/*
 *************************************************************************
 * Ralink Tech Inc.
 * 5F., No.36, Taiyuan St., Jhubei City,
 * Hsinchu County 302,
 * Taiwan, R.O.C.
 *
 * (c) Copyright 2002-2007, Ralink Technology, Inc.
 *
 * This program is free software; you can redistribute it and/or modify  *
 * it under the terms of the GNU General Public License as published by  *
 * the Free Software Foundation; either version 2 of the License, or     *
 * (at your option) any later version.                                   *
 *                                                                       *
 * This program is distributed in the hope that it will be useful,       *
 * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
 * GNU General Public License for more details.                          *
 *                                                                       *
 * You should have received a copy of the GNU General Public License     *
 * along with this program; if not, write to the                         *
 * Free Software Foundation, Inc.,                                       *
 * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
 *                                                                       *
 *************************************************************************
*/

#include "../rt_config.h"

#define MAX_TX_IN_TBTT		(16)


UCHAR	SNAP_802_1H[] = {0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00};
UCHAR	SNAP_BRIDGE_TUNNEL[] = {0xaa, 0xaa, 0x03, 0x00, 0x00, 0xf8};
// Add Cisco Aironet SNAP heade for CCX2 support
UCHAR	SNAP_AIRONET[] = {0xaa, 0xaa, 0x03, 0x00, 0x40, 0x96, 0x00, 0x00};
UCHAR	CKIP_LLC_SNAP[] = {0xaa, 0xaa, 0x03, 0x00, 0x40, 0x96, 0x00, 0x02};
UCHAR	EAPOL_LLC_SNAP[]= {0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00, 0x88, 0x8e};
UCHAR	EAPOL[] = {0x88, 0x8e};
UCHAR   TPID[] = {0x81, 0x00}; /* VLAN related */

UCHAR	IPX[] = {0x81, 0x37};
UCHAR	APPLE_TALK[] = {0x80, 0xf3};
UCHAR	RateIdToPlcpSignal[12] = {
	 0, /* RATE_1 */	1, /* RATE_2 */ 	2, /* RATE_5_5 */	3, /* RATE_11 */	// see BBP spec
	11, /* RATE_6 */   15, /* RATE_9 */    10, /* RATE_12 */   14, /* RATE_18 */	// see IEEE802.11a-1999 p.14
	 9, /* RATE_24 */  13, /* RATE_36 */	8, /* RATE_48 */   12  /* RATE_54 */ }; // see IEEE802.11a-1999 p.14

UCHAR	 OfdmSignalToRateId[16] = {
	RATE_54,  RATE_54,	RATE_54,  RATE_54,	// OFDM PLCP Signal = 0,  1,  2,  3 respectively
	RATE_54,  RATE_54,	RATE_54,  RATE_54,	// OFDM PLCP Signal = 4,  5,  6,  7 respectively
	RATE_48,  RATE_24,	RATE_12,  RATE_6,	// OFDM PLCP Signal = 8,  9,  10, 11 respectively
	RATE_54,  RATE_36,	RATE_18,  RATE_9,	// OFDM PLCP Signal = 12, 13, 14, 15 respectively
};

UCHAR	 OfdmRateToRxwiMCS[12] = {
	0,  0,	0,  0,
	0,  1,	2,  3,	// OFDM rate 6,9,12,18 = rxwi mcs 0,1,2,3
	4,  5,	6,  7,	// OFDM rate 24,36,48,54 = rxwi mcs 4,5,6,7
};
UCHAR	 RxwiMCSToOfdmRate[12] = {
	RATE_6,  RATE_9,	RATE_12,  RATE_18,
	RATE_24,  RATE_36,	RATE_48,  RATE_54,	// OFDM rate 6,9,12,18 = rxwi mcs 0,1,2,3
	4,  5,	6,  7,	// OFDM rate 24,36,48,54 = rxwi mcs 4,5,6,7
};

char*   MCSToMbps[] = {"1Mbps","2Mbps","5.5Mbps","11Mbps","06Mbps","09Mbps","12Mbps","18Mbps","24Mbps","36Mbps","48Mbps","54Mbps","MM-0","MM-1","MM-2","MM-3","MM-4","MM-5","MM-6","MM-7","MM-8","MM-9","MM-10","MM-11","MM-12","MM-13","MM-14","MM-15","MM-32","ee1","ee2","ee3"};

UCHAR default_cwmin[]={CW_MIN_IN_BITS, CW_MIN_IN_BITS, CW_MIN_IN_BITS-1, CW_MIN_IN_BITS-2};
//UCHAR default_cwmax[]={CW_MAX_IN_BITS, CW_MAX_IN_BITS, CW_MIN_IN_BITS, CW_MIN_IN_BITS-1};
UCHAR default_sta_aifsn[]={3,7,2,2};

UCHAR MapUserPriorityToAccessCategory[8] = {QID_AC_BE, QID_AC_BK, QID_AC_BK, QID_AC_BE, QID_AC_VI, QID_AC_VI, QID_AC_VO, QID_AC_VO};


/*
	========================================================================

	Routine Description:
		API for MLME to transmit management frame to AP (BSS Mode)
	or station (IBSS Mode)

	Arguments:
		pAd Pointer to our adapter
		pData		Pointer to the outgoing 802.11 frame
		Length		Size of outgoing management frame

	Return Value:
		NDIS_STATUS_FAILURE
		NDIS_STATUS_PENDING
		NDIS_STATUS_SUCCESS

	IRQL = PASSIVE_LEVEL
	IRQL = DISPATCH_LEVEL

	Note:

	========================================================================
*/
NDIS_STATUS MiniportMMRequest(
	IN	PRTMP_ADAPTER	pAd,
	IN	UCHAR			QueIdx,
	IN	PUCHAR			pData,
	IN	UINT			Length)
{
	PNDIS_PACKET	pPacket;
	NDIS_STATUS  	Status = NDIS_STATUS_SUCCESS;
	ULONG	 		FreeNum;
	UCHAR			IrqState;
	UCHAR			rtmpHwHdr[TXINFO_SIZE + TXWI_SIZE]; //RTMP_HW_HDR_LEN];

	ASSERT(Length <= MGMT_DMA_BUFFER_SIZE);

	QueIdx=3;

	// 2860C use Tx Ring

	IrqState = pAd->irq_disabled;

	do
	{
		// Reset is in progress, stop immediately
		if ( RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS) ||
			 RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS | fRTMP_ADAPTER_NIC_NOT_EXIST)||
			 !RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_START_UP))
		{
			Status = NDIS_STATUS_FAILURE;
			break;
		}

		// Check Free priority queue
		// Since we use PBF Queue2 for management frame.  Its corresponding DMA ring should be using TxRing.

		// 2860C use Tx Ring
		if (pAd->MACVersion == 0x28600100)
		{
			FreeNum = GET_TXRING_FREENO(pAd, QueIdx);
		}
		else
		{
			FreeNum = GET_MGMTRING_FREENO(pAd);
		}

		if ((FreeNum > 0))
		{
			// We need to reserve space for rtmp hardware header. i.e., TxWI for RT2860 and TxInfo+TxWI for RT2870
			NdisZeroMemory(&rtmpHwHdr, (TXINFO_SIZE + TXWI_SIZE));
			Status = RTMPAllocateNdisPacket(pAd, &pPacket, (PUCHAR)&rtmpHwHdr, (TXINFO_SIZE + TXWI_SIZE), pData, Length);
			if (Status != NDIS_STATUS_SUCCESS)
			{
				DBGPRINT(RT_DEBUG_WARN, ("MiniportMMRequest (error:: can't allocate NDIS PACKET)\n"));
				break;
			}

			//pAd->CommonCfg.MlmeTransmit.field.MODE = MODE_CCK;
			//pAd->CommonCfg.MlmeRate = RATE_2;


			Status = MlmeHardTransmit(pAd, QueIdx, pPacket);
			if (Status != NDIS_STATUS_SUCCESS)
				RTMPFreeNdisPacket(pAd, pPacket);
		}
		else
		{
			pAd->RalinkCounters.MgmtRingFullCount++;
			DBGPRINT(RT_DEBUG_ERROR, ("Qidx(%d), not enough space in MgmtRing, MgmtRingFullCount=%ld!\n",
										QueIdx, pAd->RalinkCounters.MgmtRingFullCount));
		}

	} while (FALSE);


	return Status;
}


NDIS_STATUS MlmeDataHardTransmit(
	IN	PRTMP_ADAPTER	pAd,
	IN	UCHAR	QueIdx,
	IN	PNDIS_PACKET	pPacket);

#define MAX_DATAMM_RETRY	3
/*
	========================================================================

	Routine Description:
		API for MLME to transmit management frame to AP (BSS Mode)
	or station (IBSS Mode)

	Arguments:
		pAd Pointer to our adapter
		pData		Pointer to the outgoing 802.11 frame
		Length		Size of outgoing management frame

	Return Value:
		NDIS_STATUS_FAILURE
		NDIS_STATUS_PENDING
		NDIS_STATUS_SUCCESS

	IRQL = PASSIVE_LEVEL
	IRQL = DISPATCH_LEVEL

	Note:

	========================================================================
*/
NDIS_STATUS MiniportDataMMRequest(
							 IN  PRTMP_ADAPTER   pAd,
							 IN  UCHAR           QueIdx,
							 IN  PUCHAR          pData,
							 IN  UINT            Length)
{
	PNDIS_PACKET    pPacket;
	NDIS_STATUS  Status = NDIS_STATUS_SUCCESS;
	ULONG    FreeNum;
	int 	retry = 0;
	UCHAR           IrqState;
	UCHAR			rtmpHwHdr[TXINFO_SIZE + TXWI_SIZE]; //RTMP_HW_HDR_LEN];

	ASSERT(Length <= MGMT_DMA_BUFFER_SIZE);

	// 2860C use Tx Ring
	IrqState = pAd->irq_disabled;

	do
	{
		// Reset is in progress, stop immediately
		if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS) ||
			 RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS | fRTMP_ADAPTER_NIC_NOT_EXIST)||
			!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_START_UP))
		{
			Status = NDIS_STATUS_FAILURE;
			break;
		}

		// Check Free priority queue
		// Since we use PBF Queue2 for management frame.  Its corresponding DMA ring should be using TxRing.

		// 2860C use Tx Ring

		// free Tx(QueIdx) resources
		FreeNum = GET_TXRING_FREENO(pAd, QueIdx);

		if ((FreeNum > 0))
		{
			// We need to reserve space for rtmp hardware header. i.e., TxWI for RT2860 and TxInfo+TxWI for RT2870
			NdisZeroMemory(&rtmpHwHdr, (TXINFO_SIZE + TXWI_SIZE));
			Status = RTMPAllocateNdisPacket(pAd, &pPacket, (PUCHAR)&rtmpHwHdr, (TXINFO_SIZE + TXWI_SIZE), pData, Length);
			if (Status != NDIS_STATUS_SUCCESS)
			{
				DBGPRINT(RT_DEBUG_WARN, ("MiniportMMRequest (error:: can't allocate NDIS PACKET)\n"));
				break;
			}

			//pAd->CommonCfg.MlmeTransmit.field.MODE = MODE_CCK;
			//pAd->CommonCfg.MlmeRate = RATE_2;


			Status = MlmeDataHardTransmit(pAd, QueIdx, pPacket);
			if (Status != NDIS_STATUS_SUCCESS)
				RTMPFreeNdisPacket(pAd, pPacket);
			retry = MAX_DATAMM_RETRY;
		}
		else
		{
			retry ++;

			printk("retry %d\n", retry);
			pAd->RalinkCounters.MgmtRingFullCount++;

			if (retry >= MAX_DATAMM_RETRY)
			{
				DBGPRINT(RT_DEBUG_ERROR, ("Qidx(%d), not enough space in DataRing, MgmtRingFullCount=%ld!\n",
											QueIdx, pAd->RalinkCounters.MgmtRingFullCount));
			}
		}

	} while (retry < MAX_DATAMM_RETRY);


	return Status;
}


/*
	========================================================================

	Routine Description:
		Copy frame from waiting queue into relative ring buffer and set
	appropriate ASIC register to kick hardware transmit function

	Arguments:
		pAd Pointer to our adapter
		pBuffer 	Pointer to	memory of outgoing frame
		Length		Size of outgoing management frame

