Merge branch 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds
* 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds:
leds: Futher document blink_set
leds: Add options to have GPIO LEDs start on or keep their state
leds: LED driver for National Semiconductor LP3944 Funlight Chip
leds: pca9532 - Indent using tabs, not spaces.
leds: Remove an orphan Kconfig entry
leds: Further document parameters for blink_set()
leds: alix-leds2 fixed for Award BIOS
leds: leds-gpio - fix a section mismatch
leds: add the sysfs interface into the leds-bd2802 driver for changing wave pattern and led current.
leds: change the license information
leds: fix led-bd2802 errors while resuming
diff --git a/Documentation/device-mapper/dm-log.txt b/Documentation/device-mapper/dm-log.txt
new file mode 100644
index 0000000..994dd75
--- /dev/null
+++ b/Documentation/device-mapper/dm-log.txt
@@ -0,0 +1,54 @@
+Device-Mapper Logging
+=====================
+The device-mapper logging code is used by some of the device-mapper
+RAID targets to track regions of the disk that are not consistent.
+A region (or portion of the address space) of the disk may be
+inconsistent because a RAID stripe is currently being operated on or
+a machine died while the region was being altered. In the case of
+mirrors, a region would be considered dirty/inconsistent while you
+are writing to it because the writes need to be replicated for all
+the legs of the mirror and may not reach the legs at the same time.
+Once all writes are complete, the region is considered clean again.
+
+There is a generic logging interface that the device-mapper RAID
+implementations use to perform logging operations (see
+dm_dirty_log_type in include/linux/dm-dirty-log.h). Various different
+logging implementations are available and provide different
+capabilities. The list includes:
+
+Type Files
+==== =====
+disk drivers/md/dm-log.c
+core drivers/md/dm-log.c
+userspace drivers/md/dm-log-userspace* include/linux/dm-log-userspace.h
+
+The "disk" log type
+-------------------
+This log implementation commits the log state to disk. This way, the
+logging state survives reboots/crashes.
+
+The "core" log type
+-------------------
+This log implementation keeps the log state in memory. The log state
+will not survive a reboot or crash, but there may be a small boost in
+performance. This method can also be used if no storage device is
+available for storing log state.
+
+The "userspace" log type
+------------------------
+This log type simply provides a way to export the log API to userspace,
+so log implementations can be done there. This is done by forwarding most
+logging requests to userspace, where a daemon receives and processes the
+request.
+
+The structure used for communication between kernel and userspace are
+located in include/linux/dm-log-userspace.h. Due to the frequency,
+diversity, and 2-way communication nature of the exchanges between
+kernel and userspace, 'connector' is used as the interface for
+communication.
+
+There are currently two userspace log implementations that leverage this
+framework - "clustered_disk" and "clustered_core". These implementations
+provide a cluster-coherent log for shared-storage. Device-mapper mirroring
+can be used in a shared-storage environment when the cluster log implementations
+are employed.
diff --git a/Documentation/device-mapper/dm-queue-length.txt b/Documentation/device-mapper/dm-queue-length.txt
new file mode 100644
index 0000000..f4db256
--- /dev/null
+++ b/Documentation/device-mapper/dm-queue-length.txt
@@ -0,0 +1,39 @@
+dm-queue-length
+===============
+
+dm-queue-length is a path selector module for device-mapper targets,
+which selects a path with the least number of in-flight I/Os.
+The path selector name is 'queue-length'.
+
+Table parameters for each path: [<repeat_count>]
+ <repeat_count>: The number of I/Os to dispatch using the selected
+ path before switching to the next path.
+ If not given, internal default is used. To check
+ the default value, see the activated table.
+
+Status for each path: <status> <fail-count> <in-flight>
+ <status>: 'A' if the path is active, 'F' if the path is failed.
+ <fail-count>: The number of path failures.
+ <in-flight>: The number of in-flight I/Os on the path.
+
+
+Algorithm
+=========
+
+dm-queue-length increments/decrements 'in-flight' when an I/O is
+dispatched/completed respectively.
+dm-queue-length selects a path with the minimum 'in-flight'.
+
+
+Examples
+========
+In case that 2 paths (sda and sdb) are used with repeat_count == 128.
+
+# echo "0 10 multipath 0 0 1 1 queue-length 0 2 1 8:0 128 8:16 128" \
+ dmsetup create test
+#
+# dmsetup table
+test: 0 10 multipath 0 0 1 1 queue-length 0 2 1 8:0 128 8:16 128
+#
+# dmsetup status
+test: 0 10 multipath 2 0 0 0 1 1 E 0 2 1 8:0 A 0 0 8:16 A 0 0
diff --git a/Documentation/device-mapper/dm-service-time.txt b/Documentation/device-mapper/dm-service-time.txt
new file mode 100644
index 0000000..7d00668
--- /dev/null
+++ b/Documentation/device-mapper/dm-service-time.txt
@@ -0,0 +1,91 @@
+dm-service-time
+===============
+
+dm-service-time is a path selector module for device-mapper targets,
+which selects a path with the shortest estimated service time for
+the incoming I/O.
+
+The service time for each path is estimated by dividing the total size
+of in-flight I/Os on a path with the performance value of the path.
+The performance value is a relative throughput value among all paths
+in a path-group, and it can be specified as a table argument.
+
+The path selector name is 'service-time'.
+
+Table parameters for each path: [<repeat_count> [<relative_throughput>]]
+ <repeat_count>: The number of I/Os to dispatch using the selected
+ path before switching to the next path.
+ If not given, internal default is used. To check
+ the default value, see the activated table.
+ <relative_throughput>: The relative throughput value of the path
+ among all paths in the path-group.
+ The valid range is 0-100.
+ If not given, minimum value '1' is used.
+ If '0' is given, the path isn't selected while
+ other paths having a positive value are available.
+
+Status for each path: <status> <fail-count> <in-flight-size> \
+ <relative_throughput>
+ <status>: 'A' if the path is active, 'F' if the path is failed.
+ <fail-count>: The number of path failures.
+ <in-flight-size>: The size of in-flight I/Os on the path.
+ <relative_throughput>: The relative throughput value of the path
+ among all paths in the path-group.
+
+
+Algorithm
+=========
+
+dm-service-time adds the I/O size to 'in-flight-size' when the I/O is
+dispatched and substracts when completed.
+Basically, dm-service-time selects a path having minimum service time
+which is calculated by:
+
+ ('in-flight-size' + 'size-of-incoming-io') / 'relative_throughput'
+
+However, some optimizations below are used to reduce the calculation
+as much as possible.
+
+ 1. If the paths have the same 'relative_throughput', skip
+ the division and just compare the 'in-flight-size'.
+
+ 2. If the paths have the same 'in-flight-size', skip the division
+ and just compare the 'relative_throughput'.
+
+ 3. If some paths have non-zero 'relative_throughput' and others
+ have zero 'relative_throughput', ignore those paths with zero
+ 'relative_throughput'.
+
+If such optimizations can't be applied, calculate service time, and
+compare service time.
+If calculated service time is equal, the path having maximum
+'relative_throughput' may be better. So compare 'relative_throughput'
+then.
+
+
+Examples
+========
+In case that 2 paths (sda and sdb) are used with repeat_count == 128
+and sda has an average throughput 1GB/s and sdb has 4GB/s,
+'relative_throughput' value may be '1' for sda and '4' for sdb.
+
+# echo "0 10 multipath 0 0 1 1 service-time 0 2 2 8:0 128 1 8:16 128 4" \
+ dmsetup create test
+#
+# dmsetup table
+test: 0 10 multipath 0 0 1 1 service-time 0 2 2 8:0 128 1 8:16 128 4
+#
+# dmsetup status
+test: 0 10 multipath 2 0 0 0 1 1 E 0 2 2 8:0 A 0 0 1 8:16 A 0 0 4
+
+
+Or '2' for sda and '8' for sdb would be also true.
+
+# echo "0 10 multipath 0 0 1 1 service-time 0 2 2 8:0 128 2 8:16 128 8" \
+ dmsetup create test
+#
+# dmsetup table
+test: 0 10 multipath 0 0 1 1 service-time 0 2 2 8:0 128 2 8:16 128 8
+#
+# dmsetup status
+test: 0 10 multipath 2 0 0 0 1 1 E 0 2 2 8:0 A 0 0 2 8:16 A 0 0 8
diff --git a/Documentation/filesystems/Locking b/Documentation/filesystems/Locking
index 229d7b7..18b9d0c 100644
--- a/Documentation/filesystems/Locking
+++ b/Documentation/filesystems/Locking
@@ -109,27 +109,28 @@
locking rules:
All may block.
- BKL s_lock s_umount
-alloc_inode: no no no
-destroy_inode: no
-dirty_inode: no (must not sleep)
-write_inode: no
-drop_inode: no !!!inode_lock!!!
-delete_inode: no
-put_super: yes yes no
-write_super: no yes read
-sync_fs: no no read
-freeze_fs: ?
-unfreeze_fs: ?
-statfs: no no no
-remount_fs: yes yes maybe (see below)
-clear_inode: no
-umount_begin: yes no no
-show_options: no (vfsmount->sem)
-quota_read: no no no (see below)
-quota_write: no no no (see below)
+ None have BKL
+ s_umount
+alloc_inode:
+destroy_inode:
+dirty_inode: (must not sleep)
+write_inode:
+drop_inode: !!!inode_lock!!!
+delete_inode:
+put_super: write
+write_super: read
+sync_fs: read
+freeze_fs: read
+unfreeze_fs: read
+statfs: no
+remount_fs: maybe (see below)
+clear_inode:
+umount_begin: no
+show_options: no (namespace_sem)
+quota_read: no (see below)
+quota_write: no (see below)
-->remount_fs() will have the s_umount lock if it's already mounted.
+->remount_fs() will have the s_umount exclusive lock if it's already mounted.
When called from get_sb_single, it does NOT have the s_umount lock.
->quota_read() and ->quota_write() functions are both guaranteed to
be the only ones operating on the quota file by the quota code (via
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 92e1ab8..d08759a 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -229,14 +229,6 @@
to assume that this machine's pmtimer latches its value
and always returns good values.
- acpi.power_nocheck= [HW,ACPI]
- Format: 1/0 enable/disable the check of power state.
- On some bogus BIOS the _PSC object/_STA object of
- power resource can't return the correct device power
- state. In such case it is unneccessary to check its
- power state again in power transition.
- 1 : disable the power state check
-
acpi_sci= [HW,ACPI] ACPI System Control Interrupt trigger mode
Format: { level | edge | high | low }
@@ -1863,7 +1855,7 @@
IRQ routing is enabled.
noacpi [X86] Do not use ACPI for IRQ routing
or for PCI scanning.
- nocrs [X86] Don't use _CRS for PCI resource
+ use_crs [X86] Use _CRS for PCI resource
allocation.
routeirq Do IRQ routing for all PCI devices.
This is normally done in pci_enable_device(),
diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt
index 78e354b..f2296ec 100644
--- a/Documentation/laptops/thinkpad-acpi.txt
+++ b/Documentation/laptops/thinkpad-acpi.txt
@@ -920,7 +920,7 @@
echo '<LED number> off' >/proc/acpi/ibm/led
echo '<LED number> blink' >/proc/acpi/ibm/led
-The <LED number> range is 0 to 7. The set of LEDs that can be
+The <LED number> range is 0 to 15. The set of LEDs that can be
controlled varies from model to model. Here is the common ThinkPad
mapping:
@@ -932,6 +932,11 @@
5 - UltraBase battery slot
6 - (unknown)
7 - standby
+ 8 - dock status 1
+ 9 - dock status 2
+ 10, 11 - (unknown)
+ 12 - thinkvantage
+ 13, 14, 15 - (unknown)
All of the above can be turned on and off and can be made to blink.
@@ -940,10 +945,12 @@
The ThinkPad LED sysfs interface is described in detail by the LED class
documentation, in Documentation/leds-class.txt.
-The leds are named (in LED ID order, from 0 to 7):
+The LEDs are named (in LED ID order, from 0 to 12):
"tpacpi::power", "tpacpi:orange:batt", "tpacpi:green:batt",
"tpacpi::dock_active", "tpacpi::bay_active", "tpacpi::dock_batt",
-"tpacpi::unknown_led", "tpacpi::standby".
+"tpacpi::unknown_led", "tpacpi::standby", "tpacpi::dock_status1",
+"tpacpi::dock_status2", "tpacpi::unknown_led2", "tpacpi::unknown_led3",
+"tpacpi::thinkvantage".
Due to limitations in the sysfs LED class, if the status of the LED
indicators cannot be read due to an error, thinkpad-acpi will report it as
@@ -958,6 +965,12 @@
"timer" trigger, and leave the delay_on and delay_off parameters set to
zero (to request hardware acceleration autodetection).
+LEDs that are known not to exist in a given ThinkPad model are not
+made available through the sysfs interface. If you have a dock and you
+notice there are LEDs listed for your ThinkPad that do not exist (and
+are not in the dock), or if you notice that there are missing LEDs,
+a report to ibm-acpi-devel@lists.sourceforge.net is appreciated.
+
ACPI sounds -- /proc/acpi/ibm/beep
----------------------------------
@@ -1156,17 +1169,19 @@
display backlight brightness control methods have 16 levels, ranging
from 0 to 15.
-There are two interfaces to the firmware for direct brightness control,
-EC and UCMS (or CMOS). To select which one should be used, use the
-brightness_mode module parameter: brightness_mode=1 selects EC mode,
-brightness_mode=2 selects UCMS mode, brightness_mode=3 selects EC
-mode with NVRAM backing (so that brightness changes are remembered
-across shutdown/reboot).
+For IBM ThinkPads, there are two interfaces to the firmware for direct
+brightness control, EC and UCMS (or CMOS). To select which one should be
+used, use the brightness_mode module parameter: brightness_mode=1 selects
+EC mode, brightness_mode=2 selects UCMS mode, brightness_mode=3 selects EC
+mode with NVRAM backing (so that brightness changes are remembered across
+shutdown/reboot).
The driver tries to select which interface to use from a table of
defaults for each ThinkPad model. If it makes a wrong choice, please
report this as a bug, so that we can fix it.
+Lenovo ThinkPads only support brightness_mode=2 (UCMS).
+
When display backlight brightness controls are available through the
standard ACPI interface, it is best to use it instead of this direct
ThinkPad-specific interface. The driver will disable its native
@@ -1254,7 +1269,7 @@
procfs: /proc/acpi/ibm/fan
sysfs device attributes: (hwmon "thinkpad") fan1_input, pwm1,
- pwm1_enable
+ pwm1_enable, fan2_input
sysfs hwmon driver attributes: fan_watchdog
NOTE NOTE NOTE: fan control operations are disabled by default for
@@ -1267,6 +1282,9 @@
to work on later R, T, X and Z series ThinkPads but may show a bogus
value on other models.
+Some Lenovo ThinkPads support a secondary fan. This fan cannot be
+controlled separately, it shares the main fan control.
+
Fan levels:
Most ThinkPad fans work in "levels" at the firmware interface. Level 0
@@ -1397,6 +1415,11 @@
which can take up to two minutes. May return rubbish on older
ThinkPads.
+hwmon device attribute fan2_input:
+ Fan tachometer reading, in RPM, for the secondary fan.
+ Available only on some ThinkPads. If the secondary fan is
+ not installed, will always read 0.
+
hwmon driver attribute fan_watchdog:
Fan safety watchdog timer interval, in seconds. Minimum is
1 second, maximum is 120 seconds. 0 disables the watchdog.
@@ -1555,3 +1578,7 @@
0x020300: hotkey enable/disable support removed, attributes
hotkey_bios_enabled and hotkey_enable deprecated and
marked for removal.
+
+0x020400: Marker for 16 LEDs support. Also, LEDs that are known
+ to not exist in a given model are not registered with
+ the LED sysfs class anymore.
diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index 8d999d8..79f533f 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -1238,1122 +1238,7 @@
defined; this list will expand as more and more SOC-containing
platforms are moved over to use the flattened-device-tree model.
- a) PHY nodes
-
- Required properties:
-
- - device_type : Should be "ethernet-phy"
- - interrupts : <a b> where a is the interrupt number and b is a
- field that represents an encoding of the sense and level
- information for the interrupt. This should be encoded based on
- the information in section 2) depending on the type of interrupt
- controller you have.
- - interrupt-parent : the phandle for the interrupt controller that
- services interrupts for this device.
- - reg : The ID number for the phy, usually a small integer
- - linux,phandle : phandle for this node; likely referenced by an
- ethernet controller node.
-
-
- Example:
-
- ethernet-phy@0 {
- linux,phandle = <2452000>
- interrupt-parent = <40000>;
- interrupts = <35 1>;
- reg = <0>;
- device_type = "ethernet-phy";
- };
-
-
- b) Interrupt controllers
-
- Some SOC devices contain interrupt controllers that are different
- from the standard Open PIC specification. The SOC device nodes for
- these types of controllers should be specified just like a standard
- OpenPIC controller. Sense and level information should be encoded
- as specified in section 2) of this chapter for each device that
- specifies an interrupt.
-
- Example :
-
- pic@40000 {
- linux,phandle = <40000>;
- interrupt-controller;
- #address-cells = <0>;
- reg = <40000 40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- };
-
- c) 4xx/Axon EMAC ethernet nodes
-
- The EMAC ethernet controller in IBM and AMCC 4xx chips, and also
- the Axon bridge. To operate this needs to interact with a ths
- special McMAL DMA controller, and sometimes an RGMII or ZMII
- interface. In addition to the nodes and properties described
- below, the node for the OPB bus on which the EMAC sits must have a
- correct clock-frequency property.
-
- i) The EMAC node itself
-
- Required properties:
- - device_type : "network"
-
- - compatible : compatible list, contains 2 entries, first is
- "ibm,emac-CHIP" where CHIP is the host ASIC (440gx,
- 405gp, Axon) and second is either "ibm,emac" or
- "ibm,emac4". For Axon, thus, we have: "ibm,emac-axon",
- "ibm,emac4"
- - interrupts : <interrupt mapping for EMAC IRQ and WOL IRQ>
- - interrupt-parent : optional, if needed for interrupt mapping
- - reg : <registers mapping>
- - local-mac-address : 6 bytes, MAC address
- - mal-device : phandle of the associated McMAL node
- - mal-tx-channel : 1 cell, index of the tx channel on McMAL associated
- with this EMAC
- - mal-rx-channel : 1 cell, index of the rx channel on McMAL associated
- with this EMAC
- - cell-index : 1 cell, hardware index of the EMAC cell on a given
- ASIC (typically 0x0 and 0x1 for EMAC0 and EMAC1 on
- each Axon chip)
- - max-frame-size : 1 cell, maximum frame size supported in bytes
- - rx-fifo-size : 1 cell, Rx fifo size in bytes for 10 and 100 Mb/sec
- operations.
- For Axon, 2048
- - tx-fifo-size : 1 cell, Tx fifo size in bytes for 10 and 100 Mb/sec
- operations.
- For Axon, 2048.
- - fifo-entry-size : 1 cell, size of a fifo entry (used to calculate
- thresholds).
- For Axon, 0x00000010
- - mal-burst-size : 1 cell, MAL burst size (used to calculate thresholds)
- in bytes.
- For Axon, 0x00000100 (I think ...)
- - phy-mode : string, mode of operations of the PHY interface.
- Supported values are: "mii", "rmii", "smii", "rgmii",
- "tbi", "gmii", rtbi", "sgmii".
- For Axon on CAB, it is "rgmii"
- - mdio-device : 1 cell, required iff using shared MDIO registers
- (440EP). phandle of the EMAC to use to drive the
- MDIO lines for the PHY used by this EMAC.
- - zmii-device : 1 cell, required iff connected to a ZMII. phandle of
- the ZMII device node
- - zmii-channel : 1 cell, required iff connected to a ZMII. Which ZMII
- channel or 0xffffffff if ZMII is only used for MDIO.
- - rgmii-device : 1 cell, required iff connected to an RGMII. phandle
- of the RGMII device node.
- For Axon: phandle of plb5/plb4/opb/rgmii
- - rgmii-channel : 1 cell, required iff connected to an RGMII. Which
- RGMII channel is used by this EMAC.
- Fox Axon: present, whatever value is appropriate for each
- EMAC, that is the content of the current (bogus) "phy-port"
- property.
-
- Optional properties:
- - phy-address : 1 cell, optional, MDIO address of the PHY. If absent,
- a search is performed.
- - phy-map : 1 cell, optional, bitmap of addresses to probe the PHY
- for, used if phy-address is absent. bit 0x00000001 is
- MDIO address 0.
- For Axon it can be absent, though my current driver
- doesn't handle phy-address yet so for now, keep
- 0x00ffffff in it.
- - rx-fifo-size-gige : 1 cell, Rx fifo size in bytes for 1000 Mb/sec
- operations (if absent the value is the same as
- rx-fifo-size). For Axon, either absent or 2048.
- - tx-fifo-size-gige : 1 cell, Tx fifo size in bytes for 1000 Mb/sec
- operations (if absent the value is the same as
- tx-fifo-size). For Axon, either absent or 2048.
- - tah-device : 1 cell, optional. If connected to a TAH engine for
- offload, phandle of the TAH device node.
- - tah-channel : 1 cell, optional. If appropriate, channel used on the
- TAH engine.
-
- Example:
-
- EMAC0: ethernet@40000800 {
- device_type = "network";
- compatible = "ibm,emac-440gp", "ibm,emac";
- interrupt-parent = <&UIC1>;
- interrupts = <1c 4 1d 4>;
- reg = <40000800 70>;
- local-mac-address = [00 04 AC E3 1B 1E];
- mal-device = <&MAL0>;
- mal-tx-channel = <0 1>;
- mal-rx-channel = <0>;
- cell-index = <0>;
- max-frame-size = <5dc>;
- rx-fifo-size = <1000>;
- tx-fifo-size = <800>;
- phy-mode = "rmii";
- phy-map = <00000001>;
- zmii-device = <&ZMII0>;
- zmii-channel = <0>;
- };
-
- ii) McMAL node
-
- Required properties:
- - device_type : "dma-controller"
- - compatible : compatible list, containing 2 entries, first is
- "ibm,mcmal-CHIP" where CHIP is the host ASIC (like
- emac) and the second is either "ibm,mcmal" or
- "ibm,mcmal2".
- For Axon, "ibm,mcmal-axon","ibm,mcmal2"
- - interrupts : <interrupt mapping for the MAL interrupts sources:
- 5 sources: tx_eob, rx_eob, serr, txde, rxde>.
- For Axon: This is _different_ from the current
- firmware. We use the "delayed" interrupts for txeob
- and rxeob. Thus we end up with mapping those 5 MPIC
- interrupts, all level positive sensitive: 10, 11, 32,
- 33, 34 (in decimal)
- - dcr-reg : < DCR registers range >
- - dcr-parent : if needed for dcr-reg
- - num-tx-chans : 1 cell, number of Tx channels
- - num-rx-chans : 1 cell, number of Rx channels
-
- iii) ZMII node
-
- Required properties:
- - compatible : compatible list, containing 2 entries, first is
- "ibm,zmii-CHIP" where CHIP is the host ASIC (like
- EMAC) and the second is "ibm,zmii".
- For Axon, there is no ZMII node.
- - reg : <registers mapping>
-
- iv) RGMII node
-
- Required properties:
- - compatible : compatible list, containing 2 entries, first is
- "ibm,rgmii-CHIP" where CHIP is the host ASIC (like
- EMAC) and the second is "ibm,rgmii".
- For Axon, "ibm,rgmii-axon","ibm,rgmii"
- - reg : <registers mapping>
- - revision : as provided by the RGMII new version register if
- available.
- For Axon: 0x0000012a
-
- d) Xilinx IP cores
-
- The Xilinx EDK toolchain ships with a set of IP cores (devices) for use
- in Xilinx Spartan and Virtex FPGAs. The devices cover the whole range
- of standard device types (network, serial, etc.) and miscellaneous
- devices (gpio, LCD, spi, etc). Also, since these devices are
- implemented within the fpga fabric every instance of the device can be
- synthesised with different options that change the behaviour.
-
- Each IP-core has a set of parameters which the FPGA designer can use to
- control how the core is synthesized. Historically, the EDK tool would
- extract the device parameters relevant to device drivers and copy them
- into an 'xparameters.h' in the form of #define symbols. This tells the
- device drivers how the IP cores are configured, but it requres the kernel
- to be recompiled every time the FPGA bitstream is resynthesized.
-
- The new approach is to export the parameters into the device tree and
- generate a new device tree each time the FPGA bitstream changes. The
- parameters which used to be exported as #defines will now become
- properties of the device node. In general, device nodes for IP-cores
- will take the following form:
-
- (name): (generic-name)@(base-address) {
- compatible = "xlnx,(ip-core-name)-(HW_VER)"
- [, (list of compatible devices), ...];
- reg = <(baseaddr) (size)>;
- interrupt-parent = <&interrupt-controller-phandle>;
- interrupts = < ... >;
- xlnx,(parameter1) = "(string-value)";
- xlnx,(parameter2) = <(int-value)>;
- };
-
- (generic-name): an open firmware-style name that describes the
- generic class of device. Preferably, this is one word, such
- as 'serial' or 'ethernet'.
- (ip-core-name): the name of the ip block (given after the BEGIN
- directive in system.mhs). Should be in lowercase
- and all underscores '_' converted to dashes '-'.
- (name): is derived from the "PARAMETER INSTANCE" value.
- (parameter#): C_* parameters from system.mhs. The C_ prefix is
- dropped from the parameter name, the name is converted
- to lowercase and all underscore '_' characters are
- converted to dashes '-'.
- (baseaddr): the baseaddr parameter value (often named C_BASEADDR).
- (HW_VER): from the HW_VER parameter.
- (size): the address range size (often C_HIGHADDR - C_BASEADDR + 1).
-
- Typically, the compatible list will include the exact IP core version
- followed by an older IP core version which implements the same
- interface or any other device with the same interface.
-
- 'reg', 'interrupt-parent' and 'interrupts' are all optional properties.
-
- For example, the following block from system.mhs:
-
- BEGIN opb_uartlite
- PARAMETER INSTANCE = opb_uartlite_0
- PARAMETER HW_VER = 1.00.b
- PARAMETER C_BAUDRATE = 115200
- PARAMETER C_DATA_BITS = 8
- PARAMETER C_ODD_PARITY = 0
- PARAMETER C_USE_PARITY = 0
- PARAMETER C_CLK_FREQ = 50000000
- PARAMETER C_BASEADDR = 0xEC100000
- PARAMETER C_HIGHADDR = 0xEC10FFFF
- BUS_INTERFACE SOPB = opb_7
- PORT OPB_Clk = CLK_50MHz
- PORT Interrupt = opb_uartlite_0_Interrupt
- PORT RX = opb_uartlite_0_RX
- PORT TX = opb_uartlite_0_TX
- PORT OPB_Rst = sys_bus_reset_0
- END
-
- becomes the following device tree node:
-
- opb_uartlite_0: serial@ec100000 {
- device_type = "serial";
- compatible = "xlnx,opb-uartlite-1.00.b";
- reg = <ec100000 10000>;
- interrupt-parent = <&opb_intc_0>;
- interrupts = <1 0>; // got this from the opb_intc parameters
- current-speed = <d#115200>; // standard serial device prop
- clock-frequency = <d#50000000>; // standard serial device prop
- xlnx,data-bits = <8>;
- xlnx,odd-parity = <0>;
- xlnx,use-parity = <0>;
- };
-
- Some IP cores actually implement 2 or more logical devices. In
- this case, the device should still describe the whole IP core with
- a single node and add a child node for each logical device. The
- ranges property can be used to translate from parent IP-core to the
- registers of each device. In addition, the parent node should be
- compatible with the bus type 'xlnx,compound', and should contain
- #address-cells and #size-cells, as with any other bus. (Note: this
- makes the assumption that both logical devices have the same bus
- binding. If this is not true, then separate nodes should be used
- for each logical device). The 'cell-index' property can be used to
- enumerate logical devices within an IP core. For example, the
- following is the system.mhs entry for the dual ps2 controller found
- on the ml403 reference design.
-
- BEGIN opb_ps2_dual_ref
- PARAMETER INSTANCE = opb_ps2_dual_ref_0
- PARAMETER HW_VER = 1.00.a
- PARAMETER C_BASEADDR = 0xA9000000
- PARAMETER C_HIGHADDR = 0xA9001FFF
- BUS_INTERFACE SOPB = opb_v20_0
- PORT Sys_Intr1 = ps2_1_intr
- PORT Sys_Intr2 = ps2_2_intr
- PORT Clkin1 = ps2_clk_rx_1
- PORT Clkin2 = ps2_clk_rx_2
- PORT Clkpd1 = ps2_clk_tx_1
- PORT Clkpd2 = ps2_clk_tx_2
- PORT Rx1 = ps2_d_rx_1
- PORT Rx2 = ps2_d_rx_2
- PORT Txpd1 = ps2_d_tx_1
- PORT Txpd2 = ps2_d_tx_2
- END
-
- It would result in the following device tree nodes:
-
- opb_ps2_dual_ref_0: opb-ps2-dual-ref@a9000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "xlnx,compound";
- ranges = <0 a9000000 2000>;
- // If this device had extra parameters, then they would
- // go here.
- ps2@0 {
- compatible = "xlnx,opb-ps2-dual-ref-1.00.a";
- reg = <0 40>;
- interrupt-parent = <&opb_intc_0>;
- interrupts = <3 0>;
- cell-index = <0>;
- };
- ps2@1000 {
- compatible = "xlnx,opb-ps2-dual-ref-1.00.a";
- reg = <1000 40>;
- interrupt-parent = <&opb_intc_0>;
- interrupts = <3 0>;
- cell-index = <0>;
- };
- };
-
- Also, the system.mhs file defines bus attachments from the processor
- to the devices. The device tree structure should reflect the bus
- attachments. Again an example; this system.mhs fragment:
-
- BEGIN ppc405_virtex4
- PARAMETER INSTANCE = ppc405_0
- PARAMETER HW_VER = 1.01.a
- BUS_INTERFACE DPLB = plb_v34_0
- BUS_INTERFACE IPLB = plb_v34_0
- END
-
- BEGIN opb_intc
- PARAMETER INSTANCE = opb_intc_0
- PARAMETER HW_VER = 1.00.c
- PARAMETER C_BASEADDR = 0xD1000FC0
- PARAMETER C_HIGHADDR = 0xD1000FDF
- BUS_INTERFACE SOPB = opb_v20_0
- END
-
- BEGIN opb_uart16550
- PARAMETER INSTANCE = opb_uart16550_0
- PARAMETER HW_VER = 1.00.d
- PARAMETER C_BASEADDR = 0xa0000000
- PARAMETER C_HIGHADDR = 0xa0001FFF
- BUS_INTERFACE SOPB = opb_v20_0
- END
-
- BEGIN plb_v34
- PARAMETER INSTANCE = plb_v34_0
- PARAMETER HW_VER = 1.02.a
- END
-
- BEGIN plb_bram_if_cntlr
- PARAMETER INSTANCE = plb_bram_if_cntlr_0
- PARAMETER HW_VER = 1.00.b
- PARAMETER C_BASEADDR = 0xFFFF0000
- PARAMETER C_HIGHADDR = 0xFFFFFFFF
- BUS_INTERFACE SPLB = plb_v34_0
- END
-
- BEGIN plb2opb_bridge
- PARAMETER INSTANCE = plb2opb_bridge_0
- PARAMETER HW_VER = 1.01.a
- PARAMETER C_RNG0_BASEADDR = 0x20000000
- PARAMETER C_RNG0_HIGHADDR = 0x3FFFFFFF
- PARAMETER C_RNG1_BASEADDR = 0x60000000
- PARAMETER C_RNG1_HIGHADDR = 0x7FFFFFFF
- PARAMETER C_RNG2_BASEADDR = 0x80000000
- PARAMETER C_RNG2_HIGHADDR = 0xBFFFFFFF
- PARAMETER C_RNG3_BASEADDR = 0xC0000000
- PARAMETER C_RNG3_HIGHADDR = 0xDFFFFFFF
- BUS_INTERFACE SPLB = plb_v34_0
- BUS_INTERFACE MOPB = opb_v20_0
- END
-
- Gives this device tree (some properties removed for clarity):
-
- plb@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "xlnx,plb-v34-1.02.a";
- device_type = "ibm,plb";
- ranges; // 1:1 translation
-
- plb_bram_if_cntrl_0: bram@ffff0000 {
- reg = <ffff0000 10000>;
- }
-
- opb@20000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <20000000 20000000 20000000
- 60000000 60000000 20000000
- 80000000 80000000 40000000
- c0000000 c0000000 20000000>;
-
- opb_uart16550_0: serial@a0000000 {
- reg = <a00000000 2000>;
- };
-
- opb_intc_0: interrupt-controller@d1000fc0 {
- reg = <d1000fc0 20>;
- };
- };
- };
-
- That covers the general approach to binding xilinx IP cores into the
- device tree. The following are bindings for specific devices:
-
- i) Xilinx ML300 Framebuffer
-
- Simple framebuffer device from the ML300 reference design (also on the
- ML403 reference design as well as others).
-
- Optional properties:
- - resolution = <xres yres> : pixel resolution of framebuffer. Some
- implementations use a different resolution.
- Default is <d#640 d#480>
- - virt-resolution = <xvirt yvirt> : Size of framebuffer in memory.
- Default is <d#1024 d#480>.
- - rotate-display (empty) : rotate display 180 degrees.
-
- ii) Xilinx SystemACE
-
- The Xilinx SystemACE device is used to program FPGAs from an FPGA
- bitstream stored on a CF card. It can also be used as a generic CF
- interface device.
-
- Optional properties:
- - 8-bit (empty) : Set this property for SystemACE in 8 bit mode
-
- iii) Xilinx EMAC and Xilinx TEMAC
-
- Xilinx Ethernet devices. In addition to general xilinx properties
- listed above, nodes for these devices should include a phy-handle
- property, and may include other common network device properties
- like local-mac-address.
-
- iv) Xilinx Uartlite
-
- Xilinx uartlite devices are simple fixed speed serial ports.
-
- Required properties:
- - current-speed : Baud rate of uartlite
-
- v) Xilinx hwicap
-
- Xilinx hwicap devices provide access to the configuration logic
- of the FPGA through the Internal Configuration Access Port
- (ICAP). The ICAP enables partial reconfiguration of the FPGA,
- readback of the configuration information, and some control over
- 'warm boots' of the FPGA fabric.
-
- Required properties:
- - xlnx,family : The family of the FPGA, necessary since the
- capabilities of the underlying ICAP hardware
- differ between different families. May be
- 'virtex2p', 'virtex4', or 'virtex5'.
-
- vi) Xilinx Uart 16550
-
- Xilinx UART 16550 devices are very similar to the NS16550 but with
- different register spacing and an offset from the base address.
-
- Required properties:
- - clock-frequency : Frequency of the clock input
- - reg-offset : A value of 3 is required
- - reg-shift : A value of 2 is required
-
- e) USB EHCI controllers
-
- Required properties:
- - compatible : should be "usb-ehci".
- - reg : should contain at least address and length of the standard EHCI
- register set for the device. Optional platform-dependent registers
- (debug-port or other) can be also specified here, but only after
- definition of standard EHCI registers.
- - interrupts : one EHCI interrupt should be described here.
- If device registers are implemented in big endian mode, the device
- node should have "big-endian-regs" property.
- If controller implementation operates with big endian descriptors,
- "big-endian-desc" property should be specified.
- If both big endian registers and descriptors are used by the controller
- implementation, "big-endian" property can be specified instead of having
- both "big-endian-regs" and "big-endian-desc".
-
- Example (Sequoia 440EPx):
- ehci@e0000300 {
- compatible = "ibm,usb-ehci-440epx", "usb-ehci";
- interrupt-parent = <&UIC0>;
- interrupts = <1a 4>;
- reg = <0 e0000300 90 0 e0000390 70>;
- big-endian;
- };
-
- f) MDIO on GPIOs
-
- Currently defined compatibles:
- - virtual,gpio-mdio
-
- MDC and MDIO lines connected to GPIO controllers are listed in the
- gpios property as described in section VIII.1 in the following order:
-
- MDC, MDIO.
-
- Example:
-
- mdio {
- compatible = "virtual,mdio-gpio";
- #address-cells = <1>;
- #size-cells = <0>;
- gpios = <&qe_pio_a 11
- &qe_pio_c 6>;
- };
-
- g) SPI (Serial Peripheral Interface) busses
-
- SPI busses can be described with a node for the SPI master device
- and a set of child nodes for each SPI slave on the bus. For this
- discussion, it is assumed that the system's SPI controller is in
- SPI master mode. This binding does not describe SPI controllers
- in slave mode.
-
- The SPI master node requires the following properties:
- - #address-cells - number of cells required to define a chip select
- address on the SPI bus.
- - #size-cells - should be zero.
- - compatible - name of SPI bus controller following generic names
- recommended practice.
- No other properties are required in the SPI bus node. It is assumed
- that a driver for an SPI bus device will understand that it is an SPI bus.
- However, the binding does not attempt to define the specific method for
- assigning chip select numbers. Since SPI chip select configuration is
- flexible and non-standardized, it is left out of this binding with the
- assumption that board specific platform code will be used to manage
- chip selects. Individual drivers can define additional properties to
- support describing the chip select layout.
-
- SPI slave nodes must be children of the SPI master node and can
- contain the following properties.
- - reg - (required) chip select address of device.
- - compatible - (required) name of SPI device following generic names
- recommended practice
- - spi-max-frequency - (required) Maximum SPI clocking speed of device in Hz
- - spi-cpol - (optional) Empty property indicating device requires
- inverse clock polarity (CPOL) mode
- - spi-cpha - (optional) Empty property indicating device requires
- shifted clock phase (CPHA) mode
- - spi-cs-high - (optional) Empty property indicating device requires
- chip select active high
-
- SPI example for an MPC5200 SPI bus:
- spi@f00 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
- reg = <0xf00 0x20>;
- interrupts = <2 13 0 2 14 0>;
- interrupt-parent = <&mpc5200_pic>;
-
- ethernet-switch@0 {
- compatible = "micrel,ks8995m";
- spi-max-frequency = <1000000>;
- reg = <0>;
- };
-
- codec@1 {
- compatible = "ti,tlv320aic26";
- spi-max-frequency = <100000>;
- reg = <1>;
- };
- };
-
-VII - Marvell Discovery mv64[345]6x System Controller chips
-===========================================================
-
-The Marvell mv64[345]60 series of system controller chips contain
-many of the peripherals needed to implement a complete computer
-system. In this section, we define device tree nodes to describe
-the system controller chip itself and each of the peripherals
-which it contains. Compatible string values for each node are
-prefixed with the string "marvell,", for Marvell Technology Group Ltd.
-
-1) The /system-controller node
-
- This node is used to represent the system-controller and must be
- present when the system uses a system controller chip. The top-level
- system-controller node contains information that is global to all
- devices within the system controller chip. The node name begins
- with "system-controller" followed by the unit address, which is
- the base address of the memory-mapped register set for the system
- controller chip.
-
- Required properties:
-
- - ranges : Describes the translation of system controller addresses
- for memory mapped registers.
- - clock-frequency: Contains the main clock frequency for the system
- controller chip.
- - reg : This property defines the address and size of the
- memory-mapped registers contained within the system controller
- chip. The address specified in the "reg" property should match
- the unit address of the system-controller node.
- - #address-cells : Address representation for system controller
- devices. This field represents the number of cells needed to
- represent the address of the memory-mapped registers of devices
- within the system controller chip.
- - #size-cells : Size representation for for the memory-mapped
- registers within the system controller chip.
- - #interrupt-cells : Defines the width of cells used to represent
- interrupts.
-
- Optional properties:
-
- - model : The specific model of the system controller chip. Such
- as, "mv64360", "mv64460", or "mv64560".
- - compatible : A string identifying the compatibility identifiers
- of the system controller chip.
-
- The system-controller node contains child nodes for each system
- controller device that the platform uses. Nodes should not be created
- for devices which exist on the system controller chip but are not used
-
- Example Marvell Discovery mv64360 system-controller node:
-
- system-controller@f1000000 { /* Marvell Discovery mv64360 */
- #address-cells = <1>;
- #size-cells = <1>;
- model = "mv64360"; /* Default */
- compatible = "marvell,mv64360";
- clock-frequency = <133333333>;
- reg = <0xf1000000 0x10000>;
- virtual-reg = <0xf1000000>;
- ranges = <0x88000000 0x88000000 0x1000000 /* PCI 0 I/O Space */
- 0x80000000 0x80000000 0x8000000 /* PCI 0 MEM Space */
- 0xa0000000 0xa0000000 0x4000000 /* User FLASH */
- 0x00000000 0xf1000000 0x0010000 /* Bridge's regs */
- 0xf2000000 0xf2000000 0x0040000>;/* Integrated SRAM */
-
- [ child node definitions... ]
- }
-
-2) Child nodes of /system-controller
-
- a) Marvell Discovery MDIO bus
-
- The MDIO is a bus to which the PHY devices are connected. For each
- device that exists on this bus, a child node should be created. See
- the definition of the PHY node below for an example of how to define
- a PHY.
-
- Required properties:
- - #address-cells : Should be <1>
- - #size-cells : Should be <0>
- - device_type : Should be "mdio"
- - compatible : Should be "marvell,mv64360-mdio"
-
- Example:
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- device_type = "mdio";
- compatible = "marvell,mv64360-mdio";
-
- ethernet-phy@0 {
- ......
- };
- };
-
-
- b) Marvell Discovery ethernet controller
-
- The Discover ethernet controller is described with two levels
- of nodes. The first level describes an ethernet silicon block
- and the second level describes up to 3 ethernet nodes within
- that block. The reason for the multiple levels is that the
- registers for the node are interleaved within a single set
- of registers. The "ethernet-block" level describes the
- shared register set, and the "ethernet" nodes describe ethernet
- port-specific properties.
-
- Ethernet block node
-
- Required properties:
- - #address-cells : <1>
- - #size-cells : <0>
- - compatible : "marvell,mv64360-eth-block"
- - reg : Offset and length of the register set for this block
-
- Example Discovery Ethernet block node:
- ethernet-block@2000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "marvell,mv64360-eth-block";
- reg = <0x2000 0x2000>;
- ethernet@0 {
- .......
- };
- };
-
- Ethernet port node
-
- Required properties:
- - device_type : Should be "network".
- - compatible : Should be "marvell,mv64360-eth".
- - reg : Should be <0>, <1>, or <2>, according to which registers
- within the silicon block the device uses.
- - interrupts : <a> where a is the interrupt number for the port.
- - interrupt-parent : the phandle for the interrupt controller
- that services interrupts for this device.
- - phy : the phandle for the PHY connected to this ethernet
- controller.
- - local-mac-address : 6 bytes, MAC address
-
- Example Discovery Ethernet port node:
- ethernet@0 {
- device_type = "network";
- compatible = "marvell,mv64360-eth";
- reg = <0>;
- interrupts = <32>;
- interrupt-parent = <&PIC>;
- phy = <&PHY0>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- };
-
-
-
- c) Marvell Discovery PHY nodes
-
- Required properties:
- - device_type : Should be "ethernet-phy"
- - interrupts : <a> where a is the interrupt number for this phy.
- - interrupt-parent : the phandle for the interrupt controller that
- services interrupts for this device.
- - reg : The ID number for the phy, usually a small integer
-
- Example Discovery PHY node:
- ethernet-phy@1 {
- device_type = "ethernet-phy";
- compatible = "broadcom,bcm5421";
- interrupts = <76>; /* GPP 12 */
- interrupt-parent = <&PIC>;
- reg = <1>;
- };
-
-
- d) Marvell Discovery SDMA nodes
-
- Represent DMA hardware associated with the MPSC (multiprotocol
- serial controllers).
-
- Required properties:
- - compatible : "marvell,mv64360-sdma"
- - reg : Offset and length of the register set for this device
- - interrupts : <a> where a is the interrupt number for the DMA
- device.
- - interrupt-parent : the phandle for the interrupt controller
- that services interrupts for this device.
-
- Example Discovery SDMA node:
- sdma@4000 {
- compatible = "marvell,mv64360-sdma";
- reg = <0x4000 0xc18>;
- virtual-reg = <0xf1004000>;
- interrupts = <36>;
- interrupt-parent = <&PIC>;
- };
-
-
- e) Marvell Discovery BRG nodes
-
- Represent baud rate generator hardware associated with the MPSC
- (multiprotocol serial controllers).
-
- Required properties:
- - compatible : "marvell,mv64360-brg"
- - reg : Offset and length of the register set for this device
- - clock-src : A value from 0 to 15 which selects the clock
- source for the baud rate generator. This value corresponds
- to the CLKS value in the BRGx configuration register. See
- the mv64x60 User's Manual.
- - clock-frequence : The frequency (in Hz) of the baud rate
- generator's input clock.
- - current-speed : The current speed setting (presumably by
- firmware) of the baud rate generator.
-
- Example Discovery BRG node:
- brg@b200 {
- compatible = "marvell,mv64360-brg";
- reg = <0xb200 0x8>;
- clock-src = <8>;
- clock-frequency = <133333333>;
- current-speed = <9600>;
- };
-
-
- f) Marvell Discovery CUNIT nodes
-
- Represent the Serial Communications Unit device hardware.
-
- Required properties:
- - reg : Offset and length of the register set for this device
-
- Example Discovery CUNIT node:
- cunit@f200 {
- reg = <0xf200 0x200>;
- };
-
-
- g) Marvell Discovery MPSCROUTING nodes
-
- Represent the Discovery's MPSC routing hardware
-
- Required properties:
- - reg : Offset and length of the register set for this device
-
- Example Discovery CUNIT node:
- mpscrouting@b500 {
- reg = <0xb400 0xc>;
- };
-
-
- h) Marvell Discovery MPSCINTR nodes
-
- Represent the Discovery's MPSC DMA interrupt hardware registers
- (SDMA cause and mask registers).
-
- Required properties:
- - reg : Offset and length of the register set for this device
-
- Example Discovery MPSCINTR node:
- mpsintr@b800 {
- reg = <0xb800 0x100>;
- };
-
-
- i) Marvell Discovery MPSC nodes
-
- Represent the Discovery's MPSC (Multiprotocol Serial Controller)
- serial port.
-
- Required properties:
- - device_type : "serial"
- - compatible : "marvell,mv64360-mpsc"
- - reg : Offset and length of the register set for this device
- - sdma : the phandle for the SDMA node used by this port
- - brg : the phandle for the BRG node used by this port
- - cunit : the phandle for the CUNIT node used by this port
- - mpscrouting : the phandle for the MPSCROUTING node used by this port
- - mpscintr : the phandle for the MPSCINTR node used by this port
- - cell-index : the hardware index of this cell in the MPSC core
- - max_idle : value needed for MPSC CHR3 (Maximum Frame Length)
- register
- - interrupts : <a> where a is the interrupt number for the MPSC.
- - interrupt-parent : the phandle for the interrupt controller
- that services interrupts for this device.
-
- Example Discovery MPSCINTR node:
- mpsc@8000 {
- device_type = "serial";
- compatible = "marvell,mv64360-mpsc";
- reg = <0x8000 0x38>;
- virtual-reg = <0xf1008000>;
- sdma = <&SDMA0>;
- brg = <&BRG0>;
- cunit = <&CUNIT>;
- mpscrouting = <&MPSCROUTING>;
- mpscintr = <&MPSCINTR>;
- cell-index = <0>;
- max_idle = <40>;
- interrupts = <40>;
- interrupt-parent = <&PIC>;
- };
-
-
- j) Marvell Discovery Watch Dog Timer nodes
-
- Represent the Discovery's watchdog timer hardware
-
- Required properties:
- - compatible : "marvell,mv64360-wdt"
- - reg : Offset and length of the register set for this device
-
- Example Discovery Watch Dog Timer node:
- wdt@b410 {
- compatible = "marvell,mv64360-wdt";
- reg = <0xb410 0x8>;
- };
-
-
- k) Marvell Discovery I2C nodes
-
- Represent the Discovery's I2C hardware
-
- Required properties:
- - device_type : "i2c"
- - compatible : "marvell,mv64360-i2c"
- - reg : Offset and length of the register set for this device
- - interrupts : <a> where a is the interrupt number for the I2C.
- - interrupt-parent : the phandle for the interrupt controller
- that services interrupts for this device.
-
- Example Discovery I2C node:
- compatible = "marvell,mv64360-i2c";
- reg = <0xc000 0x20>;
- virtual-reg = <0xf100c000>;
- interrupts = <37>;
- interrupt-parent = <&PIC>;
- };
-
-
- l) Marvell Discovery PIC (Programmable Interrupt Controller) nodes
-
- Represent the Discovery's PIC hardware
-
- Required properties:
- - #interrupt-cells : <1>
- - #address-cells : <0>
- - compatible : "marvell,mv64360-pic"
- - reg : Offset and length of the register set for this device
- - interrupt-controller
-
- Example Discovery PIC node:
- pic {
- #interrupt-cells = <1>;
- #address-cells = <0>;
- compatible = "marvell,mv64360-pic";
- reg = <0x0 0x88>;
- interrupt-controller;
- };
-
-
- m) Marvell Discovery MPP (Multipurpose Pins) multiplexing nodes
-
- Represent the Discovery's MPP hardware
-
- Required properties:
- - compatible : "marvell,mv64360-mpp"
- - reg : Offset and length of the register set for this device
-
- Example Discovery MPP node:
- mpp@f000 {
- compatible = "marvell,mv64360-mpp";
- reg = <0xf000 0x10>;
- };
-
-
- n) Marvell Discovery GPP (General Purpose Pins) nodes
-
- Represent the Discovery's GPP hardware
-
- Required properties:
- - compatible : "marvell,mv64360-gpp"
- - reg : Offset and length of the register set for this device
-
- Example Discovery GPP node:
- gpp@f000 {
- compatible = "marvell,mv64360-gpp";
- reg = <0xf100 0x20>;
- };
-
-
- o) Marvell Discovery PCI host bridge node
-
- Represents the Discovery's PCI host bridge device. The properties
- for this node conform to Rev 2.1 of the PCI Bus Binding to IEEE
- 1275-1994. A typical value for the compatible property is
- "marvell,mv64360-pci".
-
- Example Discovery PCI host bridge node
- pci@80000000 {
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- device_type = "pci";
- compatible = "marvell,mv64360-pci";
- reg = <0xcf8 0x8>;
- ranges = <0x01000000 0x0 0x0
- 0x88000000 0x0 0x01000000
- 0x02000000 0x0 0x80000000
- 0x80000000 0x0 0x08000000>;
- bus-range = <0 255>;
- clock-frequency = <66000000>;
- interrupt-parent = <&PIC>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0a */
- 0x5000 0 0 1 &PIC 80
- 0x5000 0 0 2 &PIC 81
- 0x5000 0 0 3 &PIC 91
- 0x5000 0 0 4 &PIC 93
-
- /* IDSEL 0x0b */
- 0x5800 0 0 1 &PIC 91
- 0x5800 0 0 2 &PIC 93
- 0x5800 0 0 3 &PIC 80
- 0x5800 0 0 4 &PIC 81
-
- /* IDSEL 0x0c */
- 0x6000 0 0 1 &PIC 91
- 0x6000 0 0 2 &PIC 93
- 0x6000 0 0 3 &PIC 80
- 0x6000 0 0 4 &PIC 81
-
- /* IDSEL 0x0d */
- 0x6800 0 0 1 &PIC 93
- 0x6800 0 0 2 &PIC 80
- 0x6800 0 0 3 &PIC 81
- 0x6800 0 0 4 &PIC 91
- >;
- };
-
-
- p) Marvell Discovery CPU Error nodes
-
- Represent the Discovery's CPU error handler device.
-
- Required properties:
- - compatible : "marvell,mv64360-cpu-error"
- - reg : Offset and length of the register set for this device
- - interrupts : the interrupt number for this device
- - interrupt-parent : the phandle for the interrupt controller
- that services interrupts for this device.
-
- Example Discovery CPU Error node:
- cpu-error@0070 {
- compatible = "marvell,mv64360-cpu-error";
- reg = <0x70 0x10 0x128 0x28>;
- interrupts = <3>;
- interrupt-parent = <&PIC>;
- };
-
-
- q) Marvell Discovery SRAM Controller nodes
-
- Represent the Discovery's SRAM controller device.
-
- Required properties:
- - compatible : "marvell,mv64360-sram-ctrl"
- - reg : Offset and length of the register set for this device
- - interrupts : the interrupt number for this device
- - interrupt-parent : the phandle for the interrupt controller
- that services interrupts for this device.
-
- Example Discovery SRAM Controller node:
- sram-ctrl@0380 {
- compatible = "marvell,mv64360-sram-ctrl";
- reg = <0x380 0x80>;
- interrupts = <13>;
- interrupt-parent = <&PIC>;
- };
-
-
- r) Marvell Discovery PCI Error Handler nodes
-
- Represent the Discovery's PCI error handler device.
-
- Required properties:
- - compatible : "marvell,mv64360-pci-error"
- - reg : Offset and length of the register set for this device
- - interrupts : the interrupt number for this device
- - interrupt-parent : the phandle for the interrupt controller
- that services interrupts for this device.
-
- Example Discovery PCI Error Handler node:
- pci-error@1d40 {
- compatible = "marvell,mv64360-pci-error";
- reg = <0x1d40 0x40 0xc28 0x4>;
- interrupts = <12>;
- interrupt-parent = <&PIC>;
- };
-
-
- s) Marvell Discovery Memory Controller nodes
-
- Represent the Discovery's memory controller device.
-
- Required properties:
- - compatible : "marvell,mv64360-mem-ctrl"
- - reg : Offset and length of the register set for this device
- - interrupts : the interrupt number for this device
- - interrupt-parent : the phandle for the interrupt controller
- that services interrupts for this device.
-
- Example Discovery Memory Controller node:
- mem-ctrl@1400 {
- compatible = "marvell,mv64360-mem-ctrl";
- reg = <0x1400 0x60>;
- interrupts = <17>;
- interrupt-parent = <&PIC>;
- };
-
-
-VIII - Specifying interrupt information for devices
+VII - Specifying interrupt information for devices
===================================================
The device tree represents the busses and devices of a hardware
@@ -2439,56 +1324,7 @@
2 = high to low edge sensitive type enabled
3 = low to high edge sensitive type enabled
-IX - Specifying GPIO information for devices
-============================================
-
-1) gpios property
------------------
-
-Nodes that makes use of GPIOs should define them using `gpios' property,
-format of which is: <&gpio-controller1-phandle gpio1-specifier
- &gpio-controller2-phandle gpio2-specifier
- 0 /* holes are permitted, means no GPIO 3 */
- &gpio-controller4-phandle gpio4-specifier
- ...>;
-
-Note that gpio-specifier length is controller dependent.
-
-gpio-specifier may encode: bank, pin position inside the bank,
-whether pin is open-drain and whether pin is logically inverted.
-
-Example of the node using GPIOs:
-
- node {
- gpios = <&qe_pio_e 18 0>;
- };
-
-In this example gpio-specifier is "18 0" and encodes GPIO pin number,
-and empty GPIO flags as accepted by the "qe_pio_e" gpio-controller.
-
-2) gpio-controller nodes
-------------------------
-
-Every GPIO controller node must have #gpio-cells property defined,
-this information will be used to translate gpio-specifiers.
-
-Example of two SOC GPIO banks defined as gpio-controller nodes:
-
- qe_pio_a: gpio-controller@1400 {
- #gpio-cells = <2>;
- compatible = "fsl,qe-pario-bank-a", "fsl,qe-pario-bank";
- reg = <0x1400 0x18>;
- gpio-controller;
- };
-
- qe_pio_e: gpio-controller@1460 {
- #gpio-cells = <2>;
- compatible = "fsl,qe-pario-bank-e", "fsl,qe-pario-bank";
- reg = <0x1460 0x18>;
- gpio-controller;
- };
-
-X - Specifying Device Power Management Information (sleep property)
+VIII - Specifying Device Power Management Information (sleep property)
===================================================================
Devices on SOCs often have mechanisms for placing devices into low-power
diff --git a/Documentation/powerpc/dts-bindings/4xx/emac.txt b/Documentation/powerpc/dts-bindings/4xx/emac.txt
new file mode 100644
index 0000000..2161334a
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/4xx/emac.txt
@@ -0,0 +1,148 @@
+ 4xx/Axon EMAC ethernet nodes
+
+ The EMAC ethernet controller in IBM and AMCC 4xx chips, and also
+ the Axon bridge. To operate this needs to interact with a ths
+ special McMAL DMA controller, and sometimes an RGMII or ZMII
+ interface. In addition to the nodes and properties described
+ below, the node for the OPB bus on which the EMAC sits must have a
+ correct clock-frequency property.
+
+ i) The EMAC node itself
+
+ Required properties:
+ - device_type : "network"
+
+ - compatible : compatible list, contains 2 entries, first is
+ "ibm,emac-CHIP" where CHIP is the host ASIC (440gx,
+ 405gp, Axon) and second is either "ibm,emac" or
+ "ibm,emac4". For Axon, thus, we have: "ibm,emac-axon",
+ "ibm,emac4"
+ - interrupts : <interrupt mapping for EMAC IRQ and WOL IRQ>
+ - interrupt-parent : optional, if needed for interrupt mapping
+ - reg : <registers mapping>
+ - local-mac-address : 6 bytes, MAC address
+ - mal-device : phandle of the associated McMAL node
+ - mal-tx-channel : 1 cell, index of the tx channel on McMAL associated
+ with this EMAC
+ - mal-rx-channel : 1 cell, index of the rx channel on McMAL associated
+ with this EMAC
+ - cell-index : 1 cell, hardware index of the EMAC cell on a given
+ ASIC (typically 0x0 and 0x1 for EMAC0 and EMAC1 on
+ each Axon chip)
+ - max-frame-size : 1 cell, maximum frame size supported in bytes
+ - rx-fifo-size : 1 cell, Rx fifo size in bytes for 10 and 100 Mb/sec
+ operations.
+ For Axon, 2048
+ - tx-fifo-size : 1 cell, Tx fifo size in bytes for 10 and 100 Mb/sec
+ operations.
+ For Axon, 2048.
+ - fifo-entry-size : 1 cell, size of a fifo entry (used to calculate
+ thresholds).
+ For Axon, 0x00000010
+ - mal-burst-size : 1 cell, MAL burst size (used to calculate thresholds)
+ in bytes.
+ For Axon, 0x00000100 (I think ...)
+ - phy-mode : string, mode of operations of the PHY interface.
+ Supported values are: "mii", "rmii", "smii", "rgmii",
+ "tbi", "gmii", rtbi", "sgmii".
+ For Axon on CAB, it is "rgmii"
+ - mdio-device : 1 cell, required iff using shared MDIO registers
+ (440EP). phandle of the EMAC to use to drive the
+ MDIO lines for the PHY used by this EMAC.
+ - zmii-device : 1 cell, required iff connected to a ZMII. phandle of
+ the ZMII device node
+ - zmii-channel : 1 cell, required iff connected to a ZMII. Which ZMII
+ channel or 0xffffffff if ZMII is only used for MDIO.
+ - rgmii-device : 1 cell, required iff connected to an RGMII. phandle
+ of the RGMII device node.
+ For Axon: phandle of plb5/plb4/opb/rgmii
+ - rgmii-channel : 1 cell, required iff connected to an RGMII. Which
+ RGMII channel is used by this EMAC.
+ Fox Axon: present, whatever value is appropriate for each
+ EMAC, that is the content of the current (bogus) "phy-port"
+ property.
+
+ Optional properties:
+ - phy-address : 1 cell, optional, MDIO address of the PHY. If absent,
+ a search is performed.
+ - phy-map : 1 cell, optional, bitmap of addresses to probe the PHY
+ for, used if phy-address is absent. bit 0x00000001 is
+ MDIO address 0.
+ For Axon it can be absent, though my current driver
+ doesn't handle phy-address yet so for now, keep
+ 0x00ffffff in it.
+ - rx-fifo-size-gige : 1 cell, Rx fifo size in bytes for 1000 Mb/sec
+ operations (if absent the value is the same as
+ rx-fifo-size). For Axon, either absent or 2048.
+ - tx-fifo-size-gige : 1 cell, Tx fifo size in bytes for 1000 Mb/sec
+ operations (if absent the value is the same as
+ tx-fifo-size). For Axon, either absent or 2048.
+ - tah-device : 1 cell, optional. If connected to a TAH engine for
+ offload, phandle of the TAH device node.
+ - tah-channel : 1 cell, optional. If appropriate, channel used on the
+ TAH engine.
+
+ Example:
+
+ EMAC0: ethernet@40000800 {
+ device_type = "network";
+ compatible = "ibm,emac-440gp", "ibm,emac";
+ interrupt-parent = <&UIC1>;
+ interrupts = <1c 4 1d 4>;
+ reg = <40000800 70>;
+ local-mac-address = [00 04 AC E3 1B 1E];
+ mal-device = <&MAL0>;
+ mal-tx-channel = <0 1>;
+ mal-rx-channel = <0>;
+ cell-index = <0>;
+ max-frame-size = <5dc>;
+ rx-fifo-size = <1000>;
+ tx-fifo-size = <800>;
+ phy-mode = "rmii";
+ phy-map = <00000001>;
+ zmii-device = <&ZMII0>;
+ zmii-channel = <0>;
+ };
+
+ ii) McMAL node
+
+ Required properties:
+ - device_type : "dma-controller"
+ - compatible : compatible list, containing 2 entries, first is
+ "ibm,mcmal-CHIP" where CHIP is the host ASIC (like
+ emac) and the second is either "ibm,mcmal" or
+ "ibm,mcmal2".
+ For Axon, "ibm,mcmal-axon","ibm,mcmal2"
+ - interrupts : <interrupt mapping for the MAL interrupts sources:
+ 5 sources: tx_eob, rx_eob, serr, txde, rxde>.
+ For Axon: This is _different_ from the current
+ firmware. We use the "delayed" interrupts for txeob
+ and rxeob. Thus we end up with mapping those 5 MPIC
+ interrupts, all level positive sensitive: 10, 11, 32,
+ 33, 34 (in decimal)
+ - dcr-reg : < DCR registers range >
+ - dcr-parent : if needed for dcr-reg
+ - num-tx-chans : 1 cell, number of Tx channels
+ - num-rx-chans : 1 cell, number of Rx channels
+
+ iii) ZMII node
+
+ Required properties:
+ - compatible : compatible list, containing 2 entries, first is
+ "ibm,zmii-CHIP" where CHIP is the host ASIC (like
+ EMAC) and the second is "ibm,zmii".
+ For Axon, there is no ZMII node.
+ - reg : <registers mapping>
+
+ iv) RGMII node
+
+ Required properties:
+ - compatible : compatible list, containing 2 entries, first is
+ "ibm,rgmii-CHIP" where CHIP is the host ASIC (like
+ EMAC) and the second is "ibm,rgmii".
+ For Axon, "ibm,rgmii-axon","ibm,rgmii"
+ - reg : <registers mapping>
+ - revision : as provided by the RGMII new version register if
+ available.
+ For Axon: 0x0000012a
+
diff --git a/Documentation/powerpc/dts-bindings/gpio/gpio.txt b/Documentation/powerpc/dts-bindings/gpio/gpio.txt
new file mode 100644
index 0000000..edaa84d
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/gpio/gpio.txt
@@ -0,0 +1,50 @@
+Specifying GPIO information for devices
+============================================
+
+1) gpios property
+-----------------
+
+Nodes that makes use of GPIOs should define them using `gpios' property,
+format of which is: <&gpio-controller1-phandle gpio1-specifier
+ &gpio-controller2-phandle gpio2-specifier
+ 0 /* holes are permitted, means no GPIO 3 */
+ &gpio-controller4-phandle gpio4-specifier
+ ...>;
+
+Note that gpio-specifier length is controller dependent.
+
+gpio-specifier may encode: bank, pin position inside the bank,
+whether pin is open-drain and whether pin is logically inverted.
+
+Example of the node using GPIOs:
+
+ node {
+ gpios = <&qe_pio_e 18 0>;
+ };
+
+In this example gpio-specifier is "18 0" and encodes GPIO pin number,
+and empty GPIO flags as accepted by the "qe_pio_e" gpio-controller.
+
+2) gpio-controller nodes
+------------------------
+
+Every GPIO controller node must have #gpio-cells property defined,
+this information will be used to translate gpio-specifiers.
+
+Example of two SOC GPIO banks defined as gpio-controller nodes:
+
+ qe_pio_a: gpio-controller@1400 {
+ #gpio-cells = <2>;
+ compatible = "fsl,qe-pario-bank-a", "fsl,qe-pario-bank";
+ reg = <0x1400 0x18>;
+ gpio-controller;
+ };
+
+ qe_pio_e: gpio-controller@1460 {
+ #gpio-cells = <2>;
+ compatible = "fsl,qe-pario-bank-e", "fsl,qe-pario-bank";
+ reg = <0x1460 0x18>;
+ gpio-controller;
+ };
+
+
diff --git a/Documentation/powerpc/dts-bindings/gpio/mdio.txt b/Documentation/powerpc/dts-bindings/gpio/mdio.txt
new file mode 100644
index 0000000..bc954952
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/gpio/mdio.txt
@@ -0,0 +1,19 @@
+MDIO on GPIOs
+
+Currently defined compatibles:
+- virtual,gpio-mdio
+
+MDC and MDIO lines connected to GPIO controllers are listed in the
+gpios property as described in section VIII.1 in the following order:
+
+MDC, MDIO.
+
+Example:
+
+mdio {
+ compatible = "virtual,mdio-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpios = <&qe_pio_a 11
+ &qe_pio_c 6>;
+};
diff --git a/Documentation/powerpc/dts-bindings/marvell.txt b/Documentation/powerpc/dts-bindings/marvell.txt
new file mode 100644
index 0000000..3708a2f
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/marvell.txt
@@ -0,0 +1,521 @@
+Marvell Discovery mv64[345]6x System Controller chips
+===========================================================
+
+The Marvell mv64[345]60 series of system controller chips contain
+many of the peripherals needed to implement a complete computer
+system. In this section, we define device tree nodes to describe
+the system controller chip itself and each of the peripherals
+which it contains. Compatible string values for each node are
+prefixed with the string "marvell,", for Marvell Technology Group Ltd.
+
+1) The /system-controller node
+
+ This node is used to represent the system-controller and must be
+ present when the system uses a system controller chip. The top-level
+ system-controller node contains information that is global to all
+ devices within the system controller chip. The node name begins
+ with "system-controller" followed by the unit address, which is
+ the base address of the memory-mapped register set for the system
+ controller chip.
+
+ Required properties:
+
+ - ranges : Describes the translation of system controller addresses
+ for memory mapped registers.
+ - clock-frequency: Contains the main clock frequency for the system
+ controller chip.
+ - reg : This property defines the address and size of the
+ memory-mapped registers contained within the system controller
+ chip. The address specified in the "reg" property should match
+ the unit address of the system-controller node.
+ - #address-cells : Address representation for system controller
+ devices. This field represents the number of cells needed to
+ represent the address of the memory-mapped registers of devices
+ within the system controller chip.
+ - #size-cells : Size representation for for the memory-mapped
+ registers within the system controller chip.
+ - #interrupt-cells : Defines the width of cells used to represent
+ interrupts.
+
+ Optional properties:
+
+ - model : The specific model of the system controller chip. Such
+ as, "mv64360", "mv64460", or "mv64560".
+ - compatible : A string identifying the compatibility identifiers
+ of the system controller chip.
+
+ The system-controller node contains child nodes for each system
+ controller device that the platform uses. Nodes should not be created
+ for devices which exist on the system controller chip but are not used
+
+ Example Marvell Discovery mv64360 system-controller node:
+
+ system-controller@f1000000 { /* Marvell Discovery mv64360 */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ model = "mv64360"; /* Default */
+ compatible = "marvell,mv64360";
+ clock-frequency = <133333333>;
+ reg = <0xf1000000 0x10000>;
+ virtual-reg = <0xf1000000>;
+ ranges = <0x88000000 0x88000000 0x1000000 /* PCI 0 I/O Space */
+ 0x80000000 0x80000000 0x8000000 /* PCI 0 MEM Space */
+ 0xa0000000 0xa0000000 0x4000000 /* User FLASH */
+ 0x00000000 0xf1000000 0x0010000 /* Bridge's regs */
+ 0xf2000000 0xf2000000 0x0040000>;/* Integrated SRAM */
+
+ [ child node definitions... ]
+ }
+
+2) Child nodes of /system-controller
+
+ a) Marvell Discovery MDIO bus
+
+ The MDIO is a bus to which the PHY devices are connected. For each
+ device that exists on this bus, a child node should be created. See
+ the definition of the PHY node below for an example of how to define
+ a PHY.
+
+ Required properties:
+ - #address-cells : Should be <1>
+ - #size-cells : Should be <0>
+ - device_type : Should be "mdio"
+ - compatible : Should be "marvell,mv64360-mdio"
+
+ Example:
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ device_type = "mdio";
+ compatible = "marvell,mv64360-mdio";
+
+ ethernet-phy@0 {
+ ......
+ };
+ };
+
+
+ b) Marvell Discovery ethernet controller
+
+ The Discover ethernet controller is described with two levels
+ of nodes. The first level describes an ethernet silicon block
+ and the second level describes up to 3 ethernet nodes within
+ that block. The reason for the multiple levels is that the
+ registers for the node are interleaved within a single set
+ of registers. The "ethernet-block" level describes the
+ shared register set, and the "ethernet" nodes describe ethernet
+ port-specific properties.
+
+ Ethernet block node
+
+ Required properties:
+ - #address-cells : <1>
+ - #size-cells : <0>
+ - compatible : "marvell,mv64360-eth-block"
+ - reg : Offset and length of the register set for this block
+
+ Example Discovery Ethernet block node:
+ ethernet-block@2000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "marvell,mv64360-eth-block";
+ reg = <0x2000 0x2000>;
+ ethernet@0 {
+ .......
+ };
+ };
+
+ Ethernet port node
+
+ Required properties:
+ - device_type : Should be "network".
+ - compatible : Should be "marvell,mv64360-eth".
+ - reg : Should be <0>, <1>, or <2>, according to which registers
+ within the silicon block the device uses.
+ - interrupts : <a> where a is the interrupt number for the port.
+ - interrupt-parent : the phandle for the interrupt controller
+ that services interrupts for this device.
+ - phy : the phandle for the PHY connected to this ethernet
+ controller.
+ - local-mac-address : 6 bytes, MAC address
+
+ Example Discovery Ethernet port node:
+ ethernet@0 {
+ device_type = "network";
+ compatible = "marvell,mv64360-eth";
+ reg = <0>;
+ interrupts = <32>;
+ interrupt-parent = <&PIC>;
+ phy = <&PHY0>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ };
+
+
+
+ c) Marvell Discovery PHY nodes
+
+ Required properties:
+ - device_type : Should be "ethernet-phy"
+ - interrupts : <a> where a is the interrupt number for this phy.
+ - interrupt-parent : the phandle for the interrupt controller that
+ services interrupts for this device.
+ - reg : The ID number for the phy, usually a small integer
+
+ Example Discovery PHY node:
+ ethernet-phy@1 {
+ device_type = "ethernet-phy";
+ compatible = "broadcom,bcm5421";
+ interrupts = <76>; /* GPP 12 */
+ interrupt-parent = <&PIC>;
+ reg = <1>;
+ };
+
+
+ d) Marvell Discovery SDMA nodes
+
+ Represent DMA hardware associated with the MPSC (multiprotocol
+ serial controllers).
+
+ Required properties:
+ - compatible : "marvell,mv64360-sdma"
+ - reg : Offset and length of the register set for this device
+ - interrupts : <a> where a is the interrupt number for the DMA
+ device.
+ - interrupt-parent : the phandle for the interrupt controller
+ that services interrupts for this device.
+
+ Example Discovery SDMA node:
+ sdma@4000 {
+ compatible = "marvell,mv64360-sdma";
+ reg = <0x4000 0xc18>;
+ virtual-reg = <0xf1004000>;
+ interrupts = <36>;
+ interrupt-parent = <&PIC>;
+ };
+
+
+ e) Marvell Discovery BRG nodes
+
+ Represent baud rate generator hardware associated with the MPSC
+ (multiprotocol serial controllers).
+
+ Required properties:
+ - compatible : "marvell,mv64360-brg"
+ - reg : Offset and length of the register set for this device
+ - clock-src : A value from 0 to 15 which selects the clock
+ source for the baud rate generator. This value corresponds
+ to the CLKS value in the BRGx configuration register. See
+ the mv64x60 User's Manual.
+ - clock-frequence : The frequency (in Hz) of the baud rate
+ generator's input clock.
+ - current-speed : The current speed setting (presumably by
+ firmware) of the baud rate generator.
+
+ Example Discovery BRG node:
+ brg@b200 {
+ compatible = "marvell,mv64360-brg";
+ reg = <0xb200 0x8>;
+ clock-src = <8>;
+ clock-frequency = <133333333>;
+ current-speed = <9600>;
+ };
+
+
+ f) Marvell Discovery CUNIT nodes
+
+ Represent the Serial Communications Unit device hardware.
+
+ Required properties:
+ - reg : Offset and length of the register set for this device
+
+ Example Discovery CUNIT node:
+ cunit@f200 {
+ reg = <0xf200 0x200>;
+ };
+
+
+ g) Marvell Discovery MPSCROUTING nodes
+
+ Represent the Discovery's MPSC routing hardware
+
+ Required properties:
+ - reg : Offset and length of the register set for this device
+
+ Example Discovery CUNIT node:
+ mpscrouting@b500 {
+ reg = <0xb400 0xc>;
+ };
+
+
+ h) Marvell Discovery MPSCINTR nodes
+
+ Represent the Discovery's MPSC DMA interrupt hardware registers
+ (SDMA cause and mask registers).
+
+ Required properties:
+ - reg : Offset and length of the register set for this device
+
+ Example Discovery MPSCINTR node:
+ mpsintr@b800 {
+ reg = <0xb800 0x100>;
+ };
+
+
+ i) Marvell Discovery MPSC nodes
+
+ Represent the Discovery's MPSC (Multiprotocol Serial Controller)
+ serial port.
+
+ Required properties:
+ - device_type : "serial"
+ - compatible : "marvell,mv64360-mpsc"
+ - reg : Offset and length of the register set for this device
+ - sdma : the phandle for the SDMA node used by this port
+ - brg : the phandle for the BRG node used by this port
+ - cunit : the phandle for the CUNIT node used by this port
+ - mpscrouting : the phandle for the MPSCROUTING node used by this port
+ - mpscintr : the phandle for the MPSCINTR node used by this port
+ - cell-index : the hardware index of this cell in the MPSC core
+ - max_idle : value needed for MPSC CHR3 (Maximum Frame Length)
+ register
+ - interrupts : <a> where a is the interrupt number for the MPSC.
+ - interrupt-parent : the phandle for the interrupt controller
+ that services interrupts for this device.
+
+ Example Discovery MPSCINTR node:
+ mpsc@8000 {
+ device_type = "serial";
+ compatible = "marvell,mv64360-mpsc";
+ reg = <0x8000 0x38>;
+ virtual-reg = <0xf1008000>;
+ sdma = <&SDMA0>;
+ brg = <&BRG0>;
+ cunit = <&CUNIT>;
+ mpscrouting = <&MPSCROUTING>;
+ mpscintr = <&MPSCINTR>;
+ cell-index = <0>;
+ max_idle = <40>;
+ interrupts = <40>;
+ interrupt-parent = <&PIC>;
+ };
+
+
+ j) Marvell Discovery Watch Dog Timer nodes
+
+ Represent the Discovery's watchdog timer hardware
+
+ Required properties:
+ - compatible : "marvell,mv64360-wdt"
+ - reg : Offset and length of the register set for this device
+
+ Example Discovery Watch Dog Timer node:
+ wdt@b410 {
+ compatible = "marvell,mv64360-wdt";
+ reg = <0xb410 0x8>;
+ };
+
+
+ k) Marvell Discovery I2C nodes
+
+ Represent the Discovery's I2C hardware
+
+ Required properties:
+ - device_type : "i2c"
+ - compatible : "marvell,mv64360-i2c"
+ - reg : Offset and length of the register set for this device
+ - interrupts : <a> where a is the interrupt number for the I2C.
+ - interrupt-parent : the phandle for the interrupt controller
+ that services interrupts for this device.
+
+ Example Discovery I2C node:
+ compatible = "marvell,mv64360-i2c";
+ reg = <0xc000 0x20>;
+ virtual-reg = <0xf100c000>;
+ interrupts = <37>;
+ interrupt-parent = <&PIC>;
+ };
+
+
+ l) Marvell Discovery PIC (Programmable Interrupt Controller) nodes
+
+ Represent the Discovery's PIC hardware
+
+ Required properties:
+ - #interrupt-cells : <1>
+ - #address-cells : <0>
+ - compatible : "marvell,mv64360-pic"
+ - reg : Offset and length of the register set for this device
+ - interrupt-controller
+
+ Example Discovery PIC node:
+ pic {
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ compatible = "marvell,mv64360-pic";
+ reg = <0x0 0x88>;
+ interrupt-controller;
+ };
+
+
+ m) Marvell Discovery MPP (Multipurpose Pins) multiplexing nodes
+
+ Represent the Discovery's MPP hardware
+
+ Required properties:
+ - compatible : "marvell,mv64360-mpp"
+ - reg : Offset and length of the register set for this device
+
+ Example Discovery MPP node:
+ mpp@f000 {
+ compatible = "marvell,mv64360-mpp";
+ reg = <0xf000 0x10>;
+ };
+
+
+ n) Marvell Discovery GPP (General Purpose Pins) nodes
+
+ Represent the Discovery's GPP hardware
+
+ Required properties:
+ - compatible : "marvell,mv64360-gpp"
+ - reg : Offset and length of the register set for this device
+
+ Example Discovery GPP node:
+ gpp@f000 {
+ compatible = "marvell,mv64360-gpp";
+ reg = <0xf100 0x20>;
+ };
+
+
+ o) Marvell Discovery PCI host bridge node
+
+ Represents the Discovery's PCI host bridge device. The properties
+ for this node conform to Rev 2.1 of the PCI Bus Binding to IEEE
+ 1275-1994. A typical value for the compatible property is
+ "marvell,mv64360-pci".
+
+ Example Discovery PCI host bridge node
+ pci@80000000 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ compatible = "marvell,mv64360-pci";
+ reg = <0xcf8 0x8>;
+ ranges = <0x01000000 0x0 0x0
+ 0x88000000 0x0 0x01000000
+ 0x02000000 0x0 0x80000000
+ 0x80000000 0x0 0x08000000>;
+ bus-range = <0 255>;
+ clock-frequency = <66000000>;
+ interrupt-parent = <&PIC>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ interrupt-map = <
+ /* IDSEL 0x0a */
+ 0x5000 0 0 1 &PIC 80
+ 0x5000 0 0 2 &PIC 81
+ 0x5000 0 0 3 &PIC 91
+ 0x5000 0 0 4 &PIC 93
+
+ /* IDSEL 0x0b */
+ 0x5800 0 0 1 &PIC 91
+ 0x5800 0 0 2 &PIC 93
+ 0x5800 0 0 3 &PIC 80
+ 0x5800 0 0 4 &PIC 81
+
+ /* IDSEL 0x0c */
+ 0x6000 0 0 1 &PIC 91
+ 0x6000 0 0 2 &PIC 93
+ 0x6000 0 0 3 &PIC 80
+ 0x6000 0 0 4 &PIC 81
+
+ /* IDSEL 0x0d */
+ 0x6800 0 0 1 &PIC 93
+ 0x6800 0 0 2 &PIC 80
+ 0x6800 0 0 3 &PIC 81
+ 0x6800 0 0 4 &PIC 91
+ >;
+ };
+
+
+ p) Marvell Discovery CPU Error nodes
+
+ Represent the Discovery's CPU error handler device.
+
+ Required properties:
+ - compatible : "marvell,mv64360-cpu-error"
+ - reg : Offset and length of the register set for this device
+ - interrupts : the interrupt number for this device
+ - interrupt-parent : the phandle for the interrupt controller
+ that services interrupts for this device.
+
+ Example Discovery CPU Error node:
+ cpu-error@0070 {
+ compatible = "marvell,mv64360-cpu-error";
+ reg = <0x70 0x10 0x128 0x28>;
+ interrupts = <3>;
+ interrupt-parent = <&PIC>;
+ };
+
+
+ q) Marvell Discovery SRAM Controller nodes
+
+ Represent the Discovery's SRAM controller device.
+
+ Required properties:
+ - compatible : "marvell,mv64360-sram-ctrl"
+ - reg : Offset and length of the register set for this device
+ - interrupts : the interrupt number for this device
+ - interrupt-parent : the phandle for the interrupt controller
+ that services interrupts for this device.
+
+ Example Discovery SRAM Controller node:
+ sram-ctrl@0380 {
+ compatible = "marvell,mv64360-sram-ctrl";
+ reg = <0x380 0x80>;
+ interrupts = <13>;
+ interrupt-parent = <&PIC>;
+ };
+
+
+ r) Marvell Discovery PCI Error Handler nodes
+
+ Represent the Discovery's PCI error handler device.
+
+ Required properties:
+ - compatible : "marvell,mv64360-pci-error"
+ - reg : Offset and length of the register set for this device
+ - interrupts : the interrupt number for this device
+ - interrupt-parent : the phandle for the interrupt controller
+ that services interrupts for this device.
+
+ Example Discovery PCI Error Handler node:
+ pci-error@1d40 {
+ compatible = "marvell,mv64360-pci-error";
+ reg = <0x1d40 0x40 0xc28 0x4>;
+ interrupts = <12>;
+ interrupt-parent = <&PIC>;
+ };
+
+
+ s) Marvell Discovery Memory Controller nodes
+
+ Represent the Discovery's memory controller device.
+
+ Required properties:
+ - compatible : "marvell,mv64360-mem-ctrl"
+ - reg : Offset and length of the register set for this device
+ - interrupts : the interrupt number for this device
+ - interrupt-parent : the phandle for the interrupt controller
+ that services interrupts for this device.
+
+ Example Discovery Memory Controller node:
+ mem-ctrl@1400 {
+ compatible = "marvell,mv64360-mem-ctrl";
+ reg = <0x1400 0x60>;
+ interrupts = <17>;
+ interrupt-parent = <&PIC>;
+ };
+
+
diff --git a/Documentation/powerpc/dts-bindings/phy.txt b/Documentation/powerpc/dts-bindings/phy.txt
new file mode 100644
index 0000000..bb8c742
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/phy.txt
@@ -0,0 +1,25 @@
+PHY nodes
+
+Required properties:
+
+ - device_type : Should be "ethernet-phy"
+ - interrupts : <a b> where a is the interrupt number and b is a
+ field that represents an encoding of the sense and level
+ information for the interrupt. This should be encoded based on
+ the information in section 2) depending on the type of interrupt
+ controller you have.
+ - interrupt-parent : the phandle for the interrupt controller that
+ services interrupts for this device.
+ - reg : The ID number for the phy, usually a small integer
+ - linux,phandle : phandle for this node; likely referenced by an
+ ethernet controller node.
+
+Example:
+
+ethernet-phy@0 {
+ linux,phandle = <2452000>
+ interrupt-parent = <40000>;
+ interrupts = <35 1>;
+ reg = <0>;
+ device_type = "ethernet-phy";
+};
diff --git a/Documentation/powerpc/dts-bindings/spi-bus.txt b/Documentation/powerpc/dts-bindings/spi-bus.txt
new file mode 100644
index 0000000..e782add
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/spi-bus.txt
@@ -0,0 +1,57 @@
+SPI (Serial Peripheral Interface) busses
+
+SPI busses can be described with a node for the SPI master device
+and a set of child nodes for each SPI slave on the bus. For this
+discussion, it is assumed that the system's SPI controller is in
+SPI master mode. This binding does not describe SPI controllers
+in slave mode.
+
+The SPI master node requires the following properties:
+- #address-cells - number of cells required to define a chip select
+ address on the SPI bus.
+- #size-cells - should be zero.
+- compatible - name of SPI bus controller following generic names
+ recommended practice.
+No other properties are required in the SPI bus node. It is assumed
+that a driver for an SPI bus device will understand that it is an SPI bus.
+However, the binding does not attempt to define the specific method for
+assigning chip select numbers. Since SPI chip select configuration is
+flexible and non-standardized, it is left out of this binding with the
+assumption that board specific platform code will be used to manage
+chip selects. Individual drivers can define additional properties to
+support describing the chip select layout.
+
+SPI slave nodes must be children of the SPI master node and can
+contain the following properties.
+- reg - (required) chip select address of device.
+- compatible - (required) name of SPI device following generic names
+ recommended practice
+- spi-max-frequency - (required) Maximum SPI clocking speed of device in Hz
+- spi-cpol - (optional) Empty property indicating device requires
+ inverse clock polarity (CPOL) mode
+- spi-cpha - (optional) Empty property indicating device requires
+ shifted clock phase (CPHA) mode
+- spi-cs-high - (optional) Empty property indicating device requires
+ chip select active high
+
+SPI example for an MPC5200 SPI bus:
+ spi@f00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
+ reg = <0xf00 0x20>;
+ interrupts = <2 13 0 2 14 0>;
+ interrupt-parent = <&mpc5200_pic>;
+
+ ethernet-switch@0 {
+ compatible = "micrel,ks8995m";
+ spi-max-frequency = <1000000>;
+ reg = <0>;
+ };
+
+ codec@1 {
+ compatible = "ti,tlv320aic26";
+ spi-max-frequency = <100000>;
+ reg = <1>;
+ };
+ };
diff --git a/Documentation/powerpc/dts-bindings/usb-ehci.txt b/Documentation/powerpc/dts-bindings/usb-ehci.txt
new file mode 100644
index 0000000..fa18612
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/usb-ehci.txt
@@ -0,0 +1,25 @@
+USB EHCI controllers
+
+Required properties:
+ - compatible : should be "usb-ehci".
+ - reg : should contain at least address and length of the standard EHCI
+ register set for the device. Optional platform-dependent registers
+ (debug-port or other) can be also specified here, but only after
+ definition of standard EHCI registers.
+ - interrupts : one EHCI interrupt should be described here.
+If device registers are implemented in big endian mode, the device
+node should have "big-endian-regs" property.
+If controller implementation operates with big endian descriptors,
+"big-endian-desc" property should be specified.
+If both big endian registers and descriptors are used by the controller
+implementation, "big-endian" property can be specified instead of having
+both "big-endian-regs" and "big-endian-desc".
+
+Example (Sequoia 440EPx):
+ ehci@e0000300 {
+ compatible = "ibm,usb-ehci-440epx", "usb-ehci";
+ interrupt-parent = <&UIC0>;
+ interrupts = <1a 4>;
+ reg = <0 e0000300 90 0 e0000390 70>;
+ big-endian;
+ };
diff --git a/Documentation/powerpc/dts-bindings/xilinx.txt b/Documentation/powerpc/dts-bindings/xilinx.txt
new file mode 100644
index 0000000..80339fe
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/xilinx.txt
@@ -0,0 +1,295 @@
+ d) Xilinx IP cores
+
+ The Xilinx EDK toolchain ships with a set of IP cores (devices) for use
+ in Xilinx Spartan and Virtex FPGAs. The devices cover the whole range
+ of standard device types (network, serial, etc.) and miscellaneous
+ devices (gpio, LCD, spi, etc). Also, since these devices are
+ implemented within the fpga fabric every instance of the device can be
+ synthesised with different options that change the behaviour.
+
+ Each IP-core has a set of parameters which the FPGA designer can use to
+ control how the core is synthesized. Historically, the EDK tool would
+ extract the device parameters relevant to device drivers and copy them
+ into an 'xparameters.h' in the form of #define symbols. This tells the
+ device drivers how the IP cores are configured, but it requres the kernel
+ to be recompiled every time the FPGA bitstream is resynthesized.
+
+ The new approach is to export the parameters into the device tree and
+ generate a new device tree each time the FPGA bitstream changes. The
+ parameters which used to be exported as #defines will now become
+ properties of the device node. In general, device nodes for IP-cores
+ will take the following form:
+
+ (name): (generic-name)@(base-address) {
+ compatible = "xlnx,(ip-core-name)-(HW_VER)"
+ [, (list of compatible devices), ...];
+ reg = <(baseaddr) (size)>;
+ interrupt-parent = <&interrupt-controller-phandle>;
+ interrupts = < ... >;
+ xlnx,(parameter1) = "(string-value)";
+ xlnx,(parameter2) = <(int-value)>;
+ };
+
+ (generic-name): an open firmware-style name that describes the
+ generic class of device. Preferably, this is one word, such
+ as 'serial' or 'ethernet'.
+ (ip-core-name): the name of the ip block (given after the BEGIN
+ directive in system.mhs). Should be in lowercase
+ and all underscores '_' converted to dashes '-'.
+ (name): is derived from the "PARAMETER INSTANCE" value.
+ (parameter#): C_* parameters from system.mhs. The C_ prefix is
+ dropped from the parameter name, the name is converted
+ to lowercase and all underscore '_' characters are
+ converted to dashes '-'.
+ (baseaddr): the baseaddr parameter value (often named C_BASEADDR).
+ (HW_VER): from the HW_VER parameter.
+ (size): the address range size (often C_HIGHADDR - C_BASEADDR + 1).
+
+ Typically, the compatible list will include the exact IP core version
+ followed by an older IP core version which implements the same
+ interface or any other device with the same interface.
+
+ 'reg', 'interrupt-parent' and 'interrupts' are all optional properties.
+
+ For example, the following block from system.mhs:
+
+ BEGIN opb_uartlite
+ PARAMETER INSTANCE = opb_uartlite_0
+ PARAMETER HW_VER = 1.00.b
+ PARAMETER C_BAUDRATE = 115200
+ PARAMETER C_DATA_BITS = 8
+ PARAMETER C_ODD_PARITY = 0
+ PARAMETER C_USE_PARITY = 0
+ PARAMETER C_CLK_FREQ = 50000000
+ PARAMETER C_BASEADDR = 0xEC100000
+ PARAMETER C_HIGHADDR = 0xEC10FFFF
+ BUS_INTERFACE SOPB = opb_7
+ PORT OPB_Clk = CLK_50MHz
+ PORT Interrupt = opb_uartlite_0_Interrupt
+ PORT RX = opb_uartlite_0_RX
+ PORT TX = opb_uartlite_0_TX
+ PORT OPB_Rst = sys_bus_reset_0
+ END
+
+ becomes the following device tree node:
+
+ opb_uartlite_0: serial@ec100000 {
+ device_type = "serial";
+ compatible = "xlnx,opb-uartlite-1.00.b";
+ reg = <ec100000 10000>;
+ interrupt-parent = <&opb_intc_0>;
+ interrupts = <1 0>; // got this from the opb_intc parameters
+ current-speed = <d#115200>; // standard serial device prop
+ clock-frequency = <d#50000000>; // standard serial device prop
+ xlnx,data-bits = <8>;
+ xlnx,odd-parity = <0>;
+ xlnx,use-parity = <0>;
+ };
+
+ Some IP cores actually implement 2 or more logical devices. In
+ this case, the device should still describe the whole IP core with
+ a single node and add a child node for each logical device. The
+ ranges property can be used to translate from parent IP-core to the
+ registers of each device. In addition, the parent node should be
+ compatible with the bus type 'xlnx,compound', and should contain
+ #address-cells and #size-cells, as with any other bus. (Note: this
+ makes the assumption that both logical devices have the same bus
+ binding. If this is not true, then separate nodes should be used
+ for each logical device). The 'cell-index' property can be used to
+ enumerate logical devices within an IP core. For example, the
+ following is the system.mhs entry for the dual ps2 controller found
+ on the ml403 reference design.
+
+ BEGIN opb_ps2_dual_ref
+ PARAMETER INSTANCE = opb_ps2_dual_ref_0
+ PARAMETER HW_VER = 1.00.a
+ PARAMETER C_BASEADDR = 0xA9000000
+ PARAMETER C_HIGHADDR = 0xA9001FFF
+ BUS_INTERFACE SOPB = opb_v20_0
+ PORT Sys_Intr1 = ps2_1_intr
+ PORT Sys_Intr2 = ps2_2_intr
+ PORT Clkin1 = ps2_clk_rx_1
+ PORT Clkin2 = ps2_clk_rx_2
+ PORT Clkpd1 = ps2_clk_tx_1
+ PORT Clkpd2 = ps2_clk_tx_2
+ PORT Rx1 = ps2_d_rx_1
+ PORT Rx2 = ps2_d_rx_2
+ PORT Txpd1 = ps2_d_tx_1
+ PORT Txpd2 = ps2_d_tx_2
+ END
+
+ It would result in the following device tree nodes:
+
+ opb_ps2_dual_ref_0: opb-ps2-dual-ref@a9000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "xlnx,compound";
+ ranges = <0 a9000000 2000>;
+ // If this device had extra parameters, then they would
+ // go here.
+ ps2@0 {
+ compatible = "xlnx,opb-ps2-dual-ref-1.00.a";
+ reg = <0 40>;
+ interrupt-parent = <&opb_intc_0>;
+ interrupts = <3 0>;
+ cell-index = <0>;
+ };
+ ps2@1000 {
+ compatible = "xlnx,opb-ps2-dual-ref-1.00.a";
+ reg = <1000 40>;
+ interrupt-parent = <&opb_intc_0>;
+ interrupts = <3 0>;
+ cell-index = <0>;
+ };
+ };
+
+ Also, the system.mhs file defines bus attachments from the processor
+ to the devices. The device tree structure should reflect the bus
+ attachments. Again an example; this system.mhs fragment:
+
+ BEGIN ppc405_virtex4
+ PARAMETER INSTANCE = ppc405_0
+ PARAMETER HW_VER = 1.01.a
+ BUS_INTERFACE DPLB = plb_v34_0
+ BUS_INTERFACE IPLB = plb_v34_0
+ END
+
+ BEGIN opb_intc
+ PARAMETER INSTANCE = opb_intc_0
+ PARAMETER HW_VER = 1.00.c
+ PARAMETER C_BASEADDR = 0xD1000FC0
+ PARAMETER C_HIGHADDR = 0xD1000FDF
+ BUS_INTERFACE SOPB = opb_v20_0
+ END
+
+ BEGIN opb_uart16550
+ PARAMETER INSTANCE = opb_uart16550_0
+ PARAMETER HW_VER = 1.00.d
+ PARAMETER C_BASEADDR = 0xa0000000
+ PARAMETER C_HIGHADDR = 0xa0001FFF
+ BUS_INTERFACE SOPB = opb_v20_0
+ END
+
+ BEGIN plb_v34
+ PARAMETER INSTANCE = plb_v34_0
+ PARAMETER HW_VER = 1.02.a
+ END
+
+ BEGIN plb_bram_if_cntlr
+ PARAMETER INSTANCE = plb_bram_if_cntlr_0
+ PARAMETER HW_VER = 1.00.b
+ PARAMETER C_BASEADDR = 0xFFFF0000
+ PARAMETER C_HIGHADDR = 0xFFFFFFFF
+ BUS_INTERFACE SPLB = plb_v34_0
+ END
+
+ BEGIN plb2opb_bridge
+ PARAMETER INSTANCE = plb2opb_bridge_0
+ PARAMETER HW_VER = 1.01.a
+ PARAMETER C_RNG0_BASEADDR = 0x20000000
+ PARAMETER C_RNG0_HIGHADDR = 0x3FFFFFFF
+ PARAMETER C_RNG1_BASEADDR = 0x60000000
+ PARAMETER C_RNG1_HIGHADDR = 0x7FFFFFFF
+ PARAMETER C_RNG2_BASEADDR = 0x80000000
+ PARAMETER C_RNG2_HIGHADDR = 0xBFFFFFFF
+ PARAMETER C_RNG3_BASEADDR = 0xC0000000
+ PARAMETER C_RNG3_HIGHADDR = 0xDFFFFFFF
+ BUS_INTERFACE SPLB = plb_v34_0
+ BUS_INTERFACE MOPB = opb_v20_0
+ END
+
+ Gives this device tree (some properties removed for clarity):
+
+ plb@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "xlnx,plb-v34-1.02.a";
+ device_type = "ibm,plb";
+ ranges; // 1:1 translation
+
+ plb_bram_if_cntrl_0: bram@ffff0000 {
+ reg = <ffff0000 10000>;
+ }
+
+ opb@20000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <20000000 20000000 20000000
+ 60000000 60000000 20000000
+ 80000000 80000000 40000000
+ c0000000 c0000000 20000000>;
+
+ opb_uart16550_0: serial@a0000000 {
+ reg = <a00000000 2000>;
+ };
+
+ opb_intc_0: interrupt-controller@d1000fc0 {
+ reg = <d1000fc0 20>;
+ };
+ };
+ };
+
+ That covers the general approach to binding xilinx IP cores into the
+ device tree. The following are bindings for specific devices:
+
+ i) Xilinx ML300 Framebuffer
+
+ Simple framebuffer device from the ML300 reference design (also on the
+ ML403 reference design as well as others).
+
+ Optional properties:
+ - resolution = <xres yres> : pixel resolution of framebuffer. Some
+ implementations use a different resolution.
+ Default is <d#640 d#480>
+ - virt-resolution = <xvirt yvirt> : Size of framebuffer in memory.
+ Default is <d#1024 d#480>.
+ - rotate-display (empty) : rotate display 180 degrees.
+
+ ii) Xilinx SystemACE
+
+ The Xilinx SystemACE device is used to program FPGAs from an FPGA
+ bitstream stored on a CF card. It can also be used as a generic CF
+ interface device.
+
+ Optional properties:
+ - 8-bit (empty) : Set this property for SystemACE in 8 bit mode
+
+ iii) Xilinx EMAC and Xilinx TEMAC
+
+ Xilinx Ethernet devices. In addition to general xilinx properties
+ listed above, nodes for these devices should include a phy-handle
+ property, and may include other common network device properties
+ like local-mac-address.
+
+ iv) Xilinx Uartlite
+
+ Xilinx uartlite devices are simple fixed speed serial ports.
+
+ Required properties:
+ - current-speed : Baud rate of uartlite
+
+ v) Xilinx hwicap
+
+ Xilinx hwicap devices provide access to the configuration logic
+ of the FPGA through the Internal Configuration Access Port
+ (ICAP). The ICAP enables partial reconfiguration of the FPGA,
+ readback of the configuration information, and some control over
+ 'warm boots' of the FPGA fabric.
+
+ Required properties:
+ - xlnx,family : The family of the FPGA, necessary since the
+ capabilities of the underlying ICAP hardware
+ differ between different families. May be
+ 'virtex2p', 'virtex4', or 'virtex5'.
+
+ vi) Xilinx Uart 16550
+
+ Xilinx UART 16550 devices are very similar to the NS16550 but with
+ different register spacing and an offset from the base address.
+
+ Required properties:
+ - clock-frequency : Frequency of the clock input
+ - reg-offset : A value of 3 is required
+ - reg-shift : A value of 2 is required
+
+
diff --git a/Documentation/video4linux/CARDLIST.cx88 b/Documentation/video4linux/CARDLIST.cx88
index 89093f5..0736518 100644
--- a/Documentation/video4linux/CARDLIST.cx88
+++ b/Documentation/video4linux/CARDLIST.cx88
@@ -6,8 +6,8 @@
5 -> Leadtek Winfast 2000XP Expert [107d:6611,107d:6613]
6 -> AverTV Studio 303 (M126) [1461:000b]
7 -> MSI TV-@nywhere Master [1462:8606]
- 8 -> Leadtek Winfast DV2000 [107d:6620]
- 9 -> Leadtek PVR 2000 [107d:663b,107d:663c,107d:6632]
+ 8 -> Leadtek Winfast DV2000 [107d:6620,107d:6621]
+ 9 -> Leadtek PVR 2000 [107d:663b,107d:663c,107d:6632,107d:6630,107d:6638,107d:6631,107d:6637,107d:663d]
10 -> IODATA GV-VCP3/PCI [10fc:d003]
11 -> Prolink PlayTV PVR
12 -> ASUS PVR-416 [1043:4823,1461:c111]
@@ -59,7 +59,7 @@
58 -> Pinnacle PCTV HD 800i [11bd:0051]
59 -> DViCO FusionHDTV 5 PCI nano [18ac:d530]
60 -> Pinnacle Hybrid PCTV [12ab:1788]
- 61 -> Winfast TV2000 XP Global [107d:6f18]
+ 61 -> Leadtek TV2000 XP Global [107d:6f18,107d:6618]
62 -> PowerColor RA330 [14f1:ea3d]
63 -> Geniatech X8000-MT DVBT [14f1:8852]
64 -> DViCO FusionHDTV DVB-T PRO [18ac:db30]
diff --git a/Documentation/video4linux/CARDLIST.em28xx b/Documentation/video4linux/CARDLIST.em28xx
index a98a688..873630e 100644
--- a/Documentation/video4linux/CARDLIST.em28xx
+++ b/Documentation/video4linux/CARDLIST.em28xx
@@ -65,3 +65,4 @@
67 -> Terratec Grabby (em2860) [0ccd:0096]
68 -> Terratec AV350 (em2860) [0ccd:0084]
69 -> KWorld ATSC 315U HDTV TV Box (em2882) [eb1a:a313]
+ 70 -> Evga inDtube (em2882)
diff --git a/Documentation/video4linux/v4l2-framework.txt b/Documentation/video4linux/v4l2-framework.txt
index d54c1e4..ba4706a 100644
--- a/Documentation/video4linux/v4l2-framework.txt
+++ b/Documentation/video4linux/v4l2-framework.txt
@@ -390,6 +390,30 @@
To see which chip variants are supported you can look in the i2c driver code
for the i2c_device_id table. This lists all the possibilities.
+There are two more helper functions:
+
+v4l2_i2c_new_subdev_cfg: this function adds new irq and platform_data
+arguments and has both 'addr' and 'probed_addrs' arguments: if addr is not
+0 then that will be used (non-probing variant), otherwise the probed_addrs
+are probed.
+
+For example: this will probe for address 0x10:
+
+struct v4l2_subdev *sd = v4l2_i2c_new_subdev_cfg(v4l2_dev, adapter,
+ "module_foo", "chipid", 0, NULL, 0, I2C_ADDRS(0x10));
+
+v4l2_i2c_new_subdev_board uses an i2c_board_info struct which is passed
+to the i2c driver and replaces the irq, platform_data and addr arguments.
+
+If the subdev supports the s_config core ops, then that op is called with
+the irq and platform_data arguments after the subdev was setup. The older
+v4l2_i2c_new_(probed_)subdev functions will call s_config as well, but with
+irq set to 0 and platform_data set to NULL.
+
+Note that in the next kernel release the functions v4l2_i2c_new_subdev,
+v4l2_i2c_new_probed_subdev and v4l2_i2c_new_probed_subdev_addr will all be
+replaced by a single v4l2_i2c_new_subdev that is identical to
+v4l2_i2c_new_subdev_cfg but without the irq and platform_data arguments.
struct video_device
-------------------
diff --git a/Documentation/watchdog/hpwdt.txt b/Documentation/watchdog/hpwdt.txt
index 127839e..9c24d5f 100644
--- a/Documentation/watchdog/hpwdt.txt
+++ b/Documentation/watchdog/hpwdt.txt
@@ -19,30 +19,41 @@
not be updated in a timely fashion and a hardware system reset (also known as
an Automatic Server Recovery (ASR)) event will occur.
- The hpwdt driver also has three (3) module parameters. They are the following:
+ The hpwdt driver also has four (4) module parameters. They are the following:
soft_margin - allows the user to set the watchdog timer value
allow_kdump - allows the user to save off a kernel dump image after an NMI
nowayout - basic watchdog parameter that does not allow the timer to
be restarted or an impending ASR to be escaped.
+ priority - determines whether or not the hpwdt driver is first on the
+ die_notify list to handle NMIs or last. The default value
+ for this module parameter is 0 or LAST. If the user wants to
+ enable NMI sourcing then reload the hpwdt driver with
+ priority=1 (and boot with nmi_watchdog=0).
NOTE: More information about watchdog drivers in general, including the ioctl
interface to /dev/watchdog can be found in
Documentation/watchdog/watchdog-api.txt and Documentation/IPMI.txt.
- The NMI sourcing capability is disabled when the driver discovers that the
- nmi_watchdog is turned on (nmi_watchdog = 1). This is due to the inability to
+ The priority parameter was introduced due to other kernel software that relied
+ on handling NMIs (like oprofile). Keeping hpwdt's priority at 0 (or LAST)
+ enables the users of NMIs for non critical events to be work as expected.
+
+ The NMI sourcing capability is disabled by default due to the inability to
distinguish between "NMI Watchdog Ticks" and "HW generated NMI events" in the
Linux kernel. What this means is that the hpwdt nmi handler code is called
each time the NMI signal fires off. This could amount to several thousands of
NMIs in a matter of seconds. If a user sees the Linux kernel's "dazed and
confused" message in the logs or if the system gets into a hung state, then
- the user should reboot with nmi_watchdog=0.
+ the hpwdt driver can be reloaded with the "priority" module parameter set
+ (priority=1).
1. If the kernel has not been booted with nmi_watchdog turned off then
edit /boot/grub/menu.lst and place the nmi_watchdog=0 at the end of the
currently booting kernel line.
2. reboot the sever
+ 3. Once the system comes up perform a rmmod hpwdt
+ 4. insmod /lib/modules/`uname -r`/kernel/drivers/char/watchdog/hpwdt.ko priority=1
Now, the hpwdt can successfully receive and source the NMI and provide a log
message that details the reason for the NMI (as determined by the HP BIOS).
diff --git a/MAINTAINERS b/MAINTAINERS
index 02f6f78..fa2a16d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -230,6 +230,13 @@
S: Maintained
F: drivers/net/acenic*
+ACER ASPIRE ONE TEMPERATURE AND FAN DRIVER
+P: Peter Feuerer
+M: peter@piie.net
+W: http://piie.net/?section=acerhdf
+S: Maintained
+F: drivers/platform/x86/acerhdf.c
+
ACER WMI LAPTOP EXTRAS
P: Carlos Corbacho
M: carlos@strangeworlds.co.uk
@@ -913,8 +920,7 @@
P: Karol Kozimor
M: sziwan@users.sourceforge.net
L: acpi4asus-user@lists.sourceforge.net
-W: http://sourceforge.net/projects/acpi4asus
-W: http://xf.iksaif.net/acpi4asus
+W: http://acpi4asus.sf.net
S: Maintained
F: arch/x86/kernel/acpi/boot.c
F: drivers/platform/x86/asus_acpi.c
@@ -930,8 +936,7 @@
P: Corentin Chary
M: corentincj@iksaif.net
L: acpi4asus-user@lists.sourceforge.net
-W: http://sourceforge.net/projects/acpi4asus
-W: http://xf.iksaif.net/acpi4asus
+W: http://acpi4asus.sf.net
S: Maintained
F: drivers/platform/x86/asus-laptop.c
@@ -1636,7 +1641,7 @@
M: starvik@axis.com
P: Jesper Nilsson
M: jesper.nilsson@axis.com
-L: dev-etrax@axis.com
+L: linux-cris-kernel@axis.com
W: http://developer.axis.com
S: Maintained
F: arch/cris/
@@ -2110,7 +2115,7 @@
P: Corentin Chary
M: corentincj@iksaif.net
L: acpi4asus-user@lists.sourceforge.net
-W: http://sourceforge.net/projects/acpi4asus
+W: http://acpi4asus.sf.net
S: Maintained
F: drivers/platform/x86/eeepc-laptop.c
@@ -2482,6 +2487,14 @@
F: drivers/net/wan/pci200syn.c
F: drivers/net/wan/wanxl*
+GENERIC INCLUDE/ASM HEADER FILES
+P: Arnd Bergmann
+M: arnd@arndb.de
+L: linux-arch@vger.kernel.org
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic.git
+S: Maintained
+F: include/asm-generic
+
GFS2 FILE SYSTEM
P: Steven Whitehouse
M: swhiteho@redhat.com
@@ -2824,10 +2837,10 @@
F: drivers/scsi/ips.*
IDE SUBSYSTEM
-P: Bartlomiej Zolnierkiewicz
-M: bzolnier@gmail.com
+P: David S. Miller
+M: davem@davemloft.net
L: linux-ide@vger.kernel.org
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6.git
S: Maintained
F: Documentation/ide/
F: drivers/ide/
diff --git a/Makefile b/Makefile
index 46e1c9d..d1216fe 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
-SUBLEVEL = 30
-EXTRAVERSION =
+SUBLEVEL = 31
+EXTRAVERSION = -rc1
NAME = Man-Eating Seals of Antiquity
# *DOCUMENTATION*
diff --git a/arch/cris/arch-v10/kernel/dma.c b/arch/cris/arch-v10/kernel/dma.c
index 929e686..d31504b 100644
--- a/arch/cris/arch-v10/kernel/dma.c
+++ b/arch/cris/arch-v10/kernel/dma.c
@@ -24,7 +24,7 @@
unsigned long int gens;
int fail = -EINVAL;
- if ((dmanr < 0) || (dmanr >= MAX_DMA_CHANNELS)) {
+ if (dmanr >= MAX_DMA_CHANNELS) {
printk(KERN_CRIT "cris_request_dma: invalid DMA channel %u\n", dmanr);
return -EINVAL;
}
@@ -213,7 +213,7 @@
void cris_free_dma(unsigned int dmanr, const char * device_id)
{
unsigned long flags;
- if ((dmanr < 0) || (dmanr >= MAX_DMA_CHANNELS)) {
+ if (dmanr >= MAX_DMA_CHANNELS) {
printk(KERN_CRIT "cris_free_dma: invalid DMA channel %u\n", dmanr);
return;
}
diff --git a/arch/cris/arch-v32/drivers/cryptocop.c b/arch/cris/arch-v32/drivers/cryptocop.c
index 67c61ea..fd529a0 100644
--- a/arch/cris/arch-v32/drivers/cryptocop.c
+++ b/arch/cris/arch-v32/drivers/cryptocop.c
@@ -1395,7 +1395,7 @@
if (padlen < MD5_MIN_PAD_LENGTH) padlen += MD5_BLOCK_LENGTH;
p = kmalloc(padlen, alloc_flag);
- if (!pad) return -ENOMEM;
+ if (!p) return -ENOMEM;
*p = 0x80;
memset(p+1, 0, padlen - 1);
@@ -1427,7 +1427,7 @@
if (padlen < SHA1_MIN_PAD_LENGTH) padlen += SHA1_BLOCK_LENGTH;
p = kmalloc(padlen, alloc_flag);
- if (!pad) return -ENOMEM;
+ if (!p) return -ENOMEM;
*p = 0x80;
memset(p+1, 0, padlen - 1);
diff --git a/arch/cris/arch-v32/kernel/irq.c b/arch/cris/arch-v32/kernel/irq.c
index d70b445..57668db 100644
--- a/arch/cris/arch-v32/kernel/irq.c
+++ b/arch/cris/arch-v32/kernel/irq.c
@@ -430,8 +430,8 @@
masked[i] &= ~TIMER_MASK;
do_IRQ(TIMER0_INTR_VECT, regs);
}
- }
#endif
+ }
#ifdef IGNORE_MASK
/* Remove IRQs that can't be handled as multiple. */
diff --git a/arch/cris/arch-v32/lib/Makefile b/arch/cris/arch-v32/lib/Makefile
index eb4aad1..dd296b9 100644
--- a/arch/cris/arch-v32/lib/Makefile
+++ b/arch/cris/arch-v32/lib/Makefile
@@ -3,5 +3,5 @@
#
lib-y = checksum.o checksumcopy.o string.o usercopy.o memset.o \
- csumcpfruser.o spinlock.o delay.o
+ csumcpfruser.o spinlock.o delay.o strcmp.o
diff --git a/arch/cris/arch-v32/lib/strcmp.S b/arch/cris/arch-v32/lib/strcmp.S
new file mode 100644
index 0000000..8f7a1ee
--- /dev/null
+++ b/arch/cris/arch-v32/lib/strcmp.S
@@ -0,0 +1,21 @@
+; strcmp.S -- CRISv32 version.
+; Copyright (C) 2008 AXIS Communications AB
+; Written by Edgar E. Iglesias
+;
+; This source code is licensed under the GNU General Public License,
+; Version 2. See the file COPYING for more details.
+
+ .global strcmp
+ .type strcmp,@function
+strcmp:
+1:
+ move.b [$r10+], $r12
+ seq $r13
+ sub.b [$r11+], $r12
+ or.b $r12, $r13
+ beq 1b
+ nop
+
+ ret
+ movs.b $r12, $r10
+ .size strcmp, . - strcmp
diff --git a/arch/cris/include/arch-v32/arch/spinlock.h b/arch/cris/include/arch-v32/arch/spinlock.h
index 129756b..367a53e 100644
--- a/arch/cris/include/arch-v32/arch/spinlock.h
+++ b/arch/cris/include/arch-v32/arch/spinlock.h
@@ -78,7 +78,7 @@
{
__raw_spin_lock(&rw->slock);
while (rw->lock != RW_LOCK_BIAS);
- rw->lock == 0;
+ rw->lock = 0;
__raw_spin_unlock(&rw->slock);
}
@@ -93,7 +93,7 @@
{
__raw_spin_lock(&rw->slock);
while (rw->lock != RW_LOCK_BIAS);
- rw->lock == RW_LOCK_BIAS;
+ rw->lock = RW_LOCK_BIAS;
__raw_spin_unlock(&rw->slock);
}
@@ -114,7 +114,7 @@
int ret = 0;
__raw_spin_lock(&rw->slock);
if (rw->lock == RW_LOCK_BIAS) {
- rw->lock == 0;
+ rw->lock = 0;
ret = 1;
}
__raw_spin_unlock(&rw->slock);
diff --git a/arch/cris/include/asm/string.h b/arch/cris/include/asm/string.h
index 691190e..d5db39f 100644
--- a/arch/cris/include/asm/string.h
+++ b/arch/cris/include/asm/string.h
@@ -11,4 +11,10 @@
#define __HAVE_ARCH_MEMSET
extern void *memset(void *, int, size_t);
+#ifdef CONFIG_ETRAX_ARCH_V32
+/* For v32 we provide strcmp. */
+#define __HAVE_ARCH_STRCMP
+extern int strcmp(const char *s1, const char *s2);
+#endif
+
#endif
diff --git a/arch/h8300/Kconfig.cpu b/arch/h8300/Kconfig.cpu
index b65dcfe..6e2ecff 100644
--- a/arch/h8300/Kconfig.cpu
+++ b/arch/h8300/Kconfig.cpu
@@ -13,7 +13,7 @@
config H8300H_AKI3068NET
bool "AE-3068/69"
- select CONFIG_H83068
+ select H83068
help
AKI-H8/3068F / AKI-H8/3069F Flashmicom LAN Board Support
More Information. (Japanese Only)
@@ -24,7 +24,7 @@
config H8300H_H8MAX
bool "H8MAX"
- select CONFIG_H83068
+ select H83068
help
H8MAX Evaluation Board Support
More Information. (Japanese Only)
@@ -32,7 +32,7 @@
config H8300H_SIM
bool "H8/300H Simulator"
- select CONFIG_H83007
+ select H83007
help
GDB Simulator Support
More Information.
@@ -45,7 +45,7 @@
config H8S_EDOSK2674
bool "EDOSK-2674"
- select CONFIG_H8S2768
+ select H8S2678
help
Renesas EDOSK-2674 Evaluation Board Support
More Information.
diff --git a/arch/ia64/kernel/acpi-processor.c b/arch/ia64/kernel/acpi-processor.c
index cbe6cee..dbda7bd 100644
--- a/arch/ia64/kernel/acpi-processor.c
+++ b/arch/ia64/kernel/acpi-processor.c
@@ -71,3 +71,15 @@
}
EXPORT_SYMBOL(arch_acpi_processor_init_pdc);
+
+void arch_acpi_processor_cleanup_pdc(struct acpi_processor *pr)
+{
+ if (pr->pdc) {
+ kfree(pr->pdc->pointer->buffer.pointer);
+ kfree(pr->pdc->pointer);
+ kfree(pr->pdc);
+ pr->pdc = NULL;
+ }
+}
+
+EXPORT_SYMBOL(arch_acpi_processor_cleanup_pdc);
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index b29f028..8c4be1f 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -601,6 +601,7 @@
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_HIGHMEM
+ select SYS_SUPPORTS_HOTPLUG_CPU
select SYS_HAS_CPU_CAVIUM_OCTEON
help
The Octeon simulator is software performance model of the Cavium
@@ -615,6 +616,7 @@
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_HIGHMEM
+ select SYS_SUPPORTS_HOTPLUG_CPU
select SYS_HAS_EARLY_PRINTK
select SYS_HAS_CPU_CAVIUM_OCTEON
select SWAP_IO_SPACE
@@ -784,8 +786,17 @@
bool
config HOTPLUG_CPU
+ bool "Support for hot-pluggable CPUs"
+ depends on SMP && HOTPLUG && SYS_SUPPORTS_HOTPLUG_CPU
+ help
+ Say Y here to allow turning CPUs off and on. CPUs can be
+ controlled through /sys/devices/system/cpu.
+ (Note: power management support will enable this option
+ automatically on SMP systems. )
+ Say N if you want to disable CPU hotplug.
+
+config SYS_SUPPORTS_HOTPLUG_CPU
bool
- default n
config I8259
bool
@@ -2136,11 +2147,11 @@
config ARCH_HIBERNATION_POSSIBLE
def_bool y
- depends on !SMP
+ depends on SYS_SUPPORTS_HOTPLUG_CPU
config ARCH_SUSPEND_POSSIBLE
def_bool y
- depends on !SMP
+ depends on SYS_SUPPORTS_HOTPLUG_CPU
source "kernel/power/Kconfig"
diff --git a/arch/mips/cavium-octeon/octeon-irq.c b/arch/mips/cavium-octeon/octeon-irq.c
index 8dfa009..384f184 100644
--- a/arch/mips/cavium-octeon/octeon-irq.c
+++ b/arch/mips/cavium-octeon/octeon-irq.c
@@ -7,7 +7,7 @@
*/
#include <linux/irq.h>
#include <linux/interrupt.h>
-#include <linux/hardirq.h>
+#include <linux/smp.h>
#include <asm/octeon/octeon.h>
#include <asm/octeon/cvmx-pexp-defs.h>
@@ -501,3 +501,62 @@
}
}
}
+
+#ifdef CONFIG_HOTPLUG_CPU
+static int is_irq_enabled_on_cpu(unsigned int irq, unsigned int cpu)
+{
+ unsigned int isset;
+#ifdef CONFIG_SMP
+ int coreid = cpu_logical_map(cpu);
+#else
+ int coreid = cvmx_get_core_num();
+#endif
+ int bit = (irq < OCTEON_IRQ_WDOG0) ?
+ irq - OCTEON_IRQ_WORKQ0 : irq - OCTEON_IRQ_WDOG0;
+ if (irq < 64) {
+ isset = (cvmx_read_csr(CVMX_CIU_INTX_EN0(coreid * 2)) &
+ (1ull << bit)) >> bit;
+ } else {
+ isset = (cvmx_read_csr(CVMX_CIU_INTX_EN1(coreid * 2 + 1)) &
+ (1ull << bit)) >> bit;
+ }
+ return isset;
+}
+
+void fixup_irqs(void)
+{
+ int irq;
+
+ for (irq = OCTEON_IRQ_SW0; irq <= OCTEON_IRQ_TIMER; irq++)
+ octeon_irq_core_disable_local(irq);
+
+ for (irq = OCTEON_IRQ_WORKQ0; irq <= OCTEON_IRQ_GPIO15; irq++) {
+ if (is_irq_enabled_on_cpu(irq, smp_processor_id())) {
+ /* ciu irq migrates to next cpu */
+ octeon_irq_chip_ciu0.disable(irq);
+ octeon_irq_ciu0_set_affinity(irq, &cpu_online_map);
+ }
+ }
+
+#if 0
+ for (irq = OCTEON_IRQ_MBOX0; irq <= OCTEON_IRQ_MBOX1; irq++)
+ octeon_irq_mailbox_mask(irq);
+#endif
+ for (irq = OCTEON_IRQ_UART0; irq <= OCTEON_IRQ_BOOTDMA; irq++) {
+ if (is_irq_enabled_on_cpu(irq, smp_processor_id())) {
+ /* ciu irq migrates to next cpu */
+ octeon_irq_chip_ciu0.disable(irq);
+ octeon_irq_ciu0_set_affinity(irq, &cpu_online_map);
+ }
+ }
+
+ for (irq = OCTEON_IRQ_UART2; irq <= OCTEON_IRQ_RESERVED135; irq++) {
+ if (is_irq_enabled_on_cpu(irq, smp_processor_id())) {
+ /* ciu irq migrates to next cpu */
+ octeon_irq_chip_ciu1.disable(irq);
+ octeon_irq_ciu1_set_affinity(irq, &cpu_online_map);
+ }
+ }
+}
+
+#endif /* CONFIG_HOTPLUG_CPU */
diff --git a/arch/mips/cavium-octeon/octeon_boot.h b/arch/mips/cavium-octeon/octeon_boot.h
new file mode 100644
index 0000000..0f7f84a
--- /dev/null
+++ b/arch/mips/cavium-octeon/octeon_boot.h
@@ -0,0 +1,70 @@
+/*
+ * (C) Copyright 2004, 2005 Cavium Networks
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __OCTEON_BOOT_H__
+#define __OCTEON_BOOT_H__
+
+#include <linux/types.h>
+
+struct boot_init_vector {
+ uint32_t stack_addr;
+ uint32_t code_addr;
+ uint32_t app_start_func_addr;
+ uint32_t k0_val;
+ uint32_t flags;
+ uint32_t boot_info_addr;
+ uint32_t pad;
+ uint32_t pad2;
+};
+
+/* similar to bootloader's linux_app_boot_info but without global data */
+struct linux_app_boot_info {
+ uint32_t labi_signature;
+ uint32_t start_core0_addr;
+ uint32_t avail_coremask;
+ uint32_t pci_console_active;
+ uint32_t icache_prefetch_disable;
+ uint32_t InitTLBStart_addr;
+ uint32_t start_app_addr;
+ uint32_t cur_exception_base;
+ uint32_t no_mark_private_data;
+ uint32_t compact_flash_common_base_addr;
+ uint32_t compact_flash_attribute_base_addr;
+ uint32_t led_display_base_addr;
+};
+
+/* If not to copy a lot of bootloader's structures
+ here is only offset of requested member */
+#define AVAIL_COREMASK_OFFSET_IN_LINUX_APP_BOOT_BLOCK 0x765c
+
+/* hardcoded in bootloader */
+#define LABI_ADDR_IN_BOOTLOADER 0x700
+
+#define LINUX_APP_BOOT_BLOCK_NAME "linux-app-boot"
+
+#define LABI_SIGNATURE 0xAABBCCDD
+
+/* from uboot-headers/octeon_mem_map.h */
+#define EXCEPTION_BASE_INCR (4 * 1024)
+ /* Increment size for exception base addresses (4k minimum) */
+#define EXCEPTION_BASE_BASE 0
+#define BOOTLOADER_PRIV_DATA_BASE (EXCEPTION_BASE_BASE + 0x800)
+#define BOOTLOADER_BOOT_VECTOR (BOOTLOADER_PRIV_DATA_BASE)
+
+#endif /* __OCTEON_BOOT_H__ */
diff --git a/arch/mips/cavium-octeon/setup.c b/arch/mips/cavium-octeon/setup.c
index 5f4e49b..da55924 100644
--- a/arch/mips/cavium-octeon/setup.c
+++ b/arch/mips/cavium-octeon/setup.c
@@ -13,6 +13,7 @@
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/serial.h>
+#include <linux/smp.h>
#include <linux/types.h>
#include <linux/string.h> /* for memset */
#include <linux/tty.h>
diff --git a/arch/mips/cavium-octeon/smp.c b/arch/mips/cavium-octeon/smp.c
index 24e0ad6..0b891a9 100644
--- a/arch/mips/cavium-octeon/smp.c
+++ b/arch/mips/cavium-octeon/smp.c
@@ -5,6 +5,7 @@
*
* Copyright (C) 2004-2008 Cavium Networks
*/
+#include <linux/cpu.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/smp.h>
@@ -19,10 +20,16 @@
#include <asm/octeon/octeon.h>
+#include "octeon_boot.h"
+
volatile unsigned long octeon_processor_boot = 0xff;
volatile unsigned long octeon_processor_sp;
volatile unsigned long octeon_processor_gp;
+#ifdef CONFIG_HOTPLUG_CPU
+static unsigned int InitTLBStart_addr;
+#endif
+
static irqreturn_t mailbox_interrupt(int irq, void *dev_id)
{
const int coreid = cvmx_get_core_num();
@@ -67,8 +74,28 @@
}
/**
- * Detect available CPUs, populate phys_cpu_present_map
+ * Detect available CPUs, populate cpu_possible_map
*/
+static void octeon_smp_hotplug_setup(void)
+{
+#ifdef CONFIG_HOTPLUG_CPU
+ uint32_t labi_signature;
+
+ labi_signature =
+ cvmx_read64_uint32(CVMX_ADD_SEG(CVMX_MIPS_SPACE_XKPHYS,
+ LABI_ADDR_IN_BOOTLOADER +
+ offsetof(struct linux_app_boot_info,
+ labi_signature)));
+ if (labi_signature != LABI_SIGNATURE)
+ pr_err("The bootloader version on this board is incorrect\n");
+ InitTLBStart_addr =
+ cvmx_read64_uint32(CVMX_ADD_SEG(CVMX_MIPS_SPACE_XKPHYS,
+ LABI_ADDR_IN_BOOTLOADER +
+ offsetof(struct linux_app_boot_info,
+ InitTLBStart_addr)));
+#endif
+}
+
static void octeon_smp_setup(void)
{
const int coreid = cvmx_get_core_num();
@@ -91,6 +118,9 @@
cpus++;
}
}
+ cpu_present_map = cpu_possible_map;
+
+ octeon_smp_hotplug_setup();
}
/**
@@ -128,6 +158,17 @@
const int coreid = cvmx_get_core_num();
union cvmx_ciu_intx_sum0 interrupt_enable;
+#ifdef CONFIG_HOTPLUG_CPU
+ unsigned int cur_exception_base;
+
+ cur_exception_base = cvmx_read64_uint32(
+ CVMX_ADD_SEG(CVMX_MIPS_SPACE_XKPHYS,
+ LABI_ADDR_IN_BOOTLOADER +
+ offsetof(struct linux_app_boot_info,
+ cur_exception_base)));
+ /* cur_exception_base is incremented in bootloader after setting */
+ write_c0_ebase((unsigned int)(cur_exception_base - EXCEPTION_BASE_INCR));
+#endif
octeon_check_cpu_bist();
octeon_init_cvmcount();
/*
@@ -199,6 +240,193 @@
#endif
}
+#ifdef CONFIG_HOTPLUG_CPU
+
+/* State of each CPU. */
+DEFINE_PER_CPU(int, cpu_state);
+
+extern void fixup_irqs(void);
+
+static DEFINE_SPINLOCK(smp_reserve_lock);
+
+static int octeon_cpu_disable(void)
+{
+ unsigned int cpu = smp_processor_id();
+
+ if (cpu == 0)
+ return -EBUSY;
+
+ spin_lock(&smp_reserve_lock);
+
+ cpu_clear(cpu, cpu_online_map);
+ cpu_clear(cpu, cpu_callin_map);
+ local_irq_disable();
+ fixup_irqs();
+ local_irq_enable();
+
+ flush_cache_all();
+ local_flush_tlb_all();
+
+ spin_unlock(&smp_reserve_lock);
+
+ return 0;
+}
+
+static void octeon_cpu_die(unsigned int cpu)
+{
+ int coreid = cpu_logical_map(cpu);
+ uint32_t avail_coremask;
+ struct cvmx_bootmem_named_block_desc *block_desc;
+
+#ifdef CONFIG_CAVIUM_OCTEON_WATCHDOG
+ /* Disable the watchdog */
+ cvmx_ciu_wdogx_t ciu_wdog;
+ ciu_wdog.u64 = cvmx_read_csr(CVMX_CIU_WDOGX(cpu));
+ ciu_wdog.s.mode = 0;
+ cvmx_write_csr(CVMX_CIU_WDOGX(cpu), ciu_wdog.u64);
+#endif
+
+ while (per_cpu(cpu_state, cpu) != CPU_DEAD)
+ cpu_relax();
+
+ /*
+ * This is a bit complicated strategics of getting/settig available
+ * cores mask, copied from bootloader
+ */
+ /* LINUX_APP_BOOT_BLOCK is initialized in bootoct binary */
+ block_desc = cvmx_bootmem_find_named_block(LINUX_APP_BOOT_BLOCK_NAME);
+
+ if (!block_desc) {
+ avail_coremask =
+ cvmx_read64_uint32(CVMX_ADD_SEG(CVMX_MIPS_SPACE_XKPHYS,
+ LABI_ADDR_IN_BOOTLOADER +
+ offsetof
+ (struct linux_app_boot_info,
+ avail_coremask)));
+ } else { /* alternative, already initialized */
+ avail_coremask =
+ cvmx_read64_uint32(CVMX_ADD_SEG(CVMX_MIPS_SPACE_XKPHYS,
+ block_desc->base_addr +
+ AVAIL_COREMASK_OFFSET_IN_LINUX_APP_BOOT_BLOCK));
+ }
+
+ avail_coremask |= 1 << coreid;
+
+ /* Setting avail_coremask for bootoct binary */
+ if (!block_desc) {
+ cvmx_write64_uint32(CVMX_ADD_SEG(CVMX_MIPS_SPACE_XKPHYS,
+ LABI_ADDR_IN_BOOTLOADER +
+ offsetof(struct linux_app_boot_info,
+ avail_coremask)),
+ avail_coremask);
+ } else {
+ cvmx_write64_uint32(CVMX_ADD_SEG(CVMX_MIPS_SPACE_XKPHYS,
+ block_desc->base_addr +
+ AVAIL_COREMASK_OFFSET_IN_LINUX_APP_BOOT_BLOCK),
+ avail_coremask);
+ }
+
+ pr_info("Reset core %d. Available Coremask = %x \n", coreid,
+ avail_coremask);
+ cvmx_write_csr(CVMX_CIU_PP_RST, 1 << coreid);
+ cvmx_write_csr(CVMX_CIU_PP_RST, 0);
+}
+
+void play_dead(void)
+{
+ int coreid = cvmx_get_core_num();
+
+ idle_task_exit();
+ octeon_processor_boot = 0xff;
+ per_cpu(cpu_state, coreid) = CPU_DEAD;
+
+ while (1) /* core will be reset here */
+ ;
+}
+
+extern void kernel_entry(unsigned long arg1, ...);
+
+static void start_after_reset(void)
+{
+ kernel_entry(0, 0, 0); /* set a2 = 0 for secondary core */
+}
+
+int octeon_update_boot_vector(unsigned int cpu)
+{
+
+ int coreid = cpu_logical_map(cpu);
+ unsigned int avail_coremask;
+ struct cvmx_bootmem_named_block_desc *block_desc;
+ struct boot_init_vector *boot_vect =
+ (struct boot_init_vector *) cvmx_phys_to_ptr(0x0 +
+ BOOTLOADER_BOOT_VECTOR);
+
+ block_desc = cvmx_bootmem_find_named_block(LINUX_APP_BOOT_BLOCK_NAME);
+
+ if (!block_desc) {
+ avail_coremask =
+ cvmx_read64_uint32(CVMX_ADD_SEG(CVMX_MIPS_SPACE_XKPHYS,
+ LABI_ADDR_IN_BOOTLOADER +
+ offsetof(struct linux_app_boot_info,
+ avail_coremask)));
+ } else { /* alternative, already initialized */
+ avail_coremask =
+ cvmx_read64_uint32(CVMX_ADD_SEG(CVMX_MIPS_SPACE_XKPHYS,
+ block_desc->base_addr +
+ AVAIL_COREMASK_OFFSET_IN_LINUX_APP_BOOT_BLOCK));
+ }
+
+ if (!(avail_coremask & (1 << coreid))) {
+ /* core not available, assume, that catched by simple-executive */
+ cvmx_write_csr(CVMX_CIU_PP_RST, 1 << coreid);
+ cvmx_write_csr(CVMX_CIU_PP_RST, 0);
+ }
+
+ boot_vect[coreid].app_start_func_addr =
+ (uint32_t) (unsigned long) start_after_reset;
+ boot_vect[coreid].code_addr = InitTLBStart_addr;
+
+ CVMX_SYNC;
+
+ cvmx_write_csr(CVMX_CIU_NMI, (1 << coreid) & avail_coremask);
+
+ return 0;
+}
+
+static int __cpuinit octeon_cpu_callback(struct notifier_block *nfb,
+ unsigned long action, void *hcpu)
+{
+ unsigned int cpu = (unsigned long)hcpu;
+
+ switch (action) {
+ case CPU_UP_PREPARE:
+ octeon_update_boot_vector(cpu);
+ break;
+ case CPU_ONLINE:
+ pr_info("Cpu %d online\n", cpu);
+ break;
+ case CPU_DEAD:
+ break;
+ }
+
+ return NOTIFY_OK;
+}
+
+static struct notifier_block __cpuinitdata octeon_cpu_notifier = {
+ .notifier_call = octeon_cpu_callback,
+};
+
+static int __cpuinit register_cavium_notifier(void)
+{
+ register_hotcpu_notifier(&octeon_cpu_notifier);
+
+ return 0;
+}
+
+late_initcall(register_cavium_notifier);
+
+#endif /* CONFIG_HOTPLUG_CPU */
+
struct plat_smp_ops octeon_smp_ops = {
.send_ipi_single = octeon_send_ipi_single,
.send_ipi_mask = octeon_send_ipi_mask,
@@ -208,4 +436,8 @@
.boot_secondary = octeon_boot_secondary,
.smp_setup = octeon_smp_setup,
.prepare_cpus = octeon_prepare_cpus,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_disable = octeon_cpu_disable,
+ .cpu_die = octeon_cpu_die,
+#endif
};
diff --git a/arch/mips/include/asm/bug.h b/arch/mips/include/asm/bug.h
index 08ea468..6cf29c2 100644
--- a/arch/mips/include/asm/bug.h
+++ b/arch/mips/include/asm/bug.h
@@ -1,6 +1,7 @@
#ifndef __ASM_BUG_H
#define __ASM_BUG_H
+#include <linux/compiler.h>
#include <asm/sgidefs.h>
#ifdef CONFIG_BUG
diff --git a/arch/mips/include/asm/bugs.h b/arch/mips/include/asm/bugs.h
index 9dc10df..b160a70 100644
--- a/arch/mips/include/asm/bugs.h
+++ b/arch/mips/include/asm/bugs.h
@@ -11,6 +11,7 @@
#include <linux/bug.h>
#include <linux/delay.h>
+#include <linux/smp.h>
#include <asm/cpu.h>
#include <asm/cpu-info.h>
diff --git a/arch/mips/include/asm/irq.h b/arch/mips/include/asm/irq.h
index 4f1eed1..09b08d0 100644
--- a/arch/mips/include/asm/irq.h
+++ b/arch/mips/include/asm/irq.h
@@ -10,6 +10,7 @@
#define _ASM_IRQ_H
#include <linux/linkage.h>
+#include <linux/smp.h>
#include <asm/mipsmtregs.h>
diff --git a/arch/mips/include/asm/mmu_context.h b/arch/mips/include/asm/mmu_context.h
index d7f3eb0..d3bea88 100644
--- a/arch/mips/include/asm/mmu_context.h
+++ b/arch/mips/include/asm/mmu_context.h
@@ -13,6 +13,7 @@
#include <linux/errno.h>
#include <linux/sched.h>
+#include <linux/smp.h>
#include <linux/slab.h>
#include <asm/cacheflush.h>
#include <asm/tlbflush.h>
diff --git a/arch/mips/include/asm/smp-ops.h b/arch/mips/include/asm/smp-ops.h
index 64ffc02..fd54554 100644
--- a/arch/mips/include/asm/smp-ops.h
+++ b/arch/mips/include/asm/smp-ops.h
@@ -26,6 +26,10 @@
void (*boot_secondary)(int cpu, struct task_struct *idle);
void (*smp_setup)(void);
void (*prepare_cpus)(unsigned int max_cpus);
+#ifdef CONFIG_HOTPLUG_CPU
+ int (*cpu_disable)(void);
+ void (*cpu_die)(unsigned int cpu);
+#endif
};
extern void register_smp_ops(struct plat_smp_ops *ops);
diff --git a/arch/mips/include/asm/smp.h b/arch/mips/include/asm/smp.h
index 40e5ef1..aaa2d4a 100644
--- a/arch/mips/include/asm/smp.h
+++ b/arch/mips/include/asm/smp.h
@@ -13,6 +13,7 @@
#include <linux/bitops.h>
#include <linux/linkage.h>
+#include <linux/smp.h>
#include <linux/threads.h>
#include <linux/cpumask.h>
@@ -40,6 +41,7 @@
/* Octeon - Tell another core to flush its icache */
#define SMP_ICACHE_FLUSH 0x4
+extern volatile cpumask_t cpu_callin_map;
extern void asmlinkage smp_bootstrap(void);
@@ -55,6 +57,24 @@
mp_ops->send_ipi_single(cpu, SMP_RESCHEDULE_YOURSELF);
}
+#ifdef CONFIG_HOTPLUG_CPU
+static inline int __cpu_disable(void)
+{
+ extern struct plat_smp_ops *mp_ops; /* private */
+
+ return mp_ops->cpu_disable();
+}
+
+static inline void __cpu_die(unsigned int cpu)
+{
+ extern struct plat_smp_ops *mp_ops; /* private */
+
+ mp_ops->cpu_die(cpu);
+}
+
+extern void play_dead(void);
+#endif
+
extern asmlinkage void smp_call_function_interrupt(void);
extern void arch_send_call_function_single_ipi(int cpu);
diff --git a/arch/mips/include/asm/sn/addrs.h b/arch/mips/include/asm/sn/addrs.h
index 3a56d90..2367b56 100644
--- a/arch/mips/include/asm/sn/addrs.h
+++ b/arch/mips/include/asm/sn/addrs.h
@@ -11,6 +11,7 @@
#ifndef __ASSEMBLY__
+#include <linux/smp.h>
#include <linux/types.h>
#endif /* !__ASSEMBLY__ */
diff --git a/arch/mips/jazz/irq.c b/arch/mips/jazz/irq.c
index d9b6a5b..7fd170d 100644
--- a/arch/mips/jazz/irq.c
+++ b/arch/mips/jazz/irq.c
@@ -10,6 +10,7 @@
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
+#include <linux/smp.h>
#include <linux/spinlock.h>
#include <asm/irq_cpu.h>
diff --git a/arch/mips/kernel/cevt-bcm1480.c b/arch/mips/kernel/cevt-bcm1480.c
index a5182a2..e02f79b 100644
--- a/arch/mips/kernel/cevt-bcm1480.c
+++ b/arch/mips/kernel/cevt-bcm1480.c
@@ -18,6 +18,7 @@
#include <linux/clockchips.h>
#include <linux/interrupt.h>
#include <linux/percpu.h>
+#include <linux/smp.h>
#include <asm/addrspace.h>
#include <asm/io.h>
diff --git a/arch/mips/kernel/cevt-r4k.c b/arch/mips/kernel/cevt-r4k.c
index 0015e44..2652362 100644
--- a/arch/mips/kernel/cevt-r4k.c
+++ b/arch/mips/kernel/cevt-r4k.c
@@ -9,6 +9,7 @@
#include <linux/clockchips.h>
#include <linux/interrupt.h>
#include <linux/percpu.h>
+#include <linux/smp.h>
#include <asm/smtc_ipi.h>
#include <asm/time.h>
diff --git a/arch/mips/kernel/cevt-sb1250.c b/arch/mips/kernel/cevt-sb1250.c
index 340f53e..ac5903d 100644
--- a/arch/mips/kernel/cevt-sb1250.c
+++ b/arch/mips/kernel/cevt-sb1250.c
@@ -18,6 +18,7 @@
#include <linux/clockchips.h>
#include <linux/interrupt.h>
#include <linux/percpu.h>
+#include <linux/smp.h>
#include <asm/addrspace.h>
#include <asm/io.h>
diff --git a/arch/mips/kernel/cevt-smtc.c b/arch/mips/kernel/cevt-smtc.c
index df6f5bc..98bd7de 100644
--- a/arch/mips/kernel/cevt-smtc.c
+++ b/arch/mips/kernel/cevt-smtc.c
@@ -10,6 +10,7 @@
#include <linux/clockchips.h>
#include <linux/interrupt.h>
#include <linux/percpu.h>
+#include <linux/smp.h>
#include <asm/smtc_ipi.h>
#include <asm/time.h>
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index b13b8eb..1abe990 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -14,6 +14,7 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/ptrace.h>
+#include <linux/smp.h>
#include <linux/stddef.h>
#include <asm/bugs.h>
diff --git a/arch/mips/kernel/i8253.c b/arch/mips/kernel/i8253.c
index ed20e7f..f7d8d5d 100644
--- a/arch/mips/kernel/i8253.c
+++ b/arch/mips/kernel/i8253.c
@@ -7,6 +7,7 @@
#include <linux/interrupt.h>
#include <linux/jiffies.h>
#include <linux/module.h>
+#include <linux/smp.h>
#include <linux/spinlock.h>
#include <asm/delay.h>
diff --git a/arch/mips/kernel/irq-gic.c b/arch/mips/kernel/irq-gic.c
index 3f43c2e..39000f1 100644
--- a/arch/mips/kernel/irq-gic.c
+++ b/arch/mips/kernel/irq-gic.c
@@ -2,6 +2,7 @@
#include <linux/bitmap.h>
#include <linux/init.h>
+#include <linux/smp.h>
#include <asm/io.h>
#include <asm/gic.h>
diff --git a/arch/mips/kernel/kgdb.c b/arch/mips/kernel/kgdb.c
index 6e152c8..50c9bb8 100644
--- a/arch/mips/kernel/kgdb.c
+++ b/arch/mips/kernel/kgdb.c
@@ -26,6 +26,7 @@
#include <linux/kgdb.h>
#include <linux/kdebug.h>
#include <linux/sched.h>
+#include <linux/smp.h>
#include <asm/inst.h>
#include <asm/fpu.h>
#include <asm/cacheflush.h>
diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c
index 1eaaa45..c09d681 100644
--- a/arch/mips/kernel/process.c
+++ b/arch/mips/kernel/process.c
@@ -50,10 +50,15 @@
*/
void __noreturn cpu_idle(void)
{
+ int cpu;
+
+ /* CPU is going idle. */
+ cpu = smp_processor_id();
+
/* endless idle loop with no priority at all */
while (1) {
tick_nohz_stop_sched_tick(1);
- while (!need_resched()) {
+ while (!need_resched() && cpu_online(cpu)) {
#ifdef CONFIG_MIPS_MT_SMTC
extern void smtc_idle_loop_hook(void);
@@ -62,6 +67,12 @@
if (cpu_wait)
(*cpu_wait)();
}
+#ifdef CONFIG_HOTPLUG_CPU
+ if (!cpu_online(cpu) && !cpu_isset(cpu, cpu_callin_map) &&
+ (system_state == SYSTEM_RUNNING ||
+ system_state == SYSTEM_BOOTING))
+ play_dead();
+#endif
tick_nohz_restart_sched_tick();
preempt_enable_no_resched();
schedule();
diff --git a/arch/mips/kernel/smp-cmp.c b/arch/mips/kernel/smp-cmp.c
index f27beca..653be06 100644
--- a/arch/mips/kernel/smp-cmp.c
+++ b/arch/mips/kernel/smp-cmp.c
@@ -20,6 +20,7 @@
#include <linux/kernel.h>
#include <linux/sched.h>
+#include <linux/smp.h>
#include <linux/cpumask.h>
#include <linux/interrupt.h>
#include <linux/compiler.h>
diff --git a/arch/mips/kernel/smp-up.c b/arch/mips/kernel/smp-up.c
index 878e373..2508d55 100644
--- a/arch/mips/kernel/smp-up.c
+++ b/arch/mips/kernel/smp-up.c
@@ -55,6 +55,18 @@
{
}
+#ifdef CONFIG_HOTPLUG_CPU
+static int up_cpu_disable(void)
+{
+ return -ENOSYS;
+}
+
+static void up_cpu_die(unsigned int cpu)
+{
+ BUG();
+}
+#endif
+
struct plat_smp_ops up_smp_ops = {
.send_ipi_single = up_send_ipi_single,
.send_ipi_mask = up_send_ipi_mask,
@@ -64,4 +76,8 @@
.boot_secondary = up_boot_secondary,
.smp_setup = up_smp_setup,
.prepare_cpus = up_prepare_cpus,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_disable = up_cpu_disable,
+ .cpu_die = up_cpu_die,
+#endif
};
diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c
index c937506..bc7d9b0 100644
--- a/arch/mips/kernel/smp.c
+++ b/arch/mips/kernel/smp.c
@@ -22,6 +22,7 @@
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/interrupt.h>
+#include <linux/smp.h>
#include <linux/spinlock.h>
#include <linux/threads.h>
#include <linux/module.h>
@@ -44,7 +45,7 @@
#include <asm/mipsmtregs.h>
#endif /* CONFIG_MIPS_MT_SMTC */
-static volatile cpumask_t cpu_callin_map; /* Bitmask of started secondaries */
+volatile cpumask_t cpu_callin_map; /* Bitmask of started secondaries */
int __cpu_number_map[NR_CPUS]; /* Map physical to logical */
int __cpu_logical_map[NR_CPUS]; /* Map logical to physical */
@@ -200,6 +201,8 @@
* and keep control until "cpu_online(cpu)" is set. Note: cpu is
* physical, not logical.
*/
+static struct task_struct *cpu_idle_thread[NR_CPUS];
+
int __cpuinit __cpu_up(unsigned int cpu)
{
struct task_struct *idle;
@@ -209,9 +212,16 @@
* The following code is purely to make sure
* Linux can schedule processes on this slave.
*/
- idle = fork_idle(cpu);
- if (IS_ERR(idle))
- panic(KERN_ERR "Fork failed for CPU %d", cpu);
+ if (!cpu_idle_thread[cpu]) {
+ idle = fork_idle(cpu);
+ cpu_idle_thread[cpu] = idle;
+
+ if (IS_ERR(idle))
+ panic(KERN_ERR "Fork failed for CPU %d", cpu);
+ } else {
+ idle = cpu_idle_thread[cpu];
+ init_idle(idle, cpu);
+ }
mp_ops->boot_secondary(cpu, idle);
diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c
index 37d51cd..8a0626c 100644
--- a/arch/mips/kernel/smtc.c
+++ b/arch/mips/kernel/smtc.c
@@ -20,6 +20,7 @@
#include <linux/clockchips.h>
#include <linux/kernel.h>
#include <linux/sched.h>
+#include <linux/smp.h>
#include <linux/cpumask.h>
#include <linux/interrupt.h>
#include <linux/kernel_stat.h>
diff --git a/arch/mips/kernel/topology.c b/arch/mips/kernel/topology.c
index 660e44e..cf3eb61 100644
--- a/arch/mips/kernel/topology.c
+++ b/arch/mips/kernel/topology.c
@@ -17,7 +17,10 @@
#endif /* CONFIG_NUMA */
for_each_present_cpu(i) {
- ret = register_cpu(&per_cpu(cpu_devices, i), i);
+ struct cpu *c = &per_cpu(cpu_devices, i);
+
+ c->hotpluggable = 1;
+ ret = register_cpu(c, i);
if (ret)
printk(KERN_WARNING "topology_init: register_cpu %d "
"failed (%d)\n", i, ret);
diff --git a/arch/mips/mipssim/sim_time.c b/arch/mips/mipssim/sim_time.c
index 881ecbc..0cea932 100644
--- a/arch/mips/mipssim/sim_time.c
+++ b/arch/mips/mipssim/sim_time.c
@@ -91,6 +91,7 @@
mips_cpu_timer_irq = MSC01E_INT_BASE + MSC01E_INT_CPUCTR;
} else {
#endif
+ {
if (cpu_has_vint)
set_vi_handler(cp0_compare_irq, mips_timer_dispatch);
mips_cpu_timer_irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq;
diff --git a/arch/mips/mm/c-octeon.c b/arch/mips/mm/c-octeon.c
index 44d01a0..b165cdc 100644
--- a/arch/mips/mm/c-octeon.c
+++ b/arch/mips/mm/c-octeon.c
@@ -8,6 +8,7 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/sched.h>
+#include <linux/smp.h>
#include <linux/mm.h>
#include <linux/bitops.h>
#include <linux/cpu.h>
diff --git a/arch/mips/mm/c-r3k.c b/arch/mips/mm/c-r3k.c
index 5500c20..54e5f7b 100644
--- a/arch/mips/mm/c-r3k.c
+++ b/arch/mips/mm/c-r3k.c
@@ -12,6 +12,7 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/sched.h>
+#include <linux/smp.h>
#include <linux/mm.h>
#include <asm/page.h>
diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index 71fe4cb..6721ee2b1 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -13,6 +13,7 @@
#include <linux/kernel.h>
#include <linux/linkage.h>
#include <linux/sched.h>
+#include <linux/smp.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/bitops.h>
diff --git a/arch/mips/mm/c-tx39.c b/arch/mips/mm/c-tx39.c
index f7c8f9c..6515b44 100644
--- a/arch/mips/mm/c-tx39.c
+++ b/arch/mips/mm/c-tx39.c
@@ -11,6 +11,7 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/sched.h>
+#include <linux/smp.h>
#include <linux/mm.h>
#include <asm/cacheops.h>
diff --git a/arch/mips/mm/highmem.c b/arch/mips/mm/highmem.c
index 2b1309b..e274fda 100644
--- a/arch/mips/mm/highmem.c
+++ b/arch/mips/mm/highmem.c
@@ -1,5 +1,6 @@
#include <linux/module.h>
#include <linux/highmem.h>
+#include <linux/smp.h>
#include <asm/fixmap.h>
#include <asm/tlbflush.h>
diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c
index c551129..0e82050 100644
--- a/arch/mips/mm/init.c
+++ b/arch/mips/mm/init.c
@@ -13,6 +13,7 @@
#include <linux/module.h>
#include <linux/signal.h>
#include <linux/sched.h>
+#include <linux/smp.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/string.h>
diff --git a/arch/mips/mm/page.c b/arch/mips/mm/page.c
index 48060c6..f5c7375 100644
--- a/arch/mips/mm/page.c
+++ b/arch/mips/mm/page.c
@@ -10,6 +10,7 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/sched.h>
+#include <linux/smp.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/proc_fs.h>
diff --git a/arch/mips/mm/tlb-r3k.c b/arch/mips/mm/tlb-r3k.c
index 1c0048a6..0f5ab23 100644
--- a/arch/mips/mm/tlb-r3k.c
+++ b/arch/mips/mm/tlb-r3k.c
@@ -13,6 +13,7 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/sched.h>
+#include <linux/smp.h>
#include <linux/mm.h>
#include <asm/page.h>
diff --git a/arch/mips/mm/tlb-r4k.c b/arch/mips/mm/tlb-r4k.c
index f60fe51..cee502c 100644
--- a/arch/mips/mm/tlb-r4k.c
+++ b/arch/mips/mm/tlb-r4k.c
@@ -10,6 +10,7 @@
*/
#include <linux/init.h>
#include <linux/sched.h>
+#include <linux/smp.h>
#include <linux/mm.h>
#include <linux/hugetlb.h>
diff --git a/arch/mips/mm/tlb-r8k.c b/arch/mips/mm/tlb-r8k.c
index 4ec95cc..2b82f23 100644
--- a/arch/mips/mm/tlb-r8k.c
+++ b/arch/mips/mm/tlb-r8k.c
@@ -10,6 +10,7 @@
*/
#include <linux/init.h>
#include <linux/sched.h>
+#include <linux/smp.h>
#include <linux/mm.h>
#include <asm/cpu.h>
diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index 8f606ea..9a17bf8 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -23,6 +23,7 @@
#include <linux/bug.h>
#include <linux/kernel.h>
#include <linux/types.h>
+#include <linux/smp.h>
#include <linux/string.h>
#include <linux/init.h>
diff --git a/arch/mips/mti-malta/malta-int.c b/arch/mips/mti-malta/malta-int.c
index ea17611..b4eaf13 100644
--- a/arch/mips/mti-malta/malta-int.c
+++ b/arch/mips/mti-malta/malta-int.c
@@ -24,6 +24,7 @@
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/sched.h>
+#include <linux/smp.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/io.h>
diff --git a/arch/mips/pci/pci-ip27.c b/arch/mips/pci/pci-ip27.c
index dda6f20..a0e726e 100644
--- a/arch/mips/pci/pci-ip27.c
+++ b/arch/mips/pci/pci-ip27.c
@@ -10,6 +10,7 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/pci.h>
+#include <linux/smp.h>
#include <asm/sn/arch.h>
#include <asm/pci/bridge.h>
#include <asm/paccess.h>
diff --git a/arch/mips/pmc-sierra/yosemite/smp.c b/arch/mips/pmc-sierra/yosemite/smp.c
index f78c29b..8ace277 100644
--- a/arch/mips/pmc-sierra/yosemite/smp.c
+++ b/arch/mips/pmc-sierra/yosemite/smp.c
@@ -1,5 +1,6 @@
#include <linux/linkage.h>
#include <linux/sched.h>
+#include <linux/smp.h>
#include <asm/pmon.h>
#include <asm/titan_dep.h>
diff --git a/arch/mips/power/hibernate.S b/arch/mips/power/hibernate.S
index 486bd3f..4b8174b 100644
--- a/arch/mips/power/hibernate.S
+++ b/arch/mips/power/hibernate.S
@@ -43,15 +43,6 @@
bne t1, t3, 1b
PTR_L t0, PBE_NEXT(t0)
bnez t0, 0b
- /* flush caches to make sure context is in memory */
- PTR_L t0, __flush_cache_all
- jalr t0
- /* flush tlb entries */
-#ifdef CONFIG_SMP
- jal flush_tlb_all
-#else
- jal local_flush_tlb_all
-#endif
PTR_LA t0, saved_regs
PTR_L ra, PT_R31(t0)
PTR_L sp, PT_R29(t0)
diff --git a/arch/mips/sgi-ip27/ip27-init.c b/arch/mips/sgi-ip27/ip27-init.c
index 4a500e8..51d3a4f 100644
--- a/arch/mips/sgi-ip27/ip27-init.c
+++ b/arch/mips/sgi-ip27/ip27-init.c
@@ -9,6 +9,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/sched.h>
+#include <linux/smp.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/cpumask.h>
diff --git a/arch/mips/sgi-ip27/ip27-irq.c b/arch/mips/sgi-ip27/ip27-irq.c
index 1bb692a..c1c8e40 100644
--- a/arch/mips/sgi-ip27/ip27-irq.c
+++ b/arch/mips/sgi-ip27/ip27-irq.c
@@ -18,6 +18,7 @@
#include <linux/ioport.h>
#include <linux/timex.h>
#include <linux/slab.h>
+#include <linux/smp.h>
#include <linux/random.h>
#include <linux/kernel.h>
#include <linux/kernel_stat.h>
diff --git a/arch/mips/sgi-ip27/ip27-timer.c b/arch/mips/sgi-ip27/ip27-timer.c
index f10a7cd..6d0e59f 100644
--- a/arch/mips/sgi-ip27/ip27-timer.c
+++ b/arch/mips/sgi-ip27/ip27-timer.c
@@ -10,6 +10,7 @@
#include <linux/interrupt.h>
#include <linux/kernel_stat.h>
#include <linux/param.h>
+#include <linux/smp.h>
#include <linux/time.h>
#include <linux/timex.h>
#include <linux/mm.h>
diff --git a/arch/mips/sgi-ip27/ip27-xtalk.c b/arch/mips/sgi-ip27/ip27-xtalk.c
index 6ae64e8..5e871e7 100644
--- a/arch/mips/sgi-ip27/ip27-xtalk.c
+++ b/arch/mips/sgi-ip27/ip27-xtalk.c
@@ -9,6 +9,7 @@
#include <linux/init.h>
#include <linux/kernel.h>
+#include <linux/smp.h>
#include <asm/sn/types.h>
#include <asm/sn/klconfig.h>
#include <asm/sn/hub.h>
diff --git a/arch/mips/sibyte/bcm1480/irq.c b/arch/mips/sibyte/bcm1480/irq.c
index 690de06..ba59839 100644
--- a/arch/mips/sibyte/bcm1480/irq.c
+++ b/arch/mips/sibyte/bcm1480/irq.c
@@ -19,6 +19,7 @@
#include <linux/init.h>
#include <linux/linkage.h>
#include <linux/interrupt.h>
+#include <linux/smp.h>
#include <linux/spinlock.h>
#include <linux/mm.h>
#include <linux/slab.h>
diff --git a/arch/mips/sibyte/common/cfe_console.c b/arch/mips/sibyte/common/cfe_console.c
index 81e3d54..1ad2da1 100644
--- a/arch/mips/sibyte/common/cfe_console.c
+++ b/arch/mips/sibyte/common/cfe_console.c
@@ -51,12 +51,13 @@
setleds("u0cn");
} else if (!strcmp(consdev, "uart1")) {
setleds("u1cn");
+ } else
#endif
#ifdef CONFIG_VGA_CONSOLE
- } else if (!strcmp(consdev, "pcconsole0")) {
- setleds("pccn");
-#endif
+ if (!strcmp(consdev, "pcconsole0")) {
+ setleds("pccn");
} else
+#endif
return -ENODEV;
}
return 0;
diff --git a/arch/mips/sni/time.c b/arch/mips/sni/time.c
index 69f5f88..0d9ec1a 100644
--- a/arch/mips/sni/time.c
+++ b/arch/mips/sni/time.c
@@ -1,5 +1,6 @@
#include <linux/types.h>
#include <linux/interrupt.h>
+#include <linux/smp.h>
#include <linux/time.h>
#include <linux/clockchips.h>
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index bf6cedf..d00131c 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -62,7 +62,6 @@
config TRACE_IRQFLAGS_SUPPORT
bool
- depends on PPC64
default y
config LOCKDEP_SUPPORT
diff --git a/arch/powerpc/boot/.gitignore b/arch/powerpc/boot/.gitignore
index 2f50acd..3d80c3e 100644
--- a/arch/powerpc/boot/.gitignore
+++ b/arch/powerpc/boot/.gitignore
@@ -36,3 +36,13 @@
zconf.h
zlib.h
zutil.h
+fdt.c
+fdt.h
+fdt_ro.c
+fdt_rw.c
+fdt_strerror.c
+fdt_sw.c
+fdt_wip.c
+libfdt.h
+libfdt_internal.h
+
diff --git a/arch/powerpc/boot/dts/amigaone.dts b/arch/powerpc/boot/dts/amigaone.dts
index 26549fc..49ac36b 100644
--- a/arch/powerpc/boot/dts/amigaone.dts
+++ b/arch/powerpc/boot/dts/amigaone.dts
@@ -70,8 +70,8 @@
devsel-speed = <0x00000001>;
min-grant = <0>;
max-latency = <0>;
- /* First 64k for I/O at 0x0 on PCI mapped to 0x0 on ISA. */
- ranges = <0x00000001 0 0x01000000 0 0x00000000 0x00010000>;
+ /* First 4k for I/O at 0x0 on PCI mapped to 0x0 on ISA. */
+ ranges = <0x00000001 0 0x01000000 0 0x00000000 0x00001000>;
interrupt-parent = <&i8259>;
#interrupt-cells = <2>;
#address-cells = <2>;
diff --git a/arch/powerpc/boot/dts/mpc8569mds.dts b/arch/powerpc/boot/dts/mpc8569mds.dts
index a8dcb01..a680165 100644
--- a/arch/powerpc/boot/dts/mpc8569mds.dts
+++ b/arch/powerpc/boot/dts/mpc8569mds.dts
@@ -253,6 +253,7 @@
/* Filled in by U-Boot */
clock-frequency = <0>;
status = "disabled";
+ sdhci,1-bit-only;
};
crypto@30000 {
diff --git a/arch/powerpc/include/asm/cpm1.h b/arch/powerpc/include/asm/cpm1.h
index 2ff79874..7685ffd 100644
--- a/arch/powerpc/include/asm/cpm1.h
+++ b/arch/powerpc/include/asm/cpm1.h
@@ -598,8 +598,6 @@
#define CICR_IEN ((uint)0x00000080) /* Int. enable */
#define CICR_SPS ((uint)0x00000001) /* SCC Spread */
-#define IMAP_ADDR (get_immrbase())
-
#define CPM_PIN_INPUT 0
#define CPM_PIN_OUTPUT 1
#define CPM_PIN_PRIMARY 0
diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h
index 3d9e887..b44aaab 100644
--- a/arch/powerpc/include/asm/dma-mapping.h
+++ b/arch/powerpc/include/asm/dma-mapping.h
@@ -309,7 +309,9 @@
struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
BUG_ON(!dma_ops);
- dma_ops->sync_single_range_for_cpu(dev, dma_handle, 0,
+
+ if (dma_ops->sync_single_range_for_cpu)
+ dma_ops->sync_single_range_for_cpu(dev, dma_handle, 0,
size, direction);
}
@@ -320,7 +322,9 @@
struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
BUG_ON(!dma_ops);
- dma_ops->sync_single_range_for_device(dev, dma_handle,
+
+ if (dma_ops->sync_single_range_for_device)
+ dma_ops->sync_single_range_for_device(dev, dma_handle,
0, size, direction);
}
@@ -331,7 +335,9 @@
struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
BUG_ON(!dma_ops);
- dma_ops->sync_sg_for_cpu(dev, sgl, nents, direction);
+
+ if (dma_ops->sync_sg_for_cpu)
+ dma_ops->sync_sg_for_cpu(dev, sgl, nents, direction);
}
static inline void dma_sync_sg_for_device(struct device *dev,
@@ -341,7 +347,9 @@
struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
BUG_ON(!dma_ops);
- dma_ops->sync_sg_for_device(dev, sgl, nents, direction);
+
+ if (dma_ops->sync_sg_for_device)
+ dma_ops->sync_sg_for_device(dev, sgl, nents, direction);
}
static inline void dma_sync_single_range_for_cpu(struct device *dev,
@@ -351,7 +359,9 @@
struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
BUG_ON(!dma_ops);
- dma_ops->sync_single_range_for_cpu(dev, dma_handle,
+
+ if (dma_ops->sync_single_range_for_cpu)
+ dma_ops->sync_single_range_for_cpu(dev, dma_handle,
offset, size, direction);
}
@@ -362,7 +372,9 @@
struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
BUG_ON(!dma_ops);
- dma_ops->sync_single_range_for_device(dev, dma_handle, offset,
+
+ if (dma_ops->sync_single_range_for_device)
+ dma_ops->sync_single_range_for_device(dev, dma_handle, offset,
size, direction);
}
#else /* CONFIG_PPC_NEED_DMA_SYNC_OPS */
diff --git a/arch/powerpc/include/asm/highmem.h b/arch/powerpc/include/asm/highmem.h
index 684a73f..a74c4ee 100644
--- a/arch/powerpc/include/asm/highmem.h
+++ b/arch/powerpc/include/asm/highmem.h
@@ -22,9 +22,7 @@
#ifdef __KERNEL__
-#include <linux/init.h>
#include <linux/interrupt.h>
-#include <linux/highmem.h>
#include <asm/kmap_types.h>
#include <asm/tlbflush.h>
#include <asm/page.h>
@@ -62,6 +60,9 @@
extern void *kmap_high(struct page *page);
extern void kunmap_high(struct page *page);
+extern void *kmap_atomic_prot(struct page *page, enum km_type type,
+ pgprot_t prot);
+extern void kunmap_atomic(void *kvaddr, enum km_type type);
static inline void *kmap(struct page *page)
{
@@ -79,62 +80,11 @@
kunmap_high(page);
}
-/*
- * The use of kmap_atomic/kunmap_atomic is discouraged - kmap/kunmap
- * gives a more generic (and caching) interface. But kmap_atomic can
- * be used in IRQ contexts, so in some (very limited) cases we need
- * it.
- */
-static inline void *kmap_atomic_prot(struct page *page, enum km_type type, pgprot_t prot)
-{
- unsigned int idx;
- unsigned long vaddr;
-
- /* even !CONFIG_PREEMPT needs this, for in_atomic in do_page_fault */
- pagefault_disable();
- if (!PageHighMem(page))
- return page_address(page);
-
- debug_kmap_atomic(type);
- idx = type + KM_TYPE_NR*smp_processor_id();
- vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
-#ifdef CONFIG_DEBUG_HIGHMEM
- BUG_ON(!pte_none(*(kmap_pte-idx)));
-#endif
- __set_pte_at(&init_mm, vaddr, kmap_pte-idx, mk_pte(page, prot), 1);
- local_flush_tlb_page(NULL, vaddr);
-
- return (void*) vaddr;
-}
-
static inline void *kmap_atomic(struct page *page, enum km_type type)
{
return kmap_atomic_prot(page, type, kmap_prot);
}
-static inline void kunmap_atomic(void *kvaddr, enum km_type type)
-{
-#ifdef CONFIG_DEBUG_HIGHMEM
- unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK;
- enum fixed_addresses idx = type + KM_TYPE_NR*smp_processor_id();
-
- if (vaddr < __fix_to_virt(FIX_KMAP_END)) {
- pagefault_enable();
- return;
- }
-
- BUG_ON(vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx));
-
- /*
- * force other mappings to Oops if they'll try to access
- * this pte without first remap it
- */
- pte_clear(&init_mm, vaddr, kmap_pte-idx);
- local_flush_tlb_page(NULL, vaddr);
-#endif
- pagefault_enable();
-}
-
static inline struct page *kmap_atomic_to_page(void *ptr)
{
unsigned long idx, vaddr = (unsigned long) ptr;
@@ -148,6 +98,7 @@
return pte_page(*pte);
}
+
#define flush_cache_kmaps() flush_cache_all()
#endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/hw_irq.h b/arch/powerpc/include/asm/hw_irq.h
index 867ab8e..8b505ea 100644
--- a/arch/powerpc/include/asm/hw_irq.h
+++ b/arch/powerpc/include/asm/hw_irq.h
@@ -68,13 +68,13 @@
#if defined(CONFIG_BOOKE)
#define SET_MSR_EE(x) mtmsr(x)
-#define local_irq_restore(flags) __asm__ __volatile__("wrtee %0" : : "r" (flags) : "memory")
+#define raw_local_irq_restore(flags) __asm__ __volatile__("wrtee %0" : : "r" (flags) : "memory")
#else
#define SET_MSR_EE(x) mtmsr(x)
-#define local_irq_restore(flags) mtmsr(flags)
+#define raw_local_irq_restore(flags) mtmsr(flags)
#endif
-static inline void local_irq_disable(void)
+static inline void raw_local_irq_disable(void)
{
#ifdef CONFIG_BOOKE
__asm__ __volatile__("wrteei 0": : :"memory");
@@ -86,7 +86,7 @@
#endif
}
-static inline void local_irq_enable(void)
+static inline void raw_local_irq_enable(void)
{
#ifdef CONFIG_BOOKE
__asm__ __volatile__("wrteei 1": : :"memory");
@@ -98,7 +98,7 @@
#endif
}
-static inline void local_irq_save_ptr(unsigned long *flags)
+static inline void raw_local_irq_save_ptr(unsigned long *flags)
{
unsigned long msr;
msr = mfmsr();
@@ -110,12 +110,12 @@
#endif
}
-#define local_save_flags(flags) ((flags) = mfmsr())
-#define local_irq_save(flags) local_irq_save_ptr(&flags)
-#define irqs_disabled() ((mfmsr() & MSR_EE) == 0)
+#define raw_local_save_flags(flags) ((flags) = mfmsr())
+#define raw_local_irq_save(flags) raw_local_irq_save_ptr(&flags)
+#define raw_irqs_disabled() ((mfmsr() & MSR_EE) == 0)
+#define raw_irqs_disabled_flags(flags) (((flags) & MSR_EE) == 0)
-#define hard_irq_enable() local_irq_enable()
-#define hard_irq_disable() local_irq_disable()
+#define hard_irq_disable() raw_local_irq_disable()
static inline int irqs_disabled_flags(unsigned long flags)
{
diff --git a/arch/powerpc/include/asm/pte-hash64-64k.h b/arch/powerpc/include/asm/pte-hash64-64k.h
index e05d26f..82b7220 100644
--- a/arch/powerpc/include/asm/pte-hash64-64k.h
+++ b/arch/powerpc/include/asm/pte-hash64-64k.h
@@ -47,7 +47,8 @@
* generic accessors and iterators here
*/
#define __real_pte(e,p) ((real_pte_t) { \
- (e), pte_val(*((p) + PTRS_PER_PTE)) })
+ (e), ((e) & _PAGE_COMBO) ? \
+ (pte_val(*((p) + PTRS_PER_PTE))) : 0 })
#define __rpte_to_hidx(r,index) ((pte_val((r).pte) & _PAGE_COMBO) ? \
(((r).hidx >> ((index)<<2)) & 0xf) : ((pte_val((r).pte) >> 12) & 0xf))
#define __rpte_to_pte(r) ((r).pte)
diff --git a/arch/powerpc/include/asm/rtas.h b/arch/powerpc/include/asm/rtas.h
index 01c1233..168fce7 100644
--- a/arch/powerpc/include/asm/rtas.h
+++ b/arch/powerpc/include/asm/rtas.h
@@ -58,7 +58,7 @@
unsigned long entry; /* physical address pointer */
unsigned long base; /* physical address pointer */
unsigned long size;
- spinlock_t lock;
+ raw_spinlock_t lock;
struct rtas_args args;
struct device_node *dev; /* virtual address pointer */
};
@@ -245,5 +245,8 @@
(devfn << 8) | (reg & 0xff);
}
+extern void __cpuinit rtas_give_timebase(void);
+extern void __cpuinit rtas_take_timebase(void);
+
#endif /* __KERNEL__ */
#endif /* _POWERPC_RTAS_H */
diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index 4dd38f1..3cadba6 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -191,11 +191,49 @@
mflr r9
lwz r11,0(r9) /* virtual address of handler */
lwz r9,4(r9) /* where to go when done */
+#ifdef CONFIG_TRACE_IRQFLAGS
+ lis r12,reenable_mmu@h
+ ori r12,r12,reenable_mmu@l
+ mtspr SPRN_SRR0,r12
+ mtspr SPRN_SRR1,r10
+ SYNC
+ RFI
+reenable_mmu: /* re-enable mmu so we can */
+ mfmsr r10
+ lwz r12,_MSR(r1)
+ xor r10,r10,r12
+ andi. r10,r10,MSR_EE /* Did EE change? */
+ beq 1f
+
+ /* Save handler and return address into the 2 unused words
+ * of the STACK_FRAME_OVERHEAD (sneak sneak sneak). Everything
+ * else can be recovered from the pt_regs except r3 which for
+ * normal interrupts has been set to pt_regs and for syscalls
+ * is an argument, so we temporarily use ORIG_GPR3 to save it
+ */
+ stw r9,8(r1)
+ stw r11,12(r1)
+ stw r3,ORIG_GPR3(r1)
+ bl trace_hardirqs_off
+ lwz r0,GPR0(r1)
+ lwz r3,ORIG_GPR3(r1)
+ lwz r4,GPR4(r1)
+ lwz r5,GPR5(r1)
+ lwz r6,GPR6(r1)
+ lwz r7,GPR7(r1)
+ lwz r8,GPR8(r1)
+ lwz r9,8(r1)
+ lwz r11,12(r1)
+1: mtctr r11
+ mtlr r9
+ bctr /* jump to handler */
+#else /* CONFIG_TRACE_IRQFLAGS */
mtspr SPRN_SRR0,r11
mtspr SPRN_SRR1,r10
mtlr r9
SYNC
RFI /* jump to handler, enable MMU */
+#endif /* CONFIG_TRACE_IRQFLAGS */
#if defined (CONFIG_6xx) || defined(CONFIG_E500)
4: rlwinm r12,r12,0,~_TLF_NAPPING
@@ -251,6 +289,31 @@
#ifdef SHOW_SYSCALLS
bl do_show_syscall
#endif /* SHOW_SYSCALLS */
+#ifdef CONFIG_TRACE_IRQFLAGS
+ /* Return from syscalls can (and generally will) hard enable
+ * interrupts. You aren't supposed to call a syscall with
+ * interrupts disabled in the first place. However, to ensure
+ * that we get it right vs. lockdep if it happens, we force
+ * that hard enable here with appropriate tracing if we see
+ * that we have been called with interrupts off
+ */
+ mfmsr r11
+ andi. r12,r11,MSR_EE
+ bne+ 1f
+ /* We came in with interrupts disabled, we enable them now */
+ bl trace_hardirqs_on
+ mfmsr r11
+ lwz r0,GPR0(r1)
+ lwz r3,GPR3(r1)
+ lwz r4,GPR4(r1)
+ ori r11,r11,MSR_EE
+ lwz r5,GPR5(r1)
+ lwz r6,GPR6(r1)
+ lwz r7,GPR7(r1)
+ lwz r8,GPR8(r1)
+ mtmsr r11
+1:
+#endif /* CONFIG_TRACE_IRQFLAGS */
rlwinm r10,r1,0,0,(31-THREAD_SHIFT) /* current_thread_info() */
lwz r11,TI_FLAGS(r10)
andi. r11,r11,_TIF_SYSCALL_T_OR_A
@@ -275,6 +338,7 @@
rlwinm r12,r1,0,0,(31-THREAD_SHIFT) /* current_thread_info() */
/* disable interrupts so current_thread_info()->flags can't change */
LOAD_MSR_KERNEL(r10,MSR_KERNEL) /* doesn't include MSR_EE */
+ /* Note: We don't bother telling lockdep about it */
SYNC
MTMSRD(r10)
lwz r9,TI_FLAGS(r12)
@@ -288,6 +352,19 @@
oris r11,r11,0x1000 /* Set SO bit in CR */
stw r11,_CCR(r1)
syscall_exit_cont:
+ lwz r8,_MSR(r1)
+#ifdef CONFIG_TRACE_IRQFLAGS
+ /* If we are going to return from the syscall with interrupts
+ * off, we trace that here. It shouldn't happen though but we
+ * want to catch the bugger if it does right ?
+ */
+ andi. r10,r8,MSR_EE
+ bne+ 1f
+ stw r3,GPR3(r1)
+ bl trace_hardirqs_off
+ lwz r3,GPR3(r1)
+1:
+#endif /* CONFIG_TRACE_IRQFLAGS */
#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
/* If the process has its own DBCR0 value, load it up. The internal
debug mode bit tells us that dbcr0 should be loaded. */
@@ -311,7 +388,6 @@
mtlr r4
mtcr r5
lwz r7,_NIP(r1)
- lwz r8,_MSR(r1)
FIX_SRR1(r8, r0)
lwz r2,GPR2(r1)
lwz r1,GPR1(r1)
@@ -394,7 +470,9 @@
andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP)
beq ret_from_except
- /* Re-enable interrupts */
+ /* Re-enable interrupts. There is no need to trace that with
+ * lockdep as we are supposed to have IRQs on at this point
+ */
ori r10,r10,MSR_EE
SYNC
MTMSRD(r10)
@@ -705,6 +783,7 @@
/* Hard-disable interrupts so that current_thread_info()->flags
* can't change between when we test it and when we return
* from the interrupt. */
+ /* Note: We don't bother telling lockdep about it */
LOAD_MSR_KERNEL(r10,MSR_KERNEL)
SYNC /* Some chip revs have problems here... */
MTMSRD(r10) /* disable interrupts */
@@ -744,11 +823,24 @@
beq+ restore
andi. r0,r3,MSR_EE /* interrupts off? */
beq restore /* don't schedule if so */
+#ifdef CONFIG_TRACE_IRQFLAGS
+ /* Lockdep thinks irqs are enabled, we need to call
+ * preempt_schedule_irq with IRQs off, so we inform lockdep
+ * now that we -did- turn them off already
+ */
+ bl trace_hardirqs_off
+#endif
1: bl preempt_schedule_irq
rlwinm r9,r1,0,0,(31-THREAD_SHIFT)
lwz r3,TI_FLAGS(r9)
andi. r0,r3,_TIF_NEED_RESCHED
bne- 1b
+#ifdef CONFIG_TRACE_IRQFLAGS
+ /* And now, to properly rebalance the above, we tell lockdep they
+ * are being turned back on, which will happen when we return
+ */
+ bl trace_hardirqs_on
+#endif
#else
resume_kernel:
#endif /* CONFIG_PREEMPT */
@@ -765,6 +857,28 @@
stw r6,icache_44x_need_flush@l(r4)
1:
#endif /* CONFIG_44x */
+
+ lwz r9,_MSR(r1)
+#ifdef CONFIG_TRACE_IRQFLAGS
+ /* Lockdep doesn't know about the fact that IRQs are temporarily turned
+ * off in this assembly code while peeking at TI_FLAGS() and such. However
+ * we need to inform it if the exception turned interrupts off, and we
+ * are about to trun them back on.
+ *
+ * The problem here sadly is that we don't know whether the exceptions was
+ * one that turned interrupts off or not. So we always tell lockdep about
+ * turning them on here when we go back to wherever we came from with EE
+ * on, even if that may meen some redudant calls being tracked. Maybe later
+ * we could encode what the exception did somewhere or test the exception
+ * type in the pt_regs but that sounds overkill
+ */
+ andi. r10,r9,MSR_EE
+ beq 1f
+ bl trace_hardirqs_on
+ lwz r9,_MSR(r1)
+1:
+#endif /* CONFIG_TRACE_IRQFLAGS */
+
lwz r0,GPR0(r1)
lwz r2,GPR2(r1)
REST_4GPRS(3, r1)
@@ -782,7 +896,6 @@
stwcx. r0,0,r1 /* to clear the reservation */
#if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE))
- lwz r9,_MSR(r1)
andi. r10,r9,MSR_RI /* check if this exception occurred */
beql nonrecoverable /* at a bad place (MSR:RI = 0) */
@@ -805,7 +918,6 @@
MTMSRD(r10) /* clear the RI bit */
.globl exc_exit_restart
exc_exit_restart:
- lwz r9,_MSR(r1)
lwz r12,_NIP(r1)
FIX_SRR1(r9,r10)
mtspr SPRN_SRR0,r12
@@ -1035,11 +1147,18 @@
beq do_user_signal
do_resched: /* r10 contains MSR_KERNEL here */
+ /* Note: We don't need to inform lockdep that we are enabling
+ * interrupts here. As far as it knows, they are already enabled
+ */
ori r10,r10,MSR_EE
SYNC
MTMSRD(r10) /* hard-enable interrupts */
bl schedule
recheck:
+ /* Note: And we don't tell it we are disabling them again
+ * neither. Those disable/enable cycles used to peek at
+ * TI_FLAGS aren't advertised.
+ */
LOAD_MSR_KERNEL(r10,MSR_KERNEL)
SYNC
MTMSRD(r10) /* disable interrupts */
diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S
index 4846946..fc21329 100644
--- a/arch/powerpc/kernel/head_32.S
+++ b/arch/powerpc/kernel/head_32.S
@@ -1124,9 +1124,8 @@
RFI
/*
- * Use the first pair of BAT registers to map the 1st 16MB
- * of RAM to PAGE_OFFSET. From this point on we can't safely
- * call OF any more.
+ * On 601, we use 3 BATs to map up to 24M of RAM at _PAGE_OFFSET
+ * (we keep one for debugging) and on others, we use one 256M BAT.
*/
initial_bats:
lis r11,PAGE_OFFSET@h
@@ -1136,12 +1135,16 @@
bne 4f
ori r11,r11,4 /* set up BAT registers for 601 */
li r8,0x7f /* valid, block length = 8MB */
- oris r9,r11,0x800000@h /* set up BAT reg for 2nd 8M */
- oris r10,r8,0x800000@h /* set up BAT reg for 2nd 8M */
mtspr SPRN_IBAT0U,r11 /* N.B. 601 has valid bit in */
mtspr SPRN_IBAT0L,r8 /* lower BAT register */
- mtspr SPRN_IBAT1U,r9
- mtspr SPRN_IBAT1L,r10
+ addis r11,r11,0x800000@h
+ addis r8,r8,0x800000@h
+ mtspr SPRN_IBAT1U,r11
+ mtspr SPRN_IBAT1L,r8
+ addis r11,r11,0x800000@h
+ addis r8,r8,0x800000@h
+ mtspr SPRN_IBAT2U,r11
+ mtspr SPRN_IBAT2L,r8
isync
blr
diff --git a/arch/powerpc/kernel/of_device.c b/arch/powerpc/kernel/of_device.c
index fa983a5..a359cb0 100644
--- a/arch/powerpc/kernel/of_device.c
+++ b/arch/powerpc/kernel/of_device.c
@@ -76,7 +76,7 @@
dev->dev.archdata.of_node = np;
if (bus_id)
- dev_set_name(&dev->dev, bus_id);
+ dev_set_name(&dev->dev, "%s", bus_id);
else
of_device_make_bus_id(dev);
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 3e7135bb..892a9f2 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -528,7 +528,7 @@
for (i = 0; i < 32; i++) {
if ((i % REGS_PER_LINE) == 0)
- printk("\n" KERN_INFO "GPR%02d: ", i);
+ printk("\nGPR%02d: ", i);
printk(REG " ", regs->gpr[i]);
if (i == LAST_VOLATILE && !FULL_REGS(regs))
break;
diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c
index ee4c760..c434823 100644
--- a/arch/powerpc/kernel/rtas.c
+++ b/arch/powerpc/kernel/rtas.c
@@ -38,9 +38,10 @@
#include <asm/syscalls.h>
#include <asm/smp.h>
#include <asm/atomic.h>
+#include <asm/time.h>
struct rtas_t rtas = {
- .lock = SPIN_LOCK_UNLOCKED
+ .lock = __RAW_SPIN_LOCK_UNLOCKED
};
EXPORT_SYMBOL(rtas);
@@ -67,6 +68,28 @@
void (*rtas_flash_term_hook)(int);
EXPORT_SYMBOL(rtas_flash_term_hook);
+/* RTAS use home made raw locking instead of spin_lock_irqsave
+ * because those can be called from within really nasty contexts
+ * such as having the timebase stopped which would lockup with
+ * normal locks and spinlock debugging enabled
+ */
+static unsigned long lock_rtas(void)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ preempt_disable();
+ __raw_spin_lock_flags(&rtas.lock, flags);
+ return flags;
+}
+
+static void unlock_rtas(unsigned long flags)
+{
+ __raw_spin_unlock(&rtas.lock);
+ local_irq_restore(flags);
+ preempt_enable();
+}
+
/*
* call_rtas_display_status and call_rtas_display_status_delay
* are designed only for very early low-level debugging, which
@@ -79,7 +102,7 @@
if (!rtas.base)
return;
- spin_lock_irqsave(&rtas.lock, s);
+ s = lock_rtas();
args->token = 10;
args->nargs = 1;
@@ -89,7 +112,7 @@
enter_rtas(__pa(args));
- spin_unlock_irqrestore(&rtas.lock, s);
+ unlock_rtas(s);
}
static void call_rtas_display_status_delay(char c)
@@ -411,8 +434,7 @@
if (!rtas.entry || token == RTAS_UNKNOWN_SERVICE)
return -1;
- /* Gotta do something different here, use global lock for now... */
- spin_lock_irqsave(&rtas.lock, s);
+ s = lock_rtas();
rtas_args = &rtas.args;
rtas_args->token = token;
@@ -439,8 +461,7 @@
outputs[i] = rtas_args->rets[i+1];
ret = (nret > 0)? rtas_args->rets[0]: 0;
- /* Gotta do something different here, use global lock for now... */
- spin_unlock_irqrestore(&rtas.lock, s);
+ unlock_rtas(s);
if (buff_copy) {
log_error(buff_copy, ERR_TYPE_RTAS_LOG, 0);
@@ -837,7 +858,7 @@
buff_copy = get_errorlog_buffer();
- spin_lock_irqsave(&rtas.lock, flags);
+ flags = lock_rtas();
rtas.args = args;
enter_rtas(__pa(&rtas.args));
@@ -848,7 +869,7 @@
if (args.rets[0] == -1)
errbuf = __fetch_rtas_last_error(buff_copy);
- spin_unlock_irqrestore(&rtas.lock, flags);
+ unlock_rtas(flags);
if (buff_copy) {
if (errbuf)
@@ -951,3 +972,33 @@
/* break now */
return 1;
}
+
+static raw_spinlock_t timebase_lock;
+static u64 timebase = 0;
+
+void __cpuinit rtas_give_timebase(void)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ hard_irq_disable();
+ __raw_spin_lock(&timebase_lock);
+ rtas_call(rtas_token("freeze-time-base"), 0, 1, NULL);
+ timebase = get_tb();
+ __raw_spin_unlock(&timebase_lock);
+
+ while (timebase)
+ barrier();
+ rtas_call(rtas_token("thaw-time-base"), 0, 1, NULL);
+ local_irq_restore(flags);
+}
+
+void __cpuinit rtas_take_timebase(void)
+{
+ while (!timebase)
+ barrier();
+ __raw_spin_lock(&timebase_lock);
+ set_tb(timebase >> 32, timebase & 0xffffffff);
+ timebase = 0;
+ __raw_spin_unlock(&timebase_lock);
+}
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index 1d15424..e1e3059 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -119,6 +119,8 @@
*/
notrace void __init machine_init(unsigned long dt_ptr)
{
+ lockdep_init();
+
/* Enable early debugging if any specified (see udbg.h) */
udbg_early_init();
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 65484b2..0b47de0 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -68,7 +68,8 @@
/* SMP operations for this machine */
struct smp_ops_t *smp_ops;
-static volatile unsigned int cpu_callin_map[NR_CPUS];
+/* Can't be static due to PowerMac hackery */
+volatile unsigned int cpu_callin_map[NR_CPUS];
int smt_enabled_at_boot = 1;
diff --git a/arch/powerpc/kernel/udbg_16550.c b/arch/powerpc/kernel/udbg_16550.c
index 0362a89..acb74a1 100644
--- a/arch/powerpc/kernel/udbg_16550.c
+++ b/arch/powerpc/kernel/udbg_16550.c
@@ -219,7 +219,7 @@
#ifdef CONFIG_PPC_EARLY_DEBUG_44x
#include <platforms/44x/44x.h>
-static int udbg_44x_as1_flush(void)
+static void udbg_44x_as1_flush(void)
{
if (udbg_comport) {
while ((as1_readb(&udbg_comport->lsr) & LSR_THRE) == 0)
diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile
index 2d2192e..3e68363 100644
--- a/arch/powerpc/mm/Makefile
+++ b/arch/powerpc/mm/Makefile
@@ -30,3 +30,4 @@
obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
obj-$(CONFIG_PPC_SUBPAGE_PROT) += subpage-prot.o
obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-noncoherent.o
+obj-$(CONFIG_HIGHMEM) += highmem.o
diff --git a/arch/powerpc/mm/highmem.c b/arch/powerpc/mm/highmem.c
new file mode 100644
index 0000000..c2186c7
--- /dev/null
+++ b/arch/powerpc/mm/highmem.c
@@ -0,0 +1,77 @@
+/*
+ * highmem.c: virtual kernel memory mappings for high memory
+ *
+ * PowerPC version, stolen from the i386 version.
+ *
+ * Used in CONFIG_HIGHMEM systems for memory pages which
+ * are not addressable by direct kernel virtual addresses.
+ *
+ * Copyright (C) 1999 Gerhard Wichert, Siemens AG
+ * Gerhard.Wichert@pdb.siemens.de
+ *
+ *
+ * Redesigned the x86 32-bit VM architecture to deal with
+ * up to 16 Terrabyte physical memory. With current x86 CPUs
+ * we now support up to 64 Gigabytes physical RAM.
+ *
+ * Copyright (C) 1999 Ingo Molnar <mingo@redhat.com>
+ *
+ * Reworked for PowerPC by various contributors. Moved from
+ * highmem.h by Benjamin Herrenschmidt (c) 2009 IBM Corp.
+ */
+
+#include <linux/highmem.h>
+#include <linux/module.h>
+
+/*
+ * The use of kmap_atomic/kunmap_atomic is discouraged - kmap/kunmap
+ * gives a more generic (and caching) interface. But kmap_atomic can
+ * be used in IRQ contexts, so in some (very limited) cases we need
+ * it.
+ */
+void *kmap_atomic_prot(struct page *page, enum km_type type, pgprot_t prot)
+{
+ unsigned int idx;
+ unsigned long vaddr;
+
+ /* even !CONFIG_PREEMPT needs this, for in_atomic in do_page_fault */
+ pagefault_disable();
+ if (!PageHighMem(page))
+ return page_address(page);
+
+ debug_kmap_atomic(type);
+ idx = type + KM_TYPE_NR*smp_processor_id();
+ vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
+#ifdef CONFIG_DEBUG_HIGHMEM
+ BUG_ON(!pte_none(*(kmap_pte-idx)));
+#endif
+ __set_pte_at(&init_mm, vaddr, kmap_pte-idx, mk_pte(page, prot), 1);
+ local_flush_tlb_page(NULL, vaddr);
+
+ return (void*) vaddr;
+}
+EXPORT_SYMBOL(kmap_atomic_prot);
+
+void kunmap_atomic(void *kvaddr, enum km_type type)
+{
+#ifdef CONFIG_DEBUG_HIGHMEM
+ unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK;
+ enum fixed_addresses idx = type + KM_TYPE_NR*smp_processor_id();
+
+ if (vaddr < __fix_to_virt(FIX_KMAP_END)) {
+ pagefault_enable();
+ return;
+ }
+
+ BUG_ON(vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx));
+
+ /*
+ * force other mappings to Oops if they'll try to access
+ * this pte without first remap it
+ */
+ pte_clear(&init_mm, vaddr, kmap_pte-idx);
+ local_flush_tlb_page(NULL, vaddr);
+#endif
+ pagefault_enable();
+}
+EXPORT_SYMBOL(kunmap_atomic);
diff --git a/arch/powerpc/platforms/44x/warp.c b/arch/powerpc/platforms/44x/warp.c
index 42e09a9..0362c88 100644
--- a/arch/powerpc/platforms/44x/warp.c
+++ b/arch/powerpc/platforms/44x/warp.c
@@ -16,6 +16,7 @@
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/of_gpio.h>
+#include <linux/of_i2c.h>
#include <asm/machdep.h>
#include <asm/prom.h>
@@ -65,7 +66,6 @@
static u32 post_info;
-/* I am not sure this is the best place for this... */
static int __init warp_post_info(void)
{
struct device_node *np;
@@ -194,9 +194,9 @@
return 0;
}
-static void pika_setup_critical_temp(struct i2c_client *client)
+static void pika_setup_critical_temp(struct device_node *np,
+ struct i2c_client *client)
{
- struct device_node *np;
int irq, rc;
/* Do this before enabling critical temp interrupt since we
@@ -208,14 +208,7 @@
i2c_smbus_write_byte_data(client, 2, 65); /* Thigh */
i2c_smbus_write_byte_data(client, 3, 0); /* Tlow */
- np = of_find_compatible_node(NULL, NULL, "adi,ad7414");
- if (np == NULL) {
- printk(KERN_ERR __FILE__ ": Unable to find ad7414\n");
- return;
- }
-
irq = irq_of_parse_and_map(np, 0);
- of_node_put(np);
if (irq == NO_IRQ) {
printk(KERN_ERR __FILE__ ": Unable to get ad7414 irq\n");
return;
@@ -244,32 +237,24 @@
static int pika_dtm_thread(void __iomem *fpga)
{
- struct i2c_adapter *adap;
+ struct device_node *np;
struct i2c_client *client;
- /* We loop in case either driver was compiled as a module and
- * has not been insmoded yet.
- */
- while (!(adap = i2c_get_adapter(0))) {
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(HZ);
+ np = of_find_compatible_node(NULL, NULL, "adi,ad7414");
+ if (np == NULL)
+ return -ENOENT;
+
+ client = of_find_i2c_device_by_node(np);
+ if (client == NULL) {
+ of_node_put(np);
+ return -ENOENT;
}
- while (1) {
- list_for_each_entry(client, &adap->clients, list)
- if (client->addr == 0x4a)
- goto found_it;
+ pika_setup_critical_temp(np, client);
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(HZ);
- }
+ of_node_put(np);
-found_it:
- pika_setup_critical_temp(client);
-
- i2c_put_adapter(adap);
-
- printk(KERN_INFO "PIKA DTM thread running.\n");
+ printk(KERN_INFO "Warp DTM thread running.\n");
while (!kthread_should_stop()) {
int val;
@@ -291,7 +276,6 @@
return 0;
}
-
static int __init pika_dtm_start(void)
{
struct task_struct *dtm_thread;
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index 77f90b3..60ed9c0 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -285,6 +285,7 @@
{ .type = "qe", },
{ .compatible = "fsl,qe", },
{ .compatible = "gianfar", },
+ { .compatible = "fsl,rapidio-delta", },
{},
};
diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c
index cc0b0db..62c592ede6 100644
--- a/arch/powerpc/platforms/85xx/smp.c
+++ b/arch/powerpc/platforms/85xx/smp.c
@@ -52,20 +52,19 @@
pr_debug("smp_85xx_kick_cpu: kick CPU #%d\n", nr);
- local_irq_save(flags);
-
np = of_get_cpu_node(nr, NULL);
cpu_rel_addr = of_get_property(np, "cpu-release-addr", NULL);
if (cpu_rel_addr == NULL) {
printk(KERN_ERR "No cpu-release-addr for cpu %d\n", nr);
- local_irq_restore(flags);
return;
}
/* Map the spin table */
bptr_vaddr = ioremap(*cpu_rel_addr, SIZE_BOOT_ENTRY);
+ local_irq_save(flags);
+
out_be32(bptr_vaddr + BOOT_ENTRY_PIR, nr);
out_be32(bptr_vaddr + BOOT_ENTRY_ADDR_LOWER, __pa(__early_start));
@@ -73,10 +72,10 @@
while ((__secondary_hold_acknowledge != nr) && (++n < 1000))
mdelay(1);
- iounmap(bptr_vaddr);
-
local_irq_restore(flags);
+ iounmap(bptr_vaddr);
+
pr_debug("waited %d msecs for CPU #%d.\n", n, nr);
}
diff --git a/arch/powerpc/platforms/85xx/socrates.c b/arch/powerpc/platforms/85xx/socrates.c
index d0e8443..747d8fb 100644
--- a/arch/powerpc/platforms/85xx/socrates.c
+++ b/arch/powerpc/platforms/85xx/socrates.c
@@ -102,10 +102,11 @@
{},
};
-static void __init socrates_init(void)
+static int __init socrates_publish_devices(void)
{
- of_platform_bus_probe(NULL, socrates_of_bus_ids, NULL);
+ return of_platform_bus_probe(NULL, socrates_of_bus_ids, NULL);
}
+machine_device_initcall(socrates, socrates_publish_devices);
/*
* Called very early, device-tree isn't unflattened
@@ -124,7 +125,6 @@
.name = "Socrates",
.probe = socrates_probe,
.setup_arch = socrates_setup_arch,
- .init = socrates_init,
.init_IRQ = socrates_pic_init,
.get_irq = mpic_get_irq,
.restart = fsl_rstcr_restart,
diff --git a/arch/powerpc/platforms/85xx/xes_mpc85xx.c b/arch/powerpc/platforms/85xx/xes_mpc85xx.c
index ee01532..1b42605 100644
--- a/arch/powerpc/platforms/85xx/xes_mpc85xx.c
+++ b/arch/powerpc/platforms/85xx/xes_mpc85xx.c
@@ -32,7 +32,6 @@
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
-#include <linux/of_platform.h>
/* A few bit definitions needed for fixups on some boards */
#define MPC85xx_L2CTL_L2E 0x80000000 /* L2 enable */
diff --git a/arch/powerpc/platforms/cell/smp.c b/arch/powerpc/platforms/cell/smp.c
index 9046803..bc97fad 100644
--- a/arch/powerpc/platforms/cell/smp.c
+++ b/arch/powerpc/platforms/cell/smp.c
@@ -36,7 +36,6 @@
#include <asm/prom.h>
#include <asm/smp.h>
#include <asm/paca.h>
-#include <asm/time.h>
#include <asm/machdep.h>
#include <asm/cputable.h>
#include <asm/firmware.h>
@@ -140,31 +139,6 @@
mtspr(SPRN_DABRX, DABRX_KERNEL | DABRX_USER);
}
-static DEFINE_SPINLOCK(timebase_lock);
-static unsigned long timebase = 0;
-
-static void __devinit cell_give_timebase(void)
-{
- spin_lock(&timebase_lock);
- rtas_call(rtas_token("freeze-time-base"), 0, 1, NULL);
- timebase = get_tb();
- spin_unlock(&timebase_lock);
-
- while (timebase)
- barrier();
- rtas_call(rtas_token("thaw-time-base"), 0, 1, NULL);
-}
-
-static void __devinit cell_take_timebase(void)
-{
- while (!timebase)
- barrier();
- spin_lock(&timebase_lock);
- set_tb(timebase >> 32, timebase & 0xffffffff);
- timebase = 0;
- spin_unlock(&timebase_lock);
-}
-
static void __devinit smp_cell_kick_cpu(int nr)
{
BUG_ON(nr < 0 || nr >= NR_CPUS);
@@ -224,8 +198,8 @@
/* Non-lpar has additional take/give timebase */
if (rtas_token("freeze-time-base") != RTAS_UNKNOWN_SERVICE) {
- smp_ops->give_timebase = cell_give_timebase;
- smp_ops->take_timebase = cell_take_timebase;
+ smp_ops->give_timebase = rtas_give_timebase;
+ smp_ops->take_timebase = rtas_take_timebase;
}
DBG(" <- smp_init_cell()\n");
diff --git a/arch/powerpc/platforms/chrp/smp.c b/arch/powerpc/platforms/chrp/smp.c
index 10a4a4d..02cafec 100644
--- a/arch/powerpc/platforms/chrp/smp.c
+++ b/arch/powerpc/platforms/chrp/smp.c
@@ -26,7 +26,6 @@
#include <asm/io.h>
#include <asm/prom.h>
#include <asm/smp.h>
-#include <asm/time.h>
#include <asm/machdep.h>
#include <asm/mpic.h>
#include <asm/rtas.h>
@@ -42,40 +41,12 @@
mpic_setup_this_cpu();
}
-static DEFINE_SPINLOCK(timebase_lock);
-static unsigned int timebase_upper = 0, timebase_lower = 0;
-
-void __devinit smp_chrp_give_timebase(void)
-{
- spin_lock(&timebase_lock);
- rtas_call(rtas_token("freeze-time-base"), 0, 1, NULL);
- timebase_upper = get_tbu();
- timebase_lower = get_tbl();
- spin_unlock(&timebase_lock);
-
- while (timebase_upper || timebase_lower)
- barrier();
- rtas_call(rtas_token("thaw-time-base"), 0, 1, NULL);
-}
-
-void __devinit smp_chrp_take_timebase(void)
-{
- while (!(timebase_upper || timebase_lower))
- barrier();
- spin_lock(&timebase_lock);
- set_tb(timebase_upper, timebase_lower);
- timebase_upper = 0;
- timebase_lower = 0;
- spin_unlock(&timebase_lock);
- printk("CPU %i taken timebase\n", smp_processor_id());
-}
-
/* CHRP with openpic */
struct smp_ops_t chrp_smp_ops = {
.message_pass = smp_mpic_message_pass,
.probe = smp_mpic_probe,
.kick_cpu = smp_chrp_kick_cpu,
.setup_cpu = smp_chrp_setup_cpu,
- .give_timebase = smp_chrp_give_timebase,
- .take_timebase = smp_chrp_take_timebase,
+ .give_timebase = rtas_give_timebase,
+ .take_timebase = rtas_take_timebase,
};
diff --git a/arch/powerpc/platforms/pasemi/setup.c b/arch/powerpc/platforms/pasemi/setup.c
index 153051e..a461934 100644
--- a/arch/powerpc/platforms/pasemi/setup.c
+++ b/arch/powerpc/platforms/pasemi/setup.c
@@ -71,20 +71,25 @@
}
#ifdef CONFIG_SMP
-static DEFINE_SPINLOCK(timebase_lock);
+static raw_spinlock_t timebase_lock;
static unsigned long timebase;
static void __devinit pas_give_timebase(void)
{
- spin_lock(&timebase_lock);
+ unsigned long flags;
+
+ local_irq_save(flags);
+ hard_irq_disable();
+ __raw_spin_lock(&timebase_lock);
mtspr(SPRN_TBCTL, TBCTL_FREEZE);
isync();
timebase = get_tb();
- spin_unlock(&timebase_lock);
+ __raw_spin_unlock(&timebase_lock);
while (timebase)
barrier();
mtspr(SPRN_TBCTL, TBCTL_RESTART);
+ local_irq_restore(flags);
}
static void __devinit pas_take_timebase(void)
@@ -92,10 +97,10 @@
while (!timebase)
smp_rmb();
- spin_lock(&timebase_lock);
+ __raw_spin_lock(&timebase_lock);
set_tb(timebase >> 32, timebase & 0xffffffff);
timebase = 0;
- spin_unlock(&timebase_lock);
+ __raw_spin_unlock(&timebase_lock);
}
struct smp_ops_t pas_smp_ops = {
diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c
index 86f69a4..c205226 100644
--- a/arch/powerpc/platforms/powermac/setup.c
+++ b/arch/powerpc/platforms/powermac/setup.c
@@ -103,11 +103,6 @@
EXPORT_SYMBOL(smu_cmdbuf_abs);
#endif
-#ifdef CONFIG_SMP
-extern struct smp_ops_t psurge_smp_ops;
-extern struct smp_ops_t core99_smp_ops;
-#endif /* CONFIG_SMP */
-
static void pmac_show_cpuinfo(struct seq_file *m)
{
struct device_node *np;
@@ -341,34 +336,6 @@
ROOT_DEV = DEFAULT_ROOT_DEVICE;
#endif
-#ifdef CONFIG_SMP
- /* Check for Core99 */
- ic = of_find_node_by_name(NULL, "uni-n");
- if (!ic)
- ic = of_find_node_by_name(NULL, "u3");
- if (!ic)
- ic = of_find_node_by_name(NULL, "u4");
- if (ic) {
- of_node_put(ic);
- smp_ops = &core99_smp_ops;
- }
-#ifdef CONFIG_PPC32
- else {
- /*
- * We have to set bits in cpu_possible_map here since the
- * secondary CPU(s) aren't in the device tree, and
- * setup_per_cpu_areas only allocates per-cpu data for
- * CPUs in the cpu_possible_map.
- */
- int cpu;
-
- for (cpu = 1; cpu < 4 && cpu < NR_CPUS; ++cpu)
- cpu_set(cpu, cpu_possible_map);
- smp_ops = &psurge_smp_ops;
- }
-#endif
-#endif /* CONFIG_SMP */
-
#ifdef CONFIG_ADB
if (strstr(cmd_line, "adb_sync")) {
extern int __adb_probe_sync;
@@ -512,6 +479,14 @@
#ifdef CONFIG_PPC64
iommu_init_early_dart();
#endif
+
+ /* SMP Init has to be done early as we need to patch up
+ * cpu_possible_map before interrupt stacks are allocated
+ * or kaboom...
+ */
+#ifdef CONFIG_SMP
+ pmac_setup_smp();
+#endif
}
static int __init pmac_declare_of_platform_devices(void)
diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c
index cf1dbe7..6d4da7b 100644
--- a/arch/powerpc/platforms/powermac/smp.c
+++ b/arch/powerpc/platforms/powermac/smp.c
@@ -64,10 +64,11 @@
extern void __secondary_start_pmac_0(void);
extern int pmac_pfunc_base_install(void);
-#ifdef CONFIG_PPC32
+static void (*pmac_tb_freeze)(int freeze);
+static u64 timebase;
+static int tb_req;
-/* Sync flag for HW tb sync */
-static volatile int sec_tb_reset = 0;
+#ifdef CONFIG_PPC32
/*
* Powersurge (old powermac SMP) support.
@@ -294,6 +295,9 @@
psurge_quad_init();
/* All released cards using this HW design have 4 CPUs */
ncpus = 4;
+ /* No sure how timebase sync works on those, let's use SW */
+ smp_ops->give_timebase = smp_generic_give_timebase;
+ smp_ops->take_timebase = smp_generic_take_timebase;
} else {
iounmap(quad_base);
if ((in_8(hhead_base + HHEAD_CONFIG) & 0x02) == 0) {
@@ -308,18 +312,15 @@
psurge_start = ioremap(PSURGE_START, 4);
psurge_pri_intr = ioremap(PSURGE_PRI_INTR, 4);
- /*
- * This is necessary because OF doesn't know about the
+ /* This is necessary because OF doesn't know about the
* secondary cpu(s), and thus there aren't nodes in the
* device tree for them, and smp_setup_cpu_maps hasn't
- * set their bits in cpu_possible_map and cpu_present_map.
+ * set their bits in cpu_present_map.
*/
if (ncpus > NR_CPUS)
ncpus = NR_CPUS;
- for (i = 1; i < ncpus ; ++i) {
+ for (i = 1; i < ncpus ; ++i)
cpu_set(i, cpu_present_map);
- set_hard_smp_processor_id(i, i);
- }
if (ppc_md.progress) ppc_md.progress("smp_psurge_probe - done", 0x352);
@@ -329,8 +330,14 @@
static void __init smp_psurge_kick_cpu(int nr)
{
unsigned long start = __pa(__secondary_start_pmac_0) + nr * 8;
- unsigned long a;
- int i;
+ unsigned long a, flags;
+ int i, j;
+
+ /* Defining this here is evil ... but I prefer hiding that
+ * crap to avoid giving people ideas that they can do the
+ * same.
+ */
+ extern volatile unsigned int cpu_callin_map[NR_CPUS];
/* may need to flush here if secondary bats aren't setup */
for (a = KERNELBASE; a < KERNELBASE + 0x800000; a += 32)
@@ -339,47 +346,52 @@
if (ppc_md.progress) ppc_md.progress("smp_psurge_kick_cpu", 0x353);
+ /* This is going to freeze the timeebase, we disable interrupts */
+ local_irq_save(flags);
+
out_be32(psurge_start, start);
mb();
psurge_set_ipi(nr);
+
/*
* We can't use udelay here because the timebase is now frozen.
*/
for (i = 0; i < 2000; ++i)
- barrier();
+ asm volatile("nop" : : : "memory");
psurge_clr_ipi(nr);
- if (ppc_md.progress) ppc_md.progress("smp_psurge_kick_cpu - done", 0x354);
-}
-
-/*
- * With the dual-cpu powersurge board, the decrementers and timebases
- * of both cpus are frozen after the secondary cpu is started up,
- * until we give the secondary cpu another interrupt. This routine
- * uses this to get the timebases synchronized.
- * -- paulus.
- */
-static void __init psurge_dual_sync_tb(int cpu_nr)
-{
- int t;
-
- set_dec(tb_ticks_per_jiffy);
- /* XXX fixme */
- set_tb(0, 0);
-
- if (cpu_nr > 0) {
- mb();
- sec_tb_reset = 1;
- return;
+ /*
+ * Also, because the timebase is frozen, we must not return to the
+ * caller which will try to do udelay's etc... Instead, we wait -here-
+ * for the CPU to callin.
+ */
+ for (i = 0; i < 100000 && !cpu_callin_map[nr]; ++i) {
+ for (j = 1; j < 10000; j++)
+ asm volatile("nop" : : : "memory");
+ asm volatile("sync" : : : "memory");
}
+ if (!cpu_callin_map[nr])
+ goto stuck;
- /* wait for the secondary to have reset its TB before proceeding */
- for (t = 10000000; t > 0 && !sec_tb_reset; --t)
- ;
+ /* And we do the TB sync here too for standard dual CPU cards */
+ if (psurge_type == PSURGE_DUAL) {
+ while(!tb_req)
+ barrier();
+ tb_req = 0;
+ mb();
+ timebase = get_tb();
+ mb();
+ while (timebase)
+ barrier();
+ mb();
+ }
+ stuck:
+ /* now interrupt the secondary, restarting both TBs */
+ if (psurge_type == PSURGE_DUAL)
+ psurge_set_ipi(1);
- /* now interrupt the secondary, starting both TBs */
- psurge_set_ipi(1);
+ if (ppc_md.progress) ppc_md.progress("smp_psurge_kick_cpu - done", 0x354);
}
static struct irqaction psurge_irqaction = {
@@ -390,36 +402,35 @@
static void __init smp_psurge_setup_cpu(int cpu_nr)
{
+ if (cpu_nr != 0)
+ return;
- if (cpu_nr == 0) {
- /* If we failed to start the second CPU, we should still
- * send it an IPI to start the timebase & DEC or we might
- * have them stuck.
- */
- if (num_online_cpus() < 2) {
- if (psurge_type == PSURGE_DUAL)
- psurge_set_ipi(1);
- return;
- }
- /* reset the entry point so if we get another intr we won't
- * try to startup again */
- out_be32(psurge_start, 0x100);
- if (setup_irq(30, &psurge_irqaction))
- printk(KERN_ERR "Couldn't get primary IPI interrupt");
- }
-
- if (psurge_type == PSURGE_DUAL)
- psurge_dual_sync_tb(cpu_nr);
+ /* reset the entry point so if we get another intr we won't
+ * try to startup again */
+ out_be32(psurge_start, 0x100);
+ if (setup_irq(30, &psurge_irqaction))
+ printk(KERN_ERR "Couldn't get primary IPI interrupt");
}
void __init smp_psurge_take_timebase(void)
{
- /* Dummy implementation */
+ if (psurge_type != PSURGE_DUAL)
+ return;
+
+ tb_req = 1;
+ mb();
+ while (!timebase)
+ barrier();
+ mb();
+ set_tb(timebase >> 32, timebase & 0xffffffff);
+ timebase = 0;
+ mb();
+ set_dec(tb_ticks_per_jiffy/2);
}
void __init smp_psurge_give_timebase(void)
{
- /* Dummy implementation */
+ /* Nothing to do here */
}
/* PowerSurge-style Macs */
@@ -437,9 +448,6 @@
* Core 99 and later support
*/
-static void (*pmac_tb_freeze)(int freeze);
-static u64 timebase;
-static int tb_req;
static void smp_core99_give_timebase(void)
{
@@ -478,7 +486,6 @@
set_tb(timebase >> 32, timebase & 0xffffffff);
timebase = 0;
mb();
- set_dec(tb_ticks_per_jiffy/2);
local_irq_restore(flags);
}
@@ -920,3 +927,34 @@
# endif
#endif
};
+
+void __init pmac_setup_smp(void)
+{
+ struct device_node *np;
+
+ /* Check for Core99 */
+ np = of_find_node_by_name(NULL, "uni-n");
+ if (!np)
+ np = of_find_node_by_name(NULL, "u3");
+ if (!np)
+ np = of_find_node_by_name(NULL, "u4");
+ if (np) {
+ of_node_put(np);
+ smp_ops = &core99_smp_ops;
+ }
+#ifdef CONFIG_PPC32
+ else {
+ /* We have to set bits in cpu_possible_map here since the
+ * secondary CPU(s) aren't in the device tree. Various
+ * things won't be initialized for CPUs not in the possible
+ * map, so we really need to fix it up here.
