usbnet: Convert dev(dbg|err|warn|info) macros to netdev_<level>
These macros are too similar to the dev_<level> equivalents
but take a usbnet * argument. Convert them to the recently
introduced netdev_<level> macros and remove the old macros.
The old macros had "\n" appended to the format string.
Add the "\n" to the converted uses.
Some existing uses of the dev<foo> macros in cdc_eem.c
probably mistakenly had trailing "\n". No "\n" added there.
Fix net1080 this/other log message inversion.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/usb/asix.c b/drivers/net/usb/asix.c
index f025517..f605204 100644
--- a/drivers/net/usb/asix.c
+++ b/drivers/net/usb/asix.c
@@ -184,8 +184,8 @@
void *buf;
int err = -ENOMEM;
- devdbg(dev,"asix_read_cmd() cmd=0x%02x value=0x%04x index=0x%04x size=%d",
- cmd, value, index, size);
+ netdev_dbg(dev->net, "asix_read_cmd() cmd=0x%02x value=0x%04x index=0x%04x size=%d\n",
+ cmd, value, index, size);
buf = kmalloc(size, GFP_KERNEL);
if (!buf)
@@ -217,8 +217,8 @@
void *buf = NULL;
int err = -ENOMEM;
- devdbg(dev,"asix_write_cmd() cmd=0x%02x value=0x%04x index=0x%04x size=%d",
- cmd, value, index, size);
+ netdev_dbg(dev->net, "asix_write_cmd() cmd=0x%02x value=0x%04x index=0x%04x size=%d\n",
+ cmd, value, index, size);
if (data) {
buf = kmalloc(size, GFP_KERNEL);
@@ -264,15 +264,15 @@
int status;
struct urb *urb;
- devdbg(dev,"asix_write_cmd_async() cmd=0x%02x value=0x%04x index=0x%04x size=%d",
- cmd, value, index, size);
+ netdev_dbg(dev->net, "asix_write_cmd_async() cmd=0x%02x value=0x%04x index=0x%04x size=%d\n",
+ cmd, value, index, size);
if ((urb = usb_alloc_urb(0, GFP_ATOMIC)) == NULL) {
- deverr(dev, "Error allocating URB in write_cmd_async!");
+ netdev_err(dev->net, "Error allocating URB in write_cmd_async!\n");
return;
}
if ((req = kmalloc(sizeof(struct usb_ctrlrequest), GFP_ATOMIC)) == NULL) {
- deverr(dev, "Failed to allocate memory for control request");
+ netdev_err(dev->net, "Failed to allocate memory for control request\n");
usb_free_urb(urb);
return;
}
@@ -289,8 +289,8 @@
asix_async_cmd_callback, req);
if((status = usb_submit_urb(urb, GFP_ATOMIC)) < 0) {
- deverr(dev, "Error submitting the control message: status=%d",
- status);
+ netdev_err(dev->net, "Error submitting the control message: status=%d\n",
+ status);
kfree(req);
usb_free_urb(urb);
}
@@ -314,7 +314,7 @@
while (skb->len > 0) {
if ((short)(header & 0x0000ffff) !=
~((short)((header & 0xffff0000) >> 16))) {
- deverr(dev,"asix_rx_fixup() Bad Header Length");
+ netdev_err(dev->net, "asix_rx_fixup() Bad Header Length\n");
}
/* get the packet length */
size = (u16) (header & 0x0000ffff);
@@ -322,7 +322,8 @@
if ((skb->len) - ((size + 1) & 0xfffe) == 0)
return 2;
if (size > ETH_FRAME_LEN) {
- deverr(dev,"asix_rx_fixup() Bad RX Length %d", size);
+ netdev_err(dev->net, "asix_rx_fixup() Bad RX Length %d\n",
+ size);
return 0;
}
ax_skb = skb_clone(skb, GFP_ATOMIC);
@@ -348,7 +349,8 @@
}
if (skb->len < 0) {
- deverr(dev,"asix_rx_fixup() Bad SKB Length %d", skb->len);
+ netdev_err(dev->net, "asix_rx_fixup() Bad SKB Length %d\n",
+ skb->len);
return 0;
}
return 1;
@@ -409,7 +411,7 @@
usbnet_defer_kevent (dev, EVENT_LINK_RESET );
} else
netif_carrier_off(dev->net);
- devdbg(dev, "Link Status is: %d", link);
+ netdev_dbg(dev->net, "Link Status is: %d\n", link);
}
}
@@ -418,7 +420,7 @@
int ret;
ret = asix_write_cmd(dev, AX_CMD_SET_SW_MII, 0x0000, 0, 0, NULL);