	Return Value:
		NDIS_STATUS_FAILURE
		NDIS_STATUS_PENDING
		NDIS_STATUS_SUCCESS

	IRQL = PASSIVE_LEVEL
	IRQL = DISPATCH_LEVEL

	Note:

	========================================================================
*/
NDIS_STATUS MlmeHardTransmit(
	IN	PRTMP_ADAPTER	pAd,
	IN	UCHAR			QueIdx,
	IN	PNDIS_PACKET	pPacket)
{
	if ((pAd->CommonCfg.RadarDetect.RDMode != RD_NORMAL_MODE)
#ifdef CARRIER_DETECTION_SUPPORT
#endif // CARRIER_DETECTION_SUPPORT //
		)
	{
		return NDIS_STATUS_FAILURE;
	}

		return MlmeHardTransmitMgmtRing(pAd,QueIdx,pPacket);

}

NDIS_STATUS MlmeDataHardTransmit(
	IN	PRTMP_ADAPTER	pAd,
	IN	UCHAR	QueIdx,
	IN	PNDIS_PACKET	pPacket)
{
	if ((pAd->CommonCfg.RadarDetect.RDMode != RD_NORMAL_MODE)
#ifdef CARRIER_DETECTION_SUPPORT
#endif // CARRIER_DETECTION_SUPPORT //
		)
	{
		return NDIS_STATUS_FAILURE;
	}

#ifdef RT2870
	return MlmeHardTransmitMgmtRing(pAd,QueIdx,pPacket);
#endif // RT2870 //
}


NDIS_STATUS MlmeHardTransmitMgmtRing(
	IN	PRTMP_ADAPTER	pAd,
	IN	UCHAR	QueIdx,
	IN	PNDIS_PACKET	pPacket)
{
	PACKET_INFO 	PacketInfo;
	PUCHAR			pSrcBufVA;
	UINT			SrcBufLen;
	PHEADER_802_11	pHeader_802_11;
	BOOLEAN 		bAckRequired, bInsertTimestamp;
	UCHAR			MlmeRate;
	PTXWI_STRUC 	pFirstTxWI;
	MAC_TABLE_ENTRY	*pMacEntry = NULL;

	RTMP_QueryPacketInfo(pPacket, &PacketInfo, &pSrcBufVA, &SrcBufLen);

	// Make sure MGMT ring resource won't be used by other threads
// sample, for IRQ LOCK -> SEM LOCK
//	IrqState = pAd->irq_disabled;
//	if (!IrqState)
		RTMP_SEM_LOCK(&pAd->MgmtRingLock);


	if (pSrcBufVA == NULL)
	{
		// The buffer shouldn't be NULL
//		if (!IrqState)
			RTMP_SEM_UNLOCK(&pAd->MgmtRingLock);
		return NDIS_STATUS_FAILURE;
	}

#ifdef CONFIG_STA_SUPPORT
	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
	{
		// outgoing frame always wakeup PHY to prevent frame lost
		if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
			AsicForceWakeup(pAd, TRUE);
	}
#endif // CONFIG_STA_SUPPORT //

	pFirstTxWI = (PTXWI_STRUC)(pSrcBufVA +  TXINFO_SIZE);
	pHeader_802_11 = (PHEADER_802_11) (pSrcBufVA + TXINFO_SIZE + TXWI_SIZE); //TXWI_SIZE);

	if (pHeader_802_11->Addr1[0] & 0x01)
	{
		MlmeRate = pAd->CommonCfg.BasicMlmeRate;
	}
	else
	{
		MlmeRate = pAd->CommonCfg.MlmeRate;
	}

	// Verify Mlme rate for a / g bands.
	if ((pAd->LatchRfRegs.Channel > 14) && (MlmeRate < RATE_6)) // 11A band
		MlmeRate = RATE_6;

	if ((pHeader_802_11->FC.Type == BTYPE_DATA) &&
		(pHeader_802_11->FC.SubType == SUBTYPE_QOS_NULL))
	{
		pMacEntry = MacTableLookup(pAd, pHeader_802_11->Addr1);
	}

#ifdef CONFIG_STA_SUPPORT
	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
	{
		// Fixed W52 with Activity scan issue in ABG_MIXED and ABGN_MIXED mode.
		if (pAd->CommonCfg.PhyMode == PHY_11ABG_MIXED
#ifdef DOT11_N_SUPPORT
			|| pAd->CommonCfg.PhyMode == PHY_11ABGN_MIXED
#endif // DOT11_N_SUPPORT //
		)
		{
			if (pAd->LatchRfRegs.Channel > 14)
				pAd->CommonCfg.MlmeTransmit.field.MODE = 1;
			else
				pAd->CommonCfg.MlmeTransmit.field.MODE = 0;
		}
	}
#endif // CONFIG_STA_SUPPORT //

	//
	// Should not be hard code to set PwrMgmt to 0 (PWR_ACTIVE)
	// Snice it's been set to 0 while on MgtMacHeaderInit
	// By the way this will cause frame to be send on PWR_SAVE failed.
	//
	// pHeader_802_11->FC.PwrMgmt = 0; // (pAd->StaCfg.Psm == PWR_SAVE);
	//
	// In WMM-UAPSD, mlme frame should be set psm as power saving but probe request frame
#ifdef CONFIG_STA_SUPPORT
    // Data-Null packets alse pass through MMRequest in RT2860, however, we hope control the psm bit to pass APSD
	if ((pHeader_802_11->FC.Type != BTYPE_DATA) && (pHeader_802_11->FC.Type != BTYPE_CNTL))
	{
		if ((pAd->StaCfg.Psm == PWR_SAVE) &&
			(pHeader_802_11->FC.SubType == SUBTYPE_ACTION))
			pHeader_802_11->FC.PwrMgmt = PWR_SAVE;
		else
			pHeader_802_11->FC.PwrMgmt = PWR_ACTIVE;
	}
#endif // CONFIG_STA_SUPPORT //

	bInsertTimestamp = FALSE;
	if (pHeader_802_11->FC.Type == BTYPE_CNTL) // must be PS-POLL
	{
#ifdef CONFIG_STA_SUPPORT
		//Set PM bit in ps-poll, to fix WLK 1.2  PowerSaveMode_ext failure issue.
		if ((pAd->OpMode == OPMODE_STA) && (pHeader_802_11->FC.SubType == SUBTYPE_PS_POLL))
		{
			pHeader_802_11->FC.PwrMgmt = PWR_SAVE;
		}
#endif // CONFIG_STA_SUPPORT //
		bAckRequired = FALSE;
	}
	else // BTYPE_MGMT or BTYPE_DATA(must be NULL frame)
	{
		//pAd->Sequence++;
		//pHeader_802_11->Sequence = pAd->Sequence;

		if (pHeader_802_11->Addr1[0] & 0x01) // MULTICAST, BROADCAST
		{
			bAckRequired = FALSE;
			pHeader_802_11->Duration = 0;
		}
		else
		{
			bAckRequired = TRUE;
			pHeader_802_11->Duration = RTMPCalcDuration(pAd, MlmeRate, 14);
			if (pHeader_802_11->FC.SubType == SUBTYPE_PROBE_RSP)
			{
				bInsertTimestamp = TRUE;
			}
		}
	}

	pHeader_802_11->Sequence = pAd->Sequence++;
	if (pAd->Sequence >0xfff)
		pAd->Sequence = 0;

	// Before radar detection done, mgmt frame can not be sent but probe req
	// Because we need to use probe req to trigger driver to send probe req in passive scan
	if ((pHeader_802_11->FC.SubType != SUBTYPE_PROBE_REQ)
		&& (pAd->CommonCfg.bIEEE80211H == 1)
		&& (pAd->CommonCfg.RadarDetect.RDMode != RD_NORMAL_MODE))
	{
		DBGPRINT(RT_DEBUG_ERROR,("MlmeHardTransmit --> radar detect not in normal mode !!!\n"));
//		if (!IrqState)
			RTMP_SEM_UNLOCK(&pAd->MgmtRingLock);
		return (NDIS_STATUS_FAILURE);
	}

#ifdef RT_BIG_ENDIAN
	RTMPFrameEndianChange(pAd, (PUCHAR)pHeader_802_11, DIR_WRITE, FALSE);
#endif

	//
	// fill scatter-and-gather buffer list into TXD. Internally created NDIS PACKET
	// should always has only one ohysical buffer, and the whole frame size equals
	// to the first scatter buffer size
	//

	// Initialize TX Descriptor
	// For inter-frame gap, the number is for this frame and next frame
	// For MLME rate, we will fix as 2Mb to match other vendor's implement
//	pAd->CommonCfg.MlmeTransmit.field.MODE = 1;

// management frame doesn't need encryption. so use RESERVED_WCID no matter u are sending to specific wcid or not.
	if (pMacEntry == NULL)
	{
		RTMPWriteTxWI(pAd, pFirstTxWI, FALSE, FALSE, bInsertTimestamp, FALSE, bAckRequired, FALSE,
		0, RESERVED_WCID, (SrcBufLen - TXINFO_SIZE - TXWI_SIZE), PID_MGMT, 0,  (UCHAR)pAd->CommonCfg.MlmeTransmit.field.MCS, IFS_BACKOFF, FALSE, &pAd->CommonCfg.MlmeTransmit);
	}
	else
	{
		RTMPWriteTxWI(pAd, pFirstTxWI, FALSE, FALSE,
					bInsertTimestamp, FALSE, bAckRequired, FALSE,
					0, pMacEntry->Aid, (SrcBufLen - TXINFO_SIZE - TXWI_SIZE),
					pMacEntry->MaxHTPhyMode.field.MCS, 0,
					(UCHAR)pMacEntry->MaxHTPhyMode.field.MCS,
					IFS_BACKOFF, FALSE, &pMacEntry->MaxHTPhyMode);
	}

#ifdef RT_BIG_ENDIAN
	RTMPWIEndianChange((PUCHAR)pFirstTxWI, TYPE_TXWI);
#endif

	// Now do hardware-depened kick out.
	HAL_KickOutMgmtTx(pAd, QueIdx, pPacket, pSrcBufVA, SrcBufLen);

	// Make sure to release MGMT ring resource
//	if (!IrqState)
		RTMP_SEM_UNLOCK(&pAd->MgmtRingLock);
	return NDIS_STATUS_SUCCESS;
}


/********************************************************************************

	New DeQueue Procedures.

 ********************************************************************************/

#define DEQUEUE_LOCK(lock, bIntContext, IrqFlags) 				\
			do{													\
				if (bIntContext == FALSE)						\
				RTMP_IRQ_LOCK((lock), IrqFlags);		\
			}while(0)

#define DEQUEUE_UNLOCK(lock, bIntContext, IrqFlags)				\
			do{													\
				if (bIntContext == FALSE)						\
					RTMP_IRQ_UNLOCK((lock), IrqFlags);	\
			}while(0)


/*
	========================================================================
	Tx Path design algorithm:
		Basically, we divide the packets into four types, Broadcast/Multicast, 11N Rate(AMPDU, AMSDU, Normal), B/G Rate(ARALINK, Normal),
		Specific Packet Type. Following show the classification rule and policy for each kinds of packets.
				Classification Rule=>
					Multicast: (*addr1 & 0x01) == 0x01
					Specific : bDHCPFrame, bARPFrame, bEAPOLFrame, etc.
					11N Rate : If peer support HT
								(1).AMPDU  -- If TXBA is negotiated.
								(2).AMSDU  -- If AMSDU is capable for both peer and ourself.
											*). AMSDU can embedded in a AMPDU, but now we didn't support it.
								(3).Normal -- Other packets which send as 11n rate.

					B/G Rate : If peer is b/g only.
								(1).ARALINK-- If both of peer/us supprot Ralink proprietary Aggregation and the TxRate is large than RATE_6
								(2).Normal -- Other packets which send as b/g rate.
					Fragment:
								The packet must be unicast, NOT A-RALINK, NOT A-MSDU, NOT 11n, then can consider about fragment.

