Bluetooth: Use new hci_skb_pkt_* wrappers for drivers
The new hci_skb_pkt_* wrappers are mainly intented for drivers to
require less knowledge about bt_cb(sbk) handling. So after converting
the core packet handling, convert all drivers.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
diff --git a/drivers/bluetooth/bluecard_cs.c b/drivers/bluetooth/bluecard_cs.c
index 36fa1c9..c0b3b55 100644
--- a/drivers/bluetooth/bluecard_cs.c
+++ b/drivers/bluetooth/bluecard_cs.c
@@ -261,7 +261,7 @@
if (!skb)
break;
- if (bt_cb(skb)->pkt_type & 0x80) {
+ if (hci_skb_pkt_type(skb) & 0x80) {
/* Disable RTS */
info->ctrl_reg |= REG_CONTROL_RTS;
outb(info->ctrl_reg, iobase + REG_CONTROL);
@@ -279,13 +279,13 @@
/* Mark the buffer as dirty */
clear_bit(ready_bit, &(info->tx_state));
- if (bt_cb(skb)->pkt_type & 0x80) {
+ if (hci_skb_pkt_type(skb) & 0x80) {
DECLARE_WAIT_QUEUE_HEAD_ONSTACK(wq);
DEFINE_WAIT(wait);
unsigned char baud_reg;
- switch (bt_cb(skb)->pkt_type) {
+ switch (hci_skb_pkt_type(skb)) {
case PKT_BAUD_RATE_460800:
baud_reg = REG_CONTROL_BAUD_RATE_460800;
break;
@@ -402,9 +402,9 @@
if (info->rx_state == RECV_WAIT_PACKET_TYPE) {
- bt_cb(info->rx_skb)->pkt_type = buf[i];
+ hci_skb_pkt_type(info->rx_skb) = buf[i];
- switch (bt_cb(info->rx_skb)->pkt_type) {
+ switch (hci_skb_pkt_type(info->rx_skb)) {
case 0x00:
/* init packet */
@@ -436,7 +436,8 @@
default:
/* unknown packet */
- BT_ERR("Unknown HCI packet with type 0x%02x received", bt_cb(info->rx_skb)->pkt_type);
+ BT_ERR("Unknown HCI packet with type 0x%02x received",
+ hci_skb_pkt_type(info->rx_skb));
info->hdev->stat.err_rx++;
kfree_skb(info->rx_skb);
@@ -578,21 +579,21 @@
switch (baud) {
case 460800:
cmd[4] = 0x00;
- bt_cb(skb)->pkt_type = PKT_BAUD_RATE_460800;
+ hci_skb_pkt_type(skb) = PKT_BAUD_RATE_460800;
break;
case 230400:
cmd[4] = 0x01;
- bt_cb(skb)->pkt_type = PKT_BAUD_RATE_230400;
+ hci_skb_pkt_type(skb) = PKT_BAUD_RATE_230400;
break;
case 115200:
cmd[4] = 0x02;
- bt_cb(skb)->pkt_type = PKT_BAUD_RATE_115200;
+ hci_skb_pkt_type(skb) = PKT_BAUD_RATE_115200;
break;
case 57600:
/* Fall through... */
default:
cmd[4] = 0x03;
- bt_cb(skb)->pkt_type = PKT_BAUD_RATE_57600;
+ hci_skb_pkt_type(skb) = PKT_BAUD_RATE_57600;
break;
}
@@ -660,7 +661,7 @@
{
struct bluecard_info *info = hci_get_drvdata(hdev);
- switch (bt_cb(skb)->pkt_type) {
+ switch (hci_skb_pkt_type(skb)) {
case HCI_COMMAND_PKT:
hdev->stat.cmd_tx++;
break;
@@ -673,7 +674,7 @@
}
/* Prepend skb with frame type */
- memcpy(skb_push(skb, 1), &bt_cb(skb)->pkt_type, 1);
+ memcpy(skb_push(skb, 1), &hci_skb_pkt_type(skb), 1);
skb_queue_tail(&(info->txq), skb);
bluecard_write_wakeup(info);