+ */
+ int cpu;
+
+ for (cpu = 1; cpu < 4 && cpu < NR_CPUS; ++cpu)
+ cpu_set(cpu, cpu_possible_map);
+ smp_ops = &psurge_smp_ops;
+ }
+#endif /* CONFIG_PPC32 */
+}
+
diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c
index 1a231c3..1f8f6cf 100644
--- a/arch/powerpc/platforms/pseries/smp.c
+++ b/arch/powerpc/platforms/pseries/smp.c
@@ -35,7 +35,6 @@
#include <asm/prom.h>
#include <asm/smp.h>
#include <asm/paca.h>
-#include <asm/time.h>
#include <asm/machdep.h>
#include <asm/cputable.h>
#include <asm/firmware.h>
@@ -118,31 +117,6 @@
}
#endif /* CONFIG_XICS */
-static DEFINE_SPINLOCK(timebase_lock);
-static unsigned long timebase = 0;
-
-static void __devinit pSeries_give_timebase(void)
-{
- spin_lock(&timebase_lock);
- rtas_call(rtas_token("freeze-time-base"), 0, 1, NULL);
- timebase = get_tb();
- spin_unlock(&timebase_lock);
-
- while (timebase)
- barrier();
- rtas_call(rtas_token("thaw-time-base"), 0, 1, NULL);
-}
-
-static void __devinit pSeries_take_timebase(void)
-{
- while (!timebase)
- barrier();
- spin_lock(&timebase_lock);
- set_tb(timebase >> 32, timebase & 0xffffffff);
- timebase = 0;
- spin_unlock(&timebase_lock);
-}
-
static void __devinit smp_pSeries_kick_cpu(int nr)
{
BUG_ON(nr < 0 || nr >= NR_CPUS);
@@ -209,8 +183,8 @@
/* Non-lpar has additional take/give timebase */
if (rtas_token("freeze-time-base") != RTAS_UNKNOWN_SERVICE) {
- smp_ops->give_timebase = pSeries_give_timebase;
- smp_ops->take_timebase = pSeries_take_timebase;
+ smp_ops->give_timebase = rtas_give_timebase;
+ smp_ops->take_timebase = rtas_take_timebase;
}
pr_debug(" <- smp_init_pSeries()\n");
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index 9c3af50..d46de1f 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -279,28 +279,29 @@
}
#ifdef CONFIG_PPC_DCR
-static void _mpic_map_dcr(struct mpic *mpic, struct mpic_reg_bank *rb,
+static void _mpic_map_dcr(struct mpic *mpic, struct device_node *node,
+ struct mpic_reg_bank *rb,
unsigned int offset, unsigned int size)
{
const u32 *dbasep;
- dbasep = of_get_property(mpic->irqhost->of_node, "dcr-reg", NULL);
+ dbasep = of_get_property(node, "dcr-reg", NULL);
- rb->dhost = dcr_map(mpic->irqhost->of_node, *dbasep + offset, size);
+ rb->dhost = dcr_map(node, *dbasep + offset, size);
BUG_ON(!DCR_MAP_OK(rb->dhost));
}
-static inline void mpic_map(struct mpic *mpic, phys_addr_t phys_addr,
- struct mpic_reg_bank *rb, unsigned int offset,
- unsigned int size)
+static inline void mpic_map(struct mpic *mpic, struct device_node *node,
+ phys_addr_t phys_addr, struct mpic_reg_bank *rb,
+ unsigned int offset, unsigned int size)
{
if (mpic->flags & MPIC_USES_DCR)
- _mpic_map_dcr(mpic, rb, offset, size);
+ _mpic_map_dcr(mpic, node, rb, offset, size);
else
_mpic_map_mmio(mpic, phys_addr, rb, offset, size);
}
#else /* CONFIG_PPC_DCR */
-#define mpic_map(m,p,b,o,s) _mpic_map_mmio(m,p,b,o,s)
+#define mpic_map(m,n,p,b,o,s) _mpic_map_mmio(m,p,b,o,s)
#endif /* !CONFIG_PPC_DCR */
@@ -1052,11 +1053,10 @@
int intvec_top;
u64 paddr = phys_addr;
- mpic = alloc_bootmem(sizeof(struct mpic));
+ mpic = kzalloc(sizeof(struct mpic), GFP_KERNEL);
if (mpic == NULL)
return NULL;
-
- memset(mpic, 0, sizeof(struct mpic));
+
mpic->name = name;
mpic->hc_irq = mpic_irq_chip;
@@ -1152,8 +1152,8 @@
}
/* Map the global registers */
- mpic_map(mpic, paddr, &mpic->gregs, MPIC_INFO(GREG_BASE), 0x1000);
- mpic_map(mpic, paddr, &mpic->tmregs, MPIC_INFO(TIMER_BASE), 0x1000);
+ mpic_map(mpic, node, paddr, &mpic->gregs, MPIC_INFO(GREG_BASE), 0x1000);
+ mpic_map(mpic, node, paddr, &mpic->tmregs, MPIC_INFO(TIMER_BASE), 0x1000);
/* Reset */
if (flags & MPIC_WANTS_RESET) {
@@ -1194,7 +1194,7 @@
/* Map the per-CPU registers */
for (i = 0; i < mpic->num_cpus; i++) {
- mpic_map(mpic, paddr, &mpic->cpuregs[i],
+ mpic_map(mpic, node, paddr, &mpic->cpuregs[i],
MPIC_INFO(CPU_BASE) + i * MPIC_INFO(CPU_STRIDE),
0x1000);
}
@@ -1202,7 +1202,7 @@
/* Initialize main ISU if none provided */
if (mpic->isu_size == 0) {
mpic->isu_size = mpic->num_sources;
- mpic_map(mpic, paddr, &mpic->isus[0],
+ mpic_map(mpic, node, paddr, &mpic->isus[0],
MPIC_INFO(IRQ_BASE), MPIC_INFO(IRQ_STRIDE) * mpic->isu_size);
}
mpic->isu_shift = 1 + __ilog2(mpic->isu_size - 1);
@@ -1256,8 +1256,10 @@
BUG_ON(isu_num >= MPIC_MAX_ISU);
- mpic_map(mpic, paddr, &mpic->isus[isu_num], 0,
+ mpic_map(mpic, mpic->irqhost->of_node,
+ paddr, &mpic->isus[isu_num], 0,
MPIC_INFO(IRQ_STRIDE) * mpic->isu_size);
+
if ((isu_first + mpic->isu_size) > mpic->num_sources)
mpic->num_sources = isu_first + mpic->isu_size;
}
diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c
index b28b0e5..237e365 100644
--- a/arch/powerpc/sysdev/qe_lib/qe.c
+++ b/arch/powerpc/sysdev/qe_lib/qe.c
@@ -112,6 +112,7 @@
{
unsigned long flags;
u8 mcn_shift = 0, dev_shift = 0;
+ u32 ret;
spin_lock_irqsave(&qe_lock, flags);
if (cmd == QE_RESET) {
@@ -139,11 +140,13 @@
}
/* wait for the QE_CR_FLG to clear */
- while(in_be32(&qe_immr->cp.cecr) & QE_CR_FLG)
- cpu_relax();
+ ret = spin_event_timeout((in_be32(&qe_immr->cp.cecr) & QE_CR_FLG) == 0,
+ 100, 0);
+ /* On timeout (e.g. failure), the expression will be false (ret == 0),
+ otherwise it will be true (ret == 1). */
spin_unlock_irqrestore(&qe_lock, flags);
- return 0;
+ return ret == 1;
}
EXPORT_SYMBOL(qe_issue_cmd);
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index ac1c620..e2bdd7b 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -15,7 +15,7 @@
select HAVE_IOREMAP_PROT if MMU
select HAVE_ARCH_TRACEHOOK
select HAVE_DMA_API_DEBUG
- select HAVE_PERF_COUNTER
+ select HAVE_PERF_COUNTERS
select RTC_LIB
select GENERIC_ATOMIC64
help
@@ -71,6 +71,9 @@
config GENERIC_IRQ_PROBE
def_bool y
+config IRQ_PER_CPU
+ def_bool y
+
config GENERIC_GPIO
def_bool n
@@ -151,6 +154,9 @@
config ARCH_HAS_DEFAULT_IDLE
def_bool y
+config ARCH_HAS_CPU_IDLE_WAIT
+ def_bool y
+
config IO_TRAPPED
bool
@@ -411,6 +417,8 @@
select CPU_HAS_PTEAEX
select ARCH_SPARSEMEM_ENABLE
select SYS_SUPPORTS_NUMA
+ select SYS_SUPPORTS_SMP
+ select GENERIC_CLOCKEVENTS_BROADCAST if SMP
config CPU_SUBTYPE_SHX3
bool "Support SH-X3 processor"
@@ -648,7 +656,7 @@
int "Maximum number of CPUs (2-32)"
range 2 32
depends on SMP
- default "4" if CPU_SHX3
+ default "4" if CPU_SUBTYPE_SHX3
default "2"
help
This allows you to specify the maximum number of CPUs which this
diff --git a/arch/sh/include/asm/dma-mapping.h b/arch/sh/include/asm/dma-mapping.h
index ea9d4f4..69d56dd 100644
--- a/arch/sh/include/asm/dma-mapping.h
+++ b/arch/sh/include/asm/dma-mapping.h
@@ -97,7 +97,7 @@
dma_unmap_single(dev, dma_address, size, dir);
}
-static inline void dma_sync_single(struct device *dev, dma_addr_t dma_handle,
+static inline void __dma_sync_single(struct device *dev, dma_addr_t dma_handle,
size_t size, enum dma_data_direction dir)
{
#if defined(CONFIG_PCI) && !defined(CONFIG_SH_PCIDMA_NONCOHERENT)
@@ -119,7 +119,7 @@
dma_cache_sync(dev, phys_to_virt(dma_handle) + offset, size, dir);
}
-static inline void dma_sync_sg(struct device *dev, struct scatterlist *sg,
+static inline void __dma_sync_sg(struct device *dev, struct scatterlist *sg,
int nelems, enum dma_data_direction dir)
{
int i;
@@ -137,7 +137,7 @@
dma_addr_t dma_handle, size_t size,
enum dma_data_direction dir)
{
- dma_sync_single(dev, dma_handle, size, dir);
+ __dma_sync_single(dev, dma_handle, size, dir);
debug_dma_sync_single_for_cpu(dev, dma_handle, size, dir);
}
@@ -146,7 +146,7 @@
size_t size,
enum dma_data_direction dir)
{
- dma_sync_single(dev, dma_handle, size, dir);
+ __dma_sync_single(dev, dma_handle, size, dir);
debug_dma_sync_single_for_device(dev, dma_handle, size, dir);
}
@@ -177,7 +177,7 @@
struct scatterlist *sg, int nelems,
enum dma_data_direction dir)
{
- dma_sync_sg(dev, sg, nelems, dir);
+ __dma_sync_sg(dev, sg, nelems, dir);
debug_dma_sync_sg_for_cpu(dev, sg, nelems, dir);
}
@@ -185,7 +185,7 @@
struct scatterlist *sg, int nelems,
enum dma_data_direction dir)
{
- dma_sync_sg(dev, sg, nelems, dir);
+ __dma_sync_sg(dev, sg, nelems, dir);
debug_dma_sync_sg_for_device(dev, sg, nelems, dir);
}
diff --git a/arch/sh/include/asm/system.h b/arch/sh/include/asm/system.h
index a88895e..ab79e1f 100644
--- a/arch/sh/include/asm/system.h
+++ b/arch/sh/include/asm/system.h
@@ -154,6 +154,7 @@
void per_cpu_trap_init(void);
void default_idle(void);
+void cpu_idle_wait(void);
asmlinkage void break_point_trap(void);
diff --git a/arch/sh/kernel/cpu/sh4a/Makefile b/arch/sh/kernel/cpu/sh4a/Makefile
index 96ea09c..ebdd391 100644
--- a/arch/sh/kernel/cpu/sh4a/Makefile
+++ b/arch/sh/kernel/cpu/sh4a/Makefile
@@ -16,7 +16,7 @@
obj-$(CONFIG_CPU_SUBTYPE_SHX3) += setup-shx3.o
# SMP setup
-smp-$(CONFIG_CPU_SUBTYPE_SHX3) := smp-shx3.o
+smp-$(CONFIG_CPU_SHX3) := smp-shx3.o
# Primary on-chip clocks (common)
clock-$(CONFIG_CPU_SUBTYPE_SH7763) := clock-sh7763.o
@@ -38,6 +38,6 @@
pinmux-$(CONFIG_CPU_SUBTYPE_SH7785) := pinmux-sh7785.o
pinmux-$(CONFIG_CPU_SUBTYPE_SH7786) := pinmux-sh7786.o
-obj-y += $(clock-y)
-obj-$(CONFIG_SMP) += $(smp-y)
+obj-y += $(clock-y)
+obj-$(CONFIG_SMP) += $(smp-y)
obj-$(CONFIG_GENERIC_GPIO) += $(pinmux-y)
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c
index 93e0d2c..b700494 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c
@@ -595,9 +595,8 @@
HSPI,
GPIO0, GPIO1,
Thermal,
- INTC0, INTC1, INTC2, INTC3, INTC4, INTC5, INTC6, INTC7,
-
- /* interrupt groups */
+ INTICI0, INTICI1, INTICI2, INTICI3,
+ INTICI4, INTICI5, INTICI6, INTICI7,
};
static struct intc_vect vectors[] __initdata = {
@@ -638,10 +637,12 @@
INTC_VECT(HSPI, 0xe80),
INTC_VECT(GPIO0, 0xea0), INTC_VECT(GPIO1, 0xec0),
INTC_VECT(Thermal, 0xee0),
+ INTC_VECT(INTICI0, 0xf00), INTC_VECT(INTICI1, 0xf20),
+ INTC_VECT(INTICI2, 0xf40), INTC_VECT(INTICI3, 0xf60),
+ INTC_VECT(INTICI4, 0xf80), INTC_VECT(INTICI5, 0xfa0),
+ INTC_VECT(INTICI6, 0xfc0), INTC_VECT(INTICI7, 0xfe0),
};
-/* FIXME: Main CPU support only now */
-#if 1 /* Main CPU */
#define CnINTMSK0 0xfe410030
#define CnINTMSK1 0xfe410040
#define CnINTMSKCLR0 0xfe410050
@@ -654,21 +655,6 @@
#define CnINT2MSKCR1 0xfe410a34
#define CnINT2MSKCR2 0xfe410a38
#define CnINT2MSKCR3 0xfe410a3c
-#else /* Sub CPU */
-#define CnINTMSK0 0xfe410034
-#define CnINTMSK1 0xfe410044
-#define CnINTMSKCLR0 0xfe410054
-#define CnINTMSKCLR1 0xfe410064
-#define CnINT2MSKR0 0xfe410b20
-#define CnINT2MSKR1 0xfe410b24
-#define CnINT2MSKR2 0xfe410b28
-#define CnINT2MSKR3 0xfe410b2c
-#define CnINT2MSKCR0 0xfe410b30
-#define CnINT2MSKCR1 0xfe410b34
-#define CnINT2MSKCR2 0xfe410b38
-#define CnINT2MSKCR3 0xfe410b3c
-#endif
-
#define INTMSK2 0xfe410068
#define INTMSKCLR2 0xfe41006c
@@ -753,6 +739,9 @@
GPIO1, Thermal } },
{ 0xfe41085c, 0, 32, 8, /* INT2PRI23 */ { 0, 0, 0, 0 } },
{ 0xfe410860, 0, 32, 8, /* INT2PRI24 */ { 0, 0, 0, 0 } },
+ { 0xfe410090, 0xfe4100a0, 32, 4, /* CnICIPRI / CnICIPRICLR */
+ { INTICI7, INTICI6, INTICI5, INTICI4,
+ INTICI3, INTICI2, INTICI1, INTICI0 }, INTC_SMP(4, 2) },
};
static DECLARE_INTC_DESC(intc_desc, "sh7786", vectors, NULL,
diff --git a/arch/sh/kernel/idle.c b/arch/sh/kernel/idle.c
index f35ed03..27ff2dc 100644
--- a/arch/sh/kernel/idle.c
+++ b/arch/sh/kernel/idle.c
@@ -1,7 +1,7 @@
/*
* The idle loop for all SuperH platforms.
*
- * Copyright (C) 2002 - 2008 Paul Mundt
+ * Copyright (C) 2002 - 2009 Paul Mundt
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
@@ -15,6 +15,7 @@
#include <linux/preempt.h>
#include <linux/thread_info.h>
#include <linux/irqflags.h>
+#include <linux/smp.h>
#include <asm/pgalloc.h>
#include <asm/system.h>
#include <asm/atomic.h>
@@ -79,3 +80,23 @@
check_pgt_cache();
}
}
+
+static void do_nothing(void *unused)
+{
+}
+
+/*
+ * cpu_idle_wait - Used to ensure that all the CPUs discard old value of
+ * pm_idle and update to new pm_idle value. Required while changing pm_idle
+ * handler on SMP systems.
+ *
+ * Caller must have changed pm_idle to the new value before the call. Old
+ * pm_idle value will not be used by any CPU after the return of this function.
+ */
+void cpu_idle_wait(void)
+{
+ smp_mb();
+ /* kick all the CPUs so that they exit out of pm_idle */
+ smp_call_function(do_nothing, NULL, 1);
+}
+EXPORT_SYMBOL_GPL(cpu_idle_wait);
diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c
index ee8e6bb..fe532ae 100644
--- a/arch/sh/mm/init.c
+++ b/arch/sh/mm/init.c
@@ -70,7 +70,7 @@
}
set_pte(pte, pfn_pte(phys >> PAGE_SHIFT, prot));
- flush_tlb_one(get_asid(), addr);
+ local_flush_tlb_one(get_asid(), addr);
}
/*
@@ -177,10 +177,8 @@
free_area_init_nodes(max_zone_pfns);
-#ifdef CONFIG_SUPERH32
/* Set up the uncached fixmap */
set_fixmap_nocache(FIX_UNCACHED, __pa(&__uncached_start));
-#endif
}
static struct kcore_list kcore_mem, kcore_vmalloc;
diff --git a/arch/sparc/boot/Makefile b/arch/sparc/boot/Makefile
index 96041a8..1ff0fd9 100644
--- a/arch/sparc/boot/Makefile
+++ b/arch/sparc/boot/Makefile
@@ -15,7 +15,7 @@
ifeq ($(CONFIG_SPARC32),y)
quiet_cmd_piggy = PIGGY $@
- cmd_piggy = $(obj)/piggyback_32 $@ $(obj)/System.map $(ROOT_IMG)
+ cmd_piggy = $(obj)/piggyback_32 $@ System.map $(ROOT_IMG)
quiet_cmd_btfix = BTFIX $@
cmd_btfix = $(OBJDUMP) -x vmlinux | $(obj)/btfixupprep > $@
quiet_cmd_sysmap = SYSMAP $(obj)/System.map
@@ -58,7 +58,7 @@
$(obj)/zImage: $(obj)/image
$(call if_changed,strip)
-$(obj)/tftpboot.img: $(obj)/piggyback $(obj)/System.map $(obj)/image FORCE
+$(obj)/tftpboot.img: $(obj)/image $(obj)/piggyback_32 System.map $(ROOT_IMG) FORCE
$(call if_changed,elftoaout)
$(call if_changed,piggy)
@@ -79,7 +79,7 @@
$(call if_changed,strip)
@echo ' kernel: $@ is ready'
-$(obj)/tftpboot.img: vmlinux $(obj)/piggyback_64 System.map $(ROOT_IMG) FORCE
+$(obj)/tftpboot.img: $(obj)/image $(obj)/piggyback_64 System.map $(ROOT_IMG) FORCE
$(call if_changed,elftoaout)
$(call if_changed,piggy)
@echo ' kernel: $@ is ready'
diff --git a/arch/sparc/boot/piggyback_32.c b/arch/sparc/boot/piggyback_32.c
index c9f500c..e8dc9ad 100644
--- a/arch/sparc/boot/piggyback_32.c
+++ b/arch/sparc/boot/piggyback_32.c
@@ -70,7 +70,7 @@
int main(int argc,char **argv)
{
static char aout_magic[] = { 0x01, 0x03, 0x01, 0x07 };
- unsigned char buffer[1024], *q, *r;
+ char buffer[1024], *q, *r;
unsigned int i, j, k, start, end, offset;
FILE *map;
struct stat s;
@@ -84,7 +84,7 @@
while (fgets (buffer, 1024, map)) {
if (!strcmp (buffer + 8, " T start\n") || !strcmp (buffer + 16, " T start\n"))
start = strtoul (buffer, NULL, 16);
- else if (!strcmp (buffer + 8, " A end\n") || !strcmp (buffer + 16, " A end\n"))
+ else if (!strcmp (buffer + 8, " A _end\n") || !strcmp (buffer + 16, " A _end\n"))
end = strtoul (buffer, NULL, 16);
}
fclose (map);
diff --git a/arch/sparc/boot/piggyback_64.c b/arch/sparc/boot/piggyback_64.c
index de364bf..c63fd1b 100644
--- a/arch/sparc/boot/piggyback_64.c
+++ b/arch/sparc/boot/piggyback_64.c
@@ -46,6 +46,7 @@
struct stat s;
int image, tail;
+ start = end = 0;
if (stat (argv[3], &s) < 0) die (argv[3]);
map = fopen (argv[2], "r");
if (!map) die(argv[2]);
diff --git a/arch/sparc/kernel/irq_64.c b/arch/sparc/kernel/irq_64.c
index bd07505..f0ee790 100644
--- a/arch/sparc/kernel/irq_64.c
+++ b/arch/sparc/kernel/irq_64.c
@@ -20,7 +20,6 @@
#include <linux/delay.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
-#include <linux/bootmem.h>
#include <linux/irq.h>
#include <asm/ptrace.h>
@@ -914,25 +913,19 @@
tb->nonresum_qmask);
}
-static void __init alloc_one_mondo(unsigned long *pa_ptr, unsigned long qmask)
+/* Each queue region must be a power of 2 multiple of 64 bytes in
+ * size. The base real address must be aligned to the size of the
+ * region. Thus, an 8KB queue must be 8KB aligned, for example.
+ */
+static void __init alloc_one_queue(unsigned long *pa_ptr, unsigned long qmask)
{
unsigned long size = PAGE_ALIGN(qmask + 1);
- void *p = __alloc_bootmem(size, size, 0);
+ unsigned long order = get_order(size);
+ unsigned long p;
+
+ p = __get_free_pages(GFP_KERNEL, order);
if (!p) {
- prom_printf("SUN4V: Error, cannot allocate mondo queue.\n");
- prom_halt();
- }
-
- *pa_ptr = __pa(p);
-}
-
-static void __init alloc_one_kbuf(unsigned long *pa_ptr, unsigned long qmask)
-{
- unsigned long size = PAGE_ALIGN(qmask + 1);
- void *p = __alloc_bootmem(size, size, 0);
-
- if (!p) {
- prom_printf("SUN4V: Error, cannot allocate kbuf page.\n");
+ prom_printf("SUN4V: Error, cannot allocate queue.\n");
prom_halt();
}
@@ -942,11 +935,11 @@
static void __init init_cpu_send_mondo_info(struct trap_per_cpu *tb)
{
#ifdef CONFIG_SMP
- void *page;
+ unsigned long page;
BUILD_BUG_ON((NR_CPUS * sizeof(u16)) > (PAGE_SIZE - 64));
- page = alloc_bootmem_pages(PAGE_SIZE);
+ page = get_zeroed_page(GFP_KERNEL);
if (!page) {
prom_printf("SUN4V: Error, cannot allocate cpu mondo page.\n");
prom_halt();
@@ -965,13 +958,13 @@
for_each_possible_cpu(cpu) {
struct trap_per_cpu *tb = &trap_block[cpu];
- alloc_one_mondo(&tb->cpu_mondo_pa, tb->cpu_mondo_qmask);
- alloc_one_mondo(&tb->dev_mondo_pa, tb->dev_mondo_qmask);
- alloc_one_mondo(&tb->resum_mondo_pa, tb->resum_qmask);
- alloc_one_kbuf(&tb->resum_kernel_buf_pa, tb->resum_qmask);
- alloc_one_mondo(&tb->nonresum_mondo_pa, tb->nonresum_qmask);
- alloc_one_kbuf(&tb->nonresum_kernel_buf_pa,
- tb->nonresum_qmask);
+ alloc_one_queue(&tb->cpu_mondo_pa, tb->cpu_mondo_qmask);
+ alloc_one_queue(&tb->dev_mondo_pa, tb->dev_mondo_qmask);
+ alloc_one_queue(&tb->resum_mondo_pa, tb->resum_qmask);
+ alloc_one_queue(&tb->resum_kernel_buf_pa, tb->resum_qmask);
+ alloc_one_queue(&tb->nonresum_mondo_pa, tb->nonresum_qmask);
+ alloc_one_queue(&tb->nonresum_kernel_buf_pa,
+ tb->nonresum_qmask);
}
}
@@ -999,7 +992,7 @@
kill_prom_timer();
size = sizeof(struct ino_bucket) * NUM_IVECS;
- ivector_table = alloc_bootmem(size);
+ ivector_table = kzalloc(size, GFP_KERNEL);
if (!ivector_table) {
prom_printf("Fatal error, cannot allocate ivector_table\n");
prom_halt();
diff --git a/arch/um/drivers/slip_kern.c b/arch/um/drivers/slip_kern.c
index 5ec1756..dd2aadc 100644
--- a/arch/um/drivers/slip_kern.c
+++ b/arch/um/drivers/slip_kern.c
@@ -30,7 +30,6 @@
slip_proto_init(&spri->slip);
- dev->init = NULL;
dev->hard_header_len = 0;
dev->header_ops = NULL;
dev->addr_len = 0;
diff --git a/arch/um/drivers/slirp_kern.c b/arch/um/drivers/slirp_kern.c
index f15a6e7..e376284 100644
--- a/arch/um/drivers/slirp_kern.c
+++ b/arch/um/drivers/slirp_kern.c
@@ -32,7 +32,6 @@
slip_proto_init(&spri->slip);
- dev->init = NULL;
dev->hard_header_len = 0;
dev->header_ops = NULL;
dev->addr_len = 0;
diff --git a/arch/um/include/asm/dma-mapping.h b/arch/um/include/asm/dma-mapping.h
index 90fc708..378de4b 100644
--- a/arch/um/include/asm/dma-mapping.h
+++ b/arch/um/include/asm/dma-mapping.h
@@ -79,14 +79,14 @@
}
static inline void
-dma_sync_single(struct device *dev, dma_addr_t dma_handle, size_t size,
+dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size,
enum dma_data_direction direction)
{
BUG();
}
static inline void
-dma_sync_sg(struct device *dev, struct scatterlist *sg, int nelems,
+dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems,
enum dma_data_direction direction)
{
BUG();
diff --git a/arch/x86/include/asm/acpi.h b/arch/x86/include/asm/acpi.h
index 4518dc5..20d1465 100644
--- a/arch/x86/include/asm/acpi.h
+++ b/arch/x86/include/asm/acpi.h
@@ -144,6 +144,7 @@
#else /* !CONFIG_ACPI */
+#define acpi_disabled 1
#define acpi_lapic 0
#define acpi_ioapic 0
static inline void acpi_noirq_set(void) { }
diff --git a/arch/x86/include/asm/pci_x86.h b/arch/x86/include/asm/pci_x86.h
index cb739cc..b399988 100644
--- a/arch/x86/include/asm/pci_x86.h
+++ b/arch/x86/include/asm/pci_x86.h
@@ -25,7 +25,7 @@
#define PCI_BIOS_IRQ_SCAN 0x2000
#define PCI_ASSIGN_ALL_BUSSES 0x4000
#define PCI_CAN_SKIP_ISA_ALIGN 0x8000
-#define PCI_NO_ROOT_CRS 0x10000
+#define PCI_USE__CRS 0x10000
#define PCI_CHECK_ENABLE_AMD_MMCONF 0x20000
#define PCI_HAS_IO_ECS 0x40000
#define PCI_NOASSIGN_ROMS 0x80000
@@ -121,6 +121,9 @@
extern int __init pci_mmcfg_arch_init(void);
extern void __init pci_mmcfg_arch_free(void);
+extern struct acpi_mcfg_allocation *pci_mmcfg_config;
+extern int pci_mmcfg_config_num;
+
/*
* AMD Fam10h CPUs are buggy, and cannot access MMIO config space
* on their northbrige except through the * %eax register. As such, you MUST
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 6310861..6b8ca3a 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -44,11 +44,7 @@
static int __initdata acpi_force = 0;
u32 acpi_rsdt_forced;
-#ifdef CONFIG_ACPI
-int acpi_disabled = 0;
-#else
-int acpi_disabled = 1;
-#endif
+int acpi_disabled;
EXPORT_SYMBOL(acpi_disabled);
#ifdef CONFIG_X86_64
@@ -122,72 +118,6 @@
early_iounmap(map, size);
}
-#ifdef CONFIG_PCI_MMCONFIG
-
-static int acpi_mcfg_64bit_base_addr __initdata = FALSE;
-
-/* The physical address of the MMCONFIG aperture. Set from ACPI tables. */
-struct acpi_mcfg_allocation *pci_mmcfg_config;
-int pci_mmcfg_config_num;
-
-static int __init acpi_mcfg_oem_check(struct acpi_table_mcfg *mcfg)
-{
- if (!strcmp(mcfg->header.oem_id, "SGI"))
- acpi_mcfg_64bit_base_addr = TRUE;
-
- return 0;
-}
-
-int __init acpi_parse_mcfg(struct acpi_table_header *header)
-{
- struct acpi_table_mcfg *mcfg;
- unsigned long i;
- int config_size;
-
- if (!header)
- return -EINVAL;
-
- mcfg = (struct acpi_table_mcfg *)header;
-
- /* how many config structures do we have */
- pci_mmcfg_config_num = 0;
- i = header->length - sizeof(struct acpi_table_mcfg);
- while (i >= sizeof(struct acpi_mcfg_allocation)) {
- ++pci_mmcfg_config_num;
- i -= sizeof(struct acpi_mcfg_allocation);
- };
- if (pci_mmcfg_config_num == 0) {
- printk(KERN_ERR PREFIX "MMCONFIG has no entries\n");
- return -ENODEV;
- }
-
- config_size = pci_mmcfg_config_num * sizeof(*pci_mmcfg_config);
- pci_mmcfg_config = kmalloc(config_size, GFP_KERNEL);
- if (!pci_mmcfg_config) {
- printk(KERN_WARNING PREFIX
- "No memory for MCFG config tables\n");
- return -ENOMEM;
- }
-
- memcpy(pci_mmcfg_config, &mcfg[1], config_size);
-
- acpi_mcfg_oem_check(mcfg);
-
- for (i = 0; i < pci_mmcfg_config_num; ++i) {
- if ((pci_mmcfg_config[i].address > 0xFFFFFFFF) &&
- !acpi_mcfg_64bit_base_addr) {
- printk(KERN_ERR PREFIX
- "MMCONFIG not in low 4GB of memory\n");
- kfree(pci_mmcfg_config);
- pci_mmcfg_config_num = 0;
- return -ENODEV;
- }
- }
-
- return 0;
-}
-#endif /* CONFIG_PCI_MMCONFIG */
-
#ifdef CONFIG_X86_LOCAL_APIC
static int __init acpi_parse_madt(struct acpi_table_header *table)
{
@@ -1519,14 +1449,6 @@
},
{
.callback = force_acpi_ht,
- .ident = "ASUS P4B266",
- .matches = {
- DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
- DMI_MATCH(DMI_BOARD_NAME, "P4B266"),
- },
- },
- {
- .callback = force_acpi_ht,
.ident = "ASUS P2B-DS",
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
diff --git a/arch/x86/kernel/acpi/cstate.c b/arch/x86/kernel/acpi/cstate.c
index bbbe4bb..8c44c23 100644
--- a/arch/x86/kernel/acpi/cstate.c
+++ b/arch/x86/kernel/acpi/cstate.c
@@ -34,12 +34,22 @@
flags->bm_check = 1;
else if (c->x86_vendor == X86_VENDOR_INTEL) {
/*
- * Today all CPUs that support C3 share cache.
- * TBD: This needs to look at cache shared map, once
- * multi-core detection patch makes to the base.
+ * Today all MP CPUs that support C3 share cache.
+ * And caches should not be flushed by software while
+ * entering C3 type state.
*/
flags->bm_check = 1;
}
+
+ /*
+ * On all recent Intel platforms, ARB_DISABLE is a nop.
+ * So, set bm_control to zero to indicate that ARB_DISABLE
+ * is not required while entering C3 type state on
+ * P4, Core and beyond CPUs
+ */
+ if (c->x86_vendor == X86_VENDOR_INTEL &&
+ (c->x86 > 0x6 || (c->x86 == 6 && c->x86_model >= 14)))
+ flags->bm_control = 0;
}
EXPORT_SYMBOL(acpi_processor_power_init_bm_check);
diff --git a/arch/x86/kernel/acpi/processor.c b/arch/x86/kernel/acpi/processor.c
index 7c074ee..d296f4a 100644
--- a/arch/x86/kernel/acpi/processor.c
+++ b/arch/x86/kernel/acpi/processor.c
@@ -72,6 +72,7 @@
return;
}
+
/* Initialize _PDC data based on the CPU vendor */
void arch_acpi_processor_init_pdc(struct acpi_processor *pr)
{
@@ -85,3 +86,15 @@
}
EXPORT_SYMBOL(arch_acpi_processor_init_pdc);
+
+void arch_acpi_processor_cleanup_pdc(struct acpi_processor *pr)
+{
+ if (pr->pdc) {
+ kfree(pr->pdc->pointer->buffer.pointer);
+ kfree(pr->pdc->pointer);
+ kfree(pr->pdc);
+ pr->pdc = NULL;
+ }
+}
+
+EXPORT_SYMBOL(arch_acpi_processor_cleanup_pdc);
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index b7a7920..4d0216f 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -1414,6 +1414,9 @@
irte.vector = vector;
irte.dest_id = IRTE_DEST(destination);
+ /* Set source-id of interrupt request */
+ set_ioapic_sid(&irte, apic_id);
+
modify_irte(irq, &irte);
ir_entry->index2 = (index >> 15) & 0x1;
@@ -3290,6 +3293,9 @@
irte.vector = cfg->vector;
irte.dest_id = IRTE_DEST(dest);
+ /* Set source-id of interrupt request */
+ set_msi_sid(&irte, pdev);
+
modify_irte(irq, &irte);
msg->address_hi = MSI_ADDR_BASE_HI;
diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c
index 16c3fda..b26626d 100644
--- a/arch/x86/pci/acpi.c
+++ b/arch/x86/pci/acpi.c
@@ -238,7 +238,7 @@
#endif
}
- if (bus && !(pci_probe & PCI_NO_ROOT_CRS))
+ if (bus && (pci_probe & PCI_USE__CRS))
get_current_resources(device, busnum, domain, bus);
return bus;
}
diff --git a/arch/x86/pci/amd_bus.c b/arch/x86/pci/amd_bus.c
index 2255f88..f893d6a 100644
--- a/arch/x86/pci/amd_bus.c
+++ b/arch/x86/pci/amd_bus.c
@@ -101,7 +101,7 @@
struct pci_root_info *info;
/* don't go for it if _CRS is used */
- if (!(pci_probe & PCI_NO_ROOT_CRS))
+ if (pci_probe & PCI_USE__CRS)
return;
/* if only one root bus, don't need to anything */
diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c
index 4740119..2202b62 100644
--- a/arch/x86/pci/common.c
+++ b/arch/x86/pci/common.c
@@ -515,8 +515,8 @@
} else if (!strcmp(str, "assign-busses")) {
pci_probe |= PCI_ASSIGN_ALL_BUSSES;
return NULL;
- } else if (!strcmp(str, "nocrs")) {
- pci_probe |= PCI_NO_ROOT_CRS;
+ } else if (!strcmp(str, "use_crs")) {
+ pci_probe |= PCI_USE__CRS;
return NULL;
} else if (!strcmp(str, "earlydump")) {
pci_early_dump_regs = 1;
diff --git a/arch/x86/pci/mmconfig-shared.c b/arch/x86/pci/mmconfig-shared.c
index 8766b0e..712443e 100644
--- a/arch/x86/pci/mmconfig-shared.c
+++ b/arch/x86/pci/mmconfig-shared.c
@@ -523,6 +523,69 @@
static int __initdata known_bridge;
+static int acpi_mcfg_64bit_base_addr __initdata = FALSE;
+
+/* The physical address of the MMCONFIG aperture. Set from ACPI tables. */
+struct acpi_mcfg_allocation *pci_mmcfg_config;
+int pci_mmcfg_config_num;
+
+static int __init acpi_mcfg_oem_check(struct acpi_table_mcfg *mcfg)
+{
+ if (!strcmp(mcfg->header.oem_id, "SGI"))
+ acpi_mcfg_64bit_base_addr = TRUE;
+
+ return 0;
+}
+
+static int __init pci_parse_mcfg(struct acpi_table_header *header)
+{
+ struct acpi_table_mcfg *mcfg;
+ unsigned long i;
+ int config_size;
+
+ if (!header)
+ return -EINVAL;
+
+ mcfg = (struct acpi_table_mcfg *)header;
+
+ /* how many config structures do we have */
+ pci_mmcfg_config_num = 0;
+ i = header->length - sizeof(struct acpi_table_mcfg);
+ while (i >= sizeof(struct acpi_mcfg_allocation)) {
+ ++pci_mmcfg_config_num;
+ i -= sizeof(struct acpi_mcfg_allocation);
+ };
+ if (pci_mmcfg_config_num == 0) {
+ printk(KERN_ERR PREFIX "MMCONFIG has no entries\n");
+ return -ENODEV;
+ }
+
+ config_size = pci_mmcfg_config_num * sizeof(*pci_mmcfg_config);
+ pci_mmcfg_config = kmalloc(config_size, GFP_KERNEL);
+ if (!pci_mmcfg_config) {
+ printk(KERN_WARNING PREFIX
+ "No memory for MCFG config tables\n");
+ return -ENOMEM;
+ }
+
+ memcpy(pci_mmcfg_config, &mcfg[1], config_size);
+
+ acpi_mcfg_oem_check(mcfg);
+
+ for (i = 0; i < pci_mmcfg_config_num; ++i) {
+ if ((pci_mmcfg_config[i].address > 0xFFFFFFFF) &&
+ !acpi_mcfg_64bit_base_addr) {
+ printk(KERN_ERR PREFIX
+ "MMCONFIG not in low 4GB of memory\n");
+ kfree(pci_mmcfg_config);
+ pci_mmcfg_config_num = 0;
+ return -ENODEV;
+ }
+ }
+
+ return 0;
+}
+
static void __init __pci_mmcfg_init(int early)
{
/* MMCONFIG disabled */
@@ -543,7 +606,7 @@
}
if (!known_bridge)
- acpi_table_parse(ACPI_SIG_MCFG, acpi_parse_mcfg);
+ acpi_table_parse(ACPI_SIG_MCFG, pci_parse_mcfg);
pci_mmcfg_reject_broken(early);
diff --git a/block/bsg.c b/block/bsg.c
index 54106f0..e7d4752 100644
--- a/block/bsg.c
+++ b/block/bsg.c
@@ -315,7 +315,6 @@
blk_put_request(rq);
if (next_rq) {
blk_rq_unmap_user(next_rq->bio);
- next_rq->bio = NULL;
blk_put_request(next_rq);
}
return ERR_PTR(ret);
@@ -449,7 +448,6 @@
hdr->dout_resid = rq->resid_len;
hdr->din_resid = rq->next_rq->resid_len;
blk_rq_unmap_user(bidi_bio);
- rq->next_rq->bio = NULL;
blk_put_request(rq->next_rq);
} else if (rq_data_dir(rq) == READ)
hdr->din_resid = rq->resid_len;
@@ -468,7 +466,6 @@
blk_rq_unmap_user(bio);
if (rq->cmd != rq->__cmd)
kfree(rq->cmd);
- rq->bio = NULL;
blk_put_request(rq);
return ret;
diff --git a/drivers/acpi/ac.c b/drivers/acpi/ac.c
index 88e42ab..0df8fcb 100644
--- a/drivers/acpi/ac.c
+++ b/drivers/acpi/ac.c
@@ -61,6 +61,7 @@
static int acpi_ac_add(struct acpi_device *device);
static int acpi_ac_remove(struct acpi_device *device, int type);
static int acpi_ac_resume(struct acpi_device *device);
+static void acpi_ac_notify(struct acpi_device *device, u32 event);
static const struct acpi_device_id ac_device_ids[] = {
{"ACPI0003", 0},
@@ -72,10 +73,12 @@
.name = "ac",
.class = ACPI_AC_CLASS,
.ids = ac_device_ids,
+ .flags = ACPI_DRIVER_ALL_NOTIFY_EVENTS,
.ops = {
.add = acpi_ac_add,
.remove = acpi_ac_remove,
.resume = acpi_ac_resume,
+ .notify = acpi_ac_notify,
},
};
@@ -220,16 +223,14 @@
Driver Model
-------------------------------------------------------------------------- */
-static void acpi_ac_notify(acpi_handle handle, u32 event, void *data)
+static void acpi_ac_notify(struct acpi_device *device, u32 event)
{
- struct acpi_ac *ac = data;
- struct acpi_device *device = NULL;
+ struct acpi_ac *ac = acpi_driver_data(device);
if (!ac)
return;
- device = ac->device;
switch (event) {
default:
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
@@ -253,7 +254,6 @@
static int acpi_ac_add(struct acpi_device *device)
{
int result = 0;
- acpi_status status = AE_OK;
struct acpi_ac *ac = NULL;
@@ -286,13 +286,6 @@
ac->charger.get_property = get_ac_property;
power_supply_register(&ac->device->dev, &ac->charger);
#endif
- status = acpi_install_notify_handler(device->handle,
- ACPI_ALL_NOTIFY, acpi_ac_notify,
- ac);
- if (ACPI_FAILURE(status)) {
- result = -ENODEV;
- goto end;
- }
printk(KERN_INFO PREFIX "%s [%s] (%s)\n",
acpi_device_name(device), acpi_device_bid(device),
@@ -328,7 +321,6 @@
static int acpi_ac_remove(struct acpi_device *device, int type)
{
- acpi_status status = AE_OK;
struct acpi_ac *ac = NULL;
@@ -337,8 +329,6 @@
ac = acpi_driver_data(device);
- status = acpi_remove_notify_handler(device->handle,
- ACPI_ALL_NOTIFY, acpi_ac_notify);
#ifdef CONFIG_ACPI_SYSFS_POWER
if (ac->charger.dev)
power_supply_unregister(&ac->charger);
diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c
index b0de631..58b4517 100644
--- a/drivers/acpi/battery.c
+++ b/drivers/acpi/battery.c
@@ -796,13 +796,12 @@
Driver Interface
-------------------------------------------------------------------------- */
-static void acpi_battery_notify(acpi_handle handle, u32 event, void *data)
+static void acpi_battery_notify(struct acpi_device *device, u32 event)
{
- struct acpi_battery *battery = data;
- struct acpi_device *device;
+ struct acpi_battery *battery = acpi_driver_data(device);
+
if (!battery)
return;
- device = battery->device;
acpi_battery_update(battery);
acpi_bus_generate_proc_event(device, event,
acpi_battery_present(battery));
@@ -819,7 +818,6 @@
static int acpi_battery_add(struct acpi_device *device)
{
int result = 0;
- acpi_status status = 0;
struct acpi_battery *battery = NULL;
if (!device)
return -EINVAL;
@@ -834,22 +832,12 @@
acpi_battery_update(battery);
#ifdef CONFIG_ACPI_PROCFS_POWER
result = acpi_battery_add_fs(device);
- if (result)
- goto end;
#endif
- status = acpi_install_notify_handler(device->handle,
- ACPI_ALL_NOTIFY,
- acpi_battery_notify, battery);
- if (ACPI_FAILURE(status)) {
- ACPI_EXCEPTION((AE_INFO, status, "Installing notify handler"));
- result = -ENODEV;
- goto end;
- }
- printk(KERN_INFO PREFIX "%s Slot [%s] (battery %s)\n",
- ACPI_BATTERY_DEVICE_NAME, acpi_device_bid(device),
- device->status.battery_present ? "present" : "absent");
- end:
- if (result) {
+ if (!result) {
+ printk(KERN_INFO PREFIX "%s Slot [%s] (battery %s)\n",
+ ACPI_BATTERY_DEVICE_NAME, acpi_device_bid(device),
+ device->status.battery_present ? "present" : "absent");
+ } else {
#ifdef CONFIG_ACPI_PROCFS_POWER
acpi_battery_remove_fs(device);
#endif
@@ -860,15 +848,11 @@
static int acpi_battery_remove(struct acpi_device *device, int type)
{
- acpi_status status = 0;
struct acpi_battery *battery = NULL;
if (!device || !acpi_driver_data(device))
return -EINVAL;
battery = acpi_driver_data(device);
- status = acpi_remove_notify_handler(device->handle,
- ACPI_ALL_NOTIFY,
- acpi_battery_notify);
#ifdef CONFIG_ACPI_PROCFS_POWER
acpi_battery_remove_fs(device);
#endif
@@ -896,10 +880,12 @@
.name = "battery",
.class = ACPI_BATTERY_CLASS,
.ids = battery_device_ids,
+ .flags = ACPI_DRIVER_ALL_NOTIFY_EVENTS,
.ops = {
.add = acpi_battery_add,
.resume = acpi_battery_resume,
.remove = acpi_battery_remove,
+ .notify = acpi_battery_notify,
},
};
diff --git a/drivers/acpi/blacklist.c b/drivers/acpi/blacklist.c
index 09c69806..f6baa77 100644
--- a/drivers/acpi/blacklist.c
+++ b/drivers/acpi/blacklist.c
@@ -192,6 +192,22 @@
DMI_MATCH(DMI_PRODUCT_NAME, "ESPRIMO Mobile V5505"),
},
},
+ {
+ .callback = dmi_disable_osi_vista,
+ .ident = "Sony VGN-NS10J_S",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "VGN-NS10J_S"),
+ },
+ },
+ {
+ .callback = dmi_disable_osi_vista,
+ .ident = "Sony VGN-SR290J",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Sony VGN-SR290J"),
+ },
+ },
/*
* BIOS invocation of _OSI(Linux) is almost always a BIOS bug.
diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
index ae862f179..2876fc7 100644
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -450,18 +450,16 @@
Notification Handling
-------------------------------------------------------------------------- */
-static int
-acpi_bus_check_device(struct acpi_device *device, int *status_changed)
+static void acpi_bus_check_device(acpi_handle handle)
{
- acpi_status status = 0;
+ struct acpi_device *device;
+ acpi_status status;
struct acpi_device_status old_status;
-
+ if (acpi_bus_get_device(handle, &device))
+ return;
if (!device)
- return -EINVAL;
-
- if (status_changed)
- *status_changed = 0;
+ return;
old_status = device->status;
@@ -471,22 +469,15 @@
*/
if (device->parent && !device->parent->status.present) {
device->status = device->parent->status;
- if (STRUCT_TO_INT(old_status) != STRUCT_TO_INT(device->status)) {
- if (status_changed)
- *status_changed = 1;
- }
- return 0;
+ return;
}
status = acpi_bus_get_status(device);
if (ACPI_FAILURE(status))
- return -ENODEV;
+ return;
if (STRUCT_TO_INT(old_status) == STRUCT_TO_INT(device->status))
- return 0;
-
- if (status_changed)
- *status_changed = 1;
+ return;
/*
* Device Insertion/Removal
@@ -498,33 +489,17 @@
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device removal detected\n"));
/* TBD: Handle device removal */
}
-
- return 0;
}
-static int acpi_bus_check_scope(struct acpi_device *device)
+static void acpi_bus_check_scope(acpi_handle handle)
{
- int result = 0;
- int status_changed = 0;
-
-
- if (!device)
- return -EINVAL;
-
/* Status Change? */
- result = acpi_bus_check_device(device, &status_changed);
- if (result)
- return result;
-
- if (!status_changed)
- return 0;
+ acpi_bus_check_device(handle);
/*
* TBD: Enumerate child devices within this device's scope and
* run acpi_bus_check_device()'s on them.
*/
-
- return 0;
}
static BLOCKING_NOTIFIER_HEAD(acpi_bus_notify_list);
@@ -547,22 +522,19 @@
*/
static void acpi_bus_notify(acpi_handle handle, u32 type, void *data)
{
- int result = 0;
struct acpi_device *device = NULL;
+ struct acpi_driver *driver;
+
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Notification %#02x to handle %p\n",
+ type, handle));
blocking_notifier_call_chain(&acpi_bus_notify_list,
type, (void *)handle);
- if (acpi_bus_get_device(handle, &device))
- return;
-
switch (type) {
case ACPI_NOTIFY_BUS_CHECK:
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Received BUS CHECK notification for device [%s]\n",
- device->pnp.bus_id));
- result = acpi_bus_check_scope(device);
+ acpi_bus_check_scope(handle);
/*
* TBD: We'll need to outsource certain events to non-ACPI
* drivers via the device manager (device.c).
@@ -570,10 +542,7 @@
break;
case ACPI_NOTIFY_DEVICE_CHECK:
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Received DEVICE CHECK notification for device [%s]\n",
- device->pnp.bus_id));
- result = acpi_bus_check_device(device, NULL);
+ acpi_bus_check_device(handle);
/*
* TBD: We'll need to outsource certain events to non-ACPI
* drivers via the device manager (device.c).
@@ -581,44 +550,26 @@
break;
case ACPI_NOTIFY_DEVICE_WAKE:
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Received DEVICE WAKE notification for device [%s]\n",
- device->pnp.bus_id));
/* TBD */
break;
case ACPI_NOTIFY_EJECT_REQUEST:
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Received EJECT REQUEST notification for device [%s]\n",
- device->pnp.bus_id));
/* TBD */
break;
case ACPI_NOTIFY_DEVICE_CHECK_LIGHT:
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Received DEVICE CHECK LIGHT notification for device [%s]\n",
- device->pnp.bus_id));
/* TBD: Exactly what does 'light' mean? */
break;
case ACPI_NOTIFY_FREQUENCY_MISMATCH:
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Received FREQUENCY MISMATCH notification for device [%s]\n",
- device->pnp.bus_id));
/* TBD */
break;
case ACPI_NOTIFY_BUS_MODE_MISMATCH:
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Received BUS MODE MISMATCH notification for device [%s]\n",
- device->pnp.bus_id));
/* TBD */
break;
case ACPI_NOTIFY_POWER_FAULT:
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Received POWER FAULT notification for device [%s]\n",
- device->pnp.bus_id));
/* TBD */
break;
@@ -629,7 +580,13 @@
break;
}
- return;
+ acpi_bus_get_device(handle, &device);
+ if (device) {
+ driver = device->driver;
+ if (driver && driver->ops.notify &&
+ (driver->flags & ACPI_DRIVER_ALL_NOTIFY_EVENTS))
+ driver->ops.notify(device, type);
+ }
}
/* --------------------------------------------------------------------------
diff --git a/drivers/acpi/glue.c b/drivers/acpi/glue.c
index 8bd2c2a..a8a5c29 100644
--- a/drivers/acpi/glue.c
+++ b/drivers/acpi/glue.c
@@ -140,46 +140,6 @@
EXPORT_SYMBOL(acpi_get_physical_device);
-/* ToDo: When a PCI bridge is found, return the PCI device behind the bridge
- * This should work in general, but did not on a Lenovo T61 for the
- * graphics card. But this must be fixed when the PCI device is
- * bound and the kernel device struct is attached to the acpi device
- * Note: A success call will increase reference count by one
- * Do call put_device(dev) on the returned device then
- */
-struct device *acpi_get_physical_pci_device(acpi_handle handle)
-{
- struct device *dev;
- long long device_id;
- acpi_status status;
-
- status =
- acpi_evaluate_integer(handle, "_ADR", NULL, &device_id);
-
- if (ACPI_FAILURE(status))
- return NULL;
-
- /* We need to attempt to determine whether the _ADR refers to a
- PCI device or not. There's no terribly good way to do this,
- so the best we can hope for is to assume that there'll never
- be a device in the host bridge */
- if (device_id >= 0x10000) {
- /* It looks like a PCI device. Does it exist? */
- dev = acpi_get_physical_device(handle);
- } else {
- /* It doesn't look like a PCI device. Does its parent
- exist? */
- acpi_handle phandle;
- if (acpi_get_parent(handle, &phandle))
- return NULL;
- dev = acpi_get_physical_device(phandle);
- }
- if (!dev)
- return NULL;
- return dev;
-}
-EXPORT_SYMBOL(acpi_get_physical_pci_device);
-
static int acpi_bind_one(struct device *dev, acpi_handle handle)
{
struct acpi_device *acpi_dev;
diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c
index d916bea..7167071 100644
--- a/drivers/acpi/osl.c
+++ b/drivers/acpi/osl.c
@@ -79,6 +79,7 @@
static void *acpi_irq_context;
static struct workqueue_struct *kacpid_wq;
static struct workqueue_struct *kacpi_notify_wq;
+static struct workqueue_struct *kacpi_hotplug_wq;
struct acpi_res_list {
resource_size_t start;
@@ -192,8 +193,10 @@
{
kacpid_wq = create_singlethread_workqueue("kacpid");
kacpi_notify_wq = create_singlethread_workqueue("kacpi_notify");
+ kacpi_hotplug_wq = create_singlethread_workqueue("kacpi_hotplug");
BUG_ON(!kacpid_wq);
BUG_ON(!kacpi_notify_wq);
+ BUG_ON(!kacpi_hotplug_wq);
return AE_OK;
}
@@ -206,6 +209,7 @@
destroy_workqueue(kacpid_wq);
destroy_workqueue(kacpi_notify_wq);
+ destroy_workqueue(kacpi_hotplug_wq);
return AE_OK;
}
@@ -716,6 +720,7 @@
acpi_status status = AE_OK;
struct acpi_os_dpc *dpc;
struct workqueue_struct *queue;
+ work_func_t func;
int ret;
ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
"Scheduling function [%p(%p)] for deferred execution.\n",
@@ -740,15 +745,17 @@
dpc->function = function;
dpc->context = context;
- if (!hp) {
- INIT_WORK(&dpc->work, acpi_os_execute_deferred);
- queue = (type == OSL_NOTIFY_HANDLER) ?
- kacpi_notify_wq : kacpid_wq;
- ret = queue_work(queue, &dpc->work);
- } else {
- INIT_WORK(&dpc->work, acpi_os_execute_hp_deferred);
- ret = schedule_work(&dpc->work);
- }
+ /*
+ * We can't run hotplug code in keventd_wq/kacpid_wq/kacpid_notify_wq
+ * because the hotplug code may call driver .remove() functions,
+ * which invoke flush_scheduled_work/acpi_os_wait_events_complete
+ * to flush these workqueues.
+ */
+ queue = hp ? kacpi_hotplug_wq :
+ (type == OSL_NOTIFY_HANDLER ? kacpi_notify_wq : kacpid_wq);
+ func = hp ? acpi_os_execute_hp_deferred : acpi_os_execute_deferred;
+ INIT_WORK(&dpc->work, func);
+ ret = queue_work(queue, &dpc->work);
if (!ret) {
printk(KERN_ERR PREFIX
diff --git a/drivers/acpi/pci_bind.c b/drivers/acpi/pci_bind.c
index bc46de3..a5a77b7 100644
--- a/drivers/acpi/pci_bind.c
+++ b/drivers/acpi/pci_bind.c
@@ -24,12 +24,7 @@
*/
#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
#include <linux/types.h>
-#include <linux/proc_fs.h>
-#include <linux/spinlock.h>
-#include <linux/pm.h>
#include <linux/pci.h>
#include <linux/acpi.h>
#include <acpi/acpi_bus.h>
@@ -38,310 +33,76 @@
#define _COMPONENT ACPI_PCI_COMPONENT
ACPI_MODULE_NAME("pci_bind");
-struct acpi_pci_data {
- struct acpi_pci_id id;
+static int acpi_pci_unbind(struct acpi_device *device)
+{
+ struct pci_dev *dev;
+
+ dev = acpi_get_pci_dev(device->handle);
+ if (!dev || !dev->subordinate)
+ goto out;
+
+ acpi_pci_irq_del_prt(dev->subordinate);
+
+ device->ops.bind = NULL;
+ device->ops.unbind = NULL;
+
+out:
+ pci_dev_put(dev);
+ return 0;
+}
+
+static int acpi_pci_bind(struct acpi_device *device)
+{
+ acpi_status status;
+ acpi_handle handle;
struct pci_bus *bus;
struct pci_dev *dev;
-};
-static int acpi_pci_unbind(struct acpi_device *device);
-
-static void acpi_pci_data_handler(acpi_handle handle, u32 function,
- void *context)
-{
-
- /* TBD: Anything we need to do here? */
-
- return;
-}
-
-/**
- * acpi_get_pci_id
- * ------------------
- * This function is used by the ACPI Interpreter (a.k.a. Core Subsystem)
- * to resolve PCI information for ACPI-PCI devices defined in the namespace.
- * This typically occurs when resolving PCI operation region information.
- */
-acpi_status acpi_get_pci_id(acpi_handle handle, struct acpi_pci_id *id)
-{
- int result = 0;
- acpi_status status = AE_OK;
- struct acpi_device *device = NULL;
- struct acpi_pci_data *data = NULL;
-
-
- if (!id)
- return AE_BAD_PARAMETER;
-
- result = acpi_bus_get_device(handle, &device);
- if (result) {
- printk(KERN_ERR PREFIX
- "Invalid ACPI Bus context for device %s\n",
- acpi_device_bid(device));
- return AE_NOT_EXIST;
- }
-
- status = acpi_get_data(handle, acpi_pci_data_handler, (void **)&data);
- if (ACPI_FAILURE(status) || !data) {
- ACPI_EXCEPTION((AE_INFO, status,
- "Invalid ACPI-PCI context for device %s",
- acpi_device_bid(device)));
- return status;
- }
-
- *id = data->id;
+ dev = acpi_get_pci_dev(device->handle);
+ if (!dev)
+ return 0;
/*
- id->segment = data->id.segment;
- id->bus = data->id.bus;
- id->device = data->id.device;
- id->function = data->id.function;
+ * Install the 'bind' function to facilitate callbacks for
+ * children of the P2P bridge.
*/
-
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Device %s has PCI address %04x:%02x:%02x.%d\n",
- acpi_device_bid(device), id->segment, id->bus,
- id->device, id->function));
-
- return AE_OK;
-}
-
-EXPORT_SYMBOL(acpi_get_pci_id);
-
-int acpi_pci_bind(struct acpi_device *device)
-{
- int result = 0;
- acpi_status status;
- struct acpi_pci_data *data;
- struct acpi_pci_data *pdata;
- struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
- acpi_handle handle;
-
- if (!device || !device->parent)
- return -EINVAL;
-
- data = kzalloc(sizeof(struct acpi_pci_data), GFP_KERNEL);
- if (!data)
- return -ENOMEM;
-
- status = acpi_get_name(device->handle, ACPI_FULL_PATHNAME, &buffer);
- if (ACPI_FAILURE(status)) {
- kfree(data);
- return -ENODEV;
- }
-
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Binding PCI device [%s]...\n",
- (char *)buffer.pointer));
-
- /*
- * Segment & Bus
- * -------------
- * These are obtained via the parent device's ACPI-PCI context.
- */
- status = acpi_get_data(device->parent->handle, acpi_pci_data_handler,
- (void **)&pdata);
- if (ACPI_FAILURE(status) || !pdata || !pdata->bus) {
- ACPI_EXCEPTION((AE_INFO, status,
- "Invalid ACPI-PCI context for parent device %s",
- acpi_device_bid(device->parent)));
- result = -ENODEV;
- goto end;
- }
- data->id.segment = pdata->id.segment;
- data->id.bus = pdata->bus->number;
-
- /*
- * Device & Function
- * -----------------
- * These are simply obtained from the device's _ADR method. Note
- * that a value of zero is valid.
- */
- data->id.device = device->pnp.bus_address >> 16;
- data->id.function = device->pnp.bus_address & 0xFFFF;
-
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "...to %04x:%02x:%02x.%d\n",
- data->id.segment, data->id.bus, data->id.device,
- data->id.function));
-
- /*
- * TBD: Support slot devices (e.g. function=0xFFFF).
- */
-
- /*
- * Locate PCI Device
- * -----------------
- * Locate matching device in PCI namespace. If it doesn't exist
- * this typically means that the device isn't currently inserted
- * (e.g. docking station, port replicator, etc.).
- */
- data->dev = pci_get_slot(pdata->bus,
- PCI_DEVFN(data->id.device, data->id.function));
- if (!data->dev) {
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Device %04x:%02x:%02x.%d not present in PCI namespace\n",
- data->id.segment, data->id.bus,
- data->id.device, data->id.function));
- result = -ENODEV;
- goto end;
- }
- if (!data->dev->bus) {
- printk(KERN_ERR PREFIX
- "Device %04x:%02x:%02x.%d has invalid 'bus' field\n",
- data->id.segment, data->id.bus,
- data->id.device, data->id.function);
- result = -ENODEV;
- goto end;
- }
-
- /*
- * PCI Bridge?
- * -----------
- * If so, set the 'bus' field and install the 'bind' function to
- * facilitate callbacks for all of its children.
- */
- if (data->dev->subordinate) {
+ if (dev->subordinate) {
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Device %04x:%02x:%02x.%d is a PCI bridge\n",
- data->id.segment, data->id.bus,
- data->id.device, data->id.function));
- data->bus = data->dev->subordinate;
+ pci_domain_nr(dev->bus), dev->bus->number,
+ PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn)));
device->ops.bind = acpi_pci_bind;
device->ops.unbind = acpi_pci_unbind;
}
/*
- * Attach ACPI-PCI Context
- * -----------------------
- * Thus binding the ACPI and PCI devices.
- */
- status = acpi_attach_data(device->handle, acpi_pci_data_handler, data);
- if (ACPI_FAILURE(status)) {
- ACPI_EXCEPTION((AE_INFO, status,
- "Unable to attach ACPI-PCI context to device %s",
- acpi_device_bid(device)));
- result = -ENODEV;
- goto end;
- }
-
- /*
- * PCI Routing Table
- * -----------------
- * Evaluate and parse _PRT, if exists. This code is independent of
- * PCI bridges (above) to allow parsing of _PRT objects within the
- * scope of non-bridge devices. Note that _PRTs within the scope of
- * a PCI bridge assume the bridge's subordinate bus number.
+ * Evaluate and parse _PRT, if exists. This code allows parsing of
+ * _PRT objects within the scope of non-bridge devices. Note that
+ * _PRTs within the scope of a PCI bridge assume the bridge's
+ * subordinate bus number.
*
* TBD: Can _PRTs exist within the scope of non-bridge PCI devices?
*/
status = acpi_get_handle(device->handle, METHOD_NAME__PRT, &handle);
- if (ACPI_SUCCESS(status)) {
- if (data->bus) /* PCI-PCI bridge */
- acpi_pci_irq_add_prt(device->handle, data->id.segment,
- data->bus->number);
- else /* non-bridge PCI device */
- acpi_pci_irq_add_prt(device->handle, data->id.segment,
- data->id.bus);
- }
-
- end:
- kfree(buffer.pointer);
- if (result) {
- pci_dev_put(data->dev);
- kfree(data);
- }
- return result;
-}
-
-static int acpi_pci_unbind(struct acpi_device *device)
-{
- int result = 0;
- acpi_status status;
- struct acpi_pci_data *data;
- struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
-
-
- if (!device || !device->parent)
- return -EINVAL;
-
- status = acpi_get_name(device->handle, ACPI_FULL_PATHNAME, &buffer);
if (ACPI_FAILURE(status))
- return -ENODEV;
+ goto out;
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Unbinding PCI device [%s]...\n",
- (char *) buffer.pointer));
- kfree(buffer.pointer);
+ if (dev->subordinate)
+ bus = dev->subordinate;
+ else
+ bus = dev->bus;
- status =
- acpi_get_data(device->handle, acpi_pci_data_handler,
- (void **)&data);
- if (ACPI_FAILURE(status)) {
- result = -ENODEV;
- goto end;
- }
+ acpi_pci_irq_add_prt(device->handle, bus);
- status = acpi_detach_data(device->handle, acpi_pci_data_handler);
- if (ACPI_FAILURE(status)) {
- ACPI_EXCEPTION((AE_INFO, status,
- "Unable to detach data from device %s",
- acpi_device_bid(device)));
- result = -ENODEV;
- goto end;
- }
- if (data->dev->subordinate) {
- acpi_pci_irq_del_prt(data->id.segment, data->bus->number);
- }
- pci_dev_put(data->dev);
- kfree(data);
-
- end:
- return result;
+out:
+ pci_dev_put(dev);
+ return 0;
}
-int
-acpi_pci_bind_root(struct acpi_device *device,
- struct acpi_pci_id *id, struct pci_bus *bus)
+int acpi_pci_bind_root(struct acpi_device *device)
{
- int result = 0;
- acpi_status status;
- struct acpi_pci_data *data = NULL;
- struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
-
- if (!device || !id || !bus) {
- return -EINVAL;
- }
-
- data = kzalloc(sizeof(struct acpi_pci_data), GFP_KERNEL);
- if (!data)
- return -ENOMEM;
-
- data->id = *id;
- data->bus = bus;
device->ops.bind = acpi_pci_bind;
device->ops.unbind = acpi_pci_unbind;
- status = acpi_get_name(device->handle, ACPI_FULL_PATHNAME, &buffer);
- if (ACPI_FAILURE(status)) {
- kfree (data);
- return -ENODEV;
- }
-
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Binding PCI root bridge [%s] to "
- "%04x:%02x\n", (char *)buffer.pointer,
- id->segment, id->bus));
-
- status = acpi_attach_data(device->handle, acpi_pci_data_handler, data);
- if (ACPI_FAILURE(status)) {
- ACPI_EXCEPTION((AE_INFO, status,
- "Unable to attach ACPI-PCI context to device %s",
- (char *)buffer.pointer));
- result = -ENODEV;
- goto end;
- }
-
- end:
- kfree(buffer.pointer);
- if (result != 0)
- kfree(data);
-
- return result;
+ return 0;
}
diff --git a/drivers/acpi/pci_irq.c b/drivers/acpi/pci_irq.c
index 2faa9e2..b794eb8 100644
--- a/drivers/acpi/pci_irq.c
+++ b/drivers/acpi/pci_irq.c
@@ -182,7 +182,7 @@
}
}
-static int acpi_pci_irq_add_entry(acpi_handle handle, int segment, int bus,
+static int acpi_pci_irq_add_entry(acpi_handle handle, struct pci_bus *bus,
struct acpi_pci_routing_table *prt)
{
struct acpi_prt_entry *entry;
@@ -196,8 +196,8 @@
* 1=INTA, 2=INTB. We use the PCI encoding throughout, so convert
* it here.
*/
- entry->id.segment = segment;
- entry->id.bus = bus;
+ entry->id.segment = pci_domain_nr(bus);
+ entry->id.bus = bus->number;
entry->id.device = (prt->address >> 16) & 0xFFFF;
entry->pin = prt->pin + 1;
@@ -242,7 +242,7 @@
return 0;
}
-int acpi_pci_irq_add_prt(acpi_handle handle, int segment, int bus)
+int acpi_pci_irq_add_prt(acpi_handle handle, struct pci_bus *bus)
{
acpi_status status;
struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
@@ -271,7 +271,7 @@
entry = buffer.pointer;
while (entry && (entry->length > 0)) {
- acpi_pci_irq_add_entry(handle, segment, bus, entry);
+ acpi_pci_irq_add_entry(handle, bus, entry);
entry = (struct acpi_pci_routing_table *)
((unsigned long)entry + entry->length);
}
@@ -280,16 +280,17 @@
return 0;
}
-void acpi_pci_irq_del_prt(int segment, int bus)
+void acpi_pci_irq_del_prt(struct pci_bus *bus)
{
struct acpi_prt_entry *entry, *tmp;
printk(KERN_DEBUG
"ACPI: Delete PCI Interrupt Routing Table for %04x:%02x\n",
- segment, bus);
+ pci_domain_nr(bus), bus->number);
spin_lock(&acpi_prt_lock);
list_for_each_entry_safe(entry, tmp, &acpi_prt_list, list) {
- if (segment == entry->id.segment && bus == entry->id.bus) {
+ if (pci_domain_nr(bus) == entry->id.segment
+ && bus->number == entry->id.bus) {
list_del(&entry->list);
kfree(entry);
}
diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c
index 196f97d..55b5b90 100644
--- a/drivers/acpi/pci_root.c
+++ b/drivers/acpi/pci_root.c
@@ -63,9 +63,10 @@
struct acpi_pci_root {
struct list_head node;
- struct acpi_device * device;
- struct acpi_pci_id id;
+ struct acpi_device *device;
struct pci_bus *bus;
+ u16 segment;
+ u8 bus_nr;
u32 osc_support_set; /* _OSC state of support bits */
u32 osc_control_set; /* _OSC state of control bits */
@@ -82,7 +83,7 @@
int acpi_pci_register_driver(struct acpi_pci_driver *driver)
{
int n = 0;
- struct list_head *entry;
+ struct acpi_pci_root *root;
struct acpi_pci_driver **pptr = &sub_driver;
while (*pptr)
@@ -92,9 +93,7 @@
if (!driver->add)
return 0;
- list_for_each(entry, &acpi_pci_roots) {
- struct acpi_pci_root *root;
- root = list_entry(entry, struct acpi_pci_root, node);
+ list_for_each_entry(root, &acpi_pci_roots, node) {
driver->add(root->device->handle);
n++;
}
@@ -106,7 +105,7 @@
void acpi_pci_unregister_driver(struct acpi_pci_driver *driver)
{
- struct list_head *entry;
+ struct acpi_pci_root *root;
struct acpi_pci_driver **pptr = &sub_driver;
while (*pptr) {
@@ -120,28 +119,48 @@
if (!driver->remove)
return;
- list_for_each(entry, &acpi_pci_roots) {
- struct acpi_pci_root *root;
- root = list_entry(entry, struct acpi_pci_root, node);
+ list_for_each_entry(root, &acpi_pci_roots, node)
driver->remove(root->device->handle);
- }
}
EXPORT_SYMBOL(acpi_pci_unregister_driver);
acpi_handle acpi_get_pci_rootbridge_handle(unsigned int seg, unsigned int bus)
{
- struct acpi_pci_root *tmp;
+ struct acpi_pci_root *root;
- list_for_each_entry(tmp, &acpi_pci_roots, node) {
- if ((tmp->id.segment == (u16) seg) && (tmp->id.bus == (u16) bus))
- return tmp->device->handle;
- }
+ list_for_each_entry(root, &acpi_pci_roots, node)
+ if ((root->segment == (u16) seg) && (root->bus_nr == (u16) bus))
+ return root->device->handle;
return NULL;
}
EXPORT_SYMBOL_GPL(acpi_get_pci_rootbridge_handle);
+/**
+ * acpi_is_root_bridge - determine whether an ACPI CA node is a PCI root bridge
+ * @handle - the ACPI CA node in question.
+ *
+ * Note: we could make this API take a struct acpi_device * instead, but
+ * for now, it's more convenient to operate on an acpi_handle.
+ */
+int acpi_is_root_bridge(acpi_handle handle)
+{
+ int ret;
+ struct acpi_device *device;
+
+ ret = acpi_bus_get_device(handle, &device);
+ if (ret)
+ return 0;
+
+ ret = acpi_match_device_ids(device, root_device_ids);
+ if (ret)
+ return 0;
+ else
+ return 1;
+}
+EXPORT_SYMBOL_GPL(acpi_is_root_bridge);
+
static acpi_status
get_root_bridge_busnr_callback(struct acpi_resource *resource, void *data)
{
@@ -161,19 +180,22 @@
return AE_OK;
}
-static acpi_status try_get_root_bridge_busnr(acpi_handle handle, int *busnum)
+static acpi_status try_get_root_bridge_busnr(acpi_handle handle,
+ unsigned long long *bus)
{
acpi_status status;
+ int busnum;
- *busnum = -1;
+ busnum = -1;
status =
acpi_walk_resources(handle, METHOD_NAME__CRS,
- get_root_bridge_busnr_callback, busnum);
+ get_root_bridge_busnr_callback, &busnum);
if (ACPI_FAILURE(status))
return status;
/* Check if we really get a bus number from _CRS */
- if (*busnum == -1)
+ if (busnum == -1)
return AE_ERROR;
+ *bus = busnum;
return AE_OK;
}
@@ -298,6 +320,7 @@
static struct acpi_pci_root *acpi_pci_find_root(acpi_handle handle)
{
struct acpi_pci_root *root;
+
list_for_each_entry(root, &acpi_pci_roots, node) {
if (root->device->handle == handle)
return root;
@@ -305,6 +328,87 @@
return NULL;
}
+struct acpi_handle_node {
+ struct list_head node;
+ acpi_handle handle;
+};
+
+/**
+ * acpi_get_pci_dev - convert ACPI CA handle to struct pci_dev
+ * @handle: the handle in question
+ *
+ * Given an ACPI CA handle, the desired PCI device is located in the
+ * list of PCI devices.
+ *
+ * If the device is found, its reference count is increased and this
+ * function returns a pointer to its data structure. The caller must
+ * decrement the reference count by calling pci_dev_put().
+ * If no device is found, %NULL is returned.
+ */
+struct pci_dev *acpi_get_pci_dev(acpi_handle handle)
+{
+ int dev, fn;
+ unsigned long long adr;
+ acpi_status status;
+ acpi_handle phandle;
+ struct pci_bus *pbus;
+ struct pci_dev *pdev = NULL;
+ struct acpi_handle_node *node, *tmp;
+ struct acpi_pci_root *root;
+ LIST_HEAD(device_list);
+
+ /*
+ * Walk up the ACPI CA namespace until we reach a PCI root bridge.
+ */
+ phandle = handle;
+ while (!acpi_is_root_bridge(phandle)) {
+ node = kzalloc(sizeof(struct acpi_handle_node), GFP_KERNEL);
+ if (!node)
+ goto out;
+
+ INIT_LIST_HEAD(&node->node);
+ node->handle = phandle;
+ list_add(&node->node, &device_list);
+
+ status = acpi_get_parent(phandle, &phandle);
+ if (ACPI_FAILURE(status))
+ goto out;
+ }
+
+ root = acpi_pci_find_root(phandle);
+ if (!root)
+ goto out;
+
+ pbus = root->bus;
+
+ /*
+ * Now, walk back down the PCI device tree until we return to our
+ * original handle. Assumes that everything between the PCI root
+ * bridge and the device we're looking for must be a P2P bridge.
+ */
+ list_for_each_entry(node, &device_list, node) {
+ acpi_handle hnd = node->handle;
+ status = acpi_evaluate_integer(hnd, "_ADR", NULL, &adr);
+ if (ACPI_FAILURE(status))
+ goto out;
+ dev = (adr >> 16) & 0xffff;
+ fn = adr & 0xffff;
+
+ pdev = pci_get_slot(pbus, PCI_DEVFN(dev, fn));
+ if (!pdev || hnd == handle)
+ break;
+
+ pbus = pdev->subordinate;
+ pci_dev_put(pdev);
+ }
+out:
+ list_for_each_entry_safe(node, tmp, &device_list, node)
+ kfree(node);
+
+ return pdev;
+}
+EXPORT_SYMBOL_GPL(acpi_get_pci_dev);
+
/**
* acpi_pci_osc_control_set - commit requested control to Firmware
* @handle: acpi_handle for the target ACPI object
@@ -363,31 +467,46 @@
static int __devinit acpi_pci_root_add(struct acpi_device *device)
{
- int result = 0;
- struct acpi_pci_root *root = NULL;
- struct acpi_pci_root *tmp;
- acpi_status status = AE_OK;
- unsigned long long value = 0;
- acpi_handle handle = NULL;
+ unsigned long long segment, bus;
+ acpi_status status;
+ int result;
+ struct acpi_pci_root *root;
+ acpi_handle handle;
struct acpi_device *child;
u32 flags, base_flags;
+ segment = 0;
+ status = acpi_evaluate_integer(device->handle, METHOD_NAME__SEG, NULL,
+ &segment);
+ if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
+ printk(KERN_ERR PREFIX "can't evaluate _SEG\n");
+ return -ENODEV;
+ }
- if (!device)
- return -EINVAL;
+ /* Check _CRS first, then _BBN. If no _BBN, default to zero. */
+ bus = 0;
+ status = try_get_root_bridge_busnr(device->handle, &bus);
+ if (ACPI_FAILURE(status)) {
+ status = acpi_evaluate_integer(device->handle, METHOD_NAME__BBN, NULL, &bus);
+ if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
+ printk(KERN_ERR PREFIX
+ "no bus number in _CRS and can't evaluate _BBN\n");
+ return -ENODEV;
+ }
+ }
root = kzalloc(sizeof(struct acpi_pci_root), GFP_KERNEL);
if (!root)
return -ENOMEM;
- INIT_LIST_HEAD(&root->node);
+ INIT_LIST_HEAD(&root->node);
root->device = device;
+ root->segment = segment & 0xFFFF;
+ root->bus_nr = bus & 0xFF;
strcpy(acpi_device_name(device), ACPI_PCI_ROOT_DEVICE_NAME);
strcpy(acpi_device_class(device), ACPI_PCI_ROOT_CLASS);
device->driver_data = root;
- device->ops.bind = acpi_pci_bind;
-
/*
* All supported architectures that use ACPI have support for
* PCI domains, so we indicate this in _OSC support capabilities.
@@ -395,79 +514,6 @@
flags = base_flags = OSC_PCI_SEGMENT_GROUPS_SUPPORT;
acpi_pci_osc_support(root, flags);
- /*
- * Segment
- * -------
- * Obtained via _SEG, if exists, otherwise assumed to be zero (0).
- */
- status = acpi_evaluate_integer(device->handle, METHOD_NAME__SEG, NULL,
- &value);
- switch (status) {
- case AE_OK:
- root->id.segment = (u16) value;
- break;
- case AE_NOT_FOUND:
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Assuming segment 0 (no _SEG)\n"));
- root->id.segment = 0;
- break;
- default:
- ACPI_EXCEPTION((AE_INFO, status, "Evaluating _SEG"));
- result = -ENODEV;
- goto end;
- }
-
- /*
- * Bus
- * ---
- * Obtained via _BBN, if exists, otherwise assumed to be zero (0).
- */
- status = acpi_evaluate_integer(device->handle, METHOD_NAME__BBN, NULL,
- &value);
- switch (status) {
- case AE_OK:
- root->id.bus = (u16) value;
- break;
- case AE_NOT_FOUND:
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Assuming bus 0 (no _BBN)\n"));
- root->id.bus = 0;
- break;
- default:
- ACPI_EXCEPTION((AE_INFO, status, "Evaluating _BBN"));
- result = -ENODEV;
- goto end;
- }
-
- /* Some systems have wrong _BBN */
- list_for_each_entry(tmp, &acpi_pci_roots, node) {
- if ((tmp->id.segment == root->id.segment)
- && (tmp->id.bus == root->id.bus)) {
- int bus = 0;
- acpi_status status;
-
- printk(KERN_ERR PREFIX
- "Wrong _BBN value, reboot"
- " and use option 'pci=noacpi'\n");
-
- status = try_get_root_bridge_busnr(device->handle, &bus);
- if (ACPI_FAILURE(status))
- break;
- if (bus != root->id.bus) {
- printk(KERN_INFO PREFIX
- "PCI _CRS %d overrides _BBN 0\n", bus);
- root->id.bus = bus;
- }
- break;
- }
- }
- /*
- * Device & Function
- * -----------------
- * Obtained from _ADR (which has already been evaluated for us).
- */
- root->id.device = device->pnp.bus_address >> 16;
- root->id.function = device->pnp.bus_address & 0xFFFF;
-
/*
* TBD: Need PCI interface for enumeration/configuration of roots.
*/
@@ -477,7 +523,7 @@
printk(KERN_INFO PREFIX "%s [%s] (%04x:%02x)\n",
acpi_device_name(device), acpi_device_bid(device),
- root->id.segment, root->id.bus);
+ root->segment, root->bus_nr);
/*
* Scan the Root Bridge
@@ -486,11 +532,11 @@
* PCI namespace does not get created until this call is made (and
* thus the root bridge's pci_dev does not exist).
*/
- root->bus = pci_acpi_scan_root(device, root->id.segment, root->id.bus);
+ root->bus = pci_acpi_scan_root(device, segment, bus);
if (!root->bus) {
printk(KERN_ERR PREFIX
"Bus %04x:%02x not present in PCI namespace\n",
- root->id.segment, root->id.bus);
+ root->segment, root->bus_nr);
result = -ENODEV;
goto end;
}
@@ -500,7 +546,7 @@
* -----------------------
* Thus binding the ACPI and PCI devices.
*/
- result = acpi_pci_bind_root(device, &root->id, root->bus);
+ result = acpi_pci_bind_root(device);
if (result)
goto end;
@@ -511,8 +557,7 @@
*/
status = acpi_get_handle(device->handle, METHOD_NAME__PRT, &handle);
if (ACPI_SUCCESS(status))
- result = acpi_pci_irq_add_prt(device->handle, root->id.segment,
- root->id.bus);
+ result = acpi_pci_irq_add_prt(device->handle, root->bus);
/*
* Scan and bind all _ADR-Based Devices
@@ -531,42 +576,28 @@
if (flags != base_flags)
acpi_pci_osc_support(root, flags);
- end:
- if (result) {
- if (!list_empty(&root->node))
- list_del(&root->node);
- kfree(root);
- }
+ return 0;
+end:
+ if (!list_empty(&root->node))
+ list_del(&root->node);
+ kfree(root);
return result;
}
static int acpi_pci_root_start(struct acpi_device *device)
{
- struct acpi_pci_root *root;
+ struct acpi_pci_root *root = acpi_driver_data(device);
-
- list_for_each_entry(root, &acpi_pci_roots, node) {
- if (root->device == device) {
- pci_bus_add_devices(root->bus);
- return 0;
- }
- }
- return -ENODEV;
+ pci_bus_add_devices(root->bus);
+ return 0;
}
static int acpi_pci_root_remove(struct acpi_device *device, int type)
{
- struct acpi_pci_root *root = NULL;
-
-
- if (!device || !acpi_driver_data(device))
- return -EINVAL;
-
- root = acpi_driver_data(device);
+ struct acpi_pci_root *root = acpi_driver_data(device);
kfree(root);
-
return 0;
}
diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c
index 56665a6..d74365d 100644
--- a/drivers/acpi/power.c
+++ b/drivers/acpi/power.c
@@ -194,7 +194,7 @@
static int acpi_power_on(acpi_handle handle, struct acpi_device *dev)
{
- int result = 0, state;
+ int result = 0;
int found = 0;
acpi_status status = AE_OK;
struct acpi_power_resource *resource = NULL;
@@ -236,18 +236,6 @@
if (ACPI_FAILURE(status))
return -ENODEV;
- if (!acpi_power_nocheck) {
- /*
- * If acpi_power_nocheck is set, it is unnecessary to check
- * the power state after power transition.
- */
- result = acpi_power_get_state(resource->device->handle,
- &state);
- if (result)
- return result;
- if (state != ACPI_POWER_RESOURCE_STATE_ON)
- return -ENOEXEC;
- }
/* Update the power resource's _device_ power state */
resource->device->power.state = ACPI_STATE_D0;
@@ -258,7 +246,7 @@
static int acpi_power_off_device(acpi_handle handle, struct acpi_device *dev)
{
- int result = 0, state;
+ int result = 0;
acpi_status status = AE_OK;
struct acpi_power_resource *resource = NULL;
struct list_head *node, *next;
@@ -293,18 +281,6 @@
if (ACPI_FAILURE(status))
return -ENODEV;
- if (!acpi_power_nocheck) {
- /*
- * If acpi_power_nocheck is set, it is unnecessary to check
- * the power state after power transition.
- */
- result = acpi_power_get_state(handle, &state);
- if (result)
- return result;
- if (state != ACPI_POWER_RESOURCE_STATE_OFF)
- return -ENOEXEC;
- }
-
/* Update the power resource's _device_ power state */
resource->device->power.state = ACPI_STATE_D3;
diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c
index 23f0fb8..84e0f3c 100644
--- a/drivers/acpi/processor_core.c
+++ b/drivers/acpi/processor_core.c
@@ -89,7 +89,7 @@
static const struct acpi_device_id processor_device_ids[] = {
{ACPI_PROCESSOR_OBJECT_HID, 0},
- {ACPI_PROCESSOR_HID, 0},
+ {"ACPI0007", 0},
{"", 0},
};
MODULE_DEVICE_TABLE(acpi, processor_device_ids);
@@ -596,7 +596,21 @@
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"No bus mastering arbitration control\n"));
- if (!strcmp(acpi_device_hid(device), ACPI_PROCESSOR_HID)) {
+ if (!strcmp(acpi_device_hid(device), ACPI_PROCESSOR_OBJECT_HID)) {
+ /* Declared with "Processor" statement; match ProcessorID */
+ status = acpi_evaluate_object(pr->handle, NULL, NULL, &buffer);
+ if (ACPI_FAILURE(status)) {
+ printk(KERN_ERR PREFIX "Evaluating processor object\n");
+ return -ENODEV;
+ }
+
+ /*
+ * TBD: Synch processor ID (via LAPIC/LSAPIC structures) on SMP.
+ * >>> 'acpi_get_processor_id(acpi_id, &id)' in
+ * arch/xxx/acpi.c
+ */
+ pr->acpi_id = object.processor.proc_id;
+ } else {
/*
* Declared with "Device" statement; match _UID.
* Note that we don't handle string _UIDs yet.
@@ -611,20 +625,6 @@
}
device_declaration = 1;
pr->acpi_id = value;
- } else {
- /* Declared with "Processor" statement; match ProcessorID */
- status = acpi_evaluate_object(pr->handle, NULL, NULL, &buffer);
- if (ACPI_FAILURE(status)) {
- printk(KERN_ERR PREFIX "Evaluating processor object\n");
- return -ENODEV;
- }
-
- /*
- * TBD: Synch processor ID (via LAPIC/LSAPIC structures) on SMP.
- * >>> 'acpi_get_processor_id(acpi_id, &id)' in
- * arch/xxx/acpi.c
- */
- pr->acpi_id = object.processor.proc_id;
}
cpu_index = get_cpu_id(pr->handle, device_declaration, pr->acpi_id);
@@ -649,7 +649,16 @@
return -ENODEV;
}
}
-
+ /*
+ * On some boxes several processors use the same processor bus id.
+ * But they are located in different scope. For example:
+ * \_SB.SCK0.CPU0
+ * \_SB.SCK1.CPU0
+ * Rename the processor device bus id. And the new bus id will be
+ * generated as the following format:
+ * CPU+CPU ID.
+ */
+ sprintf(acpi_device_bid(device), "CPU%X", pr->id);
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Processor [%d:%d]\n", pr->id,
pr->acpi_id));
@@ -731,6 +740,8 @@
/* _PDC call should be done before doing anything else (if reqd.). */
arch_acpi_processor_init_pdc(pr);
acpi_processor_set_pdc(pr);
+ arch_acpi_processor_cleanup_pdc(pr);
+
#ifdef CONFIG_CPU_FREQ
acpi_processor_ppc_has_changed(pr);
#endif
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index 10a2d913..0efa59e 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -139,7 +139,7 @@
* are affected too. We pick the most conservative approach: we assume
* that the local APIC stops in both C2 and C3.
*/
-static void acpi_timer_check_state(int state, struct acpi_processor *pr,
+static void lapic_timer_check_state(int state, struct acpi_processor *pr,
struct acpi_processor_cx *cx)
{
struct acpi_processor_power *pwr = &pr->power;
@@ -162,7 +162,7 @@
pr->power.timer_broadcast_on_state = state;
}
-static void acpi_propagate_timer_broadcast(struct acpi_processor *pr)
+static void lapic_timer_propagate_broadcast(struct acpi_processor *pr)
{
unsigned long reason;
@@ -173,7 +173,7 @@
}
/* Power(C) State timer broadcast control */
-static void acpi_state_timer_broadcast(struct acpi_processor *pr,
+static void lapic_timer_state_broadcast(struct acpi_processor *pr,
struct acpi_processor_cx *cx,
int broadcast)
{
@@ -190,10 +190,10 @@
#else
-static void acpi_timer_check_state(int state, struct acpi_processor *pr,
+static void lapic_timer_check_state(int state, struct acpi_processor *pr,
struct acpi_processor_cx *cstate) { }
-static void acpi_propagate_timer_broadcast(struct acpi_processor *pr) { }
-static void acpi_state_timer_broadcast(struct acpi_processor *pr,
+static void lapic_timer_propagate_broadcast(struct acpi_processor *pr) { }
+static void lapic_timer_state_broadcast(struct acpi_processor *pr,
struct acpi_processor_cx *cx,
int broadcast)
{
@@ -515,7 +515,8 @@
static void acpi_processor_power_verify_c3(struct acpi_processor *pr,
struct acpi_processor_cx *cx)
{
- static int bm_check_flag;
+ static int bm_check_flag = -1;
+ static int bm_control_flag = -1;
if (!cx->address)
@@ -545,12 +546,14 @@
}
/* All the logic here assumes flags.bm_check is same across all CPUs */
- if (!bm_check_flag) {
+ if (bm_check_flag == -1) {
/* Determine whether bm_check is needed based on CPU */
acpi_processor_power_init_bm_check(&(pr->flags), pr->id);
bm_check_flag = pr->flags.bm_check;
+ bm_control_flag = pr->flags.bm_control;
} else {
pr->flags.bm_check = bm_check_flag;
+ pr->flags.bm_control = bm_control_flag;
}
if (pr->flags.bm_check) {
@@ -614,29 +617,25 @@
switch (cx->type) {
case ACPI_STATE_C1:
cx->valid = 1;
- acpi_timer_check_state(i, pr, cx);
break;
case ACPI_STATE_C2:
acpi_processor_power_verify_c2(cx);
- if (cx->valid)
- acpi_timer_check_state(i, pr, cx);
break;
case ACPI_STATE_C3:
acpi_processor_power_verify_c3(pr, cx);
- if (cx->valid)
- acpi_timer_check_state(i, pr, cx);
break;
}
- if (cx->valid)
- tsc_check_state(cx->type);
+ if (!cx->valid)
+ continue;
- if (cx->valid)
- working++;
+ lapic_timer_check_state(i, pr, cx);
+ tsc_check_state(cx->type);
+ working++;
}
- acpi_propagate_timer_broadcast(pr);
+ lapic_timer_propagate_broadcast(pr);
return (working);
}
@@ -839,7 +838,7 @@
return 0;
}
- acpi_state_timer_broadcast(pr, cx, 1);
+ lapic_timer_state_broadcast(pr, cx, 1);
kt1 = ktime_get_real();
acpi_idle_do_entry(cx);
kt2 = ktime_get_real();
@@ -847,7 +846,7 @@
local_irq_enable();
cx->usage++;
- acpi_state_timer_broadcast(pr, cx, 0);
+ lapic_timer_state_broadcast(pr, cx, 0);
return idle_time;
}
@@ -892,7 +891,7 @@
* Must be done before busmaster disable as we might need to
* access HPET !
*/
- acpi_state_timer_broadcast(pr, cx, 1);
+ lapic_timer_state_broadcast(pr, cx, 1);
if (cx->type == ACPI_STATE_C3)
ACPI_FLUSH_CPU_CACHE();
@@ -914,7 +913,7 @@
cx->usage++;
- acpi_state_timer_broadcast(pr, cx, 0);
+ lapic_timer_state_broadcast(pr, cx, 0);
cx->time += sleep_ticks;
return idle_time;
}
@@ -981,7 +980,7 @@
* Must be done before busmaster disable as we might need to
* access HPET !
*/
- acpi_state_timer_broadcast(pr, cx, 1);
+ lapic_timer_state_broadcast(pr, cx, 1);
kt1 = ktime_get_real();
/*
@@ -1026,7 +1025,7 @@
cx->usage++;
- acpi_state_timer_broadcast(pr, cx, 0);
+ lapic_timer_state_broadcast(pr, cx, 0);
cx->time += sleep_ticks;
return idle_time;
}
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index 8ff510b..781435d 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -95,7 +95,7 @@
}
static DEVICE_ATTR(modalias, 0444, acpi_device_modalias_show, NULL);
-static int acpi_bus_hot_remove_device(void *context)
+static void acpi_bus_hot_remove_device(void *context)
{
struct acpi_device *device;
acpi_handle handle = context;
@@ -104,10 +104,10 @@
acpi_status status = AE_OK;
if (acpi_bus_get_device(handle, &device))
- return 0;
+ return;
if (!device)
- return 0;
+ return;
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Hot-removing device %s...\n", dev_name(&device->dev)));
@@ -115,7 +115,7 @@
if (acpi_bus_trim(device, 1)) {
printk(KERN_ERR PREFIX
"Removing device failed\n");
- return -1;
+ return;
}
/* power off device */
@@ -142,9 +142,10 @@
*/
status = acpi_evaluate_object(handle, "_EJ0", &arg_list, NULL);
if (ACPI_FAILURE(status))
- return -ENODEV;
+ printk(KERN_WARNING PREFIX
+ "Eject device failed\n");
- return 0;
+ return;
}
static ssize_t
@@ -155,7 +156,6 @@
acpi_status status;
acpi_object_type type = 0;
struct acpi_device *acpi_device = to_acpi_device(d);
- struct task_struct *task;
if ((!count) || (buf[0] != '1')) {
return -EINVAL;
@@ -172,11 +172,7 @@
goto err;
}
- /* remove the device in another thread to fix the deadlock issue */
- task = kthread_run(acpi_bus_hot_remove_device,
- acpi_device->handle, "acpi_hot_remove_device");
- if (IS_ERR(task))
- ret = PTR_ERR(task);
+ acpi_os_hotplug_execute(acpi_bus_hot_remove_device, acpi_device->handle);
err:
return ret;
}
@@ -198,12 +194,12 @@
int result;
result = acpi_get_name(acpi_dev->handle, ACPI_FULL_PATHNAME, &path);
- if(result)
+ if (result)
goto end;
result = sprintf(buf, "%s\n", (char*)path.pointer);
kfree(path.pointer);
- end:
+end:
return result;
}
static DEVICE_ATTR(path, 0444, acpi_device_path_show, NULL);
@@ -217,21 +213,21 @@
/*
* Devices gotten from FADT don't have a "path" attribute
*/
- if(dev->handle) {
+ if (dev->handle) {
result = device_create_file(&dev->dev, &dev_attr_path);
- if(result)
+ if (result)
goto end;
}
- if(dev->flags.hardware_id) {
+ if (dev->flags.hardware_id) {
result = device_create_file(&dev->dev, &dev_attr_hid);
- if(result)
+ if (result)
goto end;
}
- if (dev->flags.hardware_id || dev->flags.compatible_ids){
+ if (dev->flags.hardware_id || dev->flags.compatible_ids) {
result = device_create_file(&dev->dev, &dev_attr_modalias);
- if(result)
+ if (result)
goto end;
}
@@ -242,7 +238,7 @@
status = acpi_get_handle(dev->handle, "_EJ0", &temp);
if (ACPI_SUCCESS(status))
result = device_create_file(&dev->dev, &dev_attr_eject);
- end:
+end:
return result;
}
@@ -262,9 +258,9 @@
if (dev->flags.hardware_id || dev->flags.compatible_ids)
device_remove_file(&dev->dev, &dev_attr_modalias);
- if(dev->flags.hardware_id)
+ if (dev->flags.hardware_id)
device_remove_file(&dev->dev, &dev_attr_hid);
- if(dev->handle)
+ if (dev->handle)
device_remove_file(&dev->dev, &dev_attr_path);
}
/* --------------------------------------------------------------------------
@@ -512,7 +508,7 @@
break;
}
}
- if(!found) {
+ if (!found) {
acpi_device_bus_id = new_bus_id;
strcpy(acpi_device_bus_id->bus_id, device->flags.hardware_id ? device->pnp.hardware_id : "device");
acpi_device_bus_id->instance_no = 0;
@@ -530,22 +526,21 @@
if (device->parent)
device->dev.parent = &parent->dev;
device->dev.bus = &acpi_bus_type;
- device_initialize(&device->dev);
device->dev.release = &acpi_device_release;
- result = device_add(&device->dev);
- if(result) {
- dev_err(&device->dev, "Error adding device\n");
+ result = device_register(&device->dev);
+ if (result) {
+ dev_err(&device->dev, "Error registering device\n");
goto end;
}
result = acpi_device_setup_files(device);
- if(result)
+ if (result)
printk(KERN_ERR PREFIX "Error creating sysfs interface for device %s\n",
dev_name(&device->dev));
device->removal_type = ACPI_BUS_REMOVAL_NORMAL;
return 0;
- end:
+end:
mutex_lock(&acpi_device_lock);
if (device->parent)
list_del(&device->node);
@@ -577,7 +572,7 @@
* @device: the device to add and initialize
* @driver: driver for the device
*
- * Used to initialize a device via its device driver. Called whenever a
+ * Used to initialize a device via its device driver. Called whenever a
* driver is bound to a device. Invokes the driver's add() ops.
*/
static int
@@ -585,7 +580,6 @@
{
int result = 0;
-
if (!device || !driver)
return -EINVAL;
@@ -802,7 +796,7 @@
if (!acpi_match_device_ids(device, button_device_ids))
device->wakeup.flags.run_wake = 1;
- end:
+end:
if (ACPI_FAILURE(status))
device->flags.wake_capable = 0;
return 0;
@@ -1070,7 +1064,7 @@
break;
}
- /*
+ /*
* \_SB
* ----
* Fix for the system root bus device -- the only root-level device.
@@ -1320,7 +1314,7 @@
device->parent->ops.bind(device);
}
- end:
+end:
if (!result)
*child = device;
else {
@@ -1464,7 +1458,6 @@
return result;
}
-
EXPORT_SYMBOL(acpi_bus_add);
int acpi_bus_start(struct acpi_device *device)
@@ -1484,7 +1477,6 @@
}
return result;
}
-
EXPORT_SYMBOL(acpi_bus_start);
int acpi_bus_trim(struct acpi_device *start, int rmdevice)
@@ -1542,7 +1534,6 @@
}
EXPORT_SYMBOL_GPL(acpi_bus_trim);
-
static int acpi_bus_scan_fixed(struct acpi_device *root)
{
int result = 0;
@@ -1610,6 +1601,6 @@
if (result)
acpi_device_unregister(acpi_root, ACPI_BUS_REMOVAL_NORMAL);
- Done:
+Done:
return result;
}
diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index 1bdfb37..8851315 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -76,6 +76,7 @@
static int brightness_switch_enabled = 1;
module_param(brightness_switch_enabled, bool, 0644);
+static int register_count = 0;
static int acpi_video_bus_add(struct acpi_device *device);
static int acpi_video_bus_remove(struct acpi_device *device, int type);
static int acpi_video_resume(struct acpi_device *device);
@@ -586,6 +587,14 @@
DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5315"),
},
},
+ {
+ .callback = video_set_bqc_offset,
+ .ident = "Acer Aspire 7720",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 7720"),
+ },
+ },
{}
};
@@ -976,6 +985,11 @@
device->backlight->props.max_brightness = device->brightness->count-3;
kfree(name);
+ result = sysfs_create_link(&device->backlight->dev.kobj,
+ &device->dev->dev.kobj, "device");
+ if (result)
+ printk(KERN_ERR PREFIX "Create sysfs link\n");
+
device->cdev = thermal_cooling_device_register("LCD",
device->dev, &video_cooling_ops);
if (IS_ERR(device->cdev))
@@ -1054,15 +1068,15 @@
static int acpi_video_bus_check(struct acpi_video_bus *video)
{
acpi_status status = -ENOENT;
- struct device *dev;
+ struct pci_dev *dev;
if (!video)
return -EINVAL;
- dev = acpi_get_physical_pci_device(video->device->handle);
+ dev = acpi_get_pci_dev(video->device->handle);
if (!dev)
return -ENODEV;
- put_device(dev);
+ pci_dev_put(dev);
/* Since there is no HID, CID and so on for VGA driver, we have
* to check well known required nodes.
@@ -1990,6 +2004,7 @@
status = acpi_remove_notify_handler(device->dev->handle,
ACPI_DEVICE_NOTIFY,
acpi_video_device_notify);
+ sysfs_remove_link(&device->backlight->dev.kobj, "device");
backlight_device_unregister(device->backlight);
if (device->cdev) {
sysfs_remove_link(&device->dev->dev.kobj,
@@ -2318,6 +2333,13 @@
int acpi_video_register(void)
{
int result = 0;
+ if (register_count) {
+ /*
+ * if the function of acpi_video_register is already called,
+ * don't register the acpi_vide_bus again and return no error.
+ */
+ return 0;
+ }
acpi_video_dir = proc_mkdir(ACPI_VIDEO_CLASS, acpi_root_dir);
if (!acpi_video_dir)
@@ -2329,10 +2351,35 @@
return -ENODEV;
}
+ /*
+ * When the acpi_video_bus is loaded successfully, increase
+ * the counter reference.
+ */
+ register_count = 1;
+
return 0;
}
EXPORT_SYMBOL(acpi_video_register);
+void acpi_video_unregister(void)
+{
+ if (!register_count) {
+ /*
+ * If the acpi video bus is already unloaded, don't
+ * unload it again and return directly.
+ */
+ return;
+ }
+ acpi_bus_unregister_driver(&acpi_video_bus);
+
+ remove_proc_entry(ACPI_VIDEO_CLASS, acpi_root_dir);
+
+ register_count = 0;
+
+ return;
+}
+EXPORT_SYMBOL(acpi_video_unregister);
+
/*
* This is kind of nasty. Hardware using Intel chipsets may require
* the video opregion code to be run first in order to initialise
@@ -2350,16 +2397,12 @@
return acpi_video_register();
}
-void acpi_video_exit(void)
+static void __exit acpi_video_exit(void)
{
-
- acpi_bus_unregister_driver(&acpi_video_bus);
-
- remove_proc_entry(ACPI_VIDEO_CLASS, acpi_root_dir);
+ acpi_video_unregister();
return;
}
-EXPORT_SYMBOL(acpi_video_exit);
module_init(acpi_video_init);
module_exit(acpi_video_exit);
diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c
index 0973727..7cd2b63 100644
--- a/drivers/acpi/video_detect.c
+++ b/drivers/acpi/video_detect.c
@@ -10,7 +10,7 @@
* assinged
*
* After PCI devices are glued with ACPI devices
- * acpi_get_physical_pci_device() can be called to identify ACPI graphics
+ * acpi_get_pci_dev() can be called to identify ACPI graphics
* devices for which a real graphics card is plugged in
*
* Now acpi_video_get_capabilities() can be called to check which
@@ -36,6 +36,7 @@
#include <linux/acpi.h>
#include <linux/dmi.h>
+#include <linux/pci.h>
ACPI_MODULE_NAME("video");
#define _COMPONENT ACPI_VIDEO_COMPONENT
@@ -109,7 +110,7 @@
find_video(acpi_handle handle, u32 lvl, void *context, void **rv)
{
long *cap = context;
- struct device *dev;
+ struct pci_dev *dev;
struct acpi_device *acpi_dev;
const struct acpi_device_id video_ids[] = {
@@ -120,10 +121,10 @@
return AE_OK;
if (!acpi_match_device_ids(acpi_dev, video_ids)) {
- dev = acpi_get_physical_pci_device(handle);
+ dev = acpi_get_pci_dev(handle);
if (!dev)
return AE_OK;
- put_device(dev);
+ pci_dev_put(dev);
*cap |= acpi_is_video_device(acpi_dev);
}
return AE_OK;
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 2aa1908..b17c57f 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -679,6 +679,14 @@
If unsure, say N.
+config PATA_AT91
+ tristate "PATA support for AT91SAM9260"
+ depends on ARM && ARCH_AT91
+ help
+ This option enables support for IDE devices on the Atmel AT91SAM9260 SoC.
+
+ If unsure, say N.
+
config PATA_OF_PLATFORM
tristate "OpenFirmware platform device PATA support"
depends on PATA_PLATFORM && PPC_OF
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index 1558059..38906f9 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -72,6 +72,7 @@
obj-$(CONFIG_PATA_BF54X) += pata_bf54x.o
obj-$(CONFIG_PATA_OCTEON_CF) += pata_octeon_cf.o
obj-$(CONFIG_PATA_PLATFORM) += pata_platform.o
+obj-$(CONFIG_PATA_AT91) += pata_at91.o
obj-$(CONFIG_PATA_OF_PLATFORM) += pata_of_platform.o
obj-$(CONFIG_PATA_ICSIDE) += pata_icside.o
# Should be last but two libata driver
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index ca4d208..045a486 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -125,19 +125,19 @@
static int atapi_enabled = 1;
module_param(atapi_enabled, int, 0444);
-MODULE_PARM_DESC(atapi_enabled, "Enable discovery of ATAPI devices (0=off, 1=on)");
+MODULE_PARM_DESC(atapi_enabled, "Enable discovery of ATAPI devices (0=off, 1=on [default])");
static int atapi_dmadir = 0;
module_param(atapi_dmadir, int, 0444);
-MODULE_PARM_DESC(atapi_dmadir, "Enable ATAPI DMADIR bridge support (0=off, 1=on)");
+MODULE_PARM_DESC(atapi_dmadir, "Enable ATAPI DMADIR bridge support (0=off [default], 1=on)");
int atapi_passthru16 = 1;
module_param(atapi_passthru16, int, 0444);
-MODULE_PARM_DESC(atapi_passthru16, "Enable ATA_16 passthru for ATAPI devices; on by default (0=off, 1=on)");
+MODULE_PARM_DESC(atapi_passthru16, "Enable ATA_16 passthru for ATAPI devices (0=off, 1=on [default])");
int libata_fua = 0;
module_param_named(fua, libata_fua, int, 0444);
-MODULE_PARM_DESC(fua, "FUA support (0=off, 1=on)");
+MODULE_PARM_DESC(fua, "FUA support (0=off [default], 1=on)");
static int ata_ignore_hpa;
module_param_named(ignore_hpa, ata_ignore_hpa, int, 0644);
@@ -153,11 +153,11 @@
int libata_noacpi = 0;
module_param_named(noacpi, libata_noacpi, int, 0444);
-MODULE_PARM_DESC(noacpi, "Disables the use of ACPI in probe/suspend/resume when set");
+MODULE_PARM_DESC(noacpi, "Disable the use of ACPI in probe/suspend/resume (0=off [default], 1=on)");
int libata_allow_tpm = 0;
module_param_named(allow_tpm, libata_allow_tpm, int, 0444);
-MODULE_PARM_DESC(allow_tpm, "Permit the use of TPM commands");
+MODULE_PARM_DESC(allow_tpm, "Permit the use of TPM commands (0=off [default], 1=on)");
MODULE_AUTHOR("Jeff Garzik");
MODULE_DESCRIPTION("Library module for ATA devices");
@@ -1993,11 +1993,17 @@
* Check if the current speed of the device requires IORDY. Used
* by various controllers for chip configuration.
*/
-
unsigned int ata_pio_need_iordy(const struct ata_device *adev)
{
- /* Controller doesn't support IORDY. Probably a pointless check
- as the caller should know this */
+ /* Don't set IORDY if we're preparing for reset. IORDY may
+ * lead to controller lock up on certain controllers if the
+ * port is not occupied. See bko#11703 for details.
+ */
+ if (adev->link->ap->pflags & ATA_PFLAG_RESETTING)
+ return 0;
+ /* Controller doesn't support IORDY. Probably a pointless
+ * check as the caller should know this.
+ */
if (adev->link->ap->flags & ATA_FLAG_NO_IORDY)
return 0;
/* CF spec. r4.1 Table 22 says no iordy on PIO5 and PIO6. */
@@ -2020,7 +2026,6 @@
* Compute the highest mode possible if we are not using iordy. Return
* -1 if no iordy mode is available.
*/
-
static u32 ata_pio_mask_no_iordy(const struct ata_device *adev)
{
/* If we have no drive specific rule, then PIO 2 is non IORDY */
diff --git a/drivers/ata/pata_at91.c b/drivers/ata/pata_at91.c
new file mode 100644
index 0000000..4b27617
--- /dev/null
+++ b/drivers/ata/pata_at91.c
@@ -0,0 +1,361 @@
+/*
+ * PATA driver for AT91SAM9260 Static Memory Controller
+ * with CompactFlash interface in True IDE mode
+ *
+ * Copyright (C) 2009 Matyukevich Sergey
+ *
+ * Based on:
+ * * generic platform driver by Paul Mundt: drivers/ata/pata_platform.c
+ * * pata_at32 driver by Kristoffer Nyborg Gregertsen
+ * * at91_ide driver by Stanislaw Gruszka
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <scsi/scsi_host.h>
+#include <linux/ata.h>
+#include <linux/clk.h>
+#include <linux/libata.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+
+#include <mach/at91sam9260_matrix.h>
+#include <mach/at91sam9_smc.h>
+#include <mach/at91sam9260.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+
+
+#define DRV_NAME "pata_at91"
+#define DRV_VERSION "0.1"
+
+#define CF_IDE_OFFSET 0x00c00000
+#define CF_ALT_IDE_OFFSET 0x00e00000
+#define CF_IDE_RES_SIZE 0x08
+
+struct at91_ide_info {
+ unsigned long mode;
+ unsigned int cs;
+
+ void __iomem *ide_addr;
+ void __iomem *alt_addr;
+};
+
+const struct ata_timing initial_timing =
+ {XFER_PIO_0, 70, 290, 240, 600, 165, 150, 600, 0};
+
+static unsigned int calc_mck_cycles(unsigned int ns, unsigned int mck_hz)
+{
+ unsigned long mul;
+
+ /*
+ * cycles = x [nsec] * f [Hz] / 10^9 [ns in sec] =
+ * x * (f / 1_000_000_000) =
+ * x * ((f * 65536) / 1_000_000_000) / 65536 =
+ * x * (((f / 10_000) * 65536) / 100_000) / 65536 =
+ */
+
+ mul = (mck_hz / 10000) << 16;
+ mul /= 100000;
+
+ return (ns * mul + 65536) >> 16; /* rounding */
+}
+
+static void set_smc_mode(struct at91_ide_info *info)
+{
+ at91_sys_write(AT91_SMC_MODE(info->cs), info->mode);
+ return;
+}
+
+static void set_smc_timing(struct device *dev,
+ struct at91_ide_info *info, const struct ata_timing *ata)
+{
+ int read_cycle, write_cycle, active, recover;
+ int nrd_setup, nrd_pulse, nrd_recover;
+ int nwe_setup, nwe_pulse;
+
+ int ncs_write_setup, ncs_write_pulse;
+ int ncs_read_setup, ncs_read_pulse;
+
+ unsigned int mck_hz;
+ struct clk *mck;
+
+ read_cycle = ata->cyc8b;
+ nrd_setup = ata->setup;
+ nrd_pulse = ata->act8b;
+ nrd_recover = ata->rec8b;
+
+ mck = clk_get(NULL, "mck");
+ BUG_ON(IS_ERR(mck));
+ mck_hz = clk_get_rate(mck);
+
+ read_cycle = calc_mck_cycles(read_cycle, mck_hz);
+ nrd_setup = calc_mck_cycles(nrd_setup, mck_hz);
+ nrd_pulse = calc_mck_cycles(nrd_pulse, mck_hz);
+ nrd_recover = calc_mck_cycles(nrd_recover, mck_hz);
+
+ clk_put(mck);
+
+ active = nrd_setup + nrd_pulse;
+ recover = read_cycle - active;
+
+ /* Need at least two cycles recovery */
+ if (recover < 2)
+ read_cycle = active + 2;
+
+ /* (CS0, CS1, DIR, OE) <= (CFCE1, CFCE2, CFRNW, NCSX) timings */
+ ncs_read_setup = 1;
+ ncs_read_pulse = read_cycle - 2;
+
+ /* Write timings same as read timings */
+ write_cycle = read_cycle;
+ nwe_setup = nrd_setup;
+ nwe_pulse = nrd_pulse;
+ ncs_write_setup = ncs_read_setup;
+ ncs_write_pulse = ncs_read_pulse;
+
+ dev_dbg(dev, "ATA timings: nrd_setup = %d nrd_pulse = %d nrd_cycle = %d\n",
+ nrd_setup, nrd_pulse, read_cycle);
+ dev_dbg(dev, "ATA timings: nwe_setup = %d nwe_pulse = %d nwe_cycle = %d\n",
+ nwe_setup, nwe_pulse, write_cycle);
+ dev_dbg(dev, "ATA timings: ncs_read_setup = %d ncs_read_pulse = %d\n",
+ ncs_read_setup, ncs_read_pulse);
+ dev_dbg(dev, "ATA timings: ncs_write_setup = %d ncs_write_pulse = %d\n",
+ ncs_write_setup, ncs_write_pulse);
+
+ at91_sys_write(AT91_SMC_SETUP(info->cs),
+ AT91_SMC_NWESETUP_(nwe_setup) |
+ AT91_SMC_NRDSETUP_(nrd_setup) |
+ AT91_SMC_NCS_WRSETUP_(ncs_write_setup) |
+ AT91_SMC_NCS_RDSETUP_(ncs_read_setup));
+
+ at91_sys_write(AT91_SMC_PULSE(info->cs),
+ AT91_SMC_NWEPULSE_(nwe_pulse) |
+ AT91_SMC_NRDPULSE_(nrd_pulse) |
+ AT91_SMC_NCS_WRPULSE_(ncs_write_pulse) |
+ AT91_SMC_NCS_RDPULSE_(ncs_read_pulse));
+
+ at91_sys_write(AT91_SMC_CYCLE(info->cs),
+ AT91_SMC_NWECYCLE_(write_cycle) |
+ AT91_SMC_NRDCYCLE_(read_cycle));
+
+ return;
+}
+
+static void pata_at91_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+ struct at91_ide_info *info = ap->host->private_data;
+ struct ata_timing timing;
+ int ret;
+
+ /* Compute ATA timing and set it to SMC */
+ ret = ata_timing_compute(adev, adev->pio_mode, &timing, 1000, 0);
+ if (ret) {
+ dev_warn(ap->dev, "Failed to compute ATA timing %d, \
+ set PIO_0 timing\n", ret);
+ set_smc_timing(ap->dev, info, &initial_timing);
+ } else {
+ set_smc_timing(ap->dev, info, &timing);
+ }
+
+ /* Setup SMC mode */
+ set_smc_mode(info);
+
+ return;
+}
+
+static unsigned int pata_at91_data_xfer_noirq(struct ata_device *dev,
+ unsigned char *buf, unsigned int buflen, int rw)
+{
+ struct at91_ide_info *info = dev->link->ap->host->private_data;
+ unsigned int consumed;
+ unsigned long flags;
+ unsigned int mode;
+
+ local_irq_save(flags);
+ mode = at91_sys_read(AT91_SMC_MODE(info->cs));
+
+ /* set 16bit mode before writing data */
+ at91_sys_write(AT91_SMC_MODE(info->cs),
+ (mode & ~AT91_SMC_DBW) | AT91_SMC_DBW_16);
+
+ consumed = ata_sff_data_xfer(dev, buf, buflen, rw);
+
+ /* restore 8bit mode after data is written */
+ at91_sys_write(AT91_SMC_MODE(info->cs),
+ (mode & ~AT91_SMC_DBW) | AT91_SMC_DBW_8);
+
+ local_irq_restore(flags);
+ return consumed;
+}
+
+static struct scsi_host_template pata_at91_sht = {
+ ATA_PIO_SHT(DRV_NAME),
+};
+
+static struct ata_port_operations pata_at91_port_ops = {
+ .inherits = &ata_sff_port_ops,
+
+ .sff_data_xfer = pata_at91_data_xfer_noirq,
+ .set_piomode = pata_at91_set_piomode,
+ .cable_detect = ata_cable_40wire,
+ .port_start = ATA_OP_NULL,
+};
+
+static int __devinit pata_at91_probe(struct platform_device *pdev)
+{
+ struct at91_cf_data *board = pdev->dev.platform_data;
+ struct device *dev = &pdev->dev;
+ struct at91_ide_info *info;
+ struct resource *mem_res;
+ struct ata_host *host;
+ struct ata_port *ap;
+ int irq_flags = 0;
+ int irq = 0;
+ int ret;
+
+ /* get platform resources: IO/CTL memories and irq/rst pins */
+
+ if (pdev->num_resources != 1) {
+ dev_err(&pdev->dev, "invalid number of resources\n");
+ return -EINVAL;
+ }
+
+ mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+ if (!mem_res) {
+ dev_err(dev, "failed to get mem resource\n");
+ return -EINVAL;
+ }
+
+ irq = board->irq_pin;
+
+ /* init ata host */
+
+ host = ata_host_alloc(dev, 1);
+
+ if (!host)
+ return -ENOMEM;
+
+ ap = host->ports[0];
+ ap->ops = &pata_at91_port_ops;
+ ap->flags |= ATA_FLAG_SLAVE_POSS;
+ ap->pio_mask = ATA_PIO4;
+
+ if (!irq) {
+ ap->flags |= ATA_FLAG_PIO_POLLING;
+ ata_port_desc(ap, "no IRQ, using PIO polling");
+ }
+
+ info = kzalloc(sizeof(*info), GFP_KERNEL);
+
+ if (!info) {
+ dev_err(dev, "failed to allocate memory for private data\n");
+ return -ENOMEM;
+ }
+
+ info->cs = board->chipselect;
+ info->mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
+ AT91_SMC_EXNWMODE_READY | AT91_SMC_BAT_SELECT |
+ AT91_SMC_DBW_8 | AT91_SMC_TDF_(0);
+
+ info->ide_addr = devm_ioremap(dev,
+ mem_res->start + CF_IDE_OFFSET, CF_IDE_RES_SIZE);
+
+ if (!info->ide_addr) {
+ dev_err(dev, "failed to map IO base\n");
+ ret = -ENOMEM;
+ goto err_ide_ioremap;
+ }
+
+ info->alt_addr = devm_ioremap(dev,
+ mem_res->start + CF_ALT_IDE_OFFSET, CF_IDE_RES_SIZE);
+
+ if (!info->alt_addr) {
+ dev_err(dev, "failed to map CTL base\n");
+ ret = -ENOMEM;
+ goto err_alt_ioremap;
+ }
+
+ ap->ioaddr.cmd_addr = info->ide_addr;
+ ap->ioaddr.ctl_addr = info->alt_addr + 0x06;
+ ap->ioaddr.altstatus_addr = ap->ioaddr.ctl_addr;
+
+ ata_sff_std_ports(&ap->ioaddr);
+
+ ata_port_desc(ap, "mmio cmd 0x%llx ctl 0x%llx",
+ (unsigned long long)mem_res->start + CF_IDE_OFFSET,
+ (unsigned long long)mem_res->start + CF_ALT_IDE_OFFSET);
+
+ host->private_data = info;
+
+ return ata_host_activate(host, irq ? gpio_to_irq(irq) : 0,
+ irq ? ata_sff_interrupt : NULL,
+ irq_flags, &pata_at91_sht);
+
+err_alt_ioremap:
+ devm_iounmap(dev, info->ide_addr);
+
+err_ide_ioremap:
+ kfree(info);
+
+ return ret;
+}
+
+static int __devexit pata_at91_remove(struct platform_device *pdev)
+{
+ struct ata_host *host = dev_get_drvdata(&pdev->dev);
+ struct at91_ide_info *info = host->private_data;
+ struct device *dev = &pdev->dev;
+
+ if (!host)
+ return 0;
+
+ ata_host_detach(host);
+
+ if (!info)
+ return 0;
+
+ devm_iounmap(dev, info->ide_addr);
+ devm_iounmap(dev, info->alt_addr);
+
+ kfree(info);
+ return 0;
+}
+
+static struct platform_driver pata_at91_driver = {
+ .probe = pata_at91_probe,
+ .remove = __devexit_p(pata_at91_remove),
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init pata_at91_init(void)
+{
+ return platform_driver_register(&pata_at91_driver);
+}
+
+static void __exit pata_at91_exit(void)
+{
+ platform_driver_unregister(&pata_at91_driver);
+}
+
+
+module_init(pata_at91_init);
+module_exit(pata_at91_exit);
+
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Driver for CF in True IDE mode on AT91SAM9260 SoC");
+MODULE_AUTHOR("Matyukevich Sergey");
+MODULE_VERSION(DRV_VERSION);
+
diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c
index 36b8629..94eaa43 100644
--- a/drivers/ata/sata_fsl.c
+++ b/drivers/ata/sata_fsl.c
@@ -1378,6 +1378,37 @@
return 0;
}
+#ifdef CONFIG_PM
+static int sata_fsl_suspend(struct of_device *op, pm_message_t state)
+{
+ struct ata_host *host = dev_get_drvdata(&op->dev);
+ return ata_host_suspend(host, state);
+}
+
+static int sata_fsl_resume(struct of_device *op)
+{
+ struct ata_host *host = dev_get_drvdata(&op->dev);
+ struct sata_fsl_host_priv *host_priv = host->private_data;
+ int ret;
+ void __iomem *hcr_base = host_priv->hcr_base;
+ struct ata_port *ap = host->ports[0];
+ struct sata_fsl_port_priv *pp = ap->private_data;
+
+ ret = sata_fsl_init_controller(host);
+ if (ret) {
+ dev_printk(KERN_ERR, &op->dev,
+ "Error initialize hardware\n");
+ return ret;
+ }
+
+ /* Recovery the CHBA register in host controller cmd register set */
+ iowrite32(pp->cmdslot_paddr & 0xffffffff, hcr_base + CHBA);
+
+ ata_host_resume(host);
+ return 0;
+}
+#endif
+
static struct of_device_id fsl_sata_match[] = {
{
.compatible = "fsl,pq-sata",
@@ -1392,6 +1423,10 @@
.match_table = fsl_sata_match,
.probe = sata_fsl_probe,
.remove = sata_fsl_remove,
+#ifdef CONFIG_PM
+ .suspend = sata_fsl_suspend,
+ .resume = sata_fsl_resume,
+#endif
};
static int __init sata_fsl_init(void)
diff --git a/drivers/char/bsr.c b/drivers/char/bsr.c
index 140ea10..c02db01f7 100644
--- a/drivers/char/bsr.c
+++ b/drivers/char/bsr.c
@@ -27,6 +27,7 @@
#include <linux/cdev.h>
#include <linux/list.h>
#include <linux/mm.h>
+#include <asm/pgtable.h>
#include <asm/io.h>
/*
@@ -75,12 +76,13 @@
static int bsr_major;
enum {
- BSR_8 = 0,
- BSR_16 = 1,
- BSR_64 = 2,
- BSR_128 = 3,
- BSR_UNKNOWN = 4,
- BSR_MAX = 5,
+ BSR_8 = 0,
+ BSR_16 = 1,
+ BSR_64 = 2,
+ BSR_128 = 3,
+ BSR_4096 = 4,
+ BSR_UNKNOWN = 5,
+ BSR_MAX = 6,
};
static unsigned bsr_types[BSR_MAX];
@@ -117,15 +119,22 @@
{
unsigned long size = vma->vm_end - vma->vm_start;
struct bsr_dev *dev = filp->private_data;
+ int ret;
- if (size > dev->bsr_len || (size & (PAGE_SIZE-1)))
- return -EINVAL;
-
- vma->vm_flags |= (VM_IO | VM_DONTEXPAND);
vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
- if (io_remap_pfn_range(vma, vma->vm_start, dev->bsr_addr >> PAGE_SHIFT,
- size, vma->vm_page_prot))
+ /* check for the case of a small BSR device and map one 4k page for it*/
+ if (dev->bsr_len < PAGE_SIZE && size == PAGE_SIZE)
+ ret = remap_4k_pfn(vma, vma->vm_start, dev->bsr_addr >> 12,
+ vma->vm_page_prot);
+ else if (size <= dev->bsr_len)
+ ret = io_remap_pfn_range(vma, vma->vm_start,
+ dev->bsr_addr >> PAGE_SHIFT,
+ size, vma->vm_page_prot);
+ else
+ return -EINVAL;
+
+ if (ret)
return -EAGAIN;
return 0;
@@ -205,6 +214,11 @@
cur->bsr_stride = bsr_stride[i];
cur->bsr_dev = MKDEV(bsr_major, i + total_bsr_devs);
+ /* if we have a bsr_len of > 4k and less then PAGE_SIZE (64k pages) */
+ /* we can only map 4k of it, so only advertise the 4k in sysfs */
+ if (cur->bsr_len > 4096 && cur->bsr_len < PAGE_SIZE)
+ cur->bsr_len = 4096;
+
switch(cur->bsr_bytes) {
case 8:
cur->bsr_type = BSR_8;
@@ -218,9 +232,11 @@
case 128:
cur->bsr_type = BSR_128;
break;
+ case 4096:
+ cur->bsr_type = BSR_4096;
+ break;
default:
cur->bsr_type = BSR_UNKNOWN;
- printk(KERN_INFO "unknown BSR size %d\n",cur->bsr_bytes);
}
cur->bsr_num = bsr_types[cur->bsr_type];
diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c
index 9533f43..52d953e 100644
--- a/drivers/char/mxser.c
+++ b/drivers/char/mxser.c
@@ -1048,8 +1048,6 @@
if (retval)
return retval;
- /* unmark here for very high baud rate (ex. 921600 bps) used */
- tty->low_latency = 1;
return 0;
}
diff --git a/drivers/char/nozomi.c b/drivers/char/nozomi.c
index d6102b6..574f1c7 100644
--- a/drivers/char/nozomi.c
+++ b/drivers/char/nozomi.c
@@ -1591,8 +1591,6 @@
/* Enable interrupt downlink for channel */
if (port->port.count == 1) {
- /* FIXME: is this needed now ? */
- tty->low_latency = 1;
tty->driver_data = port;
tty_port_tty_set(&port->port, tty);
DBG1("open: %d", port->token_dl);
diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c
index 1386625..a2e67e6 100644
--- a/drivers/char/synclink_gt.c
+++ b/drivers/char/synclink_gt.c
@@ -467,7 +467,6 @@
static unsigned int tbuf_bytes(struct slgt_info *info);
static void reset_tbufs(struct slgt_info *info);
static void tdma_reset(struct slgt_info *info);
-static void tdma_start(struct slgt_info *info);
static void tx_load(struct slgt_info *info, const char *buf, unsigned int count);
static void get_signals(struct slgt_info *info);
@@ -795,6 +794,18 @@
}
}
+static void update_tx_timer(struct slgt_info *info)
+{
+ /*
+ * use worst case speed of 1200bps to calculate transmit timeout
+ * based on data in buffers (tbuf_bytes) and FIFO (128 bytes)
+ */
+ if (info->params.mode == MGSL_MODE_HDLC) {
+ int timeout = (tbuf_bytes(info) * 7) + 1000;
+ mod_timer(&info->tx_timer, jiffies + msecs_to_jiffies(timeout));
+ }
+}
+
static int write(struct tty_struct *tty,
const unsigned char *buf, int count)
{
@@ -838,8 +849,18 @@
spin_lock_irqsave(&info->lock,flags);
if (!info->tx_active)
tx_start(info);
- else
- tdma_start(info);
+ else if (!(rd_reg32(info, TDCSR) & BIT0)) {
+ /* transmit still active but transmit DMA stopped */
+ unsigned int i = info->tbuf_current;
+ if (!i)
+ i = info->tbuf_count;
+ i--;
+ /* if DMA buf unsent must try later after tx idle */
+ if (desc_count(info->tbufs[i]))
+ ret = 0;
+ }
+ if (ret > 0)
+ update_tx_timer(info);
spin_unlock_irqrestore(&info->lock,flags);
}
@@ -1502,10 +1523,9 @@
/* save start time for transmit timeout detection */
dev->trans_start = jiffies;
- /* start hardware transmitter if necessary */
spin_lock_irqsave(&info->lock,flags);
- if (!info->tx_active)
- tx_start(info);
+ tx_start(info);
+ update_tx_timer(info);
spin_unlock_irqrestore(&info->lock,flags);
return 0;
@@ -3946,50 +3966,19 @@
slgt_irq_on(info, IRQ_TXUNDER + IRQ_TXIDLE);
/* clear tx idle and underrun status bits */
wr_reg16(info, SSR, (unsigned short)(IRQ_TXIDLE + IRQ_TXUNDER));
- if (info->params.mode == MGSL_MODE_HDLC)
- mod_timer(&info->tx_timer, jiffies +
- msecs_to_jiffies(5000));
} else {
slgt_irq_off(info, IRQ_TXDATA);
slgt_irq_on(info, IRQ_TXIDLE);
/* clear tx idle status bit */
wr_reg16(info, SSR, IRQ_TXIDLE);
}
- tdma_start(info);
+ /* set 1st descriptor address and start DMA */
+ wr_reg32(info, TDDAR, info->tbufs[info->tbuf_start].pdesc);
+ wr_reg32(info, TDCSR, BIT2 + BIT0);
info->tx_active = true;
}
}
-/*
- * start transmit DMA if inactive and there are unsent buffers
- */
-static void tdma_start(struct slgt_info *info)
-{
- unsigned int i;
-
- if (rd_reg32(info, TDCSR) & BIT0)
- return;
-
- /* transmit DMA inactive, check for unsent buffers */
- i = info->tbuf_start;
- while (!desc_count(info->tbufs[i])) {
- if (++i == info->tbuf_count)
- i = 0;
- if (i == info->tbuf_current)
- return;
- }
- info->tbuf_start = i;
-
- /* there are unsent buffers, start transmit DMA */
-
- /* reset needed if previous error condition */
- tdma_reset(info);
-
- /* set 1st descriptor address */
- wr_reg32(info, TDDAR, info->tbufs[info->tbuf_start].pdesc);
- wr_reg32(info, TDCSR, BIT2 + BIT0); /* IRQ + DMA enable */
-}
-
static void tx_stop(struct slgt_info *info)
{
unsigned short val;
@@ -5004,8 +4993,7 @@
info->icount.txtimeout++;
}
spin_lock_irqsave(&info->lock,flags);
- info->tx_active = false;
- info->tx_count = 0;
+ tx_stop(info);
spin_unlock_irqrestore(&info->lock,flags);
#if SYNCLINK_GENERIC_HDLC
diff --git a/drivers/char/tty_port.c b/drivers/char/tty_port.c
index 62dadfc..4e862a7 100644
--- a/drivers/char/tty_port.c
+++ b/drivers/char/tty_port.c
@@ -193,7 +193,7 @@
{
int do_clocal = 0, retval;
unsigned long flags;
- DECLARE_WAITQUEUE(wait, current);
+ DEFINE_WAIT(wait);
int cd;
/* block if port is in the process of being closed */
diff --git a/drivers/dma/txx9dmac.c b/drivers/dma/txx9dmac.c
index 9aa9ea9..88dab52 100644
--- a/drivers/dma/txx9dmac.c
+++ b/drivers/dma/txx9dmac.c
@@ -432,23 +432,27 @@
list_splice_init(&txd->tx_list, &dc->free_list);
list_move(&desc->desc_node, &dc->free_list);
- /*
- * We use dma_unmap_page() regardless of how the buffers were
- * mapped before they were submitted...
- */
if (!ds) {
dma_addr_t dmaaddr;
if (!(txd->flags & DMA_COMPL_SKIP_DEST_UNMAP)) {
dmaaddr = is_dmac64(dc) ?
desc->hwdesc.DAR : desc->hwdesc32.DAR;
- dma_unmap_page(chan2parent(&dc->chan), dmaaddr,
- desc->len, DMA_FROM_DEVICE);
+ if (txd->flags & DMA_COMPL_DEST_UNMAP_SINGLE)
+ dma_unmap_single(chan2parent(&dc->chan),
+ dmaaddr, desc->len, DMA_FROM_DEVICE);
+ else
+ dma_unmap_page(chan2parent(&dc->chan),
+ dmaaddr, desc->len, DMA_FROM_DEVICE);
}
if (!(txd->flags & DMA_COMPL_SKIP_SRC_UNMAP)) {
dmaaddr = is_dmac64(dc) ?
desc->hwdesc.SAR : desc->hwdesc32.SAR;
- dma_unmap_page(chan2parent(&dc->chan), dmaaddr,
- desc->len, DMA_TO_DEVICE);
+ if (txd->flags & DMA_COMPL_SRC_UNMAP_SINGLE)
+ dma_unmap_single(chan2parent(&dc->chan),
+ dmaaddr, desc->len, DMA_TO_DEVICE);
+ else
+ dma_unmap_page(chan2parent(&dc->chan),
+ dmaaddr, desc->len, DMA_TO_DEVICE);
}
}
diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index c36bf40..858fe60 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -754,13 +754,13 @@
static enum edac_type amd64_determine_edac_cap(struct amd64_pvt *pvt)
{
int bit;
- enum dev_type edac_cap = EDAC_NONE;
+ enum dev_type edac_cap = EDAC_FLAG_NONE;
bit = (boot_cpu_data.x86 > 0xf || pvt->ext_model >= OPTERON_CPU_REV_F)
? 19
: 17;
- if (pvt->dclr0 >> BIT(bit))
+ if (pvt->dclr0 & BIT(bit))
edac_cap = EDAC_FLAG_SECDED;
return edac_cap;
@@ -1269,7 +1269,7 @@
if (channels == 0)
channels = 1;
- debugf0("DIMM count= %d\n", channels);
+ debugf0("MCT channel count: %d\n", channels);
return channels;
@@ -2966,7 +2966,12 @@
" Use of the override can cause "
"unknown side effects.\n");
ret = -ENODEV;
- }
+ } else
+ /*
+ * enable further driver loading if ECC enable is
+ * overridden.
+ */
+ ret = 0;
} else {
amd64_printk(KERN_INFO,
"ECC is enabled by BIOS, Proceeding "
@@ -3006,7 +3011,6 @@
mci->mtype_cap = MEM_FLAG_DDR2 | MEM_FLAG_RDDR2;
mci->edac_ctl_cap = EDAC_FLAG_NONE;
- mci->edac_cap = EDAC_FLAG_NONE;
if (pvt->nbcap & K8_NBCAP_SECDED)
mci->edac_ctl_cap |= EDAC_FLAG_SECDED;
@@ -3052,7 +3056,7 @@
if (!pvt)
goto err_exit;
- pvt->mc_node_id = get_mc_node_id_from_pdev(dram_f2_ctl);
+ pvt->mc_node_id = get_node_id(dram_f2_ctl);
pvt->dram_f2_ctl = dram_f2_ctl;
pvt->ext_model = boot_cpu_data.x86_model >> 4;
@@ -3179,8 +3183,7 @@
{
int ret = 0;
- debugf0("(MC node=%d,mc_type='%s')\n",
- get_mc_node_id_from_pdev(pdev),
+ debugf0("(MC node=%d,mc_type='%s')\n", get_node_id(pdev),
get_amd_family_name(mc_type->driver_data));
ret = pci_enable_device(pdev);
@@ -3319,15 +3322,17 @@
err = amd64_init_2nd_stage(pvt_lookup[nb]);
if (err)
- goto err_exit;
+ goto err_2nd_stage;
}
amd64_setup_pci_device();
return 0;
+err_2nd_stage:
+ debugf0("2nd stage failed\n");
+
err_exit:
- debugf0("'finish_setup' stage failed\n");
pci_unregister_driver(&amd64_pci_driver);
return err;
diff --git a/drivers/edac/amd64_edac.h b/drivers/edac/amd64_edac.h
index a159957..ba73015 100644
--- a/drivers/edac/amd64_edac.h
+++ b/drivers/edac/amd64_edac.h
@@ -444,7 +444,7 @@
#define K8_MSR_MC4ADDR 0x0412
/* AMD sets the first MC device at device ID 0x18. */
-static inline int get_mc_node_id_from_pdev(struct pci_dev *pdev)
+static inline int get_node_id(struct pci_dev *pdev)
{
return PCI_SLOT(pdev->devfn) - 0x18;
}
diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
index c961fe4..39b393d 100644
--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -81,6 +81,7 @@
config DRM_I915
tristate "i915 driver"
+ depends on AGP_INTEL
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
index 4e89ab0..fe23f29 100644
--- a/drivers/gpu/drm/Makefile
+++ b/drivers/gpu/drm/Makefile
@@ -16,6 +16,7 @@
drm-$(CONFIG_COMPAT) += drm_ioc32.o
obj-$(CONFIG_DRM) += drm.o
+obj-$(CONFIG_DRM_TTM) += ttm/
obj-$(CONFIG_DRM_TDFX) += tdfx/
obj-$(CONFIG_DRM_R128) += r128/
obj-$(CONFIG_DRM_RADEON)+= radeon/
@@ -26,4 +27,3 @@
obj-$(CONFIG_DRM_SIS) += sis/
obj-$(CONFIG_DRM_SAVAGE)+= savage/
obj-$(CONFIG_DRM_VIA) +=via/
-obj-$(CONFIG_DRM_TTM) += ttm/
diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index 7d08352..80cc6d0 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -294,10 +294,10 @@
unsigned vactive = (pt->vactive_vblank_hi & 0xf0) << 4 | pt->vactive_lo;
unsigned hblank = (pt->hactive_hblank_hi & 0xf) << 8 | pt->hblank_lo;
unsigned vblank = (pt->vactive_vblank_hi & 0xf) << 8 | pt->vblank_lo;
- unsigned hsync_offset = (pt->hsync_vsync_offset_pulse_width_hi & 0x3) << 8 | pt->hsync_offset_lo;
- unsigned hsync_pulse_width = (pt->hsync_vsync_offset_pulse_width_hi & 0xc) << 6 | pt->hsync_pulse_width_lo;
- unsigned vsync_offset = (pt->hsync_vsync_offset_pulse_width_hi & 0x30) | (pt->vsync_offset_pulse_width_lo & 0xf);
- unsigned vsync_pulse_width = (pt->hsync_vsync_offset_pulse_width_hi & 0xc0) >> 2 | pt->vsync_offset_pulse_width_lo >> 4;
+ unsigned hsync_offset = (pt->hsync_vsync_offset_pulse_width_hi & 0xc0) << 2 | pt->hsync_offset_lo;
+ unsigned hsync_pulse_width = (pt->hsync_vsync_offset_pulse_width_hi & 0x30) << 4 | pt->hsync_pulse_width_lo;
+ unsigned vsync_offset = (pt->hsync_vsync_offset_pulse_width_hi & 0xc) >> 2 | pt->vsync_offset_pulse_width_lo >> 4;
+ unsigned vsync_pulse_width = (pt->hsync_vsync_offset_pulse_width_hi & 0x3) << 4 | (pt->vsync_offset_pulse_width_lo & 0xf);
/* ignore tiny modes */
if (hactive < 64 || vactive < 64)
@@ -347,8 +347,8 @@
mode->flags |= (pt->misc & DRM_EDID_PT_VSYNC_POSITIVE) ?
DRM_MODE_FLAG_PVSYNC : DRM_MODE_FLAG_NVSYNC;
- mode->width_mm = pt->width_mm_lo | (pt->width_height_mm_hi & 0xf) << 8;
- mode->height_mm = pt->height_mm_lo | (pt->width_height_mm_hi & 0xf0) << 4;
+ mode->width_mm = pt->width_mm_lo | (pt->width_height_mm_hi & 0xf0) << 4;
+ mode->height_mm = pt->height_mm_lo | (pt->width_height_mm_hi & 0xf) << 8;
if (quirks & EDID_QUIRK_DETAILED_IN_CM) {
mode->width_mm *= 10;
diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile
index 51c5a05..30d6b99 100644
--- a/drivers/gpu/drm/i915/Makefile
+++ b/drivers/gpu/drm/i915/Makefile
@@ -13,6 +13,8 @@
intel_crt.o \
intel_lvds.o \
intel_bios.o \
+ intel_dp.o \
+ intel_dp_i2c.o \
intel_hdmi.o \
intel_sdvo.o \
intel_modes.o \
diff --git a/drivers/gpu/drm/i915/dvo.h b/drivers/gpu/drm/i915/dvo.h
index e747ac4..288fc50 100644
--- a/drivers/gpu/drm/i915/dvo.h
+++ b/drivers/gpu/drm/i915/dvo.h
@@ -37,7 +37,7 @@
/* GPIO register used for i2c bus to control this device */
u32 gpio;
int slave_addr;
- struct intel_i2c_chan *i2c_bus;
+ struct i2c_adapter *i2c_bus;
const struct intel_dvo_dev_ops *dev_ops;
void *dev_priv;
@@ -52,7 +52,7 @@
* Returns NULL if the device does not exist.
*/
bool (*init)(struct intel_dvo_device *dvo,
- struct intel_i2c_chan *i2cbus);
+ struct i2c_adapter *i2cbus);
/*
* Called to allow the output a chance to create properties after the
diff --git a/drivers/gpu/drm/i915/dvo_ch7017.c b/drivers/gpu/drm/i915/dvo_ch7017.c
index 03d4b49..621815b 100644
--- a/drivers/gpu/drm/i915/dvo_ch7017.c
+++ b/drivers/gpu/drm/i915/dvo_ch7017.c
@@ -176,19 +176,20 @@
static bool ch7017_read(struct intel_dvo_device *dvo, int addr, uint8_t *val)
{
- struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
+ struct i2c_adapter *adapter = dvo->i2c_bus;
+ struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter);
u8 out_buf[2];
u8 in_buf[2];
struct i2c_msg msgs[] = {
{
- .addr = i2cbus->slave_addr,
+ .addr = dvo->slave_addr,
.flags = 0,
.len = 1,
.buf = out_buf,
},
{
- .addr = i2cbus->slave_addr,
+ .addr = dvo->slave_addr,
.flags = I2C_M_RD,
.len = 1,
.buf = in_buf,
@@ -208,10 +209,11 @@
static bool ch7017_write(struct intel_dvo_device *dvo, int addr, uint8_t val)
{
- struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
+ struct i2c_adapter *adapter = dvo->i2c_bus;
+ struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter);
uint8_t out_buf[2];
struct i2c_msg msg = {
- .addr = i2cbus->slave_addr,
+ .addr = dvo->slave_addr,
.flags = 0,
.len = 2,
.buf = out_buf,
@@ -228,8 +230,9 @@
/** Probes for a CH7017 on the given bus and slave address. */
static bool ch7017_init(struct intel_dvo_device *dvo,
- struct intel_i2c_chan *i2cbus)
+ struct i2c_adapter *adapter)
{
+ struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter);
struct ch7017_priv *priv;
uint8_t val;
@@ -237,8 +240,7 @@
if (priv == NULL)
return false;
- dvo->i2c_bus = i2cbus;
- dvo->i2c_bus->slave_addr = dvo->slave_addr;
+ dvo->i2c_bus = adapter;
dvo->dev_priv = priv;
if (!ch7017_read(dvo, CH7017_DEVICE_ID, &val))
@@ -248,7 +250,7 @@
val != CH7018_DEVICE_ID_VALUE &&
val != CH7019_DEVICE_ID_VALUE) {
DRM_DEBUG("ch701x not detected, got %d: from %s Slave %d.\n",
- val, i2cbus->adapter.name,i2cbus->slave_addr);
+ val, i2cbus->adapter.name,dvo->slave_addr);
goto fail;
}
diff --git a/drivers/gpu/drm/i915/dvo_ch7xxx.c b/drivers/gpu/drm/i915/dvo_ch7xxx.c
index d2fd95d..a9b8962 100644
--- a/drivers/gpu/drm/i915/dvo_ch7xxx.c
+++ b/drivers/gpu/drm/i915/dvo_ch7xxx.c
@@ -123,19 +123,20 @@
static bool ch7xxx_readb(struct intel_dvo_device *dvo, int addr, uint8_t *ch)
{
struct ch7xxx_priv *ch7xxx= dvo->dev_priv;
- struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
+ struct i2c_adapter *adapter = dvo->i2c_bus;
+ struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter);
u8 out_buf[2];
u8 in_buf[2];
struct i2c_msg msgs[] = {
{
- .addr = i2cbus->slave_addr,
+ .addr = dvo->slave_addr,
.flags = 0,
.len = 1,
.buf = out_buf,
},
{
- .addr = i2cbus->slave_addr,
+ .addr = dvo->slave_addr,
.flags = I2C_M_RD,
.len = 1,
.buf = in_buf,
@@ -152,7 +153,7 @@
if (!ch7xxx->quiet) {
DRM_DEBUG("Unable to read register 0x%02x from %s:%02x.\n",
- addr, i2cbus->adapter.name, i2cbus->slave_addr);
+ addr, i2cbus->adapter.name, dvo->slave_addr);
}
return false;
}
@@ -161,10 +162,11 @@
static bool ch7xxx_writeb(struct intel_dvo_device *dvo, int addr, uint8_t ch)
{
struct ch7xxx_priv *ch7xxx = dvo->dev_priv;
- struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
+ struct i2c_adapter *adapter = dvo->i2c_bus;
+ struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter);
uint8_t out_buf[2];
struct i2c_msg msg = {
- .addr = i2cbus->slave_addr,
+ .addr = dvo->slave_addr,
.flags = 0,
.len = 2,
.buf = out_buf,
@@ -178,14 +180,14 @@
if (!ch7xxx->quiet) {
DRM_DEBUG("Unable to write register 0x%02x to %s:%d.\n",
- addr, i2cbus->adapter.name, i2cbus->slave_addr);
+ addr, i2cbus->adapter.name, dvo->slave_addr);
}
return false;
}
static bool ch7xxx_init(struct intel_dvo_device *dvo,
- struct intel_i2c_chan *i2cbus)
+ struct i2c_adapter *adapter)
{
/* this will detect the CH7xxx chip on the specified i2c bus */
struct ch7xxx_priv *ch7xxx;
@@ -196,8 +198,7 @@
if (ch7xxx == NULL)
return false;
- dvo->i2c_bus = i2cbus;
- dvo->i2c_bus->slave_addr = dvo->slave_addr;
+ dvo->i2c_bus = adapter;
dvo->dev_priv = ch7xxx;
ch7xxx->quiet = true;
@@ -207,7 +208,7 @@
name = ch7xxx_get_id(vendor);
if (!name) {
DRM_DEBUG("ch7xxx not detected; got 0x%02x from %s slave %d.\n",
- vendor, i2cbus->adapter.name, i2cbus->slave_addr);
+ vendor, adapter->name, dvo->slave_addr);
goto out;
}
@@ -217,7 +218,7 @@
if (device != CH7xxx_DID) {
DRM_DEBUG("ch7xxx not detected; got 0x%02x from %s slave %d.\n",
- vendor, i2cbus->adapter.name, i2cbus->slave_addr);
+ vendor, adapter->name, dvo->slave_addr);
goto out;
}
diff --git a/drivers/gpu/drm/i915/dvo_ivch.c b/drivers/gpu/drm/i915/dvo_ivch.c
index 0c8d375..aa176f9 100644
--- a/drivers/gpu/drm/i915/dvo_ivch.c
+++ b/drivers/gpu/drm/i915/dvo_ivch.c
@@ -169,13 +169,14 @@
static bool ivch_read(struct intel_dvo_device *dvo, int addr, uint16_t *data)
{
struct ivch_priv *priv = dvo->dev_priv;
- struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
+ struct i2c_adapter *adapter = dvo->i2c_bus;
+ struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter);
u8 out_buf[1];
u8 in_buf[2];
struct i2c_msg msgs[] = {
{
- .addr = i2cbus->slave_addr,
+ .addr = dvo->slave_addr,
.flags = I2C_M_RD,
.len = 0,
},
@@ -186,7 +187,7 @@
.buf = out_buf,
},
{
- .addr = i2cbus->slave_addr,
+ .addr = dvo->slave_addr,
.flags = I2C_M_RD | I2C_M_NOSTART,
.len = 2,
.buf = in_buf,
@@ -202,7 +203,7 @@
if (!priv->quiet) {
DRM_DEBUG("Unable to read register 0x%02x from %s:%02x.\n",
- addr, i2cbus->adapter.name, i2cbus->slave_addr);
+ addr, i2cbus->adapter.name, dvo->slave_addr);
}
return false;
}
@@ -211,10 +212,11 @@
static bool ivch_write(struct intel_dvo_device *dvo, int addr, uint16_t data)
{
struct ivch_priv *priv = dvo->dev_priv;
- struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
+ struct i2c_adapter *adapter = dvo->i2c_bus;
+ struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter);
u8 out_buf[3];
struct i2c_msg msg = {
- .addr = i2cbus->slave_addr,
+ .addr = dvo->slave_addr,
.flags = 0,
.len = 3,
.buf = out_buf,
@@ -229,7 +231,7 @@
if (!priv->quiet) {
DRM_DEBUG("Unable to write register 0x%02x to %s:%d.\n",
- addr, i2cbus->adapter.name, i2cbus->slave_addr);
+ addr, i2cbus->adapter.name, dvo->slave_addr);
}
return false;
@@ -237,7 +239,7 @@
/** Probes the given bus and slave address for an ivch */
static bool ivch_init(struct intel_dvo_device *dvo,
- struct intel_i2c_chan *i2cbus)
+ struct i2c_adapter *adapter)
{
struct ivch_priv *priv;
uint16_t temp;
@@ -246,8 +248,7 @@
if (priv == NULL)
return false;
- dvo->i2c_bus = i2cbus;
- dvo->i2c_bus->slave_addr = dvo->slave_addr;
+ dvo->i2c_bus = adapter;
dvo->dev_priv = priv;
priv->quiet = true;
diff --git a/drivers/gpu/drm/i915/dvo_sil164.c b/drivers/gpu/drm/i915/dvo_sil164.c
index 033a4bb..e1c1f73 100644
--- a/drivers/gpu/drm/i915/dvo_sil164.c
+++ b/drivers/gpu/drm/i915/dvo_sil164.c
@@ -76,19 +76,20 @@
static bool sil164_readb(struct intel_dvo_device *dvo, int addr, uint8_t *ch)
{
struct sil164_priv *sil = dvo->dev_priv;
- struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
+ struct i2c_adapter *adapter = dvo->i2c_bus;
+ struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter);
u8 out_buf[2];
u8 in_buf[2];
struct i2c_msg msgs[] = {
{
- .addr = i2cbus->slave_addr,
+ .addr = dvo->slave_addr,
.flags = 0,
.len = 1,
.buf = out_buf,
},
{
- .addr = i2cbus->slave_addr,
+ .addr = dvo->slave_addr,
.flags = I2C_M_RD,
.len = 1,
.buf = in_buf,
@@ -105,7 +106,7 @@
if (!sil->quiet) {
DRM_DEBUG("Unable to read register 0x%02x from %s:%02x.\n",
- addr, i2cbus->adapter.name, i2cbus->slave_addr);
+ addr, i2cbus->adapter.name, dvo->slave_addr);
}
return false;
}
@@ -113,10 +114,11 @@
static bool sil164_writeb(struct intel_dvo_device *dvo, int addr, uint8_t ch)
{
struct sil164_priv *sil= dvo->dev_priv;
- struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
+ struct i2c_adapter *adapter = dvo->i2c_bus;
+ struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter);
uint8_t out_buf[2];
struct i2c_msg msg = {
- .addr = i2cbus->slave_addr,
+ .addr = dvo->slave_addr,
.flags = 0,
.len = 2,
.buf = out_buf,
@@ -130,7 +132,7 @@
if (!sil->quiet) {
DRM_DEBUG("Unable to write register 0x%02x to %s:%d.\n",
- addr, i2cbus->adapter.name, i2cbus->slave_addr);
+ addr, i2cbus->adapter.name, dvo->slave_addr);
}
return false;
@@ -138,7 +140,7 @@
/* Silicon Image 164 driver for chip on i2c bus */
static bool sil164_init(struct intel_dvo_device *dvo,
- struct intel_i2c_chan *i2cbus)
+ struct i2c_adapter *adapter)
{
/* this will detect the SIL164 chip on the specified i2c bus */
struct sil164_priv *sil;
@@ -148,8 +150,7 @@
if (sil == NULL)
return false;
- dvo->i2c_bus = i2cbus;
- dvo->i2c_bus->slave_addr = dvo->slave_addr;
+ dvo->i2c_bus = adapter;
dvo->dev_priv = sil;
sil->quiet = true;
@@ -158,7 +159,7 @@
if (ch != (SIL164_VID & 0xff)) {
DRM_DEBUG("sil164 not detected got %d: from %s Slave %d.\n",
- ch, i2cbus->adapter.name, i2cbus->slave_addr);
+ ch, adapter->name, dvo->slave_addr);
goto out;
}
@@ -167,7 +168,7 @@
if (ch != (SIL164_DID & 0xff)) {
DRM_DEBUG("sil164 not detected got %d: from %s Slave %d.\n",
- ch, i2cbus->adapter.name, i2cbus->slave_addr);
+ ch, adapter->name, dvo->slave_addr);
goto out;
}
sil->quiet = false;
diff --git a/drivers/gpu/drm/i915/dvo_tfp410.c b/drivers/gpu/drm/i915/dvo_tfp410.c
index 207fda8..9ecc907 100644
--- a/drivers/gpu/drm/i915/dvo_tfp410.c
+++ b/drivers/gpu/drm/i915/dvo_tfp410.c
@@ -101,19 +101,20 @@
static bool tfp410_readb(struct intel_dvo_device *dvo, int addr, uint8_t *ch)
{
struct tfp410_priv *tfp = dvo->dev_priv;
- struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
+ struct i2c_adapter *adapter = dvo->i2c_bus;
+ struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter);
u8 out_buf[2];
u8 in_buf[2];
struct i2c_msg msgs[] = {
{
- .addr = i2cbus->slave_addr,
+ .addr = dvo->slave_addr,
.flags = 0,
.len = 1,
.buf = out_buf,
},
{
- .addr = i2cbus->slave_addr,
+ .addr = dvo->slave_addr,
.flags = I2C_M_RD,
.len = 1,
.buf = in_buf,
@@ -130,7 +131,7 @@
if (!tfp->quiet) {
DRM_DEBUG("Unable to read register 0x%02x from %s:%02x.\n",
- addr, i2cbus->adapter.name, i2cbus->slave_addr);
+ addr, i2cbus->adapter.name, dvo->slave_addr);
}
return false;
}
@@ -138,10 +139,11 @@
static bool tfp410_writeb(struct intel_dvo_device *dvo, int addr, uint8_t ch)
{
struct tfp410_priv *tfp = dvo->dev_priv;
- struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
+ struct i2c_adapter *adapter = dvo->i2c_bus;
+ struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter);
uint8_t out_buf[2];
struct i2c_msg msg = {
- .addr = i2cbus->slave_addr,
+ .addr = dvo->slave_addr,
.flags = 0,
.len = 2,
.buf = out_buf,
@@ -155,7 +157,7 @@
if (!tfp->quiet) {
DRM_DEBUG("Unable to write register 0x%02x to %s:%d.\n",
- addr, i2cbus->adapter.name, i2cbus->slave_addr);
+ addr, i2cbus->adapter.name, dvo->slave_addr);
}
return false;
@@ -174,7 +176,7 @@
/* Ti TFP410 driver for chip on i2c bus */
static bool tfp410_init(struct intel_dvo_device *dvo,
- struct intel_i2c_chan *i2cbus)
+ struct i2c_adapter *adapter)
{
/* this will detect the tfp410 chip on the specified i2c bus */
struct tfp410_priv *tfp;
@@ -184,20 +186,19 @@
if (tfp == NULL)
return false;
- dvo->i2c_bus = i2cbus;
- dvo->i2c_bus->slave_addr = dvo->slave_addr;
+ dvo->i2c_bus = adapter;
dvo->dev_priv = tfp;
tfp->quiet = true;
if ((id = tfp410_getid(dvo, TFP410_VID_LO)) != TFP410_VID) {
DRM_DEBUG("tfp410 not detected got VID %X: from %s Slave %d.\n",
- id, i2cbus->adapter.name, i2cbus->slave_addr);
+ id, adapter->name, dvo->slave_addr);
goto out;
}
if ((id = tfp410_getid(dvo, TFP410_DID_LO)) != TFP410_DID) {
DRM_DEBUG("tfp410 not detected got DID %X: from %s Slave %d.\n",
- id, i2cbus->adapter.name, i2cbus->slave_addr);
+ id, adapter->name, dvo->slave_addr);
goto out;
}
tfp->quiet = false;
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index 98560e1..e3cb402 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -67,8 +67,6 @@
pci_save_state(dev->pdev);
- i915_save_state(dev);
-
/* If KMS is active, we do the leavevt stuff here */
if (drm_core_check_feature(dev, DRIVER_MODESET)) {
if (i915_gem_idle(dev))
@@ -77,6 +75,8 @@
drm_irq_uninstall(dev);
}
+ i915_save_state(dev);
+
intel_opregion_free(dev, 1);
if (state.event == PM_EVENT_SUSPEND) {
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 7a84f04..bb4c2d3 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -306,6 +306,17 @@
u32 saveCURBPOS;
u32 saveCURBBASE;
u32 saveCURSIZE;
+ u32 saveDP_B;
+ u32 saveDP_C;
+ u32 saveDP_D;
+ u32 savePIPEA_GMCH_DATA_M;
+ u32 savePIPEB_GMCH_DATA_M;
+ u32 savePIPEA_GMCH_DATA_N;
+ u32 savePIPEB_GMCH_DATA_N;
+ u32 savePIPEA_DP_LINK_M;
+ u32 savePIPEB_DP_LINK_M;
+ u32 savePIPEA_DP_LINK_N;
+ u32 savePIPEB_DP_LINK_N;
struct {
struct drm_mm gtt_space;
@@ -857,6 +868,7 @@
#define HAS_128_BYTE_Y_TILING(dev) (IS_I9XX(dev) && !(IS_I915G(dev) || \
IS_I915GM(dev)))
#define SUPPORTS_INTEGRATED_HDMI(dev) (IS_G4X(dev) || IS_IGDNG(dev))
+#define SUPPORTS_INTEGRATED_DP(dev) (IS_G4X(dev) || IS_IGDNG(dev))
#define I915_HAS_HOTPLUG(dev) (IS_I945G(dev) || IS_I945GM(dev) || IS_I965G(dev))
#define PRIMARY_RINGBUFFER_SIZE (128*1024)
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index fd2b8bd..876b65c 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -1006,7 +1006,7 @@
mutex_lock(&dev->struct_mutex);
#if WATCH_BUF
- DRM_INFO("set_domain_ioctl %p(%d), %08x %08x\n",
+ DRM_INFO("set_domain_ioctl %p(%zd), %08x %08x\n",
obj, obj->size, read_domains, write_domain);
#endif
if (read_domains & I915_GEM_DOMAIN_GTT) {
@@ -1050,7 +1050,7 @@
}
#if WATCH_BUF
- DRM_INFO("%s: sw_finish %d (%p %d)\n",
+ DRM_INFO("%s: sw_finish %d (%p %zd)\n",
__func__, args->handle, obj, obj->size);
#endif
obj_priv = obj->driver_private;
@@ -2423,7 +2423,7 @@
}
#if WATCH_BUF
- DRM_INFO("Binding object of size %d at 0x%08x\n",
+ DRM_INFO("Binding object of size %zd at 0x%08x\n",
obj->size, obj_priv->gtt_offset);
#endif
ret = i915_gem_object_get_pages(obj);
@@ -4227,6 +4227,7 @@
void
i915_gem_load(struct drm_device *dev)
{
+ int i;
drm_i915_private_t *dev_priv = dev->dev_private;
spin_lock_init(&dev_priv->mm.active_list_lock);
@@ -4246,6 +4247,18 @@
else
dev_priv->num_fence_regs = 8;
+ /* Initialize fence registers to zero */
+ if (IS_I965G(dev)) {
+ for (i = 0; i < 16; i++)
+ I915_WRITE64(FENCE_REG_965_0 + (i * 8), 0);
+ } else {
+ for (i = 0; i < 8; i++)
+ I915_WRITE(FENCE_REG_830_0 + (i * 4), 0);
+ if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
+ for (i = 0; i < 8; i++)
+ I915_WRITE(FENCE_REG_945_8 + (i * 4), 0);
+ }
+
i915_gem_detect_bit_6_swizzle(dev);
}
diff --git a/drivers/gpu/drm/i915/i915_gem_debug.c b/drivers/gpu/drm/i915/i915_gem_debug.c
index 8d0b943..e602614 100644
--- a/drivers/gpu/drm/i915/i915_gem_debug.c
+++ b/drivers/gpu/drm/i915/i915_gem_debug.c
@@ -87,7 +87,7 @@
chunk_len = page_len - chunk;
if (chunk_len > 128)
chunk_len = 128;
- i915_gem_dump_page(obj_priv->page_list[page],
+ i915_gem_dump_page(obj_priv->pages[page],
chunk, chunk + chunk_len,
obj_priv->gtt_offset +
page * PAGE_SIZE,
@@ -143,7 +143,7 @@
uint32_t *backing_map = NULL;
int bad_count = 0;
- DRM_INFO("%s: checking coherency of object %p@0x%08x (%d, %dkb):\n",
+ DRM_INFO("%s: checking coherency of object %p@0x%08x (%d, %zdkb):\n",
__func__, obj, obj_priv->gtt_offset, handle,
obj->size / 1024);
@@ -157,7 +157,7 @@
for (page = 0; page < obj->size / PAGE_SIZE; page++) {
int i;
- backing_map = kmap_atomic(obj_priv->page_list[page], KM_USER0);
+ backing_map = kmap_atomic(obj_priv->pages[page], KM_USER0);
if (backing_map == NULL) {
DRM_ERROR("failed to map backing page\n");
diff --git a/drivers/gpu/drm/i915/i915_gem_tiling.c b/drivers/gpu/drm/i915/i915_gem_tiling.c
index 5c1ceec..daeae62 100644
--- a/drivers/gpu/drm/i915/i915_gem_tiling.c
+++ b/drivers/gpu/drm/i915/i915_gem_tiling.c
@@ -114,11 +114,13 @@
mchbar_addr = ((u64)temp_hi << 32) | temp_lo;
/* If ACPI doesn't have it, assume we need to allocate it ourselves */
+#ifdef CONFIG_PNP
if (mchbar_addr &&
pnp_range_reserved(mchbar_addr, mchbar_addr + MCHBAR_SIZE)) {
ret = 0;
goto out_put;
}
+#endif
/* Get some space for it */
ret = pci_bus_alloc_resource(bridge_dev->bus, &dev_priv->mch_res,
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index b86b7b7..228546f 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -232,7 +232,17 @@
drm_i915_private_t *dev_priv = container_of(work, drm_i915_private_t,
hotplug_work);
struct drm_device *dev = dev_priv->dev;
+ struct drm_mode_config *mode_config = &dev->mode_config;
+ struct drm_connector *connector;
+ if (mode_config->num_connector) {
+ list_for_each_entry(connector, &mode_config->connector_list, head) {
+ struct intel_output *intel_output = to_intel_output(connector);
+
+ if (intel_output->hot_plug)
+ (*intel_output->hot_plug) (intel_output);
+ }
+ }
/* Just fire off a uevent and let userspace tell us what to do */
drm_sysfs_hotplug_event(dev);
}
diff --git a/drivers/gpu/drm/i915/i915_opregion.c b/drivers/gpu/drm/i915/i915_opregion.c
index dc425e7..e4b4e88 100644
--- a/drivers/gpu/drm/i915/i915_opregion.c
+++ b/drivers/gpu/drm/i915/i915_opregion.c
@@ -419,7 +419,7 @@
return;
if (!suspend)
- acpi_video_exit();
+ acpi_video_unregister();
opregion->acpi->drdy = 0;
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index f6237a0..88bf752 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -569,6 +569,19 @@
#define C0DRB3 0x10206
#define C1DRB3 0x10606
+/* Clocking configuration register */
+#define CLKCFG 0x10c00
+#define CLKCFG_FSB_400 (0 << 0) /* hrawclk 100 */
+#define CLKCFG_FSB_533 (1 << 0) /* hrawclk 133 */
+#define CLKCFG_FSB_667 (3 << 0) /* hrawclk 166 */
+#define CLKCFG_FSB_800 (2 << 0) /* hrawclk 200 */
+#define CLKCFG_FSB_1067 (6 << 0) /* hrawclk 266 */
+#define CLKCFG_FSB_1333 (7 << 0) /* hrawclk 333 */
+/* this is a guess, could be 5 as well */
+#define CLKCFG_FSB_1600 (4 << 0) /* hrawclk 400 */
+#define CLKCFG_FSB_1600_ALT (5 << 0) /* hrawclk 400 */
+#define CLKCFG_FSB_MASK (7 << 0)
+
/** GM965 GM45 render standby register */
#define MCHBAR_RENDER_STANDBY 0x111B8
@@ -834,9 +847,25 @@
#define HORIZ_INTERP_MASK (3 << 6)
#define HORIZ_AUTO_SCALE (1 << 5)
#define PANEL_8TO6_DITHER_ENABLE (1 << 3)
+#define PFIT_FILTER_FUZZY (0 << 24)
+#define PFIT_SCALING_AUTO (0 << 26)
+#define PFIT_SCALING_PROGRAMMED (1 << 26)
+#define PFIT_SCALING_PILLAR (2 << 26)
+#define PFIT_SCALING_LETTER (3 << 26)
#define PFIT_PGM_RATIOS 0x61234
#define PFIT_VERT_SCALE_MASK 0xfff00000
#define PFIT_HORIZ_SCALE_MASK 0x0000fff0
+/* Pre-965 */
+#define PFIT_VERT_SCALE_SHIFT 20
+#define PFIT_VERT_SCALE_MASK 0xfff00000
+#define PFIT_HORIZ_SCALE_SHIFT 4
+#define PFIT_HORIZ_SCALE_MASK 0x0000fff0
+/* 965+ */
+#define PFIT_VERT_SCALE_SHIFT_965 16
+#define PFIT_VERT_SCALE_MASK_965 0x1fff0000
+#define PFIT_HORIZ_SCALE_SHIFT_965 0
+#define PFIT_HORIZ_SCALE_MASK_965 0x00001fff
+
#define PFIT_AUTO_RATIOS 0x61238
/* Backlight control */
diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c
index a98e283..8d8e083 100644
--- a/drivers/gpu/drm/i915/i915_suspend.c
+++ b/drivers/gpu/drm/i915/i915_suspend.c
@@ -322,6 +322,20 @@
dev_priv->savePP_OFF_DELAYS = I915_READ(PP_OFF_DELAYS);
dev_priv->savePP_DIVISOR = I915_READ(PP_DIVISOR);
+ /* Display Port state */
+ if (SUPPORTS_INTEGRATED_DP(dev)) {
+ dev_priv->saveDP_B = I915_READ(DP_B);
+ dev_priv->saveDP_C = I915_READ(DP_C);
+ dev_priv->saveDP_D = I915_READ(DP_D);
+ dev_priv->savePIPEA_GMCH_DATA_M = I915_READ(PIPEA_GMCH_DATA_M);
+ dev_priv->savePIPEB_GMCH_DATA_M = I915_READ(PIPEB_GMCH_DATA_M);
+ dev_priv->savePIPEA_GMCH_DATA_N = I915_READ(PIPEA_GMCH_DATA_N);
+ dev_priv->savePIPEB_GMCH_DATA_N = I915_READ(PIPEB_GMCH_DATA_N);
+ dev_priv->savePIPEA_DP_LINK_M = I915_READ(PIPEA_DP_LINK_M);
+ dev_priv->savePIPEB_DP_LINK_M = I915_READ(PIPEB_DP_LINK_M);
+ dev_priv->savePIPEA_DP_LINK_N = I915_READ(PIPEA_DP_LINK_N);
+ dev_priv->savePIPEB_DP_LINK_N = I915_READ(PIPEB_DP_LINK_N);
+ }
/* FIXME: save TV & SDVO state */
/* FBC state */
@@ -404,7 +418,19 @@
for (i = 0; i < 8; i++)
I915_WRITE(FENCE_REG_945_8 + (i * 4), dev_priv->saveFENCE[i+8]);
}
-
+
+ /* Display port ratios (must be done before clock is set) */
+ if (SUPPORTS_INTEGRATED_DP(dev)) {
+ I915_WRITE(PIPEA_GMCH_DATA_M, dev_priv->savePIPEA_GMCH_DATA_M);
+ I915_WRITE(PIPEB_GMCH_DATA_M, dev_priv->savePIPEB_GMCH_DATA_M);
+ I915_WRITE(PIPEA_GMCH_DATA_N, dev_priv->savePIPEA_GMCH_DATA_N);
+ I915_WRITE(PIPEB_GMCH_DATA_N, dev_priv->savePIPEB_GMCH_DATA_N);
+ I915_WRITE(PIPEA_DP_LINK_M, dev_priv->savePIPEA_DP_LINK_M);
+ I915_WRITE(PIPEB_DP_LINK_M, dev_priv->savePIPEB_DP_LINK_M);
+ I915_WRITE(PIPEA_DP_LINK_N, dev_priv->savePIPEA_DP_LINK_N);
+ I915_WRITE(PIPEB_DP_LINK_N, dev_priv->savePIPEB_DP_LINK_N);
+ }
+
/* Pipe & plane A info */
/* Prime the clock */
if (dev_priv->saveDPLL_A & DPLL_VCO_ENABLE) {
@@ -518,6 +544,12 @@
I915_WRITE(PP_DIVISOR, dev_priv->savePP_DIVISOR);
I915_WRITE(PP_CONTROL, dev_priv->savePP_CONTROL);
+ /* Display Port state */
+ if (SUPPORTS_INTEGRATED_DP(dev)) {
+ I915_WRITE(DP_B, dev_priv->saveDP_B);
+ I915_WRITE(DP_C, dev_priv->saveDP_C);
+ I915_WRITE(DP_D, dev_priv->saveDP_D);
+ }
/* FIXME: restore TV & SDVO state */
/* FBC info */
diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c
index cdd126d..716409a 100644
--- a/drivers/gpu/drm/i915/intel_bios.c
+++ b/drivers/gpu/drm/i915/intel_bios.c
@@ -99,9 +99,11 @@
{
struct bdb_lvds_options *lvds_options;
struct bdb_lvds_lfp_data *lvds_lfp_data;
+ struct bdb_lvds_lfp_data_ptrs *lvds_lfp_data_ptrs;
struct bdb_lvds_lfp_data_entry *entry;
struct lvds_dvo_timing *dvo_timing;
struct drm_display_mode *panel_fixed_mode;
+ int lfp_data_size;
/* Defaults if we can't find VBT info */
dev_priv->lvds_dither = 0;
@@ -119,9 +121,17 @@
if (!lvds_lfp_data)
return;
+ lvds_lfp_data_ptrs = find_section(bdb, BDB_LVDS_LFP_DATA_PTRS);
+ if (!lvds_lfp_data_ptrs)
+ return;
+
dev_priv->lvds_vbt = 1;
- entry = &lvds_lfp_data->data[lvds_options->panel_type];
+ lfp_data_size = lvds_lfp_data_ptrs->ptr[1].dvo_timing_offset -
+ lvds_lfp_data_ptrs->ptr[0].dvo_timing_offset;
+ entry = (struct bdb_lvds_lfp_data_entry *)
+ ((uint8_t *)lvds_lfp_data->data + (lfp_data_size *
+ lvds_options->panel_type));
dvo_timing = &entry->dvo_timing;
panel_fixed_mode = kzalloc(sizeof(*panel_fixed_mode), GFP_KERNEL);
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 3e1c781..73e7b9c 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -29,6 +29,7 @@
#include "intel_drv.h"
#include "i915_drm.h"
#include "i915_drv.h"
+#include "intel_dp.h"
#include "drm_crtc_helper.h"
@@ -127,19 +128,6 @@
#define I9XX_P2_LVDS_FAST 7
#define I9XX_P2_LVDS_SLOW_LIMIT 112000
-#define INTEL_LIMIT_I8XX_DVO_DAC 0
-#define INTEL_LIMIT_I8XX_LVDS 1
-#define INTEL_LIMIT_I9XX_SDVO_DAC 2
-#define INTEL_LIMIT_I9XX_LVDS 3
-#define INTEL_LIMIT_G4X_SDVO 4
-#define INTEL_LIMIT_G4X_HDMI_DAC 5
-#define INTEL_LIMIT_G4X_SINGLE_CHANNEL_LVDS 6
-#define INTEL_LIMIT_G4X_DUAL_CHANNEL_LVDS 7
-#define INTEL_LIMIT_IGD_SDVO_DAC 8
-#define INTEL_LIMIT_IGD_LVDS 9
-#define INTEL_LIMIT_IGDNG_SDVO_DAC 10
-#define INTEL_LIMIT_IGDNG_LVDS 11
-
/*The parameter is for SDVO on G4x platform*/
#define G4X_DOT_SDVO_MIN 25000
#define G4X_DOT_SDVO_MAX 270000
@@ -218,6 +206,25 @@
#define G4X_P2_DUAL_CHANNEL_LVDS_FAST 7
#define G4X_P2_DUAL_CHANNEL_LVDS_LIMIT 0
+/*The parameter is for DISPLAY PORT on G4x platform*/
+#define G4X_DOT_DISPLAY_PORT_MIN 161670
+#define G4X_DOT_DISPLAY_PORT_MAX 227000
+#define G4X_N_DISPLAY_PORT_MIN 1
+#define G4X_N_DISPLAY_PORT_MAX 2
+#define G4X_M_DISPLAY_PORT_MIN 97
+#define G4X_M_DISPLAY_PORT_MAX 108
+#define G4X_M1_DISPLAY_PORT_MIN 0x10
+#define G4X_M1_DISPLAY_PORT_MAX 0x12
+#define G4X_M2_DISPLAY_PORT_MIN 0x05
+#define G4X_M2_DISPLAY_PORT_MAX 0x06
+#define G4X_P_DISPLAY_PORT_MIN 10
+#define G4X_P_DISPLAY_PORT_MAX 20
+#define G4X_P1_DISPLAY_PORT_MIN 1
+#define G4X_P1_DISPLAY_PORT_MAX 2
+#define G4X_P2_DISPLAY_PORT_SLOW 10
+#define G4X_P2_DISPLAY_PORT_FAST 10
+#define G4X_P2_DISPLAY_PORT_LIMIT 0
+
/* IGDNG */
/* as we calculate clock using (register_value + 2) for
N/M1/M2, so here the range value for them is (actual_value-2).
@@ -256,8 +263,11 @@
intel_igdng_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
int target, int refclk, intel_clock_t *best_clock);
-static const intel_limit_t intel_limits[] = {
- { /* INTEL_LIMIT_I8XX_DVO_DAC */
+static bool
+intel_find_pll_g4x_dp(const intel_limit_t *, struct drm_crtc *crtc,
+ int target, int refclk, intel_clock_t *best_clock);
+
+static const intel_limit_t intel_limits_i8xx_dvo = {
.dot = { .min = I8XX_DOT_MIN, .max = I8XX_DOT_MAX },
.vco = { .min = I8XX_VCO_MIN, .max = I8XX_VCO_MAX },
.n = { .min = I8XX_N_MIN, .max = I8XX_N_MAX },
@@ -269,8 +279,9 @@
.p2 = { .dot_limit = I8XX_P2_SLOW_LIMIT,
.p2_slow = I8XX_P2_SLOW, .p2_fast = I8XX_P2_FAST },
.find_pll = intel_find_best_PLL,
- },
- { /* INTEL_LIMIT_I8XX_LVDS */
+};
+
+static const intel_limit_t intel_limits_i8xx_lvds = {
.dot = { .min = I8XX_DOT_MIN, .max = I8XX_DOT_MAX },
.vco = { .min = I8XX_VCO_MIN, .max = I8XX_VCO_MAX },
.n = { .min = I8XX_N_MIN, .max = I8XX_N_MAX },
@@ -282,8 +293,9 @@
.p2 = { .dot_limit = I8XX_P2_SLOW_LIMIT,
.p2_slow = I8XX_P2_LVDS_SLOW, .p2_fast = I8XX_P2_LVDS_FAST },
.find_pll = intel_find_best_PLL,
- },
- { /* INTEL_LIMIT_I9XX_SDVO_DAC */
+};
+
+static const intel_limit_t intel_limits_i9xx_sdvo = {
.dot = { .min = I9XX_DOT_MIN, .max = I9XX_DOT_MAX },
.vco = { .min = I9XX_VCO_MIN, .max = I9XX_VCO_MAX },
.n = { .min = I9XX_N_MIN, .max = I9XX_N_MAX },
@@ -295,8 +307,9 @@
.p2 = { .dot_limit = I9XX_P2_SDVO_DAC_SLOW_LIMIT,
.p2_slow = I9XX_P2_SDVO_DAC_SLOW, .p2_fast = I9XX_P2_SDVO_DAC_FAST },
.find_pll = intel_find_best_PLL,
- },
- { /* INTEL_LIMIT_I9XX_LVDS */
+};
+
+static const intel_limit_t intel_limits_i9xx_lvds = {
.dot = { .min = I9XX_DOT_MIN, .max = I9XX_DOT_MAX },
.vco = { .min = I9XX_VCO_MIN, .max = I9XX_VCO_MAX },
.n = { .min = I9XX_N_MIN, .max = I9XX_N_MAX },
@@ -311,9 +324,10 @@
.p2 = { .dot_limit = I9XX_P2_LVDS_SLOW_LIMIT,
.p2_slow = I9XX_P2_LVDS_SLOW, .p2_fast = I9XX_P2_LVDS_FAST },
.find_pll = intel_find_best_PLL,
- },
+};
+
/* below parameter and function is for G4X Chipset Family*/
- { /* INTEL_LIMIT_G4X_SDVO */
+static const intel_limit_t intel_limits_g4x_sdvo = {
.dot = { .min = G4X_DOT_SDVO_MIN, .max = G4X_DOT_SDVO_MAX },
.vco = { .min = G4X_VCO_MIN, .max = G4X_VCO_MAX},
.n = { .min = G4X_N_SDVO_MIN, .max = G4X_N_SDVO_MAX },
@@ -327,8 +341,9 @@
.p2_fast = G4X_P2_SDVO_FAST
},
.find_pll = intel_g4x_find_best_PLL,
- },
- { /* INTEL_LIMIT_G4X_HDMI_DAC */
+};
+
+static const intel_limit_t intel_limits_g4x_hdmi = {
.dot = { .min = G4X_DOT_HDMI_DAC_MIN, .max = G4X_DOT_HDMI_DAC_MAX },
.vco = { .min = G4X_VCO_MIN, .max = G4X_VCO_MAX},
.n = { .min = G4X_N_HDMI_DAC_MIN, .max = G4X_N_HDMI_DAC_MAX },
@@ -342,8 +357,9 @@
.p2_fast = G4X_P2_HDMI_DAC_FAST
},
.find_pll = intel_g4x_find_best_PLL,
- },
- { /* INTEL_LIMIT_G4X_SINGLE_CHANNEL_LVDS */
+};
+
+static const intel_limit_t intel_limits_g4x_single_channel_lvds = {
.dot = { .min = G4X_DOT_SINGLE_CHANNEL_LVDS_MIN,
.max = G4X_DOT_SINGLE_CHANNEL_LVDS_MAX },
.vco = { .min = G4X_VCO_MIN,
@@ -365,8 +381,9 @@
.p2_fast = G4X_P2_SINGLE_CHANNEL_LVDS_FAST
},
.find_pll = intel_g4x_find_best_PLL,
- },
- { /* INTEL_LIMIT_G4X_DUAL_CHANNEL_LVDS */
+};
+
+static const intel_limit_t intel_limits_g4x_dual_channel_lvds = {
.dot = { .min = G4X_DOT_DUAL_CHANNEL_LVDS_MIN,
.max = G4X_DOT_DUAL_CHANNEL_LVDS_MAX },
.vco = { .min = G4X_VCO_MIN,
@@ -388,8 +405,32 @@
.p2_fast = G4X_P2_DUAL_CHANNEL_LVDS_FAST
},
.find_pll = intel_g4x_find_best_PLL,
- },
- { /* INTEL_LIMIT_IGD_SDVO */
+};
+
+static const intel_limit_t intel_limits_g4x_display_port = {
+ .dot = { .min = G4X_DOT_DISPLAY_PORT_MIN,
+ .max = G4X_DOT_DISPLAY_PORT_MAX },
+ .vco = { .min = G4X_VCO_MIN,
+ .max = G4X_VCO_MAX},
+ .n = { .min = G4X_N_DISPLAY_PORT_MIN,
+ .max = G4X_N_DISPLAY_PORT_MAX },
+ .m = { .min = G4X_M_DISPLAY_PORT_MIN,
+ .max = G4X_M_DISPLAY_PORT_MAX },
+ .m1 = { .min = G4X_M1_DISPLAY_PORT_MIN,
+ .max = G4X_M1_DISPLAY_PORT_MAX },
+ .m2 = { .min = G4X_M2_DISPLAY_PORT_MIN,
+ .max = G4X_M2_DISPLAY_PORT_MAX },
+ .p = { .min = G4X_P_DISPLAY_PORT_MIN,
+ .max = G4X_P_DISPLAY_PORT_MAX },
+ .p1 = { .min = G4X_P1_DISPLAY_PORT_MIN,
+ .max = G4X_P1_DISPLAY_PORT_MAX},
+ .p2 = { .dot_limit = G4X_P2_DISPLAY_PORT_LIMIT,
+ .p2_slow = G4X_P2_DISPLAY_PORT_SLOW,
+ .p2_fast = G4X_P2_DISPLAY_PORT_FAST },
+ .find_pll = intel_find_pll_g4x_dp,
+};
+
+static const intel_limit_t intel_limits_igd_sdvo = {
.dot = { .min = I9XX_DOT_MIN, .max = I9XX_DOT_MAX},
.vco = { .min = IGD_VCO_MIN, .max = IGD_VCO_MAX },
.n = { .min = IGD_N_MIN, .max = IGD_N_MAX },
@@ -401,8 +442,9 @@
.p2 = { .dot_limit = I9XX_P2_SDVO_DAC_SLOW_LIMIT,
.p2_slow = I9XX_P2_SDVO_DAC_SLOW, .p2_fast = I9XX_P2_SDVO_DAC_FAST },
.find_pll = intel_find_best_PLL,
- },
- { /* INTEL_LIMIT_IGD_LVDS */
+};
+
+static const intel_limit_t intel_limits_igd_lvds = {
.dot = { .min = I9XX_DOT_MIN, .max = I9XX_DOT_MAX },
.vco = { .min = IGD_VCO_MIN, .max = IGD_VCO_MAX },
.n = { .min = IGD_N_MIN, .max = IGD_N_MAX },
@@ -415,8 +457,9 @@
.p2 = { .dot_limit = I9XX_P2_LVDS_SLOW_LIMIT,
.p2_slow = I9XX_P2_LVDS_SLOW, .p2_fast = I9XX_P2_LVDS_SLOW },
.find_pll = intel_find_best_PLL,
- },
- { /* INTEL_LIMIT_IGDNG_SDVO_DAC */
+};
+
+static const intel_limit_t intel_limits_igdng_sdvo = {
.dot = { .min = IGDNG_DOT_MIN, .max = IGDNG_DOT_MAX },
.vco = { .min = IGDNG_VCO_MIN, .max = IGDNG_VCO_MAX },
.n = { .min = IGDNG_N_MIN, .max = IGDNG_N_MAX },
@@ -429,8 +472,9 @@
.p2_slow = IGDNG_P2_SDVO_DAC_SLOW,
.p2_fast = IGDNG_P2_SDVO_DAC_FAST },
.find_pll = intel_igdng_find_best_PLL,
- },
- { /* INTEL_LIMIT_IGDNG_LVDS */
+};
+
+static const intel_limit_t intel_limits_igdng_lvds = {
.dot = { .min = IGDNG_DOT_MIN, .max = IGDNG_DOT_MAX },
.vco = { .min = IGDNG_VCO_MIN, .max = IGDNG_VCO_MAX },
.n = { .min = IGDNG_N_MIN, .max = IGDNG_N_MAX },
@@ -443,16 +487,15 @@
.p2_slow = IGDNG_P2_LVDS_SLOW,
.p2_fast = IGDNG_P2_LVDS_FAST },
.find_pll = intel_igdng_find_best_PLL,
- },
};
static const intel_limit_t *intel_igdng_limit(struct drm_crtc *crtc)
{
const intel_limit_t *limit;
if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
- limit = &intel_limits[INTEL_LIMIT_IGDNG_LVDS];
+ limit = &intel_limits_igdng_lvds;
else
- limit = &intel_limits[INTEL_LIMIT_IGDNG_SDVO_DAC];
+ limit = &intel_limits_igdng_sdvo;
return limit;
}
@@ -467,19 +510,19 @@
if ((I915_READ(LVDS) & LVDS_CLKB_POWER_MASK) ==
LVDS_CLKB_POWER_UP)
/* LVDS with dual channel */
- limit = &intel_limits
- [INTEL_LIMIT_G4X_DUAL_CHANNEL_LVDS];
+ limit = &intel_limits_g4x_dual_channel_lvds;
else
/* LVDS with dual channel */
- limit = &intel_limits
- [INTEL_LIMIT_G4X_SINGLE_CHANNEL_LVDS];
+ limit = &intel_limits_g4x_single_channel_lvds;
} else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI) ||
intel_pipe_has_type(crtc, INTEL_OUTPUT_ANALOG)) {
- limit = &intel_limits[INTEL_LIMIT_G4X_HDMI_DAC];
+ limit = &intel_limits_g4x_hdmi;
} else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO)) {
- limit = &intel_limits[INTEL_LIMIT_G4X_SDVO];
+ limit = &intel_limits_g4x_sdvo;
+ } else if (intel_pipe_has_type (crtc, INTEL_OUTPUT_DISPLAYPORT)) {
+ limit = &intel_limits_g4x_display_port;
} else /* The option is for other outputs */
- limit = &intel_limits[INTEL_LIMIT_I9XX_SDVO_DAC];
+ limit = &intel_limits_i9xx_sdvo;
return limit;
}
@@ -495,19 +538,19 @@
limit = intel_g4x_limit(crtc);
} else if (IS_I9XX(dev) && !IS_IGD(dev)) {
if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
- limit = &intel_limits[INTEL_LIMIT_I9XX_LVDS];
+ limit = &intel_limits_i9xx_lvds;
else
- limit = &intel_limits[INTEL_LIMIT_I9XX_SDVO_DAC];
+ limit = &intel_limits_i9xx_sdvo;
} else if (IS_IGD(dev)) {
if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
- limit = &intel_limits[INTEL_LIMIT_IGD_LVDS];
+ limit = &intel_limits_igd_lvds;
else
- limit = &intel_limits[INTEL_LIMIT_IGD_SDVO_DAC];
+ limit = &intel_limits_igd_sdvo;
} else {
if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
- limit = &intel_limits[INTEL_LIMIT_I8XX_LVDS];
+ limit = &intel_limits_i8xx_lvds;
else
- limit = &intel_limits[INTEL_LIMIT_I8XX_DVO_DAC];
+ limit = &intel_limits_i8xx_dvo;
}
return limit;
}
@@ -764,6 +807,35 @@
return found;
}
+/* DisplayPort has only two frequencies, 162MHz and 270MHz */
+static bool
+intel_find_pll_g4x_dp(const intel_limit_t *limit, struct drm_crtc *crtc,
+ int target, int refclk, intel_clock_t *best_clock)
+{
+ intel_clock_t clock;
+ if (target < 200000) {
+ clock.dot = 161670;
+ clock.p = 20;
+ clock.p1 = 2;
+ clock.p2 = 10;
+ clock.n = 0x01;
+ clock.m = 97;
+ clock.m1 = 0x10;
+ clock.m2 = 0x05;
+ } else {
+ clock.dot = 270000;
+ clock.p = 10;
+ clock.p1 = 1;
+ clock.p2 = 10;
+ clock.n = 0x02;
+ clock.m = 108;
+ clock.m1 = 0x12;
+ clock.m2 = 0x06;
+ }
+ memcpy(best_clock, &clock, sizeof(intel_clock_t));
+ return true;
+}
+
void
intel_wait_for_vblank(struct drm_device *dev)
{
@@ -1541,7 +1613,7 @@
intel_clock_t clock;
u32 dpll = 0, fp = 0, dspcntr, pipeconf;
bool ok, is_sdvo = false, is_dvo = false;
- bool is_crt = false, is_lvds = false, is_tv = false;
+ bool is_crt = false, is_lvds = false, is_tv = false, is_dp = false;
struct drm_mode_config *mode_config = &dev->mode_config;
struct drm_connector *connector;
const intel_limit_t *limit;
@@ -1585,6 +1657,9 @@
case INTEL_OUTPUT_ANALOG:
is_crt = true;
break;
+ case INTEL_OUTPUT_DISPLAYPORT:
+ is_dp = true;
+ break;
}
num_outputs++;
@@ -1600,6 +1675,7 @@
} else {
refclk = 48000;
}
+
/*
* Returns a set of divisors for the desired target clock with the given
@@ -1662,6 +1738,8 @@
else if (IS_IGDNG(dev))
dpll |= (sdvo_pixel_multiply - 1) << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT;
}
+ if (is_dp)
+ dpll |= DPLL_DVO_HIGH_SPEED;
/* compute bitmask from p1 value */
if (IS_IGD(dev))
@@ -1809,6 +1887,8 @@
I915_WRITE(lvds_reg, lvds);
I915_READ(lvds_reg);
}
+ if (is_dp)
+ intel_dp_set_m_n(crtc, mode, adjusted_mode);
I915_WRITE(fp_reg, fp);
I915_WRITE(dpll_reg, dpll);
@@ -2475,6 +2555,8 @@
found = intel_sdvo_init(dev, SDVOB);
if (!found && SUPPORTS_INTEGRATED_HDMI(dev))
intel_hdmi_init(dev, SDVOB);
+ if (!found && SUPPORTS_INTEGRATED_DP(dev))
+ intel_dp_init(dev, DP_B);
}
/* Before G4X SDVOC doesn't have its own detect register */
@@ -2487,7 +2569,11 @@
found = intel_sdvo_init(dev, SDVOC);
if (!found && SUPPORTS_INTEGRATED_HDMI(dev))
intel_hdmi_init(dev, SDVOC);
+ if (!found && SUPPORTS_INTEGRATED_DP(dev))
+ intel_dp_init(dev, DP_C);
}
+ if (SUPPORTS_INTEGRATED_DP(dev) && (I915_READ(DP_D) & DP_DETECTED))
+ intel_dp_init(dev, DP_D);
} else
intel_dvo_init(dev);
@@ -2530,6 +2616,11 @@
(1 << 1));
clone_mask = (1 << INTEL_OUTPUT_TVOUT);
break;
+ case INTEL_OUTPUT_DISPLAYPORT:
+ crtc_mask = ((1 << 0) |
+ (1 << 1));
+ clone_mask = (1 << INTEL_OUTPUT_DISPLAYPORT);
+ break;
}
encoder->possible_crtcs = crtc_mask;
encoder->possible_clones = intel_connector_clones(dev, clone_mask);
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
new file mode 100644
index 0000000..8f8d37d
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -0,0 +1,1153 @@
+/*
+ * Copyright © 2008 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ * Authors:
+ * Keith Packard <keithp@keithp.com>
+ *
+ */
+
+#include <linux/i2c.h>
+#include "drmP.h"
+#include "drm.h"
+#include "drm_crtc.h"
+#include "drm_crtc_helper.h"
+#include "intel_drv.h"
+#include "i915_drm.h"
+#include "i915_drv.h"
+#include "intel_dp.h"
+
+#define DP_LINK_STATUS_SIZE 6
+#define DP_LINK_CHECK_TIMEOUT (10 * 1000)
+
+#define DP_LINK_CONFIGURATION_SIZE 9
+
+struct intel_dp_priv {
+ uint32_t output_reg;
+ uint32_t DP;
+ uint8_t link_configuration[DP_LINK_CONFIGURATION_SIZE];
+ uint32_t save_DP;
+ uint8_t save_link_configuration[DP_LINK_CONFIGURATION_SIZE];
+ bool has_audio;
+ int dpms_mode;
+ uint8_t link_bw;
+ uint8_t lane_count;
+ uint8_t dpcd[4];
+ struct intel_output *intel_output;
+ struct i2c_adapter adapter;
+ struct i2c_algo_dp_aux_data algo;
+};
+
+static void
+intel_dp_link_train(struct intel_output *intel_output, uint32_t DP,
+ uint8_t link_configuration[DP_LINK_CONFIGURATION_SIZE]);
+
+static void
+intel_dp_link_down(struct intel_output *intel_output, uint32_t DP);
+
+static int
+intel_dp_max_lane_count(struct intel_output *intel_output)
+{
+ struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+ int max_lane_count = 4;
+
+ if (dp_priv->dpcd[0] >= 0x11) {
+ max_lane_count = dp_priv->dpcd[2] & 0x1f;
+ switch (max_lane_count) {
+ case 1: case 2: case 4:
+ break;
+ default:
+ max_lane_count = 4;
+ }
+ }
+ return max_lane_count;
+}
+
+static int
+intel_dp_max_link_bw(struct intel_output *intel_output)
+{
+ struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+ int max_link_bw = dp_priv->dpcd[1];
+
+ switch (max_link_bw) {
+ case DP_LINK_BW_1_62:
+ case DP_LINK_BW_2_7:
+ break;
+ default:
+ max_link_bw = DP_LINK_BW_1_62;
+ break;
+ }
+ return max_link_bw;
+}
+
+static int
+intel_dp_link_clock(uint8_t link_bw)
+{
+ if (link_bw == DP_LINK_BW_2_7)
+ return 270000;
+ else
+ return 162000;
+}
+
+/* I think this is a fiction */
+static int
+intel_dp_link_required(int pixel_clock)
+{
+ return pixel_clock * 3;
+}
+
+static int
+intel_dp_mode_valid(struct drm_connector *connector,
+ struct drm_display_mode *mode)
+{
+ struct intel_output *intel_output = to_intel_output(connector);
+ int max_link_clock = intel_dp_link_clock(intel_dp_max_link_bw(intel_output));
+ int max_lanes = intel_dp_max_lane_count(intel_output);
+
+ if (intel_dp_link_required(mode->clock) > max_link_clock * max_lanes)
+ return MODE_CLOCK_HIGH;
+
+ if (mode->clock < 10000)
+ return MODE_CLOCK_LOW;
+
+ return MODE_OK;
+}
+
+static uint32_t
+pack_aux(uint8_t *src, int src_bytes)
+{
+ int i;
+ uint32_t v = 0;
+
+ if (src_bytes > 4)
+ src_bytes = 4;
+ for (i = 0; i < src_bytes; i++)
+ v |= ((uint32_t) src[i]) << ((3-i) * 8);
+ return v;
+}
+
+static void
+unpack_aux(uint32_t src, uint8_t *dst, int dst_bytes)
+{
+ int i;
+ if (dst_bytes > 4)
+ dst_bytes = 4;
+ for (i = 0; i < dst_bytes; i++)
+ dst[i] = src >> ((3-i) * 8);
+}
+
+/* hrawclock is 1/4 the FSB frequency */
+static int
+intel_hrawclk(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ uint32_t clkcfg;
+
+ clkcfg = I915_READ(CLKCFG);
+ switch (clkcfg & CLKCFG_FSB_MASK) {
+ case CLKCFG_FSB_400:
+ return 100;
+ case CLKCFG_FSB_533:
+ return 133;
+ case CLKCFG_FSB_667:
+ return 166;
+ case CLKCFG_FSB_800:
+ return 200;
+ case CLKCFG_FSB_1067:
+ return 266;
+ case CLKCFG_FSB_1333:
+ return 333;
+ /* these two are just a guess; one of them might be right */
+ case CLKCFG_FSB_1600:
+ case CLKCFG_FSB_1600_ALT:
+ return 400;
+ default:
+ return 133;
+ }
+}
+
+static int
+intel_dp_aux_ch(struct intel_output *intel_output,
+ uint8_t *send, int send_bytes,
+ uint8_t *recv, int recv_size)
+{
+ struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+ uint32_t output_reg = dp_priv->output_reg;
+ struct drm_device *dev = intel_output->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ uint32_t ch_ctl = output_reg + 0x10;
+ uint32_t ch_data = ch_ctl + 4;
+ int i;
+ int recv_bytes;
+ uint32_t ctl;
+ uint32_t status;
+ uint32_t aux_clock_divider;
+ int try;
+
+ /* The clock divider is based off the hrawclk,
+ * and would like to run at 2MHz. So, take the
+ * hrawclk value and divide by 2 and use that
+ */
+ aux_clock_divider = intel_hrawclk(dev) / 2;
+ /* Must try at least 3 times according to DP spec */
+ for (try = 0; try < 5; try++) {
+ /* Load the send data into the aux channel data registers */
+ for (i = 0; i < send_bytes; i += 4) {
+ uint32_t d = pack_aux(send + i, send_bytes - i);;
+
+ I915_WRITE(ch_data + i, d);
+ }
+
+ ctl = (DP_AUX_CH_CTL_SEND_BUSY |
+ DP_AUX_CH_CTL_TIME_OUT_400us |
+ (send_bytes << DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT) |
+ (5 << DP_AUX_CH_CTL_PRECHARGE_2US_SHIFT) |
+ (aux_clock_divider << DP_AUX_CH_CTL_BIT_CLOCK_2X_SHIFT) |
+ DP_AUX_CH_CTL_DONE |
+ DP_AUX_CH_CTL_TIME_OUT_ERROR |
+ DP_AUX_CH_CTL_RECEIVE_ERROR);
+
+ /* Send the command and wait for it to complete */
+ I915_WRITE(ch_ctl, ctl);
+ (void) I915_READ(ch_ctl);
+ for (;;) {
+ udelay(100);
+ status = I915_READ(ch_ctl);
+ if ((status & DP_AUX_CH_CTL_SEND_BUSY) == 0)
+ break;
+ }
+
+ /* Clear done status and any errors */
+ I915_WRITE(ch_ctl, (ctl |
+ DP_AUX_CH_CTL_DONE |
+ DP_AUX_CH_CTL_TIME_OUT_ERROR |
+ DP_AUX_CH_CTL_RECEIVE_ERROR));
+ (void) I915_READ(ch_ctl);
+ if ((status & DP_AUX_CH_CTL_TIME_OUT_ERROR) == 0)
+ break;
+ }
+
+ if ((status & DP_AUX_CH_CTL_DONE) == 0) {
+ printk(KERN_ERR "dp_aux_ch not done status 0x%08x\n", status);
+ return -EBUSY;
+ }
+
+ /* Check for timeout or receive error.
+ * Timeouts occur when the sink is not connected
+ */
+ if (status & DP_AUX_CH_CTL_RECEIVE_ERROR) {
+ printk(KERN_ERR "dp_aux_ch receive error status 0x%08x\n", status);
+ return -EIO;
+ }
+ if (status & DP_AUX_CH_CTL_TIME_OUT_ERROR) {
+ printk(KERN_ERR "dp_aux_ch timeout status 0x%08x\n", status);
+ return -ETIMEDOUT;
+ }
+
+ /* Unload any bytes sent back from the other side */
+ recv_bytes = ((status & DP_AUX_CH_CTL_MESSAGE_SIZE_MASK) >>
+ DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT);
+
+ if (recv_bytes > recv_size)
+ recv_bytes = recv_size;
+
+ for (i = 0; i < recv_bytes; i += 4) {
+ uint32_t d = I915_READ(ch_data + i);
+
+ unpack_aux(d, recv + i, recv_bytes - i);
+ }
+
+ return recv_bytes;
+}
+
+/* Write data to the aux channel in native mode */
+static int
+intel_dp_aux_native_write(struct intel_output *intel_output,
+ uint16_t address, uint8_t *send, int send_bytes)
+{
+ int ret;
+ uint8_t msg[20];
+ int msg_bytes;
+ uint8_t ack;
+
+ if (send_bytes > 16)
+ return -1;
+ msg[0] = AUX_NATIVE_WRITE << 4;
+ msg[1] = address >> 8;
+ msg[2] = address;
+ msg[3] = send_bytes - 1;
+ memcpy(&msg[4], send, send_bytes);
+ msg_bytes = send_bytes + 4;
+ for (;;) {
+ ret = intel_dp_aux_ch(intel_output, msg, msg_bytes, &ack, 1);
+ if (ret < 0)
+ return ret;
+ if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_ACK)
+ break;
+ else if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_DEFER)
+ udelay(100);
+ else
+ return -EIO;
+ }
+ return send_bytes;
+}
+
+/* Write a single byte to the aux channel in native mode */
+static int
+intel_dp_aux_native_write_1(struct intel_output *intel_output,
+ uint16_t address, uint8_t byte)
+{
+ return intel_dp_aux_native_write(intel_output, address, &byte, 1);
+}
+
+/* read bytes from a native aux channel */
+static int
+intel_dp_aux_native_read(struct intel_output *intel_output,
+ uint16_t address, uint8_t *recv, int recv_bytes)
+{
+ uint8_t msg[4];
+ int msg_bytes;
+ uint8_t reply[20];
+ int reply_bytes;
+ uint8_t ack;
+ int ret;
+
+ msg[0] = AUX_NATIVE_READ << 4;
+ msg[1] = address >> 8;
+ msg[2] = address & 0xff;
+ msg[3] = recv_bytes - 1;
+
+ msg_bytes = 4;
+ reply_bytes = recv_bytes + 1;
+
+ for (;;) {
+ ret = intel_dp_aux_ch(intel_output, msg, msg_bytes,
+ reply, reply_bytes);
+ if (ret == 0)
+ return -EPROTO;
+ if (ret < 0)
+ return ret;
+ ack = reply[0];
+ if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_ACK) {
+ memcpy(recv, reply + 1, ret - 1);
+ return ret - 1;
+ }
+ else if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_DEFER)
+ udelay(100);
+ else
+ return -EIO;
+ }
+}
+
+static int
+intel_dp_i2c_aux_ch(struct i2c_adapter *adapter,
+ uint8_t *send, int send_bytes,
+ uint8_t *recv, int recv_bytes)
+{
+ struct intel_dp_priv *dp_priv = container_of(adapter,
+ struct intel_dp_priv,
+ adapter);
+ struct intel_output *intel_output = dp_priv->intel_output;
+
+ return intel_dp_aux_ch(intel_output,
+ send, send_bytes, recv, recv_bytes);
+}
+
+static int
+intel_dp_i2c_init(struct intel_output *intel_output, const char *name)
+{
+ struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+
+ DRM_ERROR("i2c_init %s\n", name);
+ dp_priv->algo.running = false;
+ dp_priv->algo.address = 0;
+ dp_priv->algo.aux_ch = intel_dp_i2c_aux_ch;
+
+ memset(&dp_priv->adapter, '\0', sizeof (dp_priv->adapter));
+ dp_priv->adapter.owner = THIS_MODULE;
+ dp_priv->adapter.class = I2C_CLASS_DDC;
+ strncpy (dp_priv->adapter.name, name, sizeof dp_priv->adapter.name - 1);
+ dp_priv->adapter.name[sizeof dp_priv->adapter.name - 1] = '\0';
+ dp_priv->adapter.algo_data = &dp_priv->algo;
+ dp_priv->adapter.dev.parent = &intel_output->base.kdev;
+
+ return i2c_dp_aux_add_bus(&dp_priv->adapter);
+}
+
+static bool
+intel_dp_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ struct intel_output *intel_output = enc_to_intel_output(encoder);
+ struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+ int lane_count, clock;
+ int max_lane_count = intel_dp_max_lane_count(intel_output);
+ int max_clock = intel_dp_max_link_bw(intel_output) == DP_LINK_BW_2_7 ? 1 : 0;
+ static int bws[2] = { DP_LINK_BW_1_62, DP_LINK_BW_2_7 };
+
+ for (lane_count = 1; lane_count <= max_lane_count; lane_count <<= 1) {
+ for (clock = 0; clock <= max_clock; clock++) {
+ int link_avail = intel_dp_link_clock(bws[clock]) * lane_count;
+
+ if (intel_dp_link_required(mode->clock) <= link_avail) {
+ dp_priv->link_bw = bws[clock];
+ dp_priv->lane_count = lane_count;
+ adjusted_mode->clock = intel_dp_link_clock(dp_priv->link_bw);
+ printk(KERN_ERR "link bw %02x lane count %d clock %d\n",
+ dp_priv->link_bw, dp_priv->lane_count,
+ adjusted_mode->clock);
+ return true;
+ }
+ }
+ }
+ return false;
+}
+
+struct intel_dp_m_n {
+ uint32_t tu;
+ uint32_t gmch_m;
+ uint32_t gmch_n;
+ uint32_t link_m;
+ uint32_t link_n;
+};
+
+static void
+intel_reduce_ratio(uint32_t *num, uint32_t *den)
+{
+ while (*num > 0xffffff || *den > 0xffffff) {
+ *num >>= 1;
+ *den >>= 1;
+ }
+}
+
+static void
+intel_dp_compute_m_n(int bytes_per_pixel,
+ int nlanes,
+ int pixel_clock,
+ int link_clock,
+ struct intel_dp_m_n *m_n)
+{
+ m_n->tu = 64;
+ m_n->gmch_m = pixel_clock * bytes_per_pixel;
+ m_n->gmch_n = link_clock * nlanes;
+ intel_reduce_ratio(&m_n->gmch_m, &m_n->gmch_n);
+ m_n->link_m = pixel_clock;
+ m_n->link_n = link_clock;
+ intel_reduce_ratio(&m_n->link_m, &m_n->link_n);
+}
+
+void
+intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_mode_config *mode_config = &dev->mode_config;
+ struct drm_connector *connector;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ int lane_count = 4;
+ struct intel_dp_m_n m_n;
+
+ /*
+ * Find the lane count in the intel_output private
+ */
+ list_for_each_entry(connector, &mode_config->connector_list, head) {
+ struct intel_output *intel_output = to_intel_output(connector);
+ struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+
+ if (!connector->encoder || connector->encoder->crtc != crtc)
+ continue;
+
+ if (intel_output->type == INTEL_OUTPUT_DISPLAYPORT) {
+ lane_count = dp_priv->lane_count;
+ break;
+ }
+ }
+
+ /*
+ * Compute the GMCH and Link ratios. The '3' here is
+ * the number of bytes_per_pixel post-LUT, which we always
+ * set up for 8-bits of R/G/B, or 3 bytes total.
+ */
+ intel_dp_compute_m_n(3, lane_count,
+ mode->clock, adjusted_mode->clock, &m_n);
+
+ if (intel_crtc->pipe == 0) {
+ I915_WRITE(PIPEA_GMCH_DATA_M,
+ ((m_n.tu - 1) << PIPE_GMCH_DATA_M_TU_SIZE_SHIFT) |
+ m_n.gmch_m);
+ I915_WRITE(PIPEA_GMCH_DATA_N,
+ m_n.gmch_n);
+ I915_WRITE(PIPEA_DP_LINK_M, m_n.link_m);
+ I915_WRITE(PIPEA_DP_LINK_N, m_n.link_n);
+ } else {
+ I915_WRITE(PIPEB_GMCH_DATA_M,
+ ((m_n.tu - 1) << PIPE_GMCH_DATA_M_TU_SIZE_SHIFT) |
+ m_n.gmch_m);
+ I915_WRITE(PIPEB_GMCH_DATA_N,
+ m_n.gmch_n);
+ I915_WRITE(PIPEB_DP_LINK_M, m_n.link_m);
+ I915_WRITE(PIPEB_DP_LINK_N, m_n.link_n);
+ }
+}
+
+static void
+intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ struct intel_output *intel_output = enc_to_intel_output(encoder);
+ struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+ struct drm_crtc *crtc = intel_output->enc.crtc;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+
+ dp_priv->DP = (DP_LINK_TRAIN_OFF |
+ DP_VOLTAGE_0_4 |
+ DP_PRE_EMPHASIS_0 |
+ DP_SYNC_VS_HIGH |
+ DP_SYNC_HS_HIGH);
+
+ switch (dp_priv->lane_count) {
+ case 1:
+ dp_priv->DP |= DP_PORT_WIDTH_1;
+ break;
+ case 2:
+ dp_priv->DP |= DP_PORT_WIDTH_2;
+ break;
+ case 4:
+ dp_priv->DP |= DP_PORT_WIDTH_4;
+ break;
+ }
+ if (dp_priv->has_audio)
+ dp_priv->DP |= DP_AUDIO_OUTPUT_ENABLE;
+
+ memset(dp_priv->link_configuration, 0, DP_LINK_CONFIGURATION_SIZE);
+ dp_priv->link_configuration[0] = dp_priv->link_bw;
+ dp_priv->link_configuration[1] = dp_priv->lane_count;
+
+ /*
+ * Check for DPCD version > 1.1,
+ * enable enahanced frame stuff in that case
+ */
+ if (dp_priv->dpcd[0] >= 0x11) {
+ dp_priv->link_configuration[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN;
+ dp_priv->DP |= DP_ENHANCED_FRAMING;
+ }
+
+ if (intel_crtc->pipe == 1)
+ dp_priv->DP |= DP_PIPEB_SELECT;
+}
+
+
+static void
+intel_dp_dpms(struct drm_encoder *encoder, int mode)
+{
+ struct intel_output *intel_output = enc_to_intel_output(encoder);
+ struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+ struct drm_device *dev = intel_output->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ uint32_t dp_reg = I915_READ(dp_priv->output_reg);
+
+ if (mode != DRM_MODE_DPMS_ON) {
+ if (dp_reg & DP_PORT_EN)
+ intel_dp_link_down(intel_output, dp_priv->DP);
+ } else {
+ if (!(dp_reg & DP_PORT_EN))
+ intel_dp_link_train(intel_output, dp_priv->DP, dp_priv->link_configuration);
+ }
+ dp_priv->dpms_mode = mode;
+}
+
+/*
+ * Fetch AUX CH registers 0x202 - 0x207 which contain
+ * link status information
+ */
+static bool
+intel_dp_get_link_status(struct intel_output *intel_output,
+ uint8_t link_status[DP_LINK_STATUS_SIZE])
+{
+ int ret;
+
+ ret = intel_dp_aux_native_read(intel_output,
+ DP_LANE0_1_STATUS,
+ link_status, DP_LINK_STATUS_SIZE);
+ if (ret != DP_LINK_STATUS_SIZE)
+ return false;
+ return true;
+}
+
+static uint8_t
+intel_dp_link_status(uint8_t link_status[DP_LINK_STATUS_SIZE],
+ int r)
+{
+ return link_status[r - DP_LANE0_1_STATUS];
+}
+
+static void
+intel_dp_save(struct drm_connector *connector)
+{
+ struct intel_output *intel_output = to_intel_output(connector);
+ struct drm_device *dev = intel_output->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+
+ dp_priv->save_DP = I915_READ(dp_priv->output_reg);
+ intel_dp_aux_native_read(intel_output, DP_LINK_BW_SET,
+ dp_priv->save_link_configuration,
+ sizeof (dp_priv->save_link_configuration));
+}
+
+static uint8_t
+intel_get_adjust_request_voltage(uint8_t link_status[DP_LINK_STATUS_SIZE],
+ int lane)
+{
+ int i = DP_ADJUST_REQUEST_LANE0_1 + (lane >> 1);
+ int s = ((lane & 1) ?
+ DP_ADJUST_VOLTAGE_SWING_LANE1_SHIFT :
+ DP_ADJUST_VOLTAGE_SWING_LANE0_SHIFT);
+ uint8_t l = intel_dp_link_status(link_status, i);
+
+ return ((l >> s) & 3) << DP_TRAIN_VOLTAGE_SWING_SHIFT;
+}
+
+static uint8_t
+intel_get_adjust_request_pre_emphasis(uint8_t link_status[DP_LINK_STATUS_SIZE],
+ int lane)
+{
+ int i = DP_ADJUST_REQUEST_LANE0_1 + (lane >> 1);
+ int s = ((lane & 1) ?
+ DP_ADJUST_PRE_EMPHASIS_LANE1_SHIFT :
+ DP_ADJUST_PRE_EMPHASIS_LANE0_SHIFT);
+ uint8_t l = intel_dp_link_status(link_status, i);
+
+ return ((l >> s) & 3) << DP_TRAIN_PRE_EMPHASIS_SHIFT;
+}
+
+
+#if 0
+static char *voltage_names[] = {
+ "0.4V", "0.6V", "0.8V", "1.2V"
+};
+static char *pre_emph_names[] = {
+ "0dB", "3.5dB", "6dB", "9.5dB"
+};
+static char *link_train_names[] = {
+ "pattern 1", "pattern 2", "idle", "off"
+};
+#endif
+
+/*
+ * These are source-specific values; current Intel hardware supports
+ * a maximum voltage of 800mV and a maximum pre-emphasis of 6dB
+ */
+#define I830_DP_VOLTAGE_MAX DP_TRAIN_VOLTAGE_SWING_800
+
+static uint8_t
+intel_dp_pre_emphasis_max(uint8_t voltage_swing)
+{
+ switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) {
+ case DP_TRAIN_VOLTAGE_SWING_400:
+ return DP_TRAIN_PRE_EMPHASIS_6;
+ case DP_TRAIN_VOLTAGE_SWING_600:
+ return DP_TRAIN_PRE_EMPHASIS_6;
+ case DP_TRAIN_VOLTAGE_SWING_800:
+ return DP_TRAIN_PRE_EMPHASIS_3_5;
+ case DP_TRAIN_VOLTAGE_SWING_1200:
+ default:
+ return DP_TRAIN_PRE_EMPHASIS_0;
+ }
+}
+
+static void
+intel_get_adjust_train(struct intel_output *intel_output,
+ uint8_t link_status[DP_LINK_STATUS_SIZE],
+ int lane_count,
+ uint8_t train_set[4])
+{
+ uint8_t v = 0;
+ uint8_t p = 0;
+ int lane;
+
+ for (lane = 0; lane < lane_count; lane++) {
+ uint8_t this_v = intel_get_adjust_request_voltage(link_status, lane);
+ uint8_t this_p = intel_get_adjust_request_pre_emphasis(link_status, lane);
+
+ if (this_v > v)
+ v = this_v;
+ if (this_p > p)
+ p = this_p;
+ }
+
+ if (v >= I830_DP_VOLTAGE_MAX)
+ v = I830_DP_VOLTAGE_MAX | DP_TRAIN_MAX_SWING_REACHED;
+
+ if (p >= intel_dp_pre_emphasis_max(v))
+ p = intel_dp_pre_emphasis_max(v) | DP_TRAIN_MAX_PRE_EMPHASIS_REACHED;
+
+ for (lane = 0; lane < 4; lane++)
+ train_set[lane] = v | p;
+}
+
+static uint32_t
+intel_dp_signal_levels(uint8_t train_set, int lane_count)
+{
+ uint32_t signal_levels = 0;
+
+ switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) {
+ case DP_TRAIN_VOLTAGE_SWING_400:
+ default:
+ signal_levels |= DP_VOLTAGE_0_4;
+ break;
+ case DP_TRAIN_VOLTAGE_SWING_600:
+ signal_levels |= DP_VOLTAGE_0_6;
+ break;
+ case DP_TRAIN_VOLTAGE_SWING_800:
+ signal_levels |= DP_VOLTAGE_0_8;
+ break;
+ case DP_TRAIN_VOLTAGE_SWING_1200:
+ signal_levels |= DP_VOLTAGE_1_2;
+ break;
+ }
+ switch (train_set & DP_TRAIN_PRE_EMPHASIS_MASK) {
+ case DP_TRAIN_PRE_EMPHASIS_0:
+ default:
+ signal_levels |= DP_PRE_EMPHASIS_0;
+ break;
+ case DP_TRAIN_PRE_EMPHASIS_3_5:
+ signal_levels |= DP_PRE_EMPHASIS_3_5;
+ break;
+ case DP_TRAIN_PRE_EMPHASIS_6:
+ signal_levels |= DP_PRE_EMPHASIS_6;
+ break;
+ case DP_TRAIN_PRE_EMPHASIS_9_5:
+ signal_levels |= DP_PRE_EMPHASIS_9_5;
+ break;
+ }
+ return signal_levels;
+}
+
+static uint8_t
+intel_get_lane_status(uint8_t link_status[DP_LINK_STATUS_SIZE],
+ int lane)
+{
+ int i = DP_LANE0_1_STATUS + (lane >> 1);
+ int s = (lane & 1) * 4;
+ uint8_t l = intel_dp_link_status(link_status, i);
+
+ return (l >> s) & 0xf;
+}
+
+/* Check for clock recovery is done on all channels */
+static bool
+intel_clock_recovery_ok(uint8_t link_status[DP_LINK_STATUS_SIZE], int lane_count)
+{
+ int lane;
+ uint8_t lane_status;
+
+ for (lane = 0; lane < lane_count; lane++) {
+ lane_status = intel_get_lane_status(link_status, lane);
+ if ((lane_status & DP_LANE_CR_DONE) == 0)
+ return false;
+ }
+ return true;
+}
+
+/* Check to see if channel eq is done on all channels */
+#define CHANNEL_EQ_BITS (DP_LANE_CR_DONE|\
+ DP_LANE_CHANNEL_EQ_DONE|\
+ DP_LANE_SYMBOL_LOCKED)
+static bool
+intel_channel_eq_ok(uint8_t link_status[DP_LINK_STATUS_SIZE], int lane_count)
+{
+ uint8_t lane_align;
+ uint8_t lane_status;
+ int lane;
+
+ lane_align = intel_dp_link_status(link_status,
+ DP_LANE_ALIGN_STATUS_UPDATED);
+ if ((lane_align & DP_INTERLANE_ALIGN_DONE) == 0)
+ return false;
+ for (lane = 0; lane < lane_count; lane++) {
+ lane_status = intel_get_lane_status(link_status, lane);
+ if ((lane_status & CHANNEL_EQ_BITS) != CHANNEL_EQ_BITS)
+ return false;
+ }
+ return true;
+}
+
+static bool
+intel_dp_set_link_train(struct intel_output *intel_output,
+ uint32_t dp_reg_value,
+ uint8_t dp_train_pat,
+ uint8_t train_set[4],
+ bool first)
+{
+ struct drm_device *dev = intel_output->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+ int ret;
+
+ I915_WRITE(dp_priv->output_reg, dp_reg_value);
+ POSTING_READ(dp_priv->output_reg);
+ if (first)
+ intel_wait_for_vblank(dev);
+
+ intel_dp_aux_native_write_1(intel_output,
+ DP_TRAINING_PATTERN_SET,
+ dp_train_pat);
+
+ ret = intel_dp_aux_native_write(intel_output,
+ DP_TRAINING_LANE0_SET, train_set, 4);
+ if (ret != 4)
+ return false;
+
+ return true;
+}
+
+static void
+intel_dp_link_train(struct intel_output *intel_output, uint32_t DP,
+ uint8_t link_configuration[DP_LINK_CONFIGURATION_SIZE])
+{
+ struct drm_device *dev = intel_output->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+ uint8_t train_set[4];
+ uint8_t link_status[DP_LINK_STATUS_SIZE];
+ int i;
+ uint8_t voltage;
+ bool clock_recovery = false;
+ bool channel_eq = false;
+ bool first = true;
+ int tries;
+
+ /* Write the link configuration data */
+ intel_dp_aux_native_write(intel_output, 0x100,
+ link_configuration, DP_LINK_CONFIGURATION_SIZE);
+
+ DP |= DP_PORT_EN;
+ DP &= ~DP_LINK_TRAIN_MASK;
+ memset(train_set, 0, 4);
+ voltage = 0xff;
+ tries = 0;
+ clock_recovery = false;
+ for (;;) {
+ /* Use train_set[0] to set the voltage and pre emphasis values */
+ uint32_t signal_levels = intel_dp_signal_levels(train_set[0], dp_priv->lane_count);
+ DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels;
+
+ if (!intel_dp_set_link_train(intel_output, DP | DP_LINK_TRAIN_PAT_1,
+ DP_TRAINING_PATTERN_1, train_set, first))
+ break;
+ first = false;
+ /* Set training pattern 1 */
+
+ udelay(100);
+ if (!intel_dp_get_link_status(intel_output, link_status))
+ break;
+
+ if (intel_clock_recovery_ok(link_status, dp_priv->lane_count)) {
+ clock_recovery = true;
+ break;
+ }
+
+ /* Check to see if we've tried the max voltage */
+ for (i = 0; i < dp_priv->lane_count; i++)
+ if ((train_set[i] & DP_TRAIN_MAX_SWING_REACHED) == 0)
+ break;
+ if (i == dp_priv->lane_count)
+ break;
+
+ /* Check to see if we've tried the same voltage 5 times */
+ if ((train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK) == voltage) {
+ ++tries;
+ if (tries == 5)
+ break;
+ } else
+ tries = 0;
+ voltage = train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK;
+
+ /* Compute new train_set as requested by target */
+ intel_get_adjust_train(intel_output, link_status, dp_priv->lane_count, train_set);
+ }
+
+ /* channel equalization */
+ tries = 0;
+ channel_eq = false;
+ for (;;) {
+ /* Use train_set[0] to set the voltage and pre emphasis values */
+ uint32_t signal_levels = intel_dp_signal_levels(train_set[0], dp_priv->lane_count);
+ DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels;
+
+ /* channel eq pattern */
+ if (!intel_dp_set_link_train(intel_output, DP | DP_LINK_TRAIN_PAT_2,
+ DP_TRAINING_PATTERN_2, train_set,
+ false))
+ break;
+
+ udelay(400);
+ if (!intel_dp_get_link_status(intel_output, link_status))
+ break;
+
+ if (intel_channel_eq_ok(link_status, dp_priv->lane_count)) {
+ channel_eq = true;
+ break;
+ }
+
+ /* Try 5 times */
+ if (tries > 5)
+ break;
+
+ /* Compute new train_set as requested by target */
+ intel_get_adjust_train(intel_output, link_status, dp_priv->lane_count, train_set);
+ ++tries;
+ }
+
+ I915_WRITE(dp_priv->output_reg, DP | DP_LINK_TRAIN_OFF);
+ POSTING_READ(dp_priv->output_reg);
+ intel_dp_aux_native_write_1(intel_output,
+ DP_TRAINING_PATTERN_SET, DP_TRAINING_PATTERN_DISABLE);
+}
+
+static void
+intel_dp_link_down(struct intel_output *intel_output, uint32_t DP)
+{
+ struct drm_device *dev = intel_output->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+
+ I915_WRITE(dp_priv->output_reg, DP & ~DP_PORT_EN);
+ POSTING_READ(dp_priv->output_reg);
+}
+
+static void
+intel_dp_restore(struct drm_connector *connector)
+{
+ struct intel_output *intel_output = to_intel_output(connector);
+ struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+
+ if (dp_priv->save_DP & DP_PORT_EN)
+ intel_dp_link_train(intel_output, dp_priv->save_DP, dp_priv->save_link_configuration);
+ else
+ intel_dp_link_down(intel_output, dp_priv->save_DP);
+}
+
+/*
+ * According to DP spec
+ * 5.1.2:
+ * 1. Read DPCD
+ * 2. Configure link according to Receiver Capabilities
+ * 3. Use Link Training from 2.5.3.3 and 3.5.1.3
+ * 4. Check link status on receipt of hot-plug interrupt
+ */
+
+static void
+intel_dp_check_link_status(struct intel_output *intel_output)
+{
+ struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+ uint8_t link_status[DP_LINK_STATUS_SIZE];
+
+ if (!intel_output->enc.crtc)
+ return;
+
+ if (!intel_dp_get_link_status(intel_output, link_status)) {
+ intel_dp_link_down(intel_output, dp_priv->DP);
+ return;
+ }
+
+ if (!intel_channel_eq_ok(link_status, dp_priv->lane_count))
+ intel_dp_link_train(intel_output, dp_priv->DP, dp_priv->link_configuration);
+}
+
+/**
+ * Uses CRT_HOTPLUG_EN and CRT_HOTPLUG_STAT to detect DP connection.