				Classified Packet Handle Rule=>
					Multicast:
								No ACK, 		//pTxBlk->bAckRequired = FALSE;
								No WMM, 		//pTxBlk->bWMM = FALSE;
								No piggyback,   //pTxBlk->bPiggyBack = FALSE;
								Force LowRate,  //pTxBlk->bForceLowRate = TRUE;
					Specific :	Basically, for specific packet, we should handle it specifically, but now all specific packets are use
									the same policy to handle it.
								Force LowRate,  //pTxBlk->bForceLowRate = TRUE;

					11N Rate :
								No piggyback,	//pTxBlk->bPiggyBack = FALSE;

								(1).AMSDU
									pTxBlk->bWMM = TRUE;
								(2).AMPDU
									pTxBlk->bWMM = TRUE;
								(3).Normal

					B/G Rate :
								(1).ARALINK

								(2).Normal
	========================================================================
*/
static UCHAR TxPktClassification(
	IN RTMP_ADAPTER *pAd,
	IN PNDIS_PACKET  pPacket)
{
	UCHAR			TxFrameType = TX_UNKOWN_FRAME;
	UCHAR			Wcid;
	MAC_TABLE_ENTRY	*pMacEntry = NULL;
#ifdef DOT11_N_SUPPORT
	BOOLEAN			bHTRate = FALSE;
#endif // DOT11_N_SUPPORT //

	Wcid = RTMP_GET_PACKET_WCID(pPacket);
	if (Wcid == MCAST_WCID)
	{	// Handle for RA is Broadcast/Multicast Address.
		return TX_MCAST_FRAME;
	}

	// Handle for unicast packets
	pMacEntry = &pAd->MacTab.Content[Wcid];
	if (RTMP_GET_PACKET_LOWRATE(pPacket))
	{	// It's a specific packet need to force low rate, i.e., bDHCPFrame, bEAPOLFrame, bWAIFrame
		TxFrameType = TX_LEGACY_FRAME;
	}
#ifdef DOT11_N_SUPPORT
	else if (IS_HT_RATE(pMacEntry))
	{	// it's a 11n capable packet

		// Depends on HTPhyMode to check if the peer support the HTRate transmission.
		// 	Currently didn't support A-MSDU embedded in A-MPDU
		bHTRate = TRUE;
		if (RTMP_GET_PACKET_MOREDATA(pPacket) || (pMacEntry->PsMode == PWR_SAVE))
			TxFrameType = TX_LEGACY_FRAME;
#ifdef UAPSD_AP_SUPPORT
		else if (RTMP_GET_PACKET_EOSP(pPacket))
			TxFrameType = TX_LEGACY_FRAME;
#endif // UAPSD_AP_SUPPORT //
		else if((pMacEntry->TXBAbitmap & (1<<(RTMP_GET_PACKET_UP(pPacket)))) != 0)
			return TX_AMPDU_FRAME;
		else if(CLIENT_STATUS_TEST_FLAG(pMacEntry, fCLIENT_STATUS_AMSDU_INUSED))
			return TX_AMSDU_FRAME;
		else
			TxFrameType = TX_LEGACY_FRAME;
	}
#endif // DOT11_N_SUPPORT //
	else
	{	// it's a legacy b/g packet.
		if ((CLIENT_STATUS_TEST_FLAG(pMacEntry, fCLIENT_STATUS_AGGREGATION_CAPABLE) && pAd->CommonCfg.bAggregationCapable) &&
			(RTMP_GET_PACKET_TXRATE(pPacket) >= RATE_6) &&
			(!(OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED) && CLIENT_STATUS_TEST_FLAG(pMacEntry, fCLIENT_STATUS_WMM_CAPABLE))))
		{	// if peer support Ralink Aggregation, we use it.
			TxFrameType = TX_RALINK_FRAME;
		}
		else
		{
			TxFrameType = TX_LEGACY_FRAME;
		}
	}

	// Currently, our fragment only support when a unicast packet send as NOT-ARALINK, NOT-AMSDU and NOT-AMPDU.
	if ((RTMP_GET_PACKET_FRAGMENTS(pPacket) > 1) && (TxFrameType == TX_LEGACY_FRAME))
		TxFrameType = TX_FRAG_FRAME;

	return TxFrameType;
}


BOOLEAN RTMP_FillTxBlkInfo(
	IN RTMP_ADAPTER *pAd,
	IN TX_BLK *pTxBlk)
{
	PACKET_INFO			PacketInfo;
	PNDIS_PACKET		pPacket;
	PMAC_TABLE_ENTRY	pMacEntry = NULL;

	pPacket = pTxBlk->pPacket;
	RTMP_QueryPacketInfo(pPacket, &PacketInfo, &pTxBlk->pSrcBufHeader, &pTxBlk->SrcBufLen);

	pTxBlk->Wcid	 	 		= RTMP_GET_PACKET_WCID(pPacket);
	pTxBlk->apidx		 		= RTMP_GET_PACKET_IF(pPacket);
	pTxBlk->UserPriority 		= RTMP_GET_PACKET_UP(pPacket);
	pTxBlk->FrameGap = IFS_HTTXOP;		// ASIC determine Frame Gap

	if (RTMP_GET_PACKET_CLEAR_EAP_FRAME(pTxBlk->pPacket))
		TX_BLK_SET_FLAG(pTxBlk, fTX_bClearEAPFrame);
	else
		TX_BLK_CLEAR_FLAG(pTxBlk, fTX_bClearEAPFrame);

	// Default to clear this flag
	TX_BLK_CLEAR_FLAG(pTxBlk, fTX_bForceNonQoS);


	if (pTxBlk->Wcid == MCAST_WCID)
	{
		pTxBlk->pMacEntry = NULL;
		{
#ifdef MCAST_RATE_SPECIFIC
			PUCHAR pDA = GET_OS_PKT_DATAPTR(pPacket);
			if (((*pDA & 0x01) == 0x01) && (*pDA != 0xff))
				pTxBlk->pTransmit = &pAd->CommonCfg.MCastPhyMode;
			else
#endif // MCAST_RATE_SPECIFIC //
				pTxBlk->pTransmit = &pAd->MacTab.Content[MCAST_WCID].HTPhyMode;
		}

		TX_BLK_CLEAR_FLAG(pTxBlk, fTX_bAckRequired);	// AckRequired = FALSE, when broadcast packet in Adhoc mode.
		//TX_BLK_SET_FLAG(pTxBlk, fTX_bForceLowRate);
		TX_BLK_CLEAR_FLAG(pTxBlk, fTX_bAllowFrag);
		TX_BLK_CLEAR_FLAG(pTxBlk, fTX_bWMM);
		if (RTMP_GET_PACKET_MOREDATA(pPacket))
		{
			TX_BLK_SET_FLAG(pTxBlk, fTX_bMoreData);
		}

	}
	else
	{
		pTxBlk->pMacEntry = &pAd->MacTab.Content[pTxBlk->Wcid];
		pTxBlk->pTransmit = &pTxBlk->pMacEntry->HTPhyMode;

		pMacEntry = pTxBlk->pMacEntry;


		// For all unicast packets, need Ack unless the Ack Policy is not set as NORMAL_ACK.
		if (pAd->CommonCfg.AckPolicy[pTxBlk->QueIdx] != NORMAL_ACK)
			TX_BLK_CLEAR_FLAG(pTxBlk, fTX_bAckRequired);
		else
			TX_BLK_SET_FLAG(pTxBlk, fTX_bAckRequired);

		{

#ifdef CONFIG_STA_SUPPORT
			IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
			{

				// If support WMM, enable it.
				if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED) &&
					CLIENT_STATUS_TEST_FLAG(pMacEntry, fCLIENT_STATUS_WMM_CAPABLE))
					TX_BLK_SET_FLAG(pTxBlk, fTX_bWMM);

//				if (pAd->StaCfg.bAutoTxRateSwitch)
//					TX_BLK_SET_FLAG(pTxBlk, fTX_AutoRateSwitch);
			}
#endif // CONFIG_STA_SUPPORT //
		}

		if (pTxBlk->TxFrameType == TX_LEGACY_FRAME)
		{
			if ( (RTMP_GET_PACKET_LOWRATE(pPacket)) ||
                ((pAd->OpMode == OPMODE_AP) && (pMacEntry->MaxHTPhyMode.field.MODE == MODE_CCK) && (pMacEntry->MaxHTPhyMode.field.MCS == RATE_1)))
			{	// Specific packet, i.e., bDHCPFrame, bEAPOLFrame, bWAIFrame, need force low rate.
				pTxBlk->pTransmit = &pAd->MacTab.Content[MCAST_WCID].HTPhyMode;
#ifdef DOT11_N_SUPPORT
				// Modify the WMM bit for ICV issue. If we have a packet with EOSP field need to set as 1, how to handle it???
				if (IS_HT_STA(pTxBlk->pMacEntry) &&
					(CLIENT_STATUS_TEST_FLAG(pMacEntry, fCLIENT_STATUS_RALINK_CHIPSET)) &&
					((pAd->CommonCfg.bRdg == TRUE) && CLIENT_STATUS_TEST_FLAG(pMacEntry, fCLIENT_STATUS_RDG_CAPABLE)))
				{
					TX_BLK_CLEAR_FLAG(pTxBlk, fTX_bWMM);
					TX_BLK_SET_FLAG(pTxBlk, fTX_bForceNonQoS);
				}
#endif // DOT11_N_SUPPORT //
			}

#ifdef DOT11_N_SUPPORT
			if ( (IS_HT_RATE(pMacEntry) == FALSE) &&
				(CLIENT_STATUS_TEST_FLAG(pMacEntry, fCLIENT_STATUS_PIGGYBACK_CAPABLE)))
			{	// Currently piggy-back only support when peer is operate in b/g mode.
				TX_BLK_SET_FLAG(pTxBlk, fTX_bPiggyBack);
			}
#endif // DOT11_N_SUPPORT //

			if (RTMP_GET_PACKET_MOREDATA(pPacket))
			{
				TX_BLK_SET_FLAG(pTxBlk, fTX_bMoreData);
			}
#ifdef UAPSD_AP_SUPPORT
			if (RTMP_GET_PACKET_EOSP(pPacket))
			{
				TX_BLK_SET_FLAG(pTxBlk, fTX_bWMM_UAPSD_EOSP);
			}
#endif // UAPSD_AP_SUPPORT //
		}
		else if (pTxBlk->TxFrameType == TX_FRAG_FRAME)
		{
			TX_BLK_SET_FLAG(pTxBlk, fTX_bAllowFrag);
		}

		pMacEntry->DebugTxCount++;
	}

	return TRUE;

FillTxBlkErr:
	return FALSE;
}


BOOLEAN CanDoAggregateTransmit(
	IN RTMP_ADAPTER *pAd,
	IN NDIS_PACKET *pPacket,
	IN TX_BLK		*pTxBlk)
{

	//printk("Check if can do aggregation! TxFrameType=%d!\n", pTxBlk->TxFrameType);

	if (RTMP_GET_PACKET_WCID(pPacket) == MCAST_WCID)
		return FALSE;

	if (RTMP_GET_PACKET_DHCP(pPacket) ||
		RTMP_GET_PACKET_EAPOL(pPacket) ||
		RTMP_GET_PACKET_WAI(pPacket))
		return FALSE;

	if ((pTxBlk->TxFrameType == TX_AMSDU_FRAME) &&
		((pTxBlk->TotalFrameLen + GET_OS_PKT_LEN(pPacket))> (RX_BUFFER_AGGRESIZE - 100)))
	{	// For AMSDU, allow the packets with total length < max-amsdu size
		return FALSE;
	}

	if ((pTxBlk->TxFrameType == TX_RALINK_FRAME) &&
		(pTxBlk->TxPacketList.Number == 2))
	{	// For RALINK-Aggregation, allow two frames in one batch.
		return FALSE;
	}

#ifdef CONFIG_STA_SUPPORT
	if ((INFRA_ON(pAd)) && (pAd->OpMode == OPMODE_STA)) // must be unicast to AP
		return TRUE;
	else
#endif // CONFIG_STA_SUPPORT //
		return FALSE;

}


/*
	========================================================================

	Routine Description:
		To do the enqueue operation and extract the first item of waiting
		list. If a number of available shared memory segments could meet
		the request of extracted item, the extracted item will be fragmented
		into shared memory segments.