if (ret < 0)
- deverr(dev, "Failed to enable software MII access");
+ netdev_err(dev->net, "Failed to enable software MII access\n");
return ret;
}
@@ -427,7 +429,7 @@
int ret;
ret = asix_write_cmd(dev, AX_CMD_SET_HW_MII, 0x0000, 0, 0, NULL);
if (ret < 0)
- deverr(dev, "Failed to enable hardware MII access");
+ netdev_err(dev->net, "Failed to enable hardware MII access\n");
return ret;
}
@@ -436,13 +438,14 @@
u8 buf[2];
int ret = asix_read_cmd(dev, AX_CMD_READ_PHY_ID, 0, 0, 2, buf);
- devdbg(dev, "asix_get_phy_addr()");
+ netdev_dbg(dev->net, "asix_get_phy_addr()\n");
if (ret < 0) {
- deverr(dev, "Error reading PHYID register: %02x", ret);
+ netdev_err(dev->net, "Error reading PHYID register: %02x\n", ret);
goto out;
}
- devdbg(dev, "asix_get_phy_addr() returning 0x%04x", *((__le16 *)buf));
+ netdev_dbg(dev->net, "asix_get_phy_addr() returning 0x%04x\n",
+ *((__le16 *)buf));
ret = buf[1];
out:
@@ -455,7 +458,7 @@
ret = asix_write_cmd(dev, AX_CMD_SW_RESET, flags, 0, 0, NULL);
if (ret < 0)
- deverr(dev,"Failed to send software reset: %02x", ret);
+ netdev_err(dev->net, "Failed to send software reset: %02x\n", ret);
return ret;
}
@@ -466,7 +469,7 @@
int ret = asix_read_cmd(dev, AX_CMD_READ_RX_CTL, 0, 0, 2, &v);
if (ret < 0) {
- deverr(dev, "Error reading RX_CTL register: %02x", ret);
+ netdev_err(dev->net, "Error reading RX_CTL register: %02x\n", ret);
goto out;
}
ret = le16_to_cpu(v);
@@ -478,11 +481,11 @@
{
int ret;
- devdbg(dev,"asix_write_rx_ctl() - mode = 0x%04x", mode);
+ netdev_dbg(dev->net, "asix_write_rx_ctl() - mode = 0x%04x\n", mode);
ret = asix_write_cmd(dev, AX_CMD_WRITE_RX_CTL, mode, 0, 0, NULL);
if (ret < 0)
- deverr(dev, "Failed to write RX_CTL mode to 0x%04x: %02x",
- mode, ret);
+ netdev_err(dev->net, "Failed to write RX_CTL mode to 0x%04x: %02x\n",
+ mode, ret);
return ret;
}
@@ -493,7 +496,8 @@
int ret = asix_read_cmd(dev, AX_CMD_READ_MEDIUM_STATUS, 0, 0, 2, &v);
if (ret < 0) {
- deverr(dev, "Error reading Medium Status register: %02x", ret);
+ netdev_err(dev->net, "Error reading Medium Status register: %02x\n",
+ ret);
goto out;
}
ret = le16_to_cpu(v);
@@ -505,11 +509,11 @@
{
int ret;
- devdbg(dev,"asix_write_medium_mode() - mode = 0x%04x", mode);
+ netdev_dbg(dev->net, "asix_write_medium_mode() - mode = 0x%04x\n", mode);
ret = asix_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE, mode, 0, 0, NULL);
if (ret < 0)
- deverr(dev, "Failed to write Medium Mode mode to 0x%04x: %02x",
- mode, ret);
+ netdev_err(dev->net, "Failed to write Medium Mode mode to 0x%04x: %02x\n",
+ mode, ret);
return ret;
}
@@ -518,11 +522,11 @@
{
int ret;
- devdbg(dev,"asix_write_gpio() - value = 0x%04x", value);
+ netdev_dbg(dev->net, "asix_write_gpio() - value = 0x%04x\n", value);
ret = asix_write_cmd(dev, AX_CMD_WRITE_GPIOS, value, 0, 0, NULL);
if (ret < 0)
- deverr(dev, "Failed to write GPIO value 0x%04x: %02x",
- value, ret);
+ netdev_err(dev->net, "Failed to write GPIO value 0x%04x: %02x\n",
+ value, ret);
if (sleep)
msleep(sleep);
@@ -588,7 +592,8 @@
asix_set_hw_mii(dev);
mutex_unlock(&dev->phy_mutex);
- devdbg(dev, "asix_mdio_read() phy_id=0x%02x, loc=0x%02x, returns=0x%04x", phy_id, loc, le16_to_cpu(res));
+ netdev_dbg(dev->net, "asix_mdio_read() phy_id=0x%02x, loc=0x%02x, returns=0x%04x\n",
+ phy_id, loc, le16_to_cpu(res));
return le16_to_cpu(res);
}
@@ -599,7 +604,8 @@
struct usbnet *dev = netdev_priv(netdev);