+ *
+ * \return true if DP port is connected.
+ * \return false if DP port is disconnected.
+ */
+static enum drm_connector_status
+intel_dp_detect(struct drm_connector *connector)
+{
+ struct intel_output *intel_output = to_intel_output(connector);
+ struct drm_device *dev = intel_output->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+ uint32_t temp, bit;
+ enum drm_connector_status status;
+
+ dp_priv->has_audio = false;
+
+ temp = I915_READ(PORT_HOTPLUG_EN);
+
+ I915_WRITE(PORT_HOTPLUG_EN,
+ temp |
+ DPB_HOTPLUG_INT_EN |
+ DPC_HOTPLUG_INT_EN |
+ DPD_HOTPLUG_INT_EN);
+
+ POSTING_READ(PORT_HOTPLUG_EN);
+
+ switch (dp_priv->output_reg) {
+ case DP_B:
+ bit = DPB_HOTPLUG_INT_STATUS;
+ break;
+ case DP_C:
+ bit = DPC_HOTPLUG_INT_STATUS;
+ break;
+ case DP_D:
+ bit = DPD_HOTPLUG_INT_STATUS;
+ break;
+ default:
+ return connector_status_unknown;
+ }
+
+ temp = I915_READ(PORT_HOTPLUG_STAT);
+
+ if ((temp & bit) == 0)
+ return connector_status_disconnected;
+
+ status = connector_status_disconnected;
+ if (intel_dp_aux_native_read(intel_output,
+ 0x000, dp_priv->dpcd,
+ sizeof (dp_priv->dpcd)) == sizeof (dp_priv->dpcd))
+ {
+ if (dp_priv->dpcd[0] != 0)
+ status = connector_status_connected;
+ }
+ return status;
+}
+
+static int intel_dp_get_modes(struct drm_connector *connector)
+{
+ struct intel_output *intel_output = to_intel_output(connector);
+
+ /* We should parse the EDID data and find out if it has an audio sink
+ */
+
+ return intel_ddc_get_modes(intel_output);
+}
+
+static void
+intel_dp_destroy (struct drm_connector *connector)
+{
+ struct intel_output *intel_output = to_intel_output(connector);
+
+ if (intel_output->i2c_bus)
+ intel_i2c_destroy(intel_output->i2c_bus);
+ drm_sysfs_connector_remove(connector);
+ drm_connector_cleanup(connector);
+ kfree(intel_output);
+}
+
+static const struct drm_encoder_helper_funcs intel_dp_helper_funcs = {
+ .dpms = intel_dp_dpms,
+ .mode_fixup = intel_dp_mode_fixup,
+ .prepare = intel_encoder_prepare,
+ .mode_set = intel_dp_mode_set,
+ .commit = intel_encoder_commit,
+};
+
+static const struct drm_connector_funcs intel_dp_connector_funcs = {
+ .dpms = drm_helper_connector_dpms,
+ .save = intel_dp_save,
+ .restore = intel_dp_restore,
+ .detect = intel_dp_detect,
+ .fill_modes = drm_helper_probe_single_connector_modes,
+ .destroy = intel_dp_destroy,
+};
+
+static const struct drm_connector_helper_funcs intel_dp_connector_helper_funcs = {
+ .get_modes = intel_dp_get_modes,
+ .mode_valid = intel_dp_mode_valid,
+ .best_encoder = intel_best_encoder,
+};
+
+static void intel_dp_enc_destroy(struct drm_encoder *encoder)
+{
+ drm_encoder_cleanup(encoder);
+}
+
+static const struct drm_encoder_funcs intel_dp_enc_funcs = {
+ .destroy = intel_dp_enc_destroy,
+};
+
+void
+intel_dp_hot_plug(struct intel_output *intel_output)
+{
+ struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+
+ if (dp_priv->dpms_mode == DRM_MODE_DPMS_ON)
+ intel_dp_check_link_status(intel_output);
+}
+
+void
+intel_dp_init(struct drm_device *dev, int output_reg)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct drm_connector *connector;
+ struct intel_output *intel_output;
+ struct intel_dp_priv *dp_priv;
+
+ intel_output = kcalloc(sizeof(struct intel_output) +
+ sizeof(struct intel_dp_priv), 1, GFP_KERNEL);
+ if (!intel_output)
+ return;
+
+ dp_priv = (struct intel_dp_priv *)(intel_output + 1);
+
+ connector = &intel_output->base;
+ drm_connector_init(dev, connector, &intel_dp_connector_funcs,
+ DRM_MODE_CONNECTOR_DisplayPort);
+ drm_connector_helper_add(connector, &intel_dp_connector_helper_funcs);
+
+ intel_output->type = INTEL_OUTPUT_DISPLAYPORT;
+
+ connector->interlace_allowed = true;
+ connector->doublescan_allowed = 0;
+
+ dp_priv->intel_output = intel_output;
+ dp_priv->output_reg = output_reg;
+ dp_priv->has_audio = false;
+ dp_priv->dpms_mode = DRM_MODE_DPMS_ON;
+ intel_output->dev_priv = dp_priv;
+
+ drm_encoder_init(dev, &intel_output->enc, &intel_dp_enc_funcs,
+ DRM_MODE_ENCODER_TMDS);
+ drm_encoder_helper_add(&intel_output->enc, &intel_dp_helper_funcs);
+
+ drm_mode_connector_attach_encoder(&intel_output->base,
+ &intel_output->enc);
+ drm_sysfs_connector_add(connector);
+
+ /* Set up the DDC bus. */
+ intel_dp_i2c_init(intel_output,
+ (output_reg == DP_B) ? "DPDDC-B" :
+ (output_reg == DP_C) ? "DPDDC-C" : "DPDDC-D");
+ intel_output->ddc_bus = &dp_priv->adapter;
+ intel_output->hot_plug = intel_dp_hot_plug;
+
+ /* For G4X desktop chip, PEG_BAND_GAP_DATA 3:0 must first be written
+ * 0xd. Failure to do so will result in spurious interrupts being
+ * generated on the port when a cable is not attached.
+ */
+ if (IS_G4X(dev) && !IS_GM45(dev)) {
+ u32 temp = I915_READ(PEG_BAND_GAP_DATA);
+ I915_WRITE(PEG_BAND_GAP_DATA, (temp & ~0xf) | 0xd);
+ }
+}
diff --git a/drivers/gpu/drm/i915/intel_dp.h b/drivers/gpu/drm/i915/intel_dp.h
new file mode 100644
index 0000000..2b38054
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_dp.h
@@ -0,0 +1,144 @@
+/*
+ * Copyright © 2008 Keith Packard
+ *
+ * Permission to use, copy, modify, distribute, and sell this software and its
+ * documentation for any purpose is hereby granted without fee, provided that
+ * the above copyright notice appear in all copies and that both that copyright
+ * notice and this permission notice appear in supporting documentation, and
+ * that the name of the copyright holders not be used in advertising or
+ * publicity pertaining to distribution of the software without specific,
+ * written prior permission. The copyright holders make no representations
+ * about the suitability of this software for any purpose. It is provided "as
+ * is" without express or implied warranty.
+ *
+ * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+ * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+ * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+ * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
+ * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+ * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
+ * OF THIS SOFTWARE.
+ */
+
+#ifndef _INTEL_DP_H_
+#define _INTEL_DP_H_
+
+/* From the VESA DisplayPort spec */
+
+#define AUX_NATIVE_WRITE 0x8
+#define AUX_NATIVE_READ 0x9
+#define AUX_I2C_WRITE 0x0
+#define AUX_I2C_READ 0x1
+#define AUX_I2C_STATUS 0x2
+#define AUX_I2C_MOT 0x4
+
+#define AUX_NATIVE_REPLY_ACK (0x0 << 4)
+#define AUX_NATIVE_REPLY_NACK (0x1 << 4)
+#define AUX_NATIVE_REPLY_DEFER (0x2 << 4)
+#define AUX_NATIVE_REPLY_MASK (0x3 << 4)
+
+#define AUX_I2C_REPLY_ACK (0x0 << 6)
+#define AUX_I2C_REPLY_NACK (0x1 << 6)
+#define AUX_I2C_REPLY_DEFER (0x2 << 6)
+#define AUX_I2C_REPLY_MASK (0x3 << 6)
+
+/* AUX CH addresses */
+#define DP_LINK_BW_SET 0x100
+# define DP_LINK_BW_1_62 0x06
+# define DP_LINK_BW_2_7 0x0a
+
+#define DP_LANE_COUNT_SET 0x101
+# define DP_LANE_COUNT_MASK 0x0f
+# define DP_LANE_COUNT_ENHANCED_FRAME_EN (1 << 7)
+
+#define DP_TRAINING_PATTERN_SET 0x102
+
+# define DP_TRAINING_PATTERN_DISABLE 0
+# define DP_TRAINING_PATTERN_1 1
+# define DP_TRAINING_PATTERN_2 2
+# define DP_TRAINING_PATTERN_MASK 0x3
+
+# define DP_LINK_QUAL_PATTERN_DISABLE (0 << 2)
+# define DP_LINK_QUAL_PATTERN_D10_2 (1 << 2)
+# define DP_LINK_QUAL_PATTERN_ERROR_RATE (2 << 2)
+# define DP_LINK_QUAL_PATTERN_PRBS7 (3 << 2)
+# define DP_LINK_QUAL_PATTERN_MASK (3 << 2)
+
+# define DP_RECOVERED_CLOCK_OUT_EN (1 << 4)
+# define DP_LINK_SCRAMBLING_DISABLE (1 << 5)
+
+# define DP_SYMBOL_ERROR_COUNT_BOTH (0 << 6)
+# define DP_SYMBOL_ERROR_COUNT_DISPARITY (1 << 6)
+# define DP_SYMBOL_ERROR_COUNT_SYMBOL (2 << 6)
+# define DP_SYMBOL_ERROR_COUNT_MASK (3 << 6)
+
+#define DP_TRAINING_LANE0_SET 0x103
+#define DP_TRAINING_LANE1_SET 0x104
+#define DP_TRAINING_LANE2_SET 0x105
+#define DP_TRAINING_LANE3_SET 0x106
+
+# define DP_TRAIN_VOLTAGE_SWING_MASK 0x3
+# define DP_TRAIN_VOLTAGE_SWING_SHIFT 0
+# define DP_TRAIN_MAX_SWING_REACHED (1 << 2)
+# define DP_TRAIN_VOLTAGE_SWING_400 (0 << 0)
+# define DP_TRAIN_VOLTAGE_SWING_600 (1 << 0)
+# define DP_TRAIN_VOLTAGE_SWING_800 (2 << 0)
+# define DP_TRAIN_VOLTAGE_SWING_1200 (3 << 0)
+
+# define DP_TRAIN_PRE_EMPHASIS_MASK (3 << 3)
+# define DP_TRAIN_PRE_EMPHASIS_0 (0 << 3)
+# define DP_TRAIN_PRE_EMPHASIS_3_5 (1 << 3)
+# define DP_TRAIN_PRE_EMPHASIS_6 (2 << 3)
+# define DP_TRAIN_PRE_EMPHASIS_9_5 (3 << 3)
+
+# define DP_TRAIN_PRE_EMPHASIS_SHIFT 3
+# define DP_TRAIN_MAX_PRE_EMPHASIS_REACHED (1 << 5)
+
+#define DP_DOWNSPREAD_CTRL 0x107
+# define DP_SPREAD_AMP_0_5 (1 << 4)
+
+#define DP_MAIN_LINK_CHANNEL_CODING_SET 0x108
+# define DP_SET_ANSI_8B10B (1 << 0)
+
+#define DP_LANE0_1_STATUS 0x202
+#define DP_LANE2_3_STATUS 0x203
+
+# define DP_LANE_CR_DONE (1 << 0)
+# define DP_LANE_CHANNEL_EQ_DONE (1 << 1)
+# define DP_LANE_SYMBOL_LOCKED (1 << 2)
+
+#define DP_LANE_ALIGN_STATUS_UPDATED 0x204
+
+#define DP_INTERLANE_ALIGN_DONE (1 << 0)
+#define DP_DOWNSTREAM_PORT_STATUS_CHANGED (1 << 6)
+#define DP_LINK_STATUS_UPDATED (1 << 7)
+
+#define DP_SINK_STATUS 0x205
+
+#define DP_RECEIVE_PORT_0_STATUS (1 << 0)
+#define DP_RECEIVE_PORT_1_STATUS (1 << 1)
+
+#define DP_ADJUST_REQUEST_LANE0_1 0x206
+#define DP_ADJUST_REQUEST_LANE2_3 0x207
+
+#define DP_ADJUST_VOLTAGE_SWING_LANE0_MASK 0x03
+#define DP_ADJUST_VOLTAGE_SWING_LANE0_SHIFT 0
+#define DP_ADJUST_PRE_EMPHASIS_LANE0_MASK 0x0c
+#define DP_ADJUST_PRE_EMPHASIS_LANE0_SHIFT 2
+#define DP_ADJUST_VOLTAGE_SWING_LANE1_MASK 0x30
+#define DP_ADJUST_VOLTAGE_SWING_LANE1_SHIFT 4
+#define DP_ADJUST_PRE_EMPHASIS_LANE1_MASK 0xc0
+#define DP_ADJUST_PRE_EMPHASIS_LANE1_SHIFT 6
+
+struct i2c_algo_dp_aux_data {
+ bool running;
+ u16 address;
+ int (*aux_ch) (struct i2c_adapter *adapter,
+ uint8_t *send, int send_bytes,
+ uint8_t *recv, int recv_bytes);
+};
+
+int
+i2c_dp_aux_add_bus(struct i2c_adapter *adapter);
+
+#endif /* _INTEL_DP_H_ */
diff --git a/drivers/gpu/drm/i915/intel_dp_i2c.c b/drivers/gpu/drm/i915/intel_dp_i2c.c
new file mode 100644
index 0000000..4e60f14
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_dp_i2c.c
@@ -0,0 +1,272 @@
+/*
+ * Copyright © 2009 Keith Packard
+ *
+ * Permission to use, copy, modify, distribute, and sell this software and its
+ * documentation for any purpose is hereby granted without fee, provided that
+ * the above copyright notice appear in all copies and that both that copyright
+ * notice and this permission notice appear in supporting documentation, and
+ * that the name of the copyright holders not be used in advertising or
+ * publicity pertaining to distribution of the software without specific,
+ * written prior permission. The copyright holders make no representations
+ * about the suitability of this software for any purpose. It is provided "as
+ * is" without express or implied warranty.
+ *
+ * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+ * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+ * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+ * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
+ * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+ * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
+ * OF THIS SOFTWARE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/i2c.h>
+#include "intel_dp.h"
+
+/* Run a single AUX_CH I2C transaction, writing/reading data as necessary */
+
+#define MODE_I2C_START 1
+#define MODE_I2C_WRITE 2
+#define MODE_I2C_READ 4
+#define MODE_I2C_STOP 8
+
+static int
+i2c_algo_dp_aux_transaction(struct i2c_adapter *adapter, int mode,
+ uint8_t write_byte, uint8_t *read_byte)
+{
+ struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data;
+ uint16_t address = algo_data->address;
+ uint8_t msg[5];
+ uint8_t reply[2];
+ int msg_bytes;
+ int reply_bytes;
+ int ret;
+
+ /* Set up the command byte */
+ if (mode & MODE_I2C_READ)
+ msg[0] = AUX_I2C_READ << 4;
+ else
+ msg[0] = AUX_I2C_WRITE << 4;
+
+ if (!(mode & MODE_I2C_STOP))
+ msg[0] |= AUX_I2C_MOT << 4;
+
+ msg[1] = address >> 8;
+ msg[2] = address;
+
+ switch (mode) {
+ case MODE_I2C_WRITE:
+ msg[3] = 0;
+ msg[4] = write_byte;
+ msg_bytes = 5;
+ reply_bytes = 1;
+ break;
+ case MODE_I2C_READ:
+ msg[3] = 0;
+ msg_bytes = 4;
+ reply_bytes = 2;
+ break;
+ default:
+ msg_bytes = 3;
+ reply_bytes = 1;
+ break;
+ }
+
+ for (;;) {
+ ret = (*algo_data->aux_ch)(adapter,
+ msg, msg_bytes,
+ reply, reply_bytes);
+ if (ret < 0) {
+ printk(KERN_ERR "aux_ch failed %d\n", ret);
+ return ret;
+ }
+ switch (reply[0] & AUX_I2C_REPLY_MASK) {
+ case AUX_I2C_REPLY_ACK:
+ if (mode == MODE_I2C_READ) {
+ *read_byte = reply[1];
+ }
+ return reply_bytes - 1;
+ case AUX_I2C_REPLY_NACK:
+ printk(KERN_ERR "aux_ch nack\n");
+ return -EREMOTEIO;
+ case AUX_I2C_REPLY_DEFER:
+ printk(KERN_ERR "aux_ch defer\n");
+ udelay(100);
+ break;
+ default:
+ printk(KERN_ERR "aux_ch invalid reply 0x%02x\n", reply[0]);
+ return -EREMOTEIO;
+ }
+ }
+}
+
+/*
+ * I2C over AUX CH
+ */
+
+/*
+ * Send the address. If the I2C link is running, this 'restarts'
+ * the connection with the new address, this is used for doing
+ * a write followed by a read (as needed for DDC)
+ */
+static int
+i2c_algo_dp_aux_address(struct i2c_adapter *adapter, u16 address, bool reading)
+{
+ struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data;
+ int mode = MODE_I2C_START;
+ int ret;
+
+ if (reading)
+ mode |= MODE_I2C_READ;
+ else
+ mode |= MODE_I2C_WRITE;
+ algo_data->address = address;
+ algo_data->running = true;
+ ret = i2c_algo_dp_aux_transaction(adapter, mode, 0, NULL);
+ return ret;
+}
+
+/*
+ * Stop the I2C transaction. This closes out the link, sending
+ * a bare address packet with the MOT bit turned off
+ */
+static void
+i2c_algo_dp_aux_stop(struct i2c_adapter *adapter, bool reading)
+{
+ struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data;
+ int mode = MODE_I2C_STOP;
+
+ if (reading)
+ mode |= MODE_I2C_READ;
+ else
+ mode |= MODE_I2C_WRITE;
+ if (algo_data->running) {
+ (void) i2c_algo_dp_aux_transaction(adapter, mode, 0, NULL);
+ algo_data->running = false;
+ }
+}
+
+/*
+ * Write a single byte to the current I2C address, the
+ * the I2C link must be running or this returns -EIO
+ */
+static int
+i2c_algo_dp_aux_put_byte(struct i2c_adapter *adapter, u8 byte)
+{
+ struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data;
+ int ret;
+
+ if (!algo_data->running)
+ return -EIO;
+
+ ret = i2c_algo_dp_aux_transaction(adapter, MODE_I2C_WRITE, byte, NULL);
+ return ret;
+}
+
+/*
+ * Read a single byte from the current I2C address, the
+ * I2C link must be running or this returns -EIO
+ */
+static int
+i2c_algo_dp_aux_get_byte(struct i2c_adapter *adapter, u8 *byte_ret)
+{
+ struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data;
+ int ret;
+
+ if (!algo_data->running)
+ return -EIO;
+
+ ret = i2c_algo_dp_aux_transaction(adapter, MODE_I2C_READ, 0, byte_ret);
+ return ret;
+}
+
+static int
+i2c_algo_dp_aux_xfer(struct i2c_adapter *adapter,
+ struct i2c_msg *msgs,
+ int num)
+{
+ int ret = 0;
+ bool reading = false;
+ int m;
+ int b;
+
+ for (m = 0; m < num; m++) {
+ u16 len = msgs[m].len;
+ u8 *buf = msgs[m].buf;
+ reading = (msgs[m].flags & I2C_M_RD) != 0;
+ ret = i2c_algo_dp_aux_address(adapter, msgs[m].addr, reading);
+ if (ret < 0)
+ break;
+ if (reading) {
+ for (b = 0; b < len; b++) {
+ ret = i2c_algo_dp_aux_get_byte(adapter, &buf[b]);
+ if (ret < 0)
+ break;
+ }
+ } else {
+ for (b = 0; b < len; b++) {
+ ret = i2c_algo_dp_aux_put_byte(adapter, buf[b]);
+ if (ret < 0)
+ break;
+ }
+ }
+ if (ret < 0)
+ break;
+ }
+ if (ret >= 0)
+ ret = num;
+ i2c_algo_dp_aux_stop(adapter, reading);
+ printk(KERN_ERR "dp_aux_xfer return %d\n", ret);
+ return ret;
+}
+
+static u32
+i2c_algo_dp_aux_functionality(struct i2c_adapter *adapter)
+{
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL |
+ I2C_FUNC_SMBUS_READ_BLOCK_DATA |
+ I2C_FUNC_SMBUS_BLOCK_PROC_CALL |
+ I2C_FUNC_10BIT_ADDR;
+}
+
+static const struct i2c_algorithm i2c_dp_aux_algo = {
+ .master_xfer = i2c_algo_dp_aux_xfer,
+ .functionality = i2c_algo_dp_aux_functionality,
+};
+
+static void
+i2c_dp_aux_reset_bus(struct i2c_adapter *adapter)
+{
+ (void) i2c_algo_dp_aux_address(adapter, 0, false);
+ (void) i2c_algo_dp_aux_stop(adapter, false);
+
+}
+
+static int
+i2c_dp_aux_prepare_bus(struct i2c_adapter *adapter)
+{
+ adapter->algo = &i2c_dp_aux_algo;
+ adapter->retries = 3;
+ i2c_dp_aux_reset_bus(adapter);
+ return 0;
+}
+
+int
+i2c_dp_aux_add_bus(struct i2c_adapter *adapter)
+{
+ int error;
+
+ error = i2c_dp_aux_prepare_bus(adapter);
+ if (error)
+ return error;
+ error = i2c_add_adapter(adapter);
+ return error;
+}
+EXPORT_SYMBOL(i2c_dp_aux_add_bus);
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index cd4b9c5..004541c 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -54,6 +54,7 @@
#define INTEL_OUTPUT_LVDS 4
#define INTEL_OUTPUT_TVOUT 5
#define INTEL_OUTPUT_HDMI 6
+#define INTEL_OUTPUT_DISPLAYPORT 7
#define INTEL_DVO_CHIP_NONE 0
#define INTEL_DVO_CHIP_LVDS 1
@@ -65,7 +66,6 @@
u32 reg; /* GPIO reg */
struct i2c_adapter adapter;
struct i2c_algo_bit_data algo;
- u8 slave_addr;
};
struct intel_framebuffer {
@@ -79,11 +79,12 @@
struct drm_encoder enc;
int type;
- struct intel_i2c_chan *i2c_bus; /* for control functions */
- struct intel_i2c_chan *ddc_bus; /* for DDC only stuff */
+ struct i2c_adapter *i2c_bus;
+ struct i2c_adapter *ddc_bus;
bool load_detect_temp;
bool needs_tv_clock;
void *dev_priv;
+ void (*hot_plug)(struct intel_output *);
};
struct intel_crtc {
@@ -104,9 +105,9 @@
#define enc_to_intel_output(x) container_of(x, struct intel_output, enc)
#define to_intel_framebuffer(x) container_of(x, struct intel_framebuffer, base)
-struct intel_i2c_chan *intel_i2c_create(struct drm_device *dev, const u32 reg,
- const char *name);
-void intel_i2c_destroy(struct intel_i2c_chan *chan);
+struct i2c_adapter *intel_i2c_create(struct drm_device *dev, const u32 reg,
+ const char *name);
+void intel_i2c_destroy(struct i2c_adapter *adapter);
int intel_ddc_get_modes(struct intel_output *intel_output);
extern bool intel_ddc_probe(struct intel_output *intel_output);
void intel_i2c_quirk_set(struct drm_device *dev, bool enable);
@@ -116,6 +117,10 @@
extern void intel_dvo_init(struct drm_device *dev);
extern void intel_tv_init(struct drm_device *dev);
extern void intel_lvds_init(struct drm_device *dev);
+extern void intel_dp_init(struct drm_device *dev, int dp_reg);
+void
+intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode);
extern void intel_crtc_load_lut(struct drm_crtc *crtc);
extern void intel_encoder_prepare (struct drm_encoder *encoder);
diff --git a/drivers/gpu/drm/i915/intel_dvo.c b/drivers/gpu/drm/i915/intel_dvo.c
index 1ee3007..13bff20 100644
--- a/drivers/gpu/drm/i915/intel_dvo.c
+++ b/drivers/gpu/drm/i915/intel_dvo.c
@@ -384,10 +384,9 @@
{
struct intel_output *intel_output;
struct intel_dvo_device *dvo;
- struct intel_i2c_chan *i2cbus = NULL;
+ struct i2c_adapter *i2cbus = NULL;
int ret = 0;
int i;
- int gpio_inited = 0;
int encoder_type = DRM_MODE_ENCODER_NONE;
intel_output = kzalloc (sizeof(struct intel_output), GFP_KERNEL);
if (!intel_output)
@@ -420,14 +419,11 @@
* It appears that everything is on GPIOE except for panels
* on i830 laptops, which are on GPIOB (DVOA).
*/
- if (gpio_inited != gpio) {
- if (i2cbus != NULL)
- intel_i2c_destroy(i2cbus);
- if (!(i2cbus = intel_i2c_create(dev, gpio,
- gpio == GPIOB ? "DVOI2C_B" : "DVOI2C_E"))) {
- continue;
- }
- gpio_inited = gpio;
+ if (i2cbus != NULL)
+ intel_i2c_destroy(i2cbus);
+ if (!(i2cbus = intel_i2c_create(dev, gpio,
+ gpio == GPIOB ? "DVOI2C_B" : "DVOI2C_E"))) {
+ continue;
}
if (dvo->dev_ops!= NULL)
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index 4ea2a65..9e30daa 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -31,6 +31,7 @@
#include "drmP.h"
#include "drm.h"
#include "drm_crtc.h"
+#include "drm_edid.h"
#include "intel_drv.h"
#include "i915_drm.h"
#include "i915_drv.h"
@@ -56,8 +57,7 @@
sdvox = SDVO_ENCODING_HDMI |
SDVO_BORDER_ENABLE |
SDVO_VSYNC_ACTIVE_HIGH |
- SDVO_HSYNC_ACTIVE_HIGH |
- SDVO_NULL_PACKETS_DURING_VSYNC;
+ SDVO_HSYNC_ACTIVE_HIGH;
if (hdmi_priv->has_hdmi_sink)
sdvox |= SDVO_AUDIO_ENABLE;
@@ -129,20 +129,26 @@
return true;
}
-static void
-intel_hdmi_sink_detect(struct drm_connector *connector)
+static enum drm_connector_status
+intel_hdmi_edid_detect(struct drm_connector *connector)
{
struct intel_output *intel_output = to_intel_output(connector);
struct intel_hdmi_priv *hdmi_priv = intel_output->dev_priv;
struct edid *edid = NULL;
+ enum drm_connector_status status = connector_status_disconnected;
edid = drm_get_edid(&intel_output->base,
- &intel_output->ddc_bus->adapter);
- if (edid != NULL) {
- hdmi_priv->has_hdmi_sink = drm_detect_hdmi_monitor(edid);
- kfree(edid);
+ intel_output->ddc_bus);
+ hdmi_priv->has_hdmi_sink = false;
+ if (edid) {
+ if (edid->input & DRM_EDID_INPUT_DIGITAL) {
+ status = connector_status_connected;
+ hdmi_priv->has_hdmi_sink = drm_detect_hdmi_monitor(edid);
+ }
intel_output->base.display_info.raw_edid = NULL;
+ kfree(edid);
}
+ return status;
}
static enum drm_connector_status
@@ -154,11 +160,7 @@
/* FIXME hotplug detect */
hdmi_priv->has_hdmi_sink = false;
- intel_hdmi_sink_detect(connector);
- if (hdmi_priv->has_hdmi_sink)
- return connector_status_connected;
- else
- return connector_status_disconnected;
+ return intel_hdmi_edid_detect(connector);
}
static enum drm_connector_status
@@ -201,10 +203,9 @@
return connector_status_unknown;
}
- if ((I915_READ(PORT_HOTPLUG_STAT) & bit) != 0) {
- intel_hdmi_sink_detect(connector);
- return connector_status_connected;
- } else
+ if ((I915_READ(PORT_HOTPLUG_STAT) & bit) != 0)
+ return intel_hdmi_edid_detect(connector);
+ else
return connector_status_disconnected;
}
diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c
index f7061f6..62b8bea 100644
--- a/drivers/gpu/drm/i915/intel_i2c.c
+++ b/drivers/gpu/drm/i915/intel_i2c.c
@@ -124,6 +124,7 @@
* @output: driver specific output device
* @reg: GPIO reg to use
* @name: name for this bus
+ * @slave_addr: slave address (if fixed)
*
* Creates and registers a new i2c bus with the Linux i2c layer, for use
* in output probing and control (e.g. DDC or SDVO control functions).
@@ -139,8 +140,8 @@
* %GPIOH
* see PRM for details on how these different busses are used.
*/
-struct intel_i2c_chan *intel_i2c_create(struct drm_device *dev, const u32 reg,
- const char *name)
+struct i2c_adapter *intel_i2c_create(struct drm_device *dev, const u32 reg,
+ const char *name)
{
struct intel_i2c_chan *chan;
@@ -174,7 +175,7 @@
intel_i2c_quirk_set(dev, false);
udelay(20);
- return chan;
+ return &chan->adapter;
out_free:
kfree(chan);
@@ -187,11 +188,16 @@
*
* Unregister the adapter from the i2c layer, then free the structure.
*/
-void intel_i2c_destroy(struct intel_i2c_chan *chan)
+void intel_i2c_destroy(struct i2c_adapter *adapter)
{
- if (!chan)
+ struct intel_i2c_chan *chan;
+
+ if (!adapter)
return;
+ chan = container_of(adapter,
+ struct intel_i2c_chan,
+ adapter);
i2c_del_adapter(&chan->adapter);
kfree(chan);
}
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index f073ed8..9564ca4 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -39,6 +39,21 @@
#define I915_LVDS "i915_lvds"
+/*
+ * the following four scaling options are defined.
+ * #define DRM_MODE_SCALE_NON_GPU 0
+ * #define DRM_MODE_SCALE_FULLSCREEN 1
+ * #define DRM_MODE_SCALE_NO_SCALE 2
+ * #define DRM_MODE_SCALE_ASPECT 3
+ */
+
+/* Private structure for the integrated LVDS support */
+struct intel_lvds_priv {
+ int fitting_mode;
+ u32 pfit_control;
+ u32 pfit_pgm_ratios;
+};
+
/**
* Sets the backlight level.
*
@@ -213,10 +228,27 @@
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
+ /*
+ * float point operation is not supported . So the PANEL_RATIO_FACTOR
+ * is defined, which can avoid the float point computation when
+ * calculating the panel ratio.
+ */
+#define PANEL_RATIO_FACTOR 8192
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
struct drm_encoder *tmp_encoder;
+ struct intel_output *intel_output = enc_to_intel_output(encoder);
+ struct intel_lvds_priv *lvds_priv = intel_output->dev_priv;
+ u32 pfit_control = 0, pfit_pgm_ratios = 0;
+ int left_border = 0, right_border = 0, top_border = 0;
+ int bottom_border = 0;
+ bool border = 0;
+ int panel_ratio, desired_ratio, vert_scale, horiz_scale;
+ int horiz_ratio, vert_ratio;
+ u32 hsync_width, vsync_width;
+ u32 hblank_width, vblank_width;
+ u32 hsync_pos, vsync_pos;
/* Should never happen!! */
if (!IS_I965G(dev) && intel_crtc->pipe == 0) {
@@ -232,7 +264,9 @@
return false;
}
}
-
+ /* If we don't have a panel mode, there is nothing we can do */
+ if (dev_priv->panel_fixed_mode == NULL)
+ return true;
/*
* If we have timings from the BIOS for the panel, put them in
* to the adjusted mode. The CRTC will be set up for this mode,
@@ -256,6 +290,243 @@
drm_mode_set_crtcinfo(adjusted_mode, CRTC_INTERLACE_HALVE_V);
}
+ /* Make sure pre-965s set dither correctly */
+ if (!IS_I965G(dev)) {
+ if (dev_priv->panel_wants_dither || dev_priv->lvds_dither)
+ pfit_control |= PANEL_8TO6_DITHER_ENABLE;
+ }
+
+ /* Native modes don't need fitting */
+ if (adjusted_mode->hdisplay == mode->hdisplay &&
+ adjusted_mode->vdisplay == mode->vdisplay) {
+ pfit_pgm_ratios = 0;
+ border = 0;
+ goto out;
+ }
+
+ /* 965+ wants fuzzy fitting */
+ if (IS_I965G(dev))
+ pfit_control |= (intel_crtc->pipe << PFIT_PIPE_SHIFT) |
+ PFIT_FILTER_FUZZY;
+
+ hsync_width = adjusted_mode->crtc_hsync_end -
+ adjusted_mode->crtc_hsync_start;
+ vsync_width = adjusted_mode->crtc_vsync_end -
+ adjusted_mode->crtc_vsync_start;
+ hblank_width = adjusted_mode->crtc_hblank_end -
+ adjusted_mode->crtc_hblank_start;
+ vblank_width = adjusted_mode->crtc_vblank_end -
+ adjusted_mode->crtc_vblank_start;
+ /*
+ * Deal with panel fitting options. Figure out how to stretch the
+ * image based on its aspect ratio & the current panel fitting mode.
+ */
+ panel_ratio = adjusted_mode->hdisplay * PANEL_RATIO_FACTOR /
+ adjusted_mode->vdisplay;
+ desired_ratio = mode->hdisplay * PANEL_RATIO_FACTOR /
+ mode->vdisplay;
+ /*
+ * Enable automatic panel scaling for non-native modes so that they fill
+ * the screen. Should be enabled before the pipe is enabled, according
+ * to register description and PRM.
+ * Change the value here to see the borders for debugging
+ */
+ I915_WRITE(BCLRPAT_A, 0);
+ I915_WRITE(BCLRPAT_B, 0);
+
+ switch (lvds_priv->fitting_mode) {
+ case DRM_MODE_SCALE_NO_SCALE:
+ /*
+ * For centered modes, we have to calculate border widths &
+ * heights and modify the values programmed into the CRTC.
+ */
+ left_border = (adjusted_mode->hdisplay - mode->hdisplay) / 2;
+ right_border = left_border;
+ if (mode->hdisplay & 1)
+ right_border++;
+ top_border = (adjusted_mode->vdisplay - mode->vdisplay) / 2;
+ bottom_border = top_border;
+ if (mode->vdisplay & 1)
+ bottom_border++;
+ /* Set active & border values */
+ adjusted_mode->crtc_hdisplay = mode->hdisplay;
+ /* Keep the boder be even */
+ if (right_border & 1)
+ right_border++;
+ /* use the border directly instead of border minuse one */
+ adjusted_mode->crtc_hblank_start = mode->hdisplay +
+ right_border;
+ /* keep the blank width constant */
+ adjusted_mode->crtc_hblank_end =
+ adjusted_mode->crtc_hblank_start + hblank_width;
+ /* get the hsync pos relative to hblank start */
+ hsync_pos = (hblank_width - hsync_width) / 2;
+ /* keep the hsync pos be even */
+ if (hsync_pos & 1)
+ hsync_pos++;
+ adjusted_mode->crtc_hsync_start =
+ adjusted_mode->crtc_hblank_start + hsync_pos;
+ /* keep the hsync width constant */
+ adjusted_mode->crtc_hsync_end =
+ adjusted_mode->crtc_hsync_start + hsync_width;
+ adjusted_mode->crtc_vdisplay = mode->vdisplay;
+ /* use the border instead of border minus one */
+ adjusted_mode->crtc_vblank_start = mode->vdisplay +
+ bottom_border;
+ /* keep the vblank width constant */
+ adjusted_mode->crtc_vblank_end =
+ adjusted_mode->crtc_vblank_start + vblank_width;
+ /* get the vsync start postion relative to vblank start */
+ vsync_pos = (vblank_width - vsync_width) / 2;
+ adjusted_mode->crtc_vsync_start =
+ adjusted_mode->crtc_vblank_start + vsync_pos;
+ /* keep the vsync width constant */
+ adjusted_mode->crtc_vsync_end =
+ adjusted_mode->crtc_vblank_start + vsync_width;
+ border = 1;
+ break;
+ case DRM_MODE_SCALE_ASPECT:
+ /* Scale but preserve the spect ratio */
+ pfit_control |= PFIT_ENABLE;
+ if (IS_I965G(dev)) {
+ /* 965+ is easy, it does everything in hw */
+ if (panel_ratio > desired_ratio)
+ pfit_control |= PFIT_SCALING_PILLAR;
+ else if (panel_ratio < desired_ratio)
+ pfit_control |= PFIT_SCALING_LETTER;
+ else
+ pfit_control |= PFIT_SCALING_AUTO;
+ } else {
+ /*
+ * For earlier chips we have to calculate the scaling
+ * ratio by hand and program it into the
+ * PFIT_PGM_RATIO register
+ */
+ u32 horiz_bits, vert_bits, bits = 12;
+ horiz_ratio = mode->hdisplay * PANEL_RATIO_FACTOR/
+ adjusted_mode->hdisplay;
+ vert_ratio = mode->vdisplay * PANEL_RATIO_FACTOR/
+ adjusted_mode->vdisplay;
+ horiz_scale = adjusted_mode->hdisplay *
+ PANEL_RATIO_FACTOR / mode->hdisplay;
+ vert_scale = adjusted_mode->vdisplay *
+ PANEL_RATIO_FACTOR / mode->vdisplay;
+
+ /* retain aspect ratio */
+ if (panel_ratio > desired_ratio) { /* Pillar */
+ u32 scaled_width;
+ scaled_width = mode->hdisplay * vert_scale /
+ PANEL_RATIO_FACTOR;
+ horiz_ratio = vert_ratio;
+ pfit_control |= (VERT_AUTO_SCALE |
+ VERT_INTERP_BILINEAR |
+ HORIZ_INTERP_BILINEAR);
+ /* Pillar will have left/right borders */
+ left_border = (adjusted_mode->hdisplay -
+ scaled_width) / 2;
+ right_border = left_border;
+ if (mode->hdisplay & 1) /* odd resolutions */
+ right_border++;
+ /* keep the border be even */
+ if (right_border & 1)
+ right_border++;
+ adjusted_mode->crtc_hdisplay = scaled_width;
+ /* use border instead of border minus one */
+ adjusted_mode->crtc_hblank_start =
+ scaled_width + right_border;
+ /* keep the hblank width constant */
+ adjusted_mode->crtc_hblank_end =
+ adjusted_mode->crtc_hblank_start +
+ hblank_width;
+ /*
+ * get the hsync start pos relative to
+ * hblank start
+ */
+ hsync_pos = (hblank_width - hsync_width) / 2;
+ /* keep the hsync_pos be even */
+ if (hsync_pos & 1)
+ hsync_pos++;
+ adjusted_mode->crtc_hsync_start =
+ adjusted_mode->crtc_hblank_start +
+ hsync_pos;
+ /* keept hsync width constant */
+ adjusted_mode->crtc_hsync_end =
+ adjusted_mode->crtc_hsync_start +
+ hsync_width;
+ border = 1;
+ } else if (panel_ratio < desired_ratio) { /* letter */
+ u32 scaled_height = mode->vdisplay *
+ horiz_scale / PANEL_RATIO_FACTOR;
+ vert_ratio = horiz_ratio;
+ pfit_control |= (HORIZ_AUTO_SCALE |
+ VERT_INTERP_BILINEAR |
+ HORIZ_INTERP_BILINEAR);
+ /* Letterbox will have top/bottom border */
+ top_border = (adjusted_mode->vdisplay -
+ scaled_height) / 2;
+ bottom_border = top_border;
+ if (mode->vdisplay & 1)
+ bottom_border++;
+ adjusted_mode->crtc_vdisplay = scaled_height;
+ /* use border instead of border minus one */
+ adjusted_mode->crtc_vblank_start =
+ scaled_height + bottom_border;
+ /* keep the vblank width constant */
+ adjusted_mode->crtc_vblank_end =
+ adjusted_mode->crtc_vblank_start +
+ vblank_width;
+ /*
+ * get the vsync start pos relative to
+ * vblank start
+ */
+ vsync_pos = (vblank_width - vsync_width) / 2;
+ adjusted_mode->crtc_vsync_start =
+ adjusted_mode->crtc_vblank_start +
+ vsync_pos;
+ /* keep the vsync width constant */
+ adjusted_mode->crtc_vsync_end =
+ adjusted_mode->crtc_vsync_start +
+ vsync_width;
+ border = 1;
+ } else {
+ /* Aspects match, Let hw scale both directions */
+ pfit_control |= (VERT_AUTO_SCALE |
+ HORIZ_AUTO_SCALE |
+ VERT_INTERP_BILINEAR |
+ HORIZ_INTERP_BILINEAR);
+ }
+ horiz_bits = (1 << bits) * horiz_ratio /
+ PANEL_RATIO_FACTOR;
+ vert_bits = (1 << bits) * vert_ratio /
+ PANEL_RATIO_FACTOR;
+ pfit_pgm_ratios =
+ ((vert_bits << PFIT_VERT_SCALE_SHIFT) &
+ PFIT_VERT_SCALE_MASK) |
+ ((horiz_bits << PFIT_HORIZ_SCALE_SHIFT) &
+ PFIT_HORIZ_SCALE_MASK);
+ }
+ break;
+
+ case DRM_MODE_SCALE_FULLSCREEN:
+ /*
+ * Full scaling, even if it changes the aspect ratio.
+ * Fortunately this is all done for us in hw.
+ */
+ pfit_control |= PFIT_ENABLE;
+ if (IS_I965G(dev))
+ pfit_control |= PFIT_SCALING_AUTO;
+ else
+ pfit_control |= (VERT_AUTO_SCALE | HORIZ_AUTO_SCALE |
+ VERT_INTERP_BILINEAR |
+ HORIZ_INTERP_BILINEAR);
+ break;
+ default:
+ break;
+ }
+
+out:
+ lvds_priv->pfit_control = pfit_control;
+ lvds_priv->pfit_pgm_ratios = pfit_pgm_ratios;
/*
* XXX: It would be nice to support lower refresh rates on the
* panels to reduce power consumption, and perhaps match the
@@ -301,8 +572,8 @@
{
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
- u32 pfit_control;
+ struct intel_output *intel_output = enc_to_intel_output(encoder);
+ struct intel_lvds_priv *lvds_priv = intel_output->dev_priv;
/*
* The LVDS pin pair will already have been turned on in the
@@ -319,22 +590,8 @@
* screen. Should be enabled before the pipe is enabled, according to
* register description and PRM.
*/
- if (mode->hdisplay != adjusted_mode->hdisplay ||
- mode->vdisplay != adjusted_mode->vdisplay)
- pfit_control = (PFIT_ENABLE | VERT_AUTO_SCALE |
- HORIZ_AUTO_SCALE | VERT_INTERP_BILINEAR |
- HORIZ_INTERP_BILINEAR);
- else
- pfit_control = 0;
-
- if (!IS_I965G(dev)) {
- if (dev_priv->panel_wants_dither || dev_priv->lvds_dither)
- pfit_control |= PANEL_8TO6_DITHER_ENABLE;
- }
- else
- pfit_control |= intel_crtc->pipe << PFIT_PIPE_SHIFT;
-
- I915_WRITE(PFIT_CONTROL, pfit_control);
+ I915_WRITE(PFIT_PGM_RATIOS, lvds_priv->pfit_pgm_ratios);
+ I915_WRITE(PFIT_CONTROL, lvds_priv->pfit_control);
}
/**
@@ -406,6 +663,34 @@
struct drm_property *property,
uint64_t value)
{
+ struct drm_device *dev = connector->dev;
+ struct intel_output *intel_output =
+ to_intel_output(connector);
+
+ if (property == dev->mode_config.scaling_mode_property &&
+ connector->encoder) {
+ struct drm_crtc *crtc = connector->encoder->crtc;
+ struct intel_lvds_priv *lvds_priv = intel_output->dev_priv;
+ if (value == DRM_MODE_SCALE_NON_GPU) {
+ DRM_DEBUG_KMS(I915_LVDS,
+ "non_GPU property is unsupported\n");
+ return 0;
+ }
+ if (lvds_priv->fitting_mode == value) {
+ /* the LVDS scaling property is not changed */
+ return 0;
+ }
+ lvds_priv->fitting_mode = value;
+ if (crtc && crtc->enabled) {
+ /*
+ * If the CRTC is enabled, the display will be changed
+ * according to the new panel fitting mode.
+ */
+ drm_crtc_helper_set_mode(crtc, &crtc->mode,
+ crtc->x, crtc->y, crtc->fb);
+ }
+ }
+
return 0;
}
@@ -456,7 +741,7 @@
.callback = intel_no_lvds_dmi_callback,
.ident = "Apple Mac Mini (Core series)",
.matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+ DMI_MATCH(DMI_SYS_VENDOR, "Apple"),
DMI_MATCH(DMI_PRODUCT_NAME, "Macmini1,1"),
},
},
@@ -464,7 +749,7 @@
.callback = intel_no_lvds_dmi_callback,
.ident = "Apple Mac Mini (Core 2 series)",
.matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+ DMI_MATCH(DMI_SYS_VENDOR, "Apple"),
DMI_MATCH(DMI_PRODUCT_NAME, "Macmini2,1"),
},
},
@@ -518,6 +803,7 @@
struct drm_encoder *encoder;
struct drm_display_mode *scan; /* *modes, *bios_mode; */
struct drm_crtc *crtc;
+ struct intel_lvds_priv *lvds_priv;
u32 lvds;
int pipe, gpio = GPIOC;
@@ -531,7 +817,8 @@
gpio = PCH_GPIOC;
}
- intel_output = kzalloc(sizeof(struct intel_output), GFP_KERNEL);
+ intel_output = kzalloc(sizeof(struct intel_output) +
+ sizeof(struct intel_lvds_priv), GFP_KERNEL);
if (!intel_output) {
return;
}
@@ -553,7 +840,18 @@
connector->interlace_allowed = false;
connector->doublescan_allowed = false;
+ lvds_priv = (struct intel_lvds_priv *)(intel_output + 1);
+ intel_output->dev_priv = lvds_priv;
+ /* create the scaling mode property */
+ drm_mode_create_scaling_mode_property(dev);
+ /*
+ * the initial panel fitting mode will be FULL_SCREEN.
+ */
+ drm_connector_attach_property(&intel_output->base,
+ dev->mode_config.scaling_mode_property,
+ DRM_MODE_SCALE_FULLSCREEN);
+ lvds_priv->fitting_mode = DRM_MODE_SCALE_FULLSCREEN;
/*
* LVDS discovery:
* 1) check for EDID on DDC
@@ -649,5 +947,5 @@
if (intel_output->ddc_bus)
intel_i2c_destroy(intel_output->ddc_bus);
drm_connector_cleanup(connector);
- kfree(connector);
+ kfree(intel_output);
}
diff --git a/drivers/gpu/drm/i915/intel_modes.c b/drivers/gpu/drm/i915/intel_modes.c
index e0910fe..67e2f46 100644
--- a/drivers/gpu/drm/i915/intel_modes.c
+++ b/drivers/gpu/drm/i915/intel_modes.c
@@ -53,10 +53,9 @@
}
};
- intel_i2c_quirk_set(intel_output->ddc_bus->drm_dev, true);
- ret = i2c_transfer(&intel_output->ddc_bus->adapter, msgs, 2);
- intel_i2c_quirk_set(intel_output->ddc_bus->drm_dev, false);
-
+ intel_i2c_quirk_set(intel_output->base.dev, true);
+ ret = i2c_transfer(intel_output->ddc_bus, msgs, 2);
+ intel_i2c_quirk_set(intel_output->base.dev, false);
if (ret == 2)
return true;
@@ -74,10 +73,9 @@
struct edid *edid;
int ret = 0;
- intel_i2c_quirk_set(intel_output->ddc_bus->drm_dev, true);
- edid = drm_get_edid(&intel_output->base,
- &intel_output->ddc_bus->adapter);
- intel_i2c_quirk_set(intel_output->ddc_bus->drm_dev, false);
+ intel_i2c_quirk_set(intel_output->base.dev, true);
+ edid = drm_get_edid(&intel_output->base, intel_output->ddc_bus);
+ intel_i2c_quirk_set(intel_output->base.dev, false);
if (edid) {
drm_mode_connector_update_edid_property(&intel_output->base,
edid);
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index 9a00adb3..f0347377 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -38,8 +38,7 @@
#undef SDVO_DEBUG
#define I915_SDVO "i915_sdvo"
struct intel_sdvo_priv {
- struct intel_i2c_chan *i2c_bus;
- int slaveaddr;
+ u8 slave_addr;
/* Register for the SDVO device: SDVOB or SDVOC */
int output_device;
@@ -146,13 +145,13 @@
struct i2c_msg msgs[] = {
{
- .addr = sdvo_priv->i2c_bus->slave_addr,
+ .addr = sdvo_priv->slave_addr >> 1,
.flags = 0,
.len = 1,
.buf = out_buf,
},
{
- .addr = sdvo_priv->i2c_bus->slave_addr,
+ .addr = sdvo_priv->slave_addr >> 1,
.flags = I2C_M_RD,
.len = 1,
.buf = buf,
@@ -162,7 +161,7 @@
out_buf[0] = addr;
out_buf[1] = 0;
- if ((ret = i2c_transfer(&sdvo_priv->i2c_bus->adapter, msgs, 2)) == 2)
+ if ((ret = i2c_transfer(intel_output->i2c_bus, msgs, 2)) == 2)
{
*ch = buf[0];
return true;
@@ -175,10 +174,11 @@
static bool intel_sdvo_write_byte(struct intel_output *intel_output, int addr,
u8 ch)
{
+ struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
u8 out_buf[2];
struct i2c_msg msgs[] = {
{
- .addr = intel_output->i2c_bus->slave_addr,
+ .addr = sdvo_priv->slave_addr >> 1,
.flags = 0,
.len = 2,
.buf = out_buf,
@@ -188,7 +188,7 @@
out_buf[0] = addr;
out_buf[1] = ch;
- if (i2c_transfer(&intel_output->i2c_bus->adapter, msgs, 1) == 1)
+ if (i2c_transfer(intel_output->i2c_bus, msgs, 1) == 1)
{
return true;
}
@@ -1369,9 +1369,8 @@
struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
struct edid *edid = NULL;
- intel_sdvo_set_control_bus_switch(intel_output, sdvo_priv->ddc_bus);
edid = drm_get_edid(&intel_output->base,
- &intel_output->ddc_bus->adapter);
+ intel_output->ddc_bus);
if (edid != NULL) {
sdvo_priv->is_hdmi = drm_detect_hdmi_monitor(edid);
kfree(edid);
@@ -1549,7 +1548,6 @@
static void intel_sdvo_get_lvds_modes(struct drm_connector *connector)
{
struct intel_output *intel_output = to_intel_output(connector);
- struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
struct drm_i915_private *dev_priv = connector->dev->dev_private;
/*
@@ -1557,8 +1555,6 @@
* Assume that the preferred modes are
* arranged in priority order.
*/
- /* set the bus switch and get the modes */
- intel_sdvo_set_control_bus_switch(intel_output, sdvo_priv->ddc_bus);
intel_ddc_get_modes(intel_output);
if (list_empty(&connector->probed_modes) == false)
return;
@@ -1709,7 +1705,7 @@
list_for_each_entry(connector,
&dev->mode_config.connector_list, head) {
- if (to_intel_output(connector)->ddc_bus == chan) {
+ if (to_intel_output(connector)->ddc_bus == &chan->adapter) {
intel_output = to_intel_output(connector);
break;
}
@@ -1723,7 +1719,7 @@
struct intel_output *intel_output;
struct intel_sdvo_priv *sdvo_priv;
struct i2c_algo_bit_data *algo_data;
- struct i2c_algorithm *algo;
+ const struct i2c_algorithm *algo;
algo_data = (struct i2c_algo_bit_data *)i2c_adap->algo_data;
intel_output =
@@ -1733,7 +1729,7 @@
return -EINVAL;
sdvo_priv = intel_output->dev_priv;
- algo = (struct i2c_algorithm *)intel_output->i2c_bus->adapter.algo;
+ algo = intel_output->i2c_bus->algo;
intel_sdvo_set_control_bus_switch(intel_output, sdvo_priv->ddc_bus);
return algo->master_xfer(i2c_adap, msgs, num);
@@ -1785,13 +1781,11 @@
struct drm_connector *connector;
struct intel_output *intel_output;
struct intel_sdvo_priv *sdvo_priv;
- struct intel_i2c_chan *i2cbus = NULL;
- struct intel_i2c_chan *ddcbus = NULL;
+
int connector_type;
u8 ch[0x40];
int i;
- int encoder_type, output_id;
- u8 slave_addr;
+ int encoder_type;
intel_output = kcalloc(sizeof(struct intel_output)+sizeof(struct intel_sdvo_priv), 1, GFP_KERNEL);
if (!intel_output) {
@@ -1799,29 +1793,24 @@
}
sdvo_priv = (struct intel_sdvo_priv *)(intel_output + 1);
+ sdvo_priv->output_device = output_device;
+
+ intel_output->dev_priv = sdvo_priv;
intel_output->type = INTEL_OUTPUT_SDVO;
/* setup the DDC bus. */
if (output_device == SDVOB)
- i2cbus = intel_i2c_create(dev, GPIOE, "SDVOCTRL_E for SDVOB");
+ intel_output->i2c_bus = intel_i2c_create(dev, GPIOE, "SDVOCTRL_E for SDVOB");
else
- i2cbus = intel_i2c_create(dev, GPIOE, "SDVOCTRL_E for SDVOC");
+ intel_output->i2c_bus = intel_i2c_create(dev, GPIOE, "SDVOCTRL_E for SDVOC");
- if (!i2cbus)
+ if (!intel_output->i2c_bus)
goto err_inteloutput;
- slave_addr = intel_sdvo_get_slave_addr(dev, output_device);
- sdvo_priv->i2c_bus = i2cbus;
+ sdvo_priv->slave_addr = intel_sdvo_get_slave_addr(dev, output_device);
- if (output_device == SDVOB) {
- output_id = 1;
- } else {
- output_id = 2;
- }
- sdvo_priv->i2c_bus->slave_addr = slave_addr >> 1;
- sdvo_priv->output_device = output_device;
- intel_output->i2c_bus = i2cbus;
- intel_output->dev_priv = sdvo_priv;
+ /* Save the bit-banging i2c functionality for use by the DDC wrapper */
+ intel_sdvo_i2c_bit_algo.functionality = intel_output->i2c_bus->algo->functionality;
/* Read the regs to test if we can talk to the device */
for (i = 0; i < 0x40; i++) {
@@ -1835,17 +1824,15 @@
/* setup the DDC bus. */
if (output_device == SDVOB)
- ddcbus = intel_i2c_create(dev, GPIOE, "SDVOB DDC BUS");
+ intel_output->ddc_bus = intel_i2c_create(dev, GPIOE, "SDVOB DDC BUS");
else
- ddcbus = intel_i2c_create(dev, GPIOE, "SDVOC DDC BUS");
+ intel_output->ddc_bus = intel_i2c_create(dev, GPIOE, "SDVOC DDC BUS");
- if (ddcbus == NULL)
+ if (intel_output->ddc_bus == NULL)
goto err_i2c;
- intel_sdvo_i2c_bit_algo.functionality =
- intel_output->i2c_bus->adapter.algo->functionality;
- ddcbus->adapter.algo = &intel_sdvo_i2c_bit_algo;
- intel_output->ddc_bus = ddcbus;
+ /* Wrap with our custom algo which switches to DDC mode */
+ intel_output->ddc_bus->algo = &intel_sdvo_i2c_bit_algo;
/* In defaut case sdvo lvds is false */
sdvo_priv->is_lvds = false;
@@ -1965,9 +1952,10 @@
return true;
err_i2c:
- if (ddcbus != NULL)
+ if (intel_output->ddc_bus != NULL)
intel_i2c_destroy(intel_output->ddc_bus);
- intel_i2c_destroy(intel_output->i2c_bus);
+ if (intel_output->i2c_bus != NULL)
+ intel_i2c_destroy(intel_output->i2c_bus);
err_inteloutput:
kfree(intel_output);
diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c
index ea68992..a43c98e 100644
--- a/drivers/gpu/drm/i915/intel_tv.c
+++ b/drivers/gpu/drm/i915/intel_tv.c
@@ -1383,34 +1383,31 @@
/*
* Detect TV by polling)
*/
- if (intel_output->load_detect_temp) {
- /* TV not currently running, prod it with destructive detect */
- save_tv_dac = tv_dac;
- tv_ctl = I915_READ(TV_CTL);
- save_tv_ctl = tv_ctl;
- tv_ctl &= ~TV_ENC_ENABLE;
- tv_ctl &= ~TV_TEST_MODE_MASK;
- tv_ctl |= TV_TEST_MODE_MONITOR_DETECT;
- tv_dac &= ~TVDAC_SENSE_MASK;
- tv_dac &= ~DAC_A_MASK;
- tv_dac &= ~DAC_B_MASK;
- tv_dac &= ~DAC_C_MASK;
- tv_dac |= (TVDAC_STATE_CHG_EN |
- TVDAC_A_SENSE_CTL |
- TVDAC_B_SENSE_CTL |
- TVDAC_C_SENSE_CTL |
- DAC_CTL_OVERRIDE |
- DAC_A_0_7_V |
- DAC_B_0_7_V |
- DAC_C_0_7_V);
- I915_WRITE(TV_CTL, tv_ctl);
- I915_WRITE(TV_DAC, tv_dac);
- intel_wait_for_vblank(dev);
- tv_dac = I915_READ(TV_DAC);
- I915_WRITE(TV_DAC, save_tv_dac);
- I915_WRITE(TV_CTL, save_tv_ctl);
- intel_wait_for_vblank(dev);
- }
+ save_tv_dac = tv_dac;
+ tv_ctl = I915_READ(TV_CTL);
+ save_tv_ctl = tv_ctl;
+ tv_ctl &= ~TV_ENC_ENABLE;
+ tv_ctl &= ~TV_TEST_MODE_MASK;
+ tv_ctl |= TV_TEST_MODE_MONITOR_DETECT;
+ tv_dac &= ~TVDAC_SENSE_MASK;
+ tv_dac &= ~DAC_A_MASK;
+ tv_dac &= ~DAC_B_MASK;
+ tv_dac &= ~DAC_C_MASK;
+ tv_dac |= (TVDAC_STATE_CHG_EN |
+ TVDAC_A_SENSE_CTL |
+ TVDAC_B_SENSE_CTL |
+ TVDAC_C_SENSE_CTL |
+ DAC_CTL_OVERRIDE |
+ DAC_A_0_7_V |
+ DAC_B_0_7_V |
+ DAC_C_0_7_V);
+ I915_WRITE(TV_CTL, tv_ctl);
+ I915_WRITE(TV_DAC, tv_dac);
+ intel_wait_for_vblank(dev);
+ tv_dac = I915_READ(TV_DAC);
+ I915_WRITE(TV_DAC, save_tv_dac);
+ I915_WRITE(TV_CTL, save_tv_ctl);
+ intel_wait_for_vblank(dev);
/*
* A B C
* 0 1 1 Composite
diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c
index f30aa72..f97563d 100644
--- a/drivers/gpu/drm/radeon/radeon_device.c
+++ b/drivers/gpu/drm/radeon/radeon_device.c
@@ -35,6 +35,23 @@
#include "atom.h"
/*
+ * Clear GPU surface registers.
+ */
+static void radeon_surface_init(struct radeon_device *rdev)
+{
+ /* FIXME: check this out */
+ if (rdev->family < CHIP_R600) {
+ int i;
+
+ for (i = 0; i < 8; i++) {
+ WREG32(RADEON_SURFACE0_INFO +
+ i * (RADEON_SURFACE1_INFO - RADEON_SURFACE0_INFO),
+ 0);
+ }
+ }
+}
+
+/*
* GPU scratch registers helpers function.
*/
static void radeon_scratch_init(struct radeon_device *rdev)
@@ -496,6 +513,8 @@
radeon_errata(rdev);
/* Initialize scratch registers */
radeon_scratch_init(rdev);
+ /* Initialize surface registers */
+ radeon_surface_init(rdev);
/* TODO: disable VGA need to use VGA request */
/* BIOS*/
@@ -604,9 +623,6 @@
if (r) {
return r;
}
- if (rdev->fbdev_rfb && rdev->fbdev_rfb->obj) {
- rdev->fbdev_robj = rdev->fbdev_rfb->obj->driver_private;
- }
if (!ret) {
DRM_INFO("radeon: kernel modesetting successfully initialized.\n");
}
diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c
index 09c9fb9..84ba69f 100644
--- a/drivers/gpu/drm/radeon/radeon_drv.c
+++ b/drivers/gpu/drm/radeon/radeon_drv.c
@@ -345,7 +345,7 @@
drm_exit(driver);
}
-late_initcall(radeon_init);
+module_init(radeon_init);
module_exit(radeon_exit);
MODULE_AUTHOR(DRIVER_AUTHOR);
diff --git a/drivers/gpu/drm/radeon/radeon_fb.c b/drivers/gpu/drm/radeon/radeon_fb.c
index fa86d39..9e8f191 100644
--- a/drivers/gpu/drm/radeon/radeon_fb.c
+++ b/drivers/gpu/drm/radeon/radeon_fb.c
@@ -478,14 +478,16 @@
{
struct fb_info *info;
struct radeon_fb_device *rfbdev;
- struct drm_framebuffer *fb;
+ struct drm_framebuffer *fb = NULL;
struct radeon_framebuffer *rfb;
struct drm_mode_fb_cmd mode_cmd;
struct drm_gem_object *gobj = NULL;
struct radeon_object *robj = NULL;
struct device *device = &rdev->pdev->dev;
int size, aligned_size, ret;
+ u64 fb_gpuaddr;
void *fbptr = NULL;
+ unsigned long tmp;
mode_cmd.width = surface_width;
mode_cmd.height = surface_height;
@@ -498,11 +500,12 @@
aligned_size = ALIGN(size, PAGE_SIZE);
ret = radeon_gem_object_create(rdev, aligned_size, 0,
- RADEON_GEM_DOMAIN_VRAM,
- false, ttm_bo_type_kernel,
- false, &gobj);
+ RADEON_GEM_DOMAIN_VRAM,
+ false, ttm_bo_type_kernel,
+ false, &gobj);
if (ret) {
- printk(KERN_ERR "failed to allocate framebuffer\n");
+ printk(KERN_ERR "failed to allocate framebuffer (%d %d)\n",
+ surface_width, surface_height);
ret = -ENOMEM;
goto out;
}
@@ -515,12 +518,19 @@
ret = -ENOMEM;
goto out_unref;
}
+ ret = radeon_object_pin(robj, RADEON_GEM_DOMAIN_VRAM, &fb_gpuaddr);
+ if (ret) {
+ printk(KERN_ERR "failed to pin framebuffer\n");
+ ret = -ENOMEM;
+ goto out_unref;
+ }
list_add(&fb->filp_head, &rdev->ddev->mode_config.fb_kernel_list);
rfb = to_radeon_framebuffer(fb);
*rfb_p = rfb;
rdev->fbdev_rfb = rfb;
+ rdev->fbdev_robj = robj;
info = framebuffer_alloc(sizeof(struct radeon_fb_device), device);
if (info == NULL) {
@@ -541,13 +551,13 @@
info->fix.xpanstep = 1; /* doing it in hw */
info->fix.ypanstep = 1; /* doing it in hw */
info->fix.ywrapstep = 0;
- info->fix.accel = FB_ACCEL_I830;
+ info->fix.accel = FB_ACCEL_NONE;
info->fix.type_aux = 0;
info->flags = FBINFO_DEFAULT;
info->fbops = &radeonfb_ops;
info->fix.line_length = fb->pitch;
- info->screen_base = fbptr;
- info->fix.smem_start = (unsigned long)fbptr;
+ tmp = fb_gpuaddr - rdev->mc.vram_location;
+ info->fix.smem_start = rdev->mc.aper_base + tmp;
info->fix.smem_len = size;
info->screen_base = fbptr;
info->screen_size = size;
@@ -562,8 +572,8 @@
info->var.width = -1;
info->var.xres = fb_width;
info->var.yres = fb_height;
- info->fix.mmio_start = pci_resource_start(rdev->pdev, 2);
- info->fix.mmio_len = pci_resource_len(rdev->pdev, 2);
+ info->fix.mmio_start = 0;
+ info->fix.mmio_len = 0;
info->pixmap.size = 64*1024;
info->pixmap.buf_align = 8;
info->pixmap.access_align = 32;
@@ -644,7 +654,7 @@
if (robj) {
radeon_object_kunmap(robj);
}
- if (ret) {
+ if (fb && ret) {
list_del(&fb->filp_head);
drm_gem_object_unreference(gobj);
drm_framebuffer_cleanup(fb);
@@ -813,6 +823,7 @@
robj = rfb->obj->driver_private;
unregister_framebuffer(info);
radeon_object_kunmap(robj);
+ radeon_object_unpin(robj);
framebuffer_release(info);
}
diff --git a/drivers/gpu/drm/radeon/radeon_object.c b/drivers/gpu/drm/radeon/radeon_object.c
index 983e8df..bac0d06 100644
--- a/drivers/gpu/drm/radeon/radeon_object.c
+++ b/drivers/gpu/drm/radeon/radeon_object.c
@@ -223,7 +223,6 @@
{
uint32_t flags;
uint32_t tmp;
- void *fbptr;
int r;
flags = radeon_object_flags_from_domain(domain);
@@ -242,10 +241,6 @@
DRM_ERROR("radeon: failed to reserve object for pinning it.\n");
return r;
}
- if (robj->rdev->fbdev_robj == robj) {
- mutex_lock(&robj->rdev->fbdev_info->lock);
- radeon_object_kunmap(robj);
- }
tmp = robj->tobj.mem.placement;
ttm_flag_masked(&tmp, flags, TTM_PL_MASK_MEM);
robj->tobj.proposed_placement = tmp | TTM_PL_FLAG_NO_EVICT | TTM_PL_MASK_CACHING;
@@ -261,23 +256,12 @@
DRM_ERROR("radeon: failed to pin object.\n");
}
radeon_object_unreserve(robj);
- if (robj->rdev->fbdev_robj == robj) {
- if (!r) {
- r = radeon_object_kmap(robj, &fbptr);
- }
- if (!r) {
- robj->rdev->fbdev_info->screen_base = fbptr;
- robj->rdev->fbdev_info->fix.smem_start = (unsigned long)fbptr;
- }
- mutex_unlock(&robj->rdev->fbdev_info->lock);
- }
return r;
}
void radeon_object_unpin(struct radeon_object *robj)
{
uint32_t flags;
- void *fbptr;
int r;
spin_lock(&robj->tobj.lock);
@@ -297,10 +281,6 @@
DRM_ERROR("radeon: failed to reserve object for unpinning it.\n");
return;
}
- if (robj->rdev->fbdev_robj == robj) {
- mutex_lock(&robj->rdev->fbdev_info->lock);
- radeon_object_kunmap(robj);
- }
flags = robj->tobj.mem.placement;
robj->tobj.proposed_placement = flags & ~TTM_PL_FLAG_NO_EVICT;
r = ttm_buffer_object_validate(&robj->tobj,
@@ -310,16 +290,6 @@
DRM_ERROR("radeon: failed to unpin buffer.\n");
}
radeon_object_unreserve(robj);
- if (robj->rdev->fbdev_robj == robj) {
- if (!r) {
- r = radeon_object_kmap(robj, &fbptr);
- }
- if (!r) {
- robj->rdev->fbdev_info->screen_base = fbptr;
- robj->rdev->fbdev_info->fix.smem_start = (unsigned long)fbptr;
- }
- mutex_unlock(&robj->rdev->fbdev_info->lock);
- }
}
int radeon_object_wait(struct radeon_object *robj)
diff --git a/drivers/gpu/drm/ttm/ttm_bo_util.c b/drivers/gpu/drm/ttm/ttm_bo_util.c
index 517c845..bdec583 100644
--- a/drivers/gpu/drm/ttm/ttm_bo_util.c
+++ b/drivers/gpu/drm/ttm/ttm_bo_util.c
@@ -34,7 +34,6 @@
#include <linux/highmem.h>
#include <linux/wait.h>
#include <linux/vmalloc.h>
-#include <linux/version.h>
#include <linux/module.h>
void ttm_bo_free_old_node(struct ttm_buffer_object *bo)
diff --git a/drivers/gpu/drm/ttm/ttm_bo_vm.c b/drivers/gpu/drm/ttm/ttm_bo_vm.c
index 27b146c..40b7503 100644
--- a/drivers/gpu/drm/ttm/ttm_bo_vm.c
+++ b/drivers/gpu/drm/ttm/ttm_bo_vm.c
@@ -32,7 +32,6 @@
#include <ttm/ttm_bo_driver.h>
#include <ttm/ttm_placement.h>
#include <linux/mm.h>
-#include <linux/version.h>
#include <linux/rbtree.h>
#include <linux/module.h>
#include <linux/uaccess.h>
diff --git a/drivers/gpu/drm/ttm/ttm_tt.c b/drivers/gpu/drm/ttm/ttm_tt.c
index 0331fa7..75dc8bd 100644
--- a/drivers/gpu/drm/ttm/ttm_tt.c
+++ b/drivers/gpu/drm/ttm/ttm_tt.c
@@ -28,7 +28,6 @@
* Authors: Thomas Hellstrom <thellstrom-at-vmware-dot-com>
*/
-#include <linux/version.h>
#include <linux/vmalloc.h>
#include <linux/sched.h>
#include <linux/highmem.h>
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 3c259ee..8206442 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -326,6 +326,16 @@
devices such as DaVinci NIC.
For details please see http://www.ti.com/davinci
+config I2C_DESIGNWARE
+ tristate "Synopsys DesignWare"
+ depends on HAVE_CLK
+ help
+ If you say yes to this option, support will be included for the
+ Synopsys DesignWare I2C adapter. Only master mode is supported.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-designware.
+
config I2C_GPIO
tristate "GPIO-based bitbanging I2C"
depends on GENERIC_GPIO
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index edeabf0..e654263b 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -30,6 +30,7 @@
obj-$(CONFIG_I2C_BLACKFIN_TWI) += i2c-bfin-twi.o
obj-$(CONFIG_I2C_CPM) += i2c-cpm.o
obj-$(CONFIG_I2C_DAVINCI) += i2c-davinci.o
+obj-$(CONFIG_I2C_DESIGNWARE) += i2c-designware.o
obj-$(CONFIG_I2C_GPIO) += i2c-gpio.o
obj-$(CONFIG_I2C_HIGHLANDER) += i2c-highlander.o
obj-$(CONFIG_I2C_IBM_IIC) += i2c-ibm_iic.o
diff --git a/drivers/i2c/busses/i2c-designware.c b/drivers/i2c/busses/i2c-designware.c
new file mode 100644
index 0000000..b444762
--- /dev/null
+++ b/drivers/i2c/busses/i2c-designware.c
@@ -0,0 +1,624 @@
+/*
+ * Synopsys Designware I2C adapter driver (master only).
+ *
+ * Based on the TI DAVINCI I2C adapter driver.
+ *
+ * Copyright (C) 2006 Texas Instruments.
+ * Copyright (C) 2007 MontaVista Software Inc.
+ * Copyright (C) 2009 Provigent Ltd.
+ *
+ * ----------------------------------------------------------------------------
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ * ----------------------------------------------------------------------------
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/clk.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+/*
+ * Registers offset
+ */
+#define DW_IC_CON 0x0
+#define DW_IC_TAR 0x4
+#define DW_IC_DATA_CMD 0x10
+#define DW_IC_SS_SCL_HCNT 0x14
+#define DW_IC_SS_SCL_LCNT 0x18
+#define DW_IC_FS_SCL_HCNT 0x1c
+#define DW_IC_FS_SCL_LCNT 0x20
+#define DW_IC_INTR_STAT 0x2c
+#define DW_IC_INTR_MASK 0x30
+#define DW_IC_CLR_INTR 0x40
+#define DW_IC_ENABLE 0x6c
+#define DW_IC_STATUS 0x70
+#define DW_IC_TXFLR 0x74
+#define DW_IC_RXFLR 0x78
+#define DW_IC_COMP_PARAM_1 0xf4
+#define DW_IC_TX_ABRT_SOURCE 0x80
+
+#define DW_IC_CON_MASTER 0x1
+#define DW_IC_CON_SPEED_STD 0x2
+#define DW_IC_CON_SPEED_FAST 0x4
+#define DW_IC_CON_10BITADDR_MASTER 0x10
+#define DW_IC_CON_RESTART_EN 0x20
+#define DW_IC_CON_SLAVE_DISABLE 0x40
+
+#define DW_IC_INTR_TX_EMPTY 0x10
+#define DW_IC_INTR_TX_ABRT 0x40
+#define DW_IC_INTR_STOP_DET 0x200
+
+#define DW_IC_STATUS_ACTIVITY 0x1
+
+#define DW_IC_ERR_TX_ABRT 0x1
+
+/*
+ * status codes
+ */
+#define STATUS_IDLE 0x0
+#define STATUS_WRITE_IN_PROGRESS 0x1
+#define STATUS_READ_IN_PROGRESS 0x2
+
+#define TIMEOUT 20 /* ms */
+
+/*
+ * hardware abort codes from the DW_IC_TX_ABRT_SOURCE register
+ *
+ * only expected abort codes are listed here
+ * refer to the datasheet for the full list
+ */
+#define ABRT_7B_ADDR_NOACK 0
+#define ABRT_10ADDR1_NOACK 1
+#define ABRT_10ADDR2_NOACK 2
+#define ABRT_TXDATA_NOACK 3
+#define ABRT_GCALL_NOACK 4
+#define ABRT_GCALL_READ 5
+#define ABRT_SBYTE_ACKDET 7
+#define ABRT_SBYTE_NORSTRT 9
+#define ABRT_10B_RD_NORSTRT 10
+#define ARB_MASTER_DIS 11
+#define ARB_LOST 12
+
+static char *abort_sources[] = {
+ [ABRT_7B_ADDR_NOACK] =
+ "slave address not acknowledged (7bit mode)",
+ [ABRT_10ADDR1_NOACK] =
+ "first address byte not acknowledged (10bit mode)",
+ [ABRT_10ADDR2_NOACK] =
+ "second address byte not acknowledged (10bit mode)",
+ [ABRT_TXDATA_NOACK] =
+ "data not acknowledged",
+ [ABRT_GCALL_NOACK] =
+ "no acknowledgement for a general call",
+ [ABRT_GCALL_READ] =
+ "read after general call",
+ [ABRT_SBYTE_ACKDET] =
+ "start byte acknowledged",
+ [ABRT_SBYTE_NORSTRT] =
+ "trying to send start byte when restart is disabled",
+ [ABRT_10B_RD_NORSTRT] =
+ "trying to read when restart is disabled (10bit mode)",
+ [ARB_MASTER_DIS] =
+ "trying to use disabled adapter",
+ [ARB_LOST] =
+ "lost arbitration",
+};
+
+/**
+ * struct dw_i2c_dev - private i2c-designware data
+ * @dev: driver model device node
+ * @base: IO registers pointer
+ * @cmd_complete: tx completion indicator
+ * @pump_msg: continue in progress transfers
+ * @lock: protect this struct and IO registers
+ * @clk: input reference clock
+ * @cmd_err: run time hadware error code
+ * @msgs: points to an array of messages currently being transfered
+ * @msgs_num: the number of elements in msgs
+ * @msg_write_idx: the element index of the current tx message in the msgs
+ * array
+ * @tx_buf_len: the length of the current tx buffer
+ * @tx_buf: the current tx buffer
+ * @msg_read_idx: the element index of the current rx message in the msgs
+ * array
+ * @rx_buf_len: the length of the current rx buffer
+ * @rx_buf: the current rx buffer
+ * @msg_err: error status of the current transfer
+ * @status: i2c master status, one of STATUS_*
+ * @abort_source: copy of the TX_ABRT_SOURCE register
+ * @irq: interrupt number for the i2c master
+ * @adapter: i2c subsystem adapter node
+ * @tx_fifo_depth: depth of the hardware tx fifo
+ * @rx_fifo_depth: depth of the hardware rx fifo
+ */
+struct dw_i2c_dev {
+ struct device *dev;
+ void __iomem *base;
+ struct completion cmd_complete;
+ struct tasklet_struct pump_msg;
+ struct mutex lock;
+ struct clk *clk;
+ int cmd_err;
+ struct i2c_msg *msgs;
+ int msgs_num;
+ int msg_write_idx;
+ u16 tx_buf_len;
+ u8 *tx_buf;
+ int msg_read_idx;
+ u16 rx_buf_len;
+ u8 *rx_buf;
+ int msg_err;
+ unsigned int status;
+ u16 abort_source;
+ int irq;
+ struct i2c_adapter adapter;
+ unsigned int tx_fifo_depth;
+ unsigned int rx_fifo_depth;
+};
+
+/**
+ * i2c_dw_init() - initialize the designware i2c master hardware
+ * @dev: device private data
+ *
+ * This functions configures and enables the I2C master.
+ * This function is called during I2C init function, and in case of timeout at
+ * run time.
+ */
+static void i2c_dw_init(struct dw_i2c_dev *dev)
+{
+ u32 input_clock_khz = clk_get_rate(dev->clk) / 1000;
+ u16 ic_con;
+
+ /* Disable the adapter */
+ writeb(0, dev->base + DW_IC_ENABLE);
+
+ /* set standard and fast speed deviders for high/low periods */
+ writew((input_clock_khz * 40 / 10000)+1, /* std speed high, 4us */
+ dev->base + DW_IC_SS_SCL_HCNT);
+ writew((input_clock_khz * 47 / 10000)+1, /* std speed low, 4.7us */
+ dev->base + DW_IC_SS_SCL_LCNT);
+ writew((input_clock_khz * 6 / 10000)+1, /* fast speed high, 0.6us */
+ dev->base + DW_IC_FS_SCL_HCNT);
+ writew((input_clock_khz * 13 / 10000)+1, /* fast speed low, 1.3us */
+ dev->base + DW_IC_FS_SCL_LCNT);
+
+ /* configure the i2c master */
+ ic_con = DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE |
+ DW_IC_CON_RESTART_EN | DW_IC_CON_SPEED_FAST;
+ writew(ic_con, dev->base + DW_IC_CON);
+}
+
+/*
+ * Waiting for bus not busy
+ */
+static int i2c_dw_wait_bus_not_busy(struct dw_i2c_dev *dev)
+{
+ int timeout = TIMEOUT;
+
+ while (readb(dev->base + DW_IC_STATUS) & DW_IC_STATUS_ACTIVITY) {
+ if (timeout <= 0) {
+ dev_warn(dev->dev, "timeout waiting for bus ready\n");
+ return -ETIMEDOUT;
+ }
+ timeout--;
+ mdelay(1);
+ }
+
+ return 0;
+}
+
+/*
+ * Initiate low level master read/write transaction.
+ * This function is called from i2c_dw_xfer when starting a transfer.
+ * This function is also called from dw_i2c_pump_msg to continue a transfer
+ * that is longer than the size of the TX FIFO.
+ */
+static void
+i2c_dw_xfer_msg(struct i2c_adapter *adap)
+{
+ struct dw_i2c_dev *dev = i2c_get_adapdata(adap);
+ struct i2c_msg *msgs = dev->msgs;
+ int num = dev->msgs_num;
+ u16 ic_con, intr_mask;
+ int tx_limit = dev->tx_fifo_depth - readb(dev->base + DW_IC_TXFLR);
+ int rx_limit = dev->rx_fifo_depth - readb(dev->base + DW_IC_RXFLR);
+ u16 addr = msgs[dev->msg_write_idx].addr;
+ u16 buf_len = dev->tx_buf_len;
+
+ if (!(dev->status & STATUS_WRITE_IN_PROGRESS)) {
+ /* Disable the adapter */
+ writeb(0, dev->base + DW_IC_ENABLE);
+
+ /* set the slave (target) address */
+ writew(msgs[dev->msg_write_idx].addr, dev->base + DW_IC_TAR);
+
+ /* if the slave address is ten bit address, enable 10BITADDR */
+ ic_con = readw(dev->base + DW_IC_CON);
+ if (msgs[dev->msg_write_idx].flags & I2C_M_TEN)
+ ic_con |= DW_IC_CON_10BITADDR_MASTER;
+ else
+ ic_con &= ~DW_IC_CON_10BITADDR_MASTER;
+ writew(ic_con, dev->base + DW_IC_CON);
+
+ /* Enable the adapter */
+ writeb(1, dev->base + DW_IC_ENABLE);
+ }
+
+ for (; dev->msg_write_idx < num; dev->msg_write_idx++) {
+ /* if target address has changed, we need to
+ * reprogram the target address in the i2c
+ * adapter when we are done with this transfer
+ */
+ if (msgs[dev->msg_write_idx].addr != addr)
+ return;
+
+ if (msgs[dev->msg_write_idx].len == 0) {
+ dev_err(dev->dev,
+ "%s: invalid message length\n", __func__);
+ dev->msg_err = -EINVAL;
+ return;
+ }
+
+ if (!(dev->status & STATUS_WRITE_IN_PROGRESS)) {
+ /* new i2c_msg */
+ dev->tx_buf = msgs[dev->msg_write_idx].buf;
+ buf_len = msgs[dev->msg_write_idx].len;
+ }
+
+ while (buf_len > 0 && tx_limit > 0 && rx_limit > 0) {
+ if (msgs[dev->msg_write_idx].flags & I2C_M_RD) {
+ writew(0x100, dev->base + DW_IC_DATA_CMD);
+ rx_limit--;
+ } else
+ writew(*(dev->tx_buf++),
+ dev->base + DW_IC_DATA_CMD);
+ tx_limit--; buf_len--;
+ }
+ }
+
+ intr_mask = DW_IC_INTR_STOP_DET | DW_IC_INTR_TX_ABRT;
+ if (buf_len > 0) { /* more bytes to be written */
+ intr_mask |= DW_IC_INTR_TX_EMPTY;
+ dev->status |= STATUS_WRITE_IN_PROGRESS;
+ } else
+ dev->status &= ~STATUS_WRITE_IN_PROGRESS;
+ writew(intr_mask, dev->base + DW_IC_INTR_MASK);
+
+ dev->tx_buf_len = buf_len;
+}
+
+static void
+i2c_dw_read(struct i2c_adapter *adap)
+{
+ struct dw_i2c_dev *dev = i2c_get_adapdata(adap);
+ struct i2c_msg *msgs = dev->msgs;
+ int num = dev->msgs_num;
+ u16 addr = msgs[dev->msg_read_idx].addr;
+ int rx_valid = readw(dev->base + DW_IC_RXFLR);
+
+ for (; dev->msg_read_idx < num; dev->msg_read_idx++) {
+ u16 len;
+ u8 *buf;
+
+ if (!(msgs[dev->msg_read_idx].flags & I2C_M_RD))
+ continue;
+
+ /* different i2c client, reprogram the i2c adapter */
+ if (msgs[dev->msg_read_idx].addr != addr)
+ return;
+
+ if (!(dev->status & STATUS_READ_IN_PROGRESS)) {
+ len = msgs[dev->msg_read_idx].len;
+ buf = msgs[dev->msg_read_idx].buf;
+ } else {
+ len = dev->rx_buf_len;
+ buf = dev->rx_buf;
+ }
+
+ for (; len > 0 && rx_valid > 0; len--, rx_valid--)
+ *buf++ = readb(dev->base + DW_IC_DATA_CMD);
+
+ if (len > 0) {
+ dev->status |= STATUS_READ_IN_PROGRESS;
+ dev->rx_buf_len = len;
+ dev->rx_buf = buf;
+ return;
+ } else
+ dev->status &= ~STATUS_READ_IN_PROGRESS;
+ }
+}
+
+/*
+ * Prepare controller for a transaction and call i2c_dw_xfer_msg
+ */
+static int
+i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
+{
+ struct dw_i2c_dev *dev = i2c_get_adapdata(adap);
+ int ret;
+
+ dev_dbg(dev->dev, "%s: msgs: %d\n", __func__, num);
+
+ mutex_lock(&dev->lock);
+
+ INIT_COMPLETION(dev->cmd_complete);
+ dev->msgs = msgs;
+ dev->msgs_num = num;
+ dev->cmd_err = 0;
+ dev->msg_write_idx = 0;
+ dev->msg_read_idx = 0;
+ dev->msg_err = 0;
+ dev->status = STATUS_IDLE;
+
+ ret = i2c_dw_wait_bus_not_busy(dev);
+ if (ret < 0)
+ goto done;
+
+ /* start the transfers */
+ i2c_dw_xfer_msg(adap);
+
+ /* wait for tx to complete */
+ ret = wait_for_completion_interruptible_timeout(&dev->cmd_complete, HZ);
+ if (ret == 0) {
+ dev_err(dev->dev, "controller timed out\n");
+ i2c_dw_init(dev);
+ ret = -ETIMEDOUT;
+ goto done;
+ } else if (ret < 0)
+ goto done;
+
+ if (dev->msg_err) {
+ ret = dev->msg_err;
+ goto done;
+ }
+
+ /* no error */
+ if (likely(!dev->cmd_err)) {
+ /* read rx fifo, and disable the adapter */
+ do {
+ i2c_dw_read(adap);
+ } while (dev->status & STATUS_READ_IN_PROGRESS);
+ writeb(0, dev->base + DW_IC_ENABLE);
+ ret = num;
+ goto done;
+ }
+
+ /* We have an error */
+ if (dev->cmd_err == DW_IC_ERR_TX_ABRT) {
+ unsigned long abort_source = dev->abort_source;
+ int i;
+
+ for_each_bit(i, &abort_source, ARRAY_SIZE(abort_sources)) {
+ dev_err(dev->dev, "%s: %s\n", __func__, abort_sources[i]);
+ }
+ }
+ ret = -EIO;
+
+done:
+ mutex_unlock(&dev->lock);
+
+ return ret;
+}
+
+static u32 i2c_dw_func(struct i2c_adapter *adap)
+{
+ return I2C_FUNC_I2C | I2C_FUNC_10BIT_ADDR;
+}
+
+static void dw_i2c_pump_msg(unsigned long data)
+{
+ struct dw_i2c_dev *dev = (struct dw_i2c_dev *) data;
+ u16 intr_mask;
+
+ i2c_dw_read(&dev->adapter);
+ i2c_dw_xfer_msg(&dev->adapter);
+
+ intr_mask = DW_IC_INTR_STOP_DET | DW_IC_INTR_TX_ABRT;
+ if (dev->status & STATUS_WRITE_IN_PROGRESS)
+ intr_mask |= DW_IC_INTR_TX_EMPTY;
+ writew(intr_mask, dev->base + DW_IC_INTR_MASK);
+}
+
+/*
+ * Interrupt service routine. This gets called whenever an I2C interrupt
+ * occurs.
+ */
+static irqreturn_t i2c_dw_isr(int this_irq, void *dev_id)
+{
+ struct dw_i2c_dev *dev = dev_id;
+ u16 stat;
+
+ stat = readw(dev->base + DW_IC_INTR_STAT);
+ dev_dbg(dev->dev, "%s: stat=0x%x\n", __func__, stat);
+ if (stat & DW_IC_INTR_TX_ABRT) {
+ dev->abort_source = readw(dev->base + DW_IC_TX_ABRT_SOURCE);
+ dev->cmd_err |= DW_IC_ERR_TX_ABRT;
+ dev->status = STATUS_IDLE;
+ } else if (stat & DW_IC_INTR_TX_EMPTY)
+ tasklet_schedule(&dev->pump_msg);
+
+ readb(dev->base + DW_IC_CLR_INTR); /* clear interrupts */
+ writew(0, dev->base + DW_IC_INTR_MASK); /* disable interrupts */
+ if (stat & (DW_IC_INTR_TX_ABRT | DW_IC_INTR_STOP_DET))
+ complete(&dev->cmd_complete);
+
+ return IRQ_HANDLED;
+}
+
+static struct i2c_algorithm i2c_dw_algo = {
+ .master_xfer = i2c_dw_xfer,
+ .functionality = i2c_dw_func,
+};
+
+static int __devinit dw_i2c_probe(struct platform_device *pdev)
+{
+ struct dw_i2c_dev *dev;
+ struct i2c_adapter *adap;
+ struct resource *mem, *irq, *ioarea;
+ int r;
+
+ /* NOTE: driver uses the static register mapping */
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!mem) {
+ dev_err(&pdev->dev, "no mem resource?\n");
+ return -EINVAL;
+ }
+
+ irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (!irq) {
+ dev_err(&pdev->dev, "no irq resource?\n");
+ return -EINVAL;
+ }
+
+ ioarea = request_mem_region(mem->start, resource_size(mem),
+ pdev->name);
+ if (!ioarea) {
+ dev_err(&pdev->dev, "I2C region already claimed\n");
+ return -EBUSY;
+ }
+
+ dev = kzalloc(sizeof(struct dw_i2c_dev), GFP_KERNEL);
+ if (!dev) {
+ r = -ENOMEM;
+ goto err_release_region;
+ }
+
+ init_completion(&dev->cmd_complete);
+ tasklet_init(&dev->pump_msg, dw_i2c_pump_msg, (unsigned long) dev);
+ mutex_init(&dev->lock);
+ dev->dev = get_device(&pdev->dev);
+ dev->irq = irq->start;
+ platform_set_drvdata(pdev, dev);
+
+ dev->clk = clk_get(&pdev->dev, NULL);
+ if (IS_ERR(dev->clk)) {
+ r = -ENODEV;
+ goto err_free_mem;
+ }
+ clk_enable(dev->clk);
+
+ dev->base = ioremap(mem->start, resource_size(mem));
+ if (dev->base == NULL) {
+ dev_err(&pdev->dev, "failure mapping io resources\n");
+ r = -EBUSY;
+ goto err_unuse_clocks;
+ }
+ {
+ u32 param1 = readl(dev->base + DW_IC_COMP_PARAM_1);
+
+ dev->tx_fifo_depth = ((param1 >> 16) & 0xff) + 1;
+ dev->rx_fifo_depth = ((param1 >> 8) & 0xff) + 1;
+ }
+ i2c_dw_init(dev);
+
+ writew(0, dev->base + DW_IC_INTR_MASK); /* disable IRQ */
+ r = request_irq(dev->irq, i2c_dw_isr, 0, pdev->name, dev);
+ if (r) {
+ dev_err(&pdev->dev, "failure requesting irq %i\n", dev->irq);
+ goto err_iounmap;
+ }
+
+ adap = &dev->adapter;
+ i2c_set_adapdata(adap, dev);
+ adap->owner = THIS_MODULE;
+ adap->class = I2C_CLASS_HWMON;
+ strlcpy(adap->name, "Synopsys DesignWare I2C adapter",
+ sizeof(adap->name));
+ adap->algo = &i2c_dw_algo;
+ adap->dev.parent = &pdev->dev;
+
+ adap->nr = pdev->id;
+ r = i2c_add_numbered_adapter(adap);
+ if (r) {
+ dev_err(&pdev->dev, "failure adding adapter\n");
+ goto err_free_irq;
+ }
+
+ return 0;
+
+err_free_irq:
+ free_irq(dev->irq, dev);
+err_iounmap:
+ iounmap(dev->base);
+err_unuse_clocks:
+ clk_disable(dev->clk);
+ clk_put(dev->clk);
+ dev->clk = NULL;
+err_free_mem:
+ platform_set_drvdata(pdev, NULL);
+ put_device(&pdev->dev);
+ kfree(dev);
+err_release_region:
+ release_mem_region(mem->start, resource_size(mem));
+
+ return r;
+}
+
+static int __devexit dw_i2c_remove(struct platform_device *pdev)
+{
+ struct dw_i2c_dev *dev = platform_get_drvdata(pdev);
+ struct resource *mem;
+
+ platform_set_drvdata(pdev, NULL);
+ i2c_del_adapter(&dev->adapter);
+ put_device(&pdev->dev);
+
+ clk_disable(dev->clk);
+ clk_put(dev->clk);
+ dev->clk = NULL;
+
+ writeb(0, dev->base + DW_IC_ENABLE);
+ free_irq(dev->irq, dev);
+ kfree(dev);
+
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ release_mem_region(mem->start, resource_size(mem));
+ return 0;
+}
+
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:i2c_designware");
+
+static struct platform_driver dw_i2c_driver = {
+ .remove = __devexit_p(dw_i2c_remove),
+ .driver = {
+ .name = "i2c_designware",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init dw_i2c_init_driver(void)
+{
+ return platform_driver_probe(&dw_i2c_driver, dw_i2c_probe);
+}
+module_init(dw_i2c_init_driver);
+
+static void __exit dw_i2c_exit_driver(void)
+{
+ platform_driver_unregister(&dw_i2c_driver);
+}
+module_exit(dw_i2c_exit_driver);
+
+MODULE_AUTHOR("Baruch Siach <baruch@tkos.co.il>");
+MODULE_DESCRIPTION("Synopsys DesignWare I2C bus adapter");
+MODULE_LICENSE("GPL");
diff --git a/drivers/ide/cmd64x.c b/drivers/ide/cmd64x.c
index 03c8620..680e597 100644
--- a/drivers/ide/cmd64x.c
+++ b/drivers/ide/cmd64x.c
@@ -389,8 +389,7 @@
.init_chipset = init_chipset_cmd64x,
.enablebits = {{0x51,0x04,0x04}, {0x51,0x08,0x08}},
.port_ops = &cmd648_port_ops,
- .host_flags = IDE_HFLAG_SERIALIZE |
- IDE_HFLAG_ABUSE_PREFETCH,
+ .host_flags = IDE_HFLAG_ABUSE_PREFETCH,
.pio_mask = ATA_PIO5,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA2,
diff --git a/drivers/ide/cs5520.c b/drivers/ide/cs5520.c
index bd066bb..09f98ed 100644
--- a/drivers/ide/cs5520.c
+++ b/drivers/ide/cs5520.c
@@ -135,6 +135,7 @@
ide_pci_setup_ports(dev, d, &hw[0], &hws[0]);
hw[0].irq = 14;
+ hw[1].irq = 15;
return ide_host_add(d, hws, 2, NULL);
}
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index 4a19686..f0ede59 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -876,9 +876,12 @@
return stat;
/*
- * Sanity check the given block size
+ * Sanity check the given block size, in so far as making
+ * sure the sectors_per_frame we give to the caller won't
+ * end up being bogus.
*/
blocklen = be32_to_cpu(capbuf.blocklen);
+ blocklen = (blocklen >> SECTOR_BITS) << SECTOR_BITS;
switch (blocklen) {
case 512:
case 1024:
@@ -886,10 +889,9 @@
case 4096:
break;
default:
- printk(KERN_ERR PFX "%s: weird block size %u\n",
+ printk_once(KERN_ERR PFX "%s: weird block size %u; "
+ "setting default block size to 2048\n",
drive->name, blocklen);
- printk(KERN_ERR PFX "%s: default to 2kb block size\n",
- drive->name);
blocklen = 2048;
break;
}
diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c
index 219e6fb..ee58c88 100644
--- a/drivers/ide/ide-dma.c
+++ b/drivers/ide/ide-dma.c
@@ -361,9 +361,6 @@
if (__ide_dma_bad_drive(drive))
return 0;
- if (ide_id_dma_bug(drive))
- return 0;
-
if (hwif->host_flags & IDE_HFLAG_TRUST_BIOS_FOR_DMA)
return config_drive_for_dma(drive);
@@ -394,24 +391,6 @@
return -1;
}
-int ide_id_dma_bug(ide_drive_t *drive)
-{
- u16 *id = drive->id;
-
- if (id[ATA_ID_FIELD_VALID] & 4) {
- if ((id[ATA_ID_UDMA_MODES] >> 8) &&
- (id[ATA_ID_MWDMA_MODES] >> 8))
- goto err_out;
- } else if ((id[ATA_ID_MWDMA_MODES] >> 8) &&
- (id[ATA_ID_SWDMA_MODES] >> 8))
- goto err_out;
-
- return 0;
-err_out:
- printk(KERN_ERR "%s: bad DMA info in identify block\n", drive->name);
- return 1;
-}
-
int ide_set_dma(ide_drive_t *drive)
{
int rc;
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index 1059f80..93b7886 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -476,10 +476,14 @@
if (!ide_lock_port(hwif)) {
ide_hwif_t *prev_port;
-
- WARN_ON_ONCE(hwif->rq);
repeat:
prev_port = hwif->host->cur_port;
+
+ if (drive->dev_flags & IDE_DFLAG_BLOCKED)
+ rq = hwif->rq;
+ else
+ WARN_ON_ONCE(hwif->rq);
+
if (drive->dev_flags & IDE_DFLAG_SLEEPING &&
time_after(drive->sleep, jiffies)) {
ide_unlock_port(hwif);
@@ -506,43 +510,29 @@
hwif->cur_dev = drive;
drive->dev_flags &= ~(IDE_DFLAG_SLEEPING | IDE_DFLAG_PARKED);
- spin_unlock_irq(&hwif->lock);
- spin_lock_irq(q->queue_lock);
- /*
- * we know that the queue isn't empty, but this can happen
- * if the q->prep_rq_fn() decides to kill a request
- */
- if (!rq)
+ if (rq == NULL) {
+ spin_unlock_irq(&hwif->lock);
+ spin_lock_irq(q->queue_lock);
+ /*
+ * we know that the queue isn't empty, but this can
+ * happen if ->prep_rq_fn() decides to kill a request
+ */
rq = blk_fetch_request(drive->queue);
+ spin_unlock_irq(q->queue_lock);
+ spin_lock_irq(&hwif->lock);
- spin_unlock_irq(q->queue_lock);
- spin_lock_irq(&hwif->lock);
-
- if (!rq) {
- ide_unlock_port(hwif);
- goto out;
+ if (rq == NULL) {
+ ide_unlock_port(hwif);
+ goto out;
+ }
}
/*
* Sanity: don't accept a request that isn't a PM request
- * if we are currently power managed. This is very important as
- * blk_stop_queue() doesn't prevent the blk_fetch_request()
- * above to return us whatever is in the queue. Since we call
- * ide_do_request() ourselves, we end up taking requests while
- * the queue is blocked...
- *
- * We let requests forced at head of queue with ide-preempt
- * though. I hope that doesn't happen too much, hopefully not
- * unless the subdriver triggers such a thing in its own PM
- * state machine.
+ * if we are currently power managed.
*/
- if ((drive->dev_flags & IDE_DFLAG_BLOCKED) &&
- blk_pm_request(rq) == 0 &&
- (rq->cmd_flags & REQ_PREEMPT) == 0) {
- /* there should be no pending command at this point */
- ide_unlock_port(hwif);
- goto plug_device;
- }
+ BUG_ON((drive->dev_flags & IDE_DFLAG_BLOCKED) &&
+ blk_pm_request(rq) == 0);
hwif->rq = rq;
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index fa04715..2892b24 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -210,6 +210,7 @@
*/
static const struct drive_list_entry ivb_list[] = {
{ "QUANTUM FIREBALLlct10 05" , "A03.0900" },
+ { "QUANTUM FIREBALLlct20 30" , "APL.0900" },
{ "TSSTcorp CDDVDW SH-S202J" , "SB00" },
{ "TSSTcorp CDDVDW SH-S202J" , "SB01" },
{ "TSSTcorp CDDVDW SH-S202N" , "SB00" },
@@ -329,9 +330,6 @@
kfree(id);
- if ((drive->dev_flags & IDE_DFLAG_USING_DMA) && ide_id_dma_bug(drive))
- ide_dma_off(drive);
-
return 1;
out_err:
if (rc == 2)
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 51af4ee..1bb106f 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -818,6 +818,24 @@
return j;
}
+static void ide_host_enable_irqs(struct ide_host *host)
+{
+ ide_hwif_t *hwif;
+ int i;
+
+ ide_host_for_each_port(i, hwif, host) {
+ if (hwif == NULL)
+ continue;
+
+ /* clear any pending IRQs */
+ hwif->tp_ops->read_status(hwif);
+
+ /* unmask IRQs */
+ if (hwif->io_ports.ctl_addr)
+ hwif->tp_ops->write_devctl(hwif, ATA_DEVCTL_OBS);
+ }
+}
+
/*
* This routine sets up the IRQ for an IDE interface.
*/
@@ -831,9 +849,6 @@
if (irq_handler == NULL)
irq_handler = ide_intr;
- if (io_ports->ctl_addr)
- hwif->tp_ops->write_devctl(hwif, ATA_DEVCTL_OBS);
-
if (request_irq(hwif->irq, irq_handler, sa, hwif->name, hwif))
goto out_up;
@@ -1404,6 +1419,8 @@
ide_port_tune_devices(hwif);
}
+ ide_host_enable_irqs(host);
+
ide_host_for_each_port(i, hwif, host) {
if (hwif == NULL)
continue;
diff --git a/drivers/infiniband/core/addr.c b/drivers/infiniband/core/addr.c
index ce511d8..5be1bd4 100644
--- a/drivers/infiniband/core/addr.c
+++ b/drivers/infiniband/core/addr.c
@@ -514,7 +514,7 @@
.notifier_call = netevent_callback
};
-static int addr_init(void)
+static int __init addr_init(void)
{
addr_wq = create_singlethread_workqueue("ib_addr");
if (!addr_wq)
@@ -524,7 +524,7 @@
return 0;
}
-static void addr_cleanup(void)
+static void __exit addr_cleanup(void)
{
unregister_netevent_notifier(&nb);
destroy_workqueue(addr_wq);
diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c
index 851de83..0753178 100644
--- a/drivers/infiniband/core/cma.c
+++ b/drivers/infiniband/core/cma.c
@@ -2960,7 +2960,7 @@
kfree(cma_dev);
}
-static int cma_init(void)
+static int __init cma_init(void)
{
int ret, low, high, remaining;
@@ -2990,7 +2990,7 @@
return ret;
}
-static void cma_cleanup(void)
+static void __exit cma_cleanup(void)
{
ib_unregister_client(&cma_client);
unregister_netdevice_notifier(&cma_nb);
diff --git a/drivers/infiniband/hw/ehca/ehca_hca.c b/drivers/infiniband/hw/ehca/ehca_hca.c
index 9209c53..8b92f85 100644
--- a/drivers/infiniband/hw/ehca/ehca_hca.c
+++ b/drivers/infiniband/hw/ehca/ehca_hca.c
@@ -319,7 +319,7 @@
ib_device);
struct hipz_query_port *rblock;
- if (index > 255) {
+ if (index < 0 || index > 255) {
ehca_err(&shca->ib_device, "Invalid index: %x.", index);
return -EINVAL;
}
diff --git a/drivers/infiniband/hw/ehca/ehca_main.c b/drivers/infiniband/hw/ehca/ehca_main.c
index ce4e6ef..fab18a2 100644
--- a/drivers/infiniband/hw/ehca/ehca_main.c
+++ b/drivers/infiniband/hw/ehca/ehca_main.c
@@ -52,7 +52,7 @@
#include "ehca_tools.h"
#include "hcp_if.h"
-#define HCAD_VERSION "0027"
+#define HCAD_VERSION "0028"
MODULE_LICENSE("Dual BSD/GPL");
MODULE_AUTHOR("Christoph Raisch <raisch@de.ibm.com>");
@@ -506,6 +506,7 @@
shca->ib_device.detach_mcast = ehca_detach_mcast;
shca->ib_device.process_mad = ehca_process_mad;
shca->ib_device.mmap = ehca_mmap;
+ shca->ib_device.dma_ops = &ehca_dma_mapping_ops;
if (EHCA_BMASK_GET(HCA_CAP_SRQ, shca->hca_cap)) {
shca->ib_device.uverbs_cmd_mask |=
@@ -1028,17 +1029,23 @@
goto module_init1;
}
+ ret = ehca_create_busmap();
+ if (ret) {
+ ehca_gen_err("Cannot create busmap.");
+ goto module_init2;
+ }
+
ret = ibmebus_register_driver(&ehca_driver);
if (ret) {
ehca_gen_err("Cannot register eHCA device driver");
ret = -EINVAL;
- goto module_init2;
+ goto module_init3;
}
ret = register_memory_notifier(&ehca_mem_nb);
if (ret) {
ehca_gen_err("Failed registering memory add/remove notifier");
- goto module_init3;
+ goto module_init4;
}
if (ehca_poll_all_eqs != 1) {
@@ -1053,9 +1060,12 @@
return 0;
-module_init3:
+module_init4:
ibmebus_unregister_driver(&ehca_driver);
+module_init3:
+ ehca_destroy_busmap();
+
module_init2:
ehca_destroy_slab_caches();
@@ -1073,6 +1083,8 @@
unregister_memory_notifier(&ehca_mem_nb);
+ ehca_destroy_busmap();
+
ehca_destroy_slab_caches();
ehca_destroy_comp_pool();
diff --git a/drivers/infiniband/hw/ehca/ehca_mrmw.c b/drivers/infiniband/hw/ehca/ehca_mrmw.c
index 72f83f7..7663a2a 100644
--- a/drivers/infiniband/hw/ehca/ehca_mrmw.c
+++ b/drivers/infiniband/hw/ehca/ehca_mrmw.c
@@ -53,6 +53,38 @@
/* max number of rpages (per hcall register_rpages) */
#define MAX_RPAGES 512
+/* DMEM toleration management */
+#define EHCA_SECTSHIFT SECTION_SIZE_BITS
+#define EHCA_SECTSIZE (1UL << EHCA_SECTSHIFT)
+#define EHCA_HUGEPAGESHIFT 34
+#define EHCA_HUGEPAGE_SIZE (1UL << EHCA_HUGEPAGESHIFT)
+#define EHCA_HUGEPAGE_PFN_MASK ((EHCA_HUGEPAGE_SIZE - 1) >> PAGE_SHIFT)
+#define EHCA_INVAL_ADDR 0xFFFFFFFFFFFFFFFFULL
+#define EHCA_DIR_INDEX_SHIFT 13 /* 8k Entries in 64k block */
+#define EHCA_TOP_INDEX_SHIFT (EHCA_DIR_INDEX_SHIFT * 2)
+#define EHCA_MAP_ENTRIES (1 << EHCA_DIR_INDEX_SHIFT)
+#define EHCA_TOP_MAP_SIZE (0x10000) /* currently fixed map size */
+#define EHCA_DIR_MAP_SIZE (0x10000)
+#define EHCA_ENT_MAP_SIZE (0x10000)
+#define EHCA_INDEX_MASK (EHCA_MAP_ENTRIES - 1)
+
+static unsigned long ehca_mr_len;
+
+/*
+ * Memory map data structures
+ */
+struct ehca_dir_bmap {
+ u64 ent[EHCA_MAP_ENTRIES];
+};
+struct ehca_top_bmap {
+ struct ehca_dir_bmap *dir[EHCA_MAP_ENTRIES];
+};
+struct ehca_bmap {
+ struct ehca_top_bmap *top[EHCA_MAP_ENTRIES];
+};
+
+static struct ehca_bmap *ehca_bmap;
+
static struct kmem_cache *mr_cache;
static struct kmem_cache *mw_cache;
@@ -68,6 +100,8 @@
#define EHCA_MR_PGSHIFT1M 20
#define EHCA_MR_PGSHIFT16M 24
+static u64 ehca_map_vaddr(void *caddr);
+
static u32 ehca_encode_hwpage_size(u32 pgsize)
{
int log = ilog2(pgsize);
@@ -135,7 +169,8 @@
goto get_dma_mr_exit0;
}
- ret = ehca_reg_maxmr(shca, e_maxmr, (u64 *)KERNELBASE,
+ ret = ehca_reg_maxmr(shca, e_maxmr,
+ (void *)ehca_map_vaddr((void *)KERNELBASE),
mr_access_flags, e_pd,
&e_maxmr->ib.ib_mr.lkey,
&e_maxmr->ib.ib_mr.rkey);
@@ -251,7 +286,7 @@
ret = ehca_reg_mr(shca, e_mr, iova_start, size, mr_access_flags,
e_pd, &pginfo, &e_mr->ib.ib_mr.lkey,
- &e_mr->ib.ib_mr.rkey);
+ &e_mr->ib.ib_mr.rkey, EHCA_REG_MR);
if (ret) {
ib_mr = ERR_PTR(ret);
goto reg_phys_mr_exit1;
@@ -370,7 +405,7 @@
ret = ehca_reg_mr(shca, e_mr, (u64 *)virt, length, mr_access_flags,
e_pd, &pginfo, &e_mr->ib.ib_mr.lkey,
- &e_mr->ib.ib_mr.rkey);
+ &e_mr->ib.ib_mr.rkey, EHCA_REG_MR);
if (ret == -EINVAL && pginfo.hwpage_size > PAGE_SIZE) {
ehca_warn(pd->device, "failed to register mr "
"with hwpage_size=%llx", hwpage_size);
@@ -794,7 +829,7 @@
ret = ehca_reg_mr(shca, e_fmr, NULL,
fmr_attr->max_pages * (1 << fmr_attr->page_shift),
mr_access_flags, e_pd, &pginfo,
- &tmp_lkey, &tmp_rkey);
+ &tmp_lkey, &tmp_rkey, EHCA_REG_MR);
if (ret) {
ib_fmr = ERR_PTR(ret);
goto alloc_fmr_exit1;
@@ -983,6 +1018,10 @@
/*----------------------------------------------------------------------*/
+static int ehca_reg_bmap_mr_rpages(struct ehca_shca *shca,
+ struct ehca_mr *e_mr,
+ struct ehca_mr_pginfo *pginfo);
+
int ehca_reg_mr(struct ehca_shca *shca,
struct ehca_mr *e_mr,
u64 *iova_start,
@@ -991,7 +1030,8 @@
struct ehca_pd *e_pd,
struct ehca_mr_pginfo *pginfo,
u32 *lkey, /*OUT*/
- u32 *rkey) /*OUT*/
+ u32 *rkey, /*OUT*/
+ enum ehca_reg_type reg_type)
{
int ret;
u64 h_ret;
@@ -1015,7 +1055,13 @@
e_mr->ipz_mr_handle = hipzout.handle;
- ret = ehca_reg_mr_rpages(shca, e_mr, pginfo);
+ if (reg_type == EHCA_REG_BUSMAP_MR)
+ ret = ehca_reg_bmap_mr_rpages(shca, e_mr, pginfo);
+ else if (reg_type == EHCA_REG_MR)
+ ret = ehca_reg_mr_rpages(shca, e_mr, pginfo);
+ else
+ ret = -EINVAL;
+
if (ret)
goto ehca_reg_mr_exit1;
@@ -1316,7 +1362,7 @@
e_mr->fmr_map_cnt = save_mr.fmr_map_cnt;
ret = ehca_reg_mr(shca, e_mr, iova_start, size, acl,
- e_pd, pginfo, lkey, rkey);
+ e_pd, pginfo, lkey, rkey, EHCA_REG_MR);
if (ret) {
u32 offset = (u64)(&e_mr->flags) - (u64)e_mr;
memcpy(&e_mr->flags, &(save_mr.flags),
@@ -1409,7 +1455,7 @@
ret = ehca_reg_mr(shca, e_fmr, NULL,
(e_fmr->fmr_max_pages * e_fmr->fmr_page_size),
e_fmr->acl, e_pd, &pginfo, &tmp_lkey,
- &tmp_rkey);
+ &tmp_rkey, EHCA_REG_MR);
if (ret) {
u32 offset = (u64)(&e_fmr->flags) - (u64)e_fmr;
memcpy(&e_fmr->flags, &(save_mr.flags),
@@ -1478,6 +1524,90 @@
} /* end ehca_reg_smr() */
/*----------------------------------------------------------------------*/
+static inline void *ehca_calc_sectbase(int top, int dir, int idx)
+{
+ unsigned long ret = idx;
+ ret |= dir << EHCA_DIR_INDEX_SHIFT;
+ ret |= top << EHCA_TOP_INDEX_SHIFT;
+ return abs_to_virt(ret << SECTION_SIZE_BITS);
+}
+
+#define ehca_bmap_valid(entry) \
+ ((u64)entry != (u64)EHCA_INVAL_ADDR)
+
+static u64 ehca_reg_mr_section(int top, int dir, int idx, u64 *kpage,
+ struct ehca_shca *shca, struct ehca_mr *mr,
+ struct ehca_mr_pginfo *pginfo)
+{
+ u64 h_ret = 0;
+ unsigned long page = 0;
+ u64 rpage = virt_to_abs(kpage);
+ int page_count;
+
+ void *sectbase = ehca_calc_sectbase(top, dir, idx);
+ if ((unsigned long)sectbase & (pginfo->hwpage_size - 1)) {
+ ehca_err(&shca->ib_device, "reg_mr_section will probably fail:"
+ "hwpage_size does not fit to "
+ "section start address");
+ }
+ page_count = EHCA_SECTSIZE / pginfo->hwpage_size;
+
+ while (page < page_count) {
+ u64 rnum;
+ for (rnum = 0; (rnum < MAX_RPAGES) && (page < page_count);
+ rnum++) {
+ void *pg = sectbase + ((page++) * pginfo->hwpage_size);
+ kpage[rnum] = virt_to_abs(pg);
+ }
+
+ h_ret = hipz_h_register_rpage_mr(shca->ipz_hca_handle, mr,
+ ehca_encode_hwpage_size(pginfo->hwpage_size),
+ 0, rpage, rnum);
+
+ if ((h_ret != H_SUCCESS) && (h_ret != H_PAGE_REGISTERED)) {
+ ehca_err(&shca->ib_device, "register_rpage_mr failed");
+ return h_ret;
+ }
+ }
+ return h_ret;
+}
+
+static u64 ehca_reg_mr_sections(int top, int dir, u64 *kpage,
+ struct ehca_shca *shca, struct ehca_mr *mr,
+ struct ehca_mr_pginfo *pginfo)
+{
+ u64 hret = H_SUCCESS;
+ int idx;
+
+ for (idx = 0; idx < EHCA_MAP_ENTRIES; idx++) {
+ if (!ehca_bmap_valid(ehca_bmap->top[top]->dir[dir]->ent[idx]))
+ continue;
+
+ hret = ehca_reg_mr_section(top, dir, idx, kpage, shca, mr,
+ pginfo);
+ if ((hret != H_SUCCESS) && (hret != H_PAGE_REGISTERED))
+ return hret;
+ }
+ return hret;
+}
+
+static u64 ehca_reg_mr_dir_sections(int top, u64 *kpage, struct ehca_shca *shca,
+ struct ehca_mr *mr,
+ struct ehca_mr_pginfo *pginfo)
+{
+ u64 hret = H_SUCCESS;
+ int dir;
+
+ for (dir = 0; dir < EHCA_MAP_ENTRIES; dir++) {
+ if (!ehca_bmap_valid(ehca_bmap->top[top]->dir[dir]))
+ continue;
+
+ hret = ehca_reg_mr_sections(top, dir, kpage, shca, mr, pginfo);
+ if ((hret != H_SUCCESS) && (hret != H_PAGE_REGISTERED))
+ return hret;
+ }
+ return hret;
+}
/* register internal max-MR to internal SHCA */
int ehca_reg_internal_maxmr(
@@ -1495,6 +1625,11 @@
u32 num_hwpages;
u64 hw_pgsize;
+ if (!ehca_bmap) {
+ ret = -EFAULT;
+ goto ehca_reg_internal_maxmr_exit0;
+ }
+
e_mr = ehca_mr_new();
if (!e_mr) {
ehca_err(&shca->ib_device, "out of memory");
@@ -1504,8 +1639,8 @@
e_mr->flags |= EHCA_MR_FLAG_MAXMR;
/* register internal max-MR on HCA */
- size_maxmr = (u64)high_memory - PAGE_OFFSET;
- iova_start = (u64 *)KERNELBASE;
+ size_maxmr = ehca_mr_len;
+ iova_start = (u64 *)ehca_map_vaddr((void *)KERNELBASE);
ib_pbuf.addr = 0;
ib_pbuf.size = size_maxmr;
num_kpages = NUM_CHUNKS(((u64)iova_start % PAGE_SIZE) + size_maxmr,
@@ -1524,7 +1659,7 @@
ret = ehca_reg_mr(shca, e_mr, iova_start, size_maxmr, 0, e_pd,
&pginfo, &e_mr->ib.ib_mr.lkey,
- &e_mr->ib.ib_mr.rkey);
+ &e_mr->ib.ib_mr.rkey, EHCA_REG_BUSMAP_MR);
if (ret) {
ehca_err(&shca->ib_device, "reg of internal max MR failed, "
"e_mr=%p iova_start=%p size_maxmr=%llx num_kpages=%x "
@@ -2077,8 +2212,8 @@
u64 *iova_start)
{
/* a MR is treated as max-MR only if it fits following: */
- if ((size == ((u64)high_memory - PAGE_OFFSET)) &&
- (iova_start == (void *)KERNELBASE)) {
+ if ((size == ehca_mr_len) &&
+ (iova_start == (void *)ehca_map_vaddr((void *)KERNELBASE))) {
ehca_gen_dbg("this is a max-MR");
return 1;
} else
@@ -2184,3 +2319,350 @@
if (mw_cache)
kmem_cache_destroy(mw_cache);
}
+
+static inline int ehca_init_top_bmap(struct ehca_top_bmap *ehca_top_bmap,
+ int dir)
+{
+ if (!ehca_bmap_valid(ehca_top_bmap->dir[dir])) {
+ ehca_top_bmap->dir[dir] =
+ kmalloc(sizeof(struct ehca_dir_bmap), GFP_KERNEL);
+ if (!ehca_top_bmap->dir[dir])
+ return -ENOMEM;
+ /* Set map block to 0xFF according to EHCA_INVAL_ADDR */
+ memset(ehca_top_bmap->dir[dir], 0xFF, EHCA_ENT_MAP_SIZE);
+ }
+ return 0;
+}
+
+static inline int ehca_init_bmap(struct ehca_bmap *ehca_bmap, int top, int dir)
+{
+ if (!ehca_bmap_valid(ehca_bmap->top[top])) {
+ ehca_bmap->top[top] =
+ kmalloc(sizeof(struct ehca_top_bmap), GFP_KERNEL);
+ if (!ehca_bmap->top[top])
+ return -ENOMEM;
+ /* Set map block to 0xFF according to EHCA_INVAL_ADDR */
+ memset(ehca_bmap->top[top], 0xFF, EHCA_DIR_MAP_SIZE);
+ }
+ return ehca_init_top_bmap(ehca_bmap->top[top], dir);
+}
+
+static inline int ehca_calc_index(unsigned long i, unsigned long s)
+{
+ return (i >> s) & EHCA_INDEX_MASK;
+}
+
+void ehca_destroy_busmap(void)
+{
+ int top, dir;
+
+ if (!ehca_bmap)
+ return;
+
+ for (top = 0; top < EHCA_MAP_ENTRIES; top++) {
+ if (!ehca_bmap_valid(ehca_bmap->top[top]))
+ continue;
+ for (dir = 0; dir < EHCA_MAP_ENTRIES; dir++) {
+ if (!ehca_bmap_valid(ehca_bmap->top[top]->dir[dir]))
+ continue;
+
+ kfree(ehca_bmap->top[top]->dir[dir]);
+ }
+
+ kfree(ehca_bmap->top[top]);
+ }
+
+ kfree(ehca_bmap);
+ ehca_bmap = NULL;
+}
+
+static int ehca_update_busmap(unsigned long pfn, unsigned long nr_pages)
+{
+ unsigned long i, start_section, end_section;
+ int top, dir, idx;
+
+ if (!nr_pages)
+ return 0;
+
+ if (!ehca_bmap) {
+ ehca_bmap = kmalloc(sizeof(struct ehca_bmap), GFP_KERNEL);
+ if (!ehca_bmap)
+ return -ENOMEM;
+ /* Set map block to 0xFF according to EHCA_INVAL_ADDR */
+ memset(ehca_bmap, 0xFF, EHCA_TOP_MAP_SIZE);
+ }
+
+ start_section = phys_to_abs(pfn * PAGE_SIZE) / EHCA_SECTSIZE;
+ end_section = phys_to_abs((pfn + nr_pages) * PAGE_SIZE) / EHCA_SECTSIZE;
+ for (i = start_section; i < end_section; i++) {
+ int ret;
+ top = ehca_calc_index(i, EHCA_TOP_INDEX_SHIFT);
+ dir = ehca_calc_index(i, EHCA_DIR_INDEX_SHIFT);
+ idx = i & EHCA_INDEX_MASK;
+
+ ret = ehca_init_bmap(ehca_bmap, top, dir);
+ if (ret) {
+ ehca_destroy_busmap();
+ return ret;
+ }
+ ehca_bmap->top[top]->dir[dir]->ent[idx] = ehca_mr_len;
+ ehca_mr_len += EHCA_SECTSIZE;
+ }
+ return 0;
+}
+
+static int ehca_is_hugepage(unsigned long pfn)
+{
+ int page_order;
+
+ if (pfn & EHCA_HUGEPAGE_PFN_MASK)
+ return 0;
+
+ page_order = compound_order(pfn_to_page(pfn));
+ if (page_order + PAGE_SHIFT != EHCA_HUGEPAGESHIFT)
+ return 0;
+
+ return 1;
+}
+
+static int ehca_create_busmap_callback(unsigned long initial_pfn,
+ unsigned long total_nr_pages, void *arg)
+{
+ int ret;
+ unsigned long pfn, start_pfn, end_pfn, nr_pages;
+
+ if ((total_nr_pages * PAGE_SIZE) < EHCA_HUGEPAGE_SIZE)
+ return ehca_update_busmap(initial_pfn, total_nr_pages);
+
+ /* Given chunk is >= 16GB -> check for hugepages */
+ start_pfn = initial_pfn;
+ end_pfn = initial_pfn + total_nr_pages;
+ pfn = start_pfn;
+
+ while (pfn < end_pfn) {
+ if (ehca_is_hugepage(pfn)) {
+ /* Add mem found in front of the hugepage */
+ nr_pages = pfn - start_pfn;
+ ret = ehca_update_busmap(start_pfn, nr_pages);
+ if (ret)
+ return ret;
+ /* Skip the hugepage */
+ pfn += (EHCA_HUGEPAGE_SIZE / PAGE_SIZE);
+ start_pfn = pfn;
+ } else
+ pfn += (EHCA_SECTSIZE / PAGE_SIZE);
+ }
+
+ /* Add mem found behind the hugepage(s) */
+ nr_pages = pfn - start_pfn;
+ return ehca_update_busmap(start_pfn, nr_pages);
+}
+
+int ehca_create_busmap(void)
+{
+ int ret;
+
+ ehca_mr_len = 0;
+ ret = walk_memory_resource(0, 1ULL << MAX_PHYSMEM_BITS, NULL,
+ ehca_create_busmap_callback);
+ return ret;
+}
+
+static int ehca_reg_bmap_mr_rpages(struct ehca_shca *shca,
+ struct ehca_mr *e_mr,
+ struct ehca_mr_pginfo *pginfo)
+{
+ int top;
+ u64 hret, *kpage;
+
+ kpage = ehca_alloc_fw_ctrlblock(GFP_KERNEL);
+ if (!kpage) {
+ ehca_err(&shca->ib_device, "kpage alloc failed");
+ return -ENOMEM;
+ }
+ for (top = 0; top < EHCA_MAP_ENTRIES; top++) {
+ if (!ehca_bmap_valid(ehca_bmap->top[top]))
+ continue;
+ hret = ehca_reg_mr_dir_sections(top, kpage, shca, e_mr, pginfo);
+ if ((hret != H_PAGE_REGISTERED) && (hret != H_SUCCESS))
+ break;
+ }
+
+ ehca_free_fw_ctrlblock(kpage);
+
+ if (hret == H_SUCCESS)
+ return 0; /* Everything is fine */
+ else {
+ ehca_err(&shca->ib_device, "ehca_reg_bmap_mr_rpages failed, "
+ "h_ret=%lli e_mr=%p top=%x lkey=%x "
+ "hca_hndl=%llx mr_hndl=%llx", hret, e_mr, top,
+ e_mr->ib.ib_mr.lkey,
+ shca->ipz_hca_handle.handle,
+ e_mr->ipz_mr_handle.handle);
+ return ehca2ib_return_code(hret);
+ }
+}
+
+static u64 ehca_map_vaddr(void *caddr)
+{
+ int top, dir, idx;
+ unsigned long abs_addr, offset;
+ u64 entry;
+
+ if (!ehca_bmap)
+ return EHCA_INVAL_ADDR;
+
+ abs_addr = virt_to_abs(caddr);
+ top = ehca_calc_index(abs_addr, EHCA_TOP_INDEX_SHIFT + EHCA_SECTSHIFT);
+ if (!ehca_bmap_valid(ehca_bmap->top[top]))
+ return EHCA_INVAL_ADDR;
+
+ dir = ehca_calc_index(abs_addr, EHCA_DIR_INDEX_SHIFT + EHCA_SECTSHIFT);
+ if (!ehca_bmap_valid(ehca_bmap->top[top]->dir[dir]))
+ return EHCA_INVAL_ADDR;
+
+ idx = ehca_calc_index(abs_addr, EHCA_SECTSHIFT);
+
+ entry = ehca_bmap->top[top]->dir[dir]->ent[idx];
+ if (ehca_bmap_valid(entry)) {
+ offset = (unsigned long)caddr & (EHCA_SECTSIZE - 1);
+ return entry | offset;
+ } else
+ return EHCA_INVAL_ADDR;
+}
+
+static int ehca_dma_mapping_error(struct ib_device *dev, u64 dma_addr)
+{
+ return dma_addr == EHCA_INVAL_ADDR;
+}
+
+static u64 ehca_dma_map_single(struct ib_device *dev, void *cpu_addr,
+ size_t size, enum dma_data_direction direction)
+{
+ if (cpu_addr)
+ return ehca_map_vaddr(cpu_addr);
+ else
+ return EHCA_INVAL_ADDR;
+}
+
+static void ehca_dma_unmap_single(struct ib_device *dev, u64 addr, size_t size,
+ enum dma_data_direction direction)
+{
+ /* This is only a stub; nothing to be done here */
+}
+
+static u64 ehca_dma_map_page(struct ib_device *dev, struct page *page,
+ unsigned long offset, size_t size,
+ enum dma_data_direction direction)
+{
+ u64 addr;
+
+ if (offset + size > PAGE_SIZE)
+ return EHCA_INVAL_ADDR;
+
+ addr = ehca_map_vaddr(page_address(page));
+ if (!ehca_dma_mapping_error(dev, addr))
+ addr += offset;
+
+ return addr;
+}
+
+static void ehca_dma_unmap_page(struct ib_device *dev, u64 addr, size_t size,
+ enum dma_data_direction direction)
+{
+ /* This is only a stub; nothing to be done here */
+}
+
+static int ehca_dma_map_sg(struct ib_device *dev, struct scatterlist *sgl,
+ int nents, enum dma_data_direction direction)
+{
+ struct scatterlist *sg;
+ int i;
+
+ for_each_sg(sgl, sg, nents, i) {
+ u64 addr;
+ addr = ehca_map_vaddr(sg_virt(sg));
+ if (ehca_dma_mapping_error(dev, addr))
+ return 0;
+
+ sg->dma_address = addr;
+ sg->dma_length = sg->length;
+ }
+ return nents;
+}
+
+static void ehca_dma_unmap_sg(struct ib_device *dev, struct scatterlist *sg,
+ int nents, enum dma_data_direction direction)
+{
+ /* This is only a stub; nothing to be done here */
+}
+
+static u64 ehca_dma_address(struct ib_device *dev, struct scatterlist *sg)
+{
+ return sg->dma_address;
+}
+
+static unsigned int ehca_dma_len(struct ib_device *dev, struct scatterlist *sg)
+{
+ return sg->length;
+}
+
+static void ehca_dma_sync_single_for_cpu(struct ib_device *dev, u64 addr,
+ size_t size,
+ enum dma_data_direction dir)
+{
+ dma_sync_single_for_cpu(dev->dma_device, addr, size, dir);
+}
+
+static void ehca_dma_sync_single_for_device(struct ib_device *dev, u64 addr,
+ size_t size,
+ enum dma_data_direction dir)
+{
+ dma_sync_single_for_device(dev->dma_device, addr, size, dir);
+}
+
+static void *ehca_dma_alloc_coherent(struct ib_device *dev, size_t size,
+ u64 *dma_handle, gfp_t flag)
+{
+ struct page *p;
+ void *addr = NULL;
+ u64 dma_addr;
+
+ p = alloc_pages(flag, get_order(size));
+ if (p) {
+ addr = page_address(p);
+ dma_addr = ehca_map_vaddr(addr);
+ if (ehca_dma_mapping_error(dev, dma_addr)) {
+ free_pages((unsigned long)addr, get_order(size));
+ return NULL;
+ }
+ if (dma_handle)
+ *dma_handle = dma_addr;
+ return addr;
+ }
+ return NULL;
+}
+
+static void ehca_dma_free_coherent(struct ib_device *dev, size_t size,
+ void *cpu_addr, u64 dma_handle)
+{
+ if (cpu_addr && size)
+ free_pages((unsigned long)cpu_addr, get_order(size));
+}
+
+
+struct ib_dma_mapping_ops ehca_dma_mapping_ops = {
+ .mapping_error = ehca_dma_mapping_error,
+ .map_single = ehca_dma_map_single,
+ .unmap_single = ehca_dma_unmap_single,
+ .map_page = ehca_dma_map_page,
+ .unmap_page = ehca_dma_unmap_page,
+ .map_sg = ehca_dma_map_sg,
+ .unmap_sg = ehca_dma_unmap_sg,
+ .dma_address = ehca_dma_address,
+ .dma_len = ehca_dma_len,
+ .sync_single_for_cpu = ehca_dma_sync_single_for_cpu,
+ .sync_single_for_device = ehca_dma_sync_single_for_device,
+ .alloc_coherent = ehca_dma_alloc_coherent,
+ .free_coherent = ehca_dma_free_coherent,
+};
diff --git a/drivers/infiniband/hw/ehca/ehca_mrmw.h b/drivers/infiniband/hw/ehca/ehca_mrmw.h
index bc8f4e3..50d8b51 100644
--- a/drivers/infiniband/hw/ehca/ehca_mrmw.h
+++ b/drivers/infiniband/hw/ehca/ehca_mrmw.h
@@ -42,6 +42,11 @@
#ifndef _EHCA_MRMW_H_
#define _EHCA_MRMW_H_
+enum ehca_reg_type {
+ EHCA_REG_MR,
+ EHCA_REG_BUSMAP_MR
+};
+
int ehca_reg_mr(struct ehca_shca *shca,
struct ehca_mr *e_mr,
u64 *iova_start,
@@ -50,7 +55,8 @@
struct ehca_pd *e_pd,
struct ehca_mr_pginfo *pginfo,
u32 *lkey,
- u32 *rkey);
+ u32 *rkey,
+ enum ehca_reg_type reg_type);
int ehca_reg_mr_rpages(struct ehca_shca *shca,
struct ehca_mr *e_mr,
@@ -118,4 +124,9 @@
void ehca_mr_deletenew(struct ehca_mr *mr);
+int ehca_create_busmap(void);
+
+void ehca_destroy_busmap(void);
+
+extern struct ib_dma_mapping_ops ehca_dma_mapping_ops;
#endif /*_EHCA_MRMW_H_*/
diff --git a/drivers/infiniband/hw/mthca/mthca_mr.c b/drivers/infiniband/hw/mthca/mthca_mr.c
index d606edf..065b208 100644
--- a/drivers/infiniband/hw/mthca/mthca_mr.c
+++ b/drivers/infiniband/hw/mthca/mthca_mr.c
@@ -352,10 +352,14 @@
BUG_ON(!mtts);
+ dma_sync_single_for_cpu(&dev->pdev->dev, dma_handle,
+ list_len * sizeof (u64), DMA_TO_DEVICE);
+
for (i = 0; i < list_len; ++i)
mtts[i] = cpu_to_be64(buffer_list[i] | MTHCA_MTT_FLAG_PRESENT);
- dma_sync_single(&dev->pdev->dev, dma_handle, list_len * sizeof (u64), DMA_TO_DEVICE);
+ dma_sync_single_for_device(&dev->pdev->dev, dma_handle,
+ list_len * sizeof (u64), DMA_TO_DEVICE);
}
int mthca_write_mtt(struct mthca_dev *dev, struct mthca_mtt *mtt,
@@ -803,12 +807,15 @@
wmb();
+ dma_sync_single_for_cpu(&dev->pdev->dev, fmr->mem.arbel.dma_handle,
+ list_len * sizeof(u64), DMA_TO_DEVICE);
+
for (i = 0; i < list_len; ++i)
fmr->mem.arbel.mtts[i] = cpu_to_be64(page_list[i] |
MTHCA_MTT_FLAG_PRESENT);
- dma_sync_single(&dev->pdev->dev, fmr->mem.arbel.dma_handle,
- list_len * sizeof(u64), DMA_TO_DEVICE);
+ dma_sync_single_for_device(&dev->pdev->dev, fmr->mem.arbel.dma_handle,
+ list_len * sizeof(u64), DMA_TO_DEVICE);
fmr->mem.arbel.mpt->key = cpu_to_be32(key);
fmr->mem.arbel.mpt->lkey = cpu_to_be32(key);
diff --git a/drivers/infiniband/hw/nes/nes_cm.c b/drivers/infiniband/hw/nes/nes_cm.c
index 11c7d664..114b802 100644
--- a/drivers/infiniband/hw/nes/nes_cm.c
+++ b/drivers/infiniband/hw/nes/nes_cm.c
@@ -472,6 +472,7 @@
static void nes_retrans_expired(struct nes_cm_node *cm_node)
{
+ struct iw_cm_id *cm_id = cm_node->cm_id;
switch (cm_node->state) {
case NES_CM_STATE_SYN_RCVD:
case NES_CM_STATE_CLOSING:
@@ -479,7 +480,9 @@
break;
case NES_CM_STATE_LAST_ACK:
case NES_CM_STATE_FIN_WAIT1:
- case NES_CM_STATE_MPAREJ_RCVD:
+ if (cm_node->cm_id)
+ cm_id->rem_ref(cm_id);
+ cm_node->state = NES_CM_STATE_CLOSED;
send_reset(cm_node, NULL);
break;
default:
@@ -1406,6 +1409,7 @@
case NES_CM_STATE_CLOSED:
drop_packet(skb);
break;
+ case NES_CM_STATE_FIN_WAIT1:
case NES_CM_STATE_LAST_ACK:
cm_node->cm_id->rem_ref(cm_node->cm_id);
case NES_CM_STATE_TIME_WAIT:
@@ -1413,8 +1417,6 @@
rem_ref_cm_node(cm_node->cm_core, cm_node);
drop_packet(skb);
break;
- case NES_CM_STATE_FIN_WAIT1:
- nes_debug(NES_DBG_CM, "Bad state %s[%u]\n", __func__, __LINE__);
default:
drop_packet(skb);
break;
diff --git a/drivers/infiniband/hw/nes/nes_verbs.c b/drivers/infiniband/hw/nes/nes_verbs.c
index 64d5cfd..21e0fd3 100644
--- a/drivers/infiniband/hw/nes/nes_verbs.c
+++ b/drivers/infiniband/hw/nes/nes_verbs.c
@@ -654,7 +654,7 @@
default:
props->max_qp_rd_atom = 0;
}
- props->max_qp_init_rd_atom = props->max_qp_wr;
+ props->max_qp_init_rd_atom = props->max_qp_rd_atom;
props->atomic_cap = IB_ATOMIC_NONE;
props->max_map_per_fmr = 1;
diff --git a/drivers/macintosh/macio_asic.c b/drivers/macintosh/macio_asic.c
index 6e149f4..a0f6838 100644
--- a/drivers/macintosh/macio_asic.c
+++ b/drivers/macintosh/macio_asic.c
@@ -378,6 +378,17 @@
dev->ofdev.dev.bus = &macio_bus_type;
dev->ofdev.dev.release = macio_release_dev;
+#ifdef CONFIG_PCI
+ /* Set the DMA ops to the ones from the PCI device, this could be
+ * fishy if we didn't know that on PowerMac it's always direct ops
+ * or iommu ops that will work fine
+ */
+ dev->ofdev.dev.archdata.dma_ops =
+ chip->lbus.pdev->dev.archdata.dma_ops;
+ dev->ofdev.dev.archdata.dma_data =
+ chip->lbus.pdev->dev.archdata.dma_data;
+#endif /* CONFIG_PCI */
+
#ifdef DEBUG
printk("preparing mdev @%p, ofdev @%p, dev @%p, kobj @%p\n",
dev, &dev->ofdev, &dev->ofdev.dev, &dev->ofdev.dev.kobj);
diff --git a/drivers/md/Kconfig b/drivers/md/Kconfig
index 36e0675..020f957 100644
--- a/drivers/md/Kconfig
+++ b/drivers/md/Kconfig
@@ -231,6 +231,17 @@
Allow volume managers to mirror logical volumes, also
needed for live data migration tools such as 'pvmove'.
+config DM_LOG_USERSPACE
+ tristate "Mirror userspace logging (EXPERIMENTAL)"
+ depends on DM_MIRROR && EXPERIMENTAL && NET
+ select CONNECTOR
+ ---help---
+ The userspace logging module provides a mechanism for
+ relaying the dm-dirty-log API to userspace. Log designs
+ which are more suited to userspace implementation (e.g.
+ shared storage logs) or experimental logs can be implemented
+ by leveraging this framework.
+
config DM_ZERO
tristate "Zero target"
depends on BLK_DEV_DM
@@ -249,6 +260,25 @@
---help---
Allow volume managers to support multipath hardware.
+config DM_MULTIPATH_QL
+ tristate "I/O Path Selector based on the number of in-flight I/Os"
+ depends on DM_MULTIPATH
+ ---help---
+ This path selector is a dynamic load balancer which selects
+ the path with the least number of in-flight I/Os.
+
+ If unsure, say N.
+
+config DM_MULTIPATH_ST
+ tristate "I/O Path Selector based on the service time"
+ depends on DM_MULTIPATH
+ ---help---
+ This path selector is a dynamic load balancer which selects
+ the path expected to complete the incoming I/O in the shortest
+ time.
+
+ If unsure, say N.
+
config DM_DELAY
tristate "I/O delaying target (EXPERIMENTAL)"
depends on BLK_DEV_DM && EXPERIMENTAL
diff --git a/drivers/md/Makefile b/drivers/md/Makefile
index 45cc595..1dc4185 100644
--- a/drivers/md/Makefile
+++ b/drivers/md/Makefile
@@ -8,6 +8,8 @@
dm-snapshot-y += dm-snap.o dm-exception-store.o dm-snap-transient.o \
dm-snap-persistent.o
dm-mirror-y += dm-raid1.o
+dm-log-userspace-y \
+ += dm-log-userspace-base.o dm-log-userspace-transfer.o
md-mod-y += md.o bitmap.o
raid456-y += raid5.o
raid6_pq-y += raid6algos.o raid6recov.o raid6tables.o \
@@ -36,8 +38,11 @@
obj-$(CONFIG_DM_CRYPT) += dm-crypt.o
obj-$(CONFIG_DM_DELAY) += dm-delay.o
obj-$(CONFIG_DM_MULTIPATH) += dm-multipath.o dm-round-robin.o
+obj-$(CONFIG_DM_MULTIPATH_QL) += dm-queue-length.o
+obj-$(CONFIG_DM_MULTIPATH_ST) += dm-service-time.o
obj-$(CONFIG_DM_SNAPSHOT) += dm-snapshot.o
obj-$(CONFIG_DM_MIRROR) += dm-mirror.o dm-log.o dm-region-hash.o
+obj-$(CONFIG_DM_LOG_USERSPACE) += dm-log-userspace.o
obj-$(CONFIG_DM_ZERO) += dm-zero.o
quiet_cmd_unroll = UNROLL $@
diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c
index 53394e8..9933eb8 100644
--- a/drivers/md/dm-crypt.c
+++ b/drivers/md/dm-crypt.c
@@ -1132,6 +1132,7 @@
goto bad_crypt_queue;
}
+ ti->num_flush_requests = 1;
ti->private = cc;
return 0;
@@ -1189,6 +1190,13 @@
union map_info *map_context)
{
struct dm_crypt_io *io;
+ struct crypt_config *cc;
+
+ if (unlikely(bio_empty_barrier(bio))) {
+ cc = ti->private;
+ bio->bi_bdev = cc->dev->bdev;
+ return DM_MAPIO_REMAPPED;
+ }
io = crypt_io_alloc(ti, bio, bio->bi_sector - ti->begin);
@@ -1305,9 +1313,17 @@
return min(max_size, q->merge_bvec_fn(q, bvm, biovec));
}
+static int crypt_iterate_devices(struct dm_target *ti,
+ iterate_devices_callout_fn fn, void *data)
+{
+ struct crypt_config *cc = ti->private;
+
+ return fn(ti, cc->dev, cc->start, data);
+}
+
static struct target_type crypt_target = {
.name = "crypt",
- .version= {1, 6, 0},
+ .version = {1, 7, 0},
.module = THIS_MODULE,
.ctr = crypt_ctr,
.dtr = crypt_dtr,
@@ -1318,6 +1334,7 @@
.resume = crypt_resume,
.message = crypt_message,
.merge = crypt_merge,
+ .iterate_devices = crypt_iterate_devices,
};
static int __init dm_crypt_init(void)
diff --git a/drivers/md/dm-delay.c b/drivers/md/dm-delay.c
index 559dbb52..4e5b843 100644
--- a/drivers/md/dm-delay.c
+++ b/drivers/md/dm-delay.c
@@ -197,6 +197,7 @@
mutex_init(&dc->timer_lock);
atomic_set(&dc->may_delay, 1);
+ ti->num_flush_requests = 1;
ti->private = dc;
return 0;
@@ -278,8 +279,9 @@
if ((bio_data_dir(bio) == WRITE) && (dc->dev_write)) {
bio->bi_bdev = dc->dev_write->bdev;
- bio->bi_sector = dc->start_write +
- (bio->bi_sector - ti->begin);
+ if (bio_sectors(bio))
+ bio->bi_sector = dc->start_write +
+ (bio->bi_sector - ti->begin);
return delay_bio(dc, dc->write_delay, bio);
}
@@ -316,9 +318,26 @@
return 0;
}
+static int delay_iterate_devices(struct dm_target *ti,
+ iterate_devices_callout_fn fn, void *data)
+{
+ struct delay_c *dc = ti->private;
+ int ret = 0;
+
+ ret = fn(ti, dc->dev_read, dc->start_read, data);
+ if (ret)
+ goto out;
+
+ if (dc->dev_write)
+ ret = fn(ti, dc->dev_write, dc->start_write, data);
+
+out:
+ return ret;
+}
+
static struct target_type delay_target = {
.name = "delay",
- .version = {1, 0, 2},
+ .version = {1, 1, 0},
.module = THIS_MODULE,
.ctr = delay_ctr,
.dtr = delay_dtr,
@@ -326,6 +345,7 @@
.presuspend = delay_presuspend,
.resume = delay_resume,
.status = delay_status,
+ .iterate_devices = delay_iterate_devices,
};
static int __init dm_delay_init(void)
diff --git a/drivers/md/dm-exception-store.c b/drivers/md/dm-exception-store.c
index 75d8081..c3ae515 100644
--- a/drivers/md/dm-exception-store.c
+++ b/drivers/md/dm-exception-store.c
@@ -216,7 +216,7 @@
return -EINVAL;
}
- type = get_type(argv[1]);
+ type = get_type(&persistent);
if (!type) {
ti->error = "Exception store type not recognised";
r = -EINVAL;
diff --git a/drivers/md/dm-exception-store.h b/drivers/md/dm-exception-store.h
index c92701d..2442c8c 100644
--- a/drivers/md/dm-exception-store.h
+++ b/drivers/md/dm-exception-store.h
@@ -156,7 +156,7 @@
*/
static inline sector_t get_dev_size(struct block_device *bdev)
{
- return bdev->bd_inode->i_size >> SECTOR_SHIFT;
+ return i_size_read(bdev->bd_inode) >> SECTOR_SHIFT;
}
static inline chunk_t sector_to_chunk(struct dm_exception_store *store,
diff --git a/drivers/md/dm-io.c b/drivers/md/dm-io.c
index e73aabd..3a2e6a2 100644
--- a/drivers/md/dm-io.c
+++ b/drivers/md/dm-io.c
@@ -22,6 +22,7 @@
/* FIXME: can we shrink this ? */
struct io {
unsigned long error_bits;
+ unsigned long eopnotsupp_bits;
atomic_t count;
struct task_struct *sleeper;
struct dm_io_client *client;
@@ -107,8 +108,11 @@
*---------------------------------------------------------------*/
static void dec_count(struct io *io, unsigned int region, int error)
{
- if (error)
+ if (error) {
set_bit(region, &io->error_bits);
+ if (error == -EOPNOTSUPP)
+ set_bit(region, &io->eopnotsupp_bits);
+ }
if (atomic_dec_and_test(&io->count)) {
if (io->sleeper)
@@ -360,7 +364,9 @@
return -EIO;
}
+retry:
io.error_bits = 0;
+ io.eopnotsupp_bits = 0;
atomic_set(&io.count, 1); /* see dispatch_io() */
io.sleeper = current;
io.client = client;
@@ -377,6 +383,11 @@
}
set_current_state(TASK_RUNNING);
+ if (io.eopnotsupp_bits && (rw & (1 << BIO_RW_BARRIER))) {
+ rw &= ~(1 << BIO_RW_BARRIER);
+ goto retry;
+ }
+
if (error_bits)
*error_bits = io.error_bits;
@@ -397,6 +408,7 @@
io = mempool_alloc(client->pool, GFP_NOIO);
io->error_bits = 0;
+ io->eopnotsupp_bits = 0;
atomic_set(&io->count, 1); /* see dispatch_io() */
io->sleeper = NULL;
io->client = client;
diff --git a/drivers/md/dm-ioctl.c b/drivers/md/dm-ioctl.c
index 1128d3f..7f77f18 100644
--- a/drivers/md/dm-ioctl.c
+++ b/drivers/md/dm-ioctl.c
@@ -276,7 +276,7 @@
up_write(&_hash_lock);
}
-static int dm_hash_rename(const char *old, const char *new)
+static int dm_hash_rename(uint32_t cookie, const char *old, const char *new)
{
char *new_name, *old_name;
struct hash_cell *hc;
@@ -333,7 +333,7 @@
dm_table_put(table);
}
- dm_kobject_uevent(hc->md);
+ dm_kobject_uevent(hc->md, KOBJ_CHANGE, cookie);
dm_put(hc->md);
up_write(&_hash_lock);
@@ -680,6 +680,9 @@
__hash_remove(hc);
up_write(&_hash_lock);
+
+ dm_kobject_uevent(md, KOBJ_REMOVE, param->event_nr);
+
dm_put(md);
param->data_size = 0;
return 0;
@@ -715,7 +718,7 @@
return r;
param->data_size = 0;
- return dm_hash_rename(param->name, new_name);
+ return dm_hash_rename(param->event_nr, param->name, new_name);
}
static int dev_set_geometry(struct dm_ioctl *param, size_t param_size)
@@ -842,8 +845,11 @@
if (dm_suspended(md))
r = dm_resume(md);
- if (!r)
+
+ if (!r) {
+ dm_kobject_uevent(md, KOBJ_CHANGE, param->event_nr);
r = __dev_status(md, param);
+ }
dm_put(md);
return r;
@@ -1044,6 +1050,12 @@
next = spec->next;
}
+ r = dm_table_set_type(table);
+ if (r) {
+ DMWARN("unable to set table type");
+ return r;
+ }
+
return dm_table_complete(table);
}
@@ -1089,6 +1101,13 @@
goto out;
}
+ r = dm_table_alloc_md_mempools(t);
+ if (r) {
+ DMWARN("unable to allocate mempools for this table");
+ dm_table_destroy(t);
+ goto out;
+ }
+
down_write(&_hash_lock);
hc = dm_get_mdptr(md);
if (!hc || hc->md != md) {
diff --git a/drivers/md/dm-linear.c b/drivers/md/dm-linear.c
index 79fb53e..9184b6de 100644
--- a/drivers/md/dm-linear.c
+++ b/drivers/md/dm-linear.c
@@ -53,6 +53,7 @@
goto bad;
}
+ ti->num_flush_requests = 1;
ti->private = lc;
return 0;
@@ -81,7 +82,8 @@
struct linear_c *lc = ti->private;
bio->bi_bdev = lc->dev->bdev;
- bio->bi_sector = linear_map_sector(ti, bio->bi_sector);
+ if (bio_sectors(bio))
+ bio->bi_sector = linear_map_sector(ti, bio->bi_sector);
}
static int linear_map(struct dm_target *ti, struct bio *bio,
@@ -132,9 +134,17 @@
return min(max_size, q->merge_bvec_fn(q, bvm, biovec));
}
+static int linear_iterate_devices(struct dm_target *ti,
+ iterate_devices_callout_fn fn, void *data)
+{
+ struct linear_c *lc = ti->private;
+
+ return fn(ti, lc->dev, lc->start, data);
+}
+
static struct target_type linear_target = {
.name = "linear",
- .version= {1, 0, 3},
+ .version = {1, 1, 0},
.module = THIS_MODULE,
.ctr = linear_ctr,
.dtr = linear_dtr,
@@ -142,6 +152,7 @@
.status = linear_status,
.ioctl = linear_ioctl,
.merge = linear_merge,
+ .iterate_devices = linear_iterate_devices,
};
int __init dm_linear_init(void)
diff --git a/drivers/md/dm-log-userspace-base.c b/drivers/md/dm-log-userspace-base.c
new file mode 100644
index 0000000..e69b965
--- /dev/null
+++ b/drivers/md/dm-log-userspace-base.c
@@ -0,0 +1,696 @@
+/*
+ * Copyright (C) 2006-2009 Red Hat, Inc.
+ *
+ * This file is released under the LGPL.
+ */
+
+#include <linux/bio.h>
+#include <linux/dm-dirty-log.h>
+#include <linux/device-mapper.h>
+#include <linux/dm-log-userspace.h>
+
+#include "dm-log-userspace-transfer.h"
+
+struct flush_entry {
+ int type;
+ region_t region;
+ struct list_head list;
+};
+
+struct log_c {
+ struct dm_target *ti;
+ uint32_t region_size;
+ region_t region_count;
+ char uuid[DM_UUID_LEN];
+
+ char *usr_argv_str;
+ uint32_t usr_argc;
+
+ /*
+ * in_sync_hint gets set when doing is_remote_recovering. It
+ * represents the first region that needs recovery. IOW, the
+ * first zero bit of sync_bits. This can be useful for to limit
+ * traffic for calls like is_remote_recovering and get_resync_work,
+ * but be take care in its use for anything else.
+ */
+ uint64_t in_sync_hint;
+
+ spinlock_t flush_lock;
+ struct list_head flush_list; /* only for clear and mark requests */
+};
+
+static mempool_t *flush_entry_pool;
+
+static void *flush_entry_alloc(gfp_t gfp_mask, void *pool_data)
+{
+ return kmalloc(sizeof(struct flush_entry), gfp_mask);
+}
+
+static void flush_entry_free(void *element, void *pool_data)
+{
+ kfree(element);
+}
+
+static int userspace_do_request(struct log_c *lc, const char *uuid,
+ int request_type, char *data, size_t data_size,
+ char *rdata, size_t *rdata_size)
+{
+ int r;
+
+ /*
+ * If the server isn't there, -ESRCH is returned,
+ * and we must keep trying until the server is
+ * restored.
+ */
+retry:
+ r = dm_consult_userspace(uuid, request_type, data,
+ data_size, rdata, rdata_size);
+
+ if (r != -ESRCH)
+ return r;
+
+ DMERR(" Userspace log server not found.");
+ while (1) {
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(2*HZ);
+ DMWARN("Attempting to contact userspace log server...");
+ r = dm_consult_userspace(uuid, DM_ULOG_CTR, lc->usr_argv_str,
+ strlen(lc->usr_argv_str) + 1,
+ NULL, NULL);
+ if (!r)
+ break;
+ }
+ DMINFO("Reconnected to userspace log server... DM_ULOG_CTR complete");
+ r = dm_consult_userspace(uuid, DM_ULOG_RESUME, NULL,
+ 0, NULL, NULL);
+ if (!r)
+ goto retry;
+
+ DMERR("Error trying to resume userspace log: %d", r);
+
+ return -ESRCH;
+}
+
+static int build_constructor_string(struct dm_target *ti,
+ unsigned argc, char **argv,
+ char **ctr_str)
+{
+ int i, str_size;
+ char *str = NULL;
+
+ *ctr_str = NULL;
+
+ for (i = 0, str_size = 0; i < argc; i++)
+ str_size += strlen(argv[i]) + 1; /* +1 for space between args */
+
+ str_size += 20; /* Max number of chars in a printed u64 number */
+
+ str = kzalloc(str_size, GFP_KERNEL);
+ if (!str) {
+ DMWARN("Unable to allocate memory for constructor string");
+ return -ENOMEM;
+ }
+
+ for (i = 0, str_size = 0; i < argc; i++)
+ str_size += sprintf(str + str_size, "%s ", argv[i]);
+ str_size += sprintf(str + str_size, "%llu",
+ (unsigned long long)ti->len);
+
+ *ctr_str = str;
+ return str_size;
+}
+
+/*
+ * userspace_ctr
+ *
+ * argv contains:
+ * <UUID> <other args>
+ * Where 'other args' is the userspace implementation specific log
+ * arguments. An example might be:
+ * <UUID> clustered_disk <arg count> <log dev> <region_size> [[no]sync]
+ *
+ * So, this module will strip off the <UUID> for identification purposes
+ * when communicating with userspace about a log; but will pass on everything
+ * else.
+ */
+static int userspace_ctr(struct dm_dirty_log *log, struct dm_target *ti,
+ unsigned argc, char **argv)
+{
+ int r = 0;
+ int str_size;
+ char *ctr_str = NULL;
+ struct log_c *lc = NULL;
+ uint64_t rdata;
+ size_t rdata_size = sizeof(rdata);
+
+ if (argc < 3) {
+ DMWARN("Too few arguments to userspace dirty log");
+ return -EINVAL;
+ }
+
+ lc = kmalloc(sizeof(*lc), GFP_KERNEL);
+ if (!lc) {
+ DMWARN("Unable to allocate userspace log context.");
+ return -ENOMEM;
+ }
+
+ lc->ti = ti;
+
+ if (strlen(argv[0]) > (DM_UUID_LEN - 1)) {
+ DMWARN("UUID argument too long.");
+ kfree(lc);
+ return -EINVAL;
+ }
+
+ strncpy(lc->uuid, argv[0], DM_UUID_LEN);
+ spin_lock_init(&lc->flush_lock);
+ INIT_LIST_HEAD(&lc->flush_list);
+
+ str_size = build_constructor_string(ti, argc - 1, argv + 1, &ctr_str);
+ if (str_size < 0) {
+ kfree(lc);
+ return str_size;
+ }
+
+ /* Send table string */
+ r = dm_consult_userspace(lc->uuid, DM_ULOG_CTR,
+ ctr_str, str_size, NULL, NULL);
+
+ if (r == -ESRCH) {
+ DMERR("Userspace log server not found");
+ goto out;
+ }
+
+ /* Since the region size does not change, get it now */
+ rdata_size = sizeof(rdata);
+ r = dm_consult_userspace(lc->uuid, DM_ULOG_GET_REGION_SIZE,
+ NULL, 0, (char *)&rdata, &rdata_size);
+
+ if (r) {
+ DMERR("Failed to get region size of dirty log");
+ goto out;
+ }
+
+ lc->region_size = (uint32_t)rdata;
+ lc->region_count = dm_sector_div_up(ti->len, lc->region_size);
+
+out:
+ if (r) {
+ kfree(lc);
+ kfree(ctr_str);
+ } else {
+ lc->usr_argv_str = ctr_str;
+ lc->usr_argc = argc;
+ log->context = lc;
+ }
+
+ return r;
+}
+
+static void userspace_dtr(struct dm_dirty_log *log)
+{
+ int r;
+ struct log_c *lc = log->context;
+
+ r = dm_consult_userspace(lc->uuid, DM_ULOG_DTR,
+ NULL, 0,
+ NULL, NULL);
+
+ kfree(lc->usr_argv_str);
+ kfree(lc);
+
+ return;
+}
+
+static int userspace_presuspend(struct dm_dirty_log *log)
+{
+ int r;
+ struct log_c *lc = log->context;
+
+ r = dm_consult_userspace(lc->uuid, DM_ULOG_PRESUSPEND,
+ NULL, 0,
+ NULL, NULL);
+
+ return r;
+}
+
+static int userspace_postsuspend(struct dm_dirty_log *log)
+{
+ int r;
+ struct log_c *lc = log->context;
+
+ r = dm_consult_userspace(lc->uuid, DM_ULOG_POSTSUSPEND,
+ NULL, 0,
+ NULL, NULL);
+
+ return r;
+}
+
+static int userspace_resume(struct dm_dirty_log *log)
+{
+ int r;
+ struct log_c *lc = log->context;
+
+ lc->in_sync_hint = 0;
+ r = dm_consult_userspace(lc->uuid, DM_ULOG_RESUME,
+ NULL, 0,
+ NULL, NULL);
+
+ return r;
+}
+
+static uint32_t userspace_get_region_size(struct dm_dirty_log *log)
+{
+ struct log_c *lc = log->context;
+
+ return lc->region_size;
+}
+
+/*
+ * userspace_is_clean
+ *
+ * Check whether a region is clean. If there is any sort of
+ * failure when consulting the server, we return not clean.
+ *
+ * Returns: 1 if clean, 0 otherwise
+ */
+static int userspace_is_clean(struct dm_dirty_log *log, region_t region)
+{
+ int r;
+ uint64_t region64 = (uint64_t)region;
+ int64_t is_clean;
+ size_t rdata_size;
+ struct log_c *lc = log->context;
+
+ rdata_size = sizeof(is_clean);
+ r = userspace_do_request(lc, lc->uuid, DM_ULOG_IS_CLEAN,
+ (char *)®ion64, sizeof(region64),
+ (char *)&is_clean, &rdata_size);
+
+ return (r) ? 0 : (int)is_clean;
+}
+
+/*
+ * userspace_in_sync
+ *
+ * Check if the region is in-sync. If there is any sort
+ * of failure when consulting the server, we assume that
+ * the region is not in sync.
+ *
+ * If 'can_block' is set, return immediately
+ *
+ * Returns: 1 if in-sync, 0 if not-in-sync, -EWOULDBLOCK
+ */
+static int userspace_in_sync(struct dm_dirty_log *log, region_t region,
+ int can_block)
+{
+ int r;
+ uint64_t region64 = region;
+ int64_t in_sync;
+ size_t rdata_size;
+ struct log_c *lc = log->context;
+
+ /*
+ * We can never respond directly - even if in_sync_hint is
+ * set. This is because another machine could see a device
+ * failure and mark the region out-of-sync. If we don't go
+ * to userspace to ask, we might think the region is in-sync
+ * and allow a read to pick up data that is stale. (This is
+ * very unlikely if a device actually fails; but it is very
+ * likely if a connection to one device from one machine fails.)
+ *
+ * There still might be a problem if the mirror caches the region
+ * state as in-sync... but then this call would not be made. So,
+ * that is a mirror problem.
+ */
+ if (!can_block)
+ return -EWOULDBLOCK;
+
+ rdata_size = sizeof(in_sync);
+ r = userspace_do_request(lc, lc->uuid, DM_ULOG_IN_SYNC,
+ (char *)®ion64, sizeof(region64),
+ (char *)&in_sync, &rdata_size);
+ return (r) ? 0 : (int)in_sync;
+}
+
+/*
+ * userspace_flush
+ *
+ * This function is ok to block.
+ * The flush happens in two stages. First, it sends all
+ * clear/mark requests that are on the list. Then it
+ * tells the server to commit them. This gives the
+ * server a chance to optimise the commit, instead of
+ * doing it for every request.
+ *
+ * Additionally, we could implement another thread that
+ * sends the requests up to the server - reducing the
+ * load on flush. Then the flush would have less in
+ * the list and be responsible for the finishing commit.
+ *
+ * Returns: 0 on success, < 0 on failure
+ */
+static int userspace_flush(struct dm_dirty_log *log)
+{
+ int r = 0;
+ unsigned long flags;
+ struct log_c *lc = log->context;
+ LIST_HEAD(flush_list);
+ struct flush_entry *fe, *tmp_fe;
+
+ spin_lock_irqsave(&lc->flush_lock, flags);
+ list_splice_init(&lc->flush_list, &flush_list);
+ spin_unlock_irqrestore(&lc->flush_lock, flags);
+
+ if (list_empty(&flush_list))
+ return 0;
+
+ /*
+ * FIXME: Count up requests, group request types,
+ * allocate memory to stick all requests in and
+ * send to server in one go. Failing the allocation,
+ * do it one by one.
+ */
+
+ list_for_each_entry(fe, &flush_list, list) {
+ r = userspace_do_request(lc, lc->uuid, fe->type,
+ (char *)&fe->region,
+ sizeof(fe->region),
+ NULL, NULL);
+ if (r)
+ goto fail;
+ }
+
+ r = userspace_do_request(lc, lc->uuid, DM_ULOG_FLUSH,
+ NULL, 0, NULL, NULL);
+
+fail:
+ /*
+ * We can safely remove these entries, even if failure.
+ * Calling code will receive an error and will know that
+ * the log facility has failed.
+ */
+ list_for_each_entry_safe(fe, tmp_fe, &flush_list, list) {
+ list_del(&fe->list);
+ mempool_free(fe, flush_entry_pool);
+ }
+
+ if (r)
+ dm_table_event(lc->ti->table);
+
+ return r;
+}
+
+/*
+ * userspace_mark_region
+ *
+ * This function should avoid blocking unless absolutely required.
+ * (Memory allocation is valid for blocking.)
+ */
+static void userspace_mark_region(struct dm_dirty_log *log, region_t region)
+{
+ unsigned long flags;
+ struct log_c *lc = log->context;
+ struct flush_entry *fe;
+
+ /* Wait for an allocation, but _never_ fail */
+ fe = mempool_alloc(flush_entry_pool, GFP_NOIO);
+ BUG_ON(!fe);
+
+ spin_lock_irqsave(&lc->flush_lock, flags);
+ fe->type = DM_ULOG_MARK_REGION;
+ fe->region = region;
+ list_add(&fe->list, &lc->flush_list);
+ spin_unlock_irqrestore(&lc->flush_lock, flags);
+
+ return;
+}
+
+/*
+ * userspace_clear_region
+ *
+ * This function must not block.
+ * So, the alloc can't block. In the worst case, it is ok to
+ * fail. It would simply mean we can't clear the region.
+ * Does nothing to current sync context, but does mean
+ * the region will be re-sync'ed on a reload of the mirror
+ * even though it is in-sync.
+ */
+static void userspace_clear_region(struct dm_dirty_log *log, region_t region)
+{
+ unsigned long flags;
+ struct log_c *lc = log->context;
+ struct flush_entry *fe;
+
+ /*
+ * If we fail to allocate, we skip the clearing of
+ * the region. This doesn't hurt us in any way, except
+ * to cause the region to be resync'ed when the
+ * device is activated next time.
+ */
+ fe = mempool_alloc(flush_entry_pool, GFP_ATOMIC);
+ if (!fe) {
+ DMERR("Failed to allocate memory to clear region.");
+ return;
+ }
+
+ spin_lock_irqsave(&lc->flush_lock, flags);
+ fe->type = DM_ULOG_CLEAR_REGION;
+ fe->region = region;
+ list_add(&fe->list, &lc->flush_list);
+ spin_unlock_irqrestore(&lc->flush_lock, flags);
+
+ return;
+}
+
+/*
+ * userspace_get_resync_work
+ *
+ * Get a region that needs recovery. It is valid to return
+ * an error for this function.
+ *
+ * Returns: 1 if region filled, 0 if no work, <0 on error
+ */
+static int userspace_get_resync_work(struct dm_dirty_log *log, region_t *region)
+{
+ int r;
+ size_t rdata_size;
+ struct log_c *lc = log->context;
+ struct {
+ int64_t i; /* 64-bit for mix arch compatibility */
+ region_t r;
+ } pkg;
+
+ if (lc->in_sync_hint >= lc->region_count)
+ return 0;
+
+ rdata_size = sizeof(pkg);
+ r = userspace_do_request(lc, lc->uuid, DM_ULOG_GET_RESYNC_WORK,
+ NULL, 0,
+ (char *)&pkg, &rdata_size);
+
+ *region = pkg.r;
+ return (r) ? r : (int)pkg.i;
+}
+
+/*
+ * userspace_set_region_sync
+ *
+ * Set the sync status of a given region. This function
+ * must not fail.
+ */
+static void userspace_set_region_sync(struct dm_dirty_log *log,
+ region_t region, int in_sync)
+{
+ int r;
+ struct log_c *lc = log->context;
+ struct {
+ region_t r;
+ int64_t i;
+ } pkg;
+
+ pkg.r = region;
+ pkg.i = (int64_t)in_sync;
+
+ r = userspace_do_request(lc, lc->uuid, DM_ULOG_SET_REGION_SYNC,
+ (char *)&pkg, sizeof(pkg),
+ NULL, NULL);
+
+ /*
+ * It would be nice to be able to report failures.
+ * However, it is easy emough to detect and resolve.
+ */
+ return;
+}
+
+/*
+ * userspace_get_sync_count
+ *
+ * If there is any sort of failure when consulting the server,
+ * we assume that the sync count is zero.
+ *
+ * Returns: sync count on success, 0 on failure
+ */
+static region_t userspace_get_sync_count(struct dm_dirty_log *log)
+{
+ int r;
+ size_t rdata_size;
+ uint64_t sync_count;
+ struct log_c *lc = log->context;
+
+ rdata_size = sizeof(sync_count);
+ r = userspace_do_request(lc, lc->uuid, DM_ULOG_GET_SYNC_COUNT,
+ NULL, 0,
+ (char *)&sync_count, &rdata_size);
+
+ if (r)
+ return 0;
+
+ if (sync_count >= lc->region_count)
+ lc->in_sync_hint = lc->region_count;
+
+ return (region_t)sync_count;
+}
+
+/*
+ * userspace_status
+ *
+ * Returns: amount of space consumed
+ */
+static int userspace_status(struct dm_dirty_log *log, status_type_t status_type,
+ char *result, unsigned maxlen)
+{
+ int r = 0;
+ size_t sz = (size_t)maxlen;
+ struct log_c *lc = log->context;
+
+ switch (status_type) {
+ case STATUSTYPE_INFO:
+ r = userspace_do_request(lc, lc->uuid, DM_ULOG_STATUS_INFO,
+ NULL, 0,
+ result, &sz);
+
+ if (r) {
+ sz = 0;
+ DMEMIT("%s 1 COM_FAILURE", log->type->name);
+ }
+ break;
+ case STATUSTYPE_TABLE:
+ sz = 0;
+ DMEMIT("%s %u %s %s", log->type->name, lc->usr_argc + 1,
+ lc->uuid, lc->usr_argv_str);
+ break;
+ }
+ return (r) ? 0 : (int)sz;
+}
+
+/*
+ * userspace_is_remote_recovering
+ *
+ * Returns: 1 if region recovering, 0 otherwise
+ */
+static int userspace_is_remote_recovering(struct dm_dirty_log *log,
+ region_t region)
+{
+ int r;
+ uint64_t region64 = region;
+ struct log_c *lc = log->context;
+ static unsigned long long limit;
+ struct {
+ int64_t is_recovering;
+ uint64_t in_sync_hint;
+ } pkg;
+ size_t rdata_size = sizeof(pkg);
+
+ /*
+ * Once the mirror has been reported to be in-sync,
+ * it will never again ask for recovery work. So,
+ * we can safely say there is not a remote machine
+ * recovering if the device is in-sync. (in_sync_hint
+ * must be reset at resume time.)
+ */
+ if (region < lc->in_sync_hint)
+ return 0;
+ else if (jiffies < limit)
+ return 1;
+
+ limit = jiffies + (HZ / 4);
+ r = userspace_do_request(lc, lc->uuid, DM_ULOG_IS_REMOTE_RECOVERING,
+ (char *)®ion64, sizeof(region64),
+ (char *)&pkg, &rdata_size);
+ if (r)
+ return 1;
+
+ lc->in_sync_hint = pkg.in_sync_hint;
+
+ return (int)pkg.is_recovering;
+}
+
+static struct dm_dirty_log_type _userspace_type = {
+ .name = "userspace",
+ .module = THIS_MODULE,
+ .ctr = userspace_ctr,
+ .dtr = userspace_dtr,
+ .presuspend = userspace_presuspend,
+ .postsuspend = userspace_postsuspend,
+ .resume = userspace_resume,
+ .get_region_size = userspace_get_region_size,
+ .is_clean = userspace_is_clean,
+ .in_sync = userspace_in_sync,
+ .flush = userspace_flush,
+ .mark_region = userspace_mark_region,
+ .clear_region = userspace_clear_region,
+ .get_resync_work = userspace_get_resync_work,
+ .set_region_sync = userspace_set_region_sync,
+ .get_sync_count = userspace_get_sync_count,
+ .status = userspace_status,
+ .is_remote_recovering = userspace_is_remote_recovering,
+};
+
+static int __init userspace_dirty_log_init(void)
+{
+ int r = 0;
+
+ flush_entry_pool = mempool_create(100, flush_entry_alloc,
+ flush_entry_free, NULL);
+
+ if (!flush_entry_pool) {
+ DMWARN("Unable to create flush_entry_pool: No memory.");
+ return -ENOMEM;
+ }
+
+ r = dm_ulog_tfr_init();
+ if (r) {
+ DMWARN("Unable to initialize userspace log communications");
+ mempool_destroy(flush_entry_pool);
+ return r;
+ }
+
+ r = dm_dirty_log_type_register(&_userspace_type);
+ if (r) {
+ DMWARN("Couldn't register userspace dirty log type");
+ dm_ulog_tfr_exit();
+ mempool_destroy(flush_entry_pool);
+ return r;
+ }
+
+ DMINFO("version 1.0.0 loaded");
+ return 0;
+}
+
+static void __exit userspace_dirty_log_exit(void)
+{
+ dm_dirty_log_type_unregister(&_userspace_type);
+ dm_ulog_tfr_exit();
+ mempool_destroy(flush_entry_pool);
+
+ DMINFO("version 1.0.0 unloaded");
+ return;
+}
+
+module_init(userspace_dirty_log_init);
+module_exit(userspace_dirty_log_exit);
+
+MODULE_DESCRIPTION(DM_NAME " userspace dirty log link");
+MODULE_AUTHOR("Jonathan Brassow <dm-devel@redhat.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/md/dm-log-userspace-transfer.c b/drivers/md/dm-log-userspace-transfer.c
new file mode 100644
index 0000000..0ca1ee7
--- /dev/null
+++ b/drivers/md/dm-log-userspace-transfer.c
@@ -0,0 +1,276 @@
+/*
+ * Copyright (C) 2006-2009 Red Hat, Inc.
+ *
+ * This file is released under the LGPL.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <net/sock.h>
+#include <linux/workqueue.h>
+#include <linux/connector.h>
+#include <linux/device-mapper.h>
+#include <linux/dm-log-userspace.h>
+
+#include "dm-log-userspace-transfer.h"
+
+static uint32_t dm_ulog_seq;
+
+/*
+ * Netlink/Connector is an unreliable protocol. How long should
+ * we wait for a response before assuming it was lost and retrying?
+ * (If we do receive a response after this time, it will be discarded
+ * and the response to the resent request will be waited for.
+ */
+#define DM_ULOG_RETRY_TIMEOUT (15 * HZ)
+
+/*
+ * Pre-allocated space for speed
+ */
+#define DM_ULOG_PREALLOCED_SIZE 512
+static struct cn_msg *prealloced_cn_msg;
+static struct dm_ulog_request *prealloced_ulog_tfr;
+
+static struct cb_id ulog_cn_id = {
+ .idx = CN_IDX_DM,
+ .val = CN_VAL_DM_USERSPACE_LOG
+};
+
+static DEFINE_MUTEX(dm_ulog_lock);
+
+struct receiving_pkg {
+ struct list_head list;
+ struct completion complete;
+
+ uint32_t seq;
+
+ int error;
+ size_t *data_size;
+ char *data;
+};
+
+static DEFINE_SPINLOCK(receiving_list_lock);
+static struct list_head receiving_list;
+
+static int dm_ulog_sendto_server(struct dm_ulog_request *tfr)
+{
+ int r;
+ struct cn_msg *msg = prealloced_cn_msg;
+
+ memset(msg, 0, sizeof(struct cn_msg));
+
+ msg->id.idx = ulog_cn_id.idx;
+ msg->id.val = ulog_cn_id.val;
+ msg->ack = 0;
+ msg->seq = tfr->seq;
+ msg->len = sizeof(struct dm_ulog_request) + tfr->data_size;
+
+ r = cn_netlink_send(msg, 0, gfp_any());
+
+ return r;
+}
+
+/*
+ * Parameters for this function can be either msg or tfr, but not
+ * both. This function fills in the reply for a waiting request.
+ * If just msg is given, then the reply is simply an ACK from userspace
+ * that the request was received.
+ *
+ * Returns: 0 on success, -ENOENT on failure
+ */
+static int fill_pkg(struct cn_msg *msg, struct dm_ulog_request *tfr)
+{
+ uint32_t rtn_seq = (msg) ? msg->seq : (tfr) ? tfr->seq : 0;
+ struct receiving_pkg *pkg;
+
+ /*
+ * The 'receiving_pkg' entries in this list are statically
+ * allocated on the stack in 'dm_consult_userspace'.
+ * Each process that is waiting for a reply from the user
+ * space server will have an entry in this list.
+ *
+ * We are safe to do it this way because the stack space
+ * is unique to each process, but still addressable by
+ * other processes.
+ */
+ list_for_each_entry(pkg, &receiving_list, list) {
+ if (rtn_seq != pkg->seq)
+ continue;
+
+ if (msg) {
+ pkg->error = -msg->ack;
+ /*
+ * If we are trying again, we will need to know our
+ * storage capacity. Otherwise, along with the
+ * error code, we make explicit that we have no data.
+ */
+ if (pkg->error != -EAGAIN)
+ *(pkg->data_size) = 0;
+ } else if (tfr->data_size > *(pkg->data_size)) {
+ DMERR("Insufficient space to receive package [%u] "
+ "(%u vs %lu)", tfr->request_type,
+ tfr->data_size, *(pkg->data_size));
+
+ *(pkg->data_size) = 0;
+ pkg->error = -ENOSPC;
+ } else {
+ pkg->error = tfr->error;
+ memcpy(pkg->data, tfr->data, tfr->data_size);
+ *(pkg->data_size) = tfr->data_size;
+ }
+ complete(&pkg->complete);
+ return 0;
+ }
+
+ return -ENOENT;
+}
+
+/*
+ * This is the connector callback that delivers data
+ * that was sent from userspace.
+ */
+static void cn_ulog_callback(void *data)
+{
+ struct cn_msg *msg = (struct cn_msg *)data;
+ struct dm_ulog_request *tfr = (struct dm_ulog_request *)(msg + 1);
+
+ spin_lock(&receiving_list_lock);
+ if (msg->len == 0)
+ fill_pkg(msg, NULL);
+ else if (msg->len < sizeof(*tfr))
+ DMERR("Incomplete message received (expected %u, got %u): [%u]",
+ (unsigned)sizeof(*tfr), msg->len, msg->seq);
+ else
+ fill_pkg(NULL, tfr);
+ spin_unlock(&receiving_list_lock);
+}
+
+/**
+ * dm_consult_userspace
+ * @uuid: log's uuid (must be DM_UUID_LEN in size)
+ * @request_type: found in include/linux/dm-log-userspace.h
+ * @data: data to tx to the server
+ * @data_size: size of data in bytes
+ * @rdata: place to put return data from server
+ * @rdata_size: value-result (amount of space given/amount of space used)
+ *
+ * rdata_size is undefined on failure.
+ *
+ * Memory used to communicate with userspace is zero'ed
+ * before populating to ensure that no unwanted bits leak
+ * from kernel space to user-space. All userspace log communications
+ * between kernel and user space go through this function.
+ *
+ * Returns: 0 on success, -EXXX on failure
+ **/
+int dm_consult_userspace(const char *uuid, int request_type,
+ char *data, size_t data_size,
+ char *rdata, size_t *rdata_size)
+{
+ int r = 0;
+ size_t dummy = 0;
+ int overhead_size =
+ sizeof(struct dm_ulog_request *) + sizeof(struct cn_msg);
+ struct dm_ulog_request *tfr = prealloced_ulog_tfr;
+ struct receiving_pkg pkg;
+
+ if (data_size > (DM_ULOG_PREALLOCED_SIZE - overhead_size)) {
+ DMINFO("Size of tfr exceeds preallocated size");
+ return -EINVAL;
+ }
+
+ if (!rdata_size)
+ rdata_size = &dummy;
+resend:
+ /*
+ * We serialize the sending of requests so we can
+ * use the preallocated space.
+ */
+ mutex_lock(&dm_ulog_lock);
+
+ memset(tfr, 0, DM_ULOG_PREALLOCED_SIZE - overhead_size);
+ memcpy(tfr->uuid, uuid, DM_UUID_LEN);
+ tfr->seq = dm_ulog_seq++;
+
+ /*
+ * Must be valid request type (all other bits set to
+ * zero). This reserves other bits for possible future
+ * use.
+ */
+ tfr->request_type = request_type & DM_ULOG_REQUEST_MASK;
+
+ tfr->data_size = data_size;
+ if (data && data_size)
+ memcpy(tfr->data, data, data_size);
+
+ memset(&pkg, 0, sizeof(pkg));
+ init_completion(&pkg.complete);
+ pkg.seq = tfr->seq;
+ pkg.data_size = rdata_size;
+ pkg.data = rdata;
+ spin_lock(&receiving_list_lock);
+ list_add(&(pkg.list), &receiving_list);
+ spin_unlock(&receiving_list_lock);
+
+ r = dm_ulog_sendto_server(tfr);
+
+ mutex_unlock(&dm_ulog_lock);
+
+ if (r) {
+ DMERR("Unable to send log request [%u] to userspace: %d",
+ request_type, r);
+ spin_lock(&receiving_list_lock);
+ list_del_init(&(pkg.list));
+ spin_unlock(&receiving_list_lock);
+
+ goto out;
+ }
+
+ r = wait_for_completion_timeout(&(pkg.complete), DM_ULOG_RETRY_TIMEOUT);
+ spin_lock(&receiving_list_lock);
+ list_del_init(&(pkg.list));
+ spin_unlock(&receiving_list_lock);
+ if (!r) {
+ DMWARN("[%s] Request timed out: [%u/%u] - retrying",
+ (strlen(uuid) > 8) ?
+ (uuid + (strlen(uuid) - 8)) : (uuid),
+ request_type, pkg.seq);
+ goto resend;
+ }
+
+ r = pkg.error;
+ if (r == -EAGAIN)
+ goto resend;
+
+out:
+ return r;
+}
+
+int dm_ulog_tfr_init(void)
+{
+ int r;
+ void *prealloced;
+
+ INIT_LIST_HEAD(&receiving_list);
+
+ prealloced = kmalloc(DM_ULOG_PREALLOCED_SIZE, GFP_KERNEL);
+ if (!prealloced)
+ return -ENOMEM;
+
+ prealloced_cn_msg = prealloced;
+ prealloced_ulog_tfr = prealloced + sizeof(struct cn_msg);
+
+ r = cn_add_callback(&ulog_cn_id, "dmlogusr", cn_ulog_callback);
+ if (r) {
+ cn_del_callback(&ulog_cn_id);
+ return r;
+ }
+
+ return 0;
+}
+
+void dm_ulog_tfr_exit(void)
+{
+ cn_del_callback(&ulog_cn_id);
+ kfree(prealloced_cn_msg);
+}
diff --git a/drivers/md/dm-log-userspace-transfer.h b/drivers/md/dm-log-userspace-transfer.h
new file mode 100644
index 0000000..c26d8e4
--- /dev/null
+++ b/drivers/md/dm-log-userspace-transfer.h
@@ -0,0 +1,18 @@
+/*
+ * Copyright (C) 2006-2009 Red Hat, Inc.
+ *
+ * This file is released under the LGPL.
+ */
+
+#ifndef __DM_LOG_USERSPACE_TRANSFER_H__
+#define __DM_LOG_USERSPACE_TRANSFER_H__
+
+#define DM_MSG_PREFIX "dm-log-userspace"
+
+int dm_ulog_tfr_init(void);
+void dm_ulog_tfr_exit(void);
+int dm_consult_userspace(const char *uuid, int request_type,
+ char *data, size_t data_size,
+ char *rdata, size_t *rdata_size);
+
+#endif /* __DM_LOG_USERSPACE_TRANSFER_H__ */
diff --git a/drivers/md/dm-log.c b/drivers/md/dm-log.c
index 6fa8ccf..9443896 100644
--- a/drivers/md/dm-log.c
+++ b/drivers/md/dm-log.c
@@ -412,11 +412,12 @@
/*
* Buffer holds both header and bitset.
*/
- buf_size = dm_round_up((LOG_OFFSET << SECTOR_SHIFT) +
- bitset_size,
- ti->limits.logical_block_size);
+ buf_size =
+ dm_round_up((LOG_OFFSET << SECTOR_SHIFT) + bitset_size,
+ bdev_logical_block_size(lc->header_location.
+ bdev));
- if (buf_size > dev->bdev->bd_inode->i_size) {
+ if (buf_size > i_size_read(dev->bdev->bd_inode)) {
DMWARN("log device %s too small: need %llu bytes",
dev->name, (unsigned long long)buf_size);
kfree(lc);
diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c
index 6a386ab..c70604a 100644
--- a/drivers/md/dm-mpath.c
+++ b/drivers/md/dm-mpath.c
@@ -8,7 +8,6 @@
#include <linux/device-mapper.h>
#include "dm-path-selector.h"
-#include "dm-bio-record.h"
#include "dm-uevent.h"
#include <linux/ctype.h>
@@ -35,6 +34,7 @@
struct dm_path path;
struct work_struct deactivate_path;
+ struct work_struct activate_path;
};
#define path_to_pgpath(__pgp) container_of((__pgp), struct pgpath, path)
@@ -64,8 +64,6 @@
spinlock_t lock;
const char *hw_handler_name;
- struct work_struct activate_path;
- struct pgpath *pgpath_to_activate;
unsigned nr_priority_groups;
struct list_head priority_groups;
unsigned pg_init_required; /* pg_init needs calling? */
@@ -84,7 +82,7 @@
unsigned pg_init_count; /* Number of times pg_init called */
struct work_struct process_queued_ios;
- struct bio_list queued_ios;
+ struct list_head queued_ios;
unsigned queue_size;
struct work_struct trigger_event;
@@ -101,7 +99,7 @@
*/
struct dm_mpath_io {
struct pgpath *pgpath;
- struct dm_bio_details details;
+ size_t nr_bytes;
};
typedef int (*action_fn) (struct pgpath *pgpath);
@@ -128,6 +126,7 @@
if (pgpath) {
pgpath->is_active = 1;
INIT_WORK(&pgpath->deactivate_path, deactivate_path);
+ INIT_WORK(&pgpath->activate_path, activate_path);
}
return pgpath;
@@ -160,7 +159,6 @@
static void free_pgpaths(struct list_head *pgpaths, struct dm_target *ti)
{
- unsigned long flags;
struct pgpath *pgpath, *tmp;
struct multipath *m = ti->private;
@@ -169,10 +167,6 @@
if (m->hw_handler_name)
scsi_dh_detach(bdev_get_queue(pgpath->path.dev->bdev));
dm_put_device(ti, pgpath->path.dev);
- spin_lock_irqsave(&m->lock, flags);
- if (m->pgpath_to_activate == pgpath)
- m->pgpath_to_activate = NULL;
- spin_unlock_irqrestore(&m->lock, flags);
free_pgpath(pgpath);
}
}
@@ -198,11 +192,11 @@
m = kzalloc(sizeof(*m), GFP_KERNEL);
if (m) {
INIT_LIST_HEAD(&m->priority_groups);
+ INIT_LIST_HEAD(&m->queued_ios);
spin_lock_init(&m->lock);
m->queue_io = 1;
INIT_WORK(&m->process_queued_ios, process_queued_ios);
INIT_WORK(&m->trigger_event, trigger_event);
- INIT_WORK(&m->activate_path, activate_path);
m->mpio_pool = mempool_create_slab_pool(MIN_IOS, _mpio_cache);
if (!m->mpio_pool) {
kfree(m);
@@ -250,11 +244,12 @@
m->pg_init_count = 0;
}
-static int __choose_path_in_pg(struct multipath *m, struct priority_group *pg)
+static int __choose_path_in_pg(struct multipath *m, struct priority_group *pg,
+ size_t nr_bytes)
{
struct dm_path *path;
- path = pg->ps.type->select_path(&pg->ps, &m->repeat_count);
+ path = pg->ps.type->select_path(&pg->ps, &m->repeat_count, nr_bytes);
if (!path)
return -ENXIO;
@@ -266,7 +261,7 @@
return 0;
}
-static void __choose_pgpath(struct multipath *m)
+static void __choose_pgpath(struct multipath *m, size_t nr_bytes)
{
struct priority_group *pg;
unsigned bypassed = 1;
@@ -278,12 +273,12 @@
if (m->next_pg) {
pg = m->next_pg;
m->next_pg = NULL;
- if (!__choose_path_in_pg(m, pg))
+ if (!__choose_path_in_pg(m, pg, nr_bytes))
return;
}
/* Don't change PG until it has no remaining paths */
- if (m->current_pg && !__choose_path_in_pg(m, m->current_pg))
+ if (m->current_pg && !__choose_path_in_pg(m, m->current_pg, nr_bytes))
return;
/*
@@ -295,7 +290,7 @@
list_for_each_entry(pg, &m->priority_groups, list) {
if (pg->bypassed == bypassed)
continue;
- if (!__choose_path_in_pg(m, pg))
+ if (!__choose_path_in_pg(m, pg, nr_bytes))
return;
}
} while (bypassed--);
@@ -322,19 +317,21 @@
dm_noflush_suspending(m->ti));
}
-static int map_io(struct multipath *m, struct bio *bio,
+static int map_io(struct multipath *m, struct request *clone,
struct dm_mpath_io *mpio, unsigned was_queued)
{
int r = DM_MAPIO_REMAPPED;
+ size_t nr_bytes = blk_rq_bytes(clone);
unsigned long flags;
struct pgpath *pgpath;
+ struct block_device *bdev;
spin_lock_irqsave(&m->lock, flags);
/* Do we need to select a new pgpath? */
if (!m->current_pgpath ||
(!m->queue_io && (m->repeat_count && --m->repeat_count == 0)))
- __choose_pgpath(m);
+ __choose_pgpath(m, nr_bytes);
pgpath = m->current_pgpath;
@@ -344,21 +341,28 @@
if ((pgpath && m->queue_io) ||
(!pgpath && m->queue_if_no_path)) {
/* Queue for the daemon to resubmit */
- bio_list_add(&m->queued_ios, bio);
+ list_add_tail(&clone->queuelist, &m->queued_ios);
m->queue_size++;
if ((m->pg_init_required && !m->pg_init_in_progress) ||
!m->queue_io)
queue_work(kmultipathd, &m->process_queued_ios);
pgpath = NULL;
r = DM_MAPIO_SUBMITTED;
- } else if (pgpath)
- bio->bi_bdev = pgpath->path.dev->bdev;
- else if (__must_push_back(m))
+ } else if (pgpath) {
+ bdev = pgpath->path.dev->bdev;
+ clone->q = bdev_get_queue(bdev);
+ clone->rq_disk = bdev->bd_disk;
+ } else if (__must_push_back(m))
r = DM_MAPIO_REQUEUE;
else
r = -EIO; /* Failed */
mpio->pgpath = pgpath;
+ mpio->nr_bytes = nr_bytes;
+
+ if (r == DM_MAPIO_REMAPPED && pgpath->pg->ps.type->start_io)
+ pgpath->pg->ps.type->start_io(&pgpath->pg->ps, &pgpath->path,
+ nr_bytes);
spin_unlock_irqrestore(&m->lock, flags);
@@ -396,30 +400,31 @@
{
int r;
unsigned long flags;
- struct bio *bio = NULL, *next;
struct dm_mpath_io *mpio;
union map_info *info;
+ struct request *clone, *n;
+ LIST_HEAD(cl);
spin_lock_irqsave(&m->lock, flags);
- bio = bio_list_get(&m->queued_ios);
+ list_splice_init(&m->queued_ios, &cl);
spin_unlock_irqrestore(&m->lock, flags);
- while (bio) {
- next = bio->bi_next;
- bio->bi_next = NULL;
+ list_for_each_entry_safe(clone, n, &cl, queuelist) {
+ list_del_init(&clone->queuelist);
- info = dm_get_mapinfo(bio);
+ info = dm_get_rq_mapinfo(clone);
mpio = info->ptr;
- r = map_io(m, bio, mpio, 1);
- if (r < 0)
- bio_endio(bio, r);
- else if (r == DM_MAPIO_REMAPPED)
- generic_make_request(bio);
- else if (r == DM_MAPIO_REQUEUE)
- bio_endio(bio, -EIO);
-
- bio = next;
+ r = map_io(m, clone, mpio, 1);
+ if (r < 0) {
+ mempool_free(mpio, m->mpio_pool);
+ dm_kill_unmapped_request(clone, r);
+ } else if (r == DM_MAPIO_REMAPPED)
+ dm_dispatch_request(clone);
+ else if (r == DM_MAPIO_REQUEUE) {
+ mempool_free(mpio, m->mpio_pool);
+ dm_requeue_unmapped_request(clone);
+ }
}
}
@@ -427,8 +432,8 @@
{
struct multipath *m =
container_of(work, struct multipath, process_queued_ios);
- struct pgpath *pgpath = NULL;
- unsigned init_required = 0, must_queue = 1;
+ struct pgpath *pgpath = NULL, *tmp;
+ unsigned must_queue = 1;
unsigned long flags;
spin_lock_irqsave(&m->lock, flags);
@@ -437,7 +442,7 @@
goto out;
if (!m->current_pgpath)
- __choose_pgpath(m);
+ __choose_pgpath(m, 0);
pgpath = m->current_pgpath;
@@ -446,19 +451,15 @@
must_queue = 0;
if (m->pg_init_required && !m->pg_init_in_progress && pgpath) {
- m->pgpath_to_activate = pgpath;
m->pg_init_count++;
m->pg_init_required = 0;
- m->pg_init_in_progress = 1;
- init_required = 1;
+ list_for_each_entry(tmp, &pgpath->pg->pgpaths, list) {
+ if (queue_work(kmpath_handlerd, &tmp->activate_path))
+ m->pg_init_in_progress++;
+ }
}
-
out:
spin_unlock_irqrestore(&m->lock, flags);
-
- if (init_required)
- queue_work(kmpath_handlerd, &m->activate_path);
-
if (!must_queue)
dispatch_queued_ios(m);
}
@@ -553,6 +554,12 @@
return -EINVAL;
}
+ if (ps_argc > as->argc) {
+ dm_put_path_selector(pst);
+ ti->error = "not enough arguments for path selector";
+ return -EINVAL;
+ }
+
r = pst->create(&pg->ps, ps_argc, as->argv);
if (r) {
dm_put_path_selector(pst);
@@ -591,9 +598,20 @@
}
if (m->hw_handler_name) {
- r = scsi_dh_attach(bdev_get_queue(p->path.dev->bdev),
- m->hw_handler_name);
+ struct request_queue *q = bdev_get_queue(p->path.dev->bdev);
+
+ r = scsi_dh_attach(q, m->hw_handler_name);
+ if (r == -EBUSY) {
+ /*
+ * Already attached to different hw_handler,
+ * try to reattach with correct one.
+ */
+ scsi_dh_detach(q);
+ r = scsi_dh_attach(q, m->hw_handler_name);
+ }
+
if (r < 0) {
+ ti->error = "error attaching hardware handler";
dm_put_device(ti, p->path.dev);
goto bad;
}
@@ -699,6 +717,11 @@
if (!hw_argc)
return 0;
+ if (hw_argc > as->argc) {
+ ti->error = "not enough arguments for hardware handler";
+ return -EINVAL;
+ }
+
m->hw_handler_name = kstrdup(shift(as), GFP_KERNEL);
request_module("scsi_dh_%s", m->hw_handler_name);
if (scsi_dh_handler_exist(m->hw_handler_name) == 0) {
@@ -823,6 +846,8 @@
goto bad;
}
+ ti->num_flush_requests = 1;
+
return 0;
bad:
@@ -836,25 +861,29 @@
flush_workqueue(kmpath_handlerd);
flush_workqueue(kmultipathd);
+ flush_scheduled_work();
free_multipath(m);
}
/*
- * Map bios, recording original fields for later in case we have to resubmit
+ * Map cloned requests
*/
-static int multipath_map(struct dm_target *ti, struct bio *bio,
+static int multipath_map(struct dm_target *ti, struct request *clone,
union map_info *map_context)
{
int r;
struct dm_mpath_io *mpio;
struct multipath *m = (struct multipath *) ti->private;
- mpio = mempool_alloc(m->mpio_pool, GFP_NOIO);
- dm_bio_record(&mpio->details, bio);
+ mpio = mempool_alloc(m->mpio_pool, GFP_ATOMIC);
+ if (!mpio)
+ /* ENOMEM, requeue */
+ return DM_MAPIO_REQUEUE;
+ memset(mpio, 0, sizeof(*mpio));
map_context->ptr = mpio;
- bio->bi_rw |= (1 << BIO_RW_FAILFAST_TRANSPORT);
- r = map_io(m, bio, mpio, 0);
+ clone->cmd_flags |= REQ_FAILFAST_TRANSPORT;
+ r = map_io(m, clone, mpio, 0);
if (r < 0 || r == DM_MAPIO_REQUEUE)
mempool_free(mpio, m->mpio_pool);
@@ -924,9 +953,13 @@
pgpath->is_active = 1;
- m->current_pgpath = NULL;
- if (!m->nr_valid_paths++ && m->queue_size)
+ if (!m->nr_valid_paths++ && m->queue_size) {
+ m->current_pgpath = NULL;
queue_work(kmultipathd, &m->process_queued_ios);
+ } else if (m->hw_handler_name && (m->current_pg == pgpath->pg)) {
+ if (queue_work(kmpath_handlerd, &pgpath->activate_path))
+ m->pg_init_in_progress++;
+ }
dm_path_uevent(DM_UEVENT_PATH_REINSTATED, m->ti,
pgpath->path.dev->name, m->nr_valid_paths);
@@ -1102,87 +1135,70 @@
spin_lock_irqsave(&m->lock, flags);
if (errors) {
- DMERR("Could not failover device. Error %d.", errors);
- m->current_pgpath = NULL;
- m->current_pg = NULL;
+ if (pgpath == m->current_pgpath) {
+ DMERR("Could not failover device. Error %d.", errors);
+ m->current_pgpath = NULL;
+ m->current_pg = NULL;
+ }
} else if (!m->pg_init_required) {
m->queue_io = 0;
pg->bypassed = 0;
}
- m->pg_init_in_progress = 0;
- queue_work(kmultipathd, &m->process_queued_ios);
+ m->pg_init_in_progress--;
+ if (!m->pg_init_in_progress)
+ queue_work(kmultipathd, &m->process_queued_ios);
spin_unlock_irqrestore(&m->lock, flags);
}
static void activate_path(struct work_struct *work)
{
int ret;
- struct multipath *m =
- container_of(work, struct multipath, activate_path);
- struct dm_path *path;
- unsigned long flags;
+ struct pgpath *pgpath =
+ container_of(work, struct pgpath, activate_path);
- spin_lock_irqsave(&m->lock, flags);
- path = &m->pgpath_to_activate->path;
- m->pgpath_to_activate = NULL;
- spin_unlock_irqrestore(&m->lock, flags);
- if (!path)
- return;
- ret = scsi_dh_activate(bdev_get_queue(path->dev->bdev));
- pg_init_done(path, ret);
+ ret = scsi_dh_activate(bdev_get_queue(pgpath->path.dev->bdev));
+ pg_init_done(&pgpath->path, ret);
}
/*
* end_io handling
*/
-static int do_end_io(struct multipath *m, struct bio *bio,
+static int do_end_io(struct multipath *m, struct request *clone,
int error, struct dm_mpath_io *mpio)
{
+ /*
+ * We don't queue any clone request inside the multipath target
+ * during end I/O handling, since those clone requests don't have
+ * bio clones. If we queue them inside the multipath target,
+ * we need to make bio clones, that requires memory allocation.
+ * (See drivers/md/dm.c:end_clone_bio() about why the clone requests
+ * don't have bio clones.)
+ * Instead of queueing the clone request here, we queue the original
+ * request into dm core, which will remake a clone request and
+ * clone bios for it and resubmit it later.
+ */
+ int r = DM_ENDIO_REQUEUE;
unsigned long flags;
- if (!error)
+ if (!error && !clone->errors)
return 0; /* I/O complete */
- if ((error == -EWOULDBLOCK) && bio_rw_ahead(bio))
- return error;
-
if (error == -EOPNOTSUPP)
return error;
- spin_lock_irqsave(&m->lock, flags);
- if (!m->nr_valid_paths) {
- if (__must_push_back(m)) {
- spin_unlock_irqrestore(&m->lock, flags);
- return DM_ENDIO_REQUEUE;
- } else if (!m->queue_if_no_path) {
- spin_unlock_irqrestore(&m->lock, flags);
- return -EIO;
- } else {
- spin_unlock_irqrestore(&m->lock, flags);
- goto requeue;
- }
- }
- spin_unlock_irqrestore(&m->lock, flags);
-
if (mpio->pgpath)
fail_path(mpio->pgpath);
- requeue:
- dm_bio_restore(&mpio->details, bio);
-
- /* queue for the daemon to resubmit or fail */
spin_lock_irqsave(&m->lock, flags);
- bio_list_add(&m->queued_ios, bio);
- m->queue_size++;
- if (!m->queue_io)
- queue_work(kmultipathd, &m->process_queued_ios);
+ if (!m->nr_valid_paths && !m->queue_if_no_path && !__must_push_back(m))
+ r = -EIO;
spin_unlock_irqrestore(&m->lock, flags);
- return DM_ENDIO_INCOMPLETE; /* io not complete */
+ return r;
}
-static int multipath_end_io(struct dm_target *ti, struct bio *bio,
+static int multipath_end_io(struct dm_target *ti, struct request *clone,
int error, union map_info *map_context)
{
struct multipath *m = ti->private;
@@ -1191,14 +1207,13 @@
struct path_selector *ps;
int r;
- r = do_end_io(m, bio, error, mpio);
+ r = do_end_io(m, clone, error, mpio);
if (pgpath) {
ps = &pgpath->pg->ps;
if (ps->type->end_io)
- ps->type->end_io(ps, &pgpath->path);
+ ps->type->end_io(ps, &pgpath->path, mpio->nr_bytes);
}
- if (r != DM_ENDIO_INCOMPLETE)
- mempool_free(mpio, m->mpio_pool);
+ mempool_free(mpio, m->mpio_pool);
return r;
}
@@ -1411,7 +1426,7 @@
spin_lock_irqsave(&m->lock, flags);
if (!m->current_pgpath)
- __choose_pgpath(m);
+ __choose_pgpath(m, 0);
if (m->current_pgpath) {
bdev = m->current_pgpath->path.dev->bdev;
@@ -1428,22 +1443,113 @@
return r ? : __blkdev_driver_ioctl(bdev, mode, cmd, arg);
}
+static int multipath_iterate_devices(struct dm_target *ti,
+ iterate_devices_callout_fn fn, void *data)
+{
+ struct multipath *m = ti->private;
+ struct priority_group *pg;
+ struct pgpath *p;
+ int ret = 0;
+
+ list_for_each_entry(pg, &m->priority_groups, list) {
+ list_for_each_entry(p, &pg->pgpaths, list) {
+ ret = fn(ti, p->path.dev, ti->begin, data);
+ if (ret)
+ goto out;
+ }
+ }
+
+out:
+ return ret;
+}
+
+static int __pgpath_busy(struct pgpath *pgpath)
+{
+ struct request_queue *q = bdev_get_queue(pgpath->path.dev->bdev);
+
+ return dm_underlying_device_busy(q);
+}
+
+/*
+ * We return "busy", only when we can map I/Os but underlying devices
+ * are busy (so even if we map I/Os now, the I/Os will wait on
+ * the underlying queue).
+ * In other words, if we want to kill I/Os or queue them inside us
+ * due to map unavailability, we don't return "busy". Otherwise,
+ * dm core won't give us the I/Os and we can't do what we want.
+ */
+static int multipath_busy(struct dm_target *ti)
+{
+ int busy = 0, has_active = 0;
+ struct multipath *m = ti->private;
+ struct priority_group *pg;
+ struct pgpath *pgpath;
+ unsigned long flags;
+
+ spin_lock_irqsave(&m->lock, flags);
+
+ /* Guess which priority_group will be used at next mapping time */
+ if (unlikely(!m->current_pgpath && m->next_pg))
+ pg = m->next_pg;
+ else if (likely(m->current_pg))
+ pg = m->current_pg;
+ else
+ /*
+ * We don't know which pg will be used at next mapping time.
+ * We don't call __choose_pgpath() here to avoid to trigger
+ * pg_init just by busy checking.
+ * So we don't know whether underlying devices we will be using
+ * at next mapping time are busy or not. Just try mapping.
+ */
+ goto out;
+
+ /*
+ * If there is one non-busy active path at least, the path selector
+ * will be able to select it. So we consider such a pg as not busy.
+ */
+ busy = 1;
+ list_for_each_entry(pgpath, &pg->pgpaths, list)
+ if (pgpath->is_active) {
+ has_active = 1;
+
+ if (!__pgpath_busy(pgpath)) {
+ busy = 0;
+ break;
+ }
+ }
+
+ if (!has_active)
+ /*
+ * No active path in this pg, so this pg won't be used and
+ * the current_pg will be changed at next mapping time.
+ * We need to try mapping to determine it.
+ */
+ busy = 0;
+
+out:
+ spin_unlock_irqrestore(&m->lock, flags);
+
+ return busy;
+}
+
/*-----------------------------------------------------------------
* Module setup
*---------------------------------------------------------------*/
static struct target_type multipath_target = {
.name = "multipath",
- .version = {1, 0, 5},
+ .version = {1, 1, 0},
.module = THIS_MODULE,
.ctr = multipath_ctr,
.dtr = multipath_dtr,
- .map = multipath_map,
- .end_io = multipath_end_io,
+ .map_rq = multipath_map,
+ .rq_end_io = multipath_end_io,
.presuspend = multipath_presuspend,
.resume = multipath_resume,
.status = multipath_status,
.message = multipath_message,
.ioctl = multipath_ioctl,
+ .iterate_devices = multipath_iterate_devices,
+ .busy = multipath_busy,
};
static int __init dm_multipath_init(void)
diff --git a/drivers/md/dm-path-selector.h b/drivers/md/dm-path-selector.h
index 27357b8..e7d1fa8 100644
--- a/drivers/md/dm-path-selector.h
+++ b/drivers/md/dm-path-selector.h
@@ -56,7 +56,8 @@
* the path fails.
*/
struct dm_path *(*select_path) (struct path_selector *ps,
- unsigned *repeat_count);
+ unsigned *repeat_count,
+ size_t nr_bytes);
/*
* Notify the selector that a path has failed.
@@ -75,7 +76,10 @@
int (*status) (struct path_selector *ps, struct dm_path *path,
status_type_t type, char *result, unsigned int maxlen);
- int (*end_io) (struct path_selector *ps, struct dm_path *path);
+ int (*start_io) (struct path_selector *ps, struct dm_path *path,
+ size_t nr_bytes);
+ int (*end_io) (struct path_selector *ps, struct dm_path *path,
+ size_t nr_bytes);
};
/* Register a path selector */
diff --git a/drivers/md/dm-queue-length.c b/drivers/md/dm-queue-length.c
new file mode 100644
index 0000000..f92b6ce
--- /dev/null
+++ b/drivers/md/dm-queue-length.c
@@ -0,0 +1,263 @@
+/*
+ * Copyright (C) 2004-2005 IBM Corp. All Rights Reserved.
+ * Copyright (C) 2006-2009 NEC Corporation.
+ *
+ * dm-queue-length.c
+ *
+ * Module Author: Stefan Bader, IBM
+ * Modified by: Kiyoshi Ueda, NEC
+ *
+ * This file is released under the GPL.
+ *
+ * queue-length path selector - choose a path with the least number of
+ * in-flight I/Os.
+ */
+
+#include "dm.h"
+#include "dm-path-selector.h"
+
+#include <linux/slab.h>
+#include <linux/ctype.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <asm/atomic.h>
+
+#define DM_MSG_PREFIX "multipath queue-length"
+#define QL_MIN_IO 128
+#define QL_VERSION "0.1.0"
+
+struct selector {
+ struct list_head valid_paths;
+ struct list_head failed_paths;
+};
+
+struct path_info {
+ struct list_head list;
+ struct dm_path *path;
+ unsigned repeat_count;
+ atomic_t qlen; /* the number of in-flight I/Os */
+};
+
+static struct selector *alloc_selector(void)
+{
+ struct selector *s = kmalloc(sizeof(*s), GFP_KERNEL);
+
+ if (s) {
+ INIT_LIST_HEAD(&s->valid_paths);
+ INIT_LIST_HEAD(&s->failed_paths);
+ }
+
+ return s;
+}
+
+static int ql_create(struct path_selector *ps, unsigned argc, char **argv)
+{
+ struct selector *s = alloc_selector();
+
+ if (!s)
+ return -ENOMEM;
+
+ ps->context = s;
+ return 0;
+}
+
+static void ql_free_paths(struct list_head *paths)
+{
+ struct path_info *pi, *next;
+
+ list_for_each_entry_safe(pi, next, paths, list) {
+ list_del(&pi->list);
+ kfree(pi);
+ }
+}
+
+static void ql_destroy(struct path_selector *ps)
+{
+ struct selector *s = ps->context;
+
+ ql_free_paths(&s->valid_paths);
+ ql_free_paths(&s->failed_paths);
+ kfree(s);
+ ps->context = NULL;
+}
+
+static int ql_status(struct path_selector *ps, struct dm_path *path,
+ status_type_t type, char *result, unsigned maxlen)
+{
+ unsigned sz = 0;
+ struct path_info *pi;
+
+ /* When called with NULL path, return selector status/args. */
+ if (!path)
+ DMEMIT("0 ");
+ else {
+ pi = path->pscontext;
+
+ switch (type) {
+ case STATUSTYPE_INFO:
+ DMEMIT("%d ", atomic_read(&pi->qlen));
+ break;
+ case STATUSTYPE_TABLE:
+ DMEMIT("%u ", pi->repeat_count);
+ break;
+ }
+ }
+
+ return sz;
+}
+
+static int ql_add_path(struct path_selector *ps, struct dm_path *path,
+ int argc, char **argv, char **error)
+{
+ struct selector *s = ps->context;
+ struct path_info *pi;
+ unsigned repeat_count = QL_MIN_IO;
+
+ /*
+ * Arguments: [<repeat_count>]
+ * <repeat_count>: The number of I/Os before switching path.
+ * If not given, default (QL_MIN_IO) is used.
+ */
+ if (argc > 1) {
+ *error = "queue-length ps: incorrect number of arguments";
+ return -EINVAL;
+ }
+
+ if ((argc == 1) && (sscanf(argv[0], "%u", &repeat_count) != 1)) {
+ *error = "queue-length ps: invalid repeat count";
+ return -EINVAL;
+ }
+
+ /* Allocate the path information structure */
+ pi = kmalloc(sizeof(*pi), GFP_KERNEL);
+ if (!pi) {
+ *error = "queue-length ps: Error allocating path information";
+ return -ENOMEM;
+ }
+
+ pi->path = path;
+ pi->repeat_count = repeat_count;
+ atomic_set(&pi->qlen, 0);
+
+ path->pscontext = pi;
+
+ list_add_tail(&pi->list, &s->valid_paths);
+
+ return 0;
+}
+
+static void ql_fail_path(struct path_selector *ps, struct dm_path *path)
+{
+ struct selector *s = ps->context;
+ struct path_info *pi = path->pscontext;
+
+ list_move(&pi->list, &s->failed_paths);
+}
+
+static int ql_reinstate_path(struct path_selector *ps, struct dm_path *path)
+{
+ struct selector *s = ps->context;
+ struct path_info *pi = path->pscontext;
+
+ list_move_tail(&pi->list, &s->valid_paths);
+
+ return 0;
+}
+
+/*
+ * Select a path having the minimum number of in-flight I/Os
+ */
+static struct dm_path *ql_select_path(struct path_selector *ps,
+ unsigned *repeat_count, size_t nr_bytes)
+{
+ struct selector *s = ps->context;
+ struct path_info *pi = NULL, *best = NULL;
+
+ if (list_empty(&s->valid_paths))
+ return NULL;
+
+ /* Change preferred (first in list) path to evenly balance. */
+ list_move_tail(s->valid_paths.next, &s->valid_paths);
+
+ list_for_each_entry(pi, &s->valid_paths, list) {
+ if (!best ||
+ (atomic_read(&pi->qlen) < atomic_read(&best->qlen)))
+ best = pi;
+
+ if (!atomic_read(&best->qlen))
+ break;
+ }
+
+ if (!best)
+ return NULL;
+
+ *repeat_count = best->repeat_count;
+
+ return best->path;
+}
+
+static int ql_start_io(struct path_selector *ps, struct dm_path *path,
+ size_t nr_bytes)
+{
+ struct path_info *pi = path->pscontext;
+
+ atomic_inc(&pi->qlen);
+
+ return 0;
+}
+
+static int ql_end_io(struct path_selector *ps, struct dm_path *path,
+ size_t nr_bytes)
+{
+ struct path_info *pi = path->pscontext;
+
+ atomic_dec(&pi->qlen);
+
+ return 0;
+}
+
+static struct path_selector_type ql_ps = {
+ .name = "queue-length",
+ .module = THIS_MODULE,
+ .table_args = 1,
+ .info_args = 1,
+ .create = ql_create,
+ .destroy = ql_destroy,
+ .status = ql_status,
+ .add_path = ql_add_path,
+ .fail_path = ql_fail_path,
+ .reinstate_path = ql_reinstate_path,
+ .select_path = ql_select_path,
+ .start_io = ql_start_io,
+ .end_io = ql_end_io,
+};
+
+static int __init dm_ql_init(void)
+{
+ int r = dm_register_path_selector(&ql_ps);
+
+ if (r < 0)
+ DMERR("register failed %d", r);
+
+ DMINFO("version " QL_VERSION " loaded");
+
+ return r;
+}
+
+static void __exit dm_ql_exit(void)
+{
+ int r = dm_unregister_path_selector(&ql_ps);
+
+ if (r < 0)
+ DMERR("unregister failed %d", r);
+}
+
+module_init(dm_ql_init);
+module_exit(dm_ql_exit);
+
+MODULE_AUTHOR("Stefan Bader <Stefan.Bader at de.ibm.com>");
+MODULE_DESCRIPTION(
+ "(C) Copyright IBM Corp. 2004,2005 All Rights Reserved.\n"
+ DM_NAME " path selector to balance the number of in-flight I/Os"
+);
+MODULE_LICENSE("GPL");
diff --git a/drivers/md/dm-raid1.c b/drivers/md/dm-raid1.c
index 076fbb4..ce8868c 100644
--- a/drivers/md/dm-raid1.c
+++ b/drivers/md/dm-raid1.c
@@ -1283,9 +1283,23 @@
return 0;
}
+static int mirror_iterate_devices(struct dm_target *ti,
+ iterate_devices_callout_fn fn, void *data)
+{
+ struct mirror_set *ms = ti->private;
+ int ret = 0;
+ unsigned i;
+
+ for (i = 0; !ret && i < ms->nr_mirrors; i++)
+ ret = fn(ti, ms->mirror[i].dev,
+ ms->mirror[i].offset, data);
+
+ return ret;
+}
+
static struct target_type mirror_target = {
.name = "mirror",
- .version = {1, 0, 20},
+ .version = {1, 12, 0},
.module = THIS_MODULE,
.ctr = mirror_ctr,
.dtr = mirror_dtr,
@@ -1295,6 +1309,7 @@
.postsuspend = mirror_postsuspend,
.resume = mirror_resume,
.status = mirror_status,
+ .iterate_devices = mirror_iterate_devices,
};
static int __init dm_mirror_init(void)
diff --git a/drivers/md/dm-region-hash.c b/drivers/md/dm-region-hash.c
index 7b899be..36dbe29 100644
--- a/drivers/md/dm-region-hash.c
+++ b/drivers/md/dm-region-hash.c
@@ -283,7 +283,7 @@
nreg = mempool_alloc(rh->region_pool, GFP_ATOMIC);
if (unlikely(!nreg))
- nreg = kmalloc(sizeof(*nreg), GFP_NOIO);
+ nreg = kmalloc(sizeof(*nreg), GFP_NOIO | __GFP_NOFAIL);
nreg->state = rh->log->type->in_sync(rh->log, region, 1) ?
DM_RH_CLEAN : DM_RH_NOSYNC;
diff --git a/drivers/md/dm-round-robin.c b/drivers/md/dm-round-robin.c
index cdfbf65..24752f4 100644
--- a/drivers/md/dm-round-robin.c
+++ b/drivers/md/dm-round-robin.c
@@ -161,7 +161,7 @@
}
static struct dm_path *rr_select_path(struct path_selector *ps,
- unsigned *repeat_count)
+ unsigned *repeat_count, size_t nr_bytes)
{
struct selector *s = (struct selector *) ps->context;
struct path_info *pi = NULL;
diff --git a/drivers/md/dm-service-time.c b/drivers/md/dm-service-time.c
new file mode 100644
index 0000000..cfa668f
--- /dev/null
+++ b/drivers/md/dm-service-time.c
@@ -0,0 +1,339 @@
+/*
+ * Copyright (C) 2007-2009 NEC Corporation. All Rights Reserved.
