media: pci: cx25821: Replace mdelay() with msleep()
cx25821_gpio_init(), cx25821_initialize() and cx25821_registers_init()
are never called in atomic context.
They call mdelay() to busily wait, which is not necessary.
mdelay() can be replaced with msleep().
This is found by a static analysis tool named DCNS written by myself.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
diff --git a/drivers/media/pci/cx25821/cx25821-core.c b/drivers/media/pci/cx25821/cx25821-core.c
index 040c6c2..2f01711 100644
--- a/drivers/media/pci/cx25821/cx25821-core.c
+++ b/drivers/media/pci/cx25821/cx25821-core.c
@@ -428,7 +428,7 @@ static void cx25821_registers_init(struct cx25821_dev *dev)
tmp |= FLD_USE_ALT_PLL_REF;
cx_write(CLK_RST, tmp & ~(FLD_VID_I_CLK_NOE | FLD_VID_J_CLK_NOE));
- mdelay(100);
+ msleep(100);
}
int cx25821_sram_channel_setup(struct cx25821_dev *dev,
@@ -803,7 +803,7 @@ static void cx25821_initialize(struct cx25821_dev *dev)
cx_write(CLK_DELAY, cx_read(CLK_DELAY) & 0x80000000);
cx_write(PAD_CTRL, 0x12); /* for I2C */
cx25821_registers_init(dev); /* init Pecos registers */
- mdelay(100);
+ msleep(100);
for (i = 0; i < VID_CHANNEL_NUM; i++) {
cx25821_set_vip_mode(dev, dev->channels[i].sram_channels);
diff --git a/drivers/media/pci/cx25821/cx25821-gpio.c b/drivers/media/pci/cx25821/cx25821-gpio.c
index 76b8f61..f5ffaf8 100644
--- a/drivers/media/pci/cx25821/cx25821-gpio.c
+++ b/drivers/media/pci/cx25821/cx25821-gpio.c
@@ -88,7 +88,7 @@ void cx25821_gpio_init(struct cx25821_dev *dev)
default:
/* set GPIO 5 to select the path for Medusa/Athena */
cx25821_set_gpiopin_logicvalue(dev, 5, 1);
- mdelay(20);
+ msleep(20);
break;
}
