nor DTR;
+ *	this will be done via a separate call to @set_mctrl().
+ *
+ *	This method will only be called when the port is initially opened.
+ *
+ *	Locking: port_sem taken.
+ *	Interrupts: globally disabled.
+ *
+ * @shutdown: ``void ()(struct uart_port *port)``
+ *
+ *	Disable the @port, disable any break condition that may be in effect,
+ *	and free any interrupt resources. It should not disable RTS nor DTR;
+ *	this will have already been done via a separate call to @set_mctrl().
+ *
+ *	Drivers must not access @port->state once this call has completed.
+ *
+ *	This method will only be called when there are no more users of this
+ *	@port.
+ *
+ *	Locking: port_sem taken.
+ *	Interrupts: caller dependent.
+ *
+ * @flush_buffer: ``void ()(struct uart_port *port)``
+ *
+ *	Flush any write buffers, reset any DMA state and stop any ongoing DMA
+ *	transfers.
+ *
+ *	This will be called whenever the @port->state->xmit circular buffer is
+ *	cleared.
+ *
+ *	Locking: @port->lock taken.
+ *	Interrupts: locally disabled.
+ *	This call must not sleep
+ *
+ * @set_termios: ``void ()(struct uart_port *port, struct ktermios *new,
+ *			struct ktermios *old)``
+ *
+ *	Change the @port parameters, including word length, parity, stop bits.
+ *	Update @port->read_status_mask and @port->ignore_status_mask to
+ *	indicate the types of events we are interested in receiving. Relevant
+ *	ktermios::c_cflag bits are:
+ *
+ *	- %CSIZE - word size
+ *	- %CSTOPB - 2 stop bits
+ *	- %PARENB - parity enable
+ *	- %PARODD - odd parity (when %PARENB is in force)
+ *	- %ADDRB - address bit (changed through uart_port::rs485_config()).
+ *	- %CREAD - enable reception of characters (if not set, still receive
+ *	  characters from the port, but throw them away).
+ *	- %CRTSCTS - if set, enable CTS status change reporting.
+ *	- %CLOCAL - if not set, enable modem status change reporting.
+ *
+ *	Relevant ktermios::c_iflag bits are:
+ *
+ *	- %INPCK - enable frame and parity error events to be passed to the TTY
+ *	  layer.
+ *	- %BRKINT / %PARMRK - both of these enable break events to be passed to
+ *	  the TTY layer.
+ *	- %IGNPAR - ignore parity and framing errors.
+ *	- %IGNBRK - ignore break errors. If %IGNPAR is also set, ignore overrun
+ *	  errors as well.
+ *
+ *	The interaction of the ktermios::c_iflag bits is as follows (parity
+ *	error given as an example):
+ *
+ *	============ ======= ======= =========================================
+ *	Parity error INPCK   IGNPAR
+ *	============ ======= ======= =========================================
+ *	n/a	     0	     n/a     character received, marked as %TTY_NORMAL
+ *	None	     1	     n/a     character received, marked as %TTY_NORMAL
+ *	Yes	     1	     0	     character received, marked as %TTY_PARITY
+ *	Yes	     1	     1	     character discarded
+ *	============ ======= ======= =========================================
+ *
+ *	Other flags may be used (eg, xon/xoff characters) if your hardware
+ *	supports hardware "soft" flow control.
+ *
+ *	Locking: caller holds tty_port->mutex
+ *	Interrupts: caller dependent.
+ *	This call must not sleep
+ *
+ * @set_ldisc: ``void ()(struct uart_port *port, struct ktermios *termios)``
+ *
+ *	Notifier for discipline change. See
+ *	Documentation/driver-api/tty/tty_ldisc.rst.
+ *
+ *	Locking: caller holds tty_port->mutex
+ *
+ * @pm: ``void ()(struct uart_port *port, unsigned int state,
+ *		 unsigned int oldstate)``
+ *
+ *	Perform any power management related activities on the specified @port.
+ *	@state indicates the new state (defined by enum uart_pm_state),
+ *	@oldstate indicates the previous state.
+ *
+ *	This function should not be used to grab any resources.
+ *
+ *	This will be called when the @port is initially opened and finally
+ *	closed, except when the @port is also the system console. This will
+ *	occur even if %CONFIG_PM is not set.
+ *
+ *	Locking: none.
+ *	Interrupts: caller dependent.
+ *
+ * @type: ``const char *()(struct uart_port *port)``
+ *
+ *	Return a pointer to a string constant describing the specified @port,