+ *
+ * Module Author: Kiyoshi Ueda
+ *
+ * This file is released under the GPL.
+ *
+ * Throughput oriented path selector.
+ */
+
+#include "dm.h"
+#include "dm-path-selector.h"
+
+#define DM_MSG_PREFIX "multipath service-time"
+#define ST_MIN_IO 1
+#define ST_MAX_RELATIVE_THROUGHPUT 100
+#define ST_MAX_RELATIVE_THROUGHPUT_SHIFT 7
+#define ST_MAX_INFLIGHT_SIZE ((size_t)-1 >> ST_MAX_RELATIVE_THROUGHPUT_SHIFT)
+#define ST_VERSION "0.2.0"
+
+struct selector {
+ struct list_head valid_paths;
+ struct list_head failed_paths;
+};
+
+struct path_info {
+ struct list_head list;
+ struct dm_path *path;
+ unsigned repeat_count;
+ unsigned relative_throughput;
+ atomic_t in_flight_size; /* Total size of in-flight I/Os */
+};
+
+static struct selector *alloc_selector(void)
+{
+ struct selector *s = kmalloc(sizeof(*s), GFP_KERNEL);
+
+ if (s) {
+ INIT_LIST_HEAD(&s->valid_paths);
+ INIT_LIST_HEAD(&s->failed_paths);
+ }
+
+ return s;
+}
+
+static int st_create(struct path_selector *ps, unsigned argc, char **argv)
+{
+ struct selector *s = alloc_selector();
+
+ if (!s)
+ return -ENOMEM;
+
+ ps->context = s;
+ return 0;
+}
+
+static void free_paths(struct list_head *paths)
+{
+ struct path_info *pi, *next;
+
+ list_for_each_entry_safe(pi, next, paths, list) {
+ list_del(&pi->list);
+ kfree(pi);
+ }
+}
+
+static void st_destroy(struct path_selector *ps)
+{
+ struct selector *s = ps->context;
+
+ free_paths(&s->valid_paths);
+ free_paths(&s->failed_paths);
+ kfree(s);
+ ps->context = NULL;
+}
+
+static int st_status(struct path_selector *ps, struct dm_path *path,
+ status_type_t type, char *result, unsigned maxlen)
+{
+ unsigned sz = 0;
+ struct path_info *pi;
+
+ if (!path)
+ DMEMIT("0 ");
+ else {
+ pi = path->pscontext;
+
+ switch (type) {
+ case STATUSTYPE_INFO:
+ DMEMIT("%d %u ", atomic_read(&pi->in_flight_size),
+ pi->relative_throughput);
+ break;
+ case STATUSTYPE_TABLE:
+ DMEMIT("%u %u ", pi->repeat_count,
+ pi->relative_throughput);
+ break;
+ }
+ }
+
+ return sz;
+}
+
+static int st_add_path(struct path_selector *ps, struct dm_path *path,
+ int argc, char **argv, char **error)
+{
+ struct selector *s = ps->context;
+ struct path_info *pi;
+ unsigned repeat_count = ST_MIN_IO;
+ unsigned relative_throughput = 1;
+
+ /*
+ * Arguments: [<repeat_count> [<relative_throughput>]]
+ * <repeat_count>: The number of I/Os before switching path.
+ * If not given, default (ST_MIN_IO) is used.
+ * <relative_throughput>: The relative throughput value of
+ * the path among all paths in the path-group.
+ * The valid range: 0-<ST_MAX_RELATIVE_THROUGHPUT>
+ * If not given, minimum value '1' is used.
+ * If '0' is given, the path isn't selected while
+ * other paths having a positive value are
+ * available.
+ */
+ if (argc > 2) {
+ *error = "service-time ps: incorrect number of arguments";
+ return -EINVAL;
+ }
+
+ if (argc && (sscanf(argv[0], "%u", &repeat_count) != 1)) {
+ *error = "service-time ps: invalid repeat count";
+ return -EINVAL;
+ }
+
+ if ((argc == 2) &&
+ (sscanf(argv[1], "%u", &relative_throughput) != 1 ||
+ relative_throughput > ST_MAX_RELATIVE_THROUGHPUT)) {
+ *error = "service-time ps: invalid relative_throughput value";
+ return -EINVAL;
+ }
+
+ /* allocate the path */
+ pi = kmalloc(sizeof(*pi), GFP_KERNEL);
+ if (!pi) {
+ *error = "service-time ps: Error allocating path context";
+ return -ENOMEM;
+ }
+
+ pi->path = path;
+ pi->repeat_count = repeat_count;
+ pi->relative_throughput = relative_throughput;
+ atomic_set(&pi->in_flight_size, 0);
+
+ path->pscontext = pi;
+
+ list_add_tail(&pi->list, &s->valid_paths);
+
+ return 0;
+}
+
+static void st_fail_path(struct path_selector *ps, struct dm_path *path)
+{
+ struct selector *s = ps->context;
+ struct path_info *pi = path->pscontext;
+
+ list_move(&pi->list, &s->failed_paths);
+}
+
+static int st_reinstate_path(struct path_selector *ps, struct dm_path *path)
+{
+ struct selector *s = ps->context;
+ struct path_info *pi = path->pscontext;
+
+ list_move_tail(&pi->list, &s->valid_paths);
+
+ return 0;
+}
+
+/*
+ * Compare the estimated service time of 2 paths, pi1 and pi2,
+ * for the incoming I/O.
+ *
+ * Returns:
+ * < 0 : pi1 is better
+ * 0 : no difference between pi1 and pi2
+ * > 0 : pi2 is better
+ *
+ * Description:
+ * Basically, the service time is estimated by:
+ * ('pi->in-flight-size' + 'incoming') / 'pi->relative_throughput'
+ * To reduce the calculation, some optimizations are made.
+ * (See comments inline)
+ */
+static int st_compare_load(struct path_info *pi1, struct path_info *pi2,
+ size_t incoming)
+{
+ size_t sz1, sz2, st1, st2;
+
+ sz1 = atomic_read(&pi1->in_flight_size);
+ sz2 = atomic_read(&pi2->in_flight_size);
+
+ /*
+ * Case 1: Both have same throughput value. Choose less loaded path.
+ */
+ if (pi1->relative_throughput == pi2->relative_throughput)
+ return sz1 - sz2;
+
+ /*
+ * Case 2a: Both have same load. Choose higher throughput path.
+ * Case 2b: One path has no throughput value. Choose the other one.
+ */
+ if (sz1 == sz2 ||
+ !pi1->relative_throughput || !pi2->relative_throughput)
+ return pi2->relative_throughput - pi1->relative_throughput;
+
+ /*
+ * Case 3: Calculate service time. Choose faster path.
+ * Service time using pi1:
+ * st1 = (sz1 + incoming) / pi1->relative_throughput
+ * Service time using pi2:
+ * st2 = (sz2 + incoming) / pi2->relative_throughput
+ *
+ * To avoid the division, transform the expression to use
+ * multiplication.
+ * Because ->relative_throughput > 0 here, if st1 < st2,
+ * the expressions below are the same meaning:
+ * (sz1 + incoming) / pi1->relative_throughput <
+ * (sz2 + incoming) / pi2->relative_throughput
+ * (sz1 + incoming) * pi2->relative_throughput <
+ * (sz2 + incoming) * pi1->relative_throughput
+ * So use the later one.
+ */
+ sz1 += incoming;
+ sz2 += incoming;
+ if (unlikely(sz1 >= ST_MAX_INFLIGHT_SIZE ||
+ sz2 >= ST_MAX_INFLIGHT_SIZE)) {
+ /*
+ * Size may be too big for multiplying pi->relative_throughput
+ * and overflow.
+ * To avoid the overflow and mis-selection, shift down both.
+ */
+ sz1 >>= ST_MAX_RELATIVE_THROUGHPUT_SHIFT;
+ sz2 >>= ST_MAX_RELATIVE_THROUGHPUT_SHIFT;
+ }
+ st1 = sz1 * pi2->relative_throughput;
+ st2 = sz2 * pi1->relative_throughput;
+ if (st1 != st2)
+ return st1 - st2;
+
+ /*
+ * Case 4: Service time is equal. Choose higher throughput path.
+ */
+ return pi2->relative_throughput - pi1->relative_throughput;
+}
+
+static struct dm_path *st_select_path(struct path_selector *ps,
+ unsigned *repeat_count, size_t nr_bytes)
+{
+ struct selector *s = ps->context;
+ struct path_info *pi = NULL, *best = NULL;
+
+ if (list_empty(&s->valid_paths))
+ return NULL;
+
+ /* Change preferred (first in list) path to evenly balance. */
+ list_move_tail(s->valid_paths.next, &s->valid_paths);
+
+ list_for_each_entry(pi, &s->valid_paths, list)
+ if (!best || (st_compare_load(pi, best, nr_bytes) < 0))
+ best = pi;
+
+ if (!best)
+ return NULL;
+
+ *repeat_count = best->repeat_count;
+
+ return best->path;
+}
+
+static int st_start_io(struct path_selector *ps, struct dm_path *path,
+ size_t nr_bytes)
+{
+ struct path_info *pi = path->pscontext;
+
+ atomic_add(nr_bytes, &pi->in_flight_size);
+
+ return 0;
+}
+
+static int st_end_io(struct path_selector *ps, struct dm_path *path,
+ size_t nr_bytes)
+{
+ struct path_info *pi = path->pscontext;
+
+ atomic_sub(nr_bytes, &pi->in_flight_size);
+
+ return 0;
+}
+
+static struct path_selector_type st_ps = {
+ .name = "service-time",
+ .module = THIS_MODULE,
+ .table_args = 2,
+ .info_args = 2,
+ .create = st_create,
+ .destroy = st_destroy,
+ .status = st_status,
+ .add_path = st_add_path,
+ .fail_path = st_fail_path,
+ .reinstate_path = st_reinstate_path,
+ .select_path = st_select_path,
+ .start_io = st_start_io,
+ .end_io = st_end_io,
+};
+
+static int __init dm_st_init(void)
+{
+ int r = dm_register_path_selector(&st_ps);
+
+ if (r < 0)
+ DMERR("register failed %d", r);
+
+ DMINFO("version " ST_VERSION " loaded");
+
+ return r;
+}
+
+static void __exit dm_st_exit(void)
+{
+ int r = dm_unregister_path_selector(&st_ps);
+
+ if (r < 0)
+ DMERR("unregister failed %d", r);
+}
+
+module_init(dm_st_init);
+module_exit(dm_st_exit);
+
+MODULE_DESCRIPTION(DM_NAME " throughput oriented path selector");
+MODULE_AUTHOR("Kiyoshi Ueda <k-ueda@ct.jp.nec.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/md/dm-snap-persistent.c b/drivers/md/dm-snap-persistent.c
index 2662a41..6e3fe4f 100644
--- a/drivers/md/dm-snap-persistent.c
+++ b/drivers/md/dm-snap-persistent.c
@@ -636,7 +636,7 @@
/*
* Commit exceptions to disk.
*/
- if (ps->valid && area_io(ps, WRITE))
+ if (ps->valid && area_io(ps, WRITE_BARRIER))
ps->valid = 0;
/*
diff --git a/drivers/md/dm-snap.c b/drivers/md/dm-snap.c
index d73f17f..d573165 100644
--- a/drivers/md/dm-snap.c
+++ b/drivers/md/dm-snap.c
@@ -678,6 +678,7 @@
ti->private = s;
ti->split_io = s->store->chunk_size;
+ ti->num_flush_requests = 1;
return 0;
@@ -1030,6 +1031,11 @@
chunk_t chunk;
struct dm_snap_pending_exception *pe = NULL;
+ if (unlikely(bio_empty_barrier(bio))) {
+ bio->bi_bdev = s->store->cow->bdev;
+ return DM_MAPIO_REMAPPED;
+ }
+
chunk = sector_to_chunk(s->store, bio->bi_sector);
/* Full snapshots are not usable */
@@ -1338,6 +1344,8 @@
}
ti->private = dev;
+ ti->num_flush_requests = 1;
+
return 0;
}
@@ -1353,6 +1361,9 @@
struct dm_dev *dev = ti->private;
bio->bi_bdev = dev->bdev;
+ if (unlikely(bio_empty_barrier(bio)))
+ return DM_MAPIO_REMAPPED;
+
/* Only tell snapshots if this is a write */
return (bio_rw(bio) == WRITE) ? do_origin(dev, bio) : DM_MAPIO_REMAPPED;
}
diff --git a/drivers/md/dm-stripe.c b/drivers/md/dm-stripe.c
index 41569bc..b240e85 100644
--- a/drivers/md/dm-stripe.c
+++ b/drivers/md/dm-stripe.c
@@ -167,6 +167,7 @@
sc->stripes = stripes;
sc->stripe_width = width;
ti->split_io = chunk_size;
+ ti->num_flush_requests = stripes;
sc->chunk_mask = ((sector_t) chunk_size) - 1;
for (sc->chunk_shift = 0; chunk_size; sc->chunk_shift++)
@@ -211,10 +212,18 @@
union map_info *map_context)
{
struct stripe_c *sc = (struct stripe_c *) ti->private;
+ sector_t offset, chunk;
+ uint32_t stripe;
- sector_t offset = bio->bi_sector - ti->begin;
- sector_t chunk = offset >> sc->chunk_shift;
- uint32_t stripe = sector_div(chunk, sc->stripes);
+ if (unlikely(bio_empty_barrier(bio))) {
+ BUG_ON(map_context->flush_request >= sc->stripes);
+ bio->bi_bdev = sc->stripe[map_context->flush_request].dev->bdev;
+ return DM_MAPIO_REMAPPED;
+ }
+
+ offset = bio->bi_sector - ti->begin;
+ chunk = offset >> sc->chunk_shift;
+ stripe = sector_div(chunk, sc->stripes);
bio->bi_bdev = sc->stripe[stripe].dev->bdev;
bio->bi_sector = sc->stripe[stripe].physical_start +
@@ -304,15 +313,31 @@
return error;
}
+static int stripe_iterate_devices(struct dm_target *ti,
+ iterate_devices_callout_fn fn, void *data)
+{
+ struct stripe_c *sc = ti->private;
+ int ret = 0;
+ unsigned i = 0;
+
+ do
+ ret = fn(ti, sc->stripe[i].dev,
+ sc->stripe[i].physical_start, data);
+ while (!ret && ++i < sc->stripes);
+
+ return ret;
+}
+
static struct target_type stripe_target = {
.name = "striped",
- .version = {1, 1, 0},
+ .version = {1, 2, 0},
.module = THIS_MODULE,
.ctr = stripe_ctr,
.dtr = stripe_dtr,
.map = stripe_map,
.end_io = stripe_end_io,
.status = stripe_status,
+ .iterate_devices = stripe_iterate_devices,
};
int __init dm_stripe_init(void)
diff --git a/drivers/md/dm-sysfs.c b/drivers/md/dm-sysfs.c
index a2a45e6..4b04590 100644
--- a/drivers/md/dm-sysfs.c
+++ b/drivers/md/dm-sysfs.c
@@ -57,12 +57,21 @@
return strlen(buf);
}
+static ssize_t dm_attr_suspended_show(struct mapped_device *md, char *buf)
+{
+ sprintf(buf, "%d\n", dm_suspended(md));
+
+ return strlen(buf);
+}
+
static DM_ATTR_RO(name);
static DM_ATTR_RO(uuid);
+static DM_ATTR_RO(suspended);
static struct attribute *dm_attrs[] = {
&dm_attr_name.attr,
&dm_attr_uuid.attr,
+ &dm_attr_suspended.attr,
NULL,
};
diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c
index e9a73bb..4899ebe 100644
--- a/drivers/md/dm-table.c
+++ b/drivers/md/dm-table.c
@@ -41,6 +41,7 @@
struct dm_table {
struct mapped_device *md;
atomic_t holders;
+ unsigned type;
/* btree table */
unsigned int depth;
@@ -62,15 +63,11 @@
/* a list of devices used by this table */
struct list_head devices;
- /*
- * These are optimistic limits taken from all the
- * targets, some targets will need smaller limits.
- */
- struct io_restrictions limits;
-
/* events get handed up using this callback */
void (*event_fn)(void *);
void *event_context;
+
+ struct dm_md_mempools *mempools;
};
/*
@@ -89,43 +86,6 @@
}
/*
- * Returns the minimum that is _not_ zero, unless both are zero.
- */
-#define min_not_zero(l, r) (l == 0) ? r : ((r == 0) ? l : min(l, r))
-
-/*
- * Combine two io_restrictions, always taking the lower value.
- */
-static void combine_restrictions_low(struct io_restrictions *lhs,
- struct io_restrictions *rhs)
-{
- lhs->max_sectors =
- min_not_zero(lhs->max_sectors, rhs->max_sectors);
-
- lhs->max_phys_segments =
- min_not_zero(lhs->max_phys_segments, rhs->max_phys_segments);
-
- lhs->max_hw_segments =
- min_not_zero(lhs->max_hw_segments, rhs->max_hw_segments);
-
- lhs->logical_block_size = max(lhs->logical_block_size,
- rhs->logical_block_size);
-
- lhs->max_segment_size =
- min_not_zero(lhs->max_segment_size, rhs->max_segment_size);
-
- lhs->max_hw_sectors =
- min_not_zero(lhs->max_hw_sectors, rhs->max_hw_sectors);
-
- lhs->seg_boundary_mask =
- min_not_zero(lhs->seg_boundary_mask, rhs->seg_boundary_mask);
-
- lhs->bounce_pfn = min_not_zero(lhs->bounce_pfn, rhs->bounce_pfn);
-
- lhs->no_cluster |= rhs->no_cluster;
-}
-
-/*
* Calculate the index of the child node of the n'th node k'th key.
*/
static inline unsigned int get_child(unsigned int n, unsigned int k)
@@ -267,6 +227,8 @@
list_for_each_safe(tmp, next, devices) {
struct dm_dev_internal *dd =
list_entry(tmp, struct dm_dev_internal, list);
+ DMWARN("dm_table_destroy: dm_put_device call missing for %s",
+ dd->dm_dev.name);
kfree(dd);
}
}
@@ -296,12 +258,10 @@
vfree(t->highs);
/* free the device list */
- if (t->devices.next != &t->devices) {
- DMWARN("devices still present during destroy: "
- "dm_table_remove_device calls missing");
-
+ if (t->devices.next != &t->devices)
free_devices(&t->devices);
- }
+
+ dm_free_md_mempools(t->mempools);
kfree(t);
}
@@ -385,15 +345,48 @@
/*
* If possible, this checks an area of a destination device is valid.
*/
-static int check_device_area(struct dm_dev_internal *dd, sector_t start,
- sector_t len)
+static int device_area_is_valid(struct dm_target *ti, struct dm_dev *dev,
+ sector_t start, void *data)
{
- sector_t dev_size = dd->dm_dev.bdev->bd_inode->i_size >> SECTOR_SHIFT;
+ struct queue_limits *limits = data;
+ struct block_device *bdev = dev->bdev;
+ sector_t dev_size =
+ i_size_read(bdev->bd_inode) >> SECTOR_SHIFT;
+ unsigned short logical_block_size_sectors =
+ limits->logical_block_size >> SECTOR_SHIFT;
+ char b[BDEVNAME_SIZE];
if (!dev_size)
return 1;
- return ((start < dev_size) && (len <= (dev_size - start)));
+ if ((start >= dev_size) || (start + ti->len > dev_size)) {
+ DMWARN("%s: %s too small for target",
+ dm_device_name(ti->table->md), bdevname(bdev, b));
+ return 0;
+ }
+
+ if (logical_block_size_sectors <= 1)
+ return 1;
+
+ if (start & (logical_block_size_sectors - 1)) {
+ DMWARN("%s: start=%llu not aligned to h/w "
+ "logical block size %hu of %s",
+ dm_device_name(ti->table->md),
+ (unsigned long long)start,
+ limits->logical_block_size, bdevname(bdev, b));
+ return 0;
+ }
+
+ if (ti->len & (logical_block_size_sectors - 1)) {
+ DMWARN("%s: len=%llu not aligned to h/w "
+ "logical block size %hu of %s",
+ dm_device_name(ti->table->md),
+ (unsigned long long)ti->len,
+ limits->logical_block_size, bdevname(bdev, b));
+ return 0;
+ }
+
+ return 1;
}
/*
@@ -479,38 +472,32 @@
}
atomic_inc(&dd->count);
- if (!check_device_area(dd, start, len)) {
- DMWARN("device %s too small for target", path);
- dm_put_device(ti, &dd->dm_dev);
- return -EINVAL;
- }
-
*result = &dd->dm_dev;
-
return 0;
}
-void dm_set_device_limits(struct dm_target *ti, struct block_device *bdev)
+/*
+ * Returns the minimum that is _not_ zero, unless both are zero.
+ */
+#define min_not_zero(l, r) (l == 0) ? r : ((r == 0) ? l : min(l, r))
+
+int dm_set_device_limits(struct dm_target *ti, struct dm_dev *dev,
+ sector_t start, void *data)
{
+ struct queue_limits *limits = data;
+ struct block_device *bdev = dev->bdev;
struct request_queue *q = bdev_get_queue(bdev);
- struct io_restrictions *rs = &ti->limits;
char b[BDEVNAME_SIZE];
if (unlikely(!q)) {
DMWARN("%s: Cannot set limits for nonexistent device %s",
dm_device_name(ti->table->md), bdevname(bdev, b));
- return;
+ return 0;
}
- /*
- * Combine the device limits low.
- *
- * FIXME: if we move an io_restriction struct
- * into q this would just be a call to
- * combine_restrictions_low()
- */
- rs->max_sectors =
- min_not_zero(rs->max_sectors, queue_max_sectors(q));
+ if (blk_stack_limits(limits, &q->limits, start) < 0)
+ DMWARN("%s: target device %s is misaligned",
+ dm_device_name(ti->table->md), bdevname(bdev, b));
/*
* Check if merge fn is supported.
@@ -519,48 +506,21 @@
*/
if (q->merge_bvec_fn && !ti->type->merge)
- rs->max_sectors =
- min_not_zero(rs->max_sectors,
+ limits->max_sectors =
+ min_not_zero(limits->max_sectors,
(unsigned int) (PAGE_SIZE >> 9));
-
- rs->max_phys_segments =
- min_not_zero(rs->max_phys_segments,
- queue_max_phys_segments(q));
-
- rs->max_hw_segments =
- min_not_zero(rs->max_hw_segments, queue_max_hw_segments(q));
-
- rs->logical_block_size = max(rs->logical_block_size,
- queue_logical_block_size(q));
-
- rs->max_segment_size =
- min_not_zero(rs->max_segment_size, queue_max_segment_size(q));
-
- rs->max_hw_sectors =
- min_not_zero(rs->max_hw_sectors, queue_max_hw_sectors(q));
-
- rs->seg_boundary_mask =
- min_not_zero(rs->seg_boundary_mask,
- queue_segment_boundary(q));
-
- rs->bounce_pfn = min_not_zero(rs->bounce_pfn, queue_bounce_pfn(q));
-
- rs->no_cluster |= !test_bit(QUEUE_FLAG_CLUSTER, &q->queue_flags);
+ return 0;
}
EXPORT_SYMBOL_GPL(dm_set_device_limits);
int dm_get_device(struct dm_target *ti, const char *path, sector_t start,
sector_t len, fmode_t mode, struct dm_dev **result)
{
- int r = __table_get_device(ti->table, ti, path,
- start, len, mode, result);
-
- if (!r)
- dm_set_device_limits(ti, (*result)->bdev);
-
- return r;
+ return __table_get_device(ti->table, ti, path,
+ start, len, mode, result);
}
+
/*
* Decrement a devices use count and remove it if necessary.
*/
@@ -675,24 +635,78 @@
return 0;
}
-static void check_for_valid_limits(struct io_restrictions *rs)
+/*
+ * Impose necessary and sufficient conditions on a devices's table such
+ * that any incoming bio which respects its logical_block_size can be
+ * processed successfully. If it falls across the boundary between
+ * two or more targets, the size of each piece it gets split into must
+ * be compatible with the logical_block_size of the target processing it.
+ */
+static int validate_hardware_logical_block_alignment(struct dm_table *table,
+ struct queue_limits *limits)
{
- if (!rs->max_sectors)
- rs->max_sectors = SAFE_MAX_SECTORS;
- if (!rs->max_hw_sectors)
- rs->max_hw_sectors = SAFE_MAX_SECTORS;
- if (!rs->max_phys_segments)
- rs->max_phys_segments = MAX_PHYS_SEGMENTS;
- if (!rs->max_hw_segments)
- rs->max_hw_segments = MAX_HW_SEGMENTS;
- if (!rs->logical_block_size)
- rs->logical_block_size = 1 << SECTOR_SHIFT;
- if (!rs->max_segment_size)
- rs->max_segment_size = MAX_SEGMENT_SIZE;
- if (!rs->seg_boundary_mask)
- rs->seg_boundary_mask = BLK_SEG_BOUNDARY_MASK;
- if (!rs->bounce_pfn)
- rs->bounce_pfn = -1;
+ /*
+ * This function uses arithmetic modulo the logical_block_size
+ * (in units of 512-byte sectors).
+ */
+ unsigned short device_logical_block_size_sects =
+ limits->logical_block_size >> SECTOR_SHIFT;
+
+ /*
+ * Offset of the start of the next table entry, mod logical_block_size.
+ */
+ unsigned short next_target_start = 0;
+
+ /*
+ * Given an aligned bio that extends beyond the end of a
+ * target, how many sectors must the next target handle?
+ */
+ unsigned short remaining = 0;
+
+ struct dm_target *uninitialized_var(ti);
+ struct queue_limits ti_limits;
+ unsigned i = 0;
+
+ /*
+ * Check each entry in the table in turn.
+ */
+ while (i < dm_table_get_num_targets(table)) {
+ ti = dm_table_get_target(table, i++);
+
+ blk_set_default_limits(&ti_limits);
+
+ /* combine all target devices' limits */
+ if (ti->type->iterate_devices)
+ ti->type->iterate_devices(ti, dm_set_device_limits,
+ &ti_limits);
+
+ /*
+ * If the remaining sectors fall entirely within this
+ * table entry are they compatible with its logical_block_size?
+ */
+ if (remaining < ti->len &&
+ remaining & ((ti_limits.logical_block_size >>
+ SECTOR_SHIFT) - 1))
+ break; /* Error */
+
+ next_target_start =
+ (unsigned short) ((next_target_start + ti->len) &
+ (device_logical_block_size_sects - 1));
+ remaining = next_target_start ?
+ device_logical_block_size_sects - next_target_start : 0;
+ }
+
+ if (remaining) {
+ DMWARN("%s: table line %u (start sect %llu len %llu) "
+ "not aligned to h/w logical block size %hu",
+ dm_device_name(table->md), i,
+ (unsigned long long) ti->begin,
+ (unsigned long long) ti->len,
+ limits->logical_block_size);
+ return -EINVAL;
+ }
+
+ return 0;
}
int dm_table_add_target(struct dm_table *t, const char *type,
@@ -747,9 +761,6 @@
t->highs[t->num_targets++] = tgt->begin + tgt->len - 1;
- /* FIXME: the plan is to combine high here and then have
- * the merge fn apply the target level restrictions. */
- combine_restrictions_low(&t->limits, &tgt->limits);
return 0;
bad:
@@ -758,6 +769,104 @@
return r;
}
+int dm_table_set_type(struct dm_table *t)
+{
+ unsigned i;
+ unsigned bio_based = 0, request_based = 0;
+ struct dm_target *tgt;
+ struct dm_dev_internal *dd;
+ struct list_head *devices;
+
+ for (i = 0; i < t->num_targets; i++) {
+ tgt = t->targets + i;
+ if (dm_target_request_based(tgt))
+ request_based = 1;
+ else
+ bio_based = 1;
+
+ if (bio_based && request_based) {
+ DMWARN("Inconsistent table: different target types"
+ " can't be mixed up");
+ return -EINVAL;
+ }
+ }
+
+ if (bio_based) {
+ /* We must use this table as bio-based */
+ t->type = DM_TYPE_BIO_BASED;
+ return 0;
+ }
+
+ BUG_ON(!request_based); /* No targets in this table */
+
+ /* Non-request-stackable devices can't be used for request-based dm */
+ devices = dm_table_get_devices(t);
+ list_for_each_entry(dd, devices, list) {
+ if (!blk_queue_stackable(bdev_get_queue(dd->dm_dev.bdev))) {
+ DMWARN("table load rejected: including"
+ " non-request-stackable devices");
+ return -EINVAL;
+ }
+ }
+
+ /*
+ * Request-based dm supports only tables that have a single target now.
+ * To support multiple targets, request splitting support is needed,
+ * and that needs lots of changes in the block-layer.
+ * (e.g. request completion process for partial completion.)
+ */
+ if (t->num_targets > 1) {
+ DMWARN("Request-based dm doesn't support multiple targets yet");
+ return -EINVAL;
+ }
+
+ t->type = DM_TYPE_REQUEST_BASED;
+
+ return 0;
+}
+
+unsigned dm_table_get_type(struct dm_table *t)
+{
+ return t->type;
+}
+
+bool dm_table_bio_based(struct dm_table *t)
+{
+ return dm_table_get_type(t) == DM_TYPE_BIO_BASED;
+}
+
+bool dm_table_request_based(struct dm_table *t)
+{
+ return dm_table_get_type(t) == DM_TYPE_REQUEST_BASED;
+}
+
+int dm_table_alloc_md_mempools(struct dm_table *t)
+{
+ unsigned type = dm_table_get_type(t);
+
+ if (unlikely(type == DM_TYPE_NONE)) {
+ DMWARN("no table type is set, can't allocate mempools");
+ return -EINVAL;
+ }
+
+ t->mempools = dm_alloc_md_mempools(type);
+ if (!t->mempools)
+ return -ENOMEM;
+
+ return 0;
+}
+
+void dm_table_free_md_mempools(struct dm_table *t)
+{
+ dm_free_md_mempools(t->mempools);
+ t->mempools = NULL;
+}
+
+struct dm_md_mempools *dm_table_get_md_mempools(struct dm_table *t)
+{
+ return t->mempools;
+}
+
static int setup_indexes(struct dm_table *t)
{
int i;
@@ -792,8 +901,6 @@
int r = 0;
unsigned int leaf_nodes;
- check_for_valid_limits(&t->limits);
-
/* how many indexes will the btree have ? */
leaf_nodes = dm_div_up(t->num_targets, KEYS_PER_NODE);
t->depth = 1 + int_log(leaf_nodes, CHILDREN_PER_NODE);
@@ -869,6 +976,57 @@
}
/*
+ * Establish the new table's queue_limits and validate them.
+ */
+int dm_calculate_queue_limits(struct dm_table *table,
+ struct queue_limits *limits)
+{
+ struct dm_target *uninitialized_var(ti);
+ struct queue_limits ti_limits;
+ unsigned i = 0;
+
+ blk_set_default_limits(limits);
+
+ while (i < dm_table_get_num_targets(table)) {
+ blk_set_default_limits(&ti_limits);
+
+ ti = dm_table_get_target(table, i++);
+
+ if (!ti->type->iterate_devices)
+ goto combine_limits;
+
+ /*
+ * Combine queue limits of all the devices this target uses.
+ */
+ ti->type->iterate_devices(ti, dm_set_device_limits,
+ &ti_limits);
+
+ /*
+ * Check each device area is consistent with the target's
+ * overall queue limits.
+ */
+ if (!ti->type->iterate_devices(ti, device_area_is_valid,
+ &ti_limits))
+ return -EINVAL;
+
+combine_limits:
+ /*
+ * Merge this target's queue limits into the overall limits
+ * for the table.
+ */
+ if (blk_stack_limits(limits, &ti_limits, 0) < 0)
+ DMWARN("%s: target device "
+ "(start sect %llu len %llu) "
+ "is misaligned",
+ dm_device_name(table->md),
+ (unsigned long long) ti->begin,
+ (unsigned long long) ti->len);
+ }
+
+ return validate_hardware_logical_block_alignment(table, limits);
+}
+
+/*
* Set the integrity profile for this device if all devices used have
* matching profiles.
*/
@@ -907,27 +1065,42 @@
return;
}
-void dm_table_set_restrictions(struct dm_table *t, struct request_queue *q)
+void dm_table_set_restrictions(struct dm_table *t, struct request_queue *q,
+ struct queue_limits *limits)
{
/*
- * Make sure we obey the optimistic sub devices
- * restrictions.
+ * Each target device in the table has a data area that should normally
+ * be aligned such that the DM device's alignment_offset is 0.
+ * FIXME: Propagate alignment_offsets up the stack and warn of
+ * sub-optimal or inconsistent settings.
*/
- blk_queue_max_sectors(q, t->limits.max_sectors);
- blk_queue_max_phys_segments(q, t->limits.max_phys_segments);
- blk_queue_max_hw_segments(q, t->limits.max_hw_segments);
- blk_queue_logical_block_size(q, t->limits.logical_block_size);
- blk_queue_max_segment_size(q, t->limits.max_segment_size);
- blk_queue_max_hw_sectors(q, t->limits.max_hw_sectors);
- blk_queue_segment_boundary(q, t->limits.seg_boundary_mask);
- blk_queue_bounce_limit(q, t->limits.bounce_pfn);
+ limits->alignment_offset = 0;
+ limits->misaligned = 0;
- if (t->limits.no_cluster)
+ /*
+ * Copy table's limits to the DM device's request_queue
+ */
+ q->limits = *limits;
+
+ if (limits->no_cluster)
queue_flag_clear_unlocked(QUEUE_FLAG_CLUSTER, q);
else
queue_flag_set_unlocked(QUEUE_FLAG_CLUSTER, q);
dm_table_set_integrity(t);
+
+ /*
+ * QUEUE_FLAG_STACKABLE must be set after all queue settings are
+ * visible to other CPUs because, once the flag is set, incoming bios
+ * are processed by request-based dm, which refers to the queue
+ * settings.
+ * Until the flag set, bios are passed to bio-based dm and queued to
+ * md->deferred where queue settings are not needed yet.
+ * Those bios are passed to request-based dm at the resume time.
+ */
+ smp_mb();
+ if (dm_table_request_based(t))
+ queue_flag_set_unlocked(QUEUE_FLAG_STACKABLE, q);
}
unsigned int dm_table_get_num_targets(struct dm_table *t)
@@ -1023,6 +1196,20 @@
return r;
}
+int dm_table_any_busy_target(struct dm_table *t)
+{
+ unsigned i;
+ struct dm_target *ti;
+
+ for (i = 0; i < t->num_targets; i++) {
+ ti = t->targets + i;
+ if (ti->type->busy && ti->type->busy(ti))
+ return 1;
+ }
+
+ return 0;
+}
+
void dm_table_unplug_all(struct dm_table *t)
{
struct dm_dev_internal *dd;
diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index 48db308..3c6d4ee 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -24,6 +24,13 @@
#define DM_MSG_PREFIX "core"
+/*
+ * Cookies are numeric values sent with CHANGE and REMOVE
+ * uevents while resuming, removing or renaming the device.
+ */
+#define DM_COOKIE_ENV_VAR_NAME "DM_COOKIE"
+#define DM_COOKIE_LENGTH 24
+
static const char *_name = DM_NAME;
static unsigned int major = 0;
@@ -71,7 +78,7 @@
*/
struct dm_rq_clone_bio_info {
struct bio *orig;
- struct request *rq;
+ struct dm_rq_target_io *tio;
};
union map_info *dm_get_mapinfo(struct bio *bio)
@@ -81,6 +88,14 @@
return NULL;
}
+union map_info *dm_get_rq_mapinfo(struct request *rq)
+{
+ if (rq && rq->end_io_data)
+ return &((struct dm_rq_target_io *)rq->end_io_data)->info;
+ return NULL;
+}
+EXPORT_SYMBOL_GPL(dm_get_rq_mapinfo);
+
#define MINOR_ALLOCED ((void *)-1)
/*
@@ -157,13 +172,31 @@
* freeze/thaw support require holding onto a super block
*/
struct super_block *frozen_sb;
- struct block_device *suspended_bdev;
+ struct block_device *bdev;
/* forced geometry settings */
struct hd_geometry geometry;
+ /* marker of flush suspend for request-based dm */
+ struct request suspend_rq;
+
+ /* For saving the address of __make_request for request based dm */
+ make_request_fn *saved_make_request_fn;
+
/* sysfs handle */
struct kobject kobj;
+
+ /* zero-length barrier that will be cloned and submitted to targets */
+ struct bio barrier_bio;
+};
+
+/*
+ * For mempools pre-allocation at the table loading time.
+ */
+struct dm_md_mempools {
+ mempool_t *io_pool;
+ mempool_t *tio_pool;
+ struct bio_set *bs;
};
#define MIN_IOS 256
@@ -391,16 +424,31 @@
mempool_free(io, md->io_pool);
}
-static struct dm_target_io *alloc_tio(struct mapped_device *md)
-{
- return mempool_alloc(md->tio_pool, GFP_NOIO);
-}
-
static void free_tio(struct mapped_device *md, struct dm_target_io *tio)
{
mempool_free(tio, md->tio_pool);
}
+static struct dm_rq_target_io *alloc_rq_tio(struct mapped_device *md)
+{
+ return mempool_alloc(md->tio_pool, GFP_ATOMIC);
+}
+
+static void free_rq_tio(struct dm_rq_target_io *tio)
+{
+ mempool_free(tio, tio->md->tio_pool);
+}
+
+static struct dm_rq_clone_bio_info *alloc_bio_info(struct mapped_device *md)
+{
+ return mempool_alloc(md->io_pool, GFP_ATOMIC);
+}
+
+static void free_bio_info(struct dm_rq_clone_bio_info *info)
+{
+ mempool_free(info, info->tio->md->io_pool);
+}
+
static void start_io_acct(struct dm_io *io)
{
struct mapped_device *md = io->md;
@@ -464,12 +512,13 @@
struct dm_table *dm_get_table(struct mapped_device *md)
{
struct dm_table *t;
+ unsigned long flags;
- read_lock(&md->map_lock);
+ read_lock_irqsave(&md->map_lock, flags);
t = md->map;
if (t)
dm_table_get(t);
- read_unlock(&md->map_lock);
+ read_unlock_irqrestore(&md->map_lock, flags);
return t;
}
@@ -536,9 +585,11 @@
* Target requested pushing back the I/O.
*/
spin_lock_irqsave(&md->deferred_lock, flags);
- if (__noflush_suspending(md))
- bio_list_add_head(&md->deferred, io->bio);
- else
+ if (__noflush_suspending(md)) {
+ if (!bio_barrier(io->bio))
+ bio_list_add_head(&md->deferred,
+ io->bio);
+ } else
/* noflush suspend was interrupted. */
io->error = -EIO;
spin_unlock_irqrestore(&md->deferred_lock, flags);
@@ -553,7 +604,8 @@
* a per-device variable for error reporting.
* Note that you can't touch the bio after end_io_acct
*/
- md->barrier_error = io_error;
+ if (!md->barrier_error && io_error != -EOPNOTSUPP)
+ md->barrier_error = io_error;
end_io_acct(io);
} else {
end_io_acct(io);
@@ -607,6 +659,262 @@
dec_pending(io, error);
}
+/*
+ * Partial completion handling for request-based dm
+ */
+static void end_clone_bio(struct bio *clone, int error)
+{
+ struct dm_rq_clone_bio_info *info = clone->bi_private;
+ struct dm_rq_target_io *tio = info->tio;
+ struct bio *bio = info->orig;
+ unsigned int nr_bytes = info->orig->bi_size;
+
+ bio_put(clone);
+
+ if (tio->error)
+ /*
+ * An error has already been detected on the request.
+ * Once error occurred, just let clone->end_io() handle
+ * the remainder.
+ */
+ return;
+ else if (error) {
+ /*
+ * Don't notice the error to the upper layer yet.
+ * The error handling decision is made by the target driver,
+ * when the request is completed.
+ */
+ tio->error = error;
+ return;
+ }
+
+ /*
+ * I/O for the bio successfully completed.
+ * Notice the data completion to the upper layer.
+ */
+
+ /*
+ * bios are processed from the head of the list.
+ * So the completing bio should always be rq->bio.
+ * If it's not, something wrong is happening.
+ */
+ if (tio->orig->bio != bio)
+ DMERR("bio completion is going in the middle of the request");
+
+ /*
+ * Update the original request.
+ * Do not use blk_end_request() here, because it may complete
+ * the original request before the clone, and break the ordering.
+ */
+ blk_update_request(tio->orig, 0, nr_bytes);
+}
+
+/*
+ * Don't touch any member of the md after calling this function because
+ * the md may be freed in dm_put() at the end of this function.
+ * Or do dm_get() before calling this function and dm_put() later.
+ */
+static void rq_completed(struct mapped_device *md, int run_queue)
+{
+ int wakeup_waiters = 0;
+ struct request_queue *q = md->queue;
+ unsigned long flags;
+
+ spin_lock_irqsave(q->queue_lock, flags);
+ if (!queue_in_flight(q))
+ wakeup_waiters = 1;
+ spin_unlock_irqrestore(q->queue_lock, flags);
+
+ /* nudge anyone waiting on suspend queue */
+ if (wakeup_waiters)
+ wake_up(&md->wait);
+
+ if (run_queue)
+ blk_run_queue(q);
+
+ /*
+ * dm_put() must be at the end of this function. See the comment above
+ */
+ dm_put(md);
+}
+
+static void dm_unprep_request(struct request *rq)
+{
+ struct request *clone = rq->special;
+ struct dm_rq_target_io *tio = clone->end_io_data;
+
+ rq->special = NULL;
+ rq->cmd_flags &= ~REQ_DONTPREP;
+
+ blk_rq_unprep_clone(clone);
+ free_rq_tio(tio);
+}
+
+/*
+ * Requeue the original request of a clone.
+ */
+void dm_requeue_unmapped_request(struct request *clone)
+{
+ struct dm_rq_target_io *tio = clone->end_io_data;
+ struct mapped_device *md = tio->md;
+ struct request *rq = tio->orig;
+ struct request_queue *q = rq->q;
+ unsigned long flags;
+
+ dm_unprep_request(rq);
+
+ spin_lock_irqsave(q->queue_lock, flags);
+ if (elv_queue_empty(q))
+ blk_plug_device(q);
+ blk_requeue_request(q, rq);
+ spin_unlock_irqrestore(q->queue_lock, flags);
+
+ rq_completed(md, 0);
+}
+EXPORT_SYMBOL_GPL(dm_requeue_unmapped_request);
+
+static void __stop_queue(struct request_queue *q)
+{
+ blk_stop_queue(q);
+}
+
+static void stop_queue(struct request_queue *q)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(q->queue_lock, flags);
+ __stop_queue(q);
+ spin_unlock_irqrestore(q->queue_lock, flags);
+}
+
+static void __start_queue(struct request_queue *q)
+{
+ if (blk_queue_stopped(q))
+ blk_start_queue(q);
+}
+
+static void start_queue(struct request_queue *q)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(q->queue_lock, flags);
+ __start_queue(q);
+ spin_unlock_irqrestore(q->queue_lock, flags);
+}
+
+/*
+ * Complete the clone and the original request.
+ * Must be called without queue lock.
+ */
+static void dm_end_request(struct request *clone, int error)
+{
+ struct dm_rq_target_io *tio = clone->end_io_data;
+ struct mapped_device *md = tio->md;
+ struct request *rq = tio->orig;
+
+ if (blk_pc_request(rq)) {
+ rq->errors = clone->errors;
+ rq->resid_len = clone->resid_len;
+
+ if (rq->sense)
+ /*
+ * We are using the sense buffer of the original
+ * request.
+ * So setting the length of the sense data is enough.
+ */
+ rq->sense_len = clone->sense_len;
+ }
+
+ BUG_ON(clone->bio);
+ free_rq_tio(tio);
+
+ blk_end_request_all(rq, error);
+
+ rq_completed(md, 1);
+}
+
+/*
+ * Request completion handler for request-based dm
+ */
+static void dm_softirq_done(struct request *rq)
+{
+ struct request *clone = rq->completion_data;
+ struct dm_rq_target_io *tio = clone->end_io_data;
+ dm_request_endio_fn rq_end_io = tio->ti->type->rq_end_io;
+ int error = tio->error;
+
+ if (!(rq->cmd_flags & REQ_FAILED) && rq_end_io)
+ error = rq_end_io(tio->ti, clone, error, &tio->info);
+
+ if (error <= 0)
+ /* The target wants to complete the I/O */
+ dm_end_request(clone, error);
+ else if (error == DM_ENDIO_INCOMPLETE)
+ /* The target will handle the I/O */
+ return;
+ else if (error == DM_ENDIO_REQUEUE)
+ /* The target wants to requeue the I/O */
+ dm_requeue_unmapped_request(clone);
+ else {
+ DMWARN("unimplemented target endio return value: %d", error);
+ BUG();
+ }
+}
+
+/*
+ * Complete the clone and the original request with the error status
+ * through softirq context.
+ */
+static void dm_complete_request(struct request *clone, int error)
+{
+ struct dm_rq_target_io *tio = clone->end_io_data;
+ struct request *rq = tio->orig;
+
+ tio->error = error;
+ rq->completion_data = clone;
+ blk_complete_request(rq);
+}
+
+/*
+ * Complete the not-mapped clone and the original request with the error status
+ * through softirq context.
+ * Target's rq_end_io() function isn't called.
+ * This may be used when the target's map_rq() function fails.
+ */
+void dm_kill_unmapped_request(struct request *clone, int error)
+{
+ struct dm_rq_target_io *tio = clone->end_io_data;
+ struct request *rq = tio->orig;
+
+ rq->cmd_flags |= REQ_FAILED;
+ dm_complete_request(clone, error);
+}
+EXPORT_SYMBOL_GPL(dm_kill_unmapped_request);
+
+/*
+ * Called with the queue lock held
+ */
+static void end_clone_request(struct request *clone, int error)
+{
+ /*
+ * For just cleaning up the information of the queue in which
+ * the clone was dispatched.
+ * The clone is *NOT* freed actually here because it is alloced from
+ * dm own mempool and REQ_ALLOCED isn't set in clone->cmd_flags.
+ */
+ __blk_put_request(clone->q, clone);
+
+ /*
+ * Actual request completion is done in a softirq context which doesn't
+ * hold the queue lock. Otherwise, deadlock could occur because:
+ * - another request may be submitted by the upper level driver
+ * of the stacking during the completion
+ * - the submission which requires queue lock may be done
+ * against this queue
+ */
+ dm_complete_request(clone, error);
+}
+
static sector_t max_io_len(struct mapped_device *md,
sector_t sector, struct dm_target *ti)
{
@@ -634,11 +942,6 @@
sector_t sector;
struct mapped_device *md;
- /*
- * Sanity checks.
- */
- BUG_ON(!clone->bi_size);
-
clone->bi_end_io = clone_endio;
clone->bi_private = tio;
@@ -752,6 +1055,48 @@
return clone;
}
+static struct dm_target_io *alloc_tio(struct clone_info *ci,
+ struct dm_target *ti)
+{
+ struct dm_target_io *tio = mempool_alloc(ci->md->tio_pool, GFP_NOIO);
+
+ tio->io = ci->io;
+ tio->ti = ti;
+ memset(&tio->info, 0, sizeof(tio->info));
+
+ return tio;
+}
+
+static void __flush_target(struct clone_info *ci, struct dm_target *ti,
+ unsigned flush_nr)
+{
+ struct dm_target_io *tio = alloc_tio(ci, ti);
+ struct bio *clone;
+
+ tio->info.flush_request = flush_nr;
+
+ clone = bio_alloc_bioset(GFP_NOIO, 0, ci->md->bs);
+ __bio_clone(clone, ci->bio);
+ clone->bi_destructor = dm_bio_destructor;
+
+ __map_bio(ti, clone, tio);
+}
+
+static int __clone_and_map_empty_barrier(struct clone_info *ci)
+{
+ unsigned target_nr = 0, flush_nr;
+ struct dm_target *ti;
+
+ while ((ti = dm_table_get_target(ci->map, target_nr++)))
+ for (flush_nr = 0; flush_nr < ti->num_flush_requests;
+ flush_nr++)
+ __flush_target(ci, ti, flush_nr);
+
+ ci->sector_count = 0;
+
+ return 0;
+}
+
static int __clone_and_map(struct clone_info *ci)
{
struct bio *clone, *bio = ci->bio;
@@ -759,6 +1104,9 @@
sector_t len = 0, max;
struct dm_target_io *tio;
+ if (unlikely(bio_empty_barrier(bio)))
+ return __clone_and_map_empty_barrier(ci);
+
ti = dm_table_find_target(ci->map, ci->sector);
if (!dm_target_is_valid(ti))
return -EIO;
@@ -768,10 +1116,7 @@
/*
* Allocate a target io object.
*/
- tio = alloc_tio(ci->md);
- tio->io = ci->io;
- tio->ti = ti;
- memset(&tio->info, 0, sizeof(tio->info));
+ tio = alloc_tio(ci, ti);
if (ci->sector_count <= max) {
/*
@@ -827,10 +1172,7 @@
max = max_io_len(ci->md, ci->sector, ti);
- tio = alloc_tio(ci->md);
- tio->io = ci->io;
- tio->ti = ti;
- memset(&tio->info, 0, sizeof(tio->info));
+ tio = alloc_tio(ci, ti);
}
len = min(remaining, max);
@@ -865,7 +1207,8 @@
if (!bio_barrier(bio))
bio_io_error(bio);
else
- md->barrier_error = -EIO;
+ if (!md->barrier_error)
+ md->barrier_error = -EIO;
return;
}
@@ -878,6 +1221,8 @@
ci.io->md = md;
ci.sector = bio->bi_sector;
ci.sector_count = bio_sectors(bio);
+ if (unlikely(bio_empty_barrier(bio)))
+ ci.sector_count = 1;
ci.idx = bio->bi_idx;
start_io_acct(ci.io);
@@ -925,6 +1270,16 @@
*/
if (max_size && ti->type->merge)
max_size = ti->type->merge(ti, bvm, biovec, max_size);
+ /*
+ * If the target doesn't support merge method and some of the devices
+ * provided their merge_bvec method (we know this by looking at
+ * queue_max_hw_sectors), then we can't allow bios with multiple vector
+ * entries. So always set max_size to 0, and the code below allows
+ * just one page.
+ */
+ else if (queue_max_hw_sectors(q) <= PAGE_SIZE >> 9)
+
+ max_size = 0;
out_table:
dm_table_put(map);
@@ -943,7 +1298,7 @@
* The request function that just remaps the bio built up by
* dm_merge_bvec.
*/
-static int dm_request(struct request_queue *q, struct bio *bio)
+static int _dm_request(struct request_queue *q, struct bio *bio)
{
int rw = bio_data_dir(bio);
struct mapped_device *md = q->queuedata;
@@ -980,12 +1335,274 @@
return 0;
}
+static int dm_make_request(struct request_queue *q, struct bio *bio)
+{
+ struct mapped_device *md = q->queuedata;
+
+ if (unlikely(bio_barrier(bio))) {
+ bio_endio(bio, -EOPNOTSUPP);
+ return 0;
+ }
+
+ return md->saved_make_request_fn(q, bio); /* call __make_request() */
+}
+
+static int dm_request_based(struct mapped_device *md)
+{
+ return blk_queue_stackable(md->queue);
+}
+
+static int dm_request(struct request_queue *q, struct bio *bio)
+{
+ struct mapped_device *md = q->queuedata;
+
+ if (dm_request_based(md))
+ return dm_make_request(q, bio);
+
+ return _dm_request(q, bio);
+}
+
+void dm_dispatch_request(struct request *rq)
+{
+ int r;
+
+ if (blk_queue_io_stat(rq->q))
+ rq->cmd_flags |= REQ_IO_STAT;
+
+ rq->start_time = jiffies;
+ r = blk_insert_cloned_request(rq->q, rq);
+ if (r)
+ dm_complete_request(rq, r);
+}
+EXPORT_SYMBOL_GPL(dm_dispatch_request);
+
+static void dm_rq_bio_destructor(struct bio *bio)
+{
+ struct dm_rq_clone_bio_info *info = bio->bi_private;
+ struct mapped_device *md = info->tio->md;
+
+ free_bio_info(info);
+ bio_free(bio, md->bs);
+}
+
+static int dm_rq_bio_constructor(struct bio *bio, struct bio *bio_orig,
+ void *data)
+{
+ struct dm_rq_target_io *tio = data;
+ struct mapped_device *md = tio->md;
+ struct dm_rq_clone_bio_info *info = alloc_bio_info(md);
+
+ if (!info)
+ return -ENOMEM;
+
+ info->orig = bio_orig;
+ info->tio = tio;
+ bio->bi_end_io = end_clone_bio;
+ bio->bi_private = info;
+ bio->bi_destructor = dm_rq_bio_destructor;
+
+ return 0;
+}
+
+static int setup_clone(struct request *clone, struct request *rq,
+ struct dm_rq_target_io *tio)
+{
+ int r = blk_rq_prep_clone(clone, rq, tio->md->bs, GFP_ATOMIC,
+ dm_rq_bio_constructor, tio);
+
+ if (r)
+ return r;
+
+ clone->cmd = rq->cmd;
+ clone->cmd_len = rq->cmd_len;
+ clone->sense = rq->sense;
+ clone->buffer = rq->buffer;
+ clone->end_io = end_clone_request;
+ clone->end_io_data = tio;
+
+ return 0;
+}
+
+static int dm_rq_flush_suspending(struct mapped_device *md)
+{
+ return !md->suspend_rq.special;
+}
+
+/*
+ * Called with the queue lock held.
+ */
+static int dm_prep_fn(struct request_queue *q, struct request *rq)
+{
+ struct mapped_device *md = q->queuedata;
+ struct dm_rq_target_io *tio;
+ struct request *clone;
+
+ if (unlikely(rq == &md->suspend_rq)) {
+ if (dm_rq_flush_suspending(md))
+ return BLKPREP_OK;
+ else
+ /* The flush suspend was interrupted */
+ return BLKPREP_KILL;
+ }
+
+ if (unlikely(rq->special)) {
+ DMWARN("Already has something in rq->special.");
+ return BLKPREP_KILL;
+ }
+
+ tio = alloc_rq_tio(md); /* Only one for each original request */
+ if (!tio)
+ /* -ENOMEM */
+ return BLKPREP_DEFER;
+
+ tio->md = md;
+ tio->ti = NULL;
+ tio->orig = rq;
+ tio->error = 0;
+ memset(&tio->info, 0, sizeof(tio->info));
+
+ clone = &tio->clone;
+ if (setup_clone(clone, rq, tio)) {
+ /* -ENOMEM */
+ free_rq_tio(tio);
+ return BLKPREP_DEFER;
+ }
+
+ rq->special = clone;
+ rq->cmd_flags |= REQ_DONTPREP;
+
+ return BLKPREP_OK;
+}
+
+static void map_request(struct dm_target *ti, struct request *rq,
+ struct mapped_device *md)
+{
+ int r;
+ struct request *clone = rq->special;
+ struct dm_rq_target_io *tio = clone->end_io_data;
+
+ /*
+ * Hold the md reference here for the in-flight I/O.
+ * We can't rely on the reference count by device opener,
+ * because the device may be closed during the request completion
+ * when all bios are completed.
+ * See the comment in rq_completed() too.
+ */
+ dm_get(md);
+
+ tio->ti = ti;
+ r = ti->type->map_rq(ti, clone, &tio->info);
+ switch (r) {
+ case DM_MAPIO_SUBMITTED:
+ /* The target has taken the I/O to submit by itself later */
+ break;
+ case DM_MAPIO_REMAPPED:
+ /* The target has remapped the I/O so dispatch it */
+ dm_dispatch_request(clone);
+ break;
+ case DM_MAPIO_REQUEUE:
+ /* The target wants to requeue the I/O */
+ dm_requeue_unmapped_request(clone);
+ break;
+ default:
+ if (r > 0) {
+ DMWARN("unimplemented target map return value: %d", r);
+ BUG();
+ }
+
+ /* The target wants to complete the I/O */
+ dm_kill_unmapped_request(clone, r);
+ break;
+ }
+}
+
+/*
+ * q->request_fn for request-based dm.
+ * Called with the queue lock held.
+ */
+static void dm_request_fn(struct request_queue *q)
+{
+ struct mapped_device *md = q->queuedata;
+ struct dm_table *map = dm_get_table(md);
+ struct dm_target *ti;
+ struct request *rq;
+
+ /*
+ * For noflush suspend, check blk_queue_stopped() to immediately
+ * quit I/O dispatching.
+ */
+ while (!blk_queue_plugged(q) && !blk_queue_stopped(q)) {
+ rq = blk_peek_request(q);
+ if (!rq)
+ goto plug_and_out;
+
+ if (unlikely(rq == &md->suspend_rq)) { /* Flush suspend maker */
+ if (queue_in_flight(q))
+ /* Not quiet yet. Wait more */
+ goto plug_and_out;
+
+ /* This device should be quiet now */
+ __stop_queue(q);
+ blk_start_request(rq);
+ __blk_end_request_all(rq, 0);
+ wake_up(&md->wait);
+ goto out;
+ }
+
+ ti = dm_table_find_target(map, blk_rq_pos(rq));
+ if (ti->type->busy && ti->type->busy(ti))
+ goto plug_and_out;
+
+ blk_start_request(rq);
+ spin_unlock(q->queue_lock);
+ map_request(ti, rq, md);
+ spin_lock_irq(q->queue_lock);
+ }
+
+ goto out;
+
+plug_and_out:
+ if (!elv_queue_empty(q))
+ /* Some requests still remain, retry later */
+ blk_plug_device(q);
+
+out:
+ dm_table_put(map);
+
+ return;
+}
+
+int dm_underlying_device_busy(struct request_queue *q)
+{
+ return blk_lld_busy(q);
+}
+EXPORT_SYMBOL_GPL(dm_underlying_device_busy);
+
+static int dm_lld_busy(struct request_queue *q)
+{
+ int r;
+ struct mapped_device *md = q->queuedata;
+ struct dm_table *map = dm_get_table(md);
+
+ if (!map || test_bit(DMF_BLOCK_IO_FOR_SUSPEND, &md->flags))
+ r = 1;
+ else
+ r = dm_table_any_busy_target(map);
+
+ dm_table_put(map);
+
+ return r;
+}
+
static void dm_unplug_all(struct request_queue *q)
{
struct mapped_device *md = q->queuedata;
struct dm_table *map = dm_get_table(md);
if (map) {
+ if (dm_request_based(md))
+ generic_unplug_device(q);
+
dm_table_unplug_all(map);
dm_table_put(map);
}
@@ -1000,7 +1617,16 @@
if (!test_bit(DMF_BLOCK_IO_FOR_SUSPEND, &md->flags)) {
map = dm_get_table(md);
if (map) {
- r = dm_table_any_congested(map, bdi_bits);
+ /*
+ * Request-based dm cares about only own queue for
+ * the query about congestion status of request_queue
+ */
+ if (dm_request_based(md))
+ r = md->queue->backing_dev_info.state &
+ bdi_bits;
+ else
+ r = dm_table_any_congested(map, bdi_bits);
+
dm_table_put(map);
}
}
@@ -1123,30 +1749,32 @@
INIT_LIST_HEAD(&md->uevent_list);
spin_lock_init(&md->uevent_lock);
- md->queue = blk_alloc_queue(GFP_KERNEL);
+ md->queue = blk_init_queue(dm_request_fn, NULL);
if (!md->queue)
goto bad_queue;
+ /*
+ * Request-based dm devices cannot be stacked on top of bio-based dm
+ * devices. The type of this dm device has not been decided yet,
+ * although we initialized the queue using blk_init_queue().
+ * The type is decided at the first table loading time.
+ * To prevent problematic device stacking, clear the queue flag
+ * for request stacking support until then.
+ *
+ * This queue is new, so no concurrency on the queue_flags.
+ */
+ queue_flag_clear_unlocked(QUEUE_FLAG_STACKABLE, md->queue);
+ md->saved_make_request_fn = md->queue->make_request_fn;
md->queue->queuedata = md;
md->queue->backing_dev_info.congested_fn = dm_any_congested;
md->queue->backing_dev_info.congested_data = md;
blk_queue_make_request(md->queue, dm_request);
- blk_queue_ordered(md->queue, QUEUE_ORDERED_DRAIN, NULL);
blk_queue_bounce_limit(md->queue, BLK_BOUNCE_ANY);
md->queue->unplug_fn = dm_unplug_all;
blk_queue_merge_bvec(md->queue, dm_merge_bvec);
-
- md->io_pool = mempool_create_slab_pool(MIN_IOS, _io_cache);
- if (!md->io_pool)
- goto bad_io_pool;
-
- md->tio_pool = mempool_create_slab_pool(MIN_IOS, _tio_cache);
- if (!md->tio_pool)
- goto bad_tio_pool;
-
- md->bs = bioset_create(16, 0);
- if (!md->bs)
- goto bad_no_bioset;
+ blk_queue_softirq_done(md->queue, dm_softirq_done);
+ blk_queue_prep_rq(md->queue, dm_prep_fn);
+ blk_queue_lld_busy(md->queue, dm_lld_busy);
md->disk = alloc_disk(1);
if (!md->disk)
@@ -1170,6 +1798,10 @@
if (!md->wq)
goto bad_thread;
+ md->bdev = bdget_disk(md->disk, 0);
+ if (!md->bdev)
+ goto bad_bdev;
+
/* Populate the mapping, nobody knows we exist yet */
spin_lock(&_minor_lock);
old_md = idr_replace(&_minor_idr, md, minor);
@@ -1179,15 +1811,11 @@
return md;
+bad_bdev:
+ destroy_workqueue(md->wq);
bad_thread:
put_disk(md->disk);
bad_disk:
- bioset_free(md->bs);
-bad_no_bioset:
- mempool_destroy(md->tio_pool);
-bad_tio_pool:
- mempool_destroy(md->io_pool);
-bad_io_pool:
blk_cleanup_queue(md->queue);
bad_queue:
free_minor(minor);
@@ -1204,14 +1832,15 @@
{
int minor = MINOR(disk_devt(md->disk));
- if (md->suspended_bdev) {
- unlock_fs(md);
- bdput(md->suspended_bdev);
- }
+ unlock_fs(md);
+ bdput(md->bdev);
destroy_workqueue(md->wq);
- mempool_destroy(md->tio_pool);
- mempool_destroy(md->io_pool);
- bioset_free(md->bs);
+ if (md->tio_pool)
+ mempool_destroy(md->tio_pool);
+ if (md->io_pool)
+ mempool_destroy(md->io_pool);
+ if (md->bs)
+ bioset_free(md->bs);
blk_integrity_unregister(md->disk);
del_gendisk(md->disk);
free_minor(minor);
@@ -1226,6 +1855,29 @@
kfree(md);
}
+static void __bind_mempools(struct mapped_device *md, struct dm_table *t)
+{
+ struct dm_md_mempools *p;
+
+ if (md->io_pool && md->tio_pool && md->bs)
+ /* the md already has necessary mempools */
+ goto out;
+
+ p = dm_table_get_md_mempools(t);
+ BUG_ON(!p || md->io_pool || md->tio_pool || md->bs);
+
+ md->io_pool = p->io_pool;
+ p->io_pool = NULL;
+ md->tio_pool = p->tio_pool;
+ p->tio_pool = NULL;
+ md->bs = p->bs;
+ p->bs = NULL;
+
+out:
+ /* mempool bind completed, now no need any mempools in the table */
+ dm_table_free_md_mempools(t);
+}
+
/*
* Bind a table to the device.
*/
@@ -1249,15 +1901,17 @@
{
set_capacity(md->disk, size);
- mutex_lock(&md->suspended_bdev->bd_inode->i_mutex);
- i_size_write(md->suspended_bdev->bd_inode, (loff_t)size << SECTOR_SHIFT);
- mutex_unlock(&md->suspended_bdev->bd_inode->i_mutex);
+ mutex_lock(&md->bdev->bd_inode->i_mutex);
+ i_size_write(md->bdev->bd_inode, (loff_t)size << SECTOR_SHIFT);
+ mutex_unlock(&md->bdev->bd_inode->i_mutex);
}
-static int __bind(struct mapped_device *md, struct dm_table *t)
+static int __bind(struct mapped_device *md, struct dm_table *t,
+ struct queue_limits *limits)
{
struct request_queue *q = md->queue;
sector_t size;
+ unsigned long flags;
size = dm_table_get_size(t);
@@ -1267,8 +1921,7 @@
if (size != get_capacity(md->disk))
memset(&md->geometry, 0, sizeof(md->geometry));
- if (md->suspended_bdev)
- __set_size(md, size);
+ __set_size(md, size);
if (!size) {
dm_table_destroy(t);
@@ -1277,10 +1930,22 @@
dm_table_event_callback(t, event_callback, md);
- write_lock(&md->map_lock);
+ /*
+ * The queue hasn't been stopped yet, if the old table type wasn't
+ * for request-based during suspension. So stop it to prevent
+ * I/O mapping before resume.
+ * This must be done before setting the queue restrictions,
+ * because request-based dm may be run just after the setting.
+ */
+ if (dm_table_request_based(t) && !blk_queue_stopped(q))
+ stop_queue(q);
+
+ __bind_mempools(md, t);
+
+ write_lock_irqsave(&md->map_lock, flags);
md->map = t;
- dm_table_set_restrictions(t, q);
- write_unlock(&md->map_lock);
+ dm_table_set_restrictions(t, q, limits);
+ write_unlock_irqrestore(&md->map_lock, flags);
return 0;
}
@@ -1288,14 +1953,15 @@
static void __unbind(struct mapped_device *md)
{
struct dm_table *map = md->map;
+ unsigned long flags;
if (!map)
return;
dm_table_event_callback(map, NULL, NULL);
- write_lock(&md->map_lock);
+ write_lock_irqsave(&md->map_lock, flags);
md->map = NULL;
- write_unlock(&md->map_lock);
+ write_unlock_irqrestore(&md->map_lock, flags);
dm_table_destroy(map);
}
@@ -1399,6 +2065,8 @@
{
int r = 0;
DECLARE_WAITQUEUE(wait, current);
+ struct request_queue *q = md->queue;
+ unsigned long flags;
dm_unplug_all(md->queue);
@@ -1408,7 +2076,14 @@
set_current_state(interruptible);
smp_mb();
- if (!atomic_read(&md->pending))
+ if (dm_request_based(md)) {
+ spin_lock_irqsave(q->queue_lock, flags);
+ if (!queue_in_flight(q) && blk_queue_stopped(q)) {
+ spin_unlock_irqrestore(q->queue_lock, flags);
+ break;
+ }
+ spin_unlock_irqrestore(q->queue_lock, flags);
+ } else if (!atomic_read(&md->pending))
break;
if (interruptible == TASK_INTERRUPTIBLE &&
@@ -1426,34 +2101,36 @@
return r;
}
-static int dm_flush(struct mapped_device *md)
+static void dm_flush(struct mapped_device *md)
{
dm_wait_for_completion(md, TASK_UNINTERRUPTIBLE);
- return 0;
+
+ bio_init(&md->barrier_bio);
+ md->barrier_bio.bi_bdev = md->bdev;
+ md->barrier_bio.bi_rw = WRITE_BARRIER;
+ __split_and_process_bio(md, &md->barrier_bio);
+
+ dm_wait_for_completion(md, TASK_UNINTERRUPTIBLE);
}
static void process_barrier(struct mapped_device *md, struct bio *bio)
{
- int error = dm_flush(md);
+ md->barrier_error = 0;
- if (unlikely(error)) {
- bio_endio(bio, error);
- return;
+ dm_flush(md);
+
+ if (!bio_empty_barrier(bio)) {
+ __split_and_process_bio(md, bio);
+ dm_flush(md);
}
- if (bio_empty_barrier(bio)) {
- bio_endio(bio, 0);
- return;
- }
-
- __split_and_process_bio(md, bio);
-
- error = dm_flush(md);
-
- if (!error && md->barrier_error)
- error = md->barrier_error;
if (md->barrier_error != DM_ENDIO_REQUEUE)
- bio_endio(bio, error);
+ bio_endio(bio, md->barrier_error);
+ else {
+ spin_lock_irq(&md->deferred_lock);
+ bio_list_add_head(&md->deferred, bio);
+ spin_unlock_irq(&md->deferred_lock);
+ }
}
/*
@@ -1479,10 +2156,14 @@
up_write(&md->io_lock);
- if (bio_barrier(c))
- process_barrier(md, c);
- else
- __split_and_process_bio(md, c);
+ if (dm_request_based(md))
+ generic_make_request(c);
+ else {
+ if (bio_barrier(c))
+ process_barrier(md, c);
+ else
+ __split_and_process_bio(md, c);
+ }
down_write(&md->io_lock);
}
@@ -1502,6 +2183,7 @@
*/
int dm_swap_table(struct mapped_device *md, struct dm_table *table)
{
+ struct queue_limits limits;
int r = -EINVAL;
mutex_lock(&md->suspend_lock);
@@ -1510,19 +2192,96 @@
if (!dm_suspended(md))
goto out;
- /* without bdev, the device size cannot be changed */
- if (!md->suspended_bdev)
- if (get_capacity(md->disk) != dm_table_get_size(table))
- goto out;
+ r = dm_calculate_queue_limits(table, &limits);
+ if (r)
+ goto out;
+
+ /* cannot change the device type, once a table is bound */
+ if (md->map &&
+ (dm_table_get_type(md->map) != dm_table_get_type(table))) {
+ DMWARN("can't change the device type after a table is bound");
+ goto out;
+ }
+
+ /*
+ * It is enought that blk_queue_ordered() is called only once when
+ * the first bio-based table is bound.
+ *
+ * This setting should be moved to alloc_dev() when request-based dm
+ * supports barrier.
+ */
+ if (!md->map && dm_table_bio_based(table))
+ blk_queue_ordered(md->queue, QUEUE_ORDERED_DRAIN, NULL);
__unbind(md);
- r = __bind(md, table);
+ r = __bind(md, table, &limits);
out:
mutex_unlock(&md->suspend_lock);
return r;
}
+static void dm_rq_invalidate_suspend_marker(struct mapped_device *md)
+{
+ md->suspend_rq.special = (void *)0x1;
+}
+
+static void dm_rq_abort_suspend(struct mapped_device *md, int noflush)
+{
+ struct request_queue *q = md->queue;
+ unsigned long flags;
+
+ spin_lock_irqsave(q->queue_lock, flags);
+ if (!noflush)
+ dm_rq_invalidate_suspend_marker(md);
+ __start_queue(q);
+ spin_unlock_irqrestore(q->queue_lock, flags);
+}
+
+static void dm_rq_start_suspend(struct mapped_device *md, int noflush)
+{
+ struct request *rq = &md->suspend_rq;
+ struct request_queue *q = md->queue;
+
+ if (noflush)
+ stop_queue(q);
+ else {
+ blk_rq_init(q, rq);
+ blk_insert_request(q, rq, 0, NULL);
+ }
+}
+
+static int dm_rq_suspend_available(struct mapped_device *md, int noflush)
+{
+ int r = 1;
+ struct request *rq = &md->suspend_rq;
+ struct request_queue *q = md->queue;
+ unsigned long flags;
+
+ if (noflush)
+ return r;
+
+ /* The marker must be protected by queue lock if it is in use */
+ spin_lock_irqsave(q->queue_lock, flags);
+ if (unlikely(rq->ref_count)) {
+ /*
+ * This can happen, when the previous flush suspend was
+ * interrupted, the marker is still in the queue and
+ * this flush suspend has been invoked, because we don't
+ * remove the marker at the time of suspend interruption.
+ * We have only one marker per mapped_device, so we can't
+ * start another flush suspend while it is in use.
+ */
+ BUG_ON(!rq->special); /* The marker should be invalidated */
+ DMWARN("Invalidating the previous flush suspend is still in"
+ " progress. Please retry later.");
+ r = 0;
+ }
+ spin_unlock_irqrestore(q->queue_lock, flags);
+
+ return r;
+}
+
/*
* Functions to lock and unlock any filesystem running on the
* device.
@@ -1533,7 +2292,7 @@
WARN_ON(md->frozen_sb);
- md->frozen_sb = freeze_bdev(md->suspended_bdev);
+ md->frozen_sb = freeze_bdev(md->bdev);
if (IS_ERR(md->frozen_sb)) {
r = PTR_ERR(md->frozen_sb);
md->frozen_sb = NULL;
@@ -1542,9 +2301,6 @@
set_bit(DMF_FROZEN, &md->flags);
- /* don't bdput right now, we don't want the bdev
- * to go away while it is locked.
- */
return 0;
}
@@ -1553,7 +2309,7 @@
if (!test_bit(DMF_FROZEN, &md->flags))
return;
- thaw_bdev(md->suspended_bdev, md->frozen_sb);
+ thaw_bdev(md->bdev, md->frozen_sb);
md->frozen_sb = NULL;
clear_bit(DMF_FROZEN, &md->flags);
}
@@ -1565,6 +2321,53 @@
* dm_bind_table, dm_suspend must be called to flush any in
* flight bios and ensure that any further io gets deferred.
*/
+/*
+ * Suspend mechanism in request-based dm.
+ *
+ * After the suspend starts, further incoming requests are kept in
+ * the request_queue and deferred.
+ * Remaining requests in the request_queue at the start of suspend are flushed
+ * if it is flush suspend.
+ * The suspend completes when the following conditions have been satisfied,
+ * so wait for it:
+ * 1. q->in_flight is 0 (which means no in_flight request)
+ * 2. queue has been stopped (which means no request dispatching)
+ *
+ *
+ * Noflush suspend
+ * ---------------
+ * Noflush suspend doesn't need to dispatch remaining requests.
+ * So stop the queue immediately. Then, wait for all in_flight requests
+ * to be completed or requeued.
+ *
+ * To abort noflush suspend, start the queue.
+ *
+ *
+ * Flush suspend
+ * -------------
+ * Flush suspend needs to dispatch remaining requests. So stop the queue
+ * after the remaining requests are completed. (Requeued request must be also
+ * re-dispatched and completed. Until then, we can't stop the queue.)
+ *
+ * During flushing the remaining requests, further incoming requests are also
+ * inserted to the same queue. To distinguish which requests are to be
+ * flushed, we insert a marker request to the queue at the time of starting
+ * flush suspend, like a barrier.
+ * The dispatching is blocked when the marker is found on the top of the queue.
+ * And the queue is stopped when all in_flight requests are completed, since
+ * that means the remaining requests are completely flushed.
+ * Then, the marker is removed from the queue.
+ *
+ * To abort flush suspend, we also need to take care of the marker, not only
+ * starting the queue.
+ * We don't remove the marker forcibly from the queue since it's against
+ * the block-layer manner. Instead, we put a invalidated mark on the marker.
+ * When the invalidated marker is found on the top of the queue, it is
+ * immediately removed from the queue, so it doesn't block dispatching.
+ * Because we have only one marker per mapped_device, we can't start another
+ * flush suspend until the invalidated marker is removed from the queue.
+ * So fail and return with -EBUSY in such a case.
+ */
int dm_suspend(struct mapped_device *md, unsigned suspend_flags)
{
struct dm_table *map = NULL;
@@ -1579,6 +2382,11 @@
goto out_unlock;
}
+ if (dm_request_based(md) && !dm_rq_suspend_available(md, noflush)) {
+ r = -EBUSY;
+ goto out_unlock;
+ }
+
map = dm_get_table(md);
/*
@@ -1591,24 +2399,14 @@
/* This does not get reverted if there's an error later. */
dm_table_presuspend_targets(map);
- /* bdget() can stall if the pending I/Os are not flushed */
- if (!noflush) {
- md->suspended_bdev = bdget_disk(md->disk, 0);
- if (!md->suspended_bdev) {
- DMWARN("bdget failed in dm_suspend");
- r = -ENOMEM;
+ /*
+ * Flush I/O to the device. noflush supersedes do_lockfs,
+ * because lock_fs() needs to flush I/Os.
+ */
+ if (!noflush && do_lockfs) {
+ r = lock_fs(md);
+ if (r)
goto out;
- }
-
- /*
- * Flush I/O to the device. noflush supersedes do_lockfs,
- * because lock_fs() needs to flush I/Os.
- */
- if (do_lockfs) {
- r = lock_fs(md);
- if (r)
- goto out;
- }
}
/*
@@ -1634,6 +2432,9 @@
flush_workqueue(md->wq);
+ if (dm_request_based(md))
+ dm_rq_start_suspend(md, noflush);
+
/*
* At this point no more requests are entering target request routines.
* We call dm_wait_for_completion to wait for all existing requests
@@ -1650,6 +2451,9 @@
if (r < 0) {
dm_queue_flush(md);
+ if (dm_request_based(md))
+ dm_rq_abort_suspend(md, noflush);
+
unlock_fs(md);
goto out; /* pushback list is already flushed, so skip flush */
}
@@ -1665,11 +2469,6 @@
set_bit(DMF_SUSPENDED, &md->flags);
out:
- if (r && md->suspended_bdev) {
- bdput(md->suspended_bdev);
- md->suspended_bdev = NULL;
- }
-
dm_table_put(map);
out_unlock:
@@ -1696,21 +2495,20 @@
dm_queue_flush(md);
- unlock_fs(md);
+ /*
+ * Flushing deferred I/Os must be done after targets are resumed
+ * so that mapping of targets can work correctly.
+ * Request-based dm is queueing the deferred I/Os in its request_queue.
+ */
+ if (dm_request_based(md))
+ start_queue(md->queue);
- if (md->suspended_bdev) {
- bdput(md->suspended_bdev);
- md->suspended_bdev = NULL;
- }
+ unlock_fs(md);
clear_bit(DMF_SUSPENDED, &md->flags);
dm_table_unplug_all(map);
-
- dm_kobject_uevent(md);
-
r = 0;
-
out:
dm_table_put(map);
mutex_unlock(&md->suspend_lock);
@@ -1721,9 +2519,19 @@
/*-----------------------------------------------------------------
* Event notification.
*---------------------------------------------------------------*/
-void dm_kobject_uevent(struct mapped_device *md)
+void dm_kobject_uevent(struct mapped_device *md, enum kobject_action action,
+ unsigned cookie)
{
- kobject_uevent(&disk_to_dev(md->disk)->kobj, KOBJ_CHANGE);
+ char udev_cookie[DM_COOKIE_LENGTH];
+ char *envp[] = { udev_cookie, NULL };
+
+ if (!cookie)
+ kobject_uevent(&disk_to_dev(md->disk)->kobj, action);
+ else {
+ snprintf(udev_cookie, DM_COOKIE_LENGTH, "%s=%u",
+ DM_COOKIE_ENV_VAR_NAME, cookie);
+ kobject_uevent_env(&disk_to_dev(md->disk)->kobj, action, envp);
+ }
}
uint32_t dm_next_uevent_seq(struct mapped_device *md)
@@ -1777,6 +2585,10 @@
if (&md->kobj != kobj)
return NULL;
+ if (test_bit(DMF_FREEING, &md->flags) ||
+ test_bit(DMF_DELETING, &md->flags))
+ return NULL;
+
dm_get(md);
return md;
}
@@ -1797,6 +2609,61 @@
}
EXPORT_SYMBOL_GPL(dm_noflush_suspending);
+struct dm_md_mempools *dm_alloc_md_mempools(unsigned type)
+{
+ struct dm_md_mempools *pools = kmalloc(sizeof(*pools), GFP_KERNEL);
+
+ if (!pools)
+ return NULL;
+
+ pools->io_pool = (type == DM_TYPE_BIO_BASED) ?
+ mempool_create_slab_pool(MIN_IOS, _io_cache) :
+ mempool_create_slab_pool(MIN_IOS, _rq_bio_info_cache);
+ if (!pools->io_pool)
+ goto free_pools_and_out;
+
+ pools->tio_pool = (type == DM_TYPE_BIO_BASED) ?
+ mempool_create_slab_pool(MIN_IOS, _tio_cache) :
+ mempool_create_slab_pool(MIN_IOS, _rq_tio_cache);
+ if (!pools->tio_pool)
+ goto free_io_pool_and_out;
+
+ pools->bs = (type == DM_TYPE_BIO_BASED) ?
+ bioset_create(16, 0) : bioset_create(MIN_IOS, 0);
+ if (!pools->bs)
+ goto free_tio_pool_and_out;
+
+ return pools;
+
+free_tio_pool_and_out:
+ mempool_destroy(pools->tio_pool);
+
+free_io_pool_and_out:
+ mempool_destroy(pools->io_pool);
+
+free_pools_and_out:
+ kfree(pools);
+
+ return NULL;
+}
+
+void dm_free_md_mempools(struct dm_md_mempools *pools)
+{
+ if (!pools)
+ return;
+
+ if (pools->io_pool)
+ mempool_destroy(pools->io_pool);
+
+ if (pools->tio_pool)
+ mempool_destroy(pools->tio_pool);
+
+ if (pools->bs)
+ bioset_free(pools->bs);
+
+ kfree(pools);
+}
+
static struct block_device_operations dm_blk_dops = {
.open = dm_blk_open,
.release = dm_blk_close,
diff --git a/drivers/md/dm.h b/drivers/md/dm.h
index a31506d..23278ae 100644
--- a/drivers/md/dm.h
+++ b/drivers/md/dm.h
@@ -23,6 +23,13 @@
#define DM_SUSPEND_NOFLUSH_FLAG (1 << 1)
/*
+ * Type of table and mapped_device's mempool
+ */
+#define DM_TYPE_NONE 0
+#define DM_TYPE_BIO_BASED 1
+#define DM_TYPE_REQUEST_BASED 2
+
+/*
* List of devices that a metadevice uses and should open/close.
*/
struct dm_dev_internal {
@@ -32,6 +39,7 @@
};
struct dm_table;
+struct dm_md_mempools;
/*-----------------------------------------------------------------
* Internal table functions.
@@ -41,18 +49,34 @@
void (*fn)(void *), void *context);
struct dm_target *dm_table_get_target(struct dm_table *t, unsigned int index);
struct dm_target *dm_table_find_target(struct dm_table *t, sector_t sector);
-void dm_table_set_restrictions(struct dm_table *t, struct request_queue *q);
+int dm_calculate_queue_limits(struct dm_table *table,
+ struct queue_limits *limits);
+void dm_table_set_restrictions(struct dm_table *t, struct request_queue *q,
+ struct queue_limits *limits);
struct list_head *dm_table_get_devices(struct dm_table *t);
void dm_table_presuspend_targets(struct dm_table *t);
void dm_table_postsuspend_targets(struct dm_table *t);
int dm_table_resume_targets(struct dm_table *t);
int dm_table_any_congested(struct dm_table *t, int bdi_bits);
+int dm_table_any_busy_target(struct dm_table *t);
+int dm_table_set_type(struct dm_table *t);
+unsigned dm_table_get_type(struct dm_table *t);
+bool dm_table_bio_based(struct dm_table *t);
+bool dm_table_request_based(struct dm_table *t);
+int dm_table_alloc_md_mempools(struct dm_table *t);
+void dm_table_free_md_mempools(struct dm_table *t);
+struct dm_md_mempools *dm_table_get_md_mempools(struct dm_table *t);
/*
* To check the return value from dm_table_find_target().
*/
#define dm_target_is_valid(t) ((t)->table)
+/*
+ * To check whether the target type is request-based or not (bio-based).
+ */
+#define dm_target_request_based(t) ((t)->type->map_rq != NULL)
+
/*-----------------------------------------------------------------
* A registry of target types.
*---------------------------------------------------------------*/
@@ -92,9 +116,16 @@
int dm_open_count(struct mapped_device *md);
int dm_lock_for_deletion(struct mapped_device *md);
-void dm_kobject_uevent(struct mapped_device *md);
+void dm_kobject_uevent(struct mapped_device *md, enum kobject_action action,
+ unsigned cookie);
int dm_kcopyd_init(void);
void dm_kcopyd_exit(void);
+/*
+ * Mempool operations
+ */
+struct dm_md_mempools *dm_alloc_md_mempools(unsigned type);
+void dm_free_md_mempools(struct dm_md_mempools *pools);
+
#endif
diff --git a/drivers/media/common/ir-keymaps.c b/drivers/media/common/ir-keymaps.c
index 3fe158a..4216328 100644
--- a/drivers/media/common/ir-keymaps.c
+++ b/drivers/media/common/ir-keymaps.c
@@ -2750,3 +2750,26 @@
[0x1b] = KEY_B, /*recall*/
};
EXPORT_SYMBOL_GPL(ir_codes_dm1105_nec);
+
+/* EVGA inDtube
+ Devin Heitmueller <devin.heitmueller@gmail.com>
+ */
+IR_KEYTAB_TYPE ir_codes_evga_indtube[IR_KEYTAB_SIZE] = {
+ [0x12] = KEY_POWER,
+ [0x02] = KEY_MODE, /* TV */
+ [0x14] = KEY_MUTE,
+ [0x1a] = KEY_CHANNELUP,
+ [0x16] = KEY_TV2, /* PIP */
+ [0x1d] = KEY_VOLUMEUP,
+ [0x05] = KEY_CHANNELDOWN,
+ [0x0f] = KEY_PLAYPAUSE,
+ [0x19] = KEY_VOLUMEDOWN,
+ [0x1c] = KEY_REWIND,
+ [0x0d] = KEY_RECORD,
+ [0x18] = KEY_FORWARD,
+ [0x1e] = KEY_PREVIOUS,
+ [0x1b] = KEY_STOP,
+ [0x1f] = KEY_NEXT,
+ [0x13] = KEY_CAMERA,
+};
+EXPORT_SYMBOL_GPL(ir_codes_evga_indtube);
diff --git a/drivers/media/dvb/frontends/stv0900.h b/drivers/media/dvb/frontends/stv0900.h
index 8a1332c..bf4e9b6 100644
--- a/drivers/media/dvb/frontends/stv0900.h
+++ b/drivers/media/dvb/frontends/stv0900.h
@@ -29,6 +29,11 @@
#include <linux/dvb/frontend.h>
#include "dvb_frontend.h"
+struct stv0900_reg {
+ u16 addr;
+ u8 val;
+};
+
struct stv0900_config {
u8 demod_address;
u32 xtal;
@@ -38,7 +43,7 @@
u8 path1_mode;
u8 path2_mode;
-
+ struct stv0900_reg *ts_config_regs;
u8 tun1_maddress;/* 0, 1, 2, 3 for 0xc0, 0xc2, 0xc4, 0xc6 */
u8 tun2_maddress;
u8 tun1_adc;/* 1 for stv6110, 2 for stb6100 */
diff --git a/drivers/media/dvb/frontends/stv0900_core.c b/drivers/media/dvb/frontends/stv0900_core.c
index 8499bcf..1da045f 100644
--- a/drivers/media/dvb/frontends/stv0900_core.c
+++ b/drivers/media/dvb/frontends/stv0900_core.c
@@ -149,31 +149,31 @@
dprintk(KERN_ERR "%s: i2c error %d\n", __func__, ret);
}
-u8 stv0900_read_reg(struct stv0900_internal *i_params, u16 reg_addr)
+u8 stv0900_read_reg(struct stv0900_internal *i_params, u16 reg)
{
- u8 data[2];
int ret;
- struct i2c_msg i2cmsg = {
- .addr = i_params->i2c_addr,
- .flags = 0,
- .len = 2,
- .buf = data,
+ u8 b0[] = { MSB(reg), LSB(reg) };
+ u8 buf = 0;
+ struct i2c_msg msg[] = {
+ {
+ .addr = i_params->i2c_addr,
+ .flags = 0,
+ .buf = b0,
+ .len = 2,
+ }, {
+ .addr = i_params->i2c_addr,
+ .flags = I2C_M_RD,
+ .buf = &buf,
+ .len = 1,
+ },
};
- data[0] = MSB(reg_addr);
- data[1] = LSB(reg_addr);
+ ret = i2c_transfer(i_params->i2c_adap, msg, 2);
+ if (ret != 2)
+ dprintk(KERN_ERR "%s: i2c error %d, reg[0x%02x]\n",
+ __func__, ret, reg);
- ret = i2c_transfer(i_params->i2c_adap, &i2cmsg, 1);
- if (ret != 1)
- dprintk(KERN_ERR "%s: i2c error %d\n", __func__, ret);
-
- i2cmsg.flags = I2C_M_RD;
- i2cmsg.len = 1;
- ret = i2c_transfer(i_params->i2c_adap, &i2cmsg, 1);
- if (ret != 1)
- dprintk(KERN_ERR "%s: i2c error %d\n", __func__, ret);
-
- return data[0];
+ return buf;
}
void extract_mask_pos(u32 label, u8 *mask, u8 *pos)
@@ -712,6 +712,44 @@
return c_n;
}
+static int stv0900_read_ucblocks(struct dvb_frontend *fe, u32 * ucblocks)
+{
+ struct stv0900_state *state = fe->demodulator_priv;
+ struct stv0900_internal *i_params = state->internal;
+ enum fe_stv0900_demod_num demod = state->demod;
+ u8 err_val1, err_val0;
+ s32 err_field1, err_field0;
+ u32 header_err_val = 0;
+
+ *ucblocks = 0x0;
+ if (stv0900_get_standard(fe, demod) == STV0900_DVBS2_STANDARD) {
+ /* DVB-S2 delineator errors count */
+
+ /* retreiving number for errnous headers */
+ dmd_reg(err_field0, R0900_P1_BBFCRCKO0,
+ R0900_P2_BBFCRCKO0);
+ dmd_reg(err_field1, R0900_P1_BBFCRCKO1,
+ R0900_P2_BBFCRCKO1);
+
+ err_val1 = stv0900_read_reg(i_params, err_field1);
+ err_val0 = stv0900_read_reg(i_params, err_field0);
+ header_err_val = (err_val1<<8) | err_val0;
+
+ /* retreiving number for errnous packets */
+ dmd_reg(err_field0, R0900_P1_UPCRCKO0,
+ R0900_P2_UPCRCKO0);
+ dmd_reg(err_field1, R0900_P1_UPCRCKO1,
+ R0900_P2_UPCRCKO1);
+
+ err_val1 = stv0900_read_reg(i_params, err_field1);
+ err_val0 = stv0900_read_reg(i_params, err_field0);
+ *ucblocks = (err_val1<<8) | err_val0;
+ *ucblocks += header_err_val;
+ }
+
+ return 0;
+}
+
static int stv0900_read_snr(struct dvb_frontend *fe, u16 *snr)
{
*snr = stv0900_carr_get_quality(fe,
@@ -1355,7 +1393,7 @@
struct stv0900_state *state = fe->demodulator_priv;
enum fe_stv0900_error error = STV0900_NO_ERROR;
enum fe_stv0900_error demodError = STV0900_NO_ERROR;
- int selosci;
+ int selosci, i;
struct stv0900_inode *temp_int = find_inode(state->i2c_adap,
state->config->demod_address);
@@ -1402,7 +1440,23 @@
stv0900_write_bits(state->internal, F0900_P1_ROLLOFF_CONTROL, p_init->rolloff);
stv0900_write_bits(state->internal, F0900_P2_ROLLOFF_CONTROL, p_init->rolloff);
- stv0900_set_ts_parallel_serial(state->internal, p_init->path1_ts_clock, p_init->path2_ts_clock);
+ state->internal->ts_config = p_init->ts_config;
+ if (state->internal->ts_config == NULL)
+ stv0900_set_ts_parallel_serial(state->internal,
+ p_init->path1_ts_clock,
+ p_init->path2_ts_clock);
+ else {
+ for (i = 0; state->internal->ts_config[i].addr != 0xffff; i++)
+ stv0900_write_reg(state->internal,
+ state->internal->ts_config[i].addr,
+ state->internal->ts_config[i].val);
+
+ stv0900_write_bits(state->internal, F0900_P2_RST_HWARE, 1);
+ stv0900_write_bits(state->internal, F0900_P2_RST_HWARE, 0);
+ stv0900_write_bits(state->internal, F0900_P1_RST_HWARE, 1);
+ stv0900_write_bits(state->internal, F0900_P1_RST_HWARE, 0);
+ }
+
stv0900_write_bits(state->internal, F0900_P1_TUN_MADDRESS, p_init->tun1_maddress);
switch (p_init->tuner1_adc) {
case 1:
@@ -1882,6 +1936,7 @@
.read_ber = stv0900_read_ber,
.read_signal_strength = stv0900_read_signal_strength,
.read_snr = stv0900_read_snr,
+ .read_ucblocks = stv0900_read_ucblocks,
};
struct dvb_frontend *stv0900_attach(const struct stv0900_config *config,
@@ -1915,6 +1970,7 @@
init_params.tun1_iq_inversion = STV0900_IQ_NORMAL;
init_params.tuner1_adc = config->tun1_adc;
init_params.path2_ts_clock = config->path2_mode;
+ init_params.ts_config = config->ts_config_regs;
init_params.tun2_maddress = config->tun2_maddress;
init_params.tuner2_adc = config->tun2_adc;
init_params.tun2_iq_inversion = STV0900_IQ_SWAPPED;
diff --git a/drivers/media/dvb/frontends/stv0900_priv.h b/drivers/media/dvb/frontends/stv0900_priv.h
index 67dc8ec..5ed7a14 100644
--- a/drivers/media/dvb/frontends/stv0900_priv.h
+++ b/drivers/media/dvb/frontends/stv0900_priv.h
@@ -271,6 +271,7 @@
/* IQ from the tuner2 to the demod */
enum stv0900_iq_inversion tun2_iq_inversion;
+ struct stv0900_reg *ts_config;
};
struct stv0900_search_params {
@@ -363,6 +364,7 @@
u8 i2c_addr;
u8 clkmode;/* 0 for CLKI, 2 for XTALI */
u8 chip_id;
+ struct stv0900_reg *ts_config;
enum fe_stv0900_error errs;
int dmds_used;
};
diff --git a/drivers/media/dvb/frontends/stv090x.c b/drivers/media/dvb/frontends/stv090x.c
index 96ef745..488bdfb 100644
--- a/drivers/media/dvb/frontends/stv090x.c
+++ b/drivers/media/dvb/frontends/stv090x.c
@@ -2674,7 +2674,7 @@
static u8 stv090x_optimize_carloop_short(struct stv090x_state *state)
{
- struct stv090x_short_frame_crloop *short_crl;
+ struct stv090x_short_frame_crloop *short_crl = NULL;
s32 index = 0;
u8 aclc = 0x0b;
@@ -2694,10 +2694,13 @@
break;
}
- if (state->dev_ver >= 0x30)
- short_crl = stv090x_s2_short_crl_cut20;
- else if (state->dev_ver >= 0x20)
+ if (state->dev_ver >= 0x30) {
+ /* Cut 3.0 and up */
short_crl = stv090x_s2_short_crl_cut30;
+ } else {
+ /* Cut 2.0 and up: we don't support cuts older than 2.0 */
+ short_crl = stv090x_s2_short_crl_cut20;
+ }
if (state->srate <= 3000000)
aclc = short_crl[index].crl_2;
diff --git a/drivers/media/dvb/frontends/tda10048.c b/drivers/media/dvb/frontends/tda10048.c
index 4302c56..cc8862c 100644
--- a/drivers/media/dvb/frontends/tda10048.c
+++ b/drivers/media/dvb/frontends/tda10048.c
@@ -210,6 +210,7 @@
{ TDA10048_CLK_4000, TDA10048_IF_36130, 10, 0, 0 },
{ TDA10048_CLK_16000, TDA10048_IF_3300, 10, 3, 0 },
{ TDA10048_CLK_16000, TDA10048_IF_3500, 10, 3, 0 },
+ { TDA10048_CLK_16000, TDA10048_IF_3800, 10, 3, 0 },
{ TDA10048_CLK_16000, TDA10048_IF_4000, 10, 3, 0 },
{ TDA10048_CLK_16000, TDA10048_IF_4300, 10, 3, 0 },
{ TDA10048_CLK_16000, TDA10048_IF_36130, 10, 3, 0 },
diff --git a/drivers/media/dvb/siano/smscoreapi.c b/drivers/media/dvb/siano/smscoreapi.c
index 32be382..a246903 100644
--- a/drivers/media/dvb/siano/smscoreapi.c
+++ b/drivers/media/dvb/siano/smscoreapi.c
@@ -1422,8 +1422,8 @@
struct smscore_gpio_config *pGpioConfig) {
u32 totalLen;
- u32 TranslatedPinNum;
- u32 GroupNum;
+ u32 TranslatedPinNum = 0;
+ u32 GroupNum = 0;
u32 ElectricChar;
u32 groupCfg;
void *buffer;
diff --git a/drivers/media/radio/radio-tea5764.c b/drivers/media/radio/radio-tea5764.c
index 3936238..3cd76dd 100644
--- a/drivers/media/radio/radio-tea5764.c
+++ b/drivers/media/radio/radio-tea5764.c
@@ -322,7 +322,9 @@
v->rangehigh = FREQ_MAX * FREQ_MUL;
v->capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO;
if (r->tunchk & TEA5764_TUNCHK_STEREO)
- v->rxsubchans = V4L2_TUNER_SUB_STEREO;
+ v->rxsubchans = V4L2_TUNER_SUB_STEREO;
+ else
+ v->rxsubchans = V4L2_TUNER_SUB_MONO;
v->audmode = tea5764_get_audout_mode(radio);
v->signal = TEA5764_TUNCHK_LEVEL(r->tunchk) * 0xffff / 0xf;
v->afc = TEA5764_TUNCHK_IFCNT(r->tunchk);
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index 94f4405..061e147 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -866,9 +866,13 @@
module will be called w9968cf.
config USB_OV511
- tristate "USB OV511 Camera support"
+ tristate "USB OV511 Camera support (DEPRECATED)"
depends on VIDEO_V4L1
---help---
+ This driver is DEPRECATED please use the gspca ov519 module
+ instead. Note that for the ov511 / ov518 support of the gspca module
+ you need atleast version 0.6.0 of libv4l.
+
Say Y here if you want to connect this type of camera to your
computer's USB port. See <file:Documentation/video4linux/ov511.txt>
for more information and for a list of supported cameras.
diff --git a/drivers/media/video/cx18/cx18-controls.c b/drivers/media/video/cx18/cx18-controls.c
index 8e35c3a..5136df1 100644
--- a/drivers/media/video/cx18/cx18-controls.c
+++ b/drivers/media/video/cx18/cx18-controls.c
@@ -61,6 +61,8 @@
switch (qctrl->id) {
/* Standard V4L2 controls */
+ case V4L2_CID_USER_CLASS:
+ return v4l2_ctrl_query_fill(qctrl, 0, 0, 0, 0);
case V4L2_CID_BRIGHTNESS:
case V4L2_CID_HUE:
case V4L2_CID_SATURATION:
diff --git a/drivers/media/video/cx231xx/cx231xx-avcore.c b/drivers/media/video/cx231xx/cx231xx-avcore.c
index 6a94640..28f48f4 100644
--- a/drivers/media/video/cx231xx/cx231xx-avcore.c
+++ b/drivers/media/video/cx231xx/cx231xx-avcore.c
@@ -1052,22 +1052,13 @@
/* Set resolution of the video */
int cx231xx_resolution_set(struct cx231xx *dev)
{
- int width, height;
- u32 hscale, vscale;
- int status = 0;
-
- width = dev->width;
- height = dev->height;
-
- get_scale(dev, width, height, &hscale, &vscale);
-
/* set horzontal scale */
- status = vid_blk_write_word(dev, HSCALE_CTRL, hscale);
+ int status = vid_blk_write_word(dev, HSCALE_CTRL, dev->hscale);
+ if (status)
+ return status;
/* set vertical scale */
- status = vid_blk_write_word(dev, VSCALE_CTRL, vscale);
-
- return status;
+ return vid_blk_write_word(dev, VSCALE_CTRL, dev->vscale);
}
/******************************************************************************
@@ -2055,7 +2046,7 @@
int cx231xx_capture_start(struct cx231xx *dev, int start, u8 media_type)
{
- int rc;
+ int rc = -1;
u32 ep_mask = -1;
struct pcb_config *pcb_config;
diff --git a/drivers/media/video/cx231xx/cx231xx-video.c b/drivers/media/video/cx231xx/cx231xx-video.c
index a23ae73..609bae6 100644
--- a/drivers/media/video/cx231xx/cx231xx-video.c
+++ b/drivers/media/video/cx231xx/cx231xx-video.c
@@ -893,9 +893,9 @@
return 0;
}
-void get_scale(struct cx231xx *dev,
- unsigned int width, unsigned int height,
- unsigned int *hscale, unsigned int *vscale)
+static void get_scale(struct cx231xx *dev,
+ unsigned int width, unsigned int height,
+ unsigned int *hscale, unsigned int *vscale)
{
unsigned int maxw = norm_maxw(dev);
unsigned int maxh = norm_maxh(dev);
@@ -907,10 +907,6 @@
*vscale = (((unsigned long)maxh) << 12) / height - 4096L;
if (*vscale >= 0x4000)
*vscale = 0x3fff;
-
- dev->hscale = *hscale;
- dev->vscale = *vscale;
-
}
/* ------------------------------------------------------------------
@@ -955,8 +951,8 @@
{
struct cx231xx_fh *fh = priv;
struct cx231xx *dev = fh->dev;
- int width = f->fmt.pix.width;
- int height = f->fmt.pix.height;
+ unsigned int width = f->fmt.pix.width;
+ unsigned int height = f->fmt.pix.height;
unsigned int maxw = norm_maxw(dev);
unsigned int maxh = norm_maxh(dev);
unsigned int hscale, vscale;
@@ -971,17 +967,7 @@
/* width must even because of the YUYV format
height must be even because of interlacing */
- height &= 0xfffe;
- width &= 0xfffe;
-
- if (unlikely(height < 32))
- height = 32;
- if (unlikely(height > maxh))
- height = maxh;
- if (unlikely(width < 48))
- width = 48;
- if (unlikely(width > maxw))
- width = maxw;
+ v4l_bound_align_image(&width, 48, maxw, 1, &height, 32, maxh, 1, 0);
get_scale(dev, width, height, &hscale, &vscale);
diff --git a/drivers/media/video/cx231xx/cx231xx.h b/drivers/media/video/cx231xx/cx231xx.h
index e38eb2d..a0f823a 100644
--- a/drivers/media/video/cx231xx/cx231xx.h
+++ b/drivers/media/video/cx231xx/cx231xx.h
@@ -722,9 +722,6 @@
int cx231xx_set_decoder_video_input(struct cx231xx *dev, u8 pin_type, u8 input);
int cx231xx_do_mode_ctrl_overrides(struct cx231xx *dev);
int cx231xx_set_audio_input(struct cx231xx *dev, u8 input);
-void get_scale(struct cx231xx *dev,
- unsigned int width, unsigned int height,
- unsigned int *hscale, unsigned int *vscale);
/* Provided by cx231xx-video.c */
int cx231xx_register_extension(struct cx231xx_ops *dev);
diff --git a/drivers/media/video/cx2341x.c b/drivers/media/video/cx2341x.c
index 8ded529..4c8e958 100644
--- a/drivers/media/video/cx2341x.c
+++ b/drivers/media/video/cx2341x.c
@@ -500,6 +500,8 @@
int err;
switch (qctrl->id) {
+ case V4L2_CID_MPEG_CLASS:
+ return v4l2_ctrl_query_fill(qctrl, 0, 0, 0, 0);
case V4L2_CID_MPEG_STREAM_TYPE:
return v4l2_ctrl_query_fill(qctrl,
V4L2_MPEG_STREAM_TYPE_MPEG2_PS,
diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c
index e236df2..48a9751 100644
--- a/drivers/media/video/cx23885/cx23885-dvb.c
+++ b/drivers/media/video/cx23885/cx23885-dvb.c
@@ -45,6 +45,7 @@
#include "dibx000_common.h"
#include "zl10353.h"
#include "stv0900.h"
+#include "stv0900_reg.h"
#include "stv6110.h"
#include "lnbh24.h"
#include "cx24116.h"
@@ -242,12 +243,22 @@
.if_lvl = 6, .rfagc_top = 0x37 },
};
+static struct tda18271_std_map hauppauge_hvr1200_tda18271_std_map = {
+ .dvbt_6 = { .if_freq = 3300, .agc_mode = 3, .std = 4,
+ .if_lvl = 1, .rfagc_top = 0x37, },
+ .dvbt_7 = { .if_freq = 3800, .agc_mode = 3, .std = 5,
+ .if_lvl = 1, .rfagc_top = 0x37, },
+ .dvbt_8 = { .if_freq = 4300, .agc_mode = 3, .std = 6,
+ .if_lvl = 1, .rfagc_top = 0x37, },
+};
+
static struct tda18271_config hauppauge_tda18271_config = {
.std_map = &hauppauge_tda18271_std_map,
.gate = TDA18271_GATE_ANALOG,
};
static struct tda18271_config hauppauge_hvr1200_tuner_config = {
+ .std_map = &hauppauge_hvr1200_tda18271_std_map,
.gate = TDA18271_GATE_ANALOG,
};
@@ -370,13 +381,25 @@
.disable_i2c_gate_ctrl = 1,
};
+static struct stv0900_reg stv0900_ts_regs[] = {
+ { R0900_TSGENERAL, 0x00 },
+ { R0900_P1_TSSPEED, 0x40 },
+ { R0900_P2_TSSPEED, 0x40 },
+ { R0900_P1_TSCFGM, 0xc0 },
+ { R0900_P2_TSCFGM, 0xc0 },
+ { R0900_P1_TSCFGH, 0xe0 },
+ { R0900_P2_TSCFGH, 0xe0 },
+ { R0900_P1_TSCFGL, 0x20 },
+ { R0900_P2_TSCFGL, 0x20 },
+ { 0xffff, 0xff }, /* terminate */
+};
+
static struct stv0900_config netup_stv0900_config = {
.demod_address = 0x68,
.xtal = 27000000,
.clkmode = 3,/* 0-CLKI, 2-XTALI, else AUTO */
.diseqc_mode = 2,/* 2/3 PWM */
- .path1_mode = 2,/*Serial continues clock */
- .path2_mode = 2,/*Serial continues clock */
+ .ts_config_regs = stv0900_ts_regs,
.tun1_maddress = 0,/* 0x60 */
.tun2_maddress = 3,/* 0x63 */
.tun1_adc = 1,/* 1 Vpp */
@@ -736,7 +759,8 @@
if (!dvb_attach(lnbh24_attach,
fe0->dvb.frontend,
&i2c_bus->i2c_adap,
- LNBH24_PCL, 0, 0x09))
+ LNBH24_PCL,
+ LNBH24_TTX, 0x09))
printk(KERN_ERR
"No LNBH24 found!\n");
@@ -756,7 +780,8 @@
if (!dvb_attach(lnbh24_attach,
fe0->dvb.frontend,
&i2c_bus->i2c_adap,
- LNBH24_PCL, 0, 0x0a))
+ LNBH24_PCL,
+ LNBH24_TTX, 0x0a))
printk(KERN_ERR
"No LNBH24 found!\n");
diff --git a/drivers/media/video/cx23885/cx23885-video.c b/drivers/media/video/cx23885/cx23885-video.c
index 66bbd2e..70836af 100644
--- a/drivers/media/video/cx23885/cx23885-video.c
+++ b/drivers/media/video/cx23885/cx23885-video.c
@@ -963,15 +963,8 @@
}
f->fmt.pix.field = field;
- if (f->fmt.pix.height < 32)
- f->fmt.pix.height = 32;
- if (f->fmt.pix.height > maxh)
- f->fmt.pix.height = maxh;
- if (f->fmt.pix.width < 48)
- f->fmt.pix.width = 48;
- if (f->fmt.pix.width > maxw)
- f->fmt.pix.width = maxw;
- f->fmt.pix.width &= ~0x03;
+ v4l_bound_align_image(&f->fmt.pix.width, 48, maxw, 2,
+ &f->fmt.pix.height, 32, maxh, 0, 0);
f->fmt.pix.bytesperline =
(f->fmt.pix.width * fmt->depth) >> 3;
f->fmt.pix.sizeimage =
diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c
index 94b7a52..a5cc1c1 100644
--- a/drivers/media/video/cx88/cx88-cards.c
+++ b/drivers/media/video/cx88/cx88-cards.c
@@ -1524,33 +1524,45 @@
},
.mpeg = CX88_MPEG_DVB,
},
+ /* Terry Wu <terrywu2009@gmail.com> */
+ /* TV Audio : set GPIO 2, 18, 19 value to 0, 1, 0 */
+ /* FM Audio : set GPIO 2, 18, 19 value to 0, 0, 0 */
+ /* Line-in Audio : set GPIO 2, 18, 19 value to 0, 1, 1 */
+ /* Mute Audio : set GPIO 2 value to 1 */
[CX88_BOARD_WINFAST_TV2000_XP_GLOBAL] = {
- .name = "Winfast TV2000 XP Global",
+ .name = "Leadtek TV2000 XP Global",
.tuner_type = TUNER_XC2028,
.tuner_addr = 0x61,
+ .radio_type = TUNER_XC2028,
+ .radio_addr = 0x61,
.input = { {
.type = CX88_VMUX_TELEVISION,
.vmux = 0,
- .gpio0 = 0x0400, /* pin 2:mute = 0 (off?) */
+ .gpio0 = 0x0400, /* pin 2 = 0 */
.gpio1 = 0x0000,
- .gpio2 = 0x0800, /* pin 19:audio = 0 (tv) */
-
+ .gpio2 = 0x0C04, /* pin 18 = 1, pin 19 = 0 */
+ .gpio3 = 0x0000,
}, {
.type = CX88_VMUX_COMPOSITE1,
.vmux = 1,
- .gpio0 = 0x0400, /* probably? or 0x0404 to turn mute on */
+ .gpio0 = 0x0400, /* pin 2 = 0 */
.gpio1 = 0x0000,
- .gpio2 = 0x0808, /* pin 19:audio = 1 (line) */
-
+ .gpio2 = 0x0C0C, /* pin 18 = 1, pin 19 = 1 */
+ .gpio3 = 0x0000,
}, {
.type = CX88_VMUX_SVIDEO,
.vmux = 2,
+ .gpio0 = 0x0400, /* pin 2 = 0 */
+ .gpio1 = 0x0000,
+ .gpio2 = 0x0C0C, /* pin 18 = 1, pin 19 = 1 */
+ .gpio3 = 0x0000,
} },
.radio = {
.type = CX88_RADIO,
- .gpio0 = 0x004ff,
- .gpio1 = 0x010ff,
- .gpio2 = 0x0ff,
+ .gpio0 = 0x0400, /* pin 2 = 0 */
+ .gpio1 = 0x0000,
+ .gpio2 = 0x0C00, /* pin 18 = 0, pin 19 = 0 */
+ .gpio3 = 0x0000,
},
},
[CX88_BOARD_POWERCOLOR_REAL_ANGEL] = {
@@ -2438,6 +2450,41 @@
.subvendor = 0x107d,
.subdevice = 0x6654,
.card = CX88_BOARD_WINFAST_DTV1800H,
+ }, {
+ /* PVR2000 PAL Model [107d:6630] */
+ .subvendor = 0x107d,
+ .subdevice = 0x6630,
+ .card = CX88_BOARD_LEADTEK_PVR2000,
+ }, {
+ /* PVR2000 PAL Model [107d:6638] */
+ .subvendor = 0x107d,
+ .subdevice = 0x6638,
+ .card = CX88_BOARD_LEADTEK_PVR2000,
+ }, {
+ /* PVR2000 NTSC Model [107d:6631] */
+ .subvendor = 0x107d,
+ .subdevice = 0x6631,
+ .card = CX88_BOARD_LEADTEK_PVR2000,
+ }, {
+ /* PVR2000 NTSC Model [107d:6637] */
+ .subvendor = 0x107d,
+ .subdevice = 0x6637,
+ .card = CX88_BOARD_LEADTEK_PVR2000,
+ }, {
+ /* PVR2000 NTSC Model [107d:663d] */
+ .subvendor = 0x107d,
+ .subdevice = 0x663d,
+ .card = CX88_BOARD_LEADTEK_PVR2000,
+ }, {
+ /* DV2000 NTSC Model [107d:6621] */
+ .subvendor = 0x107d,
+ .subdevice = 0x6621,
+ .card = CX88_BOARD_WINFAST_DV2000,
+ }, {
+ /* TV2000 XP Global [107d:6618] */
+ .subvendor = 0x107d,
+ .subdevice = 0x6618,
+ .card = CX88_BOARD_WINFAST_TV2000_XP_GLOBAL,
},
};
@@ -2446,12 +2493,6 @@
static void leadtek_eeprom(struct cx88_core *core, u8 *eeprom_data)
{
- /* This is just for the "Winfast 2000XP Expert" board ATM; I don't have data on
- * any others.
- *
- * Byte 0 is 1 on the NTSC board.
- */
-
if (eeprom_data[4] != 0x7d ||
eeprom_data[5] != 0x10 ||
eeprom_data[7] != 0x66) {
@@ -2459,8 +2500,19 @@
return;
}
- core->board.tuner_type = (eeprom_data[6] == 0x13) ?
- TUNER_PHILIPS_FM1236_MK3 : TUNER_PHILIPS_FM1216ME_MK3;
+ /* Terry Wu <terrywu2009@gmail.com> */
+ switch (eeprom_data[6]) {
+ case 0x13: /* SSID 6613 for TV2000 XP Expert NTSC Model */
+ case 0x21: /* SSID 6621 for DV2000 NTSC Model */
+ case 0x31: /* SSID 6631 for PVR2000 NTSC Model */
+ case 0x37: /* SSID 6637 for PVR2000 NTSC Model */
+ case 0x3d: /* SSID 6637 for PVR2000 NTSC Model */
+ core->board.tuner_type = TUNER_PHILIPS_FM1236_MK3;
+ break;
+ default:
+ core->board.tuner_type = TUNER_PHILIPS_FM1216ME_MK3;
+ break;
+ }
info_printk(core, "Leadtek Winfast 2000XP Expert config: "
"tuner=%d, eeprom[0]=0x%02x\n",
@@ -2713,7 +2765,6 @@
{
/* Board-specific callbacks */
switch (core->boardnr) {
- case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL:
case CX88_BOARD_POWERCOLOR_REAL_ANGEL:
case CX88_BOARD_GENIATECH_X8000_MT:
case CX88_BOARD_KWORLD_ATSC_120:
@@ -2725,6 +2776,7 @@
case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PRO:
case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO:
return cx88_dvico_xc2028_callback(core, command, arg);
+ case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL:
case CX88_BOARD_WINFAST_DTV1800H:
return cx88_xc3028_winfast1800h_callback(core, command, arg);
}
@@ -2914,6 +2966,7 @@
udelay(1000);
break;
+ case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL:
case CX88_BOARD_WINFAST_DTV1800H:
/* GPIO 12 (xc3028 tuner reset) */
cx_set(MO_GP1_IO, 0x1010);
@@ -2950,6 +3003,7 @@
case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO:
ctl->demod = XC3028_FE_OREN538;
break;
+ case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL:
case CX88_BOARD_PROLINK_PV_GLOBAL_XTREME:
case CX88_BOARD_PROLINK_PV_8000GT:
/*
@@ -2993,6 +3047,8 @@
if (0 == core->i2c_rc)
gdi_eeprom(core, eeprom);
break;
+ case CX88_BOARD_LEADTEK_PVR2000:
+ case CX88_BOARD_WINFAST_DV2000:
case CX88_BOARD_WINFAST2000XP_EXPERT:
if (0 == core->i2c_rc)
leadtek_eeprom(core, eeprom);
diff --git a/drivers/media/video/cx88/cx88-video.c b/drivers/media/video/cx88/cx88-video.c
index 0ccac70..b127708 100644
--- a/drivers/media/video/cx88/cx88-video.c
+++ b/drivers/media/video/cx88/cx88-video.c
@@ -1111,15 +1111,8 @@
}
f->fmt.pix.field = field;
- if (f->fmt.pix.height < 32)
- f->fmt.pix.height = 32;
- if (f->fmt.pix.height > maxh)
- f->fmt.pix.height = maxh;
- if (f->fmt.pix.width < 48)
- f->fmt.pix.width = 48;
- if (f->fmt.pix.width > maxw)
- f->fmt.pix.width = maxw;
- f->fmt.pix.width &= ~0x03;
+ v4l_bound_align_image(&f->fmt.pix.width, 48, maxw, 2,
+ &f->fmt.pix.height, 32, maxh, 0, 0);
f->fmt.pix.bytesperline =
(f->fmt.pix.width * fmt->depth) >> 3;
f->fmt.pix.sizeimage =
diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index 00cc791a..c43fdb9 100644
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -139,6 +139,24 @@
{ -1, -1, -1, -1},
};
+/* Evga inDtube
+ GPIO0 - Enable digital power (s5h1409) - low to enable
+ GPIO1 - Enable analog power (tvp5150/emp202) - low to enable
+ GPIO4 - xc3028 reset
+ GOP3 - s5h1409 reset
+ */
+static struct em28xx_reg_seq evga_indtube_analog[] = {
+ {EM28XX_R08_GPIO, 0x79, 0xff, 60},
+ { -1, -1, -1, -1},
+};
+
+static struct em28xx_reg_seq evga_indtube_digital[] = {
+ {EM28XX_R08_GPIO, 0x7a, 0xff, 1},
+ {EM2880_R04_GPO, 0x04, 0xff, 10},
+ {EM2880_R04_GPO, 0x0c, 0xff, 1},
+ { -1, -1, -1, -1},
+};
+
/* Callback for the most boards */
static struct em28xx_reg_seq default_tuner_gpio[] = {
{EM28XX_R08_GPIO, EM_GPIO_4, EM_GPIO_4, 10},
@@ -1449,6 +1467,33 @@
.gpio = terratec_av350_unmute_gpio,
} },
},
+ [EM2882_BOARD_EVGA_INDTUBE] = {
+ .name = "Evga inDtube",
+ .tuner_type = TUNER_XC2028,
+ .tuner_gpio = default_tuner_gpio,
+ .decoder = EM28XX_TVP5150,
+ .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */
+ .mts_firmware = 1,
+ .has_dvb = 1,
+ .dvb_gpio = evga_indtube_digital,
+ .ir_codes = ir_codes_evga_indtube,
+ .input = { {
+ .type = EM28XX_VMUX_TELEVISION,
+ .vmux = TVP5150_COMPOSITE0,
+ .amux = EM28XX_AMUX_VIDEO,
+ .gpio = evga_indtube_analog,
+ }, {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = TVP5150_COMPOSITE1,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = evga_indtube_analog,
+ }, {
+ .type = EM28XX_VMUX_SVIDEO,
+ .vmux = TVP5150_SVIDEO,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = evga_indtube_analog,
+ } },
+ },
};
const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards);
@@ -1571,6 +1616,7 @@
{0x72cc5a8b, EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2, TUNER_YMEC_TVF_5533MF},
{0x966a0441, EM2880_BOARD_KWORLD_DVB_310U, TUNER_XC2028},
{0x9567eb1a, EM2880_BOARD_EMPIRE_DUAL_TV, TUNER_XC2028},
+ {0xcee44a99, EM2882_BOARD_EVGA_INDTUBE, TUNER_XC2028},
};
/* I2C devicelist hash table for devices with generic USB IDs */
@@ -1834,6 +1880,10 @@
ctl->demod = XC3028_FE_CHINA;
ctl->fname = XC2028_DEFAULT_FIRMWARE;
break;
+ case EM2882_BOARD_EVGA_INDTUBE:
+ ctl->demod = XC3028_FE_CHINA;
+ ctl->fname = XC3028L_DEFAULT_FIRMWARE;
+ break;
default:
ctl->demod = XC3028_FE_OREN538;
}
@@ -2101,6 +2151,12 @@
case EM2880_BOARD_MSI_DIGIVOX_AD:
if (!em28xx_hint_board(dev))
em28xx_set_model(dev);
+
+ /* In cases where we had to use a board hint, the call to
+ em28xx_set_mode() in em28xx_pre_card_setup() was a no-op,
+ so make the call now so the analog GPIOs are set properly
+ before probing the i2c bus. */
+ em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
break;
}
diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c
index 563dd2b..e7b47c8 100644
--- a/drivers/media/video/em28xx/em28xx-dvb.c
+++ b/drivers/media/video/em28xx/em28xx-dvb.c
@@ -445,6 +445,7 @@
}
break;
case EM2883_BOARD_KWORLD_HYBRID_330U:
+ case EM2882_BOARD_EVGA_INDTUBE:
dvb->frontend = dvb_attach(s5h1409_attach,
&em28xx_s5h1409_with_xc3028,
&dev->i2c_adap);
diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c
index 882796e..8fe1bee 100644
--- a/drivers/media/video/em28xx/em28xx-video.c
+++ b/drivers/media/video/em28xx/em28xx-video.c
@@ -687,8 +687,8 @@
{
struct em28xx_fh *fh = priv;
struct em28xx *dev = fh->dev;
- int width = f->fmt.pix.width;
- int height = f->fmt.pix.height;
+ unsigned int width = f->fmt.pix.width;
+ unsigned int height = f->fmt.pix.height;
unsigned int maxw = norm_maxw(dev);
unsigned int maxh = norm_maxh(dev);
unsigned int hscale, vscale;
@@ -701,34 +701,20 @@
return -EINVAL;
}
- /* width must even because of the YUYV format
- height must be even because of interlacing */
- height &= 0xfffe;
- width &= 0xfffe;
-
- if (unlikely(height < 32))
- height = 32;
- if (unlikely(height > maxh))
- height = maxh;
- if (unlikely(width < 48))
- width = 48;
- if (unlikely(width > maxw))
- width = maxw;
-
if (dev->board.is_em2800) {
/* the em2800 can only scale down to 50% */
- if (height % (maxh / 2))
- height = maxh;
- if (width % (maxw / 2))
- width = maxw;
- /* according to empiatech support */
- /* the MaxPacketSize is to small to support */
- /* framesizes larger than 640x480 @ 30 fps */
- /* or 640x576 @ 25 fps. As this would cut */
- /* of a part of the image we prefer */
- /* 360x576 or 360x480 for now */
+ height = height > (3 * maxh / 4) ? maxh : maxh / 2;
+ width = width > (3 * maxw / 4) ? maxw : maxw / 2;
+ /* According to empiatech support the MaxPacketSize is too small
+ * to support framesizes larger than 640x480 @ 30 fps or 640x576
+ * @ 25 fps. As this would cut of a part of the image we prefer
+ * 360x576 or 360x480 for now */
if (width == maxw && height == maxh)
width /= 2;
+ } else {
+ /* width must even because of the YUYV format
+ height must be even because of interlacing */
+ v4l_bound_align_image(&width, 48, maxw, 1, &height, 32, maxh, 1, 0);
}
get_scale(dev, width, height, &hscale, &vscale);
diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h
index 8bf81be..813ce45 100644
--- a/drivers/media/video/em28xx/em28xx.h
+++ b/drivers/media/video/em28xx/em28xx.h
@@ -106,6 +106,7 @@
#define EM2860_BOARD_TERRATEC_GRABBY 67
#define EM2860_BOARD_TERRATEC_AV350 68
#define EM2882_BOARD_KWORLD_ATSC_315U 69
+#define EM2882_BOARD_EVGA_INDTUBE 70
/* Limits minimum and default number of buffers */
#define EM28XX_MIN_BUF 4
diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c
index f7e0355..1e89600 100644
--- a/drivers/media/video/gspca/gspca.c
+++ b/drivers/media/video/gspca/gspca.c
@@ -1042,13 +1042,11 @@
for (i = 0; i < gspca_dev->sd_desc->nctrls; i++) {
if (gspca_dev->ctrl_dis & (1 << i))
continue;
- if (ctrls->qctrl.id < id)
+ if (gspca_dev->sd_desc->ctrls[i].qctrl.id < id)
continue;
- if (ctrls != NULL) {
- if (gspca_dev->sd_desc->ctrls[i].qctrl.id
+ if (ctrls && gspca_dev->sd_desc->ctrls[i].qctrl.id
> ctrls->qctrl.id)
- continue;
- }
+ continue;
ctrls = &gspca_dev->sd_desc->ctrls[i];
}
} else {
diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c
index 188866a..2f6e135 100644
--- a/drivers/media/video/gspca/ov519.c
+++ b/drivers/media/video/gspca/ov519.c
@@ -50,12 +50,18 @@
struct sd {
struct gspca_dev gspca_dev; /* !! must be the first item */
+ __u8 packet_nr;
+
char bridge;
#define BRIDGE_OV511 0
#define BRIDGE_OV511PLUS 1
#define BRIDGE_OV518 2
#define BRIDGE_OV518PLUS 3
#define BRIDGE_OV519 4
+#define BRIDGE_MASK 7
+
+ char invert_led;
+#define BRIDGE_INVERT_LED 8
/* Determined by sensor type */
__u8 sif;
@@ -65,22 +71,25 @@
__u8 colors;
__u8 hflip;
__u8 vflip;
+ __u8 autobrightness;
+ __u8 freq;
__u8 stopped; /* Streaming is temporarily paused */
- __u8 frame_rate; /* current Framerate (OV519 only) */
- __u8 clockdiv; /* clockdiv override for OV519 only */
+ __u8 frame_rate; /* current Framerate */
+ __u8 clockdiv; /* clockdiv override */
char sensor; /* Type of image sensor chip (SEN_*) */
#define SEN_UNKNOWN 0
#define SEN_OV6620 1
#define SEN_OV6630 2
-#define SEN_OV7610 3
-#define SEN_OV7620 4
-#define SEN_OV7640 5
-#define SEN_OV7670 6
-#define SEN_OV76BE 7
-#define SEN_OV8610 8
+#define SEN_OV66308AF 3
+#define SEN_OV7610 4
+#define SEN_OV7620 5
+#define SEN_OV7640 6
+#define SEN_OV7670 7
+#define SEN_OV76BE 8
+#define SEN_OV8610 9
};
/* V4L2 controls supported by the driver */
@@ -94,11 +103,17 @@
static int sd_gethflip(struct gspca_dev *gspca_dev, __s32 *val);
static int sd_setvflip(struct gspca_dev *gspca_dev, __s32 val);
static int sd_getvflip(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setautobrightness(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getautobrightness(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setfreq(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getfreq(struct gspca_dev *gspca_dev, __s32 *val);
static void setbrightness(struct gspca_dev *gspca_dev);
static void setcontrast(struct gspca_dev *gspca_dev);
static void setcolors(struct gspca_dev *gspca_dev);
+static void setautobrightness(struct sd *sd);
+static void setfreq(struct sd *sd);
-static struct ctrl sd_ctrls[] = {
+static const struct ctrl sd_ctrls[] = {
{
{
.id = V4L2_CID_BRIGHTNESS,
@@ -141,7 +156,7 @@
.set = sd_setcolors,
.get = sd_getcolors,
},
-/* next controls work with ov7670 only */
+/* The flip controls work with ov7670 only */
#define HFLIP_IDX 3
{
{
@@ -172,6 +187,51 @@
.set = sd_setvflip,
.get = sd_getvflip,
},
+#define AUTOBRIGHT_IDX 5
+ {
+ {
+ .id = V4L2_CID_AUTOBRIGHTNESS,
+ .type = V4L2_CTRL_TYPE_BOOLEAN,
+ .name = "Auto Brightness",
+ .minimum = 0,
+ .maximum = 1,
+ .step = 1,
+#define AUTOBRIGHT_DEF 1
+ .default_value = AUTOBRIGHT_DEF,
+ },
+ .set = sd_setautobrightness,
+ .get = sd_getautobrightness,
+ },
+#define FREQ_IDX 6
+ {
+ {
+ .id = V4L2_CID_POWER_LINE_FREQUENCY,
+ .type = V4L2_CTRL_TYPE_MENU,
+ .name = "Light frequency filter",
+ .minimum = 0,
+ .maximum = 2, /* 0: 0, 1: 50Hz, 2:60Hz */
+ .step = 1,
+#define FREQ_DEF 0
+ .default_value = FREQ_DEF,
+ },
+ .set = sd_setfreq,
+ .get = sd_getfreq,
+ },
+#define OV7670_FREQ_IDX 7
+ {
+ {
+ .id = V4L2_CID_POWER_LINE_FREQUENCY,
+ .type = V4L2_CTRL_TYPE_MENU,
+ .name = "Light frequency filter",
+ .minimum = 0,
+ .maximum = 3, /* 0: 0, 1: 50Hz, 2:60Hz 3: Auto Hz */
+ .step = 1,
+#define OV7670_FREQ_DEF 3
+ .default_value = OV7670_FREQ_DEF,
+ },
+ .set = sd_setfreq,
+ .get = sd_getfreq,
+ },
};
static const struct v4l2_pix_format ov519_vga_mode[] = {
@@ -187,11 +247,21 @@
.priv = 0},
};
static const struct v4l2_pix_format ov519_sif_mode[] = {
+ {160, 120, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+ .bytesperline = 160,
+ .sizeimage = 160 * 120 * 3 / 8 + 590,
+ .colorspace = V4L2_COLORSPACE_JPEG,
+ .priv = 3},
{176, 144, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
.bytesperline = 176,
.sizeimage = 176 * 144 * 3 / 8 + 590,
.colorspace = V4L2_COLORSPACE_JPEG,
.priv = 1},
+ {320, 240, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+ .bytesperline = 320,
+ .sizeimage = 320 * 240 * 3 / 8 + 590,
+ .colorspace = V4L2_COLORSPACE_JPEG,
+ .priv = 2},
{352, 288, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
.bytesperline = 352,
.sizeimage = 352 * 288 * 3 / 8 + 590,
@@ -199,42 +269,118 @@
.priv = 0},
};
+/* Note some of the sizeimage values for the ov511 / ov518 may seem
+ larger then necessary, however they need to be this big as the ov511 /
+ ov518 always fills the entire isoc frame, using 0 padding bytes when
+ it doesn't have any data. So with low framerates the amount of data
+ transfered can become quite large (libv4l will remove all the 0 padding
+ in userspace). */
static const struct v4l2_pix_format ov518_vga_mode[] = {
{320, 240, V4L2_PIX_FMT_OV518, V4L2_FIELD_NONE,
.bytesperline = 320,
- .sizeimage = 320 * 240 * 3 / 8 + 590,
+ .sizeimage = 320 * 240 * 3,
.colorspace = V4L2_COLORSPACE_JPEG,
.priv = 1},
{640, 480, V4L2_PIX_FMT_OV518, V4L2_FIELD_NONE,
.bytesperline = 640,
- .sizeimage = 640 * 480 * 3 / 8 + 590,
+ .sizeimage = 640 * 480 * 2,
.colorspace = V4L2_COLORSPACE_JPEG,
.priv = 0},
};
static const struct v4l2_pix_format ov518_sif_mode[] = {
+ {160, 120, V4L2_PIX_FMT_OV518, V4L2_FIELD_NONE,
+ .bytesperline = 160,
+ .sizeimage = 70000,
+ .colorspace = V4L2_COLORSPACE_JPEG,
+ .priv = 3},
{176, 144, V4L2_PIX_FMT_OV518, V4L2_FIELD_NONE,
.bytesperline = 176,
- .sizeimage = 40000,
+ .sizeimage = 70000,
.colorspace = V4L2_COLORSPACE_JPEG,
.priv = 1},
+ {320, 240, V4L2_PIX_FMT_OV518, V4L2_FIELD_NONE,
+ .bytesperline = 320,
+ .sizeimage = 320 * 240 * 3,
+ .colorspace = V4L2_COLORSPACE_JPEG,
+ .priv = 2},
{352, 288, V4L2_PIX_FMT_OV518, V4L2_FIELD_NONE,
.bytesperline = 352,
- .sizeimage = 352 * 288 * 3 / 8 + 590,
+ .sizeimage = 352 * 288 * 3,
.colorspace = V4L2_COLORSPACE_JPEG,
.priv = 0},
};
+static const struct v4l2_pix_format ov511_vga_mode[] = {
+ {320, 240, V4L2_PIX_FMT_OV511, V4L2_FIELD_NONE,
+ .bytesperline = 320,
+ .sizeimage = 320 * 240 * 3,
+ .colorspace = V4L2_COLORSPACE_JPEG,
+ .priv = 1},
+ {640, 480, V4L2_PIX_FMT_OV511, V4L2_FIELD_NONE,
+ .bytesperline = 640,
+ .sizeimage = 640 * 480 * 2,
+ .colorspace = V4L2_COLORSPACE_JPEG,
+ .priv = 0},
+};
+static const struct v4l2_pix_format ov511_sif_mode[] = {
+ {160, 120, V4L2_PIX_FMT_OV511, V4L2_FIELD_NONE,
+ .bytesperline = 160,
+ .sizeimage = 70000,
+ .colorspace = V4L2_COLORSPACE_JPEG,
+ .priv = 3},
+ {176, 144, V4L2_PIX_FMT_OV511, V4L2_FIELD_NONE,
+ .bytesperline = 176,
+ .sizeimage = 70000,
+ .colorspace = V4L2_COLORSPACE_JPEG,
+ .priv = 1},
+ {320, 240, V4L2_PIX_FMT_OV511, V4L2_FIELD_NONE,
+ .bytesperline = 320,
+ .sizeimage = 320 * 240 * 3,
+ .colorspace = V4L2_COLORSPACE_JPEG,
+ .priv = 2},
+ {352, 288, V4L2_PIX_FMT_OV511, V4L2_FIELD_NONE,
+ .bytesperline = 352,
+ .sizeimage = 352 * 288 * 3,
+ .colorspace = V4L2_COLORSPACE_JPEG,
+ .priv = 0},
+};
/* Registers common to OV511 / OV518 */
+#define R51x_FIFO_PSIZE 0x30 /* 2 bytes wide w/ OV518(+) */
#define R51x_SYS_RESET 0x50
+ /* Reset type flags */
+ #define OV511_RESET_OMNICE 0x08
#define R51x_SYS_INIT 0x53
#define R51x_SYS_SNAP 0x52
#define R51x_SYS_CUST_ID 0x5F
#define R51x_COMP_LUT_BEGIN 0x80
/* OV511 Camera interface register numbers */
+#define R511_CAM_DELAY 0x10
+#define R511_CAM_EDGE 0x11
+#define R511_CAM_PXCNT 0x12
+#define R511_CAM_LNCNT 0x13
+#define R511_CAM_PXDIV 0x14
+#define R511_CAM_LNDIV 0x15
+#define R511_CAM_UV_EN 0x16
+#define R511_CAM_LINE_MODE 0x17
+#define R511_CAM_OPTS 0x18
+
+#define R511_SNAP_FRAME 0x19
+#define R511_SNAP_PXCNT 0x1A
+#define R511_SNAP_LNCNT 0x1B
+#define R511_SNAP_PXDIV 0x1C
+#define R511_SNAP_LNDIV 0x1D
+#define R511_SNAP_UV_EN 0x1E
+#define R511_SNAP_UV_EN 0x1E
+#define R511_SNAP_OPTS 0x1F
+
+#define R511_DRAM_FLOW_CTL 0x20
+#define R511_FIFO_OPTS 0x31
+#define R511_I2C_CTL 0x40
#define R511_SYS_LED_CTL 0x55 /* OV511+ only */
-#define OV511_RESET_NOREGS 0x3F /* All but OV511 & regs */
+#define R511_COMP_EN 0x78
+#define R511_COMP_LUT_EN 0x79
/* OV518 Camera interface register numbers */
#define R518_GPIO_OUT 0x56 /* OV518(+) only */
@@ -383,7 +529,7 @@
{ 0x28, 0x05 },
{ 0x2a, 0x04 }, /* Disable framerate adjust */
/* { 0x2b, 0xac }, * Framerate; Set 2a[7] first */
- { 0x2d, 0x99 },
+ { 0x2d, 0x85 },
{ 0x33, 0xa0 }, /* Color Processing Parameter */
{ 0x34, 0xd2 }, /* Max A/D range */
{ 0x38, 0x8b },
@@ -416,7 +562,7 @@
{ 0x07, 0x2d }, /* Sharpness */
{ 0x0c, 0x20 },
{ 0x0d, 0x20 },
- { 0x0e, 0x20 },
+ { 0x0e, 0xa0 }, /* Was 0x20, bit7 enables a 2x gain which we need */
{ 0x0f, 0x05 },
{ 0x10, 0x9a },
{ 0x11, 0x00 }, /* Pixel clock = fastest */
@@ -558,7 +704,7 @@
{ 0x23, 0x00 },
{ 0x26, 0xa2 },
{ 0x27, 0xea },
- { 0x28, 0x20 },
+ { 0x28, 0x22 }, /* Was 0x20, bit1 enables a 2x gain which we need */
{ 0x29, 0x00 },
{ 0x2a, 0x10 },
{ 0x2b, 0x00 },
@@ -999,13 +1145,128 @@
return ret;
}
+static int ov511_i2c_w(struct sd *sd, __u8 reg, __u8 value)
+{
+ int rc, retries;
+
+ PDEBUG(D_USBO, "i2c 0x%02x -> [0x%02x]", value, reg);
+
+ /* Three byte write cycle */
+ for (retries = 6; ; ) {
+ /* Select camera register */
+ rc = reg_w(sd, R51x_I2C_SADDR_3, reg);
+ if (rc < 0)
+ return rc;
+
+ /* Write "value" to I2C data port of OV511 */
+ rc = reg_w(sd, R51x_I2C_DATA, value);
+ if (rc < 0)
+ return rc;
+
+ /* Initiate 3-byte write cycle */
+ rc = reg_w(sd, R511_I2C_CTL, 0x01);
+ if (rc < 0)
+ return rc;
+
+ do
+ rc = reg_r(sd, R511_I2C_CTL);
+ while (rc > 0 && ((rc & 1) == 0)); /* Retry until idle */
+
+ if (rc < 0)
+ return rc;
+
+ if ((rc & 2) == 0) /* Ack? */
+ break;
+ if (--retries < 0) {
+ PDEBUG(D_USBO, "i2c write retries exhausted");
+ return -1;
+ }
+ }
+
+ return 0;
+}
+
+static int ov511_i2c_r(struct sd *sd, __u8 reg)
+{
+ int rc, value, retries;
+
+ /* Two byte write cycle */
+ for (retries = 6; ; ) {
+ /* Select camera register */
+ rc = reg_w(sd, R51x_I2C_SADDR_2, reg);
+ if (rc < 0)
+ return rc;
+
+ /* Initiate 2-byte write cycle */
+ rc = reg_w(sd, R511_I2C_CTL, 0x03);
+ if (rc < 0)
+ return rc;
+
+ do
+ rc = reg_r(sd, R511_I2C_CTL);
+ while (rc > 0 && ((rc & 1) == 0)); /* Retry until idle */
+
+ if (rc < 0)
+ return rc;
+
+ if ((rc & 2) == 0) /* Ack? */
+ break;
+
+ /* I2C abort */
+ reg_w(sd, R511_I2C_CTL, 0x10);
+
+ if (--retries < 0) {
+ PDEBUG(D_USBI, "i2c write retries exhausted");
+ return -1;
+ }
+ }
+
+ /* Two byte read cycle */
+ for (retries = 6; ; ) {
+ /* Initiate 2-byte read cycle */
+ rc = reg_w(sd, R511_I2C_CTL, 0x05);
+ if (rc < 0)
+ return rc;
+
+ do
+ rc = reg_r(sd, R511_I2C_CTL);
+ while (rc > 0 && ((rc & 1) == 0)); /* Retry until idle */
+
+ if (rc < 0)
+ return rc;
+
+ if ((rc & 2) == 0) /* Ack? */
+ break;
+
+ /* I2C abort */
+ rc = reg_w(sd, R511_I2C_CTL, 0x10);
+ if (rc < 0)
+ return rc;
+
+ if (--retries < 0) {
+ PDEBUG(D_USBI, "i2c read retries exhausted");
+ return -1;
+ }
+ }
+
+ value = reg_r(sd, R51x_I2C_DATA);
+
+ PDEBUG(D_USBI, "i2c [0x%02X] -> 0x%02X", reg, value);
+
+ /* This is needed to make i2c_w() work */
+ rc = reg_w(sd, R511_I2C_CTL, 0x05);
+ if (rc < 0)
+ return rc;
+
+ return value;
+}
/*
* The OV518 I2C I/O procedure is different, hence, this function.
* This is normally only called from i2c_w(). Note that this function
* always succeeds regardless of whether the sensor is present and working.
*/
-static int i2c_w(struct sd *sd,
+static int ov518_i2c_w(struct sd *sd,
__u8 reg,
__u8 value)
{
@@ -1040,7 +1301,7 @@
* This is normally only called from i2c_r(). Note that this function
* always succeeds regardless of whether the sensor is present and working.
*/
-static int i2c_r(struct sd *sd, __u8 reg)
+static int ov518_i2c_r(struct sd *sd, __u8 reg)
{
int rc, value;
@@ -1063,6 +1324,34 @@
return value;
}
+static int i2c_w(struct sd *sd, __u8 reg, __u8 value)
+{
+ switch (sd->bridge) {
+ case BRIDGE_OV511:
+ case BRIDGE_OV511PLUS:
+ return ov511_i2c_w(sd, reg, value);
+ case BRIDGE_OV518:
+ case BRIDGE_OV518PLUS:
+ case BRIDGE_OV519:
+ return ov518_i2c_w(sd, reg, value);
+ }
+ return -1; /* Should never happen */
+}
+
+static int i2c_r(struct sd *sd, __u8 reg)
+{
+ switch (sd->bridge) {
+ case BRIDGE_OV511:
+ case BRIDGE_OV511PLUS:
+ return ov511_i2c_r(sd, reg);
+ case BRIDGE_OV518:
+ case BRIDGE_OV518PLUS:
+ case BRIDGE_OV519:
+ return ov518_i2c_r(sd, reg);
+ }
+ return -1; /* Should never happen */
+}
+
/* Writes bits at positions specified by mask to an I2C reg. Bits that are in
* the same position as 1's in "mask" are cleared and set to "value". Bits
* that are in the same position as 0's in "mask" are preserved, regardless
@@ -1242,7 +1531,6 @@
}
/* Set sensor-specific vars */
-/* sd->sif = 0; already done */
return 0;
}
@@ -1279,15 +1567,13 @@
}
} else if ((rc & 3) == 1) {
/* I don't know what's different about the 76BE yet. */
- if (i2c_r(sd, 0x15) & 1)
+ if (i2c_r(sd, 0x15) & 1) {
PDEBUG(D_PROBE, "Sensor is an OV7620AE");
- else
+ sd->sensor = SEN_OV7620;
+ } else {
PDEBUG(D_PROBE, "Sensor is an OV76BE");
-
- /* OV511+ will return all zero isoc data unless we
- * configure the sensor as a 7620. Someone needs to
- * find the exact reg. setting that causes this. */
- sd->sensor = SEN_OV76BE;
+ sd->sensor = SEN_OV76BE;
+ }
} else if ((rc & 3) == 0) {
/* try to read product id registers */
high = i2c_r(sd, 0x0a);
@@ -1333,7 +1619,6 @@
}
/* Set sensor-specific vars */
-/* sd->sif = 0; already done */
return 0;
}
@@ -1362,13 +1647,14 @@
break;
case 0x01:
sd->sensor = SEN_OV6620;
+ PDEBUG(D_PROBE, "Sensor is an OV6620");
break;
case 0x02:
sd->sensor = SEN_OV6630;
PDEBUG(D_PROBE, "Sensor is an OV66308AE");
break;
case 0x03:
- sd->sensor = SEN_OV6630;
+ sd->sensor = SEN_OV66308AF;
PDEBUG(D_PROBE, "Sensor is an OV66308AF");
break;
case 0x90:
@@ -1391,6 +1677,9 @@
/* Turns on or off the LED. Only has an effect with OV511+/OV518(+)/OV519 */
static void ov51x_led_control(struct sd *sd, int on)
{
+ if (sd->invert_led)
+ on = !on;
+
switch (sd->bridge) {
/* OV511 has no LED control */
case BRIDGE_OV511PLUS:
@@ -1406,9 +1695,31 @@
}
}
-/* OV518 quantization tables are 8x4 (instead of 8x8) */
-static int ov518_upload_quan_tables(struct sd *sd)
+static int ov51x_upload_quan_tables(struct sd *sd)
{
+ const unsigned char yQuanTable511[] = {
+ 0, 1, 1, 2, 2, 3, 3, 4,
+ 1, 1, 1, 2, 2, 3, 4, 4,
+ 1, 1, 2, 2, 3, 4, 4, 4,
+ 2, 2, 2, 3, 4, 4, 4, 4,
+ 2, 2, 3, 4, 4, 5, 5, 5,
+ 3, 3, 4, 4, 5, 5, 5, 5,
+ 3, 4, 4, 4, 5, 5, 5, 5,
+ 4, 4, 4, 4, 5, 5, 5, 5
+ };
+
+ const unsigned char uvQuanTable511[] = {
+ 0, 2, 2, 3, 4, 4, 4, 4,
+ 2, 2, 2, 4, 4, 4, 4, 4,
+ 2, 2, 3, 4, 4, 4, 4, 4,
+ 3, 4, 4, 4, 4, 4, 4, 4,
+ 4, 4, 4, 4, 4, 4, 4, 4,
+ 4, 4, 4, 4, 4, 4, 4, 4,
+ 4, 4, 4, 4, 4, 4, 4, 4,
+ 4, 4, 4, 4, 4, 4, 4, 4
+ };
+
+ /* OV518 quantization tables are 8x4 (instead of 8x8) */
const unsigned char yQuanTable518[] = {
5, 4, 5, 6, 6, 7, 7, 7,
5, 5, 5, 5, 6, 7, 7, 7,
@@ -1423,14 +1734,23 @@
7, 7, 7, 7, 7, 7, 8, 8
};
- const unsigned char *pYTable = yQuanTable518;
- const unsigned char *pUVTable = uvQuanTable518;
+ const unsigned char *pYTable, *pUVTable;
unsigned char val0, val1;
- int i, rc, reg = R51x_COMP_LUT_BEGIN;
+ int i, size, rc, reg = R51x_COMP_LUT_BEGIN;
PDEBUG(D_PROBE, "Uploading quantization tables");
- for (i = 0; i < 16; i++) {
+ if (sd->bridge == BRIDGE_OV511 || sd->bridge == BRIDGE_OV511PLUS) {
+ pYTable = yQuanTable511;
+ pUVTable = uvQuanTable511;
+ size = 32;
+ } else {
+ pYTable = yQuanTable518;
+ pUVTable = uvQuanTable518;
+ size = 16;
+ }
+
+ for (i = 0; i < size; i++) {
val0 = *pYTable++;
val1 = *pYTable++;
val0 &= 0x0f;
@@ -1445,7 +1765,7 @@
val0 &= 0x0f;
val1 &= 0x0f;
val0 |= val1 << 4;
- rc = reg_w(sd, reg + 16, val0);
+ rc = reg_w(sd, reg + size, val0);
if (rc < 0)
return rc;
@@ -1455,6 +1775,87 @@
return 0;
}
+/* This initializes the OV511/OV511+ and the sensor */
+static int ov511_configure(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ int rc;
+
+ /* For 511 and 511+ */
+ const struct ov_regvals init_511[] = {
+ { R51x_SYS_RESET, 0x7f },
+ { R51x_SYS_INIT, 0x01 },
+ { R51x_SYS_RESET, 0x7f },
+ { R51x_SYS_INIT, 0x01 },
+ { R51x_SYS_RESET, 0x3f },
+ { R51x_SYS_INIT, 0x01 },
+ { R51x_SYS_RESET, 0x3d },
+ };
+
+ const struct ov_regvals norm_511[] = {
+ { R511_DRAM_FLOW_CTL, 0x01 },
+ { R51x_SYS_SNAP, 0x00 },
+ { R51x_SYS_SNAP, 0x02 },
+ { R51x_SYS_SNAP, 0x00 },
+ { R511_FIFO_OPTS, 0x1f },
+ { R511_COMP_EN, 0x00 },
+ { R511_COMP_LUT_EN, 0x03 },
+ };
+
+ const struct ov_regvals norm_511_p[] = {
+ { R511_DRAM_FLOW_CTL, 0xff },
+ { R51x_SYS_SNAP, 0x00 },
+ { R51x_SYS_SNAP, 0x02 },
+ { R51x_SYS_SNAP, 0x00 },
+ { R511_FIFO_OPTS, 0xff },
+ { R511_COMP_EN, 0x00 },
+ { R511_COMP_LUT_EN, 0x03 },
+ };
+
+ const struct ov_regvals compress_511[] = {
+ { 0x70, 0x1f },
+ { 0x71, 0x05 },
+ { 0x72, 0x06 },
+ { 0x73, 0x06 },
+ { 0x74, 0x14 },
+ { 0x75, 0x03 },
+ { 0x76, 0x04 },
+ { 0x77, 0x04 },
+ };
+
+ PDEBUG(D_PROBE, "Device custom id %x", reg_r(sd, R51x_SYS_CUST_ID));
+
+ rc = write_regvals(sd, init_511, ARRAY_SIZE(init_511));
+ if (rc < 0)
+ return rc;
+
+ switch (sd->bridge) {
+ case BRIDGE_OV511:
+ rc = write_regvals(sd, norm_511, ARRAY_SIZE(norm_511));
+ if (rc < 0)
+ return rc;
+ break;
+ case BRIDGE_OV511PLUS:
+ rc = write_regvals(sd, norm_511_p, ARRAY_SIZE(norm_511_p));
+ if (rc < 0)
+ return rc;
+ break;
+ }
+
+ /* Init compression */
+ rc = write_regvals(sd, compress_511, ARRAY_SIZE(compress_511));
+ if (rc < 0)
+ return rc;
+
+ rc = ov51x_upload_quan_tables(sd);
+ if (rc < 0) {
+ PDEBUG(D_ERR, "Error uploading quantization tables");
+ return rc;
+ }
+
+ return 0;
+}
+
/* This initializes the OV518/OV518+ and the sensor */
static int ov518_configure(struct gspca_dev *gspca_dev)
{
@@ -1462,7 +1863,7 @@
int rc;
/* For 518 and 518+ */
- static struct ov_regvals init_518[] = {
+ const struct ov_regvals init_518[] = {
{ R51x_SYS_RESET, 0x40 },
{ R51x_SYS_INIT, 0xe1 },
{ R51x_SYS_RESET, 0x3e },
@@ -1473,7 +1874,7 @@
{ 0x5d, 0x03 },
};
- static struct ov_regvals norm_518[] = {
+ const struct ov_regvals norm_518[] = {
{ R51x_SYS_SNAP, 0x02 }, /* Reset */
{ R51x_SYS_SNAP, 0x01 }, /* Enable */
{ 0x31, 0x0f },
@@ -1486,7 +1887,7 @@
{ 0x2f, 0x80 },
};
- static struct ov_regvals norm_518_p[] = {
+ const struct ov_regvals norm_518_p[] = {
{ R51x_SYS_SNAP, 0x02 }, /* Reset */
{ R51x_SYS_SNAP, 0x01 }, /* Enable */
{ 0x31, 0x0f },
@@ -1531,7 +1932,7 @@
break;
}
- rc = ov518_upload_quan_tables(sd);
+ rc = ov51x_upload_quan_tables(sd);
if (rc < 0) {
PDEBUG(D_ERR, "Error uploading quantization tables");
return rc;
@@ -1573,9 +1974,14 @@
struct cam *cam;
int ret = 0;
- sd->bridge = id->driver_info;
+ sd->bridge = id->driver_info & BRIDGE_MASK;
+ sd->invert_led = id->driver_info & BRIDGE_INVERT_LED;
switch (sd->bridge) {
+ case BRIDGE_OV511:
+ case BRIDGE_OV511PLUS:
+ ret = ov511_configure(gspca_dev);
+ break;
case BRIDGE_OV518:
case BRIDGE_OV518PLUS:
ret = ov518_configure(gspca_dev);
@@ -1634,6 +2040,16 @@
cam = &gspca_dev->cam;
switch (sd->bridge) {
+ case BRIDGE_OV511:
+ case BRIDGE_OV511PLUS:
+ if (!sd->sif) {
+ cam->cam_mode = ov511_vga_mode;
+ cam->nmodes = ARRAY_SIZE(ov511_vga_mode);
+ } else {
+ cam->cam_mode = ov511_sif_mode;
+ cam->nmodes = ARRAY_SIZE(ov511_sif_mode);
+ }
+ break;
case BRIDGE_OV518:
case BRIDGE_OV518PLUS:
if (!sd->sif) {
@@ -1655,13 +2071,28 @@
break;
}
sd->brightness = BRIGHTNESS_DEF;
- sd->contrast = CONTRAST_DEF;
+ if (sd->sensor == SEN_OV6630 || sd->sensor == SEN_OV66308AF)
+ sd->contrast = 200; /* The default is too low for the ov6630 */
+ else
+ sd->contrast = CONTRAST_DEF;
sd->colors = COLOR_DEF;
sd->hflip = HFLIP_DEF;
sd->vflip = VFLIP_DEF;
- if (sd->sensor != SEN_OV7670)
- gspca_dev->ctrl_dis = (1 << HFLIP_IDX)
- | (1 << VFLIP_IDX);
+ sd->autobrightness = AUTOBRIGHT_DEF;
+ if (sd->sensor == SEN_OV7670) {
+ sd->freq = OV7670_FREQ_DEF;
+ gspca_dev->ctrl_dis = 1 << FREQ_IDX;
+ } else {
+ sd->freq = FREQ_DEF;
+ gspca_dev->ctrl_dis = (1 << HFLIP_IDX) | (1 << VFLIP_IDX) |
+ (1 << OV7670_FREQ_IDX);
+ }
+ if (sd->sensor == SEN_OV7640 || sd->sensor == SEN_OV7670)
+ gspca_dev->ctrl_dis |= 1 << AUTOBRIGHT_IDX;
+ /* OV8610 Frequency filter control should work but needs testing */
+ if (sd->sensor == SEN_OV8610)
+ gspca_dev->ctrl_dis |= 1 << FREQ_IDX;
+
return 0;
error:
PDEBUG(D_ERR, "OV519 Config failed");
@@ -1680,6 +2111,7 @@
return -EIO;
break;
case SEN_OV6630:
+ case SEN_OV66308AF:
if (write_i2c_regvals(sd, norm_6x30, ARRAY_SIZE(norm_6x30)))
return -EIO;
break;
@@ -1688,6 +2120,8 @@
/* case SEN_OV76BE: */
if (write_i2c_regvals(sd, norm_7610, ARRAY_SIZE(norm_7610)))
return -EIO;
+ if (i2c_w_mask(sd, 0x0e, 0x00, 0x40))
+ return -EIO;
break;
case SEN_OV7620:
if (write_i2c_regvals(sd, norm_7620, ARRAY_SIZE(norm_7620)))
@@ -1709,6 +2143,126 @@
return 0;
}
+/* Set up the OV511/OV511+ with the given image parameters.
+ *
+ * Do not put any sensor-specific code in here (including I2C I/O functions)
+ */
+static int ov511_mode_init_regs(struct sd *sd)
+{
+ int hsegs, vsegs, packet_size, fps, needed;
+ int interlaced = 0;
+ struct usb_host_interface *alt;
+ struct usb_interface *intf;
+
+ intf = usb_ifnum_to_if(sd->gspca_dev.dev, sd->gspca_dev.iface);
+ alt = usb_altnum_to_altsetting(intf, sd->gspca_dev.alt);
+ if (!alt) {
+ PDEBUG(D_ERR, "Couldn't get altsetting");
+ return -EIO;
+ }
+
+ packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize);
+ reg_w(sd, R51x_FIFO_PSIZE, packet_size >> 5);
+
+ reg_w(sd, R511_CAM_UV_EN, 0x01);
+ reg_w(sd, R511_SNAP_UV_EN, 0x01);
+ reg_w(sd, R511_SNAP_OPTS, 0x03);
+
+ /* Here I'm assuming that snapshot size == image size.
+ * I hope that's always true. --claudio
+ */
+ hsegs = (sd->gspca_dev.width >> 3) - 1;
+ vsegs = (sd->gspca_dev.height >> 3) - 1;
+
+ reg_w(sd, R511_CAM_PXCNT, hsegs);
+ reg_w(sd, R511_CAM_LNCNT, vsegs);
+ reg_w(sd, R511_CAM_PXDIV, 0x00);
+ reg_w(sd, R511_CAM_LNDIV, 0x00);
+
+ /* YUV420, low pass filter on */
+ reg_w(sd, R511_CAM_OPTS, 0x03);
+
+ /* Snapshot additions */
+ reg_w(sd, R511_SNAP_PXCNT, hsegs);
+ reg_w(sd, R511_SNAP_LNCNT, vsegs);
+ reg_w(sd, R511_SNAP_PXDIV, 0x00);
+ reg_w(sd, R511_SNAP_LNDIV, 0x00);
+
+ /******** Set the framerate ********/
+ if (frame_rate > 0)
+ sd->frame_rate = frame_rate;
+
+ switch (sd->sensor) {
+ case SEN_OV6620:
+ /* No framerate control, doesn't like higher rates yet */
+ sd->clockdiv = 3;
+ break;
+
+ /* Note once the FIXME's in mode_init_ov_sensor_regs() are fixed
+ for more sensors we need to do this for them too */
+ case SEN_OV7620:
+ case SEN_OV7640:
+ case SEN_OV76BE:
+ if (sd->gspca_dev.width == 320)
+ interlaced = 1;
+ /* Fall through */
+ case SEN_OV6630:
+ case SEN_OV7610:
+ case SEN_OV7670:
+ switch (sd->frame_rate) {
+ case 30:
+ case 25:
+ /* Not enough bandwidth to do 640x480 @ 30 fps */
+ if (sd->gspca_dev.width != 640) {
+ sd->clockdiv = 0;
+ break;
+ }
+ /* Fall through for 640x480 case */
+ default:
+/* case 20: */
+/* case 15: */
+ sd->clockdiv = 1;
+ break;
+ case 10:
+ sd->clockdiv = 2;
+ break;
+ case 5:
+ sd->clockdiv = 5;
+ break;
+ }
+ if (interlaced) {
+ sd->clockdiv = (sd->clockdiv + 1) * 2 - 1;
+ /* Higher then 10 does not work */
+ if (sd->clockdiv > 10)
+ sd->clockdiv = 10;
+ }
+ break;
+
+ case SEN_OV8610:
+ /* No framerate control ?? */
+ sd->clockdiv = 0;
+ break;
+ }
+
+ /* Check if we have enough bandwidth to disable compression */
+ fps = (interlaced ? 60 : 30) / (sd->clockdiv + 1) + 1;
+ needed = fps * sd->gspca_dev.width * sd->gspca_dev.height * 3 / 2;
+ /* 1400 is a conservative estimate of the max nr of isoc packets/sec */
+ if (needed > 1400 * packet_size) {
+ /* Enable Y and UV quantization and compression */
+ reg_w(sd, R511_COMP_EN, 0x07);
+ reg_w(sd, R511_COMP_LUT_EN, 0x03);
+ } else {
+ reg_w(sd, R511_COMP_EN, 0x06);
+ reg_w(sd, R511_COMP_LUT_EN, 0x00);
+ }
+
+ reg_w(sd, R51x_SYS_RESET, OV511_RESET_OMNICE);
+ reg_w(sd, R51x_SYS_RESET, 0);
+
+ return 0;
+}
+
/* Sets up the OV518/OV518+ with the given image parameters
*
* OV518 needs a completely different approach, until we can figure out what
@@ -1718,7 +2272,19 @@
*/
static int ov518_mode_init_regs(struct sd *sd)
{
- int hsegs, vsegs;
+ int hsegs, vsegs, packet_size;
+ struct usb_host_interface *alt;
+ struct usb_interface *intf;
+
+ intf = usb_ifnum_to_if(sd->gspca_dev.dev, sd->gspca_dev.iface);
+ alt = usb_altnum_to_altsetting(intf, sd->gspca_dev.alt);
+ if (!alt) {
+ PDEBUG(D_ERR, "Couldn't get altsetting");
+ return -EIO;
+ }
+
+ packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize);
+ ov518_reg_w32(sd, R51x_FIFO_PSIZE, packet_size & ~7, 2);
/******** Set the mode ********/
@@ -1755,20 +2321,30 @@
/* Windows driver does this here; who knows why */
reg_w(sd, 0x2f, 0x80);
- /******** Set the framerate (to 30 FPS) ********/
- if (sd->bridge == BRIDGE_OV518PLUS)
- sd->clockdiv = 1;
- else
- sd->clockdiv = 0;
+ /******** Set the framerate ********/
+ sd->clockdiv = 1;
/* Mode independent, but framerate dependent, regs */
- reg_w(sd, 0x51, 0x04); /* Clock divider; lower==faster */
+ /* 0x51: Clock divider; Only works on some cams which use 2 crystals */
+ reg_w(sd, 0x51, 0x04);
reg_w(sd, 0x22, 0x18);
reg_w(sd, 0x23, 0xff);
- if (sd->bridge == BRIDGE_OV518PLUS)
- reg_w(sd, 0x21, 0x19);
- else
+ if (sd->bridge == BRIDGE_OV518PLUS) {
+ switch (sd->sensor) {
+ case SEN_OV7620:
+ if (sd->gspca_dev.width == 320) {
+ reg_w(sd, 0x20, 0x00);
+ reg_w(sd, 0x21, 0x19);
+ } else {
+ reg_w(sd, 0x20, 0x60);
+ reg_w(sd, 0x21, 0x1f);
+ }
+ break;
+ default:
+ reg_w(sd, 0x21, 0x19);
+ }
+ } else
reg_w(sd, 0x71, 0x17); /* Compression-related? */
/* FIXME: Sensor-specific */
@@ -1879,7 +2455,11 @@
reg_w(sd, OV519_R10_H_SIZE, sd->gspca_dev.width >> 4);
reg_w(sd, OV519_R11_V_SIZE, sd->gspca_dev.height >> 3);
- reg_w(sd, OV519_R12_X_OFFSETL, 0x00);
+ if (sd->sensor == SEN_OV7670 &&
+ sd->gspca_dev.cam.cam_mode[sd->gspca_dev.curr_mode].priv)
+ reg_w(sd, OV519_R12_X_OFFSETL, 0x04);
+ else
+ reg_w(sd, OV519_R12_X_OFFSETL, 0x00);
reg_w(sd, OV519_R13_X_OFFSETH, 0x00);
reg_w(sd, OV519_R14_Y_OFFSETL, 0x00);
reg_w(sd, OV519_R15_Y_OFFSETH, 0x00);
@@ -1971,7 +2551,7 @@
int qvga;
gspca_dev = &sd->gspca_dev;
- qvga = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv;
+ qvga = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv & 1;
/******** Mode (VGA/QVGA) and sensor specific regs ********/
switch (sd->sensor) {
@@ -1983,21 +2563,16 @@
i2c_w_mask(sd, 0x14, qvga ? 0x20 : 0x00, 0x20);
break;
case SEN_OV7620:
-/* i2c_w(sd, 0x2b, 0x00); */
+ case SEN_OV76BE:
i2c_w_mask(sd, 0x14, qvga ? 0x20 : 0x00, 0x20);
i2c_w_mask(sd, 0x28, qvga ? 0x00 : 0x20, 0x20);
i2c_w(sd, 0x24, qvga ? 0x20 : 0x3a);
i2c_w(sd, 0x25, qvga ? 0x30 : 0x60);
i2c_w_mask(sd, 0x2d, qvga ? 0x40 : 0x00, 0x40);
- i2c_w_mask(sd, 0x67, qvga ? 0xf0 : 0x90, 0xf0);
+ i2c_w_mask(sd, 0x67, qvga ? 0xb0 : 0x90, 0xf0);
i2c_w_mask(sd, 0x74, qvga ? 0x20 : 0x00, 0x20);
break;
- case SEN_OV76BE:
-/* i2c_w(sd, 0x2b, 0x00); */
- i2c_w_mask(sd, 0x14, qvga ? 0x20 : 0x00, 0x20);
- break;
case SEN_OV7640:
-/* i2c_w(sd, 0x2b, 0x00); */
i2c_w_mask(sd, 0x14, qvga ? 0x20 : 0x00, 0x20);
i2c_w_mask(sd, 0x28, qvga ? 0x00 : 0x20, 0x20);
/* i2c_w(sd, 0x24, qvga ? 0x20 : 0x3a); */
@@ -2016,6 +2591,7 @@
break;
case SEN_OV6620:
case SEN_OV6630:
+ case SEN_OV66308AF:
i2c_w_mask(sd, 0x14, qvga ? 0x20 : 0x00, 0x20);
break;
default:
@@ -2023,10 +2599,6 @@
}
/******** Palette-specific regs ********/
- if (sd->sensor == SEN_OV7610 || sd->sensor == SEN_OV76BE) {
- /* not valid on the OV6620/OV7620/6630? */
- i2c_w_mask(sd, 0x0e, 0x00, 0x40);
- }
/* The OV518 needs special treatment. Although both the OV518
* and the OV6630 support a 16-bit video bus, only the 8 bit Y
@@ -2036,25 +2608,12 @@
/* OV7640 is 8-bit only */
- if (sd->sensor != SEN_OV6630 && sd->sensor != SEN_OV7640)
+ if (sd->sensor != SEN_OV6630 && sd->sensor != SEN_OV66308AF &&
+ sd->sensor != SEN_OV7640)
i2c_w_mask(sd, 0x13, 0x00, 0x20);
/******** Clock programming ********/
- /* The OV6620 needs special handling. This prevents the
- * severe banding that normally occurs */
- if (sd->sensor == SEN_OV6620) {
-
- /* Clock down */
- i2c_w(sd, 0x2a, 0x04);
- i2c_w(sd, 0x11, sd->clockdiv);
- i2c_w(sd, 0x2a, 0x84);
- /* This next setting is critical. It seems to improve
- * the gain or the contrast. The "reserved" bits seem
- * to have some effect in this case. */
- i2c_w(sd, 0x2d, 0x85);
- } else {
- i2c_w(sd, 0x11, sd->clockdiv);
- }
+ i2c_w(sd, 0x11, sd->clockdiv);
/******** Special Features ********/
/* no evidence this is possible with OV7670, either */
@@ -2098,13 +2657,14 @@
static int set_ov_sensor_window(struct sd *sd)
{
struct gspca_dev *gspca_dev;
- int qvga;
+ int qvga, crop;
int hwsbase, hwebase, vwsbase, vwebase, hwscale, vwscale;
int ret, hstart, hstop, vstop, vstart;
__u8 v;
gspca_dev = &sd->gspca_dev;
- qvga = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv;
+ qvga = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv & 1;
+ crop = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv & 2;
/* The different sensor ICs handle setting up of window differently.
* IF YOU SET IT WRONG, YOU WILL GET ALL ZERO ISOC DATA FROM OV51x!! */
@@ -2123,14 +2683,19 @@
break;
case SEN_OV6620:
case SEN_OV6630:
+ case SEN_OV66308AF:
hwsbase = 0x38;
hwebase = 0x3a;
vwsbase = 0x05;
vwebase = 0x06;
- if (qvga) {
+ if (sd->sensor == SEN_OV66308AF && qvga)
/* HDG: this fixes U and V getting swapped */
- hwsbase--;
- vwsbase--;
+ hwsbase++;
+ if (crop) {
+ hwsbase += 8;
+ hwebase += 8;
+ vwsbase += 11;
+ vwebase += 11;
}
break;
case SEN_OV7620:
@@ -2155,6 +2720,7 @@
switch (sd->sensor) {
case SEN_OV6620:
case SEN_OV6630:
+ case SEN_OV66308AF:
if (qvga) { /* QCIF */
hwscale = 0;
vwscale = 0;
@@ -2207,7 +2773,7 @@
if (qvga) { /* QVGA from ov7670.c by
* Jonathan Corbet */
hstart = 164;
- hstop = 20;
+ hstop = 28;
vstart = 14;
vstop = 494;
} else { /* VGA */
@@ -2233,7 +2799,6 @@
msleep(10); /* need to sleep between read and write to
* same reg! */
i2c_w(sd, OV7670_REG_VREF, v);
- sethvflip(sd);
} else {
i2c_w(sd, 0x17, hwsbase);
i2c_w(sd, 0x18, hwebase + (sd->gspca_dev.width >> hwscale));
@@ -2250,6 +2815,10 @@
int ret = 0;
switch (sd->bridge) {
+ case BRIDGE_OV511:
+ case BRIDGE_OV511PLUS:
+ ret = ov511_mode_init_regs(sd);
+ break;
case BRIDGE_OV518:
case BRIDGE_OV518PLUS:
ret = ov518_mode_init_regs(sd);
@@ -2268,6 +2837,9 @@
setcontrast(gspca_dev);
setbrightness(gspca_dev);
setcolors(gspca_dev);
+ sethvflip(sd);
+ setautobrightness(sd);
+ setfreq(sd);
ret = ov51x_restart(sd);
if (ret < 0)
@@ -2287,23 +2859,88 @@
ov51x_led_control(sd, 0);
}
+static void ov511_pkt_scan(struct gspca_dev *gspca_dev,
+ struct gspca_frame *frame, /* target */
+ __u8 *in, /* isoc packet */
+ int len) /* iso packet length */
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ /* SOF/EOF packets have 1st to 8th bytes zeroed and the 9th
+ * byte non-zero. The EOF packet has image width/height in the
+ * 10th and 11th bytes. The 9th byte is given as follows:
+ *
+ * bit 7: EOF
+ * 6: compression enabled
+ * 5: 422/420/400 modes
+ * 4: 422/420/400 modes
+ * 3: 1
+ * 2: snapshot button on
+ * 1: snapshot frame
+ * 0: even/odd field
+ */
+ if (!(in[0] | in[1] | in[2] | in[3] | in[4] | in[5] | in[6] | in[7]) &&
+ (in[8] & 0x08)) {
+ if (in[8] & 0x80) {
+ /* Frame end */
+ if ((in[9] + 1) * 8 != gspca_dev->width ||
+ (in[10] + 1) * 8 != gspca_dev->height) {
+ PDEBUG(D_ERR, "Invalid frame size, got: %dx%d,"
+ " requested: %dx%d\n",
+ (in[9] + 1) * 8, (in[10] + 1) * 8,
+ gspca_dev->width, gspca_dev->height);
+ gspca_dev->last_packet_type = DISCARD_PACKET;
+ return;
+ }
+ /* Add 11 byte footer to frame, might be usefull */
+ gspca_frame_add(gspca_dev, LAST_PACKET, frame, in, 11);
+ return;
+ } else {
+ /* Frame start */
+ gspca_frame_add(gspca_dev, FIRST_PACKET, frame, in, 0);
+ sd->packet_nr = 0;
+ }
+ }
+
+ /* Ignore the packet number */
+ len--;
+
+ /* intermediate packet */
+ gspca_frame_add(gspca_dev, INTER_PACKET, frame, in, len);
+}
+
static void ov518_pkt_scan(struct gspca_dev *gspca_dev,
struct gspca_frame *frame, /* target */
__u8 *data, /* isoc packet */
int len) /* iso packet length */
{
- PDEBUG(D_STREAM, "ov518_pkt_scan: %d bytes", len);
-
- if (len & 7) {
- len--;
- PDEBUG(D_STREAM, "packet number: %d\n", (int)data[len]);
- }
+ struct sd *sd = (struct sd *) gspca_dev;
/* A false positive here is likely, until OVT gives me
* the definitive SOF/EOF format */
if ((!(data[0] | data[1] | data[2] | data[3] | data[5])) && data[6]) {
gspca_frame_add(gspca_dev, LAST_PACKET, frame, data, 0);
gspca_frame_add(gspca_dev, FIRST_PACKET, frame, data, 0);
+ sd->packet_nr = 0;
+ }
+
+ if (gspca_dev->last_packet_type == DISCARD_PACKET)
+ return;
+
+ /* Does this device use packet numbers ? */
+ if (len & 7) {
+ len--;
+ if (sd->packet_nr == data[len])
+ sd->packet_nr++;
+ /* The last few packets of the frame (which are all 0's
+ except that they may contain part of the footer), are
+ numbered 0 */
+ else if (sd->packet_nr == 0 || data[len]) {
+ PDEBUG(D_ERR, "Invalid packet nr: %d (expect: %d)",
+ (int)data[len], (int)sd->packet_nr);
+ gspca_dev->last_packet_type = DISCARD_PACKET;
+ return;
+ }
}
/* intermediate packet */
@@ -2364,6 +3001,7 @@
switch (sd->bridge) {
case BRIDGE_OV511:
case BRIDGE_OV511PLUS:
+ ov511_pkt_scan(gspca_dev, frame, data, len);
break;
case BRIDGE_OV518:
case BRIDGE_OV518PLUS:
@@ -2389,13 +3027,13 @@
case SEN_OV76BE:
case SEN_OV6620:
case SEN_OV6630:
+ case SEN_OV66308AF:
case SEN_OV7640:
i2c_w(sd, OV7610_REG_BRT, val);
break;
case SEN_OV7620:
/* 7620 doesn't like manual changes when in auto mode */
-/*fixme
- * if (!sd->auto_brt) */
+ if (!sd->autobrightness)
i2c_w(sd, OV7610_REG_BRT, val);
break;
case SEN_OV7670:
@@ -2418,6 +3056,7 @@
i2c_w(sd, OV7610_REG_CNT, val);
break;
case SEN_OV6630:
+ case SEN_OV66308AF:
i2c_w_mask(sd, OV7610_REG_CNT, val >> 4, 0x0f);
break;
case SEN_OV8610: {
@@ -2462,6 +3101,7 @@
case SEN_OV76BE:
case SEN_OV6620:
case SEN_OV6630:
+ case SEN_OV66308AF:
i2c_w(sd, OV7610_REG_SAT, val);
break;
case SEN_OV7620:
@@ -2482,6 +3122,72 @@
}
}
+static void setautobrightness(struct sd *sd)
+{
+ if (sd->sensor == SEN_OV7640 || sd->sensor == SEN_OV7670)
+ return;
+
+ i2c_w_mask(sd, 0x2d, sd->autobrightness ? 0x10 : 0x00, 0x10);
+}
+
+static void setfreq(struct sd *sd)
+{
+ if (sd->sensor == SEN_OV7670) {
+ switch (sd->freq) {
+ case 0: /* Banding filter disabled */
+ i2c_w_mask(sd, OV7670_REG_COM8, 0, OV7670_COM8_BFILT);
+ break;
+ case 1: /* 50 hz */
+ i2c_w_mask(sd, OV7670_REG_COM8, OV7670_COM8_BFILT,
+ OV7670_COM8_BFILT);
+ i2c_w_mask(sd, OV7670_REG_COM11, 0x08, 0x18);
+ break;
+ case 2: /* 60 hz */
+ i2c_w_mask(sd, OV7670_REG_COM8, OV7670_COM8_BFILT,
+ OV7670_COM8_BFILT);
+ i2c_w_mask(sd, OV7670_REG_COM11, 0x00, 0x18);
+ break;
+ case 3: /* Auto hz */
+ i2c_w_mask(sd, OV7670_REG_COM8, OV7670_COM8_BFILT,
+ OV7670_COM8_BFILT);
+ i2c_w_mask(sd, OV7670_REG_COM11, OV7670_COM11_HZAUTO,
+ 0x18);
+ break;
+ }
+ } else {
+ switch (sd->freq) {
+ case 0: /* Banding filter disabled */
+ i2c_w_mask(sd, 0x2d, 0x00, 0x04);
+ i2c_w_mask(sd, 0x2a, 0x00, 0x80);
+ break;
+ case 1: /* 50 hz (filter on and framerate adj) */
+ i2c_w_mask(sd, 0x2d, 0x04, 0x04);
+ i2c_w_mask(sd, 0x2a, 0x80, 0x80);
+ /* 20 fps -> 16.667 fps */
+ if (sd->sensor == SEN_OV6620 ||
+ sd->sensor == SEN_OV6630 ||
+ sd->sensor == SEN_OV66308AF)
+ i2c_w(sd, 0x2b, 0x5e);
+ else
+ i2c_w(sd, 0x2b, 0xac);
+ break;
+ case 2: /* 60 hz (filter on, ...) */
+ i2c_w_mask(sd, 0x2d, 0x04, 0x04);
+ if (sd->sensor == SEN_OV6620 ||
+ sd->sensor == SEN_OV6630 ||
+ sd->sensor == SEN_OV66308AF) {
+ /* 20 fps -> 15 fps */
+ i2c_w_mask(sd, 0x2a, 0x80, 0x80);
+ i2c_w(sd, 0x2b, 0xa8);
+ } else {
+ /* no framerate adj. */
+ i2c_w_mask(sd, 0x2a, 0x00, 0x80);
+ }
+ break;
+ }
+ }
+}
+
static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val)
{
struct sd *sd = (struct sd *) gspca_dev;
@@ -2572,6 +3278,71 @@
return 0;
}
+static int sd_setautobrightness(struct gspca_dev *gspca_dev, __s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->autobrightness = val;
+ if (gspca_dev->streaming)
+ setautobrightness(sd);
+ return 0;
+}
+
+static int sd_getautobrightness(struct gspca_dev *gspca_dev, __s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ *val = sd->autobrightness;
+ return 0;
+}
+
+static int sd_setfreq(struct gspca_dev *gspca_dev, __s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->freq = val;
+ if (gspca_dev->streaming)
+ setfreq(sd);
+ return 0;
+}
+
+static int sd_getfreq(struct gspca_dev *gspca_dev, __s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ *val = sd->freq;
+ return 0;
+}
+
+static int sd_querymenu(struct gspca_dev *gspca_dev,
+ struct v4l2_querymenu *menu)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ switch (menu->id) {
+ case V4L2_CID_POWER_LINE_FREQUENCY:
+ switch (menu->index) {
+ case 0: /* V4L2_CID_POWER_LINE_FREQUENCY_DISABLED */
+ strcpy((char *) menu->name, "NoFliker");
+ return 0;
+ case 1: /* V4L2_CID_POWER_LINE_FREQUENCY_50HZ */
+ strcpy((char *) menu->name, "50 Hz");
+ return 0;
+ case 2: /* V4L2_CID_POWER_LINE_FREQUENCY_60HZ */
+ strcpy((char *) menu->name, "60 Hz");
+ return 0;
+ case 3:
+ if (sd->sensor != SEN_OV7670)
+ return -EINVAL;
+
+ strcpy((char *) menu->name, "Automatic");
+ return 0;
+ }
+ break;
+ }
+ return -EINVAL;
+}
+
/* sub-driver description */
static const struct sd_desc sd_desc = {
.name = MODULE_NAME,
@@ -2582,6 +3353,7 @@
.start = sd_start,
.stopN = sd_stopN,
.pkt_scan = sd_pkt_scan,
+ .querymenu = sd_querymenu,
};
/* -- module initialisation -- */
@@ -2590,17 +3362,22 @@
{USB_DEVICE(0x041e, 0x405f), .driver_info = BRIDGE_OV519 },
{USB_DEVICE(0x041e, 0x4060), .driver_info = BRIDGE_OV519 },
{USB_DEVICE(0x041e, 0x4061), .driver_info = BRIDGE_OV519 },
- {USB_DEVICE(0x041e, 0x4064), .driver_info = BRIDGE_OV519 },
- {USB_DEVICE(0x041e, 0x4068), .driver_info = BRIDGE_OV519 },
+ {USB_DEVICE(0x041e, 0x4064),
+ .driver_info = BRIDGE_OV519 | BRIDGE_INVERT_LED },
+ {USB_DEVICE(0x041e, 0x4068),
+ .driver_info = BRIDGE_OV519 | BRIDGE_INVERT_LED },
{USB_DEVICE(0x045e, 0x028c), .driver_info = BRIDGE_OV519 },
{USB_DEVICE(0x054c, 0x0154), .driver_info = BRIDGE_OV519 },
{USB_DEVICE(0x054c, 0x0155), .driver_info = BRIDGE_OV519 },
+ {USB_DEVICE(0x05a9, 0x0511), .driver_info = BRIDGE_OV511 },
{USB_DEVICE(0x05a9, 0x0518), .driver_info = BRIDGE_OV518 },
{USB_DEVICE(0x05a9, 0x0519), .driver_info = BRIDGE_OV519 },
{USB_DEVICE(0x05a9, 0x0530), .driver_info = BRIDGE_OV519 },
{USB_DEVICE(0x05a9, 0x4519), .driver_info = BRIDGE_OV519 },
{USB_DEVICE(0x05a9, 0x8519), .driver_info = BRIDGE_OV519 },
+ {USB_DEVICE(0x05a9, 0xa511), .driver_info = BRIDGE_OV511PLUS },
{USB_DEVICE(0x05a9, 0xa518), .driver_info = BRIDGE_OV518PLUS },
+ {USB_DEVICE(0x0813, 0x0002), .driver_info = BRIDGE_OV511PLUS },
{}
};
diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c
index dc6a6f1..0d02f41 100644
--- a/drivers/media/video/gspca/sonixj.c
+++ b/drivers/media/video/gspca/sonixj.c
@@ -46,6 +46,7 @@
u8 gamma;
u8 vflip; /* ov7630/ov7648 only */
u8 infrared; /* mt9v111 only */
+ u8 freq; /* ov76xx only */
u8 quality; /* image quality */
#define QUALITY_MIN 60
#define QUALITY_MAX 95
@@ -96,8 +97,11 @@
static int sd_getvflip(struct gspca_dev *gspca_dev, __s32 *val);
static int sd_setinfrared(struct gspca_dev *gspca_dev, __s32 val);
static int sd_getinfrared(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setfreq(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getfreq(struct gspca_dev *gspca_dev, __s32 *val);
static struct ctrl sd_ctrls[] = {
+#define BRIGHTNESS_IDX 0
{
{
.id = V4L2_CID_BRIGHTNESS,
@@ -113,6 +117,7 @@
.set = sd_setbrightness,
.get = sd_getbrightness,
},
+#define CONTRAST_IDX 1
{
{
.id = V4L2_CID_CONTRAST,
@@ -128,20 +133,22 @@
.set = sd_setcontrast,
.get = sd_getcontrast,
},
+#define COLOR_IDX 2
{
{
.id = V4L2_CID_SATURATION,
.type = V4L2_CTRL_TYPE_INTEGER,
- .name = "Color",
+ .name = "Saturation",
.minimum = 0,
.maximum = 40,
.step = 1,
-#define COLOR_DEF 32
+#define COLOR_DEF 25
.default_value = COLOR_DEF,
},
.set = sd_setcolors,
.get = sd_getcolors,
},
+#define BLUE_BALANCE_IDX 3
{
{
.id = V4L2_CID_BLUE_BALANCE,
@@ -156,6 +163,7 @@
.set = sd_setblue_balance,
.get = sd_getblue_balance,
},
+#define RED_BALANCE_IDX 4
{
{
.id = V4L2_CID_RED_BALANCE,
@@ -170,6 +178,7 @@
.set = sd_setred_balance,
.get = sd_getred_balance,
},
+#define GAMMA_IDX 5
{
{
.id = V4L2_CID_GAMMA,
@@ -184,7 +193,7 @@
.set = sd_setgamma,
.get = sd_getgamma,
},
-#define AUTOGAIN_IDX 5
+#define AUTOGAIN_IDX 6
{
{
.id = V4L2_CID_AUTOGAIN,
@@ -200,7 +209,7 @@
.get = sd_getautogain,
},
/* ov7630/ov7648 only */
-#define VFLIP_IDX 6
+#define VFLIP_IDX 7
{
{
.id = V4L2_CID_VFLIP,
@@ -209,14 +218,14 @@
.minimum = 0,
.maximum = 1,
.step = 1,
-#define VFLIP_DEF 0 /* vflip def = 1 for ov7630 */
+#define VFLIP_DEF 0
.default_value = VFLIP_DEF,
},
.set = sd_setvflip,
.get = sd_getvflip,
},
/* mt9v111 only */
-#define INFRARED_IDX 7
+#define INFRARED_IDX 8
{
{
.id = V4L2_CID_INFRARED,
@@ -231,28 +240,44 @@
.set = sd_setinfrared,
.get = sd_getinfrared,
},
+/* ov7630/ov7648/ov7660 only */
+#define FREQ_IDX 9
+ {
+ {
+ .id = V4L2_CID_POWER_LINE_FREQUENCY,
+ .type = V4L2_CTRL_TYPE_MENU,
+ .name = "Light frequency filter",
+ .minimum = 0,
+ .maximum = 2, /* 0: 0, 1: 50Hz, 2:60Hz */
+ .step = 1,
+#define FREQ_DEF 2
+ .default_value = FREQ_DEF,
+ },
+ .set = sd_setfreq,
+ .get = sd_getfreq,
+ },
};
/* table of the disabled controls */
static __u32 ctrl_dis[] = {
- (1 << INFRARED_IDX) | (1 << VFLIP_IDX),
+ (1 << INFRARED_IDX) | (1 << VFLIP_IDX) | (1 << FREQ_IDX),
/* SENSOR_HV7131R 0 */
- (1 << INFRARED_IDX) | (1 << VFLIP_IDX),
+ (1 << INFRARED_IDX) | (1 << VFLIP_IDX) | (1 << FREQ_IDX),
/* SENSOR_MI0360 1 */
- (1 << INFRARED_IDX) | (1 << VFLIP_IDX),
+ (1 << INFRARED_IDX) | (1 << VFLIP_IDX) | (1 << FREQ_IDX),
/* SENSOR_MO4000 2 */
- (1 << VFLIP_IDX),
+ (1 << VFLIP_IDX) | (1 << FREQ_IDX),
/* SENSOR_MT9V111 3 */
- (1 << INFRARED_IDX) | (1 << VFLIP_IDX),
+ (1 << INFRARED_IDX) | (1 << VFLIP_IDX) | (1 << FREQ_IDX),
/* SENSOR_OM6802 4 */
- (1 << AUTOGAIN_IDX) | (1 << INFRARED_IDX),
+ (1 << INFRARED_IDX),
/* SENSOR_OV7630 5 */
(1 << INFRARED_IDX),
/* SENSOR_OV7648 6 */
(1 << AUTOGAIN_IDX) | (1 << INFRARED_IDX) | (1 << VFLIP_IDX),
/* SENSOR_OV7660 7 */
- (1 << AUTOGAIN_IDX) | (1 << INFRARED_IDX) | (1 << VFLIP_IDX),
- /* SENSOR_SP80708 8 */
+ (1 << AUTOGAIN_IDX) | (1 << INFRARED_IDX) | (1 << VFLIP_IDX) |
+ (1 << FREQ_IDX), /* SENSOR_SP80708 8 */
};
static const struct v4l2_pix_format vga_mode[] = {
@@ -268,7 +293,8 @@
.priv = 1},
{640, 480, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
.bytesperline = 640,
- .sizeimage = 640 * 480 * 3 / 8 + 590,
+ /* Note 3 / 8 is not large enough, not even 5 / 8 is ?! */
+ .sizeimage = 640 * 480 * 3 / 4 + 590,
.colorspace = V4L2_COLORSPACE_JPEG,
.priv = 0},
};
@@ -604,7 +630,9 @@
/* win: i2c_r from 00 to 80 */
{0xd1, 0x21, 0x03, 0x80, 0x10, 0x20, 0x80, 0x10},
{0xb1, 0x21, 0x0c, 0x20, 0x20, 0x00, 0x00, 0x10},
- {0xd1, 0x21, 0x11, 0x00, 0x48, 0xc0, 0x00, 0x10},
+/* HDG: 0x11 was 0x00 change to 0x01 for better exposure (15 fps instead of 30)
+ 0x13 was 0xc0 change to 0xc3 for auto gain and exposure */
+ {0xd1, 0x21, 0x11, 0x01, 0x48, 0xc3, 0x00, 0x10},
{0xb1, 0x21, 0x15, 0x80, 0x03, 0x00, 0x00, 0x10},
{0xd1, 0x21, 0x17, 0x1b, 0xbd, 0x05, 0xf6, 0x10},
{0xa1, 0x21, 0x1b, 0x04, 0x00, 0x00, 0x00, 0x10},
@@ -638,9 +666,8 @@
{0xa1, 0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10},
{0xb1, 0x21, 0x01, 0x80, 0x80, 0x00, 0x00, 0x10},
/* */
- {0xa1, 0x21, 0x11, 0x00, 0x00, 0x00, 0x00, 0x10},
- {0xa1, 0x21, 0x2a, 0x88, 0x00, 0x00, 0x00, 0x10},
- {0xa1, 0x21, 0x2b, 0x34, 0x00, 0x00, 0x00, 0x10},
+/* {0xa1, 0x21, 0x2a, 0x88, 0x00, 0x00, 0x00, 0x10}, * set by setfreq */
+/* {0xa1, 0x21, 0x2b, 0x34, 0x00, 0x00, 0x00, 0x10}, * set by setfreq */
/* */
{0xa1, 0x21, 0x10, 0x83, 0x00, 0x00, 0x00, 0x10},
/* {0xb1, 0x21, 0x01, 0x88, 0x70, 0x00, 0x00, 0x10}, */
@@ -673,7 +700,7 @@
{0xd1, 0x21, 0x21, 0x86, 0x00, 0xde, 0xa0, 0x10},
/* {0xd1, 0x21, 0x25, 0x80, 0x32, 0xfe, 0xa0, 0x10}, jfm done */
/* {0xd1, 0x21, 0x29, 0x00, 0x91, 0x00, 0x88, 0x10}, jfm done */
- {0xb1, 0x21, 0x2d, 0x85, 0x00, 0x00, 0x00, 0x10},
+/* {0xb1, 0x21, 0x2d, 0x85, 0x00, 0x00, 0x00, 0x10}, set by setfreq */
/*...*/
/* {0xa1, 0x21, 0x12, 0x08, 0x00, 0x00, 0x00, 0x10}, jfm done */
/* {0xa1, 0x21, 0x75, 0x06, 0x00, 0x00, 0x00, 0x10}, * COMN
@@ -1294,11 +1321,9 @@
sd->gamma = GAMMA_DEF;
sd->autogain = AUTOGAIN_DEF;
sd->ag_cnt = -1;
- if (sd->sensor != SENSOR_OV7630)
- sd->vflip = 0;
- else
- sd->vflip = 1;
+ sd->vflip = VFLIP_DEF;
sd->infrared = INFRARED_DEF;
+ sd->freq = FREQ_DEF;
sd->quality = QUALITY_DEF;
sd->jpegqual = 80;
@@ -1569,7 +1594,7 @@
else
comb = 0xa0;
if (sd->autogain)
- comb |= 0x02;
+ comb |= 0x03;
i2c_w1(&sd->gspca_dev, 0x13, comb);
return;
}
@@ -1585,12 +1610,15 @@
{
u8 comn;
- if (sd->sensor == SENSOR_OV7630)
+ if (sd->sensor == SENSOR_OV7630) {
comn = 0x02;
- else
+ if (!sd->vflip)
+ comn |= 0x80;
+ } else {
comn = 0x06;
- if (sd->vflip)
- comn |= 0x80;
+ if (sd->vflip)
+ comn |= 0x80;
+ }
i2c_w1(&sd->gspca_dev, 0x75, comn);
}
@@ -1602,6 +1630,58 @@
sd->infrared ? 0x66 : 0x64);
}
+static void setfreq(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ if (sd->sensor == SENSOR_OV7660) {
+ switch (sd->freq) {
+ case 0: /* Banding filter disabled */
+ i2c_w1(gspca_dev, 0x13, 0xdf);
+ break;
+ case 1: /* 50 hz */
+ i2c_w1(gspca_dev, 0x13, 0xff);
+ i2c_w1(gspca_dev, 0x3b, 0x0a);
+ break;
+ case 2: /* 60 hz */
+ i2c_w1(gspca_dev, 0x13, 0xff);
+ i2c_w1(gspca_dev, 0x3b, 0x02);
+ break;
+ }
+ } else {
+ u8 reg2a = 0, reg2b = 0, reg2d = 0;
+
+ /* Get reg2a / reg2d base values */
+ switch (sd->sensor) {
+ case SENSOR_OV7630:
+ reg2a = 0x08;
+ reg2d = 0x01;
+ break;
+ case SENSOR_OV7648:
+ reg2a = 0x11;
+ reg2d = 0x81;
+ break;
+ }
+
+ switch (sd->freq) {
+ case 0: /* Banding filter disabled */
+ break;
+ case 1: /* 50 hz (filter on and framerate adj) */
+ reg2a |= 0x80;
+ reg2b = 0xac;
+ reg2d |= 0x04;
+ break;
+ case 2: /* 60 hz (filter on, no framerate adj) */
+ reg2a |= 0x80;
+ reg2d |= 0x04;
+ break;
+ }
+ i2c_w1(gspca_dev, 0x2a, reg2a);
+ i2c_w1(gspca_dev, 0x2b, reg2b);
+ i2c_w1(gspca_dev, 0x2d, reg2d);
+ }
+}
+
static void setjpegqual(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
@@ -1828,6 +1908,7 @@
setbrightness(gspca_dev);
setcontrast(gspca_dev);
setautogain(gspca_dev);
+ setfreq(gspca_dev);
return 0;
}
@@ -2131,6 +2212,24 @@
return 0;
}
+static int sd_setfreq(struct gspca_dev *gspca_dev, __s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->freq = val;
+ if (gspca_dev->streaming)
+ setfreq(gspca_dev);
+ return 0;
+}
+
+static int sd_getfreq(struct gspca_dev *gspca_dev, __s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ *val = sd->freq;
+ return 0;
+}
+
static int sd_set_jcomp(struct gspca_dev *gspca_dev,
struct v4l2_jpegcompression *jcomp)
{
@@ -2159,6 +2258,27 @@
return 0;
}
+static int sd_querymenu(struct gspca_dev *gspca_dev,
+ struct v4l2_querymenu *menu)
+{
+ switch (menu->id) {
+ case V4L2_CID_POWER_LINE_FREQUENCY:
+ switch (menu->index) {
+ case 0: /* V4L2_CID_POWER_LINE_FREQUENCY_DISABLED */
+ strcpy((char *) menu->name, "NoFliker");
+ return 0;
+ case 1: /* V4L2_CID_POWER_LINE_FREQUENCY_50HZ */
+ strcpy((char *) menu->name, "50 Hz");
+ return 0;
+ case 2: /* V4L2_CID_POWER_LINE_FREQUENCY_60HZ */
+ strcpy((char *) menu->name, "60 Hz");
+ return 0;
+ }
+ break;
+ }
+ return -EINVAL;
+}
+
/* sub-driver description */
static const struct sd_desc sd_desc = {
.name = MODULE_NAME,
@@ -2173,6 +2293,7 @@
.dq_callback = do_autogain,
.get_jcomp = sd_get_jcomp,
.set_jcomp = sd_set_jcomp,
+ .querymenu = sd_querymenu,
};
/* -- module initialisation -- */
@@ -2233,7 +2354,7 @@
{USB_DEVICE(0x0c45, 0x613b), BSI(SN9C120, OV7660, 0x21)},
#endif
{USB_DEVICE(0x0c45, 0x613c), BSI(SN9C120, HV7131R, 0x11)},
-/* {USB_DEVICE(0x0c45, 0x613e), BSI(SN9C120, OV7630, 0x??)}, */
+ {USB_DEVICE(0x0c45, 0x613e), BSI(SN9C120, OV7630, 0x21)},
{USB_DEVICE(0x0c45, 0x6143), BSI(SN9C120, SP80708, 0x18)},
{}
};
diff --git a/drivers/media/video/gspca/stv06xx/Makefile b/drivers/media/video/gspca/stv06xx/Makefile
index feeaa94..2f3c3a6 100644
--- a/drivers/media/video/gspca/stv06xx/Makefile
+++ b/drivers/media/video/gspca/stv06xx/Makefile
@@ -3,7 +3,8 @@
gspca_stv06xx-objs := stv06xx.o \
stv06xx_vv6410.o \
stv06xx_hdcs.o \
- stv06xx_pb0100.o
+ stv06xx_pb0100.o \
+ stv06xx_st6422.o
EXTRA_CFLAGS += -Idrivers/media/video/gspca
diff --git a/drivers/media/video/gspca/stv06xx/stv06xx.c b/drivers/media/video/gspca/stv06xx/stv06xx.c
index e573c34..0da8e0d 100644
--- a/drivers/media/video/gspca/stv06xx/stv06xx.c
+++ b/drivers/media/video/gspca/stv06xx/stv06xx.c
@@ -92,11 +92,10 @@
{
int err = 0;
- if (IS_850(sd)) {
+ if (sd->bridge == BRIDGE_STV610) {
struct usb_device *udev = sd->gspca_dev.dev;
__u8 *buf = sd->gspca_dev.usb_buf;
- /* Quickam Web needs an extra packet */
buf[0] = 0;
err = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0x04, 0x40, 0x1704, 0, buf, 1,
@@ -253,7 +252,7 @@
err = sd->sensor->init(sd);
- if (dump_sensor)
+ if (dump_sensor && sd->sensor->dump)
sd->sensor->dump(sd);
return (err < 0) ? err : 0;
@@ -318,6 +317,8 @@
__u8 *data, /* isoc packet */
int len) /* iso packet length */
{
+ struct sd *sd = (struct sd *) gspca_dev;
+
PDEBUG(D_PACK, "Packet of length %d arrived", len);
/* A packet may contain several frames
@@ -343,14 +344,29 @@
if (len < chunk_len) {
PDEBUG(D_ERR, "URB packet length is smaller"
" than the specified chunk length");
+ gspca_dev->last_packet_type = DISCARD_PACKET;
return;
}
+ /* First byte seem to be 02=data 2nd byte is unknown??? */
+ if (sd->bridge == BRIDGE_ST6422 && (id & 0xFF00) == 0x0200)
+ goto frame_data;
+
switch (id) {
case 0x0200:
case 0x4200:
+frame_data:
PDEBUG(D_PACK, "Frame data packet detected");
+ if (sd->to_skip) {
+ int skip = (sd->to_skip < chunk_len) ?
+ sd->to_skip : chunk_len;
+ data += skip;
+ len -= skip;
+ chunk_len -= skip;
+ sd->to_skip -= skip;
+ }
+
gspca_frame_add(gspca_dev, INTER_PACKET, frame,
data, chunk_len);
break;
@@ -365,6 +381,9 @@
gspca_frame_add(gspca_dev, FIRST_PACKET,
frame, data, 0);
+ if (sd->bridge == BRIDGE_ST6422)
+ sd->to_skip = gspca_dev->width * 4;
+
if (chunk_len)
PDEBUG(D_ERR, "Chunk length is "
"non-zero on a SOF");
@@ -395,8 +414,12 @@
/* Unknown chunk with 2 bytes of data,
occurs 2-3 times per USB interrupt */
break;
+ case 0x42ff:
+ PDEBUG(D_PACK, "Chunk 0x42ff detected");
+ /* Special chunk seen sometimes on the ST6422 */
+ break;
default:
- PDEBUG(D_PACK, "Unknown chunk %d detected", id);
+ PDEBUG(D_PACK, "Unknown chunk 0x%04x detected", id);
/* Unknown chunk */
}
data += chunk_len;
@@ -428,11 +451,16 @@
cam = &gspca_dev->cam;
sd->desc = sd_desc;
+ sd->bridge = id->driver_info;
gspca_dev->sd_desc = &sd->desc;
if (dump_bridge)
stv06xx_dump_bridge(sd);
+ sd->sensor = &stv06xx_sensor_st6422;
+ if (!sd->sensor->probe(sd))
+ return 0;
+
sd->sensor = &stv06xx_sensor_vv6410;
if (!sd->sensor->probe(sd))
return 0;
@@ -457,9 +485,20 @@
/* -- module initialisation -- */
static const __devinitdata struct usb_device_id device_table[] = {
- {USB_DEVICE(0x046d, 0x0840)}, /* QuickCam Express */
- {USB_DEVICE(0x046d, 0x0850)}, /* LEGO cam / QuickCam Web */
- {USB_DEVICE(0x046d, 0x0870)}, /* Dexxa WebCam USB */
+ /* QuickCam Express */
+ {USB_DEVICE(0x046d, 0x0840), .driver_info = BRIDGE_STV600 },
+ /* LEGO cam / QuickCam Web */
+ {USB_DEVICE(0x046d, 0x0850), .driver_info = BRIDGE_STV610 },
+ /* Dexxa WebCam USB */
+ {USB_DEVICE(0x046d, 0x0870), .driver_info = BRIDGE_STV602 },
+ /* QuickCam Messenger */
+ {USB_DEVICE(0x046D, 0x08F0), .driver_info = BRIDGE_ST6422 },
+ /* QuickCam Communicate */
+ {USB_DEVICE(0x046D, 0x08F5), .driver_info = BRIDGE_ST6422 },
+ /* QuickCam Messenger (new) */
+ {USB_DEVICE(0x046D, 0x08F6), .driver_info = BRIDGE_ST6422 },
+ /* QuickCam Messenger (new) */
+ {USB_DEVICE(0x046D, 0x08DA), .driver_info = BRIDGE_ST6422 },
{}
};
MODULE_DEVICE_TABLE(usb, device_table);
diff --git a/drivers/media/video/gspca/stv06xx/stv06xx.h b/drivers/media/video/gspca/stv06xx/stv06xx.h
index 1207e7d..9df7137 100644
--- a/drivers/media/video/gspca/stv06xx/stv06xx.h
+++ b/drivers/media/video/gspca/stv06xx/stv06xx.h
@@ -93,6 +93,17 @@
/* Sensor private data */
void *sensor_priv;
+
+ /* The first 4 lines produced by the stv6422 are no good, this keeps
+ track of how many bytes we still need to skip during a frame */
+ int to_skip;
+
+ /* Bridge / Camera type */
+ u8 bridge;
+ #define BRIDGE_STV600 0
+ #define BRIDGE_STV602 1
+ #define BRIDGE_STV610 2
+ #define BRIDGE_ST6422 3 /* With integrated sensor */
};
int stv06xx_write_bridge(struct sd *sd, u16 address, u16 i2c_data);
diff --git a/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c b/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c
index b169038..3039ec2 100644
--- a/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c
+++ b/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c
@@ -434,7 +434,7 @@
hdcs->exp.er = 100;
/*
- * Frame rate on HDCS-1000 0x46D:0x840 depends on PSMP:
+ * Frame rate on HDCS-1000 with STV600 depends on PSMP:
* 4 = doesn't work at all
* 5 = 7.8 fps,
* 6 = 6.9 fps,
@@ -443,7 +443,7 @@
* 15 = 4.4 fps,
* 31 = 2.8 fps
*
- * Frame rate on HDCS-1000 0x46D:0x870 depends on PSMP:
+ * Frame rate on HDCS-1000 with STV602 depends on PSMP:
* 15 = doesn't work at all
* 18 = doesn't work at all
* 19 = 7.3 fps
@@ -453,7 +453,7 @@
* 24 = 6.3 fps
* 30 = 5.4 fps
*/
- hdcs->psmp = IS_870(sd) ? 20 : 5;
+ hdcs->psmp = (sd->bridge == BRIDGE_STV602) ? 20 : 5;
sd->sensor_priv = hdcs;
@@ -530,7 +530,7 @@
int i, err = 0;
/* Set the STV0602AA in STV0600 emulation mode */
- if (IS_870(sd))
+ if (sd->bridge == BRIDGE_STV602)
stv06xx_write_bridge(sd, STV_STV0600_EMULATION, 1);
/* Execute the bridge init */
@@ -558,7 +558,7 @@
return err;
/* Set PGA sample duration
- (was 0x7E for IS_870, but caused slow framerate with HDCS-1020) */
+ (was 0x7E for the STV602, but caused slow framerate with HDCS-1020) */
if (IS_1020(sd))
err = stv06xx_write_sensor(sd, HDCS_TCTRL,
(HDCS_ADC_START_SIG_DUR << 6) | hdcs->psmp);
diff --git a/drivers/media/video/gspca/stv06xx/stv06xx_sensor.h b/drivers/media/video/gspca/stv06xx/stv06xx_sensor.h
index e88c42f..934b9ce 100644
--- a/drivers/media/video/gspca/stv06xx/stv06xx_sensor.h
+++ b/drivers/media/video/gspca/stv06xx/stv06xx_sensor.h
@@ -32,14 +32,13 @@
#include "stv06xx.h"
-#define IS_850(sd) ((sd)->gspca_dev.dev->descriptor.idProduct == 0x850)
-#define IS_870(sd) ((sd)->gspca_dev.dev->descriptor.idProduct == 0x870)
#define IS_1020(sd) ((sd)->sensor == &stv06xx_sensor_hdcs1020)
extern const struct stv06xx_sensor stv06xx_sensor_vv6410;
extern const struct stv06xx_sensor stv06xx_sensor_hdcs1x00;
extern const struct stv06xx_sensor stv06xx_sensor_hdcs1020;
extern const struct stv06xx_sensor stv06xx_sensor_pb0100;
+extern const struct stv06xx_sensor stv06xx_sensor_st6422;
struct stv06xx_sensor {
/* Defines the name of a sensor */
diff --git a/drivers/media/video/gspca/stv06xx/stv06xx_st6422.c b/drivers/media/video/gspca/stv06xx/stv06xx_st6422.c
new file mode 100644
index 0000000..87cb5b9
--- /dev/null
+++ b/drivers/media/video/gspca/stv06xx/stv06xx_st6422.c
@@ -0,0 +1,453 @@
+/*
+ * Support for the sensor part which is integrated (I think) into the
+ * st6422 stv06xx alike bridge, as its integrated there are no i2c writes
+ * but instead direct bridge writes.
+ *
+ * Copyright (c) 2009 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Strongly based on qc-usb-messenger, which is:
+ * Copyright (c) 2001 Jean-Fredric Clere, Nikolas Zimmermann, Georg Acher
+ * Mark Cave-Ayland, Carlo E Prelz, Dick Streefland
+ * Copyright (c) 2002, 2003 Tuukka Toivonen
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include "stv06xx_st6422.h"
+
+static struct v4l2_pix_format st6422_mode[] = {
+ /* Note we actually get 124 lines of data, of which we skip the 4st
+ 4 as they are garbage */
+ {
+ 162,
+ 120,
+ V4L2_PIX_FMT_SGRBG8,
+ V4L2_FIELD_NONE,
+ .sizeimage = 162 * 120,
+ .bytesperline = 162,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .priv = 1
+ },
+ /* Note we actually get 248 lines of data, of which we skip the 4st
+ 4 as they are garbage, and we tell the app it only gets the
+ first 240 of the 244 lines it actually gets, so that it ignores
+ the last 4. */
+ {
+ 324,
+ 240,
+ V4L2_PIX_FMT_SGRBG8,
+ V4L2_FIELD_NONE,
+ .sizeimage = 324 * 244,
+ .bytesperline = 324,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .priv = 0
+ },
+};
+
+static const struct ctrl st6422_ctrl[] = {
+#define BRIGHTNESS_IDX 0
+ {
+ {
+ .id = V4L2_CID_BRIGHTNESS,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Brightness",
+ .minimum = 0,
+ .maximum = 31,
+ .step = 1,
+ .default_value = 3
+ },
+ .set = st6422_set_brightness,
+ .get = st6422_get_brightness
+ },
+#define CONTRAST_IDX 1
+ {
+ {
+ .id = V4L2_CID_CONTRAST,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Contrast",
+ .minimum = 0,
+ .maximum = 15,
+ .step = 1,
+ .default_value = 11
+ },
+ .set = st6422_set_contrast,
+ .get = st6422_get_contrast
+ },
+#define GAIN_IDX 2
+ {
+ {
+ .id = V4L2_CID_GAIN,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Gain",
+ .minimum = 0,
+ .maximum = 255,
+ .step = 1,
+ .default_value = 64
+ },
+ .set = st6422_set_gain,
+ .get = st6422_get_gain
+ },
+#define EXPOSURE_IDX 3
+ {
+ {
+ .id = V4L2_CID_EXPOSURE,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Exposure",
+ .minimum = 0,
+ .maximum = 1023,
+ .step = 1,
+ .default_value = 256
+ },
+ .set = st6422_set_exposure,
+ .get = st6422_get_exposure
+ },
+};
+
+static int st6422_probe(struct sd *sd)
+{
+ int i;
+ s32 *sensor_settings;
+
+ if (sd->bridge != BRIDGE_ST6422)
+ return -ENODEV;
+
+ info("st6422 sensor detected");
+
+ sensor_settings = kmalloc(ARRAY_SIZE(st6422_ctrl) * sizeof(s32),
+ GFP_KERNEL);
+ if (!sensor_settings)
+ return -ENOMEM;
+
+ sd->gspca_dev.cam.cam_mode = st6422_mode;
+ sd->gspca_dev.cam.nmodes = ARRAY_SIZE(st6422_mode);
+ sd->desc.ctrls = st6422_ctrl;
+ sd->desc.nctrls = ARRAY_SIZE(st6422_ctrl);
+ sd->sensor_priv = sensor_settings;
+
+ for (i = 0; i < sd->desc.nctrls; i++)
+ sensor_settings[i] = st6422_ctrl[i].qctrl.default_value;
+
+ return 0;
+}
+
+static int st6422_init(struct sd *sd)
+{
+ int err = 0, i;
+
+ const u16 st6422_bridge_init[][2] = {
+ { STV_ISO_ENABLE, 0x00 }, /* disable capture */
+ { 0x1436, 0x00 },
+ { 0x1432, 0x03 }, /* 0x00-0x1F brightness */
+ { 0x143a, 0xF9 }, /* 0x00-0x0F contrast */
+ { 0x0509, 0x38 }, /* R */
+ { 0x050a, 0x38 }, /* G */
+ { 0x050b, 0x38 }, /* B */
+ { 0x050c, 0x2A },
+ { 0x050d, 0x01 },
+
+
+ { 0x1431, 0x00 }, /* 0x00-0x07 ??? */
+ { 0x1433, 0x34 }, /* 160x120, 0x00-0x01 night filter */
+ { 0x1438, 0x18 }, /* 640x480 */
+/* 18 bayes */
+/* 10 compressed? */
+
+ { 0x1439, 0x00 },
+/* antiflimmer?? 0xa2 ger perfekt bild mot monitor */
+
+ { 0x143b, 0x05 },
+ { 0x143c, 0x00 }, /* 0x00-0x01 - ??? */
+
+
+/* shutter time 0x0000-0x03FF */
+/* low value give good picures on moving objects (but requires much light) */
+/* high value gives good picures in darkness (but tends to be overexposed) */
+ { 0x143e, 0x01 },
+ { 0x143d, 0x00 },
+
+ { 0x1442, 0xe2 },
+/* write: 1x1x xxxx */
+/* read: 1x1x xxxx */
+/* bit 5 == button pressed and hold if 0 */
+/* write 0xe2,0xea */
+
+/* 0x144a */
+/* 0x00 init */
+/* bit 7 == button has been pressed, but not handled */
+
+/* interrupt */
+/* if(urb->iso_frame_desc[i].status == 0x80) { */
+/* if(urb->iso_frame_desc[i].status == 0x88) { */
+
+ { 0x1500, 0xd0 },
+ { 0x1500, 0xd0 },
+ { 0x1500, 0x50 }, /* 0x00 - 0xFF 0x80 == compr ? */
+
+ { 0x1501, 0xaf },
+/* high val-> ljus area blir morkare. */
+/* low val -> ljus area blir ljusare. */
+ { 0x1502, 0xc2 },
+/* high val-> ljus area blir morkare. */
+/* low val -> ljus area blir ljusare. */
+ { 0x1503, 0x45 },
+/* high val-> ljus area blir morkare. */
+/* low val -> ljus area blir ljusare. */
+
+ { 0x1505, 0x02 },
+/* 2 : 324x248 80352 bytes */
+/* 7 : 248x162 40176 bytes */
+/* c+f: 162*124 20088 bytes */
+
+ { 0x150e, 0x8e },
+ { 0x150f, 0x37 },
+ { 0x15c0, 0x00 },
+ { 0x15c1, 1023 }, /* 160x120, ISOC_PACKET_SIZE */
+ { 0x15c3, 0x08 }, /* 0x04/0x14 ... test pictures ??? */
+
+
+ { 0x143f, 0x01 }, /* commit settings */
+
+ };
+
+ for (i = 0; i < ARRAY_SIZE(st6422_bridge_init) && !err; i++) {
+ err = stv06xx_write_bridge(sd, st6422_bridge_init[i][0],
+ st6422_bridge_init[i][1]);
+ }
+
+ return err;
+}
+
+static void st6422_disconnect(struct sd *sd)
+{
+ sd->sensor = NULL;
+ kfree(sd->sensor_priv);
+}
+
+static int st6422_start(struct sd *sd)
+{
+ int err, packet_size;
+ struct cam *cam = &sd->gspca_dev.cam;
+ s32 *sensor_settings = sd->sensor_priv;
+ struct usb_host_interface *alt;
+ struct usb_interface *intf;
+
+ intf = usb_ifnum_to_if(sd->gspca_dev.dev, sd->gspca_dev.iface);
+ alt = usb_altnum_to_altsetting(intf, sd->gspca_dev.alt);
+ if (!alt) {
+ PDEBUG(D_ERR, "Couldn't get altsetting");
+ return -EIO;
+ }
+
+ packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize);
+ err = stv06xx_write_bridge(sd, 0x15c1, packet_size);
+ if (err < 0)
+ return err;
+
+ if (cam->cam_mode[sd->gspca_dev.curr_mode].priv)
+ err = stv06xx_write_bridge(sd, 0x1505, 0x0f);
+ else
+ err = stv06xx_write_bridge(sd, 0x1505, 0x02);
+ if (err < 0)
+ return err;
+
+ err = st6422_set_brightness(&sd->gspca_dev,
+ sensor_settings[BRIGHTNESS_IDX]);
+ if (err < 0)
+ return err;
+
+ err = st6422_set_contrast(&sd->gspca_dev,
+ sensor_settings[CONTRAST_IDX]);
+ if (err < 0)
+ return err;
+
+ err = st6422_set_exposure(&sd->gspca_dev,
+ sensor_settings[EXPOSURE_IDX]);
+ if (err < 0)
+ return err;
+
+ err = st6422_set_gain(&sd->gspca_dev,
+ sensor_settings[GAIN_IDX]);
+ if (err < 0)
+ return err;
+
+ PDEBUG(D_STREAM, "Starting stream");
+
+ return 0;
+}
+
+static int st6422_stop(struct sd *sd)
+{
+ PDEBUG(D_STREAM, "Halting stream");
+
+ return 0;
+}
+
+static int st6422_get_brightness(struct gspca_dev *gspca_dev, __s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ s32 *sensor_settings = sd->sensor_priv;
+
+ *val = sensor_settings[BRIGHTNESS_IDX];
+
+ PDEBUG(D_V4L2, "Read brightness %d", *val);
+
+ return 0;
+}
+
+static int st6422_set_brightness(struct gspca_dev *gspca_dev, __s32 val)
+{
+ int err;
+ struct sd *sd = (struct sd *) gspca_dev;
+ s32 *sensor_settings = sd->sensor_priv;
+
+ sensor_settings[BRIGHTNESS_IDX] = val;
+
+ if (!gspca_dev->streaming)
+ return 0;
+
+ /* val goes from 0 -> 31 */
+ PDEBUG(D_V4L2, "Set brightness to %d", val);
+ err = stv06xx_write_bridge(sd, 0x1432, val);
+ if (err < 0)
+ return err;
+
+ /* commit settings */
+ err = stv06xx_write_bridge(sd, 0x143f, 0x01);
+ return (err < 0) ? err : 0;
+}
+
+static int st6422_get_contrast(struct gspca_dev *gspca_dev, __s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ s32 *sensor_settings = sd->sensor_priv;
+
+ *val = sensor_settings[CONTRAST_IDX];
+
+ PDEBUG(D_V4L2, "Read contrast %d", *val);
+
+ return 0;
+}
+
+static int st6422_set_contrast(struct gspca_dev *gspca_dev, __s32 val)
+{
+ int err;
+ struct sd *sd = (struct sd *) gspca_dev;
+ s32 *sensor_settings = sd->sensor_priv;
+
+ sensor_settings[CONTRAST_IDX] = val;
+
+ if (!gspca_dev->streaming)
+ return 0;
+
+ /* Val goes from 0 -> 15 */
+ PDEBUG(D_V4L2, "Set contrast to %d\n", val);
+ err = stv06xx_write_bridge(sd, 0x143a, 0xf0 | val);
+ if (err < 0)
+ return err;
+
+ /* commit settings */
+ err = stv06xx_write_bridge(sd, 0x143f, 0x01);
+ return (err < 0) ? err : 0;
+}
+
+static int st6422_get_gain(struct gspca_dev *gspca_dev, __s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ s32 *sensor_settings = sd->sensor_priv;
+
+ *val = sensor_settings[GAIN_IDX];
+
+ PDEBUG(D_V4L2, "Read gain %d", *val);
+
+ return 0;
+}
+
+static int st6422_set_gain(struct gspca_dev *gspca_dev, __s32 val)
+{
+ int err;
+ struct sd *sd = (struct sd *) gspca_dev;
+ s32 *sensor_settings = sd->sensor_priv;
+
+ sensor_settings[GAIN_IDX] = val;
+
+ if (!gspca_dev->streaming)
+ return 0;
+
+ PDEBUG(D_V4L2, "Set gain to %d", val);
+
+ /* Set red, green, blue, gain */
+ err = stv06xx_write_bridge(sd, 0x0509, val);
+ if (err < 0)
+ return err;
+
+ err = stv06xx_write_bridge(sd, 0x050a, val);
+ if (err < 0)
+ return err;
+
+ err = stv06xx_write_bridge(sd, 0x050b, val);
+ if (err < 0)
+ return err;
+
+ /* 2 mystery writes */
+ err = stv06xx_write_bridge(sd, 0x050c, 0x2a);
+ if (err < 0)
+ return err;
+
+ err = stv06xx_write_bridge(sd, 0x050d, 0x01);
+ if (err < 0)
+ return err;
+
+ /* commit settings */
+ err = stv06xx_write_bridge(sd, 0x143f, 0x01);
+ return (err < 0) ? err : 0;
+}
+
+static int st6422_get_exposure(struct gspca_dev *gspca_dev, __s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ s32 *sensor_settings = sd->sensor_priv;
+
+ *val = sensor_settings[EXPOSURE_IDX];
+
+ PDEBUG(D_V4L2, "Read exposure %d", *val);
+
+ return 0;
+}
+
+static int st6422_set_exposure(struct gspca_dev *gspca_dev, __s32 val)
+{
+ int err;
+ struct sd *sd = (struct sd *) gspca_dev;
+ s32 *sensor_settings = sd->sensor_priv;
+
+ sensor_settings[EXPOSURE_IDX] = val;
+
+ if (!gspca_dev->streaming)
+ return 0;
+
+ PDEBUG(D_V4L2, "Set exposure to %d\n", val);
+ err = stv06xx_write_bridge(sd, 0x143d, val & 0xff);
+ if (err < 0)
+ return err;
+
+ err = stv06xx_write_bridge(sd, 0x143e, val >> 8);
+ if (err < 0)
+ return err;
+
+ /* commit settings */
+ err = stv06xx_write_bridge(sd, 0x143f, 0x01);
+ return (err < 0) ? err : 0;
+}
diff --git a/drivers/media/video/gspca/stv06xx/stv06xx_st6422.h b/drivers/media/video/gspca/stv06xx/stv06xx_st6422.h
new file mode 100644
index 0000000..b2d45fe
--- /dev/null
+++ b/drivers/media/video/gspca/stv06xx/stv06xx_st6422.h
@@ -0,0 +1,59 @@
+/*
+ * Support for the sensor part which is integrated (I think) into the
+ * st6422 stv06xx alike bridge, as its integrated there are no i2c writes
+ * but instead direct bridge writes.
