Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
Revert "ACPI: Fan: Drop force_power_state acpi_device option"
ACPI: EC: "DEBUG" needs to be defined earlier
ACPI: EC: add leading zeros to debug messages
ACPI: EC: fix dmesg spam regression
ACPI: DMI blacklist to reduce console warnings on OSI(Linux) systems.
ACPI: Add ThinkPad R61, ThinkPad T61 to OSI(Linux) white-list
ACPI: make _OSI(Linux) console messages smarter
ACPI: Delete Intel Customer Reference Board (CRB) from OSI(Linux) DMI list
ACPI: on OSI(Linux), print needed DMI rather than requesting dmidecode output
ACPI: create acpi_dmi_dump()
DMI: create dmi_get_slot()
DMI: move dmi_available declaration to linux/dmi.h
ACPI: processor: Fix null pointer dereference in throttling
diff --git a/drivers/acpi/blacklist.c b/drivers/acpi/blacklist.c
index 3ec110c..8809654 100644
--- a/drivers/acpi/blacklist.c
+++ b/drivers/acpi/blacklist.c
@@ -3,6 +3,7 @@
*
* Check to see if the given machine has a known bad ACPI BIOS
* or if the BIOS is too old.
+ * Check given machine against acpi_osi_dmi_table[].
*
* Copyright (C) 2004 Len Brown <len.brown@intel.com>
* Copyright (C) 2002 Andy Grover <andrew.grover@intel.com>
@@ -50,6 +51,8 @@
u32 is_critical_error;
};
+static struct dmi_system_id acpi_osi_dmi_table[] __initdata;
+
/*
* POLICY: If *anything* doesn't work, put it on the blacklist.
* If they are critical errors, mark it critical, and abort driver load.
@@ -165,5 +168,383 @@
blacklisted += blacklist_by_year();
+ dmi_check_system(acpi_osi_dmi_table);
+
return blacklisted;
}
+#ifdef CONFIG_DMI
+static int __init dmi_enable_osi_linux(const struct dmi_system_id *d)
+{
+ acpi_dmi_osi_linux(1, d); /* enable */
+ return 0;
+}
+static int __init dmi_disable_osi_linux(const struct dmi_system_id *d)
+{
+ acpi_dmi_osi_linux(0, d); /* disable */
+ return 0;
+}
+static int __init dmi_unknown_osi_linux(const struct dmi_system_id *d)
+{
+ acpi_dmi_osi_linux(-1, d); /* unknown */
+ return 0;
+}
+
+/*
+ * Most BIOS that invoke OSI(Linux) do nothing with it.
+ * But some cause Linux to break.
+ * Only a couple use it to make Linux run better.
+ *
+ * Thus, Linux should continue to disable OSI(Linux) by default,
+ * should continue to discourage BIOS writers from using it, and
+ * should whitelist the few existing systems that require it.
+ *
+ * If it appears clear a vendor isn't using OSI(Linux)
+ * for anything constructive, blacklist them by name to disable
+ * unnecessary dmesg warnings on all of their products.
+ */
+
+static struct dmi_system_id acpi_osi_dmi_table[] __initdata = {
+ /*
+ * Disable OSI(Linux) warnings on all "Acer, inc."
+ *
+ * _OSI(Linux) disables the latest Windows BIOS code:
+ * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5050"),
+ * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5580"),
+ * DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 3010"),
+ * _OSI(Linux) effect unknown:
+ * DMI_MATCH(DMI_PRODUCT_NAME, "Ferrari 5000"),
+ */
+ {
+ .callback = dmi_disable_osi_linux,
+ .ident = "Acer, inc.",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Acer, inc."),
+ },
+ },
+ /*
+ * Disable OSI(Linux) warnings on all "Acer"
+ *
+ * _OSI(Linux) effect unknown:
+ * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5100"),
+ * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5610"),
+ * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 7720Z"),
+ * DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 5520"),
+ * DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 6460"),
+ * DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 7510"),
+ * DMI_MATCH(DMI_PRODUCT_NAME, "Extensa 5220"),
+ */
+ {
+ .callback = dmi_unknown_osi_linux,
+ .ident = "Acer",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+ },
+ },
+ /*
+ * Disable OSI(Linux) warnings on all "Apple Computer, Inc."