+ *	or return %NULL, in which case the string 'unknown' is substituted.
+ *
+ *	Locking: none.
+ *	Interrupts: caller dependent.
+ *
+ * @release_port: ``void ()(struct uart_port *port)``
+ *
+ *	Release any memory and IO region resources currently in use by the
+ *	@port.
+ *
+ *	Locking: none.
+ *	Interrupts: caller dependent.
+ *
+ * @request_port: ``int ()(struct uart_port *port)``
+ *
+ *	Request any memory and IO region resources required by the port. If any
+ *	fail, no resources should be registered when this function returns, and
+ *	it should return -%EBUSY on failure.
+ *
+ *	Locking: none.
+ *	Interrupts: caller dependent.
+ *
+ * @config_port: ``void ()(struct uart_port *port, int type)``
+ *
+ *	Perform any autoconfiguration steps required for the @port. @type
+ *	contains a bit mask of the required configuration. %UART_CONFIG_TYPE
+ *	indicates that the port requires detection and identification.
+ *	@port->type should be set to the type found, or %PORT_UNKNOWN if no
+ *	port was detected.
+ *
+ *	%UART_CONFIG_IRQ indicates autoconfiguration of the interrupt signal,
+ *	which should be probed using standard kernel autoprobing techniques.
+ *	This is not necessary on platforms where ports have interrupts
+ *	internally hard wired (eg, system on a chip implementations).
+ *
+ *	Locking: none.
+ *	Interrupts: caller dependent.
+ *
+ * @verify_port: ``int ()(struct uart_port *port,
+ *			struct serial_struct *serinfo)``
+ *
+ *	Verify the new serial port information contained within @serinfo is
+ *	suitable for this port type.
+ *
+ *	Locking: none.
+ *	Interrupts: caller dependent.
+ *
+ * @ioctl: ``int ()(struct uart_port *port, unsigned int cmd,
+ *		unsigned long arg)``
+ *
+ *	Perform any port specific IOCTLs. IOCTL commands must be defined using
+ *	the standard numbering system found in <asm/ioctl.h>.
+ *
+ *	Locking: none.
+ *	Interrupts: caller dependent.
+ *
+ * @poll_init: ``int ()(struct uart_port *port)``
+ *
+ *	Called by kgdb to perform the minimal hardware initialization needed to
+ *	support @poll_put_char() and @poll_get_char(). Unlike @startup(), this
+ *	should not request interrupts.
+ *
+ *	Locking: %tty_mutex and tty_port->mutex taken.
+ *	Interrupts: n/a.
+ *
+ * @poll_put_char: ``void ()(struct uart_port *port, unsigned char ch)``
+ *
+ *	Called by kgdb to write a single character @ch directly to the serial
+ *	@port. It can and should block until there is space in the TX FIFO.
+ *
+ *	Locking: none.
+ *	Interrupts: caller dependent.
+ *	This call must not sleep
+ *
+ * @poll_get_char: ``int ()(struct uart_port *port)``
+ *
+ *	Called by kgdb to read a single character directly from the serial
+ *	port. If data is available, it should be returned; otherwise the
+ *	function should return %NO_POLL_CHAR immediately.
+ *
+ *	Locking: none.
+ *	Interrupts: caller dependent.
+ *	This call must not sleep
  */
 struct uart_ops {
 	unsigned int	(*tx_empty)(struct uart_port *);
@@ -56,22 +383,8 @@ struct uart_ops {
 	void		(*set_ldisc)(struct uart_port *, struct ktermios *);
 	void		(*pm)(struct uart_port *, unsigned int state,
 			      unsigned int oldstate);
-
-	/*
-	 * Return a string describing the type of the port
-	 */
 	const char	*(*type)(struct uart_port *);
-
-	/*
-	 * Release IO and memory resources used by the port.
-	 * This includes iounmap if necessary.
-	 */
 	void		(*release_port)(struct uart_port *);
-
-	/*
-	 * Request IO and memory resources used by the port.
-	 * This includes iomapping the port if necessary.
-	 */
 	int		(*request_port)(struct uart_port *);
 	void		(*config_port)(struct uart_port *, int);
 	int		(*verify_port)(struct uart_port *, struct serial_struct *);
@@ -133,6 +446,7 @@ struct uart_port {
 				      unsigned int old);
 	void			(*handle_break)(struct uart_port *);
 	int			(*rs485_config)(struct uart_port *,
+						struct ktermios *termios,
 						struct serial_rs485 *rs485);
 	int			(*iso7816_config)(struct uart_port *,
 						  struct serial_iso7816 *iso7816);
@@ -232,7 +546,6 @@ struct uart_port {
 
