crypto: zip - Add ThunderX ZIP driver core
Add a driver for the ZIP engine found on Cavium ThunderX SOCs.
The ZIP engine supports hardware accelerated compression and
decompression. It includes 2 independent ZIP cores and supports:
- DEFLATE compression and decompression (RFC 1951)
- LZS compression and decompression (RFC 2395 and ANSI X3.241-1994)
- ADLER32 and CRC32 checksums for ZLIB (RFC 1950) and GZIP (RFC 1952)
The ZIP engine is presented as a PCI device. It supports DMA and
scatter-gather.
Signed-off-by: Mahipal Challa <Mahipal.Challa@cavium.com>
Signed-off-by: Jan Glauber <jglauber@cavium.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
diff --git a/drivers/crypto/cavium/zip/common.h b/drivers/crypto/cavium/zip/common.h
new file mode 100644
index 0000000..dc451e0
--- /dev/null
+++ b/drivers/crypto/cavium/zip/common.h
@@ -0,0 +1,202 @@
+/***********************license start************************************
+ * Copyright (c) 2003-2017 Cavium, Inc.
+ * All rights reserved.
+ *
+ * License: one of 'Cavium License' or 'GNU General Public License Version 2'
+ *
+ * This file is provided under the terms of the Cavium License (see below)
+ * or under the terms of GNU General Public License, Version 2, as
+ * published by the Free Software Foundation. When using or redistributing
+ * this file, you may do so under either license.
+ *
+ * Cavium License: Redistribution and use in source and binary forms, with
+ * or without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ *
+ * * Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials provided
+ * with the distribution.
+ *
+ * * Neither the name of Cavium Inc. nor the names of its contributors may be
+ * used to endorse or promote products derived from this software without
+ * specific prior written permission.
+ *
+ * This Software, including technical data, may be subject to U.S. export
+ * control laws, including the U.S. Export Administration Act and its
+ * associated regulations, and may be subject to export or import
+ * regulations in other countries.
+ *
+ * TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED "AS IS"
+ * AND WITH ALL FAULTS AND CAVIUM INC. MAKES NO PROMISES, REPRESENTATIONS
+ * OR WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH
+ * RESPECT TO THE SOFTWARE, INCLUDING ITS CONDITION, ITS CONFORMITY TO ANY
+ * REPRESENTATION OR DESCRIPTION, OR THE EXISTENCE OF ANY LATENT OR PATENT
+ * DEFECTS, AND CAVIUM SPECIFICALLY DISCLAIMS ALL IMPLIED (IF ANY)
+ * WARRANTIES OF TITLE, MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR A
+ * PARTICULAR PURPOSE, LACK OF VIRUSES, ACCURACY OR COMPLETENESS, QUIET
+ * ENJOYMENT, QUIET POSSESSION OR CORRESPONDENCE TO DESCRIPTION. THE
+ * ENTIRE RISK ARISING OUT OF USE OR PERFORMANCE OF THE SOFTWARE LIES
+ * WITH YOU.