	Arguments:
		pAd Pointer to our adapter
		pQueue		Pointer to Waiting Queue

	Return Value:
		None

	IRQL = DISPATCH_LEVEL

	Note:

	========================================================================
*/
VOID RTMPDeQueuePacket(
	IN  PRTMP_ADAPTER   pAd,
	IN  BOOLEAN         bIntContext,
	IN  UCHAR			QIdx, /* BulkOutPipeId */
	IN  UCHAR           Max_Tx_Packets)
{
	PQUEUE_ENTRY    pEntry = NULL;
	PNDIS_PACKET 	pPacket;
	NDIS_STATUS     Status = NDIS_STATUS_SUCCESS;
	UCHAR           Count=0;
	PQUEUE_HEADER   pQueue;
	ULONG           FreeNumber[NUM_OF_TX_RING];
	UCHAR			QueIdx, sQIdx, eQIdx;
	unsigned long	IrqFlags = 0;
	BOOLEAN			hasTxDesc = FALSE;
	TX_BLK			TxBlk;
	TX_BLK			*pTxBlk;

#ifdef DBG_DIAGNOSE
	BOOLEAN			firstRound;
	RtmpDiagStruct	*pDiagStruct = &pAd->DiagStruct;
#endif


	if (QIdx == NUM_OF_TX_RING)
	{
		sQIdx = 0;
//PS packets use HCCA queue when dequeue from PS unicast queue (WiFi WPA2 MA9_DT1 for Marvell B STA)
#ifdef CONFIG_STA_SUPPORT
		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
		eQIdx = 3;	// 4 ACs, start from 0.
#endif // CONFIG_STA_SUPPORT //
	}
	else
	{
		sQIdx = eQIdx = QIdx;
	}

	for (QueIdx=sQIdx; QueIdx <= eQIdx; QueIdx++)
	{
		Count=0;

		RT28XX_START_DEQUEUE(pAd, QueIdx, IrqFlags);

#ifdef DBG_DIAGNOSE
		firstRound = ((QueIdx == 0) ? TRUE : FALSE);
#endif // DBG_DIAGNOSE //

		while (1)
		{
			if ((RTMP_TEST_FLAG(pAd, (fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS |
										fRTMP_ADAPTER_RADIO_OFF |
										fRTMP_ADAPTER_RESET_IN_PROGRESS |
										fRTMP_ADAPTER_HALT_IN_PROGRESS |
										fRTMP_ADAPTER_NIC_NOT_EXIST))))
			{
				RT28XX_STOP_DEQUEUE(pAd, QueIdx, IrqFlags);
				return;
			}

			if (Count >= Max_Tx_Packets)
				break;

			DEQUEUE_LOCK(&pAd->irq_lock, bIntContext, IrqFlags);
			if (&pAd->TxSwQueue[QueIdx] == NULL)
			{
#ifdef DBG_DIAGNOSE
				if (firstRound == TRUE)
					pDiagStruct->TxSWQueCnt[pDiagStruct->ArrayCurIdx][0]++;
#endif // DBG_DIAGNOSE //
				DEQUEUE_UNLOCK(&pAd->irq_lock, bIntContext, IrqFlags);
				break;
			}


			// probe the Queue Head
			pQueue = &pAd->TxSwQueue[QueIdx];
			if ((pEntry = pQueue->Head) == NULL)
			{
				DEQUEUE_UNLOCK(&pAd->irq_lock, bIntContext, IrqFlags);
				break;
			}

			pTxBlk = &TxBlk;
			NdisZeroMemory((PUCHAR)pTxBlk, sizeof(TX_BLK));
			//InitializeQueueHeader(&pTxBlk->TxPacketList);		// Didn't need it because we already memzero it.
			pTxBlk->QueIdx = QueIdx;

			pPacket = QUEUE_ENTRY_TO_PKT(pEntry);

			// Early check to make sure we have enoguh Tx Resource.
			hasTxDesc = RT28XX_HAS_ENOUGH_FREE_DESC(pAd, pTxBlk, FreeNumber[QueIdx], pPacket);
			if (!hasTxDesc)
			{
				pAd->PrivateInfo.TxRingFullCnt++;

				DEQUEUE_UNLOCK(&pAd->irq_lock, bIntContext, IrqFlags);

				break;
			}

			pTxBlk->TxFrameType = TxPktClassification(pAd, pPacket);
			pEntry = RemoveHeadQueue(pQueue);
			pTxBlk->TotalFrameNum++;
			pTxBlk->TotalFragNum += RTMP_GET_PACKET_FRAGMENTS(pPacket);	// The real fragment number maybe vary
			pTxBlk->TotalFrameLen += GET_OS_PKT_LEN(pPacket);
			pTxBlk->pPacket = pPacket;
			InsertTailQueue(&pTxBlk->TxPacketList, PACKET_TO_QUEUE_ENTRY(pPacket));

			if (pTxBlk->TxFrameType == TX_RALINK_FRAME || pTxBlk->TxFrameType == TX_AMSDU_FRAME)
			{
				// Enhance SW Aggregation Mechanism
				if (NEED_QUEUE_BACK_FOR_AGG(pAd, QueIdx, FreeNumber[QueIdx], pTxBlk->TxFrameType))
				{
					InsertHeadQueue(pQueue, PACKET_TO_QUEUE_ENTRY(pPacket));
					DEQUEUE_UNLOCK(&pAd->irq_lock, bIntContext, IrqFlags);
					break;
				}

				do{
					if((pEntry = pQueue->Head) == NULL)
						break;

					// For TX_AMSDU_FRAME/TX_RALINK_FRAME, Need to check if next pakcet can do aggregation.
					pPacket = QUEUE_ENTRY_TO_PKT(pEntry);
					FreeNumber[QueIdx] = GET_TXRING_FREENO(pAd, QueIdx);
					hasTxDesc = RT28XX_HAS_ENOUGH_FREE_DESC(pAd, pTxBlk, FreeNumber[QueIdx], pPacket);
					if ((hasTxDesc == FALSE) || (CanDoAggregateTransmit(pAd, pPacket, pTxBlk) == FALSE))
						break;

					//Remove the packet from the TxSwQueue and insert into pTxBlk
					pEntry = RemoveHeadQueue(pQueue);
					ASSERT(pEntry);
					pPacket = QUEUE_ENTRY_TO_PKT(pEntry);
					pTxBlk->TotalFrameNum++;
					pTxBlk->TotalFragNum += RTMP_GET_PACKET_FRAGMENTS(pPacket);	// The real fragment number maybe vary
					pTxBlk->TotalFrameLen += GET_OS_PKT_LEN(pPacket);
					InsertTailQueue(&pTxBlk->TxPacketList, PACKET_TO_QUEUE_ENTRY(pPacket));
				}while(1);

				if (pTxBlk->TxPacketList.Number == 1)
					pTxBlk->TxFrameType = TX_LEGACY_FRAME;
			}

#ifdef RT2870
			DEQUEUE_UNLOCK(&pAd->irq_lock, bIntContext, IrqFlags);
#endif // RT2870 //

			Count += pTxBlk->TxPacketList.Number;

				// Do HardTransmit now.
#ifdef CONFIG_STA_SUPPORT
			IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
				Status = STAHardTransmit(pAd, pTxBlk, QueIdx);
#endif // CONFIG_STA_SUPPORT //
		}

		RT28XX_STOP_DEQUEUE(pAd, QueIdx, IrqFlags);

#ifdef RT2870
		if (!hasTxDesc)
			RTUSBKickBulkOut(pAd);
#endif // RT2870 //

#ifdef BLOCK_NET_IF
		if ((pAd->blockQueueTab[QueIdx].SwTxQueueBlockFlag == TRUE)
			&& (pAd->TxSwQueue[QueIdx].Number < 1))
		{
			releaseNetIf(&pAd->blockQueueTab[QueIdx]);
		}
#endif // BLOCK_NET_IF //

	}

}


/*
	========================================================================

	Routine Description:
		Calculates the duration which is required to transmit out frames
	with given size and specified rate.

	Arguments:
		pAd 	Pointer to our adapter
		Rate			Transmit rate
		Size			Frame size in units of byte

	Return Value:
		Duration number in units of usec

	IRQL = PASSIVE_LEVEL
	IRQL = DISPATCH_LEVEL

	Note:

	========================================================================
*/
USHORT	RTMPCalcDuration(
	IN	PRTMP_ADAPTER	pAd,
	IN	UCHAR			Rate,
	IN	ULONG			Size)
{
	ULONG	Duration = 0;

	if (Rate < RATE_FIRST_OFDM_RATE) // CCK
	{
		if ((Rate > RATE_1) && OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_SHORT_PREAMBLE_INUSED))
			Duration = 96;	// 72+24 preamble+plcp
		else
			Duration = 192; // 144+48 preamble+plcp

		Duration += (USHORT)((Size << 4) / RateIdTo500Kbps[Rate]);
		if ((Size << 4) % RateIdTo500Kbps[Rate])
			Duration ++;
	}
	else if (Rate <= RATE_LAST_OFDM_RATE)// OFDM rates
	{
		Duration = 20 + 6;		// 16+4 preamble+plcp + Signal Extension
		Duration += 4 * (USHORT)((11 + Size * 4) / RateIdTo500Kbps[Rate]);
		if ((11 + Size * 4) % RateIdTo500Kbps[Rate])
			Duration += 4;
	}
	else	//mimo rate
	{
		Duration = 20 + 6;		// 16+4 preamble+plcp + Signal Extension
	}

	return (USHORT)Duration;
}


/*
	========================================================================

	Routine Description:
		Calculates the duration which is required to transmit out frames
	with given size and specified rate.

	Arguments:
		pTxWI		Pointer to head of each MPDU to HW.
		Ack 		Setting for Ack requirement bit
		Fragment	Setting for Fragment bit
		RetryMode	Setting for retry mode
		Ifs 		Setting for IFS gap
		Rate		Setting for transmit rate
		Service 	Setting for service
		Length		Frame length
		TxPreamble	Short or Long preamble when using CCK rates
		QueIdx - 0-3, according to 802.11e/d4.4 June/2003

	Return Value:
		None

	IRQL = PASSIVE_LEVEL
	IRQL = DISPATCH_LEVEL

    See also : BASmartHardTransmit()    !!!

	========================================================================
*/
VOID RTMPWriteTxWI(
	IN	PRTMP_ADAPTER	pAd,
	IN	PTXWI_STRUC 	pOutTxWI,
	IN	BOOLEAN			FRAG,
	IN	BOOLEAN			CFACK,
	IN	BOOLEAN			InsTimestamp,
	IN	BOOLEAN 		AMPDU,
	IN	BOOLEAN 		Ack,
	IN	BOOLEAN 		NSeq,		// HW new a sequence.
	IN	UCHAR			BASize,
	IN	UCHAR			WCID,
	IN	ULONG			Length,
	IN	UCHAR 			PID,
	IN	UCHAR			TID,
	IN	UCHAR			TxRate,
	IN	UCHAR			Txopmode,
	IN	BOOLEAN			CfAck,
	IN	HTTRANSMIT_SETTING	*pTransmit)
{
	PMAC_TABLE_ENTRY	pMac = NULL;
	TXWI_STRUC 		TxWI;
	PTXWI_STRUC 	pTxWI;

	if (WCID < MAX_LEN_OF_MAC_TABLE)
		pMac = &pAd->MacTab.Content[WCID];

	//
	// Always use Long preamble before verifiation short preamble functionality works well.
	// Todo: remove the following line if short preamble functionality works
	//
	OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_SHORT_PREAMBLE_INUSED);
	NdisZeroMemory(&TxWI, TXWI_SIZE);
	pTxWI = &TxWI;

	pTxWI->FRAG= FRAG;

	pTxWI->CFACK = CFACK;
	pTxWI->TS= InsTimestamp;
	pTxWI->AMPDU = AMPDU;
	pTxWI->ACK = Ack;
	pTxWI->txop= Txopmode;

	pTxWI->NSEQ = NSeq;
	// John tune the performace with Intel Client in 20 MHz performance
#ifdef DOT11_N_SUPPORT
	BASize = pAd->CommonCfg.TxBASize;

	if( BASize >7 )
		BASize =7;
	pTxWI->BAWinSize = BASize;
	pTxWI->ShortGI = pTransmit->field.ShortGI;
	pTxWI->STBC = pTransmit->field.STBC;
#endif // DOT11_N_SUPPORT //

	pTxWI->WirelessCliID = WCID;
	pTxWI->MPDUtotalByteCount = Length;
	pTxWI->PacketId = PID;

	// If CCK or OFDM, BW must be 20
	pTxWI->BW = (pTransmit->field.MODE <= MODE_OFDM) ? (BW_20) : (pTransmit->field.BW);
#ifdef DOT11N_DRAFT3
	if (pTxWI->BW)
		pTxWI->BW = (pAd->CommonCfg.AddHTInfo.AddHtInfo.RecomWidth == 0) ? (BW_20) : (pTransmit->field.BW);
#endif // DOT11N_DRAFT3 //

	pTxWI->MCS = pTransmit->field.MCS;
	pTxWI->PHYMODE = pTransmit->field.MODE;
	pTxWI->CFACK = CfAck;