 	int			hw_stopped;		/* sw-assisted CTS flow state */
 	unsigned int		mctrl;			/* current modem ctrl settings */
-	unsigned int		timeout;		/* character-based timeout */
 	unsigned int		frame_time;		/* frame timing in ns */
 	unsigned int		type;			/* port type */
 	const struct uart_ops	*ops;
@@ -255,6 +568,7 @@ struct uart_port {
 	struct attribute_group	*attr_group;		/* port specific attributes */
 	const struct attribute_group **tty_groups;	/* all attributes (serial core use only) */
 	struct serial_rs485     rs485;
+	struct serial_rs485	rs485_supported;	/* Supported mask for serial_rs485 */
 	struct gpio_desc	*rs485_term_gpio;	/* enable RS485 bus termination */
 	struct serial_iso7816   iso7816;
 	void			*private_data;		/* generic platform data pointer */
@@ -334,10 +648,23 @@ unsigned int uart_get_baud_rate(struct uart_port *port, struct ktermios *termios
 				unsigned int max);
 unsigned int uart_get_divisor(struct uart_port *port, unsigned int baud);
 
+/*
+ * Calculates FIFO drain time.
+ */
+static inline unsigned long uart_fifo_timeout(struct uart_port *port)
+{
+	u64 fifo_timeout = (u64)READ_ONCE(port->frame_time) * port->fifosize;
+
+	/* Add .02 seconds of slop */
+	fifo_timeout += 20 * NSEC_PER_MSEC;
+
+	return max(nsecs_to_jiffies(fifo_timeout), 1UL);
+}
+
 /* Base timer interval for polling */
 static inline int uart_poll_timeout(struct uart_port *port)
 {
-	int timeout = port->timeout;
+	int timeout = uart_fifo_timeout(port);
 
 	return timeout > 6 ? (timeout / 2 - 2) : 1;
 }
@@ -598,4 +925,5 @@ static inline int uart_handle_break(struct uart_port *port)
 					 !((cflag) & CLOCAL))
 
 int uart_get_rs485_mode(struct uart_port *port);
+int uart_rs485_config(struct uart_port *port);
 #endif /* LINUX_SERIAL_CORE_H */
diff --git a/include/linux/serial_s3c.h b/include/linux/serial_s3c.h
index dec15f5..1672cf0 100644
--- a/include/linux/serial_s3c.h
+++ b/include/linux/serial_s3c.h
@@ -83,7 +83,7 @@
 #define S3C2410_UCON_RXIRQMODE	  (1<<0)
 #define S3C2410_UCON_RXFIFO_TOI	  (1<<7)
 #define S3C2443_UCON_RXERR_IRQEN  (1<<6)
-#define S3C2443_UCON_LOOPBACK	  (1<<5)
+#define S3C2410_UCON_LOOPBACK	  (1<<5)
 
 #define S3C2410_UCON_DEFAULT	  (S3C2410_UCON_TXILEVEL  | \
 				   S3C2410_UCON_RXILEVEL  | \
diff --git a/include/linux/tty_buffer.h b/include/linux/tty_buffer.h
index 3b9d776..1796648 100644
--- a/include/linux/tty_buffer.h
+++ b/include/linux/tty_buffer.h
@@ -15,6 +15,7 @@ struct tty_buffer {
 	int used;
 	int size;
 	int commit;
+	int lookahead;		/* Lazy update on recv, can become less than "read" */
 	int read;
 	int flags;
 	/* Data points here */
diff --git a/include/linux/tty_ldisc.h b/include/linux/tty_ldisc.h
index e85002b..ede6f215 100644
--- a/include/linux/tty_ldisc.h
+++ b/include/linux/tty_ldisc.h
@@ -186,6 +186,18 @@ int ldsem_down_write_nested(struct ld_semaphore *sem, int subclass,
  *	indicate all data received is %TTY_NORMAL. If assigned, prefer this
  *	function for automatic flow control.
  *
+ * @lookahead_buf: [DRV] ``void ()(struct tty_struct *tty,
+ *			const unsigned char *cp, const char *fp, int count)``
+ *
+ *	This function is called by the low-level tty driver for characters
+ *	not eaten by ->receive_buf() or ->receive_buf2(). It is useful for
+ *	processing high-priority characters such as software flow-control
+ *	characters that could otherwise get stuck into the intermediate
+ *	buffer until tty has room to receive them. Ldisc must be able to
+ *	handle later a ->receive_buf() or ->receive_buf2() call for the
+ *	same characters (e.g. by skipping the actions for high-priority
+ *	characters already handled by ->lookahead_buf()).
+ *
  * @owner: module containting this ldisc (for reference counting)
  *
  * This structure defines the interface between the tty line discipline
@@ -229,6 +241,8 @@ struct tty_ldisc_ops {
 	void	(*dcd_change)(struct tty_struct *tty, unsigned int status);
 	int	(*receive_buf2)(struct tty_struct *tty, const unsigned char *cp,
 				const char *fp, int count);
+	void	(*lookahead_buf)(struct tty_struct *tty, const unsigned char *cp,
+				 const unsigned char *fp, unsigned int count);
 