+ *
+ * _OSI(Linux) confirmed to be a NOP:
+ * DMI_MATCH(DMI_PRODUCT_NAME, "MacBook1,1"),
+ * DMI_MATCH(DMI_PRODUCT_NAME, "MacBook2,1"),
+ * DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro2,2"),
+ * _OSI(Linux) effect unknown:
+ * DMI_MATCH(DMI_PRODUCT_NAME, "MacPro2,1"),
+ * DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro1,1"),
+ * DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro3,1"),
+ */
+ {
+ .callback = dmi_disable_osi_linux,
+ .ident = "Apple",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Apple Computer, Inc."),
+ },
+ },
+ /*
+ * Disable OSI(Linux) warnings on all "BenQ"
+ *
+ * _OSI(Linux) confirmed to be a NOP:
+ * DMI_MATCH(DMI_PRODUCT_NAME, "Joybook S31"),
+ */
+ {
+ .callback = dmi_disable_osi_linux,
+ .ident = "BenQ",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "BenQ"),
+ },
+ },
+ /*
+ * Disable OSI(Linux) warnings on all "Clevo Co."
+ *
+ * _OSI(Linux) confirmed to be a NOP:
+ * DMI_MATCH(DMI_PRODUCT_NAME, "M570RU"),
+ */
+ {
+ .callback = dmi_disable_osi_linux,
+ .ident = "Clevo",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Clevo Co."),
+ },
+ },
+ /*
+ * Disable OSI(Linux) warnings on all "COMPAL"
+ *
+ * _OSI(Linux) confirmed to be a NOP:
+ * DMI_MATCH(DMI_BOARD_NAME, "HEL8X"),
+ * _OSI(Linux) unknown effect:
+ * DMI_MATCH(DMI_BOARD_NAME, "IFL91"),
+ */
+ {
+ .callback = dmi_unknown_osi_linux,
+ .ident = "Compal",
+ .matches = {
+ DMI_MATCH(DMI_BIOS_VENDOR, "COMPAL"),
+ },
+ },
+ { /* OSI(Linux) touches USB, breaks suspend to disk */
+ .callback = dmi_disable_osi_linux,
+ .ident = "Dell Dimension 5150",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Dell DM051"),
+ },
+ },
+ { /* OSI(Linux) is a NOP */
+ .callback = dmi_disable_osi_linux,
+ .ident = "Dell",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1501"),
+ },
+ },
+ { /* OSI(Linux) effect unknown */
+ .callback = dmi_unknown_osi_linux,
+ .ident = "Dell",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Latitude D830"),
+ },
+ },
+ { /* OSI(Linux) effect unknown */
+ .callback = dmi_unknown_osi_linux,
+ .ident = "Dell",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex GX620"),
+ },
+ },
+ { /* OSI(Linux) effect unknown */
+ .callback = dmi_unknown_osi_linux,
+ .ident = "Dell",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 1900"),
+ },
+ },
+ { /* OSI(Linux) touches USB */
+ .callback = dmi_disable_osi_linux,
+ .ident = "Dell",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Precision WorkStation 390"),
+ },
+ },
+ { /* OSI(Linux) is a NOP */
+ .callback = dmi_disable_osi_linux,
+ .ident = "Dell Vostro 1000",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Vostro 1000"),
+ },
+ },
+ { /* OSI(Linux) effect unknown */
+ .callback = dmi_unknown_osi_linux,
+ .ident = "Dell",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge SC440"),
+ },
+ },
+ { /* OSI(Linux) effect unknown */
+ .callback = dmi_unknown_osi_linux,
+ .ident = "Dialogue Flybook V5",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dialogue Technology Corporation"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Flybook V5"),
+ },
+ },
+ /*
+ * Disable OSI(Linux) warnings on all "FUJITSU SIEMENS"
+ *
+ * _OSI(Linux) disables latest Windows BIOS code:
+ * DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pa 2510"),
+ * _OSI(Linux) confirmed to be a NOP:
+ * DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pi 1536"),
+ * DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pi 1556"),
+ * DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Xi 1546"),
+ * _OSI(Linux) unknown effect:
+ * DMI_MATCH(DMI_PRODUCT_NAME, "Amilo M1425"),
+ * DMI_MATCH(DMI_PRODUCT_NAME, "Amilo Si 1520"),
+ * DMI_MATCH(DMI_PRODUCT_NAME, "ESPRIMO Mobile V5505"),
+ */
+ {
+ .callback = dmi_disable_osi_linux,
+ .ident = "Fujitsu Siemens",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
+ },
+ },
+ /*
+ * Disable OSI(Linux) warnings on all "Hewlett-Packard"
+ *
+ * _OSI(Linux) confirmed to be a NOP:
+ * .ident = "HP Pavilion tx 1000"
+ * DMI_MATCH(DMI_BOARD_NAME, "30BF"),
+ * .ident = "HP Pavilion dv2000"
+ * DMI_MATCH(DMI_BOARD_NAME, "30B5"),
+ * .ident = "HP Pavilion dv5000",
+ * DMI_MATCH(DMI_BOARD_NAME, "30A7"),
+ * .ident = "HP Pavilion dv6300 30BC",
+ * DMI_MATCH(DMI_BOARD_NAME, "30BC"),
+ * .ident = "HP Pavilion dv6000",
+ * DMI_MATCH(DMI_BOARD_NAME, "30B7"),
+ * DMI_MATCH(DMI_BOARD_NAME, "30B8"),
+ * .ident = "HP Pavilion dv9000",
+ * DMI_MATCH(DMI_BOARD_NAME, "30B9"),
+ * .ident = "HP Pavilion dv9500",
+ * DMI_MATCH(DMI_BOARD_NAME, "30CB"),
+ * .ident = "HP/Compaq Presario C500",
+ * DMI_MATCH(DMI_BOARD_NAME, "30C6"),
+ * .ident = "HP/Compaq Presario F500",
+ * DMI_MATCH(DMI_BOARD_NAME, "30D3"),
+ * _OSI(Linux) unknown effect:
+ * .ident = "HP Pavilion dv6500",
+ * DMI_MATCH(DMI_BOARD_NAME, "30D0"),
+ */
+ {
+ .callback = dmi_disable_osi_linux,
+ .ident = "Hewlett-Packard",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ },
+ },
+ /*
+ * Lenovo has a mix of systems OSI(Linux) situations
+ * and thus we can not wildcard the vendor.
+ *
+ * _OSI(Linux) helps sound
+ * DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad R61"),
+ * DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad T61"),
+ * _OSI(Linux) is a NOP:
+ * DMI_MATCH(DMI_PRODUCT_VERSION, "3000 N100"),
+ */
+ {
+ .callback = dmi_enable_osi_linux,
+ .ident = "Lenovo ThinkPad R61",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad R61"),
+ },
+ },
+ {
+ .callback = dmi_enable_osi_linux,
+ .ident = "Lenovo ThinkPad T61",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad T61"),
+ },
+ },
+ {
+ .callback = dmi_unknown_osi_linux,
+ .ident = "Lenovo 3000 V100",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "LENOVO3000 V100"),
+ },
+ },
+ {
+ .callback = dmi_disable_osi_linux,
+ .ident = "Lenovo 3000 N100",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "3000 N100"),
+ },
+ },
+ /*
+ * Disable OSI(Linux) warnings on all "LG Electronics"
+ *
+ * _OSI(Linux) confirmed to be a NOP:
+ * DMI_MATCH(DMI_PRODUCT_NAME, "P1-J150B"),
+ */
+ {
+ .callback = dmi_disable_osi_linux,
+ .ident = "LG",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LG Electronics"),
+ },
+ },
+ /* NEC - OSI(Linux) effect unknown */
+ {
+ .callback = dmi_unknown_osi_linux,
+ .ident = "NEC VERSA M360",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "NEC Computers SAS"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "NEC VERSA M360"),
+ },
+ },
+ /*
+ * Disable OSI(Linux) warnings on all "Samsung Electronics"
+ *
+ * OSI(Linux) disables PNP0C32 and other BIOS code for Windows:
+ * DMI_MATCH(DMI_PRODUCT_NAME, "R40P/R41P"),
+ * DMI_MATCH(DMI_PRODUCT_NAME, "R59P/R60P/R61P"),
+ */
