ASoC: tlv320aic32x4: Fix MICPGA input configuration
Currently the Negative Terminal Input Routing Configuration is only set
when there is a special routing configuration. If we don't use one of
the inputs IN1 or IN2 as negative terminal input, the PGA and recording
does not work.
This patch adds a route from CM1L/CM1R to the PGA as negative input by
default. With this configuration the PGA can amplify all input signals
and line-in/mic works again.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
diff --git a/sound/soc/codecs/tlv320aic32x4.c b/sound/soc/codecs/tlv320aic32x4.c
index ee9ad05..688151b 100644
--- a/sound/soc/codecs/tlv320aic32x4.c
+++ b/sound/soc/codecs/tlv320aic32x4.c
@@ -618,12 +618,14 @@
snd_soc_write(codec, AIC32X4_CMMODE, tmp_reg);
/* Mic PGA routing */
- if (aic32x4->micpga_routing & AIC32X4_MICPGA_ROUTE_LMIC_IN2R_10K) {
+ if (aic32x4->micpga_routing & AIC32X4_MICPGA_ROUTE_LMIC_IN2R_10K)
snd_soc_write(codec, AIC32X4_LMICPGANIN, AIC32X4_LMICPGANIN_IN2R_10K);
- }
- if (aic32x4->micpga_routing & AIC32X4_MICPGA_ROUTE_RMIC_IN1L_10K) {
+ else
+ snd_soc_write(codec, AIC32X4_LMICPGANIN, AIC32X4_LMICPGANIN_CM1L_10K);
+ if (aic32x4->micpga_routing & AIC32X4_MICPGA_ROUTE_RMIC_IN1L_10K)
snd_soc_write(codec, AIC32X4_RMICPGANIN, AIC32X4_RMICPGANIN_IN1L_10K);
- }
+ else
+ snd_soc_write(codec, AIC32X4_RMICPGANIN, AIC32X4_RMICPGANIN_CM1R_10K);
aic32x4_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
diff --git a/sound/soc/codecs/tlv320aic32x4.h b/sound/soc/codecs/tlv320aic32x4.h
index 83795af..995f033 100644
--- a/sound/soc/codecs/tlv320aic32x4.h
+++ b/sound/soc/codecs/tlv320aic32x4.h
@@ -120,7 +120,9 @@
#define AIC32X4_MICBIAS_2075V 0x60
#define AIC32X4_LMICPGANIN_IN2R_10K 0x10
+#define AIC32X4_LMICPGANIN_CM1L_10K 0x40
#define AIC32X4_RMICPGANIN_IN1L_10K 0x10
+#define AIC32X4_RMICPGANIN_CM1R_10K 0x40
#define AIC32X4_LMICPGAVOL_NOGAIN 0x80
#define AIC32X4_RMICPGAVOL_NOGAIN 0x80