#ifdef DOT11_N_SUPPORT
	if (pMac)
	{
		if (pAd->CommonCfg.bMIMOPSEnable)
		{
			if ((pMac->MmpsMode == MMPS_DYNAMIC) && (pTransmit->field.MCS > 7))
			{
				// Dynamic MIMO Power Save Mode
				pTxWI->MIMOps = 1;
			}
			else if (pMac->MmpsMode == MMPS_STATIC)
			{
				// Static MIMO Power Save Mode
				if (pTransmit->field.MODE >= MODE_HTMIX && pTransmit->field.MCS > 7)
				{
					pTxWI->MCS = 7;
					pTxWI->MIMOps = 0;
				}
			}
		}
		//pTxWI->MIMOps = (pMac->PsMode == PWR_MMPS)? 1:0;
		if (pMac->bIAmBadAtheros && (pMac->WepStatus != Ndis802_11WEPDisabled))
		{
			pTxWI->MpduDensity = 7;
		}
		else
		{
			pTxWI->MpduDensity = pMac->MpduDensity;
		}
	}
#endif // DOT11_N_SUPPORT //

	pTxWI->PacketId = pTxWI->MCS;
	NdisMoveMemory(pOutTxWI, &TxWI, sizeof(TXWI_STRUC));
}


VOID RTMPWriteTxWI_Data(
	IN	PRTMP_ADAPTER		pAd,
	IN	OUT PTXWI_STRUC		pTxWI,
	IN	TX_BLK				*pTxBlk)
{
	HTTRANSMIT_SETTING	*pTransmit;
	PMAC_TABLE_ENTRY	pMacEntry;
#ifdef DOT11_N_SUPPORT
	UCHAR				BASize;
#endif // DOT11_N_SUPPORT //


	ASSERT(pTxWI);

	pTransmit = pTxBlk->pTransmit;
	pMacEntry = pTxBlk->pMacEntry;


	//
	// Always use Long preamble before verifiation short preamble functionality works well.
	// Todo: remove the following line if short preamble functionality works
	//
	OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_SHORT_PREAMBLE_INUSED);
	NdisZeroMemory(pTxWI, TXWI_SIZE);

	pTxWI->FRAG		= TX_BLK_TEST_FLAG(pTxBlk, fTX_bAllowFrag);
	pTxWI->ACK		= TX_BLK_TEST_FLAG(pTxBlk, fTX_bAckRequired);
	pTxWI->txop		= pTxBlk->FrameGap;

#ifdef CONFIG_STA_SUPPORT
#ifdef QOS_DLS_SUPPORT
	if (pMacEntry &&
		(pAd->StaCfg.BssType == BSS_INFRA) &&
		(pMacEntry->ValidAsDls == TRUE))
		pTxWI->WirelessCliID = BSSID_WCID;
	else
#endif // QOS_DLS_SUPPORT //
#endif // CONFIG_STA_SUPPORT //
		pTxWI->WirelessCliID		= pTxBlk->Wcid;

	pTxWI->MPDUtotalByteCount	= pTxBlk->MpduHeaderLen + pTxBlk->SrcBufLen;
	pTxWI->CFACK				= TX_BLK_TEST_FLAG(pTxBlk, fTX_bPiggyBack);

	// If CCK or OFDM, BW must be 20
	pTxWI->BW = (pTransmit->field.MODE <= MODE_OFDM) ? (BW_20) : (pTransmit->field.BW);
#ifdef DOT11_N_SUPPORT
#ifdef DOT11N_DRAFT3
	if (pTxWI->BW)
		pTxWI->BW = (pAd->CommonCfg.AddHTInfo.AddHtInfo.RecomWidth == 0) ? (BW_20) : (pTransmit->field.BW);
#endif // DOT11N_DRAFT3 //
	pTxWI->AMPDU	= ((pTxBlk->TxFrameType == TX_AMPDU_FRAME) ? TRUE : FALSE);

	// John tune the performace with Intel Client in 20 MHz performance
	BASize = pAd->CommonCfg.TxBASize;
	if((pTxBlk->TxFrameType == TX_AMPDU_FRAME) && (pMacEntry))
	{
		UCHAR		RABAOriIdx = 0;	//The RA's BA Originator table index.

		RABAOriIdx = pTxBlk->pMacEntry->BAOriWcidArray[pTxBlk->UserPriority];
		BASize = pAd->BATable.BAOriEntry[RABAOriIdx].BAWinSize;
	}

	pTxWI->TxBF = pTransmit->field.TxBF;
	pTxWI->BAWinSize = BASize;
	pTxWI->ShortGI = pTransmit->field.ShortGI;
	pTxWI->STBC = pTransmit->field.STBC;
#endif // DOT11_N_SUPPORT //

	pTxWI->MCS = pTransmit->field.MCS;
	pTxWI->PHYMODE = pTransmit->field.MODE;

#ifdef DOT11_N_SUPPORT
	if (pMacEntry)
	{
		if ((pMacEntry->MmpsMode == MMPS_DYNAMIC) && (pTransmit->field.MCS > 7))
		{
			// Dynamic MIMO Power Save Mode
			pTxWI->MIMOps = 1;
		}
		else if (pMacEntry->MmpsMode == MMPS_STATIC)
		{
			// Static MIMO Power Save Mode
			if (pTransmit->field.MODE >= MODE_HTMIX && pTransmit->field.MCS > 7)
			{
				pTxWI->MCS = 7;
				pTxWI->MIMOps = 0;
			}
		}

		if (pMacEntry->bIAmBadAtheros && (pMacEntry->WepStatus != Ndis802_11WEPDisabled))
		{
			pTxWI->MpduDensity = 7;
		}
		else
		{
			pTxWI->MpduDensity = pMacEntry->MpduDensity;
		}
	}
#endif // DOT11_N_SUPPORT //

#ifdef DBG_DIAGNOSE
		if (pTxBlk->QueIdx== 0)
		{
			pAd->DiagStruct.TxDataCnt[pAd->DiagStruct.ArrayCurIdx]++;
			pAd->DiagStruct.TxMcsCnt[pAd->DiagStruct.ArrayCurIdx][pTxWI->MCS]++;
		}
#endif // DBG_DIAGNOSE //

	// for rate adapation
	pTxWI->PacketId = pTxWI->MCS;
#ifdef INF_AMAZON_SE
/*Iverson patch for WMM A5-T07 ,WirelessStaToWirelessSta do not bulk out aggregate */
	if( RTMP_GET_PACKET_NOBULKOUT(pTxBlk->pPacket))
	{
		if(pTxWI->PHYMODE == MODE_CCK)
		{
			pTxWI->PacketId = 6;
		}
	}
#endif // INF_AMAZON_SE //
}


VOID RTMPWriteTxWI_Cache(
	IN	PRTMP_ADAPTER		pAd,
	IN	OUT PTXWI_STRUC		pTxWI,
	IN	TX_BLK				*pTxBlk)
{
	PHTTRANSMIT_SETTING	/*pTxHTPhyMode,*/ pTransmit;
	PMAC_TABLE_ENTRY	pMacEntry;

	//
	// update TXWI
	//
	pMacEntry = pTxBlk->pMacEntry;
	pTransmit = pTxBlk->pTransmit;

	//if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED))
	//if (RTMPCheckEntryEnableAutoRateSwitch(pAd, pMacEntry))
	//if (TX_BLK_TEST_FLAG(pTxBlk, fTX_AutoRateSwitch))
	if (pMacEntry->bAutoTxRateSwitch)
	{
		pTxWI->txop = IFS_HTTXOP;

		// If CCK or OFDM, BW must be 20
		pTxWI->BW = (pTransmit->field.MODE <= MODE_OFDM) ? (BW_20) : (pTransmit->field.BW);
		pTxWI->ShortGI = pTransmit->field.ShortGI;
		pTxWI->STBC = pTransmit->field.STBC;

		pTxWI->MCS = pTransmit->field.MCS;
		pTxWI->PHYMODE = pTransmit->field.MODE;

		// set PID for TxRateSwitching
		pTxWI->PacketId = pTransmit->field.MCS;
	}

#ifdef DOT11_N_SUPPORT
	pTxWI->AMPDU = ((pMacEntry->NoBADataCountDown == 0) ? TRUE: FALSE);
	pTxWI->MIMOps = 0;

#ifdef DOT11N_DRAFT3
	if (pTxWI->BW)
		pTxWI->BW = (pAd->CommonCfg.AddHTInfo.AddHtInfo.RecomWidth == 0) ? (BW_20) : (pTransmit->field.BW);
#endif // DOT11N_DRAFT3 //

	if (pAd->CommonCfg.bMIMOPSEnable)
	{
		// MIMO Power Save Mode
		if ((pMacEntry->MmpsMode == MMPS_DYNAMIC) && (pTransmit->field.MCS > 7))
		{
			// Dynamic MIMO Power Save Mode
			pTxWI->MIMOps = 1;
		}
		else if (pMacEntry->MmpsMode == MMPS_STATIC)
		{
			// Static MIMO Power Save Mode
			if ((pTransmit->field.MODE >= MODE_HTMIX) && (pTransmit->field.MCS > 7))
			{
				pTxWI->MCS = 7;
				pTxWI->MIMOps = 0;
			}
		}
	}
#endif // DOT11_N_SUPPORT //

#ifdef DBG_DIAGNOSE
	if (pTxBlk->QueIdx== 0)
	{
		pAd->DiagStruct.TxDataCnt[pAd->DiagStruct.ArrayCurIdx]++;
		pAd->DiagStruct.TxMcsCnt[pAd->DiagStruct.ArrayCurIdx][pTxWI->MCS]++;
	}
#endif // DBG_DIAGNOSE //

	pTxWI->MPDUtotalByteCount = pTxBlk->MpduHeaderLen + pTxBlk->SrcBufLen;

}


/*
	========================================================================

	Routine Description:
		Calculates the duration which is required to transmit out frames
	with given size and specified rate.

	Arguments:
		pTxD		Pointer to transmit descriptor
		Ack 		Setting for Ack requirement bit
		Fragment	Setting for Fragment bit
		RetryMode	Setting for retry mode
		Ifs 		Setting for IFS gap
		Rate		Setting for transmit rate
		Service 	Setting for service
		Length		Frame length
		TxPreamble	Short or Long preamble when using CCK rates
		QueIdx - 0-3, according to 802.11e/d4.4 June/2003

	Return Value:
		None

	IRQL = PASSIVE_LEVEL
	IRQL = DISPATCH_LEVEL

	========================================================================
*/
VOID RTMPWriteTxDescriptor(
	IN	PRTMP_ADAPTER	pAd,
	IN	PTXD_STRUC		pTxD,
	IN	BOOLEAN 		bWIV,
	IN	UCHAR			QueueSEL)
{
	//
	// Always use Long preamble before verifiation short preamble functionality works well.
	// Todo: remove the following line if short preamble functionality works
	//
	OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_SHORT_PREAMBLE_INUSED);

	pTxD->WIV	= (bWIV) ? 1: 0;
	pTxD->QSEL= (QueueSEL);
	if (pAd->bGenOneHCCA == TRUE)
		pTxD->QSEL= FIFO_HCCA;
	pTxD->DMADONE = 0;
}


// should be called only when -
// 1. MEADIA_CONNECTED
// 2. AGGREGATION_IN_USED
// 3. Fragmentation not in used
// 4. either no previous frame (pPrevAddr1=NULL) .OR. previoud frame is aggregatible
BOOLEAN TxFrameIsAggregatible(
	IN	PRTMP_ADAPTER	pAd,
	IN	PUCHAR			pPrevAddr1,
	IN	PUCHAR			p8023hdr)
{

	// can't aggregate EAPOL (802.1x) frame
	if ((p8023hdr[12] == 0x88) && (p8023hdr[13] == 0x8e))
		return FALSE;

	// can't aggregate multicast/broadcast frame
	if (p8023hdr[0] & 0x01)
		return FALSE;

	if (INFRA_ON(pAd)) // must be unicast to AP
		return TRUE;
	else if ((pPrevAddr1 == NULL) || MAC_ADDR_EQUAL(pPrevAddr1, p8023hdr)) // unicast to same STA
		return TRUE;
	else
		return FALSE;
}


/*
	========================================================================

	Routine Description:
	   Check the MSDU Aggregation policy
	1.HT aggregation is A-MSDU
	2.legaacy rate aggregation is software aggregation by Ralink.