+ {
+ .callback = dmi_disable_osi_linux,
+ .ident = "Samsung",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
+ },
+ },
+ /*
+ * Disable OSI(Linux) warnings on all "Sony Corporation"
+ *
+ * _OSI(Linux) is a NOP:
+ * DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SZ650N"),
+ * DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SZ38GP_C"),
+ * DMI_MATCH(DMI_PRODUCT_NAME, "VGN-TZ21MN_N"),
+ * _OSI(Linux) unknown effect:
+ * DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FZ11M"),
+ */
+ {
+ .callback = dmi_unknown_osi_linux,
+ .ident = "Sony",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+ },
+ },
+ /*
+ * Disable OSI(Linux) warnings on all "TOSHIBA"
+ *
+ * _OSI(Linux) breaks sound (bugzilla 7787):
+ * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite P100"),
+ * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite P105"),
+ * _OSI(Linux) is a NOP:
+ * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite A100"),
+ * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite A210"),
+ * _OSI(Linux) unknown effect:
+ * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite A135"),
+ * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite A200"),
+ * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite P205"),
+ * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite U305"),
+ */
+ {
+ .callback = dmi_disable_osi_linux,
+ .ident = "Toshiba",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+ },
+ },
+ {}
+};
+
+#endif /* CONFIG_DMI */
diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
index d7a115c..f4487c3 100644
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -200,7 +200,7 @@
* Get device's current power state
*/
acpi_bus_get_power(device->handle, &device->power.state);
- if (state == device->power.state) {
+ if ((state == device->power.state) && !device->flags.force_power_state) {
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device is already at D%d\n",
state));
return 0;
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index 97dc161..987b967 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -26,6 +26,9 @@
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*/
+/* Uncomment next line to get verbose print outs*/
+/* #define DEBUG */
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
@@ -47,9 +50,6 @@
#undef PREFIX
#define PREFIX "ACPI: EC: "
-/* Uncomment next line to get verbose print outs*/
-/* #define DEBUG */
-
/* EC status register */
#define ACPI_EC_FLAG_OBF 0x01 /* Output buffer full */
#define ACPI_EC_FLAG_IBF 0x02 /* Input buffer full */
@@ -82,6 +82,7 @@
EC_FLAGS_ADDRESS, /* Address is being written */
EC_FLAGS_NO_WDATA_GPE, /* Don't expect WDATA GPE event */
EC_FLAGS_WDATA, /* Data is being written */
+ EC_FLAGS_NO_OBF1_GPE, /* Don't expect GPE before read */
};
static int acpi_ec_remove(struct acpi_device *device, int type);
@@ -138,26 +139,26 @@
static inline u8 acpi_ec_read_status(struct acpi_ec *ec)
{
u8 x = inb(ec->command_addr);
- pr_debug(PREFIX "---> status = 0x%2x\n", x);
+ pr_debug(PREFIX "---> status = 0x%2.2x\n", x);
return x;
}
static inline u8 acpi_ec_read_data(struct acpi_ec *ec)
{
u8 x = inb(ec->data_addr);
- pr_debug(PREFIX "---> data = 0x%2x\n", x);
+ pr_debug(PREFIX "---> data = 0x%2.2x\n", x);
return inb(ec->data_addr);
}
static inline void acpi_ec_write_cmd(struct acpi_ec *ec, u8 command)