+ *
+ * Copyright (c) 2009 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Strongly based on qc-usb-messenger, which is:
+ * Copyright (c) 2001 Jean-Fredric Clere, Nikolas Zimmermann, Georg Acher
+ * Mark Cave-Ayland, Carlo E Prelz, Dick Streefland
+ * Copyright (c) 2002, 2003 Tuukka Toivonen
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef STV06XX_ST6422_H_
+#define STV06XX_ST6422_H_
+
+#include "stv06xx_sensor.h"
+
+static int st6422_probe(struct sd *sd);
+static int st6422_start(struct sd *sd);
+static int st6422_init(struct sd *sd);
+static int st6422_stop(struct sd *sd);
+static void st6422_disconnect(struct sd *sd);
+
+/* V4L2 controls supported by the driver */
+static int st6422_get_brightness(struct gspca_dev *gspca_dev, __s32 *val);
+static int st6422_set_brightness(struct gspca_dev *gspca_dev, __s32 val);
+static int st6422_get_contrast(struct gspca_dev *gspca_dev, __s32 *val);
+static int st6422_set_contrast(struct gspca_dev *gspca_dev, __s32 val);
+static int st6422_get_gain(struct gspca_dev *gspca_dev, __s32 *val);
+static int st6422_set_gain(struct gspca_dev *gspca_dev, __s32 val);
+static int st6422_get_exposure(struct gspca_dev *gspca_dev, __s32 *val);
+static int st6422_set_exposure(struct gspca_dev *gspca_dev, __s32 val);
+
+const struct stv06xx_sensor stv06xx_sensor_st6422 = {
+ .name = "ST6422",
+ .init = st6422_init,
+ .probe = st6422_probe,
+ .start = st6422_start,
+ .stop = st6422_stop,
+ .disconnect = st6422_disconnect,
+};
+
+#endif
diff --git a/drivers/media/video/ivtv/ivtv-controls.c b/drivers/media/video/ivtv/ivtv-controls.c
index 84995bc..a3b77ed 100644
--- a/drivers/media/video/ivtv/ivtv-controls.c
+++ b/drivers/media/video/ivtv/ivtv-controls.c
@@ -60,6 +60,8 @@
switch (qctrl->id) {
/* Standard V4L2 controls */
+ case V4L2_CID_USER_CLASS:
+ return v4l2_ctrl_query_fill(qctrl, 0, 0, 0, 0);
case V4L2_CID_BRIGHTNESS:
case V4L2_CID_HUE:
case V4L2_CID_SATURATION:
diff --git a/drivers/media/video/mt9m001.c b/drivers/media/video/mt9m001.c
index 459c04c..4d794b4 100644
--- a/drivers/media/video/mt9m001.c
+++ b/drivers/media/video/mt9m001.c
@@ -280,15 +280,9 @@
{
struct v4l2_pix_format *pix = &f->fmt.pix;
- if (pix->height < 32 + icd->y_skip_top)
- pix->height = 32 + icd->y_skip_top;
- if (pix->height > 1024 + icd->y_skip_top)
- pix->height = 1024 + icd->y_skip_top;
- if (pix->width < 48)
- pix->width = 48;
- if (pix->width > 1280)
- pix->width = 1280;
- pix->width &= ~0x01; /* has to be even, unsure why was ~3 */
+ v4l_bound_align_image(&pix->width, 48, 1280, 1,
+ &pix->height, 32 + icd->y_skip_top,
+ 1024 + icd->y_skip_top, 0, 0);
return 0;
}
diff --git a/drivers/media/video/mt9t031.c b/drivers/media/video/mt9t031.c
index f72aeb7c..4207fb34 100644
--- a/drivers/media/video/mt9t031.c
+++ b/drivers/media/video/mt9t031.c
@@ -385,17 +385,9 @@
{
struct v4l2_pix_format *pix = &f->fmt.pix;
- if (pix->height < MT9T031_MIN_HEIGHT)
- pix->height = MT9T031_MIN_HEIGHT;
- if (pix->height > MT9T031_MAX_HEIGHT)
- pix->height = MT9T031_MAX_HEIGHT;
- if (pix->width < MT9T031_MIN_WIDTH)
- pix->width = MT9T031_MIN_WIDTH;
- if (pix->width > MT9T031_MAX_WIDTH)
- pix->width = MT9T031_MAX_WIDTH;
-
- pix->width &= ~0x01; /* has to be even */
- pix->height &= ~0x01; /* has to be even */
+ v4l_bound_align_image(
+ &pix->width, MT9T031_MIN_WIDTH, MT9T031_MAX_WIDTH, 1,
+ &pix->height, MT9T031_MIN_HEIGHT, MT9T031_MAX_HEIGHT, 1, 0);
return 0;
}
diff --git a/drivers/media/video/mt9v022.c b/drivers/media/video/mt9v022.c
index be20d31..dbdcc86 100644
--- a/drivers/media/video/mt9v022.c
+++ b/drivers/media/video/mt9v022.c
@@ -364,15 +364,9 @@
{
struct v4l2_pix_format *pix = &f->fmt.pix;
- if (pix->height < 32 + icd->y_skip_top)
- pix->height = 32 + icd->y_skip_top;
- if (pix->height > 480 + icd->y_skip_top)
- pix->height = 480 + icd->y_skip_top;
- if (pix->width < 48)
- pix->width = 48;
- if (pix->width > 752)
- pix->width = 752;
- pix->width &= ~0x03; /* ? */
+ v4l_bound_align_image(&pix->width, 48, 752, 2 /* ? */,
+ &pix->height, 32 + icd->y_skip_top,
+ 480 + icd->y_skip_top, 0, 0);
return 0;
}
diff --git a/drivers/media/video/ov511.c b/drivers/media/video/ov511.c
index 08cfd3e..0bc2cf5 100644
--- a/drivers/media/video/ov511.c
+++ b/drivers/media/video/ov511.c
@@ -211,8 +211,6 @@
static struct usb_device_id device_table [] = {
{ USB_DEVICE(VEND_OMNIVISION, PROD_OV511) },
{ USB_DEVICE(VEND_OMNIVISION, PROD_OV511PLUS) },
- { USB_DEVICE(VEND_OMNIVISION, PROD_OV518) },
- { USB_DEVICE(VEND_OMNIVISION, PROD_OV518PLUS) },
{ USB_DEVICE(VEND_MATTEL, PROD_ME2CAM) },
{ } /* Terminating entry */
};
diff --git a/drivers/media/video/pvrusb2/pvrusb2-audio.c b/drivers/media/video/pvrusb2/pvrusb2-audio.c
index 10ef1a2..416933c 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-audio.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-audio.c
@@ -48,11 +48,13 @@
MSP_DSP_IN_SCART),
};
-static const struct routing_scheme routing_schemes[] = {
- [PVR2_ROUTING_SCHEME_HAUPPAUGE] = {
- .def = routing_scheme0,
- .cnt = ARRAY_SIZE(routing_scheme0),
- },
+static const struct routing_scheme routing_def0 = {
+ .def = routing_scheme0,
+ .cnt = ARRAY_SIZE(routing_scheme0),
+};
+
+static const struct routing_scheme *routing_schemes[] = {
+ [PVR2_ROUTING_SCHEME_HAUPPAUGE] = &routing_def0,
};
void pvr2_msp3400_subdev_update(struct pvr2_hdw *hdw, struct v4l2_subdev *sd)
@@ -65,7 +67,7 @@
pvr2_trace(PVR2_TRACE_CHIPS, "subdev msp3400 v4l2 set_stereo");
if ((sid < ARRAY_SIZE(routing_schemes)) &&
- ((sp = routing_schemes + sid) != NULL) &&
+ ((sp = routing_schemes[sid]) != NULL) &&
(hdw->input_val >= 0) &&
(hdw->input_val < sp->cnt)) {
input = sp->def[hdw->input_val];
diff --git a/drivers/media/video/pvrusb2/pvrusb2-cs53l32a.c b/drivers/media/video/pvrusb2/pvrusb2-cs53l32a.c
index 9023adf..68980e1 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-cs53l32a.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-cs53l32a.c
@@ -49,11 +49,13 @@
[PVR2_CVAL_INPUT_SVIDEO] = 0,
};
-static const struct routing_scheme routing_schemes[] = {
- [PVR2_ROUTING_SCHEME_ONAIR] = {
- .def = routing_scheme1,
- .cnt = ARRAY_SIZE(routing_scheme1),
- },
+static const struct routing_scheme routing_def1 = {
+ .def = routing_scheme1,
+ .cnt = ARRAY_SIZE(routing_scheme1),
+};
+
+static const struct routing_scheme *routing_schemes[] = {
+ [PVR2_ROUTING_SCHEME_ONAIR] = &routing_def1,
};
@@ -65,12 +67,11 @@
u32 input;
pvr2_trace(PVR2_TRACE_CHIPS, "subdev v4l2 set_input(%d)",
hdw->input_val);
- if ((sid < ARRAY_SIZE(routing_schemes)) &&
- ((sp = routing_schemes + sid) != NULL) &&
- (hdw->input_val >= 0) &&
- (hdw->input_val < sp->cnt)) {
- input = sp->def[hdw->input_val];
- } else {
+ sp = (sid < ARRAY_SIZE(routing_schemes)) ?
+ routing_schemes[sid] : NULL;
+ if ((sp == NULL) ||
+ (hdw->input_val < 0) ||
+ (hdw->input_val >= sp->cnt)) {
pvr2_trace(PVR2_TRACE_ERROR_LEGS,
"*** WARNING *** subdev v4l2 set_input:"
" Invalid routing scheme (%u)"
@@ -78,6 +79,7 @@
sid, hdw->input_val);
return;
}
+ input = sp->def[hdw->input_val];
sd->ops->audio->s_routing(sd, input, 0, 0);
}
}
diff --git a/drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c b/drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c
index 05e5235..82c1358 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c
@@ -68,6 +68,11 @@
},
};
+static const struct routing_scheme routing_def0 = {
+ .def = routing_scheme0,
+ .cnt = ARRAY_SIZE(routing_scheme0),
+};
+
/* Specific to gotview device */
static const struct routing_scheme_item routing_schemegv[] = {
[PVR2_CVAL_INPUT_TV] = {
@@ -90,15 +95,14 @@
},
};
-static const struct routing_scheme routing_schemes[] = {
- [PVR2_ROUTING_SCHEME_HAUPPAUGE] = {
- .def = routing_scheme0,
- .cnt = ARRAY_SIZE(routing_scheme0),
- },
- [PVR2_ROUTING_SCHEME_GOTVIEW] = {
- .def = routing_schemegv,
- .cnt = ARRAY_SIZE(routing_schemegv),
- },
+static const struct routing_scheme routing_defgv = {
+ .def = routing_schemegv,
+ .cnt = ARRAY_SIZE(routing_schemegv),
+};
+
+static const struct routing_scheme *routing_schemes[] = {
+ [PVR2_ROUTING_SCHEME_HAUPPAUGE] = &routing_def0,
+ [PVR2_ROUTING_SCHEME_GOTVIEW] = &routing_defgv,
};
void pvr2_cx25840_subdev_update(struct pvr2_hdw *hdw, struct v4l2_subdev *sd)
@@ -110,13 +114,11 @@
const struct routing_scheme *sp;
unsigned int sid = hdw->hdw_desc->signal_routing_scheme;
- if ((sid < ARRAY_SIZE(routing_schemes)) &&
- ((sp = routing_schemes + sid) != NULL) &&
- (hdw->input_val >= 0) &&
- (hdw->input_val < sp->cnt)) {
- vid_input = sp->def[hdw->input_val].vid;
- aud_input = sp->def[hdw->input_val].aud;
- } else {
+ sp = (sid < ARRAY_SIZE(routing_schemes)) ?
+ routing_schemes[sid] : NULL;
+ if ((sp == NULL) ||
+ (hdw->input_val < 0) ||
+ (hdw->input_val >= sp->cnt)) {
pvr2_trace(PVR2_TRACE_ERROR_LEGS,
"*** WARNING *** subdev cx2584x set_input:"
" Invalid routing scheme (%u)"
@@ -124,7 +126,8 @@
sid, hdw->input_val);
return;
}
-
+ vid_input = sp->def[hdw->input_val].vid;
+ aud_input = sp->def[hdw->input_val].aud;
pvr2_trace(PVR2_TRACE_CHIPS,
"subdev cx2584x set_input vid=0x%x aud=0x%x",
vid_input, aud_input);
diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.c b/drivers/media/video/pvrusb2/pvrusb2-hdw.c
index 0c745b1..cbc3887 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-hdw.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.c
@@ -85,8 +85,8 @@
module_param_array(tolerance, int, NULL, 0444);
MODULE_PARM_DESC(tolerance,"specify stream error tolerance");
-/* US Broadcast channel 7 (175.25 MHz) */
-static int default_tv_freq = 175250000L;
+/* US Broadcast channel 3 (61.25 MHz), to help with testing */
+static int default_tv_freq = 61250000L;
/* 104.3 MHz, a usable FM station for my area */
static int default_radio_freq = 104300000L;
@@ -1987,6 +1987,34 @@
}
+static void pvr2_hdw_cx25840_vbi_hack(struct pvr2_hdw *hdw)
+{
+ /*
+ Mike Isely <isely@pobox.com> 19-Nov-2006 - This bit of nuttiness
+ for cx25840 causes that module to correctly set up its video
+ scaling. This is really a problem in the cx25840 module itself,
+ but we work around it here. The problem has not been seen in
+ ivtv because there VBI is supported and set up. We don't do VBI
+ here (at least not yet) and thus we never attempted to even set
+ it up.
+ */
+ struct v4l2_format fmt;
+ if (hdw->decoder_client_id != PVR2_CLIENT_ID_CX25840) {
+ /* We're not using a cx25840 so don't enable the hack */
+ return;
+ }
+
+ pvr2_trace(PVR2_TRACE_INIT,
+ "Module ID %u:"
+ " Executing cx25840 VBI hack",
+ hdw->decoder_client_id);
+ memset(&fmt, 0, sizeof(fmt));
+ fmt.type = V4L2_BUF_TYPE_SLICED_VBI_CAPTURE;
+ v4l2_device_call_all(&hdw->v4l2_dev, hdw->decoder_client_id,
+ video, s_fmt, &fmt);
+}
+
+
static int pvr2_hdw_load_subdev(struct pvr2_hdw *hdw,
const struct pvr2_device_client_desc *cd)
{
@@ -2078,30 +2106,6 @@
/* client-specific setup... */
switch (mid) {
case PVR2_CLIENT_ID_CX25840:
- hdw->decoder_client_id = mid;
- {
- /*
- Mike Isely <isely@pobox.com> 19-Nov-2006 - This
- bit of nuttiness for cx25840 causes that module
- to correctly set up its video scaling. This is
- really a problem in the cx25840 module itself,
- but we work around it here. The problem has not
- been seen in ivtv because there VBI is supported
- and set up. We don't do VBI here (at least not
- yet) and thus we never attempted to even set it
- up.
- */
- struct v4l2_format fmt;
- pvr2_trace(PVR2_TRACE_INIT,
- "Module ID %u:"
- " Executing cx25840 VBI hack",
- mid);
- memset(&fmt, 0, sizeof(fmt));
- fmt.type = V4L2_BUF_TYPE_SLICED_VBI_CAPTURE;
- v4l2_device_call_all(&hdw->v4l2_dev, mid,
- video, s_fmt, &fmt);
- }
- break;
case PVR2_CLIENT_ID_SAA7115:
hdw->decoder_client_id = mid;
break;
@@ -2202,6 +2206,8 @@
cptr->info->set_value(cptr,~0,cptr->info->default_value);
}
+ pvr2_hdw_cx25840_vbi_hack(hdw);
+
/* Set up special default values for the television and radio
frequencies here. It's not really important what these defaults
are, but I set them to something usable in the Chicago area just
@@ -2954,6 +2960,7 @@
vs = hdw->std_mask_cur;
v4l2_device_call_all(&hdw->v4l2_dev, 0,
core, s_std, vs);
+ pvr2_hdw_cx25840_vbi_hack(hdw);
}
hdw->tuner_signal_stale = !0;
hdw->cropcap_stale = !0;
@@ -4076,6 +4083,7 @@
if (hdw->decoder_client_id) {
v4l2_device_call_all(&hdw->v4l2_dev, hdw->decoder_client_id,
core, reset, 0);
+ pvr2_hdw_cx25840_vbi_hack(hdw);
return 0;
}
pvr2_trace(PVR2_TRACE_INIT,
diff --git a/drivers/media/video/pvrusb2/pvrusb2-video-v4l.c b/drivers/media/video/pvrusb2/pvrusb2-video-v4l.c
index d2fe7c8..4c96cf4 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-video-v4l.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-video-v4l.c
@@ -54,6 +54,11 @@
[PVR2_CVAL_INPUT_SVIDEO] = SAA7115_SVIDEO2,
};
+static const struct routing_scheme routing_def0 = {
+ .def = routing_scheme0,
+ .cnt = ARRAY_SIZE(routing_scheme0),
+};
+
static const int routing_scheme1[] = {
[PVR2_CVAL_INPUT_TV] = SAA7115_COMPOSITE4,
[PVR2_CVAL_INPUT_RADIO] = SAA7115_COMPOSITE5,
@@ -61,15 +66,14 @@
[PVR2_CVAL_INPUT_SVIDEO] = SAA7115_SVIDEO2, /* or SVIDEO0, it seems */
};
-static const struct routing_scheme routing_schemes[] = {
- [PVR2_ROUTING_SCHEME_HAUPPAUGE] = {
- .def = routing_scheme0,
- .cnt = ARRAY_SIZE(routing_scheme0),
- },
- [PVR2_ROUTING_SCHEME_ONAIR] = {
- .def = routing_scheme1,
- .cnt = ARRAY_SIZE(routing_scheme1),
- },
+static const struct routing_scheme routing_def1 = {
+ .def = routing_scheme1,
+ .cnt = ARRAY_SIZE(routing_scheme1),
+};
+
+static const struct routing_scheme *routing_schemes[] = {
+ [PVR2_ROUTING_SCHEME_HAUPPAUGE] = &routing_def0,
+ [PVR2_ROUTING_SCHEME_ONAIR] = &routing_def1,
};
void pvr2_saa7115_subdev_update(struct pvr2_hdw *hdw, struct v4l2_subdev *sd)
@@ -81,12 +85,12 @@
pvr2_trace(PVR2_TRACE_CHIPS, "subdev v4l2 set_input(%d)",
hdw->input_val);
- if ((sid < ARRAY_SIZE(routing_schemes)) &&
- ((sp = routing_schemes + sid) != NULL) &&
- (hdw->input_val >= 0) &&
- (hdw->input_val < sp->cnt)) {
- input = sp->def[hdw->input_val];
- } else {
+
+ sp = (sid < ARRAY_SIZE(routing_schemes)) ?
+ routing_schemes[sid] : NULL;
+ if ((sp == NULL) ||
+ (hdw->input_val < 0) ||
+ (hdw->input_val >= sp->cnt)) {
pvr2_trace(PVR2_TRACE_ERROR_LEGS,
"*** WARNING *** subdev v4l2 set_input:"
" Invalid routing scheme (%u)"
@@ -94,6 +98,7 @@
sid, hdw->input_val);
return;
}
+ input = sp->def[hdw->input_val];
sd->ops->video->s_routing(sd, input, 0, 0);
}
}
diff --git a/drivers/media/video/pxa_camera.c b/drivers/media/video/pxa_camera.c
index f60de40..46e0d8a 100644
--- a/drivers/media/video/pxa_camera.c
+++ b/drivers/media/video/pxa_camera.c
@@ -163,13 +163,6 @@
CICR0_EOFM | CICR0_FOM)
/*
- * YUV422P picture size should be a multiple of 16, so the heuristic aligns
- * height, width on 4 byte boundaries to reach the 16 multiple for the size.
- */
-#define YUV422P_X_Y_ALIGN 4
-#define YUV422P_SIZE_ALIGN YUV422P_X_Y_ALIGN * YUV422P_X_Y_ALIGN
-
-/*
* Structures
*/
enum pxa_camera_active_dma {
@@ -1398,28 +1391,15 @@
return -EINVAL;
}
- /* limit to pxa hardware capabilities */
- if (pix->height < 32)
- pix->height = 32;
- if (pix->height > 2048)
- pix->height = 2048;
- if (pix->width < 48)
- pix->width = 48;
- if (pix->width > 2048)
- pix->width = 2048;
- pix->width &= ~0x01;
-
/*
- * YUV422P planar format requires images size to be a 16 bytes
- * multiple. If not, zeros will be inserted between Y and U planes, and
- * U and V planes, and YUV422P standard would be violated.
+ * Limit to pxa hardware capabilities. YUV422P planar format requires
+ * images size to be a multiple of 16 bytes. If not, zeros will be
+ * inserted between Y and U planes, and U and V planes, which violates
+ * the YUV422P standard.
*/
- if (xlate->host_fmt->fourcc == V4L2_PIX_FMT_YUV422P) {
- if (!IS_ALIGNED(pix->width * pix->height, YUV422P_SIZE_ALIGN))
- pix->height = ALIGN(pix->height, YUV422P_X_Y_ALIGN);
- if (!IS_ALIGNED(pix->width * pix->height, YUV422P_SIZE_ALIGN))
- pix->width = ALIGN(pix->width, YUV422P_X_Y_ALIGN);
- }
+ v4l_bound_align_image(&pix->width, 48, 2048, 1,
+ &pix->height, 32, 2048, 0,
+ xlate->host_fmt->fourcc == V4L2_PIX_FMT_YUV422P ? 4 : 0);
pix->bytesperline = pix->width *
DIV_ROUND_UP(xlate->host_fmt->depth, 8);
diff --git a/drivers/media/video/saa7134/saa7134-video.c b/drivers/media/video/saa7134/saa7134-video.c
index e305c16..ba87128 100644
--- a/drivers/media/video/saa7134/saa7134-video.c
+++ b/drivers/media/video/saa7134/saa7134-video.c
@@ -1640,15 +1640,8 @@
}
f->fmt.pix.field = field;
- if (f->fmt.pix.width < 48)
- f->fmt.pix.width = 48;
- if (f->fmt.pix.height < 32)
- f->fmt.pix.height = 32;
- if (f->fmt.pix.width > maxw)
- f->fmt.pix.width = maxw;
- if (f->fmt.pix.height > maxh)
- f->fmt.pix.height = maxh;
- f->fmt.pix.width &= ~0x03;
+ v4l_bound_align_image(&f->fmt.pix.width, 48, maxw, 2,
+ &f->fmt.pix.height, 32, maxh, 0, 0);
f->fmt.pix.bytesperline =
(f->fmt.pix.width * fmt->depth) >> 3;
f->fmt.pix.sizeimage =
diff --git a/drivers/media/video/sh_mobile_ceu_camera.c b/drivers/media/video/sh_mobile_ceu_camera.c
index d369e84..0db88a5 100644
--- a/drivers/media/video/sh_mobile_ceu_camera.c
+++ b/drivers/media/video/sh_mobile_ceu_camera.c
@@ -689,16 +689,8 @@
/* FIXME: calculate using depth and bus width */
- if (f->fmt.pix.height < 4)
- f->fmt.pix.height = 4;
- if (f->fmt.pix.height > 1920)
- f->fmt.pix.height = 1920;
- if (f->fmt.pix.width < 2)
- f->fmt.pix.width = 2;
- if (f->fmt.pix.width > 2560)
- f->fmt.pix.width = 2560;
- f->fmt.pix.width &= ~0x01;
- f->fmt.pix.height &= ~0x03;
+ v4l_bound_align_image(&f->fmt.pix.width, 2, 2560, 1,
+ &f->fmt.pix.height, 4, 1920, 2, 0);
f->fmt.pix.bytesperline = f->fmt.pix.width *
DIV_ROUND_UP(xlate->host_fmt->depth, 8);
diff --git a/drivers/media/video/tcm825x.c b/drivers/media/video/tcm825x.c
index b30c492..b90e9da 100644
--- a/drivers/media/video/tcm825x.c
+++ b/drivers/media/video/tcm825x.c
@@ -878,7 +878,7 @@
return rval;
}
-static int __exit tcm825x_remove(struct i2c_client *client)
+static int tcm825x_remove(struct i2c_client *client)
{
struct tcm825x_sensor *sensor = i2c_get_clientdata(client);
@@ -902,7 +902,7 @@
.name = TCM825X_NAME,
},
.probe = tcm825x_probe,
- .remove = __exit_p(tcm825x_remove),
+ .remove = tcm825x_remove,
.id_table = tcm825x_id,
};
diff --git a/drivers/media/video/usbvideo/Kconfig b/drivers/media/video/usbvideo/Kconfig
index e4cb99c..adb1c04 100644
--- a/drivers/media/video/usbvideo/Kconfig
+++ b/drivers/media/video/usbvideo/Kconfig
@@ -38,10 +38,13 @@
module will be called konicawc.
config USB_QUICKCAM_MESSENGER
- tristate "USB Logitech Quickcam Messenger"
+ tristate "USB Logitech Quickcam Messenger (DEPRECATED)"
depends on VIDEO_V4L1
select VIDEO_USBVIDEO
---help---
+ This driver is DEPRECATED please use the gspca stv06xx module
+ instead.
+
Say Y or M here to enable support for the USB Logitech Quickcam
Messenger webcam.
diff --git a/drivers/media/video/v4l2-common.c b/drivers/media/video/v4l2-common.c
index f9647562..b91d66a 100644
--- a/drivers/media/video/v4l2-common.c
+++ b/drivers/media/video/v4l2-common.c
@@ -802,6 +802,17 @@
/* Decrease the module use count to match the first try_module_get. */
module_put(client->driver->driver.owner);
+ if (sd) {
+ /* We return errors from v4l2_subdev_call only if we have the
+ callback as the .s_config is not mandatory */
+ int err = v4l2_subdev_call(sd, core, s_config, 0, NULL);
+
+ if (err && err != -ENOIOCTLCMD) {
+ v4l2_device_unregister_subdev(sd);
+ sd = NULL;
+ }
+ }
+
error:
/* If we have a client but no subdev, then something went wrong and
we must unregister the client. */
@@ -852,6 +863,17 @@
/* Decrease the module use count to match the first try_module_get. */
module_put(client->driver->driver.owner);
+ if (sd) {
+ /* We return errors from v4l2_subdev_call only if we have the
+ callback as the .s_config is not mandatory */
+ int err = v4l2_subdev_call(sd, core, s_config, 0, NULL);
+
+ if (err && err != -ENOIOCTLCMD) {
+ v4l2_device_unregister_subdev(sd);
+ sd = NULL;
+ }
+ }
+
error:
/* If we have a client but no subdev, then something went wrong and
we must unregister the client. */
@@ -872,6 +894,89 @@
}
EXPORT_SYMBOL_GPL(v4l2_i2c_new_probed_subdev_addr);
+/* Load an i2c sub-device. */
+struct v4l2_subdev *v4l2_i2c_new_subdev_board(struct v4l2_device *v4l2_dev,
+ struct i2c_adapter *adapter, const char *module_name,
+ struct i2c_board_info *info, const unsigned short *probe_addrs)
+{
+ struct v4l2_subdev *sd = NULL;
+ struct i2c_client *client;
+
+ BUG_ON(!v4l2_dev);
+
+ if (module_name)
+ request_module(module_name);
+
+ /* Create the i2c client */
+ if (info->addr == 0 && probe_addrs)
+ client = i2c_new_probed_device(adapter, info, probe_addrs);
+ else
+ client = i2c_new_device(adapter, info);
+
+ /* Note: by loading the module first we are certain that c->driver
+ will be set if the driver was found. If the module was not loaded
+ first, then the i2c core tries to delay-load the module for us,
+ and then c->driver is still NULL until the module is finally
+ loaded. This delay-load mechanism doesn't work if other drivers
+ want to use the i2c device, so explicitly loading the module
+ is the best alternative. */
+ if (client == NULL || client->driver == NULL)
+ goto error;
+
+ /* Lock the module so we can safely get the v4l2_subdev pointer */
+ if (!try_module_get(client->driver->driver.owner))
+ goto error;
+ sd = i2c_get_clientdata(client);
+
+ /* Register with the v4l2_device which increases the module's
+ use count as well. */
+ if (v4l2_device_register_subdev(v4l2_dev, sd))
+ sd = NULL;
+ /* Decrease the module use count to match the first try_module_get. */
+ module_put(client->driver->driver.owner);
+
+ if (sd) {
+ /* We return errors from v4l2_subdev_call only if we have the
+ callback as the .s_config is not mandatory */
+ int err = v4l2_subdev_call(sd, core, s_config,
+ info->irq, info->platform_data);
+
+ if (err && err != -ENOIOCTLCMD) {
+ v4l2_device_unregister_subdev(sd);
+ sd = NULL;
+ }
+ }
+
+error:
+ /* If we have a client but no subdev, then something went wrong and
+ we must unregister the client. */
+ if (client && sd == NULL)
+ i2c_unregister_device(client);
+ return sd;
+}
+EXPORT_SYMBOL_GPL(v4l2_i2c_new_subdev_board);
+
+struct v4l2_subdev *v4l2_i2c_new_subdev_cfg(struct v4l2_device *v4l2_dev,
+ struct i2c_adapter *adapter,
+ const char *module_name, const char *client_type,
+ int irq, void *platform_data,
+ u8 addr, const unsigned short *probe_addrs)
+{
+ struct i2c_board_info info;
+
+ /* Setup the i2c board info with the device type and
+ the device address. */
+ memset(&info, 0, sizeof(info));
+ strlcpy(info.type, client_type, sizeof(info.type));
+ info.addr = addr;
+ info.irq = irq;
+ info.platform_data = platform_data;
+
+ return v4l2_i2c_new_subdev_board(v4l2_dev, adapter, module_name,
+ &info, probe_addrs);
+}
+EXPORT_SYMBOL_GPL(v4l2_i2c_new_subdev_cfg);
+
/* Return i2c client address of v4l2_subdev. */
unsigned short v4l2_i2c_subdev_addr(struct v4l2_subdev *sd)
{
@@ -916,4 +1021,78 @@
}
EXPORT_SYMBOL_GPL(v4l2_i2c_tuner_addrs);
-#endif
+#endif /* defined(CONFIG_I2C) */
+
+/* Clamp x to be between min and max, aligned to a multiple of 2^align. min
+ * and max don't have to be aligned, but there must be at least one valid
+ * value. E.g., min=17,max=31,align=4 is not allowed as there are no multiples
+ * of 16 between 17 and 31. */
+static unsigned int clamp_align(unsigned int x, unsigned int min,
+ unsigned int max, unsigned int align)
+{
+ /* Bits that must be zero to be aligned */
+ unsigned int mask = ~((1 << align) - 1);
+
+ /* Round to nearest aligned value */
+ if (align)
+ x = (x + (1 << (align - 1))) & mask;
+
+ /* Clamp to aligned value of min and max */
+ if (x < min)
+ x = (min + ~mask) & mask;
+ else if (x > max)
+ x = max & mask;
+
+ return x;
+}
+
+/* Bound an image to have a width between wmin and wmax, and height between
+ * hmin and hmax, inclusive. Additionally, the width will be a multiple of
+ * 2^walign, the height will be a multiple of 2^halign, and the overall size
+ * (width*height) will be a multiple of 2^salign. The image may be shrunk
+ * or enlarged to fit the alignment constraints.
+ *
+ * The width or height maximum must not be smaller than the corresponding
+ * minimum. The alignments must not be so high there are no possible image
+ * sizes within the allowed bounds. wmin and hmin must be at least 1
+ * (don't use 0). If you don't care about a certain alignment, specify 0,
+ * as 2^0 is 1 and one byte alignment is equivalent to no alignment. If
+ * you only want to adjust downward, specify a maximum that's the same as
+ * the initial value.
+ */
+void v4l_bound_align_image(u32 *w, unsigned int wmin, unsigned int wmax,
+ unsigned int walign,
+ u32 *h, unsigned int hmin, unsigned int hmax,
+ unsigned int halign, unsigned int salign)
+{
+ *w = clamp_align(*w, wmin, wmax, walign);
+ *h = clamp_align(*h, hmin, hmax, halign);
+
+ /* Usually we don't need to align the size and are done now. */
+ if (!salign)
+ return;
+
+ /* How much alignment do we have? */
+ walign = __ffs(*w);
+ halign = __ffs(*h);
+ /* Enough to satisfy the image alignment? */
+ if (walign + halign < salign) {
+ /* Max walign where there is still a valid width */
+ unsigned int wmaxa = __fls(wmax ^ (wmin - 1));
+ /* Max halign where there is still a valid height */
+ unsigned int hmaxa = __fls(hmax ^ (hmin - 1));
+
+ /* up the smaller alignment until we have enough */
+ do {
+ if (halign >= hmaxa ||
+ (walign <= halign && walign < wmaxa)) {
+ *w = clamp_align(*w, wmin, wmax, walign + 1);
+ walign = __ffs(*w);
+ } else {
+ *h = clamp_align(*h, hmin, hmax, halign + 1);
+ halign = __ffs(*h);
+ }
+ } while (halign + walign < salign);
+ }
+}
+EXPORT_SYMBOL_GPL(v4l_bound_align_image);
diff --git a/drivers/media/video/vivi.c b/drivers/media/video/vivi.c
index fbfefae..cd72668 100644
--- a/drivers/media/video/vivi.c
+++ b/drivers/media/video/vivi.c
@@ -883,15 +883,8 @@
maxh = norm_maxh();
f->fmt.pix.field = field;
- if (f->fmt.pix.height < 32)
- f->fmt.pix.height = 32;
- if (f->fmt.pix.height > maxh)
- f->fmt.pix.height = maxh;
- if (f->fmt.pix.width < 48)
- f->fmt.pix.width = 48;
- if (f->fmt.pix.width > maxw)
- f->fmt.pix.width = maxw;
- f->fmt.pix.width &= ~0x03;
+ v4l_bound_align_image(&f->fmt.pix.width, 48, maxw, 2,
+ &f->fmt.pix.height, 32, maxh, 0, 0);
f->fmt.pix.bytesperline =
(f->fmt.pix.width * fmt->depth) >> 3;
f->fmt.pix.sizeimage =
diff --git a/drivers/media/video/w9968cf.c b/drivers/media/video/w9968cf.c
index f59b2bd..6c3f23e 100644
--- a/drivers/media/video/w9968cf.c
+++ b/drivers/media/video/w9968cf.c
@@ -460,7 +460,7 @@
static int w9968cf_set_window(struct w9968cf_device*, struct video_window);
static int w9968cf_postprocess_frame(struct w9968cf_device*,
struct w9968cf_frame_t*);
-static int w9968cf_adjust_window_size(struct w9968cf_device*, u16* w, u16* h);
+static int w9968cf_adjust_window_size(struct w9968cf_device*, u32 *w, u32 *h);
static void w9968cf_init_framelist(struct w9968cf_device*);
static void w9968cf_push_frame(struct w9968cf_device*, u8 f_num);
static void w9968cf_pop_frame(struct w9968cf_device*,struct w9968cf_frame_t**);
@@ -1763,8 +1763,7 @@
#define UNSC(x) ((x) >> 10)
/* Make sure we are using a supported resolution */
- if ((err = w9968cf_adjust_window_size(cam, (u16*)&win.width,
- (u16*)&win.height)))
+ if ((err = w9968cf_adjust_window_size(cam, &win.width, &win.height)))
goto error;
/* Scaling factors */
@@ -1914,12 +1913,9 @@
Return 0 on success, -1 otherwise.
--------------------------------------------------------------------------*/
static int
-w9968cf_adjust_window_size(struct w9968cf_device* cam, u16* width, u16* height)
+w9968cf_adjust_window_size(struct w9968cf_device *cam, u32 *width, u32 *height)
{
- u16 maxw, maxh;
-
- if ((*width < cam->minwidth) || (*height < cam->minheight))
- return -ERANGE;
+ unsigned int maxw, maxh, align;
maxw = cam->upscaling && !(cam->vpp_flag & VPP_DECOMPRESSION) &&
w9968cf_vpp ? max((u16)W9968CF_MAX_WIDTH, cam->maxwidth)
@@ -1927,16 +1923,10 @@
maxh = cam->upscaling && !(cam->vpp_flag & VPP_DECOMPRESSION) &&
w9968cf_vpp ? max((u16)W9968CF_MAX_HEIGHT, cam->maxheight)
: cam->maxheight;
+ align = (cam->vpp_flag & VPP_DECOMPRESSION) ? 4 : 0;
- if (*width > maxw)
- *width = maxw;
- if (*height > maxh)
- *height = maxh;
-
- if (cam->vpp_flag & VPP_DECOMPRESSION) {
- *width &= ~15L; /* multiple of 16 */
- *height &= ~15L;
- }
+ v4l_bound_align_image(width, cam->minwidth, maxw, align,
+ height, cam->minheight, maxh, align, 0);
PDBGG("Window size adjusted w=%u, h=%u ", *width, *height)
@@ -3043,8 +3033,8 @@
if (win.clipcount != 0 || win.flags != 0)
return -EINVAL;
- if ((err = w9968cf_adjust_window_size(cam, (u16*)&win.width,
- (u16*)&win.height))) {
+ if ((err = w9968cf_adjust_window_size(cam, &win.width,
+ &win.height))) {
DBG(4, "Resolution not supported (%ux%u). "
"VIDIOCSWIN failed", win.width, win.height)
return err;
@@ -3116,6 +3106,7 @@
{
struct video_mmap mmap;
struct w9968cf_frame_t* fr;
+ u32 w, h;
int err = 0;
if (copy_from_user(&mmap, arg, sizeof(mmap)))
@@ -3164,8 +3155,10 @@
}
}
- if ((err = w9968cf_adjust_window_size(cam, (u16*)&mmap.width,
- (u16*)&mmap.height))) {
+ w = mmap.width; h = mmap.height;
+ err = w9968cf_adjust_window_size(cam, &w, &h);
+ mmap.width = w; mmap.height = h;
+ if (err) {
DBG(4, "Resolution not supported (%dx%d). "
"VIDIOCMCAPTURE failed",
mmap.width, mmap.height)
diff --git a/drivers/media/video/zoran/zoran_driver.c b/drivers/media/video/zoran/zoran_driver.c
index 643ccca..3d7df32 100644
--- a/drivers/media/video/zoran/zoran_driver.c
+++ b/drivers/media/video/zoran/zoran_driver.c
@@ -2088,16 +2088,10 @@
return -EINVAL;
}
- bpp = (zoran_formats[i].depth + 7) / 8;
- fmt->fmt.pix.width &= ~((bpp == 2) ? 1 : 3);
- if (fmt->fmt.pix.width > BUZ_MAX_WIDTH)
- fmt->fmt.pix.width = BUZ_MAX_WIDTH;
- if (fmt->fmt.pix.width < BUZ_MIN_WIDTH)
- fmt->fmt.pix.width = BUZ_MIN_WIDTH;
- if (fmt->fmt.pix.height > BUZ_MAX_HEIGHT)
- fmt->fmt.pix.height = BUZ_MAX_HEIGHT;
- if (fmt->fmt.pix.height < BUZ_MIN_HEIGHT)
- fmt->fmt.pix.height = BUZ_MIN_HEIGHT;
+ bpp = DIV_ROUND_UP(zoran_formats[i].depth, 8);
+ v4l_bound_align_image(
+ &fmt->fmt.pix.width, BUZ_MIN_WIDTH, BUZ_MAX_WIDTH, bpp == 2 ? 1 : 2,
+ &fmt->fmt.pix.height, BUZ_MIN_HEIGHT, BUZ_MAX_HEIGHT, 0, 0);
mutex_unlock(&zr->resource_lock);
return 0;
diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c
index 20e0b44..55ff252 100644
--- a/drivers/message/fusion/mptsas.c
+++ b/drivers/message/fusion/mptsas.c
@@ -3518,7 +3518,7 @@
} else
mptsas_volume_delete(ioc, sas_info->fw.id);
}
- mutex_lock(&ioc->sas_device_info_mutex);
+ mutex_unlock(&ioc->sas_device_info_mutex);
/* expanders */
mutex_lock(&ioc->sas_topology_mutex);
@@ -3549,7 +3549,7 @@
goto redo_expander_scan;
}
}
- mutex_lock(&ioc->sas_topology_mutex);
+ mutex_unlock(&ioc->sas_topology_mutex);
}
/**
diff --git a/drivers/mfd/twl4030-core.c b/drivers/mfd/twl4030-core.c
index cd1008c..ca54996 100644
--- a/drivers/mfd/twl4030-core.c
+++ b/drivers/mfd/twl4030-core.c
@@ -101,6 +101,12 @@
#define twl_has_usb() false
#endif
+#if defined(CONFIG_TWL4030_WATCHDOG) || \
+ defined(CONFIG_TWL4030_WATCHDOG_MODULE)
+#define twl_has_watchdog() true
+#else
+#define twl_has_watchdog() false
+#endif
/* Triton Core internal information (BEGIN) */
@@ -526,6 +532,12 @@
usb_transceiver = child;
}
+ if (twl_has_watchdog()) {
+ child = add_child(0, "twl4030_wdt", NULL, 0, false, 0, 0);
+ if (IS_ERR(child))
+ return PTR_ERR(child);
+ }
+
if (twl_has_regulator()) {
/*
child = add_regulator(TWL4030_REG_VPLL1, pdata->vpll1);
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 1dc7215..c155bd3 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1725,6 +1725,7 @@
config KS8842
tristate "Micrel KSZ8842"
+ depends on HAS_IOMEM
help
This platform driver is for Micrel KSZ8842 chip.
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 38f1c33..b70cc99 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -6825,6 +6825,14 @@
return 0;
}
+static u32
+bnx2_get_link(struct net_device *dev)
+{
+ struct bnx2 *bp = netdev_priv(dev);
+
+ return bp->link_up;
+}
+
static int
bnx2_get_eeprom_len(struct net_device *dev)
{
@@ -7392,7 +7400,7 @@
.get_wol = bnx2_get_wol,
.set_wol = bnx2_set_wol,
.nway_reset = bnx2_nway_reset,
- .get_link = ethtool_op_get_link,
+ .get_link = bnx2_get_link,
.get_eeprom_len = bnx2_get_eeprom_len,
.get_eeprom = bnx2_get_eeprom,
.set_eeprom = bnx2_set_eeprom,
diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig
index d5e18812..33821a8 100644
--- a/drivers/net/can/Kconfig
+++ b/drivers/net/can/Kconfig
@@ -36,7 +36,7 @@
If unsure, say Y.
config CAN_SJA1000
- depends on CAN_DEV
+ depends on CAN_DEV && HAS_IOMEM
tristate "Philips SJA1000"
---help---
Driver for the SJA1000 CAN controllers from Philips or NXP
diff --git a/drivers/net/cnic.c b/drivers/net/cnic.c
index 44f77eb..4d1515f 100644
--- a/drivers/net/cnic.c
+++ b/drivers/net/cnic.c
@@ -25,8 +25,6 @@
#include <linux/delay.h>
#include <linux/ethtool.h>
#include <linux/if_vlan.h>
-#include <linux/module.h>
-
#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
#define BCM_VLAN 1
#endif
@@ -2521,9 +2519,9 @@
struct cnic_dev *cdev;
struct cnic_local *cp;
struct cnic_eth_dev *ethdev = NULL;
- struct cnic_eth_dev *(*probe)(void *) = NULL;
+ struct cnic_eth_dev *(*probe)(struct net_device *) = NULL;
- probe = __symbol_get("bnx2_cnic_probe");
+ probe = symbol_get(bnx2_cnic_probe);
if (probe) {
ethdev = (*probe)(dev);
symbol_put_addr(probe);
diff --git a/drivers/net/cnic_if.h b/drivers/net/cnic_if.h
index 0638096..d1bce27 100644
--- a/drivers/net/cnic_if.h
+++ b/drivers/net/cnic_if.h
@@ -296,4 +296,6 @@
extern int cnic_unregister_driver(int ulp_type);
+extern struct cnic_eth_dev *bnx2_cnic_probe(struct net_device *dev);
+
#endif
diff --git a/drivers/net/mlx4/mr.c b/drivers/net/mlx4/mr.c
index 5887e47..f96948b 100644
--- a/drivers/net/mlx4/mr.c
+++ b/drivers/net/mlx4/mr.c
@@ -399,11 +399,14 @@
if (!mtts)
return -ENOMEM;
+ dma_sync_single_for_cpu(&dev->pdev->dev, dma_handle,
+ npages * sizeof (u64), DMA_TO_DEVICE);
+
for (i = 0; i < npages; ++i)
mtts[i] = cpu_to_be64(page_list[i] | MLX4_MTT_FLAG_PRESENT);
- dma_sync_single_for_cpu(&dev->pdev->dev, dma_handle,
- npages * sizeof (u64), DMA_TO_DEVICE);
+ dma_sync_single_for_device(&dev->pdev->dev, dma_handle,
+ npages * sizeof (u64), DMA_TO_DEVICE);
return 0;
}
@@ -547,11 +550,14 @@
/* Make sure MPT status is visible before writing MTT entries */
wmb();
+ dma_sync_single_for_cpu(&dev->pdev->dev, fmr->dma_handle,
+ npages * sizeof(u64), DMA_TO_DEVICE);
+
for (i = 0; i < npages; ++i)
fmr->mtts[i] = cpu_to_be64(page_list[i] | MLX4_MTT_FLAG_PRESENT);
- dma_sync_single_for_cpu(&dev->pdev->dev, fmr->dma_handle,
- npages * sizeof(u64), DMA_TO_DEVICE);
+ dma_sync_single_for_device(&dev->pdev->dev, fmr->dma_handle,
+ npages * sizeof(u64), DMA_TO_DEVICE);
fmr->mpt->key = cpu_to_be32(key);
fmr->mpt->lkey = cpu_to_be32(key);
diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c
index bdb143d..055bb61 100644
--- a/drivers/net/netxen/netxen_nic_init.c
+++ b/drivers/net/netxen/netxen_nic_init.c
@@ -944,28 +944,31 @@
u32 val = 0;
int retries = 60;
- if (!pegtune_val) {
- do {
- val = NXRD32(adapter, CRB_CMDPEG_STATE);
+ if (pegtune_val)
+ return 0;
- if (val == PHAN_INITIALIZE_COMPLETE ||
- val == PHAN_INITIALIZE_ACK)
- return 0;
+ do {
+ val = NXRD32(adapter, CRB_CMDPEG_STATE);
- msleep(500);
-
- } while (--retries);
-
- if (!retries) {
- pegtune_val = NXRD32(adapter,
- NETXEN_ROMUSB_GLB_PEGTUNE_DONE);
- printk(KERN_WARNING "netxen_phantom_init: init failed, "
- "pegtune_val=%x\n", pegtune_val);
- return -1;
+ switch (val) {
+ case PHAN_INITIALIZE_COMPLETE:
+ case PHAN_INITIALIZE_ACK:
+ return 0;
+ case PHAN_INITIALIZE_FAILED:
+ goto out_err;
+ default:
+ break;
}
- }
- return 0;
+ msleep(500);
+
+ } while (--retries);
+
+ NXWR32(adapter, CRB_CMDPEG_STATE, PHAN_INITIALIZE_FAILED);
+
+out_err:
+ dev_warn(&adapter->pdev->dev, "firmware init failed\n");
+ return -EIO;
}
static int
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index 71daa3d..2919a2d 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -705,7 +705,7 @@
first_driver = (adapter->ahw.pci_func == 0);
if (!first_driver)
- return 0;
+ goto wait_init;
first_boot = NXRD32(adapter, NETXEN_CAM_RAM(0x1fc));
@@ -752,6 +752,7 @@
| (_NETXEN_NIC_LINUX_SUBVERSION);
NXWR32(adapter, CRB_DRIVER_VERSION, val);
+wait_init:
/* Handshake with the card before we register the devices. */
err = netxen_phantom_init(adapter, NETXEN_NIC_PEG_TUNE);
if (err) {
@@ -1178,6 +1179,7 @@
free_netdev(netdev);
}
+#ifdef CONFIG_PM
static int
netxen_nic_suspend(struct pci_dev *pdev, pm_message_t state)
{
@@ -1242,6 +1244,7 @@
return 0;
}
+#endif
static int netxen_nic_open(struct net_device *netdev)
{
@@ -1771,8 +1774,10 @@
.id_table = netxen_pci_tbl,
.probe = netxen_nic_probe,
.remove = __devexit_p(netxen_nic_remove),
+#ifdef CONFIG_PM
.suspend = netxen_nic_suspend,
.resume = netxen_nic_resume
+#endif
};
/* Driver Registration on NetXen card */
diff --git a/drivers/net/qla3xxx.c b/drivers/net/qla3xxx.c
index bbc6d4d..3e4b67a 100644
--- a/drivers/net/qla3xxx.c
+++ b/drivers/net/qla3xxx.c
@@ -3142,6 +3142,7 @@
(void __iomem *)port_regs;
u32 delay = 10;
int status = 0;
+ unsigned long hw_flags = 0;
if(ql_mii_setup(qdev))
return -1;
@@ -3150,7 +3151,8 @@
ql_write_common_reg(qdev, &port_regs->CommonRegs.serialPortInterfaceReg,
(ISP_SERIAL_PORT_IF_WE |
(ISP_SERIAL_PORT_IF_WE << 16)));
-
+ /* Give the PHY time to come out of reset. */
+ mdelay(100);
qdev->port_link_state = LS_DOWN;
netif_carrier_off(qdev->ndev);
@@ -3350,7 +3352,9 @@
value = ql_read_page0_reg(qdev, &port_regs->portStatus);
if (value & PORT_STATUS_IC)
break;
+ spin_unlock_irqrestore(&qdev->hw_lock, hw_flags);
msleep(500);
+ spin_lock_irqsave(&qdev->hw_lock, hw_flags);
} while (--delay);
if (delay == 0) {
diff --git a/drivers/pci/hotplug/acpi_pcihp.c b/drivers/pci/hotplug/acpi_pcihp.c
index fbc63d5..eb15958 100644
--- a/drivers/pci/hotplug/acpi_pcihp.c
+++ b/drivers/pci/hotplug/acpi_pcihp.c
@@ -354,7 +354,7 @@
status = acpi_run_hpp(handle, hpp);
if (ACPI_SUCCESS(status))
break;
- if (acpi_root_bridge(handle))
+ if (acpi_is_root_bridge(handle))
break;
status = acpi_get_parent(handle, &phandle);
if (ACPI_FAILURE(status))
@@ -428,7 +428,7 @@
status = acpi_run_oshp(handle);
if (ACPI_SUCCESS(status))
goto got_one;
- if (acpi_root_bridge(handle))
+ if (acpi_is_root_bridge(handle))
break;
chandle = handle;
status = acpi_get_parent(chandle, &handle);
@@ -449,42 +449,6 @@
}
EXPORT_SYMBOL(acpi_get_hp_hw_control_from_firmware);
-/* acpi_root_bridge - check to see if this acpi object is a root bridge
- *
- * @handle - the acpi object in question.
- */
-int acpi_root_bridge(acpi_handle handle)
-{
- acpi_status status;
- struct acpi_device_info *info;
- struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
- int i;
-
- status = acpi_get_object_info(handle, &buffer);
- if (ACPI_SUCCESS(status)) {
- info = buffer.pointer;
- if ((info->valid & ACPI_VALID_HID) &&
- !strcmp(PCI_ROOT_HID_STRING,
- info->hardware_id.value)) {
- kfree(buffer.pointer);
- return 1;
- }
- if (info->valid & ACPI_VALID_CID) {
- for (i=0; i < info->compatibility_id.count; i++) {
- if (!strcmp(PCI_ROOT_HID_STRING,
- info->compatibility_id.id[i].value)) {
- kfree(buffer.pointer);
- return 1;
- }
- }
- }
- kfree(buffer.pointer);
- }
- return 0;
-}
-EXPORT_SYMBOL_GPL(acpi_root_bridge);
-
-
static int is_ejectable(acpi_handle handle)
{
acpi_status status;
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index 3a6064bc..0cb0f83 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -678,18 +678,9 @@
static struct pci_dev * get_apic_pci_info(acpi_handle handle)
{
- struct acpi_pci_id id;
- struct pci_bus *bus;
struct pci_dev *dev;
- if (ACPI_FAILURE(acpi_get_pci_id(handle, &id)))
- return NULL;
-
- bus = pci_find_bus(id.segment, id.bus);
- if (!bus)
- return NULL;
-
- dev = pci_get_slot(bus, PCI_DEVFN(id.device, id.function));
+ dev = acpi_get_pci_dev(handle);
if (!dev)
return NULL;
@@ -1396,19 +1387,16 @@
/* Program resources in newly inserted bridge */
static int acpiphp_configure_bridge (acpi_handle handle)
{
- struct acpi_pci_id pci_id;
+ struct pci_dev *dev;
struct pci_bus *bus;
- if (ACPI_FAILURE(acpi_get_pci_id(handle, &pci_id))) {
+ dev = acpi_get_pci_dev(handle);
+ if (!dev) {
err("cannot get PCI domain and bus number for bridge\n");
return -EINVAL;
}
- bus = pci_find_bus(pci_id.segment, pci_id.bus);
- if (!bus) {
- err("cannot find bus %d:%d\n",
- pci_id.segment, pci_id.bus);
- return -EINVAL;
- }
+
+ bus = dev->bus;
pci_bus_size_bridges(bus);
pci_bus_assign_resources(bus);
@@ -1416,6 +1404,7 @@
acpiphp_set_hpp_values(handle, bus);
pci_enable_bridges(bus);
acpiphp_configure_ioapics(handle);
+ pci_dev_put(dev);
return 0;
}
@@ -1631,7 +1620,7 @@
{
int *count = (int *)context;
- if (acpi_root_bridge(handle)) {
+ if (acpi_is_root_bridge(handle)) {
acpi_install_notify_handler(handle, ACPI_SYSTEM_NOTIFY,
handle_hotplug_event_bridge, NULL);
(*count)++;
diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c
index 178853a..e53eacd 100644
--- a/drivers/pci/intel-iommu.c
+++ b/drivers/pci/intel-iommu.c
@@ -39,6 +39,7 @@
#include <linux/sysdev.h>
#include <asm/cacheflush.h>
#include <asm/iommu.h>
+#include <asm/e820.h>
#include "pci.h"
#define ROOT_SIZE VTD_PAGE_SIZE
@@ -217,6 +218,14 @@
return (pte->val & 3) != 0;
}
+/*
+ * This domain is a statically identity mapping domain.
+ * 1. This domain creats a static 1:1 mapping to all usable memory.
+ * 2. It maps to each iommu if successful.
+ * 3. Each iommu mapps to this domain if successful.
+ */
+struct dmar_domain *si_domain;
+
/* devices under the same p2p bridge are owned in one domain */
#define DOMAIN_FLAG_P2P_MULTIPLE_DEVICES (1 << 0)
@@ -225,6 +234,9 @@
*/
#define DOMAIN_FLAG_VIRTUAL_MACHINE (1 << 1)
+/* si_domain contains mulitple devices */
+#define DOMAIN_FLAG_STATIC_IDENTITY (1 << 2)
+
struct dmar_domain {
int id; /* domain id */
unsigned long iommu_bmp; /* bitmap of iommus this domain uses*/
@@ -435,12 +447,14 @@
return __iommu_calculate_agaw(iommu, DEFAULT_DOMAIN_ADDRESS_WIDTH);
}
-/* in native case, each domain is related to only one iommu */
+/* This functionin only returns single iommu in a domain */
static struct intel_iommu *domain_get_iommu(struct dmar_domain *domain)
{
int iommu_id;
+ /* si_domain and vm domain should not get here. */
BUG_ON(domain->flags & DOMAIN_FLAG_VIRTUAL_MACHINE);
+ BUG_ON(domain->flags & DOMAIN_FLAG_STATIC_IDENTITY);
iommu_id = find_first_bit(&domain->iommu_bmp, g_num_of_iommus);
if (iommu_id < 0 || iommu_id >= g_num_of_iommus)
@@ -1189,48 +1203,71 @@
free_context_table(iommu);
}
-static struct dmar_domain * iommu_alloc_domain(struct intel_iommu *iommu)
+static struct dmar_domain *alloc_domain(void)
{
- unsigned long num;
- unsigned long ndomains;
struct dmar_domain *domain;
- unsigned long flags;
domain = alloc_domain_mem();
if (!domain)
return NULL;
- ndomains = cap_ndoms(iommu->cap);
-
- spin_lock_irqsave(&iommu->lock, flags);
- num = find_first_zero_bit(iommu->domain_ids, ndomains);
- if (num >= ndomains) {
- spin_unlock_irqrestore(&iommu->lock, flags);
- free_domain_mem(domain);
- printk(KERN_ERR "IOMMU: no free domain ids\n");
- return NULL;
- }
-
- set_bit(num, iommu->domain_ids);
- domain->id = num;
memset(&domain->iommu_bmp, 0, sizeof(unsigned long));
- set_bit(iommu->seq_id, &domain->iommu_bmp);
domain->flags = 0;
- iommu->domains[num] = domain;
- spin_unlock_irqrestore(&iommu->lock, flags);
return domain;
}
-static void iommu_free_domain(struct dmar_domain *domain)
+static int iommu_attach_domain(struct dmar_domain *domain,
+ struct intel_iommu *iommu)
{
+ int num;
+ unsigned long ndomains;
unsigned long flags;
- struct intel_iommu *iommu;
- iommu = domain_get_iommu(domain);
+ ndomains = cap_ndoms(iommu->cap);
spin_lock_irqsave(&iommu->lock, flags);
- clear_bit(domain->id, iommu->domain_ids);
+
+ num = find_first_zero_bit(iommu->domain_ids, ndomains);
+ if (num >= ndomains) {
+ spin_unlock_irqrestore(&iommu->lock, flags);
+ printk(KERN_ERR "IOMMU: no free domain ids\n");
+ return -ENOMEM;
+ }
+
+ domain->id = num;
+ set_bit(num, iommu->domain_ids);
+ set_bit(iommu->seq_id, &domain->iommu_bmp);
+ iommu->domains[num] = domain;
+ spin_unlock_irqrestore(&iommu->lock, flags);
+
+ return 0;
+}
+
+static void iommu_detach_domain(struct dmar_domain *domain,
+ struct intel_iommu *iommu)
+{
+ unsigned long flags;
+ int num, ndomains;
+ int found = 0;
+
+ spin_lock_irqsave(&iommu->lock, flags);
+ ndomains = cap_ndoms(iommu->cap);
+ num = find_first_bit(iommu->domain_ids, ndomains);
+ for (; num < ndomains; ) {
+ if (iommu->domains[num] == domain) {
+ found = 1;
+ break;
+ }
+ num = find_next_bit(iommu->domain_ids,
+ cap_ndoms(iommu->cap), num+1);
+ }
+
+ if (found) {
+ clear_bit(num, iommu->domain_ids);
+ clear_bit(iommu->seq_id, &domain->iommu_bmp);
+ iommu->domains[num] = NULL;
+ }
spin_unlock_irqrestore(&iommu->lock, flags);
}
@@ -1350,6 +1387,8 @@
static void domain_exit(struct dmar_domain *domain)
{
+ struct dmar_drhd_unit *drhd;
+ struct intel_iommu *iommu;
u64 end;
/* Domain 0 is reserved, so dont process it */
@@ -1368,7 +1407,10 @@
/* free page tables */
dma_pte_free_pagetable(domain, 0, end);
- iommu_free_domain(domain);
+ for_each_active_iommu(iommu, drhd)
+ if (test_bit(iommu->seq_id, &domain->iommu_bmp))
+ iommu_detach_domain(domain, iommu);
+
free_domain_mem(domain);
}
@@ -1408,7 +1450,8 @@
id = domain->id;
pgd = domain->pgd;
- if (domain->flags & DOMAIN_FLAG_VIRTUAL_MACHINE) {
+ if (domain->flags & DOMAIN_FLAG_VIRTUAL_MACHINE ||
+ domain->flags & DOMAIN_FLAG_STATIC_IDENTITY) {
int found = 0;
/* find an available domain id for this device in iommu */
@@ -1433,6 +1476,7 @@
}
set_bit(num, iommu->domain_ids);
+ set_bit(iommu->seq_id, &domain->iommu_bmp);
iommu->domains[num] = domain;
id = num;
}
@@ -1675,6 +1719,7 @@
unsigned long flags;
int bus = 0, devfn = 0;
int segment;
+ int ret;
domain = find_domain(pdev);
if (domain)
@@ -1707,6 +1752,10 @@
}
}
+ domain = alloc_domain();
+ if (!domain)
+ goto error;
+
/* Allocate new domain for the device */
drhd = dmar_find_matched_drhd_unit(pdev);
if (!drhd) {
@@ -1716,9 +1765,11 @@
}
iommu = drhd->iommu;
- domain = iommu_alloc_domain(iommu);
- if (!domain)
+ ret = iommu_attach_domain(domain, iommu);
+ if (ret) {
+ domain_exit(domain);
goto error;
+ }
if (domain_init(domain, gaw)) {
domain_exit(domain);
@@ -1792,6 +1843,8 @@
return find_domain(pdev);
}
+static int iommu_identity_mapping;
+
static int iommu_prepare_identity_map(struct pci_dev *pdev,
unsigned long long start,
unsigned long long end)
@@ -1804,8 +1857,11 @@
printk(KERN_INFO
"IOMMU: Setting identity map for device %s [0x%Lx - 0x%Lx]\n",
pci_name(pdev), start, end);
- /* page table init */
- domain = get_domain_for_dev(pdev, DEFAULT_DOMAIN_ADDRESS_WIDTH);
+ if (iommu_identity_mapping)
+ domain = si_domain;
+ else
+ /* page table init */
+ domain = get_domain_for_dev(pdev, DEFAULT_DOMAIN_ADDRESS_WIDTH);
if (!domain)
return -ENOMEM;
@@ -1952,7 +2008,110 @@
return 0;
}
-static int __init init_dmars(void)
+static int md_domain_init(struct dmar_domain *domain, int guest_width);
+static int si_domain_init(void)
+{
+ struct dmar_drhd_unit *drhd;
+ struct intel_iommu *iommu;
+ int ret = 0;
+
+ si_domain = alloc_domain();
+ if (!si_domain)
+ return -EFAULT;
+
+
+ for_each_active_iommu(iommu, drhd) {
+ ret = iommu_attach_domain(si_domain, iommu);
+ if (ret) {
+ domain_exit(si_domain);
+ return -EFAULT;
+ }
+ }
+
+ if (md_domain_init(si_domain, DEFAULT_DOMAIN_ADDRESS_WIDTH)) {
+ domain_exit(si_domain);
+ return -EFAULT;
+ }
+
+ si_domain->flags = DOMAIN_FLAG_STATIC_IDENTITY;
+
+ return 0;
+}
+
+static void domain_remove_one_dev_info(struct dmar_domain *domain,
+ struct pci_dev *pdev);
+static int identity_mapping(struct pci_dev *pdev)
+{
+ struct device_domain_info *info;
+
+ if (likely(!iommu_identity_mapping))
+ return 0;
+
+
+ list_for_each_entry(info, &si_domain->devices, link)
+ if (info->dev == pdev)
+ return 1;
+ return 0;
+}
+
+static int domain_add_dev_info(struct dmar_domain *domain,
+ struct pci_dev *pdev)
+{
+ struct device_domain_info *info;
+ unsigned long flags;
+
+ info = alloc_devinfo_mem();
+ if (!info)
+ return -ENOMEM;
+
+ info->segment = pci_domain_nr(pdev->bus);
+ info->bus = pdev->bus->number;
+ info->devfn = pdev->devfn;
+ info->dev = pdev;
+ info->domain = domain;
+
+ spin_lock_irqsave(&device_domain_lock, flags);
+ list_add(&info->link, &domain->devices);
+ list_add(&info->global, &device_domain_list);
+ pdev->dev.archdata.iommu = info;
+ spin_unlock_irqrestore(&device_domain_lock, flags);
+
+ return 0;
+}
+
+static int iommu_prepare_static_identity_mapping(void)
+{
+ int i;
+ struct pci_dev *pdev = NULL;
+ int ret;
+
+ ret = si_domain_init();
+ if (ret)
+ return -EFAULT;
+
+ printk(KERN_INFO "IOMMU: Setting identity map:\n");
+ for_each_pci_dev(pdev) {
+ for (i = 0; i < e820.nr_map; i++) {
+ struct e820entry *ei = &e820.map[i];
+
+ if (ei->type == E820_RAM) {
+ ret = iommu_prepare_identity_map(pdev,
+ ei->addr, ei->addr + ei->size);
+ if (ret) {
+ printk(KERN_INFO "1:1 mapping to one domain failed.\n");
+ return -EFAULT;
+ }
+ }
+ }
+ ret = domain_add_dev_info(si_domain, pdev);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+int __init init_dmars(void)
{
struct dmar_drhd_unit *drhd;
struct dmar_rmrr_unit *rmrr;
@@ -1962,6 +2121,13 @@
int pass_through = 1;
/*
+ * In case pass through can not be enabled, iommu tries to use identity
+ * mapping.
+ */
+ if (iommu_pass_through)
+ iommu_identity_mapping = 1;
+
+ /*
* for each drhd
* allocate root
* initialize and program root entry to not present
@@ -2090,9 +2256,12 @@
/*
* If pass through is not set or not enabled, setup context entries for
- * identity mappings for rmrr, gfx, and isa.
+ * identity mappings for rmrr, gfx, and isa and may fall back to static
+ * identity mapping if iommu_identity_mapping is set.
*/
if (!iommu_pass_through) {
+ if (iommu_identity_mapping)
+ iommu_prepare_static_identity_mapping();
/*
* For each rmrr
* for each dev attached to rmrr
@@ -2107,6 +2276,7 @@
* endfor
* endfor
*/
+ printk(KERN_INFO "IOMMU: Setting RMRR:\n");
for_each_rmrr_units(rmrr) {
for (i = 0; i < rmrr->devices_cnt; i++) {
pdev = rmrr->devices[i];
@@ -2248,6 +2418,52 @@
return domain;
}
+static int iommu_dummy(struct pci_dev *pdev)
+{
+ return pdev->dev.archdata.iommu == DUMMY_DEVICE_DOMAIN_INFO;
+}
+
+/* Check if the pdev needs to go through non-identity map and unmap process.*/
+static int iommu_no_mapping(struct pci_dev *pdev)
+{
+ int found;
+
+ if (!iommu_identity_mapping)
+ return iommu_dummy(pdev);
+
+ found = identity_mapping(pdev);
+ if (found) {
+ if (pdev->dma_mask > DMA_BIT_MASK(32))
+ return 1;
+ else {
+ /*
+ * 32 bit DMA is removed from si_domain and fall back
+ * to non-identity mapping.
+ */
+ domain_remove_one_dev_info(si_domain, pdev);
+ printk(KERN_INFO "32bit %s uses non-identity mapping\n",
+ pci_name(pdev));
+ return 0;
+ }
+ } else {
+ /*
+ * In case of a detached 64 bit DMA device from vm, the device
+ * is put into si_domain for identity mapping.
+ */
+ if (pdev->dma_mask > DMA_BIT_MASK(32)) {
+ int ret;
+ ret = domain_add_dev_info(si_domain, pdev);
+ if (!ret) {
+ printk(KERN_INFO "64bit %s uses identity mapping\n",
+ pci_name(pdev));
+ return 1;
+ }
+ }
+ }
+
+ return iommu_dummy(pdev);
+}
+
static dma_addr_t __intel_map_single(struct device *hwdev, phys_addr_t paddr,
size_t size, int dir, u64 dma_mask)
{
@@ -2260,7 +2476,8 @@
struct intel_iommu *iommu;
BUG_ON(dir == DMA_NONE);
- if (pdev->dev.archdata.iommu == DUMMY_DEVICE_DOMAIN_INFO)
+
+ if (iommu_no_mapping(pdev))
return paddr;
domain = get_valid_domain_for_dev(pdev);
@@ -2401,8 +2618,9 @@
struct iova *iova;
struct intel_iommu *iommu;
- if (pdev->dev.archdata.iommu == DUMMY_DEVICE_DOMAIN_INFO)
+ if (iommu_no_mapping(pdev))
return;
+
domain = find_domain(pdev);
BUG_ON(!domain);
@@ -2492,7 +2710,7 @@
struct scatterlist *sg;
struct intel_iommu *iommu;
- if (pdev->dev.archdata.iommu == DUMMY_DEVICE_DOMAIN_INFO)
+ if (iommu_no_mapping(pdev))
return;
domain = find_domain(pdev);
@@ -2553,7 +2771,7 @@
struct intel_iommu *iommu;
BUG_ON(dir == DMA_NONE);
- if (pdev->dev.archdata.iommu == DUMMY_DEVICE_DOMAIN_INFO)
+ if (iommu_no_mapping(pdev))
return intel_nontranslate_map_sg(hwdev, sglist, nelems, dir);
domain = get_valid_domain_for_dev(pdev);
@@ -2951,31 +3169,6 @@
return 0;
}
-static int vm_domain_add_dev_info(struct dmar_domain *domain,
- struct pci_dev *pdev)
-{
- struct device_domain_info *info;
- unsigned long flags;
-
- info = alloc_devinfo_mem();
- if (!info)
- return -ENOMEM;
-
- info->segment = pci_domain_nr(pdev->bus);
- info->bus = pdev->bus->number;
- info->devfn = pdev->devfn;
- info->dev = pdev;
- info->domain = domain;
-
- spin_lock_irqsave(&device_domain_lock, flags);
- list_add(&info->link, &domain->devices);
- list_add(&info->global, &device_domain_list);
- pdev->dev.archdata.iommu = info;
- spin_unlock_irqrestore(&device_domain_lock, flags);
-
- return 0;
-}
-
static void iommu_detach_dependent_devices(struct intel_iommu *iommu,
struct pci_dev *pdev)
{
@@ -3003,7 +3196,7 @@
}
}
-static void vm_domain_remove_one_dev_info(struct dmar_domain *domain,
+static void domain_remove_one_dev_info(struct dmar_domain *domain,
struct pci_dev *pdev)
{
struct device_domain_info *info;
@@ -3136,7 +3329,7 @@
return domain;
}
-static int vm_domain_init(struct dmar_domain *domain, int guest_width)
+static int md_domain_init(struct dmar_domain *domain, int guest_width)
{
int adjust_width;
@@ -3227,7 +3420,7 @@
"intel_iommu_domain_init: dmar_domain == NULL\n");
return -ENOMEM;
}
- if (vm_domain_init(dmar_domain, DEFAULT_DOMAIN_ADDRESS_WIDTH)) {
+ if (md_domain_init(dmar_domain, DEFAULT_DOMAIN_ADDRESS_WIDTH)) {
printk(KERN_ERR
"intel_iommu_domain_init() failed\n");
vm_domain_exit(dmar_domain);
@@ -3262,8 +3455,9 @@
old_domain = find_domain(pdev);
if (old_domain) {
- if (dmar_domain->flags & DOMAIN_FLAG_VIRTUAL_MACHINE)
- vm_domain_remove_one_dev_info(old_domain, pdev);
+ if (dmar_domain->flags & DOMAIN_FLAG_VIRTUAL_MACHINE ||
+ dmar_domain->flags & DOMAIN_FLAG_STATIC_IDENTITY)
+ domain_remove_one_dev_info(old_domain, pdev);
else
domain_remove_dev_info(old_domain);
}
@@ -3285,7 +3479,7 @@
return -EFAULT;
}
- ret = vm_domain_add_dev_info(dmar_domain, pdev);
+ ret = domain_add_dev_info(dmar_domain, pdev);
if (ret)
return ret;
@@ -3299,7 +3493,7 @@
struct dmar_domain *dmar_domain = domain->priv;
struct pci_dev *pdev = to_pci_dev(dev);
- vm_domain_remove_one_dev_info(dmar_domain, pdev);
+ domain_remove_one_dev_info(dmar_domain, pdev);
}
static int intel_iommu_map_range(struct iommu_domain *domain,
diff --git a/drivers/pci/intr_remapping.c b/drivers/pci/intr_remapping.c
index 1e83c8c..4f5b871 100644
--- a/drivers/pci/intr_remapping.c
+++ b/drivers/pci/intr_remapping.c
@@ -10,6 +10,8 @@
#include <linux/intel-iommu.h>
#include "intr_remapping.h"
#include <acpi/acpi.h>
+#include <asm/pci-direct.h>
+#include "pci.h"
static struct ioapic_scope ir_ioapic[MAX_IO_APICS];
static int ir_ioapic_num;
@@ -314,7 +316,8 @@
index = irq_iommu->irte_index + irq_iommu->sub_handle;
irte = &iommu->ir_table->base[index];
- set_64bit((unsigned long *)irte, irte_modified->low);
+ set_64bit((unsigned long *)&irte->low, irte_modified->low);
+ set_64bit((unsigned long *)&irte->high, irte_modified->high);
__iommu_flush_cache(iommu, irte, sizeof(*irte));
rc = qi_flush_iec(iommu, index, 0);
@@ -369,12 +372,32 @@
return drhd->iommu;
}
+static int clear_entries(struct irq_2_iommu *irq_iommu)
+{
+ struct irte *start, *entry, *end;
+ struct intel_iommu *iommu;
+ int index;
+
+ if (irq_iommu->sub_handle)
+ return 0;
+
+ iommu = irq_iommu->iommu;
+ index = irq_iommu->irte_index + irq_iommu->sub_handle;
+
+ start = iommu->ir_table->base + index;
+ end = start + (1 << irq_iommu->irte_mask);
+
+ for (entry = start; entry < end; entry++) {
+ set_64bit((unsigned long *)&entry->low, 0);
+ set_64bit((unsigned long *)&entry->high, 0);
+ }
+
+ return qi_flush_iec(iommu, index, irq_iommu->irte_mask);
+}
+
int free_irte(int irq)
{
int rc = 0;
- int index, i;
- struct irte *irte;
- struct intel_iommu *iommu;
struct irq_2_iommu *irq_iommu;
unsigned long flags;
@@ -385,16 +408,7 @@
return -1;
}
- iommu = irq_iommu->iommu;
-
- index = irq_iommu->irte_index + irq_iommu->sub_handle;
- irte = &iommu->ir_table->base[index];
-
- if (!irq_iommu->sub_handle) {
- for (i = 0; i < (1 << irq_iommu->irte_mask); i++)
- set_64bit((unsigned long *)(irte + i), 0);
- rc = qi_flush_iec(iommu, index, irq_iommu->irte_mask);
- }
+ rc = clear_entries(irq_iommu);
irq_iommu->iommu = NULL;
irq_iommu->irte_index = 0;
@@ -406,6 +420,91 @@
return rc;
}
+/*
+ * source validation type
+ */
+#define SVT_NO_VERIFY 0x0 /* no verification is required */
+#define SVT_VERIFY_SID_SQ 0x1 /* verify using SID and SQ fiels */
+#define SVT_VERIFY_BUS 0x2 /* verify bus of request-id */
+
+/*
+ * source-id qualifier
+ */
+#define SQ_ALL_16 0x0 /* verify all 16 bits of request-id */
+#define SQ_13_IGNORE_1 0x1 /* verify most significant 13 bits, ignore
+ * the third least significant bit
+ */
+#define SQ_13_IGNORE_2 0x2 /* verify most significant 13 bits, ignore
+ * the second and third least significant bits
+ */
+#define SQ_13_IGNORE_3 0x3 /* verify most significant 13 bits, ignore
+ * the least three significant bits
+ */
+
+/*
+ * set SVT, SQ and SID fields of irte to verify
+ * source ids of interrupt requests
+ */
+static void set_irte_sid(struct irte *irte, unsigned int svt,
+ unsigned int sq, unsigned int sid)
+{
+ irte->svt = svt;
+ irte->sq = sq;
+ irte->sid = sid;
+}
+
+int set_ioapic_sid(struct irte *irte, int apic)
+{
+ int i;
+ u16 sid = 0;
+
+ if (!irte)
+ return -1;
+
+ for (i = 0; i < MAX_IO_APICS; i++) {
+ if (ir_ioapic[i].id == apic) {
+ sid = (ir_ioapic[i].bus << 8) | ir_ioapic[i].devfn;
+ break;
+ }
+ }
+
+ if (sid == 0) {
+ pr_warning("Failed to set source-id of IOAPIC (%d)\n", apic);
+ return -1;
+ }
+
+ set_irte_sid(irte, 1, 0, sid);
+
+ return 0;
+}
+
+int set_msi_sid(struct irte *irte, struct pci_dev *dev)
+{
+ struct pci_dev *bridge;
+
+ if (!irte || !dev)
+ return -1;
+
+ /* PCIe device or Root Complex integrated PCI device */
+ if (dev->is_pcie || !dev->bus->parent) {
+ set_irte_sid(irte, SVT_VERIFY_SID_SQ, SQ_ALL_16,
+ (dev->bus->number << 8) | dev->devfn);
+ return 0;
+ }
+
+ bridge = pci_find_upstream_pcie_bridge(dev);
+ if (bridge) {
+ if (bridge->is_pcie) /* this is a PCIE-to-PCI/PCIX bridge */
+ set_irte_sid(irte, SVT_VERIFY_BUS, SQ_ALL_16,
+ (bridge->bus->number << 8) | dev->bus->number);
+ else /* this is a legacy PCI bridge */
+ set_irte_sid(irte, SVT_VERIFY_SID_SQ, SQ_ALL_16,
+ (bridge->bus->number << 8) | bridge->devfn);
+ }
+
+ return 0;
+}
+
static void iommu_set_intr_remapping(struct intel_iommu *iommu, int mode)
{
u64 addr;
@@ -612,6 +711,35 @@
return -1;
}
+static void ir_parse_one_ioapic_scope(struct acpi_dmar_device_scope *scope,
+ struct intel_iommu *iommu)
+{
+ struct acpi_dmar_pci_path *path;
+ u8 bus;
+ int count;
+
+ bus = scope->bus;
+ path = (struct acpi_dmar_pci_path *)(scope + 1);
+ count = (scope->length - sizeof(struct acpi_dmar_device_scope))
+ / sizeof(struct acpi_dmar_pci_path);
+
+ while (--count > 0) {
+ /*
+ * Access PCI directly due to the PCI
+ * subsystem isn't initialized yet.
+ */
+ bus = read_pci_config_byte(bus, path->dev, path->fn,
+ PCI_SECONDARY_BUS);
+ path++;
+ }
+
+ ir_ioapic[ir_ioapic_num].bus = bus;
+ ir_ioapic[ir_ioapic_num].devfn = PCI_DEVFN(path->dev, path->fn);
+ ir_ioapic[ir_ioapic_num].iommu = iommu;
+ ir_ioapic[ir_ioapic_num].id = scope->enumeration_id;
+ ir_ioapic_num++;
+}
+
static int ir_parse_ioapic_scope(struct acpi_dmar_header *header,
struct intel_iommu *iommu)
{
@@ -636,9 +764,7 @@
" 0x%Lx\n", scope->enumeration_id,
drhd->address);
- ir_ioapic[ir_ioapic_num].iommu = iommu;
- ir_ioapic[ir_ioapic_num].id = scope->enumeration_id;
- ir_ioapic_num++;
+ ir_parse_one_ioapic_scope(scope, iommu);
}
start += scope->length;
}
diff --git a/drivers/pci/intr_remapping.h b/drivers/pci/intr_remapping.h
index ca48f0d..63a263c 100644
--- a/drivers/pci/intr_remapping.h
+++ b/drivers/pci/intr_remapping.h
@@ -3,6 +3,8 @@
struct ioapic_scope {
struct intel_iommu *iommu;
unsigned int id;
+ unsigned int bus; /* PCI bus number */
+ unsigned int devfn; /* PCI devfn number */
};
#define IR_X2APIC_MODE(mode) (mode ? (1 << 11) : 0)
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index c682ac5..fee6a40 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -34,10 +34,27 @@
If you have an ACPI-WMI compatible Acer/ Wistron laptop, say Y or M
here.
+config ACERHDF
+ tristate "Acer Aspire One temperature and fan driver"
+ depends on THERMAL && THERMAL_HWMON && ACPI
+ ---help---
+ This is a driver for Acer Aspire One netbooks. It allows to access
+ the temperature sensor and to control the fan.
+
+ After loading this driver the BIOS is still in control of the fan.
+ To let the kernel handle the fan, do:
+ echo -n enabled > /sys/class/thermal/thermal_zone0/mode
+
+ For more information about this driver see
+ <http://piie.net/files/acerhdf_README.txt>
+
+ If you have an Acer Aspire One netbook, say Y or M
+ here.
+
config ASUS_LAPTOP
- tristate "Asus Laptop Extras (EXPERIMENTAL)"
+ tristate "Asus Laptop Extras"
depends on ACPI
- depends on EXPERIMENTAL && !ACPI_ASUS
+ depends on !ACPI_ASUS
select LEDS_CLASS
select NEW_LEDS
select BACKLIGHT_CLASS_DEVICE
@@ -45,12 +62,12 @@
---help---
This is the new Linux driver for Asus laptops. It may also support some
MEDION, JVC or VICTOR laptops. It makes all the extra buttons generate
- standard ACPI events that go through /proc/acpi/events. It also adds
+ standard ACPI events and input events. It also adds
support for video output switching, LCD backlight control, Bluetooth and
Wlan control, and most importantly, allows you to blink those fancy LEDs.
For more information and a userspace daemon for handling the extra
- buttons see <http://acpi4asus.sf.net/>.
+ buttons see <http://acpi4asus.sf.net>.
If you have an ACPI-compatible ASUS laptop, say Y or M here.
@@ -340,9 +357,14 @@
depends on RFKILL || RFKILL = n
select BACKLIGHT_CLASS_DEVICE
select HWMON
+ select HOTPLUG
+ select HOTPLUG_PCI if PCI
---help---
This driver supports the Fn-Fx keys on Eee PC laptops.
- It also adds the ability to switch camera/wlan on/off.
+
+ It also gives access to some extra laptop functionalities like
+ Bluetooth, backlight and allows powering on/off some other
+ devices.
If you have an Eee PC laptop, say Y or M here.
@@ -369,7 +391,7 @@
any ACPI-WMI devices.
config ACPI_ASUS
- tristate "ASUS/Medion Laptop Extras"
+ tristate "ASUS/Medion Laptop Extras (DEPRECATED)"
depends on ACPI
select BACKLIGHT_CLASS_DEVICE
---help---
@@ -390,7 +412,7 @@
parameters.
More information and a userspace daemon for handling the extra buttons
- at <http://sourceforge.net/projects/acpi4asus/>.
+ at <http://acpi4asus.sf.net>.
If you have an ACPI-compatible ASUS laptop, say Y or M here. This
driver is still under development, so if your laptop is unsupported or
diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
index e40c7bd..641b8bf 100644
--- a/drivers/platform/x86/Makefile
+++ b/drivers/platform/x86/Makefile
@@ -9,6 +9,7 @@
obj-$(CONFIG_DELL_LAPTOP) += dell-laptop.o
obj-$(CONFIG_DELL_WMI) += dell-wmi.o
obj-$(CONFIG_ACER_WMI) += acer-wmi.o
+obj-$(CONFIG_ACERHDF) += acerhdf.o
obj-$(CONFIG_HP_WMI) += hp-wmi.o
obj-$(CONFIG_TC1100_WMI) += tc1100-wmi.o
obj-$(CONFIG_SONY_LAPTOP) += sony-laptop.o
diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c
new file mode 100644
index 0000000..bdfee17
--- /dev/null
+++ b/drivers/platform/x86/acerhdf.c
@@ -0,0 +1,602 @@
+/*
+ * acerhdf - A driver which monitors the temperature
+ * of the aspire one netbook, turns on/off the fan
+ * as soon as the upper/lower threshold is reached.
+ *
+ * (C) 2009 - Peter Feuerer peter (a) piie.net
+ * http://piie.net
+ * 2009 Borislav Petkov <petkovbb@gmail.com>
+ *
+ * Inspired by and many thanks to:
+ * o acerfand - Rachel Greenham
+ * o acer_ec.pl - Michael Kurz michi.kurz (at) googlemail.com
+ * - Petr Tomasek tomasek (#) etf,cuni,cz
+ * - Carlos Corbacho cathectic (at) gmail.com
+ * o lkml - Matthew Garrett
+ * - Borislav Petkov
+ * - Andreas Mohr
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#define pr_fmt(fmt) "acerhdf: " fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/dmi.h>
+#include <acpi/acpi_drivers.h>
+#include <linux/sched.h>
+#include <linux/thermal.h>
+#include <linux/platform_device.h>
+
+/*
+ * The driver is started with "kernel mode off" by default. That means, the BIOS
+ * is still in control of the fan. In this mode the driver allows to read the
+ * temperature of the cpu and a userspace tool may take over control of the fan.
+ * If the driver is switched to "kernel mode" (e.g. via module parameter) the
+ * driver is in full control of the fan. If you want the module to be started in
+ * kernel mode by default, define the following:
+ */
+#undef START_IN_KERNEL_MODE
+
+#define DRV_VER "0.5.13"
+
+/*
+ * According to the Atom N270 datasheet,
+ * (http://download.intel.com/design/processor/datashts/320032.pdf) the
+ * CPU's optimal operating limits denoted in junction temperature as
+ * measured by the on-die thermal monitor are within 0 <= Tj <= 90. So,
+ * assume 89°C is critical temperature.
+ */
+#define ACERHDF_TEMP_CRIT 89
+#define ACERHDF_FAN_OFF 0
+#define ACERHDF_FAN_AUTO 1
+
+/*
+ * No matter what value the user puts into the fanon variable, turn on the fan
+ * at 80 degree Celsius to prevent hardware damage
+ */
+#define ACERHDF_MAX_FANON 80
+
+/*
+ * Maximum interval between two temperature checks is 15 seconds, as the die
+ * can get hot really fast under heavy load (plus we shouldn't forget about
+ * possible impact of _external_ aggressive sources such as heaters, sun etc.)
+ */
+#define ACERHDF_MAX_INTERVAL 15
+
+#ifdef START_IN_KERNEL_MODE
+static int kernelmode = 1;
+#else
+static int kernelmode;
+#endif
+
+static unsigned int interval = 10;
+static unsigned int fanon = 63;
+static unsigned int fanoff = 58;
+static unsigned int verbose;
+static unsigned int fanstate = ACERHDF_FAN_AUTO;
+static char force_bios[16];
+static unsigned int prev_interval;
+struct thermal_zone_device *thz_dev;
+struct thermal_cooling_device *cl_dev;
+struct platform_device *acerhdf_dev;
+
+module_param(kernelmode, uint, 0);
+MODULE_PARM_DESC(kernelmode, "Kernel mode fan control on / off");
+module_param(interval, uint, 0600);
+MODULE_PARM_DESC(interval, "Polling interval of temperature check");
+module_param(fanon, uint, 0600);
+MODULE_PARM_DESC(fanon, "Turn the fan on above this temperature");
+module_param(fanoff, uint, 0600);
+MODULE_PARM_DESC(fanoff, "Turn the fan off below this temperature");
+module_param(verbose, uint, 0600);
+MODULE_PARM_DESC(verbose, "Enable verbose dmesg output");
+module_param_string(force_bios, force_bios, 16, 0);
+MODULE_PARM_DESC(force_bios, "Force BIOS version and omit BIOS check");
+
+/* BIOS settings */
+struct bios_settings_t {
+ const char *vendor;
+ const char *version;
+ unsigned char fanreg;
+ unsigned char tempreg;
+ unsigned char fancmd[2]; /* fan off and auto commands */
+};
+
+/* Register addresses and values for different BIOS versions */
+static const struct bios_settings_t bios_tbl[] = {
+ {"Acer", "v0.3109", 0x55, 0x58, {0x1f, 0x00} },
+ {"Acer", "v0.3114", 0x55, 0x58, {0x1f, 0x00} },
+ {"Acer", "v0.3301", 0x55, 0x58, {0xaf, 0x00} },
+ {"Acer", "v0.3304", 0x55, 0x58, {0xaf, 0x00} },
+ {"Acer", "v0.3305", 0x55, 0x58, {0xaf, 0x00} },
+ {"Acer", "v0.3308", 0x55, 0x58, {0x21, 0x00} },
+ {"Acer", "v0.3309", 0x55, 0x58, {0x21, 0x00} },
+ {"Acer", "v0.3310", 0x55, 0x58, {0x21, 0x00} },
+ {"Gateway", "v0.3103", 0x55, 0x58, {0x21, 0x00} },
+ {"Packard Bell", "v0.3105", 0x55, 0x58, {0x21, 0x00} },
+ {"", "", 0, 0, {0, 0} }
+};
+
+static const struct bios_settings_t *bios_cfg __read_mostly;
+
+
+static int acerhdf_get_temp(int *temp)
+{
+ u8 read_temp;
+
+ if (ec_read(bios_cfg->tempreg, &read_temp))
+ return -EINVAL;
+
+ *temp = read_temp;
+
+ return 0;
+}
+
+static int acerhdf_get_fanstate(int *state)
+{
+ u8 fan;
+ bool tmp;
+
+ if (ec_read(bios_cfg->fanreg, &fan))
+ return -EINVAL;
+
+ tmp = (fan == bios_cfg->fancmd[ACERHDF_FAN_OFF]);
+ *state = tmp ? ACERHDF_FAN_OFF : ACERHDF_FAN_AUTO;
+
+ return 0;
+}
+
+static void acerhdf_change_fanstate(int state)
+{
+ unsigned char cmd;
+
+ if (verbose)
+ pr_notice("fan %s\n", (state == ACERHDF_FAN_OFF) ?
+ "OFF" : "ON");
+
+ if ((state != ACERHDF_FAN_OFF) && (state != ACERHDF_FAN_AUTO)) {
+ pr_err("invalid fan state %d requested, setting to auto!\n",
+ state);
+ state = ACERHDF_FAN_AUTO;
+ }
+
+ cmd = bios_cfg->fancmd[state];
+ fanstate = state;
+
+ ec_write(bios_cfg->fanreg, cmd);
+}
+
+static void acerhdf_check_param(struct thermal_zone_device *thermal)
+{
+ if (fanon > ACERHDF_MAX_FANON) {
+ pr_err("fanon temperature too high, set to %d\n",
+ ACERHDF_MAX_FANON);
+ fanon = ACERHDF_MAX_FANON;
+ }
+
+ if (kernelmode && prev_interval != interval) {
+ if (interval > ACERHDF_MAX_INTERVAL) {
+ pr_err("interval too high, set to %d\n",
+ ACERHDF_MAX_INTERVAL);
+ interval = ACERHDF_MAX_INTERVAL;
+ }
+ if (verbose)
+ pr_notice("interval changed to: %d\n",
+ interval);
+ thermal->polling_delay = interval*1000;
+ prev_interval = interval;
+ }
+}
+
+/*
+ * This is the thermal zone callback which does the delayed polling of the fan
+ * state. We do check /sysfs-originating settings here in acerhdf_check_param()
+ * as late as the polling interval is since we can't do that in the respective
+ * accessors of the module parameters.
+ */
+static int acerhdf_get_ec_temp(struct thermal_zone_device *thermal,
+ unsigned long *t)
+{
+ int temp, err = 0;
+
+ acerhdf_check_param(thermal);
+
+ err = acerhdf_get_temp(&temp);
+ if (err)
+ return err;
+
+ if (verbose)
+ pr_notice("temp %d\n", temp);
+
+ *t = temp;
+ return 0;
+}
+
+static int acerhdf_bind(struct thermal_zone_device *thermal,
+ struct thermal_cooling_device *cdev)
+{
+ /* if the cooling device is the one from acerhdf bind it */
+ if (cdev != cl_dev)
+ return 0;
+
+ if (thermal_zone_bind_cooling_device(thermal, 0, cdev)) {
+ pr_err("error binding cooling dev\n");
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int acerhdf_unbind(struct thermal_zone_device *thermal,
+ struct thermal_cooling_device *cdev)
+{
+ if (cdev != cl_dev)
+ return 0;
+
+ if (thermal_zone_unbind_cooling_device(thermal, 0, cdev)) {
+ pr_err("error unbinding cooling dev\n");
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static inline void acerhdf_revert_to_bios_mode(void)
+{
+ acerhdf_change_fanstate(ACERHDF_FAN_AUTO);
+ kernelmode = 0;
+ if (thz_dev)
+ thz_dev->polling_delay = 0;
+ pr_notice("kernel mode fan control OFF\n");
+}
+static inline void acerhdf_enable_kernelmode(void)
+{
+ kernelmode = 1;
+
+ thz_dev->polling_delay = interval*1000;
+ thermal_zone_device_update(thz_dev);
+ pr_notice("kernel mode fan control ON\n");
+}
+
+static int acerhdf_get_mode(struct thermal_zone_device *thermal,
+ enum thermal_device_mode *mode)
+{
+ if (verbose)
+ pr_notice("kernel mode fan control %d\n", kernelmode);
+
+ *mode = (kernelmode) ? THERMAL_DEVICE_ENABLED
+ : THERMAL_DEVICE_DISABLED;
+
+ return 0;
+}
+
+/*
+ * set operation mode;
+ * enabled: the thermal layer of the kernel takes care about
+ * the temperature and the fan.
+ * disabled: the BIOS takes control of the fan.
+ */
+static int acerhdf_set_mode(struct thermal_zone_device *thermal,
+ enum thermal_device_mode mode)
+{
+ if (mode == THERMAL_DEVICE_DISABLED && kernelmode)
+ acerhdf_revert_to_bios_mode();
+ else if (mode == THERMAL_DEVICE_ENABLED && !kernelmode)
+ acerhdf_enable_kernelmode();
+
+ return 0;
+}
+
+static int acerhdf_get_trip_type(struct thermal_zone_device *thermal, int trip,
+ enum thermal_trip_type *type)
+{
+ if (trip == 0)
+ *type = THERMAL_TRIP_ACTIVE;
+
+ return 0;
+}
+
+static int acerhdf_get_trip_temp(struct thermal_zone_device *thermal, int trip,
+ unsigned long *temp)
+{
+ if (trip == 0)
+ *temp = fanon;
+
+ return 0;
+}
+
+static int acerhdf_get_crit_temp(struct thermal_zone_device *thermal,
+ unsigned long *temperature)
+{
+ *temperature = ACERHDF_TEMP_CRIT;
+ return 0;
+}
+
+/* bind callback functions to thermalzone */
+struct thermal_zone_device_ops acerhdf_dev_ops = {
+ .bind = acerhdf_bind,
+ .unbind = acerhdf_unbind,
+ .get_temp = acerhdf_get_ec_temp,
+ .get_mode = acerhdf_get_mode,
+ .set_mode = acerhdf_set_mode,
+ .get_trip_type = acerhdf_get_trip_type,
+ .get_trip_temp = acerhdf_get_trip_temp,
+ .get_crit_temp = acerhdf_get_crit_temp,
+};
+
+
+/*
+ * cooling device callback functions
+ * get maximal fan cooling state
+ */
+static int acerhdf_get_max_state(struct thermal_cooling_device *cdev,
+ unsigned long *state)
+{
+ *state = 1;
+
+ return 0;
+}
+
+static int acerhdf_get_cur_state(struct thermal_cooling_device *cdev,
+ unsigned long *state)
+{
+ int err = 0, tmp;
+
+ err = acerhdf_get_fanstate(&tmp);
+ if (err)
+ return err;
+
+ *state = (tmp == ACERHDF_FAN_AUTO) ? 1 : 0;
+ return 0;
+}
+
+/* change current fan state - is overwritten when running in kernel mode */
+static int acerhdf_set_cur_state(struct thermal_cooling_device *cdev,
+ unsigned long state)
+{
+ int cur_temp, cur_state, err = 0;
+
+ if (!kernelmode)
+ return 0;
+
+ err = acerhdf_get_temp(&cur_temp);
+ if (err) {
+ pr_err("error reading temperature, hand off control to BIOS\n");
+ goto err_out;
+ }
+
+ err = acerhdf_get_fanstate(&cur_state);
+ if (err) {
+ pr_err("error reading fan state, hand off control to BIOS\n");
+ goto err_out;
+ }
+
+ if (state == 0) {
+ /* turn fan off only if below fanoff temperature */
+ if ((cur_state == ACERHDF_FAN_AUTO) &&
+ (cur_temp < fanoff))
+ acerhdf_change_fanstate(ACERHDF_FAN_OFF);
+ } else {
+ if (cur_state == ACERHDF_FAN_OFF)
+ acerhdf_change_fanstate(ACERHDF_FAN_AUTO);
+ }
+ return 0;
+
+err_out:
+ acerhdf_revert_to_bios_mode();
+ return -EINVAL;
+}
+
+/* bind fan callbacks to fan device */
+struct thermal_cooling_device_ops acerhdf_cooling_ops = {
+ .get_max_state = acerhdf_get_max_state,
+ .get_cur_state = acerhdf_get_cur_state,
+ .set_cur_state = acerhdf_set_cur_state,
+};
+
+/* suspend / resume functionality */
+static int acerhdf_suspend(struct platform_device *dev, pm_message_t state)
+{
+ if (kernelmode)
+ acerhdf_change_fanstate(ACERHDF_FAN_AUTO);
+
+ if (verbose)
+ pr_notice("going suspend\n");
+
+ return 0;
+}
+
+static int acerhdf_resume(struct platform_device *device)
+{
+ if (verbose)
+ pr_notice("resuming\n");
+
+ return 0;
+}
+
+static int __devinit acerhdf_probe(struct platform_device *device)
+{
+ return 0;
+}
+
+static int acerhdf_remove(struct platform_device *device)
+{
+ return 0;
+}
+
+struct platform_driver acerhdf_drv = {
+ .driver = {
+ .name = "acerhdf",
+ .owner = THIS_MODULE,
+ },
+ .probe = acerhdf_probe,
+ .remove = acerhdf_remove,
+ .suspend = acerhdf_suspend,
+ .resume = acerhdf_resume,
+};
+
+
+/* check hardware */
+static int acerhdf_check_hardware(void)
+{
+ char const *vendor, *version, *product;
+ int i;
+
+ /* get BIOS data */
+ vendor = dmi_get_system_info(DMI_SYS_VENDOR);
+ version = dmi_get_system_info(DMI_BIOS_VERSION);
+ product = dmi_get_system_info(DMI_PRODUCT_NAME);
+
+ pr_info("Acer Aspire One Fan driver, v.%s\n", DRV_VER);
+
+ if (!force_bios[0]) {
+ if (strncmp(product, "AO", 2)) {
+ pr_err("no Aspire One hardware found\n");
+ return -EINVAL;
+ }
+ } else {
+ pr_info("forcing BIOS version: %s\n", version);
+ version = force_bios;
+ kernelmode = 0;
+ }
+
+ if (verbose)
+ pr_info("BIOS info: %s %s, product: %s\n",
+ vendor, version, product);
+
+ /* search BIOS version and vendor in BIOS settings table */
+ for (i = 0; bios_tbl[i].version[0]; i++) {
+ if (!strcmp(bios_tbl[i].vendor, vendor) &&
+ !strcmp(bios_tbl[i].version, version)) {
+ bios_cfg = &bios_tbl[i];
+ break;
+ }
+ }
+
+ if (!bios_cfg) {
+ pr_err("unknown (unsupported) BIOS version %s/%s, "
+ "please report, aborting!\n", vendor, version);
+ return -EINVAL;
+ }
+
+ /*
+ * if started with kernel mode off, prevent the kernel from switching
+ * off the fan
+ */
+ if (!kernelmode) {
+ pr_notice("Fan control off, to enable do:\n");
+ pr_notice("echo -n \"enabled\" > "
+ "/sys/class/thermal/thermal_zone0/mode\n");
+ }
+
+ return 0;
+}
+
+static int acerhdf_register_platform(void)
+{
+ int err = 0;
+
+ err = platform_driver_register(&acerhdf_drv);
+ if (err)
+ return err;
+
+ acerhdf_dev = platform_device_alloc("acerhdf", -1);
+ platform_device_add(acerhdf_dev);
+
+ return 0;
+}
+
+static void acerhdf_unregister_platform(void)
+{
+ if (!acerhdf_dev)
+ return;
+
+ platform_device_del(acerhdf_dev);
+ platform_driver_unregister(&acerhdf_drv);
+}
+
+static int acerhdf_register_thermal(void)
+{
+ cl_dev = thermal_cooling_device_register("acerhdf-fan", NULL,
+ &acerhdf_cooling_ops);
+
+ if (IS_ERR(cl_dev))
+ return -EINVAL;
+
+ thz_dev = thermal_zone_device_register("acerhdf", 1, NULL,
+ &acerhdf_dev_ops, 0, 0, 0,
+ (kernelmode) ? interval*1000 : 0);
+ if (IS_ERR(thz_dev))
+ return -EINVAL;
+
+ return 0;
+}
+
+static void acerhdf_unregister_thermal(void)
+{
+ if (cl_dev) {
+ thermal_cooling_device_unregister(cl_dev);
+ cl_dev = NULL;
+ }
+
+ if (thz_dev) {
+ thermal_zone_device_unregister(thz_dev);
+ thz_dev = NULL;
+ }
+}
+
+static int __init acerhdf_init(void)
+{
+ int err = 0;
+
+ err = acerhdf_check_hardware();
+ if (err)
+ goto out_err;
+
+ err = acerhdf_register_platform();
+ if (err)
+ goto err_unreg;
+
+ err = acerhdf_register_thermal();
+ if (err)
+ goto err_unreg;
+
+ return 0;
+
+err_unreg:
+ acerhdf_unregister_thermal();
+ acerhdf_unregister_platform();
+
+out_err:
+ return -ENODEV;
+}
+
+static void __exit acerhdf_exit(void)
+{
+ acerhdf_change_fanstate(ACERHDF_FAN_AUTO);
+ acerhdf_unregister_thermal();
+ acerhdf_unregister_platform();
+}
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Peter Feuerer");
+MODULE_DESCRIPTION("Aspire One temperature and fan driver");
+MODULE_ALIAS("dmi:*:*Acer*:*:");
+MODULE_ALIAS("dmi:*:*Gateway*:*:");
+MODULE_ALIAS("dmi:*:*Packard Bell*:*:");
+
+module_init(acerhdf_init);
+module_exit(acerhdf_exit);
diff --git a/drivers/platform/x86/asus-laptop.c b/drivers/platform/x86/asus-laptop.c
index bfc1a88..db657bb 100644
--- a/drivers/platform/x86/asus-laptop.c
+++ b/drivers/platform/x86/asus-laptop.c
@@ -33,6 +33,8 @@
* Sam Lin - GPS support
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
@@ -53,9 +55,10 @@
#define ASUS_HOTK_NAME "Asus Laptop Support"
#define ASUS_HOTK_CLASS "hotkey"
#define ASUS_HOTK_DEVICE_NAME "Hotkey"
-#define ASUS_HOTK_FILE "asus-laptop"
+#define ASUS_HOTK_FILE KBUILD_MODNAME
#define ASUS_HOTK_PREFIX "\\_SB.ATKD."
+
/*
* Some events we use, same for all Asus
*/
@@ -207,13 +210,17 @@
static int asus_hotk_add(struct acpi_device *device);
static int asus_hotk_remove(struct acpi_device *device, int type);
+static void asus_hotk_notify(struct acpi_device *device, u32 event);
+
static struct acpi_driver asus_hotk_driver = {
.name = ASUS_HOTK_NAME,
.class = ASUS_HOTK_CLASS,
.ids = asus_device_ids,
+ .flags = ACPI_DRIVER_ALL_NOTIFY_EVENTS,
.ops = {
.add = asus_hotk_add,
.remove = asus_hotk_remove,
+ .notify = asus_hotk_notify,
},
};
@@ -323,7 +330,7 @@
rv = acpi_evaluate_integer(wireless_status_handle, NULL, NULL, &status);
if (ACPI_FAILURE(rv))
- printk(ASUS_WARNING "Error reading Wireless status\n");
+ pr_warning("Error reading Wireless status\n");
else
return (status & mask) ? 1 : 0;
@@ -337,7 +344,7 @@
rv = acpi_evaluate_integer(gps_status_handle, NULL, NULL, &status);
if (ACPI_FAILURE(rv))
- printk(ASUS_WARNING "Error reading GPS status\n");
+ pr_warning("Error reading GPS status\n");
else
return status ? 1 : 0;
@@ -377,7 +384,7 @@
}
if (write_acpi_int(handle, NULL, out, NULL))
- printk(ASUS_WARNING " write failed %x\n", mask);
+ pr_warning(" write failed %x\n", mask);
}
/* /sys/class/led handlers */
@@ -420,7 +427,7 @@
NULL, NULL, NULL);
if (ACPI_FAILURE(status))
- printk(ASUS_WARNING "Error switching LCD\n");
+ pr_warning("Error switching LCD\n");
}
write_status(NULL, lcd, LCD_ON);
@@ -444,7 +451,7 @@
rv = acpi_evaluate_integer(brightness_get_handle, NULL, NULL, &value);
if (ACPI_FAILURE(rv))
- printk(ASUS_WARNING "Error reading brightness\n");
+ pr_warning("Error reading brightness\n");
return value;
}
@@ -457,7 +464,7 @@
/* 0 <= value <= 15 */
if (write_acpi_int(brightness_set_handle, NULL, value, NULL)) {
- printk(ASUS_WARNING "Error changing brightness\n");
+ pr_warning("Error changing brightness\n");
ret = -EIO;
}
@@ -587,7 +594,7 @@
rv = parse_arg(buf, count, &value);
if (rv > 0) {
if (write_acpi_int(ledd_set_handle, NULL, value, NULL))
- printk(ASUS_WARNING "LED display write failed\n");
+ pr_warning("LED display write failed\n");
else
hotk->ledd_status = (u32) value;
}
@@ -632,7 +639,7 @@
{
/* no sanity check needed for now */
if (write_acpi_int(display_set_handle, NULL, value, NULL))
- printk(ASUS_WARNING "Error setting display\n");
+ pr_warning("Error setting display\n");
return;
}
@@ -647,7 +654,7 @@
rv = acpi_evaluate_integer(display_get_handle, NULL,
NULL, &value);
if (ACPI_FAILURE(rv))
- printk(ASUS_WARNING "Error reading display status\n");
+ pr_warning("Error reading display status\n");
}
value &= 0x0F; /* needed for some models, shouldn't hurt others */
@@ -689,7 +696,7 @@
static void set_light_sens_switch(int value)
{
if (write_acpi_int(ls_switch_handle, NULL, value, NULL))
- printk(ASUS_WARNING "Error setting light sensor switch\n");
+ pr_warning("Error setting light sensor switch\n");
hotk->light_switch = value;
}
@@ -714,7 +721,7 @@
static void set_light_sens_level(int value)
{
if (write_acpi_int(ls_level_handle, NULL, value, NULL))
- printk(ASUS_WARNING "Error setting light sensor level\n");
+ pr_warning("Error setting light sensor level\n");
hotk->light_level = value;
}
@@ -812,7 +819,7 @@
return -EINVAL;
}
-static void asus_hotk_notify(acpi_handle handle, u32 event, void *data)
+static void asus_hotk_notify(struct acpi_device *device, u32 event)
{
static struct key_entry *key;
u16 count;
@@ -975,11 +982,11 @@
*/
status = acpi_get_table(ACPI_SIG_DSDT, 1, &asus_info);
if (ACPI_FAILURE(status))
- printk(ASUS_WARNING "Couldn't get the DSDT table header\n");
+ pr_warning("Couldn't get the DSDT table header\n");
/* We have to write 0 on init this far for all ASUS models */
if (write_acpi_int(hotk->handle, "INIT", 0, &buffer)) {
- printk(ASUS_ERR "Hotkey initialization failed\n");
+ pr_err("Hotkey initialization failed\n");
return -ENODEV;
}
@@ -987,9 +994,9 @@
status =
acpi_evaluate_integer(hotk->handle, "BSTS", NULL, &bsts_result);
if (ACPI_FAILURE(status))
- printk(ASUS_WARNING "Error calling BSTS\n");
+ pr_warning("Error calling BSTS\n");
else if (bsts_result)
- printk(ASUS_NOTICE "BSTS called, 0x%02x returned\n",
+ pr_notice("BSTS called, 0x%02x returned\n",
(uint) bsts_result);
/* This too ... */
@@ -1020,7 +1027,7 @@
return -ENOMEM;
if (*string)
- printk(ASUS_NOTICE " %s model detected\n", string);
+ pr_notice(" %s model detected\n", string);
ASUS_HANDLE_INIT(mled_set);
ASUS_HANDLE_INIT(tled_set);
@@ -1077,7 +1084,7 @@
hotk->inputdev = input_allocate_device();
if (!hotk->inputdev) {
- printk(ASUS_INFO "Unable to allocate input device\n");
+ pr_info("Unable to allocate input device\n");
return 0;
}
hotk->inputdev->name = "Asus Laptop extra buttons";
@@ -1096,7 +1103,7 @@
}
result = input_register_device(hotk->inputdev);
if (result) {
- printk(ASUS_INFO "Unable to register input device\n");
+ pr_info("Unable to register input device\n");
input_free_device(hotk->inputdev);
}
return result;
@@ -1113,7 +1120,7 @@
if (hotk->device->status.present) {
result = asus_hotk_get_info();
} else {
- printk(ASUS_ERR "Hotkey device not present, aborting\n");
+ pr_err("Hotkey device not present, aborting\n");
return -EINVAL;
}
@@ -1124,13 +1131,12 @@
static int asus_hotk_add(struct acpi_device *device)
{
- acpi_status status = AE_OK;
int result;
if (!device)
return -EINVAL;
- printk(ASUS_NOTICE "Asus Laptop Support version %s\n",
+ pr_notice("Asus Laptop Support version %s\n",
ASUS_LAPTOP_VERSION);
hotk = kzalloc(sizeof(struct asus_hotk), GFP_KERNEL);
@@ -1149,15 +1155,6 @@
asus_hotk_add_fs();
- /*
- * We install the handler, it will receive the hotk in parameter, so, we
- * could add other data to the hotk struct
- */
- status = acpi_install_notify_handler(hotk->handle, ACPI_ALL_NOTIFY,
- asus_hotk_notify, hotk);
- if (ACPI_FAILURE(status))
- printk(ASUS_ERR "Error installing notify handler\n");
-
asus_hotk_found = 1;
/* WLED and BLED are on by default */
@@ -1198,16 +1195,9 @@
static int asus_hotk_remove(struct acpi_device *device, int type)
{
- acpi_status status = 0;
-
if (!device || !acpi_driver_data(device))
return -EINVAL;
- status = acpi_remove_notify_handler(hotk->handle, ACPI_ALL_NOTIFY,
- asus_hotk_notify);
- if (ACPI_FAILURE(status))
- printk(ASUS_ERR "Error removing notify handler\n");
-
kfree(hotk->name);
kfree(hotk);
@@ -1260,8 +1250,7 @@
bd = backlight_device_register(ASUS_HOTK_FILE, dev,
NULL, &asusbl_ops);
if (IS_ERR(bd)) {
- printk(ASUS_ERR
- "Could not register asus backlight device\n");
+ pr_err("Could not register asus backlight device\n");
asus_backlight_device = NULL;
return PTR_ERR(bd);
}
@@ -1334,7 +1323,6 @@
static int __init asus_laptop_init(void)
{
- struct device *dev;
int result;
if (acpi_disabled)
@@ -1356,24 +1344,10 @@
return -ENODEV;
}
- dev = acpi_get_physical_device(hotk->device->handle);
-
- if (!acpi_video_backlight_support()) {
- result = asus_backlight_init(dev);
- if (result)
- goto fail_backlight;
- } else
- printk(ASUS_INFO "Brightness ignored, must be controlled by "
- "ACPI video driver\n");
-
result = asus_input_init();
if (result)
goto fail_input;
- result = asus_led_init(dev);
- if (result)
- goto fail_led;
-
/* Register platform stuff */
result = platform_driver_register(&asuspf_driver);
if (result)
@@ -1394,8 +1368,27 @@
if (result)
goto fail_sysfs;
+ result = asus_led_init(&asuspf_device->dev);
+ if (result)
+ goto fail_led;
+
+ if (!acpi_video_backlight_support()) {
+ result = asus_backlight_init(&asuspf_device->dev);
+ if (result)
+ goto fail_backlight;
+ } else
+ pr_info("Brightness ignored, must be controlled by "
+ "ACPI video driver\n");
+
return 0;
+fail_backlight:
+ asus_led_exit();
+
+fail_led:
+ sysfs_remove_group(&asuspf_device->dev.kobj,
+ &asuspf_attribute_group);
+
fail_sysfs:
platform_device_del(asuspf_device);
@@ -1406,15 +1399,9 @@
platform_driver_unregister(&asuspf_driver);
fail_platform_driver:
- asus_led_exit();
-
-fail_led:
asus_input_exit();
fail_input:
- asus_backlight_exit();
-
-fail_backlight:
return result;
}
diff --git a/drivers/platform/x86/asus_acpi.c b/drivers/platform/x86/asus_acpi.c
index ba1f749..ddf5240 100644
--- a/drivers/platform/x86/asus_acpi.c
+++ b/drivers/platform/x86/asus_acpi.c
@@ -455,6 +455,8 @@
*/
static int asus_hotk_add(struct acpi_device *device);
static int asus_hotk_remove(struct acpi_device *device, int type);
+static void asus_hotk_notify(struct acpi_device *device, u32 event);
+
static const struct acpi_device_id asus_device_ids[] = {
{"ATK0100", 0},
{"", 0},
@@ -465,9 +467,11 @@
.name = "asus_acpi",
.class = ACPI_HOTK_CLASS,
.ids = asus_device_ids,
+ .flags = ACPI_DRIVER_ALL_NOTIFY_EVENTS,
.ops = {
.add = asus_hotk_add,
.remove = asus_hotk_remove,
+ .notify = asus_hotk_notify,
},
};
@@ -1101,12 +1105,20 @@
return 0;
}
-static void asus_hotk_notify(acpi_handle handle, u32 event, void *data)
+static void asus_hotk_notify(struct acpi_device *device, u32 event)
{
/* TODO Find a better way to handle events count. */
if (!hotk)
return;
+ /*
+ * The BIOS *should* be sending us device events, but apparently
+ * Asus uses system events instead, so just ignore any device
+ * events we get.
+ */
+ if (event > ACPI_MAX_SYS_NOTIFY)
+ return;
+
if ((event & ~((u32) BR_UP)) < 16)
hotk->brightness = (event & ~((u32) BR_UP));
else if ((event & ~((u32) BR_DOWN)) < 16)
@@ -1346,15 +1358,6 @@
if (result)
goto end;
- /*
- * We install the handler, it will receive the hotk in parameter, so, we
- * could add other data to the hotk struct
- */
- status = acpi_install_notify_handler(hotk->handle, ACPI_SYSTEM_NOTIFY,
- asus_hotk_notify, hotk);
- if (ACPI_FAILURE(status))
- printk(KERN_ERR " Error installing notify handler\n");
-
/* For laptops without GPLV: init the hotk->brightness value */
if ((!hotk->methods->brightness_get)
&& (!hotk->methods->brightness_status)
@@ -1389,16 +1392,9 @@
static int asus_hotk_remove(struct acpi_device *device, int type)
{
- acpi_status status = 0;
-
if (!device || !acpi_driver_data(device))
return -EINVAL;
- status = acpi_remove_notify_handler(hotk->handle, ACPI_SYSTEM_NOTIFY,
- asus_hotk_notify);
- if (ACPI_FAILURE(status))
- printk(KERN_ERR "Asus ACPI: Error removing notify handler\n");
-
asus_hotk_remove_fs(device);
kfree(hotk);
diff --git a/drivers/platform/x86/dell-wmi.c b/drivers/platform/x86/dell-wmi.c
index 2fab941..0f900cc 100644
--- a/drivers/platform/x86/dell-wmi.c
+++ b/drivers/platform/x86/dell-wmi.c
@@ -46,10 +46,53 @@
u16 keycode;
};
-enum { KE_KEY, KE_SW, KE_END };
+enum { KE_KEY, KE_SW, KE_IGNORE, KE_END };
+
+/*
+ * Certain keys are flagged as KE_IGNORE. All of these are either
+ * notifications (rather than requests for change) or are also sent
+ * via the keyboard controller so should not be sent again.
+ */
static struct key_entry dell_wmi_keymap[] = {
{KE_KEY, 0xe045, KEY_PROG1},
+ {KE_KEY, 0xe009, KEY_EJECTCD},
+
+ /* These also contain the brightness level at offset 6 */
+ {KE_KEY, 0xe006, KEY_BRIGHTNESSUP},
+ {KE_KEY, 0xe005, KEY_BRIGHTNESSDOWN},
+
+ /* Battery health status button */
+ {KE_KEY, 0xe007, KEY_BATTERY},
+
+ /* This is actually for all radios. Although physically a
+ * switch, the notification does not provide an indication of
+ * state and so it should be reported as a key */
+ {KE_KEY, 0xe008, KEY_WLAN},
+
+ /* The next device is at offset 6, the active devices are at
+ offset 8 and the attached devices at offset 10 */
+ {KE_KEY, 0xe00b, KEY_DISPLAYTOGGLE},
+
+ {KE_IGNORE, 0xe00c, KEY_KBDILLUMTOGGLE},
+
+ /* BIOS error detected */
+ {KE_IGNORE, 0xe00d, KEY_RESERVED},
+
+ /* Wifi Catcher */
+ {KE_KEY, 0xe011, KEY_PROG2},
+
+ /* Ambient light sensor toggle */
+ {KE_IGNORE, 0xe013, KEY_RESERVED},
+
+ {KE_IGNORE, 0xe020, KEY_MUTE},
+ {KE_IGNORE, 0xe02e, KEY_VOLUMEDOWN},
+ {KE_IGNORE, 0xe030, KEY_VOLUMEUP},
+ {KE_IGNORE, 0xe033, KEY_KBDILLUMUP},
+ {KE_IGNORE, 0xe034, KEY_KBDILLUMDOWN},
+ {KE_IGNORE, 0xe03a, KEY_CAPSLOCK},
+ {KE_IGNORE, 0xe045, KEY_NUMLOCK},
+ {KE_IGNORE, 0xe046, KEY_SCROLLLOCK},
{KE_END, 0}
};
@@ -122,15 +165,20 @@
if (obj && obj->type == ACPI_TYPE_BUFFER) {
int *buffer = (int *)obj->buffer.pointer;
- key = dell_wmi_get_entry_by_scancode(buffer[1]);
+ /*
+ * The upper bytes of the event may contain
+ * additional information, so mask them off for the
+ * scancode lookup
+ */
+ key = dell_wmi_get_entry_by_scancode(buffer[1] & 0xFFFF);
if (key) {
input_report_key(dell_wmi_input_dev, key->keycode, 1);
input_sync(dell_wmi_input_dev);
input_report_key(dell_wmi_input_dev, key->keycode, 0);
input_sync(dell_wmi_input_dev);
- } else
+ } else if (buffer[1] & 0xFFFF)
printk(KERN_INFO "dell-wmi: Unknown key %x pressed\n",
- buffer[1]);
+ buffer[1] & 0xFFFF);
}
}
diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c
index 8153b3e..ec560f1 100644
--- a/drivers/platform/x86/eeepc-laptop.c
+++ b/drivers/platform/x86/eeepc-laptop.c
@@ -16,6 +16,8 @@
* GNU General Public License for more details.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
@@ -31,6 +33,7 @@
#include <linux/input.h>
#include <linux/rfkill.h>
#include <linux/pci.h>
+#include <linux/pci_hotplug.h>
#define EEEPC_LAPTOP_VERSION "0.1"
@@ -40,11 +43,6 @@
#define EEEPC_HOTK_DEVICE_NAME "Hotkey"
#define EEEPC_HOTK_HID "ASUS010"
-#define EEEPC_LOG EEEPC_HOTK_FILE ": "
-#define EEEPC_ERR KERN_ERR EEEPC_LOG
-#define EEEPC_WARNING KERN_WARNING EEEPC_LOG
-#define EEEPC_NOTICE KERN_NOTICE EEEPC_LOG
-#define EEEPC_INFO KERN_INFO EEEPC_LOG
/*
* Definitions for Asus EeePC
@@ -62,7 +60,10 @@
DISABLE_ASL_GPS = 0x0020,
DISABLE_ASL_DISPLAYSWITCH = 0x0040,
DISABLE_ASL_MODEM = 0x0080,
- DISABLE_ASL_CARDREADER = 0x0100
+ DISABLE_ASL_CARDREADER = 0x0100,
+ DISABLE_ASL_3G = 0x0200,
+ DISABLE_ASL_WIMAX = 0x0400,
+ DISABLE_ASL_HWCF = 0x0800
};
enum {
@@ -87,7 +88,13 @@
CM_ASL_USBPORT3,
CM_ASL_MODEM,
CM_ASL_CARDREADER,
- CM_ASL_LID
+ CM_ASL_3G,
+ CM_ASL_WIMAX,
+ CM_ASL_HWCF,
+ CM_ASL_LID,
+ CM_ASL_TYPE,
+ CM_ASL_PANELPOWER, /*P901*/
+ CM_ASL_TPD
};
static const char *cm_getv[] = {
@@ -96,7 +103,8 @@
NULL, "PBLG", NULL, NULL,
"CFVG", NULL, NULL, NULL,
"USBG", NULL, NULL, "MODG",
- "CRDG", "LIDG"
+ "CRDG", "M3GG", "WIMG", "HWCF",
+ "LIDG", "TYPE", "PBPG", "TPDG"
};
static const char *cm_setv[] = {
@@ -105,7 +113,8 @@
"SDSP", "PBLS", "HDPS", NULL,
"CFVS", NULL, NULL, NULL,
"USBG", NULL, NULL, "MODS",
- "CRDS", NULL
+ "CRDS", "M3GS", "WIMS", NULL,
+ NULL, NULL, "PBPS", "TPDS"
};
#define EEEPC_EC "\\_SB.PCI0.SBRG.EC0."
@@ -130,8 +139,10 @@
u16 event_count[128]; /* count for each event */
struct input_dev *inputdev;
u16 *keycode_map;
- struct rfkill *eeepc_wlan_rfkill;
- struct rfkill *eeepc_bluetooth_rfkill;
+ struct rfkill *wlan_rfkill;
+ struct rfkill *bluetooth_rfkill;
+ struct rfkill *wwan3g_rfkill;
+ struct hotplug_slot *hotplug_slot;
};
/* The actual device the driver binds to */
@@ -181,6 +192,7 @@
static int eeepc_hotk_add(struct acpi_device *device);
static int eeepc_hotk_remove(struct acpi_device *device, int type);
static int eeepc_hotk_resume(struct acpi_device *device);
+static void eeepc_hotk_notify(struct acpi_device *device, u32 event);
static const struct acpi_device_id eeepc_device_ids[] = {
{EEEPC_HOTK_HID, 0},
@@ -192,13 +204,24 @@
.name = EEEPC_HOTK_NAME,
.class = EEEPC_HOTK_CLASS,
.ids = eeepc_device_ids,
+ .flags = ACPI_DRIVER_ALL_NOTIFY_EVENTS,
.ops = {
.add = eeepc_hotk_add,
.remove = eeepc_hotk_remove,
.resume = eeepc_hotk_resume,
+ .notify = eeepc_hotk_notify,
},
};
+/* PCI hotplug ops */
+static int eeepc_get_adapter_status(struct hotplug_slot *slot, u8 *value);
+
+static struct hotplug_slot_ops eeepc_hotplug_slot_ops = {
+ .owner = THIS_MODULE,
+ .get_adapter_status = eeepc_get_adapter_status,
+ .get_power_status = eeepc_get_adapter_status,
+};
+
/* The backlight device /sys/class/backlight */
static struct backlight_device *eeepc_backlight_device;
@@ -260,20 +283,20 @@
if (method == NULL)
return -ENODEV;
if (write_acpi_int(ehotk->handle, method, value, NULL))
- printk(EEEPC_WARNING "Error writing %s\n", method);
+ pr_warning("Error writing %s\n", method);
}
return 0;
}
static int get_acpi(int cm)
{
- int value = -1;
+ int value = -ENODEV;
if ((ehotk->cm_supported & (0x1 << cm))) {
const char *method = cm_getv[cm];
if (method == NULL)
return -ENODEV;
if (read_acpi_int(ehotk->handle, method, &value))
- printk(EEEPC_WARNING "Error reading %s\n", method);
+ pr_warning("Error reading %s\n", method);
}
return value;
}
@@ -318,6 +341,15 @@
.set_block = eeepc_rfkill_set,
};
+static void __init eeepc_enable_camera(void)
+{
+ /*
+ * If the following call to set_acpi() fails, it's because there's no
+ * camera so we can ignore the error.
+ */
+ set_acpi(CM_ASL_CAMERA, 1);
+}
+
/*
* Sys helpers
*/
@@ -336,13 +368,19 @@
rv = parse_arg(buf, count, &value);
if (rv > 0)
- set_acpi(cm, value);
+ value = set_acpi(cm, value);
+ if (value < 0)
+ return value;
return rv;
}
static ssize_t show_sys_acpi(int cm, char *buf)
{
- return sprintf(buf, "%d\n", get_acpi(cm));
+ int value = get_acpi(cm);
+
+ if (value < 0)
+ return value;
+ return sprintf(buf, "%d\n", value);
}
#define EEEPC_CREATE_DEVICE_ATTR(_name, _cm) \
@@ -369,13 +407,88 @@
EEEPC_CREATE_DEVICE_ATTR(camera, CM_ASL_CAMERA);
EEEPC_CREATE_DEVICE_ATTR(cardr, CM_ASL_CARDREADER);
EEEPC_CREATE_DEVICE_ATTR(disp, CM_ASL_DISPLAYSWITCH);
-EEEPC_CREATE_DEVICE_ATTR(cpufv, CM_ASL_CPUFV);
+
+struct eeepc_cpufv {
+ int num;
+ int cur;
+};
+
+static int get_cpufv(struct eeepc_cpufv *c)
+{
+ c->cur = get_acpi(CM_ASL_CPUFV);
+ c->num = (c->cur >> 8) & 0xff;
+ c->cur &= 0xff;
+ if (c->cur < 0 || c->num <= 0 || c->num > 12)
+ return -ENODEV;
+ return 0;
+}
+
+static ssize_t show_available_cpufv(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct eeepc_cpufv c;
+ int i;
+ ssize_t len = 0;
+
+ if (get_cpufv(&c))
+ return -ENODEV;
+ for (i = 0; i < c.num; i++)
+ len += sprintf(buf + len, "%d ", i);
+ len += sprintf(buf + len, "\n");
+ return len;
+}
+
+static ssize_t show_cpufv(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct eeepc_cpufv c;
+
+ if (get_cpufv(&c))
+ return -ENODEV;
+ return sprintf(buf, "%#x\n", (c.num << 8) | c.cur);
+}
+
+static ssize_t store_cpufv(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct eeepc_cpufv c;
+ int rv, value;
+
+ if (get_cpufv(&c))
+ return -ENODEV;
+ rv = parse_arg(buf, count, &value);
+ if (rv < 0)
+ return rv;
+ if (!rv || value < 0 || value >= c.num)
+ return -EINVAL;
+ set_acpi(CM_ASL_CPUFV, value);
+ return rv;
+}
+
+static struct device_attribute dev_attr_cpufv = {
+ .attr = {
+ .name = "cpufv",
+ .mode = 0644 },
+ .show = show_cpufv,
+ .store = store_cpufv
+};
+
+static struct device_attribute dev_attr_available_cpufv = {
+ .attr = {
+ .name = "available_cpufv",
+ .mode = 0444 },
+ .show = show_available_cpufv
+};
static struct attribute *platform_attributes[] = {
&dev_attr_camera.attr,
&dev_attr_cardr.attr,
&dev_attr_disp.attr,
&dev_attr_cpufv.attr,
+ &dev_attr_available_cpufv.attr,
NULL
};
@@ -441,6 +554,28 @@
return -EINVAL;
}
+static void cmsg_quirk(int cm, const char *name)
+{
+ int dummy;
+
+ /* Some BIOSes do not report cm although it is avaliable.
+ Check if cm_getv[cm] works and, if yes, assume cm should be set. */
+ if (!(ehotk->cm_supported & (1 << cm))
+ && !read_acpi_int(ehotk->handle, cm_getv[cm], &dummy)) {
+ pr_info("%s (%x) not reported by BIOS,"
+ " enabling anyway\n", name, 1 << cm);
+ ehotk->cm_supported |= 1 << cm;
+ }
+}
+
+static void cmsg_quirks(void)
+{
+ cmsg_quirk(CM_ASL_LID, "LID");
+ cmsg_quirk(CM_ASL_TYPE, "TYPE");
+ cmsg_quirk(CM_ASL_PANELPOWER, "PANELPOWER");
+ cmsg_quirk(CM_ASL_TPD, "TPD");
+}
+
static int eeepc_hotk_check(void)
{
const struct key_entry *key;
@@ -453,26 +588,24 @@
if (ehotk->device->status.present) {
if (write_acpi_int(ehotk->handle, "INIT", ehotk->init_flag,
&buffer)) {
- printk(EEEPC_ERR "Hotkey initialization failed\n");
+ pr_err("Hotkey initialization failed\n");
return -ENODEV;
} else {
- printk(EEEPC_NOTICE "Hotkey init flags 0x%x\n",
- ehotk->init_flag);
+ pr_notice("Hotkey init flags 0x%x\n", ehotk->init_flag);
}
/* get control methods supported */
if (read_acpi_int(ehotk->handle, "CMSG"
, &ehotk->cm_supported)) {
- printk(EEEPC_ERR
- "Get control methods supported failed\n");
+ pr_err("Get control methods supported failed\n");
return -ENODEV;
} else {
- printk(EEEPC_INFO
- "Get control methods supported: 0x%x\n",
- ehotk->cm_supported);
+ cmsg_quirks();
+ pr_info("Get control methods supported: 0x%x\n",
+ ehotk->cm_supported);
}
ehotk->inputdev = input_allocate_device();
if (!ehotk->inputdev) {
- printk(EEEPC_INFO "Unable to allocate input device\n");
+ pr_info("Unable to allocate input device\n");
return 0;
}
ehotk->inputdev->name = "Asus EeePC extra buttons";
@@ -491,12 +624,12 @@
}
result = input_register_device(ehotk->inputdev);
if (result) {
- printk(EEEPC_INFO "Unable to register input device\n");
+ pr_info("Unable to register input device\n");
input_free_device(ehotk->inputdev);
return 0;
}
} else {
- printk(EEEPC_ERR "Hotkey device not present, aborting\n");
+ pr_err("Hotkey device not present, aborting\n");
return -EINVAL;
}
return 0;
@@ -514,6 +647,19 @@
return -1;
}
+static int eeepc_get_adapter_status(struct hotplug_slot *hotplug_slot,
+ u8 *value)
+{
+ int val = get_acpi(CM_ASL_WLAN);
+
+ if (val == 1 || val == 0)
+ *value = val;
+ else
+ return -EINVAL;
+
+ return 0;
+}
+
static void eeepc_rfkill_hotplug(void)
{
struct pci_dev *dev;
@@ -521,7 +667,7 @@
bool blocked;
if (!bus) {
- printk(EEEPC_WARNING "Unable to find PCI bus 1?\n");
+ pr_warning("Unable to find PCI bus 1?\n");
return;
}
@@ -537,7 +683,7 @@
if (dev) {
pci_bus_assign_resources(bus);
if (pci_bus_add_device(dev))
- printk(EEEPC_ERR "Unable to hotplug wifi\n");
+ pr_err("Unable to hotplug wifi\n");
}
} else {
dev = pci_get_slot(bus, 0);
@@ -547,7 +693,7 @@
}
}
- rfkill_set_sw_state(ehotk->eeepc_wlan_rfkill, blocked);
+ rfkill_set_sw_state(ehotk->wlan_rfkill, blocked);
}
static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data)
@@ -558,7 +704,7 @@
eeepc_rfkill_hotplug();
}
-static void eeepc_hotk_notify(acpi_handle handle, u32 event, void *data)
+static void eeepc_hotk_notify(struct acpi_device *device, u32 event)
{
static struct key_entry *key;
u16 count;
@@ -566,6 +712,8 @@
if (!ehotk)
return;
+ if (event > ACPI_MAX_SYS_NOTIFY)
+ return;
if (event >= NOTIFY_BRN_MIN && event <= NOTIFY_BRN_MAX)
brn = notify_brn();
count = ehotk->event_count[event % 128]++;
@@ -618,8 +766,7 @@
eeepc_rfkill_notify,
NULL);
if (ACPI_FAILURE(status))
- printk(EEEPC_WARNING
- "Failed to register notify on %s\n", node);
+ pr_warning("Failed to register notify on %s\n", node);
} else
return -ENODEV;
@@ -638,20 +785,66 @@
ACPI_SYSTEM_NOTIFY,
eeepc_rfkill_notify);
if (ACPI_FAILURE(status))
- printk(EEEPC_ERR
- "Error removing rfkill notify handler %s\n",
+ pr_err("Error removing rfkill notify handler %s\n",
node);
}
}
+static void eeepc_cleanup_pci_hotplug(struct hotplug_slot *hotplug_slot)
+{
+ kfree(hotplug_slot->info);
+ kfree(hotplug_slot);
+}
+
+static int eeepc_setup_pci_hotplug(void)
+{
+ int ret = -ENOMEM;
+ struct pci_bus *bus = pci_find_bus(0, 1);
+
+ if (!bus) {
+ pr_err("Unable to find wifi PCI bus\n");
+ return -ENODEV;
+ }
+
+ ehotk->hotplug_slot = kzalloc(sizeof(struct hotplug_slot), GFP_KERNEL);
+ if (!ehotk->hotplug_slot)
+ goto error_slot;
+
+ ehotk->hotplug_slot->info = kzalloc(sizeof(struct hotplug_slot_info),
+ GFP_KERNEL);
+ if (!ehotk->hotplug_slot->info)
+ goto error_info;
+
+ ehotk->hotplug_slot->private = ehotk;
+ ehotk->hotplug_slot->release = &eeepc_cleanup_pci_hotplug;
+ ehotk->hotplug_slot->ops = &eeepc_hotplug_slot_ops;
+ eeepc_get_adapter_status(ehotk->hotplug_slot,
+ &ehotk->hotplug_slot->info->adapter_status);
+
+ ret = pci_hp_register(ehotk->hotplug_slot, bus, 0, "eeepc-wifi");
+ if (ret) {
+ pr_err("Unable to register hotplug slot - %d\n", ret);
+ goto error_register;
+ }
+
+ return 0;
+
+error_register:
+ kfree(ehotk->hotplug_slot->info);
+error_info:
+ kfree(ehotk->hotplug_slot);
+ ehotk->hotplug_slot = NULL;
+error_slot:
+ return ret;
+}
+
static int eeepc_hotk_add(struct acpi_device *device)
{
- acpi_status status = AE_OK;
int result;
if (!device)
return -EINVAL;
- printk(EEEPC_NOTICE EEEPC_HOTK_NAME "\n");
+ pr_notice(EEEPC_HOTK_NAME "\n");
ehotk = kzalloc(sizeof(struct eeepc_hotk), GFP_KERNEL);
if (!ehotk)
return -ENOMEM;
@@ -664,58 +857,9 @@
result = eeepc_hotk_check();
if (result)
goto ehotk_fail;
- status = acpi_install_notify_handler(ehotk->handle, ACPI_SYSTEM_NOTIFY,
- eeepc_hotk_notify, ehotk);
- if (ACPI_FAILURE(status))
- printk(EEEPC_ERR "Error installing notify handler\n");
-
- eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P6");
- eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P7");
-
- if (get_acpi(CM_ASL_WLAN) != -1) {
- ehotk->eeepc_wlan_rfkill = rfkill_alloc("eeepc-wlan",
- &device->dev,
- RFKILL_TYPE_WLAN,
- &eeepc_rfkill_ops,
- (void *)CM_ASL_WLAN);
-
- if (!ehotk->eeepc_wlan_rfkill)
- goto wlan_fail;
-
- rfkill_init_sw_state(ehotk->eeepc_wlan_rfkill,
- get_acpi(CM_ASL_WLAN) != 1);
- result = rfkill_register(ehotk->eeepc_wlan_rfkill);
- if (result)
- goto wlan_fail;
- }
-
- if (get_acpi(CM_ASL_BLUETOOTH) != -1) {
- ehotk->eeepc_bluetooth_rfkill =
- rfkill_alloc("eeepc-bluetooth",
- &device->dev,
- RFKILL_TYPE_BLUETOOTH,
- &eeepc_rfkill_ops,
- (void *)CM_ASL_BLUETOOTH);
-
- if (!ehotk->eeepc_bluetooth_rfkill)
- goto bluetooth_fail;
-
- rfkill_init_sw_state(ehotk->eeepc_bluetooth_rfkill,
- get_acpi(CM_ASL_BLUETOOTH) != 1);
- result = rfkill_register(ehotk->eeepc_bluetooth_rfkill);
- if (result)
- goto bluetooth_fail;
- }
return 0;
- bluetooth_fail:
- rfkill_destroy(ehotk->eeepc_bluetooth_rfkill);
- rfkill_unregister(ehotk->eeepc_wlan_rfkill);
- wlan_fail:
- rfkill_destroy(ehotk->eeepc_wlan_rfkill);
- eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P6");
- eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P7");
ehotk_fail:
kfree(ehotk);
ehotk = NULL;
@@ -725,17 +869,8 @@
static int eeepc_hotk_remove(struct acpi_device *device, int type)
{
- acpi_status status = 0;
-
if (!device || !acpi_driver_data(device))
return -EINVAL;
- status = acpi_remove_notify_handler(ehotk->handle, ACPI_SYSTEM_NOTIFY,
- eeepc_hotk_notify);
- if (ACPI_FAILURE(status))
- printk(EEEPC_ERR "Error removing notify handler\n");
-
- eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P6");
- eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P7");
kfree(ehotk);
return 0;
@@ -743,7 +878,7 @@
static int eeepc_hotk_resume(struct acpi_device *device)
{
- if (ehotk->eeepc_wlan_rfkill) {
+ if (ehotk->wlan_rfkill) {
bool wlan;
/* Workaround - it seems that _PTS disables the wireless
@@ -755,14 +890,13 @@
wlan = get_acpi(CM_ASL_WLAN);
set_acpi(CM_ASL_WLAN, wlan);
- rfkill_set_sw_state(ehotk->eeepc_wlan_rfkill,
- wlan != 1);
+ rfkill_set_sw_state(ehotk->wlan_rfkill, wlan != 1);
eeepc_rfkill_hotplug();
}
- if (ehotk->eeepc_bluetooth_rfkill)
- rfkill_set_sw_state(ehotk->eeepc_bluetooth_rfkill,
+ if (ehotk->bluetooth_rfkill)
+ rfkill_set_sw_state(ehotk->bluetooth_rfkill,
get_acpi(CM_ASL_BLUETOOTH) != 1);
return 0;
@@ -884,10 +1018,16 @@
static void eeepc_rfkill_exit(void)
{
- if (ehotk->eeepc_wlan_rfkill)
- rfkill_unregister(ehotk->eeepc_wlan_rfkill);
- if (ehotk->eeepc_bluetooth_rfkill)
- rfkill_unregister(ehotk->eeepc_bluetooth_rfkill);
+ eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P6");
+ eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P7");
+ if (ehotk->wlan_rfkill)
+ rfkill_unregister(ehotk->wlan_rfkill);
+ if (ehotk->bluetooth_rfkill)
+ rfkill_unregister(ehotk->bluetooth_rfkill);
+ if (ehotk->wwan3g_rfkill)
+ rfkill_unregister(ehotk->wwan3g_rfkill);
+ if (ehotk->hotplug_slot)
+ pci_hp_deregister(ehotk->hotplug_slot);
}
static void eeepc_input_exit(void)
@@ -922,6 +1062,75 @@
platform_driver_unregister(&platform_driver);
}
+static int eeepc_new_rfkill(struct rfkill **rfkill,
+ const char *name, struct device *dev,
+ enum rfkill_type type, int cm)
+{
+ int result;
+
+ result = get_acpi(cm);
+ if (result < 0)
+ return result;
+
+ *rfkill = rfkill_alloc(name, dev, type,
+ &eeepc_rfkill_ops, (void *)(unsigned long)cm);
+
+ if (!*rfkill)
+ return -EINVAL;
+
+ rfkill_init_sw_state(*rfkill, get_acpi(cm) != 1);
+ result = rfkill_register(*rfkill);
+ if (result) {
+ rfkill_destroy(*rfkill);
+ *rfkill = NULL;
+ return result;
+ }
+ return 0;
+}
+
+
+static int eeepc_rfkill_init(struct device *dev)
+{
+ int result = 0;
+
+ eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P6");
+ eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P7");
+
+ result = eeepc_new_rfkill(&ehotk->wlan_rfkill,
+ "eeepc-wlan", dev,
+ RFKILL_TYPE_WLAN, CM_ASL_WLAN);
+
+ if (result && result != -ENODEV)
+ goto exit;
+
+ result = eeepc_new_rfkill(&ehotk->bluetooth_rfkill,
+ "eeepc-bluetooth", dev,
+ RFKILL_TYPE_BLUETOOTH, CM_ASL_BLUETOOTH);
+
+ if (result && result != -ENODEV)
+ goto exit;
+
+ result = eeepc_new_rfkill(&ehotk->wwan3g_rfkill,
+ "eeepc-wwan3g", dev,
+ RFKILL_TYPE_WWAN, CM_ASL_3G);
+
+ if (result && result != -ENODEV)
+ goto exit;
+
+ result = eeepc_setup_pci_hotplug();
+ /*
+ * If we get -EBUSY then something else is handling the PCI hotplug -
+ * don't fail in this case
+ */
+ if (result == -EBUSY)
+ result = 0;
+
+exit:
+ if (result && result != -ENODEV)
+ eeepc_rfkill_exit();
+ return result;
+}
+
static int eeepc_backlight_init(struct device *dev)
{
struct backlight_device *bd;
@@ -929,8 +1138,7 @@
bd = backlight_device_register(EEEPC_HOTK_FILE, dev,
NULL, &eeepcbl_ops);
if (IS_ERR(bd)) {
- printk(EEEPC_ERR
- "Could not register eeepc backlight device\n");
+ pr_err("Could not register eeepc backlight device\n");
eeepc_backlight_device = NULL;
return PTR_ERR(bd);
}
@@ -949,8 +1157,7 @@
hwmon = hwmon_device_register(dev);
if (IS_ERR(hwmon)) {
- printk(EEEPC_ERR
- "Could not register eeepc hwmon device\n");
+ pr_err("Could not register eeepc hwmon device\n");
eeepc_hwmon_device = NULL;
return PTR_ERR(hwmon);
}
@@ -976,19 +1183,9 @@
acpi_bus_unregister_driver(&eeepc_hotk_driver);
return -ENODEV;
}
- dev = acpi_get_physical_device(ehotk->device->handle);
- if (!acpi_video_backlight_support()) {
- result = eeepc_backlight_init(dev);
- if (result)
- goto fail_backlight;
- } else
- printk(EEEPC_INFO "Backlight controlled by ACPI video "
- "driver\n");
+ eeepc_enable_camera();
- result = eeepc_hwmon_init(dev);
- if (result)
- goto fail_hwmon;
/* Register platform stuff */
result = platform_driver_register(&platform_driver);
if (result)
@@ -1005,7 +1202,33 @@
&platform_attribute_group);
if (result)
goto fail_sysfs;
+
+ dev = &platform_device->dev;
+
+ if (!acpi_video_backlight_support()) {
+ result = eeepc_backlight_init(dev);
+ if (result)
+ goto fail_backlight;
+ } else
+ pr_info("Backlight controlled by ACPI video "
+ "driver\n");
+
+ result = eeepc_hwmon_init(dev);
+ if (result)
+ goto fail_hwmon;
+
+ result = eeepc_rfkill_init(dev);
+ if (result)
+ goto fail_rfkill;
+
return 0;
+fail_rfkill:
+ eeepc_hwmon_exit();
+fail_hwmon:
+ eeepc_backlight_exit();
+fail_backlight:
+ sysfs_remove_group(&platform_device->dev.kobj,
+ &platform_attribute_group);
fail_sysfs:
platform_device_del(platform_device);
fail_platform_device2:
@@ -1013,12 +1236,7 @@
fail_platform_device1:
platform_driver_unregister(&platform_driver);
fail_platform_driver:
- eeepc_hwmon_exit();
-fail_hwmon:
- eeepc_backlight_exit();
-fail_backlight:
eeepc_input_exit();
- eeepc_rfkill_exit();
return result;
}
diff --git a/drivers/platform/x86/hp-wmi.c b/drivers/platform/x86/hp-wmi.c
index 16fffe44..4ac2311 100644
--- a/drivers/platform/x86/hp-wmi.c
+++ b/drivers/platform/x86/hp-wmi.c
@@ -47,7 +47,7 @@
#define HPWMI_DISPLAY_QUERY 0x1
#define HPWMI_HDDTEMP_QUERY 0x2
#define HPWMI_ALS_QUERY 0x3
-#define HPWMI_DOCK_QUERY 0x4
+#define HPWMI_HARDWARE_QUERY 0x4
#define HPWMI_WIRELESS_QUERY 0x5
#define HPWMI_HOTKEY_QUERY 0xc
@@ -75,10 +75,9 @@
u16 keycode;
};
-enum { KE_KEY, KE_SW, KE_END };
+enum { KE_KEY, KE_END };
static struct key_entry hp_wmi_keymap[] = {
- {KE_SW, 0x01, SW_DOCK},
{KE_KEY, 0x02, KEY_BRIGHTNESSUP},
{KE_KEY, 0x03, KEY_BRIGHTNESSDOWN},
{KE_KEY, 0x20e6, KEY_PROG1},
@@ -151,7 +150,22 @@
static int hp_wmi_dock_state(void)
{
- return hp_wmi_perform_query(HPWMI_DOCK_QUERY, 0, 0);
+ int ret = hp_wmi_perform_query(HPWMI_HARDWARE_QUERY, 0, 0);
+
+ if (ret < 0)
+ return ret;
+
+ return ret & 0x1;
+}
+
+static int hp_wmi_tablet_state(void)
+{
+ int ret = hp_wmi_perform_query(HPWMI_HARDWARE_QUERY, 0, 0);
+
+ if (ret < 0)
+ return ret;
+
+ return (ret & 0x4) ? 1 : 0;
}
static int hp_wmi_set_block(void *data, bool blocked)
@@ -232,6 +246,15 @@
return sprintf(buf, "%d\n", value);
}
+static ssize_t show_tablet(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ int value = hp_wmi_tablet_state();
+ if (value < 0)
+ return -EINVAL;
+ return sprintf(buf, "%d\n", value);
+}
+
static ssize_t set_als(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
@@ -244,6 +267,7 @@
static DEVICE_ATTR(hddtemp, S_IRUGO, show_hddtemp, NULL);
static DEVICE_ATTR(als, S_IRUGO | S_IWUSR, show_als, set_als);
static DEVICE_ATTR(dock, S_IRUGO, show_dock, NULL);
+static DEVICE_ATTR(tablet, S_IRUGO, show_tablet, NULL);
static struct key_entry *hp_wmi_get_entry_by_scancode(int code)
{
@@ -326,13 +350,13 @@
key->keycode, 0);
input_sync(hp_wmi_input_dev);
break;
- case KE_SW:
- input_report_switch(hp_wmi_input_dev,
- key->keycode,
- hp_wmi_dock_state());
- input_sync(hp_wmi_input_dev);
- break;
}
+ } else if (eventcode == 0x1) {
+ input_report_switch(hp_wmi_input_dev, SW_DOCK,
+ hp_wmi_dock_state());
+ input_report_switch(hp_wmi_input_dev, SW_TABLET_MODE,
+ hp_wmi_tablet_state());
+ input_sync(hp_wmi_input_dev);
} else if (eventcode == 0x5) {
if (wifi_rfkill)
rfkill_set_sw_state(wifi_rfkill,
@@ -369,18 +393,19 @@
set_bit(EV_KEY, hp_wmi_input_dev->evbit);
set_bit(key->keycode, hp_wmi_input_dev->keybit);
break;
- case KE_SW:
- set_bit(EV_SW, hp_wmi_input_dev->evbit);
- set_bit(key->keycode, hp_wmi_input_dev->swbit);
-
- /* Set initial dock state */
- input_report_switch(hp_wmi_input_dev, key->keycode,
- hp_wmi_dock_state());
- input_sync(hp_wmi_input_dev);
- break;
}
}
+ set_bit(EV_SW, hp_wmi_input_dev->evbit);
+ set_bit(SW_DOCK, hp_wmi_input_dev->swbit);
+ set_bit(SW_TABLET_MODE, hp_wmi_input_dev->swbit);
+
+ /* Set initial hardware state */
+ input_report_switch(hp_wmi_input_dev, SW_DOCK, hp_wmi_dock_state());
+ input_report_switch(hp_wmi_input_dev, SW_TABLET_MODE,
+ hp_wmi_tablet_state());
+ input_sync(hp_wmi_input_dev);
+
err = input_register_device(hp_wmi_input_dev);
if (err) {
@@ -397,6 +422,7 @@
device_remove_file(&device->dev, &dev_attr_hddtemp);
device_remove_file(&device->dev, &dev_attr_als);
device_remove_file(&device->dev, &dev_attr_dock);
+ device_remove_file(&device->dev, &dev_attr_tablet);
}
static int __init hp_wmi_bios_setup(struct platform_device *device)
@@ -416,6 +442,9 @@
err = device_create_file(&device->dev, &dev_attr_dock);
if (err)
goto add_sysfs_error;
+ err = device_create_file(&device->dev, &dev_attr_tablet);
+ if (err)
+ goto add_sysfs_error;
if (wireless & 0x1) {
wifi_rfkill = rfkill_alloc("hp-wifi", &device->dev,
@@ -485,23 +514,17 @@
static int hp_wmi_resume_handler(struct platform_device *device)
{
- struct key_entry *key;
-
/*
- * Docking state may have changed while suspended, so trigger
- * an input event for the current state. As this is a switch,
+ * Hardware state may have changed while suspended, so trigger
+ * input events for the current state. As this is a switch,
* the input layer will only actually pass it on if the state
* changed.
*/
- for (key = hp_wmi_keymap; key->type != KE_END; key++) {
- switch (key->type) {
- case KE_SW:
- input_report_switch(hp_wmi_input_dev, key->keycode,
- hp_wmi_dock_state());
- input_sync(hp_wmi_input_dev);
- break;
- }
- }
+
+ input_report_switch(hp_wmi_input_dev, SW_DOCK, hp_wmi_dock_state());
+ input_report_switch(hp_wmi_input_dev, SW_TABLET_MODE,
+ hp_wmi_tablet_state());
+ input_sync(hp_wmi_input_dev);
return 0;
}
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index 40d64c0..a463fd7 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -22,7 +22,7 @@
*/
#define TPACPI_VERSION "0.23"
-#define TPACPI_SYSFS_VERSION 0x020300
+#define TPACPI_SYSFS_VERSION 0x020400
/*
* Changelog:
@@ -257,6 +257,8 @@
u32 wan:1;
u32 uwb:1;
u32 fan_ctrl_status_undef:1;
+ u32 second_fan:1;
+ u32 beep_needs_two_args:1;
u32 input_device_registered:1;
u32 platform_drv_registered:1;
u32 platform_drv_attrs_registered:1;
@@ -277,8 +279,10 @@
char *bios_version_str; /* Something like 1ZET51WW (1.03z) */
char *ec_version_str; /* Something like 1ZHT51WW-1.04a */
- u16 bios_model; /* Big Endian, TP-1Y = 0x5931, 0 = unknown */
+ u16 bios_model; /* 1Y = 0x5931, 0 = unknown */
u16 ec_model;
+ u16 bios_release; /* 1ZETK1WW = 0x314b, 0 = unknown */
+ u16 ec_release;
char *model_str; /* ThinkPad T43 */
char *nummodel_str; /* 9384A9C for a 9384-A9C model */
@@ -355,6 +359,73 @@
} \
} while (0)
+/*
+ * Quirk handling helpers
+ *
+ * ThinkPad IDs and versions seen in the field so far
+ * are two-characters from the set [0-9A-Z], i.e. base 36.
+ *
+ * We use values well outside that range as specials.
+ */
+
+#define TPACPI_MATCH_ANY 0xffffU
+#define TPACPI_MATCH_UNKNOWN 0U
+
+/* TPID('1', 'Y') == 0x5931 */
+#define TPID(__c1, __c2) (((__c2) << 8) | (__c1))
+
+#define TPACPI_Q_IBM(__id1, __id2, __quirk) \
+ { .vendor = PCI_VENDOR_ID_IBM, \
+ .bios = TPID(__id1, __id2), \
+ .ec = TPACPI_MATCH_ANY, \
+ .quirks = (__quirk) }
+
+#define TPACPI_Q_LNV(__id1, __id2, __quirk) \
+ { .vendor = PCI_VENDOR_ID_LENOVO, \
+ .bios = TPID(__id1, __id2), \
+ .ec = TPACPI_MATCH_ANY, \
+ .quirks = (__quirk) }
+
+struct tpacpi_quirk {
+ unsigned int vendor;
+ u16 bios;
+ u16 ec;
+ unsigned long quirks;
+};
+
+/**
+ * tpacpi_check_quirks() - search BIOS/EC version on a list
+ * @qlist: array of &struct tpacpi_quirk
+ * @qlist_size: number of elements in @qlist
+ *
+ * Iterates over a quirks list until one is found that matches the
+ * ThinkPad's vendor, BIOS and EC model.
+ *
+ * Returns 0 if nothing matches, otherwise returns the quirks field of
+ * the matching &struct tpacpi_quirk entry.
+ *
+ * The match criteria is: vendor, ec and bios much match.
+ */
+static unsigned long __init tpacpi_check_quirks(
+ const struct tpacpi_quirk *qlist,
+ unsigned int qlist_size)
+{
+ while (qlist_size) {
+ if ((qlist->vendor == thinkpad_id.vendor ||
+ qlist->vendor == TPACPI_MATCH_ANY) &&
+ (qlist->bios == thinkpad_id.bios_model ||
+ qlist->bios == TPACPI_MATCH_ANY) &&
+ (qlist->ec == thinkpad_id.ec_model ||
+ qlist->ec == TPACPI_MATCH_ANY))
+ return qlist->quirks;
+
+ qlist_size--;
+ qlist++;
+ }
+ return 0;
+}
+
+
/****************************************************************************
****************************************************************************
*
@@ -2880,7 +2951,7 @@
/* update bright_acpimode... */
tpacpi_check_std_acpi_brightness_support();
- if (tp_features.bright_acpimode) {
+ if (tp_features.bright_acpimode && acpi_video_backlight_support()) {
printk(TPACPI_INFO
"This ThinkPad has standard ACPI backlight "
"brightness control, supported by the ACPI "
@@ -4773,7 +4844,7 @@
"LED", /* all others */
); /* R30, R31 */
-#define TPACPI_LED_NUMLEDS 8
+#define TPACPI_LED_NUMLEDS 16
static struct tpacpi_led_classdev *tpacpi_leds;
static enum led_status_t tpacpi_led_state_cache[TPACPI_LED_NUMLEDS];
static const char * const tpacpi_led_names[TPACPI_LED_NUMLEDS] = {
@@ -4786,15 +4857,20 @@
"tpacpi::dock_batt",
"tpacpi::unknown_led",
"tpacpi::standby",
+ "tpacpi::dock_status1",
+ "tpacpi::dock_status2",
+ "tpacpi::unknown_led2",
+ "tpacpi::unknown_led3",
+ "tpacpi::thinkvantage",
};
-#define TPACPI_SAFE_LEDS 0x0081U
+#define TPACPI_SAFE_LEDS 0x1081U
static inline bool tpacpi_is_led_restricted(const unsigned int led)
{
#ifdef CONFIG_THINKPAD_ACPI_UNSAFE_LEDS
return false;
#else
- return (TPACPI_SAFE_LEDS & (1 << led)) == 0;
+ return (1U & (TPACPI_SAFE_LEDS >> led)) == 0;
#endif
}
@@ -4956,6 +5032,10 @@
tpacpi_leds[led].led = led;
+ /* LEDs with no name don't get registered */
+ if (!tpacpi_led_names[led])
+ return 0;
+
tpacpi_leds[led].led_classdev.brightness_set = &led_sysfs_set;
tpacpi_leds[led].led_classdev.blink_set = &led_sysfs_blink_set;
if (led_supported == TPACPI_LED_570)
@@ -4974,10 +5054,59 @@
return rc;
}
+static const struct tpacpi_quirk led_useful_qtable[] __initconst = {
+ TPACPI_Q_IBM('1', 'E', 0x009f), /* A30 */
+ TPACPI_Q_IBM('1', 'N', 0x009f), /* A31 */
+ TPACPI_Q_IBM('1', 'G', 0x009f), /* A31 */
+
+ TPACPI_Q_IBM('1', 'I', 0x0097), /* T30 */
+ TPACPI_Q_IBM('1', 'R', 0x0097), /* T40, T41, T42, R50, R51 */
+ TPACPI_Q_IBM('7', '0', 0x0097), /* T43, R52 */
+ TPACPI_Q_IBM('1', 'Y', 0x0097), /* T43 */
+ TPACPI_Q_IBM('1', 'W', 0x0097), /* R50e */
+ TPACPI_Q_IBM('1', 'V', 0x0097), /* R51 */
+ TPACPI_Q_IBM('7', '8', 0x0097), /* R51e */
+ TPACPI_Q_IBM('7', '6', 0x0097), /* R52 */
+
+ TPACPI_Q_IBM('1', 'K', 0x00bf), /* X30 */
+ TPACPI_Q_IBM('1', 'Q', 0x00bf), /* X31, X32 */
+ TPACPI_Q_IBM('1', 'U', 0x00bf), /* X40 */
+ TPACPI_Q_IBM('7', '4', 0x00bf), /* X41 */
+ TPACPI_Q_IBM('7', '5', 0x00bf), /* X41t */
+
+ TPACPI_Q_IBM('7', '9', 0x1f97), /* T60 (1) */
+ TPACPI_Q_IBM('7', '7', 0x1f97), /* Z60* (1) */
+ TPACPI_Q_IBM('7', 'F', 0x1f97), /* Z61* (1) */
+ TPACPI_Q_IBM('7', 'B', 0x1fb7), /* X60 (1) */
+
+ /* (1) - may have excess leds enabled on MSB */
+
+ /* Defaults (order matters, keep last, don't reorder!) */
+ { /* Lenovo */
+ .vendor = PCI_VENDOR_ID_LENOVO,
+ .bios = TPACPI_MATCH_ANY, .ec = TPACPI_MATCH_ANY,
+ .quirks = 0x1fffU,
+ },
+ { /* IBM ThinkPads with no EC version string */
+ .vendor = PCI_VENDOR_ID_IBM,
+ .bios = TPACPI_MATCH_ANY, .ec = TPACPI_MATCH_UNKNOWN,
+ .quirks = 0x00ffU,
+ },
+ { /* IBM ThinkPads with EC version string */
+ .vendor = PCI_VENDOR_ID_IBM,
+ .bios = TPACPI_MATCH_ANY, .ec = TPACPI_MATCH_ANY,
+ .quirks = 0x00bfU,
+ },
+};
+
+#undef TPACPI_LEDQ_IBM
+#undef TPACPI_LEDQ_LNV
+
static int __init led_init(struct ibm_init_struct *iibm)
{
unsigned int i;
int rc;
+ unsigned long useful_leds;
vdbg_printk(TPACPI_DBG_INIT, "initializing LED subdriver\n");
@@ -4999,6 +5128,9 @@
vdbg_printk(TPACPI_DBG_INIT, "LED commands are %s, mode %d\n",
str_supported(led_supported), led_supported);
+ if (led_supported == TPACPI_LED_NONE)
+ return 1;
+
tpacpi_leds = kzalloc(sizeof(*tpacpi_leds) * TPACPI_LED_NUMLEDS,
GFP_KERNEL);
if (!tpacpi_leds) {
@@ -5006,8 +5138,12 @@
return -ENOMEM;
}
+ useful_leds = tpacpi_check_quirks(led_useful_qtable,
+ ARRAY_SIZE(led_useful_qtable));
+
for (i = 0; i < TPACPI_LED_NUMLEDS; i++) {
- if (!tpacpi_is_led_restricted(i)) {
+ if (!tpacpi_is_led_restricted(i) &&
+ test_bit(i, &useful_leds)) {
rc = tpacpi_init_led(i);
if (rc < 0) {
led_exit();
@@ -5017,12 +5153,11 @@
}
#ifdef CONFIG_THINKPAD_ACPI_UNSAFE_LEDS
- if (led_supported != TPACPI_LED_NONE)
- printk(TPACPI_NOTICE
- "warning: userspace override of important "
- "firmware LEDs is enabled\n");
+ printk(TPACPI_NOTICE
+ "warning: userspace override of important "
+ "firmware LEDs is enabled\n");
#endif
- return (led_supported != TPACPI_LED_NONE)? 0 : 1;
+ return 0;
}
#define str_led_status(s) \
@@ -5052,7 +5187,7 @@
}
len += sprintf(p + len, "commands:\t"
- "<led> on, <led> off, <led> blink (<led> is 0-7)\n");
+ "<led> on, <led> off, <led> blink (<led> is 0-15)\n");
return len;
}
@@ -5067,7 +5202,7 @@
return -ENODEV;
while ((cmd = next_cmd(&buf))) {
- if (sscanf(cmd, "%d", &led) != 1 || led < 0 || led > 7)
+ if (sscanf(cmd, "%d", &led) != 1 || led < 0 || led > 15)
return -EINVAL;
if (strstr(cmd, "off")) {
@@ -5101,8 +5236,17 @@
TPACPI_HANDLE(beep, ec, "BEEP"); /* all except R30, R31 */
+#define TPACPI_BEEP_Q1 0x0001
+
+static const struct tpacpi_quirk beep_quirk_table[] __initconst = {
+ TPACPI_Q_IBM('I', 'M', TPACPI_BEEP_Q1), /* 570 */
+ TPACPI_Q_IBM('I', 'U', TPACPI_BEEP_Q1), /* 570E - unverified */
+};
+
static int __init beep_init(struct ibm_init_struct *iibm)
{
+ unsigned long quirks;
+
vdbg_printk(TPACPI_DBG_INIT, "initializing beep subdriver\n");
TPACPI_ACPIHANDLE_INIT(beep);
@@ -5110,6 +5254,11 @@
vdbg_printk(TPACPI_DBG_INIT, "beep is %s\n",
str_supported(beep_handle != NULL));
+ quirks = tpacpi_check_quirks(beep_quirk_table,
+ ARRAY_SIZE(beep_quirk_table));
+
+ tp_features.beep_needs_two_args = !!(quirks & TPACPI_BEEP_Q1);
+
return (beep_handle)? 0 : 1;
}
@@ -5141,8 +5290,15 @@
/* beep_cmd set */
} else
return -EINVAL;
- if (!acpi_evalf(beep_handle, NULL, NULL, "vdd", beep_cmd, 0))
- return -EIO;
+ if (tp_features.beep_needs_two_args) {
+ if (!acpi_evalf(beep_handle, NULL, NULL, "vdd",
+ beep_cmd, 0))
+ return -EIO;
+ } else {
+ if (!acpi_evalf(beep_handle, NULL, NULL, "vd",
+ beep_cmd))
+ return -EIO;
+ }
}
return 0;
@@ -5569,6 +5725,10 @@
* Bit 3-0: backlight brightness level
*
* brightness_get_raw returns status data in the HBRV layout
+ *
+ * WARNING: The X61 has been verified to use HBRV for something else, so
+ * this should be used _only_ on IBM ThinkPads, and maybe with some careful
+ * testing on the very early *60 Lenovo models...
*/
enum {
@@ -5869,6 +6029,12 @@
brightness_mode);
}
+ /* Safety */
+ if (thinkpad_id.vendor != PCI_VENDOR_ID_IBM &&
+ (brightness_mode == TPACPI_BRGHT_MODE_ECNVRAM ||
+ brightness_mode == TPACPI_BRGHT_MODE_EC))
+ return -EINVAL;
+
if (tpacpi_brightness_get_raw(&b) < 0)
return 1;
@@ -6161,6 +6327,21 @@
* For firmware bugs, refer to:
* http://thinkwiki.org/wiki/Embedded_Controller_Firmware#Firmware_Issues
*
+ * ----
+ *
+ * ThinkPad EC register 0x31 bit 0 (only on select models)
+ *
+ * When bit 0 of EC register 0x31 is zero, the tachometer registers
+ * show the speed of the main fan. When bit 0 of EC register 0x31
+ * is one, the tachometer registers show the speed of the auxiliary
+ * fan.
+ *
+ * Fan control seems to affect both fans, regardless of the state
+ * of this bit.
+ *
+ * So far, only the firmware for the X60/X61 non-tablet versions
+ * seem to support this (firmware TP-7M).
+ *
* TPACPI_FAN_WR_ACPI_FANS:
* ThinkPad X31, X40, X41. Not available in the X60.
*
@@ -6187,6 +6368,8 @@
fan_status_offset = 0x2f, /* EC register 0x2f */
fan_rpm_offset = 0x84, /* EC register 0x84: LSB, 0x85 MSB (RPM)
* 0x84 must be read before 0x85 */
+ fan_select_offset = 0x31, /* EC register 0x31 (Firmware 7M)
+ bit 0 selects which fan is active */
TP_EC_FAN_FULLSPEED = 0x40, /* EC fan mode: full speed */
TP_EC_FAN_AUTO = 0x80, /* EC fan mode: auto fan control */
@@ -6249,30 +6432,18 @@
* We assume 0x07 really means auto mode while this quirk is active,
* as this is far more likely than the ThinkPad being in level 7,
* which is only used by the firmware during thermal emergencies.
+ *
+ * Enable for TP-1Y (T43), TP-78 (R51e), TP-76 (R52),
+ * TP-70 (T43, R52), which are known to be buggy.
*/
-static void fan_quirk1_detect(void)
+static void fan_quirk1_setup(void)
{
- /* In some ThinkPads, neither the EC nor the ACPI
- * DSDT initialize the HFSP register, and it ends up
- * being initially set to 0x07 when it *could* be
- * either 0x07 or 0x80.
- *
- * Enable for TP-1Y (T43), TP-78 (R51e),
- * TP-76 (R52), TP-70 (T43, R52), which are known
- * to be buggy. */
if (fan_control_initial_status == 0x07) {
- switch (thinkpad_id.ec_model) {
- case 0x5931: /* TP-1Y */
- case 0x3837: /* TP-78 */
- case 0x3637: /* TP-76 */
- case 0x3037: /* TP-70 */
- printk(TPACPI_NOTICE
- "fan_init: initial fan status is unknown, "
- "assuming it is in auto mode\n");
- tp_features.fan_ctrl_status_undef = 1;
- ;;
- }
+ printk(TPACPI_NOTICE
+ "fan_init: initial fan status is unknown, "
+ "assuming it is in auto mode\n");
+ tp_features.fan_ctrl_status_undef = 1;
}
}
@@ -6292,6 +6463,38 @@
}
}
+/* Select main fan on X60/X61, NOOP on others */
+static bool fan_select_fan1(void)
+{
+ if (tp_features.second_fan) {
+ u8 val;
+
+ if (ec_read(fan_select_offset, &val) < 0)
+ return false;
+ val &= 0xFEU;
+ if (ec_write(fan_select_offset, val) < 0)
+ return false;
+ }
+ return true;
+}
+
+/* Select secondary fan on X60/X61 */
+static bool fan_select_fan2(void)
+{
+ u8 val;
+
+ if (!tp_features.second_fan)
+ return false;
+
+ if (ec_read(fan_select_offset, &val) < 0)
+ return false;
+ val |= 0x01U;
+ if (ec_write(fan_select_offset, val) < 0)
+ return false;
+
+ return true;
+}
+
/*
* Call with fan_mutex held
*/
@@ -6369,6 +6572,8 @@
switch (fan_status_access_mode) {
case TPACPI_FAN_RD_TPEC:
/* all except 570, 600e/x, 770e, 770x */
+ if (unlikely(!fan_select_fan1()))
+ return -EIO;
if (unlikely(!acpi_ec_read(fan_rpm_offset, &lo) ||
!acpi_ec_read(fan_rpm_offset + 1, &hi)))
return -EIO;
@@ -6385,6 +6590,34 @@
return 0;
}
+static int fan2_get_speed(unsigned int *speed)
+{
+ u8 hi, lo;
+ bool rc;
+
+ switch (fan_status_access_mode) {
+ case TPACPI_FAN_RD_TPEC:
+ /* all except 570, 600e/x, 770e, 770x */
+ if (unlikely(!fan_select_fan2()))
+ return -EIO;
+ rc = !acpi_ec_read(fan_rpm_offset, &lo) ||
+ !acpi_ec_read(fan_rpm_offset + 1, &hi);
+ fan_select_fan1(); /* play it safe */
+ if (rc)
+ return -EIO;
+
+ if (likely(speed))
+ *speed = (hi << 8) | lo;
+
+ break;
+
+ default:
+ return -ENXIO;
+ }
+
+ return 0;
+}
+
static int fan_set_level(int level)
{
if (!fan_control_allowed)
@@ -6790,6 +7023,25 @@
__ATTR(fan1_input, S_IRUGO,
fan_fan1_input_show, NULL);
+/* sysfs fan fan2_input ------------------------------------------------ */
+static ssize_t fan_fan2_input_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int res;
+ unsigned int speed;
+
+ res = fan2_get_speed(&speed);
+ if (res < 0)
+ return res;
+
+ return snprintf(buf, PAGE_SIZE, "%u\n", speed);
+}
+
+static struct device_attribute dev_attr_fan_fan2_input =
+ __ATTR(fan2_input, S_IRUGO,
+ fan_fan2_input_show, NULL);
+
/* sysfs fan fan_watchdog (hwmon driver) ------------------------------- */
static ssize_t fan_fan_watchdog_show(struct device_driver *drv,
char *buf)
@@ -6823,6 +7075,7 @@
static struct attribute *fan_attributes[] = {
&dev_attr_fan_pwm1_enable.attr, &dev_attr_fan_pwm1.attr,
&dev_attr_fan_fan1_input.attr,
+ NULL, /* for fan2_input */
NULL
};
@@ -6830,9 +7083,36 @@
.attrs = fan_attributes,
};
+#define TPACPI_FAN_Q1 0x0001 /* Unitialized HFSP */
+#define TPACPI_FAN_2FAN 0x0002 /* EC 0x31 bit 0 selects fan2 */
+
+#define TPACPI_FAN_QI(__id1, __id2, __quirks) \
+ { .vendor = PCI_VENDOR_ID_IBM, \
+ .bios = TPACPI_MATCH_ANY, \
+ .ec = TPID(__id1, __id2), \
+ .quirks = __quirks }
+
+#define TPACPI_FAN_QL(__id1, __id2, __quirks) \
+ { .vendor = PCI_VENDOR_ID_LENOVO, \
+ .bios = TPACPI_MATCH_ANY, \
+ .ec = TPID(__id1, __id2), \
+ .quirks = __quirks }
+
+static const struct tpacpi_quirk fan_quirk_table[] __initconst = {
+ TPACPI_FAN_QI('1', 'Y', TPACPI_FAN_Q1),
+ TPACPI_FAN_QI('7', '8', TPACPI_FAN_Q1),
+ TPACPI_FAN_QI('7', '6', TPACPI_FAN_Q1),
+ TPACPI_FAN_QI('7', '0', TPACPI_FAN_Q1),
+ TPACPI_FAN_QL('7', 'M', TPACPI_FAN_2FAN),
+};
+
+#undef TPACPI_FAN_QL
+#undef TPACPI_FAN_QI
+
static int __init fan_init(struct ibm_init_struct *iibm)
{
int rc;
+ unsigned long quirks;
vdbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_FAN,
"initializing fan subdriver\n");
@@ -6843,12 +7123,16 @@
fan_control_commands = 0;
fan_watchdog_maxinterval = 0;
tp_features.fan_ctrl_status_undef = 0;
+ tp_features.second_fan = 0;
fan_control_desired_level = 7;
TPACPI_ACPIHANDLE_INIT(fans);
TPACPI_ACPIHANDLE_INIT(gfan);
TPACPI_ACPIHANDLE_INIT(sfan);
+ quirks = tpacpi_check_quirks(fan_quirk_table,
+ ARRAY_SIZE(fan_quirk_table));
+
if (gfan_handle) {
/* 570, 600e/x, 770e, 770x */
fan_status_access_mode = TPACPI_FAN_RD_ACPI_GFAN;
@@ -6858,7 +7142,13 @@
if (likely(acpi_ec_read(fan_status_offset,
&fan_control_initial_status))) {
fan_status_access_mode = TPACPI_FAN_RD_TPEC;
- fan_quirk1_detect();
+ if (quirks & TPACPI_FAN_Q1)
+ fan_quirk1_setup();
+ if (quirks & TPACPI_FAN_2FAN) {
+ tp_features.second_fan = 1;
+ dbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_FAN,
+ "secondary fan support enabled\n");
+ }
} else {
printk(TPACPI_ERR
"ThinkPad ACPI EC access misbehaving, "
@@ -6914,6 +7204,11 @@
if (fan_status_access_mode != TPACPI_FAN_NONE ||
fan_control_access_mode != TPACPI_FAN_WR_NONE) {
+ if (tp_features.second_fan) {
+ /* attach second fan tachometer */
+ fan_attributes[ARRAY_SIZE(fan_attributes)-2] =
+ &dev_attr_fan_fan2_input.attr;
+ }
rc = sysfs_create_group(&tpacpi_sensors_pdev->dev.kobj,
&fan_attr_group);
if (rc < 0)
@@ -7385,6 +7680,24 @@
/* Probing */
+static bool __pure __init tpacpi_is_fw_digit(const char c)
+{
+ return (c >= '0' && c <= '9') || (c >= 'A' && c <= 'Z');
+}
+
+/* Most models: xxyTkkWW (#.##c); Ancient 570/600 and -SL lacks (#.##c) */
+static bool __pure __init tpacpi_is_valid_fw_id(const char* const s,
+ const char t)
+{
+ return s && strlen(s) >= 8 &&
+ tpacpi_is_fw_digit(s[0]) &&
+ tpacpi_is_fw_digit(s[1]) &&
+ s[2] == t && s[3] == 'T' &&
+ tpacpi_is_fw_digit(s[4]) &&
+ tpacpi_is_fw_digit(s[5]) &&
+ s[6] == 'W' && s[7] == 'W';
+}
+
/* returns 0 - probe ok, or < 0 - probe error.
* Probe ok doesn't mean thinkpad found.
* On error, kfree() cleanup on tp->* is not performed, caller must do it */
@@ -7411,10 +7724,15 @@
tp->bios_version_str = kstrdup(s, GFP_KERNEL);
if (s && !tp->bios_version_str)
return -ENOMEM;
- if (!tp->bios_version_str)
+
+ /* Really ancient ThinkPad 240X will fail this, which is fine */
+ if (!tpacpi_is_valid_fw_id(tp->bios_version_str, 'E'))
return 0;
+
tp->bios_model = tp->bios_version_str[0]
| (tp->bios_version_str[1] << 8);
+ tp->bios_release = (tp->bios_version_str[4] << 8)
+ | tp->bios_version_str[5];
/*
* ThinkPad T23 or newer, A31 or newer, R50e or newer,
@@ -7433,8 +7751,21 @@
tp->ec_version_str = kstrdup(ec_fw_string, GFP_KERNEL);
if (!tp->ec_version_str)
return -ENOMEM;
- tp->ec_model = ec_fw_string[0]
- | (ec_fw_string[1] << 8);
+
+ if (tpacpi_is_valid_fw_id(ec_fw_string, 'H')) {
+ tp->ec_model = ec_fw_string[0]
+ | (ec_fw_string[1] << 8);
+ tp->ec_release = (ec_fw_string[4] << 8)
+ | ec_fw_string[5];
+ } else {
+ printk(TPACPI_NOTICE
+ "ThinkPad firmware release %s "
+ "doesn't match the known patterns\n",
+ ec_fw_string);
+ printk(TPACPI_NOTICE
+ "please report this to %s\n",
+ TPACPI_MAIL);
+ }
break;
}
}
diff --git a/drivers/pnp/pnpacpi/rsparser.c b/drivers/pnp/pnpacpi/rsparser.c
index 7f207f3..ef3a2cd3a 100644
--- a/drivers/pnp/pnpacpi/rsparser.c
+++ b/drivers/pnp/pnpacpi/rsparser.c
@@ -287,6 +287,25 @@
ACPI_DECODE_16);
}
+static void pnpacpi_parse_allocated_ext_address_space(struct pnp_dev *dev,
+ struct acpi_resource *res)
+{
+ struct acpi_resource_extended_address64 *p = &res->data.ext_address64;
+
+ if (p->producer_consumer == ACPI_PRODUCER)
+ return;
+
+ if (p->resource_type == ACPI_MEMORY_RANGE)
+ pnpacpi_parse_allocated_memresource(dev,
+ p->minimum, p->address_length,
+ p->info.mem.write_protect);
+ else if (p->resource_type == ACPI_IO_RANGE)
+ pnpacpi_parse_allocated_ioresource(dev,
+ p->minimum, p->address_length,
+ p->granularity == 0xfff ? ACPI_DECODE_10 :
+ ACPI_DECODE_16);
+}
+
static acpi_status pnpacpi_allocated_resource(struct acpi_resource *res,
void *data)
{
@@ -400,8 +419,7 @@
break;
case ACPI_RESOURCE_TYPE_EXTENDED_ADDRESS64:
- if (res->data.ext_address64.producer_consumer == ACPI_PRODUCER)
- return AE_OK;
+ pnpacpi_parse_allocated_ext_address_space(dev, res);
break;
case ACPI_RESOURCE_TYPE_EXTENDED_IRQ:
@@ -630,6 +648,28 @@
IORESOURCE_IO_FIXED);
}
+static __init void pnpacpi_parse_ext_address_option(struct pnp_dev *dev,
+ unsigned int option_flags,
+ struct acpi_resource *r)
+{
+ struct acpi_resource_extended_address64 *p = &r->data.ext_address64;
+ unsigned char flags = 0;
+
+ if (p->address_length == 0)
+ return;
+
+ if (p->resource_type == ACPI_MEMORY_RANGE) {
+ if (p->info.mem.write_protect == ACPI_READ_WRITE_MEMORY)
+ flags = IORESOURCE_MEM_WRITEABLE;
+ pnp_register_mem_resource(dev, option_flags, p->minimum,
+ p->minimum, 0, p->address_length,
+ flags);
+ } else if (p->resource_type == ACPI_IO_RANGE)
+ pnp_register_port_resource(dev, option_flags, p->minimum,
+ p->minimum, 0, p->address_length,
+ IORESOURCE_IO_FIXED);
+}
+
struct acpipnp_parse_option_s {
struct pnp_dev *dev;
unsigned int option_flags;
@@ -711,6 +751,7 @@
break;
case ACPI_RESOURCE_TYPE_EXTENDED_ADDRESS64:
+ pnpacpi_parse_ext_address_option(dev, option_flags, res);
break;
case ACPI_RESOURCE_TYPE_EXTENDED_IRQ:
@@ -765,6 +806,7 @@
case ACPI_RESOURCE_TYPE_ADDRESS16:
case ACPI_RESOURCE_TYPE_ADDRESS32:
case ACPI_RESOURCE_TYPE_ADDRESS64:
+ case ACPI_RESOURCE_TYPE_EXTENDED_ADDRESS64:
case ACPI_RESOURCE_TYPE_EXTENDED_IRQ:
return 1;
}
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index 33da112..7eda348 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -82,6 +82,14 @@
Say Y here to enable support for batteries charger integrated into
DA9030 PMIC.
+config BATTERY_MAX17040
+ tristate "Maxim MAX17040 Fuel Gauge"
+ depends on I2C
+ help
+ MAX17040 is fuel-gauge systems for lithium-ion (Li+) batteries
+ in handheld and portable equipment. The MAX17040 is configured
+ to operate with a single lithium cell
+
config CHARGER_PCF50633
tristate "NXP PCF50633 MBC"
depends on MFD_PCF50633
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index 2fcf41d..daf3179 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -25,4 +25,5 @@
obj-$(CONFIG_BATTERY_WM97XX) += wm97xx_battery.o
obj-$(CONFIG_BATTERY_BQ27x00) += bq27x00_battery.o
obj-$(CONFIG_BATTERY_DA9030) += da9030_battery.o
-obj-$(CONFIG_CHARGER_PCF50633) += pcf50633-charger.o
\ No newline at end of file
+obj-$(CONFIG_BATTERY_MAX17040) += max17040_battery.o
+obj-$(CONFIG_CHARGER_PCF50633) += pcf50633-charger.o
diff --git a/drivers/power/da9030_battery.c b/drivers/power/da9030_battery.c
index 1662bb0..336419813 100644
--- a/drivers/power/da9030_battery.c
+++ b/drivers/power/da9030_battery.c
@@ -22,8 +22,6 @@
#include <linux/debugfs.h>
#include <linux/seq_file.h>
-#define DA9030_STATUS_CHDET (1 << 3)
-
#define DA9030_FAULT_LOG 0x0a
#define DA9030_FAULT_LOG_OVER_TEMP (1 << 7)
#define DA9030_FAULT_LOG_VBAT_OVER (1 << 4)
@@ -244,6 +242,8 @@
}
da903x_write(charger->master, DA9030_CHARGE_CONTROL, val);
+
+ power_supply_changed(&charger->psy);
}
static void da9030_charger_check_state(struct da9030_charger *charger)
@@ -258,6 +258,12 @@
da9030_set_charge(charger, 1);
}
} else {
+ /* Charger has been pulled out */
+ if (!charger->chdet) {
+ da9030_set_charge(charger, 0);
+ return;
+ }
+
if (charger->adc.vbat_res >=
charger->thresholds.vbat_charge_stop) {
da9030_set_charge(charger, 0);
@@ -395,13 +401,11 @@
{
struct da9030_charger *charger =
container_of(nb, struct da9030_charger, nb);
- int status;
switch (event) {
case DA9030_EVENT_CHDET:
- status = da903x_query_status(charger->master,
- DA9030_STATUS_CHDET);
- da9030_set_charge(charger, status);
+ cancel_delayed_work_sync(&charger->work);
+ schedule_work(&charger->work.work);
break;
case DA9030_EVENT_VBATMON:
da9030_battery_vbat_event(charger);
@@ -565,7 +569,8 @@
da903x_unregister_notifier(charger->master, &charger->nb,
DA9030_EVENT_CHDET | DA9030_EVENT_VBATMON |
DA9030_EVENT_CHIOVER | DA9030_EVENT_TBAT);
- cancel_delayed_work(&charger->work);
+ cancel_delayed_work_sync(&charger->work);
+ da9030_set_charge(charger, 0);
power_supply_unregister(&charger->psy);
kfree(charger);
diff --git a/drivers/power/ds2760_battery.c b/drivers/power/ds2760_battery.c
index a52d4a1..520b5c4 100644
--- a/drivers/power/ds2760_battery.c
+++ b/drivers/power/ds2760_battery.c
@@ -62,6 +62,10 @@
module_param(cache_time, uint, 0644);
MODULE_PARM_DESC(cache_time, "cache time in milliseconds");
+static unsigned int pmod_enabled;
+module_param(pmod_enabled, bool, 0644);
+MODULE_PARM_DESC(pmod_enabled, "PMOD enable bit");
+
/* Some batteries have their rated capacity stored a N * 10 mAh, while
* others use an index into this table. */
static int rated_capacities[] = {
@@ -259,6 +263,17 @@
power_supply_changed(&di->bat);
}
+static void ds2760_battery_write_status(struct ds2760_device_info *di,
+ char status)
+{
+ if (status == di->raw[DS2760_STATUS_REG])
+ return;
+
+ w1_ds2760_write(di->w1_dev, &status, DS2760_STATUS_WRITE_REG, 1);
+ w1_ds2760_store_eeprom(di->w1_dev, DS2760_EEPROM_BLOCK1);
+ w1_ds2760_recall_eeprom(di->w1_dev, DS2760_EEPROM_BLOCK1);
+}
+
static void ds2760_battery_work(struct work_struct *work)
{
struct ds2760_device_info *di = container_of(work,
@@ -342,9 +357,9 @@
static int ds2760_battery_probe(struct platform_device *pdev)
{
+ char status;
int retval = 0;
struct ds2760_device_info *di;
- struct ds2760_platform_data *pdata;
di = kzalloc(sizeof(*di), GFP_KERNEL);
if (!di) {
@@ -354,14 +369,13 @@
platform_set_drvdata(pdev, di);
- pdata = pdev->dev.platform_data;
- di->dev = &pdev->dev;
- di->w1_dev = pdev->dev.parent;
- di->bat.name = dev_name(&pdev->dev);
- di->bat.type = POWER_SUPPLY_TYPE_BATTERY;
- di->bat.properties = ds2760_battery_props;
- di->bat.num_properties = ARRAY_SIZE(ds2760_battery_props);
- di->bat.get_property = ds2760_battery_get_property;
+ di->dev = &pdev->dev;
+ di->w1_dev = pdev->dev.parent;
+ di->bat.name = dev_name(&pdev->dev);
+ di->bat.type = POWER_SUPPLY_TYPE_BATTERY;
+ di->bat.properties = ds2760_battery_props;
+ di->bat.num_properties = ARRAY_SIZE(ds2760_battery_props);
+ di->bat.get_property = ds2760_battery_get_property;
di->bat.external_power_changed =
ds2760_battery_external_power_changed;
@@ -373,6 +387,16 @@
goto batt_failed;
}
+ /* enable sleep mode feature */
+ ds2760_battery_read_status(di);
+ status = di->raw[DS2760_STATUS_REG];
+ if (pmod_enabled)
+ status |= DS2760_STATUS_PMOD;
+ else
+ status &= ~DS2760_STATUS_PMOD;
+
+ ds2760_battery_write_status(di, status);
+
INIT_DELAYED_WORK(&di->monitor_work, ds2760_battery_work);
di->monitor_wqueue = create_singlethread_workqueue(dev_name(&pdev->dev));
if (!di->monitor_wqueue) {
diff --git a/drivers/power/max17040_battery.c b/drivers/power/max17040_battery.c
new file mode 100644
index 0000000..87b98bf2
--- /dev/null
+++ b/drivers/power/max17040_battery.c
@@ -0,0 +1,309 @@
+/*
+ * max17040_battery.c
+ * fuel-gauge systems for lithium-ion (Li+) batteries
+ *
+ * Copyright (C) 2009 Samsung Electronics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mutex.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/power_supply.h>
+#include <linux/max17040_battery.h>
+
+#define MAX17040_VCELL_MSB 0x02
+#define MAX17040_VCELL_LSB 0x03
+#define MAX17040_SOC_MSB 0x04
+#define MAX17040_SOC_LSB 0x05
+#define MAX17040_MODE_MSB 0x06
+#define MAX17040_MODE_LSB 0x07
+#define MAX17040_VER_MSB 0x08
+#define MAX17040_VER_LSB 0x09
+#define MAX17040_RCOMP_MSB 0x0C
+#define MAX17040_RCOMP_LSB 0x0D
+#define MAX17040_CMD_MSB 0xFE
+#define MAX17040_CMD_LSB 0xFF
+
+#define MAX17040_DELAY 1000
+#define MAX17040_BATTERY_FULL 95
+
+struct max17040_chip {
+ struct i2c_client *client;
+ struct delayed_work work;
+ struct power_supply battery;
+ struct max17040_platform_data *pdata;
+
+ /* State Of Connect */
+ int online;
+ /* battery voltage */
+ int vcell;
+ /* battery capacity */
+ int soc;
+ /* State Of Charge */
+ int status;
+};
+
+static int max17040_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct max17040_chip *chip = container_of(psy,
+ struct max17040_chip, battery);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ val->intval = chip->status;
+ break;
+ case POWER_SUPPLY_PROP_ONLINE:
+ val->intval = chip->online;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ val->intval = chip->vcell;
+ break;
+ case POWER_SUPPLY_PROP_CAPACITY:
+ val->intval = chip->soc;
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int max17040_write_reg(struct i2c_client *client, int reg, u8 value)
+{
+ int ret;
+
+ ret = i2c_smbus_write_byte_data(client, reg, value);
+
+ if (ret < 0)
+ dev_err(&client->dev, "%s: err %d\n", __func__, ret);
+
+ return ret;
+}
+
+static int max17040_read_reg(struct i2c_client *client, int reg)
+{
+ int ret;
+
+ ret = i2c_smbus_read_byte_data(client, reg);
+
+ if (ret < 0)
+ dev_err(&client->dev, "%s: err %d\n", __func__, ret);
+
+ return ret;
+}
+
+static void max17040_reset(struct i2c_client *client)
+{
+ max17040_write_reg(client, MAX17040_CMD_MSB, 0x54);
+ max17040_write_reg(client, MAX17040_CMD_LSB, 0x00);
+}
+
+static void max17040_get_vcell(struct i2c_client *client)
+{
+ struct max17040_chip *chip = i2c_get_clientdata(client);
+ u8 msb;
+ u8 lsb;
+
+ msb = max17040_read_reg(client, MAX17040_VCELL_MSB);
+ lsb = max17040_read_reg(client, MAX17040_VCELL_LSB);
+
+ chip->vcell = (msb << 4) + (lsb >> 4);
+}
+
+static void max17040_get_soc(struct i2c_client *client)
+{
+ struct max17040_chip *chip = i2c_get_clientdata(client);
+ u8 msb;
+ u8 lsb;
+
+ msb = max17040_read_reg(client, MAX17040_SOC_MSB);
+ lsb = max17040_read_reg(client, MAX17040_SOC_LSB);
+
+ chip->soc = msb;
+}
+
+static void max17040_get_version(struct i2c_client *client)
+{
+ u8 msb;
+ u8 lsb;
+
+ msb = max17040_read_reg(client, MAX17040_VER_MSB);
+ lsb = max17040_read_reg(client, MAX17040_VER_LSB);
+
+ dev_info(&client->dev, "MAX17040 Fuel-Gauge Ver %d%d\n", msb, lsb);
+}
+
+static void max17040_get_online(struct i2c_client *client)
+{
+ struct max17040_chip *chip = i2c_get_clientdata(client);
+
+ if (chip->pdata->battery_online)
+ chip->online = chip->pdata->battery_online();
+ else
+ chip->online = 1;
+}
+
+static void max17040_get_status(struct i2c_client *client)
+{
+ struct max17040_chip *chip = i2c_get_clientdata(client);
+
+ if (!chip->pdata->charger_online || !chip->pdata->charger_enable) {
+ chip->status = POWER_SUPPLY_STATUS_UNKNOWN;
+ return;
+ }
+
+ if (chip->pdata->charger_online()) {
+ if (chip->pdata->charger_enable())
+ chip->status = POWER_SUPPLY_STATUS_CHARGING;
+ else
+ chip->status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ } else {
+ chip->status = POWER_SUPPLY_STATUS_DISCHARGING;
+ }
+
+ if (chip->soc > MAX17040_BATTERY_FULL)
+ chip->status = POWER_SUPPLY_STATUS_FULL;
+}
+
+static void max17040_work(struct work_struct *work)
+{
+ struct max17040_chip *chip;
+
+ chip = container_of(work, struct max17040_chip, work.work);
+
+ max17040_get_vcell(chip->client);
+ max17040_get_soc(chip->client);
+ max17040_get_online(chip->client);
+ max17040_get_status(chip->client);
+
+ schedule_delayed_work(&chip->work, MAX17040_DELAY);
+}
+
+static enum power_supply_property max17040_battery_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CAPACITY,
+};
+
+static int __devinit max17040_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
+ struct max17040_chip *chip;
+ int ret;
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE))
+ return -EIO;
+
+ chip = kzalloc(sizeof(*chip), GFP_KERNEL);
+ if (!chip)
+ return -ENOMEM;
+
+ chip->client = client;
+ chip->pdata = client->dev.platform_data;
+
+ i2c_set_clientdata(client, chip);
+
+ chip->battery.name = "battery";
+ chip->battery.type = POWER_SUPPLY_TYPE_BATTERY;
+ chip->battery.get_property = max17040_get_property;
+ chip->battery.properties = max17040_battery_props;
+ chip->battery.num_properties = ARRAY_SIZE(max17040_battery_props);
+
+ ret = power_supply_register(&client->dev, &chip->battery);
+ if (ret) {
+ dev_err(&client->dev, "failed: power supply register\n");
+ i2c_set_clientdata(client, NULL);
+ kfree(chip);
+ return ret;
+ }
+
+ max17040_reset(client);
+ max17040_get_version(client);
+
+ INIT_DELAYED_WORK_DEFERRABLE(&chip->work, max17040_work);
+ schedule_delayed_work(&chip->work, MAX17040_DELAY);
+
+ return 0;
+}
+
+static int __devexit max17040_remove(struct i2c_client *client)
+{
+ struct max17040_chip *chip = i2c_get_clientdata(client);
+
+ power_supply_unregister(&chip->battery);
+ cancel_delayed_work(&chip->work);
+ i2c_set_clientdata(client, NULL);
+ kfree(chip);
+ return 0;
+}
+
+#ifdef CONFIG_PM
+
+static int max17040_suspend(struct i2c_client *client,
+ pm_message_t state)
+{
+ struct max17040_chip *chip = i2c_get_clientdata(client);
+
+ cancel_delayed_work(&chip->work);
+ return 0;
+}
+
+static int max17040_resume(struct i2c_client *client)
+{
+ struct max17040_chip *chip = i2c_get_clientdata(client);
+
+ schedule_delayed_work(&chip->work, MAX17040_DELAY);
+ return 0;
+}
+
+#else
+
+#define max17040_suspend NULL
+#define max17040_resume NULL
+
+#endif /* CONFIG_PM */
+
+static const struct i2c_device_id max17040_id[] = {
+ { "max17040", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, max17040_id);
+
+static struct i2c_driver max17040_i2c_driver = {
+ .driver = {
+ .name = "max17040",
+ },
+ .probe = max17040_probe,
+ .remove = __devexit_p(max17040_remove),
+ .suspend = max17040_suspend,
+ .resume = max17040_resume,
+ .id_table = max17040_id,
+};
+
+static int __init max17040_init(void)
+{
+ return i2c_add_driver(&max17040_i2c_driver);
+}
+module_init(max17040_init);
+
+static void __exit max17040_exit(void)
+{
+ i2c_del_driver(&max17040_i2c_driver);
+}
+module_exit(max17040_exit);
+
+MODULE_AUTHOR("Minkyu Kang <mk7.kang@samsung.com>");
+MODULE_DESCRIPTION("MAX17040 Fuel Gauge");
+MODULE_LICENSE("GPL");
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 6a19ed9..9c23122 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -258,10 +258,21 @@
or async on the kernel's command line.
config SCSI_WAIT_SCAN
- tristate
+ tristate # No prompt here, this is an invisible symbol.
default m
depends on SCSI
depends on MODULES
+# scsi_wait_scan is a loadable module which waits until all the async scans are
+# complete. The idea is to use it in initrd/ initramfs scripts. You modprobe
+# it after all the modprobes of the root SCSI drivers and it will wait until
+# they have all finished scanning their buses before allowing the boot to
+# proceed. (This method is not applicable if targets boot independently in
+# parallel with the initiator, or with transports with non-deterministic target
+# discovery schemes, or if a transport driver does not support scsi_wait_scan.)
+#
+# This symbol is not exposed as a prompt because little is to be gained by
+# disabling it, whereas people who accidentally switch it off may wonder why
+# their mkinitrd gets into trouble.
menu "SCSI Transports"
depends on SCSI
diff --git a/drivers/scsi/bnx2i/Kconfig b/drivers/scsi/bnx2i/Kconfig
index b62b482..1e9f714 100644
--- a/drivers/scsi/bnx2i/Kconfig
+++ b/drivers/scsi/bnx2i/Kconfig
@@ -1,6 +1,8 @@
config SCSI_BNX2_ISCSI
tristate "Broadcom NetXtreme II iSCSI support"
select SCSI_ISCSI_ATTRS
+ select NETDEVICES
+ select NETDEV_1000
select CNIC
depends on PCI
---help---
diff --git a/drivers/scsi/cxgb3i/cxgb3i_ddp.c b/drivers/scsi/cxgb3i/cxgb3i_ddp.c
index 99c9125..344fd53 100644
--- a/drivers/scsi/cxgb3i/cxgb3i_ddp.c
+++ b/drivers/scsi/cxgb3i/cxgb3i_ddp.c
@@ -206,6 +206,31 @@
return DDP_PGIDX_MAX;
}
+/**
+ * cxgb3i_ddp_adjust_page_table - adjust page table with PAGE_SIZE
+ * return the ddp page index, if no match is found return DDP_PGIDX_MAX.
+ */
+int cxgb3i_ddp_adjust_page_table(void)
+{
+ int i;
+ unsigned int base_order, order;
+
+ if (PAGE_SIZE < (1UL << ddp_page_shift[0])) {
+ ddp_log_info("PAGE_SIZE 0x%lx too small, min. 0x%lx.\n",
+ PAGE_SIZE, 1UL << ddp_page_shift[0]);
+ return -EINVAL;
+ }
+
+ base_order = get_order(1UL << ddp_page_shift[0]);
+ order = get_order(1 << PAGE_SHIFT);
+ for (i = 0; i < DDP_PGIDX_MAX; i++) {
+ /* first is the kernel page size, then just doubling the size */
+ ddp_page_order[i] = order - base_order + i;
+ ddp_page_shift[i] = PAGE_SHIFT + i;
+ }
+ return 0;
+}
+
static inline void ddp_gl_unmap(struct pci_dev *pdev,
struct cxgb3i_gather_list *gl)
{
@@ -598,30 +623,40 @@
* release all the resource held by the ddp pagepod manager for a given
* adapter if needed
*/
+
+static void ddp_cleanup(struct kref *kref)
+{
+ struct cxgb3i_ddp_info *ddp = container_of(kref,
+ struct cxgb3i_ddp_info,
+ refcnt);
+ int i = 0;
+
+ ddp_log_info("kref release ddp 0x%p, t3dev 0x%p.\n", ddp, ddp->tdev);
+
+ ddp->tdev->ulp_iscsi = NULL;
+ while (i < ddp->nppods) {
+ struct cxgb3i_gather_list *gl = ddp->gl_map[i];
+ if (gl) {
+ int npods = (gl->nelem + PPOD_PAGES_MAX - 1)
+ >> PPOD_PAGES_SHIFT;
+ ddp_log_info("t3dev 0x%p, ddp %d + %d.\n",
+ ddp->tdev, i, npods);
+ kfree(gl);
+ ddp_free_gl_skb(ddp, i, npods);
+ i += npods;
+ } else
+ i++;
+ }
+ cxgb3i_free_big_mem(ddp);
+}
+
void cxgb3i_ddp_cleanup(struct t3cdev *tdev)
{
- int i = 0;
struct cxgb3i_ddp_info *ddp = (struct cxgb3i_ddp_info *)tdev->ulp_iscsi;
ddp_log_info("t3dev 0x%p, release ddp 0x%p.\n", tdev, ddp);
-
- if (ddp) {
- tdev->ulp_iscsi = NULL;
- while (i < ddp->nppods) {
- struct cxgb3i_gather_list *gl = ddp->gl_map[i];
- if (gl) {
- int npods = (gl->nelem + PPOD_PAGES_MAX - 1)
- >> PPOD_PAGES_SHIFT;
- ddp_log_info("t3dev 0x%p, ddp %d + %d.\n",
- tdev, i, npods);
- kfree(gl);
- ddp_free_gl_skb(ddp, i, npods);
- i += npods;
- } else
- i++;
- }
- cxgb3i_free_big_mem(ddp);
- }
+ if (ddp)
+ kref_put(&ddp->refcnt, ddp_cleanup);
}
/**
@@ -631,12 +666,13 @@
*/
static void ddp_init(struct t3cdev *tdev)
{
- struct cxgb3i_ddp_info *ddp;
+ struct cxgb3i_ddp_info *ddp = tdev->ulp_iscsi;
struct ulp_iscsi_info uinfo;
unsigned int ppmax, bits;
int i, err;
- if (tdev->ulp_iscsi) {
+ if (ddp) {
+ kref_get(&ddp->refcnt);
ddp_log_warn("t3dev 0x%p, ddp 0x%p already set up.\n",
tdev, tdev->ulp_iscsi);
return;
@@ -670,6 +706,7 @@
ppmax *
sizeof(struct cxgb3i_gather_list *));
spin_lock_init(&ddp->map_lock);
+ kref_init(&ddp->refcnt);
ddp->tdev = tdev;
ddp->pdev = uinfo.pdev;
@@ -715,6 +752,17 @@
{
if (page_idx == DDP_PGIDX_MAX) {
page_idx = cxgb3i_ddp_find_page_index(PAGE_SIZE);
+
+ if (page_idx == DDP_PGIDX_MAX) {
+ ddp_log_info("system PAGE_SIZE %lu, update hw.\n",
+ PAGE_SIZE);
+ if (cxgb3i_ddp_adjust_page_table() < 0) {
+ ddp_log_info("PAGE_SIZE %lu, ddp disabled.\n",
+ PAGE_SIZE);
+ return;
+ }
+ page_idx = cxgb3i_ddp_find_page_index(PAGE_SIZE);
+ }
ddp_log_info("system PAGE_SIZE %lu, ddp idx %u.\n",
PAGE_SIZE, page_idx);
}
diff --git a/drivers/scsi/cxgb3i/cxgb3i_ddp.h b/drivers/scsi/cxgb3i/cxgb3i_ddp.h
index 0d296de..87dd56b 100644
--- a/drivers/scsi/cxgb3i/cxgb3i_ddp.h
+++ b/drivers/scsi/cxgb3i/cxgb3i_ddp.h
@@ -54,6 +54,7 @@
* struct cxgb3i_ddp_info - cxgb3i direct data placement for pdu payload
*
* @list: list head to link elements
+ * @refcnt: ref. count
* @tdev: pointer to t3cdev used by cxgb3 driver
* @max_txsz: max tx packet size for ddp
* @max_rxsz: max rx packet size for ddp
@@ -70,6 +71,7 @@
*/
struct cxgb3i_ddp_info {
struct list_head list;
+ struct kref refcnt;
struct t3cdev *tdev;
struct pci_dev *pdev;
unsigned int max_txsz;
diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c
index c15878e..0a5609b 100644
--- a/drivers/scsi/fcoe/fcoe.c
+++ b/drivers/scsi/fcoe/fcoe.c
@@ -45,8 +45,6 @@
#include "fcoe.h"
-static int debug_fcoe;
-
MODULE_AUTHOR("Open-FCoE.org");
MODULE_DESCRIPTION("FCoE");
MODULE_LICENSE("GPL v2");
@@ -305,23 +303,22 @@
#ifdef NETIF_F_FCOE_CRC
if (netdev->features & NETIF_F_FCOE_CRC) {
lp->crc_offload = 1;
- printk(KERN_DEBUG "fcoe:%s supports FCCRC offload\n",
- netdev->name);
+ FCOE_NETDEV_DBG(netdev, "Supports FCCRC offload\n");
}
#endif
#ifdef NETIF_F_FSO
if (netdev->features & NETIF_F_FSO) {
lp->seq_offload = 1;
lp->lso_max = netdev->gso_max_size;
- printk(KERN_DEBUG "fcoe:%s supports LSO for max len 0x%x\n",
- netdev->name, lp->lso_max);
+ FCOE_NETDEV_DBG(netdev, "Supports LSO for max len 0x%x\n",
+ lp->lso_max);
}
#endif
if (netdev->fcoe_ddp_xid) {
lp->lro_enabled = 1;
lp->lro_xid = netdev->fcoe_ddp_xid;
- printk(KERN_DEBUG "fcoe:%s supports LRO for max xid 0x%x\n",
- netdev->name, lp->lro_xid);
+ FCOE_NETDEV_DBG(netdev, "Supports LRO for max xid 0x%x\n",
+ lp->lro_xid);
}
skb_queue_head_init(&fc->fcoe_pending_queue);
fc->fcoe_pending_queue_active = 0;
@@ -407,7 +404,8 @@
/* add the new host to the SCSI-ml */
rc = scsi_add_host(lp->host, dev);
if (rc) {
- FC_DBG("fcoe_shost_config:error on scsi_add_host\n");
+ FCOE_NETDEV_DBG(fcoe_netdev(lp), "fcoe_shost_config: "
+ "error on scsi_add_host\n");
return rc;
}
sprintf(fc_host_symbolic_name(lp->host), "%s v%s over %s",
@@ -448,8 +446,7 @@
BUG_ON(!netdev);
- printk(KERN_DEBUG "fcoe_if_destroy:interface on %s\n",
- netdev->name);
+ FCOE_NETDEV_DBG(netdev, "Destroying interface\n");
lp = fcoe_hostlist_lookup(netdev);
if (!lp)
@@ -560,8 +557,7 @@
BUG_ON(!netdev);
- printk(KERN_DEBUG "fcoe_if_create:interface on %s\n",
- netdev->name);
+ FCOE_NETDEV_DBG(netdev, "Create Interface\n");
lp = fcoe_hostlist_lookup(netdev);
if (lp)
@@ -570,7 +566,7 @@
shost = libfc_host_alloc(&fcoe_shost_template,
sizeof(struct fcoe_softc));
if (!shost) {
- FC_DBG("Could not allocate host structure\n");
+ FCOE_NETDEV_DBG(netdev, "Could not allocate host structure\n");
return -ENOMEM;
}
lp = shost_priv(shost);
@@ -579,7 +575,8 @@
/* configure fc_lport, e.g., em */
rc = fcoe_lport_config(lp);
if (rc) {
- FC_DBG("Could not configure lport\n");
+ FCOE_NETDEV_DBG(netdev, "Could not configure lport for the "
+ "interface\n");
goto out_host_put;
}
@@ -593,28 +590,32 @@
/* configure lport network properties */
rc = fcoe_netdev_config(lp, netdev);
if (rc) {
- FC_DBG("Could not configure netdev for the interface\n");
+ FCOE_NETDEV_DBG(netdev, "Could not configure netdev for the "
+ "interface\n");
goto out_netdev_cleanup;
}
/* configure lport scsi host properties */
rc = fcoe_shost_config(lp, shost, &netdev->dev);
if (rc) {
- FC_DBG("Could not configure shost for lport\n");
+ FCOE_NETDEV_DBG(netdev, "Could not configure shost for the "
+ "interface\n");
goto out_netdev_cleanup;
}
/* lport exch manager allocation */
rc = fcoe_em_config(lp);
if (rc) {
- FC_DBG("Could not configure em for lport\n");
+ FCOE_NETDEV_DBG(netdev, "Could not configure the EM for the "
+ "interface\n");
goto out_netdev_cleanup;
}
/* Initialize the library */
rc = fcoe_libfc_config(lp, &fcoe_libfc_fcn_templ);
if (rc) {
- FC_DBG("Could not configure libfc for lport!\n");
+ FCOE_NETDEV_DBG(netdev, "Could not configure libfc for the "
+ "interface\n");
goto out_lp_destroy;
}
@@ -653,7 +654,7 @@
fc_attach_transport(&fcoe_transport_function);
if (!scsi_transport_fcoe_sw) {
- printk(KERN_ERR "fcoe_init:fc_attach_transport() failed\n");
+ printk(KERN_ERR "fcoe: Failed to attach to the FC transport\n");
return -ENODEV;
}
@@ -714,7 +715,7 @@
unsigned targ_cpu = smp_processor_id();
#endif /* CONFIG_SMP */
- printk(KERN_DEBUG "fcoe: Destroying receive thread for CPU %d\n", cpu);
+ FCOE_DBG("Destroying receive thread for CPU %d\n", cpu);
/* Prevent any new skbs from being queued for this CPU. */
p = &per_cpu(fcoe_percpu, cpu);
@@ -736,8 +737,8 @@
p0 = &per_cpu(fcoe_percpu, targ_cpu);
spin_lock_bh(&p0->fcoe_rx_list.lock);
if (p0->thread) {
- FC_DBG("Moving frames from CPU %d to CPU %d\n",
- cpu, targ_cpu);
+ FCOE_DBG("Moving frames from CPU %d to CPU %d\n",
+ cpu, targ_cpu);
while ((skb = __skb_dequeue(&p->fcoe_rx_list)) != NULL)
__skb_queue_tail(&p0->fcoe_rx_list, skb);
@@ -803,12 +804,12 @@
switch (action) {
case CPU_ONLINE:
case CPU_ONLINE_FROZEN:
- FC_DBG("CPU %x online: Create Rx thread\n", cpu);
+ FCOE_DBG("CPU %x online: Create Rx thread\n", cpu);
fcoe_percpu_thread_create(cpu);
break;
case CPU_DEAD:
case CPU_DEAD_FROZEN:
- FC_DBG("CPU %x offline: Remove Rx thread\n", cpu);
+ FCOE_DBG("CPU %x offline: Remove Rx thread\n", cpu);
fcoe_percpu_thread_destroy(cpu);
break;
default:
@@ -846,24 +847,21 @@
fc = container_of(ptype, struct fcoe_softc, fcoe_packet_type);
lp = fc->ctlr.lp;
if (unlikely(lp == NULL)) {
- FC_DBG("cannot find hba structure");
+ FCOE_NETDEV_DBG(dev, "Cannot find hba structure");
goto err2;
}
if (!lp->link_up)
goto err2;
- if (unlikely(debug_fcoe)) {
- FC_DBG("skb_info: len:%d data_len:%d head:%p data:%p tail:%p "
- "end:%p sum:%d dev:%s", skb->len, skb->data_len,
- skb->head, skb->data, skb_tail_pointer(skb),
- skb_end_pointer(skb), skb->csum,
- skb->dev ? skb->dev->name : "<NULL>");
-
- }
+ FCOE_NETDEV_DBG(dev, "skb_info: len:%d data_len:%d head:%p "
+ "data:%p tail:%p end:%p sum:%d dev:%s",
+ skb->len, skb->data_len, skb->head, skb->data,
+ skb_tail_pointer(skb), skb_end_pointer(skb),
+ skb->csum, skb->dev ? skb->dev->name : "<NULL>");
/* check for FCOE packet type */
if (unlikely(eth_hdr(skb)->h_proto != htons(ETH_P_FCOE))) {
- FC_DBG("wrong FC type frame");
+ FCOE_NETDEV_DBG(dev, "Wrong FC type frame");
goto err;
}
@@ -901,8 +899,9 @@
* the first CPU now. For non-SMP systems this
* will check the same CPU twice.
*/
- FC_DBG("CPU is online, but no receive thread ready "
- "for incoming skb- using first online CPU.\n");
+ FCOE_NETDEV_DBG(dev, "CPU is online, but no receive thread "
+ "ready for incoming skb- using first online "
+ "CPU.\n");
spin_unlock_bh(&fps->fcoe_rx_list.lock);
cpu = first_cpu(cpu_online_map);
@@ -1201,19 +1200,17 @@
fr = fcoe_dev_from_skb(skb);
lp = fr->fr_dev;
if (unlikely(lp == NULL)) {
- FC_DBG("invalid HBA Structure");
+ FCOE_NETDEV_DBG(skb->dev, "Invalid HBA Structure");
kfree_skb(skb);
continue;
}
- if (unlikely(debug_fcoe)) {
- FC_DBG("skb_info: len:%d data_len:%d head:%p data:%p "
- "tail:%p end:%p sum:%d dev:%s",
- skb->len, skb->data_len,
- skb->head, skb->data, skb_tail_pointer(skb),
- skb_end_pointer(skb), skb->csum,
- skb->dev ? skb->dev->name : "<NULL>");
- }
+ FCOE_NETDEV_DBG(skb->dev, "skb_info: len:%d data_len:%d "
+ "head:%p data:%p tail:%p end:%p sum:%d dev:%s",
+ skb->len, skb->data_len,
+ skb->head, skb->data, skb_tail_pointer(skb),
+ skb_end_pointer(skb), skb->csum,
+ skb->dev ? skb->dev->name : "<NULL>");
/*
* Save source MAC address before discarding header.