	Arguments:

	Return Value:

	Note:

	========================================================================
*/
BOOLEAN PeerIsAggreOn(
	IN	PRTMP_ADAPTER	pAd,
	IN	ULONG		   TxRate,
	IN	PMAC_TABLE_ENTRY pMacEntry)
{
	ULONG	AFlags = (fCLIENT_STATUS_AMSDU_INUSED | fCLIENT_STATUS_AGGREGATION_CAPABLE);

	if (pMacEntry != NULL && CLIENT_STATUS_TEST_FLAG(pMacEntry, AFlags))
	{
#ifdef DOT11_N_SUPPORT
		if (pMacEntry->HTPhyMode.field.MODE >= MODE_HTMIX)
		{
			return TRUE;
		}
#endif // DOT11_N_SUPPORT //

#ifdef AGGREGATION_SUPPORT
		if (TxRate >= RATE_6 && pAd->CommonCfg.bAggregationCapable && (!(OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED) && CLIENT_STATUS_TEST_FLAG(pMacEntry, fCLIENT_STATUS_WMM_CAPABLE))))
		{	// legacy  Ralink Aggregation support
			return TRUE;
		}
#endif // AGGREGATION_SUPPORT //
	}

	return FALSE;

}


/*
	========================================================================

	Routine Description:
		Check and fine the packet waiting in SW queue with highest priority

	Arguments:
		pAd Pointer to our adapter

	Return Value:
		pQueue		Pointer to Waiting Queue

	IRQL = DISPATCH_LEVEL

	Note:

	========================================================================
*/
PQUEUE_HEADER	RTMPCheckTxSwQueue(
	IN	PRTMP_ADAPTER	pAd,
	OUT PUCHAR			pQueIdx)
{

	ULONG	Number;
	// 2004-11-15 to be removed. test aggregation only
//	if ((OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_AGGREGATION_INUSED)) && (*pNumber < 2))
//		 return NULL;

	Number = pAd->TxSwQueue[QID_AC_BK].Number
			 + pAd->TxSwQueue[QID_AC_BE].Number
			 + pAd->TxSwQueue[QID_AC_VI].Number
			 + pAd->TxSwQueue[QID_AC_VO].Number
			 + pAd->TxSwQueue[QID_HCCA].Number;

	if (pAd->TxSwQueue[QID_AC_VO].Head != NULL)
	{
		*pQueIdx = QID_AC_VO;
		return (&pAd->TxSwQueue[QID_AC_VO]);
	}
	else if (pAd->TxSwQueue[QID_AC_VI].Head != NULL)
	{
		*pQueIdx = QID_AC_VI;
		return (&pAd->TxSwQueue[QID_AC_VI]);
	}
	else if (pAd->TxSwQueue[QID_AC_BE].Head != NULL)
	{
		*pQueIdx = QID_AC_BE;
		return (&pAd->TxSwQueue[QID_AC_BE]);
	}
	else if (pAd->TxSwQueue[QID_AC_BK].Head != NULL)
	{
		*pQueIdx = QID_AC_BK;
		return (&pAd->TxSwQueue[QID_AC_BK]);
	}
	else if (pAd->TxSwQueue[QID_HCCA].Head != NULL)
	{
		*pQueIdx = QID_HCCA;
		return (&pAd->TxSwQueue[QID_HCCA]);
	}

	// No packet pending in Tx Sw queue
	*pQueIdx = QID_AC_BK;

	return (NULL);
}


/*
	========================================================================

	Routine Description:
		Suspend MSDU transmission

	Arguments:
		pAd 	Pointer to our adapter

	Return Value:
		None

	Note:

	========================================================================
*/
VOID	RTMPSuspendMsduTransmission(
	IN	PRTMP_ADAPTER	pAd)
{
	DBGPRINT(RT_DEBUG_TRACE,("SCANNING, suspend MSDU transmission ...\n"));


	//
	// Before BSS_SCAN_IN_PROGRESS, we need to keep Current R66 value and
	// use Lowbound as R66 value on ScanNextChannel(...)
	//
	RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R66, &pAd->BbpTuning.R66CurrentValue);

	// set BBP_R66 to 0x30/0x40 when scanning (AsicSwitchChannel will set R66 according to channel when scanning)
	//RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, (0x26 + GET_LNA_GAIN(pAd)));
	RTMPSetAGCInitValue(pAd, BW_20);

	RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS);
	//RTMP_IO_WRITE32(pAd, TX_CNTL_CSR, 0x000f0000);		// abort all TX rings
}


/*
	========================================================================

	Routine Description:
		Resume MSDU transmission

	Arguments:
		pAd 	Pointer to our adapter

	Return Value:
		None

	IRQL = DISPATCH_LEVEL

	Note:

	========================================================================
*/
VOID RTMPResumeMsduTransmission(
	IN	PRTMP_ADAPTER	pAd)
{
//    UCHAR			IrqState;

	DBGPRINT(RT_DEBUG_TRACE,("SCAN done, resume MSDU transmission ...\n"));


	// After finish BSS_SCAN_IN_PROGRESS, we need to restore Current R66 value
	// R66 should not be 0
	if (pAd->BbpTuning.R66CurrentValue == 0)
	{
		pAd->BbpTuning.R66CurrentValue = 0x38;
		DBGPRINT_ERR(("RTMPResumeMsduTransmission, R66CurrentValue=0...\n"));
	}
	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, pAd->BbpTuning.R66CurrentValue);

	RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS);
// sample, for IRQ LOCK to SEM LOCK
//    IrqState = pAd->irq_disabled;
//	if (IrqState)
//		RTMPDeQueuePacket(pAd, TRUE, NUM_OF_TX_RING, MAX_TX_PROCESS);
//    else
	RTMPDeQueuePacket(pAd, FALSE, NUM_OF_TX_RING, MAX_TX_PROCESS);
}


UINT deaggregate_AMSDU_announce(
	IN	PRTMP_ADAPTER	pAd,
	PNDIS_PACKET		pPacket,
	IN	PUCHAR			pData,
	IN	ULONG			DataSize)
{
	USHORT 			PayloadSize;
	USHORT 			SubFrameSize;
	PHEADER_802_3 	pAMSDUsubheader;
	UINT			nMSDU;
    UCHAR			Header802_3[14];

	PUCHAR			pPayload, pDA, pSA, pRemovedLLCSNAP;
	PNDIS_PACKET	pClonePacket;


	nMSDU = 0;

	while (DataSize > LENGTH_802_3)
	{

		nMSDU++;

		//hex_dump("subheader", pData, 64);
		pAMSDUsubheader = (PHEADER_802_3)pData;
		//pData += LENGTH_802_3;
		PayloadSize = pAMSDUsubheader->Octet[1] + (pAMSDUsubheader->Octet[0]<<8);
		SubFrameSize = PayloadSize + LENGTH_802_3;


		if ((DataSize < SubFrameSize) || (PayloadSize > 1518 ))
		{
			break;
		}

		//printk("%d subframe: Size = %d\n",  nMSDU, PayloadSize);

		pPayload = pData + LENGTH_802_3;
		pDA = pData;
		pSA = pData + MAC_ADDR_LEN;

		// convert to 802.3 header
        CONVERT_TO_802_3(Header802_3, pDA, pSA, pPayload, PayloadSize, pRemovedLLCSNAP);

#ifdef CONFIG_STA_SUPPORT
		if ((Header802_3[12] == 0x88) && (Header802_3[13] == 0x8E) )
		{
		    // avoid local heap overflow, use dyanamic allocation
		   MLME_QUEUE_ELEM *Elem = (MLME_QUEUE_ELEM *) kmalloc(sizeof(MLME_QUEUE_ELEM), MEM_ALLOC_FLAG);
		   memmove(Elem->Msg+(LENGTH_802_11 + LENGTH_802_1_H), pPayload, PayloadSize);
		   Elem->MsgLen = LENGTH_802_11 + LENGTH_802_1_H + PayloadSize;
		   WpaEAPOLKeyAction(pAd, Elem);
		   kfree(Elem);
		}
#endif // CONFIG_STA_SUPPORT //

#ifdef CONFIG_STA_SUPPORT
		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
		{
	        	if (pRemovedLLCSNAP)
	        	{
	    			pPayload -= LENGTH_802_3;
	    			PayloadSize += LENGTH_802_3;
	    			NdisMoveMemory(pPayload, &Header802_3[0], LENGTH_802_3);
	        	}
		}
#endif // CONFIG_STA_SUPPORT //

		pClonePacket = ClonePacket(pAd, pPacket, pPayload, PayloadSize);
		if (pClonePacket)
		{
#ifdef CONFIG_STA_SUPPORT
			IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
				ANNOUNCE_OR_FORWARD_802_3_PACKET(pAd, pClonePacket, RTMP_GET_PACKET_IF(pPacket));
#endif // CONFIG_STA_SUPPORT //
		}


		// A-MSDU has padding to multiple of 4 including subframe header.
		// align SubFrameSize up to multiple of 4
		SubFrameSize = (SubFrameSize+3)&(~0x3);


		if (SubFrameSize > 1528 || SubFrameSize < 32)
		{
			break;
		}

		if (DataSize > SubFrameSize)
		{
			pData += SubFrameSize;
			DataSize -= SubFrameSize;
		}
		else
		{
			// end of A-MSDU
			DataSize = 0;
		}
	}

	// finally release original rx packet
	RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_SUCCESS);

	return nMSDU;
}


UINT BA_Reorder_AMSDU_Annnounce(
	IN	PRTMP_ADAPTER	pAd,
	IN	PNDIS_PACKET	pPacket)
{
	PUCHAR			pData;
	USHORT			DataSize;
	UINT			nMSDU = 0;

	pData = (PUCHAR) GET_OS_PKT_DATAPTR(pPacket);
	DataSize = (USHORT) GET_OS_PKT_LEN(pPacket);

	nMSDU = deaggregate_AMSDU_announce(pAd, pPacket, pData, DataSize);

	return nMSDU;
}


/*
	==========================================================================
	Description:
		Look up the MAC address in the MAC table. Return NULL if not found.
	Return:
		pEntry - pointer to the MAC entry; NULL is not found
	==========================================================================
*/
MAC_TABLE_ENTRY *MacTableLookup(
	IN PRTMP_ADAPTER pAd,
	PUCHAR pAddr)
{
	ULONG HashIdx;
	MAC_TABLE_ENTRY *pEntry = NULL;

	HashIdx = MAC_ADDR_HASH_INDEX(pAddr);
	pEntry = pAd->MacTab.Hash[HashIdx];

	while (pEntry && (pEntry->ValidAsCLI || pEntry->ValidAsWDS || pEntry->ValidAsApCli || pEntry->ValidAsMesh))
	{
		if (MAC_ADDR_EQUAL(pEntry->Addr, pAddr))
		{
			break;
		}
		else
			pEntry = pEntry->pNext;
	}

	return pEntry;
}

MAC_TABLE_ENTRY *MacTableInsertEntry(
	IN  PRTMP_ADAPTER   pAd,
	IN  PUCHAR			pAddr,
	IN	UCHAR			apidx,
	IN BOOLEAN	CleanAll)
{
	UCHAR HashIdx;
	int i, FirstWcid;
	MAC_TABLE_ENTRY *pEntry = NULL, *pCurrEntry;
//	USHORT	offset;
//	ULONG	addr;

	// if FULL, return
	if (pAd->MacTab.Size >= MAX_LEN_OF_MAC_TABLE)
		return NULL;

	FirstWcid = 1;
#ifdef CONFIG_STA_SUPPORT
	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
	if (pAd->StaCfg.BssType == BSS_INFRA)
		FirstWcid = 2;
#endif // CONFIG_STA_SUPPORT //