{
- pr_debug(PREFIX "<--- command = 0x%2x\n", command);
+ pr_debug(PREFIX "<--- command = 0x%2.2x\n", command);
outb(command, ec->command_addr);
}
static inline void acpi_ec_write_data(struct acpi_ec *ec, u8 data)
{
- pr_debug(PREFIX "<--- data = 0x%2x\n", data);
+ pr_debug(PREFIX "<--- data = 0x%2.2x\n", data);
outb(data, ec->data_addr);
}
@@ -179,6 +180,10 @@
static int acpi_ec_wait(struct acpi_ec *ec, enum ec_event event, int force_poll)
{
int ret = 0;
+
+ if (unlikely(event == ACPI_EC_EVENT_OBF_1 &&
+ test_bit(EC_FLAGS_NO_OBF1_GPE, &ec->flags)))
+ force_poll = 1;
if (unlikely(test_bit(EC_FLAGS_ADDRESS, &ec->flags) &&
test_bit(EC_FLAGS_NO_ADDRESS_GPE, &ec->flags)))
force_poll = 1;
@@ -192,7 +197,12 @@
goto end;
clear_bit(EC_FLAGS_WAIT_GPE, &ec->flags);
if (acpi_ec_check_status(ec, event)) {
- if (test_bit(EC_FLAGS_ADDRESS, &ec->flags)) {
+ if (event == ACPI_EC_EVENT_OBF_1) {
+ /* miss OBF_1 GPE, don't expect it */
+ pr_info(PREFIX "missing OBF confirmation, "
+ "don't expect it any longer.\n");
+ set_bit(EC_FLAGS_NO_OBF1_GPE, &ec->flags);
+ } else if (test_bit(EC_FLAGS_ADDRESS, &ec->flags)) {
/* miss address GPE, don't expect it anymore */
pr_info(PREFIX "missing address confirmation, "
"don't expect it any longer.\n");
diff --git a/drivers/acpi/fan.c b/drivers/acpi/fan.c
index a5a5532..a6e149d 100644
--- a/drivers/acpi/fan.c
+++ b/drivers/acpi/fan.c
@@ -47,6 +47,8 @@
static int acpi_fan_add(struct acpi_device *device);
static int acpi_fan_remove(struct acpi_device *device, int type);
+static int acpi_fan_suspend(struct acpi_device *device, pm_message_t state);
+static int acpi_fan_resume(struct acpi_device *device);
static const struct acpi_device_id fan_device_ids[] = {
{"PNP0C0B", 0},
@@ -61,6 +63,8 @@
.ops = {
.add = acpi_fan_add,
.remove = acpi_fan_remove,
+ .suspend = acpi_fan_suspend,
+ .resume = acpi_fan_resume,
},
};
@@ -191,6 +195,10 @@
goto end;
}
+ device->flags.force_power_state = 1;
+ acpi_bus_set_power(device->handle, state);
+ device->flags.force_power_state = 0;
+
result = acpi_fan_add_fs(device);
if (result)
goto end;
@@ -216,6 +224,38 @@
return 0;
}
+static int acpi_fan_suspend(struct acpi_device *device, pm_message_t state)
+{
+ if (!device)
+ return -EINVAL;
+
+ acpi_bus_set_power(device->handle, ACPI_STATE_D0);
+
+ return AE_OK;
+}
+
+static int acpi_fan_resume(struct acpi_device *device)
+{
+ int result = 0;
+ int power_state = 0;
+
+ if (!device)
+ return -EINVAL;
+
+ result = acpi_bus_get_power(device->handle, &power_state);
+ if (result) {
+ ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
+ "Error reading fan power state\n"));
+ return result;
+ }
+
+ device->flags.force_power_state = 1;
+ acpi_bus_set_power(device->handle, power_state);
+ device->flags.force_power_state = 0;
+
+ return result;
+}
+
static int __init acpi_fan_init(void)
{
int result = 0;
diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c
index e3a673a..e53fb51 100644
--- a/drivers/acpi/osl.c
+++ b/drivers/acpi/osl.c
@@ -77,11 +77,55 @@
#define OSI_STRING_LENGTH_MAX 64 /* arbitrary */
static char osi_additional_string[OSI_STRING_LENGTH_MAX];
-static int osi_linux; /* disable _OSI(Linux) by default */
+/*
+ * "Ode to _OSI(Linux)"
+ *
+ * osi_linux -- Control response to BIOS _OSI(Linux) query.
+ *
+ * As Linux evolves, the features that it supports change.