@@ -1233,7 +1230,7 @@
stats = fc_lport_get_stats(lp);
if (unlikely(FC_FCOE_DECAPS_VER(hp) != FC_FCOE_VER)) {
if (stats->ErrorFrames < 5)
- printk(KERN_WARNING "FCoE version "
+ printk(KERN_WARNING "fcoe: FCoE version "
"mismatch: The frame has "
"version %x, but the "
"initiator supports version "
@@ -1286,7 +1283,7 @@
if (fr_flags(fp) & FCPHF_CRC_UNCHECKED) {
if (le32_to_cpu(fr_crc(fp)) !=
~crc32(~0, skb->data, fr_len)) {
- if (debug_fcoe || stats->InvalidCRCCount < 5)
+ if (stats->InvalidCRCCount < 5)
printk(KERN_WARNING "fcoe: dropping "
"frame with CRC error\n");
stats->InvalidCRCCount++;
@@ -1432,7 +1429,8 @@
case NETDEV_REGISTER:
break;
default:
- FC_DBG("Unknown event %ld from netdev netlink\n", event);
+ FCOE_NETDEV_DBG(real_dev, "Unknown event %ld "
+ "from netdev netlink\n", event);
}
if (link_possible && !fcoe_link_ok(lp))
fcoe_ctlr_link_up(&fc->ctlr);
@@ -1505,8 +1503,8 @@
owner = fcoe_netdev_to_module_owner(netdev);
if (owner) {
- printk(KERN_DEBUG "fcoe:hold driver module %s for %s\n",
- module_name(owner), netdev->name);
+ FCOE_NETDEV_DBG(netdev, "Hold driver module %s\n",
+ module_name(owner));
return try_module_get(owner);
}
return -ENODEV;
@@ -1527,8 +1525,8 @@
owner = fcoe_netdev_to_module_owner(netdev);
if (owner) {
- printk(KERN_DEBUG "fcoe:release driver module %s for %s\n",
- module_name(owner), netdev->name);
+ FCOE_NETDEV_DBG(netdev, "Release driver module %s\n",
+ module_name(owner));
module_put(owner);
return 0;
}
@@ -1559,7 +1557,7 @@
}
rc = fcoe_if_destroy(netdev);
if (rc) {
- printk(KERN_ERR "fcoe: fcoe_if_destroy(%s) failed\n",
+ printk(KERN_ERR "fcoe: Failed to destroy interface (%s)\n",
netdev->name);
rc = -EIO;
goto out_putdev;
@@ -1598,7 +1596,7 @@
rc = fcoe_if_create(netdev);
if (rc) {
- printk(KERN_ERR "fcoe: fcoe_if_create(%s) failed\n",
+ printk(KERN_ERR "fcoe: Failed to create interface (%s)\n",
netdev->name);
fcoe_ethdrv_put(netdev);
rc = -EIO;
diff --git a/drivers/scsi/fcoe/fcoe.h b/drivers/scsi/fcoe/fcoe.h
index a1eb8c1..0d724fa 100644
--- a/drivers/scsi/fcoe/fcoe.h
+++ b/drivers/scsi/fcoe/fcoe.h
@@ -40,6 +40,30 @@
#define FCOE_MIN_XID 0x0001 /* the min xid supported by fcoe_sw */
#define FCOE_MAX_XID 0x07ef /* the max xid supported by fcoe_sw */
+unsigned int fcoe_debug_logging;
+module_param_named(debug_logging, fcoe_debug_logging, int, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(debug_logging, "a bit mask of logging levels");
+
+#define FCOE_LOGGING 0x01 /* General logging, not categorized */
+#define FCOE_NETDEV_LOGGING 0x02 /* Netdevice logging */
+
+#define FCOE_CHECK_LOGGING(LEVEL, CMD) \
+do { \
+ if (unlikely(fcoe_debug_logging & LEVEL)) \
+ do { \
+ CMD; \
+ } while (0); \
+} while (0);
+
+#define FCOE_DBG(fmt, args...) \
+ FCOE_CHECK_LOGGING(FCOE_LOGGING, \
+ printk(KERN_INFO "fcoe: " fmt, ##args);)
+
+#define FCOE_NETDEV_DBG(netdev, fmt, args...) \
+ FCOE_CHECK_LOGGING(FCOE_NETDEV_LOGGING, \
+ printk(KERN_INFO "fcoe: %s" fmt, \
+ netdev->name, ##args);)
+
/*
* this percpu struct for fcoe
*/
diff --git a/drivers/scsi/fcoe/libfcoe.c b/drivers/scsi/fcoe/libfcoe.c
index 2f5bc7f..f544340 100644
--- a/drivers/scsi/fcoe/libfcoe.c
+++ b/drivers/scsi/fcoe/libfcoe.c
@@ -56,15 +56,28 @@
static u8 fcoe_all_fcfs[ETH_ALEN] = FIP_ALL_FCF_MACS;
-static u32 fcoe_ctlr_debug; /* 1 for basic, 2 for noisy debug */
+unsigned int libfcoe_debug_logging;
+module_param_named(debug_logging, libfcoe_debug_logging, int, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(debug_logging, "a bit mask of logging levels");
-#define FIP_DBG_LVL(level, fmt, args...) \
+#define LIBFCOE_LOGGING 0x01 /* General logging, not categorized */
+#define LIBFCOE_FIP_LOGGING 0x02 /* FIP logging */
+
+#define LIBFCOE_CHECK_LOGGING(LEVEL, CMD) \
+do { \
+ if (unlikely(libfcoe_debug_logging & LEVEL)) \
do { \
- if (fcoe_ctlr_debug >= (level)) \
- FC_DBG(fmt, ##args); \
- } while (0)
+ CMD; \
+ } while (0); \
+} while (0);
-#define FIP_DBG(fmt, args...) FIP_DBG_LVL(1, fmt, ##args)
+#define LIBFCOE_DBG(fmt, args...) \
+ LIBFCOE_CHECK_LOGGING(LIBFCOE_LOGGING, \
+ printk(KERN_INFO "libfcoe: " fmt, ##args);)
+
+#define LIBFCOE_FIP_DBG(fmt, args...) \
+ LIBFCOE_CHECK_LOGGING(LIBFCOE_FIP_LOGGING, \
+ printk(KERN_INFO "fip: " fmt, ##args);)
/*
* Return non-zero if FCF fcoe_size has been validated.
@@ -243,7 +256,7 @@
fip->last_link = 1;
fip->link = 1;
spin_unlock_bh(&fip->lock);
- FIP_DBG("%s", "setting AUTO mode.\n");
+ LIBFCOE_FIP_DBG("%s", "setting AUTO mode.\n");
fc_linkup(fip->lp);
fcoe_ctlr_solicit(fip, NULL);
} else
@@ -614,7 +627,8 @@
((struct fip_mac_desc *)desc)->fd_mac,
ETH_ALEN);
if (!is_valid_ether_addr(fcf->fcf_mac)) {
- FIP_DBG("invalid MAC addr in FIP adv\n");
+ LIBFCOE_FIP_DBG("Invalid MAC address "
+ "in FIP adv\n");
return -EINVAL;
}
break;
@@ -647,8 +661,8 @@
case FIP_DT_LOGO:
case FIP_DT_ELP:
default:
- FIP_DBG("unexpected descriptor type %x in FIP adv\n",
- desc->fip_dtype);
+ LIBFCOE_FIP_DBG("unexpected descriptor type %x "
+ "in FIP adv\n", desc->fip_dtype);
/* standard says ignore unknown descriptors >= 128 */
if (desc->fip_dtype < FIP_DT_VENDOR_BASE)
return -EINVAL;
@@ -664,8 +678,8 @@
return 0;
len_err:
- FIP_DBG("FIP length error in descriptor type %x len %zu\n",
- desc->fip_dtype, dlen);
+ LIBFCOE_FIP_DBG("FIP length error in descriptor type %x len %zu\n",
+ desc->fip_dtype, dlen);
return -EINVAL;
}
@@ -728,9 +742,10 @@
}
mtu_valid = fcoe_ctlr_mtu_valid(fcf);
fcf->time = jiffies;
- FIP_DBG_LVL(found ? 2 : 1, "%s FCF for fab %llx map %x val %d\n",
- found ? "old" : "new",
- fcf->fabric_name, fcf->fc_map, mtu_valid);
+ if (!found) {
+ LIBFCOE_FIP_DBG("New FCF for fab %llx map %x val %d\n",
+ fcf->fabric_name, fcf->fc_map, mtu_valid);
+ }
/*
* If this advertisement is not solicited and our max receive size
@@ -807,7 +822,8 @@
((struct fip_mac_desc *)desc)->fd_mac,
ETH_ALEN);
if (!is_valid_ether_addr(granted_mac)) {
- FIP_DBG("invalid MAC addrs in FIP ELS\n");
+ LIBFCOE_FIP_DBG("Invalid MAC address "
+ "in FIP ELS\n");
goto drop;
}
break;
@@ -825,8 +841,8 @@
els_dtype = desc->fip_dtype;
break;
default:
- FIP_DBG("unexpected descriptor type %x "
- "in FIP adv\n", desc->fip_dtype);
+ LIBFCOE_FIP_DBG("unexpected descriptor type %x "
+ "in FIP adv\n", desc->fip_dtype);
/* standard says ignore unknown descriptors >= 128 */
if (desc->fip_dtype < FIP_DT_VENDOR_BASE)
goto drop;
@@ -867,8 +883,8 @@
return;
len_err:
- FIP_DBG("FIP length error in descriptor type %x len %zu\n",
- desc->fip_dtype, dlen);
+ LIBFCOE_FIP_DBG("FIP length error in descriptor type %x len %zu\n",
+ desc->fip_dtype, dlen);
drop:
kfree_skb(skb);
}
@@ -894,7 +910,7 @@
struct fc_lport *lp = fip->lp;
u32 desc_mask;
- FIP_DBG("Clear Virtual Link received\n");
+ LIBFCOE_FIP_DBG("Clear Virtual Link received\n");
if (!fcf)
return;
if (!fcf || !fc_host_port_id(lp->host))
@@ -952,9 +968,9 @@
* reset only if all required descriptors were present and valid.
*/
if (desc_mask) {
- FIP_DBG("missing descriptors mask %x\n", desc_mask);
+ LIBFCOE_FIP_DBG("missing descriptors mask %x\n", desc_mask);
} else {
- FIP_DBG("performing Clear Virtual Link\n");
+ LIBFCOE_FIP_DBG("performing Clear Virtual Link\n");
fcoe_ctlr_reset(fip, FIP_ST_ENABLED);
}
}
@@ -1002,10 +1018,6 @@
op = ntohs(fiph->fip_op);
sub = fiph->fip_subcode;
- FIP_DBG_LVL(2, "ver %x op %x/%x dl %x fl %x\n",
- FIP_VER_DECAPS(fiph->fip_ver), op, sub,
- ntohs(fiph->fip_dl_len), ntohs(fiph->fip_flags));
-
if (FIP_VER_DECAPS(fiph->fip_ver) != FIP_VER)
goto drop;
if (ntohs(fiph->fip_dl_len) * FIP_BPW + sizeof(*fiph) > skb->len)
@@ -1017,7 +1029,7 @@
fip->map_dest = 0;
fip->state = FIP_ST_ENABLED;
state = FIP_ST_ENABLED;
- FIP_DBG("using FIP mode\n");
+ LIBFCOE_FIP_DBG("Using FIP mode\n");
}
spin_unlock_bh(&fip->lock);
if (state != FIP_ST_ENABLED)
@@ -1052,14 +1064,15 @@
struct fcoe_fcf *best = NULL;
list_for_each_entry(fcf, &fip->fcfs, list) {
- FIP_DBG("consider FCF for fab %llx VFID %d map %x val %d\n",
- fcf->fabric_name, fcf->vfid,
- fcf->fc_map, fcoe_ctlr_mtu_valid(fcf));
+ LIBFCOE_FIP_DBG("consider FCF for fab %llx VFID %d map %x "
+ "val %d\n", fcf->fabric_name, fcf->vfid,
+ fcf->fc_map, fcoe_ctlr_mtu_valid(fcf));
if (!fcoe_ctlr_fcf_usable(fcf)) {
- FIP_DBG("FCF for fab %llx map %x %svalid %savailable\n",
- fcf->fabric_name, fcf->fc_map,
- (fcf->flags & FIP_FL_SOL) ? "" : "in",
- (fcf->flags & FIP_FL_AVAIL) ? "" : "un");
+ LIBFCOE_FIP_DBG("FCF for fab %llx map %x %svalid "
+ "%savailable\n", fcf->fabric_name,
+ fcf->fc_map, (fcf->flags & FIP_FL_SOL)
+ ? "" : "in", (fcf->flags & FIP_FL_AVAIL)
+ ? "" : "un");
continue;
}
if (!best) {
@@ -1069,7 +1082,8 @@
if (fcf->fabric_name != best->fabric_name ||
fcf->vfid != best->vfid ||
fcf->fc_map != best->fc_map) {
- FIP_DBG("conflicting fabric, VFID, or FC-MAP\n");
+ LIBFCOE_FIP_DBG("Conflicting fabric, VFID, "
+ "or FC-MAP\n");
return;
}
if (fcf->pri < best->pri)
@@ -1113,7 +1127,7 @@
if (sel != fcf) {
fcf = sel; /* the old FCF may have been freed */
if (sel) {
- printk(KERN_INFO "host%d: FIP selected "
+ printk(KERN_INFO "libfcoe: host%d: FIP selected "
"Fibre-Channel Forwarder MAC %s\n",
fip->lp->host->host_no,
print_mac(buf, sel->fcf_mac));
@@ -1123,7 +1137,7 @@
fip->ctlr_ka_time = jiffies + sel->fka_period;
fip->link = 1;
} else {
- printk(KERN_NOTICE "host%d: "
+ printk(KERN_NOTICE "libfcoe: host%d: "
"FIP Fibre-Channel Forwarder timed out. "
"Starting FCF discovery.\n",
fip->lp->host->host_no);
@@ -1247,7 +1261,7 @@
return -EINVAL;
}
fip->state = FIP_ST_NON_FIP;
- FIP_DBG("received FLOGI LS_ACC using non-FIP mode\n");
+ LIBFCOE_FIP_DBG("received FLOGI LS_ACC using non-FIP mode\n");
/*
* FLOGI accepted.
@@ -1276,7 +1290,7 @@
memcpy(fip->dest_addr, sa, ETH_ALEN);
fip->map_dest = 0;
if (fip->state == FIP_ST_NON_FIP)
- FIP_DBG("received FLOGI REQ, "
+ LIBFCOE_FIP_DBG("received FLOGI REQ, "
"using non-FIP mode\n");
fip->state = FIP_ST_NON_FIP;
}
diff --git a/drivers/scsi/hosts.c b/drivers/scsi/hosts.c
index 89d41a4..5fd2da4 100644
--- a/drivers/scsi/hosts.c
+++ b/drivers/scsi/hosts.c
@@ -40,7 +40,7 @@
#include "scsi_logging.h"
-static int scsi_host_next_hn; /* host_no for next new host */
+static atomic_t scsi_host_next_hn; /* host_no for next new host */
static void scsi_host_cls_release(struct device *dev)
@@ -333,7 +333,11 @@
mutex_init(&shost->scan_mutex);
- shost->host_no = scsi_host_next_hn++; /* XXX(hch): still racy */
+ /*
+ * subtract one because we increment first then return, but we need to
+ * know what the next host number was before increment
+ */
+ shost->host_no = atomic_inc_return(&scsi_host_next_hn) - 1;
shost->dma_channel = 0xff;
/* These three are default values which can be overridden */
diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
index b4b805e..166d964 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -2254,10 +2254,13 @@
continue;
if (crq->node_name && tgt->ids.node_name != crq->node_name)
continue;
- ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DEL_RPORT);
+ if (tgt->need_login && crq->event == IBMVFC_AE_ELS_LOGO)
+ tgt->logo_rcvd = 1;
+ if (!tgt->need_login || crq->event == IBMVFC_AE_ELS_PLOGI) {
+ ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DEL_RPORT);
+ ibmvfc_reinit_host(vhost);
+ }
}
-
- ibmvfc_reinit_host(vhost);
break;
case IBMVFC_AE_LINK_DOWN:
case IBMVFC_AE_ADAPTER_FAILED:
@@ -2783,27 +2786,27 @@
spin_lock_irqsave(vhost->host->host_lock, flags);
while (!done) {
- /* Pull all the valid messages off the CRQ */
- while ((crq = ibmvfc_next_crq(vhost)) != NULL) {
- ibmvfc_handle_crq(crq, vhost);
- crq->valid = 0;
- }
-
/* Pull all the valid messages off the async CRQ */
while ((async = ibmvfc_next_async_crq(vhost)) != NULL) {
ibmvfc_handle_async(async, vhost);
async->valid = 0;
}
- vio_enable_interrupts(vdev);
- if ((crq = ibmvfc_next_crq(vhost)) != NULL) {
- vio_disable_interrupts(vdev);
+ /* Pull all the valid messages off the CRQ */
+ while ((crq = ibmvfc_next_crq(vhost)) != NULL) {
ibmvfc_handle_crq(crq, vhost);
crq->valid = 0;
- } else if ((async = ibmvfc_next_async_crq(vhost)) != NULL) {
+ }
+
+ vio_enable_interrupts(vdev);
+ if ((async = ibmvfc_next_async_crq(vhost)) != NULL) {
vio_disable_interrupts(vdev);
ibmvfc_handle_async(async, vhost);
async->valid = 0;
+ } else if ((crq = ibmvfc_next_crq(vhost)) != NULL) {
+ vio_disable_interrupts(vdev);
+ ibmvfc_handle_crq(crq, vhost);
+ crq->valid = 0;
} else
done = 1;
}
@@ -2927,7 +2930,11 @@
break;
case IBMVFC_MAD_FAILED:
default:
- if (ibmvfc_retry_cmd(rsp->status, rsp->error))
+ if ((rsp->status & IBMVFC_VIOS_FAILURE) && rsp->error == IBMVFC_PLOGI_REQUIRED)
+ level += ibmvfc_retry_tgt_init(tgt, ibmvfc_tgt_send_plogi);
+ else if (tgt->logo_rcvd)
+ level += ibmvfc_retry_tgt_init(tgt, ibmvfc_tgt_send_plogi);
+ else if (ibmvfc_retry_cmd(rsp->status, rsp->error))
level += ibmvfc_retry_tgt_init(tgt, ibmvfc_tgt_send_prli);
else
ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DEL_RPORT);
@@ -3054,6 +3061,7 @@
return;
kref_get(&tgt->kref);
+ tgt->logo_rcvd = 0;
evt = ibmvfc_get_event(vhost);
vhost->discovery_threads++;
ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_INIT_WAIT);
diff --git a/drivers/scsi/ibmvscsi/ibmvfc.h b/drivers/scsi/ibmvscsi/ibmvfc.h
index c2668d7..007fa1c9 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.h
+++ b/drivers/scsi/ibmvscsi/ibmvfc.h
@@ -605,6 +605,7 @@
int need_login;
int add_rport;
int init_retries;
+ int logo_rcvd;
u32 cancel_key;
struct ibmvfc_service_parms service_parms;
struct ibmvfc_service_parms service_parms_change;
diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index 0f8bc77..5f04550 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -131,13 +131,13 @@
};
static const struct ipr_chip_t ipr_chip[] = {
- { PCI_VENDOR_ID_MYLEX, PCI_DEVICE_ID_IBM_GEMSTONE, &ipr_chip_cfg[0] },
- { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CITRINE, &ipr_chip_cfg[0] },
- { PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_OBSIDIAN, &ipr_chip_cfg[0] },
- { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN, &ipr_chip_cfg[0] },
- { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN_E, &ipr_chip_cfg[0] },
- { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_SNIPE, &ipr_chip_cfg[1] },
- { PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_SCAMP, &ipr_chip_cfg[1] }
+ { PCI_VENDOR_ID_MYLEX, PCI_DEVICE_ID_IBM_GEMSTONE, IPR_USE_LSI, &ipr_chip_cfg[0] },
+ { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CITRINE, IPR_USE_LSI, &ipr_chip_cfg[0] },
+ { PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_OBSIDIAN, IPR_USE_LSI, &ipr_chip_cfg[0] },
+ { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN, IPR_USE_LSI, &ipr_chip_cfg[0] },
+ { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN_E, IPR_USE_MSI, &ipr_chip_cfg[0] },
+ { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_SNIPE, IPR_USE_LSI, &ipr_chip_cfg[1] },
+ { PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_SCAMP, IPR_USE_LSI, &ipr_chip_cfg[1] }
};
static int ipr_max_bus_speeds [] = {
@@ -7367,6 +7367,7 @@
INIT_LIST_HEAD(&ioa_cfg->used_res_q);
INIT_WORK(&ioa_cfg->work_q, ipr_worker_thread);
init_waitqueue_head(&ioa_cfg->reset_wait_q);
+ init_waitqueue_head(&ioa_cfg->msi_wait_q);
ioa_cfg->sdt_state = INACTIVE;
if (ipr_enable_cache)
ioa_cfg->cache_state = CACHE_ENABLED;
@@ -7398,25 +7399,108 @@
}
/**
- * ipr_get_chip_cfg - Find adapter chip configuration
+ * ipr_get_chip_info - Find adapter chip information
* @dev_id: PCI device id struct
*
* Return value:
- * ptr to chip config on success / NULL on failure
+ * ptr to chip information on success / NULL on failure
**/
-static const struct ipr_chip_cfg_t * __devinit
-ipr_get_chip_cfg(const struct pci_device_id *dev_id)
+static const struct ipr_chip_t * __devinit
+ipr_get_chip_info(const struct pci_device_id *dev_id)
{
int i;
for (i = 0; i < ARRAY_SIZE(ipr_chip); i++)
if (ipr_chip[i].vendor == dev_id->vendor &&
ipr_chip[i].device == dev_id->device)
- return ipr_chip[i].cfg;
+ return &ipr_chip[i];
return NULL;
}
/**
+ * ipr_test_intr - Handle the interrupt generated in ipr_test_msi().
+ * @pdev: PCI device struct
+ *
+ * Description: Simply set the msi_received flag to 1 indicating that
+ * Message Signaled Interrupts are supported.
+ *
+ * Return value:
+ * 0 on success / non-zero on failure
+ **/
+static irqreturn_t __devinit ipr_test_intr(int irq, void *devp)
+{
+ struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)devp;
+ unsigned long lock_flags = 0;
+ irqreturn_t rc = IRQ_HANDLED;
+
+ spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
+
+ ioa_cfg->msi_received = 1;
+ wake_up(&ioa_cfg->msi_wait_q);
+
+ spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
+ return rc;
+}
+
+/**
+ * ipr_test_msi - Test for Message Signaled Interrupt (MSI) support.
+ * @pdev: PCI device struct
+ *
+ * Description: The return value from pci_enable_msi() can not always be
+ * trusted. This routine sets up and initiates a test interrupt to determine
+ * if the interrupt is received via the ipr_test_intr() service routine.
+ * If the tests fails, the driver will fall back to LSI.
+ *
+ * Return value:
+ * 0 on success / non-zero on failure
+ **/
+static int __devinit ipr_test_msi(struct ipr_ioa_cfg *ioa_cfg,
+ struct pci_dev *pdev)
+{
+ int rc;
+ volatile u32 int_reg;
+ unsigned long lock_flags = 0;
+
+ ENTER;
+
+ spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
+ init_waitqueue_head(&ioa_cfg->msi_wait_q);
+ ioa_cfg->msi_received = 0;
+ ipr_mask_and_clear_interrupts(ioa_cfg, ~IPR_PCII_IOA_TRANS_TO_OPER);
+ writel(IPR_PCII_IO_DEBUG_ACKNOWLEDGE, ioa_cfg->regs.clr_interrupt_mask_reg);
+ int_reg = readl(ioa_cfg->regs.sense_interrupt_mask_reg);
+ spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
+
+ rc = request_irq(pdev->irq, ipr_test_intr, 0, IPR_NAME, ioa_cfg);
+ if (rc) {
+ dev_err(&pdev->dev, "Can not assign irq %d\n", pdev->irq);
+ return rc;
+ } else if (ipr_debug)
+ dev_info(&pdev->dev, "IRQ assigned: %d\n", pdev->irq);
+
+ writel(IPR_PCII_IO_DEBUG_ACKNOWLEDGE, ioa_cfg->regs.sense_interrupt_reg);
+ int_reg = readl(ioa_cfg->regs.sense_interrupt_reg);
+ wait_event_timeout(ioa_cfg->msi_wait_q, ioa_cfg->msi_received, HZ);
+ ipr_mask_and_clear_interrupts(ioa_cfg, ~IPR_PCII_IOA_TRANS_TO_OPER);
+
+ spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
+ if (!ioa_cfg->msi_received) {
+ /* MSI test failed */
+ dev_info(&pdev->dev, "MSI test failed. Falling back to LSI.\n");
+ rc = -EOPNOTSUPP;
+ } else if (ipr_debug)
+ dev_info(&pdev->dev, "MSI test succeeded.\n");
+
+ spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
+
+ free_irq(pdev->irq, ioa_cfg);
+
+ LEAVE;
+
+ return rc;
+}
+
+/**
* ipr_probe_ioa - Allocates memory and does first stage of initialization
* @pdev: PCI device struct
* @dev_id: PCI device id struct
@@ -7441,11 +7525,6 @@
goto out;
}
- if (!(rc = pci_enable_msi(pdev)))
- dev_info(&pdev->dev, "MSI enabled\n");
- else if (ipr_debug)
- dev_info(&pdev->dev, "Cannot enable MSI\n");
-
dev_info(&pdev->dev, "Found IOA with IRQ: %d\n", pdev->irq);
host = scsi_host_alloc(&driver_template, sizeof(*ioa_cfg));
@@ -7461,14 +7540,16 @@
ata_host_init(&ioa_cfg->ata_host, &pdev->dev,
sata_port_info.flags, &ipr_sata_ops);
- ioa_cfg->chip_cfg = ipr_get_chip_cfg(dev_id);
+ ioa_cfg->ipr_chip = ipr_get_chip_info(dev_id);
- if (!ioa_cfg->chip_cfg) {
+ if (!ioa_cfg->ipr_chip) {
dev_err(&pdev->dev, "Unknown adapter chipset 0x%04X 0x%04X\n",
dev_id->vendor, dev_id->device);
goto out_scsi_host_put;
}
+ ioa_cfg->chip_cfg = ioa_cfg->ipr_chip->cfg;
+
if (ipr_transop_timeout)
ioa_cfg->transop_timeout = ipr_transop_timeout;
else if (dev_id->driver_data & IPR_USE_LONG_TRANSOP_TIMEOUT)
@@ -7519,6 +7600,18 @@
goto cleanup_nomem;
}
+ /* Enable MSI style interrupts if they are supported. */
+ if (ioa_cfg->ipr_chip->intr_type == IPR_USE_MSI && !pci_enable_msi(pdev)) {
+ rc = ipr_test_msi(ioa_cfg, pdev);
+ if (rc == -EOPNOTSUPP)
+ pci_disable_msi(pdev);
+ else if (rc)
+ goto out_msi_disable;
+ else
+ dev_info(&pdev->dev, "MSI enabled with IRQ: %d\n", pdev->irq);
+ } else if (ipr_debug)
+ dev_info(&pdev->dev, "Cannot enable MSI.\n");
+
/* Save away PCI config space for use following IOA reset */
rc = pci_save_state(pdev);
@@ -7556,7 +7649,9 @@
ioa_cfg->ioa_unit_checked = 1;
ipr_mask_and_clear_interrupts(ioa_cfg, ~IPR_PCII_IOA_TRANS_TO_OPER);
- rc = request_irq(pdev->irq, ipr_isr, IRQF_SHARED, IPR_NAME, ioa_cfg);
+ rc = request_irq(pdev->irq, ipr_isr,
+ ioa_cfg->msi_received ? 0 : IRQF_SHARED,
+ IPR_NAME, ioa_cfg);
if (rc) {
dev_err(&pdev->dev, "Couldn't register IRQ %d! rc=%d\n",
@@ -7583,12 +7678,13 @@
ipr_free_mem(ioa_cfg);
cleanup_nomem:
iounmap(ipr_regs);
+out_msi_disable:
+ pci_disable_msi(pdev);
out_release_regions:
pci_release_regions(pdev);
out_scsi_host_put:
scsi_host_put(host);
out_disable:
- pci_disable_msi(pdev);
pci_disable_device(pdev);
goto out;
}
diff --git a/drivers/scsi/ipr.h b/drivers/scsi/ipr.h
index 79a3ae4..4b63dd6 100644
--- a/drivers/scsi/ipr.h
+++ b/drivers/scsi/ipr.h
@@ -37,8 +37,8 @@
/*
* Literals
*/
-#define IPR_DRIVER_VERSION "2.4.2"
-#define IPR_DRIVER_DATE "(January 21, 2009)"
+#define IPR_DRIVER_VERSION "2.4.3"
+#define IPR_DRIVER_DATE "(June 10, 2009)"
/*
* IPR_MAX_CMD_PER_LUN: This defines the maximum number of outstanding
@@ -1025,6 +1025,9 @@
struct ipr_chip_t {
u16 vendor;
u16 device;
+ u16 intr_type;
+#define IPR_USE_LSI 0x00
+#define IPR_USE_MSI 0x01
const struct ipr_chip_cfg_t *cfg;
};
@@ -1094,6 +1097,7 @@
u8 needs_hard_reset:1;
u8 dual_raid:1;
u8 needs_warm_reset:1;
+ u8 msi_received:1;
u8 revid;
@@ -1159,6 +1163,7 @@
unsigned int transop_timeout;
const struct ipr_chip_cfg_t *chip_cfg;
+ const struct ipr_chip_t *ipr_chip;
void __iomem *hdw_dma_regs; /* iomapped PCI memory space */
unsigned long hdw_dma_regs_pci; /* raw PCI memory space */
@@ -1179,6 +1184,7 @@
struct work_struct work_q;
wait_queue_head_t reset_wait_q;
+ wait_queue_head_t msi_wait_q;
struct ipr_dump *dump;
enum ipr_sdt_state sdt_state;
diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c
index b7c092d6..518dbd9 100644
--- a/drivers/scsi/iscsi_tcp.c
+++ b/drivers/scsi/iscsi_tcp.c
@@ -253,8 +253,6 @@
if (r < 0) {
iscsi_tcp_segment_unmap(segment);
- if (copied || r == -EAGAIN)
- break;
return r;
}
copied += r;
@@ -275,11 +273,17 @@
while (1) {
rc = iscsi_sw_tcp_xmit_segment(tcp_conn, segment);
- if (rc < 0) {
+ /*
+ * We may not have been able to send data because the conn
+ * is getting stopped. libiscsi will know so propogate err
+ * for it to do the right thing.
+ */
+ if (rc == -EAGAIN)
+ return rc;
+ else if (rc < 0) {
rc = ISCSI_ERR_XMIT_FAILED;
goto error;
- }
- if (rc == 0)
+ } else if (rc == 0)
break;
consumed += rc;
diff --git a/drivers/scsi/libfc/fc_disc.c b/drivers/scsi/libfc/fc_disc.c
index 4c880656..6fabf66 100644
--- a/drivers/scsi/libfc/fc_disc.c
+++ b/drivers/scsi/libfc/fc_disc.c
@@ -45,14 +45,6 @@
#define FC_DISC_DELAY 3
-static int fc_disc_debug;
-
-#define FC_DEBUG_DISC(fmt...) \
- do { \
- if (fc_disc_debug) \
- FC_DBG(fmt); \
- } while (0)
-
static void fc_disc_gpn_ft_req(struct fc_disc *);
static void fc_disc_gpn_ft_resp(struct fc_seq *, struct fc_frame *, void *);
static int fc_disc_new_target(struct fc_disc *, struct fc_rport *,
@@ -137,8 +129,8 @@
struct fc_rport_libfc_priv *rdata = rport->dd_data;
struct fc_disc *disc = &lport->disc;
- FC_DEBUG_DISC("Received a %d event for port (%6x)\n", event,
- rport->port_id);
+ FC_DISC_DBG(disc, "Received a %d event for port (%6x)\n", event,
+ rport->port_id);
switch (event) {
case RPORT_EV_CREATED:
@@ -191,8 +183,7 @@
lport = disc->lport;
- FC_DEBUG_DISC("Received an RSCN event on port (%6x)\n",
- fc_host_port_id(lport->host));
+ FC_DISC_DBG(disc, "Received an RSCN event\n");
/* make sure the frame contains an RSCN message */
rp = fc_frame_payload_get(fp, sizeof(*rp));
@@ -225,8 +216,8 @@
*/
switch (fmt) {
case ELS_ADDR_FMT_PORT:
- FC_DEBUG_DISC("Port address format for port (%6x)\n",
- ntoh24(pp->rscn_fid));
+ FC_DISC_DBG(disc, "Port address format for port "
+ "(%6x)\n", ntoh24(pp->rscn_fid));
dp = kzalloc(sizeof(*dp), GFP_KERNEL);
if (!dp) {
redisc = 1;
@@ -243,19 +234,19 @@
case ELS_ADDR_FMT_DOM:
case ELS_ADDR_FMT_FAB:
default:
- FC_DEBUG_DISC("Address format is (%d)\n", fmt);
+ FC_DISC_DBG(disc, "Address format is (%d)\n", fmt);
redisc = 1;
break;
}
}
lport->tt.seq_els_rsp_send(sp, ELS_LS_ACC, NULL);
if (redisc) {
- FC_DEBUG_DISC("RSCN received: rediscovering\n");
+ FC_DISC_DBG(disc, "RSCN received: rediscovering\n");
fc_disc_restart(disc);
} else {
- FC_DEBUG_DISC("RSCN received: not rediscovering. "
- "redisc %d state %d in_prog %d\n",
- redisc, lport->state, disc->pending);
+ FC_DISC_DBG(disc, "RSCN received: not rediscovering. "
+ "redisc %d state %d in_prog %d\n",
+ redisc, lport->state, disc->pending);
list_for_each_entry_safe(dp, next, &disc_ports, peers) {
list_del(&dp->peers);
rport = lport->tt.rport_lookup(lport, dp->ids.port_id);
@@ -270,7 +261,7 @@
fc_frame_free(fp);
return;
reject:
- FC_DEBUG_DISC("Received a bad RSCN frame\n");
+ FC_DISC_DBG(disc, "Received a bad RSCN frame\n");
rjt_data.fp = NULL;
rjt_data.reason = ELS_RJT_LOGIC;
rjt_data.explan = ELS_EXPL_NONE;
@@ -302,7 +293,8 @@
mutex_unlock(&disc->disc_mutex);
break;
default:
- FC_DBG("Received an unsupported request. opcode (%x)\n", op);
+ FC_DISC_DBG(disc, "Received an unsupported request, "
+ "the opcode is (%x)\n", op);
break;
}
}
@@ -320,12 +312,10 @@
struct fc_rport_libfc_priv *rdata, *next;
struct fc_lport *lport = disc->lport;
- FC_DEBUG_DISC("Restarting discovery for port (%6x)\n",
- fc_host_port_id(lport->host));
+ FC_DISC_DBG(disc, "Restarting discovery\n");
list_for_each_entry_safe(rdata, next, &disc->rports, peers) {
rport = PRIV_TO_RPORT(rdata);
- FC_DEBUG_DISC("list_del(%6x)\n", rport->port_id);
list_del(&rdata->peers);
lport->tt.rport_logoff(rport);
}
@@ -485,8 +475,7 @@
struct fc_lport *lport = disc->lport;
enum fc_disc_event event;
- FC_DEBUG_DISC("Discovery complete for port (%6x)\n",
- fc_host_port_id(lport->host));
+ FC_DISC_DBG(disc, "Discovery complete\n");
event = disc->event;
disc->event = DISC_EV_NONE;
@@ -510,10 +499,10 @@
{
struct fc_lport *lport = disc->lport;
unsigned long delay = 0;
- if (fc_disc_debug)
- FC_DBG("Error %ld, retries %d/%d\n",
- PTR_ERR(fp), disc->retry_count,
- FC_DISC_RETRY_LIMIT);
+
+ FC_DISC_DBG(disc, "Error %ld, retries %d/%d\n",
+ PTR_ERR(fp), disc->retry_count,
+ FC_DISC_RETRY_LIMIT);
if (!fp || PTR_ERR(fp) == -FC_EX_TIMEOUT) {
/*
@@ -649,9 +638,9 @@
&disc->rogue_rports);
lport->tt.rport_login(rport);
} else
- FC_DBG("Failed to allocate memory for "
- "the newly discovered port (%6x)\n",
- dp.ids.port_id);
+ printk(KERN_WARNING "libfc: Failed to allocate "
+ "memory for the newly discovered port "
+ "(%6x)\n", dp.ids.port_id);
}
if (np->fp_flags & FC_NS_FID_LAST) {
@@ -671,9 +660,8 @@
*/
if (error == 0 && len > 0 && len < sizeof(*np)) {
if (np != &disc->partial_buf) {
- FC_DEBUG_DISC("Partial buffer remains "
- "for discovery by (%6x)\n",
- fc_host_port_id(lport->host));
+ FC_DISC_DBG(disc, "Partial buffer remains "
+ "for discovery\n");
memcpy(&disc->partial_buf, np, len);
}
disc->buf_len = (unsigned char) len;
@@ -721,8 +709,7 @@
int error;
mutex_lock(&disc->disc_mutex);
- FC_DEBUG_DISC("Received a GPN_FT response on port (%6x)\n",
- fc_host_port_id(disc->lport->host));
+ FC_DISC_DBG(disc, "Received a GPN_FT response\n");
if (IS_ERR(fp)) {
fc_disc_error(disc, fp);
@@ -738,30 +725,30 @@
disc->seq_count == 0) {
cp = fc_frame_payload_get(fp, sizeof(*cp));
if (!cp) {
- FC_DBG("GPN_FT response too short, len %d\n",
- fr_len(fp));
+ FC_DISC_DBG(disc, "GPN_FT response too short, len %d\n",
+ fr_len(fp));
} else if (ntohs(cp->ct_cmd) == FC_FS_ACC) {
/* Accepted, parse the response. */
buf = cp + 1;
len -= sizeof(*cp);
} else if (ntohs(cp->ct_cmd) == FC_FS_RJT) {
- FC_DBG("GPN_FT rejected reason %x exp %x "
- "(check zoning)\n", cp->ct_reason,
- cp->ct_explan);
+ FC_DISC_DBG(disc, "GPN_FT rejected reason %x exp %x "
+ "(check zoning)\n", cp->ct_reason,
+ cp->ct_explan);
disc->event = DISC_EV_FAILED;
fc_disc_done(disc);
} else {
- FC_DBG("GPN_FT unexpected response code %x\n",
- ntohs(cp->ct_cmd));
+ FC_DISC_DBG(disc, "GPN_FT unexpected response code "
+ "%x\n", ntohs(cp->ct_cmd));
}
} else if (fr_sof(fp) == FC_SOF_N3 &&
seq_cnt == disc->seq_count) {
buf = fh + 1;
} else {
- FC_DBG("GPN_FT unexpected frame - out of sequence? "
- "seq_cnt %x expected %x sof %x eof %x\n",
- seq_cnt, disc->seq_count, fr_sof(fp), fr_eof(fp));
+ FC_DISC_DBG(disc, "GPN_FT unexpected frame - out of sequence? "
+ "seq_cnt %x expected %x sof %x eof %x\n",
+ seq_cnt, disc->seq_count, fr_sof(fp), fr_eof(fp));
}
if (buf) {
error = fc_disc_gpn_ft_parse(disc, buf, len);
diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c
index 7af9bce..2bc22be 100644
--- a/drivers/scsi/libfc/fc_exch.c
+++ b/drivers/scsi/libfc/fc_exch.c
@@ -32,18 +32,7 @@
#include <scsi/libfc.h>
#include <scsi/fc_encode.h>
-/*
- * fc_exch_debug can be set in debugger or at compile time to get more logs.
- */
-static int fc_exch_debug;
-
-#define FC_DEBUG_EXCH(fmt...) \
- do { \
- if (fc_exch_debug) \
- FC_DBG(fmt); \
- } while (0)
-
-static struct kmem_cache *fc_em_cachep; /* cache for exchanges */
+static struct kmem_cache *fc_em_cachep; /* cache for exchanges */
/*
* Structure and function definitions for managing Fibre Channel Exchanges
@@ -333,8 +322,8 @@
if (ep->state & (FC_EX_RST_CLEANUP | FC_EX_DONE))
return;
- FC_DEBUG_EXCH("Exchange (%4x) timed out, notifying the upper layer\n",
- ep->xid);
+ FC_EXCH_DBG(ep, "Exchange timed out, notifying the upper layer\n");
+
if (schedule_delayed_work(&ep->timeout_work,
msecs_to_jiffies(timer_msec)))
fc_exch_hold(ep); /* hold for timer */
@@ -545,7 +534,7 @@
/* alloc a new xid */
xid = fc_em_alloc_xid(mp, fp);
if (!xid) {
- printk(KERN_ERR "fc_em_alloc_xid() failed\n");
+ printk(KERN_WARNING "libfc: Failed to allocate an exhange\n");
goto err;
}
}
@@ -820,8 +809,8 @@
struct fc_exch *ep = fc_seq_exch(sp);
sp = fc_seq_alloc(ep, ep->seq_id++);
- FC_DEBUG_EXCH("exch %4x f_ctl %6x seq %2x\n",
- ep->xid, ep->f_ctl, sp->id);
+ FC_EXCH_DBG(ep, "f_ctl %6x seq %2x\n",
+ ep->f_ctl, sp->id);
return sp;
}
/*
@@ -901,7 +890,7 @@
fc_exch_els_rec(sp, els_data->fp);
break;
default:
- FC_DBG("Invalid ELS CMD:%x\n", els_cmd);
+ FC_EXCH_DBG(fc_seq_exch(sp), "Invalid ELS CMD:%x\n", els_cmd);
}
}
EXPORT_SYMBOL(fc_seq_els_rsp_send);
@@ -1134,7 +1123,7 @@
lp->tt.lport_recv(lp, sp, fp);
fc_exch_release(ep); /* release from lookup */
} else {
- FC_DEBUG_EXCH("exch/seq lookup failed: reject %x\n", reject);
+ FC_EM_DBG(mp, "exch/seq lookup failed: reject %x\n", reject);
fc_frame_free(fp);
}
}
@@ -1242,10 +1231,10 @@
sp = fc_seq_lookup_orig(mp, fp); /* doesn't hold sequence */
if (!sp) {
atomic_inc(&mp->stats.xid_not_found);
- FC_DEBUG_EXCH("seq lookup failed\n");
+ FC_EM_DBG(mp, "seq lookup failed\n");
} else {
atomic_inc(&mp->stats.non_bls_resp);
- FC_DEBUG_EXCH("non-BLS response to sequence");
+ FC_EM_DBG(mp, "non-BLS response to sequence");
}
fc_frame_free(fp);
}
@@ -1266,8 +1255,8 @@
int rc = 1, has_rec = 0;
fh = fc_frame_header_get(fp);
- FC_DEBUG_EXCH("exch: BLS rctl %x - %s\n",
- fh->fh_r_ctl, fc_exch_rctl_name(fh->fh_r_ctl));
+ FC_EXCH_DBG(ep, "exch: BLS rctl %x - %s\n", fh->fh_r_ctl,
+ fc_exch_rctl_name(fh->fh_r_ctl));
if (cancel_delayed_work_sync(&ep->timeout_work))
fc_exch_release(ep); /* release from pending timer hold */
@@ -1359,9 +1348,9 @@
case FC_RCTL_ACK_0:
break;
default:
- FC_DEBUG_EXCH("BLS rctl %x - %s received",
- fh->fh_r_ctl,
- fc_exch_rctl_name(fh->fh_r_ctl));
+ FC_EXCH_DBG(ep, "BLS rctl %x - %s received",
+ fh->fh_r_ctl,
+ fc_exch_rctl_name(fh->fh_r_ctl));
break;
}
fc_frame_free(fp);
@@ -1599,7 +1588,8 @@
if (err == -FC_EX_CLOSED || err == -FC_EX_TIMEOUT)
goto cleanup;
- FC_DBG("Cannot process RRQ, because of frame error %d\n", err);
+ FC_EXCH_DBG(aborted_ep, "Cannot process RRQ, "
+ "frame error %d\n", err);
return;
}
@@ -1608,12 +1598,13 @@
switch (op) {
case ELS_LS_RJT:
- FC_DBG("LS_RJT for RRQ");
+ FC_EXCH_DBG(aborted_ep, "LS_RJT for RRQ");
/* fall through */
case ELS_LS_ACC:
goto cleanup;
default:
- FC_DBG("unexpected response op %x for RRQ", op);
+ FC_EXCH_DBG(aborted_ep, "unexpected response op %x "
+ "for RRQ", op);
return;
}
@@ -1740,8 +1731,8 @@
size_t len;
if (max_xid <= min_xid || min_xid == 0 || max_xid == FC_XID_UNKNOWN) {
- FC_DBG("Invalid min_xid 0x:%x and max_xid 0x:%x\n",
- min_xid, max_xid);
+ FC_LPORT_DBG(lp, "Invalid min_xid 0x:%x and max_xid 0x:%x\n",
+ min_xid, max_xid);
return NULL;
}
@@ -1878,7 +1869,8 @@
/* lport lock ? */
if (!lp || !mp || (lp->state == LPORT_ST_NONE)) {
- FC_DBG("fc_lport or EM is not allocated and configured");
+ FC_LPORT_DBG(lp, "Receiving frames for an lport that "
+ "has not been initialized correctly\n");
fc_frame_free(fp);
return;
}
@@ -1904,7 +1896,7 @@
fc_exch_recv_req(lp, mp, fp);
break;
default:
- FC_DBG("dropping invalid frame (eof %x)", fr_eof(fp));
+ FC_EM_DBG(mp, "dropping invalid frame (eof %x)", fr_eof(fp));
fc_frame_free(fp);
break;
}
diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c
index ad8b747..e303e0d 100644
--- a/drivers/scsi/libfc/fc_fcp.c
+++ b/drivers/scsi/libfc/fc_fcp.c
@@ -43,13 +43,9 @@
MODULE_DESCRIPTION("libfc");
MODULE_LICENSE("GPL v2");
-static int fc_fcp_debug;
-
-#define FC_DEBUG_FCP(fmt...) \
- do { \
- if (fc_fcp_debug) \
- FC_DBG(fmt); \
- } while (0)
+unsigned int fc_debug_logging;
+module_param_named(debug_logging, fc_debug_logging, int, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(debug_logging, "a bit mask of logging levels");
static struct kmem_cache *scsi_pkt_cachep;
@@ -347,8 +343,8 @@
if ((fr_flags(fp) & FCPHF_CRC_UNCHECKED) &&
fc_frame_crc_check(fp))
goto crc_err;
- FC_DEBUG_FCP("data received past end. len %zx offset %zx "
- "data_len %x\n", len, offset, fsp->data_len);
+ FC_FCP_DBG(fsp, "data received past end. len %zx offset %zx "
+ "data_len %x\n", len, offset, fsp->data_len);
fc_fcp_retry_cmd(fsp);
return;
}
@@ -411,7 +407,8 @@
stats->ErrorFrames++;
/* FIXME - per cpu count, not total count! */
if (stats->InvalidCRCCount++ < 5)
- printk(KERN_WARNING "CRC error on data frame for port (%6x)\n",
+ printk(KERN_WARNING "libfc: CRC error on data "
+ "frame for port (%6x)\n",
fc_host_port_id(lp->host));
/*
* Assume the frame is total garbage.
@@ -475,14 +472,14 @@
WARN_ON(seq_blen <= 0);
if (unlikely(offset + seq_blen > fsp->data_len)) {
/* this should never happen */
- FC_DEBUG_FCP("xfer-ready past end. seq_blen %zx offset %zx\n",
- seq_blen, offset);
+ FC_FCP_DBG(fsp, "xfer-ready past end. seq_blen %zx "
+ "offset %zx\n", seq_blen, offset);
fc_fcp_send_abort(fsp);
return 0;
} else if (offset != fsp->xfer_len) {
/* Out of Order Data Request - no problem, but unexpected. */
- FC_DEBUG_FCP("xfer-ready non-contiguous. "
- "seq_blen %zx offset %zx\n", seq_blen, offset);
+ FC_FCP_DBG(fsp, "xfer-ready non-contiguous. "
+ "seq_blen %zx offset %zx\n", seq_blen, offset);
}
/*
@@ -493,7 +490,7 @@
t_blen = fsp->max_payload;
if (lp->seq_offload) {
t_blen = min(seq_blen, (size_t)lp->lso_max);
- FC_DEBUG_FCP("fsp=%p:lso:blen=%zx lso_max=0x%x t_blen=%zx\n",
+ FC_FCP_DBG(fsp, "fsp=%p:lso:blen=%zx lso_max=0x%x t_blen=%zx\n",
fsp, seq_blen, lp->lso_max, t_blen);
}
@@ -694,7 +691,7 @@
if (!can_queue)
can_queue = 1;
lp->host->can_queue = can_queue;
- shost_printk(KERN_ERR, lp->host, "Could not allocate frame.\n"
+ shost_printk(KERN_ERR, lp->host, "libfc: Could not allocate frame.\n"
"Reducing can_queue to %d.\n", can_queue);
done:
spin_unlock_irqrestore(lp->host->host_lock, flags);
@@ -768,7 +765,7 @@
fc_fcp_resp(fsp, fp);
} else {
- FC_DBG("unexpected frame. r_ctl %x\n", r_ctl);
+ FC_FCP_DBG(fsp, "unexpected frame. r_ctl %x\n", r_ctl);
}
unlock:
fc_fcp_unlock_pkt(fsp);
@@ -877,17 +874,17 @@
return;
}
fsp->status_code = FC_DATA_OVRRUN;
- FC_DBG("tgt %6x xfer len %zx greater than expected len %x. "
- "data len %x\n",
- fsp->rport->port_id,
- fsp->xfer_len, expected_len, fsp->data_len);
+ FC_FCP_DBG(fsp, "tgt %6x xfer len %zx greater than expected, "
+ "len %x, data len %x\n",
+ fsp->rport->port_id,
+ fsp->xfer_len, expected_len, fsp->data_len);
}
fc_fcp_complete_locked(fsp);
return;
len_err:
- FC_DBG("short FCP response. flags 0x%x len %u respl %u snsl %u\n",
- flags, fr_len(fp), respl, snsl);
+ FC_FCP_DBG(fsp, "short FCP response. flags 0x%x len %u respl %u "
+ "snsl %u\n", flags, fr_len(fp), respl, snsl);
err:
fsp->status_code = FC_ERROR;
fc_fcp_complete_locked(fsp);
@@ -1107,13 +1104,11 @@
if (fc_fcp_lock_pkt(fsp))
return;
- switch (error) {
- case -FC_EX_CLOSED:
+ if (error == -FC_EX_CLOSED) {
fc_fcp_retry_cmd(fsp);
goto unlock;
- default:
- FC_DBG("unknown error %ld\n", PTR_ERR(fp));
}
+
/*
* clear abort pending, because the lower layer
* decided to force completion.
@@ -1145,10 +1140,10 @@
fsp->wait_for_comp = 0;
if (!rc) {
- FC_DBG("target abort cmd failed\n");
+ FC_FCP_DBG(fsp, "target abort cmd failed\n");
rc = FAILED;
} else if (fsp->state & FC_SRB_ABORTED) {
- FC_DBG("target abort cmd passed\n");
+ FC_FCP_DBG(fsp, "target abort cmd passed\n");
rc = SUCCESS;
fc_fcp_complete_locked(fsp);
}
@@ -1213,7 +1208,7 @@
spin_unlock_bh(&fsp->scsi_pkt_lock);
if (!rc) {
- FC_DBG("lun reset failed\n");
+ FC_SCSI_DBG(lp, "lun reset failed\n");
return FAILED;
}
@@ -1221,7 +1216,7 @@
if (fsp->cdb_status != FCP_TMF_CMPL)
return FAILED;
- FC_DBG("lun reset to lun %u completed\n", lun);
+ FC_SCSI_DBG(lp, "lun reset to lun %u completed\n", lun);
fc_fcp_cleanup_each_cmd(lp, id, lun, FC_CMD_ABORTED);
return SUCCESS;
}
@@ -1388,13 +1383,13 @@
rjt = fc_frame_payload_get(fp, sizeof(*rjt));
switch (rjt->er_reason) {
default:
- FC_DEBUG_FCP("device %x unexpected REC reject "
- "reason %d expl %d\n",
- fsp->rport->port_id, rjt->er_reason,
- rjt->er_explan);
+ FC_FCP_DBG(fsp, "device %x unexpected REC reject "
+ "reason %d expl %d\n",
+ fsp->rport->port_id, rjt->er_reason,
+ rjt->er_explan);
/* fall through */
case ELS_RJT_UNSUP:
- FC_DEBUG_FCP("device does not support REC\n");
+ FC_FCP_DBG(fsp, "device does not support REC\n");
rp = fsp->rport->dd_data;
/*
* if we do not spport RECs or got some bogus
@@ -1514,8 +1509,8 @@
break;
default:
- FC_DBG("REC %p fid %x error unexpected error %d\n",
- fsp, fsp->rport->port_id, error);
+ FC_FCP_DBG(fsp, "REC %p fid %x error unexpected error %d\n",
+ fsp, fsp->rport->port_id, error);
fsp->status_code = FC_CMD_PLOGO;
/* fall through */
@@ -1524,9 +1519,9 @@
* Assume REC or LS_ACC was lost.
* The exchange manager will have aborted REC, so retry.
*/
- FC_DBG("REC fid %x error error %d retry %d/%d\n",
- fsp->rport->port_id, error, fsp->recov_retry,
- FC_MAX_RECOV_RETRY);
+ FC_FCP_DBG(fsp, "REC fid %x error error %d retry %d/%d\n",
+ fsp->rport->port_id, error, fsp->recov_retry,
+ FC_MAX_RECOV_RETRY);
if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY)
fc_fcp_rec(fsp);
else
@@ -2011,9 +2006,11 @@
if (lp->state != LPORT_ST_READY)
return rc;
+ FC_SCSI_DBG(lp, "Resetting rport (%6x)\n", rport->port_id);
+
fsp = fc_fcp_pkt_alloc(lp, GFP_NOIO);
if (fsp == NULL) {
- FC_DBG("could not allocate scsi_pkt\n");
+ printk(KERN_WARNING "libfc: could not allocate scsi_pkt\n");
sc_cmd->result = DID_NO_CONNECT << 16;
goto out;
}
@@ -2048,17 +2045,21 @@
struct fc_lport *lp = shost_priv(shost);
unsigned long wait_tmo;
+ FC_SCSI_DBG(lp, "Resetting host\n");
+
lp->tt.lport_reset(lp);
wait_tmo = jiffies + FC_HOST_RESET_TIMEOUT;
while (!fc_fcp_lport_queue_ready(lp) && time_before(jiffies, wait_tmo))
msleep(1000);
if (fc_fcp_lport_queue_ready(lp)) {
- shost_printk(KERN_INFO, shost, "Host reset succeeded.\n");
+ shost_printk(KERN_INFO, shost, "libfc: Host reset succeeded "
+ "on port (%6x)\n", fc_host_port_id(lp->host));
return SUCCESS;
} else {
- shost_printk(KERN_INFO, shost, "Host reset failed. "
- "lport not ready.\n");
+ shost_printk(KERN_INFO, shost, "libfc: Host reset failed, "
+ "port (%6x) is not ready.\n",
+ fc_host_port_id(lp->host));
return FAILED;
}
}
@@ -2117,7 +2118,8 @@
struct fc_fcp_internal *si = fc_get_scsi_internal(lp);
if (!list_empty(&si->scsi_pkt_queue))
- printk(KERN_ERR "Leaked scsi packets.\n");
+ printk(KERN_ERR "libfc: Leaked SCSI packets when destroying "
+ "port (%6x)\n", fc_host_port_id(lp->host));
mempool_destroy(si->scsi_pkt_pool);
kfree(si);
@@ -2166,7 +2168,8 @@
sizeof(struct fc_fcp_pkt),
0, SLAB_HWCACHE_ALIGN, NULL);
if (scsi_pkt_cachep == NULL) {
- FC_DBG("Unable to allocate SRB cache...module load failed!");
+ printk(KERN_ERR "libfc: Unable to allocate SRB cache, "
+ "module load failed!");
return -ENOMEM;
}
diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c
index e0c2477..745fa55 100644
--- a/drivers/scsi/libfc/fc_lport.c
+++ b/drivers/scsi/libfc/fc_lport.c
@@ -101,14 +101,6 @@
#define DNS_DELAY 3 /* Discovery delay after RSCN (in seconds)*/
-static int fc_lport_debug;
-
-#define FC_DEBUG_LPORT(fmt...) \
- do { \
- if (fc_lport_debug) \
- FC_DBG(fmt); \
- } while (0)
-
static void fc_lport_error(struct fc_lport *, struct fc_frame *);
static void fc_lport_enter_reset(struct fc_lport *);
@@ -151,8 +143,8 @@
struct fc_rport *rport,
enum fc_rport_event event)
{
- FC_DEBUG_LPORT("Received a %d event for port (%6x)\n", event,
- rport->port_id);
+ FC_LPORT_DBG(lport, "Received a %d event for port (%6x)\n", event,
+ rport->port_id);
switch (event) {
case RPORT_EV_CREATED:
@@ -162,19 +154,19 @@
lport->dns_rp = rport;
fc_lport_enter_rpn_id(lport);
} else {
- FC_DEBUG_LPORT("Received an CREATED event on "
- "port (%6x) for the directory "
- "server, but the lport is not "
- "in the DNS state, it's in the "
- "%d state", rport->port_id,
- lport->state);
+ FC_LPORT_DBG(lport, "Received an CREATED event "
+ "on port (%6x) for the directory "
+ "server, but the lport is not "
+ "in the DNS state, it's in the "
+ "%d state", rport->port_id,
+ lport->state);
lport->tt.rport_logoff(rport);
}
mutex_unlock(&lport->lp_mutex);
} else
- FC_DEBUG_LPORT("Received an event for port (%6x) "
- "which is not the directory server\n",
- rport->port_id);
+ FC_LPORT_DBG(lport, "Received an event for port (%6x) "
+ "which is not the directory server\n",
+ rport->port_id);
break;
case RPORT_EV_LOGO:
case RPORT_EV_FAILED:
@@ -185,9 +177,9 @@
mutex_unlock(&lport->lp_mutex);
} else
- FC_DEBUG_LPORT("Received an event for port (%6x) "
- "which is not the directory server\n",
- rport->port_id);
+ FC_LPORT_DBG(lport, "Received an event for port (%6x) "
+ "which is not the directory server\n",
+ rport->port_id);
break;
case RPORT_EV_NONE:
break;
@@ -363,8 +355,8 @@
static void fc_lport_recv_rlir_req(struct fc_seq *sp, struct fc_frame *fp,
struct fc_lport *lport)
{
- FC_DEBUG_LPORT("Received RLIR request while in state %s\n",
- fc_lport_state(lport));
+ FC_LPORT_DBG(lport, "Received RLIR request while in state %s\n",
+ fc_lport_state(lport));
lport->tt.seq_els_rsp_send(sp, ELS_LS_ACC, NULL);
fc_frame_free(fp);
@@ -389,8 +381,8 @@
void *dp;
u32 f_ctl;
- FC_DEBUG_LPORT("Received RLIR request while in state %s\n",
- fc_lport_state(lport));
+ FC_LPORT_DBG(lport, "Received RLIR request while in state %s\n",
+ fc_lport_state(lport));
len = fr_len(in_fp) - sizeof(struct fc_frame_header);
pp = fc_frame_payload_get(in_fp, len);
@@ -437,8 +429,8 @@
size_t len;
u32 f_ctl;
- FC_DEBUG_LPORT("Received RNID request while in state %s\n",
- fc_lport_state(lport));
+ FC_LPORT_DBG(lport, "Received RNID request while in state %s\n",
+ fc_lport_state(lport));
req = fc_frame_payload_get(in_fp, sizeof(*req));
if (!req) {
@@ -498,8 +490,8 @@
size_t len;
u32 f_ctl;
- FC_DEBUG_LPORT("Received ADISC request while in state %s\n",
- fc_lport_state(lport));
+ FC_LPORT_DBG(lport, "Received ADISC request while in state %s\n",
+ fc_lport_state(lport));
req = fc_frame_payload_get(in_fp, sizeof(*req));
if (!req) {
@@ -574,8 +566,8 @@
*/
void fc_linkup(struct fc_lport *lport)
{
- FC_DEBUG_LPORT("Link is up for port (%6x)\n",
- fc_host_port_id(lport->host));
+ printk(KERN_INFO "libfc: Link up on port (%6x)\n",
+ fc_host_port_id(lport->host));
mutex_lock(&lport->lp_mutex);
if (!lport->link_up) {
@@ -595,8 +587,8 @@
void fc_linkdown(struct fc_lport *lport)
{
mutex_lock(&lport->lp_mutex);
- FC_DEBUG_LPORT("Link is down for port (%6x)\n",
- fc_host_port_id(lport->host));
+ printk(KERN_INFO "libfc: Link down on port (%6x)\n",
+ fc_host_port_id(lport->host));
if (lport->link_up) {
lport->link_up = 0;
@@ -701,12 +693,11 @@
{
switch (event) {
case DISC_EV_SUCCESS:
- FC_DEBUG_LPORT("Got a SUCCESS event for port (%6x)\n",
- fc_host_port_id(lport->host));
+ FC_LPORT_DBG(lport, "Discovery succeeded\n");
break;
case DISC_EV_FAILED:
- FC_DEBUG_LPORT("Got a FAILED event for port (%6x)\n",
- fc_host_port_id(lport->host));
+ printk(KERN_ERR "libfc: Discovery failed for port (%6x)\n",
+ fc_host_port_id(lport->host));
mutex_lock(&lport->lp_mutex);
fc_lport_enter_reset(lport);
mutex_unlock(&lport->lp_mutex);
@@ -726,8 +717,8 @@
*/
static void fc_lport_enter_ready(struct fc_lport *lport)
{
- FC_DEBUG_LPORT("Port (%6x) entered Ready from state %s\n",
- fc_host_port_id(lport->host), fc_lport_state(lport));
+ FC_LPORT_DBG(lport, "Entered READY from state %s\n",
+ fc_lport_state(lport));
fc_lport_state_enter(lport, LPORT_ST_READY);
@@ -762,8 +753,8 @@
u32 local_fid;
u32 f_ctl;
- FC_DEBUG_LPORT("Received FLOGI request while in state %s\n",
- fc_lport_state(lport));
+ FC_LPORT_DBG(lport, "Received FLOGI request while in state %s\n",
+ fc_lport_state(lport));
fh = fc_frame_header_get(rx_fp);
remote_fid = ntoh24(fh->fh_s_id);
@@ -772,12 +763,11 @@
goto out;
remote_wwpn = get_unaligned_be64(&flp->fl_wwpn);
if (remote_wwpn == lport->wwpn) {
- FC_DBG("FLOGI from port with same WWPN %llx "
- "possible configuration error\n",
- (unsigned long long)remote_wwpn);
+ printk(KERN_WARNING "libfc: Received FLOGI from port "
+ "with same WWPN %llx\n", remote_wwpn);
goto out;
}
- FC_DBG("FLOGI from port WWPN %llx\n", (unsigned long long)remote_wwpn);
+ FC_LPORT_DBG(lport, "FLOGI from port WWPN %llx\n", remote_wwpn);
/*
* XXX what is the right thing to do for FIDs?
@@ -909,7 +899,8 @@
}
}
} else {
- FC_DBG("dropping invalid frame (eof %x)\n", fr_eof(fp));
+ FC_LPORT_DBG(lport, "dropping invalid frame (eof %x)\n",
+ fr_eof(fp));
fc_frame_free(fp);
}
mutex_unlock(&lport->lp_mutex);
@@ -947,8 +938,8 @@
*/
static void fc_lport_enter_reset(struct fc_lport *lport)
{
- FC_DEBUG_LPORT("Port (%6x) entered RESET state from %s state\n",
- fc_host_port_id(lport->host), fc_lport_state(lport));
+ FC_LPORT_DBG(lport, "Entered RESET state from %s state\n",
+ fc_lport_state(lport));
fc_lport_state_enter(lport, LPORT_ST_RESET);
@@ -982,9 +973,9 @@
static void fc_lport_error(struct fc_lport *lport, struct fc_frame *fp)
{
unsigned long delay = 0;
- FC_DEBUG_LPORT("Error %ld in state %s, retries %d\n",
- PTR_ERR(fp), fc_lport_state(lport),
- lport->retry_count);
+ FC_LPORT_DBG(lport, "Error %ld in state %s, retries %d\n",
+ PTR_ERR(fp), fc_lport_state(lport),
+ lport->retry_count);
if (!fp || PTR_ERR(fp) == -FC_EX_TIMEOUT) {
/*
@@ -1040,11 +1031,11 @@
mutex_lock(&lport->lp_mutex);
- FC_DEBUG_LPORT("Received a RFT_ID response\n");
+ FC_LPORT_DBG(lport, "Received a RFT_ID response\n");
if (lport->state != LPORT_ST_RFT_ID) {
- FC_DBG("Received a RFT_ID response, but in state %s\n",
- fc_lport_state(lport));
+ FC_LPORT_DBG(lport, "Received a RFT_ID response, but in state "
+ "%s\n", fc_lport_state(lport));
if (IS_ERR(fp))
goto err;
goto out;
@@ -1094,11 +1085,11 @@
mutex_lock(&lport->lp_mutex);
- FC_DEBUG_LPORT("Received a RPN_ID response\n");
+ FC_LPORT_DBG(lport, "Received a RPN_ID response\n");
if (lport->state != LPORT_ST_RPN_ID) {
- FC_DBG("Received a RPN_ID response, but in state %s\n",
- fc_lport_state(lport));
+ FC_LPORT_DBG(lport, "Received a RPN_ID response, but in state "
+ "%s\n", fc_lport_state(lport));
if (IS_ERR(fp))
goto err;
goto out;
@@ -1146,11 +1137,11 @@
mutex_lock(&lport->lp_mutex);
- FC_DEBUG_LPORT("Received a SCR response\n");
+ FC_LPORT_DBG(lport, "Received a SCR response\n");
if (lport->state != LPORT_ST_SCR) {
- FC_DBG("Received a SCR response, but in state %s\n",
- fc_lport_state(lport));
+ FC_LPORT_DBG(lport, "Received a SCR response, but in state "
+ "%s\n", fc_lport_state(lport));
if (IS_ERR(fp))
goto err;
goto out;
@@ -1184,8 +1175,8 @@
{
struct fc_frame *fp;
- FC_DEBUG_LPORT("Port (%6x) entered SCR state from %s state\n",
- fc_host_port_id(lport->host), fc_lport_state(lport));
+ FC_LPORT_DBG(lport, "Entered SCR state from %s state\n",
+ fc_lport_state(lport));
fc_lport_state_enter(lport, LPORT_ST_SCR);
@@ -1213,8 +1204,8 @@
struct fc_ns_fts *lps;
int i;
- FC_DEBUG_LPORT("Port (%6x) entered RFT_ID state from %s state\n",
- fc_host_port_id(lport->host), fc_lport_state(lport));
+ FC_LPORT_DBG(lport, "Entered RFT_ID state from %s state\n",
+ fc_lport_state(lport));
fc_lport_state_enter(lport, LPORT_ST_RFT_ID);
@@ -1253,8 +1244,8 @@
{
struct fc_frame *fp;
- FC_DEBUG_LPORT("Port (%6x) entered RPN_ID state from %s state\n",
- fc_host_port_id(lport->host), fc_lport_state(lport));
+ FC_LPORT_DBG(lport, "Entered RPN_ID state from %s state\n",
+ fc_lport_state(lport));
fc_lport_state_enter(lport, LPORT_ST_RPN_ID);
@@ -1294,8 +1285,8 @@
dp.ids.roles = FC_RPORT_ROLE_UNKNOWN;
dp.lp = lport;
- FC_DEBUG_LPORT("Port (%6x) entered DNS state from %s state\n",
- fc_host_port_id(lport->host), fc_lport_state(lport));
+ FC_LPORT_DBG(lport, "Entered DNS state from %s state\n",
+ fc_lport_state(lport));
fc_lport_state_enter(lport, LPORT_ST_DNS);
@@ -1374,11 +1365,11 @@
mutex_lock(&lport->lp_mutex);
- FC_DEBUG_LPORT("Received a LOGO response\n");
+ FC_LPORT_DBG(lport, "Received a LOGO response\n");
if (lport->state != LPORT_ST_LOGO) {
- FC_DBG("Received a LOGO response, but in state %s\n",
- fc_lport_state(lport));
+ FC_LPORT_DBG(lport, "Received a LOGO response, but in state "
+ "%s\n", fc_lport_state(lport));
if (IS_ERR(fp))
goto err;
goto out;
@@ -1413,8 +1404,8 @@
struct fc_frame *fp;
struct fc_els_logo *logo;
- FC_DEBUG_LPORT("Port (%6x) entered LOGO state from %s state\n",
- fc_host_port_id(lport->host), fc_lport_state(lport));
+ FC_LPORT_DBG(lport, "Entered LOGO state from %s state\n",
+ fc_lport_state(lport));
fc_lport_state_enter(lport, LPORT_ST_LOGO);
@@ -1456,11 +1447,11 @@
mutex_lock(&lport->lp_mutex);
- FC_DEBUG_LPORT("Received a FLOGI response\n");
+ FC_LPORT_DBG(lport, "Received a FLOGI response\n");
if (lport->state != LPORT_ST_FLOGI) {
- FC_DBG("Received a FLOGI response, but in state %s\n",
- fc_lport_state(lport));
+ FC_LPORT_DBG(lport, "Received a FLOGI response, but in state "
+ "%s\n", fc_lport_state(lport));
if (IS_ERR(fp))
goto err;
goto out;
@@ -1475,7 +1466,8 @@
did = ntoh24(fh->fh_d_id);
if (fc_frame_payload_op(fp) == ELS_LS_ACC && did != 0) {
- FC_DEBUG_LPORT("Assigned fid %x\n", did);
+ printk(KERN_INFO "libfc: Assigned FID (%6x) in FLOGI response\n",
+ did);
fc_host_port_id(lport->host) = did;
flp = fc_frame_payload_get(fp, sizeof(*flp));
@@ -1494,7 +1486,8 @@
if (e_d_tov > lport->e_d_tov)
lport->e_d_tov = e_d_tov;
lport->r_a_tov = 2 * e_d_tov;
- FC_DBG("Point-to-Point mode\n");
+ printk(KERN_INFO "libfc: Port (%6x) entered "
+ "point to point mode\n", did);
fc_lport_ptp_setup(lport, ntoh24(fh->fh_s_id),
get_unaligned_be64(
&flp->fl_wwpn),
@@ -1517,7 +1510,7 @@
}
}
} else {
- FC_DBG("bad FLOGI response\n");
+ FC_LPORT_DBG(lport, "Bad FLOGI response\n");
}
out:
@@ -1537,7 +1530,8 @@
{
struct fc_frame *fp;
- FC_DEBUG_LPORT("Processing FLOGI state\n");
+ FC_LPORT_DBG(lport, "Entered FLOGI state from %s state\n",
+ fc_lport_state(lport));
fc_lport_state_enter(lport, LPORT_ST_FLOGI);
diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c
index 7bfbff7..7162385f 100644
--- a/drivers/scsi/libfc/fc_rport.c
+++ b/drivers/scsi/libfc/fc_rport.c
@@ -55,14 +55,6 @@
#include <scsi/libfc.h>
#include <scsi/fc_encode.h>
-static int fc_rport_debug;
-
-#define FC_DEBUG_RPORT(fmt...) \
- do { \
- if (fc_rport_debug) \
- FC_DBG(fmt); \
- } while (0)
-
struct workqueue_struct *rport_event_queue;
static void fc_rport_enter_plogi(struct fc_rport *);
@@ -97,7 +89,7 @@
static void fc_rport_rogue_destroy(struct device *dev)
{
struct fc_rport *rport = dev_to_rport(dev);
- FC_DEBUG_RPORT("Destroying rogue rport (%6x)\n", rport->port_id);
+ FC_RPORT_DBG(rport, "Destroying rogue rport\n");
kfree(rport);
}
@@ -263,8 +255,8 @@
fc_rport_state_enter(new_rport, RPORT_ST_READY);
} else {
- FC_DBG("Failed to create the rport for port "
- "(%6x).\n", ids.port_id);
+ printk(KERN_WARNING "libfc: Failed to allocate "
+ " memory for rport (%6x)\n", ids.port_id);
event = RPORT_EV_FAILED;
}
if (rport->port_id != FC_FID_DIR_SERV)
@@ -309,7 +301,7 @@
mutex_lock(&rdata->rp_mutex);
- FC_DEBUG_RPORT("Login to port (%6x)\n", rport->port_id);
+ FC_RPORT_DBG(rport, "Login to port\n");
fc_rport_enter_plogi(rport);
@@ -329,16 +321,13 @@
int fc_rport_logoff(struct fc_rport *rport)
{
struct fc_rport_libfc_priv *rdata = rport->dd_data;
- struct fc_lport *lport = rdata->local_port;
mutex_lock(&rdata->rp_mutex);
- FC_DEBUG_RPORT("Remove port (%6x)\n", rport->port_id);
+ FC_RPORT_DBG(rport, "Remove port\n");
if (rdata->rp_state == RPORT_ST_NONE) {
- FC_DEBUG_RPORT("(%6x): Port (%6x) in NONE state,"
- " not removing", fc_host_port_id(lport->host),
- rport->port_id);
+ FC_RPORT_DBG(rport, "Port in NONE state, not removing\n");
mutex_unlock(&rdata->rp_mutex);
goto out;
}
@@ -379,7 +368,7 @@
fc_rport_state_enter(rport, RPORT_ST_READY);
- FC_DEBUG_RPORT("Port (%6x) is Ready\n", rport->port_id);
+ FC_RPORT_DBG(rport, "Port is Ready\n");
rdata->event = RPORT_EV_CREATED;
queue_work(rport_event_queue, &rdata->event_work);
@@ -436,8 +425,8 @@
{
struct fc_rport_libfc_priv *rdata = rport->dd_data;
- FC_DEBUG_RPORT("Error %ld in state %s, retries %d\n",
- PTR_ERR(fp), fc_rport_state(rport), rdata->retries);
+ FC_RPORT_DBG(rport, "Error %ld in state %s, retries %d\n",
+ PTR_ERR(fp), fc_rport_state(rport), rdata->retries);
switch (rdata->rp_state) {
case RPORT_ST_PLOGI:
@@ -479,8 +468,8 @@
return fc_rport_error(rport, fp);
if (rdata->retries < rdata->local_port->max_rport_retry_count) {
- FC_DEBUG_RPORT("Error %ld in state %s, retrying\n",
- PTR_ERR(fp), fc_rport_state(rport));
+ FC_RPORT_DBG(rport, "Error %ld in state %s, retrying\n",
+ PTR_ERR(fp), fc_rport_state(rport));
rdata->retries++;
/* no additional delay on exchange timeouts */
if (PTR_ERR(fp) == -FC_EX_TIMEOUT)
@@ -517,12 +506,11 @@
mutex_lock(&rdata->rp_mutex);
- FC_DEBUG_RPORT("Received a PLOGI response from port (%6x)\n",
- rport->port_id);
+ FC_RPORT_DBG(rport, "Received a PLOGI response\n");
if (rdata->rp_state != RPORT_ST_PLOGI) {
- FC_DBG("Received a PLOGI response, but in state %s\n",
- fc_rport_state(rport));
+ FC_RPORT_DBG(rport, "Received a PLOGI response, but in state "
+ "%s\n", fc_rport_state(rport));
if (IS_ERR(fp))
goto err;
goto out;
@@ -583,8 +571,8 @@
struct fc_lport *lport = rdata->local_port;
struct fc_frame *fp;
- FC_DEBUG_RPORT("Port (%6x) entered PLOGI state from %s state\n",
- rport->port_id, fc_rport_state(rport));
+ FC_RPORT_DBG(rport, "Port entered PLOGI state from %s state\n",
+ fc_rport_state(rport));
fc_rport_state_enter(rport, RPORT_ST_PLOGI);
@@ -628,12 +616,11 @@
mutex_lock(&rdata->rp_mutex);
- FC_DEBUG_RPORT("Received a PRLI response from port (%6x)\n",
- rport->port_id);
+ FC_RPORT_DBG(rport, "Received a PRLI response\n");
if (rdata->rp_state != RPORT_ST_PRLI) {
- FC_DBG("Received a PRLI response, but in state %s\n",
- fc_rport_state(rport));
+ FC_RPORT_DBG(rport, "Received a PRLI response, but in state "
+ "%s\n", fc_rport_state(rport));
if (IS_ERR(fp))
goto err;
goto out;
@@ -663,7 +650,7 @@
fc_rport_enter_rtv(rport);
} else {
- FC_DBG("Bad ELS response\n");
+ FC_RPORT_DBG(rport, "Bad ELS response for PRLI command\n");
rdata->event = RPORT_EV_FAILED;
fc_rport_state_enter(rport, RPORT_ST_NONE);
queue_work(rport_event_queue, &rdata->event_work);
@@ -695,12 +682,11 @@
mutex_lock(&rdata->rp_mutex);
- FC_DEBUG_RPORT("Received a LOGO response from port (%6x)\n",
- rport->port_id);
+ FC_RPORT_DBG(rport, "Received a LOGO response\n");
if (rdata->rp_state != RPORT_ST_LOGO) {
- FC_DEBUG_RPORT("Received a LOGO response, but in state %s\n",
- fc_rport_state(rport));
+ FC_RPORT_DBG(rport, "Received a LOGO response, but in state "
+ "%s\n", fc_rport_state(rport));
if (IS_ERR(fp))
goto err;
goto out;
@@ -715,7 +701,7 @@
if (op == ELS_LS_ACC) {
fc_rport_enter_rtv(rport);
} else {
- FC_DBG("Bad ELS response\n");
+ FC_RPORT_DBG(rport, "Bad ELS response for LOGO command\n");
rdata->event = RPORT_EV_LOGO;
fc_rport_state_enter(rport, RPORT_ST_NONE);
queue_work(rport_event_queue, &rdata->event_work);
@@ -745,8 +731,8 @@
} *pp;
struct fc_frame *fp;
- FC_DEBUG_RPORT("Port (%6x) entered PRLI state from %s state\n",
- rport->port_id, fc_rport_state(rport));
+ FC_RPORT_DBG(rport, "Port entered PRLI state from %s state\n",
+ fc_rport_state(rport));
fc_rport_state_enter(rport, RPORT_ST_PRLI);
@@ -784,12 +770,11 @@
mutex_lock(&rdata->rp_mutex);
- FC_DEBUG_RPORT("Received a RTV response from port (%6x)\n",
- rport->port_id);
+ FC_RPORT_DBG(rport, "Received a RTV response\n");
if (rdata->rp_state != RPORT_ST_RTV) {
- FC_DBG("Received a RTV response, but in state %s\n",
- fc_rport_state(rport));
+ FC_RPORT_DBG(rport, "Received a RTV response, but in state "
+ "%s\n", fc_rport_state(rport));
if (IS_ERR(fp))
goto err;
goto out;
@@ -844,8 +829,8 @@
struct fc_rport_libfc_priv *rdata = rport->dd_data;
struct fc_lport *lport = rdata->local_port;
- FC_DEBUG_RPORT("Port (%6x) entered RTV state from %s state\n",
- rport->port_id, fc_rport_state(rport));
+ FC_RPORT_DBG(rport, "Port entered RTV state from %s state\n",
+ fc_rport_state(rport));
fc_rport_state_enter(rport, RPORT_ST_RTV);
@@ -875,8 +860,8 @@
struct fc_lport *lport = rdata->local_port;
struct fc_frame *fp;
- FC_DEBUG_RPORT("Port (%6x) entered LOGO state from %s state\n",
- rport->port_id, fc_rport_state(rport));
+ FC_RPORT_DBG(rport, "Port entered LOGO state from %s state\n",
+ fc_rport_state(rport));
fc_rport_state_enter(rport, RPORT_ST_LOGO);
@@ -983,14 +968,13 @@
fh = fc_frame_header_get(fp);
- FC_DEBUG_RPORT("Received PLOGI request from port (%6x) "
- "while in state %s\n", ntoh24(fh->fh_s_id),
- fc_rport_state(rport));
+ FC_RPORT_DBG(rport, "Received PLOGI request while in state %s\n",
+ fc_rport_state(rport));
sid = ntoh24(fh->fh_s_id);
pl = fc_frame_payload_get(fp, sizeof(*pl));
if (!pl) {
- FC_DBG("incoming PLOGI from %x too short\n", sid);
+ FC_RPORT_DBG(rport, "Received PLOGI too short\n");
WARN_ON(1);
/* XXX TBD: send reject? */
fc_frame_free(fp);
@@ -1012,26 +996,26 @@
*/
switch (rdata->rp_state) {
case RPORT_ST_INIT:
- FC_DEBUG_RPORT("incoming PLOGI from %6x wwpn %llx state INIT "
- "- reject\n", sid, (unsigned long long)wwpn);
+ FC_RPORT_DBG(rport, "Received PLOGI, wwpn %llx state INIT "
+ "- reject\n", (unsigned long long)wwpn);
reject = ELS_RJT_UNSUP;
break;
case RPORT_ST_PLOGI:
- FC_DEBUG_RPORT("incoming PLOGI from %x in PLOGI state %d\n",
- sid, rdata->rp_state);
+ FC_RPORT_DBG(rport, "Received PLOGI in PLOGI state %d\n",
+ rdata->rp_state);
if (wwpn < lport->wwpn)
reject = ELS_RJT_INPROG;
break;
case RPORT_ST_PRLI:
case RPORT_ST_READY:
- FC_DEBUG_RPORT("incoming PLOGI from %x in logged-in state %d "
- "- ignored for now\n", sid, rdata->rp_state);
+ FC_RPORT_DBG(rport, "Received PLOGI in logged-in state %d "
+ "- ignored for now\n", rdata->rp_state);
/* XXX TBD - should reset */
break;
case RPORT_ST_NONE:
default:
- FC_DEBUG_RPORT("incoming PLOGI from %x in unexpected "
- "state %d\n", sid, rdata->rp_state);
+ FC_RPORT_DBG(rport, "Received PLOGI in unexpected "
+ "state %d\n", rdata->rp_state);
fc_frame_free(fp);
return;
break;
@@ -1115,9 +1099,8 @@
fh = fc_frame_header_get(rx_fp);
- FC_DEBUG_RPORT("Received PRLI request from port (%6x) "
- "while in state %s\n", ntoh24(fh->fh_s_id),
- fc_rport_state(rport));
+ FC_RPORT_DBG(rport, "Received PRLI request while in state %s\n",
+ fc_rport_state(rport));
switch (rdata->rp_state) {
case RPORT_ST_PRLI:
@@ -1252,9 +1235,8 @@
fh = fc_frame_header_get(fp);
- FC_DEBUG_RPORT("Received PRLO request from port (%6x) "
- "while in state %s\n", ntoh24(fh->fh_s_id),
- fc_rport_state(rport));
+ FC_RPORT_DBG(rport, "Received PRLO request while in state %s\n",
+ fc_rport_state(rport));
if (rdata->rp_state == RPORT_ST_NONE) {
fc_frame_free(fp);
@@ -1286,9 +1268,8 @@
fh = fc_frame_header_get(fp);
- FC_DEBUG_RPORT("Received LOGO request from port (%6x) "
- "while in state %s\n", ntoh24(fh->fh_s_id),
- fc_rport_state(rport));
+ FC_RPORT_DBG(rport, "Received LOGO request while in state %s\n",
+ fc_rport_state(rport));
if (rdata->rp_state == RPORT_ST_NONE) {
fc_frame_free(fp);
@@ -1308,7 +1289,6 @@
flush_workqueue(rport_event_queue);
}
-
int fc_rport_init(struct fc_lport *lport)
{
if (!lport->tt.rport_create)
diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c
index 59908ae..716cc34 100644
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -38,15 +38,30 @@
#include <scsi/scsi_transport_iscsi.h>
#include <scsi/libiscsi.h>
-static int iscsi_dbg_lib;
-module_param_named(debug_libiscsi, iscsi_dbg_lib, int, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(debug_libiscsi, "Turn on debugging for libiscsi module. "
- "Set to 1 to turn on, and zero to turn off. Default "
- "is off.");
+static int iscsi_dbg_lib_conn;
+module_param_named(debug_libiscsi_conn, iscsi_dbg_lib_conn, int,
+ S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug_libiscsi_conn,
+ "Turn on debugging for connections in libiscsi module. "
+ "Set to 1 to turn on, and zero to turn off. Default is off.");
+
+static int iscsi_dbg_lib_session;
+module_param_named(debug_libiscsi_session, iscsi_dbg_lib_session, int,
+ S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug_libiscsi_session,
+ "Turn on debugging for sessions in libiscsi module. "
+ "Set to 1 to turn on, and zero to turn off. Default is off.");
+
+static int iscsi_dbg_lib_eh;
+module_param_named(debug_libiscsi_eh, iscsi_dbg_lib_eh, int,
+ S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug_libiscsi_eh,
+ "Turn on debugging for error handling in libiscsi module. "
+ "Set to 1 to turn on, and zero to turn off. Default is off.");
#define ISCSI_DBG_CONN(_conn, dbg_fmt, arg...) \
do { \
- if (iscsi_dbg_lib) \
+ if (iscsi_dbg_lib_conn) \
iscsi_conn_printk(KERN_INFO, _conn, \
"%s " dbg_fmt, \
__func__, ##arg); \
@@ -54,7 +69,15 @@
#define ISCSI_DBG_SESSION(_session, dbg_fmt, arg...) \
do { \
- if (iscsi_dbg_lib) \
+ if (iscsi_dbg_lib_session) \
+ iscsi_session_printk(KERN_INFO, _session, \
+ "%s " dbg_fmt, \
+ __func__, ##arg); \
+ } while (0);
+
+#define ISCSI_DBG_EH(_session, dbg_fmt, arg...) \
+ do { \
+ if (iscsi_dbg_lib_eh) \
iscsi_session_printk(KERN_INFO, _session, \
"%s " dbg_fmt, \
__func__, ##arg); \
@@ -954,6 +977,7 @@
task = iscsi_itt_to_ctask(conn, hdr->itt);
if (!task)
return ISCSI_ERR_BAD_ITT;
+ task->last_xfer = jiffies;
break;
case ISCSI_OP_R2T:
/*
@@ -1192,10 +1216,12 @@
spin_unlock_bh(&conn->session->lock);
rc = conn->session->tt->xmit_task(task);
spin_lock_bh(&conn->session->lock);
- __iscsi_put_task(task);
- if (!rc)
+ if (!rc) {
/* done with this task */
+ task->last_xfer = jiffies;
conn->task = NULL;
+ }
+ __iscsi_put_task(task);
return rc;
}
@@ -1361,6 +1387,9 @@
task->state = ISCSI_TASK_PENDING;
task->conn = conn;
task->sc = sc;
+ task->have_checked_conn = false;
+ task->last_timeout = jiffies;
+ task->last_xfer = jiffies;
INIT_LIST_HEAD(&task->running);
return task;
}
@@ -1555,10 +1584,10 @@
spin_lock_bh(&session->lock);
if (session->state == ISCSI_STATE_TERMINATE) {
failed:
- iscsi_session_printk(KERN_INFO, session,
- "failing target reset: Could not log "
- "back into target [age %d]\n",
- session->age);
+ ISCSI_DBG_EH(session,
+ "failing target reset: Could not log back into "
+ "target [age %d]\n",
+ session->age);
spin_unlock_bh(&session->lock);
mutex_unlock(&session->eh_mutex);
return FAILED;
@@ -1572,7 +1601,7 @@
*/
iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED);
- ISCSI_DBG_SESSION(session, "wait for relogin\n");
+ ISCSI_DBG_EH(session, "wait for relogin\n");
wait_event_interruptible(conn->ehwait,
session->state == ISCSI_STATE_TERMINATE ||
session->state == ISCSI_STATE_LOGGED_IN ||
@@ -1582,10 +1611,10 @@
mutex_lock(&session->eh_mutex);
spin_lock_bh(&session->lock);
- if (session->state == ISCSI_STATE_LOGGED_IN)
- iscsi_session_printk(KERN_INFO, session,
- "target reset succeeded\n");
- else
+ if (session->state == ISCSI_STATE_LOGGED_IN) {
+ ISCSI_DBG_EH(session,
+ "target reset succeeded\n");
+ } else
goto failed;
spin_unlock_bh(&session->lock);
mutex_unlock(&session->eh_mutex);
@@ -1601,7 +1630,7 @@
spin_lock(&session->lock);
if (conn->tmf_state == TMF_QUEUED) {
conn->tmf_state = TMF_TIMEDOUT;
- ISCSI_DBG_SESSION(session, "tmf timedout\n");
+ ISCSI_DBG_EH(session, "tmf timedout\n");
/* unblock eh_abort() */
wake_up(&conn->ehwait);
}
@@ -1621,7 +1650,7 @@
spin_unlock_bh(&session->lock);
iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED);
spin_lock_bh(&session->lock);
- ISCSI_DBG_SESSION(session, "tmf exec failure\n");
+ ISCSI_DBG_EH(session, "tmf exec failure\n");
return -EPERM;
}
conn->tmfcmd_pdus_cnt++;
@@ -1629,7 +1658,7 @@
conn->tmf_timer.function = iscsi_tmf_timedout;
conn->tmf_timer.data = (unsigned long)conn;
add_timer(&conn->tmf_timer);
- ISCSI_DBG_SESSION(session, "tmf set timeout\n");
+ ISCSI_DBG_EH(session, "tmf set timeout\n");
spin_unlock_bh(&session->lock);
mutex_unlock(&session->eh_mutex);
@@ -1716,17 +1745,18 @@
return 0;
}
-static enum blk_eh_timer_return iscsi_eh_cmd_timed_out(struct scsi_cmnd *scmd)
+static enum blk_eh_timer_return iscsi_eh_cmd_timed_out(struct scsi_cmnd *sc)
{
+ enum blk_eh_timer_return rc = BLK_EH_NOT_HANDLED;
+ struct iscsi_task *task = NULL;
struct iscsi_cls_session *cls_session;
struct iscsi_session *session;
struct iscsi_conn *conn;
- enum blk_eh_timer_return rc = BLK_EH_NOT_HANDLED;
- cls_session = starget_to_session(scsi_target(scmd->device));
+ cls_session = starget_to_session(scsi_target(sc->device));
session = cls_session->dd_data;
- ISCSI_DBG_SESSION(session, "scsi cmd %p timedout\n", scmd);
+ ISCSI_DBG_EH(session, "scsi cmd %p timedout\n", sc);
spin_lock(&session->lock);
if (session->state != ISCSI_STATE_LOGGED_IN) {
@@ -1745,6 +1775,26 @@
goto done;
}
+ task = (struct iscsi_task *)sc->SCp.ptr;
+ if (!task)
+ goto done;
+ /*
+ * If we have sent (at least queued to the network layer) a pdu or
+ * recvd one for the task since the last timeout ask for
+ * more time. If on the next timeout we have not made progress
+ * we can check if it is the task or connection when we send the
+ * nop as a ping.
+ */
+ if (time_after_eq(task->last_xfer, task->last_timeout)) {
+ ISCSI_DBG_EH(session, "Command making progress. Asking "
+ "scsi-ml for more time to complete. "
+ "Last data recv at %lu. Last timeout was at "
+ "%lu\n.", task->last_xfer, task->last_timeout);
+ task->have_checked_conn = false;
+ rc = BLK_EH_RESET_TIMER;
+ goto done;
+ }
+
if (!conn->recv_timeout && !conn->ping_timeout)
goto done;
/*
@@ -1755,23 +1805,32 @@
rc = BLK_EH_RESET_TIMER;
goto done;
}
+
+ /* Assumes nop timeout is shorter than scsi cmd timeout */
+ if (task->have_checked_conn)
+ goto done;
+
/*
- * if we are about to check the transport then give the command
- * more time
+ * Checking the transport already or nop from a cmd timeout still
+ * running
*/
- if (time_before_eq(conn->last_recv + (conn->recv_timeout * HZ),
- jiffies)) {
+ if (conn->ping_task) {
+ task->have_checked_conn = true;
rc = BLK_EH_RESET_TIMER;
goto done;
}
- /* if in the middle of checking the transport then give us more time */
- if (conn->ping_task)
- rc = BLK_EH_RESET_TIMER;
+ /* Make sure there is a transport check done */
+ iscsi_send_nopout(conn, NULL);
+ task->have_checked_conn = true;
+ rc = BLK_EH_RESET_TIMER;
+
done:
+ if (task)
+ task->last_timeout = jiffies;
spin_unlock(&session->lock);
- ISCSI_DBG_SESSION(session, "return %s\n", rc == BLK_EH_RESET_TIMER ?
- "timer reset" : "nh");
+ ISCSI_DBG_EH(session, "return %s\n", rc == BLK_EH_RESET_TIMER ?
+ "timer reset" : "nh");
return rc;
}
@@ -1841,7 +1900,7 @@
cls_session = starget_to_session(scsi_target(sc->device));
session = cls_session->dd_data;
- ISCSI_DBG_SESSION(session, "aborting sc %p\n", sc);
+ ISCSI_DBG_EH(session, "aborting sc %p\n", sc);
mutex_lock(&session->eh_mutex);
spin_lock_bh(&session->lock);
@@ -1850,8 +1909,8 @@
* got the command.
*/
if (!sc->SCp.ptr) {
- ISCSI_DBG_SESSION(session, "sc never reached iscsi layer or "
- "it completed.\n");
+ ISCSI_DBG_EH(session, "sc never reached iscsi layer or "
+ "it completed.\n");
spin_unlock_bh(&session->lock);
mutex_unlock(&session->eh_mutex);
return SUCCESS;
@@ -1865,7 +1924,7 @@
sc->SCp.phase != session->age) {
spin_unlock_bh(&session->lock);
mutex_unlock(&session->eh_mutex);
- ISCSI_DBG_SESSION(session, "failing abort due to dropped "
+ ISCSI_DBG_EH(session, "failing abort due to dropped "
"session.\n");
return FAILED;
}
@@ -1875,13 +1934,12 @@
age = session->age;
task = (struct iscsi_task *)sc->SCp.ptr;
- ISCSI_DBG_SESSION(session, "aborting [sc %p itt 0x%x]\n",
- sc, task->itt);
+ ISCSI_DBG_EH(session, "aborting [sc %p itt 0x%x]\n",
+ sc, task->itt);
/* task completed before time out */
if (!task->sc) {
- ISCSI_DBG_SESSION(session, "sc completed while abort in "
- "progress\n");
+ ISCSI_DBG_EH(session, "sc completed while abort in progress\n");
goto success;
}
@@ -1930,8 +1988,8 @@
if (!sc->SCp.ptr) {
conn->tmf_state = TMF_INITIAL;
/* task completed before tmf abort response */
- ISCSI_DBG_SESSION(session, "sc completed while abort "
- "in progress\n");
+ ISCSI_DBG_EH(session, "sc completed while abort in "
+ "progress\n");
goto success;
}
/* fall through */
@@ -1943,16 +2001,16 @@
success:
spin_unlock_bh(&session->lock);
success_unlocked:
- ISCSI_DBG_SESSION(session, "abort success [sc %p itt 0x%x]\n",
- sc, task->itt);
+ ISCSI_DBG_EH(session, "abort success [sc %p itt 0x%x]\n",
+ sc, task->itt);
mutex_unlock(&session->eh_mutex);
return SUCCESS;
failed:
spin_unlock_bh(&session->lock);
failed_unlocked:
- ISCSI_DBG_SESSION(session, "abort failed [sc %p itt 0x%x]\n", sc,
- task ? task->itt : 0);
+ ISCSI_DBG_EH(session, "abort failed [sc %p itt 0x%x]\n", sc,
+ task ? task->itt : 0);
mutex_unlock(&session->eh_mutex);
return FAILED;
}
@@ -1979,8 +2037,7 @@
cls_session = starget_to_session(scsi_target(sc->device));
session = cls_session->dd_data;
- ISCSI_DBG_SESSION(session, "LU Reset [sc %p lun %u]\n",
- sc, sc->device->lun);
+ ISCSI_DBG_EH(session, "LU Reset [sc %p lun %u]\n", sc, sc->device->lun);
mutex_lock(&session->eh_mutex);
spin_lock_bh(&session->lock);
@@ -2034,8 +2091,8 @@
unlock:
spin_unlock_bh(&session->lock);
done:
- ISCSI_DBG_SESSION(session, "dev reset result = %s\n",
- rc == SUCCESS ? "SUCCESS" : "FAILED");
+ ISCSI_DBG_EH(session, "dev reset result = %s\n",
+ rc == SUCCESS ? "SUCCESS" : "FAILED");
mutex_unlock(&session->eh_mutex);
return rc;
}
diff --git a/drivers/scsi/libiscsi_tcp.c b/drivers/scsi/libiscsi_tcp.c
index 2bc0709..2e0746d 100644
--- a/drivers/scsi/libiscsi_tcp.c
+++ b/drivers/scsi/libiscsi_tcp.c
@@ -686,6 +686,7 @@
"offset=%d, datalen=%d)\n",
tcp_task->data_offset,
tcp_conn->in.datalen);
+ task->last_xfer = jiffies;
rc = iscsi_segment_seek_sg(&tcp_conn->in.segment,
sdb->table.sgl,
sdb->table.nents,
@@ -713,9 +714,10 @@
rc = ISCSI_ERR_BAD_ITT;
else if (ahslen)
rc = ISCSI_ERR_AHSLEN;
- else if (task->sc->sc_data_direction == DMA_TO_DEVICE)
+ else if (task->sc->sc_data_direction == DMA_TO_DEVICE) {
+ task->last_xfer = jiffies;
rc = iscsi_tcp_r2t_rsp(conn, task);
- else
+ } else
rc = ISCSI_ERR_PROTO;
spin_unlock(&conn->session->lock);
break;
diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c
index 4a990f4..cca8e4a 100644
--- a/drivers/scsi/qla2xxx/qla_dbg.c
+++ b/drivers/scsi/qla2xxx/qla_dbg.c
@@ -216,7 +216,7 @@
static int
qla2xxx_dump_ram(struct qla_hw_data *ha, uint32_t addr, uint16_t *ram,
- uint16_t ram_words, void **nxt)
+ uint32_t ram_words, void **nxt)
{
int rval;
uint32_t cnt, stat, timer, words, idx;
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 2620261..f2ce8e3 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -2301,7 +2301,7 @@
static char *link_speeds[] = { "1", "2", "?", "4", "8", "10" };
char *link_speed;
int rval;
- uint16_t mb[6];
+ uint16_t mb[4];
struct qla_hw_data *ha = vha->hw;
if (!IS_IIDMA_CAPABLE(ha))
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index 451ece0..fe69f30 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -1267,17 +1267,22 @@
mcp->mb[0] = MBC_GET_FIRMWARE_STATE;
mcp->out_mb = MBX_0;
- mcp->in_mb = MBX_5|MBX_4|MBX_3|MBX_2|MBX_1|MBX_0;
+ if (IS_FWI2_CAPABLE(vha->hw))
+ mcp->in_mb = MBX_5|MBX_4|MBX_3|MBX_2|MBX_1|MBX_0;
+ else
+ mcp->in_mb = MBX_1|MBX_0;
mcp->tov = MBX_TOV_SECONDS;
mcp->flags = 0;
rval = qla2x00_mailbox_command(vha, mcp);
/* Return firmware states. */
states[0] = mcp->mb[1];
- states[1] = mcp->mb[2];
- states[2] = mcp->mb[3];
- states[3] = mcp->mb[4];
- states[4] = mcp->mb[5];
+ if (IS_FWI2_CAPABLE(vha->hw)) {
+ states[1] = mcp->mb[2];
+ states[2] = mcp->mb[3];
+ states[3] = mcp->mb[4];
+ states[4] = mcp->mb[5];
+ }
if (rval != QLA_SUCCESS) {
/*EMPTY*/
@@ -2697,10 +2702,13 @@
mcp->mb[0] = MBC_PORT_PARAMS;
mcp->mb[1] = loop_id;
mcp->mb[2] = BIT_0;
- mcp->mb[3] = port_speed & (BIT_2|BIT_1|BIT_0);
- mcp->mb[4] = mcp->mb[5] = 0;
- mcp->out_mb = MBX_5|MBX_4|MBX_3|MBX_2|MBX_1|MBX_0;
- mcp->in_mb = MBX_5|MBX_4|MBX_3|MBX_1|MBX_0;
+ if (IS_QLA81XX(vha->hw))
+ mcp->mb[3] = port_speed & (BIT_5|BIT_4|BIT_3|BIT_2|BIT_1|BIT_0);
+ else
+ mcp->mb[3] = port_speed & (BIT_2|BIT_1|BIT_0);
+ mcp->mb[9] = vha->vp_idx;
+ mcp->out_mb = MBX_9|MBX_3|MBX_2|MBX_1|MBX_0;
+ mcp->in_mb = MBX_3|MBX_1|MBX_0;
mcp->tov = MBX_TOV_SECONDS;
mcp->flags = 0;
rval = qla2x00_mailbox_command(vha, mcp);
@@ -2710,8 +2718,6 @@
mb[0] = mcp->mb[0];
mb[1] = mcp->mb[1];
mb[3] = mcp->mb[3];
- mb[4] = mcp->mb[4];
- mb[5] = mcp->mb[5];
}
if (rval != QLA_SUCCESS) {
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index dcf01167..f0396e7 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -1663,7 +1663,7 @@
/* queue 0 uses two msix vectors */
if (ql2xmultique_tag) {
cpus = num_online_cpus();
- ha->max_rsp_queues = (ha->msix_count - 1 - cpus) ?
+ ha->max_rsp_queues = (ha->msix_count - 1 > cpus) ?
(cpus + 1) : (ha->msix_count - 1);
ha->max_req_queues = 2;
} else if (ql2xmaxqueues > 1) {
diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h
index b63feaf..8436970 100644
--- a/drivers/scsi/qla2xxx/qla_version.h
+++ b/drivers/scsi/qla2xxx/qla_version.h
@@ -7,7 +7,7 @@
/*
* Driver version
*/
-#define QLA2XXX_VERSION "8.03.01-k3"
+#define QLA2XXX_VERSION "8.03.01-k4"
#define QLA_DRIVER_MAJOR_VER 8
#define QLA_DRIVER_MINOR_VER 3
diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c
index 41a2177..fb9af20 100644
--- a/drivers/scsi/scsi_debug.c
+++ b/drivers/scsi/scsi_debug.c
@@ -101,6 +101,8 @@
#define DEF_DIF 0
#define DEF_GUARD 0
#define DEF_ATO 1
+#define DEF_PHYSBLK_EXP 0
+#define DEF_LOWEST_ALIGNED 0
/* bit mask values for scsi_debug_opts */
#define SCSI_DEBUG_OPT_NOISE 1
@@ -156,6 +158,8 @@
static int scsi_debug_dif = DEF_DIF;
static int scsi_debug_guard = DEF_GUARD;
static int scsi_debug_ato = DEF_ATO;
+static int scsi_debug_physblk_exp = DEF_PHYSBLK_EXP;
+static int scsi_debug_lowest_aligned = DEF_LOWEST_ALIGNED;
static int scsi_debug_cmnd_count = 0;
@@ -657,7 +661,12 @@
static int inquiry_evpd_b0(unsigned char * arr)
{
+ unsigned int gran;
+
memcpy(arr, vpdb0_data, sizeof(vpdb0_data));
+ gran = 1 << scsi_debug_physblk_exp;
+ arr[2] = (gran >> 8) & 0xff;
+ arr[3] = gran & 0xff;
if (sdebug_store_sectors > 0x400) {
arr[4] = (sdebug_store_sectors >> 24) & 0xff;
arr[5] = (sdebug_store_sectors >> 16) & 0xff;
@@ -945,6 +954,9 @@
arr[9] = (scsi_debug_sector_size >> 16) & 0xff;
arr[10] = (scsi_debug_sector_size >> 8) & 0xff;
arr[11] = scsi_debug_sector_size & 0xff;
+ arr[13] = scsi_debug_physblk_exp & 0xf;
+ arr[14] = (scsi_debug_lowest_aligned >> 8) & 0x3f;
+ arr[15] = scsi_debug_lowest_aligned & 0xff;
if (scsi_debug_dif) {
arr[12] = (scsi_debug_dif - 1) << 1; /* P_TYPE */
@@ -2380,6 +2392,8 @@
module_param_named(dif, scsi_debug_dif, int, S_IRUGO);
module_param_named(guard, scsi_debug_guard, int, S_IRUGO);
module_param_named(ato, scsi_debug_ato, int, S_IRUGO);
+module_param_named(physblk_exp, scsi_debug_physblk_exp, int, S_IRUGO);
+module_param_named(lowest_aligned, scsi_debug_lowest_aligned, int, S_IRUGO);
MODULE_AUTHOR("Eric Youngdale + Douglas Gilbert");
MODULE_DESCRIPTION("SCSI debug adapter driver");
@@ -2401,7 +2415,9 @@
MODULE_PARM_DESC(scsi_level, "SCSI level to simulate(def=5[SPC-3])");
MODULE_PARM_DESC(virtual_gb, "virtual gigabyte size (def=0 -> use dev_size_mb)");
MODULE_PARM_DESC(vpd_use_hostno, "0 -> dev ids ignore hostno (def=1 -> unique dev ids)");
-MODULE_PARM_DESC(sector_size, "hardware sector size in bytes (def=512)");
+MODULE_PARM_DESC(sector_size, "logical block size in bytes (def=512)");
+MODULE_PARM_DESC(physblk_exp, "physical block exponent (def=0)");
+MODULE_PARM_DESC(lowest_aligned, "lowest aligned lba (def=0)");
MODULE_PARM_DESC(dix, "data integrity extensions mask (def=0)");
MODULE_PARM_DESC(dif, "data integrity field type: 0-3 (def=0)");
MODULE_PARM_DESC(guard, "protection checksum: 0=crc, 1=ip (def=0)");
@@ -2874,6 +2890,18 @@
return -EINVAL;
}
+ if (scsi_debug_physblk_exp > 15) {
+ printk(KERN_ERR "scsi_debug_init: invalid physblk_exp %u\n",
+ scsi_debug_physblk_exp);
+ return -EINVAL;
+ }
+
+ if (scsi_debug_lowest_aligned > 0x3fff) {
+ printk(KERN_ERR "scsi_debug_init: lowest_aligned too big: %u\n",
+ scsi_debug_lowest_aligned);
+ return -EINVAL;
+ }
+
if (scsi_debug_dev_size_mb < 1)
scsi_debug_dev_size_mb = 1; /* force minimum 1 MB ramdisk */
sz = (unsigned long)scsi_debug_dev_size_mb * 1048576;
diff --git a/drivers/scsi/scsi_devinfo.c b/drivers/scsi/scsi_devinfo.c
index 8821df9..93c2622 100644
--- a/drivers/scsi/scsi_devinfo.c
+++ b/drivers/scsi/scsi_devinfo.c
@@ -24,6 +24,13 @@
unsigned compatible; /* for use with scsi_static_device_list entries */
};
+struct scsi_dev_info_list_table {
+ struct list_head node; /* our node for being on the master list */
+ struct list_head scsi_dev_info_list; /* head of dev info list */
+ const char *name; /* name of list for /proc (NULL for global) */
+ int key; /* unique numeric identifier */
+};
+
static const char spaces[] = " "; /* 16 of them */
static unsigned scsi_default_dev_flags;
@@ -247,6 +254,22 @@
{ NULL, NULL, NULL, 0 },
};
+static struct scsi_dev_info_list_table *scsi_devinfo_lookup_by_key(int key)
+{
+ struct scsi_dev_info_list_table *devinfo_table;
+ int found = 0;
+
+ list_for_each_entry(devinfo_table, &scsi_dev_info_list, node)
+ if (devinfo_table->key == key) {
+ found = 1;
+ break;
+ }
+ if (!found)
+ return ERR_PTR(-EINVAL);
+
+ return devinfo_table;
+}
+
/*
* scsi_strcpy_devinfo: called from scsi_dev_info_list_add to copy into
* devinfo vendor and model strings.
@@ -296,7 +319,38 @@
static int scsi_dev_info_list_add(int compatible, char *vendor, char *model,
char *strflags, int flags)
{
+ return scsi_dev_info_list_add_keyed(compatible, vendor, model,
+ strflags, flags,
+ SCSI_DEVINFO_GLOBAL);
+}
+
+/**
+ * scsi_dev_info_list_add_keyed - add one dev_info list entry.
+ * @compatible: if true, null terminate short strings. Otherwise space pad.
+ * @vendor: vendor string
+ * @model: model (product) string
+ * @strflags: integer string
+ * @flags: if strflags NULL, use this flag value
+ * @key: specify list to use
+ *
+ * Description:
+ * Create and add one dev_info entry for @vendor, @model,
+ * @strflags or @flag in list specified by @key. If @compatible,
+ * add to the tail of the list, do not space pad, and set
+ * devinfo->compatible. The scsi_static_device_list entries are
+ * added with @compatible 1 and @clfags NULL.
+ *
+ * Returns: 0 OK, -error on failure.
+ **/
+int scsi_dev_info_list_add_keyed(int compatible, char *vendor, char *model,
+ char *strflags, int flags, int key)
+{
struct scsi_dev_info_list *devinfo;
+ struct scsi_dev_info_list_table *devinfo_table =
+ scsi_devinfo_lookup_by_key(key);
+
+ if (IS_ERR(devinfo_table))
+ return PTR_ERR(devinfo_table);
devinfo = kmalloc(sizeof(*devinfo), GFP_KERNEL);
if (!devinfo) {
@@ -317,12 +371,15 @@
devinfo->compatible = compatible;
if (compatible)
- list_add_tail(&devinfo->dev_info_list, &scsi_dev_info_list);
+ list_add_tail(&devinfo->dev_info_list,
+ &devinfo_table->scsi_dev_info_list);
else
- list_add(&devinfo->dev_info_list, &scsi_dev_info_list);
+ list_add(&devinfo->dev_info_list,
+ &devinfo_table->scsi_dev_info_list);
return 0;
}
+EXPORT_SYMBOL(scsi_dev_info_list_add_keyed);
/**
* scsi_dev_info_list_add_str - parse dev_list and add to the scsi_dev_info_list.
@@ -382,22 +439,48 @@
* @model: model name
*
* Description:
- * Search the scsi_dev_info_list for an entry matching @vendor and
- * @model, if found, return the matching flags value, else return
- * the host or global default settings. Called during scan time.
+ * Search the global scsi_dev_info_list (specified by list zero)
+ * for an entry matching @vendor and @model, if found, return the
+ * matching flags value, else return the host or global default
+ * settings. Called during scan time.
**/
int scsi_get_device_flags(struct scsi_device *sdev,
const unsigned char *vendor,
const unsigned char *model)
{
+ return scsi_get_device_flags_keyed(sdev, vendor, model,
+ SCSI_DEVINFO_GLOBAL);
+}
+
+
+/**
+ * get_device_flags_keyed - get device specific flags from the dynamic device list.
+ * @sdev: &scsi_device to get flags for
+ * @vendor: vendor name
+ * @model: model name
+ * @key: list to look up
+ *
+ * Description:
+ * Search the scsi_dev_info_list specified by @key for an entry
+ * matching @vendor and @model, if found, return the matching
+ * flags value, else return the host or global default settings.
+ * Called during scan time.
+ **/
+int scsi_get_device_flags_keyed(struct scsi_device *sdev,
+ const unsigned char *vendor,
+ const unsigned char *model,
+ int key)
+{
struct scsi_dev_info_list *devinfo;
- unsigned int bflags;
+ struct scsi_dev_info_list_table *devinfo_table;
- bflags = sdev->sdev_bflags;
- if (!bflags)
- bflags = scsi_default_dev_flags;
+ devinfo_table = scsi_devinfo_lookup_by_key(key);
- list_for_each_entry(devinfo, &scsi_dev_info_list, dev_info_list) {
+ if (IS_ERR(devinfo_table))
+ return PTR_ERR(devinfo_table);
+
+ list_for_each_entry(devinfo, &devinfo_table->scsi_dev_info_list,
+ dev_info_list) {
if (devinfo->compatible) {
/*
* Behave like the older version of get_device_flags.
@@ -447,32 +530,89 @@
return devinfo->flags;
}
}
- return bflags;
+ /* nothing found, return nothing */
+ if (key != SCSI_DEVINFO_GLOBAL)
+ return 0;
+
+ /* except for the global list, where we have an exception */
+ if (sdev->sdev_bflags)
+ return sdev->sdev_bflags;
+
+ return scsi_default_dev_flags;
}
+EXPORT_SYMBOL(scsi_get_device_flags_keyed);
#ifdef CONFIG_SCSI_PROC_FS
+struct double_list {
+ struct list_head *top;
+ struct list_head *bottom;
+};
+
static int devinfo_seq_show(struct seq_file *m, void *v)
{
+ struct double_list *dl = v;
+ struct scsi_dev_info_list_table *devinfo_table =
+ list_entry(dl->top, struct scsi_dev_info_list_table, node);
struct scsi_dev_info_list *devinfo =
- list_entry(v, struct scsi_dev_info_list, dev_info_list);
+ list_entry(dl->bottom, struct scsi_dev_info_list,
+ dev_info_list);
+
+ if (devinfo_table->scsi_dev_info_list.next == dl->bottom &&
+ devinfo_table->name)
+ seq_printf(m, "[%s]:\n", devinfo_table->name);
seq_printf(m, "'%.8s' '%.16s' 0x%x\n",
- devinfo->vendor, devinfo->model, devinfo->flags);
+ devinfo->vendor, devinfo->model, devinfo->flags);
return 0;
}
-static void * devinfo_seq_start(struct seq_file *m, loff_t *pos)
+static void *devinfo_seq_start(struct seq_file *m, loff_t *ppos)
{
- return seq_list_start(&scsi_dev_info_list, *pos);
+ struct double_list *dl = kmalloc(sizeof(*dl), GFP_KERNEL);
+ loff_t pos = *ppos;
+
+ if (!dl)
+ return NULL;
+
+ list_for_each(dl->top, &scsi_dev_info_list) {
+ struct scsi_dev_info_list_table *devinfo_table =
+ list_entry(dl->top, struct scsi_dev_info_list_table,
+ node);
+ list_for_each(dl->bottom, &devinfo_table->scsi_dev_info_list)
+ if (pos-- == 0)
+ return dl;
+ }
+
+ kfree(dl);
+ return NULL;
}
-static void * devinfo_seq_next(struct seq_file *m, void *v, loff_t *pos)
+static void *devinfo_seq_next(struct seq_file *m, void *v, loff_t *ppos)
{
- return seq_list_next(v, &scsi_dev_info_list, pos);
+ struct double_list *dl = v;
+ struct scsi_dev_info_list_table *devinfo_table =
+ list_entry(dl->top, struct scsi_dev_info_list_table, node);
+
+ ++*ppos;
+ dl->bottom = dl->bottom->next;
+ while (&devinfo_table->scsi_dev_info_list == dl->bottom) {
+ dl->top = dl->top->next;
+ if (dl->top == &scsi_dev_info_list) {
+ kfree(dl);
+ return NULL;
+ }
+ devinfo_table = list_entry(dl->top,
+ struct scsi_dev_info_list_table,
+ node);
+ dl->bottom = devinfo_table->scsi_dev_info_list.next;
+ }
+
+ return dl;
}
static void devinfo_seq_stop(struct seq_file *m, void *v)
{
+ kfree(v);
}
static const struct seq_operations scsi_devinfo_seq_ops = {
@@ -549,19 +689,78 @@
**/
void scsi_exit_devinfo(void)
{
- struct list_head *lh, *lh_next;
- struct scsi_dev_info_list *devinfo;
-
#ifdef CONFIG_SCSI_PROC_FS
remove_proc_entry("scsi/device_info", NULL);
#endif
- list_for_each_safe(lh, lh_next, &scsi_dev_info_list) {
+ scsi_dev_info_remove_list(SCSI_DEVINFO_GLOBAL);
+}
+
+/**
+ * scsi_dev_info_add_list - add a new devinfo list
+ * @key: key of the list to add
+ * @name: Name of the list to add (for /proc/scsi/device_info)
+ *
+ * Adds the requested list, returns zero on success, -EEXIST if the
+ * key is already registered to a list, or other error on failure.
+ */
+int scsi_dev_info_add_list(int key, const char *name)
+{
+ struct scsi_dev_info_list_table *devinfo_table =
+ scsi_devinfo_lookup_by_key(key);
+
+ if (!IS_ERR(devinfo_table))
+ /* list already exists */
+ return -EEXIST;
+
+ devinfo_table = kmalloc(sizeof(*devinfo_table), GFP_KERNEL);
+
+ if (!devinfo_table)
+ return -ENOMEM;
+
+ INIT_LIST_HEAD(&devinfo_table->node);
+ INIT_LIST_HEAD(&devinfo_table->scsi_dev_info_list);
+ devinfo_table->name = name;
+ devinfo_table->key = key;
+ list_add_tail(&devinfo_table->node, &scsi_dev_info_list);
+
+ return 0;
+}
+EXPORT_SYMBOL(scsi_dev_info_add_list);
+
+/**
+ * scsi_dev_info_remove_list - destroy an added devinfo list
+ * @key: key of the list to destroy
+ *
+ * Iterates over the entire list first, freeing all the values, then
+ * frees the list itself. Returns 0 on success or -EINVAL if the key
+ * can't be found.
+ */
+int scsi_dev_info_remove_list(int key)
+{
+ struct list_head *lh, *lh_next;
+ struct scsi_dev_info_list_table *devinfo_table =
+ scsi_devinfo_lookup_by_key(key);
+
+ if (IS_ERR(devinfo_table))
+ /* no such list */
+ return -EINVAL;
+
+ /* remove from the master list */
+ list_del(&devinfo_table->node);
+
+ list_for_each_safe(lh, lh_next, &devinfo_table->scsi_dev_info_list) {
+ struct scsi_dev_info_list *devinfo;
+
devinfo = list_entry(lh, struct scsi_dev_info_list,
dev_info_list);
kfree(devinfo);
}
+ kfree(devinfo_table);
+
+ return 0;
}
+EXPORT_SYMBOL(scsi_dev_info_remove_list);
/**
* scsi_init_devinfo - set up the dynamic device list.
@@ -577,10 +776,14 @@
#endif
int error, i;
- error = scsi_dev_info_list_add_str(scsi_dev_flags);
+ error = scsi_dev_info_add_list(SCSI_DEVINFO_GLOBAL, NULL);
if (error)
return error;
+ error = scsi_dev_info_list_add_str(scsi_dev_flags);
+ if (error)
+ goto out;
+
for (i = 0; scsi_static_device_list[i].vendor; i++) {
error = scsi_dev_info_list_add(1 /* compatibile */,
scsi_static_device_list[i].vendor,
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 30f3275..f3c4089 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -1207,6 +1207,7 @@
ret = scsi_setup_blk_pc_cmnd(sdev, req);
return scsi_prep_return(q, req, ret);
}
+EXPORT_SYMBOL(scsi_prep_fn);
/*
* scsi_dev_queue_ready: if we can send requests to sdev, return 1 else
diff --git a/drivers/scsi/scsi_priv.h b/drivers/scsi/scsi_priv.h
index fbc83be..021e503 100644
--- a/drivers/scsi/scsi_priv.h
+++ b/drivers/scsi/scsi_priv.h
@@ -39,9 +39,25 @@
#endif
/* scsi_devinfo.c */
+
+/* list of keys for the lists */
+enum {
+ SCSI_DEVINFO_GLOBAL = 0,
+ SCSI_DEVINFO_SPI,
+};
+
extern int scsi_get_device_flags(struct scsi_device *sdev,
const unsigned char *vendor,
const unsigned char *model);
+extern int scsi_get_device_flags_keyed(struct scsi_device *sdev,
+ const unsigned char *vendor,
+ const unsigned char *model, int key);
+extern int scsi_dev_info_list_add_keyed(int compatible, char *vendor,
+ char *model, char *strflags,
+ int flags, int key);
+extern int scsi_dev_info_add_list(int key, const char *name);
+extern int scsi_dev_info_remove_list(int key);
+
extern int __init scsi_init_devinfo(void);
extern void scsi_exit_devinfo(void);
@@ -71,7 +87,6 @@
extern void scsi_exit_queue(void);
struct request_queue;
struct request;
-extern int scsi_prep_fn(struct request_queue *, struct request *);
extern struct kmem_cache *scsi_sdb_cache;
/* scsi_proc.c */
diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index fa4711d..91482f2 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -420,29 +420,12 @@
return err;
}
-static int scsi_bus_remove(struct device *dev)
-{
- struct device_driver *drv = dev->driver;
- struct scsi_device *sdev = to_scsi_device(dev);
- int err = 0;
-
- /* reset the prep_fn back to the default since the
- * driver may have altered it and it's being removed */
- blk_queue_prep_rq(sdev->request_queue, scsi_prep_fn);
-
- if (drv && drv->remove)
- err = drv->remove(dev);
-
- return 0;
-}
-
struct bus_type scsi_bus_type = {
.name = "scsi",
.match = scsi_bus_match,
.uevent = scsi_bus_uevent,
.suspend = scsi_bus_suspend,
.resume = scsi_bus_resume,
- .remove = scsi_bus_remove,
};
EXPORT_SYMBOL_GPL(scsi_bus_type);
diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c
index 3f64d93..2eee9e6 100644
--- a/drivers/scsi/scsi_transport_fc.c
+++ b/drivers/scsi/scsi_transport_fc.c
@@ -3397,7 +3397,6 @@
kfree(job);
}
-
/**
* fc_bsg_jobdone - completion routine for bsg requests that the LLD has
* completed
@@ -3408,15 +3407,10 @@
{
struct request *req = job->req;
struct request *rsp = req->next_rq;
- unsigned long flags;
int err;
- spin_lock_irqsave(&job->job_lock, flags);
- job->state_flags |= FC_RQST_STATE_DONE;
- job->ref_cnt--;
- spin_unlock_irqrestore(&job->job_lock, flags);
-
err = job->req->errors = job->reply->result;
+
if (err < 0)
/* we're only returning the result field in the reply */
job->req->sense_len = sizeof(uint32_t);
@@ -3433,12 +3427,26 @@
rsp->resid_len -= min(job->reply->reply_payload_rcv_len,
rsp->resid_len);
}
-
- blk_end_request_all(req, err);
-
- fc_destroy_bsgjob(job);
+ blk_complete_request(req);
}
+/**
+ * fc_bsg_softirq_done - softirq done routine for destroying the bsg requests
+ * @req: BSG request that holds the job to be destroyed
+ */
+static void fc_bsg_softirq_done(struct request *rq)
+{
+ struct fc_bsg_job *job = rq->special;
+ unsigned long flags;
+
+ spin_lock_irqsave(&job->job_lock, flags);
+ job->state_flags |= FC_RQST_STATE_DONE;
+ job->ref_cnt--;
+ spin_unlock_irqrestore(&job->job_lock, flags);
+
+ blk_end_request_all(rq, rq->errors);
+ fc_destroy_bsgjob(job);
+}
/**
* fc_bsg_job_timeout - handler for when a bsg request timesout
@@ -3471,19 +3479,13 @@
"abort failed with status %d\n", err);
}
- if (!done) {
- spin_lock_irqsave(&job->job_lock, flags);
- job->ref_cnt--;
- spin_unlock_irqrestore(&job->job_lock, flags);
- fc_destroy_bsgjob(job);
- }
-
/* the blk_end_sync_io() doesn't check the error */
- return BLK_EH_HANDLED;
+ if (done)
+ return BLK_EH_NOT_HANDLED;
+ else
+ return BLK_EH_HANDLED;
}
-
-
static int
fc_bsg_map_buffer(struct fc_bsg_buffer *buf, struct request *req)
{
@@ -3859,7 +3861,7 @@
struct fc_internal *i = to_fc_internal(shost->transportt);
struct request_queue *q;
int err;
- char bsg_name[BUS_ID_SIZE]; /*20*/
+ char bsg_name[20];
fc_host->rqst_q = NULL;
@@ -3879,6 +3881,7 @@
q->queuedata = shost;
queue_flag_set_unlocked(QUEUE_FLAG_BIDI, q);
+ blk_queue_softirq_done(q, fc_bsg_softirq_done);
blk_queue_rq_timed_out(q, fc_bsg_job_timeout);
blk_queue_rq_timeout(q, FC_DEFAULT_BSG_TIMEOUT);
@@ -3924,6 +3927,7 @@
q->queuedata = rport;
queue_flag_set_unlocked(QUEUE_FLAG_BIDI, q);
+ blk_queue_softirq_done(q, fc_bsg_softirq_done);
blk_queue_rq_timed_out(q, fc_bsg_job_timeout);
blk_queue_rq_timeout(q, BLK_DEFAULT_SG_TIMEOUT);
diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c
index f3e6646..783e33c 100644
--- a/drivers/scsi/scsi_transport_iscsi.c
+++ b/drivers/scsi/scsi_transport_iscsi.c
@@ -692,6 +692,7 @@
"Too many iscsi targets. Max "
"number of targets is %d.\n",
ISCSI_MAX_TARGET - 1);
+ err = -EOVERFLOW;
goto release_host;
}
}
diff --git a/drivers/scsi/scsi_transport_sas.c b/drivers/scsi/scsi_transport_sas.c
index d606452..0895d3c 100644
--- a/drivers/scsi/scsi_transport_sas.c
+++ b/drivers/scsi/scsi_transport_sas.c
@@ -173,9 +173,9 @@
ret = handler(shost, rphy, req);
req->errors = ret;
- spin_lock_irq(q->queue_lock);
+ blk_end_request_all(req, ret);
- req->end_io(req, ret);
+ spin_lock_irq(q->queue_lock);
}
}
diff --git a/drivers/scsi/scsi_transport_spi.c b/drivers/scsi/scsi_transport_spi.c
index 654a34f..c25bd9a 100644
--- a/drivers/scsi/scsi_transport_spi.c
+++ b/drivers/scsi/scsi_transport_spi.c
@@ -46,6 +46,22 @@
#define DV_RETRIES 3 /* should only need at most
* two cc/ua clears */
+/* Our blacklist flags */
+enum {
+ SPI_BLIST_NOIUS = 0x1,
+};
+
+/* blacklist table, modelled on scsi_devinfo.c */
+static struct {
+ char *vendor;
+ char *model;
+ unsigned flags;
+} spi_static_device_list[] __initdata = {
+ {"HP", "Ultrium 3-SCSI", SPI_BLIST_NOIUS },
+ {"IBM", "ULTRIUM-TD3", SPI_BLIST_NOIUS },
+ {NULL, NULL, 0}
+};
+
/* Private data accessors (keep these out of the header file) */
#define spi_dv_in_progress(x) (((struct spi_transport_attrs *)&(x)->starget_data)->dv_in_progress)
#define spi_dv_mutex(x) (((struct spi_transport_attrs *)&(x)->starget_data)->dv_mutex)
@@ -207,6 +223,9 @@
{
struct scsi_device *sdev = to_scsi_device(dev);
struct scsi_target *starget = sdev->sdev_target;
+ unsigned bflags = scsi_get_device_flags_keyed(sdev, &sdev->inquiry[8],
+ &sdev->inquiry[16],
+ SCSI_DEVINFO_SPI);
/* Populate the target capability fields with the values
* gleaned from the device inquiry */
@@ -216,6 +235,10 @@
spi_support_dt(starget) = scsi_device_dt(sdev);
spi_support_dt_only(starget) = scsi_device_dt_only(sdev);
spi_support_ius(starget) = scsi_device_ius(sdev);
+ if (bflags & SPI_BLIST_NOIUS) {
+ dev_info(dev, "Information Units disabled by blacklist\n");
+ spi_support_ius(starget) = 0;
+ }
spi_support_qas(starget) = scsi_device_qas(sdev);
return 0;
@@ -833,7 +856,7 @@
return;
}
- if (!scsi_device_wide(sdev)) {
+ if (!spi_support_wide(starget)) {
spi_max_width(starget) = 0;
max_width = 0;
}
@@ -860,7 +883,7 @@
return;
/* device can't handle synchronous */
- if (!scsi_device_sync(sdev) && !scsi_device_dt(sdev))
+ if (!spi_support_sync(starget) && !spi_support_dt(starget))
return;
/* len == -1 is the signal that we need to ascertain the
@@ -876,13 +899,14 @@
/* try QAS requests; this should be harmless to set if the
* target supports it */
- if (scsi_device_qas(sdev) && spi_max_qas(starget)) {
+ if (spi_support_qas(starget) && spi_max_qas(starget)) {
DV_SET(qas, 1);
} else {
DV_SET(qas, 0);
}
- if (scsi_device_ius(sdev) && spi_max_iu(starget) && min_period < 9) {
+ if (spi_support_ius(starget) && spi_max_iu(starget) &&
+ min_period < 9) {
/* This u320 (or u640). Set IU transfers */
DV_SET(iu, 1);
/* Then set the optional parameters */
@@ -902,7 +926,7 @@
i->f->get_signalling(shost);
if (spi_signalling(shost) == SPI_SIGNAL_SE ||
spi_signalling(shost) == SPI_SIGNAL_HVD ||
- !scsi_device_dt(sdev)) {
+ !spi_support_dt(starget)) {
DV_SET(dt, 0);
} else {
DV_SET(dt, 1);
@@ -1523,7 +1547,21 @@
static __init int spi_transport_init(void)
{
- int error = transport_class_register(&spi_transport_class);
+ int error = scsi_dev_info_add_list(SCSI_DEVINFO_SPI,
+ "SCSI Parallel Transport Class");
+ if (!error) {
+ int i;
+
+ for (i = 0; spi_static_device_list[i].vendor; i++)
+ scsi_dev_info_list_add_keyed(1, /* compatible */
+ spi_static_device_list[i].vendor,
+ spi_static_device_list[i].model,
+ NULL,
+ spi_static_device_list[i].flags,
+ SCSI_DEVINFO_SPI);
+ }
+
+ error = transport_class_register(&spi_transport_class);
if (error)
return error;
error = anon_transport_class_register(&spi_device_class);
@@ -1535,6 +1573,7 @@
transport_class_unregister(&spi_transport_class);
anon_transport_class_unregister(&spi_device_class);
transport_class_unregister(&spi_host_class);
+ scsi_dev_info_remove_list(SCSI_DEVINFO_SPI);
}
MODULE_AUTHOR("Martin Hicks");
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 878b17a..5616cd7 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -1307,6 +1307,7 @@
int sense_valid = 0;
int the_result;
int retries = 3;
+ unsigned int alignment;
unsigned long long lba;
unsigned sector_size;
@@ -1358,6 +1359,16 @@
return -EOVERFLOW;
}
+ /* Logical blocks per physical block exponent */
+ sdkp->hw_sector_size = (1 << (buffer[13] & 0xf)) * sector_size;
+
+ /* Lowest aligned logical block */
+ alignment = ((buffer[14] & 0x3f) << 8 | buffer[15]) * sector_size;
+ blk_queue_alignment_offset(sdp->request_queue, alignment);
+ if (alignment && sdkp->first_scan)
+ sd_printk(KERN_NOTICE, sdkp,
+ "physical block alignment offset: %u\n", alignment);
+
sdkp->capacity = lba + 1;
return sector_size;
}
@@ -1409,6 +1420,7 @@
}
sdkp->capacity = lba + 1;
+ sdkp->hw_sector_size = sector_size;
return sector_size;
}
@@ -1521,11 +1533,17 @@
string_get_size(sz, STRING_UNITS_10, cap_str_10,
sizeof(cap_str_10));
- if (sdkp->first_scan || old_capacity != sdkp->capacity)
+ if (sdkp->first_scan || old_capacity != sdkp->capacity) {
sd_printk(KERN_NOTICE, sdkp,
- "%llu %d-byte hardware sectors: (%s/%s)\n",
+ "%llu %d-byte logical blocks: (%s/%s)\n",
(unsigned long long)sdkp->capacity,
sector_size, cap_str_10, cap_str_2);
+
+ if (sdkp->hw_sector_size != sector_size)
+ sd_printk(KERN_NOTICE, sdkp,
+ "%u-byte physical blocks\n",
+ sdkp->hw_sector_size);
+ }
}
/* Rescale capacity to 512-byte units */
@@ -1538,6 +1556,7 @@
else if (sector_size == 256)
sdkp->capacity >>= 1;
+ blk_queue_physical_block_size(sdp->request_queue, sdkp->hw_sector_size);
sdkp->device->sector_size = sector_size;
}
@@ -1776,6 +1795,52 @@
}
/**
+ * sd_read_block_limits - Query disk device for preferred I/O sizes.
+ * @disk: disk to query
+ */
+static void sd_read_block_limits(struct scsi_disk *sdkp)
+{
+ unsigned int sector_sz = sdkp->device->sector_size;
+ char *buffer;
+
+ /* Block Limits VPD */
+ buffer = scsi_get_vpd_page(sdkp->device, 0xb0);
+
+ if (buffer == NULL)
+ return;
+
+ blk_queue_io_min(sdkp->disk->queue,
+ get_unaligned_be16(&buffer[6]) * sector_sz);
+ blk_queue_io_opt(sdkp->disk->queue,
+ get_unaligned_be32(&buffer[12]) * sector_sz);
+
+ kfree(buffer);
+}
+
+/**
+ * sd_read_block_characteristics - Query block dev. characteristics
+ * @disk: disk to query
+ */
+static void sd_read_block_characteristics(struct scsi_disk *sdkp)
+{
+ char *buffer;
+ u16 rot;
+
+ /* Block Device Characteristics VPD */
+ buffer = scsi_get_vpd_page(sdkp->device, 0xb1);
+
+ if (buffer == NULL)
+ return;
+
+ rot = get_unaligned_be16(&buffer[4]);
+
+ if (rot == 1)
+ queue_flag_set_unlocked(QUEUE_FLAG_NONROT, sdkp->disk->queue);
+
+ kfree(buffer);
+}
+
+/**
* sd_revalidate_disk - called the first time a new disk is seen,
* performs disk spin up, read_capacity, etc.
* @disk: struct gendisk we care about
@@ -1812,6 +1877,8 @@
*/
if (sdkp->media_present) {
sd_read_capacity(sdkp, buffer);
+ sd_read_block_limits(sdkp);
+ sd_read_block_characteristics(sdkp);
sd_read_write_protect_flag(sdkp, buffer);
sd_read_cache_type(sdkp, buffer);
sd_read_app_tag_own(sdkp, buffer);
@@ -1934,6 +2001,8 @@
add_disk(gd);
sd_dif_config_host(sdkp);
+ sd_revalidate_disk(gd);
+
sd_printk(KERN_NOTICE, sdkp, "Attached SCSI %sdisk\n",
sdp->removable ? "removable " : "");
}
@@ -2054,6 +2123,7 @@
async_synchronize_full();
sdkp = dev_get_drvdata(dev);
+ blk_queue_prep_rq(sdkp->device->request_queue, scsi_prep_fn);
device_del(&sdkp->dev);
del_gendisk(sdkp->disk);
sd_shutdown(dev);
diff --git a/drivers/scsi/sd.h b/drivers/scsi/sd.h
index 708778c..8474b5ba 100644
--- a/drivers/scsi/sd.h
+++ b/drivers/scsi/sd.h
@@ -45,6 +45,7 @@
unsigned int openers; /* protected by BKL for now, yuck */
sector_t capacity; /* size in 512-byte sectors */
u32 index;
+ unsigned short hw_sector_size;
u8 media_present;
u8 write_prot;
u8 protection_type;/* Data Integrity Field */
diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c
index cd350dfc..cce0fe4 100644
--- a/drivers/scsi/sr.c
+++ b/drivers/scsi/sr.c
@@ -881,6 +881,7 @@
{
struct scsi_cd *cd = dev_get_drvdata(dev);
+ blk_queue_prep_rq(cd->device->request_queue, scsi_prep_fn);
del_gendisk(cd->disk);
mutex_lock(&sr_ref_mutex);
diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.c b/drivers/scsi/sym53c8xx_2/sym_hipd.c
index 69ad494..297deb8 100644
--- a/drivers/scsi/sym53c8xx_2/sym_hipd.c
+++ b/drivers/scsi/sym53c8xx_2/sym_hipd.c
@@ -2321,8 +2321,9 @@
int phase = cmd & 7;
struct sym_ccb *cp = sym_ccb_from_dsa(np, dsa);
- printf("%s: SCSI parity error detected: SCR1=%d DBC=%x SBCL=%x\n",
- sym_name(np), hsts, dbc, sbcl);
+ if (printk_ratelimit())
+ printf("%s: SCSI parity error detected: SCR1=%d DBC=%x SBCL=%x\n",
+ sym_name(np), hsts, dbc, sbcl);
/*
* Check that the chip is connected to the SCSI BUS.
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index e371a9c..a07015d 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -398,8 +398,7 @@
{
u8 __iomem *p;
- p = ioremap_nocache(pci_resource_start(dev, 0),
- pci_resource_len(dev, 0));
+ p = pci_ioremap_bar(dev, 0);
if (p == NULL)
return -ENOMEM;
@@ -423,8 +422,7 @@
{
u8 __iomem *p;
- p = ioremap_nocache(pci_resource_start(dev, 0),
- pci_resource_len(dev, 0));
+ p = pci_ioremap_bar(dev, 0);
/* FIXME: What if resource_len < OCT_REG_CR_OFF */
if (p != NULL)
writeb(0, p + OCT_REG_CR_OFF);
diff --git a/drivers/serial/icom.c b/drivers/serial/icom.c
index 9f2891c..cd1b6a4 100644
--- a/drivers/serial/icom.c
+++ b/drivers/serial/icom.c
@@ -1548,8 +1548,7 @@
goto probe_exit1;
}
- icom_adapter->base_addr = ioremap(icom_adapter->base_addr_pci,
- pci_resource_len(dev, 0));
+ icom_adapter->base_addr = pci_ioremap_bar(dev, 0);
if (!icom_adapter->base_addr)
goto probe_exit1;
diff --git a/drivers/serial/jsm/jsm_tty.c b/drivers/serial/jsm/jsm_tty.c
index 107ce2e1..00f4577 100644
--- a/drivers/serial/jsm/jsm_tty.c
+++ b/drivers/serial/jsm/jsm_tty.c
@@ -467,7 +467,7 @@
printk(KERN_INFO "jsm: linemap is full, added device failed\n");
continue;
} else
- set_bit((int)line, linemap);
+ set_bit(line, linemap);
brd->channels[i]->uart_port.line = line;
if (uart_add_one_port (&jsm_uart_driver, &brd->channels[i]->uart_port))
printk(KERN_INFO "jsm: add device failed\n");
@@ -503,7 +503,7 @@
ch = brd->channels[i];
- clear_bit((int)(ch->uart_port.line), linemap);
+ clear_bit(ch->uart_port.line, linemap);
uart_remove_one_port(&jsm_uart_driver, &brd->channels[i]->uart_port);
}
diff --git a/drivers/serial/serial_txx9.c b/drivers/serial/serial_txx9.c
index 7313c2e..54dd16d 100644
--- a/drivers/serial/serial_txx9.c
+++ b/drivers/serial/serial_txx9.c
@@ -461,6 +461,94 @@
spin_unlock_irqrestore(&up->port.lock, flags);
}
+#if defined(CONFIG_SERIAL_TXX9_CONSOLE) || (CONFIG_CONSOLE_POLL)
+/*
+ * Wait for transmitter & holding register to empty
+ */
+static void wait_for_xmitr(struct uart_txx9_port *up)
+{
+ unsigned int tmout = 10000;
+
+ /* Wait up to 10ms for the character(s) to be sent. */
+ while (--tmout &&
+ !(sio_in(up, TXX9_SICISR) & TXX9_SICISR_TXALS))
+ udelay(1);
+
+ /* Wait up to 1s for flow control if necessary */
+ if (up->port.flags & UPF_CONS_FLOW) {
+ tmout = 1000000;
+ while (--tmout &&
+ (sio_in(up, TXX9_SICISR) & TXX9_SICISR_CTSS))
+ udelay(1);
+ }
+}
+#endif
+
+#ifdef CONFIG_CONSOLE_POLL
+/*
+ * Console polling routines for writing and reading from the uart while
+ * in an interrupt or debug context.
+ */
+
+static int serial_txx9_get_poll_char(struct uart_port *port)
+{
+ unsigned int ier;
+ unsigned char c;
+ struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+
+ /*
+ * First save the IER then disable the interrupts
+ */
+ ier = sio_in(up, TXX9_SIDICR);
+ sio_out(up, TXX9_SIDICR, 0);
+
+ while (sio_in(up, TXX9_SIDISR) & TXX9_SIDISR_UVALID)
+ ;
+
+ c = sio_in(up, TXX9_SIRFIFO);
+
+ /*
+ * Finally, clear RX interrupt status
+ * and restore the IER
+ */
+ sio_mask(up, TXX9_SIDISR, TXX9_SIDISR_RDIS);
+ sio_out(up, TXX9_SIDICR, ier);
+ return c;
+}
+
+
+static void serial_txx9_put_poll_char(struct uart_port *port, unsigned char c)
+{
+ unsigned int ier;
+ struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+
+ /*
+ * First save the IER then disable the interrupts
+ */
+ ier = sio_in(up, TXX9_SIDICR);
+ sio_out(up, TXX9_SIDICR, 0);
+
+ wait_for_xmitr(up);
+ /*
+ * Send the character out.
+ * If a LF, also do CR...
+ */
+ sio_out(up, TXX9_SITFIFO, c);
+ if (c == 10) {
+ wait_for_xmitr(up);
+ sio_out(up, TXX9_SITFIFO, 13);
+ }
+
+ /*
+ * Finally, wait for transmitter to become empty
+ * and restore the IER
+ */
+ wait_for_xmitr(up);
+ sio_out(up, TXX9_SIDICR, ier);
+}
+
+#endif /* CONFIG_CONSOLE_POLL */
+
static int serial_txx9_startup(struct uart_port *port)
{
struct uart_txx9_port *up = (struct uart_txx9_port *)port;
@@ -781,6 +869,10 @@
.release_port = serial_txx9_release_port,
.request_port = serial_txx9_request_port,
.config_port = serial_txx9_config_port,
+#ifdef CONFIG_CONSOLE_POLL
+ .poll_get_char = serial_txx9_get_poll_char,
+ .poll_put_char = serial_txx9_put_poll_char,
+#endif
};
static struct uart_txx9_port serial_txx9_ports[UART_NR];
@@ -803,27 +895,6 @@
#ifdef CONFIG_SERIAL_TXX9_CONSOLE
-/*
- * Wait for transmitter & holding register to empty
- */
-static inline void wait_for_xmitr(struct uart_txx9_port *up)
-{
- unsigned int tmout = 10000;
-
- /* Wait up to 10ms for the character(s) to be sent. */
- while (--tmout &&
- !(sio_in(up, TXX9_SICISR) & TXX9_SICISR_TXALS))
- udelay(1);
-
- /* Wait up to 1s for flow control if necessary */
- if (up->port.flags & UPF_CONS_FLOW) {
- tmout = 1000000;
- while (--tmout &&
- (sio_in(up, TXX9_SICISR) & TXX9_SICISR_CTSS))
- udelay(1);
- }
-}
-
static void serial_txx9_console_putchar(struct uart_port *port, int ch)
{
struct uart_txx9_port *up = (struct uart_txx9_port *)port;
diff --git a/drivers/staging/octeon/Makefile b/drivers/staging/octeon/Makefile
index 3c839e3..c0a583c 100644
--- a/drivers/staging/octeon/Makefile
+++ b/drivers/staging/octeon/Makefile
@@ -12,7 +12,6 @@
obj-${CONFIG_OCTEON_ETHERNET} := octeon-ethernet.o
octeon-ethernet-objs := ethernet.o
-octeon-ethernet-objs += ethernet-common.o
octeon-ethernet-objs += ethernet-mdio.o
octeon-ethernet-objs += ethernet-mem.o
octeon-ethernet-objs += ethernet-proc.o
diff --git a/drivers/staging/octeon/ethernet-common.c b/drivers/staging/octeon/ethernet-common.c
deleted file mode 100644
index 3e6f5b8..0000000
--- a/drivers/staging/octeon/ethernet-common.c
+++ /dev/null
@@ -1,328 +0,0 @@
-/**********************************************************************
- * Author: Cavium Networks
- *
- * Contact: support@caviumnetworks.com
- * This file is part of the OCTEON SDK
- *
- * Copyright (c) 2003-2007 Cavium Networks
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, Version 2, as
- * published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful, but
- * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
- * NONINFRINGEMENT. See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this file; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- * or visit http://www.gnu.org/licenses/.
- *
- * This file may also be available under a different license from Cavium.
- * Contact Cavium Networks for more information
-**********************************************************************/
-#include <linux/kernel.h>
-#include <linux/mii.h>
-#include <net/dst.h>
-
-#include <asm/atomic.h>
-#include <asm/octeon/octeon.h>
-
-#include "ethernet-defines.h"
-#include "ethernet-tx.h"
-#include "ethernet-mdio.h"
-#include "ethernet-util.h"
-#include "octeon-ethernet.h"
-#include "ethernet-common.h"
-
-#include "cvmx-pip.h"
-#include "cvmx-pko.h"
-#include "cvmx-fau.h"
-#include "cvmx-helper.h"
-
-#include "cvmx-gmxx-defs.h"
-
-/**
- * Get the low level ethernet statistics
- *
- * @dev: Device to get the statistics from
- * Returns Pointer to the statistics
- */
-static struct net_device_stats *cvm_oct_common_get_stats(struct net_device *dev)
-{
- cvmx_pip_port_status_t rx_status;
- cvmx_pko_port_status_t tx_status;
- struct octeon_ethernet *priv = netdev_priv(dev);
-
- if (priv->port < CVMX_PIP_NUM_INPUT_PORTS) {
- if (octeon_is_simulation()) {
- /* The simulator doesn't support statistics */
- memset(&rx_status, 0, sizeof(rx_status));
- memset(&tx_status, 0, sizeof(tx_status));
- } else {
- cvmx_pip_get_port_status(priv->port, 1, &rx_status);
- cvmx_pko_get_port_status(priv->port, 1, &tx_status);
- }
-
- priv->stats.rx_packets += rx_status.inb_packets;
- priv->stats.tx_packets += tx_status.packets;
- priv->stats.rx_bytes += rx_status.inb_octets;
- priv->stats.tx_bytes += tx_status.octets;
- priv->stats.multicast += rx_status.multicast_packets;
- priv->stats.rx_crc_errors += rx_status.inb_errors;
- priv->stats.rx_frame_errors += rx_status.fcs_align_err_packets;
-
- /*
- * The drop counter must be incremented atomically
- * since the RX tasklet also increments it.
- */
-#ifdef CONFIG_64BIT
- atomic64_add(rx_status.dropped_packets,
- (atomic64_t *)&priv->stats.rx_dropped);
-#else
- atomic_add(rx_status.dropped_packets,
- (atomic_t *)&priv->stats.rx_dropped);
-#endif
- }
-
- return &priv->stats;
-}
-
-/**
- * Set the multicast list. Currently unimplemented.
- *
- * @dev: Device to work on
- */
-static void cvm_oct_common_set_multicast_list(struct net_device *dev)
-{
- union cvmx_gmxx_prtx_cfg gmx_cfg;
- struct octeon_ethernet *priv = netdev_priv(dev);
- int interface = INTERFACE(priv->port);
- int index = INDEX(priv->port);
-
- if ((interface < 2)
- && (cvmx_helper_interface_get_mode(interface) !=
- CVMX_HELPER_INTERFACE_MODE_SPI)) {
- union cvmx_gmxx_rxx_adr_ctl control;
- control.u64 = 0;
- control.s.bcst = 1; /* Allow broadcast MAC addresses */
-
- if (dev->mc_list || (dev->flags & IFF_ALLMULTI) ||
- (dev->flags & IFF_PROMISC))
- /* Force accept multicast packets */
- control.s.mcst = 2;
- else
- /* Force reject multicat packets */
- control.s.mcst = 1;
-
- if (dev->flags & IFF_PROMISC)
- /*
- * Reject matches if promisc. Since CAM is
- * shut off, should accept everything.
- */
- control.s.cam_mode = 0;
- else
- /* Filter packets based on the CAM */
- control.s.cam_mode = 1;
-
- gmx_cfg.u64 =
- cvmx_read_csr(CVMX_GMXX_PRTX_CFG(index, interface));
- cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface),
- gmx_cfg.u64 & ~1ull);
-
- cvmx_write_csr(CVMX_GMXX_RXX_ADR_CTL(index, interface),
- control.u64);
- if (dev->flags & IFF_PROMISC)
- cvmx_write_csr(CVMX_GMXX_RXX_ADR_CAM_EN
- (index, interface), 0);
- else
- cvmx_write_csr(CVMX_GMXX_RXX_ADR_CAM_EN
- (index, interface), 1);
-
- cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface),
- gmx_cfg.u64);
- }
-}
-
-/**
- * Set the hardware MAC address for a device
- *
- * @dev: Device to change the MAC address for
- * @addr: Address structure to change it too. MAC address is addr + 2.
- * Returns Zero on success
- */
-static int cvm_oct_common_set_mac_address(struct net_device *dev, void *addr)
-{
- struct octeon_ethernet *priv = netdev_priv(dev);
- union cvmx_gmxx_prtx_cfg gmx_cfg;
- int interface = INTERFACE(priv->port);
- int index = INDEX(priv->port);
-
- memcpy(dev->dev_addr, addr + 2, 6);
-
- if ((interface < 2)
- && (cvmx_helper_interface_get_mode(interface) !=
- CVMX_HELPER_INTERFACE_MODE_SPI)) {
- int i;
- uint8_t *ptr = addr;
- uint64_t mac = 0;
- for (i = 0; i < 6; i++)
- mac = (mac << 8) | (uint64_t) (ptr[i + 2]);
-
- gmx_cfg.u64 =
- cvmx_read_csr(CVMX_GMXX_PRTX_CFG(index, interface));
- cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface),
- gmx_cfg.u64 & ~1ull);
-
- cvmx_write_csr(CVMX_GMXX_SMACX(index, interface), mac);
- cvmx_write_csr(CVMX_GMXX_RXX_ADR_CAM0(index, interface),
- ptr[2]);
- cvmx_write_csr(CVMX_GMXX_RXX_ADR_CAM1(index, interface),
- ptr[3]);
- cvmx_write_csr(CVMX_GMXX_RXX_ADR_CAM2(index, interface),
- ptr[4]);
- cvmx_write_csr(CVMX_GMXX_RXX_ADR_CAM3(index, interface),
- ptr[5]);
- cvmx_write_csr(CVMX_GMXX_RXX_ADR_CAM4(index, interface),
- ptr[6]);
- cvmx_write_csr(CVMX_GMXX_RXX_ADR_CAM5(index, interface),
- ptr[7]);
- cvm_oct_common_set_multicast_list(dev);
- cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface),
- gmx_cfg.u64);
- }
- return 0;
-}
-
-/**
- * Change the link MTU. Unimplemented
- *
- * @dev: Device to change
- * @new_mtu: The new MTU
- *
- * Returns Zero on success
- */
-static int cvm_oct_common_change_mtu(struct net_device *dev, int new_mtu)
-{
- struct octeon_ethernet *priv = netdev_priv(dev);
- int interface = INTERFACE(priv->port);
- int index = INDEX(priv->port);
-#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
- int vlan_bytes = 4;
-#else
- int vlan_bytes = 0;
-#endif
-
- /*
- * Limit the MTU to make sure the ethernet packets are between
- * 64 bytes and 65535 bytes.
- */
- if ((new_mtu + 14 + 4 + vlan_bytes < 64)
- || (new_mtu + 14 + 4 + vlan_bytes > 65392)) {
- pr_err("MTU must be between %d and %d.\n",
- 64 - 14 - 4 - vlan_bytes, 65392 - 14 - 4 - vlan_bytes);
- return -EINVAL;
- }
- dev->mtu = new_mtu;
-
- if ((interface < 2)
- && (cvmx_helper_interface_get_mode(interface) !=
- CVMX_HELPER_INTERFACE_MODE_SPI)) {
- /* Add ethernet header and FCS, and VLAN if configured. */
- int max_packet = new_mtu + 14 + 4 + vlan_bytes;
-
- if (OCTEON_IS_MODEL(OCTEON_CN3XXX)
- || OCTEON_IS_MODEL(OCTEON_CN58XX)) {
- /* Signal errors on packets larger than the MTU */
- cvmx_write_csr(CVMX_GMXX_RXX_FRM_MAX(index, interface),
- max_packet);
- } else {
- /*
- * Set the hardware to truncate packets larger
- * than the MTU and smaller the 64 bytes.
- */
- union cvmx_pip_frm_len_chkx frm_len_chk;
- frm_len_chk.u64 = 0;
- frm_len_chk.s.minlen = 64;
- frm_len_chk.s.maxlen = max_packet;
- cvmx_write_csr(CVMX_PIP_FRM_LEN_CHKX(interface),
- frm_len_chk.u64);
- }
- /*
- * Set the hardware to truncate packets larger than
- * the MTU. The jabber register must be set to a
- * multiple of 8 bytes, so round up.
- */
- cvmx_write_csr(CVMX_GMXX_RXX_JABBER(index, interface),
- (max_packet + 7) & ~7u);
- }
- return 0;
-}
-
-/**
- * Per network device initialization
- *
- * @dev: Device to initialize
- * Returns Zero on success
- */
-int cvm_oct_common_init(struct net_device *dev)
-{
- static int count;
- char mac[8] = { 0x00, 0x00,
- octeon_bootinfo->mac_addr_base[0],
- octeon_bootinfo->mac_addr_base[1],
- octeon_bootinfo->mac_addr_base[2],
- octeon_bootinfo->mac_addr_base[3],
- octeon_bootinfo->mac_addr_base[4],
- octeon_bootinfo->mac_addr_base[5] + count
- };
- struct octeon_ethernet *priv = netdev_priv(dev);
-
- /*
- * Force the interface to use the POW send if always_use_pow
- * was specified or it is in the pow send list.
- */
- if ((pow_send_group != -1)
- && (always_use_pow || strstr(pow_send_list, dev->name)))
- priv->queue = -1;
-
- if (priv->queue != -1) {
- dev->hard_start_xmit = cvm_oct_xmit;
- if (USE_HW_TCPUDP_CHECKSUM)
- dev->features |= NETIF_F_IP_CSUM;
- } else
- dev->hard_start_xmit = cvm_oct_xmit_pow;
- count++;
-
- dev->get_stats = cvm_oct_common_get_stats;
- dev->set_mac_address = cvm_oct_common_set_mac_address;
- dev->set_multicast_list = cvm_oct_common_set_multicast_list;
- dev->change_mtu = cvm_oct_common_change_mtu;
- dev->do_ioctl = cvm_oct_ioctl;
- /* We do our own locking, Linux doesn't need to */
- dev->features |= NETIF_F_LLTX;
- SET_ETHTOOL_OPS(dev, &cvm_oct_ethtool_ops);
-#ifdef CONFIG_NET_POLL_CONTROLLER
- dev->poll_controller = cvm_oct_poll_controller;
-#endif
-
- cvm_oct_mdio_setup_device(dev);
- dev->set_mac_address(dev, mac);
- dev->change_mtu(dev, dev->mtu);
-
- /*
- * Zero out stats for port so we won't mistakenly show
- * counters from the bootloader.
- */
- memset(dev->get_stats(dev), 0, sizeof(struct net_device_stats));
-
- return 0;
-}
-
-void cvm_oct_common_uninit(struct net_device *dev)
-{
- /* Currently nothing to do */
-}
diff --git a/drivers/staging/octeon/ethernet-common.h b/drivers/staging/octeon/ethernet-common.h
deleted file mode 100644
index 2bd9cd7..0000000
--- a/drivers/staging/octeon/ethernet-common.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*********************************************************************
- * Author: Cavium Networks
- *
- * Contact: support@caviumnetworks.com
- * This file is part of the OCTEON SDK
- *
- * Copyright (c) 2003-2007 Cavium Networks
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, Version 2, as
- * published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful, but
- * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
- * NONINFRINGEMENT. See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this file; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- * or visit http://www.gnu.org/licenses/.
- *
- * This file may also be available under a different license from Cavium.
- * Contact Cavium Networks for more information
-*********************************************************************/
-
-int cvm_oct_common_init(struct net_device *dev);
-void cvm_oct_common_uninit(struct net_device *dev);
diff --git a/drivers/staging/octeon/ethernet-defines.h b/drivers/staging/octeon/ethernet-defines.h
index 8f7374e..f13131b0 100644
--- a/drivers/staging/octeon/ethernet-defines.h
+++ b/drivers/staging/octeon/ethernet-defines.h
@@ -117,6 +117,8 @@
/* Maximum number of packets to process per interrupt. */
#define MAX_RX_PACKETS 120
+/* Maximum number of SKBs to try to free per xmit packet. */
+#define MAX_SKB_TO_FREE 10
#define MAX_OUT_QUEUE_DEPTH 1000
#ifndef CONFIG_SMP
diff --git a/drivers/staging/octeon/ethernet-rgmii.c b/drivers/staging/octeon/ethernet-rgmii.c
index 8579f16..8704133 100644
--- a/drivers/staging/octeon/ethernet-rgmii.c
+++ b/drivers/staging/octeon/ethernet-rgmii.c
@@ -33,7 +33,6 @@
#include "ethernet-defines.h"
#include "octeon-ethernet.h"
-#include "ethernet-common.h"
#include "ethernet-util.h"
#include "cvmx-helper.h"
@@ -265,7 +264,7 @@
return return_status;
}
-static int cvm_oct_rgmii_open(struct net_device *dev)
+int cvm_oct_rgmii_open(struct net_device *dev)
{
union cvmx_gmxx_prtx_cfg gmx_cfg;
struct octeon_ethernet *priv = netdev_priv(dev);
@@ -286,7 +285,7 @@
return 0;
}
-static int cvm_oct_rgmii_stop(struct net_device *dev)
+int cvm_oct_rgmii_stop(struct net_device *dev)
{
union cvmx_gmxx_prtx_cfg gmx_cfg;
struct octeon_ethernet *priv = netdev_priv(dev);
@@ -305,9 +304,7 @@
int r;
cvm_oct_common_init(dev);
- dev->open = cvm_oct_rgmii_open;
- dev->stop = cvm_oct_rgmii_stop;
- dev->stop(dev);
+ dev->netdev_ops->ndo_stop(dev);
/*
* Due to GMX errata in CN3XXX series chips, it is necessary
diff --git a/drivers/staging/octeon/ethernet-sgmii.c b/drivers/staging/octeon/ethernet-sgmii.c
index 58fa39c1..2b54996bd 100644
--- a/drivers/staging/octeon/ethernet-sgmii.c
+++ b/drivers/staging/octeon/ethernet-sgmii.c
@@ -34,13 +34,12 @@
#include "ethernet-defines.h"
#include "octeon-ethernet.h"
#include "ethernet-util.h"
-#include "ethernet-common.h"
#include "cvmx-helper.h"
#include "cvmx-gmxx-defs.h"
-static int cvm_oct_sgmii_open(struct net_device *dev)
+int cvm_oct_sgmii_open(struct net_device *dev)
{
union cvmx_gmxx_prtx_cfg gmx_cfg;
struct octeon_ethernet *priv = netdev_priv(dev);
@@ -61,7 +60,7 @@
return 0;
}
-static int cvm_oct_sgmii_stop(struct net_device *dev)
+int cvm_oct_sgmii_stop(struct net_device *dev)
{
union cvmx_gmxx_prtx_cfg gmx_cfg;
struct octeon_ethernet *priv = netdev_priv(dev);
@@ -113,9 +112,7 @@
{
struct octeon_ethernet *priv = netdev_priv(dev);
cvm_oct_common_init(dev);
- dev->open = cvm_oct_sgmii_open;
- dev->stop = cvm_oct_sgmii_stop;
- dev->stop(dev);
+ dev->netdev_ops->ndo_stop(dev);
if (!octeon_is_simulation())
priv->poll = cvm_oct_sgmii_poll;
diff --git a/drivers/staging/octeon/ethernet-spi.c b/drivers/staging/octeon/ethernet-spi.c
index e0971bb..66190b0 100644
--- a/drivers/staging/octeon/ethernet-spi.c
+++ b/drivers/staging/octeon/ethernet-spi.c
@@ -33,7 +33,6 @@
#include "ethernet-defines.h"
#include "octeon-ethernet.h"
-#include "ethernet-common.h"
#include "ethernet-util.h"
#include "cvmx-spi.h"
diff --git a/drivers/staging/octeon/ethernet-tx.c b/drivers/staging/octeon/ethernet-tx.c
index 77b7122..81a8513 100644
--- a/drivers/staging/octeon/ethernet-tx.c
+++ b/drivers/staging/octeon/ethernet-tx.c
@@ -47,6 +47,7 @@
#include "ethernet-defines.h"
#include "octeon-ethernet.h"
+#include "ethernet-tx.h"
#include "ethernet-util.h"
#include "cvmx-wqe.h"
@@ -82,8 +83,10 @@
uint64_t old_scratch2;
int dropped;
int qos;
+ int queue_it_up;
struct octeon_ethernet *priv = netdev_priv(dev);
- int32_t in_use;
+ int32_t skb_to_free;
+ int32_t undo;
int32_t buffers_to_free;
#if REUSE_SKBUFFS_WITHOUT_FREE
unsigned char *fpa_head;
@@ -120,15 +123,15 @@
old_scratch2 = cvmx_scratch_read64(CVMX_SCR_SCRATCH + 8);
/*
- * Assume we're going to be able t osend this
- * packet. Fetch and increment the number of pending
- * packets for output.
+ * Fetch and increment the number of packets to be
+ * freed.
*/
cvmx_fau_async_fetch_and_add32(CVMX_SCR_SCRATCH + 8,
FAU_NUM_PACKET_BUFFERS_TO_FREE,
0);
cvmx_fau_async_fetch_and_add32(CVMX_SCR_SCRATCH,
- priv->fau + qos * 4, 1);
+ priv->fau + qos * 4,
+ MAX_SKB_TO_FREE);
}
/*
@@ -253,10 +256,10 @@
/*
* The skbuff will be reused without ever being freed. We must
- * cleanup a bunch of Linux stuff.
+ * cleanup a bunch of core things.
*/
- dst_release(skb->dst);
- skb->dst = NULL;
+ dst_release(skb_dst(skb));
+ skb_dst_set(skb, NULL);
#ifdef CONFIG_XFRM
secpath_put(skb->sp);
skb->sp = NULL;
@@ -286,16 +289,30 @@
if (USE_ASYNC_IOBDMA) {
/* Get the number of skbuffs in use by the hardware */
CVMX_SYNCIOBDMA;
- in_use = cvmx_scratch_read64(CVMX_SCR_SCRATCH);
+ skb_to_free = cvmx_scratch_read64(CVMX_SCR_SCRATCH);
buffers_to_free = cvmx_scratch_read64(CVMX_SCR_SCRATCH + 8);
} else {
/* Get the number of skbuffs in use by the hardware */
- in_use = cvmx_fau_fetch_and_add32(priv->fau + qos * 4, 1);
+ skb_to_free = cvmx_fau_fetch_and_add32(priv->fau + qos * 4,
+ MAX_SKB_TO_FREE);
buffers_to_free =
cvmx_fau_fetch_and_add32(FAU_NUM_PACKET_BUFFERS_TO_FREE, 0);
}
/*
+ * We try to claim MAX_SKB_TO_FREE buffers. If there were not
+ * that many available, we have to un-claim (undo) any that
+ * were in excess. If skb_to_free is positive we will free
+ * that many buffers.
+ */
+ undo = skb_to_free > 0 ?
+ MAX_SKB_TO_FREE : skb_to_free + MAX_SKB_TO_FREE;
+ if (undo > 0)
+ cvmx_fau_atomic_add32(priv->fau+qos*4, -undo);
+ skb_to_free = -skb_to_free > MAX_SKB_TO_FREE ?
+ MAX_SKB_TO_FREE : -skb_to_free;
+
+ /*
* If we're sending faster than the receive can free them then
* don't do the HW free.
*/
@@ -330,38 +347,31 @@
cvmx_scratch_write64(CVMX_SCR_SCRATCH + 8, old_scratch2);
}
+ queue_it_up = 0;
if (unlikely(dropped)) {
dev_kfree_skb_any(skb);
- cvmx_fau_atomic_add32(priv->fau + qos * 4, -1);
priv->stats.tx_dropped++;
} else {
if (USE_SKBUFFS_IN_HW) {
/* Put this packet on the queue to be freed later */
if (pko_command.s.dontfree)
- skb_queue_tail(&priv->tx_free_list[qos], skb);
- else {
+ queue_it_up = 1;
+ else
cvmx_fau_atomic_add32
(FAU_NUM_PACKET_BUFFERS_TO_FREE, -1);
- cvmx_fau_atomic_add32(priv->fau + qos * 4, -1);
- }
} else {
/* Put this packet on the queue to be freed later */
- skb_queue_tail(&priv->tx_free_list[qos], skb);
+ queue_it_up = 1;
}
}
- /* Free skbuffs not in use by the hardware, possibly two at a time */
- if (skb_queue_len(&priv->tx_free_list[qos]) > in_use) {
+ if (queue_it_up) {
spin_lock(&priv->tx_free_list[qos].lock);
- /*
- * Check again now that we have the lock. It might
- * have changed.
- */
- if (skb_queue_len(&priv->tx_free_list[qos]) > in_use)
- dev_kfree_skb(__skb_dequeue(&priv->tx_free_list[qos]));
- if (skb_queue_len(&priv->tx_free_list[qos]) > in_use)
- dev_kfree_skb(__skb_dequeue(&priv->tx_free_list[qos]));
+ __skb_queue_tail(&priv->tx_free_list[qos], skb);
+ cvm_oct_free_tx_skbs(priv, skb_to_free, qos, 0);
spin_unlock(&priv->tx_free_list[qos].lock);
+ } else {
+ cvm_oct_free_tx_skbs(priv, skb_to_free, qos, 1);
}
return 0;
diff --git a/drivers/staging/octeon/ethernet-tx.h b/drivers/staging/octeon/ethernet-tx.h
index 5106236..c0bebf7 100644
--- a/drivers/staging/octeon/ethernet-tx.h
+++ b/drivers/staging/octeon/ethernet-tx.h
@@ -30,3 +30,28 @@
int cvm_oct_transmit_qos(struct net_device *dev, void *work_queue_entry,
int do_free, int qos);
void cvm_oct_tx_shutdown(struct net_device *dev);
+
+/**
+ * Free dead transmit skbs.
+ *
+ * @priv: The driver data
+ * @skb_to_free: The number of SKBs to free (free none if negative).
+ * @qos: The queue to free from.
+ * @take_lock: If true, acquire the skb list lock.
+ */
+static inline void cvm_oct_free_tx_skbs(struct octeon_ethernet *priv,
+ int skb_to_free,
+ int qos, int take_lock)
+{
+ /* Free skbuffs not in use by the hardware. */
+ if (skb_to_free > 0) {
+ if (take_lock)
+ spin_lock(&priv->tx_free_list[qos].lock);
+ while (skb_to_free > 0) {
+ dev_kfree_skb(__skb_dequeue(&priv->tx_free_list[qos]));
+ skb_to_free--;
+ }
+ if (take_lock)
+ spin_unlock(&priv->tx_free_list[qos].lock);
+ }
+}
diff --git a/drivers/staging/octeon/ethernet-xaui.c b/drivers/staging/octeon/ethernet-xaui.c
index f08eb32..0c2e7cc 100644
--- a/drivers/staging/octeon/ethernet-xaui.c
+++ b/drivers/staging/octeon/ethernet-xaui.c
@@ -33,14 +33,13 @@
#include "ethernet-defines.h"
#include "octeon-ethernet.h"
-#include "ethernet-common.h"
#include "ethernet-util.h"
#include "cvmx-helper.h"
#include "cvmx-gmxx-defs.h"
-static int cvm_oct_xaui_open(struct net_device *dev)
+int cvm_oct_xaui_open(struct net_device *dev)
{
union cvmx_gmxx_prtx_cfg gmx_cfg;
struct octeon_ethernet *priv = netdev_priv(dev);
@@ -60,7 +59,7 @@
return 0;
}
-static int cvm_oct_xaui_stop(struct net_device *dev)
+int cvm_oct_xaui_stop(struct net_device *dev)
{
union cvmx_gmxx_prtx_cfg gmx_cfg;
struct octeon_ethernet *priv = netdev_priv(dev);
@@ -112,9 +111,7 @@
{
struct octeon_ethernet *priv = netdev_priv(dev);
cvm_oct_common_init(dev);
- dev->open = cvm_oct_xaui_open;
- dev->stop = cvm_oct_xaui_stop;
- dev->stop(dev);
+ dev->netdev_ops->ndo_stop(dev);
if (!octeon_is_simulation())
priv->poll = cvm_oct_xaui_poll;
diff --git a/drivers/staging/octeon/ethernet.c b/drivers/staging/octeon/ethernet.c
index e8ef9e0b..b847951 100644
--- a/drivers/staging/octeon/ethernet.c
+++ b/drivers/staging/octeon/ethernet.c
@@ -37,13 +37,14 @@
#include <asm/octeon/octeon.h>
#include "ethernet-defines.h"
+#include "octeon-ethernet.h"
#include "ethernet-mem.h"
#include "ethernet-rx.h"
#include "ethernet-tx.h"
+#include "ethernet-mdio.h"
#include "ethernet-util.h"
#include "ethernet-proc.h"
-#include "ethernet-common.h"
-#include "octeon-ethernet.h"
+
#include "cvmx-pip.h"
#include "cvmx-pko.h"
@@ -51,6 +52,7 @@
#include "cvmx-ipd.h"
#include "cvmx-helper.h"
+#include "cvmx-gmxx-defs.h"
#include "cvmx-smix-defs.h"
#if defined(CONFIG_CAVIUM_OCTEON_NUM_PACKET_BUFFERS) \
@@ -129,53 +131,55 @@
*/
static void cvm_do_timer(unsigned long arg)
{
+ int32_t skb_to_free, undo;
+ int queues_per_port;
+ int qos;
+ struct octeon_ethernet *priv;
static int port;
- if (port < CVMX_PIP_NUM_INPUT_PORTS) {
- if (cvm_oct_device[port]) {
- int queues_per_port;
- int qos;
- struct octeon_ethernet *priv =
- netdev_priv(cvm_oct_device[port]);
- if (priv->poll) {
- /* skip polling if we don't get the lock */
- if (!down_trylock(&mdio_sem)) {
- priv->poll(cvm_oct_device[port]);
- up(&mdio_sem);
- }
- }
- queues_per_port = cvmx_pko_get_num_queues(port);
- /* Drain any pending packets in the free list */
- for (qos = 0; qos < queues_per_port; qos++) {
- if (skb_queue_len(&priv->tx_free_list[qos])) {
- spin_lock(&priv->tx_free_list[qos].
- lock);
- while (skb_queue_len
- (&priv->tx_free_list[qos]) >
- cvmx_fau_fetch_and_add32(priv->
- fau +
- qos * 4,
- 0))
- dev_kfree_skb(__skb_dequeue
- (&priv->
- tx_free_list
- [qos]));
- spin_unlock(&priv->tx_free_list[qos].
- lock);
- }
- }
- cvm_oct_device[port]->get_stats(cvm_oct_device[port]);
- }
- port++;
- /* Poll the next port in a 50th of a second.
- This spreads the polling of ports out a little bit */
- mod_timer(&cvm_oct_poll_timer, jiffies + HZ / 50);
- } else {
+ if (port >= CVMX_PIP_NUM_INPUT_PORTS) {
+ /*
+ * All ports have been polled. Start the next
+ * iteration through the ports in one second.
+ */
port = 0;
- /* All ports have been polled. Start the next iteration through
- the ports in one second */
mod_timer(&cvm_oct_poll_timer, jiffies + HZ);
+ return;
}
+ if (!cvm_oct_device[port])
+ goto out;
+
+ priv = netdev_priv(cvm_oct_device[port]);
+ if (priv->poll) {
+ /* skip polling if we don't get the lock */
+ if (!down_trylock(&mdio_sem)) {
+ priv->poll(cvm_oct_device[port]);
+ up(&mdio_sem);
+ }
+ }
+
+ queues_per_port = cvmx_pko_get_num_queues(port);
+ /* Drain any pending packets in the free list */
+ for (qos = 0; qos < queues_per_port; qos++) {
+ if (skb_queue_len(&priv->tx_free_list[qos]) == 0)
+ continue;
+ skb_to_free = cvmx_fau_fetch_and_add32(priv->fau + qos * 4,
+ MAX_SKB_TO_FREE);
+ undo = skb_to_free > 0 ?
+ MAX_SKB_TO_FREE : skb_to_free + MAX_SKB_TO_FREE;
+ if (undo > 0)
+ cvmx_fau_atomic_add32(priv->fau+qos*4, -undo);
+ skb_to_free = -skb_to_free > MAX_SKB_TO_FREE ?
+ MAX_SKB_TO_FREE : -skb_to_free;
+ cvm_oct_free_tx_skbs(priv, skb_to_free, qos, 1);
+ }
+ cvm_oct_device[port]->netdev_ops->ndo_get_stats(cvm_oct_device[port]);
+
+out:
+ port++;
+ /* Poll the next port in a 50th of a second.
+ This spreads the polling of ports out a little bit */
+ mod_timer(&cvm_oct_poll_timer, jiffies + HZ / 50);
}
/**
@@ -246,6 +250,362 @@
EXPORT_SYMBOL(cvm_oct_free_work);
/**
+ * Get the low level ethernet statistics
+ *
+ * @dev: Device to get the statistics from
+ * Returns Pointer to the statistics
+ */
+static struct net_device_stats *cvm_oct_common_get_stats(struct net_device *dev)
+{
+ cvmx_pip_port_status_t rx_status;
+ cvmx_pko_port_status_t tx_status;
+ struct octeon_ethernet *priv = netdev_priv(dev);
+
+ if (priv->port < CVMX_PIP_NUM_INPUT_PORTS) {
+ if (octeon_is_simulation()) {
+ /* The simulator doesn't support statistics */
+ memset(&rx_status, 0, sizeof(rx_status));
+ memset(&tx_status, 0, sizeof(tx_status));
+ } else {
+ cvmx_pip_get_port_status(priv->port, 1, &rx_status);
+ cvmx_pko_get_port_status(priv->port, 1, &tx_status);
+ }
+
+ priv->stats.rx_packets += rx_status.inb_packets;
+ priv->stats.tx_packets += tx_status.packets;
+ priv->stats.rx_bytes += rx_status.inb_octets;
+ priv->stats.tx_bytes += tx_status.octets;
+ priv->stats.multicast += rx_status.multicast_packets;
+ priv->stats.rx_crc_errors += rx_status.inb_errors;
+ priv->stats.rx_frame_errors += rx_status.fcs_align_err_packets;
+
+ /*
+ * The drop counter must be incremented atomically
+ * since the RX tasklet also increments it.
+ */
+#ifdef CONFIG_64BIT
+ atomic64_add(rx_status.dropped_packets,
+ (atomic64_t *)&priv->stats.rx_dropped);
+#else
+ atomic_add(rx_status.dropped_packets,
+ (atomic_t *)&priv->stats.rx_dropped);
+#endif
+ }
+
+ return &priv->stats;
+}
+
+/**
+ * Change the link MTU. Unimplemented
+ *
+ * @dev: Device to change
+ * @new_mtu: The new MTU
+ *
+ * Returns Zero on success
+ */
+static int cvm_oct_common_change_mtu(struct net_device *dev, int new_mtu)
+{
+ struct octeon_ethernet *priv = netdev_priv(dev);
+ int interface = INTERFACE(priv->port);
+ int index = INDEX(priv->port);
+#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
+ int vlan_bytes = 4;
+#else
+ int vlan_bytes = 0;
+#endif
+
+ /*
+ * Limit the MTU to make sure the ethernet packets are between
+ * 64 bytes and 65535 bytes.
+ */
+ if ((new_mtu + 14 + 4 + vlan_bytes < 64)
+ || (new_mtu + 14 + 4 + vlan_bytes > 65392)) {
+ pr_err("MTU must be between %d and %d.\n",
+ 64 - 14 - 4 - vlan_bytes, 65392 - 14 - 4 - vlan_bytes);
+ return -EINVAL;
+ }
+ dev->mtu = new_mtu;
+
+ if ((interface < 2)
+ && (cvmx_helper_interface_get_mode(interface) !=
+ CVMX_HELPER_INTERFACE_MODE_SPI)) {
+ /* Add ethernet header and FCS, and VLAN if configured. */
+ int max_packet = new_mtu + 14 + 4 + vlan_bytes;
+
+ if (OCTEON_IS_MODEL(OCTEON_CN3XXX)
+ || OCTEON_IS_MODEL(OCTEON_CN58XX)) {
+ /* Signal errors on packets larger than the MTU */
+ cvmx_write_csr(CVMX_GMXX_RXX_FRM_MAX(index, interface),
+ max_packet);
+ } else {
+ /*
+ * Set the hardware to truncate packets larger
+ * than the MTU and smaller the 64 bytes.
+ */
+ union cvmx_pip_frm_len_chkx frm_len_chk;
+ frm_len_chk.u64 = 0;
+ frm_len_chk.s.minlen = 64;
+ frm_len_chk.s.maxlen = max_packet;
+ cvmx_write_csr(CVMX_PIP_FRM_LEN_CHKX(interface),
+ frm_len_chk.u64);
+ }
+ /*
+ * Set the hardware to truncate packets larger than
+ * the MTU. The jabber register must be set to a
+ * multiple of 8 bytes, so round up.
+ */
+ cvmx_write_csr(CVMX_GMXX_RXX_JABBER(index, interface),
+ (max_packet + 7) & ~7u);
+ }
+ return 0;
+}
+
+/**
+ * Set the multicast list. Currently unimplemented.
+ *
+ * @dev: Device to work on
+ */
+static void cvm_oct_common_set_multicast_list(struct net_device *dev)
+{
+ union cvmx_gmxx_prtx_cfg gmx_cfg;
+ struct octeon_ethernet *priv = netdev_priv(dev);
+ int interface = INTERFACE(priv->port);
+ int index = INDEX(priv->port);
+
+ if ((interface < 2)
+ && (cvmx_helper_interface_get_mode(interface) !=
+ CVMX_HELPER_INTERFACE_MODE_SPI)) {
+ union cvmx_gmxx_rxx_adr_ctl control;
+ control.u64 = 0;
+ control.s.bcst = 1; /* Allow broadcast MAC addresses */
+
+ if (dev->mc_list || (dev->flags & IFF_ALLMULTI) ||
+ (dev->flags & IFF_PROMISC))
+ /* Force accept multicast packets */
+ control.s.mcst = 2;
+ else
+ /* Force reject multicat packets */
+ control.s.mcst = 1;
+
+ if (dev->flags & IFF_PROMISC)
+ /*
+ * Reject matches if promisc. Since CAM is
+ * shut off, should accept everything.
+ */
+ control.s.cam_mode = 0;
+ else
+ /* Filter packets based on the CAM */
+ control.s.cam_mode = 1;
+
+ gmx_cfg.u64 =
+ cvmx_read_csr(CVMX_GMXX_PRTX_CFG(index, interface));
+ cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface),
+ gmx_cfg.u64 & ~1ull);
+
+ cvmx_write_csr(CVMX_GMXX_RXX_ADR_CTL(index, interface),
+ control.u64);
+ if (dev->flags & IFF_PROMISC)
+ cvmx_write_csr(CVMX_GMXX_RXX_ADR_CAM_EN
+ (index, interface), 0);
+ else
+ cvmx_write_csr(CVMX_GMXX_RXX_ADR_CAM_EN
+ (index, interface), 1);
+
+ cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface),
+ gmx_cfg.u64);
+ }
+}
+
+/**
+ * Set the hardware MAC address for a device
+ *
+ * @dev: Device to change the MAC address for
+ * @addr: Address structure to change it too. MAC address is addr + 2.
+ * Returns Zero on success
+ */
+static int cvm_oct_common_set_mac_address(struct net_device *dev, void *addr)
+{
+ struct octeon_ethernet *priv = netdev_priv(dev);
+ union cvmx_gmxx_prtx_cfg gmx_cfg;
+ int interface = INTERFACE(priv->port);
+ int index = INDEX(priv->port);
+
+ memcpy(dev->dev_addr, addr + 2, 6);
+
+ if ((interface < 2)
+ && (cvmx_helper_interface_get_mode(interface) !=
+ CVMX_HELPER_INTERFACE_MODE_SPI)) {
+ int i;
+ uint8_t *ptr = addr;
+ uint64_t mac = 0;
+ for (i = 0; i < 6; i++)
+ mac = (mac << 8) | (uint64_t) (ptr[i + 2]);
+
+ gmx_cfg.u64 =
+ cvmx_read_csr(CVMX_GMXX_PRTX_CFG(index, interface));
+ cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface),
+ gmx_cfg.u64 & ~1ull);
+
+ cvmx_write_csr(CVMX_GMXX_SMACX(index, interface), mac);
+ cvmx_write_csr(CVMX_GMXX_RXX_ADR_CAM0(index, interface),
+ ptr[2]);
+ cvmx_write_csr(CVMX_GMXX_RXX_ADR_CAM1(index, interface),
+ ptr[3]);
+ cvmx_write_csr(CVMX_GMXX_RXX_ADR_CAM2(index, interface),
+ ptr[4]);
+ cvmx_write_csr(CVMX_GMXX_RXX_ADR_CAM3(index, interface),
+ ptr[5]);
+ cvmx_write_csr(CVMX_GMXX_RXX_ADR_CAM4(index, interface),
+ ptr[6]);
+ cvmx_write_csr(CVMX_GMXX_RXX_ADR_CAM5(index, interface),
+ ptr[7]);
+ cvm_oct_common_set_multicast_list(dev);
+ cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface),
+ gmx_cfg.u64);
+ }
+ return 0;
+}
+
+/**
+ * Per network device initialization
+ *
+ * @dev: Device to initialize
+ * Returns Zero on success
+ */
+int cvm_oct_common_init(struct net_device *dev)
+{
+ static int count;
+ char mac[8] = { 0x00, 0x00,
+ octeon_bootinfo->mac_addr_base[0],
+ octeon_bootinfo->mac_addr_base[1],
+ octeon_bootinfo->mac_addr_base[2],
+ octeon_bootinfo->mac_addr_base[3],
+ octeon_bootinfo->mac_addr_base[4],
+ octeon_bootinfo->mac_addr_base[5] + count
+ };
+ struct octeon_ethernet *priv = netdev_priv(dev);
+
+ /*
+ * Force the interface to use the POW send if always_use_pow
+ * was specified or it is in the pow send list.
+ */
+ if ((pow_send_group != -1)
+ && (always_use_pow || strstr(pow_send_list, dev->name)))
+ priv->queue = -1;
+
+ if (priv->queue != -1 && USE_HW_TCPUDP_CHECKSUM)
+ dev->features |= NETIF_F_IP_CSUM;
+
+ count++;
+
+ /* We do our own locking, Linux doesn't need to */
+ dev->features |= NETIF_F_LLTX;
+ SET_ETHTOOL_OPS(dev, &cvm_oct_ethtool_ops);
+
+ cvm_oct_mdio_setup_device(dev);
+ dev->netdev_ops->ndo_set_mac_address(dev, mac);
+ dev->netdev_ops->ndo_change_mtu(dev, dev->mtu);
+
+ /*
+ * Zero out stats for port so we won't mistakenly show
+ * counters from the bootloader.
+ */
+ memset(dev->netdev_ops->ndo_get_stats(dev), 0,
+ sizeof(struct net_device_stats));
+
+ return 0;
+}
+
+void cvm_oct_common_uninit(struct net_device *dev)
+{
+ /* Currently nothing to do */
+}
+
+static const struct net_device_ops cvm_oct_npi_netdev_ops = {
+ .ndo_init = cvm_oct_common_init,
+ .ndo_uninit = cvm_oct_common_uninit,
+ .ndo_start_xmit = cvm_oct_xmit,
+ .ndo_set_multicast_list = cvm_oct_common_set_multicast_list,
+ .ndo_set_mac_address = cvm_oct_common_set_mac_address,
+ .ndo_do_ioctl = cvm_oct_ioctl,
+ .ndo_change_mtu = cvm_oct_common_change_mtu,
+ .ndo_get_stats = cvm_oct_common_get_stats,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = cvm_oct_poll_controller,
+#endif
+};
+static const struct net_device_ops cvm_oct_xaui_netdev_ops = {
+ .ndo_init = cvm_oct_xaui_init,
+ .ndo_uninit = cvm_oct_xaui_uninit,
+ .ndo_open = cvm_oct_xaui_open,
+ .ndo_stop = cvm_oct_xaui_stop,
+ .ndo_start_xmit = cvm_oct_xmit,
+ .ndo_set_multicast_list = cvm_oct_common_set_multicast_list,
+ .ndo_set_mac_address = cvm_oct_common_set_mac_address,
+ .ndo_do_ioctl = cvm_oct_ioctl,
+ .ndo_change_mtu = cvm_oct_common_change_mtu,
+ .ndo_get_stats = cvm_oct_common_get_stats,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = cvm_oct_poll_controller,
+#endif
+};
+static const struct net_device_ops cvm_oct_sgmii_netdev_ops = {
+ .ndo_init = cvm_oct_sgmii_init,
+ .ndo_uninit = cvm_oct_sgmii_uninit,
+ .ndo_open = cvm_oct_sgmii_open,
+ .ndo_stop = cvm_oct_sgmii_stop,
+ .ndo_start_xmit = cvm_oct_xmit,
+ .ndo_set_multicast_list = cvm_oct_common_set_multicast_list,
+ .ndo_set_mac_address = cvm_oct_common_set_mac_address,
+ .ndo_do_ioctl = cvm_oct_ioctl,
+ .ndo_change_mtu = cvm_oct_common_change_mtu,
+ .ndo_get_stats = cvm_oct_common_get_stats,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = cvm_oct_poll_controller,
+#endif
+};
+static const struct net_device_ops cvm_oct_spi_netdev_ops = {
+ .ndo_init = cvm_oct_spi_init,
+ .ndo_uninit = cvm_oct_spi_uninit,
+ .ndo_start_xmit = cvm_oct_xmit,
+ .ndo_set_multicast_list = cvm_oct_common_set_multicast_list,
+ .ndo_set_mac_address = cvm_oct_common_set_mac_address,
+ .ndo_do_ioctl = cvm_oct_ioctl,
+ .ndo_change_mtu = cvm_oct_common_change_mtu,
+ .ndo_get_stats = cvm_oct_common_get_stats,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = cvm_oct_poll_controller,
+#endif
+};
+static const struct net_device_ops cvm_oct_rgmii_netdev_ops = {
+ .ndo_init = cvm_oct_rgmii_init,
+ .ndo_uninit = cvm_oct_rgmii_uninit,
+ .ndo_open = cvm_oct_rgmii_open,
+ .ndo_stop = cvm_oct_rgmii_stop,
+ .ndo_start_xmit = cvm_oct_xmit,
+ .ndo_set_multicast_list = cvm_oct_common_set_multicast_list,
+ .ndo_set_mac_address = cvm_oct_common_set_mac_address,
+ .ndo_do_ioctl = cvm_oct_ioctl,
+ .ndo_change_mtu = cvm_oct_common_change_mtu,
+ .ndo_get_stats = cvm_oct_common_get_stats,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = cvm_oct_poll_controller,
+#endif
+};
+static const struct net_device_ops cvm_oct_pow_netdev_ops = {
+ .ndo_init = cvm_oct_common_init,
+ .ndo_start_xmit = cvm_oct_xmit_pow,
+ .ndo_set_multicast_list = cvm_oct_common_set_multicast_list,
+ .ndo_set_mac_address = cvm_oct_common_set_mac_address,
+ .ndo_do_ioctl = cvm_oct_ioctl,
+ .ndo_change_mtu = cvm_oct_common_change_mtu,
+ .ndo_get_stats = cvm_oct_common_get_stats,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = cvm_oct_poll_controller,
+#endif
+};
+
+/**
* Module/ driver initialization. Creates the linux network
* devices.
*
@@ -303,7 +663,7 @@
struct octeon_ethernet *priv = netdev_priv(dev);
memset(priv, 0, sizeof(struct octeon_ethernet));
- dev->init = cvm_oct_common_init;
+ dev->netdev_ops = &cvm_oct_pow_netdev_ops;
priv->imode = CVMX_HELPER_INTERFACE_MODE_DISABLED;
priv->port = CVMX_PIP_NUM_INPUT_PORTS;
priv->queue = -1;
@@ -372,44 +732,38 @@
break;
case CVMX_HELPER_INTERFACE_MODE_NPI:
- dev->init = cvm_oct_common_init;
- dev->uninit = cvm_oct_common_uninit;
+ dev->netdev_ops = &cvm_oct_npi_netdev_ops;
strcpy(dev->name, "npi%d");
break;
case CVMX_HELPER_INTERFACE_MODE_XAUI:
- dev->init = cvm_oct_xaui_init;
- dev->uninit = cvm_oct_xaui_uninit;
+ dev->netdev_ops = &cvm_oct_xaui_netdev_ops;
strcpy(dev->name, "xaui%d");
break;
case CVMX_HELPER_INTERFACE_MODE_LOOP:
- dev->init = cvm_oct_common_init;
- dev->uninit = cvm_oct_common_uninit;
+ dev->netdev_ops = &cvm_oct_npi_netdev_ops;
strcpy(dev->name, "loop%d");
break;
case CVMX_HELPER_INTERFACE_MODE_SGMII:
- dev->init = cvm_oct_sgmii_init;
- dev->uninit = cvm_oct_sgmii_uninit;
+ dev->netdev_ops = &cvm_oct_sgmii_netdev_ops;
strcpy(dev->name, "eth%d");
break;
case CVMX_HELPER_INTERFACE_MODE_SPI:
- dev->init = cvm_oct_spi_init;
- dev->uninit = cvm_oct_spi_uninit;
+ dev->netdev_ops = &cvm_oct_spi_netdev_ops;
strcpy(dev->name, "spi%d");
break;
case CVMX_HELPER_INTERFACE_MODE_RGMII:
case CVMX_HELPER_INTERFACE_MODE_GMII:
- dev->init = cvm_oct_rgmii_init;
- dev->uninit = cvm_oct_rgmii_uninit;
+ dev->netdev_ops = &cvm_oct_rgmii_netdev_ops;
strcpy(dev->name, "eth%d");
break;
}
- if (!dev->init) {
+ if (!dev->netdev_ops) {
kfree(dev);
} else if (register_netdev(dev) < 0) {
pr_err("Failed to register ethernet device "
diff --git a/drivers/staging/octeon/octeon-ethernet.h b/drivers/staging/octeon/octeon-ethernet.h
index b319907..3aef987 100644
--- a/drivers/staging/octeon/octeon-ethernet.h
+++ b/drivers/staging/octeon/octeon-ethernet.h
@@ -111,12 +111,23 @@
extern int cvm_oct_rgmii_init(struct net_device *dev);
extern void cvm_oct_rgmii_uninit(struct net_device *dev);
+extern int cvm_oct_rgmii_open(struct net_device *dev);
+extern int cvm_oct_rgmii_stop(struct net_device *dev);
+
extern int cvm_oct_sgmii_init(struct net_device *dev);
extern void cvm_oct_sgmii_uninit(struct net_device *dev);
+extern int cvm_oct_sgmii_open(struct net_device *dev);
+extern int cvm_oct_sgmii_stop(struct net_device *dev);
+
extern int cvm_oct_spi_init(struct net_device *dev);
extern void cvm_oct_spi_uninit(struct net_device *dev);
extern int cvm_oct_xaui_init(struct net_device *dev);
extern void cvm_oct_xaui_uninit(struct net_device *dev);
+extern int cvm_oct_xaui_open(struct net_device *dev);
+extern int cvm_oct_xaui_stop(struct net_device *dev);
+
+extern int cvm_oct_common_init(struct net_device *dev);
+extern void cvm_oct_common_uninit(struct net_device *dev);
extern int always_use_pow;
extern int pow_send_group;
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 38bfdb0..3f10459 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -550,7 +550,7 @@
static int acm_tty_open(struct tty_struct *tty, struct file *filp)
{
struct acm *acm;
- int rv = -EINVAL;
+ int rv = -ENODEV;
int i;
dbg("Entering acm_tty_open.");
@@ -677,7 +677,7 @@
/* Perform the closing process and see if we need to do the hardware
shutdown */
- if (tty_port_close_start(&acm->port, tty, filp) == 0)
+ if (!acm || tty_port_close_start(&acm->port, tty, filp) == 0)
return;
acm_port_down(acm, 0);
tty_port_close_end(&acm->port, tty);
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index d595aa5..a842164 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -333,6 +333,9 @@
{
struct usb_serial_port *port = tty->driver_data;
+ if (!port)
+ return;
+
dbg("%s - port %d", __func__, port->number);
diff --git a/drivers/uwb/hwa-rc.c b/drivers/uwb/hwa-rc.c
index 559f878..9052bcb 100644
--- a/drivers/uwb/hwa-rc.c
+++ b/drivers/uwb/hwa-rc.c
@@ -501,7 +501,7 @@
int result = -ENOANO;
struct uwb_rceb *rceb = *header;
int event = le16_to_cpu(rceb->wEvent);
- size_t event_size;
+ ssize_t event_size;
size_t core_size, offset;
if (rceb->bEventType != UWB_RC_CET_GENERAL)
diff --git a/drivers/uwb/wlp/txrx.c b/drivers/uwb/wlp/txrx.c
index cd20357..86a853b 100644
--- a/drivers/uwb/wlp/txrx.c
+++ b/drivers/uwb/wlp/txrx.c
@@ -326,7 +326,7 @@
int result = -EINVAL;
struct ethhdr *eth_hdr = (void *) skb->data;
- if (is_broadcast_ether_addr(eth_hdr->h_dest)) {
+ if (is_multicast_ether_addr(eth_hdr->h_dest)) {
result = wlp_eda_for_each(&wlp->eda, wlp_wss_send_copy, skb);
if (result < 0) {
if (printk_ratelimit())
diff --git a/drivers/video/nvidia/nv_setup.c b/drivers/video/nvidia/nv_setup.c
index 135ae18..eef2bb2 100644
--- a/drivers/video/nvidia/nv_setup.c
+++ b/drivers/video/nvidia/nv_setup.c
@@ -543,8 +543,7 @@
} else if (analog_on_B) {
CRTCnumber = outputBfromCRTC;
FlatPanel = 0;
- printk("nvidiafb: CRTC %i"
- "appears to have a "
+ printk("nvidiafb: CRTC %i appears to have a "
"CRT attached\n", CRTCnumber);
} else if (slaved_on_A) {
CRTCnumber = 0;
diff --git a/drivers/w1/slaves/w1_ds2760.c b/drivers/w1/slaves/w1_ds2760.c
index 1f09d4e..59f708e 100644
--- a/drivers/w1/slaves/w1_ds2760.c
+++ b/drivers/w1/slaves/w1_ds2760.c
@@ -68,6 +68,34 @@
return w1_ds2760_io(dev, buf, addr, count, 1);
}
+static int w1_ds2760_eeprom_cmd(struct device *dev, int addr, int cmd)
+{
+ struct w1_slave *sl = container_of(dev, struct w1_slave, dev);
+
+ if (!dev)
+ return -EINVAL;
+
+ mutex_lock(&sl->master->mutex);
+
+ if (w1_reset_select_slave(sl) == 0) {
+ w1_write_8(sl->master, cmd);
+ w1_write_8(sl->master, addr);
+ }
+
+ mutex_unlock(&sl->master->mutex);
+ return 0;
+}
+
+int w1_ds2760_store_eeprom(struct device *dev, int addr)
+{
+ return w1_ds2760_eeprom_cmd(dev, addr, W1_DS2760_COPY_DATA);
+}
+
+int w1_ds2760_recall_eeprom(struct device *dev, int addr)
+{
+ return w1_ds2760_eeprom_cmd(dev, addr, W1_DS2760_RECALL_DATA);
+}
+
static ssize_t w1_ds2760_read_bin(struct kobject *kobj,
struct bin_attribute *bin_attr,
char *buf, loff_t off, size_t count)
@@ -200,6 +228,8 @@
EXPORT_SYMBOL(w1_ds2760_read);
EXPORT_SYMBOL(w1_ds2760_write);
+EXPORT_SYMBOL(w1_ds2760_store_eeprom);
+EXPORT_SYMBOL(w1_ds2760_recall_eeprom);
module_init(w1_ds2760_init);
module_exit(w1_ds2760_exit);
diff --git a/drivers/w1/slaves/w1_ds2760.h b/drivers/w1/slaves/w1_ds2760.h
index f130242..58e7741 100644
--- a/drivers/w1/slaves/w1_ds2760.h
+++ b/drivers/w1/slaves/w1_ds2760.h
@@ -25,6 +25,10 @@
#define DS2760_PROTECTION_REG 0x00
#define DS2760_STATUS_REG 0x01
+ #define DS2760_STATUS_IE (1 << 2)
+ #define DS2760_STATUS_SWEN (1 << 3)
+ #define DS2760_STATUS_RNAOP (1 << 4)
+ #define DS2760_STATUS_PMOD (1 << 5)
#define DS2760_EEPROM_REG 0x07
#define DS2760_SPECIAL_FEATURE_REG 0x08
#define DS2760_VOLTAGE_MSB 0x0c
@@ -38,6 +42,7 @@
#define DS2760_EEPROM_BLOCK0 0x20
#define DS2760_ACTIVE_FULL 0x20
#define DS2760_EEPROM_BLOCK1 0x30
+#define DS2760_STATUS_WRITE_REG 0x31
#define DS2760_RATED_CAPACITY 0x32
#define DS2760_CURRENT_OFFSET_BIAS 0x33
#define DS2760_ACTIVE_EMPTY 0x3b
@@ -46,5 +51,7 @@
size_t count);
extern int w1_ds2760_write(struct device *dev, char *buf, int addr,
size_t count);
+extern int w1_ds2760_store_eeprom(struct device *dev, int addr);
+extern int w1_ds2760_recall_eeprom(struct device *dev, int addr);
#endif /* !__w1_ds2760_h__ */
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index b166f28..b1ccc04 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -240,6 +240,32 @@
To compile this driver as a module, choose M here: the
module will be called orion_wdt.
+config COH901327_WATCHDOG
+ bool "ST-Ericsson COH 901 327 watchdog"
+ depends on ARCH_U300
+ default y if MACH_U300
+ help
+ Say Y here to include Watchdog timer support for the
+ watchdog embedded into the ST-Ericsson U300 series platforms.
+ This watchdog is used to reset the system and thus cannot be
+ compiled as a module.
+
+config TWL4030_WATCHDOG
+ tristate "TWL4030 Watchdog"
+ depends on TWL4030_CORE
+ help
+ Support for TI TWL4030 watchdog. Say 'Y' here to enable the
+ watchdog timer support for TWL4030 chips.
+
+config STMP3XXX_WATCHDOG
+ tristate "Freescale STMP3XXX watchdog"
+ depends on ARCH_STMP3XXX
+ help
+ Say Y here if to include support for the watchdog timer
+ for the Sigmatel STMP37XX/378X SoC.
+ To compile this driver as a module, choose M here: the
+ module will be called stmp3xxx_wdt.
+
# AVR32 Architecture
config AT32AP700X_WDT
@@ -703,6 +729,12 @@
# MIPS Architecture
+config BCM47XX_WDT
+ tristate "Broadcom BCM47xx Watchdog Timer"
+ depends on BCM47XX
+ help
+ Hardware driver for the Broadcom BCM47xx Watchog Timer.
+
config RC32434_WDT
tristate "IDT RC32434 SoC Watchdog Timer"
depends on MIKROTIK_RB532
@@ -729,6 +761,15 @@
Hardware driver for the MTX-1 boards. This is a watchdog timer that
will reboot the machine after a 100 seconds timer expired.
+config PNX833X_WDT
+ tristate "PNX833x Hardware Watchdog"
+ depends on SOC_PNX8335
+ help
+ Hardware driver for the PNX833x's watchdog. This is a
+ watchdog timer that will reboot the machine after a programable
+ timer has expired and no process has written to /dev/watchdog during
+ that time.
+
config WDT_RM9K_GPI
tristate "RM9000/GPI hardware watchdog"
depends on CPU_RM9000
@@ -966,24 +1007,16 @@
---help---
If you have a PCI-WDT500/501 watchdog board, say Y here, otherwise N.
- To compile this driver as a module, choose M here: the
- module will be called wdt_pci.
-
-config WDT_501_PCI
- bool "PCI-WDT501 features"
- depends on WDTPCI
- help
- Saying Y here and creating a character special file /dev/temperature
- with major number 10 and minor number 131 ("man mknod") will give
- you a thermometer inside your computer: reading from
- /dev/temperature yields one byte, the temperature in degrees
- Fahrenheit. This works only if you have a PCI-WDT501 watchdog board
- installed.
+ If you have a PCI-WDT501 watchdog board then you can enable the
+ temperature sensor by setting the type parameter to 501.
If you want to enable the Fan Tachometer on the PCI-WDT501, then you
can do this via the tachometer parameter. Only do this if you have a
fan tachometer actually set up.
+ To compile this driver as a module, choose M here: the
+ module will be called wdt_pci.
+
#
# USB-based Watchdog Cards
#
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index c3afa14..3d77429 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -28,6 +28,7 @@
obj-$(CONFIG_AT91RM9200_WATCHDOG) += at91rm9200_wdt.o
obj-$(CONFIG_AT91SAM9X_WATCHDOG) += at91sam9_wdt.o
obj-$(CONFIG_OMAP_WATCHDOG) += omap_wdt.o
+obj-$(CONFIG_TWL4030_WATCHDOG) += twl4030_wdt.o
obj-$(CONFIG_21285_WATCHDOG) += wdt285.o
obj-$(CONFIG_977_WATCHDOG) += wdt977.o
obj-$(CONFIG_IXP2000_WATCHDOG) += ixp2000_wdt.o
@@ -41,6 +42,8 @@
obj-$(CONFIG_IOP_WATCHDOG) += iop_wdt.o
obj-$(CONFIG_DAVINCI_WATCHDOG) += davinci_wdt.o
obj-$(CONFIG_ORION_WATCHDOG) += orion_wdt.o
+obj-$(CONFIG_COH901327_WATCHDOG) += coh901327_wdt.o
+obj-$(CONFIG_STMP3XXX_WATCHDOG) += stmp3xxx_wdt.o
# AVR32 Architecture
obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o
@@ -98,9 +101,11 @@
# M68KNOMMU Architecture
# MIPS Architecture
+obj-$(CONFIG_BCM47XX_WDT) += bcm47xx_wdt.o
obj-$(CONFIG_RC32434_WDT) += rc32434_wdt.o
obj-$(CONFIG_INDYDOG) += indydog.o
obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o
+obj-$(CONFIG_PNX833X_WDT) += pnx833x_wdt.o
obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o
obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
diff --git a/drivers/watchdog/bcm47xx_wdt.c b/drivers/watchdog/bcm47xx_wdt.c
new file mode 100644
index 0000000..5c7011c
--- /dev/null
+++ b/drivers/watchdog/bcm47xx_wdt.c
@@ -0,0 +1,286 @@
+/*
+ * Watchdog driver for Broadcom BCM47XX
+ *
+ * Copyright (C) 2008 Aleksandar Radovanovic <biblbroks@sezampro.rs>
+ * Copyright (C) 2009 Matthieu CASTET <castet.matthieu@free.fr>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/bitops.h>
+#include <linux/errno.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/miscdevice.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/reboot.h>
+#include <linux/types.h>
+#include <linux/uaccess.h>
+#include <linux/watchdog.h>
+#include <linux/timer.h>
+#include <linux/jiffies.h>
+#include <linux/ssb/ssb_embedded.h>
+#include <asm/mach-bcm47xx/bcm47xx.h>
+
+#define DRV_NAME "bcm47xx_wdt"
+
+#define WDT_DEFAULT_TIME 30 /* seconds */
+#define WDT_MAX_TIME 255 /* seconds */
+
+static int wdt_time = WDT_DEFAULT_TIME;
+static int nowayout = WATCHDOG_NOWAYOUT;
+
+module_param(wdt_time, int, 0);
+MODULE_PARM_DESC(wdt_time, "Watchdog time in seconds. (default="
+ __MODULE_STRING(WDT_DEFAULT_TIME) ")");
+
+#ifdef CONFIG_WATCHDOG_NOWAYOUT
+module_param(nowayout, int, 0);
+MODULE_PARM_DESC(nowayout,
+ "Watchdog cannot be stopped once started (default="
+ __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+#endif
+
+static unsigned long bcm47xx_wdt_busy;
+static char expect_release;
+static struct timer_list wdt_timer;
+static atomic_t ticks;
+
+static inline void bcm47xx_wdt_hw_start(void)
+{
+ /* this is 2,5s on 100Mhz clock and 2s on 133 Mhz */
+ ssb_watchdog_timer_set(&ssb_bcm47xx, 0xfffffff);
+}
+
+static inline int bcm47xx_wdt_hw_stop(void)
+{
+ return ssb_watchdog_timer_set(&ssb_bcm47xx, 0);
+}
+
+static void bcm47xx_timer_tick(unsigned long unused)
+{
+ if (!atomic_dec_and_test(&ticks)) {
+ bcm47xx_wdt_hw_start();
+ mod_timer(&wdt_timer, jiffies + HZ);
+ } else {
+ printk(KERN_CRIT DRV_NAME "Watchdog will fire soon!!!\n");
+ }
+}
+
+static inline void bcm47xx_wdt_pet(void)
+{
+ atomic_set(&ticks, wdt_time);
+}
+
+static void bcm47xx_wdt_start(void)
+{
+ bcm47xx_wdt_pet();
+ bcm47xx_timer_tick(0);
+}
+
+static void bcm47xx_wdt_pause(void)
+{
+ del_timer_sync(&wdt_timer);
+ bcm47xx_wdt_hw_stop();
+}
+
+static void bcm47xx_wdt_stop(void)
+{
+ bcm47xx_wdt_pause();
+}
+
+static int bcm47xx_wdt_settimeout(int new_time)
+{
+ if ((new_time <= 0) || (new_time > WDT_MAX_TIME))
+ return -EINVAL;
+
+ wdt_time = new_time;
+ return 0;
+}
+
+static int bcm47xx_wdt_open(struct inode *inode, struct file *file)
+{
+ if (test_and_set_bit(0, &bcm47xx_wdt_busy))
+ return -EBUSY;
+
+ bcm47xx_wdt_start();
+ return nonseekable_open(inode, file);
+}
+
+static int bcm47xx_wdt_release(struct inode *inode, struct file *file)
+{
+ if (expect_release == 42) {
+ bcm47xx_wdt_stop();
+ } else {
+ printk(KERN_CRIT DRV_NAME
+ ": Unexpected close, not stopping watchdog!\n");
+ bcm47xx_wdt_start();
+ }
+
+ clear_bit(0, &bcm47xx_wdt_busy);
+ expect_release = 0;
+ return 0;
+}
+
+static ssize_t bcm47xx_wdt_write(struct file *file, const char __user *data,
+ size_t len, loff_t *ppos)
+{
+ if (len) {
+ if (!nowayout) {
+ size_t i;
+
+ expect_release = 0;
+
+ for (i = 0; i != len; i++) {
+ char c;
+ if (get_user(c, data + i))
+ return -EFAULT;
+ if (c == 'V')
+ expect_release = 42;
+ }
+ }
+ bcm47xx_wdt_pet();
+ }
+ return len;
+}
+
+static struct watchdog_info bcm47xx_wdt_info = {
+ .identity = DRV_NAME,
+ .options = WDIOF_SETTIMEOUT |
+ WDIOF_KEEPALIVEPING |
+ WDIOF_MAGICCLOSE,
+};
+
+static long bcm47xx_wdt_ioctl(struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ void __user *argp = (void __user *)arg;
+ int __user *p = argp;
+ int new_value, retval = -EINVAL;;
+
+ switch (cmd) {
+ case WDIOC_GETSUPPORT:
+ return copy_to_user(argp, &bcm47xx_wdt_info,
+ sizeof(bcm47xx_wdt_info)) ? -EFAULT : 0;
+
+ case WDIOC_GETSTATUS:
+ case WDIOC_GETBOOTSTATUS:
+ return put_user(0, p);
+
+ case WDIOC_SETOPTIONS:
+ if (get_user(new_value, p))
+ return -EFAULT;
+
+ if (new_value & WDIOS_DISABLECARD) {
+ bcm47xx_wdt_stop();
+ retval = 0;
+ }
+
+ if (new_value & WDIOS_ENABLECARD) {
+ bcm47xx_wdt_start();
+ retval = 0;
+ }
+
+ return retval;
+
+ case WDIOC_KEEPALIVE:
+ bcm47xx_wdt_pet();
+ return 0;
+
+ case WDIOC_SETTIMEOUT:
+ if (get_user(new_value, p))
+ return -EFAULT;
+
+ if (bcm47xx_wdt_settimeout(new_value))
+ return -EINVAL;
+
+ bcm47xx_wdt_pet();
+
+ case WDIOC_GETTIMEOUT:
+ return put_user(wdt_time, p);
+
+ default:
+ return -ENOTTY;
+ }
+}
+
+static int bcm47xx_wdt_notify_sys(struct notifier_block *this,
+ unsigned long code, void *unused)
+{
+ if (code == SYS_DOWN || code == SYS_HALT)
+ bcm47xx_wdt_stop();
+ return NOTIFY_DONE;
+}
+
+static const struct file_operations bcm47xx_wdt_fops = {
+ .owner = THIS_MODULE,
+ .llseek = no_llseek,
+ .unlocked_ioctl = bcm47xx_wdt_ioctl,
+ .open = bcm47xx_wdt_open,
+ .release = bcm47xx_wdt_release,
+ .write = bcm47xx_wdt_write,
+};
+
+static struct miscdevice bcm47xx_wdt_miscdev = {
+ .minor = WATCHDOG_MINOR,
+ .name = "watchdog",
+ .fops = &bcm47xx_wdt_fops,
+};
+
+static struct notifier_block bcm47xx_wdt_notifier = {
+ .notifier_call = bcm47xx_wdt_notify_sys,
+};
+
+static int __init bcm47xx_wdt_init(void)
+{
+ int ret;
+
+ if (bcm47xx_wdt_hw_stop() < 0)
+ return -ENODEV;
+
+ setup_timer(&wdt_timer, bcm47xx_timer_tick, 0L);
+
+ if (bcm47xx_wdt_settimeout(wdt_time)) {
+ bcm47xx_wdt_settimeout(WDT_DEFAULT_TIME);
+ printk(KERN_INFO DRV_NAME ": "
+ "wdt_time value must be 0 < wdt_time < %d, using %d\n",
+ (WDT_MAX_TIME + 1), wdt_time);
+ }
+
+ ret = register_reboot_notifier(&bcm47xx_wdt_notifier);
+ if (ret)
+ return ret;
+
+ ret = misc_register(&bcm47xx_wdt_miscdev);
+ if (ret) {
+ unregister_reboot_notifier(&bcm47xx_wdt_notifier);
+ return ret;
+ }
+
+ printk(KERN_INFO "BCM47xx Watchdog Timer enabled (%d seconds%s)\n",
+ wdt_time, nowayout ? ", nowayout" : "");
+ return 0;
+}
+
+static void __exit bcm47xx_wdt_exit(void)
+{
+ if (!nowayout)
+ bcm47xx_wdt_stop();
+
+ misc_deregister(&bcm47xx_wdt_miscdev);
+
+ unregister_reboot_notifier(&bcm47xx_wdt_notifier);
+}
+
+module_init(bcm47xx_wdt_init);
+module_exit(bcm47xx_wdt_exit);
+
+MODULE_AUTHOR("Aleksandar Radovanovic");
+MODULE_DESCRIPTION("Watchdog driver for Broadcom BCM47xx");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
diff --git a/drivers/watchdog/coh901327_wdt.c b/drivers/watchdog/coh901327_wdt.c
new file mode 100644
index 0000000..fecb307
--- /dev/null
+++ b/drivers/watchdog/coh901327_wdt.c
@@ -0,0 +1,537 @@
+/*
+ * coh901327_wdt.c
+ *
+ * Copyright (C) 2008-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Watchdog driver for the ST-Ericsson AB COH 901 327 IP core
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/fs.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/interrupt.h>
+#include <linux/pm.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/bitops.h>
+#include <linux/uaccess.h>
+#include <linux/clk.h>
+
+#define DRV_NAME "WDOG COH 901 327"
+
+/*
+ * COH 901 327 register definitions
+ */
+
+/* WDOG_FEED Register 32bit (-/W) */
+#define U300_WDOG_FR 0x00
+#define U300_WDOG_FR_FEED_RESTART_TIMER 0xFEEDU
+/* WDOG_TIMEOUT Register 32bit (R/W) */
+#define U300_WDOG_TR 0x04
+#define U300_WDOG_TR_TIMEOUT_MASK 0x7FFFU
+/* WDOG_DISABLE1 Register 32bit (-/W) */
+#define U300_WDOG_D1R 0x08
+#define U300_WDOG_D1R_DISABLE1_DISABLE_TIMER 0x2BADU
+/* WDOG_DISABLE2 Register 32bit (R/W) */
+#define U300_WDOG_D2R 0x0C
+#define U300_WDOG_D2R_DISABLE2_DISABLE_TIMER 0xCAFEU
+#define U300_WDOG_D2R_DISABLE_STATUS_DISABLED 0xDABEU
+#define U300_WDOG_D2R_DISABLE_STATUS_ENABLED 0x0000U
+/* WDOG_STATUS Register 32bit (R/W) */
+#define U300_WDOG_SR 0x10
+#define U300_WDOG_SR_STATUS_TIMED_OUT 0xCFE8U
+#define U300_WDOG_SR_STATUS_NORMAL 0x0000U
+#define U300_WDOG_SR_RESET_STATUS_RESET 0xE8B4U
+/* WDOG_COUNT Register 32bit (R/-) */
+#define U300_WDOG_CR 0x14
+#define U300_WDOG_CR_VALID_IND 0x8000U
+#define U300_WDOG_CR_VALID_STABLE 0x0000U
+#define U300_WDOG_CR_COUNT_VALUE_MASK 0x7FFFU
+/* WDOG_JTAGOVR Register 32bit (R/W) */
+#define U300_WDOG_JOR 0x18
+#define U300_WDOG_JOR_JTAG_MODE_IND 0x0002U
+#define U300_WDOG_JOR_JTAG_WATCHDOG_ENABLE 0x0001U
+/* WDOG_RESTART Register 32bit (-/W) */
+#define U300_WDOG_RR 0x1C
+#define U300_WDOG_RR_RESTART_VALUE_RESUME 0xACEDU
+/* WDOG_IRQ_EVENT Register 32bit (R/W) */
+#define U300_WDOG_IER 0x20
+#define U300_WDOG_IER_WILL_BARK_IRQ_EVENT_IND 0x0001U
+#define U300_WDOG_IER_WILL_BARK_IRQ_ACK_ENABLE 0x0001U
+/* WDOG_IRQ_MASK Register 32bit (R/W) */
+#define U300_WDOG_IMR 0x24
+#define U300_WDOG_IMR_WILL_BARK_IRQ_ENABLE 0x0001U
+/* WDOG_IRQ_FORCE Register 32bit (R/W) */
+#define U300_WDOG_IFR 0x28
+#define U300_WDOG_IFR_WILL_BARK_IRQ_FORCE_ENABLE 0x0001U
+
+/* Default timeout in seconds = 1 minute */
+static int margin = 60;
+static resource_size_t phybase;
+static resource_size_t physize;
+static int irq;
+static void __iomem *virtbase;
+static unsigned long coh901327_users;
+static unsigned long boot_status;
+static u16 wdogenablestore;
+static u16 irqmaskstore;
+static struct device *parent;
+
+/*
+ * The watchdog block is of course always clocked, the
+ * clk_enable()/clk_disable() calls are mainly for performing reference
+ * counting higher up in the clock hierarchy.
+ */
+static struct clk *clk;
+
+/*
+ * Enabling and disabling functions.
+ */
+static void coh901327_enable(u16 timeout)
+{
+ u16 val;
+
+ clk_enable(clk);
+ /* Restart timer if it is disabled */
+ val = readw(virtbase + U300_WDOG_D2R);
+ if (val == U300_WDOG_D2R_DISABLE_STATUS_DISABLED)
+ writew(U300_WDOG_RR_RESTART_VALUE_RESUME,
+ virtbase + U300_WDOG_RR);
+ /* Acknowledge any pending interrupt so it doesn't just fire off */
+ writew(U300_WDOG_IER_WILL_BARK_IRQ_ACK_ENABLE,
+ virtbase + U300_WDOG_IER);
+ /* Enable the watchdog interrupt */
+ writew(U300_WDOG_IMR_WILL_BARK_IRQ_ENABLE, virtbase + U300_WDOG_IMR);
+ /* Activate the watchdog timer */
+ writew(timeout, virtbase + U300_WDOG_TR);
+ /* Start the watchdog timer */
+ writew(U300_WDOG_FR_FEED_RESTART_TIMER, virtbase + U300_WDOG_FR);
+ /*
+ * Extra read so that this change propagate in the watchdog.