	// allocate one MAC entry
	NdisAcquireSpinLock(&pAd->MacTabLock);
	for (i = FirstWcid; i< MAX_LEN_OF_MAC_TABLE; i++)   // skip entry#0 so that "entry index == AID" for fast lookup
	{
		// pick up the first available vacancy
		if ((pAd->MacTab.Content[i].ValidAsCLI == FALSE) &&
			(pAd->MacTab.Content[i].ValidAsWDS == FALSE) &&
			(pAd->MacTab.Content[i].ValidAsApCli== FALSE) &&
			(pAd->MacTab.Content[i].ValidAsMesh == FALSE)
#ifdef CONFIG_STA_SUPPORT
#ifdef QOS_DLS_SUPPORT
			&& (pAd->MacTab.Content[i].ValidAsDls == FALSE)
#endif // QOS_DLS_SUPPORT //
#endif // CONFIG_STA_SUPPORT //
			)
		{
			pEntry = &pAd->MacTab.Content[i];
			if (CleanAll == TRUE)
			{
				pEntry->MaxSupportedRate = RATE_11;
				pEntry->CurrTxRate = RATE_11;
				NdisZeroMemory(pEntry, sizeof(MAC_TABLE_ENTRY));
				pEntry->PairwiseKey.KeyLen = 0;
				pEntry->PairwiseKey.CipherAlg = CIPHER_NONE;
			}
#ifdef CONFIG_STA_SUPPORT
#ifdef QOS_DLS_SUPPORT
			if (apidx >= MIN_NET_DEVICE_FOR_DLS)
			{
				pEntry->ValidAsCLI = FALSE;
				pEntry->ValidAsWDS = FALSE;
				pEntry->ValidAsApCli = FALSE;
				pEntry->ValidAsMesh = FALSE;
				pEntry->ValidAsDls = TRUE;
				pEntry->isCached = FALSE;
			}
			else
#endif // QOS_DLS_SUPPORT //
#endif // CONFIG_STA_SUPPORT //
			{

#ifdef CONFIG_STA_SUPPORT
				IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
				{
					pEntry->ValidAsCLI = TRUE;
					pEntry->ValidAsWDS = FALSE;
					pEntry->ValidAsApCli = FALSE;
					pEntry->ValidAsMesh = FALSE;
					pEntry->ValidAsDls = FALSE;
				}
#endif // CONFIG_STA_SUPPORT //
			}

			pEntry->bIAmBadAtheros = FALSE;
			pEntry->pAd = pAd;
			pEntry->CMTimerRunning = FALSE;
			pEntry->EnqueueEapolStartTimerRunning = EAPOL_START_DISABLE;
			pEntry->RSNIE_Len = 0;
			NdisZeroMemory(pEntry->R_Counter, sizeof(pEntry->R_Counter));
			pEntry->ReTryCounter = PEER_MSG1_RETRY_TIMER_CTR;

			if (pEntry->ValidAsMesh)
				pEntry->apidx = (apidx - MIN_NET_DEVICE_FOR_MESH);
			else if (pEntry->ValidAsApCli)
				pEntry->apidx = (apidx - MIN_NET_DEVICE_FOR_APCLI);
			else if (pEntry->ValidAsWDS)
				pEntry->apidx = (apidx - MIN_NET_DEVICE_FOR_WDS);
#ifdef CONFIG_STA_SUPPORT
#ifdef QOS_DLS_SUPPORT
			else if (pEntry->ValidAsDls)
				pEntry->apidx = (apidx - MIN_NET_DEVICE_FOR_DLS);
#endif // QOS_DLS_SUPPORT //
#endif // CONFIG_STA_SUPPORT //
			else
				pEntry->apidx = apidx;

			{

#ifdef CONFIG_STA_SUPPORT
				IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
				{
					pEntry->AuthMode = pAd->StaCfg.AuthMode;
					pEntry->WepStatus = pAd->StaCfg.WepStatus;
					pEntry->PrivacyFilter = Ndis802_11PrivFilterAcceptAll;
				}
#endif // CONFIG_STA_SUPPORT //
			}

			pEntry->GTKState = REKEY_NEGOTIATING;
			pEntry->PairwiseKey.KeyLen = 0;
			pEntry->PairwiseKey.CipherAlg = CIPHER_NONE;
#ifdef CONFIG_STA_SUPPORT
#ifdef QOS_DLS_SUPPORT
			if (pEntry->ValidAsDls == TRUE)
				pEntry->PortSecured = WPA_802_1X_PORT_SECURED;
			else
#endif //QOS_DLS_SUPPORT
#endif // CONFIG_STA_SUPPORT //
			pEntry->PortSecured = WPA_802_1X_PORT_NOT_SECURED;
			pEntry->PMKID_CacheIdx = ENTRY_NOT_FOUND;
			COPY_MAC_ADDR(pEntry->Addr, pAddr);
			pEntry->Sst = SST_NOT_AUTH;
			pEntry->AuthState = AS_NOT_AUTH;
			pEntry->Aid = (USHORT)i;  //0;
			pEntry->CapabilityInfo = 0;
			pEntry->PsMode = PWR_ACTIVE;
			pEntry->PsQIdleCount = 0;
			pEntry->NoDataIdleCount = 0;
			pEntry->ContinueTxFailCnt = 0;
			InitializeQueueHeader(&pEntry->PsQueue);


			pAd->MacTab.Size ++;

			// Add this entry into ASIC RX WCID search table
			RT28XX_STA_ENTRY_ADD(pAd, pEntry);


			DBGPRINT(RT_DEBUG_TRACE, ("MacTableInsertEntry - allocate entry #%d, Total= %d\n",i, pAd->MacTab.Size));
			break;
		}
	}

	// add this MAC entry into HASH table
	if (pEntry)
	{
		HashIdx = MAC_ADDR_HASH_INDEX(pAddr);
		if (pAd->MacTab.Hash[HashIdx] == NULL)
		{
			pAd->MacTab.Hash[HashIdx] = pEntry;
		}
		else
		{
			pCurrEntry = pAd->MacTab.Hash[HashIdx];
			while (pCurrEntry->pNext != NULL)
				pCurrEntry = pCurrEntry->pNext;
			pCurrEntry->pNext = pEntry;
		}
	}

	NdisReleaseSpinLock(&pAd->MacTabLock);
	return pEntry;
}

/*
	==========================================================================
	Description:
		Delete a specified client from MAC table
	==========================================================================
 */
BOOLEAN MacTableDeleteEntry(
	IN PRTMP_ADAPTER pAd,
	IN USHORT wcid,
	IN PUCHAR pAddr)
{
	USHORT HashIdx;
	MAC_TABLE_ENTRY *pEntry, *pPrevEntry, *pProbeEntry;
	BOOLEAN Cancelled;
	//USHORT	offset;	// unused variable
	//UCHAR	j;			// unused variable

	if (wcid >= MAX_LEN_OF_MAC_TABLE)
		return FALSE;

	NdisAcquireSpinLock(&pAd->MacTabLock);

	HashIdx = MAC_ADDR_HASH_INDEX(pAddr);
	//pEntry = pAd->MacTab.Hash[HashIdx];
	pEntry = &pAd->MacTab.Content[wcid];

	if (pEntry && (pEntry->ValidAsCLI || pEntry->ValidAsApCli || pEntry->ValidAsWDS || pEntry->ValidAsMesh
#ifdef CONFIG_STA_SUPPORT
#ifdef QOS_DLS_SUPPORT
 		|| pEntry->ValidAsDls
#endif // QOS_DLS_SUPPORT //
#endif // CONFIG_STA_SUPPORT //
		))
	{
		if (MAC_ADDR_EQUAL(pEntry->Addr, pAddr))
		{

			// Delete this entry from ASIC on-chip WCID Table
			RT28XX_STA_ENTRY_MAC_RESET(pAd, wcid);

#ifdef DOT11_N_SUPPORT
			// free resources of BA
			BASessionTearDownALL(pAd, pEntry->Aid);
#endif // DOT11_N_SUPPORT //


			pPrevEntry = NULL;
			pProbeEntry = pAd->MacTab.Hash[HashIdx];
			ASSERT(pProbeEntry);

			// update Hash list
			do
			{
				if (pProbeEntry == pEntry)
				{
					if (pPrevEntry == NULL)
					{
						pAd->MacTab.Hash[HashIdx] = pEntry->pNext;
					}
					else
					{
						pPrevEntry->pNext = pEntry->pNext;
					}
					break;
				}

				pPrevEntry = pProbeEntry;
				pProbeEntry = pProbeEntry->pNext;
			} while (pProbeEntry);

			// not found !!!
			ASSERT(pProbeEntry != NULL);

			RT28XX_STA_ENTRY_KEY_DEL(pAd, BSS0, wcid);


		if (pEntry->EnqueueEapolStartTimerRunning != EAPOL_START_DISABLE)
		{
			RTMPCancelTimer(&pEntry->EnqueueStartForPSKTimer, &Cancelled);
			pEntry->EnqueueEapolStartTimerRunning = EAPOL_START_DISABLE;
		}


   			NdisZeroMemory(pEntry, sizeof(MAC_TABLE_ENTRY));
			pAd->MacTab.Size --;
			DBGPRINT(RT_DEBUG_TRACE, ("MacTableDeleteEntry1 - Total= %d\n", pAd->MacTab.Size));
		}
		else
		{
			printk("\n%s: Impossible Wcid = %d !!!!!\n", __FUNCTION__, wcid);
		}
	}

	NdisReleaseSpinLock(&pAd->MacTabLock);

	//Reset operating mode when no Sta.
	if (pAd->MacTab.Size == 0)
	{
#ifdef DOT11_N_SUPPORT
		pAd->CommonCfg.AddHTInfo.AddHtInfo2.OperaionMode = 0;
#endif // DOT11_N_SUPPORT //
		//AsicUpdateProtect(pAd, 0 /*pAd->CommonCfg.AddHTInfo.AddHtInfo2.OperaionMode*/, (ALLN_SETPROTECT), TRUE, 0 /*pAd->MacTab.fAnyStationNonGF*/);
		RT28XX_UPDATE_PROTECT(pAd);  // edit by johnli, fix "in_interrupt" error when call "MacTableDeleteEntry" in Rx tasklet
	}

	return TRUE;
}


/*
	==========================================================================
	Description:
		This routine reset the entire MAC table. All packets pending in
		the power-saving queues are freed here.
	==========================================================================
 */
VOID MacTableReset(
	IN  PRTMP_ADAPTER  pAd)
{
	int         i;

	DBGPRINT(RT_DEBUG_TRACE, ("MacTableReset\n"));
	//NdisAcquireSpinLock(&pAd->MacTabLock);

	for (i=1; i<MAX_LEN_OF_MAC_TABLE; i++)
	{
		if (pAd->MacTab.Content[i].ValidAsCLI == TRUE)
	   {

#ifdef DOT11_N_SUPPORT
			// free resources of BA
			BASessionTearDownALL(pAd, i);
#endif // DOT11_N_SUPPORT //

			pAd->MacTab.Content[i].ValidAsCLI = FALSE;


#ifdef RT2870
			NdisZeroMemory(pAd->MacTab.Content[i].Addr, 6);
			RT28XX_STA_ENTRY_MAC_RESET(pAd, i);
#endif // RT2870 //

			//AsicDelWcidTab(pAd, i);
		}
	}

	return;
}

/*
	==========================================================================
	Description:

	IRQL = DISPATCH_LEVEL

	==========================================================================
*/
VOID AssocParmFill(
	IN PRTMP_ADAPTER pAd,
	IN OUT MLME_ASSOC_REQ_STRUCT *AssocReq,
	IN PUCHAR                     pAddr,
	IN USHORT                     CapabilityInfo,
	IN ULONG                      Timeout,
	IN USHORT                     ListenIntv)
{
	COPY_MAC_ADDR(AssocReq->Addr, pAddr);
	// Add mask to support 802.11b mode only
	AssocReq->CapabilityInfo = CapabilityInfo & SUPPORTED_CAPABILITY_INFO; // not cf-pollable, not cf-poll-request
	AssocReq->Timeout = Timeout;
	AssocReq->ListenIntv = ListenIntv;
}


/*
	==========================================================================
	Description:

	IRQL = DISPATCH_LEVEL

	==========================================================================
*/
VOID DisassocParmFill(
	IN PRTMP_ADAPTER pAd,
	IN OUT MLME_DISASSOC_REQ_STRUCT *DisassocReq,
	IN PUCHAR pAddr,
	IN USHORT Reason)
{
	COPY_MAC_ADDR(DisassocReq->Addr, pAddr);
	DisassocReq->Reason = Reason;
}


/*
	========================================================================

	Routine Description:
		Check the out going frame, if this is an DHCP or ARP datagram
	will be duplicate another frame at low data rate transmit.