__le16 res = cpu_to_le16(val);
- devdbg(dev, "asix_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x", phy_id, loc, val);
+ netdev_dbg(dev->net, "asix_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x\n",
+ phy_id, loc, val);
mutex_lock(&dev->phy_mutex);
asix_set_sw_mii(dev);
asix_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id, (__u16)loc, 2, &res);
@@ -800,7 +806,8 @@
if (ecmd.duplex != DUPLEX_FULL)
mode |= ~AX88172_MEDIUM_FD;
- devdbg(dev, "ax88172_link_reset() speed: %d duplex: %d setting mode to 0x%04x", ecmd.speed, ecmd.duplex, mode);
+ netdev_dbg(dev->net, "ax88172_link_reset() speed: %d duplex: %d setting mode to 0x%04x\n",
+ ecmd.speed, ecmd.duplex, mode);
asix_write_medium_mode(dev, mode);
@@ -902,7 +909,8 @@
if (ecmd.duplex != DUPLEX_FULL)
mode &= ~AX_MEDIUM_FD;
- devdbg(dev, "ax88772_link_reset() speed: %d duplex: %d setting mode to 0x%04x", ecmd.speed, ecmd.duplex, mode);
+ netdev_dbg(dev->net, "ax88772_link_reset() speed: %d duplex: %d setting mode to 0x%04x\n",
+ ecmd.speed, ecmd.duplex, mode);
asix_write_medium_mode(dev, mode);
@@ -1059,10 +1067,10 @@
struct asix_data *data = (struct asix_data *)&dev->data;
u16 reg;
- devdbg(dev,"marvell_phy_init()");
+ netdev_dbg(dev->net, "marvell_phy_init()\n");
reg = asix_mdio_read(dev->net, dev->mii.phy_id, MII_MARVELL_STATUS);
- devdbg(dev,"MII_MARVELL_STATUS = 0x%04x", reg);
+ netdev_dbg(dev->net, "MII_MARVELL_STATUS = 0x%04x\n", reg);
asix_mdio_write(dev->net, dev->mii.phy_id, MII_MARVELL_CTRL,
MARVELL_CTRL_RXDELAY | MARVELL_CTRL_TXDELAY);
@@ -1070,7 +1078,7 @@
if (data->ledmode) {
reg = asix_mdio_read(dev->net, dev->mii.phy_id,
MII_MARVELL_LED_CTRL);
- devdbg(dev,"MII_MARVELL_LED_CTRL (1) = 0x%04x", reg);
+ netdev_dbg(dev->net, "MII_MARVELL_LED_CTRL (1) = 0x%04x\n", reg);
reg &= 0xf8ff;
reg |= (1 + 0x0100);
@@ -1079,7 +1087,7 @@
reg = asix_mdio_read(dev->net, dev->mii.phy_id,
MII_MARVELL_LED_CTRL);
- devdbg(dev,"MII_MARVELL_LED_CTRL (2) = 0x%04x", reg);
+ netdev_dbg(dev->net, "MII_MARVELL_LED_CTRL (2) = 0x%04x\n", reg);
reg &= 0xfc0f;
}
@@ -1090,7 +1098,7 @@
{
u16 reg = asix_mdio_read(dev->net, dev->mii.phy_id, MARVELL_LED_MANUAL);
- devdbg(dev, "marvell_led_status() read 0x%04x", reg);
+ netdev_dbg(dev->net, "marvell_led_status() read 0x%04x\n", reg);
/* Clear out the center LED bits - 0x03F0 */
reg &= 0xfc0f;
@@ -1106,7 +1114,7 @@
reg |= 0x02f0;
}
- devdbg(dev, "marvell_led_status() writing 0x%04x", reg);
+ netdev_dbg(dev->net, "marvell_led_status() writing 0x%04x\n", reg);
asix_mdio_write(dev->net, dev->mii.phy_id, MARVELL_LED_MANUAL, reg);
return 0;
@@ -1118,7 +1126,7 @@
struct ethtool_cmd ecmd;
struct asix_data *data = (struct asix_data *)&dev->data;
- devdbg(dev,"ax88178_link_reset()");
+ netdev_dbg(dev->net, "ax88178_link_reset()\n");
mii_check_media(&dev->mii, 1, 1);
mii_ethtool_gset(&dev->mii, &ecmd);
@@ -1138,7 +1146,8 @@
else
mode &= ~AX_MEDIUM_FD;
- devdbg(dev, "ax88178_link_reset() speed: %d duplex: %d setting mode to 0x%04x", ecmd.speed, ecmd.duplex, mode);
+ netdev_dbg(dev->net, "ax88178_link_reset() speed: %d duplex: %d setting mode to 0x%04x\n",
+ ecmd.speed, ecmd.duplex, mode);
asix_write_medium_mode(dev, mode);
@@ -1188,7 +1197,7 @@
struct usbnet *dev = netdev_priv(net);
int ll_mtu = new_mtu + net->hard_header_len + 4;
- devdbg(dev, "ax88178_change_mtu() new_mtu=%d", new_mtu);
+ netdev_dbg(dev->net, "ax88178_change_mtu() new_mtu=%d\n", new_mtu);
if (new_mtu <= 0 || ll_mtu > 16384)
return -EINVAL;