+ * So an OSI string such as "Linux" is not specific enough
+ * to be useful across multiple versions of Linux. It
+ * doesn't identify any particular feature, interface,
+ * or even any particular version of Linux...
+ *
+ * Unfortunately, Linux-2.6.22 and earlier responded "yes"
+ * to a BIOS _OSI(Linux) query. When
+ * a reference mobile BIOS started using it, its use
+ * started to spread to many vendor platforms.
+ * As it is not supportable, we need to halt that spread.
+ *
+ * Today, most BIOS references to _OSI(Linux) are noise --
+ * they have no functional effect and are just dead code
+ * carried over from the reference BIOS.
+ *
+ * The next most common case is that _OSI(Linux) harms Linux,
+ * usually by causing the BIOS to follow paths that are
+ * not tested during Windows validation.
+ *
+ * Finally, there is a short list of platforms
+ * where OSI(Linux) benefits Linux.
+ *
+ * In Linux-2.6.23, OSI(Linux) is first disabled by default.
+ * DMI is used to disable the dmesg warning about OSI(Linux)
+ * on platforms where it is known to have no effect.
+ * But a dmesg warning remains for systems where
+ * we do not know if OSI(Linux) is good or bad for the system.
+ * DMI is also used to enable OSI(Linux) for the machines
+ * that are known to need it.
+ *
+ * BIOS writers should NOT query _OSI(Linux) on future systems.
+ * It will be ignored by default, and to get Linux to
+ * not ignore it will require a kernel source update to
+ * add a DMI entry, or a boot-time "acpi_osi=Linux" invocation.
+ */
+#define OSI_LINUX_ENABLE 0
-#ifdef CONFIG_DMI
-static struct __initdata dmi_system_id acpi_osl_dmi_table[];
-#endif
+struct osi_linux {
+ unsigned int enable:1;
+ unsigned int dmi:1;
+ unsigned int cmdline:1;
+ unsigned int known:1;
+} osi_linux = { OSI_LINUX_ENABLE, 0, 0, 0};
static void __init acpi_request_region (struct acpi_generic_address *addr,
unsigned int length, char *desc)
@@ -133,7 +177,6 @@
acpi_status __init acpi_os_initialize(void)
{
- dmi_check_system(acpi_osl_dmi_table);
return AE_OK;
}
@@ -964,13 +1007,37 @@
__setup("acpi_os_name=", acpi_os_name_setup);
-static void enable_osi_linux(int enable) {
+static void __init set_osi_linux(unsigned int enable)
+{
+ if (osi_linux.enable != enable) {
+ osi_linux.enable = enable;
+ printk(KERN_NOTICE PREFIX "%sed _OSI(Linux)\n",
+ enable ? "Add": "Delet");
+ }
+ return;
+}
- if (osi_linux != enable)
- printk(KERN_INFO PREFIX "%sabled _OSI(Linux)\n",
- enable ? "En": "Dis");
+static void __init acpi_cmdline_osi_linux(unsigned int enable)
+{
+ osi_linux.cmdline = 1; /* cmdline set the default */
+ set_osi_linux(enable);
- osi_linux = enable;
+ return;
+}
+
+void __init acpi_dmi_osi_linux(int enable, const struct dmi_system_id *d)
+{
+ osi_linux.dmi = 1; /* DMI knows that this box asks OSI(Linux) */
+
+ printk(KERN_NOTICE PREFIX "DMI detected: %s\n", d->ident);
+
+ if (enable == -1)
+ return;
+
+ osi_linux.known = 1; /* DMI knows which OSI(Linux) default needed */
+
+ set_osi_linux(enable);
+
return;
}
@@ -987,12 +1054,12 @@
printk(KERN_INFO PREFIX "_OSI method disabled\n");