+ */
+ (void) readw(virtbase + U300_WDOG_CR);
+ val = readw(virtbase + U300_WDOG_D2R);
+ clk_disable(clk);
+ if (val != U300_WDOG_D2R_DISABLE_STATUS_ENABLED)
+ dev_err(parent,
+ "%s(): watchdog not enabled! D2R value %04x\n",
+ __func__, val);
+}
+
+static void coh901327_disable(void)
+{
+ u16 val;
+
+ clk_enable(clk);
+ /* Disable the watchdog interrupt if it is active */
+ writew(0x0000U, virtbase + U300_WDOG_IMR);
+ /* If the watchdog is currently enabled, attempt to disable it */
+ val = readw(virtbase + U300_WDOG_D2R);
+ if (val != U300_WDOG_D2R_DISABLE_STATUS_DISABLED) {
+ writew(U300_WDOG_D1R_DISABLE1_DISABLE_TIMER,
+ virtbase + U300_WDOG_D1R);
+ writew(U300_WDOG_D2R_DISABLE2_DISABLE_TIMER,
+ virtbase + U300_WDOG_D2R);
+ /* Write this twice (else problems occur) */
+ writew(U300_WDOG_D2R_DISABLE2_DISABLE_TIMER,
+ virtbase + U300_WDOG_D2R);
+ }
+ val = readw(virtbase + U300_WDOG_D2R);
+ clk_disable(clk);
+ if (val != U300_WDOG_D2R_DISABLE_STATUS_DISABLED)
+ dev_err(parent,
+ "%s(): watchdog not disabled! D2R value %04x\n",
+ __func__, val);
+}
+
+static void coh901327_start(void)
+{
+ coh901327_enable(margin * 100);
+}
+
+static void coh901327_keepalive(void)
+{
+ clk_enable(clk);
+ /* Feed the watchdog */
+ writew(U300_WDOG_FR_FEED_RESTART_TIMER,
+ virtbase + U300_WDOG_FR);
+ clk_disable(clk);
+}
+
+static int coh901327_settimeout(int time)
+{
+ /*
+ * Max margin is 327 since the 10ms
+ * timeout register is max
+ * 0x7FFF = 327670ms ~= 327s.
+ */
+ if (time <= 0 || time > 327)
+ return -EINVAL;
+
+ margin = time;
+ clk_enable(clk);
+ /* Set new timeout value */
+ writew(margin * 100, virtbase + U300_WDOG_TR);
+ /* Feed the dog */
+ writew(U300_WDOG_FR_FEED_RESTART_TIMER,
+ virtbase + U300_WDOG_FR);
+ clk_disable(clk);
+ return 0;
+}
+
+/*
+ * This interrupt occurs 10 ms before the watchdog WILL bark.
+ */
+static irqreturn_t coh901327_interrupt(int irq, void *data)
+{
+ u16 val;
+
+ /*
+ * Ack IRQ? If this occurs we're FUBAR anyway, so
+ * just acknowledge, disable the interrupt and await the imminent end.
+ * If you at some point need a host of callbacks to be called
+ * when the system is about to watchdog-reset, add them here!
+ *
+ * NOTE: on future versions of this IP-block, it will be possible
+ * to prevent a watchdog reset by feeding the watchdog at this
+ * point.
+ */
+ clk_enable(clk);
+ val = readw(virtbase + U300_WDOG_IER);
+ if (val == U300_WDOG_IER_WILL_BARK_IRQ_EVENT_IND)
+ writew(U300_WDOG_IER_WILL_BARK_IRQ_ACK_ENABLE,
+ virtbase + U300_WDOG_IER);
+ writew(0x0000U, virtbase + U300_WDOG_IMR);
+ clk_disable(clk);
+ dev_crit(parent, "watchdog is barking!\n");
+ return IRQ_HANDLED;
+}
+
+/*
+ * Allow only one user (daemon) to open the watchdog
+ */
+static int coh901327_open(struct inode *inode, struct file *file)
+{
+ if (test_and_set_bit(1, &coh901327_users))
+ return -EBUSY;
+ coh901327_start();
+ return nonseekable_open(inode, file);
+}
+
+static int coh901327_release(struct inode *inode, struct file *file)
+{
+ clear_bit(1, &coh901327_users);
+ coh901327_disable();
+ return 0;
+}
+
+static ssize_t coh901327_write(struct file *file, const char __user *data,
+ size_t len, loff_t *ppos)
+{
+ if (len)
+ coh901327_keepalive();
+ return len;
+}
+
+static long coh901327_ioctl(struct file *file, unsigned int cmd,
+ unsigned long arg)
+{
+ int ret = -ENOTTY;
+ u16 val;
+ int time;
+ int new_options;
+ union {
+ struct watchdog_info __user *ident;
+ int __user *i;
+ } uarg;
+ static struct watchdog_info ident = {
+ .options = WDIOF_CARDRESET |
+ WDIOF_SETTIMEOUT |
+ WDIOF_KEEPALIVEPING,
+ .identity = "COH 901 327 Watchdog",
+ .firmware_version = 1,
+ };
+ uarg.i = (int __user *)arg;
+
+ switch (cmd) {
+ case WDIOC_GETSUPPORT:
+ ret = copy_to_user(uarg.ident, &ident,
+ sizeof(ident)) ? -EFAULT : 0;
+ break;
+
+ case WDIOC_GETSTATUS:
+ ret = put_user(0, uarg.i);
+ break;
+
+ case WDIOC_GETBOOTSTATUS:
+ ret = put_user(boot_status, uarg.i);
+ break;
+
+ case WDIOC_SETOPTIONS:
+ ret = get_user(new_options, uarg.i);
+ if (ret)
+ break;
+ if (new_options & WDIOS_DISABLECARD)
+ coh901327_disable();
+ if (new_options & WDIOS_ENABLECARD)
+ coh901327_start();
+ ret = 0;
+ break;
+
+ case WDIOC_KEEPALIVE:
+ coh901327_keepalive();
+ ret = 0;
+ break;
+
+ case WDIOC_SETTIMEOUT:
+ ret = get_user(time, uarg.i);
+ if (ret)
+ break;
+
+ ret = coh901327_settimeout(time);
+ if (ret)
+ break;
+ /* Then fall through to return set value */
+
+ case WDIOC_GETTIMEOUT:
+ ret = put_user(margin, uarg.i);
+ break;
+
+ case WDIOC_GETTIMELEFT:
+ clk_enable(clk);
+ /* Read repeatedly until the value is stable! */
+ val = readw(virtbase + U300_WDOG_CR);
+ while (val & U300_WDOG_CR_VALID_IND)
+ val = readw(virtbase + U300_WDOG_CR);
+ val &= U300_WDOG_CR_COUNT_VALUE_MASK;
+ clk_disable(clk);
+ if (val != 0)
+ val /= 100;
+ ret = put_user(val, uarg.i);
+ break;
+ }
+ return ret;
+}
+
+static const struct file_operations coh901327_fops = {
+ .owner = THIS_MODULE,
+ .llseek = no_llseek,
+ .write = coh901327_write,
+ .unlocked_ioctl = coh901327_ioctl,
+ .open = coh901327_open,
+ .release = coh901327_release,
+};
+
+static struct miscdevice coh901327_miscdev = {
+ .minor = WATCHDOG_MINOR,
+ .name = "watchdog",
+ .fops = &coh901327_fops,
+};
+
+static int __exit coh901327_remove(struct platform_device *pdev)
+{
+ misc_deregister(&coh901327_miscdev);
+ coh901327_disable();
+ free_irq(irq, pdev);
+ clk_put(clk);
+ iounmap(virtbase);
+ release_mem_region(phybase, physize);
+ return 0;
+}
+
+
+static int __init coh901327_probe(struct platform_device *pdev)
+{
+ int ret;
+ u16 val;
+ struct resource *res;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -ENOENT;
+
+ parent = &pdev->dev;
+ physize = resource_size(res);
+ phybase = res->start;
+
+ if (request_mem_region(phybase, physize, DRV_NAME) == NULL) {
+ ret = -EBUSY;
+ goto out;
+ }
+
+ virtbase = ioremap(phybase, physize);
+ if (!virtbase) {
+ ret = -ENOMEM;
+ goto out_no_remap;
+ }
+
+ clk = clk_get(&pdev->dev, NULL);
+ if (IS_ERR(clk)) {
+ ret = PTR_ERR(clk);
+ dev_err(&pdev->dev, "could not get clock\n");
+ goto out_no_clk;
+ }
+ ret = clk_enable(clk);
+ if (ret) {
+ dev_err(&pdev->dev, "could not enable clock\n");
+ goto out_no_clk_enable;
+ }
+
+ val = readw(virtbase + U300_WDOG_SR);
+ switch (val) {
+ case U300_WDOG_SR_STATUS_TIMED_OUT:
+ dev_info(&pdev->dev,
+ "watchdog timed out since last chip reset!\n");
+ boot_status = WDIOF_CARDRESET;
+ /* Status will be cleared below */
+ break;
+ case U300_WDOG_SR_STATUS_NORMAL:
+ dev_info(&pdev->dev,
+ "in normal status, no timeouts have occurred.\n");
+ break;
+ default:
+ dev_info(&pdev->dev,
+ "contains an illegal status code (%08x)\n", val);
+ break;
+ }
+
+ val = readw(virtbase + U300_WDOG_D2R);
+ switch (val) {
+ case U300_WDOG_D2R_DISABLE_STATUS_DISABLED:
+ dev_info(&pdev->dev, "currently disabled.\n");
+ break;
+ case U300_WDOG_D2R_DISABLE_STATUS_ENABLED:
+ dev_info(&pdev->dev,
+ "currently enabled! (disabling it now)\n");
+ coh901327_disable();
+ break;
+ default:
+ dev_err(&pdev->dev,
+ "contains an illegal enable/disable code (%08x)\n",
+ val);
+ break;
+ }
+
+ /* Reset the watchdog */
+ writew(U300_WDOG_SR_RESET_STATUS_RESET, virtbase + U300_WDOG_SR);
+
+ irq = platform_get_irq(pdev, 0);
+ if (request_irq(irq, coh901327_interrupt, IRQF_DISABLED,
+ DRV_NAME " Bark", pdev)) {
+ ret = -EIO;
+ goto out_no_irq;
+ }
+
+ clk_disable(clk);
+
+ ret = misc_register(&coh901327_miscdev);
+ if (ret == 0)
+ dev_info(&pdev->dev,
+ "initialized. timer margin=%d sec\n", margin);
+ else
+ goto out_no_wdog;
+
+ return 0;
+
+out_no_wdog:
+ free_irq(irq, pdev);
+out_no_irq:
+ clk_disable(clk);
+out_no_clk_enable:
+ clk_put(clk);
+out_no_clk:
+ iounmap(virtbase);
+out_no_remap:
+ release_mem_region(phybase, SZ_4K);
+out:
+ return ret;
+}
+
+#ifdef CONFIG_PM
+static int coh901327_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ irqmaskstore = readw(virtbase + U300_WDOG_IMR) & 0x0001U;
+ wdogenablestore = readw(virtbase + U300_WDOG_D2R);
+ /* If watchdog is on, disable it here and now */
+ if (wdogenablestore == U300_WDOG_D2R_DISABLE_STATUS_ENABLED)
+ coh901327_disable();
+ return 0;
+}
+
+static int coh901327_resume(struct platform_device *pdev)
+{
+ /* Restore the watchdog interrupt */
+ writew(irqmaskstore, virtbase + U300_WDOG_IMR);
+ if (wdogenablestore == U300_WDOG_D2R_DISABLE_STATUS_ENABLED) {
+ /* Restart the watchdog timer */
+ writew(U300_WDOG_RR_RESTART_VALUE_RESUME,
+ virtbase + U300_WDOG_RR);
+ writew(U300_WDOG_FR_FEED_RESTART_TIMER,
+ virtbase + U300_WDOG_FR);
+ }
+ return 0;
+}
+#else
+#define coh901327_suspend NULL
+#define coh901327_resume NULL
+#endif
+
+/*
+ * Mistreating the watchdog is the only way to perform a software reset of the
+ * system on EMP platforms. So we implement this and export a symbol for it.
+ */
+void coh901327_watchdog_reset(void)
+{
+ /* Enable even if on JTAG too */
+ writew(U300_WDOG_JOR_JTAG_WATCHDOG_ENABLE,
+ virtbase + U300_WDOG_JOR);
+ /*
+ * Timeout = 5s, we have to wait for the watchdog reset to
+ * actually take place: the watchdog will be reloaded with the
+ * default value immediately, so we HAVE to reboot and get back
+ * into the kernel in 30s, or the device will reboot again!
+ * The boot loader will typically deactivate the watchdog, so we
+ * need time enough for the boot loader to get to the point of
+ * deactivating the watchdog before it is shut down by it.
+ *
+ * NOTE: on future versions of the watchdog, this restriction is
+ * gone: the watchdog will be reloaded with a defaul value (1 min)
+ * instead of last value, and you can conveniently set the watchdog
+ * timeout to 10ms (value = 1) without any problems.
+ */
+ coh901327_enable(500);
+ /* Return and await doom */
+}
+
+static struct platform_driver coh901327_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "coh901327_wdog",
+ },
+ .remove = __exit_p(coh901327_remove),
+ .suspend = coh901327_suspend,
+ .resume = coh901327_resume,
+};
+
+static int __init coh901327_init(void)
+{
+ return platform_driver_probe(&coh901327_driver, coh901327_probe);
+}
+module_init(coh901327_init);
+
+static void __exit coh901327_exit(void)
+{
+ platform_driver_unregister(&coh901327_driver);
+}
+module_exit(coh901327_exit);
+
+MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>");
+MODULE_DESCRIPTION("COH 901 327 Watchdog");
+
+module_param(margin, int, 0);
+MODULE_PARM_DESC(margin, "Watchdog margin in seconds (default 60s)");
+
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c
index c0b9169..a6c5674 100644
--- a/drivers/watchdog/hpwdt.c
+++ b/drivers/watchdog/hpwdt.c
@@ -120,7 +120,8 @@
static char expect_release;
static unsigned long hpwdt_is_open;
static unsigned int allow_kdump;
-static int hpwdt_nmi_sourcing;
+static unsigned int hpwdt_nmi_sourcing;
+static unsigned int priority; /* hpwdt at end of die_notify list */
static void __iomem *pci_mem_addr; /* the PCI-memory address */
static unsigned long __iomem *hpwdt_timer_reg;
@@ -623,7 +624,7 @@
static struct notifier_block die_notifier = {
.notifier_call = hpwdt_pretimeout,
- .priority = 0x7FFFFFFF,
+ .priority = 0,
};
/*
@@ -641,7 +642,8 @@
hpwdt_nmi_sourcing = 1;
else
dev_warn(&dev->dev, "NMI sourcing is disabled. To enable this "
- "functionality you must reboot with nmi_watchdog=0.\n");
+ "functionality you must reboot with nmi_watchdog=0 "
+ "and load the hpwdt driver with priority=1.\n");
}
#else
static void __devinit hpwdt_check_nmi_sourcing(struct pci_dev *dev)
@@ -714,6 +716,14 @@
cmn_regs.u1.rah = 0x0D;
cmn_regs.u1.ral = 0x02;
+ /*
+ * If the priority is set to 1, then we will be put first on the
+ * die notify list to handle a critical NMI. The default is to
+ * be last so other users of the NMI signal can function.
+ */
+ if (priority)
+ die_notifier.priority = 0x7FFFFFFF;
+
retval = register_die_notifier(&die_notifier);
if (retval != 0) {
dev_warn(&dev->dev,
@@ -733,9 +743,11 @@
printk(KERN_INFO
"hp Watchdog Timer Driver: %s"
", timer margin: %d seconds (nowayout=%d)"
- ", allow kernel dump: %s (default = 0/OFF).\n",
+ ", allow kernel dump: %s (default = 0/OFF)"
+ ", priority: %s (default = 0/LAST).\n",
HPWDT_VERSION, soft_margin, nowayout,
- (allow_kdump == 0) ? "OFF" : "ON");
+ (allow_kdump == 0) ? "OFF" : "ON",
+ (priority == 0) ? "LAST" : "FIRST");
return 0;
@@ -798,5 +810,9 @@
MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+module_param(priority, int, 0);
+MODULE_PARM_DESC(priority, "The hpwdt driver handles NMIs first or last"
+ " (default = 0/Last)\n");
+
module_init(hpwdt_init);
module_exit(hpwdt_cleanup);
diff --git a/drivers/watchdog/omap_wdt.c b/drivers/watchdog/omap_wdt.c
index f271385..3ed571a 100644
--- a/drivers/watchdog/omap_wdt.c
+++ b/drivers/watchdog/omap_wdt.c
@@ -159,6 +159,7 @@
file->private_data = (void *) wdev;
omap_wdt_set_timeout(wdev);
+ omap_wdt_ping(wdev); /* trigger loading of new timeout value */
omap_wdt_enable(wdev);
return nonseekable_open(inode, file);
@@ -313,6 +314,9 @@
platform_set_drvdata(pdev, wdev);
+ clk_enable(wdev->ick);
+ clk_enable(wdev->fck);
+
omap_wdt_disable(wdev);
omap_wdt_adjust_timeout(timer_margin);
@@ -332,6 +336,9 @@
/* autogate OCP interface clock */
__raw_writel(0x01, wdev->base + OMAP_WATCHDOG_SYS_CONFIG);
+ clk_disable(wdev->ick);
+ clk_disable(wdev->fck);
+
omap_wdt_dev = pdev;
return 0;
diff --git a/drivers/watchdog/pnx833x_wdt.c b/drivers/watchdog/pnx833x_wdt.c
new file mode 100644
index 0000000..538ec2c
--- /dev/null
+++ b/drivers/watchdog/pnx833x_wdt.c
@@ -0,0 +1,282 @@
+/*
+ * PNX833x Hardware Watchdog Driver
+ * Copyright 2008 NXP Semiconductors
+ * Daniel Laird <daniel.j.laird@nxp.com>
+ * Andre McCurdy <andre.mccurdy@nxp.com>
+ *
+ * Heavily based upon - IndyDog 0.3
+ * A Hardware Watchdog Device for SGI IP22
+ *
+ * (c) Copyright 2002 Guido Guenther <agx@sigxcpu.org>, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * based on softdog.c by Alan Cox <alan@redhat.com>
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/mm.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/notifier.h>
+#include <linux/reboot.h>
+#include <linux/init.h>
+#include <asm/mach-pnx833x/pnx833x.h>
+
+#define PFX "pnx833x: "
+#define WATCHDOG_TIMEOUT 30 /* 30 sec Maximum timeout */
+#define WATCHDOG_COUNT_FREQUENCY 68000000U /* Watchdog counts at 68MHZ. */
+
+/** CONFIG block */
+#define PNX833X_CONFIG (0x07000U)
+#define PNX833X_CONFIG_CPU_WATCHDOG (0x54)
+#define PNX833X_CONFIG_CPU_WATCHDOG_COMPARE (0x58)
+#define PNX833X_CONFIG_CPU_COUNTERS_CONTROL (0x1c)
+
+/** RESET block */
+#define PNX833X_RESET (0x08000U)
+#define PNX833X_RESET_CONFIG (0x08)
+
+static int pnx833x_wdt_alive;
+
+/* Set default timeout in MHZ.*/
+static int pnx833x_wdt_timeout = (WATCHDOG_TIMEOUT * WATCHDOG_COUNT_FREQUENCY);
+module_param(pnx833x_wdt_timeout, int, 0);
+MODULE_PARM_DESC(timeout, "Watchdog timeout in Mhz. (68Mhz clock), default="
+ __MODULE_STRING(pnx833x_wdt_timeout) "(30 seconds).");
+
+static int nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, int, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+ __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+static int start_enabled = 1;
+module_param(start_enabled, int, 0);
+MODULE_PARM_DESC(start_enabled, "Watchdog is started on module insertion "
+ "(default=" __MODULE_STRING(start_enabled) ")");
+
+static void pnx833x_wdt_start(void)
+{
+ /* Enable watchdog causing reset. */
+ PNX833X_REG(PNX833X_RESET + PNX833X_RESET_CONFIG) |= 0x1;
+ /* Set timeout.*/
+ PNX833X_REG(PNX833X_CONFIG +
+ PNX833X_CONFIG_CPU_WATCHDOG_COMPARE) = pnx833x_wdt_timeout;
+ /* Enable watchdog. */
+ PNX833X_REG(PNX833X_CONFIG +
+ PNX833X_CONFIG_CPU_COUNTERS_CONTROL) |= 0x1;
+
+ printk(KERN_INFO PFX "Started watchdog timer.\n");
+}
+
+static void pnx833x_wdt_stop(void)
+{
+ /* Disable watchdog causing reset. */
+ PNX833X_REG(PNX833X_RESET + PNX833X_CONFIG) &= 0xFFFFFFFE;
+ /* Disable watchdog.*/
+ PNX833X_REG(PNX833X_CONFIG +
+ PNX833X_CONFIG_CPU_COUNTERS_CONTROL) &= 0xFFFFFFFE;
+
+ printk(KERN_INFO PFX "Stopped watchdog timer.\n");
+}
+
+static void pnx833x_wdt_ping(void)
+{
+ PNX833X_REG(PNX833X_CONFIG +
+ PNX833X_CONFIG_CPU_WATCHDOG_COMPARE) = pnx833x_wdt_timeout;
+}
+
+/*
+ * Allow only one person to hold it open
+ */
+static int pnx833x_wdt_open(struct inode *inode, struct file *file)
+{
+ if (test_and_set_bit(0, &pnx833x_wdt_alive))
+ return -EBUSY;
+
+ if (nowayout)
+ __module_get(THIS_MODULE);
+
+ /* Activate timer */
+ if (!start_enabled)
+ pnx833x_wdt_start();
+
+ pnx833x_wdt_ping();
+
+ printk(KERN_INFO "Started watchdog timer.\n");
+
+ return nonseekable_open(inode, file);
+}
+
+static int pnx833x_wdt_release(struct inode *inode, struct file *file)
+{
+ /* Shut off the timer.
+ * Lock it in if it's a module and we defined ...NOWAYOUT */
+ if (!nowayout)
+ pnx833x_wdt_stop(); /* Turn the WDT off */
+
+ clear_bit(0, &pnx833x_wdt_alive);
+ return 0;
+}
+
+static ssize_t pnx833x_wdt_write(struct file *file, const char *data, size_t len, loff_t *ppos)
+{
+ /* Refresh the timer. */
+ if (len)
+ pnx833x_wdt_ping();
+
+ return len;
+}
+
+static long pnx833x_wdt_ioctl(struct file *file, unsigned int cmd,
+ unsigned long arg)
+{
+ int options, new_timeout = 0;
+ uint32_t timeout, timeout_left = 0;
+
+ static struct watchdog_info ident = {
+ .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT,
+ .firmware_version = 0,
+ .identity = "Hardware Watchdog for PNX833x",
+ };
+
+ switch (cmd) {
+ default:
+ return -ENOTTY;
+
+ case WDIOC_GETSUPPORT:
+ if (copy_to_user((struct watchdog_info *)arg,
+ &ident, sizeof(ident)))
+ return -EFAULT;
+ return 0;
+
+ case WDIOC_GETSTATUS:
+ case WDIOC_GETBOOTSTATUS:
+ return put_user(0, (int *)arg);
+
+ case WDIOC_SETOPTIONS:
+ if (get_user(options, (int *)arg))
+ return -EFAULT;
+
+ if (options & WDIOS_DISABLECARD)
+ pnx833x_wdt_stop();
+
+ if (options & WDIOS_ENABLECARD)
+ pnx833x_wdt_start();
+
+ return 0;
+
+ case WDIOC_KEEPALIVE:
+ pnx833x_wdt_ping();
+ return 0;
+
+ case WDIOC_SETTIMEOUT:
+ {
+ if (get_user(new_timeout, (int *)arg))
+ return -EFAULT;
+
+ pnx833x_wdt_timeout = new_timeout;
+ PNX833X_REG(PNX833X_CONFIG +
+ PNX833X_CONFIG_CPU_WATCHDOG_COMPARE) = new_timeout;
+ return put_user(new_timeout, (int *)arg);
+ }
+
+ case WDIOC_GETTIMEOUT:
+ timeout = PNX833X_REG(PNX833X_CONFIG +
+ PNX833X_CONFIG_CPU_WATCHDOG_COMPARE);
+ return put_user(timeout, (int *)arg);
+
+ case WDIOC_GETTIMELEFT:
+ timeout_left = PNX833X_REG(PNX833X_CONFIG +
+ PNX833X_CONFIG_CPU_WATCHDOG);
+ return put_user(timeout_left, (int *)arg);
+
+ }
+}
+
+static int pnx833x_wdt_notify_sys(struct notifier_block *this,
+ unsigned long code, void *unused)
+{
+ if (code == SYS_DOWN || code == SYS_HALT)
+ pnx833x_wdt_stop(); /* Turn the WDT off */
+
+ return NOTIFY_DONE;
+}
+
+static const struct file_operations pnx833x_wdt_fops = {
+ .owner = THIS_MODULE,
+ .llseek = no_llseek,
+ .write = pnx833x_wdt_write,
+ .unlocked_ioctl = pnx833x_wdt_ioctl,
+ .open = pnx833x_wdt_open,
+ .release = pnx833x_wdt_release,
+};
+
+static struct miscdevice pnx833x_wdt_miscdev = {
+ .minor = WATCHDOG_MINOR,
+ .name = "watchdog",
+ .fops = &pnx833x_wdt_fops,
+};
+
+static struct notifier_block pnx833x_wdt_notifier = {
+ .notifier_call = pnx833x_wdt_notify_sys,
+};
+
+static char banner[] __initdata =
+ KERN_INFO PFX "Hardware Watchdog Timer for PNX833x: Version 0.1\n";
+
+static int __init watchdog_init(void)
+{
+ int ret, cause;
+
+ /* Lets check the reason for the reset.*/
+ cause = PNX833X_REG(PNX833X_RESET);
+ /*If bit 31 is set then watchdog was cause of reset.*/
+ if (cause & 0x80000000) {
+ printk(KERN_INFO PFX "The system was previously reset due to "
+ "the watchdog firing - please investigate...\n");
+ }
+
+ ret = register_reboot_notifier(&pnx833x_wdt_notifier);
+ if (ret) {
+ printk(KERN_ERR PFX
+ "cannot register reboot notifier (err=%d)\n", ret);
+ return ret;
+ }
+
+ ret = misc_register(&pnx833x_wdt_miscdev);
+ if (ret) {
+ printk(KERN_ERR PFX
+ "cannot register miscdev on minor=%d (err=%d)\n",
+ WATCHDOG_MINOR, ret);
+ unregister_reboot_notifier(&pnx833x_wdt_notifier);
+ return ret;
+ }
+
+ printk(banner);
+ if (start_enabled)
+ pnx833x_wdt_start();
+
+ return 0;
+}
+
+static void __exit watchdog_exit(void)
+{
+ misc_deregister(&pnx833x_wdt_miscdev);
+ unregister_reboot_notifier(&pnx833x_wdt_notifier);
+}
+
+module_init(watchdog_init);
+module_exit(watchdog_exit);
+
+MODULE_AUTHOR("Daniel Laird/Andre McCurdy");
+MODULE_DESCRIPTION("Hardware Watchdog Device for PNX833x");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
diff --git a/drivers/watchdog/stmp3xxx_wdt.c b/drivers/watchdog/stmp3xxx_wdt.c
new file mode 100644
index 0000000..5dd9526
--- /dev/null
+++ b/drivers/watchdog/stmp3xxx_wdt.c
@@ -0,0 +1,296 @@
+/*
+ * Watchdog driver for Freescale STMP37XX/STMP378X
+ *
+ * Author: Vitaly Wool <vital@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/uaccess.h>
+
+#include <mach/platform.h>
+#include <mach/regs-rtc.h>
+
+#define DEFAULT_HEARTBEAT 19
+#define MAX_HEARTBEAT (0x10000000 >> 6)
+
+/* missing bitmask in headers */
+#define BV_RTC_PERSISTENT1_GENERAL__RTC_FORCE_UPDATER 0x80000000
+
+#define WDT_IN_USE 0
+#define WDT_OK_TO_CLOSE 1
+
+#define WDOG_COUNTER_RATE 1000 /* 1 kHz clock */
+
+static DEFINE_SPINLOCK(stmp3xxx_wdt_io_lock);
+static unsigned long wdt_status;
+static const int nowayout = WATCHDOG_NOWAYOUT;
+static int heartbeat = DEFAULT_HEARTBEAT;
+static unsigned long boot_status;
+
+static void wdt_enable(u32 value)
+{
+ spin_lock(&stmp3xxx_wdt_io_lock);
+ __raw_writel(value, REGS_RTC_BASE + HW_RTC_WATCHDOG);
+ stmp3xxx_setl(BM_RTC_CTRL_WATCHDOGEN, REGS_RTC_BASE + HW_RTC_CTRL);
+ stmp3xxx_setl(BV_RTC_PERSISTENT1_GENERAL__RTC_FORCE_UPDATER,
+ REGS_RTC_BASE + HW_RTC_PERSISTENT1);
+ spin_unlock(&stmp3xxx_wdt_io_lock);
+}
+
+static void wdt_disable(void)
+{
+ spin_lock(&stmp3xxx_wdt_io_lock);
+ stmp3xxx_clearl(BV_RTC_PERSISTENT1_GENERAL__RTC_FORCE_UPDATER,
+ REGS_RTC_BASE + HW_RTC_PERSISTENT1);
+ stmp3xxx_clearl(BM_RTC_CTRL_WATCHDOGEN, REGS_RTC_BASE + HW_RTC_CTRL);
+ spin_unlock(&stmp3xxx_wdt_io_lock);
+}
+
+static void wdt_ping(void)
+{
+ wdt_enable(heartbeat * WDOG_COUNTER_RATE);
+}
+
+static int stmp3xxx_wdt_open(struct inode *inode, struct file *file)
+{
+ if (test_and_set_bit(WDT_IN_USE, &wdt_status))
+ return -EBUSY;
+
+ clear_bit(WDT_OK_TO_CLOSE, &wdt_status);
+ wdt_ping();
+
+ return nonseekable_open(inode, file);
+}
+
+static ssize_t stmp3xxx_wdt_write(struct file *file, const char __user *data,
+ size_t len, loff_t *ppos)
+{
+ if (len) {
+ if (!nowayout) {
+ size_t i;
+
+ clear_bit(WDT_OK_TO_CLOSE, &wdt_status);
+
+ for (i = 0; i != len; i++) {
+ char c;
+
+ if (get_user(c, data + i))
+ return -EFAULT;
+ if (c == 'V')
+ set_bit(WDT_OK_TO_CLOSE, &wdt_status);
+ }
+ }
+ wdt_ping();
+ }
+
+ return len;
+}
+
+static struct watchdog_info ident = {
+ .options = WDIOF_CARDRESET |
+ WDIOF_MAGICCLOSE |
+ WDIOF_SETTIMEOUT |
+ WDIOF_KEEPALIVEPING,
+ .identity = "STMP3XXX Watchdog",
+};
+
+static long stmp3xxx_wdt_ioctl(struct file *file, unsigned int cmd,
+ unsigned long arg)
+{
+ void __user *argp = (void __user *)arg;
+ int __user *p = argp;
+ int new_heartbeat, opts;
+ int ret = -ENOTTY;
+
+ switch (cmd) {
+ case WDIOC_GETSUPPORT:
+ ret = copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
+ break;
+
+ case WDIOC_GETSTATUS:
+ ret = put_user(0, p);
+ break;
+
+ case WDIOC_GETBOOTSTATUS:
+ ret = put_user(boot_status, p);
+ break;
+
+ case WDIOC_SETOPTIONS:
+ if (get_user(opts, p)) {
+ ret = -EFAULT;
+ break;
+ }
+ if (opts & WDIOS_DISABLECARD)
+ wdt_disable();
+ else if (opts & WDIOS_ENABLECARD)
+ wdt_ping();
+ else {
+ pr_debug("%s: unknown option 0x%x\n", __func__, opts);
+ ret = -EINVAL;
+ break;
+ }
+ ret = 0;
+ break;
+
+ case WDIOC_KEEPALIVE:
+ wdt_ping();
+ ret = 0;
+ break;
+
+ case WDIOC_SETTIMEOUT:
+ if (get_user(new_heartbeat, p)) {
+ ret = -EFAULT;
+ break;
+ }
+ if (new_heartbeat <= 0 || new_heartbeat > MAX_HEARTBEAT) {
+ ret = -EINVAL;
+ break;
+ }
+
+ heartbeat = new_heartbeat;
+ wdt_ping();
+ /* Fall through */
+
+ case WDIOC_GETTIMEOUT:
+ ret = put_user(heartbeat, p);
+ break;
+ }
+ return ret;
+}
+
+static int stmp3xxx_wdt_release(struct inode *inode, struct file *file)
+{
+ int ret = 0;
+
+ if (!nowayout) {
+ if (!test_bit(WDT_OK_TO_CLOSE, &wdt_status)) {
+ wdt_ping();
+ pr_debug("%s: Device closed unexpectdly\n", __func__);
+ ret = -EINVAL;
+ } else {
+ wdt_disable();
+ clear_bit(WDT_OK_TO_CLOSE, &wdt_status);
+ }
+ }
+ clear_bit(WDT_IN_USE, &wdt_status);
+
+ return ret;
+}
+
+static const struct file_operations stmp3xxx_wdt_fops = {
+ .owner = THIS_MODULE,
+ .llseek = no_llseek,
+ .write = stmp3xxx_wdt_write,
+ .unlocked_ioctl = stmp3xxx_wdt_ioctl,
+ .open = stmp3xxx_wdt_open,
+ .release = stmp3xxx_wdt_release,
+};
+
+static struct miscdevice stmp3xxx_wdt_miscdev = {
+ .minor = WATCHDOG_MINOR,
+ .name = "watchdog",
+ .fops = &stmp3xxx_wdt_fops,
+};
+
+static int __devinit stmp3xxx_wdt_probe(struct platform_device *pdev)
+{
+ int ret = 0;
+
+ if (heartbeat < 1 || heartbeat > MAX_HEARTBEAT)
+ heartbeat = DEFAULT_HEARTBEAT;
+
+ boot_status = __raw_readl(REGS_RTC_BASE + HW_RTC_PERSISTENT1) &
+ BV_RTC_PERSISTENT1_GENERAL__RTC_FORCE_UPDATER;
+ boot_status = !!boot_status;
+ stmp3xxx_clearl(BV_RTC_PERSISTENT1_GENERAL__RTC_FORCE_UPDATER,
+ REGS_RTC_BASE + HW_RTC_PERSISTENT1);
+ wdt_disable(); /* disable for now */
+
+ ret = misc_register(&stmp3xxx_wdt_miscdev);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "cannot register misc device\n");
+ return ret;
+ }
+
+ printk(KERN_INFO "stmp3xxx watchdog: initialized, heartbeat %d sec\n",
+ heartbeat);
+
+ return ret;
+}
+
+static int __devexit stmp3xxx_wdt_remove(struct platform_device *pdev)
+{
+ misc_deregister(&stmp3xxx_wdt_miscdev);
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int wdt_suspended;
+static u32 wdt_saved_time;
+
+static int stmp3xxx_wdt_suspend(struct platform_device *pdev,
+ pm_message_t state)
+{
+ if (__raw_readl(REGS_RTC_BASE + HW_RTC_CTRL) &
+ BM_RTC_CTRL_WATCHDOGEN) {
+ wdt_suspended = 1;
+ wdt_saved_time = __raw_readl(REGS_RTC_BASE + HW_RTC_WATCHDOG);
+ wdt_disable();
+ }
+ return 0;
+}
+
+static int stmp3xxx_wdt_resume(struct platform_device *pdev)
+{
+ if (wdt_suspended) {
+ wdt_enable(wdt_saved_time);
+ wdt_suspended = 0;
+ }
+ return 0;
+}
+#else
+#define stmp3xxx_wdt_suspend NULL
+#define stmp3xxx_wdt_resume NULL
+#endif
+
+static struct platform_driver platform_wdt_driver = {
+ .driver = {
+ .name = "stmp3xxx_wdt",
+ },
+ .probe = stmp3xxx_wdt_probe,
+ .remove = __devexit_p(stmp3xxx_wdt_remove),
+ .suspend = stmp3xxx_wdt_suspend,
+ .resume = stmp3xxx_wdt_resume,
+};
+
+static int __init stmp3xxx_wdt_init(void)
+{
+ return platform_driver_register(&platform_wdt_driver);
+}
+
+static void __exit stmp3xxx_wdt_exit(void)
+{
+ return platform_driver_unregister(&platform_wdt_driver);
+}
+
+module_init(stmp3xxx_wdt_init);
+module_exit(stmp3xxx_wdt_exit);
+
+MODULE_DESCRIPTION("STMP3XXX Watchdog Driver");
+MODULE_LICENSE("GPL");
+
+module_param(heartbeat, int, 0);
+MODULE_PARM_DESC(heartbeat,
+ "Watchdog heartbeat period in seconds from 1 to "
+ __MODULE_STRING(MAX_HEARTBEAT) ", default "
+ __MODULE_STRING(DEFAULT_HEARTBEAT));
+
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
diff --git a/drivers/watchdog/twl4030_wdt.c b/drivers/watchdog/twl4030_wdt.c
new file mode 100644
index 0000000..cb46556
--- /dev/null
+++ b/drivers/watchdog/twl4030_wdt.c
@@ -0,0 +1,272 @@
+/*
+ * Copyright (C) Nokia Corporation
+ *
+ * Written by Timo Kokkonen <timo.t.kokkonen at nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/watchdog.h>
+#include <linux/platform_device.h>
+#include <linux/miscdevice.h>
+#include <linux/uaccess.h>
+#include <linux/i2c/twl4030.h>
+
+#define TWL4030_WATCHDOG_CFG_REG_OFFS 0x3
+
+#define TWL4030_WDT_STATE_OPEN 0x1
+#define TWL4030_WDT_STATE_ACTIVE 0x8
+
+static struct platform_device *twl4030_wdt_dev;
+
+struct twl4030_wdt {
+ struct miscdevice miscdev;
+ int timer_margin;
+ unsigned long state;
+};
+
+static int nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, int, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started "
+ "(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+static int twl4030_wdt_write(unsigned char val)
+{
+ return twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, val,
+ TWL4030_WATCHDOG_CFG_REG_OFFS);
+}
+
+static int twl4030_wdt_enable(struct twl4030_wdt *wdt)
+{
+ return twl4030_wdt_write(wdt->timer_margin + 1);
+}
+
+static int twl4030_wdt_disable(struct twl4030_wdt *wdt)
+{
+ return twl4030_wdt_write(0);
+}
+
+static int twl4030_wdt_set_timeout(struct twl4030_wdt *wdt, int timeout)
+{
+ if (timeout < 0 || timeout > 30) {
+ dev_warn(wdt->miscdev.parent,
+ "Timeout can only be in the range [0-30] seconds");
+ return -EINVAL;
+ }
+ wdt->timer_margin = timeout;
+ return twl4030_wdt_enable(wdt);
+}
+
+static ssize_t twl4030_wdt_write_fop(struct file *file,
+ const char __user *data, size_t len, loff_t *ppos)
+{
+ struct twl4030_wdt *wdt = file->private_data;
+
+ if (len)
+ twl4030_wdt_enable(wdt);
+
+ return len;
+}
+
+static long twl4030_wdt_ioctl(struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ void __user *argp = (void __user *)arg;
+ int __user *p = argp;
+ int new_margin;
+ struct twl4030_wdt *wdt = file->private_data;
+
+ static const struct watchdog_info twl4030_wd_ident = {
+ .identity = "TWL4030 Watchdog",
+ .options = WDIOF_SETTIMEOUT,
+ .firmware_version = 0,
+ };
+
+ switch (cmd) {
+ case WDIOC_GETSUPPORT:
+ return copy_to_user(argp, &twl4030_wd_ident,
+ sizeof(twl4030_wd_ident)) ? -EFAULT : 0;
+
+ case WDIOC_GETSTATUS:
+ case WDIOC_GETBOOTSTATUS:
+ return put_user(0, p);
+
+ case WDIOC_KEEPALIVE:
+ twl4030_wdt_enable(wdt);
+ break;
+
+ case WDIOC_SETTIMEOUT:
+ if (get_user(new_margin, p))
+ return -EFAULT;
+ if (twl4030_wdt_set_timeout(wdt, new_margin))
+ return -EINVAL;
+ return put_user(wdt->timer_margin, p);
+
+ case WDIOC_GETTIMEOUT:
+ return put_user(wdt->timer_margin, p);
+
+ default:
+ return -ENOTTY;
+ }
+
+ return 0;
+}
+
+static int twl4030_wdt_open(struct inode *inode, struct file *file)
+{
+ struct twl4030_wdt *wdt = platform_get_drvdata(twl4030_wdt_dev);
+
+ /* /dev/watchdog can only be opened once */
+ if (test_and_set_bit(0, &wdt->state))
+ return -EBUSY;
+
+ wdt->state |= TWL4030_WDT_STATE_ACTIVE;
+ file->private_data = (void *) wdt;
+
+ twl4030_wdt_enable(wdt);
+ return nonseekable_open(inode, file);
+}
+
+static int twl4030_wdt_release(struct inode *inode, struct file *file)
+{
+ struct twl4030_wdt *wdt = file->private_data;
+ if (nowayout) {
+ dev_alert(wdt->miscdev.parent,
+ "Unexpected close, watchdog still running!\n");
+ twl4030_wdt_enable(wdt);
+ } else {
+ if (twl4030_wdt_disable(wdt))
+ return -EFAULT;
+ wdt->state &= ~TWL4030_WDT_STATE_ACTIVE;
+ }
+
+ clear_bit(0, &wdt->state);
+ return 0;
+}
+
+static const struct file_operations twl4030_wdt_fops = {
+ .owner = THIS_MODULE,
+ .llseek = no_llseek,
+ .open = twl4030_wdt_open,
+ .release = twl4030_wdt_release,
+ .unlocked_ioctl = twl4030_wdt_ioctl,
+ .write = twl4030_wdt_write_fop,
+};
+
+static int __devinit twl4030_wdt_probe(struct platform_device *pdev)
+{
+ int ret = 0;
+ struct twl4030_wdt *wdt;
+
+ wdt = kzalloc(sizeof(struct twl4030_wdt), GFP_KERNEL);
+ if (!wdt)
+ return -ENOMEM;
+
+ wdt->state = 0;
+ wdt->timer_margin = 30;
+ wdt->miscdev.parent = &pdev->dev;
+ wdt->miscdev.fops = &twl4030_wdt_fops;
+ wdt->miscdev.minor = WATCHDOG_MINOR;
+ wdt->miscdev.name = "watchdog";
+
+ platform_set_drvdata(pdev, wdt);
+
+ twl4030_wdt_dev = pdev;
+
+ ret = misc_register(&wdt->miscdev);
+ if (ret) {
+ dev_err(wdt->miscdev.parent,
+ "Failed to register misc device\n");
+ platform_set_drvdata(pdev, NULL);
+ kfree(wdt);
+ twl4030_wdt_dev = NULL;
+ return ret;
+ }
+ return 0;
+}
+
+static int __devexit twl4030_wdt_remove(struct platform_device *pdev)
+{
+ struct twl4030_wdt *wdt = platform_get_drvdata(pdev);
+
+ if (wdt->state & TWL4030_WDT_STATE_ACTIVE)
+ if (twl4030_wdt_disable(wdt))
+ return -EFAULT;
+
+ wdt->state &= ~TWL4030_WDT_STATE_ACTIVE;
+ misc_deregister(&wdt->miscdev);
+
+ platform_set_drvdata(pdev, NULL);
+ kfree(wdt);
+ twl4030_wdt_dev = NULL;
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int twl4030_wdt_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ struct twl4030_wdt *wdt = platform_get_drvdata(pdev);
+ if (wdt->state & TWL4030_WDT_STATE_ACTIVE)
+ return twl4030_wdt_disable(wdt);
+
+ return 0;
+}
+
+static int twl4030_wdt_resume(struct platform_device *pdev)
+{
+ struct twl4030_wdt *wdt = platform_get_drvdata(pdev);
+ if (wdt->state & TWL4030_WDT_STATE_ACTIVE)
+ return twl4030_wdt_enable(wdt);
+
+ return 0;
+}
+#else
+#define twl4030_wdt_suspend NULL
+#define twl4030_wdt_resume NULL
+#endif
+
+static struct platform_driver twl4030_wdt_driver = {
+ .probe = twl4030_wdt_probe,
+ .remove = __devexit_p(twl4030_wdt_remove),
+ .suspend = twl4030_wdt_suspend,
+ .resume = twl4030_wdt_resume,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "twl4030_wdt",
+ },
+};
+
+static int __devinit twl4030_wdt_init(void)
+{
+ return platform_driver_register(&twl4030_wdt_driver);
+}
+module_init(twl4030_wdt_init);
+
+static void __devexit twl4030_wdt_exit(void)
+{
+ platform_driver_unregister(&twl4030_wdt_driver);
+}
+module_exit(twl4030_wdt_exit);
+
+MODULE_AUTHOR("Nokia Corporation");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
+MODULE_ALIAS("platform:twl4030_wdt");
+
diff --git a/drivers/watchdog/wdrtas.c b/drivers/watchdog/wdrtas.c
index a4fe7a3..3bde56b 100644
--- a/drivers/watchdog/wdrtas.c
+++ b/drivers/watchdog/wdrtas.c
@@ -218,16 +218,14 @@
*/
static int wdrtas_get_temperature(void)
{
- long result;
+ int result;
int temperature = 0;
- result = rtas_call(wdrtas_token_get_sensor_state, 2, 2,
- (void *)__pa(&temperature),
- WDRTAS_THERMAL_SENSOR, 0);
+ result = rtas_get_sensor(WDRTAS_THERMAL_SENSOR, 0, &temperature);
if (result < 0)
printk(KERN_WARNING "wdrtas: reading the thermal sensor "
- "faild: %li\n", result);
+ "failed: %i\n", result);
else
temperature = ((temperature * 9) / 5) + 32; /* fahrenheit */
diff --git a/drivers/watchdog/wdt_pci.c b/drivers/watchdog/wdt_pci.c
index c45839a..7a1bdc7 100644
--- a/drivers/watchdog/wdt_pci.c
+++ b/drivers/watchdog/wdt_pci.c
@@ -2,7 +2,7 @@
* Industrial Computer Source PCI-WDT500/501 driver
*
* (c) Copyright 1996-1997 Alan Cox <alan@lxorguk.ukuu.org.uk>,
- * All Rights Reserved.
+ * All Rights Reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -99,14 +99,16 @@
"Watchdog cannot be stopped once started (default="
__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
-#ifdef CONFIG_WDT_501_PCI
/* Support for the Fan Tachometer on the PCI-WDT501 */
static int tachometer;
-
module_param(tachometer, int, 0);
MODULE_PARM_DESC(tachometer,
- "PCI-WDT501 Fan Tachometer support (0=disable, default=0)");
-#endif /* CONFIG_WDT_501_PCI */
+ "PCI-WDT501 Fan Tachometer support (0=disable, default=0)");
+
+static int type = 500;
+module_param(type, int, 0);
+MODULE_PARM_DESC(type,
+ "PCI-WDT501 Card type (500 or 501 , default=500)");
/*
* Programming support
@@ -266,22 +268,21 @@
*status |= WDIOF_EXTERN1;
if (new_status & WDC_SR_ISII1)
*status |= WDIOF_EXTERN2;
-#ifdef CONFIG_WDT_501_PCI
- if (!(new_status & WDC_SR_TGOOD))
- *status |= WDIOF_OVERHEAT;
- if (!(new_status & WDC_SR_PSUOVER))
- *status |= WDIOF_POWEROVER;
- if (!(new_status & WDC_SR_PSUUNDR))
- *status |= WDIOF_POWERUNDER;
- if (tachometer) {
- if (!(new_status & WDC_SR_FANGOOD))
- *status |= WDIOF_FANFAULT;
+ if (type == 501) {
+ if (!(new_status & WDC_SR_TGOOD))
+ *status |= WDIOF_OVERHEAT;
+ if (!(new_status & WDC_SR_PSUOVER))
+ *status |= WDIOF_POWEROVER;
+ if (!(new_status & WDC_SR_PSUUNDR))
+ *status |= WDIOF_POWERUNDER;
+ if (tachometer) {
+ if (!(new_status & WDC_SR_FANGOOD))
+ *status |= WDIOF_FANFAULT;
+ }
}
-#endif /* CONFIG_WDT_501_PCI */
return 0;
}
-#ifdef CONFIG_WDT_501_PCI
/**
* wdtpci_get_temperature:
*
@@ -300,7 +301,6 @@
*temperature = (c * 11 / 15) + 7;
return 0;
}
-#endif /* CONFIG_WDT_501_PCI */
/**
* wdtpci_interrupt:
@@ -327,22 +327,22 @@
printk(KERN_CRIT PFX "status %d\n", status);
-#ifdef CONFIG_WDT_501_PCI
- if (!(status & WDC_SR_TGOOD)) {
- u8 alarm = inb(WDT_RT);
- printk(KERN_CRIT PFX "Overheat alarm.(%d)\n", alarm);
- udelay(8);
+ if (type == 501) {
+ if (!(status & WDC_SR_TGOOD)) {
+ printk(KERN_CRIT PFX "Overheat alarm.(%d)\n",
+ inb(WDT_RT));
+ udelay(8);
+ }
+ if (!(status & WDC_SR_PSUOVER))
+ printk(KERN_CRIT PFX "PSU over voltage.\n");
+ if (!(status & WDC_SR_PSUUNDR))
+ printk(KERN_CRIT PFX "PSU under voltage.\n");
+ if (tachometer) {
+ if (!(status & WDC_SR_FANGOOD))
+ printk(KERN_CRIT PFX "Possible fan fault.\n");
+ }
}
- if (!(status & WDC_SR_PSUOVER))
- printk(KERN_CRIT PFX "PSU over voltage.\n");
- if (!(status & WDC_SR_PSUUNDR))
- printk(KERN_CRIT PFX "PSU under voltage.\n");
- if (tachometer) {
- if (!(status & WDC_SR_FANGOOD))
- printk(KERN_CRIT PFX "Possible fan fault.\n");
- }
-#endif /* CONFIG_WDT_501_PCI */
- if (!(status&WDC_SR_WCCR)) {
+ if (!(status & WDC_SR_WCCR)) {
#ifdef SOFTWARE_REBOOT
#ifdef ONLY_TESTING
printk(KERN_CRIT PFX "Would Reboot.\n");
@@ -371,12 +371,13 @@
*/
static ssize_t wdtpci_write(struct file *file, const char __user *buf,
- size_t count, loff_t *ppos)
+ size_t count, loff_t *ppos)
{
if (count) {
if (!nowayout) {
size_t i;
+ /* In case it was set long ago */
expect_close = 0;
for (i = 0; i != count; i++) {
@@ -406,10 +407,10 @@
static long wdtpci_ioctl(struct file *file, unsigned int cmd,
unsigned long arg)
{
- int new_heartbeat;
- int status;
void __user *argp = (void __user *)arg;
int __user *p = argp;
+ int new_heartbeat;
+ int status;
static struct watchdog_info ident = {
.options = WDIOF_SETTIMEOUT|
@@ -421,11 +422,12 @@
/* Add options according to the card we have */
ident.options |= (WDIOF_EXTERN1|WDIOF_EXTERN2);
-#ifdef CONFIG_WDT_501_PCI
- ident.options |= (WDIOF_OVERHEAT|WDIOF_POWERUNDER|WDIOF_POWEROVER);
- if (tachometer)
- ident.options |= WDIOF_FANFAULT;
-#endif /* CONFIG_WDT_501_PCI */
+ if (type == 501) {
+ ident.options |= (WDIOF_OVERHEAT|WDIOF_POWERUNDER|
+ WDIOF_POWEROVER);
+ if (tachometer)
+ ident.options |= WDIOF_FANFAULT;
+ }
switch (cmd) {
case WDIOC_GETSUPPORT:
@@ -503,7 +505,6 @@
return 0;
}
-#ifdef CONFIG_WDT_501_PCI
/**
* wdtpci_temp_read:
* @file: file handle to the watchdog board
@@ -554,7 +555,6 @@
{
return 0;
}
-#endif /* CONFIG_WDT_501_PCI */
/**
* notify_sys:
@@ -596,7 +596,6 @@
.fops = &wdtpci_fops,
};
-#ifdef CONFIG_WDT_501_PCI
static const struct file_operations wdtpci_temp_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
@@ -610,7 +609,6 @@
.name = "temperature",
.fops = &wdtpci_temp_fops,
};
-#endif /* CONFIG_WDT_501_PCI */
/*
* The WDT card needs to learn about soft shutdowns in order to
@@ -633,6 +631,11 @@
return -ENODEV;
}
+ if (type != 500 && type != 501) {
+ printk(KERN_ERR PFX "unknown card type '%d'.\n", type);
+ return -ENODEV;
+ }
+
if (pci_enable_device(dev)) {
printk(KERN_ERR PFX "Not possible to enable PCI Device\n");
return -ENODEV;
@@ -678,15 +681,15 @@
goto out_irq;
}
-#ifdef CONFIG_WDT_501_PCI
- ret = misc_register(&temp_miscdev);
- if (ret) {
- printk(KERN_ERR PFX
+ if (type == 501) {
+ ret = misc_register(&temp_miscdev);
+ if (ret) {
+ printk(KERN_ERR PFX
"cannot register miscdev on minor=%d (err=%d)\n",
- TEMP_MINOR, ret);
- goto out_rbt;
+ TEMP_MINOR, ret);
+ goto out_rbt;
+ }
}
-#endif /* CONFIG_WDT_501_PCI */
ret = misc_register(&wdtpci_miscdev);
if (ret) {
@@ -698,20 +701,18 @@
printk(KERN_INFO PFX "initialized. heartbeat=%d sec (nowayout=%d)\n",
heartbeat, nowayout);
-#ifdef CONFIG_WDT_501_PCI
- printk(KERN_INFO "wdt: Fan Tachometer is %s\n",
+ if (type == 501)
+ printk(KERN_INFO "wdt: Fan Tachometer is %s\n",
(tachometer ? "Enabled" : "Disabled"));
-#endif /* CONFIG_WDT_501_PCI */
ret = 0;
out:
return ret;
out_misc:
-#ifdef CONFIG_WDT_501_PCI
- misc_deregister(&temp_miscdev);
+ if (type == 501)
+ misc_deregister(&temp_miscdev);
out_rbt:
-#endif /* CONFIG_WDT_501_PCI */
unregister_reboot_notifier(&wdtpci_notifier);
out_irq:
free_irq(irq, &wdtpci_miscdev);
@@ -728,9 +729,8 @@
/* here we assume only one device will ever have
* been picked up and registered by probe function */
misc_deregister(&wdtpci_miscdev);
-#ifdef CONFIG_WDT_501_PCI
- misc_deregister(&temp_miscdev);
-#endif /* CONFIG_WDT_501_PCI */
+ if (type == 501)
+ misc_deregister(&temp_miscdev);
unregister_reboot_notifier(&wdtpci_notifier);
free_irq(irq, &wdtpci_miscdev);
release_region(io, 16);
diff --git a/fs/btrfs/acl.c b/fs/btrfs/acl.c
index 6039725..f128427 100644
--- a/fs/btrfs/acl.c
+++ b/fs/btrfs/acl.c
@@ -29,51 +29,28 @@
#ifdef CONFIG_FS_POSIX_ACL
-static void btrfs_update_cached_acl(struct inode *inode,
- struct posix_acl **p_acl,
- struct posix_acl *acl)
-{
- spin_lock(&inode->i_lock);
- if (*p_acl && *p_acl != BTRFS_ACL_NOT_CACHED)
- posix_acl_release(*p_acl);
- *p_acl = posix_acl_dup(acl);
- spin_unlock(&inode->i_lock);
-}
-
static struct posix_acl *btrfs_get_acl(struct inode *inode, int type)
{
int size;
const char *name;
char *value = NULL;
- struct posix_acl *acl = NULL, **p_acl;
+ struct posix_acl *acl;
+
+ acl = get_cached_acl(inode, type);
+ if (acl != ACL_NOT_CACHED)
+ return acl;
switch (type) {
case ACL_TYPE_ACCESS:
name = POSIX_ACL_XATTR_ACCESS;
- p_acl = &BTRFS_I(inode)->i_acl;
break;
case ACL_TYPE_DEFAULT:
name = POSIX_ACL_XATTR_DEFAULT;
- p_acl = &BTRFS_I(inode)->i_default_acl;
break;
default:
- return ERR_PTR(-EINVAL);
+ BUG();
}
- /* Handle the cached NULL acl case without locking */
- acl = ACCESS_ONCE(*p_acl);
- if (!acl)
- return acl;
-
- spin_lock(&inode->i_lock);
- acl = *p_acl;
- if (acl != BTRFS_ACL_NOT_CACHED)
- acl = posix_acl_dup(acl);
- spin_unlock(&inode->i_lock);
-
- if (acl != BTRFS_ACL_NOT_CACHED)
- return acl;
-
size = __btrfs_getxattr(inode, name, "", 0);
if (size > 0) {
value = kzalloc(size, GFP_NOFS);
@@ -82,13 +59,13 @@
size = __btrfs_getxattr(inode, name, value, size);
if (size > 0) {
acl = posix_acl_from_xattr(value, size);
- btrfs_update_cached_acl(inode, p_acl, acl);
+ set_cached_acl(inode, type, acl);
}
kfree(value);
} else if (size == -ENOENT || size == -ENODATA || size == 0) {
/* FIXME, who returns -ENOENT? I think nobody */
acl = NULL;
- btrfs_update_cached_acl(inode, p_acl, acl);
+ set_cached_acl(inode, type, acl);
} else {
acl = ERR_PTR(-EIO);
}
@@ -121,7 +98,6 @@
{
int ret, size = 0;
const char *name;
- struct posix_acl **p_acl;
char *value = NULL;
mode_t mode;
@@ -141,13 +117,11 @@
ret = 0;
inode->i_mode = mode;
name = POSIX_ACL_XATTR_ACCESS;
- p_acl = &BTRFS_I(inode)->i_acl;
break;
case ACL_TYPE_DEFAULT:
if (!S_ISDIR(inode->i_mode))
return acl ? -EINVAL : 0;
name = POSIX_ACL_XATTR_DEFAULT;
- p_acl = &BTRFS_I(inode)->i_default_acl;
break;
default:
return -EINVAL;
@@ -172,7 +146,7 @@
kfree(value);
if (!ret)
- btrfs_update_cached_acl(inode, p_acl, acl);
+ set_cached_acl(inode, type, acl);
return ret;
}
diff --git a/fs/btrfs/btrfs_inode.h b/fs/btrfs/btrfs_inode.h
index acb4f35..ea1ea0a 100644
--- a/fs/btrfs/btrfs_inode.h
+++ b/fs/btrfs/btrfs_inode.h
@@ -53,10 +53,6 @@
/* used to order data wrt metadata */
struct btrfs_ordered_inode_tree ordered_tree;
- /* standard acl pointers */
- struct posix_acl *i_acl;
- struct posix_acl *i_default_acl;
-
/* for keeping track of orphaned inodes */
struct list_head i_orphan;
diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h
index 03441a9..2779c2f 100644
--- a/fs/btrfs/ctree.h
+++ b/fs/btrfs/ctree.h
@@ -41,8 +41,6 @@
#define BTRFS_MAGIC "_BHRfS_M"
-#define BTRFS_ACL_NOT_CACHED ((void *)-1)
-
#define BTRFS_MAX_LEVEL 8
#define BTRFS_COMPAT_EXTENT_TREE_V0
diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index 8612b3a..dbe1aab 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -2122,10 +2122,8 @@
* any xattrs or acls
*/
maybe_acls = acls_after_inode_item(leaf, path->slots[0], inode->i_ino);
- if (!maybe_acls) {
- BTRFS_I(inode)->i_acl = NULL;
- BTRFS_I(inode)->i_default_acl = NULL;
- }
+ if (!maybe_acls)
+ cache_no_acl(inode);
BTRFS_I(inode)->block_group = btrfs_find_block_group(root, 0,
alloc_group_block, 0);
@@ -3141,9 +3139,6 @@
{
struct btrfs_inode *bi = BTRFS_I(inode);
- bi->i_acl = BTRFS_ACL_NOT_CACHED;
- bi->i_default_acl = BTRFS_ACL_NOT_CACHED;
-
bi->generation = 0;
bi->sequence = 0;
bi->last_trans = 0;
@@ -4640,8 +4635,6 @@
ei->last_trans = 0;
ei->logged_trans = 0;
btrfs_ordered_inode_tree_init(&ei->ordered_tree);
- ei->i_acl = BTRFS_ACL_NOT_CACHED;
- ei->i_default_acl = BTRFS_ACL_NOT_CACHED;
INIT_LIST_HEAD(&ei->i_orphan);
INIT_LIST_HEAD(&ei->ordered_operations);
return &ei->vfs_inode;
@@ -4655,13 +4648,6 @@
WARN_ON(!list_empty(&inode->i_dentry));
WARN_ON(inode->i_data.nrpages);
- if (BTRFS_I(inode)->i_acl &&
- BTRFS_I(inode)->i_acl != BTRFS_ACL_NOT_CACHED)
- posix_acl_release(BTRFS_I(inode)->i_acl);
- if (BTRFS_I(inode)->i_default_acl &&
- BTRFS_I(inode)->i_default_acl != BTRFS_ACL_NOT_CACHED)
- posix_acl_release(BTRFS_I(inode)->i_default_acl);
-
/*
* Make sure we're properly removed from the ordered operation
* lists.
diff --git a/fs/cifs/CHANGES b/fs/cifs/CHANGES
index b486898..3a9b7a5 100644
--- a/fs/cifs/CHANGES
+++ b/fs/cifs/CHANGES
@@ -5,7 +5,7 @@
on by default if server supports it). Add forceuid and forcegid
mount options (so that when negotiating unix extensions specifying
which uid mounted does not immediately force the server's reported
-uids to be overridden).
+uids to be overridden). Add support for scope moutn parm.
Version 1.58
------------
diff --git a/fs/cifs/asn1.c b/fs/cifs/asn1.c
index 1b09f16..20692fb 100644
--- a/fs/cifs/asn1.c
+++ b/fs/cifs/asn1.c
@@ -49,6 +49,7 @@
#define ASN1_OJI 6 /* Object Identifier */
#define ASN1_OJD 7 /* Object Description */
#define ASN1_EXT 8 /* External */
+#define ASN1_ENUM 10 /* Enumerated */
#define ASN1_SEQ 16 /* Sequence */
#define ASN1_SET 17 /* Set */
#define ASN1_NUMSTR 18 /* Numerical String */
@@ -78,10 +79,12 @@
#define SPNEGO_OID_LEN 7
#define NTLMSSP_OID_LEN 10
#define KRB5_OID_LEN 7
+#define KRB5U2U_OID_LEN 8
#define MSKRB5_OID_LEN 7
static unsigned long SPNEGO_OID[7] = { 1, 3, 6, 1, 5, 5, 2 };
static unsigned long NTLMSSP_OID[10] = { 1, 3, 6, 1, 4, 1, 311, 2, 2, 10 };
static unsigned long KRB5_OID[7] = { 1, 2, 840, 113554, 1, 2, 2 };
+static unsigned long KRB5U2U_OID[8] = { 1, 2, 840, 113554, 1, 2, 2, 3 };
static unsigned long MSKRB5_OID[7] = { 1, 2, 840, 48018, 1, 2, 2 };
/*
@@ -122,6 +125,28 @@
return 1;
}
+#if 0 /* will be needed later by spnego decoding/encoding of ntlmssp */
+static unsigned char
+asn1_enum_decode(struct asn1_ctx *ctx, __le32 *val)
+{
+ unsigned char ch;
+
+ if (ctx->pointer >= ctx->end) {
+ ctx->error = ASN1_ERR_DEC_EMPTY;
+ return 0;
+ }
+
+ ch = *(ctx->pointer)++; /* ch has 0xa, ptr points to lenght octet */
+ if ((ch) == ASN1_ENUM) /* if ch value is ENUM, 0xa */
+ *val = *(++(ctx->pointer)); /* value has enum value */
+ else
+ return 0;
+
+ ctx->pointer++;
+ return 1;
+}
+#endif
+
static unsigned char
asn1_tag_decode(struct asn1_ctx *ctx, unsigned int *tag)
{
@@ -476,10 +501,9 @@
unsigned int cls, con, tag, oidlen, rc;
bool use_ntlmssp = false;
bool use_kerberos = false;
+ bool use_kerberosu2u = false;
bool use_mskerberos = false;
- *secType = NTLM; /* BB eventually make Kerberos or NLTMSSP the default*/
-
/* cifs_dump_mem(" Received SecBlob ", security_blob, length); */
asn1_open(&ctx, security_blob, length);
@@ -515,6 +539,7 @@
return 0;
}
+ /* SPNEGO */
if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
cFYI(1, ("Error decoding negTokenInit"));
return 0;
@@ -526,6 +551,7 @@
return 0;
}
+ /* negTokenInit */
if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
cFYI(1, ("Error decoding negTokenInit"));
return 0;
@@ -537,6 +563,7 @@
return 0;
}
+ /* sequence */
if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
cFYI(1, ("Error decoding 2nd part of negTokenInit"));
return 0;
@@ -548,6 +575,7 @@
return 0;
}
+ /* sequence of */
if (asn1_header_decode
(&ctx, &sequence_end, &cls, &con, &tag) == 0) {
cFYI(1, ("Error decoding 2nd part of negTokenInit"));
@@ -560,6 +588,7 @@
return 0;
}
+ /* list of security mechanisms */
while (!asn1_eoc_decode(&ctx, sequence_end)) {
rc = asn1_header_decode(&ctx, &end, &cls, &con, &tag);
if (!rc) {
@@ -576,11 +605,15 @@
if (compare_oid(oid, oidlen, MSKRB5_OID,
MSKRB5_OID_LEN) &&
- !use_kerberos)
+ !use_mskerberos)
use_mskerberos = true;
+ else if (compare_oid(oid, oidlen, KRB5U2U_OID,
+ KRB5U2U_OID_LEN) &&
+ !use_kerberosu2u)
+ use_kerberosu2u = true;
else if (compare_oid(oid, oidlen, KRB5_OID,
KRB5_OID_LEN) &&
- !use_mskerberos)
+ !use_kerberos)
use_kerberos = true;
else if (compare_oid(oid, oidlen, NTLMSSP_OID,
NTLMSSP_OID_LEN))
@@ -593,7 +626,12 @@
}
}
+ /* mechlistMIC */
if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
+ /* Check if we have reached the end of the blob, but with
+ no mechListMic (e.g. NTLMSSP instead of KRB5) */
+ if (ctx.error == ASN1_ERR_DEC_EMPTY)
+ goto decode_negtoken_exit;
cFYI(1, ("Error decoding last part negTokenInit exit3"));
return 0;
} else if ((cls != ASN1_CTX) || (con != ASN1_CON)) {
@@ -602,6 +640,8 @@
cls, con, tag, end, *end));
return 0;
}
+
+ /* sequence */
if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
cFYI(1, ("Error decoding last part negTokenInit exit5"));
return 0;
@@ -611,6 +651,7 @@
cls, con, tag, end, *end));
}
+ /* sequence of */
if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
cFYI(1, ("Error decoding last part negTokenInit exit 7"));
return 0;
@@ -619,6 +660,8 @@
cls, con, tag, end, *end));
return 0;
}
+
+ /* general string */
if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
cFYI(1, ("Error decoding last part negTokenInit exit9"));
return 0;
@@ -630,13 +673,13 @@
}
cFYI(1, ("Need to call asn1_octets_decode() function for %s",
ctx.pointer)); /* is this UTF-8 or ASCII? */
-
+decode_negtoken_exit:
if (use_kerberos)
*secType = Kerberos;
else if (use_mskerberos)
*secType = MSKerberos;
else if (use_ntlmssp)
- *secType = NTLMSSP;
+ *secType = RawNTLMSSP;
return 1;
}
diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c
index 0d92114..9f669f9 100644
--- a/fs/cifs/cifsfs.c
+++ b/fs/cifs/cifsfs.c
@@ -333,6 +333,27 @@
kmem_cache_free(cifs_inode_cachep, CIFS_I(inode));
}
+static void
+cifs_show_address(struct seq_file *s, struct TCP_Server_Info *server)
+{
+ seq_printf(s, ",addr=");
+
+ switch (server->addr.sockAddr.sin_family) {
+ case AF_INET:
+ seq_printf(s, "%pI4", &server->addr.sockAddr.sin_addr.s_addr);
+ break;
+ case AF_INET6:
+ seq_printf(s, "%pI6",
+ &server->addr.sockAddr6.sin6_addr.s6_addr);
+ if (server->addr.sockAddr6.sin6_scope_id)
+ seq_printf(s, "%%%u",
+ server->addr.sockAddr6.sin6_scope_id);
+ break;
+ default:
+ seq_printf(s, "(unknown)");
+ }
+}
+
/*
* cifs_show_options() is for displaying mount options in /proc/mounts.
* Not all settable options are displayed but most of the important
@@ -343,83 +364,64 @@
{
struct cifs_sb_info *cifs_sb;
struct cifsTconInfo *tcon;
- struct TCP_Server_Info *server;
cifs_sb = CIFS_SB(m->mnt_sb);
+ tcon = cifs_sb->tcon;
- if (cifs_sb) {
- tcon = cifs_sb->tcon;
- if (tcon) {
- seq_printf(s, ",unc=%s", cifs_sb->tcon->treeName);
- if (tcon->ses) {
- if (tcon->ses->userName)
- seq_printf(s, ",username=%s",
- tcon->ses->userName);
- if (tcon->ses->domainName)
- seq_printf(s, ",domain=%s",
- tcon->ses->domainName);
- server = tcon->ses->server;
- if (server) {
- seq_printf(s, ",addr=");
- switch (server->addr.sockAddr6.
- sin6_family) {
- case AF_INET6:
- seq_printf(s, "%pI6",
- &server->addr.sockAddr6.sin6_addr);
- break;
- case AF_INET:
- seq_printf(s, "%pI4",
- &server->addr.sockAddr.sin_addr.s_addr);
- break;
- }
- }
- }
- if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_OVERR_UID) ||
- !(tcon->unix_ext))
- seq_printf(s, ",uid=%d", cifs_sb->mnt_uid);
- if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_OVERR_GID) ||
- !(tcon->unix_ext))
- seq_printf(s, ",gid=%d", cifs_sb->mnt_gid);
- if (!tcon->unix_ext) {
- seq_printf(s, ",file_mode=0%o,dir_mode=0%o",
+ seq_printf(s, ",unc=%s", cifs_sb->tcon->treeName);
+ if (tcon->ses->userName)
+ seq_printf(s, ",username=%s", tcon->ses->userName);
+ if (tcon->ses->domainName)
+ seq_printf(s, ",domain=%s", tcon->ses->domainName);
+
+ seq_printf(s, ",uid=%d", cifs_sb->mnt_uid);
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_OVERR_UID)
+ seq_printf(s, ",forceuid");
+
+ seq_printf(s, ",gid=%d", cifs_sb->mnt_gid);
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_OVERR_GID)
+ seq_printf(s, ",forcegid");
+
+ cifs_show_address(s, tcon->ses->server);
+
+ if (!tcon->unix_ext)
+ seq_printf(s, ",file_mode=0%o,dir_mode=0%o",
cifs_sb->mnt_file_mode,
cifs_sb->mnt_dir_mode);
- }
- if (tcon->seal)
- seq_printf(s, ",seal");
- if (tcon->nocase)
- seq_printf(s, ",nocase");
- if (tcon->retry)
- seq_printf(s, ",hard");
- }
- if (cifs_sb->prepath)
- seq_printf(s, ",prepath=%s", cifs_sb->prepath);
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_POSIX_PATHS)
- seq_printf(s, ",posixpaths");
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID)
- seq_printf(s, ",setuids");
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM)
- seq_printf(s, ",serverino");
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DIRECT_IO)
- seq_printf(s, ",directio");
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_XATTR)
- seq_printf(s, ",nouser_xattr");
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR)
- seq_printf(s, ",mapchars");
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL)
- seq_printf(s, ",sfu");
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_BRL)
- seq_printf(s, ",nobrl");
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL)
- seq_printf(s, ",cifsacl");
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DYNPERM)
- seq_printf(s, ",dynperm");
- if (m->mnt_sb->s_flags & MS_POSIXACL)
- seq_printf(s, ",acl");
+ if (tcon->seal)
+ seq_printf(s, ",seal");
+ if (tcon->nocase)
+ seq_printf(s, ",nocase");
+ if (tcon->retry)
+ seq_printf(s, ",hard");
+ if (cifs_sb->prepath)
+ seq_printf(s, ",prepath=%s", cifs_sb->prepath);
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_POSIX_PATHS)
+ seq_printf(s, ",posixpaths");
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID)
+ seq_printf(s, ",setuids");
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM)
+ seq_printf(s, ",serverino");
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DIRECT_IO)
+ seq_printf(s, ",directio");
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_XATTR)
+ seq_printf(s, ",nouser_xattr");
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR)
+ seq_printf(s, ",mapchars");
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL)
+ seq_printf(s, ",sfu");
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_BRL)
+ seq_printf(s, ",nobrl");
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL)
+ seq_printf(s, ",cifsacl");
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DYNPERM)
+ seq_printf(s, ",dynperm");
+ if (m->mnt_sb->s_flags & MS_POSIXACL)
+ seq_printf(s, ",acl");
- seq_printf(s, ",rsize=%d", cifs_sb->rsize);
- seq_printf(s, ",wsize=%d", cifs_sb->wsize);
- }
+ seq_printf(s, ",rsize=%d", cifs_sb->rsize);
+ seq_printf(s, ",wsize=%d", cifs_sb->wsize);
+
return 0;
}
@@ -535,9 +537,14 @@
if (tcon == NULL)
return;
- lock_kernel();
read_lock(&cifs_tcp_ses_lock);
- if (tcon->tc_count == 1)
+ if ((tcon->tc_count > 1) || (tcon->tidStatus == CifsExiting)) {
+ /* we have other mounts to same share or we have
+ already tried to force umount this and woken up
+ all waiting network requests, nothing to do */
+ read_unlock(&cifs_tcp_ses_lock);
+ return;
+ } else if (tcon->tc_count == 1)
tcon->tidStatus = CifsExiting;
read_unlock(&cifs_tcp_ses_lock);
@@ -552,9 +559,7 @@
wake_up_all(&tcon->ses->server->response_q);
msleep(1);
}
-/* BB FIXME - finish add checks for tidStatus BB */
- unlock_kernel();
return;
}
diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h
index a61ab77..e1225e6 100644
--- a/fs/cifs/cifsglob.h
+++ b/fs/cifs/cifsglob.h
@@ -83,7 +83,7 @@
NTLM, /* Legacy NTLM012 auth with NTLM hash */
NTLMv2, /* Legacy NTLM auth with NTLMv2 hash */
RawNTLMSSP, /* NTLMSSP without SPNEGO, NTLMv2 hash */
- NTLMSSP, /* NTLMSSP via SPNEGO, NTLMv2 hash */
+/* NTLMSSP, */ /* can use rawNTLMSSP instead of NTLMSSP via SPNEGO */
Kerberos, /* Kerberos via SPNEGO */
MSKerberos, /* MS Kerberos via SPNEGO */
};
diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h
index f945232..c419416 100644
--- a/fs/cifs/cifsproto.h
+++ b/fs/cifs/cifsproto.h
@@ -74,7 +74,7 @@
extern unsigned int smbCalcSize_LE(struct smb_hdr *ptr);
extern int decode_negTokenInit(unsigned char *security_blob, int length,
enum securityEnum *secType);
-extern int cifs_inet_pton(const int, const char *source, void *dst);
+extern int cifs_convert_address(char *src, void *dst);
extern int map_smb_to_linux_error(struct smb_hdr *smb, int logErr);
extern void header_assemble(struct smb_hdr *, char /* command */ ,
const struct cifsTconInfo *, int /* length of
diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index b84c61d..61007c6 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -594,7 +594,7 @@
else if (secFlags & CIFSSEC_MAY_KRB5)
server->secType = Kerberos;
else if (secFlags & CIFSSEC_MAY_NTLMSSP)
- server->secType = NTLMSSP;
+ server->secType = RawNTLMSSP;
else if (secFlags & CIFSSEC_MAY_LANMAN)
server->secType = LANMAN;
/* #ifdef CONFIG_CIFS_EXPERIMENTAL
@@ -729,7 +729,7 @@
* the tcon is no longer on the list, so no need to take lock before
* checking this.
*/
- if (tcon->need_reconnect)
+ if ((tcon->need_reconnect) || (tcon->ses->need_reconnect))
return 0;
rc = small_smb_init(SMB_COM_TREE_DISCONNECT, 0, tcon,
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 97f4311..e16d759 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -70,7 +70,6 @@
mode_t file_mode;
mode_t dir_mode;
unsigned secFlg;
- bool rw:1;
bool retry:1;
bool intr:1;
bool setuids:1;
@@ -832,7 +831,6 @@
vol->dir_mode = vol->file_mode = S_IRUGO | S_IXUGO | S_IWUSR;
/* vol->retry default is 0 (i.e. "soft" limited retry not hard retry) */
- vol->rw = true;
/* default is always to request posix paths. */
vol->posix_paths = 1;
/* default to using server inode numbers where available */
@@ -1199,7 +1197,9 @@
} else if (strnicmp(data, "guest", 5) == 0) {
/* ignore */
} else if (strnicmp(data, "rw", 2) == 0) {
- vol->rw = true;
+ /* ignore */
+ } else if (strnicmp(data, "ro", 2) == 0) {
+ /* ignore */
} else if (strnicmp(data, "noblocksend", 11) == 0) {
vol->noblocksnd = 1;
} else if (strnicmp(data, "noautotune", 10) == 0) {
@@ -1218,8 +1218,6 @@
parse these options again and set anything and it
is ok to just ignore them */
continue;
- } else if (strnicmp(data, "ro", 2) == 0) {
- vol->rw = false;
} else if (strnicmp(data, "hard", 4) == 0) {
vol->retry = 1;
} else if (strnicmp(data, "soft", 4) == 0) {
@@ -1386,8 +1384,10 @@
server->addr.sockAddr.sin_addr.s_addr))
continue;
else if (addr->ss_family == AF_INET6 &&
- !ipv6_addr_equal(&server->addr.sockAddr6.sin6_addr,
- &addr6->sin6_addr))
+ (!ipv6_addr_equal(&server->addr.sockAddr6.sin6_addr,
+ &addr6->sin6_addr) ||
+ server->addr.sockAddr6.sin6_scope_id !=
+ addr6->sin6_scope_id))
continue;
++server->srv_count;
@@ -1433,28 +1433,15 @@
memset(&addr, 0, sizeof(struct sockaddr_storage));
+ cFYI(1, ("UNC: %s ip: %s", volume_info->UNC, volume_info->UNCip));
+
if (volume_info->UNCip && volume_info->UNC) {
- rc = cifs_inet_pton(AF_INET, volume_info->UNCip,
- &sin_server->sin_addr.s_addr);
-
- if (rc <= 0) {
- /* not ipv4 address, try ipv6 */
- rc = cifs_inet_pton(AF_INET6, volume_info->UNCip,
- &sin_server6->sin6_addr.in6_u);
- if (rc > 0)
- addr.ss_family = AF_INET6;
- } else {
- addr.ss_family = AF_INET;
- }
-
- if (rc <= 0) {
+ rc = cifs_convert_address(volume_info->UNCip, &addr);
+ if (!rc) {
/* we failed translating address */
rc = -EINVAL;
goto out_err;
}
-
- cFYI(1, ("UNC: %s ip: %s", volume_info->UNC,
- volume_info->UNCip));
} else if (volume_info->UNCip) {
/* BB using ip addr as tcp_ses name to connect to the
DFS root below */
@@ -1513,14 +1500,14 @@
cFYI(1, ("attempting ipv6 connect"));
/* BB should we allow ipv6 on port 139? */
/* other OS never observed in Wild doing 139 with v6 */
+ sin_server6->sin6_port = htons(volume_info->port);
memcpy(&tcp_ses->addr.sockAddr6, sin_server6,
sizeof(struct sockaddr_in6));
- sin_server6->sin6_port = htons(volume_info->port);
rc = ipv6_connect(tcp_ses);
} else {
+ sin_server->sin_port = htons(volume_info->port);
memcpy(&tcp_ses->addr.sockAddr, sin_server,
sizeof(struct sockaddr_in));
- sin_server->sin_port = htons(volume_info->port);
rc = ipv4_connect(tcp_ses);
}
if (rc < 0) {
diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c
index 3758965d..7dc6b74 100644
--- a/fs/cifs/dir.c
+++ b/fs/cifs/dir.c
@@ -307,8 +307,9 @@
full_path = build_path_from_dentry(direntry);
if (full_path == NULL) {
+ rc = -ENOMEM;
FreeXid(xid);
- return -ENOMEM;
+ return rc;
}
if (oplockEnabled)
@@ -540,8 +541,9 @@
buf = kmalloc(sizeof(FILE_ALL_INFO), GFP_KERNEL);
if (buf == NULL) {
kfree(full_path);
+ rc = -ENOMEM;
FreeXid(xid);
- return -ENOMEM;
+ return rc;
}
rc = CIFSSMBOpen(xid, pTcon, full_path,
diff --git a/fs/cifs/dns_resolve.c b/fs/cifs/dns_resolve.c
index df4a306..8794814 100644
--- a/fs/cifs/dns_resolve.c
+++ b/fs/cifs/dns_resolve.c
@@ -35,26 +35,11 @@
* 0 - name is not IP
*/
static int
-is_ip(const char *name)
+is_ip(char *name)
{
- int rc;
- struct sockaddr_in sin_server;
- struct sockaddr_in6 sin_server6;
+ struct sockaddr_storage ss;
- rc = cifs_inet_pton(AF_INET, name,
- &sin_server.sin_addr.s_addr);
-
- if (rc <= 0) {
- /* not ipv4 address, try ipv6 */
- rc = cifs_inet_pton(AF_INET6, name,
- &sin_server6.sin6_addr.in6_u);
- if (rc > 0)
- return 1;
- } else {
- return 1;
- }
- /* we failed translating address */
- return 0;
+ return cifs_convert_address(name, &ss);
}
static int
@@ -72,7 +57,7 @@
ip[datalen] = '\0';
/* make sure this looks like an address */
- if (!is_ip((const char *) ip)) {
+ if (!is_ip(ip)) {
kfree(ip);
return -EINVAL;
}
diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index 0686684..ebdbe62 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -300,14 +300,16 @@
pCifsInode = CIFS_I(file->f_path.dentry->d_inode);
pCifsFile = cifs_fill_filedata(file);
if (pCifsFile) {
+ rc = 0;
FreeXid(xid);
- return 0;
+ return rc;
}
full_path = build_path_from_dentry(file->f_path.dentry);
if (full_path == NULL) {
+ rc = -ENOMEM;
FreeXid(xid);
- return -ENOMEM;
+ return rc;
}
cFYI(1, ("inode = 0x%p file flags are 0x%x for %s",
@@ -494,8 +496,9 @@
mutex_unlock(&pCifsFile->fh_mutex);
if (!pCifsFile->invalidHandle) {
mutex_lock(&pCifsFile->fh_mutex);
+ rc = 0;
FreeXid(xid);
- return 0;
+ return rc;
}
if (file->f_path.dentry == NULL) {
@@ -845,8 +848,9 @@
tcon = cifs_sb->tcon;
if (file->private_data == NULL) {
+ rc = -EBADF;
FreeXid(xid);
- return -EBADF;
+ return rc;
}
netfid = ((struct cifsFileInfo *)file->private_data)->netfid;
@@ -1805,8 +1809,9 @@
pTcon = cifs_sb->tcon;
if (file->private_data == NULL) {
+ rc = -EBADF;
FreeXid(xid);
- return -EBADF;
+ return rc;
}
open_file = (struct cifsFileInfo *)file->private_data;
@@ -1885,8 +1890,9 @@
pTcon = cifs_sb->tcon;
if (file->private_data == NULL) {
+ rc = -EBADF;
FreeXid(xid);
- return -EBADF;
+ return rc;
}
open_file = (struct cifsFileInfo *)file->private_data;
@@ -2019,8 +2025,9 @@
xid = GetXid();
if (file->private_data == NULL) {
+ rc = -EBADF;
FreeXid(xid);
- return -EBADF;
+ return rc;
}
open_file = (struct cifsFileInfo *)file->private_data;
cifs_sb = CIFS_SB(file->f_path.dentry->d_sb);
@@ -2185,8 +2192,9 @@
xid = GetXid();
if (file->private_data == NULL) {
+ rc = -EBADF;
FreeXid(xid);
- return -EBADF;
+ return rc;
}
cFYI(1, ("readpage %p at offset %d 0x%x\n",
diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c
index fad882b..155c9e7 100644
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -988,8 +988,9 @@
* sb->s_vfs_rename_mutex here */
full_path = build_path_from_dentry(dentry);
if (full_path == NULL) {
+ rc = -ENOMEM;
FreeXid(xid);
- return -ENOMEM;
+ return rc;
}
if ((tcon->ses->capabilities & CAP_UNIX) &&
@@ -1118,8 +1119,9 @@
full_path = build_path_from_dentry(direntry);
if (full_path == NULL) {
+ rc = -ENOMEM;
FreeXid(xid);
- return -ENOMEM;
+ return rc;
}
if ((pTcon->ses->capabilities & CAP_UNIX) &&
@@ -1303,8 +1305,9 @@
full_path = build_path_from_dentry(direntry);
if (full_path == NULL) {
+ rc = -ENOMEM;
FreeXid(xid);
- return -ENOMEM;
+ return rc;
}
rc = CIFSSMBRmDir(xid, pTcon, full_path, cifs_sb->local_nls,
@@ -1508,8 +1511,9 @@
since that would deadlock */
full_path = build_path_from_dentry(direntry);
if (full_path == NULL) {
+ rc = -ENOMEM;
FreeXid(xid);
- return -ENOMEM;
+ return rc;
}
cFYI(1, ("Revalidate: %s inode 0x%p count %d dentry: 0x%p d_time %ld "
"jiffies %ld", full_path, direntry->d_inode,
@@ -1911,8 +1915,9 @@
full_path = build_path_from_dentry(direntry);
if (full_path == NULL) {
+ rc = -ENOMEM;
FreeXid(xid);
- return -ENOMEM;
+ return rc;
}
/*
diff --git a/fs/cifs/link.c b/fs/cifs/link.c
index cd83c53..fc1e048 100644
--- a/fs/cifs/link.c
+++ b/fs/cifs/link.c
@@ -172,8 +172,9 @@
full_path = build_path_from_dentry(direntry);
if (full_path == NULL) {
+ rc = -ENOMEM;
FreeXid(xid);
- return -ENOMEM;
+ return rc;
}
cFYI(1, ("Full path: %s", full_path));
diff --git a/fs/cifs/netmisc.c b/fs/cifs/netmisc.c
index 32d6baa..bd6d689 100644
--- a/fs/cifs/netmisc.c
+++ b/fs/cifs/netmisc.c
@@ -133,10 +133,12 @@
{0, 0}
};
-/* Convert string containing dotted ip address to binary form */
-/* returns 0 if invalid address */
-
-int
+/*
+ * Convert a string containing text IPv4 or IPv6 address to binary form.
+ *
+ * Returns 0 on failure.
+ */
+static int
cifs_inet_pton(const int address_family, const char *cp, void *dst)
{
int ret = 0;
@@ -153,6 +155,52 @@
return ret;
}
+/*
+ * Try to convert a string to an IPv4 address and then attempt to convert
+ * it to an IPv6 address if that fails. Set the family field if either
+ * succeeds. If it's an IPv6 address and it has a '%' sign in it, try to
+ * treat the part following it as a numeric sin6_scope_id.
+ *
+ * Returns 0 on failure.
+ */
+int
+cifs_convert_address(char *src, void *dst)
+{
+ int rc;
+ char *pct, *endp;
+ struct sockaddr_in *s4 = (struct sockaddr_in *) dst;
+ struct sockaddr_in6 *s6 = (struct sockaddr_in6 *) dst;
+
+ /* IPv4 address */
+ if (cifs_inet_pton(AF_INET, src, &s4->sin_addr.s_addr)) {
+ s4->sin_family = AF_INET;
+ return 1;
+ }
+
+ /* temporarily terminate string */
+ pct = strchr(src, '%');
+ if (pct)
+ *pct = '\0';
+
+ rc = cifs_inet_pton(AF_INET6, src, &s6->sin6_addr.s6_addr);
+
+ /* repair temp termination (if any) and make pct point to scopeid */
+ if (pct)
+ *pct++ = '%';
+
+ if (!rc)
+ return rc;
+
+ s6->sin6_family = AF_INET6;
+ if (pct) {
+ s6->sin6_scope_id = (u32) simple_strtoul(pct, &endp, 0);
+ if (!*pct || *endp)
+ return 0;
+ }
+
+ return rc;
+}
+
/*****************************************************************************
convert a NT status code to a dos class/code
*****************************************************************************/
diff --git a/fs/cifs/sess.c b/fs/cifs/sess.c
index 897a052..7085a62 100644
--- a/fs/cifs/sess.c
+++ b/fs/cifs/sess.c
@@ -802,7 +802,7 @@
#endif /* CONFIG_CIFS_UPCALL */
} else {
#ifdef CONFIG_CIFS_EXPERIMENTAL
- if ((experimEnabled > 1) && (type == RawNTLMSSP)) {
+ if (type == RawNTLMSSP) {
if ((pSMB->req.hdr.Flags2 & SMBFLG2_UNICODE) == 0) {
cERROR(1, ("NTLMSSP requires Unicode support"));
rc = -ENOSYS;
diff --git a/fs/cifs/xattr.c b/fs/cifs/xattr.c
index e9527ee..a75afa3 100644
--- a/fs/cifs/xattr.c
+++ b/fs/cifs/xattr.c
@@ -64,8 +64,9 @@
full_path = build_path_from_dentry(direntry);
if (full_path == NULL) {
+ rc = -ENOMEM;
FreeXid(xid);
- return -ENOMEM;
+ return rc;
}
if (ea_name == NULL) {
cFYI(1, ("Null xattr names not supported"));
@@ -118,8 +119,9 @@
full_path = build_path_from_dentry(direntry);
if (full_path == NULL) {
+ rc = -ENOMEM;
FreeXid(xid);
- return -ENOMEM;
+ return rc;
}
/* return dos attributes as pseudo xattr */
/* return alt name if available as pseudo attr */
@@ -225,8 +227,9 @@
full_path = build_path_from_dentry(direntry);
if (full_path == NULL) {
+ rc = -ENOMEM;
FreeXid(xid);
- return -ENOMEM;
+ return rc;
}
/* return dos attributes as pseudo xattr */
/* return alt name if available as pseudo attr */
@@ -351,8 +354,9 @@
full_path = build_path_from_dentry(direntry);
if (full_path == NULL) {
+ rc = -ENOMEM;
FreeXid(xid);
- return -ENOMEM;
+ return rc;
}
/* return dos attributes as pseudo xattr */
/* return alt name if available as pseudo attr */
diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c
index c135202..626c748 100644
--- a/fs/compat_ioctl.c
+++ b/fs/compat_ioctl.c
@@ -31,6 +31,7 @@
#include <linux/skbuff.h>
#include <linux/netlink.h>
#include <linux/vt.h>
+#include <linux/falloc.h>
#include <linux/fs.h>
#include <linux/file.h>
#include <linux/ppp_defs.h>
@@ -1779,6 +1780,41 @@
return sys_ioctl(fd, cmd, (unsigned long)tn);
}
+/* on ia32 l_start is on a 32-bit boundary */
+#if defined(CONFIG_IA64) || defined(CONFIG_X86_64)
+struct space_resv_32 {
+ __s16 l_type;
+ __s16 l_whence;
+ __s64 l_start __attribute__((packed));
+ /* len == 0 means until end of file */
+ __s64 l_len __attribute__((packed));
+ __s32 l_sysid;
+ __u32 l_pid;
+ __s32 l_pad[4]; /* reserve area */
+};
+
+#define FS_IOC_RESVSP_32 _IOW ('X', 40, struct space_resv_32)
+#define FS_IOC_RESVSP64_32 _IOW ('X', 42, struct space_resv_32)
+
+/* just account for different alignment */
+static int compat_ioctl_preallocate(struct file *file, unsigned long arg)
+{
+ struct space_resv_32 __user *p32 = (void __user *)arg;
+ struct space_resv __user *p = compat_alloc_user_space(sizeof(*p));
+
+ if (copy_in_user(&p->l_type, &p32->l_type, sizeof(s16)) ||
+ copy_in_user(&p->l_whence, &p32->l_whence, sizeof(s16)) ||
+ copy_in_user(&p->l_start, &p32->l_start, sizeof(s64)) ||
+ copy_in_user(&p->l_len, &p32->l_len, sizeof(s64)) ||
+ copy_in_user(&p->l_sysid, &p32->l_sysid, sizeof(s32)) ||
+ copy_in_user(&p->l_pid, &p32->l_pid, sizeof(u32)) ||
+ copy_in_user(&p->l_pad, &p32->l_pad, 4*sizeof(u32)))
+ return -EFAULT;
+
+ return ioctl_preallocate(file, p);
+}
+#endif
+
typedef int (*ioctl_trans_handler_t)(unsigned int, unsigned int,
unsigned long, struct file *);
@@ -2756,6 +2792,18 @@
case FIOQSIZE:
break;
+#if defined(CONFIG_IA64) || defined(CONFIG_X86_64)
+ case FS_IOC_RESVSP_32:
+ case FS_IOC_RESVSP64_32:
+ error = compat_ioctl_preallocate(filp, arg);
+ goto out_fput;
+#else
+ case FS_IOC_RESVSP:
+ case FS_IOC_RESVSP64:
+ error = ioctl_preallocate(filp, (void __user *)arg);
+ goto out_fput;
+#endif
+
case FIBMAP:
case FIGETBSZ:
case FIONREAD:
diff --git a/fs/devpts/inode.c b/fs/devpts/inode.c
index 9b1d285..75efb02 100644
--- a/fs/devpts/inode.c
+++ b/fs/devpts/inode.c
@@ -423,7 +423,6 @@
}
static struct file_system_type devpts_fs_type = {
- .owner = THIS_MODULE,
.name = "devpts",
.get_sb = devpts_get_sb,
.kill_sb = devpts_kill_sb,
@@ -564,13 +563,4 @@
}
return err;
}
-
-static void __exit exit_devpts_fs(void)
-{
- unregister_filesystem(&devpts_fs_type);
- mntput(devpts_mnt);
-}
-
module_init(init_devpts_fs)
-module_exit(exit_devpts_fs)
-MODULE_LICENSE("GPL");
diff --git a/fs/ext2/acl.c b/fs/ext2/acl.c
index d46e38c..d636e12 100644
--- a/fs/ext2/acl.c
+++ b/fs/ext2/acl.c
@@ -125,37 +125,12 @@
return ERR_PTR(-EINVAL);
}
-static inline struct posix_acl *
-ext2_iget_acl(struct inode *inode, struct posix_acl **i_acl)
-{
- struct posix_acl *acl = EXT2_ACL_NOT_CACHED;
-
- spin_lock(&inode->i_lock);
- if (*i_acl != EXT2_ACL_NOT_CACHED)
- acl = posix_acl_dup(*i_acl);
- spin_unlock(&inode->i_lock);
-
- return acl;
-}
-
-static inline void
-ext2_iset_acl(struct inode *inode, struct posix_acl **i_acl,
- struct posix_acl *acl)
-{
- spin_lock(&inode->i_lock);
- if (*i_acl != EXT2_ACL_NOT_CACHED)
- posix_acl_release(*i_acl);
- *i_acl = posix_acl_dup(acl);
- spin_unlock(&inode->i_lock);
-}
-
/*
* inode->i_mutex: don't care
*/
static struct posix_acl *
ext2_get_acl(struct inode *inode, int type)
{
- struct ext2_inode_info *ei = EXT2_I(inode);
int name_index;
char *value = NULL;
struct posix_acl *acl;
@@ -164,23 +139,19 @@
if (!test_opt(inode->i_sb, POSIX_ACL))
return NULL;
- switch(type) {
- case ACL_TYPE_ACCESS:
- acl = ext2_iget_acl(inode, &ei->i_acl);
- if (acl != EXT2_ACL_NOT_CACHED)
- return acl;
- name_index = EXT2_XATTR_INDEX_POSIX_ACL_ACCESS;
- break;
+ acl = get_cached_acl(inode, type);
+ if (acl != ACL_NOT_CACHED)
+ return acl;
- case ACL_TYPE_DEFAULT:
- acl = ext2_iget_acl(inode, &ei->i_default_acl);
- if (acl != EXT2_ACL_NOT_CACHED)
- return acl;
- name_index = EXT2_XATTR_INDEX_POSIX_ACL_DEFAULT;
- break;
-
- default:
- return ERR_PTR(-EINVAL);
+ switch (type) {
+ case ACL_TYPE_ACCESS:
+ name_index = EXT2_XATTR_INDEX_POSIX_ACL_ACCESS;
+ break;
+ case ACL_TYPE_DEFAULT:
+ name_index = EXT2_XATTR_INDEX_POSIX_ACL_DEFAULT;
+ break;
+ default:
+ BUG();
}
retval = ext2_xattr_get(inode, name_index, "", NULL, 0);
if (retval > 0) {
@@ -197,17 +168,9 @@
acl = ERR_PTR(retval);
kfree(value);
- if (!IS_ERR(acl)) {
- switch(type) {
- case ACL_TYPE_ACCESS:
- ext2_iset_acl(inode, &ei->i_acl, acl);
- break;
+ if (!IS_ERR(acl))
+ set_cached_acl(inode, type, acl);
- case ACL_TYPE_DEFAULT:
- ext2_iset_acl(inode, &ei->i_default_acl, acl);
- break;
- }
- }
return acl;
}
@@ -217,7 +180,6 @@
static int
ext2_set_acl(struct inode *inode, int type, struct posix_acl *acl)
{
- struct ext2_inode_info *ei = EXT2_I(inode);
int name_index;
void *value = NULL;
size_t size = 0;
@@ -263,17 +225,8 @@
error = ext2_xattr_set(inode, name_index, "", value, size, 0);
kfree(value);
- if (!error) {
- switch(type) {
- case ACL_TYPE_ACCESS:
- ext2_iset_acl(inode, &ei->i_acl, acl);
- break;
-
- case ACL_TYPE_DEFAULT:
- ext2_iset_acl(inode, &ei->i_default_acl, acl);
- break;
- }
- }
+ if (!error)
+ set_cached_acl(inode, type, acl);
return error;
}
diff --git a/fs/ext2/acl.h b/fs/ext2/acl.h
index b42cf57..ecefe47 100644
--- a/fs/ext2/acl.h
+++ b/fs/ext2/acl.h
@@ -53,10 +53,6 @@
#ifdef CONFIG_EXT2_FS_POSIX_ACL
-/* Value for inode->u.ext2_i.i_acl and inode->u.ext2_i.i_default_acl
- if the ACL has not been cached */
-#define EXT2_ACL_NOT_CACHED ((void *)-1)
-
/* acl.c */
extern int ext2_permission (struct inode *, int);
extern int ext2_acl_chmod (struct inode *);
diff --git a/fs/ext2/ext2.h b/fs/ext2/ext2.h
index d988a71..9a8a8e2 100644
--- a/fs/ext2/ext2.h
+++ b/fs/ext2/ext2.h
@@ -47,10 +47,6 @@
*/
struct rw_semaphore xattr_sem;
#endif
-#ifdef CONFIG_EXT2_FS_POSIX_ACL
- struct posix_acl *i_acl;
- struct posix_acl *i_default_acl;
-#endif
rwlock_t i_meta_lock;
/*
diff --git a/fs/ext2/inode.c b/fs/ext2/inode.c
index 29ed682..e271303 100644
--- a/fs/ext2/inode.c
+++ b/fs/ext2/inode.c
@@ -1224,10 +1224,6 @@
return inode;
ei = EXT2_I(inode);
-#ifdef CONFIG_EXT2_FS_POSIX_ACL
- ei->i_acl = EXT2_ACL_NOT_CACHED;
- ei->i_default_acl = EXT2_ACL_NOT_CACHED;
-#endif
ei->i_block_alloc_info = NULL;
raw_inode = ext2_get_inode(inode->i_sb, ino, &bh);
diff --git a/fs/ext2/super.c b/fs/ext2/super.c
index 4589996..1a9ffee 100644
--- a/fs/ext2/super.c
+++ b/fs/ext2/super.c
@@ -152,10 +152,6 @@
ei = (struct ext2_inode_info *)kmem_cache_alloc(ext2_inode_cachep, GFP_KERNEL);
if (!ei)
return NULL;
-#ifdef CONFIG_EXT2_FS_POSIX_ACL
- ei->i_acl = EXT2_ACL_NOT_CACHED;
- ei->i_default_acl = EXT2_ACL_NOT_CACHED;
-#endif
ei->i_block_alloc_info = NULL;
ei->vfs_inode.i_version = 1;
return &ei->vfs_inode;
@@ -198,18 +194,6 @@
static void ext2_clear_inode(struct inode *inode)
{
struct ext2_block_alloc_info *rsv = EXT2_I(inode)->i_block_alloc_info;
-#ifdef CONFIG_EXT2_FS_POSIX_ACL
- struct ext2_inode_info *ei = EXT2_I(inode);
-
- if (ei->i_acl && ei->i_acl != EXT2_ACL_NOT_CACHED) {
- posix_acl_release(ei->i_acl);
- ei->i_acl = EXT2_ACL_NOT_CACHED;
- }
- if (ei->i_default_acl && ei->i_default_acl != EXT2_ACL_NOT_CACHED) {
- posix_acl_release(ei->i_default_acl);
- ei->i_default_acl = EXT2_ACL_NOT_CACHED;
- }
-#endif
ext2_discard_reservation(inode);
EXT2_I(inode)->i_block_alloc_info = NULL;
if (unlikely(rsv))
diff --git a/fs/ext3/acl.c b/fs/ext3/acl.c
index e0c7454..e167bae 100644
--- a/fs/ext3/acl.c
+++ b/fs/ext3/acl.c
@@ -126,33 +126,6 @@
return ERR_PTR(-EINVAL);
}
-static inline struct posix_acl *
-ext3_iget_acl(struct inode *inode, struct posix_acl **i_acl)
-{
- struct posix_acl *acl = ACCESS_ONCE(*i_acl);
-
- if (acl) {
- spin_lock(&inode->i_lock);
- acl = *i_acl;
- if (acl != EXT3_ACL_NOT_CACHED)
- acl = posix_acl_dup(acl);
- spin_unlock(&inode->i_lock);
- }
-
- return acl;
-}
-
-static inline void
-ext3_iset_acl(struct inode *inode, struct posix_acl **i_acl,
- struct posix_acl *acl)
-{
- spin_lock(&inode->i_lock);
- if (*i_acl != EXT3_ACL_NOT_CACHED)
- posix_acl_release(*i_acl);
- *i_acl = posix_acl_dup(acl);
- spin_unlock(&inode->i_lock);
-}
-
/*
* Inode operation get_posix_acl().
*
@@ -161,7 +134,6 @@
static struct posix_acl *
ext3_get_acl(struct inode *inode, int type)
{
- struct ext3_inode_info *ei = EXT3_I(inode);
int name_index;
char *value = NULL;
struct posix_acl *acl;
@@ -170,24 +142,21 @@
if (!test_opt(inode->i_sb, POSIX_ACL))
return NULL;
- switch(type) {
- case ACL_TYPE_ACCESS:
- acl = ext3_iget_acl(inode, &ei->i_acl);
- if (acl != EXT3_ACL_NOT_CACHED)
- return acl;
- name_index = EXT3_XATTR_INDEX_POSIX_ACL_ACCESS;
- break;
+ acl = get_cached_acl(inode, type);
+ if (acl != ACL_NOT_CACHED)
+ return acl;
- case ACL_TYPE_DEFAULT:
- acl = ext3_iget_acl(inode, &ei->i_default_acl);
- if (acl != EXT3_ACL_NOT_CACHED)
- return acl;
- name_index = EXT3_XATTR_INDEX_POSIX_ACL_DEFAULT;
- break;
-
- default:
- return ERR_PTR(-EINVAL);
+ switch (type) {
+ case ACL_TYPE_ACCESS:
+ name_index = EXT3_XATTR_INDEX_POSIX_ACL_ACCESS;
+ break;
+ case ACL_TYPE_DEFAULT:
+ name_index = EXT3_XATTR_INDEX_POSIX_ACL_DEFAULT;
+ break;
+ default:
+ BUG();
}
+
retval = ext3_xattr_get(inode, name_index, "", NULL, 0);
if (retval > 0) {
value = kmalloc(retval, GFP_NOFS);
@@ -203,17 +172,9 @@
acl = ERR_PTR(retval);
kfree(value);
- if (!IS_ERR(acl)) {
- switch(type) {
- case ACL_TYPE_ACCESS:
- ext3_iset_acl(inode, &ei->i_acl, acl);
- break;
+ if (!IS_ERR(acl))
+ set_cached_acl(inode, type, acl);
- case ACL_TYPE_DEFAULT:
- ext3_iset_acl(inode, &ei->i_default_acl, acl);
- break;
- }
- }
return acl;
}
@@ -226,7 +187,6 @@
ext3_set_acl(handle_t *handle, struct inode *inode, int type,
struct posix_acl *acl)
{
- struct ext3_inode_info *ei = EXT3_I(inode);
int name_index;
void *value = NULL;
size_t size = 0;
@@ -271,17 +231,10 @@
value, size, 0);
kfree(value);
- if (!error) {
- switch(type) {
- case ACL_TYPE_ACCESS:
- ext3_iset_acl(inode, &ei->i_acl, acl);
- break;
- case ACL_TYPE_DEFAULT:
- ext3_iset_acl(inode, &ei->i_default_acl, acl);
- break;
- }
- }
+ if (!error)
+ set_cached_acl(inode, type, acl);
+
return error;
}
diff --git a/fs/ext3/acl.h b/fs/ext3/acl.h
index 42da16b..07d15a3 100644
--- a/fs/ext3/acl.h
+++ b/fs/ext3/acl.h
@@ -53,10 +53,6 @@
#ifdef CONFIG_EXT3_FS_POSIX_ACL
-/* Value for inode->u.ext3_i.i_acl and inode->u.ext3_i.i_default_acl
- if the ACL has not been cached */
-#define EXT3_ACL_NOT_CACHED ((void *)-1)
-
/* acl.c */
extern int ext3_permission (struct inode *, int);
extern int ext3_acl_chmod (struct inode *);
diff --git a/fs/ext3/inode.c b/fs/ext3/inode.c
index 05dea81..5f51fed 100644
--- a/fs/ext3/inode.c
+++ b/fs/ext3/inode.c
@@ -2752,10 +2752,6 @@
return inode;
ei = EXT3_I(inode);
-#ifdef CONFIG_EXT3_FS_POSIX_ACL
- ei->i_acl = EXT3_ACL_NOT_CACHED;
- ei->i_default_acl = EXT3_ACL_NOT_CACHED;
-#endif
ei->i_block_alloc_info = NULL;
ret = __ext3_get_inode_loc(inode, &iloc, 0);
diff --git a/fs/ext3/super.c b/fs/ext3/super.c
index 601e881..524b349 100644
--- a/fs/ext3/super.c
+++ b/fs/ext3/super.c
@@ -464,10 +464,6 @@
ei = kmem_cache_alloc(ext3_inode_cachep, GFP_NOFS);
if (!ei)
return NULL;
-#ifdef CONFIG_EXT3_FS_POSIX_ACL
- ei->i_acl = EXT3_ACL_NOT_CACHED;
- ei->i_default_acl = EXT3_ACL_NOT_CACHED;
-#endif
ei->i_block_alloc_info = NULL;
ei->vfs_inode.i_version = 1;
return &ei->vfs_inode;
@@ -518,18 +514,6 @@
static void ext3_clear_inode(struct inode *inode)
{
struct ext3_block_alloc_info *rsv = EXT3_I(inode)->i_block_alloc_info;
-#ifdef CONFIG_EXT3_FS_POSIX_ACL
- if (EXT3_I(inode)->i_acl &&
- EXT3_I(inode)->i_acl != EXT3_ACL_NOT_CACHED) {
- posix_acl_release(EXT3_I(inode)->i_acl);
- EXT3_I(inode)->i_acl = EXT3_ACL_NOT_CACHED;
- }
- if (EXT3_I(inode)->i_default_acl &&
- EXT3_I(inode)->i_default_acl != EXT3_ACL_NOT_CACHED) {
- posix_acl_release(EXT3_I(inode)->i_default_acl);
- EXT3_I(inode)->i_default_acl = EXT3_ACL_NOT_CACHED;
- }
-#endif
ext3_discard_reservation(inode);
EXT3_I(inode)->i_block_alloc_info = NULL;
if (unlikely(rsv))
diff --git a/fs/ext4/acl.c b/fs/ext4/acl.c
index 605aeed..f6d8967 100644
--- a/fs/ext4/acl.c
+++ b/fs/ext4/acl.c
@@ -126,33 +126,6 @@
return ERR_PTR(-EINVAL);
}
-static inline struct posix_acl *
-ext4_iget_acl(struct inode *inode, struct posix_acl **i_acl)
-{
- struct posix_acl *acl = ACCESS_ONCE(*i_acl);
-
- if (acl) {
- spin_lock(&inode->i_lock);
- acl = *i_acl;
- if (acl != EXT4_ACL_NOT_CACHED)
- acl = posix_acl_dup(acl);
- spin_unlock(&inode->i_lock);
- }
-
- return acl;
-}
-
-static inline void
-ext4_iset_acl(struct inode *inode, struct posix_acl **i_acl,
- struct posix_acl *acl)
-{
- spin_lock(&inode->i_lock);
- if (*i_acl != EXT4_ACL_NOT_CACHED)
- posix_acl_release(*i_acl);
- *i_acl = posix_acl_dup(acl);
- spin_unlock(&inode->i_lock);
-}
-
/*
* Inode operation get_posix_acl().
*
@@ -161,7 +134,6 @@
static struct posix_acl *
ext4_get_acl(struct inode *inode, int type)
{
- struct ext4_inode_info *ei = EXT4_I(inode);
int name_index;
char *value = NULL;
struct posix_acl *acl;
@@ -170,23 +142,19 @@
if (!test_opt(inode->i_sb, POSIX_ACL))
return NULL;
+ acl = get_cached_acl(inode, type);
+ if (acl != ACL_NOT_CACHED)
+ return acl;
+
switch (type) {
case ACL_TYPE_ACCESS:
- acl = ext4_iget_acl(inode, &ei->i_acl);
- if (acl != EXT4_ACL_NOT_CACHED)
- return acl;
name_index = EXT4_XATTR_INDEX_POSIX_ACL_ACCESS;
break;
-
case ACL_TYPE_DEFAULT:
- acl = ext4_iget_acl(inode, &ei->i_default_acl);
- if (acl != EXT4_ACL_NOT_CACHED)
- return acl;
name_index = EXT4_XATTR_INDEX_POSIX_ACL_DEFAULT;
break;
-
default:
- return ERR_PTR(-EINVAL);
+ BUG();
}
retval = ext4_xattr_get(inode, name_index, "", NULL, 0);
if (retval > 0) {
@@ -203,17 +171,9 @@
acl = ERR_PTR(retval);
kfree(value);
- if (!IS_ERR(acl)) {
- switch (type) {
- case ACL_TYPE_ACCESS:
- ext4_iset_acl(inode, &ei->i_acl, acl);
- break;
+ if (!IS_ERR(acl))
+ set_cached_acl(inode, type, acl);
- case ACL_TYPE_DEFAULT:
- ext4_iset_acl(inode, &ei->i_default_acl, acl);
- break;
- }
- }
return acl;
}
@@ -226,7 +186,6 @@
ext4_set_acl(handle_t *handle, struct inode *inode, int type,
struct posix_acl *acl)
{
- struct ext4_inode_info *ei = EXT4_I(inode);
int name_index;
void *value = NULL;
size_t size = 0;
@@ -271,17 +230,9 @@
value, size, 0);
kfree(value);
- if (!error) {
- switch (type) {
- case ACL_TYPE_ACCESS:
- ext4_iset_acl(inode, &ei->i_acl, acl);
- break;
+ if (!error)
+ set_cached_acl(inode, type, acl);
- case ACL_TYPE_DEFAULT:
- ext4_iset_acl(inode, &ei->i_default_acl, acl);
- break;
- }
- }
return error;
}
diff --git a/fs/ext4/acl.h b/fs/ext4/acl.h
index cb45257..949789d 100644
--- a/fs/ext4/acl.h
+++ b/fs/ext4/acl.h
@@ -53,10 +53,6 @@
#ifdef CONFIG_EXT4_FS_POSIX_ACL
-/* Value for inode->u.ext4_i.i_acl and inode->u.ext4_i.i_default_acl
- if the ACL has not been cached */
-#define EXT4_ACL_NOT_CACHED ((void *)-1)
-
/* acl.c */
extern int ext4_permission(struct inode *, int);
extern int ext4_acl_chmod(struct inode *);
diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h
index 17b99986..0ddf7e5 100644
--- a/fs/ext4/ext4.h
+++ b/fs/ext4/ext4.h
@@ -595,10 +595,6 @@
*/
struct rw_semaphore xattr_sem;
#endif
-#ifdef CONFIG_EXT4_FS_POSIX_ACL
- struct posix_acl *i_acl;
- struct posix_acl *i_default_acl;
-#endif
struct list_head i_orphan; /* unlinked but open inodes */
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 7c17ae2..60a26f3 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -4453,10 +4453,6 @@
return inode;
ei = EXT4_I(inode);
-#ifdef CONFIG_EXT4_FS_POSIX_ACL
- ei->i_acl = EXT4_ACL_NOT_CACHED;
- ei->i_default_acl = EXT4_ACL_NOT_CACHED;
-#endif
ret = __ext4_get_inode_loc(inode, &iloc, 0);
if (ret < 0)
diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index 8bb9e2d..8f4f079 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -666,10 +666,6 @@
if (!ei)
return NULL;
-#ifdef CONFIG_EXT4_FS_POSIX_ACL
- ei->i_acl = EXT4_ACL_NOT_CACHED;
- ei->i_default_acl = EXT4_ACL_NOT_CACHED;
-#endif
ei->vfs_inode.i_version = 1;
ei->vfs_inode.i_data.writeback_index = 0;
memset(&ei->i_cached_extent, 0, sizeof(struct ext4_ext_cache));
@@ -735,18 +731,6 @@
static void ext4_clear_inode(struct inode *inode)
{
-#ifdef CONFIG_EXT4_FS_POSIX_ACL
- if (EXT4_I(inode)->i_acl &&
- EXT4_I(inode)->i_acl != EXT4_ACL_NOT_CACHED) {
- posix_acl_release(EXT4_I(inode)->i_acl);
- EXT4_I(inode)->i_acl = EXT4_ACL_NOT_CACHED;
- }
- if (EXT4_I(inode)->i_default_acl &&
- EXT4_I(inode)->i_default_acl != EXT4_ACL_NOT_CACHED) {
- posix_acl_release(EXT4_I(inode)->i_default_acl);
- EXT4_I(inode)->i_default_acl = EXT4_ACL_NOT_CACHED;
- }
-#endif
ext4_discard_preallocations(inode);
if (EXT4_JOURNAL(inode))
jbd2_journal_release_jbd_inode(EXT4_SB(inode->i_sb)->s_journal,
diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c
index caf0491..c54226b 100644
--- a/fs/fs-writeback.c
+++ b/fs/fs-writeback.c
@@ -278,7 +278,26 @@
EXPORT_SYMBOL(sb_has_dirty_inodes);
/*
- * Write a single inode's dirty pages and inode data out to disk.
+ * Wait for writeback on an inode to complete.
+ */
+static void inode_wait_for_writeback(struct inode *inode)
+{
+ DEFINE_WAIT_BIT(wq, &inode->i_state, __I_SYNC);
+ wait_queue_head_t *wqh;
+
+ wqh = bit_waitqueue(&inode->i_state, __I_SYNC);
+ do {
+ spin_unlock(&inode_lock);
+ __wait_on_bit(wqh, &wq, inode_wait, TASK_UNINTERRUPTIBLE);
+ spin_lock(&inode_lock);
+ } while (inode->i_state & I_SYNC);
+}
+
+/*
+ * Write out an inode's dirty pages. Called under inode_lock. Either the
+ * caller has ref on the inode (either via __iget or via syscall against an fd)
+ * or the inode has I_WILL_FREE set (via generic_forget_inode)
+ *
* If `wait' is set, wait on the writeout.
*
* The whole writeout design is quite complex and fragile. We want to avoid
@@ -288,13 +307,38 @@
* Called under inode_lock.
*/
static int
-__sync_single_inode(struct inode *inode, struct writeback_control *wbc)
+writeback_single_inode(struct inode *inode, struct writeback_control *wbc)
{
- unsigned dirty;
struct address_space *mapping = inode->i_mapping;
int wait = wbc->sync_mode == WB_SYNC_ALL;
+ unsigned dirty;
int ret;
+ if (!atomic_read(&inode->i_count))
+ WARN_ON(!(inode->i_state & (I_WILL_FREE|I_FREEING)));
+ else
+ WARN_ON(inode->i_state & I_WILL_FREE);
+
+ if (inode->i_state & I_SYNC) {
+ /*
+ * If this inode is locked for writeback and we are not doing
+ * writeback-for-data-integrity, move it to s_more_io so that
+ * writeback can proceed with the other inodes on s_io.
+ *
+ * We'll have another go at writing back this inode when we
+ * completed a full scan of s_io.
+ */
+ if (!wait) {
+ requeue_io(inode);
+ return 0;
+ }
+
+ /*
+ * It's a data-integrity sync. We must wait.
+ */
+ inode_wait_for_writeback(inode);
+ }
+
BUG_ON(inode->i_state & I_SYNC);
/* Set I_SYNC, reset I_DIRTY */
@@ -390,50 +434,6 @@
}
/*
- * Write out an inode's dirty pages. Called under inode_lock. Either the
- * caller has ref on the inode (either via __iget or via syscall against an fd)
- * or the inode has I_WILL_FREE set (via generic_forget_inode)
- */
-static int
-__writeback_single_inode(struct inode *inode, struct writeback_control *wbc)
-{
- wait_queue_head_t *wqh;
-
- if (!atomic_read(&inode->i_count))
- WARN_ON(!(inode->i_state & (I_WILL_FREE|I_FREEING)));
- else
- WARN_ON(inode->i_state & I_WILL_FREE);
-
- if ((wbc->sync_mode != WB_SYNC_ALL) && (inode->i_state & I_SYNC)) {
- /*
- * We're skipping this inode because it's locked, and we're not
- * doing writeback-for-data-integrity. Move it to s_more_io so
- * that writeback can proceed with the other inodes on s_io.
- * We'll have another go at writing back this inode when we
- * completed a full scan of s_io.
- */
- requeue_io(inode);
- return 0;
- }
-
- /*
- * It's a data-integrity sync. We must wait.
- */
- if (inode->i_state & I_SYNC) {
- DEFINE_WAIT_BIT(wq, &inode->i_state, __I_SYNC);
-
- wqh = bit_waitqueue(&inode->i_state, __I_SYNC);
- do {
- spin_unlock(&inode_lock);
- __wait_on_bit(wqh, &wq, inode_wait,
- TASK_UNINTERRUPTIBLE);
- spin_lock(&inode_lock);
- } while (inode->i_state & I_SYNC);
- }
- return __sync_single_inode(inode, wbc);
-}
-
-/*
* Write out a superblock's list of dirty inodes. A wait will be performed
* upon no inodes, all inodes or the final one, depending upon sync_mode.
*
@@ -526,7 +526,7 @@
BUG_ON(inode->i_state & (I_FREEING | I_CLEAR));
__iget(inode);
pages_skipped = wbc->pages_skipped;
- __writeback_single_inode(inode, wbc);
+ writeback_single_inode(inode, wbc);
if (current_is_pdflush())
writeback_release(bdi);
if (wbc->pages_skipped != pages_skipped) {
@@ -708,7 +708,7 @@
might_sleep();
spin_lock(&inode_lock);
- ret = __writeback_single_inode(inode, &wbc);
+ ret = writeback_single_inode(inode, &wbc);
spin_unlock(&inode_lock);
if (sync)
inode_sync_wait(inode);
@@ -732,7 +732,7 @@
int ret;
spin_lock(&inode_lock);
- ret = __writeback_single_inode(inode, wbc);
+ ret = writeback_single_inode(inode, wbc);
spin_unlock(&inode_lock);
return ret;
}
diff --git a/fs/inode.c b/fs/inode.c
index f643be5..901bad1 100644
--- a/fs/inode.c
+++ b/fs/inode.c
@@ -25,6 +25,7 @@
#include <linux/fsnotify.h>
#include <linux/mount.h>
#include <linux/async.h>
+#include <linux/posix_acl.h>
/*
* This is needed for the following functions:
@@ -189,6 +190,9 @@
}
inode->i_private = NULL;
inode->i_mapping = mapping;
+#ifdef CONFIG_FS_POSIX_ACL
+ inode->i_acl = inode->i_default_acl = ACL_NOT_CACHED;
+#endif
#ifdef CONFIG_FSNOTIFY
inode->i_fsnotify_mask = 0;
@@ -227,6 +231,12 @@
ima_inode_free(inode);
security_inode_free(inode);
fsnotify_inode_delete(inode);
+#ifdef CONFIG_FS_POSIX_ACL
+ if (inode->i_acl && inode->i_acl != ACL_NOT_CACHED)
+ posix_acl_release(inode->i_acl);
+ if (inode->i_default_acl && inode->i_default_acl != ACL_NOT_CACHED)
+ posix_acl_release(inode->i_default_acl);
+#endif
if (inode->i_sb->s_op->destroy_inode)
inode->i_sb->s_op->destroy_inode(inode);
else
@@ -665,12 +675,17 @@
if (inode->i_mode & S_IFDIR) {
struct file_system_type *type = inode->i_sb->s_type;
- /*
- * ensure nobody is actually holding i_mutex
- */
- mutex_destroy(&inode->i_mutex);
- mutex_init(&inode->i_mutex);
- lockdep_set_class(&inode->i_mutex, &type->i_mutex_dir_key);
+ /* Set new key only if filesystem hasn't already changed it */
+ if (!lockdep_match_class(&inode->i_mutex,
+ &type->i_mutex_key)) {
+ /*
+ * ensure nobody is actually holding i_mutex
+ */
+ mutex_destroy(&inode->i_mutex);
+ mutex_init(&inode->i_mutex);
+ lockdep_set_class(&inode->i_mutex,
+ &type->i_mutex_dir_key);
+ }
}
#endif
/*
diff --git a/fs/ioctl.c b/fs/ioctl.c
index 001f8d3..5612880 100644
--- a/fs/ioctl.c
+++ b/fs/ioctl.c
@@ -15,6 +15,7 @@
#include <linux/uaccess.h>
#include <linux/writeback.h>
#include <linux/buffer_head.h>
+#include <linux/falloc.h>
#include <asm/ioctls.h>
@@ -403,6 +404,37 @@
#endif /* CONFIG_BLOCK */
+/*
+ * This provides compatibility with legacy XFS pre-allocation ioctls
+ * which predate the fallocate syscall.
+ *
+ * Only the l_start, l_len and l_whence fields of the 'struct space_resv'
+ * are used here, rest are ignored.
+ */
+int ioctl_preallocate(struct file *filp, void __user *argp)
+{
+ struct inode *inode = filp->f_path.dentry->d_inode;
+ struct space_resv sr;
+
+ if (copy_from_user(&sr, argp, sizeof(sr)))
+ return -EFAULT;
+
+ switch (sr.l_whence) {
+ case SEEK_SET:
+ break;
+ case SEEK_CUR:
+ sr.l_start += filp->f_pos;
+ break;
+ case SEEK_END:
+ sr.l_start += i_size_read(inode);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return do_fallocate(filp, FALLOC_FL_KEEP_SIZE, sr.l_start, sr.l_len);
+}
+
static int file_ioctl(struct file *filp, unsigned int cmd,
unsigned long arg)
{
@@ -414,6 +446,9 @@
return ioctl_fibmap(filp, p);
case FIONREAD:
return put_user(i_size_read(inode) - filp->f_pos, p);
+ case FS_IOC_RESVSP:
+ case FS_IOC_RESVSP64:
+ return ioctl_preallocate(filp, p);
}
return vfs_ioctl(filp, cmd, arg);
diff --git a/fs/jffs2/acl.c b/fs/jffs2/acl.c
index 043740d..8fcb62392 100644
--- a/fs/jffs2/acl.c
+++ b/fs/jffs2/acl.c
@@ -156,48 +156,25 @@
return ERR_PTR(-EINVAL);
}
-static struct posix_acl *jffs2_iget_acl(struct inode *inode, struct posix_acl **i_acl)
-{
- struct posix_acl *acl = JFFS2_ACL_NOT_CACHED;
-
- spin_lock(&inode->i_lock);
- if (*i_acl != JFFS2_ACL_NOT_CACHED)
- acl = posix_acl_dup(*i_acl);
- spin_unlock(&inode->i_lock);
- return acl;
-}
-
-static void jffs2_iset_acl(struct inode *inode, struct posix_acl **i_acl, struct posix_acl *acl)
-{
- spin_lock(&inode->i_lock);
- if (*i_acl != JFFS2_ACL_NOT_CACHED)
- posix_acl_release(*i_acl);
- *i_acl = posix_acl_dup(acl);
- spin_unlock(&inode->i_lock);
-}
-
static struct posix_acl *jffs2_get_acl(struct inode *inode, int type)
{
- struct jffs2_inode_info *f = JFFS2_INODE_INFO(inode);
struct posix_acl *acl;
char *value = NULL;
int rc, xprefix;
+ acl = get_cached_acl(inode, type);
+ if (acl != ACL_NOT_CACHED)
+ return acl;
+
switch (type) {
case ACL_TYPE_ACCESS:
- acl = jffs2_iget_acl(inode, &f->i_acl_access);
- if (acl != JFFS2_ACL_NOT_CACHED)
- return acl;
xprefix = JFFS2_XPREFIX_ACL_ACCESS;
break;
case ACL_TYPE_DEFAULT:
- acl = jffs2_iget_acl(inode, &f->i_acl_default);
- if (acl != JFFS2_ACL_NOT_CACHED)
- return acl;
xprefix = JFFS2_XPREFIX_ACL_DEFAULT;
break;
default:
- return ERR_PTR(-EINVAL);
+ BUG();
}
rc = do_jffs2_getxattr(inode, xprefix, "", NULL, 0);
if (rc > 0) {
@@ -215,16 +192,8 @@
}
if (value)
kfree(value);
- if (!IS_ERR(acl)) {
- switch (type) {
- case ACL_TYPE_ACCESS:
- jffs2_iset_acl(inode, &f->i_acl_access, acl);
- break;
- case ACL_TYPE_DEFAULT:
- jffs2_iset_acl(inode, &f->i_acl_default, acl);
- break;
- }
- }
+ if (!IS_ERR(acl))
+ set_cached_acl(inode, type, acl);
return acl;
}
@@ -249,7 +218,6 @@
static int jffs2_set_acl(struct inode *inode, int type, struct posix_acl *acl)
{
- struct jffs2_inode_info *f = JFFS2_INODE_INFO(inode);
int rc, xprefix;
if (S_ISLNK(inode->i_mode))
@@ -285,16 +253,8 @@
return -EINVAL;
}
rc = __jffs2_set_acl(inode, xprefix, acl);
- if (!rc) {
- switch(type) {
- case ACL_TYPE_ACCESS:
- jffs2_iset_acl(inode, &f->i_acl_access, acl);
- break;
- case ACL_TYPE_DEFAULT:
- jffs2_iset_acl(inode, &f->i_acl_default, acl);
- break;
- }
- }
+ if (!rc)
+ set_cached_acl(inode, type, acl);
return rc;
}
@@ -321,12 +281,10 @@
int jffs2_init_acl_pre(struct inode *dir_i, struct inode *inode, int *i_mode)
{
- struct jffs2_inode_info *f = JFFS2_INODE_INFO(inode);
struct posix_acl *acl, *clone;
int rc;
- f->i_acl_default = NULL;
- f->i_acl_access = NULL;
+ cache_no_acl(inode);
if (S_ISLNK(*i_mode))
return 0; /* Symlink always has no-ACL */
@@ -339,7 +297,7 @@
*i_mode &= ~current_umask();
} else {
if (S_ISDIR(*i_mode))
- jffs2_iset_acl(inode, &f->i_acl_default, acl);
+ set_cached_acl(inode, ACL_TYPE_DEFAULT, acl);
clone = posix_acl_clone(acl, GFP_KERNEL);
if (!clone)
@@ -350,7 +308,7 @@
return rc;
}
if (rc > 0)
- jffs2_iset_acl(inode, &f->i_acl_access, clone);
+ set_cached_acl(inode, ACL_TYPE_ACCESS, clone);
posix_acl_release(clone);
}
@@ -359,17 +317,16 @@
int jffs2_init_acl_post(struct inode *inode)
{
- struct jffs2_inode_info *f = JFFS2_INODE_INFO(inode);
int rc;
- if (f->i_acl_default) {
- rc = __jffs2_set_acl(inode, JFFS2_XPREFIX_ACL_DEFAULT, f->i_acl_default);
+ if (inode->i_default_acl) {
+ rc = __jffs2_set_acl(inode, JFFS2_XPREFIX_ACL_DEFAULT, inode->i_default_acl);
if (rc)
return rc;
}
- if (f->i_acl_access) {
- rc = __jffs2_set_acl(inode, JFFS2_XPREFIX_ACL_ACCESS, f->i_acl_access);
+ if (inode->i_acl) {
+ rc = __jffs2_set_acl(inode, JFFS2_XPREFIX_ACL_ACCESS, inode->i_acl);
if (rc)
return rc;
}
@@ -377,18 +334,6 @@
return 0;
}
-void jffs2_clear_acl(struct jffs2_inode_info *f)
-{
- if (f->i_acl_access && f->i_acl_access != JFFS2_ACL_NOT_CACHED) {
- posix_acl_release(f->i_acl_access);
- f->i_acl_access = JFFS2_ACL_NOT_CACHED;
- }
- if (f->i_acl_default && f->i_acl_default != JFFS2_ACL_NOT_CACHED) {
- posix_acl_release(f->i_acl_default);
- f->i_acl_default = JFFS2_ACL_NOT_CACHED;
- }
-}
-
int jffs2_acl_chmod(struct inode *inode)
{
struct posix_acl *acl, *clone;
diff --git a/fs/jffs2/acl.h b/fs/jffs2/acl.h
index 8ca058a..fc929f2 100644
--- a/fs/jffs2/acl.h
+++ b/fs/jffs2/acl.h
@@ -26,13 +26,10 @@
#ifdef CONFIG_JFFS2_FS_POSIX_ACL
-#define JFFS2_ACL_NOT_CACHED ((void *)-1)
-
extern int jffs2_permission(struct inode *, int);
extern int jffs2_acl_chmod(struct inode *);
extern int jffs2_init_acl_pre(struct inode *, struct inode *, int *);
extern int jffs2_init_acl_post(struct inode *);
-extern void jffs2_clear_acl(struct jffs2_inode_info *);
extern struct xattr_handler jffs2_acl_access_xattr_handler;
extern struct xattr_handler jffs2_acl_default_xattr_handler;
@@ -43,6 +40,5 @@
#define jffs2_acl_chmod(inode) (0)
#define jffs2_init_acl_pre(dir_i,inode,mode) (0)
#define jffs2_init_acl_post(inode) (0)
-#define jffs2_clear_acl(f)
#endif /* CONFIG_JFFS2_FS_POSIX_ACL */
diff --git a/fs/jffs2/jffs2_fs_i.h b/fs/jffs2/jffs2_fs_i.h
index 4c41db9..c6923da 100644
--- a/fs/jffs2/jffs2_fs_i.h
+++ b/fs/jffs2/jffs2_fs_i.h
@@ -50,10 +50,6 @@
uint16_t flags;
uint8_t usercompr;
struct inode vfs_inode;
-#ifdef CONFIG_JFFS2_FS_POSIX_ACL
- struct posix_acl *i_acl_access;
- struct posix_acl *i_acl_default;
-#endif
};
#endif /* _JFFS2_FS_I */
diff --git a/fs/jffs2/os-linux.h b/fs/jffs2/os-linux.h
index 2228380c..a7f03b7 100644
--- a/fs/jffs2/os-linux.h
+++ b/fs/jffs2/os-linux.h
@@ -56,10 +56,6 @@
f->target = NULL;
f->flags = 0;
f->usercompr = 0;
-#ifdef CONFIG_JFFS2_FS_POSIX_ACL
- f->i_acl_access = JFFS2_ACL_NOT_CACHED;
- f->i_acl_default = JFFS2_ACL_NOT_CACHED;
-#endif
}
diff --git a/fs/jffs2/readinode.c b/fs/jffs2/readinode.c
index 1fc1e92..1a80301 100644
--- a/fs/jffs2/readinode.c
+++ b/fs/jffs2/readinode.c
@@ -1424,7 +1424,6 @@
struct jffs2_full_dirent *fd, *fds;
int deleted;
- jffs2_clear_acl(f);
jffs2_xattr_delete_inode(c, f->inocache);
mutex_lock(&f->sem);
deleted = f->inocache && !f->inocache->pino_nlink;
diff --git a/fs/jfs/acl.c b/fs/jfs/acl.c
index 06ca1b8..91fa3ad 100644
--- a/fs/jfs/acl.c
+++ b/fs/jfs/acl.c
@@ -31,27 +31,24 @@
{
struct posix_acl *acl;
char *ea_name;
- struct jfs_inode_info *ji = JFS_IP(inode);
- struct posix_acl **p_acl;
int size;
char *value = NULL;
+ acl = get_cached_acl(inode, type);
+ if (acl != ACL_NOT_CACHED)
+ return acl;
+
switch(type) {
case ACL_TYPE_ACCESS:
ea_name = POSIX_ACL_XATTR_ACCESS;
- p_acl = &ji->i_acl;
break;
case ACL_TYPE_DEFAULT:
ea_name = POSIX_ACL_XATTR_DEFAULT;
- p_acl = &ji->i_default_acl;
break;
default:
return ERR_PTR(-EINVAL);
}
- if (*p_acl != JFS_ACL_NOT_CACHED)
- return posix_acl_dup(*p_acl);
-
size = __jfs_getxattr(inode, ea_name, NULL, 0);
if (size > 0) {
@@ -62,17 +59,18 @@
}
if (size < 0) {
- if (size == -ENODATA) {
- *p_acl = NULL;
+ if (size == -ENODATA)
acl = NULL;
- } else
+ else
acl = ERR_PTR(size);
} else {
acl = posix_acl_from_xattr(value, size);
- if (!IS_ERR(acl))
- *p_acl = posix_acl_dup(acl);
}
kfree(value);
+ if (!IS_ERR(acl)) {
+ set_cached_acl(inode, type, acl);
+ posix_acl_release(acl);
+ }
return acl;
}
@@ -80,8 +78,6 @@
struct posix_acl *acl)
{
char *ea_name;
- struct jfs_inode_info *ji = JFS_IP(inode);
- struct posix_acl **p_acl;
int rc;
int size = 0;
char *value = NULL;
@@ -92,11 +88,9 @@
switch(type) {
case ACL_TYPE_ACCESS:
ea_name = POSIX_ACL_XATTR_ACCESS;
- p_acl = &ji->i_acl;
break;
case ACL_TYPE_DEFAULT:
ea_name = POSIX_ACL_XATTR_DEFAULT;
- p_acl = &ji->i_default_acl;
if (!S_ISDIR(inode->i_mode))
return acl ? -EACCES : 0;
break;
@@ -116,27 +110,24 @@
out:
kfree(value);
- if (!rc) {
- if (*p_acl && (*p_acl != JFS_ACL_NOT_CACHED))
- posix_acl_release(*p_acl);
- *p_acl = posix_acl_dup(acl);
- }
+ if (!rc)
+ set_cached_acl(inode, type, acl);
+
return rc;
}
static int jfs_check_acl(struct inode *inode, int mask)
{
- struct jfs_inode_info *ji = JFS_IP(inode);
+ struct posix_acl *acl = jfs_get_acl(inode, ACL_TYPE_ACCESS);
- if (ji->i_acl == JFS_ACL_NOT_CACHED) {
- struct posix_acl *acl = jfs_get_acl(inode, ACL_TYPE_ACCESS);
- if (IS_ERR(acl))
- return PTR_ERR(acl);
+ if (IS_ERR(acl))
+ return PTR_ERR(acl);
+ if (acl) {
+ int error = posix_acl_permission(inode, acl, mask);
posix_acl_release(acl);
+ return error;
}
- if (ji->i_acl)
- return posix_acl_permission(inode, ji->i_acl, mask);
return -EAGAIN;
}
diff --git a/fs/jfs/jfs_incore.h b/fs/jfs/jfs_incore.h
index 439901d..1439f11 100644
--- a/fs/jfs/jfs_incore.h
+++ b/fs/jfs/jfs_incore.h
@@ -74,10 +74,6 @@
/* xattr_sem allows us to access the xattrs without taking i_mutex */
struct rw_semaphore xattr_sem;
lid_t xtlid; /* lid of xtree lock on directory */
-#ifdef CONFIG_JFS_POSIX_ACL
- struct posix_acl *i_acl;
- struct posix_acl *i_default_acl;
-#endif
union {
struct {
xtpage_t _xtroot; /* 288: xtree root */
@@ -107,8 +103,6 @@
#define i_inline u.link._inline
#define i_inline_ea u.link._inline_ea
-#define JFS_ACL_NOT_CACHED ((void *)-1)
-
#define IREAD_LOCK(ip, subclass) \
down_read_nested(&JFS_IP(ip)->rdwrlock, subclass)
#define IREAD_UNLOCK(ip) up_read(&JFS_IP(ip)->rdwrlock)
diff --git a/fs/jfs/super.c b/fs/jfs/super.c
index 09b1b6e..37e6dcd 100644
--- a/fs/jfs/super.c
+++ b/fs/jfs/super.c
@@ -128,18 +128,6 @@
ji->active_ag = -1;
}
spin_unlock_irq(&ji->ag_lock);
-
-#ifdef CONFIG_JFS_POSIX_ACL
- if (ji->i_acl != JFS_ACL_NOT_CACHED) {
- posix_acl_release(ji->i_acl);
- ji->i_acl = JFS_ACL_NOT_CACHED;
- }
- if (ji->i_default_acl != JFS_ACL_NOT_CACHED) {
- posix_acl_release(ji->i_default_acl);
- ji->i_default_acl = JFS_ACL_NOT_CACHED;
- }
-#endif
-
kmem_cache_free(jfs_inode_cachep, ji);
}
@@ -798,10 +786,6 @@
init_rwsem(&jfs_ip->xattr_sem);
spin_lock_init(&jfs_ip->ag_lock);
jfs_ip->active_ag = -1;
-#ifdef CONFIG_JFS_POSIX_ACL
- jfs_ip->i_acl = JFS_ACL_NOT_CACHED;
- jfs_ip->i_default_acl = JFS_ACL_NOT_CACHED;
-#endif
inode_init_once(&jfs_ip->vfs_inode);
}
diff --git a/fs/jfs/xattr.c b/fs/jfs/xattr.c
index 61dfa81..fad3645 100644
--- a/fs/jfs/xattr.c
+++ b/fs/jfs/xattr.c
@@ -727,10 +727,7 @@
/*
* We're changing the ACL. Get rid of the cached one
*/
- acl =JFS_IP(inode)->i_acl;
- if (acl != JFS_ACL_NOT_CACHED)
- posix_acl_release(acl);
- JFS_IP(inode)->i_acl = JFS_ACL_NOT_CACHED;
+ forget_cached_acl(inode, ACL_TYPE_ACCESS);
return 0;
} else if (strcmp(name, POSIX_ACL_XATTR_DEFAULT) == 0) {
@@ -746,10 +743,7 @@
/*
* We're changing the default ACL. Get rid of the cached one
*/
- acl =JFS_IP(inode)->i_default_acl;
- if (acl && (acl != JFS_ACL_NOT_CACHED))
- posix_acl_release(acl);
- JFS_IP(inode)->i_default_acl = JFS_ACL_NOT_CACHED;
+ forget_cached_acl(inode, ACL_TYPE_DEFAULT);
return 0;
}
diff --git a/fs/namei.c b/fs/namei.c
index 527119a..5b961eb 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -1698,8 +1698,11 @@
if (error)
return ERR_PTR(error);
error = path_walk(pathname, &nd);
- if (error)
+ if (error) {
+ if (nd.root.mnt)
+ path_put(&nd.root);
return ERR_PTR(error);
+ }
if (unlikely(!audit_dummy_context()))
audit_inode(pathname, nd.path.dentry);
@@ -1759,6 +1762,8 @@
}
filp = nameidata_to_filp(&nd, open_flag);
mnt_drop_write(nd.path.mnt);
+ if (nd.root.mnt)
+ path_put(&nd.root);
return filp;
}
@@ -1819,6 +1824,8 @@
*/
if (will_write)
mnt_drop_write(nd.path.mnt);
+ if (nd.root.mnt)
+ path_put(&nd.root);
return filp;
exit_mutex_unlock:
@@ -1859,6 +1866,8 @@
* with "intent.open".
*/
release_open_intent(&nd);
+ if (nd.root.mnt)
+ path_put(&nd.root);
return ERR_PTR(error);
}
nd.flags &= ~LOOKUP_PARENT;
diff --git a/fs/namespace.c b/fs/namespace.c
index a7bea8c..3dc283f 100644
--- a/fs/namespace.c
+++ b/fs/namespace.c
@@ -42,6 +42,8 @@
static int event;
static DEFINE_IDA(mnt_id_ida);
static DEFINE_IDA(mnt_group_ida);
+static int mnt_id_start = 0;
+static int mnt_group_start = 1;
static struct list_head *mount_hashtable __read_mostly;
static struct kmem_cache *mnt_cache __read_mostly;
@@ -69,7 +71,9 @@
retry:
ida_pre_get(&mnt_id_ida, GFP_KERNEL);
spin_lock(&vfsmount_lock);
- res = ida_get_new(&mnt_id_ida, &mnt->mnt_id);
+ res = ida_get_new_above(&mnt_id_ida, mnt_id_start, &mnt->mnt_id);
+ if (!res)
+ mnt_id_start = mnt->mnt_id + 1;
spin_unlock(&vfsmount_lock);
if (res == -EAGAIN)
goto retry;
@@ -79,8 +83,11 @@
static void mnt_free_id(struct vfsmount *mnt)
{
+ int id = mnt->mnt_id;
spin_lock(&vfsmount_lock);
- ida_remove(&mnt_id_ida, mnt->mnt_id);
+ ida_remove(&mnt_id_ida, id);
+ if (mnt_id_start > id)
+ mnt_id_start = id;
spin_unlock(&vfsmount_lock);
}
@@ -91,10 +98,18 @@
*/
static int mnt_alloc_group_id(struct vfsmount *mnt)
{
+ int res;
+
if (!ida_pre_get(&mnt_group_ida, GFP_KERNEL))
return -ENOMEM;
- return ida_get_new_above(&mnt_group_ida, 1, &mnt->mnt_group_id);
+ res = ida_get_new_above(&mnt_group_ida,
+ mnt_group_start,
+ &mnt->mnt_group_id);
+ if (!res)
+ mnt_group_start = mnt->mnt_group_id + 1;
+
+ return res;
}
/*
@@ -102,7 +117,10 @@
*/
void mnt_release_group_id(struct vfsmount *mnt)
{
- ida_remove(&mnt_group_ida, mnt->mnt_group_id);
+ int id = mnt->mnt_group_id;
+ ida_remove(&mnt_group_ida, id);
+ if (mnt_group_start > id)
+ mnt_group_start = id;
mnt->mnt_group_id = 0;
}
@@ -2222,16 +2240,9 @@
mnt = do_kern_mount("rootfs", 0, "rootfs", NULL);
if (IS_ERR(mnt))
panic("Can't create rootfs");
- ns = kmalloc(sizeof(*ns), GFP_KERNEL);
- if (!ns)
+ ns = create_mnt_ns(mnt);
+ if (IS_ERR(ns))
panic("Can't allocate initial namespace");
- atomic_set(&ns->count, 1);
- INIT_LIST_HEAD(&ns->list);
- init_waitqueue_head(&ns->poll);
- ns->event = 0;
- list_add(&mnt->mnt_list, &ns->list);
- ns->root = mnt;
- mnt->mnt_ns = ns;
init_task.nsproxy->mnt_ns = ns;
get_mnt_ns(ns);
diff --git a/fs/nilfs2/inode.c b/fs/nilfs2/inode.c
index 2696d6b..fe9d8f2 100644
--- a/fs/nilfs2/inode.c
+++ b/fs/nilfs2/inode.c
@@ -309,10 +309,6 @@
/* ii->i_file_acl = 0; */
/* ii->i_dir_acl = 0; */
ii->i_dir_start_lookup = 0;
-#ifdef CONFIG_NILFS_FS_POSIX_ACL
- ii->i_acl = NULL;
- ii->i_default_acl = NULL;
-#endif
ii->i_cno = 0;
nilfs_set_inode_flags(inode);
spin_lock(&sbi->s_next_gen_lock);
@@ -434,10 +430,6 @@
raw_inode = nilfs_ifile_map_inode(sbi->s_ifile, ino, bh);
-#ifdef CONFIG_NILFS_FS_POSIX_ACL
- ii->i_acl = NILFS_ACL_NOT_CACHED;
- ii->i_default_acl = NILFS_ACL_NOT_CACHED;
-#endif
if (nilfs_read_inode_common(inode, raw_inode))
goto failed_unmap;
diff --git a/fs/nilfs2/nilfs.h b/fs/nilfs2/nilfs.h
index edf6a59..724c637 100644
--- a/fs/nilfs2/nilfs.h
+++ b/fs/nilfs2/nilfs.h
@@ -58,10 +58,6 @@
*/
struct rw_semaphore xattr_sem;
#endif
-#ifdef CONFIG_NILFS_POSIX_ACL
- struct posix_acl *i_acl;
- struct posix_acl *i_default_acl;
-#endif
struct buffer_head *i_bh; /* i_bh contains a new or dirty
disk inode */
struct inode vfs_inode;
diff --git a/fs/nilfs2/super.c b/fs/nilfs2/super.c
index ab785f8..8e2ec43 100644
--- a/fs/nilfs2/super.c
+++ b/fs/nilfs2/super.c
@@ -189,16 +189,6 @@
{
struct nilfs_inode_info *ii = NILFS_I(inode);
-#ifdef CONFIG_NILFS_POSIX_ACL
- if (ii->i_acl && ii->i_acl != NILFS_ACL_NOT_CACHED) {
- posix_acl_release(ii->i_acl);
- ii->i_acl = NILFS_ACL_NOT_CACHED;
- }
- if (ii->i_default_acl && ii->i_default_acl != NILFS_ACL_NOT_CACHED) {
- posix_acl_release(ii->i_default_acl);
- ii->i_default_acl = NILFS_ACL_NOT_CACHED;
- }
-#endif
/*
* Free resources allocated in nilfs_read_inode(), here.
*/
diff --git a/fs/ocfs2/dlmglue.c b/fs/ocfs2/dlmglue.c
index 6cdeaa7..110bb57 100644
--- a/fs/ocfs2/dlmglue.c
+++ b/fs/ocfs2/dlmglue.c
@@ -92,6 +92,9 @@
enum ocfs2_unblock_action unblock_action;
};
+/* Lockdep class keys */
+struct lock_class_key lockdep_keys[OCFS2_NUM_LOCK_TYPES];
+
static int ocfs2_check_meta_downconvert(struct ocfs2_lock_res *lockres,
int new_level);
static void ocfs2_set_meta_lvb(struct ocfs2_lock_res *lockres);
@@ -317,9 +320,16 @@
u32 dlm_flags);
static inline int ocfs2_may_continue_on_blocked_lock(struct ocfs2_lock_res *lockres,
int wanted);
-static void ocfs2_cluster_unlock(struct ocfs2_super *osb,
- struct ocfs2_lock_res *lockres,
- int level);
+static void __ocfs2_cluster_unlock(struct ocfs2_super *osb,
+ struct ocfs2_lock_res *lockres,
+ int level, unsigned long caller_ip);
+static inline void ocfs2_cluster_unlock(struct ocfs2_super *osb,
+ struct ocfs2_lock_res *lockres,
+ int level)
+{
+ __ocfs2_cluster_unlock(osb, lockres, level, _RET_IP_);
+}
+
static inline void ocfs2_generic_handle_downconvert_action(struct ocfs2_lock_res *lockres);
static inline void ocfs2_generic_handle_convert_action(struct ocfs2_lock_res *lockres);
static inline void ocfs2_generic_handle_attach_action(struct ocfs2_lock_res *lockres);
@@ -489,6 +499,13 @@
ocfs2_add_lockres_tracking(res, osb->osb_dlm_debug);
ocfs2_init_lock_stats(res);
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+ if (type != OCFS2_LOCK_TYPE_OPEN)
+ lockdep_init_map(&res->l_lockdep_map, ocfs2_lock_type_strings[type],
+ &lockdep_keys[type], 0);
+ else
+ res->l_lockdep_map.key = NULL;
+#endif
}
void ocfs2_lock_res_init_once(struct ocfs2_lock_res *res)
@@ -644,14 +661,10 @@
static void ocfs2_orphan_scan_lock_res_init(struct ocfs2_lock_res *res,
struct ocfs2_super *osb)
{
- struct ocfs2_orphan_scan_lvb *lvb;
-
ocfs2_lock_res_init_once(res);
ocfs2_build_lock_name(OCFS2_LOCK_TYPE_ORPHAN_SCAN, 0, 0, res->l_name);
ocfs2_lock_res_init_common(osb, res, OCFS2_LOCK_TYPE_ORPHAN_SCAN,
&ocfs2_orphan_scan_lops, osb);
- lvb = ocfs2_dlm_lvb(&res->l_lksb);
- lvb->lvb_version = OCFS2_ORPHAN_LVB_VERSION;
}
void ocfs2_file_lock_res_init(struct ocfs2_lock_res *lockres,
@@ -1256,11 +1269,13 @@
return ret;
}
-static int ocfs2_cluster_lock(struct ocfs2_super *osb,
- struct ocfs2_lock_res *lockres,
- int level,
- u32 lkm_flags,
- int arg_flags)
+static int __ocfs2_cluster_lock(struct ocfs2_super *osb,
+ struct ocfs2_lock_res *lockres,
+ int level,
+ u32 lkm_flags,
+ int arg_flags,
+ int l_subclass,
+ unsigned long caller_ip)
{
struct ocfs2_mask_waiter mw;
int wait, catch_signals = !(osb->s_mount_opt & OCFS2_MOUNT_NOINTR);
@@ -1403,13 +1418,37 @@
}
ocfs2_update_lock_stats(lockres, level, &mw, ret);
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+ if (!ret && lockres->l_lockdep_map.key != NULL) {
+ if (level == DLM_LOCK_PR)
+ rwsem_acquire_read(&lockres->l_lockdep_map, l_subclass,
+ !!(arg_flags & OCFS2_META_LOCK_NOQUEUE),
+ caller_ip);
+ else
+ rwsem_acquire(&lockres->l_lockdep_map, l_subclass,
+ !!(arg_flags & OCFS2_META_LOCK_NOQUEUE),
+ caller_ip);
+ }
+#endif
mlog_exit(ret);
return ret;
}
-static void ocfs2_cluster_unlock(struct ocfs2_super *osb,
- struct ocfs2_lock_res *lockres,
- int level)
+static inline int ocfs2_cluster_lock(struct ocfs2_super *osb,
+ struct ocfs2_lock_res *lockres,
+ int level,
+ u32 lkm_flags,
+ int arg_flags)
+{
+ return __ocfs2_cluster_lock(osb, lockres, level, lkm_flags, arg_flags,
+ 0, _RET_IP_);
+}
+
+
+static void __ocfs2_cluster_unlock(struct ocfs2_super *osb,
+ struct ocfs2_lock_res *lockres,
+ int level,
+ unsigned long caller_ip)
{
unsigned long flags;
@@ -1418,6 +1457,10 @@
ocfs2_dec_holders(lockres, level);
ocfs2_downconvert_on_unlock(osb, lockres);
spin_unlock_irqrestore(&lockres->l_lock, flags);
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+ if (lockres->l_lockdep_map.key != NULL)
+ rwsem_release(&lockres->l_lockdep_map, 1, caller_ip);
+#endif
mlog_exit_void();
}
@@ -1989,7 +2032,8 @@
{
struct ocfs2_meta_lvb *lvb = ocfs2_dlm_lvb(&lockres->l_lksb);
- if (lvb->lvb_version == OCFS2_LVB_VERSION
+ if (ocfs2_dlm_lvb_valid(&lockres->l_lksb)
+ && lvb->lvb_version == OCFS2_LVB_VERSION
&& be32_to_cpu(lvb->lvb_igeneration) == inode->i_generation)
return 1;
return 0;
@@ -2162,10 +2206,11 @@
* returns < 0 error if the callback will never be called, otherwise
* the result of the lock will be communicated via the callback.
*/
-int ocfs2_inode_lock_full(struct inode *inode,
- struct buffer_head **ret_bh,
- int ex,
- int arg_flags)
+int ocfs2_inode_lock_full_nested(struct inode *inode,
+ struct buffer_head **ret_bh,
+ int ex,
+ int arg_flags,
+ int subclass)
{
int status, level, acquired;
u32 dlm_flags;
@@ -2203,7 +2248,8 @@
if (arg_flags & OCFS2_META_LOCK_NOQUEUE)
dlm_flags |= DLM_LKF_NOQUEUE;
- status = ocfs2_cluster_lock(osb, lockres, level, dlm_flags, arg_flags);
+ status = __ocfs2_cluster_lock(osb, lockres, level, dlm_flags,
+ arg_flags, subclass, _RET_IP_);
if (status < 0) {
if (status != -EAGAIN && status != -EIOCBRETRY)
mlog_errno(status);
@@ -2369,35 +2415,45 @@
mlog_exit_void();
}
-int ocfs2_orphan_scan_lock(struct ocfs2_super *osb, u32 *seqno, int ex)
+int ocfs2_orphan_scan_lock(struct ocfs2_super *osb, u32 *seqno)
{
struct ocfs2_lock_res *lockres;
struct ocfs2_orphan_scan_lvb *lvb;
- int level = ex ? DLM_LOCK_EX : DLM_LOCK_PR;
int status = 0;
+ if (ocfs2_is_hard_readonly(osb))
+ return -EROFS;
+
+ if (ocfs2_mount_local(osb))
+ return 0;
+
lockres = &osb->osb_orphan_scan.os_lockres;
- status = ocfs2_cluster_lock(osb, lockres, level, 0, 0);
+ status = ocfs2_cluster_lock(osb, lockres, DLM_LOCK_EX, 0, 0);
if (status < 0)
return status;
lvb = ocfs2_dlm_lvb(&lockres->l_lksb);
- if (lvb->lvb_version == OCFS2_ORPHAN_LVB_VERSION)
+ if (ocfs2_dlm_lvb_valid(&lockres->l_lksb) &&
+ lvb->lvb_version == OCFS2_ORPHAN_LVB_VERSION)
*seqno = be32_to_cpu(lvb->lvb_os_seqno);
+ else
+ *seqno = osb->osb_orphan_scan.os_seqno + 1;
+
return status;
}
-void ocfs2_orphan_scan_unlock(struct ocfs2_super *osb, u32 seqno, int ex)
+void ocfs2_orphan_scan_unlock(struct ocfs2_super *osb, u32 seqno)
{
struct ocfs2_lock_res *lockres;
struct ocfs2_orphan_scan_lvb *lvb;
- int level = ex ? DLM_LOCK_EX : DLM_LOCK_PR;
- lockres = &osb->osb_orphan_scan.os_lockres;
- lvb = ocfs2_dlm_lvb(&lockres->l_lksb);
- lvb->lvb_version = OCFS2_ORPHAN_LVB_VERSION;
- lvb->lvb_os_seqno = cpu_to_be32(seqno);
- ocfs2_cluster_unlock(osb, lockres, level);
+ if (!ocfs2_is_hard_readonly(osb) && !ocfs2_mount_local(osb)) {
+ lockres = &osb->osb_orphan_scan.os_lockres;
+ lvb = ocfs2_dlm_lvb(&lockres->l_lksb);
+ lvb->lvb_version = OCFS2_ORPHAN_LVB_VERSION;
+ lvb->lvb_os_seqno = cpu_to_be32(seqno);
+ ocfs2_cluster_unlock(osb, lockres, DLM_LOCK_EX);
+ }
}
int ocfs2_super_lock(struct ocfs2_super *osb,
@@ -3627,7 +3683,8 @@
struct ocfs2_global_disk_dqinfo *gdinfo;
int status = 0;
- if (lvb->lvb_version == OCFS2_QINFO_LVB_VERSION) {
+ if (ocfs2_dlm_lvb_valid(&lockres->l_lksb) &&
+ lvb->lvb_version == OCFS2_QINFO_LVB_VERSION) {
info->dqi_bgrace = be32_to_cpu(lvb->lvb_bgrace);
info->dqi_igrace = be32_to_cpu(lvb->lvb_igrace);
oinfo->dqi_syncms = be32_to_cpu(lvb->lvb_syncms);
diff --git a/fs/ocfs2/dlmglue.h b/fs/ocfs2/dlmglue.h
index 31b90d7..75538369 100644
--- a/fs/ocfs2/dlmglue.h
+++ b/fs/ocfs2/dlmglue.h
@@ -78,6 +78,14 @@
/* don't block waiting for the downconvert thread, instead return -EAGAIN */
#define OCFS2_LOCK_NONBLOCK (0x04)
+/* Locking subclasses of inode cluster lock */
+enum {
+ OI_LS_NORMAL = 0,
+ OI_LS_PARENT,
+ OI_LS_RENAME1,
+ OI_LS_RENAME2,
+};
+
int ocfs2_dlm_init(struct ocfs2_super *osb);
void ocfs2_dlm_shutdown(struct ocfs2_super *osb, int hangup_pending);
void ocfs2_lock_res_init_once(struct ocfs2_lock_res *res);
@@ -104,25 +112,31 @@
int ocfs2_inode_lock_atime(struct inode *inode,
struct vfsmount *vfsmnt,
int *level);
-int ocfs2_inode_lock_full(struct inode *inode,
+int ocfs2_inode_lock_full_nested(struct inode *inode,
struct buffer_head **ret_bh,
int ex,
- int arg_flags);
+ int arg_flags,
+ int subclass);
int ocfs2_inode_lock_with_page(struct inode *inode,
struct buffer_head **ret_bh,
int ex,
struct page *page);
+/* Variants without special locking class or flags */
+#define ocfs2_inode_lock_full(i, r, e, f)\
+ ocfs2_inode_lock_full_nested(i, r, e, f, OI_LS_NORMAL)
+#define ocfs2_inode_lock_nested(i, b, e, s)\
+ ocfs2_inode_lock_full_nested(i, b, e, 0, s)
/* 99% of the time we don't want to supply any additional flags --
* those are for very specific cases only. */
-#define ocfs2_inode_lock(i, b, e) ocfs2_inode_lock_full(i, b, e, 0)
+#define ocfs2_inode_lock(i, b, e) ocfs2_inode_lock_full_nested(i, b, e, 0, OI_LS_NORMAL)
void ocfs2_inode_unlock(struct inode *inode,
int ex);
int ocfs2_super_lock(struct ocfs2_super *osb,
int ex);
void ocfs2_super_unlock(struct ocfs2_super *osb,
int ex);
-int ocfs2_orphan_scan_lock(struct ocfs2_super *osb, u32 *seqno, int ex);
-void ocfs2_orphan_scan_unlock(struct ocfs2_super *osb, u32 seqno, int ex);
+int ocfs2_orphan_scan_lock(struct ocfs2_super *osb, u32 *seqno);
+void ocfs2_orphan_scan_unlock(struct ocfs2_super *osb, u32 seqno);
int ocfs2_rename_lock(struct ocfs2_super *osb);
void ocfs2_rename_unlock(struct ocfs2_super *osb);
diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c
index 07267e0..62442e4 100644
--- a/fs/ocfs2/file.c
+++ b/fs/ocfs2/file.c
@@ -2026,7 +2026,7 @@
size_t len,
unsigned int flags)
{
- int ret = 0;
+ int ret = 0, lock_level = 0;
struct inode *inode = in->f_path.dentry->d_inode;
mlog_entry("(0x%p, 0x%p, %u, '%.*s')\n", in, pipe,
@@ -2037,12 +2037,12 @@
/*
* See the comment in ocfs2_file_aio_read()
*/
- ret = ocfs2_inode_lock(inode, NULL, 0);
+ ret = ocfs2_inode_lock_atime(inode, in->f_vfsmnt, &lock_level);
if (ret < 0) {
mlog_errno(ret);
goto bail;
}
- ocfs2_inode_unlock(inode, 0);
+ ocfs2_inode_unlock(inode, lock_level);
ret = generic_file_splice_read(in, ppos, pipe, len, flags);
diff --git a/fs/ocfs2/inode.c b/fs/ocfs2/inode.c
index 10e1fa87..4dc8890 100644
--- a/fs/ocfs2/inode.c
+++ b/fs/ocfs2/inode.c
@@ -215,6 +215,8 @@
static int ocfs2_init_locked_inode(struct inode *inode, void *opaque)
{
struct ocfs2_find_inode_args *args = opaque;
+ static struct lock_class_key ocfs2_quota_ip_alloc_sem_key,
+ ocfs2_file_ip_alloc_sem_key;
mlog_entry("inode = %p, opaque = %p\n", inode, opaque);
@@ -223,6 +225,15 @@
if (args->fi_sysfile_type != 0)
lockdep_set_class(&inode->i_mutex,
&ocfs2_sysfile_lock_key[args->fi_sysfile_type]);
+ if (args->fi_sysfile_type == USER_QUOTA_SYSTEM_INODE ||
+ args->fi_sysfile_type == GROUP_QUOTA_SYSTEM_INODE ||
+ args->fi_sysfile_type == LOCAL_USER_QUOTA_SYSTEM_INODE ||
+ args->fi_sysfile_type == LOCAL_GROUP_QUOTA_SYSTEM_INODE)
+ lockdep_set_class(&OCFS2_I(inode)->ip_alloc_sem,
+ &ocfs2_quota_ip_alloc_sem_key);
+ else
+ lockdep_set_class(&OCFS2_I(inode)->ip_alloc_sem,
+ &ocfs2_file_ip_alloc_sem_key);
mlog_exit(0);
return 0;
diff --git a/fs/ocfs2/journal.c b/fs/ocfs2/journal.c
index 4a3b9e6..f033760 100644
--- a/fs/ocfs2/journal.c
+++ b/fs/ocfs2/journal.c
@@ -1880,13 +1880,20 @@
os = &osb->osb_orphan_scan;
- status = ocfs2_orphan_scan_lock(osb, &seqno, DLM_LOCK_EX);
+ if (atomic_read(&os->os_state) == ORPHAN_SCAN_INACTIVE)
+ goto out;
+
+ status = ocfs2_orphan_scan_lock(osb, &seqno);
if (status < 0) {
if (status != -EAGAIN)
mlog_errno(status);
goto out;
}
+ /* Do no queue the tasks if the volume is being umounted */
+ if (atomic_read(&os->os_state) == ORPHAN_SCAN_INACTIVE)
+ goto unlock;
+
if (os->os_seqno != seqno) {
os->os_seqno = seqno;
goto unlock;
@@ -1903,7 +1910,7 @@
os->os_count++;
os->os_scantime = CURRENT_TIME;
unlock:
- ocfs2_orphan_scan_unlock(osb, seqno, DLM_LOCK_EX);
+ ocfs2_orphan_scan_unlock(osb, seqno);
out:
return;
}
@@ -1920,8 +1927,9 @@
mutex_lock(&os->os_lock);
ocfs2_queue_orphan_scan(osb);
- schedule_delayed_work(&os->os_orphan_scan_work,
- ocfs2_orphan_scan_timeout());
+ if (atomic_read(&os->os_state) == ORPHAN_SCAN_ACTIVE)
+ schedule_delayed_work(&os->os_orphan_scan_work,
+ ocfs2_orphan_scan_timeout());
mutex_unlock(&os->os_lock);
}
@@ -1930,26 +1938,33 @@
struct ocfs2_orphan_scan *os;
os = &osb->osb_orphan_scan;
- mutex_lock(&os->os_lock);
- cancel_delayed_work(&os->os_orphan_scan_work);
- mutex_unlock(&os->os_lock);
+ if (atomic_read(&os->os_state) == ORPHAN_SCAN_ACTIVE) {
+ atomic_set(&os->os_state, ORPHAN_SCAN_INACTIVE);
+ mutex_lock(&os->os_lock);
+ cancel_delayed_work(&os->os_orphan_scan_work);
+ mutex_unlock(&os->os_lock);
+ }
}
-int ocfs2_orphan_scan_init(struct ocfs2_super *osb)
+void ocfs2_orphan_scan_init(struct ocfs2_super *osb)
{
struct ocfs2_orphan_scan *os;
os = &osb->osb_orphan_scan;
os->os_osb = osb;
os->os_count = 0;
+ os->os_seqno = 0;
os->os_scantime = CURRENT_TIME;
mutex_init(&os->os_lock);
+ INIT_DELAYED_WORK(&os->os_orphan_scan_work, ocfs2_orphan_scan_work);
- INIT_DELAYED_WORK(&os->os_orphan_scan_work,
- ocfs2_orphan_scan_work);
- schedule_delayed_work(&os->os_orphan_scan_work,
- ocfs2_orphan_scan_timeout());
- return 0;
+ if (ocfs2_is_hard_readonly(osb) || ocfs2_mount_local(osb))
+ atomic_set(&os->os_state, ORPHAN_SCAN_INACTIVE);
+ else {
+ atomic_set(&os->os_state, ORPHAN_SCAN_ACTIVE);
+ schedule_delayed_work(&os->os_orphan_scan_work,
+ ocfs2_orphan_scan_timeout());
+ }
}
struct ocfs2_orphan_filldir_priv {
diff --git a/fs/ocfs2/journal.h b/fs/ocfs2/journal.h
index 61045ee..5432c7f 100644
--- a/fs/ocfs2/journal.h
+++ b/fs/ocfs2/journal.h
@@ -144,7 +144,7 @@
}
/* Exported only for the journal struct init code in super.c. Do not call. */
-int ocfs2_orphan_scan_init(struct ocfs2_super *osb);
+void ocfs2_orphan_scan_init(struct ocfs2_super *osb);
void ocfs2_orphan_scan_stop(struct ocfs2_super *osb);
void ocfs2_orphan_scan_exit(struct ocfs2_super *osb);
diff --git a/fs/ocfs2/namei.c b/fs/ocfs2/namei.c
index 33464c6..8601f93 100644
--- a/fs/ocfs2/namei.c
+++ b/fs/ocfs2/namei.c
@@ -118,7 +118,7 @@
mlog(0, "find name %.*s in directory %llu\n", dentry->d_name.len,
dentry->d_name.name, (unsigned long long)OCFS2_I(dir)->ip_blkno);
- status = ocfs2_inode_lock(dir, NULL, 0);
+ status = ocfs2_inode_lock_nested(dir, NULL, 0, OI_LS_PARENT);
if (status < 0) {
if (status != -ENOENT)
mlog_errno(status);
@@ -636,7 +636,7 @@
if (S_ISDIR(inode->i_mode))
return -EPERM;
- err = ocfs2_inode_lock(dir, &parent_fe_bh, 1);
+ err = ocfs2_inode_lock_nested(dir, &parent_fe_bh, 1, OI_LS_PARENT);
if (err < 0) {
if (err != -ENOENT)
mlog_errno(err);
@@ -800,7 +800,8 @@
return -EPERM;
}
- status = ocfs2_inode_lock(dir, &parent_node_bh, 1);
+ status = ocfs2_inode_lock_nested(dir, &parent_node_bh, 1,
+ OI_LS_PARENT);
if (status < 0) {
if (status != -ENOENT)
mlog_errno(status);
@@ -978,7 +979,8 @@
inode1 = tmpinode;
}
/* lock id2 */
- status = ocfs2_inode_lock(inode2, bh2, 1);
+ status = ocfs2_inode_lock_nested(inode2, bh2, 1,
+ OI_LS_RENAME1);
if (status < 0) {
if (status != -ENOENT)
mlog_errno(status);
@@ -987,7 +989,7 @@
}
/* lock id1 */
- status = ocfs2_inode_lock(inode1, bh1, 1);
+ status = ocfs2_inode_lock_nested(inode1, bh1, 1, OI_LS_RENAME2);
if (status < 0) {
/*
* An error return must mean that no cluster locks
@@ -1103,7 +1105,8 @@
* won't have to concurrently downconvert the inode and the
* dentry locks.
*/
- status = ocfs2_inode_lock(old_inode, &old_inode_bh, 1);
+ status = ocfs2_inode_lock_nested(old_inode, &old_inode_bh, 1,
+ OI_LS_PARENT);
if (status < 0) {
if (status != -ENOENT)
mlog_errno(status);
diff --git a/fs/ocfs2/ocfs2.h b/fs/ocfs2/ocfs2.h
index 18c1d9e..c9345eb 100644
--- a/fs/ocfs2/ocfs2.h
+++ b/fs/ocfs2/ocfs2.h
@@ -34,6 +34,7 @@
#include <linux/workqueue.h>
#include <linux/kref.h>
#include <linux/mutex.h>
+#include <linux/lockdep.h>
#ifndef CONFIG_OCFS2_COMPAT_JBD
# include <linux/jbd2.h>
#else
@@ -152,6 +153,14 @@
unsigned int l_lock_max_exmode; /* Max wait for EX */
unsigned int l_lock_refresh; /* Disk refreshes */
#endif
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+ struct lockdep_map l_lockdep_map;
+#endif
+};
+
+enum ocfs2_orphan_scan_state {
+ ORPHAN_SCAN_ACTIVE,
+ ORPHAN_SCAN_INACTIVE
};
struct ocfs2_orphan_scan {
@@ -162,6 +171,7 @@
struct timespec os_scantime; /* time this node ran the scan */
u32 os_count; /* tracks node specific scans */
u32 os_seqno; /* tracks cluster wide scans */
+ atomic_t os_state; /* ACTIVE or INACTIVE */
};
struct ocfs2_dlm_debug {
diff --git a/fs/ocfs2/stack_o2cb.c b/fs/ocfs2/stack_o2cb.c
index fcd120f..3f66137 100644
--- a/fs/ocfs2/stack_o2cb.c
+++ b/fs/ocfs2/stack_o2cb.c
@@ -236,6 +236,16 @@
return dlm_status_to_errno(lksb->lksb_o2dlm.status);
}
+/*
+ * o2dlm aways has a "valid" LVB. If the dlm loses track of the LVB
+ * contents, it will zero out the LVB. Thus the caller can always trust
+ * the contents.
+ */
+static int o2cb_dlm_lvb_valid(union ocfs2_dlm_lksb *lksb)
+{
+ return 1;
+}
+
static void *o2cb_dlm_lvb(union ocfs2_dlm_lksb *lksb)
{
return (void *)(lksb->lksb_o2dlm.lvb);
@@ -354,6 +364,7 @@
.dlm_lock = o2cb_dlm_lock,
.dlm_unlock = o2cb_dlm_unlock,
.lock_status = o2cb_dlm_lock_status,
+ .lvb_valid = o2cb_dlm_lvb_valid,
.lock_lvb = o2cb_dlm_lvb,
.dump_lksb = o2cb_dump_lksb,
};
diff --git a/fs/ocfs2/stack_user.c b/fs/ocfs2/stack_user.c
index 9b76d41..ff4c798 100644
--- a/fs/ocfs2/stack_user.c
+++ b/fs/ocfs2/stack_user.c
@@ -738,6 +738,13 @@
return lksb->lksb_fsdlm.sb_status;
}
+static int user_dlm_lvb_valid(union ocfs2_dlm_lksb *lksb)
+{
+ int invalid = lksb->lksb_fsdlm.sb_flags & DLM_SBF_VALNOTVALID;
+
+ return !invalid;
+}
+
static void *user_dlm_lvb(union ocfs2_dlm_lksb *lksb)
{
if (!lksb->lksb_fsdlm.sb_lvbptr)
@@ -873,6 +880,7 @@
.dlm_lock = user_dlm_lock,
.dlm_unlock = user_dlm_unlock,
.lock_status = user_dlm_lock_status,
+ .lvb_valid = user_dlm_lvb_valid,
.lock_lvb = user_dlm_lvb,
.plock = user_plock,
.dump_lksb = user_dlm_dump_lksb,
diff --git a/fs/ocfs2/stackglue.c b/fs/ocfs2/stackglue.c
index 68b668b..3f2f1c4 100644
--- a/fs/ocfs2/stackglue.c
+++ b/fs/ocfs2/stackglue.c
@@ -6,7 +6,7 @@
* Code which implements an OCFS2 specific interface to underlying
* cluster stacks.
*
- * Copyright (C) 2007 Oracle. All rights reserved.
+ * Copyright (C) 2007, 2009 Oracle. All rights reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public
@@ -271,11 +271,12 @@
}
EXPORT_SYMBOL_GPL(ocfs2_dlm_lock_status);
-/*
- * Why don't we cast to ocfs2_meta_lvb? The "clean" answer is that we
- * don't cast at the glue level. The real answer is that the header
- * ordering is nigh impossible.
- */
+int ocfs2_dlm_lvb_valid(union ocfs2_dlm_lksb *lksb)
+{
+ return active_stack->sp_ops->lvb_valid(lksb);
+}
+EXPORT_SYMBOL_GPL(ocfs2_dlm_lvb_valid);
+
void *ocfs2_dlm_lvb(union ocfs2_dlm_lksb *lksb)
{
return active_stack->sp_ops->lock_lvb(lksb);
diff --git a/fs/ocfs2/stackglue.h b/fs/ocfs2/stackglue.h
index c571af3..03a44d6 100644
--- a/fs/ocfs2/stackglue.h
+++ b/fs/ocfs2/stackglue.h
@@ -186,6 +186,11 @@
int (*lock_status)(union ocfs2_dlm_lksb *lksb);
/*
+ * Return non-zero if the LVB is valid.
+ */
+ int (*lvb_valid)(union ocfs2_dlm_lksb *lksb);
+
+ /*
* Pull the lvb pointer off of the stack-specific lksb.
*/
void *(*lock_lvb)(union ocfs2_dlm_lksb *lksb);
@@ -252,6 +257,7 @@
struct ocfs2_lock_res *astarg);
int ocfs2_dlm_lock_status(union ocfs2_dlm_lksb *lksb);
+int ocfs2_dlm_lvb_valid(union ocfs2_dlm_lksb *lksb);
void *ocfs2_dlm_lvb(union ocfs2_dlm_lksb *lksb);
void ocfs2_dlm_dump_lksb(union ocfs2_dlm_lksb *lksb);
diff --git a/fs/ocfs2/suballoc.c b/fs/ocfs2/suballoc.c
index 8439f6b..73a16d4 100644
--- a/fs/ocfs2/suballoc.c
+++ b/fs/ocfs2/suballoc.c
@@ -923,14 +923,23 @@
int nr)
{
struct ocfs2_group_desc *bg = (struct ocfs2_group_desc *) bg_bh->b_data;
+ int ret;
if (ocfs2_test_bit(nr, (unsigned long *)bg->bg_bitmap))
return 0;
- if (!buffer_jbd(bg_bh) || !bh2jh(bg_bh)->b_committed_data)
+
+ if (!buffer_jbd(bg_bh))
return 1;
+ jbd_lock_bh_state(bg_bh);
bg = (struct ocfs2_group_desc *) bh2jh(bg_bh)->b_committed_data;
- return !ocfs2_test_bit(nr, (unsigned long *)bg->bg_bitmap);
+ if (bg)
+ ret = !ocfs2_test_bit(nr, (unsigned long *)bg->bg_bitmap);
+ else
+ ret = 1;
+ jbd_unlock_bh_state(bg_bh);
+
+ return ret;
}
static int ocfs2_block_group_find_clear_bits(struct ocfs2_super *osb,
@@ -1885,6 +1894,7 @@
unsigned int tmp;
int journal_type = OCFS2_JOURNAL_ACCESS_WRITE;
struct ocfs2_group_desc *undo_bg = NULL;
+ int cluster_bitmap = 0;
mlog_entry_void();
@@ -1905,18 +1915,28 @@
}
if (ocfs2_is_cluster_bitmap(alloc_inode))
- undo_bg = (struct ocfs2_group_desc *) bh2jh(group_bh)->b_committed_data;
+ cluster_bitmap = 1;
+
+ if (cluster_bitmap) {
+ jbd_lock_bh_state(group_bh);
+ undo_bg = (struct ocfs2_group_desc *)
+ bh2jh(group_bh)->b_committed_data;
+ BUG_ON(!undo_bg);
+ }
tmp = num_bits;
while(tmp--) {
ocfs2_clear_bit((bit_off + tmp),
(unsigned long *) bg->bg_bitmap);
- if (ocfs2_is_cluster_bitmap(alloc_inode))
+ if (cluster_bitmap)
ocfs2_set_bit(bit_off + tmp,
(unsigned long *) undo_bg->bg_bitmap);
}
le16_add_cpu(&bg->bg_free_bits_count, num_bits);
+ if (cluster_bitmap)
+ jbd_unlock_bh_state(group_bh);
+
status = ocfs2_journal_dirty(handle, group_bh);
if (status < 0)
mlog_errno(status);
diff --git a/fs/ocfs2/super.c b/fs/ocfs2/super.c
index 0d3ed74..7efb349 100644
--- a/fs/ocfs2/super.c
+++ b/fs/ocfs2/super.c
@@ -205,11 +205,10 @@
#ifdef CONFIG_DEBUG_FS
static int ocfs2_osb_dump(struct ocfs2_super *osb, char *buf, int len)
{
- int out = 0;
- int i;
struct ocfs2_cluster_connection *cconn = osb->cconn;
struct ocfs2_recovery_map *rm = osb->recovery_map;
- struct ocfs2_orphan_scan *os;
+ struct ocfs2_orphan_scan *os = &osb->osb_orphan_scan;
+ int i, out = 0;
out += snprintf(buf + out, len - out,
"%10s => Id: %-s Uuid: %-s Gen: 0x%X Label: %-s\n",
@@ -234,20 +233,24 @@
"%10s => Opts: 0x%lX AtimeQuanta: %u\n", "Mount",
osb->s_mount_opt, osb->s_atime_quantum);
- out += snprintf(buf + out, len - out,
- "%10s => Stack: %s Name: %*s Version: %d.%d\n",
- "Cluster",
- (*osb->osb_cluster_stack == '\0' ?
- "o2cb" : osb->osb_cluster_stack),
- cconn->cc_namelen, cconn->cc_name,
- cconn->cc_version.pv_major, cconn->cc_version.pv_minor);
+ if (cconn) {
+ out += snprintf(buf + out, len - out,
+ "%10s => Stack: %s Name: %*s "
+ "Version: %d.%d\n", "Cluster",
+ (*osb->osb_cluster_stack == '\0' ?
+ "o2cb" : osb->osb_cluster_stack),
+ cconn->cc_namelen, cconn->cc_name,
+ cconn->cc_version.pv_major,
+ cconn->cc_version.pv_minor);
+ }
spin_lock(&osb->dc_task_lock);
out += snprintf(buf + out, len - out,
"%10s => Pid: %d Count: %lu WakeSeq: %lu "
"WorkSeq: %lu\n", "DownCnvt",
- task_pid_nr(osb->dc_task), osb->blocked_lock_count,
- osb->dc_wake_sequence, osb->dc_work_sequence);
+ (osb->dc_task ? task_pid_nr(osb->dc_task) : -1),
+ osb->blocked_lock_count, osb->dc_wake_sequence,
+ osb->dc_work_sequence);
spin_unlock(&osb->dc_task_lock);
spin_lock(&osb->osb_lock);
@@ -267,14 +270,15 @@
out += snprintf(buf + out, len - out,
"%10s => Pid: %d Interval: %lu Needs: %d\n", "Commit",
- task_pid_nr(osb->commit_task), osb->osb_commit_interval,
+ (osb->commit_task ? task_pid_nr(osb->commit_task) : -1),
+ osb->osb_commit_interval,
atomic_read(&osb->needs_checkpoint));
out += snprintf(buf + out, len - out,
- "%10s => State: %d NumTxns: %d TxnId: %lu\n",
+ "%10s => State: %d TxnId: %lu NumTxns: %d\n",
"Journal", osb->journal->j_state,
- atomic_read(&osb->journal->j_num_trans),
- osb->journal->j_trans_id);
+ osb->journal->j_trans_id,
+ atomic_read(&osb->journal->j_num_trans));
out += snprintf(buf + out, len - out,
"%10s => GlobalAllocs: %d LocalAllocs: %d "
@@ -300,9 +304,18 @@
atomic_read(&osb->s_num_inodes_stolen));
spin_unlock(&osb->osb_lock);
+ out += snprintf(buf + out, len - out, "OrphanScan => ");
+ out += snprintf(buf + out, len - out, "Local: %u Global: %u ",
+ os->os_count, os->os_seqno);
+ out += snprintf(buf + out, len - out, " Last Scan: ");
+ if (atomic_read(&os->os_state) == ORPHAN_SCAN_INACTIVE)
+ out += snprintf(buf + out, len - out, "Disabled\n");
+ else
+ out += snprintf(buf + out, len - out, "%lu seconds ago\n",
+ (get_seconds() - os->os_scantime.tv_sec));
+
out += snprintf(buf + out, len - out, "%10s => %3s %10s\n",
"Slots", "Num", "RecoGen");
-
for (i = 0; i < osb->max_slots; ++i) {
out += snprintf(buf + out, len - out,
"%10s %c %3d %10d\n",
@@ -311,13 +324,6 @@
i, osb->slot_recovery_generations[i]);
}
- os = &osb->osb_orphan_scan;
- out += snprintf(buf + out, len - out, "Orphan Scan=> ");
- out += snprintf(buf + out, len - out, "Local: %u Global: %u ",
- os->os_count, os->os_seqno);
- out += snprintf(buf + out, len - out, " Last Scan: %lu seconds ago\n",
- (get_seconds() - os->os_scantime.tv_sec));
-
return out;
}
@@ -1175,6 +1181,9 @@
atomic_set(&osb->vol_state, VOLUME_MOUNTED_QUOTAS);
wake_up(&osb->osb_mount_event);
+ /* Start this when the mount is almost sure of being successful */
+ ocfs2_orphan_scan_init(osb);
+
mlog_exit(status);
return status;
@@ -1810,14 +1819,15 @@
debugfs_remove(osb->osb_ctxt);
+ /* Orphan scan should be stopped as early as possible */
+ ocfs2_orphan_scan_stop(osb);
+
ocfs2_disable_quotas(osb);
ocfs2_shutdown_local_alloc(osb);
ocfs2_truncate_log_shutdown(osb);
- ocfs2_orphan_scan_stop(osb);
-
/* This will disable recovery and flush any recovery work. */
ocfs2_recovery_exit(osb);
@@ -1978,13 +1988,6 @@
goto bail;
}
- status = ocfs2_orphan_scan_init(osb);
- if (status) {
- mlog(ML_ERROR, "Unable to initialize delayed orphan scan\n");
- mlog_errno(status);
- goto bail;
- }
-
init_waitqueue_head(&osb->checkpoint_event);
atomic_set(&osb->needs_checkpoint, 0);
diff --git a/fs/ocfs2/sysfile.c b/fs/ocfs2/sysfile.c
index ab713eb..40e5370 100644
--- a/fs/ocfs2/sysfile.c
+++ b/fs/ocfs2/sysfile.c
@@ -50,6 +50,10 @@
int type,
u32 slot);
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+static struct lock_class_key ocfs2_sysfile_cluster_lock_key[NUM_SYSTEM_INODES];
+#endif
+
static inline int is_global_system_inode(int type)
{
return type >= OCFS2_FIRST_ONLINE_SYSTEM_INODE &&
@@ -118,6 +122,21 @@
inode = NULL;
goto bail;
}
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+ if (type == LOCAL_USER_QUOTA_SYSTEM_INODE ||
+ type == LOCAL_GROUP_QUOTA_SYSTEM_INODE ||
+ type == JOURNAL_SYSTEM_INODE) {
+ /* Ignore inode lock on these inodes as the lock does not
+ * really belong to any process and lockdep cannot handle
+ * that */
+ OCFS2_I(inode)->ip_inode_lockres.l_lockdep_map.key = NULL;
+ } else {
+ lockdep_init_map(&OCFS2_I(inode)->ip_inode_lockres.
+ l_lockdep_map,
+ ocfs2_system_inodes[type].si_name,
+ &ocfs2_sysfile_cluster_lock_key[type], 0);
+ }
+#endif
bail:
return inode;
diff --git a/fs/open.c b/fs/open.c
index 7200e23..dd98e80 100644
--- a/fs/open.c
+++ b/fs/open.c
@@ -378,63 +378,63 @@
#endif
#endif /* BITS_PER_LONG == 32 */
-SYSCALL_DEFINE(fallocate)(int fd, int mode, loff_t offset, loff_t len)
+
+int do_fallocate(struct file *file, int mode, loff_t offset, loff_t len)
{
- struct file *file;
- struct inode *inode;
- long ret = -EINVAL;
+ struct inode *inode = file->f_path.dentry->d_inode;
+ long ret;
if (offset < 0 || len <= 0)
- goto out;
+ return -EINVAL;
/* Return error if mode is not supported */
- ret = -EOPNOTSUPP;
if (mode && !(mode & FALLOC_FL_KEEP_SIZE))
- goto out;
+ return -EOPNOTSUPP;
- ret = -EBADF;
- file = fget(fd);
- if (!file)
- goto out;
if (!(file->f_mode & FMODE_WRITE))
- goto out_fput;
+ return -EBADF;
/*
* Revalidate the write permissions, in case security policy has
* changed since the files were opened.
*/
ret = security_file_permission(file, MAY_WRITE);
if (ret)
- goto out_fput;
+ return ret;
- inode = file->f_path.dentry->d_inode;
-
- ret = -ESPIPE;
if (S_ISFIFO(inode->i_mode))
- goto out_fput;
+ return -ESPIPE;
- ret = -ENODEV;
/*
* Let individual file system decide if it supports preallocation
* for directories or not.
*/
if (!S_ISREG(inode->i_mode) && !S_ISDIR(inode->i_mode))
- goto out_fput;
+ return -ENODEV;
- ret = -EFBIG;
/* Check for wrap through zero too */
if (((offset + len) > inode->i_sb->s_maxbytes) || ((offset + len) < 0))
- goto out_fput;
+ return -EFBIG;
- if (inode->i_op->fallocate)
- ret = inode->i_op->fallocate(inode, mode, offset, len);
- else
- ret = -EOPNOTSUPP;
+ if (!inode->i_op->fallocate)
+ return -EOPNOTSUPP;
-out_fput:
- fput(file);
-out:
- return ret;
+ return inode->i_op->fallocate(inode, mode, offset, len);
}
+
+SYSCALL_DEFINE(fallocate)(int fd, int mode, loff_t offset, loff_t len)
+{
+ struct file *file;
+ int error = -EBADF;
+
+ file = fget(fd);
+ if (file) {
+ error = do_fallocate(file, mode, offset, len);
+ fput(file);
+ }
+
+ return error;
+}
+
#ifdef CONFIG_HAVE_SYSCALL_WRAPPERS
asmlinkage long SyS_fallocate(long fd, long mode, loff_t offset, loff_t len)
{
diff --git a/fs/reiserfs/inode.c b/fs/reiserfs/inode.c
index 6fd0f47..a14d6cd 100644
--- a/fs/reiserfs/inode.c
+++ b/fs/reiserfs/inode.c
@@ -1131,8 +1131,6 @@
REISERFS_I(inode)->i_trans_id = 0;
REISERFS_I(inode)->i_jl = NULL;
mutex_init(&(REISERFS_I(inode)->i_mmap));
- reiserfs_init_acl_access(inode);
- reiserfs_init_acl_default(inode);
reiserfs_init_xattr_rwsem(inode);
if (stat_data_v1(ih)) {
@@ -1834,8 +1832,6 @@
REISERFS_I(dir)->i_attrs & REISERFS_INHERIT_MASK;
sd_attrs_to_i_attrs(REISERFS_I(inode)->i_attrs, inode);
mutex_init(&(REISERFS_I(inode)->i_mmap));
- reiserfs_init_acl_access(inode);
- reiserfs_init_acl_default(inode);
reiserfs_init_xattr_rwsem(inode);
/* key to search for correct place for new stat data */
diff --git a/fs/reiserfs/resize.c b/fs/reiserfs/resize.c
index 238e9d9..18b315d 100644
--- a/fs/reiserfs/resize.c
+++ b/fs/reiserfs/resize.c
@@ -82,7 +82,6 @@
if (reiserfs_allocate_list_bitmaps(s, jbitmap, bmap_nr_new) < 0) {
printk
("reiserfs_resize: unable to allocate memory for journal bitmaps\n");
- unlock_super(s);
return -ENOMEM;
}
/* the new journal bitmaps are zero filled, now we copy in the bitmap
diff --git a/fs/reiserfs/super.c b/fs/reiserfs/super.c
index 2969773..d3aeb06 100644
--- a/fs/reiserfs/super.c
+++ b/fs/reiserfs/super.c
@@ -529,10 +529,6 @@
INIT_LIST_HEAD(&ei->i_prealloc_list);
inode_init_once(&ei->vfs_inode);
-#ifdef CONFIG_REISERFS_FS_POSIX_ACL
- ei->i_acl_access = NULL;
- ei->i_acl_default = NULL;
-#endif
}
static int init_inodecache(void)
@@ -580,25 +576,6 @@
reiserfs_write_unlock(inode->i_sb);
}
-#ifdef CONFIG_REISERFS_FS_POSIX_ACL
-static void reiserfs_clear_inode(struct inode *inode)
-{
- struct posix_acl *acl;
-
- acl = REISERFS_I(inode)->i_acl_access;
- if (acl && !IS_ERR(acl))
- posix_acl_release(acl);
- REISERFS_I(inode)->i_acl_access = NULL;
-
- acl = REISERFS_I(inode)->i_acl_default;
- if (acl && !IS_ERR(acl))
- posix_acl_release(acl);
- REISERFS_I(inode)->i_acl_default = NULL;
-}
-#else
-#define reiserfs_clear_inode NULL
-#endif
-
#ifdef CONFIG_QUOTA
static ssize_t reiserfs_quota_write(struct super_block *, int, const char *,
size_t, loff_t);
@@ -612,7 +589,6 @@
.write_inode = reiserfs_write_inode,
.dirty_inode = reiserfs_dirty_inode,
.delete_inode = reiserfs_delete_inode,
- .clear_inode = reiserfs_clear_inode,
.put_super = reiserfs_put_super,
.write_super = reiserfs_write_super,
.sync_fs = reiserfs_sync_fs,
diff --git a/fs/reiserfs/xattr_acl.c b/fs/reiserfs/xattr_acl.c
index c303c42..35d6e67 100644
--- a/fs/reiserfs/xattr_acl.c
+++ b/fs/reiserfs/xattr_acl.c
@@ -188,29 +188,6 @@
return ERR_PTR(-EINVAL);
}
-static inline void iset_acl(struct inode *inode, struct posix_acl **i_acl,
- struct posix_acl *acl)
-{
- spin_lock(&inode->i_lock);
- if (*i_acl != ERR_PTR(-ENODATA))
- posix_acl_release(*i_acl);
- *i_acl = posix_acl_dup(acl);
- spin_unlock(&inode->i_lock);
-}
-
-static inline struct posix_acl *iget_acl(struct inode *inode,
- struct posix_acl **i_acl)
-{
- struct posix_acl *acl = ERR_PTR(-ENODATA);
-
- spin_lock(&inode->i_lock);
- if (*i_acl != ERR_PTR(-ENODATA))
- acl = posix_acl_dup(*i_acl);
- spin_unlock(&inode->i_lock);
-
- return acl;
-}
-
/*
* Inode operation get_posix_acl().
*
@@ -220,34 +197,29 @@
struct posix_acl *reiserfs_get_acl(struct inode *inode, int type)
{
char *name, *value;
- struct posix_acl *acl, **p_acl;
+ struct posix_acl *acl;
int size;
int retval;
- struct reiserfs_inode_info *reiserfs_i = REISERFS_I(inode);
+
+ acl = get_cached_acl(inode, type);
+ if (acl != ACL_NOT_CACHED)
+ return acl;
switch (type) {
case ACL_TYPE_ACCESS:
name = POSIX_ACL_XATTR_ACCESS;
- p_acl = &reiserfs_i->i_acl_access;
break;
case ACL_TYPE_DEFAULT:
name = POSIX_ACL_XATTR_DEFAULT;
- p_acl = &reiserfs_i->i_acl_default;
break;
default:
- return ERR_PTR(-EINVAL);
+ BUG();
}
- acl = iget_acl(inode, p_acl);
- if (acl && !IS_ERR(acl))
- return acl;
- else if (PTR_ERR(acl) == -ENODATA)
- return NULL;
-
size = reiserfs_xattr_get(inode, name, NULL, 0);
if (size < 0) {
if (size == -ENODATA || size == -ENOSYS) {
- *p_acl = ERR_PTR(-ENODATA);
+ set_cached_acl(inode, type, NULL);
return NULL;
}
return ERR_PTR(size);
@@ -262,14 +234,13 @@
/* This shouldn't actually happen as it should have
been caught above.. but just in case */
acl = NULL;
- *p_acl = ERR_PTR(-ENODATA);
} else if (retval < 0) {
acl = ERR_PTR(retval);
} else {
acl = posix_acl_from_disk(value, retval);
- if (!IS_ERR(acl))
- iset_acl(inode, p_acl, acl);
}
+ if (!IS_ERR(acl))
+ set_cached_acl(inode, type, acl);
kfree(value);
return acl;
@@ -287,10 +258,8 @@
{
char *name;
void *value = NULL;
- struct posix_acl **p_acl;
size_t size = 0;
int error;
- struct reiserfs_inode_info *reiserfs_i = REISERFS_I(inode);
if (S_ISLNK(inode->i_mode))
return -EOPNOTSUPP;
@@ -298,7 +267,6 @@
switch (type) {
case ACL_TYPE_ACCESS:
name = POSIX_ACL_XATTR_ACCESS;
- p_acl = &reiserfs_i->i_acl_access;
if (acl) {
mode_t mode = inode->i_mode;
error = posix_acl_equiv_mode(acl, &mode);
@@ -313,7 +281,6 @@
break;
case ACL_TYPE_DEFAULT:
name = POSIX_ACL_XATTR_DEFAULT;
- p_acl = &reiserfs_i->i_acl_default;
if (!S_ISDIR(inode->i_mode))
return acl ? -EACCES : 0;
break;
@@ -346,7 +313,7 @@
kfree(value);
if (!error)
- iset_acl(inode, p_acl, acl);
+ set_cached_acl(inode, type, acl);
return error;
}
@@ -379,11 +346,8 @@
}
acl = reiserfs_get_acl(dir, ACL_TYPE_DEFAULT);
- if (IS_ERR(acl)) {
- if (PTR_ERR(acl) == -ENODATA)
- goto apply_umask;
+ if (IS_ERR(acl))
return PTR_ERR(acl);
- }
if (acl) {
struct posix_acl *acl_copy;
diff --git a/fs/super.c b/fs/super.c
index d40d53a..2761d3e 100644
--- a/fs/super.c
+++ b/fs/super.c
@@ -608,6 +608,7 @@
static DEFINE_IDA(unnamed_dev_ida);
static DEFINE_SPINLOCK(unnamed_dev_lock);/* protects the above */
+static int unnamed_dev_start = 0; /* don't bother trying below it */
int set_anon_super(struct super_block *s, void *data)
{
@@ -618,7 +619,9 @@
if (ida_pre_get(&unnamed_dev_ida, GFP_ATOMIC) == 0)
return -ENOMEM;
spin_lock(&unnamed_dev_lock);
- error = ida_get_new(&unnamed_dev_ida, &dev);
+ error = ida_get_new_above(&unnamed_dev_ida, unnamed_dev_start, &dev);
+ if (!error)
+ unnamed_dev_start = dev + 1;
spin_unlock(&unnamed_dev_lock);
if (error == -EAGAIN)
/* We raced and lost with another CPU. */
@@ -629,6 +632,8 @@
if ((dev & MAX_ID_MASK) == (1 << MINORBITS)) {
spin_lock(&unnamed_dev_lock);
ida_remove(&unnamed_dev_ida, dev);
+ if (unnamed_dev_start > dev)
+ unnamed_dev_start = dev;
spin_unlock(&unnamed_dev_lock);
return -EMFILE;
}
@@ -645,6 +650,8 @@
generic_shutdown_super(sb);
spin_lock(&unnamed_dev_lock);
ida_remove(&unnamed_dev_ida, slot);
+ if (slot < unnamed_dev_start)
+ unnamed_dev_start = slot;
spin_unlock(&unnamed_dev_lock);
}
diff --git a/fs/ubifs/xattr.c b/fs/ubifs/xattr.c
index cfd31e2..adafcf5 100644
--- a/fs/ubifs/xattr.c
+++ b/fs/ubifs/xattr.c
@@ -55,9 +55,9 @@
* ACL support is not implemented.
*/
+#include "ubifs.h"
#include <linux/xattr.h>
#include <linux/posix_acl_xattr.h>
-#include "ubifs.h"
/*
* Limit the number of extended attributes per inode so that the total size
diff --git a/fs/udf/balloc.c b/fs/udf/balloc.c
index e48e9a3..1e06853 100644
--- a/fs/udf/balloc.c
+++ b/fs/udf/balloc.c
@@ -238,7 +238,7 @@
mutex_lock(&sbi->s_alloc_mutex);
part_len = sbi->s_partmaps[partition].s_partition_len;
- if (first_block < 0 || first_block >= part_len)
+ if (first_block >= part_len)
goto out;
if (first_block + block_count > part_len)
@@ -297,7 +297,7 @@
mutex_lock(&sbi->s_alloc_mutex);
repeat:
- if (goal < 0 || goal >= sbi->s_partmaps[partition].s_partition_len)
+ if (goal >= sbi->s_partmaps[partition].s_partition_len)
goal = 0;
nr_groups = bitmap->s_nr_groups;
@@ -666,8 +666,7 @@
int8_t etype = -1;
struct udf_inode_info *iinfo;
- if (first_block < 0 ||
- first_block >= sbi->s_partmaps[partition].s_partition_len)
+ if (first_block >= sbi->s_partmaps[partition].s_partition_len)
return 0;
iinfo = UDF_I(table);
@@ -743,7 +742,7 @@
return newblock;
mutex_lock(&sbi->s_alloc_mutex);
- if (goal < 0 || goal >= sbi->s_partmaps[partition].s_partition_len)
+ if (goal >= sbi->s_partmaps[partition].s_partition_len)
goal = 0;
/* We search for the closest matching block to goal. If we find
diff --git a/fs/udf/lowlevel.c b/fs/udf/lowlevel.c
index 703843f..1b88fd5 100644
--- a/fs/udf/lowlevel.c
+++ b/fs/udf/lowlevel.c
@@ -56,7 +56,12 @@
struct block_device *bdev = sb->s_bdev;
unsigned long lblock = 0;
- if (ioctl_by_bdev(bdev, CDROM_LAST_WRITTEN, (unsigned long) &lblock))
+ /*
+ * ioctl failed or returned obviously bogus value?
+ * Try using the device size...
+ */
+ if (ioctl_by_bdev(bdev, CDROM_LAST_WRITTEN, (unsigned long) &lblock) ||
+ lblock == 0)
lblock = bdev->bd_inode->i_size >> sb->s_blocksize_bits;
if (lblock)
diff --git a/fs/xfs/linux-2.6/xfs_acl.c b/fs/xfs/linux-2.6/xfs_acl.c
index 1e9d124..b23a545 100644
--- a/fs/xfs/linux-2.6/xfs_acl.c
+++ b/fs/xfs/linux-2.6/xfs_acl.c
@@ -25,14 +25,10 @@
#include <linux/posix_acl_xattr.h>
-#define XFS_ACL_NOT_CACHED ((void *)-1)
-
/*
* Locking scheme:
* - all ACL updates are protected by inode->i_mutex, which is taken before
* calling into this file.
- * - access and updates to the ip->i_acl and ip->i_default_acl pointers are
- * protected by inode->i_lock.
*/
STATIC struct posix_acl *
@@ -102,59 +98,35 @@
}
}
-/*
- * Update the cached ACL pointer in the inode.
- *
- * Because we don't hold any locks while reading/writing the attribute
- * from/to disk another thread could have raced and updated the cached
- * ACL value before us. In that case we release the previous cached value
- * and update it with our new value.
- */
-STATIC void
-xfs_update_cached_acl(struct inode *inode, struct posix_acl **p_acl,
- struct posix_acl *acl)
-{
- spin_lock(&inode->i_lock);
- if (*p_acl && *p_acl != XFS_ACL_NOT_CACHED)
- posix_acl_release(*p_acl);
- *p_acl = posix_acl_dup(acl);
- spin_unlock(&inode->i_lock);
-}
-
struct posix_acl *
xfs_get_acl(struct inode *inode, int type)
{
struct xfs_inode *ip = XFS_I(inode);
- struct posix_acl *acl = NULL, **p_acl;
+ struct posix_acl *acl;
struct xfs_acl *xfs_acl;
int len = sizeof(struct xfs_acl);
char *ea_name;
int error;
+ acl = get_cached_acl(inode, type);
+ if (acl != ACL_NOT_CACHED)
+ return acl;
+
switch (type) {
case ACL_TYPE_ACCESS:
ea_name = SGI_ACL_FILE;
- p_acl = &ip->i_acl;
break;
case ACL_TYPE_DEFAULT:
ea_name = SGI_ACL_DEFAULT;
- p_acl = &ip->i_default_acl;
break;
default:
- return ERR_PTR(-EINVAL);
+ BUG();
}
- spin_lock(&inode->i_lock);
- if (*p_acl != XFS_ACL_NOT_CACHED)
- acl = posix_acl_dup(*p_acl);
- spin_unlock(&inode->i_lock);
-
/*
* If we have a cached ACLs value just return it, not need to
* go out to the disk.
*/
- if (acl)
- return acl;
xfs_acl = kzalloc(sizeof(struct xfs_acl), GFP_KERNEL);
if (!xfs_acl)
@@ -165,7 +137,7 @@
/*
* If the attribute doesn't exist make sure we have a negative
* cache entry, for any other error assume it is transient and
- * leave the cache entry as XFS_ACL_NOT_CACHED.
+ * leave the cache entry as ACL_NOT_CACHED.
*/
if (error == -ENOATTR) {
acl = NULL;
@@ -179,7 +151,7 @@
goto out;
out_update_cache:
- xfs_update_cached_acl(inode, p_acl, acl);
+ set_cached_acl(inode, type, acl);
out:
kfree(xfs_acl);
return acl;
@@ -189,7 +161,6 @@
xfs_set_acl(struct inode *inode, int type, struct posix_acl *acl)
{
struct xfs_inode *ip = XFS_I(inode);
- struct posix_acl **p_acl;
char *ea_name;
int error;
@@ -199,13 +170,11 @@
switch (type) {
case ACL_TYPE_ACCESS:
ea_name = SGI_ACL_FILE;
- p_acl = &ip->i_acl;
break;
case ACL_TYPE_DEFAULT:
if (!S_ISDIR(inode->i_mode))
return acl ? -EACCES : 0;
ea_name = SGI_ACL_DEFAULT;
- p_acl = &ip->i_default_acl;
break;
default:
return -EINVAL;
@@ -242,7 +211,7 @@
}
if (!error)
- xfs_update_cached_acl(inode, p_acl, acl);
+ set_cached_acl(inode, type, acl);
return error;
}
@@ -384,30 +353,6 @@
return error;
}
-void
-xfs_inode_init_acls(struct xfs_inode *ip)
-{
- /*
- * No need for locking, inode is not live yet.
- */
- ip->i_acl = XFS_ACL_NOT_CACHED;
- ip->i_default_acl = XFS_ACL_NOT_CACHED;
-}
-
-void
-xfs_inode_clear_acls(struct xfs_inode *ip)
-{
- /*
- * No need for locking here, the inode is not live anymore
- * and just about to be freed.
- */
- if (ip->i_acl != XFS_ACL_NOT_CACHED)
- posix_acl_release(ip->i_acl);
- if (ip->i_default_acl != XFS_ACL_NOT_CACHED)
- posix_acl_release(ip->i_default_acl);
-}
-
-
/*
* System xattr handlers.
*
diff --git a/fs/xfs/xfs_acl.h b/fs/xfs/xfs_acl.h
index 63dc1f2..947b150 100644
--- a/fs/xfs/xfs_acl.h
+++ b/fs/xfs/xfs_acl.h
@@ -46,8 +46,6 @@
extern struct posix_acl *xfs_get_acl(struct inode *inode, int type);
extern int xfs_inherit_acl(struct inode *inode, struct posix_acl *default_acl);
extern int xfs_acl_chmod(struct inode *inode);
-extern void xfs_inode_init_acls(struct xfs_inode *ip);
-extern void xfs_inode_clear_acls(struct xfs_inode *ip);
extern int posix_acl_access_exists(struct inode *inode);
extern int posix_acl_default_exists(struct inode *inode);
@@ -57,8 +55,6 @@
# define xfs_get_acl(inode, type) NULL
# define xfs_inherit_acl(inode, default_acl) 0
# define xfs_acl_chmod(inode) 0
-# define xfs_inode_init_acls(ip)
-# define xfs_inode_clear_acls(ip)
# define posix_acl_access_exists(inode) 0
# define posix_acl_default_exists(inode) 0
#endif /* CONFIG_XFS_POSIX_ACL */
diff --git a/fs/xfs/xfs_iget.c b/fs/xfs/xfs_iget.c
index 76c540f..5fcec6f 100644
--- a/fs/xfs/xfs_iget.c
+++ b/fs/xfs/xfs_iget.c
@@ -83,7 +83,6 @@
memset(&ip->i_d, 0, sizeof(xfs_icdinode_t));
ip->i_size = 0;
ip->i_new_size = 0;
- xfs_inode_init_acls(ip);
/*
* Initialize inode's trace buffers.
@@ -560,7 +559,6 @@
ASSERT(atomic_read(&ip->i_pincount) == 0);
ASSERT(!spin_is_locked(&ip->i_flags_lock));
ASSERT(completion_done(&ip->i_flush));
- xfs_inode_clear_acls(ip);
kmem_zone_free(xfs_inode_zone, ip);
}
diff --git a/fs/xfs/xfs_inode.h b/fs/xfs/xfs_inode.h
index 7701670..1804f86 100644
--- a/fs/xfs/xfs_inode.h
+++ b/fs/xfs/xfs_inode.h
@@ -273,11 +273,6 @@
/* VFS inode */
struct inode i_vnode; /* embedded VFS inode */
-#ifdef CONFIG_XFS_POSIX_ACL
- struct posix_acl *i_acl;
- struct posix_acl *i_default_acl;
-#endif
-
/* Trace buffers per inode. */
#ifdef XFS_INODE_TRACE
struct ktrace *i_trace; /* general inode trace */
diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h
index c34b110..c65e4ce 100644
--- a/include/acpi/acpi_bus.h
+++ b/include/acpi/acpi_bus.h
@@ -114,10 +114,13 @@
acpi_op_notify notify;
};
+#define ACPI_DRIVER_ALL_NOTIFY_EVENTS 0x1 /* system AND device events */
+
struct acpi_driver {
char name[80];
char class[80];
const struct acpi_device_id *ids; /* Supported Hardware IDs */
+ unsigned int flags;
struct acpi_device_ops ops;
struct device_driver drv;
struct module *owner;
@@ -168,7 +171,7 @@
/* Plug and Play */
-typedef char acpi_bus_id[5];
+typedef char acpi_bus_id[8];
typedef unsigned long acpi_bus_address;
typedef char acpi_hardware_id[15];
typedef char acpi_unique_id[9];
@@ -365,10 +368,10 @@
int register_acpi_bus_type(struct acpi_bus_type *);
int unregister_acpi_bus_type(struct acpi_bus_type *);
struct device *acpi_get_physical_device(acpi_handle);
-struct device *acpi_get_physical_pci_device(acpi_handle);
/* helper */
acpi_handle acpi_get_child(acpi_handle, acpi_integer);
+int acpi_is_root_bridge(acpi_handle);
acpi_handle acpi_get_pci_rootbridge_handle(unsigned int, unsigned int);
#define DEVICE_ACPI_HANDLE(dev) ((acpi_handle)((dev)->archdata.acpi_handle))
diff --git a/include/acpi/acpi_drivers.h b/include/acpi/acpi_drivers.h
index 0352c8f..f4906f6 100644
--- a/include/acpi/acpi_drivers.h
+++ b/include/acpi/acpi_drivers.h
@@ -57,8 +57,7 @@
*/
#define ACPI_POWER_HID "LNXPOWER"
-#define ACPI_PROCESSOR_OBJECT_HID "ACPI_CPU"
-#define ACPI_PROCESSOR_HID "ACPI0007"
+#define ACPI_PROCESSOR_OBJECT_HID "LNXCPU"
#define ACPI_SYSTEM_HID "LNXSYSTM"
#define ACPI_THERMAL_HID "LNXTHERM"
#define ACPI_BUTTON_HID_POWERF "LNXPWRBN"
@@ -91,17 +90,15 @@
/* ACPI PCI Interrupt Routing (pci_irq.c) */
-int acpi_pci_irq_add_prt(acpi_handle handle, int segment, int bus);
-void acpi_pci_irq_del_prt(int segment, int bus);
+int acpi_pci_irq_add_prt(acpi_handle handle, struct pci_bus *bus);
+void acpi_pci_irq_del_prt(struct pci_bus *bus);
/* ACPI PCI Device Binding (pci_bind.c) */
struct pci_bus;
-acpi_status acpi_get_pci_id(acpi_handle handle, struct acpi_pci_id *id);
-int acpi_pci_bind(struct acpi_device *device);
-int acpi_pci_bind_root(struct acpi_device *device, struct acpi_pci_id *id,
- struct pci_bus *bus);
+struct pci_dev *acpi_get_pci_dev(acpi_handle);
+int acpi_pci_bind_root(struct acpi_device *device);
/* Arch-defined function to add a bus to the system */
diff --git a/include/acpi/processor.h b/include/acpi/processor.h
index 4927c06..baf1e0a 100644
--- a/include/acpi/processor.h
+++ b/include/acpi/processor.h
@@ -258,6 +258,7 @@
extern struct acpi_processor_errata errata;
void arch_acpi_processor_init_pdc(struct acpi_processor *pr);
+void arch_acpi_processor_cleanup_pdc(struct acpi_processor *pr);
#ifdef ARCH_HAS_POWER_INIT
void acpi_processor_power_init_bm_check(struct acpi_processor_flags *flags,
diff --git a/include/acpi/video.h b/include/acpi/video.h
index af6fe95..cf7be3d 100644
--- a/include/acpi/video.h
+++ b/include/acpi/video.h
@@ -3,10 +3,10 @@
#if (defined CONFIG_ACPI_VIDEO || defined CONFIG_ACPI_VIDEO_MODULE)
extern int acpi_video_register(void);
-extern int acpi_video_exit(void);
+extern void acpi_video_unregister(void);
#else
static inline int acpi_video_register(void) { return 0; }
-static inline void acpi_video_exit(void) { return; }
+static inline void acpi_video_unregister(void) { return; }
#endif
#endif
diff --git a/include/asm-generic/hardirq.h b/include/asm-generic/hardirq.h
index 3d5d2c9..23bb4da 100644
--- a/include/asm-generic/hardirq.h
+++ b/include/asm-generic/hardirq.h
@@ -11,19 +11,6 @@
#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */
-#ifndef HARDIRQ_BITS
-#define HARDIRQ_BITS 8
-#endif
-
-/*
- * The hardirq mask has to be large enough to have
- * space for potentially all IRQ sources in the system
- * nesting on a single CPU:
- */
-#if (1 << HARDIRQ_BITS) < NR_IRQS
-# error HARDIRQ_BITS is too low!