 	struct  module *owner;
 };
diff --git a/include/linux/tty_port.h b/include/linux/tty_port.h
index 58e9619..fa3c3bd 100644
--- a/include/linux/tty_port.h
+++ b/include/linux/tty_port.h
@@ -40,6 +40,8 @@ struct tty_port_operations {
 
 struct tty_port_client_operations {
 	int (*receive_buf)(struct tty_port *port, const unsigned char *, const unsigned char *, size_t);
+	void (*lookahead_buf)(struct tty_port *port, const unsigned char *cp,
+			      const unsigned char *fp, unsigned int count);
 	void (*write_wakeup)(struct tty_port *port);
 };
 
diff --git a/include/uapi/asm-generic/termbits-common.h b/include/uapi/asm-generic/termbits-common.h
index 4d084fe..4a6a79f 100644
--- a/include/uapi/asm-generic/termbits-common.h
+++ b/include/uapi/asm-generic/termbits-common.h
@@ -46,6 +46,7 @@ typedef unsigned int	speed_t;
 #define EXTA		B19200
 #define EXTB		B38400
 
+#define ADDRB		0x20000000	/* address bit */
 #define CMSPAR		0x40000000	/* mark or space (stick) parity */
 #define CRTSCTS		0x80000000	/* flow control */
 
diff --git a/include/uapi/linux/serial.h b/include/uapi/linux/serial.h
index fa6b16e..cea0692 100644
--- a/include/uapi/linux/serial.h
+++ b/include/uapi/linux/serial.h
@@ -126,10 +126,26 @@ struct serial_rs485 {
 #define SER_RS485_TERMINATE_BUS		(1 << 5)	/* Enable bus
 							   termination
 							   (if supported) */
+
+/* RS-485 addressing mode */
+#define SER_RS485_ADDRB			(1 << 6)	/* Enable addressing mode */
+#define SER_RS485_ADDR_RECV		(1 << 7)	/* Receive address filter */
+#define SER_RS485_ADDR_DEST		(1 << 8)	/* Destination address */
+
 	__u32	delay_rts_before_send;	/* Delay before send (milliseconds) */
 	__u32	delay_rts_after_send;	/* Delay after send (milliseconds) */
-	__u32	padding[5];		/* Memory is cheap, new structs
-					   are a royal PITA .. */
+
+	/* The fields below are defined by flags */
+	union {
+		__u32	padding[5];		/* Memory is cheap, new structs are a pain */
+
+		struct {
+			__u8	addr_recv;
+			__u8	addr_dest;
+			__u8	padding0[2];
+			__u32	padding1[4];
+		};
+	};
 };
 
 /*
diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h
index 6faf502..3ba34d8 100644
--- a/include/uapi/linux/serial_core.h
+++ b/include/uapi/linux/serial_core.h
@@ -124,10 +124,6 @@
 /* TXX9 type number */
 #define PORT_TXX9	64
 
-/* NEC VR4100 series SIU/DSIU */
-#define PORT_VR41XX_SIU		65
-#define PORT_VR41XX_DSIU	66
-
 /* Samsung S3C2400 SoC */
 #define PORT_S3C2400	67
 
diff --git a/include/uapi/linux/serial_reg.h b/include/uapi/linux/serial_reg.h
index f51bc8f..bab3b39 100644
--- a/include/uapi/linux/serial_reg.h
+++ b/include/uapi/linux/serial_reg.h
@@ -139,7 +139,7 @@
 #define UART_LSR_PE		0x04 /* Parity error indicator */
 #define UART_LSR_OE		0x02 /* Overrun error indicator */
 #define UART_LSR_DR		0x01 /* Receiver data ready */
-#define UART_LSR_BRK_ERROR_BITS	0x1E /* BI, FE, PE, OE bits */
+#define UART_LSR_BRK_ERROR_BITS	(UART_LSR_BI|UART_LSR_FE|UART_LSR_PE|UART_LSR_OE)
 
 #define UART_MSR	6	/* In:  Modem Status Register */
 #define UART_MSR_DCD		0x80 /* Data Carrier Detect */
@@ -150,7 +150,7 @@
 #define UART_MSR_TERI		0x04 /* Trailing edge ring indicator */
 #define UART_MSR_DDSR		0x02 /* Delta DSR */
 #define UART_MSR_DCTS		0x01 /* Delta CTS */
-#define UART_MSR_ANY_DELTA	0x0F /* Any of the delta bits! */
+#define UART_MSR_ANY_DELTA	(UART_MSR_DDCD|UART_MSR_TERI|UART_MSR_DDSR|UART_MSR_DCTS)
 
 #define UART_SCR	7	/* I/O: Scratch Register */