+ ***********************license end**************************************/
+
+#ifndef __COMMON_H__
+#define __COMMON_H__
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/seq_file.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/version.h>
+
+/* Device specific zlib function definitions */
+#include "zip_device.h"
+
+/* ZIP device definitions */
+#include "zip_main.h"
+
+/* ZIP memory allocation/deallocation related definitions */
+#include "zip_mem.h"
+
+/* Device specific structure definitions */
+#include "zip_regs.h"
+
+#define ZIP_ERROR -1
+
+#define ZIP_FLUSH_FINISH 4
+
+#define RAW_FORMAT 0 /* for rawpipe */
+#define ZLIB_FORMAT 1 /* for zpipe */
+#define GZIP_FORMAT 2 /* for gzpipe */
+#define LZS_FORMAT 3 /* for lzspipe */
+
+/* Max number of ZIP devices supported */
+#define MAX_ZIP_DEVICES 2
+
+/* Configures the number of zip queues to be used */
+#define ZIP_NUM_QUEUES 2
+
+#define DYNAMIC_STOP_EXCESS 1024
+
+/* Maximum buffer sizes in direct mode */
+#define MAX_INPUT_BUFFER_SIZE (64 * 1024)
+#define MAX_OUTPUT_BUFFER_SIZE (64 * 1024)
+
+/**
+ * struct zip_operation - common data structure for comp and decomp operations
+ * @input: Next input byte is read from here
+ * @output: Next output byte written here
+ * @ctx_addr: Inflate context buffer address
+ * @history: Pointer to the history buffer
+ * @input_len: Number of bytes available at next_in
+ * @input_total_len: Total number of input bytes read
+ * @output_len: Remaining free space at next_out
+ * @output_total_len: Total number of bytes output so far
+ * @csum: Checksum value of the uncompressed data
+ * @flush: Flush flag
+ * @format: Format (depends on stream's wrap)
+ * @speed: Speed depends on stream's level
+ * @ccode: Compression code ( stream's strategy)
+ * @lzs_flag: Flag for LZS support
+ * @begin_file: Beginning of file indication for inflate
+ * @history_len: Size of the history data
+ * @end_file: Ending of the file indication for inflate
+ * @compcode: Completion status of the ZIP invocation
+ * @bytes_read: Input bytes read in current instruction
+ * @bits_processed: Total bits processed for entire file
+ * @sizeofptr: To distinguish between ILP32 and LP64
+ * @sizeofzops: Optional just for padding
+ *
+ * This structure is used to maintain the required meta data for the
+ * comp and decomp operations.
+ */
+struct zip_operation {
+ u8 *input;
+ u8 *output;
+ u64 ctx_addr;
+ u64 history;
+
+ u32 input_len;
+ u32 input_total_len;
+
+ u32 output_len;
+ u32 output_total_len;
+
+ u32 csum;
+ u32 flush;
+
+ u32 format;
+ u32 speed;
+ u32 ccode;
+ u32 lzs_flag;
+
+ u32 begin_file;
+ u32 history_len;
+
+ u32 end_file;
+ u32 compcode;
+ u32 bytes_read;
+ u32 bits_processed;
+
+ u32 sizeofptr;
+ u32 sizeofzops;
+};
+
+/* error messages */
+#define zip_err(fmt, args...) pr_err("ZIP ERR:%s():%d: " \
+ fmt "\n", __func__, __LINE__, ## args)
+
+#ifdef MSG_ENABLE
+/* Enable all messages */
+#define zip_msg(fmt, args...) pr_info("ZIP_MSG:" fmt "\n", ## args)
+#else
+#define zip_msg(fmt, args...)
+#endif
+
+#if defined(ZIP_DEBUG_ENABLE) && defined(MSG_ENABLE)
+
+#ifdef DEBUG_LEVEL
+
+#define FILE_NAME (strrchr(__FILE__, '/') ? strrchr(__FILE__, '/') + 1 : \
+ strrchr(__FILE__, '\\') ? strrchr(__FILE__, '\\') + 1 : __FILE__)
+
+#if DEBUG_LEVEL >= 4
+
+#define zip_dbg(fmt, args...) pr_info("ZIP DBG: %s: %s() : %d: " \
+ fmt "\n", FILE_NAME, __func__, __LINE__, ## args)
+
+#elif DEBUG_LEVEL >= 3
+
+#define zip_dbg(fmt, args...) pr_info("ZIP DBG: %s: %s() : %d: " \
+ fmt "\n", FILE_NAME, __func__, __LINE__, ## args)
+
+#elif DEBUG_LEVEL >= 2
+
+#define zip_dbg(fmt, args...) pr_info("ZIP DBG: %s() : %d: " \
+ fmt "\n", __func__, __LINE__, ## args)
+
+#else
+
+#define zip_dbg(fmt, args...) pr_info("ZIP DBG:" fmt "\n", ## args)
+
+#endif /* DEBUG LEVEL >=4 */
+
+#else
+
+#define zip_dbg(fmt, args...) pr_info("ZIP DBG:" fmt "\n", ## args)
+
+#endif /* DEBUG_LEVEL */
+#else
+
+#define zip_dbg(fmt, args...)
+
+#endif /* ZIP_DEBUG_ENABLE && MSG_ENABLE*/
+
+#endif