-#endif
-
#ifndef ack_bad_irq
static inline void ack_bad_irq(unsigned int irq)
{
diff --git a/include/asm-generic/pgtable.h b/include/asm-generic/pgtable.h
index e410f60..e2bd73e 100644
--- a/include/asm-generic/pgtable.h
+++ b/include/asm-generic/pgtable.h
@@ -129,6 +129,10 @@
#define move_pte(pte, prot, old_addr, new_addr) (pte)
#endif
+#ifndef pgprot_noncached
+#define pgprot_noncached(prot) (prot)
+#endif
+
#ifndef pgprot_writecombine
#define pgprot_writecombine pgprot_noncached
#endif
diff --git a/include/asm-generic/uaccess.h b/include/asm-generic/uaccess.h
index 6d8cab2..b218b85 100644
--- a/include/asm-generic/uaccess.h
+++ b/include/asm-generic/uaccess.h
@@ -163,7 +163,7 @@
#define put_user(x, ptr) \
({ \
might_sleep(); \
- __access_ok(ptr, sizeof (*ptr)) ? \
+ access_ok(VERIFY_WRITE, ptr, sizeof(*ptr)) ? \
__put_user(x, ptr) : \
-EFAULT; \
})
@@ -219,7 +219,7 @@
#define get_user(x, ptr) \
({ \
might_sleep(); \
- __access_ok(ptr, sizeof (*ptr)) ? \
+ access_ok(VERIFY_READ, ptr, sizeof(*ptr)) ? \
__get_user(x, ptr) : \
-EFAULT; \
})
@@ -244,7 +244,7 @@
const void __user * from, unsigned long n)
{
might_sleep();
- if (__access_ok(from, n))
+ if (access_ok(VERIFY_READ, from, n))
return __copy_from_user(to, from, n);
else
return n;
@@ -254,7 +254,7 @@
const void *from, unsigned long n)
{
might_sleep();
- if (__access_ok(to, n))
+ if (access_ok(VERIFY_WRITE, to, n))
return __copy_to_user(to, from, n);
else
return n;
@@ -278,7 +278,7 @@
static inline long
strncpy_from_user(char *dst, const char __user *src, long count)
{
- if (!__access_ok(src, 1))
+ if (!access_ok(VERIFY_READ, src, 1))
return -EFAULT;
return __strncpy_from_user(dst, src, count);
}
@@ -291,6 +291,8 @@
#ifndef strnlen_user
static inline long strnlen_user(const char __user *src, long n)
{
+ if (!access_ok(VERIFY_READ, src, 1))
+ return 0;
return strlen((void * __force)src) + 1;
}
#endif
@@ -316,7 +318,7 @@
clear_user(void __user *to, unsigned long n)
{
might_sleep();
- if (!__access_ok(to, n))
+ if (!access_ok(VERIFY_WRITE, to, n))
return n;
return __clear_user(to, n);
diff --git a/include/asm-generic/unistd.h b/include/asm-generic/unistd.h
index 5b34b62..1125e5a 100644
--- a/include/asm-generic/unistd.h
+++ b/include/asm-generic/unistd.h
@@ -618,8 +618,13 @@
__SYSCALL(__NR_move_pages, sys_move_pages)
#endif
+#define __NR_rt_tgsigqueueinfo 240
+__SYSCALL(__NR_rt_tgsigqueueinfo, sys_rt_tgsigqueueinfo)
+#define __NR_perf_counter_open 241
+__SYSCALL(__NR_perf_counter_open, sys_perf_counter_open)
+
#undef __NR_syscalls
-#define __NR_syscalls 240
+#define __NR_syscalls 242
/*
* All syscalls below here should go away really,
diff --git a/include/drm/drm_edid.h b/include/drm/drm_edid.h
index c263e4d..7d6c9a2 100644
--- a/include/drm/drm_edid.h
+++ b/include/drm/drm_edid.h
@@ -35,11 +35,11 @@
} __attribute__((packed));
/* 00=16:10, 01=4:3, 10=5:4, 11=16:9 */
-#define EDID_TIMING_ASPECT_SHIFT 0
+#define EDID_TIMING_ASPECT_SHIFT 6
#define EDID_TIMING_ASPECT_MASK (0x3 << EDID_TIMING_ASPECT_SHIFT)
/* need to add 60 */
-#define EDID_TIMING_VFREQ_SHIFT 2
+#define EDID_TIMING_VFREQ_SHIFT 0
#define EDID_TIMING_VFREQ_MASK (0x3f << EDID_TIMING_VFREQ_SHIFT)
struct std_timing {
@@ -47,11 +47,11 @@
u8 vfreq_aspect;
} __attribute__((packed));
-#define DRM_EDID_PT_HSYNC_POSITIVE (1 << 6)
-#define DRM_EDID_PT_VSYNC_POSITIVE (1 << 5)
+#define DRM_EDID_PT_HSYNC_POSITIVE (1 << 1)
+#define DRM_EDID_PT_VSYNC_POSITIVE (1 << 2)
#define DRM_EDID_PT_SEPARATE_SYNC (3 << 3)
-#define DRM_EDID_PT_STEREO (1 << 2)
-#define DRM_EDID_PT_INTERLACED (1 << 1)
+#define DRM_EDID_PT_STEREO (1 << 5)
+#define DRM_EDID_PT_INTERLACED (1 << 7)
/* If detailed data is pixel timing */
struct detailed_pixel_timing {
@@ -93,7 +93,7 @@
} __attribute__((packed));
struct detailed_data_wpindex {
- u8 white_xy_lo; /* Upper 2 bits each */
+ u8 white_yx_lo; /* Lower 2 bits each */
u8 white_x_hi;
u8 white_y_hi;
u8 gamma; /* need to divide by 100 then add 1 */
@@ -135,21 +135,21 @@
} data;
} __attribute__((packed));
-#define DRM_EDID_INPUT_SERRATION_VSYNC (1 << 7)
-#define DRM_EDID_INPUT_SYNC_ON_GREEN (1 << 5)
-#define DRM_EDID_INPUT_COMPOSITE_SYNC (1 << 4)
+#define DRM_EDID_INPUT_SERRATION_VSYNC (1 << 0)
+#define DRM_EDID_INPUT_SYNC_ON_GREEN (1 << 1)
+#define DRM_EDID_INPUT_COMPOSITE_SYNC (1 << 2)
#define DRM_EDID_INPUT_SEPARATE_SYNCS (1 << 3)
-#define DRM_EDID_INPUT_BLANK_TO_BLACK (1 << 2)
-#define DRM_EDID_INPUT_VIDEO_LEVEL (3 << 1)
-#define DRM_EDID_INPUT_DIGITAL (1 << 0) /* bits above must be zero if set */
+#define DRM_EDID_INPUT_BLANK_TO_BLACK (1 << 4)
+#define DRM_EDID_INPUT_VIDEO_LEVEL (3 << 5)
+#define DRM_EDID_INPUT_DIGITAL (1 << 7) /* bits below must be zero if set */
-#define DRM_EDID_FEATURE_DEFAULT_GTF (1 << 7)
-#define DRM_EDID_FEATURE_PREFERRED_TIMING (1 << 6)
-#define DRM_EDID_FEATURE_STANDARD_COLOR (1 << 5)
+#define DRM_EDID_FEATURE_DEFAULT_GTF (1 << 0)
+#define DRM_EDID_FEATURE_PREFERRED_TIMING (1 << 1)
+#define DRM_EDID_FEATURE_STANDARD_COLOR (1 << 2)
#define DRM_EDID_FEATURE_DISPLAY_TYPE (3 << 3) /* 00=mono, 01=rgb, 10=non-rgb, 11=unknown */
-#define DRM_EDID_FEATURE_PM_ACTIVE_OFF (1 << 2)
-#define DRM_EDID_FEATURE_PM_SUSPEND (1 << 1)
-#define DRM_EDID_FEATURE_PM_STANDBY (1 << 0)
+#define DRM_EDID_FEATURE_PM_ACTIVE_OFF (1 << 5)
+#define DRM_EDID_FEATURE_PM_SUSPEND (1 << 6)
+#define DRM_EDID_FEATURE_PM_STANDBY (1 << 7)
struct edid {
u8 header[8];
diff --git a/include/linux/Kbuild b/include/linux/Kbuild
index 03f2207..334a359 100644
--- a/include/linux/Kbuild
+++ b/include/linux/Kbuild
@@ -57,6 +57,7 @@
header-y += dlm_device.h
header-y += dlm_netlink.h
header-y += dm-ioctl.h
+header-y += dm-log-userspace.h
header-y += dn.h
header-y += dqblk_xfs.h
header-y += efs_fs_sb.h
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index 51b4b0a..34321cf 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -113,9 +113,6 @@
extern u32 acpi_irq_handled;
extern u32 acpi_irq_not_handled;
-extern struct acpi_mcfg_allocation *pci_mmcfg_config;
-extern int pci_mmcfg_config_num;
-
extern int sbf_port;
extern unsigned long acpi_realmode_flags;
@@ -293,7 +290,10 @@
OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL)
extern acpi_status acpi_pci_osc_control_set(acpi_handle handle, u32 flags);
+extern void acpi_early_init(void);
+
#else /* CONFIG_ACPI */
+static inline void acpi_early_init(void) { }
static inline int early_acpi_boot_init(void)
{
diff --git a/include/linux/audit.h b/include/linux/audit.h
index 4fa2810b..3c7a358 100644
--- a/include/linux/audit.h
+++ b/include/linux/audit.h
@@ -599,6 +599,8 @@
extern void audit_log_d_path(struct audit_buffer *ab,
const char *prefix,
struct path *path);
+extern void audit_log_key(struct audit_buffer *ab,
+ char *key);
extern void audit_log_lost(const char *message);
extern int audit_update_lsm_rules(void);
@@ -621,6 +623,7 @@
#define audit_log_n_untrustedstring(a,n,s) do { ; } while (0)
#define audit_log_untrustedstring(a,s) do { ; } while (0)
#define audit_log_d_path(b, p, d) do { ; } while (0)
+#define audit_log_key(b, k) do { ; } while (0)
#define audit_enabled 0
#endif
#endif
diff --git a/include/linux/connector.h b/include/linux/connector.h
index b9966e6..b68d278 100644
--- a/include/linux/connector.h
+++ b/include/linux/connector.h
@@ -41,8 +41,10 @@
#define CN_IDX_BB 0x5 /* BlackBoard, from the TSP GPL sampling framework */
#define CN_DST_IDX 0x6
#define CN_DST_VAL 0x1
+#define CN_IDX_DM 0x7 /* Device Mapper */
+#define CN_VAL_DM_USERSPACE_LOG 0x1
-#define CN_NETLINK_USERS 7
+#define CN_NETLINK_USERS 8
/*
* Maximum connector's message size.
diff --git a/include/linux/device-mapper.h b/include/linux/device-mapper.h
index 49c2362..0d63106 100644
--- a/include/linux/device-mapper.h
+++ b/include/linux/device-mapper.h
@@ -11,6 +11,7 @@
#include <linux/bio.h>
#include <linux/blkdev.h>
+struct dm_dev;
struct dm_target;
struct dm_table;
struct mapped_device;
@@ -21,6 +22,7 @@
union map_info {
void *ptr;
unsigned long long ll;
+ unsigned flush_request;
};
/*
@@ -80,6 +82,15 @@
typedef int (*dm_merge_fn) (struct dm_target *ti, struct bvec_merge_data *bvm,
struct bio_vec *biovec, int max_size);
+typedef int (*iterate_devices_callout_fn) (struct dm_target *ti,
+ struct dm_dev *dev,
+ sector_t physical_start,
+ void *data);
+
+typedef int (*dm_iterate_devices_fn) (struct dm_target *ti,
+ iterate_devices_callout_fn fn,
+ void *data);
+
/*
* Returns:
* 0: The target can handle the next I/O immediately.
@@ -92,7 +103,8 @@
/*
* Combine device limits.
*/
-void dm_set_device_limits(struct dm_target *ti, struct block_device *bdev);
+int dm_set_device_limits(struct dm_target *ti, struct dm_dev *dev,
+ sector_t start, void *data);
struct dm_dev {
struct block_device *bdev;
@@ -138,23 +150,12 @@
dm_ioctl_fn ioctl;
dm_merge_fn merge;
dm_busy_fn busy;
+ dm_iterate_devices_fn iterate_devices;
/* For internal device-mapper use. */
struct list_head list;
};
-struct io_restrictions {
- unsigned long bounce_pfn;
- unsigned long seg_boundary_mask;
- unsigned max_hw_sectors;
- unsigned max_sectors;
- unsigned max_segment_size;
- unsigned short logical_block_size;
- unsigned short max_hw_segments;
- unsigned short max_phys_segments;
- unsigned char no_cluster; /* inverted so that 0 is default */
-};
-
struct dm_target {
struct dm_table *table;
struct target_type *type;
@@ -163,15 +164,18 @@
sector_t begin;
sector_t len;
- /* FIXME: turn this into a mask, and merge with io_restrictions */
/* Always a power of 2 */
sector_t split_io;
/*
- * These are automatically filled in by
- * dm_table_get_device.
+ * A number of zero-length barrier requests that will be submitted
+ * to the target for the purpose of flushing cache.
+ *
+ * The request number will be placed in union map_info->flush_request.
+ * It is a responsibility of the target driver to remap these requests
+ * to the real underlying devices.
*/
- struct io_restrictions limits;
+ unsigned num_flush_requests;
/* target specific data */
void *private;
@@ -230,6 +234,7 @@
int dm_suspended(struct mapped_device *md);
int dm_noflush_suspending(struct dm_target *ti);
union map_info *dm_get_mapinfo(struct bio *bio);
+union map_info *dm_get_rq_mapinfo(struct request *rq);
/*
* Geometry functions.
@@ -392,4 +397,12 @@
return (n << SECTOR_SHIFT);
}
+/*-----------------------------------------------------------------
+ * Helper for block layer and dm core operations
+ *---------------------------------------------------------------*/
+void dm_dispatch_request(struct request *rq);
+void dm_requeue_unmapped_request(struct request *rq);
+void dm_kill_unmapped_request(struct request *rq, int error);
+int dm_underlying_device_busy(struct request_queue *q);
+
#endif /* _LINUX_DEVICE_MAPPER_H */
diff --git a/include/linux/dm-ioctl.h b/include/linux/dm-ioctl.h
index 48e44ee..2ab84c8 100644
--- a/include/linux/dm-ioctl.h
+++ b/include/linux/dm-ioctl.h
@@ -123,6 +123,16 @@
__u32 target_count; /* in/out */
__s32 open_count; /* out */
__u32 flags; /* in/out */
+
+ /*
+ * event_nr holds either the event number (input and output) or the
+ * udev cookie value (input only).
+ * The DM_DEV_WAIT ioctl takes an event number as input.
+ * The DM_SUSPEND, DM_DEV_REMOVE and DM_DEV_RENAME ioctls
+ * use the field as a cookie to return in the DM_COOKIE
+ * variable with the uevents they issue.
+ * For output, the ioctls return the event number, not the cookie.
+ */
__u32 event_nr; /* in/out */
__u32 padding;
@@ -256,9 +266,9 @@
#define DM_DEV_SET_GEOMETRY _IOWR(DM_IOCTL, DM_DEV_SET_GEOMETRY_CMD, struct dm_ioctl)
#define DM_VERSION_MAJOR 4
-#define DM_VERSION_MINOR 14
+#define DM_VERSION_MINOR 15
#define DM_VERSION_PATCHLEVEL 0
-#define DM_VERSION_EXTRA "-ioctl (2008-04-23)"
+#define DM_VERSION_EXTRA "-ioctl (2009-04-01)"
/* Status bits */
#define DM_READONLY_FLAG (1 << 0) /* In/Out */
diff --git a/include/linux/dm-log-userspace.h b/include/linux/dm-log-userspace.h
new file mode 100644
index 0000000..642e301
--- /dev/null
+++ b/include/linux/dm-log-userspace.h
@@ -0,0 +1,386 @@
+/*
+ * Copyright (C) 2006-2009 Red Hat, Inc.
+ *
+ * This file is released under the LGPL.
+ */
+
+#ifndef __DM_LOG_USERSPACE_H__
+#define __DM_LOG_USERSPACE_H__
+
+#include <linux/dm-ioctl.h> /* For DM_UUID_LEN */
+
+/*
+ * The device-mapper userspace log module consists of a kernel component and
+ * a user-space component. The kernel component implements the API defined
+ * in dm-dirty-log.h. Its purpose is simply to pass the parameters and
+ * return values of those API functions between kernel and user-space.
+ *
+ * Below are defined the 'request_types' - DM_ULOG_CTR, DM_ULOG_DTR, etc.
+ * These request types represent the different functions in the device-mapper
+ * dirty log API. Each of these is described in more detail below.
+ *
+ * The user-space program must listen for requests from the kernel (representing
+ * the various API functions) and process them.
+ *
+ * User-space begins by setting up the communication link (error checking
+ * removed for clarity):
+ * fd = socket(PF_NETLINK, SOCK_DGRAM, NETLINK_CONNECTOR);
+ * addr.nl_family = AF_NETLINK;
+ * addr.nl_groups = CN_IDX_DM;
+ * addr.nl_pid = 0;
+ * r = bind(fd, (struct sockaddr *) &addr, sizeof(addr));
+ * opt = addr.nl_groups;
+ * setsockopt(fd, SOL_NETLINK, NETLINK_ADD_MEMBERSHIP, &opt, sizeof(opt));
+ *
+ * User-space will then wait to receive requests form the kernel, which it
+ * will process as described below. The requests are received in the form,
+ * ((struct dm_ulog_request) + (additional data)). Depending on the request
+ * type, there may or may not be 'additional data'. In the descriptions below,
+ * you will see 'Payload-to-userspace' and 'Payload-to-kernel'. The
+ * 'Payload-to-userspace' is what the kernel sends in 'additional data' as
+ * necessary parameters to complete the request. The 'Payload-to-kernel' is
+ * the 'additional data' returned to the kernel that contains the necessary
+ * results of the request. The 'data_size' field in the dm_ulog_request
+ * structure denotes the availability and amount of payload data.
+ */
+
+/*
+ * DM_ULOG_CTR corresponds to (found in dm-dirty-log.h):
+ * int (*ctr)(struct dm_dirty_log *log, struct dm_target *ti,
+ * unsigned argc, char **argv);
+ *
+ * Payload-to-userspace:
+ * A single string containing all the argv arguments separated by ' 's
+ * Payload-to-kernel:
+ * None. ('data_size' in the dm_ulog_request struct should be 0.)
+ *
+ * The UUID contained in the dm_ulog_request structure is the reference that
+ * will be used by all request types to a specific log. The constructor must
+ * record this assotiation with instance created.
+ *
+ * When the request has been processed, user-space must return the
+ * dm_ulog_request to the kernel - setting the 'error' field and
+ * 'data_size' appropriately.
+ */
+#define DM_ULOG_CTR 1
+
+/*
+ * DM_ULOG_DTR corresponds to (found in dm-dirty-log.h):
+ * void (*dtr)(struct dm_dirty_log *log);
+ *
+ * Payload-to-userspace:
+ * A single string containing all the argv arguments separated by ' 's
+ * Payload-to-kernel:
+ * None. ('data_size' in the dm_ulog_request struct should be 0.)
+ *
+ * The UUID contained in the dm_ulog_request structure is all that is
+ * necessary to identify the log instance being destroyed. There is no
+ * payload data.
+ *
+ * When the request has been processed, user-space must return the
+ * dm_ulog_request to the kernel - setting the 'error' field and clearing
+ * 'data_size' appropriately.
+ */
+#define DM_ULOG_DTR 2
+
+/*
+ * DM_ULOG_PRESUSPEND corresponds to (found in dm-dirty-log.h):
+ * int (*presuspend)(struct dm_dirty_log *log);
+ *
+ * Payload-to-userspace:
+ * None.
+ * Payload-to-kernel:
+ * None.
+ *
+ * The UUID contained in the dm_ulog_request structure is all that is
+ * necessary to identify the log instance being presuspended. There is no
+ * payload data.
+ *
+ * When the request has been processed, user-space must return the
+ * dm_ulog_request to the kernel - setting the 'error' field and
+ * 'data_size' appropriately.
+ */
+#define DM_ULOG_PRESUSPEND 3
+
+/*
+ * DM_ULOG_POSTSUSPEND corresponds to (found in dm-dirty-log.h):
+ * int (*postsuspend)(struct dm_dirty_log *log);
+ *
+ * Payload-to-userspace:
+ * None.
+ * Payload-to-kernel:
+ * None.
+ *
+ * The UUID contained in the dm_ulog_request structure is all that is
+ * necessary to identify the log instance being postsuspended. There is no
+ * payload data.
+ *
+ * When the request has been processed, user-space must return the
+ * dm_ulog_request to the kernel - setting the 'error' field and
+ * 'data_size' appropriately.
+ */
+#define DM_ULOG_POSTSUSPEND 4
+
+/*
+ * DM_ULOG_RESUME corresponds to (found in dm-dirty-log.h):
+ * int (*resume)(struct dm_dirty_log *log);
+ *
+ * Payload-to-userspace:
+ * None.
+ * Payload-to-kernel:
+ * None.
+ *
+ * The UUID contained in the dm_ulog_request structure is all that is
+ * necessary to identify the log instance being resumed. There is no
+ * payload data.
+ *
+ * When the request has been processed, user-space must return the
+ * dm_ulog_request to the kernel - setting the 'error' field and
+ * 'data_size' appropriately.
+ */
+#define DM_ULOG_RESUME 5
+
+/*
+ * DM_ULOG_GET_REGION_SIZE corresponds to (found in dm-dirty-log.h):
+ * uint32_t (*get_region_size)(struct dm_dirty_log *log);
+ *
+ * Payload-to-userspace:
+ * None.
+ * Payload-to-kernel:
+ * uint64_t - contains the region size
+ *
+ * The region size is something that was determined at constructor time.
+ * It is returned in the payload area and 'data_size' is set to
+ * reflect this.
+ *
+ * When the request has been processed, user-space must return the
+ * dm_ulog_request to the kernel - setting the 'error' field appropriately.
+ */
+#define DM_ULOG_GET_REGION_SIZE 6
+
+/*
+ * DM_ULOG_IS_CLEAN corresponds to (found in dm-dirty-log.h):
+ * int (*is_clean)(struct dm_dirty_log *log, region_t region);
+ *
+ * Payload-to-userspace:
+ * uint64_t - the region to get clean status on
+ * Payload-to-kernel:
+ * int64_t - 1 if clean, 0 otherwise
+ *
+ * Payload is sizeof(uint64_t) and contains the region for which the clean
+ * status is being made.
+ *
+ * When the request has been processed, user-space must return the
+ * dm_ulog_request to the kernel - filling the payload with 0 (not clean) or
+ * 1 (clean), setting 'data_size' and 'error' appropriately.
+ */
+#define DM_ULOG_IS_CLEAN 7
+
+/*
+ * DM_ULOG_IN_SYNC corresponds to (found in dm-dirty-log.h):
+ * int (*in_sync)(struct dm_dirty_log *log, region_t region,
+ * int can_block);
+ *
+ * Payload-to-userspace:
+ * uint64_t - the region to get sync status on
+ * Payload-to-kernel:
+ * int64_t - 1 if in-sync, 0 otherwise
+ *
+ * Exactly the same as 'is_clean' above, except this time asking "has the
+ * region been recovered?" vs. "is the region not being modified?"
+ */
+#define DM_ULOG_IN_SYNC 8
+
+/*
+ * DM_ULOG_FLUSH corresponds to (found in dm-dirty-log.h):
+ * int (*flush)(struct dm_dirty_log *log);
+ *
+ * Payload-to-userspace:
+ * None.
+ * Payload-to-kernel:
+ * None.
+ *
+ * No incoming or outgoing payload. Simply flush log state to disk.
+ *
+ * When the request has been processed, user-space must return the
+ * dm_ulog_request to the kernel - setting the 'error' field and clearing
+ * 'data_size' appropriately.
+ */
+#define DM_ULOG_FLUSH 9
+
+/*
+ * DM_ULOG_MARK_REGION corresponds to (found in dm-dirty-log.h):
+ * void (*mark_region)(struct dm_dirty_log *log, region_t region);
+ *
+ * Payload-to-userspace:
+ * uint64_t [] - region(s) to mark
+ * Payload-to-kernel:
+ * None.
+ *
+ * Incoming payload contains the one or more regions to mark dirty.
+ * The number of regions contained in the payload can be determined from
+ * 'data_size/sizeof(uint64_t)'.
+ *
+ * When the request has been processed, user-space must return the
+ * dm_ulog_request to the kernel - setting the 'error' field and clearing
+ * 'data_size' appropriately.
+ */
+#define DM_ULOG_MARK_REGION 10
+
+/*
+ * DM_ULOG_CLEAR_REGION corresponds to (found in dm-dirty-log.h):
+ * void (*clear_region)(struct dm_dirty_log *log, region_t region);
+ *
+ * Payload-to-userspace:
+ * uint64_t [] - region(s) to clear
+ * Payload-to-kernel:
+ * None.
+ *
+ * Incoming payload contains the one or more regions to mark clean.
+ * The number of regions contained in the payload can be determined from
+ * 'data_size/sizeof(uint64_t)'.
+ *
+ * When the request has been processed, user-space must return the
+ * dm_ulog_request to the kernel - setting the 'error' field and clearing
+ * 'data_size' appropriately.
+ */
+#define DM_ULOG_CLEAR_REGION 11
+
+/*
+ * DM_ULOG_GET_RESYNC_WORK corresponds to (found in dm-dirty-log.h):
+ * int (*get_resync_work)(struct dm_dirty_log *log, region_t *region);
+ *
+ * Payload-to-userspace:
+ * None.
+ * Payload-to-kernel:
+ * {
+ * int64_t i; -- 1 if recovery necessary, 0 otherwise
+ * uint64_t r; -- The region to recover if i=1
+ * }
+ * 'data_size' should be set appropriately.
+ *
+ * When the request has been processed, user-space must return the
+ * dm_ulog_request to the kernel - setting the 'error' field appropriately.
+ */
+#define DM_ULOG_GET_RESYNC_WORK 12
+
+/*
+ * DM_ULOG_SET_REGION_SYNC corresponds to (found in dm-dirty-log.h):
+ * void (*set_region_sync)(struct dm_dirty_log *log,
+ * region_t region, int in_sync);
+ *
+ * Payload-to-userspace:
+ * {
+ * uint64_t - region to set sync state on
+ * int64_t - 0 if not-in-sync, 1 if in-sync
+ * }
+ * Payload-to-kernel:
+ * None.
+ *
+ * When the request has been processed, user-space must return the
+ * dm_ulog_request to the kernel - setting the 'error' field and clearing
+ * 'data_size' appropriately.
+ */
+#define DM_ULOG_SET_REGION_SYNC 13
+
+/*
+ * DM_ULOG_GET_SYNC_COUNT corresponds to (found in dm-dirty-log.h):
+ * region_t (*get_sync_count)(struct dm_dirty_log *log);
+ *
+ * Payload-to-userspace:
+ * None.
+ * Payload-to-kernel:
+ * uint64_t - the number of in-sync regions
+ *
+ * No incoming payload. Kernel-bound payload contains the number of
+ * regions that are in-sync (in a size_t).
+ *
+ * When the request has been processed, user-space must return the
+ * dm_ulog_request to the kernel - setting the 'error' field and
+ * 'data_size' appropriately.
+ */
+#define DM_ULOG_GET_SYNC_COUNT 14
+
+/*
+ * DM_ULOG_STATUS_INFO corresponds to (found in dm-dirty-log.h):
+ * int (*status)(struct dm_dirty_log *log, STATUSTYPE_INFO,
+ * char *result, unsigned maxlen);
+ *
+ * Payload-to-userspace:
+ * None.
+ * Payload-to-kernel:
+ * Character string containing STATUSTYPE_INFO
+ *
+ * When the request has been processed, user-space must return the
+ * dm_ulog_request to the kernel - setting the 'error' field and
+ * 'data_size' appropriately.
+ */
+#define DM_ULOG_STATUS_INFO 15
+
+/*
+ * DM_ULOG_STATUS_TABLE corresponds to (found in dm-dirty-log.h):
+ * int (*status)(struct dm_dirty_log *log, STATUSTYPE_TABLE,
+ * char *result, unsigned maxlen);
+ *
+ * Payload-to-userspace:
+ * None.
+ * Payload-to-kernel:
+ * Character string containing STATUSTYPE_TABLE
+ *
+ * When the request has been processed, user-space must return the
+ * dm_ulog_request to the kernel - setting the 'error' field and
+ * 'data_size' appropriately.
+ */
+#define DM_ULOG_STATUS_TABLE 16
+
+/*
+ * DM_ULOG_IS_REMOTE_RECOVERING corresponds to (found in dm-dirty-log.h):
+ * int (*is_remote_recovering)(struct dm_dirty_log *log, region_t region);
+ *
+ * Payload-to-userspace:
+ * uint64_t - region to determine recovery status on
+ * Payload-to-kernel:
+ * {
+ * int64_t is_recovering; -- 0 if no, 1 if yes
+ * uint64_t in_sync_hint; -- lowest region still needing resync
+ * }
+ *
+ * When the request has been processed, user-space must return the
+ * dm_ulog_request to the kernel - setting the 'error' field and
+ * 'data_size' appropriately.
+ */
+#define DM_ULOG_IS_REMOTE_RECOVERING 17
+
+/*
+ * (DM_ULOG_REQUEST_MASK & request_type) to get the request type
+ *
+ * Payload-to-userspace:
+ * A single string containing all the argv arguments separated by ' 's
+ * Payload-to-kernel:
+ * None. ('data_size' in the dm_ulog_request struct should be 0.)
+ *
+ * We are reserving 8 bits of the 32-bit 'request_type' field for the
+ * various request types above. The remaining 24-bits are currently
+ * set to zero and are reserved for future use and compatibility concerns.
+ *
+ * User-space should always use DM_ULOG_REQUEST_TYPE to aquire the
+ * request type from the 'request_type' field to maintain forward compatibility.
+ */
+#define DM_ULOG_REQUEST_MASK 0xFF
+#define DM_ULOG_REQUEST_TYPE(request_type) \
+ (DM_ULOG_REQUEST_MASK & (request_type))
+
+struct dm_ulog_request {
+ char uuid[DM_UUID_LEN]; /* Ties a request to a specific mirror log */
+ char padding[7]; /* Padding because DM_UUID_LEN = 129 */
+
+ int32_t error; /* Used to report back processing errors */
+
+ uint32_t seq; /* Sequence number for request */
+ uint32_t request_type; /* DM_ULOG_* defined above */
+ uint32_t data_size; /* How much data (not including this struct) */
+
+ char data[0];
+};
+
+#endif /* __DM_LOG_USERSPACE_H__ */
diff --git a/include/linux/dmar.h b/include/linux/dmar.h
index 1731fb5..4a2b162 100644
--- a/include/linux/dmar.h
+++ b/include/linux/dmar.h
@@ -126,6 +126,8 @@
extern int irq_remapped(int irq);
extern struct intel_iommu *map_dev_to_ir(struct pci_dev *dev);
extern struct intel_iommu *map_ioapic_to_ir(int apic);
+extern int set_ioapic_sid(struct irte *irte, int apic);
+extern int set_msi_sid(struct irte *irte, struct pci_dev *dev);
#else
static inline int alloc_irte(struct intel_iommu *iommu, int irq, u16 count)
{
@@ -156,6 +158,15 @@
{
return NULL;
}
+static inline int set_ioapic_sid(struct irte *irte, int apic)
+{
+ return 0;
+}
+static inline int set_msi_sid(struct irte *irte, struct pci_dev *dev)
+{
+ return 0;
+}
+
#define irq_remapped(irq) (0)
#define enable_intr_remapping(mode) (-1)
#define disable_intr_remapping() (0)
diff --git a/include/linux/ext3_fs_i.h b/include/linux/ext3_fs_i.h
index 7894dd0..ca1bfe9 100644
--- a/include/linux/ext3_fs_i.h
+++ b/include/linux/ext3_fs_i.h
@@ -103,10 +103,6 @@
*/
struct rw_semaphore xattr_sem;
#endif
-#ifdef CONFIG_EXT3_FS_POSIX_ACL
- struct posix_acl *i_acl;
- struct posix_acl *i_default_acl;
-#endif
struct list_head i_orphan; /* unlinked but open inodes */
diff --git a/include/linux/falloc.h b/include/linux/falloc.h
index 8e912ab..3c15510 100644
--- a/include/linux/falloc.h
+++ b/include/linux/falloc.h
@@ -3,4 +3,25 @@
#define FALLOC_FL_KEEP_SIZE 0x01 /* default is extend size */
+#ifdef __KERNEL__
+
+/*
+ * Space reservation ioctls and argument structure
+ * are designed to be compatible with the legacy XFS ioctls.
+ */
+struct space_resv {
+ __s16 l_type;
+ __s16 l_whence;
+ __s64 l_start;
+ __s64 l_len; /* len == 0 means until end of file */
+ __s32 l_sysid;
+ __u32 l_pid;
+ __s32 l_pad[4]; /* reserved area */
+};
+
+#define FS_IOC_RESVSP _IOW('X', 40, struct space_resv)
+#define FS_IOC_RESVSP64 _IOW('X', 42, struct space_resv)
+
+#endif /* __KERNEL__ */
+
#endif /* _FALLOC_H_ */
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 1ff5e4e..0872372 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -710,6 +710,9 @@
#define i_size_ordered_init(inode) do { } while (0)
#endif
+struct posix_acl;
+#define ACL_NOT_CACHED ((void *)(-1))
+
struct inode {
struct hlist_node i_hash;
struct list_head i_list;
@@ -773,6 +776,10 @@
#ifdef CONFIG_SECURITY
void *i_security;
#endif
+#ifdef CONFIG_FS_POSIX_ACL
+ struct posix_acl *i_acl;
+ struct posix_acl *i_default_acl;
+#endif
void *i_private; /* fs or device private pointer */
};
@@ -1906,6 +1913,8 @@
extern int do_truncate(struct dentry *, loff_t start, unsigned int time_attrs,
struct file *filp);
+extern int do_fallocate(struct file *file, int mode, loff_t offset,
+ loff_t len);
extern long do_sys_open(int dfd, const char __user *filename, int flags,
int mode);
extern struct file *filp_open(const char *, int, int);
@@ -1914,6 +1923,10 @@
extern int filp_close(struct file *, fl_owner_t id);
extern char * getname(const char __user *);
+/* fs/ioctl.c */
+
+extern int ioctl_preallocate(struct file *filp, void __user *argp);
+
/* fs/dcache.c */
extern void __init vfs_caches_init_early(void);
extern void __init vfs_caches_init(unsigned long);
diff --git a/include/linux/hugetlb.h b/include/linux/hugetlb.h
index a05a5ef..2723513 100644
--- a/include/linux/hugetlb.h
+++ b/include/linux/hugetlb.h
@@ -33,7 +33,7 @@
int hugetlb_report_node_meminfo(int, char *);
unsigned long hugetlb_total_pages(void);
int hugetlb_fault(struct mm_struct *mm, struct vm_area_struct *vma,
- unsigned long address, int write_access);
+ unsigned long address, unsigned int flags);
int hugetlb_reserve_pages(struct inode *inode, long from, long to,
struct vm_area_struct *vma,
int acctflags);
@@ -98,7 +98,7 @@
#define pud_huge(x) 0
#define is_hugepage_only_range(mm, addr, len) 0
#define hugetlb_free_pgd_range(tlb, addr, end, floor, ceiling) ({BUG(); 0; })
-#define hugetlb_fault(mm, vma, addr, write) ({ BUG(); 0; })
+#define hugetlb_fault(mm, vma, addr, flags) ({ BUG(); 0; })
#define hugetlb_change_protection(vma, address, end, newprot)
diff --git a/include/linux/icmpv6.h b/include/linux/icmpv6.h
index 10d701e..b6a8518 100644
--- a/include/linux/icmpv6.h
+++ b/include/linux/icmpv6.h
@@ -175,16 +175,16 @@
extern void icmpv6_send(struct sk_buff *skb,
- int type, int code,
+ u8 type, u8 code,
__u32 info,
struct net_device *dev);
extern int icmpv6_init(void);
-extern int icmpv6_err_convert(int type, int code,
+extern int icmpv6_err_convert(u8 type, u8 code,
int *err);
extern void icmpv6_cleanup(void);
extern void icmpv6_param_prob(struct sk_buff *skb,
- int code, int pos);
+ u8 code, int pos);
struct flowi;
struct in6_addr;
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 95c6e00..cf1f388 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -1361,7 +1361,6 @@
#ifdef CONFIG_BLK_DEV_IDEDMA
int ide_dma_good_drive(ide_drive_t *);
int __ide_dma_bad_drive(ide_drive_t *);
-int ide_id_dma_bug(ide_drive_t *);
u8 ide_find_dma_mode(ide_drive_t *, u8);
@@ -1402,7 +1401,6 @@
ide_startstop_t ide_dma_timeout_retry(ide_drive_t *, int);
#else
-static inline int ide_id_dma_bug(ide_drive_t *drive) { return 0; }
static inline u8 ide_find_dma_mode(ide_drive_t *drive, u8 speed) { return 0; }
static inline u8 ide_max_dma_mode(ide_drive_t *drive) { return 0; }
static inline void ide_dma_off_quietly(ide_drive_t *drive) { ; }
diff --git a/include/linux/lockdep.h b/include/linux/lockdep.h
index da5a5a1..b25d1b5 100644
--- a/include/linux/lockdep.h
+++ b/include/linux/lockdep.h
@@ -258,6 +258,16 @@
#define lockdep_set_subclass(lock, sub) \
lockdep_init_map(&(lock)->dep_map, #lock, \
(lock)->dep_map.key, sub)
+/*
+ * Compare locking classes
+ */
+#define lockdep_match_class(lock, key) lockdep_match_key(&(lock)->dep_map, key)
+
+static inline int lockdep_match_key(struct lockdep_map *lock,
+ struct lock_class_key *key)
+{
+ return lock->key == key;
+}
/*
* Acquire a lock.
@@ -326,6 +336,11 @@
#define lockdep_set_class_and_subclass(lock, key, sub) \
do { (void)(key); } while (0)
#define lockdep_set_subclass(lock, sub) do { } while (0)
+/*
+ * We don't define lockdep_match_class() and lockdep_match_key() for !LOCKDEP
+ * case since the result is not well defined and the caller should rather
+ * #ifdef the call himself.
+ */
# define INIT_LOCKDEP
# define lockdep_reset() do { debug_locks = 1; } while (0)
diff --git a/include/linux/max17040_battery.h b/include/linux/max17040_battery.h
new file mode 100644
index 0000000..ad97b06
--- /dev/null
+++ b/include/linux/max17040_battery.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright (C) 2009 Samsung Electronics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __MAX17040_BATTERY_H_
+#define __MAX17040_BATTERY_H_
+
+struct max17040_platform_data {
+ int (*battery_online)(void);
+ int (*charger_online)(void);
+ int (*charger_enable)(void);
+};
+
+#endif
diff --git a/include/linux/mm.h b/include/linux/mm.h
index d006e93..ba3a7cb 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -826,7 +826,7 @@
extern int access_process_vm(struct task_struct *tsk, unsigned long addr, void *buf, int len, int write);
int get_user_pages(struct task_struct *tsk, struct mm_struct *mm,
- unsigned long start, int len, int write, int force,
+ unsigned long start, int nr_pages, int write, int force,
struct page **pages, struct vm_area_struct **vmas);
int get_user_pages_fast(unsigned long start, int nr_pages, int write,
struct page **pages);
diff --git a/include/linux/pci_hotplug.h b/include/linux/pci_hotplug.h
index b3646cd..4391741 100644
--- a/include/linux/pci_hotplug.h
+++ b/include/linux/pci_hotplug.h
@@ -229,7 +229,6 @@
extern acpi_status acpi_get_hp_params_from_firmware(struct pci_bus *bus,
struct hotplug_params *hpp);
int acpi_get_hp_hw_control_from_firmware(struct pci_dev *dev, u32 flags);
-int acpi_root_bridge(acpi_handle handle);
int acpi_pci_check_ejectable(struct pci_bus *pbus, acpi_handle handle);
int acpi_pci_detect_ejectable(struct pci_bus *pbus);
#endif
diff --git a/include/linux/posix_acl.h b/include/linux/posix_acl.h
index 4bc2412..065a365 100644
--- a/include/linux/posix_acl.h
+++ b/include/linux/posix_acl.h
@@ -83,4 +83,78 @@
extern struct posix_acl *get_posix_acl(struct inode *, int);
extern int set_posix_acl(struct inode *, int, struct posix_acl *);
+#ifdef CONFIG_FS_POSIX_ACL
+static inline struct posix_acl *get_cached_acl(struct inode *inode, int type)
+{
+ struct posix_acl **p, *acl;
+ switch (type) {
+ case ACL_TYPE_ACCESS:
+ p = &inode->i_acl;
+ break;
+ case ACL_TYPE_DEFAULT:
+ p = &inode->i_default_acl;
+ break;
+ default:
+ return ERR_PTR(-EINVAL);
+ }
+ acl = ACCESS_ONCE(*p);
+ if (acl) {
+ spin_lock(&inode->i_lock);
+ acl = *p;
+ if (acl != ACL_NOT_CACHED)
+ acl = posix_acl_dup(acl);
+ spin_unlock(&inode->i_lock);
+ }
+ return acl;
+}
+
+static inline void set_cached_acl(struct inode *inode,
+ int type,
+ struct posix_acl *acl)
+{
+ struct posix_acl *old = NULL;
+ spin_lock(&inode->i_lock);
+ switch (type) {
+ case ACL_TYPE_ACCESS:
+ old = inode->i_acl;
+ inode->i_acl = posix_acl_dup(acl);
+ break;
+ case ACL_TYPE_DEFAULT:
+ old = inode->i_default_acl;
+ inode->i_default_acl = posix_acl_dup(acl);
+ break;
+ }
+ spin_unlock(&inode->i_lock);
+ if (old != ACL_NOT_CACHED)
+ posix_acl_release(old);
+}
+
+static inline void forget_cached_acl(struct inode *inode, int type)
+{
+ struct posix_acl *old = NULL;
+ spin_lock(&inode->i_lock);
+ switch (type) {
+ case ACL_TYPE_ACCESS:
+ old = inode->i_acl;
+ inode->i_acl = ACL_NOT_CACHED;
+ break;
+ case ACL_TYPE_DEFAULT:
+ old = inode->i_default_acl;
+ inode->i_default_acl = ACL_NOT_CACHED;
+ break;
+ }
+ spin_unlock(&inode->i_lock);
+ if (old != ACL_NOT_CACHED)
+ posix_acl_release(old);
+}
+#endif
+
+static inline void cache_no_acl(struct inode *inode)
+{
+#ifdef CONFIG_FS_POSIX_ACL
+ inode->i_acl = NULL;
+ inode->i_default_acl = NULL;
+#endif
+}
+
#endif /* __LINUX_POSIX_ACL_H */
diff --git a/include/linux/reiserfs_acl.h b/include/linux/reiserfs_acl.h
index 8cc6575..b444885 100644
--- a/include/linux/reiserfs_acl.h
+++ b/include/linux/reiserfs_acl.h
@@ -56,15 +56,6 @@
extern struct xattr_handler reiserfs_posix_acl_default_handler;
extern struct xattr_handler reiserfs_posix_acl_access_handler;
-static inline void reiserfs_init_acl_access(struct inode *inode)
-{
- REISERFS_I(inode)->i_acl_access = NULL;
-}
-
-static inline void reiserfs_init_acl_default(struct inode *inode)
-{
- REISERFS_I(inode)->i_acl_default = NULL;
-}
#else
#define reiserfs_cache_default_acl(inode) 0
@@ -86,12 +77,4 @@
{
return 0;
}
-
-static inline void reiserfs_init_acl_access(struct inode *inode)
-{
-}
-
-static inline void reiserfs_init_acl_default(struct inode *inode)
-{
-}
#endif
diff --git a/include/linux/reiserfs_fs_i.h b/include/linux/reiserfs_fs_i.h
index 76360b3..89f4d3a 100644
--- a/include/linux/reiserfs_fs_i.h
+++ b/include/linux/reiserfs_fs_i.h
@@ -54,10 +54,6 @@
unsigned int i_trans_id;
struct reiserfs_journal_list *i_jl;
struct mutex i_mmap;
-#ifdef CONFIG_REISERFS_FS_POSIX_ACL
- struct posix_acl *i_acl_access;
- struct posix_acl *i_acl_default;
-#endif
#ifdef CONFIG_REISERFS_FS_XATTR
struct rw_semaphore i_xattr_sem;
#endif
diff --git a/include/linux/rmap.h b/include/linux/rmap.h
index 216d024..bf116d0 100644
--- a/include/linux/rmap.h
+++ b/include/linux/rmap.h
@@ -118,7 +118,14 @@
#define anon_vma_prepare(vma) (0)
#define anon_vma_link(vma) do {} while (0)
-#define page_referenced(page, locked, cnt, flags) TestClearPageReferenced(page)
+static inline int page_referenced(struct page *page, int is_locked,
+ struct mem_cgroup *cnt,
+ unsigned long *vm_flags)
+{
+ *vm_flags = 0;
+ return TestClearPageReferenced(page);
+}
+
#define try_to_unmap(page, refs) SWAP_FAIL
static inline int page_mkclean(struct page *page)
diff --git a/include/linux/shmem_fs.h b/include/linux/shmem_fs.h
index fd83f25..abff6c9 100644
--- a/include/linux/shmem_fs.h
+++ b/include/linux/shmem_fs.h
@@ -19,10 +19,6 @@
swp_entry_t i_direct[SHMEM_NR_DIRECT]; /* first blocks */
struct list_head swaplist; /* chain of maybes on swap */
struct inode vfs_inode;
-#ifdef CONFIG_TMPFS_POSIX_ACL
- struct posix_acl *i_acl;
- struct posix_acl *i_default_acl;
-#endif
};
struct shmem_sb_info {
@@ -45,7 +41,6 @@
#ifdef CONFIG_TMPFS_POSIX_ACL
int shmem_permission(struct inode *, int);
int shmem_acl_init(struct inode *, struct inode *);
-void shmem_acl_destroy_inode(struct inode *);
extern struct xattr_handler shmem_xattr_acl_access_handler;
extern struct xattr_handler shmem_xattr_acl_default_handler;
@@ -57,9 +52,6 @@
{
return 0;
}
-static inline void shmem_acl_destroy_inode(struct inode *inode)
-{
-}
#endif /* CONFIG_TMPFS_POSIX_ACL */
#endif
diff --git a/include/linux/swap.h b/include/linux/swap.h
index c88b366..7c15334 100644
--- a/include/linux/swap.h
+++ b/include/linux/swap.h
@@ -298,8 +298,8 @@
struct backing_dev_info;
/* linux/mm/thrash.c */
-extern struct mm_struct * swap_token_mm;
-extern void grab_swap_token(void);
+extern struct mm_struct *swap_token_mm;
+extern void grab_swap_token(struct mm_struct *);
extern void __put_swap_token(struct mm_struct *);
static inline int has_swap_token(struct mm_struct *mm)
@@ -419,10 +419,10 @@
}
/* linux/mm/thrash.c */
-#define put_swap_token(x) do { } while(0)
-#define grab_swap_token() do { } while(0)
-#define has_swap_token(x) 0
-#define disable_swap_token() do { } while(0)
+#define put_swap_token(mm) do { } while (0)
+#define grab_swap_token(mm) do { } while (0)
+#define has_swap_token(mm) 0
+#define disable_swap_token() do { } while (0)
static inline void
mem_cgroup_uncharge_swapcache(struct page *page, swp_entry_t ent)
diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h
index f24ecee..8a025d5 100644
--- a/include/linux/videodev2.h
+++ b/include/linux/videodev2.h
@@ -348,6 +348,7 @@
#define V4L2_PIX_FMT_SQ905C v4l2_fourcc('9', '0', '5', 'C') /* compressed RGGB bayer */
#define V4L2_PIX_FMT_PJPG v4l2_fourcc('P', 'J', 'P', 'G') /* Pixart 73xx JPEG */
#define V4L2_PIX_FMT_YVYU v4l2_fourcc('Y', 'V', 'Y', 'U') /* 16 YVU 4:2:2 */
+#define V4L2_PIX_FMT_OV511 v4l2_fourcc('O', '5', '1', '1') /* ov511 JPEG */
#define V4L2_PIX_FMT_OV518 v4l2_fourcc('O', '5', '1', '8') /* ov518 JPEG */
/*
@@ -894,9 +895,10 @@
V4L2_COLORFX_BW = 1,
V4L2_COLORFX_SEPIA = 2,
};
+#define V4L2_CID_AUTOBRIGHTNESS (V4L2_CID_BASE+32)
/* last CID + 1 */
-#define V4L2_CID_LASTP1 (V4L2_CID_BASE+32)
+#define V4L2_CID_LASTP1 (V4L2_CID_BASE+33)
/* MPEG-class control IDs defined by V4L2 */
#define V4L2_CID_MPEG_BASE (V4L2_CTRL_CLASS_MPEG | 0x900)
diff --git a/include/media/ir-common.h b/include/media/ir-common.h
index 7b5b91f..9dcb632 100644
--- a/include/media/ir-common.h
+++ b/include/media/ir-common.h
@@ -162,6 +162,8 @@
extern IR_KEYTAB_TYPE ir_codes_kworld_plus_tv_analog[IR_KEYTAB_SIZE];
extern IR_KEYTAB_TYPE ir_codes_kaiomy[IR_KEYTAB_SIZE];
extern IR_KEYTAB_TYPE ir_codes_dm1105_nec[IR_KEYTAB_SIZE];
+extern IR_KEYTAB_TYPE ir_codes_evga_indtube[IR_KEYTAB_SIZE];
+
#endif
/*
diff --git a/include/media/v4l2-common.h b/include/media/v4l2-common.h
index c48c24e..33a1842 100644
--- a/include/media/v4l2-common.h
+++ b/include/media/v4l2-common.h
@@ -153,6 +153,22 @@
struct v4l2_subdev *v4l2_i2c_new_probed_subdev_addr(struct v4l2_device *v4l2_dev,
struct i2c_adapter *adapter,
const char *module_name, const char *client_type, u8 addr);
+
+/* Load an i2c module and return an initialized v4l2_subdev struct.
+ Only call request_module if module_name != NULL.
+ The client_type argument is the name of the chip that's on the adapter. */
+struct v4l2_subdev *v4l2_i2c_new_subdev_cfg(struct v4l2_device *v4l2_dev,
+ struct i2c_adapter *adapter,
+ const char *module_name, const char *client_type,
+ int irq, void *platform_data,
+ u8 addr, const unsigned short *probe_addrs);
+
+struct i2c_board_info;
+
+struct v4l2_subdev *v4l2_i2c_new_subdev_board(struct v4l2_device *v4l2_dev,
+ struct i2c_adapter *adapter, const char *module_name,
+ struct i2c_board_info *info, const unsigned short *probe_addrs);
+
/* Initialize an v4l2_subdev with data from an i2c_client struct */
void v4l2_i2c_subdev_init(struct v4l2_subdev *sd, struct i2c_client *client,
const struct v4l2_subdev_ops *ops);
@@ -193,4 +209,14 @@
u32 output;
};
+/* ------------------------------------------------------------------------- */
+
+/* Miscellaneous helper functions */
+
+void v4l_bound_align_image(unsigned int *w, unsigned int wmin,
+ unsigned int wmax, unsigned int walign,
+ unsigned int *h, unsigned int hmin,
+ unsigned int hmax, unsigned int halign,
+ unsigned int salign);
+
#endif /* V4L2_COMMON_H_ */
diff --git a/include/media/v4l2-i2c-drv.h b/include/media/v4l2-i2c-drv.h
index 10a2882..74bf741 100644
--- a/include/media/v4l2-i2c-drv.h
+++ b/include/media/v4l2-i2c-drv.h
@@ -22,7 +22,7 @@
*/
/* NOTE: the full version of this header is in the v4l-dvb repository
- * and allows v4l i2c drivers to be compiled on older kernels as well.
+ * and allows v4l i2c drivers to be compiled on pre-2.6.26 kernels.
* The version of this header as it appears in the kernel is a stripped
* version (without all the backwards compatibility stuff) and so it
* looks a bit odd.
@@ -30,6 +30,9 @@
* If you look at the full version then you will understand the reason
* for introducing this header since you really don't want to have all
* the tricky backwards compatibility code in each and every i2c driver.
+ *
+ * If the i2c driver will never be compiled for pre-2.6.26 kernels, then
+ * DO NOT USE this header! Just write it as a regular i2c driver.
*/
#ifndef __V4L2_I2C_DRV_H__
diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h
index a503e1c..5dcb367 100644
--- a/include/media/v4l2-subdev.h
+++ b/include/media/v4l2-subdev.h
@@ -79,7 +79,11 @@
not yet implemented) since ops provide proper type-checking.
*/
-/* init: initialize the sensor registors to some sort of reasonable default
+/* s_config: if set, then it is always called by the v4l2_i2c_new_subdev*
+ functions after the v4l2_subdev was registered. It is used to pass
+ platform data to the subdev which can be used during initialization.
+
+ init: initialize the sensor registors to some sort of reasonable default
values. Do not use for new drivers and should be removed in existing
drivers.
@@ -96,6 +100,7 @@
struct v4l2_subdev_core_ops {
int (*g_chip_ident)(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip);
int (*log_status)(struct v4l2_subdev *sd);
+ int (*s_config)(struct v4l2_subdev *sd, int irq, void *platform_data);
int (*init)(struct v4l2_subdev *sd, u32 val);
int (*load_fw)(struct v4l2_subdev *sd);
int (*reset)(struct v4l2_subdev *sd, u32 val);
diff --git a/include/net/protocol.h b/include/net/protocol.h
index ffa5b8b..1089d5a 100644
--- a/include/net/protocol.h
+++ b/include/net/protocol.h
@@ -53,7 +53,7 @@
void (*err_handler)(struct sk_buff *skb,
struct inet6_skb_parm *opt,
- int type, int code, int offset,
+ u8 type, u8 code, int offset,
__be32 info);
int (*gso_send_check)(struct sk_buff *skb);
diff --git a/include/net/rawv6.h b/include/net/rawv6.h
index 8a22599..f6b9b83 100644
--- a/include/net/rawv6.h
+++ b/include/net/rawv6.h
@@ -6,7 +6,7 @@
#include <net/protocol.h>
void raw6_icmp_error(struct sk_buff *, int nexthdr,
- int type, int code, int inner_offset, __be32);
+ u8 type, u8 code, int inner_offset, __be32);
int raw6_local_deliver(struct sk_buff *, int);
extern int rawv6_rcv(struct sock *sk,
diff --git a/include/net/sctp/sctp.h b/include/net/sctp/sctp.h
index 9f80a76..d16a304 100644
--- a/include/net/sctp/sctp.h
+++ b/include/net/sctp/sctp.h
@@ -448,6 +448,7 @@
{
struct sctp_ulpevent *event = sctp_skb2event(skb);
+ skb_orphan(skb);
skb->sk = sk;
skb->destructor = sctp_sock_rfree;
atomic_add(event->rmem_len, &sk->sk_rmem_alloc);
diff --git a/include/net/sock.h b/include/net/sock.h
index 07133c5..352f06bb 100644
--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -1252,6 +1252,7 @@
static inline void skb_set_owner_w(struct sk_buff *skb, struct sock *sk)
{
+ skb_orphan(skb);
skb->sk = sk;
skb->destructor = sock_wfree;
/*
@@ -1264,6 +1265,7 @@
static inline void skb_set_owner_r(struct sk_buff *skb, struct sock *sk)
{
+ skb_orphan(skb);
skb->sk = sk;
skb->destructor = sock_rfree;
atomic_add(skb->truesize, &sk->sk_rmem_alloc);
diff --git a/include/net/xfrm.h b/include/net/xfrm.h
index 736bca4..9e3a3f4 100644
--- a/include/net/xfrm.h
+++ b/include/net/xfrm.h
@@ -1274,7 +1274,7 @@
struct xfrm6_tunnel {
int (*handler)(struct sk_buff *skb);
int (*err_handler)(struct sk_buff *skb, struct inet6_skb_parm *opt,
- int type, int code, int offset, __be32 info);
+ u8 type, u8 code, int offset, __be32 info);
struct xfrm6_tunnel *next;
int priority;
};
diff --git a/include/scsi/fc_encode.h b/include/scsi/fc_encode.h
index 6300f55..a0ff61c 100644
--- a/include/scsi/fc_encode.h
+++ b/include/scsi/fc_encode.h
@@ -107,7 +107,6 @@
break;
default:
- FC_DBG("Invalid op code %x \n", op);
return -EINVAL;
}
*r_ctl = FC_RCTL_DD_UNSOL_CTL;
@@ -298,7 +297,6 @@
break;
default:
- FC_DBG("Invalid op code %x \n", op);
return -EINVAL;
}
diff --git a/include/scsi/libfc.h b/include/scsi/libfc.h
index ebdd9f4..b92584a 100644
--- a/include/scsi/libfc.h
+++ b/include/scsi/libfc.h
@@ -34,17 +34,72 @@
#include <scsi/fc_frame.h>
-#define LIBFC_DEBUG
+#define FC_LIBFC_LOGGING 0x01 /* General logging, not categorized */
+#define FC_LPORT_LOGGING 0x02 /* lport layer logging */
+#define FC_DISC_LOGGING 0x04 /* discovery layer logging */
+#define FC_RPORT_LOGGING 0x08 /* rport layer logging */
+#define FC_FCP_LOGGING 0x10 /* I/O path logging */
+#define FC_EM_LOGGING 0x20 /* Exchange Manager logging */
+#define FC_EXCH_LOGGING 0x40 /* Exchange/Sequence logging */
+#define FC_SCSI_LOGGING 0x80 /* SCSI logging (mostly error handling) */
-#ifdef LIBFC_DEBUG
-/* Log messages */
-#define FC_DBG(fmt, args...) \
- do { \
- printk(KERN_INFO "%s " fmt, __func__, ##args); \
- } while (0)
-#else
-#define FC_DBG(fmt, args...)
-#endif
+extern unsigned int fc_debug_logging;
+
+#define FC_CHECK_LOGGING(LEVEL, CMD) \
+do { \
+ if (unlikely(fc_debug_logging & LEVEL)) \
+ do { \
+ CMD; \
+ } while (0); \
+} while (0);
+
+#define FC_LIBFC_DBG(fmt, args...) \
+ FC_CHECK_LOGGING(FC_LIBFC_LOGGING, \
+ printk(KERN_INFO "libfc: " fmt, ##args);)
+
+#define FC_LPORT_DBG(lport, fmt, args...) \
+ FC_CHECK_LOGGING(FC_LPORT_LOGGING, \
+ printk(KERN_INFO "lport: %6x: " fmt, \
+ fc_host_port_id(lport->host), ##args);)
+
+#define FC_DISC_DBG(disc, fmt, args...) \
+ FC_CHECK_LOGGING(FC_DISC_LOGGING, \
+ printk(KERN_INFO "disc: %6x: " fmt, \
+ fc_host_port_id(disc->lport->host), \
+ ##args);)
+
+#define FC_RPORT_DBG(rport, fmt, args...) \
+do { \
+ struct fc_rport_libfc_priv *rdata = rport->dd_data; \
+ struct fc_lport *lport = rdata->local_port; \
+ FC_CHECK_LOGGING(FC_RPORT_LOGGING, \
+ printk(KERN_INFO "rport: %6x: %6x: " fmt, \
+ fc_host_port_id(lport->host), \
+ rport->port_id, ##args);) \
+} while (0);
+
+#define FC_FCP_DBG(pkt, fmt, args...) \
+ FC_CHECK_LOGGING(FC_FCP_LOGGING, \
+ printk(KERN_INFO "fcp: %6x: %6x: " fmt, \
+ fc_host_port_id(pkt->lp->host), \
+ pkt->rport->port_id, ##args);)
+
+#define FC_EM_DBG(em, fmt, args...) \
+ FC_CHECK_LOGGING(FC_EM_LOGGING, \
+ printk(KERN_INFO "em: %6x: " fmt, \
+ fc_host_port_id(em->lp->host), \
+ ##args);)
+
+#define FC_EXCH_DBG(exch, fmt, args...) \
+ FC_CHECK_LOGGING(FC_EXCH_LOGGING, \
+ printk(KERN_INFO "exch: %6x: %4x: " fmt, \
+ fc_host_port_id(exch->lp->host), \
+ exch->xid, ##args);)
+
+#define FC_SCSI_DBG(lport, fmt, args...) \
+ FC_CHECK_LOGGING(FC_SCSI_LOGGING, \
+ printk(KERN_INFO "scsi: %6x: " fmt, \
+ fc_host_port_id(lport->host), ##args);)
/*
* libfc error codes
diff --git a/include/scsi/libiscsi.h b/include/scsi/libiscsi.h
index 196525c..61afeb5 100644
--- a/include/scsi/libiscsi.h
+++ b/include/scsi/libiscsi.h
@@ -125,6 +125,10 @@
struct scsi_cmnd *sc; /* associated SCSI cmd*/
struct iscsi_conn *conn; /* used connection */
+ /* data processing tracking */
+ unsigned long last_xfer;
+ unsigned long last_timeout;
+ bool have_checked_conn;
/* state set/tested under session->lock */
int state;
atomic_t refcount;
diff --git a/include/scsi/scsi_driver.h b/include/scsi/scsi_driver.h
index 1f5ca7f..9fd6702 100644
--- a/include/scsi/scsi_driver.h
+++ b/include/scsi/scsi_driver.h
@@ -32,5 +32,6 @@
int scsi_setup_fs_cmnd(struct scsi_device *sdev, struct request *req);
int scsi_prep_state_check(struct scsi_device *sdev, struct request *req);
int scsi_prep_return(struct request_queue *q, struct request *req, int ret);
+int scsi_prep_fn(struct request_queue *, struct request *);
#endif /* _SCSI_SCSI_DRIVER_H */
diff --git a/init/main.c b/init/main.c
index 4870dfe..2c5ade79 100644
--- a/init/main.c
+++ b/init/main.c
@@ -24,6 +24,7 @@
#include <linux/smp_lock.h>
#include <linux/initrd.h>
#include <linux/bootmem.h>
+#include <linux/acpi.h>
#include <linux/tty.h>
#include <linux/gfp.h>
#include <linux/percpu.h>
@@ -88,11 +89,6 @@
extern void prio_tree_init(void);
extern void radix_tree_init(void);
extern void free_initmem(void);
-#ifdef CONFIG_ACPI
-extern void acpi_early_init(void);
-#else
-static inline void acpi_early_init(void) { }
-#endif
#ifndef CONFIG_DEBUG_RODATA
static inline void mark_rodata_ro(void) { }
#endif
diff --git a/kernel/Makefile b/kernel/Makefile
index 0a32cb2..780c8dc 100644
--- a/kernel/Makefile
+++ b/kernel/Makefile
@@ -69,7 +69,7 @@
obj-$(CONFIG_RESOURCE_COUNTERS) += res_counter.o
obj-$(CONFIG_STOP_MACHINE) += stop_machine.o
obj-$(CONFIG_KPROBES_SANITY_TEST) += test_kprobes.o
-obj-$(CONFIG_AUDIT) += audit.o auditfilter.o
+obj-$(CONFIG_AUDIT) += audit.o auditfilter.o audit_watch.o
obj-$(CONFIG_AUDITSYSCALL) += auditsc.o
obj-$(CONFIG_GCOV_KERNEL) += gcov/
obj-$(CONFIG_AUDIT_TREE) += audit_tree.o
diff --git a/kernel/audit.c b/kernel/audit.c
index 9442c35..defc2e6 100644
--- a/kernel/audit.c
+++ b/kernel/audit.c
@@ -115,9 +115,6 @@
/* The netlink socket. */
static struct sock *audit_sock;
-/* Inotify handle. */
-struct inotify_handle *audit_ih;
-
/* Hash for inode-based rules */
struct list_head audit_inode_hash[AUDIT_INODE_BUCKETS];
@@ -136,7 +133,7 @@
static DECLARE_WAIT_QUEUE_HEAD(audit_backlog_wait);
/* Serialize requests from userspace. */
-static DEFINE_MUTEX(audit_cmd_mutex);
+DEFINE_MUTEX(audit_cmd_mutex);
/* AUDIT_BUFSIZ is the size of the temporary buffer used for formatting
* audit records. Since printk uses a 1024 byte buffer, this buffer
@@ -375,6 +372,25 @@
kfree_skb(skb);
}
+/*
+ * For one reason or another this nlh isn't getting delivered to the userspace
+ * audit daemon, just send it to printk.
+ */
+static void audit_printk_skb(struct sk_buff *skb)
+{
+ struct nlmsghdr *nlh = nlmsg_hdr(skb);
+ char *data = NLMSG_DATA(nlh);
+
+ if (nlh->nlmsg_type != AUDIT_EOE) {
+ if (printk_ratelimit())
+ printk(KERN_NOTICE "type=%d %s\n", nlh->nlmsg_type, data);
+ else
+ audit_log_lost("printk limit exceeded\n");
+ }
+
+ audit_hold_skb(skb);
+}
+
static void kauditd_send_skb(struct sk_buff *skb)
{
int err;
@@ -427,14 +443,8 @@
if (skb) {
if (audit_pid)
kauditd_send_skb(skb);
- else {
- if (printk_ratelimit())
- printk(KERN_NOTICE "%s\n", skb->data + NLMSG_SPACE(0));
- else
- audit_log_lost("printk limit exceeded\n");
-
- audit_hold_skb(skb);
- }
+ else
+ audit_printk_skb(skb);
} else {
DECLARE_WAITQUEUE(wait, current);
set_current_state(TASK_INTERRUPTIBLE);
@@ -495,42 +505,25 @@
return 0;
}
-#ifdef CONFIG_AUDIT_TREE
-static int prune_tree_thread(void *unused)
-{
- mutex_lock(&audit_cmd_mutex);
- audit_prune_trees();
- mutex_unlock(&audit_cmd_mutex);
- return 0;
-}
-
-void audit_schedule_prune(void)
-{
- kthread_run(prune_tree_thread, NULL, "audit_prune_tree");
-}
-#endif
-
struct sk_buff *audit_make_reply(int pid, int seq, int type, int done,
int multi, void *payload, int size)
{
struct sk_buff *skb;
struct nlmsghdr *nlh;
- int len = NLMSG_SPACE(size);
void *data;
int flags = multi ? NLM_F_MULTI : 0;
int t = done ? NLMSG_DONE : type;
- skb = alloc_skb(len, GFP_KERNEL);
+ skb = nlmsg_new(size, GFP_KERNEL);
if (!skb)
return NULL;
- nlh = NLMSG_PUT(skb, pid, seq, t, size);
- nlh->nlmsg_flags = flags;
- data = NLMSG_DATA(nlh);
+ nlh = NLMSG_NEW(skb, pid, seq, t, size, flags);
+ data = NLMSG_DATA(nlh);
memcpy(data, payload, size);
return skb;
-nlmsg_failure: /* Used by NLMSG_PUT */
+nlmsg_failure: /* Used by NLMSG_NEW */
if (skb)
kfree_skb(skb);
return NULL;
@@ -926,28 +919,29 @@
}
/*
- * Get message from skb (based on rtnetlink_rcv_skb). Each message is
- * processed by audit_receive_msg. Malformed skbs with wrong length are
- * discarded silently.
+ * Get message from skb. Each message is processed by audit_receive_msg.
+ * Malformed skbs with wrong length are discarded silently.
*/
static void audit_receive_skb(struct sk_buff *skb)
{
- int err;
- struct nlmsghdr *nlh;
- u32 rlen;
+ struct nlmsghdr *nlh;
+ /*
+ * len MUST be signed for NLMSG_NEXT to be able to dec it below 0
+ * if the nlmsg_len was not aligned
+ */
+ int len;
+ int err;
- while (skb->len >= NLMSG_SPACE(0)) {
- nlh = nlmsg_hdr(skb);
- if (nlh->nlmsg_len < sizeof(*nlh) || skb->len < nlh->nlmsg_len)
- return;
- rlen = NLMSG_ALIGN(nlh->nlmsg_len);
- if (rlen > skb->len)
- rlen = skb->len;
- if ((err = audit_receive_msg(skb, nlh))) {
+ nlh = nlmsg_hdr(skb);
+ len = skb->len;
+
+ while (NLMSG_OK(nlh, len)) {
+ err = audit_receive_msg(skb, nlh);
+ /* if err or if this message says it wants a response */
+ if (err || (nlh->nlmsg_flags & NLM_F_ACK))
netlink_ack(skb, nlh, err);
- } else if (nlh->nlmsg_flags & NLM_F_ACK)
- netlink_ack(skb, nlh, 0);
- skb_pull(skb, rlen);
+
+ nlh = NLMSG_NEXT(nlh, len);
}
}
@@ -959,13 +953,6 @@
mutex_unlock(&audit_cmd_mutex);
}
-#ifdef CONFIG_AUDITSYSCALL
-static const struct inotify_operations audit_inotify_ops = {
- .handle_event = audit_handle_ievent,
- .destroy_watch = audit_free_parent,
-};
-#endif
-
/* Initialize audit support at boot time. */
static int __init audit_init(void)
{
@@ -991,12 +978,6 @@
audit_log(NULL, GFP_KERNEL, AUDIT_KERNEL, "initialized");
-#ifdef CONFIG_AUDITSYSCALL
- audit_ih = inotify_init(&audit_inotify_ops);
- if (IS_ERR(audit_ih))
- audit_panic("cannot initialize inotify handle");
-#endif
-
for (i = 0; i < AUDIT_INODE_BUCKETS; i++)
INIT_LIST_HEAD(&audit_inode_hash[i]);
@@ -1070,18 +1051,20 @@
goto err;
}
- ab->skb = alloc_skb(AUDIT_BUFSIZ, gfp_mask);
- if (!ab->skb)
- goto err;
-
ab->ctx = ctx;
ab->gfp_mask = gfp_mask;
- nlh = (struct nlmsghdr *)skb_put(ab->skb, NLMSG_SPACE(0));
- nlh->nlmsg_type = type;
- nlh->nlmsg_flags = 0;
- nlh->nlmsg_pid = 0;
- nlh->nlmsg_seq = 0;
+
+ ab->skb = nlmsg_new(AUDIT_BUFSIZ, gfp_mask);
+ if (!ab->skb)
+ goto nlmsg_failure;
+
+ nlh = NLMSG_NEW(ab->skb, 0, 0, type, 0, 0);
+
return ab;
+
+nlmsg_failure: /* Used by NLMSG_NEW */
+ kfree_skb(ab->skb);
+ ab->skb = NULL;
err:
audit_buffer_free(ab);
return NULL;
@@ -1452,6 +1435,15 @@
kfree(pathname);
}
+void audit_log_key(struct audit_buffer *ab, char *key)
+{
+ audit_log_format(ab, " key=");
+ if (key)
+ audit_log_untrustedstring(ab, key);
+ else
+ audit_log_format(ab, "(null)");
+}
+
/**
* audit_log_end - end one audit record
* @ab: the audit_buffer
@@ -1475,15 +1467,7 @@
skb_queue_tail(&audit_skb_queue, ab->skb);
wake_up_interruptible(&kauditd_wait);
} else {
- if (nlh->nlmsg_type != AUDIT_EOE) {
- if (printk_ratelimit()) {
- printk(KERN_NOTICE "type=%d %s\n",
- nlh->nlmsg_type,
- ab->skb->data + NLMSG_SPACE(0));
- } else
- audit_log_lost("printk limit exceeded\n");
- }
- audit_hold_skb(ab->skb);
+ audit_printk_skb(ab->skb);
}
ab->skb = NULL;
}
diff --git a/kernel/audit.h b/kernel/audit.h
index 16f18ca..208687b 100644
--- a/kernel/audit.h
+++ b/kernel/audit.h
@@ -53,18 +53,7 @@
};
/* Rule lists */
-struct audit_parent;
-
-struct audit_watch {
- atomic_t count; /* reference count */
- char *path; /* insertion path */
- dev_t dev; /* associated superblock device */
- unsigned long ino; /* associated inode number */
- struct audit_parent *parent; /* associated parent */
- struct list_head wlist; /* entry in parent->watches list */
- struct list_head rules; /* associated rules */
-};
-
+struct audit_watch;
struct audit_tree;
struct audit_chunk;
@@ -108,19 +97,28 @@
int audit_send_list(void *);
-struct inotify_watch;
-/* Inotify handle */
-extern struct inotify_handle *audit_ih;
-
-extern void audit_free_parent(struct inotify_watch *);
-extern void audit_handle_ievent(struct inotify_watch *, u32, u32, u32,
- const char *, struct inode *);
extern int selinux_audit_rule_update(void);
extern struct mutex audit_filter_mutex;
extern void audit_free_rule_rcu(struct rcu_head *);
extern struct list_head audit_filter_list[];
+/* audit watch functions */
+extern unsigned long audit_watch_inode(struct audit_watch *watch);
+extern dev_t audit_watch_dev(struct audit_watch *watch);
+extern void audit_put_watch(struct audit_watch *watch);
+extern void audit_get_watch(struct audit_watch *watch);
+extern int audit_to_watch(struct audit_krule *krule, char *path, int len, u32 op);
+extern int audit_add_watch(struct audit_krule *krule);
+extern void audit_remove_watch(struct audit_watch *watch);
+extern void audit_remove_watch_rule(struct audit_krule *krule, struct list_head *list);
+extern void audit_inotify_unregister(struct list_head *in_list);
+extern char *audit_watch_path(struct audit_watch *watch);
+extern struct list_head *audit_watch_rules(struct audit_watch *watch);
+
+extern struct audit_entry *audit_dupe_rule(struct audit_krule *old,
+ struct audit_watch *watch);
+
#ifdef CONFIG_AUDIT_TREE
extern struct audit_chunk *audit_tree_lookup(const struct inode *);
extern void audit_put_chunk(struct audit_chunk *);
@@ -130,10 +128,9 @@
extern int audit_remove_tree_rule(struct audit_krule *);
extern void audit_trim_trees(void);
extern int audit_tag_tree(char *old, char *new);
-extern void audit_schedule_prune(void);
-extern void audit_prune_trees(void);
extern const char *audit_tree_path(struct audit_tree *);
extern void audit_put_tree(struct audit_tree *);
+extern void audit_kill_trees(struct list_head *);
#else
#define audit_remove_tree_rule(rule) BUG()
#define audit_add_tree_rule(rule) -EINVAL
@@ -142,6 +139,7 @@
#define audit_put_tree(tree) (void)0
#define audit_tag_tree(old, new) -EINVAL
#define audit_tree_path(rule) "" /* never called */
+#define audit_kill_trees(list) BUG()
#endif
extern char *audit_unpack_string(void **, size_t *, size_t);
@@ -160,7 +158,10 @@
return 0;
}
extern void audit_filter_inodes(struct task_struct *, struct audit_context *);
+extern struct list_head *audit_killed_trees(void);
#else
#define audit_signal_info(s,t) AUDIT_DISABLED
#define audit_filter_inodes(t,c) AUDIT_DISABLED
#endif
+
+extern struct mutex audit_cmd_mutex;
diff --git a/kernel/audit_tree.c b/kernel/audit_tree.c
index 1f6396d7..2451dc6 100644
--- a/kernel/audit_tree.c
+++ b/kernel/audit_tree.c
@@ -2,6 +2,7 @@
#include <linux/inotify.h>
#include <linux/namei.h>
#include <linux/mount.h>
+#include <linux/kthread.h>
struct audit_tree;
struct audit_chunk;
@@ -441,13 +442,11 @@
if (rule->tree) {
/* not a half-baked one */
ab = audit_log_start(NULL, GFP_KERNEL, AUDIT_CONFIG_CHANGE);
- audit_log_format(ab, "op=remove rule dir=");
+ audit_log_format(ab, "op=");
+ audit_log_string(ab, "remove rule");
+ audit_log_format(ab, " dir=");
audit_log_untrustedstring(ab, rule->tree->pathname);
- if (rule->filterkey) {
- audit_log_format(ab, " key=");
- audit_log_untrustedstring(ab, rule->filterkey);
- } else
- audit_log_format(ab, " key=(null)");
+ audit_log_key(ab, rule->filterkey);
audit_log_format(ab, " list=%d res=1", rule->listnr);
audit_log_end(ab);
rule->tree = NULL;
@@ -519,6 +518,8 @@
}
}
+static void audit_schedule_prune(void);
+
/* called with audit_filter_mutex */
int audit_remove_tree_rule(struct audit_krule *rule)
{
@@ -824,10 +825,11 @@
/*
* That gets run when evict_chunk() ends up needing to kill audit_tree.
- * Runs from a separate thread, with audit_cmd_mutex held.
+ * Runs from a separate thread.
*/
-void audit_prune_trees(void)
+static int prune_tree_thread(void *unused)
{
+ mutex_lock(&audit_cmd_mutex);
mutex_lock(&audit_filter_mutex);
while (!list_empty(&prune_list)) {
@@ -844,6 +846,40 @@
}
mutex_unlock(&audit_filter_mutex);
+ mutex_unlock(&audit_cmd_mutex);
+ return 0;
+}
+
+static void audit_schedule_prune(void)
+{
+ kthread_run(prune_tree_thread, NULL, "audit_prune_tree");
+}
+
+/*
+ * ... and that one is done if evict_chunk() decides to delay until the end
+ * of syscall. Runs synchronously.
+ */
+void audit_kill_trees(struct list_head *list)
+{
+ mutex_lock(&audit_cmd_mutex);
+ mutex_lock(&audit_filter_mutex);
+
+ while (!list_empty(list)) {
+ struct audit_tree *victim;
+
+ victim = list_entry(list->next, struct audit_tree, list);
+ kill_rules(victim);
+ list_del_init(&victim->list);
+
+ mutex_unlock(&audit_filter_mutex);
+
+ prune_one(victim);
+
+ mutex_lock(&audit_filter_mutex);
+ }
+
+ mutex_unlock(&audit_filter_mutex);
+ mutex_unlock(&audit_cmd_mutex);
}
/*
@@ -854,6 +890,8 @@
static void evict_chunk(struct audit_chunk *chunk)
{
struct audit_tree *owner;
+ struct list_head *postponed = audit_killed_trees();
+ int need_prune = 0;
int n;
if (chunk->dead)
@@ -869,15 +907,21 @@
owner->root = NULL;
list_del_init(&owner->same_root);
spin_unlock(&hash_lock);
- kill_rules(owner);
- list_move(&owner->list, &prune_list);
- audit_schedule_prune();
+ if (!postponed) {
+ kill_rules(owner);
+ list_move(&owner->list, &prune_list);
+ need_prune = 1;
+ } else {
+ list_move(&owner->list, postponed);
+ }
spin_lock(&hash_lock);
}
list_del_rcu(&chunk->hash);
for (n = 0; n < chunk->count; n++)
list_del_init(&chunk->owners[n].list);
spin_unlock(&hash_lock);
+ if (need_prune)
+ audit_schedule_prune();
mutex_unlock(&audit_filter_mutex);
}
diff --git a/kernel/audit_watch.c b/kernel/audit_watch.c
new file mode 100644
index 0000000..0e96dbc
--- /dev/null
+++ b/kernel/audit_watch.c
@@ -0,0 +1,543 @@
+/* audit_watch.c -- watching inodes
+ *
+ * Copyright 2003-2009 Red Hat, Inc.
+ * Copyright 2005 Hewlett-Packard Development Company, L.P.
+ * Copyright 2005 IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/audit.h>
+#include <linux/kthread.h>
+#include <linux/mutex.h>
+#include <linux/fs.h>
+#include <linux/namei.h>
+#include <linux/netlink.h>
+#include <linux/sched.h>
+#include <linux/inotify.h>
+#include <linux/security.h>
+#include "audit.h"
+
+/*
+ * Reference counting:
+ *
+ * audit_parent: lifetime is from audit_init_parent() to receipt of an IN_IGNORED
+ * event. Each audit_watch holds a reference to its associated parent.
+ *
+ * audit_watch: if added to lists, lifetime is from audit_init_watch() to
+ * audit_remove_watch(). Additionally, an audit_watch may exist
+ * temporarily to assist in searching existing filter data. Each
+ * audit_krule holds a reference to its associated watch.
+ */
+
+struct audit_watch {
+ atomic_t count; /* reference count */
+ char *path; /* insertion path */
+ dev_t dev; /* associated superblock device */
+ unsigned long ino; /* associated inode number */
+ struct audit_parent *parent; /* associated parent */
+ struct list_head wlist; /* entry in parent->watches list */
+ struct list_head rules; /* associated rules */
+};
+
+struct audit_parent {
+ struct list_head ilist; /* entry in inotify registration list */
+ struct list_head watches; /* associated watches */
+ struct inotify_watch wdata; /* inotify watch data */
+ unsigned flags; /* status flags */
+};
+
+/* Inotify handle. */
+struct inotify_handle *audit_ih;
+
+/*
+ * audit_parent status flags:
+ *
+ * AUDIT_PARENT_INVALID - set anytime rules/watches are auto-removed due to
+ * a filesystem event to ensure we're adding audit watches to a valid parent.
+ * Technically not needed for IN_DELETE_SELF or IN_UNMOUNT events, as we cannot
+ * receive them while we have nameidata, but must be used for IN_MOVE_SELF which
+ * we can receive while holding nameidata.
+ */
+#define AUDIT_PARENT_INVALID 0x001
+
+/* Inotify events we care about. */
+#define AUDIT_IN_WATCH IN_MOVE|IN_CREATE|IN_DELETE|IN_DELETE_SELF|IN_MOVE_SELF
+
+static void audit_free_parent(struct inotify_watch *i_watch)
+{
+ struct audit_parent *parent;
+
+ parent = container_of(i_watch, struct audit_parent, wdata);
+ WARN_ON(!list_empty(&parent->watches));
+ kfree(parent);
+}
+
+void audit_get_watch(struct audit_watch *watch)
+{
+ atomic_inc(&watch->count);
+}
+
+void audit_put_watch(struct audit_watch *watch)
+{
+ if (atomic_dec_and_test(&watch->count)) {
+ WARN_ON(watch->parent);
+ WARN_ON(!list_empty(&watch->rules));
+ kfree(watch->path);
+ kfree(watch);
+ }
+}
+
+void audit_remove_watch(struct audit_watch *watch)
+{
+ list_del(&watch->wlist);
+ put_inotify_watch(&watch->parent->wdata);
+ watch->parent = NULL;
+ audit_put_watch(watch); /* match initial get */
+}
+
+char *audit_watch_path(struct audit_watch *watch)
+{
+ return watch->path;
+}
+
+struct list_head *audit_watch_rules(struct audit_watch *watch)
+{
+ return &watch->rules;
+}
+
+unsigned long audit_watch_inode(struct audit_watch *watch)
+{
+ return watch->ino;
+}
+
+dev_t audit_watch_dev(struct audit_watch *watch)
+{
+ return watch->dev;
+}
+
+/* Initialize a parent watch entry. */
+static struct audit_parent *audit_init_parent(struct nameidata *ndp)
+{
+ struct audit_parent *parent;
+ s32 wd;
+
+ parent = kzalloc(sizeof(*parent), GFP_KERNEL);
+ if (unlikely(!parent))
+ return ERR_PTR(-ENOMEM);
+
+ INIT_LIST_HEAD(&parent->watches);
+ parent->flags = 0;
+
+ inotify_init_watch(&parent->wdata);
+ /* grab a ref so inotify watch hangs around until we take audit_filter_mutex */
+ get_inotify_watch(&parent->wdata);
+ wd = inotify_add_watch(audit_ih, &parent->wdata,
+ ndp->path.dentry->d_inode, AUDIT_IN_WATCH);
+ if (wd < 0) {
+ audit_free_parent(&parent->wdata);
+ return ERR_PTR(wd);
+ }
+
+ return parent;
+}
+
+/* Initialize a watch entry. */
+static struct audit_watch *audit_init_watch(char *path)
+{
+ struct audit_watch *watch;
+
+ watch = kzalloc(sizeof(*watch), GFP_KERNEL);
+ if (unlikely(!watch))
+ return ERR_PTR(-ENOMEM);
+
+ INIT_LIST_HEAD(&watch->rules);
+ atomic_set(&watch->count, 1);
+ watch->path = path;
+ watch->dev = (dev_t)-1;
+ watch->ino = (unsigned long)-1;
+
+ return watch;
+}
+
+/* Translate a watch string to kernel respresentation. */
+int audit_to_watch(struct audit_krule *krule, char *path, int len, u32 op)
+{
+ struct audit_watch *watch;
+
+ if (!audit_ih)
+ return -EOPNOTSUPP;
+
+ if (path[0] != '/' || path[len-1] == '/' ||
+ krule->listnr != AUDIT_FILTER_EXIT ||
+ op != Audit_equal ||
+ krule->inode_f || krule->watch || krule->tree)
+ return -EINVAL;
+
+ watch = audit_init_watch(path);
+ if (IS_ERR(watch))
+ return PTR_ERR(watch);
+
+ audit_get_watch(watch);
+ krule->watch = watch;
+
+ return 0;
+}
+
+/* Duplicate the given audit watch. The new watch's rules list is initialized
+ * to an empty list and wlist is undefined. */
+static struct audit_watch *audit_dupe_watch(struct audit_watch *old)
+{
+ char *path;
+ struct audit_watch *new;
+
+ path = kstrdup(old->path, GFP_KERNEL);
+ if (unlikely(!path))
+ return ERR_PTR(-ENOMEM);
+
+ new = audit_init_watch(path);
+ if (IS_ERR(new)) {
+ kfree(path);
+ goto out;
+ }
+
+ new->dev = old->dev;
+ new->ino = old->ino;
+ get_inotify_watch(&old->parent->wdata);
+ new->parent = old->parent;
+
+out:
+ return new;
+}
+
+static void audit_watch_log_rule_change(struct audit_krule *r, struct audit_watch *w, char *op)
+{
+ if (audit_enabled) {
+ struct audit_buffer *ab;
+ ab = audit_log_start(NULL, GFP_NOFS, AUDIT_CONFIG_CHANGE);
+ audit_log_format(ab, "auid=%u ses=%u op=",
+ audit_get_loginuid(current),
+ audit_get_sessionid(current));
+ audit_log_string(ab, op);
+ audit_log_format(ab, " path=");
+ audit_log_untrustedstring(ab, w->path);
+ audit_log_key(ab, r->filterkey);
+ audit_log_format(ab, " list=%d res=1", r->listnr);
+ audit_log_end(ab);
+ }
+}
+
+/* Update inode info in audit rules based on filesystem event. */
+static void audit_update_watch(struct audit_parent *parent,
+ const char *dname, dev_t dev,
+ unsigned long ino, unsigned invalidating)
+{
+ struct audit_watch *owatch, *nwatch, *nextw;
+ struct audit_krule *r, *nextr;
+ struct audit_entry *oentry, *nentry;
+
+ mutex_lock(&audit_filter_mutex);
+ list_for_each_entry_safe(owatch, nextw, &parent->watches, wlist) {
+ if (audit_compare_dname_path(dname, owatch->path, NULL))
+ continue;
+
+ /* If the update involves invalidating rules, do the inode-based
+ * filtering now, so we don't omit records. */
+ if (invalidating && current->audit_context)
+ audit_filter_inodes(current, current->audit_context);
+
+ nwatch = audit_dupe_watch(owatch);
+ if (IS_ERR(nwatch)) {
+ mutex_unlock(&audit_filter_mutex);
+ audit_panic("error updating watch, skipping");
+ return;
+ }
+ nwatch->dev = dev;
+ nwatch->ino = ino;
+
+ list_for_each_entry_safe(r, nextr, &owatch->rules, rlist) {
+
+ oentry = container_of(r, struct audit_entry, rule);
+ list_del(&oentry->rule.rlist);
+ list_del_rcu(&oentry->list);
+
+ nentry = audit_dupe_rule(&oentry->rule, nwatch);
+ if (IS_ERR(nentry)) {
+ list_del(&oentry->rule.list);
+ audit_panic("error updating watch, removing");
+ } else {
+ int h = audit_hash_ino((u32)ino);
+ list_add(&nentry->rule.rlist, &nwatch->rules);
+ list_add_rcu(&nentry->list, &audit_inode_hash[h]);
+ list_replace(&oentry->rule.list,
+ &nentry->rule.list);
+ }
+
+ audit_watch_log_rule_change(r, owatch, "updated rules");
+
+ call_rcu(&oentry->rcu, audit_free_rule_rcu);
+ }
+
+ audit_remove_watch(owatch);
+ goto add_watch_to_parent; /* event applies to a single watch */
+ }
+ mutex_unlock(&audit_filter_mutex);
+ return;
+
+add_watch_to_parent:
+ list_add(&nwatch->wlist, &parent->watches);
+ mutex_unlock(&audit_filter_mutex);
+ return;
+}
+
+/* Remove all watches & rules associated with a parent that is going away. */
+static void audit_remove_parent_watches(struct audit_parent *parent)
+{
+ struct audit_watch *w, *nextw;
+ struct audit_krule *r, *nextr;
+ struct audit_entry *e;
+
+ mutex_lock(&audit_filter_mutex);
+ parent->flags |= AUDIT_PARENT_INVALID;
+ list_for_each_entry_safe(w, nextw, &parent->watches, wlist) {
+ list_for_each_entry_safe(r, nextr, &w->rules, rlist) {
+ e = container_of(r, struct audit_entry, rule);
+ audit_watch_log_rule_change(r, w, "remove rule");
+ list_del(&r->rlist);
+ list_del(&r->list);
+ list_del_rcu(&e->list);
+ call_rcu(&e->rcu, audit_free_rule_rcu);
+ }
+ audit_remove_watch(w);
+ }
+ mutex_unlock(&audit_filter_mutex);
+}
+
+/* Unregister inotify watches for parents on in_list.
+ * Generates an IN_IGNORED event. */
+void audit_inotify_unregister(struct list_head *in_list)
+{
+ struct audit_parent *p, *n;
+
+ list_for_each_entry_safe(p, n, in_list, ilist) {
+ list_del(&p->ilist);
+ inotify_rm_watch(audit_ih, &p->wdata);
+ /* the unpin matching the pin in audit_do_del_rule() */
+ unpin_inotify_watch(&p->wdata);
+ }
+}
+
+/* Get path information necessary for adding watches. */
+static int audit_get_nd(char *path, struct nameidata **ndp, struct nameidata **ndw)
+{
+ struct nameidata *ndparent, *ndwatch;
+ int err;
+
+ ndparent = kmalloc(sizeof(*ndparent), GFP_KERNEL);
+ if (unlikely(!ndparent))
+ return -ENOMEM;
+
+ ndwatch = kmalloc(sizeof(*ndwatch), GFP_KERNEL);
+ if (unlikely(!ndwatch)) {
+ kfree(ndparent);
+ return -ENOMEM;
+ }
+
+ err = path_lookup(path, LOOKUP_PARENT, ndparent);
+ if (err) {
+ kfree(ndparent);
+ kfree(ndwatch);
+ return err;
+ }
+
+ err = path_lookup(path, 0, ndwatch);
+ if (err) {
+ kfree(ndwatch);
+ ndwatch = NULL;
+ }
+
+ *ndp = ndparent;
+ *ndw = ndwatch;
+
+ return 0;
+}
+
+/* Release resources used for watch path information. */
+static void audit_put_nd(struct nameidata *ndp, struct nameidata *ndw)
+{
+ if (ndp) {
+ path_put(&ndp->path);
+ kfree(ndp);
+ }
+ if (ndw) {
+ path_put(&ndw->path);
+ kfree(ndw);
+ }
+}
+
+/* Associate the given rule with an existing parent inotify_watch.
+ * Caller must hold audit_filter_mutex. */
+static void audit_add_to_parent(struct audit_krule *krule,
+ struct audit_parent *parent)
+{
+ struct audit_watch *w, *watch = krule->watch;
+ int watch_found = 0;
+
+ list_for_each_entry(w, &parent->watches, wlist) {
+ if (strcmp(watch->path, w->path))
+ continue;
+
+ watch_found = 1;
+
+ /* put krule's and initial refs to temporary watch */
+ audit_put_watch(watch);
+ audit_put_watch(watch);
+
+ audit_get_watch(w);
+ krule->watch = watch = w;
+ break;
+ }
+
+ if (!watch_found) {
+ get_inotify_watch(&parent->wdata);
+ watch->parent = parent;
+
+ list_add(&watch->wlist, &parent->watches);
+ }
+ list_add(&krule->rlist, &watch->rules);
+}
+
+/* Find a matching watch entry, or add this one.
+ * Caller must hold audit_filter_mutex. */
+int audit_add_watch(struct audit_krule *krule)
+{
+ struct audit_watch *watch = krule->watch;
+ struct inotify_watch *i_watch;
+ struct audit_parent *parent;
+ struct nameidata *ndp = NULL, *ndw = NULL;
+ int ret = 0;
+
+ mutex_unlock(&audit_filter_mutex);
+
+ /* Avoid calling path_lookup under audit_filter_mutex. */
+ ret = audit_get_nd(watch->path, &ndp, &ndw);
+ if (ret) {
+ /* caller expects mutex locked */
+ mutex_lock(&audit_filter_mutex);
+ goto error;
+ }
+
+ /* update watch filter fields */
+ if (ndw) {
+ watch->dev = ndw->path.dentry->d_inode->i_sb->s_dev;
+ watch->ino = ndw->path.dentry->d_inode->i_ino;
+ }
+
+ /* The audit_filter_mutex must not be held during inotify calls because
+ * we hold it during inotify event callback processing. If an existing
+ * inotify watch is found, inotify_find_watch() grabs a reference before
+ * returning.
+ */
+ if (inotify_find_watch(audit_ih, ndp->path.dentry->d_inode,
+ &i_watch) < 0) {
+ parent = audit_init_parent(ndp);
+ if (IS_ERR(parent)) {
+ /* caller expects mutex locked */
+ mutex_lock(&audit_filter_mutex);
+ ret = PTR_ERR(parent);
+ goto error;
+ }
+ } else
+ parent = container_of(i_watch, struct audit_parent, wdata);
+
+ mutex_lock(&audit_filter_mutex);
+
+ /* parent was moved before we took audit_filter_mutex */
+ if (parent->flags & AUDIT_PARENT_INVALID)
+ ret = -ENOENT;
+ else
+ audit_add_to_parent(krule, parent);
+
+ /* match get in audit_init_parent or inotify_find_watch */
+ put_inotify_watch(&parent->wdata);
+
+error:
+ audit_put_nd(ndp, ndw); /* NULL args OK */
+ return ret;
+
+}
+
+void audit_remove_watch_rule(struct audit_krule *krule, struct list_head *list)
+{
+ struct audit_watch *watch = krule->watch;
+ struct audit_parent *parent = watch->parent;
+
+ list_del(&krule->rlist);
+
+ if (list_empty(&watch->rules)) {
+ audit_remove_watch(watch);
+
+ if (list_empty(&parent->watches)) {
+ /* Put parent on the inotify un-registration
+ * list. Grab a reference before releasing
+ * audit_filter_mutex, to be released in
+ * audit_inotify_unregister().
+ * If filesystem is going away, just leave
+ * the sucker alone, eviction will take
+ * care of it. */
+ if (pin_inotify_watch(&parent->wdata))
+ list_add(&parent->ilist, list);
+ }
+ }
+}
+
+/* Update watch data in audit rules based on inotify events. */
+static void audit_handle_ievent(struct inotify_watch *i_watch, u32 wd, u32 mask,
+ u32 cookie, const char *dname, struct inode *inode)
+{
+ struct audit_parent *parent;
+
+ parent = container_of(i_watch, struct audit_parent, wdata);
+
+ if (mask & (IN_CREATE|IN_MOVED_TO) && inode)
+ audit_update_watch(parent, dname, inode->i_sb->s_dev,
+ inode->i_ino, 0);
+ else if (mask & (IN_DELETE|IN_MOVED_FROM))
+ audit_update_watch(parent, dname, (dev_t)-1, (unsigned long)-1, 1);
+ /* inotify automatically removes the watch and sends IN_IGNORED */
+ else if (mask & (IN_DELETE_SELF|IN_UNMOUNT))
+ audit_remove_parent_watches(parent);
+ /* inotify does not remove the watch, so remove it manually */
+ else if(mask & IN_MOVE_SELF) {
+ audit_remove_parent_watches(parent);
+ inotify_remove_watch_locked(audit_ih, i_watch);
+ } else if (mask & IN_IGNORED)
+ put_inotify_watch(i_watch);
+}
+
+static const struct inotify_operations audit_inotify_ops = {
+ .handle_event = audit_handle_ievent,
+ .destroy_watch = audit_free_parent,
+};
+
+static int __init audit_watch_init(void)
+{
+ audit_ih = inotify_init(&audit_inotify_ops);
+ if (IS_ERR(audit_ih))
+ audit_panic("cannot initialize inotify handle");
+ return 0;
+}
+subsys_initcall(audit_watch_init);
diff --git a/kernel/auditfilter.c b/kernel/auditfilter.c
index 713098e..a706040 100644
--- a/kernel/auditfilter.c
+++ b/kernel/auditfilter.c
@@ -27,7 +27,6 @@
#include <linux/namei.h>
#include <linux/netlink.h>
#include <linux/sched.h>
-#include <linux/inotify.h>
#include <linux/security.h>
#include "audit.h"
@@ -44,36 +43,6 @@
* be written directly provided audit_filter_mutex is held.
*/
-/*
- * Reference counting:
- *
- * audit_parent: lifetime is from audit_init_parent() to receipt of an IN_IGNORED
- * event. Each audit_watch holds a reference to its associated parent.
- *
- * audit_watch: if added to lists, lifetime is from audit_init_watch() to
- * audit_remove_watch(). Additionally, an audit_watch may exist
- * temporarily to assist in searching existing filter data. Each
- * audit_krule holds a reference to its associated watch.
- */
-
-struct audit_parent {
- struct list_head ilist; /* entry in inotify registration list */
- struct list_head watches; /* associated watches */
- struct inotify_watch wdata; /* inotify watch data */
- unsigned flags; /* status flags */
-};
-
-/*
- * audit_parent status flags:
- *
- * AUDIT_PARENT_INVALID - set anytime rules/watches are auto-removed due to
- * a filesystem event to ensure we're adding audit watches to a valid parent.
- * Technically not needed for IN_DELETE_SELF or IN_UNMOUNT events, as we cannot
- * receive them while we have nameidata, but must be used for IN_MOVE_SELF which
- * we can receive while holding nameidata.
- */
-#define AUDIT_PARENT_INVALID 0x001
-
/* Audit filter lists, defined in <linux/audit.h> */
struct list_head audit_filter_list[AUDIT_NR_FILTERS] = {
LIST_HEAD_INIT(audit_filter_list[0]),
@@ -97,41 +66,6 @@
DEFINE_MUTEX(audit_filter_mutex);
-/* Inotify events we care about. */
-#define AUDIT_IN_WATCH IN_MOVE|IN_CREATE|IN_DELETE|IN_DELETE_SELF|IN_MOVE_SELF
-
-void audit_free_parent(struct inotify_watch *i_watch)
-{
- struct audit_parent *parent;
-
- parent = container_of(i_watch, struct audit_parent, wdata);
- WARN_ON(!list_empty(&parent->watches));
- kfree(parent);
-}
-
-static inline void audit_get_watch(struct audit_watch *watch)
-{
- atomic_inc(&watch->count);
-}
-
-static void audit_put_watch(struct audit_watch *watch)
-{
- if (atomic_dec_and_test(&watch->count)) {
- WARN_ON(watch->parent);
- WARN_ON(!list_empty(&watch->rules));
- kfree(watch->path);
- kfree(watch);
- }
-}
-
-static void audit_remove_watch(struct audit_watch *watch)
-{
- list_del(&watch->wlist);
- put_inotify_watch(&watch->parent->wdata);
- watch->parent = NULL;
- audit_put_watch(watch); /* match initial get */
-}
-
static inline void audit_free_rule(struct audit_entry *e)
{
int i;
@@ -156,50 +90,6 @@
audit_free_rule(e);
}
-/* Initialize a parent watch entry. */
-static struct audit_parent *audit_init_parent(struct nameidata *ndp)
-{
- struct audit_parent *parent;
- s32 wd;
-
- parent = kzalloc(sizeof(*parent), GFP_KERNEL);
- if (unlikely(!parent))
- return ERR_PTR(-ENOMEM);
-
- INIT_LIST_HEAD(&parent->watches);
- parent->flags = 0;
-
- inotify_init_watch(&parent->wdata);
- /* grab a ref so inotify watch hangs around until we take audit_filter_mutex */
- get_inotify_watch(&parent->wdata);
- wd = inotify_add_watch(audit_ih, &parent->wdata,
- ndp->path.dentry->d_inode, AUDIT_IN_WATCH);
- if (wd < 0) {
- audit_free_parent(&parent->wdata);
- return ERR_PTR(wd);
- }
-
- return parent;
-}
-
-/* Initialize a watch entry. */
-static struct audit_watch *audit_init_watch(char *path)
-{
- struct audit_watch *watch;
-
- watch = kzalloc(sizeof(*watch), GFP_KERNEL);
- if (unlikely(!watch))
- return ERR_PTR(-ENOMEM);
-
- INIT_LIST_HEAD(&watch->rules);
- atomic_set(&watch->count, 1);
- watch->path = path;
- watch->dev = (dev_t)-1;
- watch->ino = (unsigned long)-1;
-
- return watch;
-}
-
/* Initialize an audit filterlist entry. */
static inline struct audit_entry *audit_init_entry(u32 field_count)
{
@@ -260,31 +150,6 @@
return 0;
}
-/* Translate a watch string to kernel respresentation. */
-static int audit_to_watch(struct audit_krule *krule, char *path, int len,
- u32 op)
-{
- struct audit_watch *watch;
-
- if (!audit_ih)
- return -EOPNOTSUPP;
-
- if (path[0] != '/' || path[len-1] == '/' ||
- krule->listnr != AUDIT_FILTER_EXIT ||
- op != Audit_equal ||
- krule->inode_f || krule->watch || krule->tree)
- return -EINVAL;
-
- watch = audit_init_watch(path);
- if (IS_ERR(watch))
- return PTR_ERR(watch);
-
- audit_get_watch(watch);
- krule->watch = watch;
-
- return 0;
-}
-
static __u32 *classes[AUDIT_SYSCALL_CLASSES];
int __init audit_register_class(int class, unsigned *list)
@@ -766,7 +631,8 @@
break;
case AUDIT_WATCH:
data->buflen += data->values[i] =
- audit_pack_string(&bufp, krule->watch->path);
+ audit_pack_string(&bufp,
+ audit_watch_path(krule->watch));
break;
case AUDIT_DIR:
data->buflen += data->values[i] =
@@ -818,7 +684,8 @@
return 1;
break;
case AUDIT_WATCH:
- if (strcmp(a->watch->path, b->watch->path))
+ if (strcmp(audit_watch_path(a->watch),
+ audit_watch_path(b->watch)))
return 1;
break;
case AUDIT_DIR:
@@ -844,32 +711,6 @@
return 0;
}
-/* Duplicate the given audit watch. The new watch's rules list is initialized
- * to an empty list and wlist is undefined. */
-static struct audit_watch *audit_dupe_watch(struct audit_watch *old)
-{
- char *path;
- struct audit_watch *new;
-
- path = kstrdup(old->path, GFP_KERNEL);
- if (unlikely(!path))
- return ERR_PTR(-ENOMEM);
-
- new = audit_init_watch(path);
- if (IS_ERR(new)) {
- kfree(path);
- goto out;
- }
-
- new->dev = old->dev;
- new->ino = old->ino;
- get_inotify_watch(&old->parent->wdata);
- new->parent = old->parent;
-
-out:
- return new;
-}
-
/* Duplicate LSM field information. The lsm_rule is opaque, so must be
* re-initialized. */
static inline int audit_dupe_lsm_field(struct audit_field *df,
@@ -904,8 +745,8 @@
* rule with the new rule in the filterlist, then free the old rule.
* The rlist element is undefined; list manipulations are handled apart from
* the initial copy. */
-static struct audit_entry *audit_dupe_rule(struct audit_krule *old,
- struct audit_watch *watch)
+struct audit_entry *audit_dupe_rule(struct audit_krule *old,
+ struct audit_watch *watch)
{
u32 fcount = old->field_count;
struct audit_entry *entry;
@@ -977,137 +818,6 @@
return entry;
}
-/* Update inode info in audit rules based on filesystem event. */
-static void audit_update_watch(struct audit_parent *parent,
- const char *dname, dev_t dev,
- unsigned long ino, unsigned invalidating)
-{
- struct audit_watch *owatch, *nwatch, *nextw;
- struct audit_krule *r, *nextr;
- struct audit_entry *oentry, *nentry;
-
- mutex_lock(&audit_filter_mutex);
- list_for_each_entry_safe(owatch, nextw, &parent->watches, wlist) {
- if (audit_compare_dname_path(dname, owatch->path, NULL))
- continue;
-
- /* If the update involves invalidating rules, do the inode-based
- * filtering now, so we don't omit records. */
- if (invalidating && current->audit_context)
- audit_filter_inodes(current, current->audit_context);
-
- nwatch = audit_dupe_watch(owatch);
- if (IS_ERR(nwatch)) {
- mutex_unlock(&audit_filter_mutex);
- audit_panic("error updating watch, skipping");
- return;
- }
- nwatch->dev = dev;
- nwatch->ino = ino;
-
- list_for_each_entry_safe(r, nextr, &owatch->rules, rlist) {
-
- oentry = container_of(r, struct audit_entry, rule);
- list_del(&oentry->rule.rlist);
- list_del_rcu(&oentry->list);
-
- nentry = audit_dupe_rule(&oentry->rule, nwatch);
- if (IS_ERR(nentry)) {
- list_del(&oentry->rule.list);
- audit_panic("error updating watch, removing");
- } else {
- int h = audit_hash_ino((u32)ino);
- list_add(&nentry->rule.rlist, &nwatch->rules);
- list_add_rcu(&nentry->list, &audit_inode_hash[h]);
- list_replace(&oentry->rule.list,
- &nentry->rule.list);
- }
-
- call_rcu(&oentry->rcu, audit_free_rule_rcu);
- }
-
- if (audit_enabled) {
- struct audit_buffer *ab;
- ab = audit_log_start(NULL, GFP_NOFS,
- AUDIT_CONFIG_CHANGE);
- audit_log_format(ab, "auid=%u ses=%u",
- audit_get_loginuid(current),
- audit_get_sessionid(current));
- audit_log_format(ab,
- " op=updated rules specifying path=");
- audit_log_untrustedstring(ab, owatch->path);
- audit_log_format(ab, " with dev=%u ino=%lu\n",
- dev, ino);
- audit_log_format(ab, " list=%d res=1", r->listnr);
- audit_log_end(ab);
- }
- audit_remove_watch(owatch);
- goto add_watch_to_parent; /* event applies to a single watch */
- }
- mutex_unlock(&audit_filter_mutex);
- return;
-
-add_watch_to_parent:
- list_add(&nwatch->wlist, &parent->watches);
- mutex_unlock(&audit_filter_mutex);
- return;
-}
-
-/* Remove all watches & rules associated with a parent that is going away. */
-static void audit_remove_parent_watches(struct audit_parent *parent)
-{
- struct audit_watch *w, *nextw;
- struct audit_krule *r, *nextr;
- struct audit_entry *e;
-
- mutex_lock(&audit_filter_mutex);
- parent->flags |= AUDIT_PARENT_INVALID;
- list_for_each_entry_safe(w, nextw, &parent->watches, wlist) {
- list_for_each_entry_safe(r, nextr, &w->rules, rlist) {
- e = container_of(r, struct audit_entry, rule);
- if (audit_enabled) {
- struct audit_buffer *ab;
- ab = audit_log_start(NULL, GFP_NOFS,
- AUDIT_CONFIG_CHANGE);
- audit_log_format(ab, "auid=%u ses=%u",
- audit_get_loginuid(current),
- audit_get_sessionid(current));
- audit_log_format(ab, " op=remove rule path=");
- audit_log_untrustedstring(ab, w->path);
- if (r->filterkey) {
- audit_log_format(ab, " key=");
- audit_log_untrustedstring(ab,
- r->filterkey);
- } else
- audit_log_format(ab, " key=(null)");
- audit_log_format(ab, " list=%d res=1",
- r->listnr);
- audit_log_end(ab);
- }
- list_del(&r->rlist);
- list_del(&r->list);
- list_del_rcu(&e->list);
- call_rcu(&e->rcu, audit_free_rule_rcu);
- }
- audit_remove_watch(w);
- }
- mutex_unlock(&audit_filter_mutex);
-}
-
-/* Unregister inotify watches for parents on in_list.
- * Generates an IN_IGNORED event. */
-static void audit_inotify_unregister(struct list_head *in_list)
-{
- struct audit_parent *p, *n;
-
- list_for_each_entry_safe(p, n, in_list, ilist) {
- list_del(&p->ilist);
- inotify_rm_watch(audit_ih, &p->wdata);
- /* the unpin matching the pin in audit_do_del_rule() */
- unpin_inotify_watch(&p->wdata);
- }
-}
-
/* Find an existing audit rule.
* Caller must hold audit_filter_mutex to prevent stale rule data. */
static struct audit_entry *audit_find_rule(struct audit_entry *entry,
@@ -1145,134 +855,6 @@
return found;
}
-/* Get path information necessary for adding watches. */
-static int audit_get_nd(char *path, struct nameidata **ndp,
- struct nameidata **ndw)
-{
- struct nameidata *ndparent, *ndwatch;
- int err;
-
- ndparent = kmalloc(sizeof(*ndparent), GFP_KERNEL);
- if (unlikely(!ndparent))
- return -ENOMEM;
-
- ndwatch = kmalloc(sizeof(*ndwatch), GFP_KERNEL);
- if (unlikely(!ndwatch)) {
- kfree(ndparent);
- return -ENOMEM;
- }
-
- err = path_lookup(path, LOOKUP_PARENT, ndparent);
- if (err) {
- kfree(ndparent);
- kfree(ndwatch);
- return err;
- }
-
- err = path_lookup(path, 0, ndwatch);
- if (err) {
- kfree(ndwatch);
- ndwatch = NULL;
- }
-
- *ndp = ndparent;
- *ndw = ndwatch;
-
- return 0;
-}
-
-/* Release resources used for watch path information. */
-static void audit_put_nd(struct nameidata *ndp, struct nameidata *ndw)
-{
- if (ndp) {
- path_put(&ndp->path);
- kfree(ndp);
- }
- if (ndw) {
- path_put(&ndw->path);
- kfree(ndw);
- }
-}
-
-/* Associate the given rule with an existing parent inotify_watch.
- * Caller must hold audit_filter_mutex. */
-static void audit_add_to_parent(struct audit_krule *krule,
- struct audit_parent *parent)
-{
- struct audit_watch *w, *watch = krule->watch;
- int watch_found = 0;
-
- list_for_each_entry(w, &parent->watches, wlist) {
- if (strcmp(watch->path, w->path))
- continue;
-
- watch_found = 1;
-
- /* put krule's and initial refs to temporary watch */
- audit_put_watch(watch);
- audit_put_watch(watch);
-
- audit_get_watch(w);
- krule->watch = watch = w;
- break;
- }
-
- if (!watch_found) {
- get_inotify_watch(&parent->wdata);
- watch->parent = parent;
-
- list_add(&watch->wlist, &parent->watches);
- }
- list_add(&krule->rlist, &watch->rules);
-}
-
-/* Find a matching watch entry, or add this one.
- * Caller must hold audit_filter_mutex. */
-static int audit_add_watch(struct audit_krule *krule, struct nameidata *ndp,
- struct nameidata *ndw)
-{
- struct audit_watch *watch = krule->watch;
- struct inotify_watch *i_watch;
- struct audit_parent *parent;
- int ret = 0;
-
- /* update watch filter fields */
- if (ndw) {
- watch->dev = ndw->path.dentry->d_inode->i_sb->s_dev;
- watch->ino = ndw->path.dentry->d_inode->i_ino;
- }
-
- /* The audit_filter_mutex must not be held during inotify calls because
- * we hold it during inotify event callback processing. If an existing
- * inotify watch is found, inotify_find_watch() grabs a reference before
- * returning.
- */
- mutex_unlock(&audit_filter_mutex);
-
- if (inotify_find_watch(audit_ih, ndp->path.dentry->d_inode,
- &i_watch) < 0) {
- parent = audit_init_parent(ndp);
- if (IS_ERR(parent)) {
- /* caller expects mutex locked */
- mutex_lock(&audit_filter_mutex);
- return PTR_ERR(parent);
- }
- } else
- parent = container_of(i_watch, struct audit_parent, wdata);
-
- mutex_lock(&audit_filter_mutex);
-
- /* parent was moved before we took audit_filter_mutex */
- if (parent->flags & AUDIT_PARENT_INVALID)
- ret = -ENOENT;
- else
- audit_add_to_parent(krule, parent);
-
- /* match get in audit_init_parent or inotify_find_watch */
- put_inotify_watch(&parent->wdata);
- return ret;
-}
-
static u64 prio_low = ~0ULL/2;
static u64 prio_high = ~0ULL/2 - 1;
@@ -1282,7 +864,6 @@
struct audit_entry *e;
struct audit_watch *watch = entry->rule.watch;
struct audit_tree *tree = entry->rule.tree;
- struct nameidata *ndp = NULL, *ndw = NULL;
struct list_head *list;
int h, err;
#ifdef CONFIG_AUDITSYSCALL
@@ -1296,8 +877,8 @@
mutex_lock(&audit_filter_mutex);
e = audit_find_rule(entry, &list);
- mutex_unlock(&audit_filter_mutex);
if (e) {
+ mutex_unlock(&audit_filter_mutex);
err = -EEXIST;
/* normally audit_add_tree_rule() will free it on failure */
if (tree)
@@ -1305,22 +886,16 @@
goto error;
}
- /* Avoid calling path_lookup under audit_filter_mutex. */
- if (watch) {
- err = audit_get_nd(watch->path, &ndp, &ndw);
- if (err)
- goto error;
- }
-
- mutex_lock(&audit_filter_mutex);
if (watch) {
/* audit_filter_mutex is dropped and re-taken during this call */
- err = audit_add_watch(&entry->rule, ndp, ndw);
+ err = audit_add_watch(&entry->rule);
if (err) {
mutex_unlock(&audit_filter_mutex);
goto error;
}
- h = audit_hash_ino((u32)watch->ino);
+ /* entry->rule.watch may have changed during audit_add_watch() */
+ watch = entry->rule.watch;
+ h = audit_hash_ino((u32)audit_watch_inode(watch));
list = &audit_inode_hash[h];
}
if (tree) {
@@ -1358,11 +933,9 @@
#endif
mutex_unlock(&audit_filter_mutex);
- audit_put_nd(ndp, ndw); /* NULL args OK */
return 0;
error:
- audit_put_nd(ndp, ndw); /* NULL args OK */
if (watch)
audit_put_watch(watch); /* tmp watch, matches initial get */
return err;
@@ -1372,7 +945,7 @@
static inline int audit_del_rule(struct audit_entry *entry)
{
struct audit_entry *e;
- struct audit_watch *watch, *tmp_watch = entry->rule.watch;
+ struct audit_watch *watch = entry->rule.watch;
struct audit_tree *tree = entry->rule.tree;
struct list_head *list;
LIST_HEAD(inotify_list);
@@ -1394,29 +967,8 @@
goto out;
}
- watch = e->rule.watch;
- if (watch) {
- struct audit_parent *parent = watch->parent;
-
- list_del(&e->rule.rlist);
-
- if (list_empty(&watch->rules)) {
- audit_remove_watch(watch);
-
- if (list_empty(&parent->watches)) {
- /* Put parent on the inotify un-registration
- * list. Grab a reference before releasing
- * audit_filter_mutex, to be released in
- * audit_inotify_unregister().
- * If filesystem is going away, just leave
- * the sucker alone, eviction will take
- * care of it.
- */
- if (pin_inotify_watch(&parent->wdata))
- list_add(&parent->ilist, &inotify_list);
- }
- }
- }
+ if (e->rule.watch)
+ audit_remove_watch_rule(&e->rule, &inotify_list);
if (e->rule.tree)
audit_remove_tree_rule(&e->rule);
@@ -1438,8 +990,8 @@
audit_inotify_unregister(&inotify_list);
out:
- if (tmp_watch)
- audit_put_watch(tmp_watch); /* match initial get */
+ if (watch)
+ audit_put_watch(watch); /* match initial get */
if (tree)
audit_put_tree(tree); /* that's the temporary one */
@@ -1527,11 +1079,9 @@
security_release_secctx(ctx, len);
}
}
- audit_log_format(ab, " op=%s rule key=", action);
- if (rule->filterkey)
- audit_log_untrustedstring(ab, rule->filterkey);
- else
- audit_log_format(ab, "(null)");
+ audit_log_format(ab, " op=");
+ audit_log_string(ab, action);
+ audit_log_key(ab, rule->filterkey);
audit_log_format(ab, " list=%d res=%d", rule->listnr, res);
audit_log_end(ab);
}
@@ -1595,7 +1145,7 @@
return PTR_ERR(entry);
err = audit_add_rule(entry);
- audit_log_rule_change(loginuid, sessionid, sid, "add",
+ audit_log_rule_change(loginuid, sessionid, sid, "add rule",
&entry->rule, !err);
if (err)
@@ -1611,7 +1161,7 @@
return PTR_ERR(entry);
err = audit_del_rule(entry);
- audit_log_rule_change(loginuid, sessionid, sid, "remove",
+ audit_log_rule_change(loginuid, sessionid, sid, "remove rule",
&entry->rule, !err);
audit_free_rule(entry);
@@ -1793,7 +1343,7 @@
list_del(&r->list);
} else {
if (watch) {
- list_add(&nentry->rule.rlist, &watch->rules);
+ list_add(&nentry->rule.rlist, audit_watch_rules(watch));
list_del(&r->rlist);
} else if (tree)
list_replace_init(&r->rlist, &nentry->rule.rlist);
@@ -1829,27 +1379,3 @@
return err;
}
-
-/* Update watch data in audit rules based on inotify events. */
-void audit_handle_ievent(struct inotify_watch *i_watch, u32 wd, u32 mask,
- u32 cookie, const char *dname, struct inode *inode)
-{
- struct audit_parent *parent;
-
- parent = container_of(i_watch, struct audit_parent, wdata);
-
- if (mask & (IN_CREATE|IN_MOVED_TO) && inode)
- audit_update_watch(parent, dname, inode->i_sb->s_dev,
- inode->i_ino, 0);
- else if (mask & (IN_DELETE|IN_MOVED_FROM))
- audit_update_watch(parent, dname, (dev_t)-1, (unsigned long)-1, 1);
- /* inotify automatically removes the watch and sends IN_IGNORED */
- else if (mask & (IN_DELETE_SELF|IN_UNMOUNT))
- audit_remove_parent_watches(parent);
- /* inotify does not remove the watch, so remove it manually */
- else if(mask & IN_MOVE_SELF) {
- audit_remove_parent_watches(parent);
- inotify_remove_watch_locked(audit_ih, i_watch);
- } else if (mask & IN_IGNORED)
- put_inotify_watch(i_watch);
-}
diff --git a/kernel/auditsc.c b/kernel/auditsc.c
index 7d6ac7c..68d3c6a 100644
--- a/kernel/auditsc.c
+++ b/kernel/auditsc.c
@@ -199,6 +199,7 @@
struct audit_tree_refs *trees, *first_trees;
int tree_count;
+ struct list_head killed_trees;
int type;
union {
@@ -548,9 +549,9 @@
}
break;
case AUDIT_WATCH:
- if (name && rule->watch->ino != (unsigned long)-1)
- result = (name->dev == rule->watch->dev &&
- name->ino == rule->watch->ino);
+ if (name && audit_watch_inode(rule->watch) != (unsigned long)-1)
+ result = (name->dev == audit_watch_dev(rule->watch) &&
+ name->ino == audit_watch_inode(rule->watch));
break;
case AUDIT_DIR:
if (ctx)
@@ -853,6 +854,7 @@
if (!(context = kmalloc(sizeof(*context), GFP_KERNEL)))
return NULL;
audit_zero_context(context, state);
+ INIT_LIST_HEAD(&context->killed_trees);
return context;
}
@@ -1024,8 +1026,8 @@
{
char arg_num_len_buf[12];
const char __user *tmp_p = p;
- /* how many digits are in arg_num? 3 is the length of " a=" */
- size_t arg_num_len = snprintf(arg_num_len_buf, 12, "%d", arg_num) + 3;
+ /* how many digits are in arg_num? 5 is the length of ' a=""' */
+ size_t arg_num_len = snprintf(arg_num_len_buf, 12, "%d", arg_num) + 5;
size_t len, len_left, to_send;
size_t max_execve_audit_len = MAX_EXECVE_AUDIT_LEN;
unsigned int i, has_cntl = 0, too_long = 0;
@@ -1137,7 +1139,7 @@
if (has_cntl)
audit_log_n_hex(*ab, buf, to_send);
else
- audit_log_format(*ab, "\"%s\"", buf);
+ audit_log_string(*ab, buf);
p += to_send;
len_left -= to_send;
@@ -1372,11 +1374,7 @@
audit_log_task_info(ab, tsk);
- if (context->filterkey) {
- audit_log_format(ab, " key=");
- audit_log_untrustedstring(ab, context->filterkey);
- } else
- audit_log_format(ab, " key=(null)");
+ audit_log_key(ab, context->filterkey);
audit_log_end(ab);
for (aux = context->aux; aux; aux = aux->next) {
@@ -1549,6 +1547,8 @@
/* that can happen only if we are called from do_exit() */
if (context->in_syscall && context->current_state == AUDIT_RECORD_CONTEXT)
audit_log_exit(context, tsk);
+ if (!list_empty(&context->killed_trees))
+ audit_kill_trees(&context->killed_trees);
audit_free_context(context);
}
@@ -1692,6 +1692,9 @@
context->in_syscall = 0;
context->prio = context->state == AUDIT_RECORD_CONTEXT ? ~0ULL : 0;
+ if (!list_empty(&context->killed_trees))
+ audit_kill_trees(&context->killed_trees);
+
if (context->previous) {
struct audit_context *new_context = context->previous;
context->previous = NULL;
@@ -2525,3 +2528,11 @@
audit_log_format(ab, " sig=%ld", signr);
audit_log_end(ab);
}
+
+struct list_head *audit_killed_trees(void)
+{
+ struct audit_context *ctx = current->audit_context;
+ if (likely(!ctx || !ctx->in_syscall))
+ return NULL;
+ return &ctx->killed_trees;
+}
diff --git a/kernel/futex.c b/kernel/futex.c
index 80b5ce7..794c862 100644
--- a/kernel/futex.c
+++ b/kernel/futex.c
@@ -284,6 +284,25 @@
drop_futex_key_refs(key);
}
+/*
+ * fault_in_user_writeable - fault in user address and verify RW access
+ * @uaddr: pointer to faulting user space address
+ *
+ * Slow path to fixup the fault we just took in the atomic write
+ * access to @uaddr.
+ *
+ * We have no generic implementation of a non destructive write to the
+ * user address. We know that we faulted in the atomic pagefault
+ * disabled section so we can as well avoid the #PF overhead by
+ * calling get_user_pages() right away.
+ */
+static int fault_in_user_writeable(u32 __user *uaddr)
+{
+ int ret = get_user_pages(current, current->mm, (unsigned long)uaddr,
+ 1, 1, 0, NULL, NULL);
+ return ret < 0 ? ret : 0;
+}
+
/**
* futex_top_waiter() - Return the highest priority waiter on a futex
* @hb: the hash bucket the futex_q's reside in
@@ -896,7 +915,6 @@
retry_private:
op_ret = futex_atomic_op_inuser(op, uaddr2);
if (unlikely(op_ret < 0)) {
- u32 dummy;
double_unlock_hb(hb1, hb2);
@@ -914,7 +932,7 @@
goto out_put_keys;
}
- ret = get_user(dummy, uaddr2);
+ ret = fault_in_user_writeable(uaddr2);
if (ret)
goto out_put_keys;
@@ -1204,7 +1222,7 @@
double_unlock_hb(hb1, hb2);
put_futex_key(fshared, &key2);
put_futex_key(fshared, &key1);
- ret = get_user(curval2, uaddr2);
+ ret = fault_in_user_writeable(uaddr2);
if (!ret)
goto retry;
goto out;
@@ -1482,7 +1500,7 @@
handle_fault:
spin_unlock(q->lock_ptr);
- ret = get_user(uval, uaddr);
+ ret = fault_in_user_writeable(uaddr);
spin_lock(q->lock_ptr);
@@ -1807,7 +1825,6 @@
{
struct hrtimer_sleeper timeout, *to = NULL;
struct futex_hash_bucket *hb;
- u32 uval;
struct futex_q q;
int res, ret;
@@ -1909,16 +1926,9 @@
return ret != -EINTR ? ret : -ERESTARTNOINTR;
uaddr_faulted:
- /*
- * We have to r/w *(int __user *)uaddr, and we have to modify it
- * atomically. Therefore, if we continue to fault after get_user()
- * below, we need to handle the fault ourselves, while still holding
- * the mmap_sem. This can occur if the uaddr is under contention as
- * we have to drop the mmap_sem in order to call get_user().
- */
queue_unlock(&q, hb);
- ret = get_user(uval, uaddr);
+ ret = fault_in_user_writeable(uaddr);
if (ret)
goto out_put_key;
@@ -2013,17 +2023,10 @@
return ret;
pi_faulted:
- /*
- * We have to r/w *(int __user *)uaddr, and we have to modify it
- * atomically. Therefore, if we continue to fault after get_user()
- * below, we need to handle the fault ourselves, while still holding
- * the mmap_sem. This can occur if the uaddr is under contention as
- * we have to drop the mmap_sem in order to call get_user().
- */
spin_unlock(&hb->lock);
put_futex_key(fshared, &key);
- ret = get_user(uval, uaddr);
+ ret = fault_in_user_writeable(uaddr);
if (!ret)
goto retry;
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 23067ab..4c32b1a 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -340,8 +340,6 @@
bool "Kernel memory leak detector"
depends on DEBUG_KERNEL && EXPERIMENTAL && (X86 || ARM) && \
!MEMORY_HOTPLUG
- select DEBUG_SLAB if SLAB
- select SLUB_DEBUG if SLUB
select DEBUG_FS if SYSFS
select STACKTRACE if STACKTRACE_SUPPORT
select KALLSYMS
@@ -355,6 +353,9 @@
allocations. See Documentation/kmemleak.txt for more
details.
+ Enabling DEBUG_SLAB or SLUB_DEBUG may increase the chances
+ of finding leaks due to the slab objects poisoning.
+
In order to access the kmemleak file, debugfs needs to be
mounted (usually at /sys/kernel/debug).
diff --git a/lib/checksum.c b/lib/checksum.c
index 12e5a1c..b2e2fd4 100644
--- a/lib/checksum.c
+++ b/lib/checksum.c
@@ -55,7 +55,11 @@
goto out;
odd = 1 & (unsigned long) buff;
if (odd) {
+#ifdef __LITTLE_ENDIAN
result = *buff;
+#else
+ result += (*buff << 8);
+#endif
len--;
buff++;
}
@@ -71,7 +75,7 @@
if (count) {
unsigned long carry = 0;
do {
- unsigned long w = *(unsigned long *) buff;
+ unsigned long w = *(unsigned int *) buff;
count--;
buff += 4;
result += carry;
@@ -87,7 +91,11 @@
}
}
if (len & 1)
+#ifdef __LITTLE_ENDIAN
+ result += *buff;
+#else
result += (*buff << 8);
+#endif
result = from32to16(result);
if (odd)
result = ((result >> 8) & 0xff) | ((result & 0xff) << 8);
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index a56e6f3..d0351e3 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -1985,7 +1985,7 @@
}
static int hugetlb_no_page(struct mm_struct *mm, struct vm_area_struct *vma,
- unsigned long address, pte_t *ptep, int write_access)
+ unsigned long address, pte_t *ptep, unsigned int flags)
{
struct hstate *h = hstate_vma(vma);
int ret = VM_FAULT_SIGBUS;
@@ -2053,7 +2053,7 @@
* any allocations necessary to record that reservation occur outside
* the spinlock.
*/
- if (write_access && !(vma->vm_flags & VM_SHARED))
+ if ((flags & FAULT_FLAG_WRITE) && !(vma->vm_flags & VM_SHARED))
if (vma_needs_reservation(h, vma, address) < 0) {
ret = VM_FAULT_OOM;
goto backout_unlocked;
@@ -2072,7 +2072,7 @@
&& (vma->vm_flags & VM_SHARED)));
set_huge_pte_at(mm, address, ptep, new_pte);
- if (write_access && !(vma->vm_flags & VM_SHARED)) {
+ if ((flags & FAULT_FLAG_WRITE) && !(vma->vm_flags & VM_SHARED)) {
/* Optimization, do the COW without a second fault */
ret = hugetlb_cow(mm, vma, address, ptep, new_pte, page);
}
@@ -2091,7 +2091,7 @@
}
int hugetlb_fault(struct mm_struct *mm, struct vm_area_struct *vma,
- unsigned long address, int write_access)
+ unsigned long address, unsigned int flags)
{
pte_t *ptep;
pte_t entry;
@@ -2112,7 +2112,7 @@
mutex_lock(&hugetlb_instantiation_mutex);
entry = huge_ptep_get(ptep);
if (huge_pte_none(entry)) {
- ret = hugetlb_no_page(mm, vma, address, ptep, write_access);
+ ret = hugetlb_no_page(mm, vma, address, ptep, flags);
goto out_mutex;
}
@@ -2126,7 +2126,7 @@
* page now as it is used to determine if a reservation has been
* consumed.
*/
- if (write_access && !pte_write(entry)) {
+ if ((flags & FAULT_FLAG_WRITE) && !pte_write(entry)) {
if (vma_needs_reservation(h, vma, address) < 0) {
ret = VM_FAULT_OOM;
goto out_mutex;
@@ -2143,7 +2143,7 @@
goto out_page_table_lock;
- if (write_access) {
+ if (flags & FAULT_FLAG_WRITE) {
if (!pte_write(entry)) {
ret = hugetlb_cow(mm, vma, address, ptep, entry,
pagecache_page);
@@ -2152,7 +2152,8 @@
entry = pte_mkdirty(entry);
}
entry = pte_mkyoung(entry);
- if (huge_ptep_set_access_flags(vma, address, ptep, entry, write_access))
+ if (huge_ptep_set_access_flags(vma, address, ptep, entry,
+ flags & FAULT_FLAG_WRITE))
update_mmu_cache(vma, address, entry);
out_page_table_lock:
diff --git a/mm/kmemleak.c b/mm/kmemleak.c
index ec759b6..c96f2c8 100644
--- a/mm/kmemleak.c
+++ b/mm/kmemleak.c
@@ -61,6 +61,8 @@
* structure.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/list.h>
@@ -311,7 +313,7 @@
static void print_referenced(struct kmemleak_object *object)
{
- pr_info("kmemleak: referenced object 0x%08lx (size %zu)\n",
+ pr_info("referenced object 0x%08lx (size %zu)\n",
object->pointer, object->size);
}
@@ -320,7 +322,7 @@
{
int i;
- print_helper(seq, "kmemleak: unreferenced object 0x%08lx (size %zu):\n",
+ print_helper(seq, "unreferenced object 0x%08lx (size %zu):\n",
object->pointer, object->size);
print_helper(seq, " comm \"%s\", pid %d, jiffies %lu\n",
object->comm, object->pid, object->jiffies);
@@ -344,7 +346,7 @@
trace.nr_entries = object->trace_len;
trace.entries = object->trace;
- pr_notice("kmemleak: Object 0x%08lx (size %zu):\n",
+ pr_notice("Object 0x%08lx (size %zu):\n",
object->tree_node.start, object->size);
pr_notice(" comm \"%s\", pid %d, jiffies %lu\n",
object->comm, object->pid, object->jiffies);
@@ -372,7 +374,7 @@
object = prio_tree_entry(node, struct kmemleak_object,
tree_node);
if (!alias && object->pointer != ptr) {
- kmemleak_warn("kmemleak: Found object by alias");
+ kmemleak_warn("Found object by alias");
object = NULL;
}
} else
@@ -467,8 +469,7 @@
object = kmem_cache_alloc(object_cache, gfp & GFP_KMEMLEAK_MASK);
if (!object) {
- kmemleak_stop("kmemleak: Cannot allocate a kmemleak_object "
- "structure\n");
+ kmemleak_stop("Cannot allocate a kmemleak_object structure\n");
return;
}
@@ -527,8 +528,8 @@
if (node != &object->tree_node) {
unsigned long flags;
- kmemleak_stop("kmemleak: Cannot insert 0x%lx into the object "
- "search tree (already existing)\n", ptr);
+ kmemleak_stop("Cannot insert 0x%lx into the object search tree "
+ "(already existing)\n", ptr);
object = lookup_object(ptr, 1);
spin_lock_irqsave(&object->lock, flags);
dump_object_info(object);
@@ -553,7 +554,7 @@
write_lock_irqsave(&kmemleak_lock, flags);
object = lookup_object(ptr, 0);
if (!object) {
- kmemleak_warn("kmemleak: Freeing unknown object at 0x%08lx\n",
+ kmemleak_warn("Freeing unknown object at 0x%08lx\n",
ptr);
write_unlock_irqrestore(&kmemleak_lock, flags);
return;
@@ -588,8 +589,7 @@
object = find_and_get_object(ptr, 0);
if (!object) {
- kmemleak_warn("kmemleak: Graying unknown object at 0x%08lx\n",
- ptr);
+ kmemleak_warn("Graying unknown object at 0x%08lx\n", ptr);
return;
}
@@ -610,8 +610,7 @@
object = find_and_get_object(ptr, 0);
if (!object) {
- kmemleak_warn("kmemleak: Blacking unknown object at 0x%08lx\n",
- ptr);
+ kmemleak_warn("Blacking unknown object at 0x%08lx\n", ptr);
return;
}
@@ -634,21 +633,20 @@
object = find_and_get_object(ptr, 0);
if (!object) {
- kmemleak_warn("kmemleak: Adding scan area to unknown "
- "object at 0x%08lx\n", ptr);
+ kmemleak_warn("Adding scan area to unknown object at 0x%08lx\n",
+ ptr);
return;
}
area = kmem_cache_alloc(scan_area_cache, gfp & GFP_KMEMLEAK_MASK);
if (!area) {
- kmemleak_warn("kmemleak: Cannot allocate a scan area\n");
+ kmemleak_warn("Cannot allocate a scan area\n");
goto out;
}
spin_lock_irqsave(&object->lock, flags);
if (offset + length > object->size) {
- kmemleak_warn("kmemleak: Scan area larger than object "
- "0x%08lx\n", ptr);
+ kmemleak_warn("Scan area larger than object 0x%08lx\n", ptr);
dump_object_info(object);
kmem_cache_free(scan_area_cache, area);
goto out_unlock;
@@ -677,8 +675,7 @@
object = find_and_get_object(ptr, 0);
if (!object) {
- kmemleak_warn("kmemleak: Not scanning unknown object at "
- "0x%08lx\n", ptr);
+ kmemleak_warn("Not scanning unknown object at 0x%08lx\n", ptr);
return;
}
@@ -699,7 +696,7 @@
struct early_log *log;
if (crt_early_log >= ARRAY_SIZE(early_log)) {
- kmemleak_stop("kmemleak: Early log buffer exceeded\n");
+ kmemleak_stop("Early log buffer exceeded\n");
return;
}
@@ -966,7 +963,7 @@
* 1 reference to any object at this point.
*/
if (atomic_read(&object->use_count) > 1) {
- pr_debug("kmemleak: object->use_count = %d\n",
+ pr_debug("object->use_count = %d\n",
atomic_read(&object->use_count));
dump_object_info(object);
}
@@ -1062,7 +1059,7 @@
{
static int first_run = 1;
- pr_info("kmemleak: Automatic memory scanning thread started\n");
+ pr_info("Automatic memory scanning thread started\n");
/*
* Wait before the first scan to allow the system to fully initialize.
@@ -1108,7 +1105,7 @@
timeout = schedule_timeout_interruptible(timeout);
}
- pr_info("kmemleak: Automatic memory scanning thread ended\n");
+ pr_info("Automatic memory scanning thread ended\n");
return 0;
}
@@ -1123,7 +1120,7 @@
return;
scan_thread = kthread_run(kmemleak_scan_thread, NULL, "kmemleak");
if (IS_ERR(scan_thread)) {
- pr_warning("kmemleak: Failed to create the scan thread\n");
+ pr_warning("Failed to create the scan thread\n");
scan_thread = NULL;
}
}
@@ -1367,7 +1364,7 @@
cleanup_thread = kthread_run(kmemleak_cleanup_thread, NULL,
"kmemleak-clean");
if (IS_ERR(cleanup_thread))
- pr_warning("kmemleak: Failed to create the clean-up thread\n");
+ pr_warning("Failed to create the clean-up thread\n");
}
/*
@@ -1488,8 +1485,7 @@
dentry = debugfs_create_file("kmemleak", S_IRUGO, NULL, NULL,
&kmemleak_fops);
if (!dentry)
- pr_warning("kmemleak: Failed to create the debugfs kmemleak "
- "file\n");
+ pr_warning("Failed to create the debugfs kmemleak file\n");
mutex_lock(&kmemleak_mutex);
start_scan_thread();
mutex_unlock(&kmemleak_mutex);
diff --git a/mm/memory.c b/mm/memory.c
index 98bcb90..6521619 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -1207,8 +1207,8 @@
int __get_user_pages(struct task_struct *tsk, struct mm_struct *mm,
- unsigned long start, int len, int flags,
- struct page **pages, struct vm_area_struct **vmas)
+ unsigned long start, int nr_pages, int flags,
+ struct page **pages, struct vm_area_struct **vmas)
{
int i;
unsigned int vm_flags = 0;
@@ -1217,7 +1217,7 @@
int ignore = !!(flags & GUP_FLAGS_IGNORE_VMA_PERMISSIONS);
int ignore_sigkill = !!(flags & GUP_FLAGS_IGNORE_SIGKILL);
- if (len <= 0)
+ if (nr_pages <= 0)
return 0;
/*
* Require read or write permissions.
@@ -1269,7 +1269,7 @@
vmas[i] = gate_vma;
i++;
start += PAGE_SIZE;
- len--;
+ nr_pages--;
continue;
}
@@ -1280,7 +1280,7 @@
if (is_vm_hugetlb_page(vma)) {
i = follow_hugetlb_page(mm, vma, pages, vmas,
- &start, &len, i, write);
+ &start, &nr_pages, i, write);
continue;
}
@@ -1311,8 +1311,10 @@
while (!(page = follow_page(vma, start, foll_flags))) {
int ret;
- /* FOLL_WRITE matches FAULT_FLAG_WRITE! */
- ret = handle_mm_fault(mm, vma, start, foll_flags & FOLL_WRITE);
+ ret = handle_mm_fault(mm, vma, start,
+ (foll_flags & FOLL_WRITE) ?
+ FAULT_FLAG_WRITE : 0);
+
if (ret & VM_FAULT_ERROR) {
if (ret & VM_FAULT_OOM)
return i ? i : -ENOMEM;
@@ -1355,9 +1357,9 @@
vmas[i] = vma;
i++;
start += PAGE_SIZE;
- len--;
- } while (len && start < vma->vm_end);
- } while (len);
+ nr_pages--;
+ } while (nr_pages && start < vma->vm_end);
+ } while (nr_pages);
return i;
}
@@ -1366,7 +1368,7 @@
* @tsk: task_struct of target task
* @mm: mm_struct of target mm
* @start: starting user address
- * @len: number of pages from start to pin
+ * @nr_pages: number of pages from start to pin
* @write: whether pages will be written to by the caller
* @force: whether to force write access even if user mapping is
* readonly. This will result in the page being COWed even
@@ -1378,7 +1380,7 @@
* Or NULL if the caller does not require them.
*
* Returns number of pages pinned. This may be fewer than the number
- * requested. If len is 0 or negative, returns 0. If no pages
+ * requested. If nr_pages is 0 or negative, returns 0. If no pages
* were pinned, returns -errno. Each page returned must be released
* with a put_page() call when it is finished with. vmas will only
* remain valid while mmap_sem is held.
@@ -1412,7 +1414,7 @@
* See also get_user_pages_fast, for performance critical applications.
*/
int get_user_pages(struct task_struct *tsk, struct mm_struct *mm,
- unsigned long start, int len, int write, int force,
+ unsigned long start, int nr_pages, int write, int force,
struct page **pages, struct vm_area_struct **vmas)
{
int flags = 0;
@@ -1422,9 +1424,7 @@
if (force)
flags |= GUP_FLAGS_FORCE;
- return __get_user_pages(tsk, mm,
- start, len, flags,
- pages, vmas);
+ return __get_user_pages(tsk, mm, start, nr_pages, flags, pages, vmas);
}
EXPORT_SYMBOL(get_user_pages);
@@ -2517,7 +2517,7 @@
delayacct_set_flag(DELAYACCT_PF_SWAPIN);
page = lookup_swap_cache(entry);
if (!page) {
- grab_swap_token(); /* Contend for token _before_ read-in */
+ grab_swap_token(mm); /* Contend for token _before_ read-in */
page = swapin_readahead(entry,
GFP_HIGHUSER_MOVABLE, vma, address);
if (!page) {
diff --git a/mm/nommu.c b/mm/nommu.c
index 2fd2ad5..bf0cc76 100644
--- a/mm/nommu.c
+++ b/mm/nommu.c
@@ -173,8 +173,8 @@
}
int __get_user_pages(struct task_struct *tsk, struct mm_struct *mm,
- unsigned long start, int len, int flags,
- struct page **pages, struct vm_area_struct **vmas)
+ unsigned long start, int nr_pages, int flags,
+ struct page **pages, struct vm_area_struct **vmas)
{
struct vm_area_struct *vma;
unsigned long vm_flags;
@@ -189,7 +189,7 @@
vm_flags = write ? (VM_WRITE | VM_MAYWRITE) : (VM_READ | VM_MAYREAD);
vm_flags &= force ? (VM_MAYREAD | VM_MAYWRITE) : (VM_READ | VM_WRITE);
- for (i = 0; i < len; i++) {
+ for (i = 0; i < nr_pages; i++) {
vma = find_vma(mm, start);
if (!vma)
goto finish_or_fault;
@@ -224,7 +224,7 @@
* - don't permit access to VMAs that don't support it, such as I/O mappings
*/
int get_user_pages(struct task_struct *tsk, struct mm_struct *mm,
- unsigned long start, int len, int write, int force,
+ unsigned long start, int nr_pages, int write, int force,
struct page **pages, struct vm_area_struct **vmas)
{
int flags = 0;
@@ -234,9 +234,7 @@
if (force)
flags |= GUP_FLAGS_FORCE;
- return __get_user_pages(tsk, mm,
- start, len, flags,
- pages, vmas);
+ return __get_user_pages(tsk, mm, start, nr_pages, flags, pages, vmas);
}
EXPORT_SYMBOL(get_user_pages);
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 30d5093..5d714f8 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -1153,10 +1153,10 @@
* properly detect and handle allocation failures.
*
* We most definitely don't want callers attempting to
- * allocate greater than single-page units with
+ * allocate greater than order-1 page units with
* __GFP_NOFAIL.
*/
- WARN_ON_ONCE(order > 0);
+ WARN_ON_ONCE(order > 1);
}
spin_lock_irqsave(&zone->lock, flags);
page = __rmqueue(zone, order, migratetype);
@@ -3026,7 +3026,7 @@
if (dzone == zone)
break;
kfree(zone_pcp(dzone, cpu));
- zone_pcp(dzone, cpu) = NULL;
+ zone_pcp(dzone, cpu) = &boot_pageset[cpu];
}
return -ENOMEM;
}
@@ -3041,7 +3041,7 @@
/* Free per_cpu_pageset if it is slab allocated */
if (pset != &boot_pageset[cpu])
kfree(pset);
- zone_pcp(zone, cpu) = NULL;
+ zone_pcp(zone, cpu) = &boot_pageset[cpu];
}
}
@@ -4659,7 +4659,7 @@
ret = proc_dointvec_minmax(table, write, file, buffer, length, ppos);
if (!write || (ret == -EINVAL))
return ret;
- for_each_zone(zone) {
+ for_each_populated_zone(zone) {
for_each_online_cpu(cpu) {
unsigned long high;
high = zone->present_pages / percpu_pagelist_fraction;
diff --git a/mm/shmem.c b/mm/shmem.c
index e89d7ec..d713239 100644
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -1558,6 +1558,7 @@
spin_lock_init(&info->lock);
info->flags = flags & VM_NORESERVE;
INIT_LIST_HEAD(&info->swaplist);
+ cache_no_acl(inode);
switch (mode & S_IFMT) {
default:
@@ -2388,7 +2389,6 @@
/* only struct inode is valid if it's an inline symlink */
mpol_free_shared_policy(&SHMEM_I(inode)->policy);
}
- shmem_acl_destroy_inode(inode);
kmem_cache_free(shmem_inode_cachep, SHMEM_I(inode));
}
@@ -2397,10 +2397,6 @@
struct shmem_inode_info *p = (struct shmem_inode_info *) foo;
inode_init_once(&p->vfs_inode);
-#ifdef CONFIG_TMPFS_POSIX_ACL
- p->i_acl = NULL;
- p->i_default_acl = NULL;
-#endif
}
static int init_inodecache(void)
diff --git a/mm/shmem_acl.c b/mm/shmem_acl.c
index 8e5aadd..606a8e7 100644
--- a/mm/shmem_acl.c
+++ b/mm/shmem_acl.c
@@ -22,11 +22,11 @@
spin_lock(&inode->i_lock);
switch(type) {
case ACL_TYPE_ACCESS:
- acl = posix_acl_dup(SHMEM_I(inode)->i_acl);
+ acl = posix_acl_dup(inode->i_acl);
break;
case ACL_TYPE_DEFAULT:
- acl = posix_acl_dup(SHMEM_I(inode)->i_default_acl);
+ acl = posix_acl_dup(inode->i_default_acl);
break;
}
spin_unlock(&inode->i_lock);
@@ -45,13 +45,13 @@
spin_lock(&inode->i_lock);
switch(type) {
case ACL_TYPE_ACCESS:
- free = SHMEM_I(inode)->i_acl;
- SHMEM_I(inode)->i_acl = posix_acl_dup(acl);
+ free = inode->i_acl;
+ inode->i_acl = posix_acl_dup(acl);
break;
case ACL_TYPE_DEFAULT:
- free = SHMEM_I(inode)->i_default_acl;
- SHMEM_I(inode)->i_default_acl = posix_acl_dup(acl);
+ free = inode->i_default_acl;
+ inode->i_default_acl = posix_acl_dup(acl);
break;
}
spin_unlock(&inode->i_lock);
@@ -155,23 +155,6 @@
}
/**
- * shmem_acl_destroy_inode - destroy acls hanging off the in-memory inode
- *
- * This is done before destroying the actual inode.
- */
-
-void
-shmem_acl_destroy_inode(struct inode *inode)
-{
- if (SHMEM_I(inode)->i_acl)
- posix_acl_release(SHMEM_I(inode)->i_acl);
- SHMEM_I(inode)->i_acl = NULL;
- if (SHMEM_I(inode)->i_default_acl)
- posix_acl_release(SHMEM_I(inode)->i_default_acl);
- SHMEM_I(inode)->i_default_acl = NULL;
-}
-
-/**
* shmem_check_acl - check_acl() callback for generic_permission()
*/
static int
diff --git a/mm/slub.c b/mm/slub.c
index ce62b77..819f056 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -1085,11 +1085,17 @@
{
struct page *page;
struct kmem_cache_order_objects oo = s->oo;
+ gfp_t alloc_gfp;
flags |= s->allocflags;
- page = alloc_slab_page(flags | __GFP_NOWARN | __GFP_NORETRY, node,
- oo);
+ /*
+ * Let the initial higher-order allocation fail under memory pressure
+ * so we fall-back to the minimum order allocation.
+ */
+ alloc_gfp = (flags | __GFP_NOWARN | __GFP_NORETRY) & ~__GFP_NOFAIL;
+
+ page = alloc_slab_page(alloc_gfp, node, oo);
if (unlikely(!page)) {
oo = s->min;
/*
diff --git a/mm/thrash.c b/mm/thrash.c
index c4c5205..2372d4e 100644
--- a/mm/thrash.c
+++ b/mm/thrash.c
@@ -26,47 +26,45 @@
struct mm_struct *swap_token_mm;
static unsigned int global_faults;
-void grab_swap_token(void)
+void grab_swap_token(struct mm_struct *mm)
{
int current_interval;
global_faults++;
- current_interval = global_faults - current->mm->faultstamp;
+ current_interval = global_faults - mm->faultstamp;
if (!spin_trylock(&swap_token_lock))
return;
/* First come first served */
if (swap_token_mm == NULL) {
- current->mm->token_priority = current->mm->token_priority + 2;
- swap_token_mm = current->mm;
+ mm->token_priority = mm->token_priority + 2;
+ swap_token_mm = mm;
goto out;
}
- if (current->mm != swap_token_mm) {
- if (current_interval < current->mm->last_interval)
- current->mm->token_priority++;
+ if (mm != swap_token_mm) {
+ if (current_interval < mm->last_interval)
+ mm->token_priority++;
else {
- if (likely(current->mm->token_priority > 0))
- current->mm->token_priority--;
+ if (likely(mm->token_priority > 0))
+ mm->token_priority--;
}
/* Check if we deserve the token */
- if (current->mm->token_priority >
- swap_token_mm->token_priority) {
- current->mm->token_priority += 2;
- swap_token_mm = current->mm;
+ if (mm->token_priority > swap_token_mm->token_priority) {
+ mm->token_priority += 2;
+ swap_token_mm = mm;
}
} else {
/* Token holder came in again! */
- current->mm->token_priority += 2;
+ mm->token_priority += 2;
}
out:
- current->mm->faultstamp = global_faults;
- current->mm->last_interval = current_interval;
+ mm->faultstamp = global_faults;
+ mm->last_interval = current_interval;
spin_unlock(&swap_token_lock);
-return;
}
/* Called on process exit. */
diff --git a/mm/vmscan.c b/mm/vmscan.c
index e8fa2d9..5415526 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -932,7 +932,7 @@
continue;
if (__isolate_lru_page(cursor_page, mode, file) == 0) {
list_move(&cursor_page->lru, dst);
- mem_cgroup_del_lru(page);
+ mem_cgroup_del_lru(cursor_page);
nr_taken++;
scan++;
}
diff --git a/net/ax25/ax25_in.c b/net/ax25/ax25_in.c
index 5f1d210..de56d39 100644
--- a/net/ax25/ax25_in.c
+++ b/net/ax25/ax25_in.c
@@ -437,8 +437,7 @@
int ax25_kiss_rcv(struct sk_buff *skb, struct net_device *dev,
struct packet_type *ptype, struct net_device *orig_dev)
{
- skb->sk = NULL; /* Initially we don't know who it's for */
- skb->destructor = NULL; /* Who initializes this, dammit?! */
+ skb_orphan(skb);
if (!net_eq(dev_net(dev), &init_net)) {
kfree_skb(skb);
diff --git a/net/core/dev.c b/net/core/dev.c
index baf2dc1..60b5728 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -2310,8 +2310,6 @@
if (!skb)
goto out;
- skb_orphan(skb);
-
type = skb->protocol;
list_for_each_entry_rcu(ptype,
&ptype_base[ntohs(type) & PTYPE_HASH_MASK], list) {
diff --git a/net/dccp/ipv6.c b/net/dccp/ipv6.c
index 05ea744..3e70faa 100644
--- a/net/dccp/ipv6.c
+++ b/net/dccp/ipv6.c
@@ -85,7 +85,7 @@
}
static void dccp_v6_err(struct sk_buff *skb, struct inet6_skb_parm *opt,
- int type, int code, int offset, __be32 info)
+ u8 type, u8 code, int offset, __be32 info)
{
struct ipv6hdr *hdr = (struct ipv6hdr *)skb->data;
const struct dccp_hdr *dh = (struct dccp_hdr *)(skb->data + offset);
diff --git a/net/ipv4/route.c b/net/ipv4/route.c
index 65b3a8b..278f46f 100644
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -1093,8 +1093,27 @@
* If we drop it here, the callers have no way to resolve routes
* when we're not caching. Instead, just point *rp at rt, so
* the caller gets a single use out of the route
+ * Note that we do rt_free on this new route entry, so that
+ * once its refcount hits zero, we are still able to reap it
+ * (Thanks Alexey)
+ * Note also the rt_free uses call_rcu. We don't actually
+ * need rcu protection here, this is just our path to get
+ * on the route gc list.
*/
- goto report_and_exit;
+
+ if (rt->rt_type == RTN_UNICAST || rt->fl.iif == 0) {
+ int err = arp_bind_neighbour(&rt->u.dst);
+ if (err) {
+ if (net_ratelimit())
+ printk(KERN_WARNING
+ "Neighbour table failure & not caching routes.\n");
+ rt_drop(rt);
+ return err;
+ }
+ }
+
+ rt_free(rt);
+ goto skip_hashing;
}
rthp = &rt_hash_table[hash].chain;
@@ -1211,7 +1230,8 @@
#if RT_CACHE_DEBUG >= 2
if (rt->u.dst.rt_next) {
struct rtable *trt;
- printk(KERN_DEBUG "rt_cache @%02x: %pI4", hash, &rt->rt_dst);
+ printk(KERN_DEBUG "rt_cache @%02x: %pI4",
+ hash, &rt->rt_dst);
for (trt = rt->u.dst.rt_next; trt; trt = trt->u.dst.rt_next)
printk(" . %pI4", &trt->rt_dst);
printk("\n");
@@ -1226,7 +1246,7 @@
spin_unlock_bh(rt_hash_lock_addr(hash));
-report_and_exit:
+skip_hashing:
if (rp)
*rp = rt;
else
diff --git a/net/ipv6/ah6.c b/net/ipv6/ah6.c
index 52449f7..86f42a2 100644
--- a/net/ipv6/ah6.c
+++ b/net/ipv6/ah6.c
@@ -405,7 +405,7 @@
}
static void ah6_err(struct sk_buff *skb, struct inet6_skb_parm *opt,
- int type, int code, int offset, __be32 info)
+ u8 type, u8 code, int offset, __be32 info)
{
struct net *net = dev_net(skb->dev);
struct ipv6hdr *iph = (struct ipv6hdr*)skb->data;
diff --git a/net/ipv6/esp6.c b/net/ipv6/esp6.c
index c2f2501..678bb95 100644
--- a/net/ipv6/esp6.c
+++ b/net/ipv6/esp6.c
@@ -354,7 +354,7 @@
}
static void esp6_err(struct sk_buff *skb, struct inet6_skb_parm *opt,
- int type, int code, int offset, __be32 info)
+ u8 type, u8 code, int offset, __be32 info)
{
struct net *net = dev_net(skb->dev);
struct ipv6hdr *iph = (struct ipv6hdr*)skb->data;
diff --git a/net/ipv6/icmp.c b/net/ipv6/icmp.c
index 36dff88..eab62a7 100644
--- a/net/ipv6/icmp.c
+++ b/net/ipv6/icmp.c
@@ -117,7 +117,7 @@
/*
* Slightly more convenient version of icmpv6_send.
*/
-void icmpv6_param_prob(struct sk_buff *skb, int code, int pos)
+void icmpv6_param_prob(struct sk_buff *skb, u8 code, int pos)
{
icmpv6_send(skb, ICMPV6_PARAMPROB, code, pos, skb->dev);
kfree_skb(skb);
@@ -161,7 +161,7 @@
/*
* Check the ICMP output rate limit
*/
-static inline int icmpv6_xrlim_allow(struct sock *sk, int type,
+static inline int icmpv6_xrlim_allow(struct sock *sk, u8 type,
struct flowi *fl)
{
struct dst_entry *dst;
@@ -305,7 +305,7 @@
/*
* Send an ICMP message in response to a packet in error
*/
-void icmpv6_send(struct sk_buff *skb, int type, int code, __u32 info,
+void icmpv6_send(struct sk_buff *skb, u8 type, u8 code, __u32 info,
struct net_device *dev)
{
struct net *net = dev_net(skb->dev);
@@ -590,7 +590,7 @@
icmpv6_xmit_unlock(sk);
}
-static void icmpv6_notify(struct sk_buff *skb, int type, int code, __be32 info)
+static void icmpv6_notify(struct sk_buff *skb, u8 type, u8 code, __be32 info)
{
struct inet6_protocol *ipprot;
int inner_offset;
@@ -643,7 +643,7 @@
struct in6_addr *saddr, *daddr;
struct ipv6hdr *orig_hdr;
struct icmp6hdr *hdr;
- int type;
+ u8 type;
if (!xfrm6_policy_check(NULL, XFRM_POLICY_IN, skb)) {
struct sec_path *sp = skb_sec_path(skb);
@@ -914,7 +914,7 @@
},
};
-int icmpv6_err_convert(int type, int code, int *err)
+int icmpv6_err_convert(u8 type, u8 code, int *err)
{
int fatal = 0;
diff --git a/net/ipv6/ip6_tunnel.c b/net/ipv6/ip6_tunnel.c
index 404d16a..51f410e 100644
--- a/net/ipv6/ip6_tunnel.c
+++ b/net/ipv6/ip6_tunnel.c
@@ -394,13 +394,13 @@
static int
ip6_tnl_err(struct sk_buff *skb, __u8 ipproto, struct inet6_skb_parm *opt,
- int *type, int *code, int *msg, __u32 *info, int offset)
+ u8 *type, u8 *code, int *msg, __u32 *info, int offset)
{
struct ipv6hdr *ipv6h = (struct ipv6hdr *) skb->data;
struct ip6_tnl *t;
int rel_msg = 0;
- int rel_type = ICMPV6_DEST_UNREACH;
- int rel_code = ICMPV6_ADDR_UNREACH;
+ u8 rel_type = ICMPV6_DEST_UNREACH;
+ u8 rel_code = ICMPV6_ADDR_UNREACH;
__u32 rel_info = 0;
__u16 len;
int err = -ENOENT;
@@ -488,11 +488,11 @@
static int
ip4ip6_err(struct sk_buff *skb, struct inet6_skb_parm *opt,
- int type, int code, int offset, __be32 info)
+ u8 type, u8 code, int offset, __be32 info)
{
int rel_msg = 0;
- int rel_type = type;
- int rel_code = code;
+ u8 rel_type = type;
+ u8 rel_code = code;
__u32 rel_info = ntohl(info);
int err;
struct sk_buff *skb2;
@@ -586,11 +586,11 @@
static int
ip6ip6_err(struct sk_buff *skb, struct inet6_skb_parm *opt,
- int type, int code, int offset, __be32 info)
+ u8 type, u8 code, int offset, __be32 info)
{
int rel_msg = 0;
- int rel_type = type;
- int rel_code = code;
+ u8 rel_type = type;
+ u8 rel_code = code;
__u32 rel_info = ntohl(info);
int err;
diff --git a/net/ipv6/ipcomp6.c b/net/ipv6/ipcomp6.c
index 3a0b3be..79c172f 100644
--- a/net/ipv6/ipcomp6.c
+++ b/net/ipv6/ipcomp6.c
@@ -51,7 +51,7 @@
#include <linux/mutex.h>
static void ipcomp6_err(struct sk_buff *skb, struct inet6_skb_parm *opt,
- int type, int code, int offset, __be32 info)
+ u8 type, u8 code, int offset, __be32 info)
{
__be32 spi;
struct ipv6hdr *iph = (struct ipv6hdr*)skb->data;
diff --git a/net/ipv6/mip6.c b/net/ipv6/mip6.c
index f995e19..f797e8c 100644
--- a/net/ipv6/mip6.c
+++ b/net/ipv6/mip6.c
@@ -54,7 +54,7 @@
return data + padlen;
}
-static inline void mip6_param_prob(struct sk_buff *skb, int code, int pos)
+static inline void mip6_param_prob(struct sk_buff *skb, u8 code, int pos)
{
icmpv6_send(skb, ICMPV6_PARAMPROB, code, pos, skb->dev);
}
diff --git a/net/ipv6/raw.c b/net/ipv6/raw.c
index 8b0b6f9..d6c3c1c 100644
--- a/net/ipv6/raw.c
+++ b/net/ipv6/raw.c
@@ -310,7 +310,7 @@
static void rawv6_err(struct sock *sk, struct sk_buff *skb,
struct inet6_skb_parm *opt,
- int type, int code, int offset, __be32 info)
+ u8 type, u8 code, int offset, __be32 info)
{
struct inet_sock *inet = inet_sk(sk);
struct ipv6_pinfo *np = inet6_sk(sk);
@@ -343,7 +343,7 @@
}
void raw6_icmp_error(struct sk_buff *skb, int nexthdr,
- int type, int code, int inner_offset, __be32 info)
+ u8 type, u8 code, int inner_offset, __be32 info)
{
struct sock *sk;
int hash;
diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index 658293e..1473ee0 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -1865,7 +1865,7 @@
* Drop the packet on the floor
*/
-static int ip6_pkt_drop(struct sk_buff *skb, int code, int ipstats_mib_noroutes)
+static int ip6_pkt_drop(struct sk_buff *skb, u8 code, int ipstats_mib_noroutes)
{
int type;
struct dst_entry *dst = skb_dst(skb);
diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c
index 53b6a41..58810c6 100644
--- a/net/ipv6/tcp_ipv6.c
+++ b/net/ipv6/tcp_ipv6.c
@@ -317,7 +317,7 @@
}
static void tcp_v6_err(struct sk_buff *skb, struct inet6_skb_parm *opt,
- int type, int code, int offset, __be32 info)
+ u8 type, u8 code, int offset, __be32 info)
{
struct ipv6hdr *hdr = (struct ipv6hdr*)skb->data;
const struct tcphdr *th = (struct tcphdr *)(skb->data+offset);
diff --git a/net/ipv6/tunnel6.c b/net/ipv6/tunnel6.c
index 669f280..633ad789 100644
--- a/net/ipv6/tunnel6.c
+++ b/net/ipv6/tunnel6.c
@@ -124,7 +124,7 @@
}
static void tunnel6_err(struct sk_buff *skb, struct inet6_skb_parm *opt,
- int type, int code, int offset, __be32 info)
+ u8 type, u8 code, int offset, __be32 info)
{
struct xfrm6_tunnel *handler;
diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c
index 023beda..33b59bd 100644
--- a/net/ipv6/udp.c
+++ b/net/ipv6/udp.c
@@ -312,7 +312,7 @@
}
void __udp6_lib_err(struct sk_buff *skb, struct inet6_skb_parm *opt,
- int type, int code, int offset, __be32 info,
+ u8 type, u8 code, int offset, __be32 info,
struct udp_table *udptable)
{
struct ipv6_pinfo *np;
@@ -346,8 +346,8 @@
}
static __inline__ void udpv6_err(struct sk_buff *skb,
- struct inet6_skb_parm *opt, int type,
- int code, int offset, __be32 info )
+ struct inet6_skb_parm *opt, u8 type,
+ u8 code, int offset, __be32 info )
{
__udp6_lib_err(skb, opt, type, code, offset, info, &udp_table);
}
diff --git a/net/ipv6/udp_impl.h b/net/ipv6/udp_impl.h
index 2377920..6bb3034 100644
--- a/net/ipv6/udp_impl.h
+++ b/net/ipv6/udp_impl.h
@@ -9,7 +9,7 @@
extern int __udp6_lib_rcv(struct sk_buff *, struct udp_table *, int );
extern void __udp6_lib_err(struct sk_buff *, struct inet6_skb_parm *,
- int , int , int , __be32 , struct udp_table *);
+ u8 , u8 , int , __be32 , struct udp_table *);
extern int udp_v6_get_port(struct sock *sk, unsigned short snum);
diff --git a/net/ipv6/udplite.c b/net/ipv6/udplite.c
index ba162a8..4818c48 100644
--- a/net/ipv6/udplite.c
+++ b/net/ipv6/udplite.c
@@ -20,7 +20,7 @@
static void udplitev6_err(struct sk_buff *skb,
struct inet6_skb_parm *opt,
- int type, int code, int offset, __be32 info)
+ u8 type, u8 code, int offset, __be32 info)
{
__udp6_lib_err(skb, opt, type, code, offset, info, &udplite_table);
}
diff --git a/net/ipv6/xfrm6_tunnel.c b/net/ipv6/xfrm6_tunnel.c
index 80193db..81a95c0 100644
--- a/net/ipv6/xfrm6_tunnel.c
+++ b/net/ipv6/xfrm6_tunnel.c
@@ -262,7 +262,7 @@
}
static int xfrm6_tunnel_err(struct sk_buff *skb, struct inet6_skb_parm *opt,
- int type, int code, int offset, __be32 info)
+ u8 type, u8 code, int offset, __be32 info)
{
/* xfrm6_tunnel native err handling */
switch (type) {
diff --git a/net/irda/af_irda.c b/net/irda/af_irda.c
index 5922feb..cb762c8 100644
--- a/net/irda/af_irda.c
+++ b/net/irda/af_irda.c
@@ -913,9 +913,6 @@
/* Clean up the original one to keep it in listen state */
irttp_listen(self->tsap);
- /* Wow ! What is that ? Jean II */
- skb->sk = NULL;
- skb->destructor = NULL;
kfree_skb(skb);
sk->sk_ack_backlog--;
diff --git a/net/irda/ircomm/ircomm_lmp.c b/net/irda/ircomm/ircomm_lmp.c
index 67c99d2..7ba9661 100644
--- a/net/irda/ircomm/ircomm_lmp.c
+++ b/net/irda/ircomm/ircomm_lmp.c
@@ -196,6 +196,7 @@
/* Don't forget to refcount it - see ircomm_tty_do_softint() */
skb_get(skb);
+ skb_orphan(skb);
skb->destructor = ircomm_lmp_flow_control;
if ((self->pkt_count++ > 7) && (self->flow_status == FLOW_START)) {
diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c
index 5f72b94..7508f11 100644
--- a/net/netfilter/nf_conntrack_core.c
+++ b/net/netfilter/nf_conntrack_core.c
@@ -335,7 +335,8 @@
h = __nf_conntrack_find(net, tuple);
if (h) {
ct = nf_ct_tuplehash_to_ctrack(h);
- if (unlikely(!atomic_inc_not_zero(&ct->ct_general.use)))
+ if (unlikely(nf_ct_is_dying(ct) ||
+ !atomic_inc_not_zero(&ct->ct_general.use)))
h = NULL;
else {
if (unlikely(!nf_ct_tuple_equal(tuple, &h->tuple))) {
@@ -425,7 +426,6 @@
/* Remove from unconfirmed list */
hlist_nulls_del_rcu(&ct->tuplehash[IP_CT_DIR_ORIGINAL].hnnode);
- __nf_conntrack_hash_insert(ct, hash, repl_hash);
/* Timer relative to confirmation time, not original
setting time, otherwise we'd get timer wrap in
weird delay cases. */
@@ -433,8 +433,16 @@
add_timer(&ct->timeout);
atomic_inc(&ct->ct_general.use);
set_bit(IPS_CONFIRMED_BIT, &ct->status);
+
+ /* Since the lookup is lockless, hash insertion must be done after
+ * starting the timer and setting the CONFIRMED bit. The RCU barriers
+ * guarantee that no other CPU can find the conntrack before the above
+ * stores are visible.
+ */
+ __nf_conntrack_hash_insert(ct, hash, repl_hash);
NF_CT_STAT_INC(net, insert);
spin_unlock_bh(&nf_conntrack_lock);
+
help = nfct_help(ct);
if (help && help->helper)
nf_conntrack_event_cache(IPCT_HELPER, ct);
@@ -503,7 +511,8 @@
cnt++;
}
- if (ct && unlikely(!atomic_inc_not_zero(&ct->ct_general.use)))
+ if (ct && unlikely(nf_ct_is_dying(ct) ||
+ !atomic_inc_not_zero(&ct->ct_general.use)))
ct = NULL;
if (ct || cnt >= NF_CT_EVICTION_RANGE)
break;
@@ -1267,13 +1276,19 @@
return ret;
}
+/*
+ * We need to use special "null" values, not used in hash table
+ */
+#define UNCONFIRMED_NULLS_VAL ((1<<30)+0)
+#define DYING_NULLS_VAL ((1<<30)+1)
+
static int nf_conntrack_init_net(struct net *net)
{
int ret;
atomic_set(&net->ct.count, 0);
- INIT_HLIST_NULLS_HEAD(&net->ct.unconfirmed, 0);
- INIT_HLIST_NULLS_HEAD(&net->ct.dying, 0);
+ INIT_HLIST_NULLS_HEAD(&net->ct.unconfirmed, UNCONFIRMED_NULLS_VAL);
+ INIT_HLIST_NULLS_HEAD(&net->ct.dying, DYING_NULLS_VAL);
net->ct.stat = alloc_percpu(struct ip_conntrack_stat);
if (!net->ct.stat) {
ret = -ENOMEM;
diff --git a/net/netfilter/nf_log.c b/net/netfilter/nf_log.c
index 2fefe14..4e62030 100644
--- a/net/netfilter/nf_log.c
+++ b/net/netfilter/nf_log.c
@@ -47,7 +47,6 @@
mutex_lock(&nf_log_mutex);
if (pf == NFPROTO_UNSPEC) {
- int i;
for (i = NFPROTO_UNSPEC; i < NFPROTO_NUMPROTO; i++)
list_add_tail(&(logger->list[i]), &(nf_loggers_l[i]));
} else {
@@ -216,7 +215,7 @@
#endif /* PROC_FS */
#ifdef CONFIG_SYSCTL
-struct ctl_path nf_log_sysctl_path[] = {
+static struct ctl_path nf_log_sysctl_path[] = {
{ .procname = "net", .ctl_name = CTL_NET, },
{ .procname = "netfilter", .ctl_name = NET_NETFILTER, },
{ .procname = "nf_log", .ctl_name = CTL_UNNUMBERED, },
@@ -228,19 +227,26 @@
static struct ctl_table_header *nf_log_dir_header;
static int nf_log_proc_dostring(ctl_table *table, int write, struct file *filp,
- void *buffer, size_t *lenp, loff_t *ppos)
+ void __user *buffer, size_t *lenp, loff_t *ppos)
{
const struct nf_logger *logger;
+ char buf[NFLOGGER_NAME_LEN];
+ size_t size = *lenp;
int r = 0;
int tindex = (unsigned long)table->extra1;
if (write) {
- if (!strcmp(buffer, "NONE")) {
+ if (size > sizeof(buf))
+ size = sizeof(buf);
+ if (copy_from_user(buf, buffer, size))
+ return -EFAULT;
+
+ if (!strcmp(buf, "NONE")) {
nf_log_unbind_pf(tindex);
return 0;
}
mutex_lock(&nf_log_mutex);
- logger = __find_logger(tindex, buffer);
+ logger = __find_logger(tindex, buf);
if (logger == NULL) {
mutex_unlock(&nf_log_mutex);
return -ENOENT;
diff --git a/net/netfilter/xt_NFQUEUE.c b/net/netfilter/xt_NFQUEUE.c
index 498b451..f28f6a5 100644
--- a/net/netfilter/xt_NFQUEUE.c
+++ b/net/netfilter/xt_NFQUEUE.c
@@ -40,12 +40,12 @@
static u32 hash_v4(const struct sk_buff *skb)
{
const struct iphdr *iph = ip_hdr(skb);
- u32 ipaddr;
+ __be32 ipaddr;
/* packets in either direction go into same queue */
ipaddr = iph->saddr ^ iph->daddr;
- return jhash_2words(ipaddr, iph->protocol, jhash_initval);
+ return jhash_2words((__force u32)ipaddr, iph->protocol, jhash_initval);
}
static unsigned int
@@ -63,14 +63,14 @@
static u32 hash_v6(const struct sk_buff *skb)
{
const struct ipv6hdr *ip6h = ipv6_hdr(skb);
- u32 addr[4];
+ __be32 addr[4];
addr[0] = ip6h->saddr.s6_addr32[0] ^ ip6h->daddr.s6_addr32[0];
addr[1] = ip6h->saddr.s6_addr32[1] ^ ip6h->daddr.s6_addr32[1];
addr[2] = ip6h->saddr.s6_addr32[2] ^ ip6h->daddr.s6_addr32[2];
addr[3] = ip6h->saddr.s6_addr32[3] ^ ip6h->daddr.s6_addr32[3];
- return jhash2(addr, ARRAY_SIZE(addr), jhash_initval);
+ return jhash2((__force u32 *)addr, ARRAY_SIZE(addr), jhash_initval);
}
static unsigned int
diff --git a/net/netfilter/xt_cluster.c b/net/netfilter/xt_cluster.c
index 69a639f..225ee3e 100644
--- a/net/netfilter/xt_cluster.c
+++ b/net/netfilter/xt_cluster.c
@@ -15,14 +15,14 @@
#include <net/netfilter/nf_conntrack.h>
#include <linux/netfilter/xt_cluster.h>
-static inline u_int32_t nf_ct_orig_ipv4_src(const struct nf_conn *ct)
+static inline u32 nf_ct_orig_ipv4_src(const struct nf_conn *ct)
{
- return ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.u3.ip;
+ return (__force u32)ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.u3.ip;
}
-static inline const void *nf_ct_orig_ipv6_src(const struct nf_conn *ct)
+static inline const u32 *nf_ct_orig_ipv6_src(const struct nf_conn *ct)
{
- return ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.u3.ip6;
+ return (__force u32 *)ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.u3.ip6;
}
static inline u_int32_t
diff --git a/net/netfilter/xt_quota.c b/net/netfilter/xt_quota.c
index 01dd07b..98fc190 100644
--- a/net/netfilter/xt_quota.c
+++ b/net/netfilter/xt_quota.c
@@ -54,6 +54,7 @@
if (q->master == NULL)
return -ENOMEM;
+ q->master->quota = q->quota;
return true;
}
diff --git a/net/netfilter/xt_rateest.c b/net/netfilter/xt_rateest.c
index 220a1d5..4fc6a91 100644
--- a/net/netfilter/xt_rateest.c
+++ b/net/netfilter/xt_rateest.c
@@ -66,7 +66,7 @@
if (info->flags & XT_RATEEST_MATCH_BPS)
ret &= bps1 == bps2;
if (info->flags & XT_RATEEST_MATCH_PPS)
- ret &= pps2 == pps2;
+ ret &= pps1 == pps2;
break;
}
diff --git a/net/sctp/ipv6.c b/net/sctp/ipv6.c
index a63de3f..6a4b1909 100644
--- a/net/sctp/ipv6.c
+++ b/net/sctp/ipv6.c
@@ -133,7 +133,7 @@
/* ICMP error handler. */
SCTP_STATIC void sctp_v6_err(struct sk_buff *skb, struct inet6_skb_parm *opt,
- int type, int code, int offset, __be32 info)
+ u8 type, u8 code, int offset, __be32 info)
{
struct inet6_dev *idev;
struct sock *sk;
diff --git a/scripts/dtc/.gitignore b/scripts/dtc/.gitignore
new file mode 100644
index 0000000..095acb4
--- /dev/null
+++ b/scripts/dtc/.gitignore
@@ -0,0 +1,5 @@
+dtc
+dtc-lexer.lex.c
+dtc-parser.tab.c
+dtc-parser.tab.h
+
diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c
index 84da3ba..ac2150e 100644
--- a/sound/core/pcm_native.c
+++ b/sound/core/pcm_native.c
@@ -320,7 +320,7 @@
snd_mask_max(¶ms->masks[SNDRV_PCM_HW_PARAM_CHANNELS])) {
changed = substream->ops->ioctl(substream,
SNDRV_PCM_IOCTL1_FIFO_SIZE, params);
- if (params < 0)
+ if (changed < 0)
return changed;
}
}
diff --git a/sound/core/seq/seq_midi_event.c b/sound/core/seq/seq_midi_event.c
index 8284f17..b5d6ea4 100644
--- a/sound/core/seq/seq_midi_event.c
+++ b/sound/core/seq/seq_midi_event.c
@@ -504,10 +504,10 @@
if (dev->nostat && count < 12)
return -ENOMEM;
cmd = MIDI_CMD_CONTROL|(ev->data.control.channel & 0x0f);
- bytes[0] = ev->data.control.param & 0x007f;
- bytes[1] = (ev->data.control.param & 0x3f80) >> 7;
- bytes[2] = ev->data.control.value & 0x007f;
- bytes[3] = (ev->data.control.value & 0x3f80) >> 7;
+ bytes[0] = (ev->data.control.param & 0x3f80) >> 7;
+ bytes[1] = ev->data.control.param & 0x007f;
+ bytes[2] = (ev->data.control.value & 0x3f80) >> 7;
+ bytes[3] = ev->data.control.value & 0x007f;
if (cmd != dev->lastcmd && !dev->nostat) {
if (count < 9)
return -ENOMEM;
diff --git a/sound/pci/ctxfi/ctatc.c b/sound/pci/ctxfi/ctatc.c
index b0adc80..a49c766 100644
--- a/sound/pci/ctxfi/ctatc.c
+++ b/sound/pci/ctxfi/ctatc.c
@@ -46,8 +46,6 @@
SND_PCI_QUIRK(PCI_VENDOR_ID_CREATIVE, 0x0031, "SB073x", CTSB073X),
SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_CREATIVE, 0xf000, 0x6000,
"UAA", CTUAA),
- SND_PCI_QUIRK_VENDOR(PCI_VENDOR_ID_CREATIVE,
- "Unknown", CT20K1_UNKNOWN),
{ } /* terminator */
};
@@ -67,13 +65,16 @@
};
static const char *ct_subsys_name[NUM_CTCARDS] = {
+ /* 20k1 models */
[CTSB055X] = "SB055x",
[CTSB073X] = "SB073x",
- [CTSB0760] = "SB076x",
[CTUAA] = "UAA",
[CT20K1_UNKNOWN] = "Unknown",
+ /* 20k2 models */
+ [CTSB0760] = "SB076x",
[CTHENDRIX] = "Hendrix",
[CTSB0880] = "SB0880",
+ [CT20K2_UNKNOWN] = "Unknown",
};
static struct {
@@ -260,13 +261,8 @@
int device = apcm->substream->pcm->device;
unsigned int pitch;
- if (NULL != apcm->src) {
- /* Prepared pcm playback */
- return 0;
- }
-
/* first release old resources */
- atc->pcm_release_resources(atc, apcm);
+ atc_pcm_release_resources(atc, apcm);
/* Get SRC resource */
desc.multi = apcm->substream->runtime->channels;
@@ -660,10 +656,7 @@
unsigned int pitch;
int mix_base = 0, imp_base = 0;
- if (NULL != apcm->src) {
- /* Prepared pcm capture */
- return 0;
- }
+ atc_pcm_release_resources(atc, apcm);
/* Get needed resources. */
err = atc_pcm_capture_get_resources(atc, apcm);
@@ -866,7 +859,7 @@
struct dao *dao = container_of(atc->daios[SPDIFOO], struct dao, daio);
unsigned int rate = apcm->substream->runtime->rate;
unsigned int status;
- int err;
+ int err = 0;
unsigned char iec958_con_fs;
switch (rate) {
@@ -907,8 +900,7 @@
int err;
int i;
- if (NULL != apcm->src)
- return 0;
+ atc_pcm_release_resources(atc, apcm);
/* Configure SPDIFOO and PLL to passthrough mode;
* determine pll_rate. */
@@ -1115,32 +1107,20 @@
return err;
}
-static int ct_atc_destroy(struct ct_atc *atc)
+static int atc_release_resources(struct ct_atc *atc)
{
- struct daio_mgr *daio_mgr;
- struct dao *dao;
- struct dai *dai;
- struct daio *daio;
- struct sum_mgr *sum_mgr;
- struct src_mgr *src_mgr;
- struct srcimp_mgr *srcimp_mgr;
- struct srcimp *srcimp;
- struct ct_mixer *mixer;
- int i = 0;
+ int i;
+ struct daio_mgr *daio_mgr = NULL;
+ struct dao *dao = NULL;
+ struct dai *dai = NULL;
+ struct daio *daio = NULL;
+ struct sum_mgr *sum_mgr = NULL;
+ struct src_mgr *src_mgr = NULL;
+ struct srcimp_mgr *srcimp_mgr = NULL;
+ struct srcimp *srcimp = NULL;
+ struct ct_mixer *mixer = NULL;
- if (NULL == atc)
- return 0;
-
- if (atc->timer) {
- ct_timer_free(atc->timer);
- atc->timer = NULL;
- }
-
- /* Stop hardware and disable all interrupts */
- if (NULL != atc->hw)
- ((struct hw *)atc->hw)->card_stop(atc->hw);
-
- /* Destroy internal mixer objects */
+ /* disconnect internal mixer objects */
if (NULL != atc->mixer) {
mixer = atc->mixer;
mixer->set_input_left(mixer, MIX_LINE_IN, NULL);
@@ -1149,7 +1129,6 @@
mixer->set_input_right(mixer, MIX_MIC_IN, NULL);
mixer->set_input_left(mixer, MIX_SPDIF_IN, NULL);
mixer->set_input_right(mixer, MIX_SPDIF_IN, NULL);
- ct_mixer_destroy(atc->mixer);
}
if (NULL != atc->daios) {
@@ -1167,6 +1146,7 @@
daio_mgr->put_daio(daio_mgr, daio);
}
kfree(atc->daios);
+ atc->daios = NULL;
}
if (NULL != atc->pcm) {
@@ -1175,6 +1155,7 @@
sum_mgr->put_sum(sum_mgr, atc->pcm[i]);
kfree(atc->pcm);
+ atc->pcm = NULL;
}
if (NULL != atc->srcs) {
@@ -1183,6 +1164,7 @@
src_mgr->put_src(src_mgr, atc->srcs[i]);
kfree(atc->srcs);
+ atc->srcs = NULL;
}
if (NULL != atc->srcimps) {
@@ -1193,8 +1175,30 @@
srcimp_mgr->put_srcimp(srcimp_mgr, atc->srcimps[i]);
}
kfree(atc->srcimps);
+ atc->srcimps = NULL;
}
+ return 0;
+}
+
+static int ct_atc_destroy(struct ct_atc *atc)
+{
+ int i = 0;
+
+ if (NULL == atc)
+ return 0;
+
+ if (atc->timer) {
+ ct_timer_free(atc->timer);
+ atc->timer = NULL;
+ }
+
+ atc_release_resources(atc);
+
+ /* Destroy internal mixer objects */
+ if (NULL != atc->mixer)
+ ct_mixer_destroy(atc->mixer);
+
for (i = 0; i < NUM_RSCTYP; i++) {
if ((NULL != rsc_mgr_funcs[i].destroy) &&
(NULL != atc->rsc_mgrs[i]))
@@ -1240,9 +1244,21 @@
return -ENOENT;
}
p = snd_pci_quirk_lookup(atc->pci, list);
- if (!p)
- return -ENOENT;
- atc->model = p->value;
+ if (p) {
+ if (p->value < 0) {
+ printk(KERN_ERR "ctxfi: "
+ "Device %04x:%04x is black-listed\n",
+ atc->pci->subsystem_vendor,
+ atc->pci->subsystem_device);
+ return -ENOENT;
+ }
+ atc->model = p->value;
+ } else {
+ if (atc->chip_type == ATC20K1)
+ atc->model = CT20K1_UNKNOWN;
+ else
+ atc->model = CT20K2_UNKNOWN;
+ }
atc->model_name = ct_subsys_name[atc->model];
snd_printd("ctxfi: chip %s model %s (%04x:%04x) is found\n",
atc->chip_name, atc->model_name,
@@ -1310,7 +1326,7 @@
return 0;
}
-static int __devinit atc_get_resources(struct ct_atc *atc)
+static int atc_get_resources(struct ct_atc *atc)
{
struct daio_desc da_desc = {0};
struct daio_mgr *daio_mgr;
@@ -1407,16 +1423,10 @@
atc->n_pcm++;
}
- err = ct_mixer_create(atc, (struct ct_mixer **)&atc->mixer);
- if (err) {
- printk(KERN_ERR "ctxfi: Failed to create mixer obj!!!\n");
- return err;
- }
-
return 0;
}
-static void __devinit
+static void
atc_connect_dai(struct src_mgr *src_mgr, struct dai *dai,
struct src **srcs, struct srcimp **srcimps)
{
@@ -1455,7 +1465,7 @@
src_mgr->commit_write(src_mgr); /* Synchronously enable SRCs */
}
-static void __devinit atc_connect_resources(struct ct_atc *atc)
+static void atc_connect_resources(struct ct_atc *atc)
{
struct dai *dai;
struct dao *dao;
@@ -1501,6 +1511,84 @@
}
}
+#ifdef CONFIG_PM
+static int atc_suspend(struct ct_atc *atc, pm_message_t state)
+{
+ int i;
+ struct hw *hw = atc->hw;
+
+ snd_power_change_state(atc->card, SNDRV_CTL_POWER_D3hot);
+
+ for (i = FRONT; i < NUM_PCMS; i++) {
+ if (!atc->pcms[i])
+ continue;
+
+ snd_pcm_suspend_all(atc->pcms[i]);
+ }
+
+ atc_release_resources(atc);
+
+ hw->suspend(hw, state);
+
+ return 0;
+}
+
+static int atc_hw_resume(struct ct_atc *atc)
+{
+ struct hw *hw = atc->hw;
+ struct card_conf info = {0};
+
+ /* Re-initialize card hardware. */
+ info.rsr = atc->rsr;
+ info.msr = atc->msr;
+ info.vm_pgt_phys = atc_get_ptp_phys(atc, 0);
+ return hw->resume(hw, &info);
+}
+
+static int atc_resources_resume(struct ct_atc *atc)
+{
+ struct ct_mixer *mixer;
+ int err = 0;
+
+ /* Get resources */
+ err = atc_get_resources(atc);
+ if (err < 0) {
+ atc_release_resources(atc);
+ return err;
+ }
+
+ /* Build topology */
+ atc_connect_resources(atc);
+
+ mixer = atc->mixer;
+ mixer->resume(mixer);
+
+ return 0;
+}
+
+static int atc_resume(struct ct_atc *atc)
+{
+ int err = 0;
+
+ /* Do hardware resume. */
+ err = atc_hw_resume(atc);
+ if (err < 0) {
+ printk(KERN_ERR "ctxfi: pci_enable_device failed, "
+ "disabling device\n");
+ snd_card_disconnect(atc->card);
+ return err;
+ }
+
+ err = atc_resources_resume(atc);
+ if (err < 0)
+ return err;
+
+ snd_power_change_state(atc->card, SNDRV_CTL_POWER_D0);
+
+ return 0;
+}
+#endif
+
static struct ct_atc atc_preset __devinitdata = {
.map_audio_buffer = ct_map_audio_buffer,
.unmap_audio_buffer = ct_unmap_audio_buffer,
@@ -1529,6 +1617,10 @@
.spdif_out_set_status = atc_spdif_out_set_status,
.spdif_out_passthru = atc_spdif_out_passthru,
.have_digit_io_switch = atc_have_digit_io_switch,
+#ifdef CONFIG_PM
+ .suspend = atc_suspend,
+ .resume = atc_resume,
+#endif
};
/**
@@ -1587,6 +1679,12 @@
if (err < 0)
goto error1;
+ err = ct_mixer_create(atc, (struct ct_mixer **)&atc->mixer);
+ if (err) {
+ printk(KERN_ERR "ctxfi: Failed to create mixer obj!!!\n");
+ goto error1;
+ }
+
/* Get resources */
err = atc_get_resources(atc);
if (err < 0)
diff --git a/sound/pci/ctxfi/ctatc.h b/sound/pci/ctxfi/ctatc.h
index 9fe620ea..9fd8a57 100644
--- a/sound/pci/ctxfi/ctatc.h
+++ b/sound/pci/ctxfi/ctatc.h
@@ -136,6 +136,13 @@
unsigned char n_pcm;
struct ct_timer *timer;
+
+#ifdef CONFIG_PM
+ int (*suspend)(struct ct_atc *atc, pm_message_t state);
+ int (*resume)(struct ct_atc *atc);
+#define NUM_PCMS (NUM_CTALSADEVS - 1)
+ struct snd_pcm *pcms[NUM_PCMS];
+#endif
};
diff --git a/sound/pci/ctxfi/cthardware.h b/sound/pci/ctxfi/cthardware.h
index 4a8e04f..af55405 100644
--- a/sound/pci/ctxfi/cthardware.h
+++ b/sound/pci/ctxfi/cthardware.h
@@ -30,13 +30,16 @@
enum CTCARDS {
/* 20k1 models */
CTSB055X,
+ CT20K1_MODEL_FIRST = CTSB055X,
CTSB073X,
CTUAA,
CT20K1_UNKNOWN,
/* 20k2 models */
CTSB0760,
+ CT20K2_MODEL_FIRST = CTSB0760,
CTHENDRIX,
CTSB0880,
+ CT20K2_UNKNOWN,
NUM_CTCARDS /* This should always be the last */
};
@@ -61,6 +64,10 @@
int (*card_init)(struct hw *hw, struct card_conf *info);
int (*card_stop)(struct hw *hw);
int (*pll_init)(struct hw *hw, unsigned int rsr);
+#ifdef CONFIG_PM
+ int (*suspend)(struct hw *hw, pm_message_t state);
+ int (*resume)(struct hw *hw, struct card_conf *info);
+#endif
int (*is_adc_source_selected)(struct hw *hw, enum ADCSRC source);
int (*select_adc_source)(struct hw *hw, enum ADCSRC source);
int (*have_digit_io_switch)(struct hw *hw);
diff --git a/sound/pci/ctxfi/cthw20k1.c b/sound/pci/ctxfi/cthw20k1.c
index cb69d9d..ad3e1d1 100644
--- a/sound/pci/ctxfi/cthw20k1.c
+++ b/sound/pci/ctxfi/cthw20k1.c
@@ -1911,9 +1911,17 @@
goto error1;
}
- err = pci_request_regions(pci, "XFi");
- if (err < 0)
- goto error1;
+ if (!hw->io_base) {
+ err = pci_request_regions(pci, "XFi");
+ if (err < 0)
+ goto error1;
+
+ if (hw->model == CTUAA)
+ hw->io_base = pci_resource_start(pci, 5);
+ else
+ hw->io_base = pci_resource_start(pci, 0);
+
+ }
/* Switch to X-Fi mode from UAA mode if neeeded */
if (hw->model == CTUAA) {
@@ -1921,18 +1929,17 @@
if (err)
goto error2;
- hw->io_base = pci_resource_start(pci, 5);
- } else {
- hw->io_base = pci_resource_start(pci, 0);
}
- err = request_irq(pci->irq, ct_20k1_interrupt, IRQF_SHARED,
- "ctxfi", hw);
- if (err < 0) {
- printk(KERN_ERR "XFi: Cannot get irq %d\n", pci->irq);
- goto error2;
+ if (hw->irq < 0) {
+ err = request_irq(pci->irq, ct_20k1_interrupt, IRQF_SHARED,
+ "ctxfi", hw);
+ if (err < 0) {
+ printk(KERN_ERR "XFi: Cannot get irq %d\n", pci->irq);
+ goto error2;
+ }
+ hw->irq = pci->irq;
}
- hw->irq = pci->irq;
pci_set_master(pci);
@@ -1948,6 +1955,15 @@
static int hw_card_stop(struct hw *hw)
{
+ unsigned int data;
+
+ /* disable transport bus master and queueing of request */
+ hw_write_20kx(hw, TRNCTL, 0x00);
+
+ /* disable pll */
+ data = hw_read_20kx(hw, PLLCTL);
+ hw_write_20kx(hw, PLLCTL, (data & (~(0x0F<<12))));
+
/* TODO: Disable interrupt and so on... */
if (hw->irq >= 0)
synchronize_irq(hw->irq);
@@ -1987,11 +2003,9 @@
struct trn_conf trn_info = {0};
/* Get PCI io port base address and do Hendrix switch if needed. */
- if (!hw->io_base) {
- err = hw_card_start(hw);
- if (err)
- return err;
- }
+ err = hw_card_start(hw);
+ if (err)
+ return err;
/* PLL init */
err = hw_pll_init(hw, info->rsr);
@@ -2064,6 +2078,37 @@
return 0;
}
+#ifdef CONFIG_PM
+static int hw_suspend(struct hw *hw, pm_message_t state)
+{
+ struct pci_dev *pci = hw->pci;
+
+ hw_card_stop(hw);
+
+ if (hw->model == CTUAA) {
+ /* Switch to UAA config space. */
+ pci_write_config_dword(pci, UAA_CFG_SPACE_FLAG, 0x0);
+ }
+
+ pci_disable_device(pci);
+ pci_save_state(pci);
+ pci_set_power_state(pci, pci_choose_state(pci, state));
+
+ return 0;
+}
+
+static int hw_resume(struct hw *hw, struct card_conf *info)
+{
+ struct pci_dev *pci = hw->pci;
+
+ pci_set_power_state(pci, PCI_D0);
+ pci_restore_state(pci);
+
+ /* Re-initialize card hardware. */
+ return hw_card_init(hw, info);
+}
+#endif
+
static u32 hw_read_20kx(struct hw *hw, u32 reg)
{
u32 value;
@@ -2128,6 +2173,10 @@
.is_adc_source_selected = hw_is_adc_input_selected,
.select_adc_source = hw_adc_input_select,
.have_digit_io_switch = hw_have_digit_io_switch,
+#ifdef CONFIG_PM
+ .suspend = hw_suspend,
+ .resume = hw_resume,
+#endif
.src_rsc_get_ctrl_blk = src_get_rsc_ctrl_blk,
.src_rsc_put_ctrl_blk = src_put_rsc_ctrl_blk,
diff --git a/sound/pci/ctxfi/cthw20k2.c b/sound/pci/ctxfi/cthw20k2.c
index 4493a51..dec46d0 100644
--- a/sound/pci/ctxfi/cthw20k2.c
+++ b/sound/pci/ctxfi/cthw20k2.c
@@ -1860,16 +1860,18 @@
goto error1;
}
- err = pci_request_regions(pci, "XFi");
- if (err < 0)
- goto error1;
+ if (!hw->io_base) {
+ err = pci_request_regions(pci, "XFi");
+ if (err < 0)
+ goto error1;
- hw->io_base = pci_resource_start(hw->pci, 2);
- hw->mem_base = (unsigned long)ioremap(hw->io_base,
+ hw->io_base = pci_resource_start(hw->pci, 2);
+ hw->mem_base = (unsigned long)ioremap(hw->io_base,
pci_resource_len(hw->pci, 2));
- if (NULL == (void *)hw->mem_base) {
- err = -ENOENT;
- goto error2;
+ if (NULL == (void *)hw->mem_base) {
+ err = -ENOENT;
+ goto error2;
+ }
}
/* Switch to 20k2 mode from UAA mode. */
@@ -1901,6 +1903,15 @@
static int hw_card_stop(struct hw *hw)
{
+ unsigned int data;
+
+ /* disable transport bus master and queueing of request */
+ hw_write_20kx(hw, TRANSPORT_CTL, 0x00);
+
+ /* disable pll */
+ data = hw_read_20kx(hw, PLL_ENB);
+ hw_write_20kx(hw, PLL_ENB, (data & (~0x07)));
+
/* TODO: Disable interrupt and so on... */
return 0;
}
@@ -1939,11 +1950,9 @@
/* Get PCI io port/memory base address and
* do 20kx core switch if needed. */
- if (!hw->io_base) {
- err = hw_card_start(hw);
- if (err)
- return err;
- }
+ err = hw_card_start(hw);
+ if (err)
+ return err;
/* PLL init */
err = hw_pll_init(hw, info->rsr);
@@ -2006,6 +2015,32 @@
return 0;
}
+#ifdef CONFIG_PM
+static int hw_suspend(struct hw *hw, pm_message_t state)
+{
+ struct pci_dev *pci = hw->pci;
+
+ hw_card_stop(hw);
+
+ pci_disable_device(pci);
+ pci_save_state(pci);
+ pci_set_power_state(pci, pci_choose_state(pci, state));
+
+ return 0;
+}
+
+static int hw_resume(struct hw *hw, struct card_conf *info)
+{
+ struct pci_dev *pci = hw->pci;
+
+ pci_set_power_state(pci, PCI_D0);
+ pci_restore_state(pci);
+
+ /* Re-initialize card hardware. */
+ return hw_card_init(hw, info);
+}
+#endif
+
static u32 hw_read_20kx(struct hw *hw, u32 reg)
{
return readl((void *)(hw->mem_base + reg));
@@ -2025,6 +2060,10 @@
.is_adc_source_selected = hw_is_adc_input_selected,
.select_adc_source = hw_adc_input_select,
.have_digit_io_switch = hw_have_digit_io_switch,
+#ifdef CONFIG_PM
+ .suspend = hw_suspend,
+ .resume = hw_resume,
+#endif
.src_rsc_get_ctrl_blk = src_get_rsc_ctrl_blk,
.src_rsc_put_ctrl_blk = src_put_rsc_ctrl_blk,
diff --git a/sound/pci/ctxfi/ctmixer.c b/sound/pci/ctxfi/ctmixer.c
index 666722d..f26d7cd 100644
--- a/sound/pci/ctxfi/ctmixer.c
+++ b/sound/pci/ctxfi/ctmixer.c
@@ -462,6 +462,43 @@
return;
}
+static void do_switch(struct ct_atc *atc, enum CTALSA_MIXER_CTL type, int state)
+{
+ struct ct_mixer *mixer = atc->mixer;
+
+ /* Do changes in mixer. */
+ if ((SWH_CAPTURE_START <= type) && (SWH_CAPTURE_END >= type)) {
+ if (state) {
+ ct_mixer_recording_select(mixer,
+ get_amixer_index(type));
+ } else {
+ ct_mixer_recording_unselect(mixer,
+ get_amixer_index(type));
+ }
+ }
+ /* Do changes out of mixer. */
+ if (state && (MIXER_LINEIN_C_S == type || MIXER_MIC_C_S == type))
+ do_line_mic_switch(atc, type);
+ else if (MIXER_WAVEF_P_S == type)
+ atc->line_front_unmute(atc, state);
+ else if (MIXER_WAVES_P_S == type)
+ atc->line_surround_unmute(atc, state);
+ else if (MIXER_WAVEC_P_S == type)
+ atc->line_clfe_unmute(atc, state);
+ else if (MIXER_WAVER_P_S == type)
+ atc->line_rear_unmute(atc, state);
+ else if (MIXER_LINEIN_P_S == type)
+ atc->line_in_unmute(atc, state);
+ else if (MIXER_SPDIFO_P_S == type)
+ atc->spdif_out_unmute(atc, state);
+ else if (MIXER_SPDIFI_P_S == type)
+ atc->spdif_in_unmute(atc, state);
+ else if (MIXER_DIGITAL_IO_S == type)
+ do_digit_io_switch(atc, state);
+
+ return;
+}
+
static int ct_alsa_mix_switch_info(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_info *uinfo)
{
@@ -498,35 +535,7 @@
return 0;
set_switch_state(mixer, type, state);
- /* Do changes in mixer. */
- if ((SWH_CAPTURE_START <= type) && (SWH_CAPTURE_END >= type)) {
- if (state) {
- ct_mixer_recording_select(mixer,
- get_amixer_index(type));
- } else {
- ct_mixer_recording_unselect(mixer,
- get_amixer_index(type));
- }
- }
- /* Do changes out of mixer. */
- if (state && (MIXER_LINEIN_C_S == type || MIXER_MIC_C_S == type))
- do_line_mic_switch(atc, type);
- else if (MIXER_WAVEF_P_S == type)
- atc->line_front_unmute(atc, state);
- else if (MIXER_WAVES_P_S == type)
- atc->line_surround_unmute(atc, state);
- else if (MIXER_WAVEC_P_S == type)
- atc->line_clfe_unmute(atc, state);
- else if (MIXER_WAVER_P_S == type)
- atc->line_rear_unmute(atc, state);
- else if (MIXER_LINEIN_P_S == type)
- atc->line_in_unmute(atc, state);
- else if (MIXER_SPDIFO_P_S == type)
- atc->spdif_out_unmute(atc, state);
- else if (MIXER_SPDIFI_P_S == type)
- atc->spdif_in_unmute(atc, state);
- else if (MIXER_DIGITAL_IO_S == type)
- do_digit_io_switch(atc, state);
+ do_switch(atc, type, state);
return 1;
}
@@ -1039,6 +1048,28 @@
return 0;
}
+#ifdef CONFIG_PM
+static int mixer_resume(struct ct_mixer *mixer)
+{
+ int i, state;
+ struct amixer *amixer;
+
+ /* resume topology and volume gain. */
+ for (i = 0; i < NUM_CT_AMIXERS*CHN_NUM; i++) {
+ amixer = mixer->amixers[i];
+ amixer->ops->commit_write(amixer);
+ }
+
+ /* resume switch state. */
+ for (i = SWH_MIXER_START; i <= SWH_MIXER_END; i++) {
+ state = get_switch_state(mixer, i);
+ do_switch(mixer->atc, i, state);
+ }
+
+ return 0;
+}
+#endif
+
int ct_mixer_destroy(struct ct_mixer *mixer)
{
struct sum_mgr *sum_mgr = (struct sum_mgr *)mixer->atc->rsc_mgrs[SUM];
@@ -1087,6 +1118,9 @@
mixer->get_output_ports = mixer_get_output_ports;
mixer->set_input_left = mixer_set_input_left;
mixer->set_input_right = mixer_set_input_right;
+#ifdef CONFIG_PM
+ mixer->resume = mixer_resume;
+#endif
/* Allocate chip resources for mixer obj */
err = ct_mixer_get_resources(mixer);
diff --git a/sound/pci/ctxfi/ctmixer.h b/sound/pci/ctxfi/ctmixer.h
index e2d96eb..b009e98 100644
--- a/sound/pci/ctxfi/ctmixer.h
+++ b/sound/pci/ctxfi/ctmixer.h
@@ -56,6 +56,9 @@
enum MIXER_PORT_T type, struct rsc *rsc);
int (*set_input_right)(struct ct_mixer *mixer,
enum MIXER_PORT_T type, struct rsc *rsc);
+#ifdef CONFIG_PM
+ int (*resume)(struct ct_mixer *mixer);
+#endif
};
int ct_alsa_mix_create(struct ct_atc *atc,
diff --git a/sound/pci/ctxfi/ctpcm.c b/sound/pci/ctxfi/ctpcm.c
index 9e5c0c4..60ea231 100644
--- a/sound/pci/ctxfi/ctpcm.c
+++ b/sound/pci/ctxfi/ctpcm.c
@@ -422,5 +422,9 @@
snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV_SG,
snd_dma_pci_data(atc->pci), 128*1024, 128*1024);
+#ifdef CONFIG_PM
+ atc->pcms[device] = pcm;
+#endif
+
return 0;
}
diff --git a/sound/pci/ctxfi/xfi.c b/sound/pci/ctxfi/xfi.c
index 2d3dd89..7654174 100644
--- a/sound/pci/ctxfi/xfi.c
+++ b/sound/pci/ctxfi/xfi.c
@@ -121,11 +121,33 @@
pci_set_drvdata(pci, NULL);
}
+#ifdef CONFIG_PM
+static int ct_card_suspend(struct pci_dev *pci, pm_message_t state)
+{
+ struct snd_card *card = pci_get_drvdata(pci);
+ struct ct_atc *atc = card->private_data;
+
+ return atc->suspend(atc, state);
+}
+
+static int ct_card_resume(struct pci_dev *pci)
+{
+ struct snd_card *card = pci_get_drvdata(pci);
+ struct ct_atc *atc = card->private_data;
+
+ return atc->resume(atc);
+}
+#endif
+
static struct pci_driver ct_driver = {
.name = "SB-XFi",
.id_table = ct_pci_dev_ids,
.probe = ct_card_probe,
.remove = __devexit_p(ct_card_remove),
+#ifdef CONFIG_PM
+ .suspend = ct_card_suspend,
+ .resume = ct_card_resume,
+#endif
};
static int __init ct_card_init(void)
diff --git a/sound/pci/hda/Kconfig b/sound/pci/hda/Kconfig
index c710150..04438f1 100644
--- a/sound/pci/hda/Kconfig
+++ b/sound/pci/hda/Kconfig
@@ -2,7 +2,6 @@
tristate "Intel HD Audio"
select SND_PCM
select SND_VMASTER
- select SND_JACK if INPUT=y || INPUT=SND
help
Say Y here to include support for Intel "High Definition
Audio" (Azalia) and its compatible devices.
@@ -39,6 +38,14 @@
Say Y here to build a digital beep interface for HD-audio
driver. This interface is used to generate digital beeps.
+config SND_HDA_INPUT_JACK
+ bool "Support jack plugging notification via input layer"
+ depends on INPUT=y || INPUT=SND_HDA_INTEL
+ select SND_JACK
+ help
+ Say Y here to enable the jack plugging notification via
+ input layer.
+
config SND_HDA_CODEC_REALTEK
bool "Build Realtek HD-audio codec support"
default y
diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c
index 4fcbe21..ac868c5 100644
--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -349,7 +349,7 @@
&spec->cur_mux[adc_idx]);
}
-#ifdef CONFIG_SND_JACK
+#ifdef CONFIG_SND_HDA_INPUT_JACK
static void conexant_free_jack_priv(struct snd_jack *jack)
{
struct conexant_jack *jacks = jack->private_data;
@@ -463,7 +463,7 @@
static void conexant_free(struct hda_codec *codec)
{
-#ifdef CONFIG_SND_JACK
+#ifdef CONFIG_SND_HDA_INPUT_JACK
struct conexant_spec *spec = codec->spec;
if (spec->jacks.list) {
struct conexant_jack *jacks = spec->jacks.list;
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index bf4b78a..3345331 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -250,13 +250,6 @@
ALC883_MODEL_LAST,
};
-/* styles of capture selection */
-enum {
- CAPT_MUX = 0, /* only mux based */
- CAPT_MIX, /* only mixer based */
- CAPT_1MUX_MIX, /* first mux and other mixers */
-};
-
/* for GPIO Poll */
#define GPIO_MASK 0x03
@@ -306,7 +299,6 @@
hda_nid_t *adc_nids;
hda_nid_t *capsrc_nids;
hda_nid_t dig_in_nid; /* digital-in NID; optional */
- int capture_style; /* capture style (CAPT_*) */
/* capture source */
unsigned int num_mux_defs;
@@ -420,12 +412,13 @@
unsigned int mux_idx;
hda_nid_t nid = spec->capsrc_nids ?
spec->capsrc_nids[adc_idx] : spec->adc_nids[adc_idx];
+ unsigned int type;
mux_idx = adc_idx >= spec->num_mux_defs ? 0 : adc_idx;
imux = &spec->input_mux[mux_idx];
- if (spec->capture_style &&
- !(spec->capture_style == CAPT_1MUX_MIX && !adc_idx)) {
+ type = (get_wcaps(codec, nid) & AC_WCAP_TYPE) >> AC_WCAP_TYPE_SHIFT;
+ if (type == AC_WID_AUD_MIX) {
/* Matrix-mixer style (e.g. ALC882) */
unsigned int *cur_val = &spec->cur_mux[adc_idx];
unsigned int i, idx;
@@ -7557,7 +7550,6 @@
spec->stream_digital_playback = &alc882_pcm_digital_playback;
spec->stream_digital_capture = &alc882_pcm_digital_capture;
- spec->capture_style = CAPT_MIX; /* matrix-style capture */
if (!spec->adc_nids && spec->input_mux) {
/* check whether NID 0x07 is valid */
unsigned int wcap = get_wcaps(codec, 0x07);
@@ -9781,7 +9773,6 @@
}
if (!spec->capsrc_nids)
spec->capsrc_nids = alc883_capsrc_nids;
- spec->capture_style = CAPT_MIX; /* matrix-style capture */
spec->init_amp = ALC_INIT_DEFAULT; /* always initialize */
break;
case 0x10ec0889:
@@ -9791,8 +9782,6 @@
}
if (!spec->capsrc_nids)
spec->capsrc_nids = alc889_capsrc_nids;
- spec->capture_style = CAPT_1MUX_MIX; /* 1mux/Nmix-style
- capture */
break;
default:
if (!spec->num_adc_nids) {
@@ -9801,7 +9790,6 @@
}
if (!spec->capsrc_nids)
spec->capsrc_nids = alc883_capsrc_nids;
- spec->capture_style = CAPT_MIX; /* matrix-style capture */
break;
}
@@ -10913,9 +10901,27 @@
return 0;
}
-/* identical with ALC880 */
-#define alc262_auto_create_analog_input_ctls \
- alc880_auto_create_analog_input_ctls
+static int alc262_auto_create_analog_input_ctls(struct alc_spec *spec,
+ const struct auto_pin_cfg *cfg)
+{
+ int err;
+
+ err = alc880_auto_create_analog_input_ctls(spec, cfg);
+ if (err < 0)
+ return err;
+ /* digital-mic input pin is excluded in alc880_auto_create..()
+ * because it's under 0x18
+ */
+ if (cfg->input_pins[AUTO_PIN_MIC] == 0x12 ||
+ cfg->input_pins[AUTO_PIN_FRONT_MIC] == 0x12) {
+ struct hda_input_mux *imux = &spec->private_imux[0];
+ imux->items[imux->num_items].label = "Int Mic";
+ imux->items[imux->num_items].index = 0x09;
+ imux->num_items++;
+ }
+ return 0;
+}
+
/*
* generic initialization of ADC, input mixers and output mixers
@@ -11332,6 +11338,7 @@
SND_PCI_QUIRK(0x104d, 0x8203, "Sony UX-90", ALC262_HIPPO),
SND_PCI_QUIRK(0x104d, 0x820f, "Sony ASSAMD", ALC262_SONY_ASSAMD),
SND_PCI_QUIRK(0x104d, 0x9016, "Sony VAIO", ALC262_AUTO), /* dig-only */
+ SND_PCI_QUIRK(0x104d, 0x9025, "Sony VAIO Z21MN", ALC262_TOSHIBA_S06),
SND_PCI_QUIRK_MASK(0x104d, 0xff00, 0x9000, "Sony VAIO",
ALC262_SONY_ASSAMD),
SND_PCI_QUIRK(0x1179, 0x0001, "Toshiba dynabook SS RX1",
@@ -11539,6 +11546,7 @@
.capsrc_nids = alc262_dmic_capsrc_nids,
.dac_nids = alc262_dac_nids,
.adc_nids = alc262_dmic_adc_nids, /* ADC0 */
+ .num_adc_nids = 1, /* single ADC */
.dig_out_nid = ALC262_DIGOUT_NID,
.num_channel_mode = ARRAY_SIZE(alc262_modes),
.channel_mode = alc262_modes,
@@ -11640,21 +11648,36 @@
spec->stream_digital_playback = &alc262_pcm_digital_playback;
spec->stream_digital_capture = &alc262_pcm_digital_capture;
- spec->capture_style = CAPT_MIX;
if (!spec->adc_nids && spec->input_mux) {
- /* check whether NID 0x07 is valid */
- unsigned int wcap = get_wcaps(codec, 0x07);
-
- /* get type */
- wcap = (wcap & AC_WCAP_TYPE) >> AC_WCAP_TYPE_SHIFT;
- if (wcap != AC_WID_AUD_IN) {
- spec->adc_nids = alc262_adc_nids_alt;
- spec->num_adc_nids = ARRAY_SIZE(alc262_adc_nids_alt);
- spec->capsrc_nids = alc262_capsrc_nids_alt;
+ int i;
+ /* check whether the digital-mic has to be supported */
+ for (i = 0; i < spec->input_mux->num_items; i++) {
+ if (spec->input_mux->items[i].index >= 9)
+ break;
+ }
+ if (i < spec->input_mux->num_items) {
+ /* use only ADC0 */
+ spec->adc_nids = alc262_dmic_adc_nids;
+ spec->num_adc_nids = 1;
+ spec->capsrc_nids = alc262_dmic_capsrc_nids;
} else {
- spec->adc_nids = alc262_adc_nids;
- spec->num_adc_nids = ARRAY_SIZE(alc262_adc_nids);
- spec->capsrc_nids = alc262_capsrc_nids;
+ /* all analog inputs */
+ /* check whether NID 0x07 is valid */
+ unsigned int wcap = get_wcaps(codec, 0x07);
+
+ /* get type */
+ wcap = (wcap & AC_WCAP_TYPE) >> AC_WCAP_TYPE_SHIFT;
+ if (wcap != AC_WID_AUD_IN) {
+ spec->adc_nids = alc262_adc_nids_alt;
+ spec->num_adc_nids =
+ ARRAY_SIZE(alc262_adc_nids_alt);
+ spec->capsrc_nids = alc262_capsrc_nids_alt;
+ } else {
+ spec->adc_nids = alc262_adc_nids;
+ spec->num_adc_nids =
+ ARRAY_SIZE(alc262_adc_nids);
+ spec->capsrc_nids = alc262_capsrc_nids;
+ }
}
}
if (!spec->cap_mixer && !spec->no_analog)
@@ -13244,26 +13267,8 @@
return 0;
}
-static int alc269_auto_create_analog_input_ctls(struct alc_spec *spec,
- const struct auto_pin_cfg *cfg)
-{
- int err;
-
- err = alc880_auto_create_analog_input_ctls(spec, cfg);
- if (err < 0)
- return err;
- /* digital-mic input pin is excluded in alc880_auto_create..()
- * because it's under 0x18
- */
- if (cfg->input_pins[AUTO_PIN_MIC] == 0x12 ||
- cfg->input_pins[AUTO_PIN_FRONT_MIC] == 0x12) {
- struct hda_input_mux *imux = &spec->private_imux[0];
- imux->items[imux->num_items].label = "Int Mic";
- imux->items[imux->num_items].index = 0x05;
- imux->num_items++;
- }
- return 0;
-}
+#define alc269_auto_create_analog_input_ctls \
+ alc262_auto_create_analog_input_ctls
#ifdef CONFIG_SND_HDA_POWER_SAVE
#define alc269_loopbacks alc880_loopbacks
@@ -15554,7 +15559,6 @@
spec->adc_nids = alc861vd_adc_nids;
spec->num_adc_nids = ARRAY_SIZE(alc861vd_adc_nids);
spec->capsrc_nids = alc861vd_capsrc_nids;
- spec->capture_style = CAPT_MIX;
set_capture_mixer(spec);
set_beep_amp(spec, 0x0b, 0x05, HDA_INPUT);
@@ -17474,7 +17478,6 @@
spec->adc_nids = alc662_adc_nids;
spec->num_adc_nids = ARRAY_SIZE(alc662_adc_nids);
spec->capsrc_nids = alc662_capsrc_nids;
- spec->capture_style = CAPT_MIX;
if (!spec->cap_mixer)
set_capture_mixer(spec);
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 93e47c9..14f3c3e 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -639,7 +639,7 @@
static unsigned int stac92xx_vref_set(struct hda_codec *codec,
hda_nid_t nid, unsigned int new_vref)
{
- unsigned int error;
+ int error;
unsigned int pincfg;
pincfg = snd_hda_codec_read(codec, nid, 0,
AC_VERB_GET_PIN_WIDGET_CONTROL, 0);
@@ -2703,7 +2703,7 @@
{
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
unsigned int new_vref = 0;
- unsigned int error;
+ int error;
hda_nid_t nid = kcontrol->private_value;
if (ucontrol->value.enumerated.item[0] == 0)
@@ -4035,7 +4035,7 @@
AC_VERB_SET_GPIO_DATA, gpiostate); /* sync */
}
-#ifdef CONFIG_SND_JACK
+#ifdef CONFIG_SND_HDA_INPUT_JACK
static void stac92xx_free_jack_priv(struct snd_jack *jack)
{
struct sigmatel_jack *jacks = jack->private_data;
@@ -4047,7 +4047,7 @@
static int stac92xx_add_jack(struct hda_codec *codec,
hda_nid_t nid, int type)
{
-#ifdef CONFIG_SND_JACK
+#ifdef CONFIG_SND_HDA_INPUT_JACK
struct sigmatel_spec *spec = codec->spec;
struct sigmatel_jack *jack;
int def_conf = snd_hda_codec_get_pincfg(codec, nid);
@@ -4336,7 +4336,7 @@
static void stac92xx_free_jacks(struct hda_codec *codec)
{
-#ifdef CONFIG_SND_JACK
+#ifdef CONFIG_SND_HDA_INPUT_JACK
/* free jack instances manually when clearing/reconfiguring */
struct sigmatel_spec *spec = codec->spec;
if (!codec->bus->shutdown && spec->jacks.list) {
diff --git a/sound/pci/via82xx.c b/sound/pci/via82xx.c
index 1ef58c5..949fcaf 100644
--- a/sound/pci/via82xx.c
+++ b/sound/pci/via82xx.c
@@ -85,6 +85,7 @@
static int ac97_clock = 48000;
static char *ac97_quirk;
static int dxs_support;
+static int nodelay;
module_param(index, int, 0444);
MODULE_PARM_DESC(index, "Index value for VIA 82xx bridge.");
@@ -102,6 +103,8 @@
MODULE_PARM_DESC(ac97_quirk, "AC'97 workaround for strange hardware.");
module_param(dxs_support, int, 0444);
MODULE_PARM_DESC(dxs_support, "Support for DXS channels (0 = auto, 1 = enable, 2 = disable, 3 = 48k only, 4 = no VRA, 5 = enable any sample rate)");
+module_param(nodelay, int, 0444);
+MODULE_PARM_DESC(nodelay, "Disable 500ms init delay");
/* just for backward compatibility */
static int enable;
@@ -549,7 +552,8 @@
int err;
err = snd_via82xx_codec_ready(chip, ac97->num);
/* here we need to wait fairly for long time.. */
- msleep(500);
+ if (!nodelay)
+ msleep(500);
}
static void snd_via82xx_codec_write(struct snd_ac97 *ac97,
diff --git a/sound/soc/blackfin/bf5xx-i2s.c b/sound/soc/blackfin/bf5xx-i2s.c
index 9648244..af06904 100644
--- a/sound/soc/blackfin/bf5xx-i2s.c
+++ b/sound/soc/blackfin/bf5xx-i2s.c
@@ -50,6 +50,7 @@
u16 tcr2;
u16 rcr2;
int counter;
+ int configured;
};
static struct bf5xx_i2s_port bf5xx_i2s;
@@ -168,7 +169,7 @@
break;
}
- if (bf5xx_i2s.counter == 1) {
+ if (!bf5xx_i2s.configured) {
/*
* TX and RX are not independent,they are enabled at the
* same time, even if only one side is running. So, we
@@ -177,6 +178,7 @@
*
* CPU DAI:slave mode.
*/
+ bf5xx_i2s.configured = 1;
ret = sport_config_rx(sport_handle, bf5xx_i2s.rcr1,
bf5xx_i2s.rcr2, 0, 0);
if (ret) {
@@ -200,6 +202,9 @@
{
pr_debug("%s enter\n", __func__);
bf5xx_i2s.counter--;
+ /* No active stream, SPORT is allowed to be configured again. */
+ if (!bf5xx_i2s.counter)
+ bf5xx_i2s.configured = 0;
}
static int bf5xx_i2s_probe(struct platform_device *pdev,
@@ -244,8 +249,7 @@
return 0;
}
-static int bf5xx_i2s_resume(struct platform_device *pdev,
- struct snd_soc_dai *dai)
+static int bf5xx_i2s_resume(struct snd_soc_dai *dai)
{
int ret;
struct sport_device *sport =
