sfc: Implement message level control
Replace EFX_ERR() with netif_err(), EFX_INFO() with netif_info(),
EFX_LOG() with netif_dbg() and EFX_TRACE() and EFX_REGDUMP() with
netif_vdbg().
Replace EFX_ERR_RL(), EFX_INFO_RL() and EFX_LOG_RL() using explicit
calls to net_ratelimit().
Implement the ethtool operations to get and set message level flags,
and add a 'debug' module parameter for the initial value.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/sfc/falcon_boards.c b/drivers/net/sfc/falcon_boards.c
index c7a933a..92b35e3 100644
--- a/drivers/net/sfc/falcon_boards.c
+++ b/drivers/net/sfc/falcon_boards.c
@@ -106,12 +106,12 @@
alarms1 &= mask;
alarms2 &= mask >> 8;
if (alarms1 || alarms2) {
- EFX_ERR(efx,
- "LM87 detected a hardware failure (status %02x:%02x)"
- "%s%s\n",
- alarms1, alarms2,
- (alarms1 & LM87_ALARM_TEMP_INT) ? " INTERNAL" : "",
- (alarms1 & LM87_ALARM_TEMP_EXT1) ? " EXTERNAL" : "");
+ netif_err(efx, hw, efx->net_dev,
+ "LM87 detected a hardware failure (status %02x:%02x)"
+ "%s%s\n",
+ alarms1, alarms2,
+ (alarms1 & LM87_ALARM_TEMP_INT) ? " INTERNAL" : "",
+ (alarms1 & LM87_ALARM_TEMP_EXT1) ? " EXTERNAL" : "");
return -ERANGE;
}
@@ -243,7 +243,7 @@
(0 << P0_EN_3V3X_LBN) | (0 << P0_EN_5V_LBN) |
(0 << P0_EN_1V0X_LBN));
if (rc != out) {
- EFX_INFO(efx, "power-cycling PHY\n");
+ netif_info(efx, hw, efx->net_dev, "power-cycling PHY\n");
rc = i2c_smbus_write_byte_data(ioexp_client, P0_OUT, out);
if (rc)
goto fail_on;
@@ -269,7 +269,8 @@
if (rc)
goto fail_on;
- EFX_INFO(efx, "waiting for DSP boot (attempt %d)...\n", i);
+ netif_info(efx, hw, efx->net_dev,
+ "waiting for DSP boot (attempt %d)...\n", i);
/* In flash config mode, DSP does not turn on AFE, so
* just wait 1 second.
@@ -291,7 +292,7 @@
}
}
- EFX_INFO(efx, "timed out waiting for DSP boot\n");
+ netif_info(efx, hw, efx->net_dev, "timed out waiting for DSP boot\n");
rc = -ETIMEDOUT;
fail_on:
sfe4001_poweroff(efx);
@@ -377,7 +378,7 @@
{
struct falcon_board *board = falcon_board(efx);
- EFX_INFO(efx, "%s\n", __func__);
+ netif_info(efx, drv, efx->net_dev, "%s\n", __func__);
device_remove_file(&efx->pci_dev->dev, &dev_attr_phy_flash_cfg);
sfe4001_poweroff(efx);
@@ -461,7 +462,7 @@
if (rc)
goto fail_on;
- EFX_INFO(efx, "PHY is powered on\n");
+ netif_info(efx, hw, efx->net_dev, "PHY is powered on\n");
return 0;
fail_on:
@@ -493,7 +494,7 @@
static void sfn4111t_fini(struct efx_nic *efx)
{
- EFX_INFO(efx, "%s\n", __func__);
+ netif_info(efx, drv, efx->net_dev, "%s\n", __func__);
device_remove_file(&efx->pci_dev->dev, &dev_attr_phy_flash_cfg);
i2c_unregister_device(falcon_board(efx)->hwmon_client);
@@ -742,13 +743,14 @@
board->type = &board_types[i];
if (board->type) {
- EFX_INFO(efx, "board is %s rev %c%d\n",
+ netif_info(efx, probe, efx->net_dev, "board is %s rev %c%d\n",
(efx->pci_dev->subsystem_vendor == EFX_VENDID_SFC)
? board->type->ref_model : board->type->gen_type,
'A' + board->major, board->minor);
return 0;
} else {
- EFX_ERR(efx, "unknown board type %d\n", type_id);
+ netif_err(efx, probe, efx->net_dev, "unknown board type %d\n",
+ type_id);
return -ENODEV;
}
}