acpi_gbl_create_osi_method = FALSE;
} else if (!strcmp("!Linux", str)) {
- enable_osi_linux(0);
+ acpi_cmdline_osi_linux(0); /* !enable */
} else if (*str == '!') {
if (acpi_osi_invalidate(++str) == AE_OK)
printk(KERN_INFO PREFIX "Deleted _OSI(%s)\n", str);
} else if (!strcmp("Linux", str)) {
- enable_osi_linux(1);
+ acpi_cmdline_osi_linux(1); /* enable */
} else if (*osi_additional_string == '\0') {
strncpy(osi_additional_string, str, OSI_STRING_LENGTH_MAX);
printk(KERN_INFO PREFIX "Added _OSI(%s)\n", str);
@@ -1141,6 +1208,34 @@
return (AE_OK);
}
+/**
+ * acpi_dmi_dump - dump DMI slots needed for blacklist entry
+ *
+ * Returns 0 on success
+ */
+int acpi_dmi_dump(void)
+{
+
+ if (!dmi_available)
+ return -1;
+
+ printk(KERN_NOTICE PREFIX "DMI System Vendor: %s\n",
+ dmi_get_slot(DMI_SYS_VENDOR));
+ printk(KERN_NOTICE PREFIX "DMI Product Name: %s\n",
+ dmi_get_slot(DMI_PRODUCT_NAME));
+ printk(KERN_NOTICE PREFIX "DMI Product Version: %s\n",
+ dmi_get_slot(DMI_PRODUCT_VERSION));
+ printk(KERN_NOTICE PREFIX "DMI Board Name: %s\n",
+ dmi_get_slot(DMI_BOARD_NAME));
+ printk(KERN_NOTICE PREFIX "DMI BIOS Vendor: %s\n",
+ dmi_get_slot(DMI_BIOS_VENDOR));
+ printk(KERN_NOTICE PREFIX "DMI BIOS Date: %s\n",
+ dmi_get_slot(DMI_BIOS_DATE));
+
+ return 0;
+}
+
+
/******************************************************************************
*
* FUNCTION: acpi_os_validate_interface
@@ -1160,13 +1255,29 @@
if (!strncmp(osi_additional_string, interface, OSI_STRING_LENGTH_MAX))
return AE_OK;
if (!strcmp("Linux", interface)) {
- printk(KERN_WARNING PREFIX
- "System BIOS is requesting _OSI(Linux)\n");
- printk(KERN_WARNING PREFIX
- "If \"acpi_osi=Linux\" works better,\n"
- "Please send dmidecode "
- "to linux-acpi@vger.kernel.org\n");
- if(osi_linux)
+
+ printk(KERN_NOTICE PREFIX
+ "BIOS _OSI(Linux) query %s%s\n",
+ osi_linux.enable ? "honored" : "ignored",
+ osi_linux.cmdline ? " via cmdline" :
+ osi_linux.dmi ? " via DMI" : "");
+
+ if (!osi_linux.dmi) {
+ if (acpi_dmi_dump())
+ printk(KERN_NOTICE PREFIX
+ "[please extract dmidecode output]\n");
+ printk(KERN_NOTICE PREFIX
+ "Please send DMI info above to "
+ "linux-acpi@vger.kernel.org\n");
+ }
+ if (!osi_linux.known && !osi_linux.cmdline) {
+ printk(KERN_NOTICE PREFIX
+ "If \"acpi_osi=%sLinux\" works better, "
+ "please notify linux-acpi@vger.kernel.org\n",
+ osi_linux.enable ? "!" : "");
+ }
+
+ if (osi_linux.enable)
return AE_OK;
}
return AE_SUPPORT;
@@ -1198,28 +1309,4 @@
return AE_OK;
}
-#ifdef CONFIG_DMI
-static int dmi_osi_linux(const struct dmi_system_id *d)
-{
- printk(KERN_NOTICE "%s detected: enabling _OSI(Linux)\n", d->ident);
- enable_osi_linux(1);
- return 0;
-}
-
-static struct dmi_system_id acpi_osl_dmi_table[] __initdata = {
- /*
- * Boxes that need _OSI(Linux)
- */
- {
- .callback = dmi_osi_linux,
- .ident = "Intel Napa CRB",
- .matches = {
- DMI_MATCH(DMI_BOARD_VENDOR, "Intel Corporation"),
- DMI_MATCH(DMI_BOARD_NAME, "MPAD-MSAE Customer Reference Boards"),
- },
- },
- {}
-};
-#endif /* CONFIG_DMI */
-
#endif
diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c
index 6742d7b..1685b40a 100644
--- a/drivers/acpi/processor_throttling.c
+++ b/drivers/acpi/processor_throttling.c
@@ -775,12 +775,12 @@
acpi_processor_get_throttling_states(pr) ||
acpi_processor_get_platform_limit(pr))
{
- if (acpi_processor_get_fadt_info(pr))
- return 0;
pr->throttling.acpi_processor_get_throttling =
&acpi_processor_get_throttling_fadt;
pr->throttling.acpi_processor_set_throttling =
&acpi_processor_set_throttling_fadt;
+ if (acpi_processor_get_fadt_info(pr))
+ return 0;
} else {
pr->throttling.acpi_processor_get_throttling =
&acpi_processor_get_throttling_ptc;
diff --git a/drivers/firmware/dmi-id.c b/drivers/firmware/dmi-id.c
index bc132d8..313c99c 100644
--- a/drivers/firmware/dmi-id.c
+++ b/drivers/firmware/dmi-id.c
@@ -173,8 +173,6 @@
if (dmi_get_system_info(_field)) \
sys_dmi_attributes[i++] = &sys_dmi_##_name##_attr.dev_attr.attr;
-extern int dmi_available;
-
/* In a separate function to keep gcc 3.2 happy - do NOT merge this in
dmi_id_init! */
static void __init dmi_id_init_attr_table(void)
diff --git a/drivers/firmware/dmi_scan.c b/drivers/firmware/dmi_scan.c
index 0cdadea..5e596a7 100644
--- a/drivers/firmware/dmi_scan.c
+++ b/drivers/firmware/dmi_scan.c
@@ -470,3 +470,11 @@
return year;
}
+/**
+ * dmi_get_slot - return dmi_ident[slot]
+ * @slot: index into dmi_ident[]
+ */
+char *dmi_get_slot(int slot)
+{
+ return(dmi_ident[slot]);
+}
diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h
index 19c3ead..7b74b60 100644
--- a/include/acpi/acpi_bus.h
+++ b/include/acpi/acpi_bus.h
@@ -168,7 +168,8 @@
u32 power_manageable:1;
u32 performance_manageable:1;
u32 wake_capable:1; /* Wakeup(_PRW) supported? */
- u32 reserved:20;
+ u32 force_power_state:1;
+ u32 reserved:19;
};
/* File System */
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index e3c16c9..63f2e6e 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -40,6 +40,7 @@
#include <acpi/acpi_drivers.h>
#include <acpi/acpi_numa.h>
#include <asm/acpi.h>
+#include <linux/dmi.h>
#ifdef CONFIG_ACPI
@@ -192,7 +193,9 @@
#endif /*CONFIG_ACPI_EC*/
extern int acpi_blacklisted(void);
-extern void acpi_bios_year(char *s);
+#ifdef CONFIG_DMI
+extern void acpi_dmi_osi_linux(int enable, const struct dmi_system_id *d);
+#endif
#ifdef CONFIG_ACPI_NUMA
int acpi_get_pxm(acpi_handle handle);
@@ -226,5 +229,5 @@
return 0;
}
-#endif /* CONFIG_ACPI */
+#endif /* !CONFIG_ACPI */
#endif /*_LINUX_ACPI_H*/
diff --git a/include/linux/dmi.h b/include/linux/dmi.h
index 00fc7a9..5b42a65 100644
--- a/include/linux/dmi.h
+++ b/include/linux/dmi.h
@@ -78,6 +78,8 @@
extern void dmi_scan_machine(void);
extern int dmi_get_year(int field);
extern int dmi_name_in_vendors(const char *str);
+extern int dmi_available;
+extern char *dmi_get_slot(int slot);
#else
@@ -87,6 +89,8 @@
const struct dmi_device *from) { return NULL; }
static inline int dmi_get_year(int year) { return 0; }
static inline int dmi_name_in_vendors(const char *s) { return 0; }
+#define dmi_available 0
+static inline char *dmi_get_slot(int slot) { return NULL; }
#endif