	Arguments:
		pAd 		Pointer to our adapter
		pPacket 	Pointer to outgoing Ndis frame

	Return Value:
		TRUE		To be duplicate at Low data rate transmit. (1mb)
		FALSE		Do nothing.

	IRQL = DISPATCH_LEVEL

	Note:

		MAC header + IP Header + UDP Header
		  14 Bytes	  20 Bytes

		UDP Header
		00|01|02|03|04|05|06|07|08|09|10|11|12|13|14|15|
						Source Port
		16|17|18|19|20|21|22|23|24|25|26|27|28|29|30|31|
					Destination Port

		port 0x43 means Bootstrap Protocol, server.
		Port 0x44 means Bootstrap Protocol, client.

	========================================================================
*/

BOOLEAN RTMPCheckDHCPFrame(
	IN	PRTMP_ADAPTER	pAd,
	IN	PNDIS_PACKET	pPacket)
{
	PACKET_INFO 	PacketInfo;
	ULONG			NumberOfBytesRead = 0;
	ULONG			CurrentOffset = 0;
	PVOID			pVirtualAddress = NULL;
	UINT			NdisBufferLength;
	PUCHAR			pSrc;
	USHORT			Protocol;
	UCHAR			ByteOffset36 = 0;
	UCHAR			ByteOffset38 = 0;
	BOOLEAN 		ReadFirstParm = TRUE;

	RTMP_QueryPacketInfo(pPacket, &PacketInfo, (PUCHAR *)&pVirtualAddress, &NdisBufferLength);

	NumberOfBytesRead += NdisBufferLength;
	pSrc = (PUCHAR) pVirtualAddress;
	Protocol = *(pSrc + 12) * 256 + *(pSrc + 13);

	//
	// Check DHCP & BOOTP protocol
	//
	while (NumberOfBytesRead <= PacketInfo.TotalPacketLength)
	{
		if ((NumberOfBytesRead >= 35) && (ReadFirstParm == TRUE))
		{
			CurrentOffset = 35 - (NumberOfBytesRead - NdisBufferLength);
			ByteOffset36 = *(pSrc + CurrentOffset);
			ReadFirstParm = FALSE;
		}

		if (NumberOfBytesRead >= 37)
		{
			CurrentOffset = 37 - (NumberOfBytesRead - NdisBufferLength);
			ByteOffset38 = *(pSrc + CurrentOffset);
			//End of Read
			break;
		}
		return FALSE;
	}

	// Check for DHCP & BOOTP protocol
	if ((ByteOffset36 != 0x44) || (ByteOffset38 != 0x43))
		{
		//
		// 2054 (hex 0806) for ARP datagrams
		// if this packet is not ARP datagrams, then do nothing
		// ARP datagrams will also be duplicate at 1mb broadcast frames
		//
		if (Protocol != 0x0806 )
			return FALSE;
		}

	return TRUE;
}


BOOLEAN RTMPCheckEtherType(
	IN	PRTMP_ADAPTER	pAd,
	IN	PNDIS_PACKET	pPacket)
{
	USHORT	TypeLen;
	UCHAR	Byte0, Byte1;
	PUCHAR	pSrcBuf;
	UINT32	pktLen;
	UINT16 	srcPort, dstPort;
	BOOLEAN	status = TRUE;


	pSrcBuf = GET_OS_PKT_DATAPTR(pPacket);
	pktLen = GET_OS_PKT_LEN(pPacket);

	ASSERT(pSrcBuf);

	RTMP_SET_PACKET_SPECIFIC(pPacket, 0);

	// get Ethernet protocol field
	TypeLen = (pSrcBuf[12] << 8) + pSrcBuf[13];

	pSrcBuf += LENGTH_802_3;	// Skip the Ethernet Header.

	if (TypeLen <= 1500)
	{	// 802.3, 802.3 LLC
		/*
			DestMAC(6) + SrcMAC(6) + Lenght(2) +
			DSAP(1) + SSAP(1) + Control(1) +
			if the DSAP = 0xAA, SSAP=0xAA, Contorl = 0x03, it has a 5-bytes SNAP header.
				=> + SNAP (5, OriginationID(3) + etherType(2))
		*/
		if (pSrcBuf[0] == 0xAA && pSrcBuf[1] == 0xAA && pSrcBuf[2] == 0x03)
		{
			Sniff2BytesFromNdisBuffer(pSrcBuf, 6, &Byte0, &Byte1);
			RTMP_SET_PACKET_LLCSNAP(pPacket, 1);
			TypeLen = (USHORT)((Byte0 << 8) + Byte1);
			pSrcBuf += 8; // Skip this LLC/SNAP header
		}
		else
		{
			//It just has 3-byte LLC header, maybe a legacy ether type frame. we didn't handle it.
		}
	}

	// If it's a VLAN packet, get the real Type/Length field.
	if (TypeLen == 0x8100)
	{
		/* 0x8100 means VLAN packets */

		/* Dest. MAC Address (6-bytes) +
		   Source MAC Address (6-bytes) +
		   Length/Type = 802.1Q Tag Type (2-byte) +
		   Tag Control Information (2-bytes) +
		   Length / Type (2-bytes) +
		   data payload (0-n bytes) +
		   Pad (0-p bytes) +
		   Frame Check Sequence (4-bytes) */

		RTMP_SET_PACKET_VLAN(pPacket, 1);
		Sniff2BytesFromNdisBuffer(pSrcBuf, 2, &Byte0, &Byte1);
		TypeLen = (USHORT)((Byte0 << 8) + Byte1);

		pSrcBuf += 4; // Skip the VLAN Header.
	}

	switch (TypeLen)
	{
		case 0x0800:
			{
				ASSERT((pktLen > 34));
				if (*(pSrcBuf + 9) == 0x11)
				{	// udp packet
					ASSERT((pktLen > 34));	// 14 for ethernet header, 20 for IP header

					pSrcBuf += 20;	// Skip the IP header
					srcPort = OS_NTOHS(*((UINT16 *)pSrcBuf));
					dstPort = OS_NTOHS(*((UINT16 *)(pSrcBuf +2)));

					if ((srcPort==0x44 && dstPort==0x43) || (srcPort==0x43 && dstPort==0x44))
					{	//It's a BOOTP/DHCP packet
						RTMP_SET_PACKET_DHCP(pPacket, 1);
					}
				}
			}
			break;
		case 0x0806:
			{
				//ARP Packet.
				RTMP_SET_PACKET_DHCP(pPacket, 1);
			}
			break;
		case 0x888e:
			{
				// EAPOL Packet.
				RTMP_SET_PACKET_EAPOL(pPacket, 1);
			}
			break;
		default:
			status = FALSE;
			break;
	}

	return status;

}


VOID Update_Rssi_Sample(
	IN PRTMP_ADAPTER	pAd,
	IN RSSI_SAMPLE		*pRssi,
	IN PRXWI_STRUC		pRxWI)
		{
	CHAR	rssi0 = pRxWI->RSSI0;
	CHAR	rssi1 = pRxWI->RSSI1;
	CHAR	rssi2 = pRxWI->RSSI2;

	if (rssi0 != 0)
	{
		pRssi->LastRssi0	= ConvertToRssi(pAd, (CHAR)rssi0, RSSI_0);
		pRssi->AvgRssi0X8	= (pRssi->AvgRssi0X8 - pRssi->AvgRssi0) + pRssi->LastRssi0;
		pRssi->AvgRssi0	= pRssi->AvgRssi0X8 >> 3;
	}

	if (rssi1 != 0)
	{
		pRssi->LastRssi1	= ConvertToRssi(pAd, (CHAR)rssi1, RSSI_1);
		pRssi->AvgRssi1X8	= (pRssi->AvgRssi1X8 - pRssi->AvgRssi1) + pRssi->LastRssi1;
		pRssi->AvgRssi1	= pRssi->AvgRssi1X8 >> 3;
	}

	if (rssi2 != 0)
	{
		pRssi->LastRssi2	= ConvertToRssi(pAd, (CHAR)rssi2, RSSI_2);
		pRssi->AvgRssi2X8  = (pRssi->AvgRssi2X8 - pRssi->AvgRssi2) + pRssi->LastRssi2;
		pRssi->AvgRssi2 = pRssi->AvgRssi2X8 >> 3;
	}
}


// Normal legacy Rx packet indication
VOID Indicate_Legacy_Packet(
	IN	PRTMP_ADAPTER	pAd,
	IN	RX_BLK			*pRxBlk,
	IN	UCHAR			FromWhichBSSID)
{
	PNDIS_PACKET	pRxPacket = pRxBlk->pRxPacket;
	UCHAR			Header802_3[LENGTH_802_3];

	// 1. get 802.3 Header
	// 2. remove LLC
	// 		a. pointer pRxBlk->pData to payload
	//      b. modify pRxBlk->DataSize
#ifdef CONFIG_STA_SUPPORT
	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
		RTMP_802_11_REMOVE_LLC_AND_CONVERT_TO_802_3(pRxBlk, Header802_3);
#endif // CONFIG_STA_SUPPORT //

	if (pRxBlk->DataSize > MAX_RX_PKT_LEN)
	{
		// release packet
		RELEASE_NDIS_PACKET(pAd, pRxPacket, NDIS_STATUS_FAILURE);
		return;
	}


	STATS_INC_RX_PACKETS(pAd, FromWhichBSSID);

#ifdef RT2870
#ifdef DOT11_N_SUPPORT
	if (pAd->CommonCfg.bDisableReordering == 0)
	{
		PBA_REC_ENTRY		pBAEntry;
		ULONG				Now32;
		UCHAR				Wcid = pRxBlk->pRxWI->WirelessCliID;
		UCHAR				TID = pRxBlk->pRxWI->TID;
		USHORT				Idx;

#define REORDERING_PACKET_TIMEOUT		((100 * HZ)/1000)	// system ticks -- 100 ms

		if (Wcid < MAX_LEN_OF_MAC_TABLE)
		{
			Idx = pAd->MacTab.Content[Wcid].BARecWcidArray[TID];
			if (Idx != 0)
			{
				pBAEntry = &pAd->BATable.BARecEntry[Idx];
				// update last rx time
				NdisGetSystemUpTime(&Now32);
				if ((pBAEntry->list.qlen > 0) &&
					 RTMP_TIME_AFTER((unsigned long)Now32, (unsigned long)(pBAEntry->LastIndSeqAtTimer+(REORDERING_PACKET_TIMEOUT)))
	   				)
				{
					printk("Indicate_Legacy_Packet():flush reordering_timeout_mpdus! RxWI->Flags=%d, pRxWI.TID=%d, RxD->AMPDU=%d!\n", pRxBlk->Flags, pRxBlk->pRxWI->TID, pRxBlk->RxD.AMPDU);
					hex_dump("Dump the legacy Packet:", GET_OS_PKT_DATAPTR(pRxBlk->pRxPacket), 64);
					ba_flush_reordering_timeout_mpdus(pAd, pBAEntry, Now32);
				}
			}
		}
	}
#endif // DOT11_N_SUPPORT //
#endif // RT2870 //

	wlan_802_11_to_802_3_packet(pAd, pRxBlk, Header802_3, FromWhichBSSID);

	//
	// pass this 802.3 packet to upper layer or forward this packet to WM directly
	//
#ifdef CONFIG_STA_SUPPORT
	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
		ANNOUNCE_OR_FORWARD_802_3_PACKET(pAd, pRxPacket, FromWhichBSSID);
#endif // CONFIG_STA_SUPPORT //

}


// Normal, AMPDU or AMSDU
VOID CmmRxnonRalinkFrameIndicate(
	IN	PRTMP_ADAPTER	pAd,
	IN	RX_BLK			*pRxBlk,
	IN	UCHAR			FromWhichBSSID)
{
#ifdef DOT11_N_SUPPORT
	if (RX_BLK_TEST_FLAG(pRxBlk, fRX_AMPDU) && (pAd->CommonCfg.bDisableReordering == 0))
	{
		Indicate_AMPDU_Packet(pAd, pRxBlk, FromWhichBSSID);
	}
	else
#endif // DOT11_N_SUPPORT //
	{
#ifdef DOT11_N_SUPPORT
		if (RX_BLK_TEST_FLAG(pRxBlk, fRX_AMSDU))
		{
			// handle A-MSDU
			Indicate_AMSDU_Packet(pAd, pRxBlk, FromWhichBSSID);
		}
		else
#endif // DOT11_N_SUPPORT //
		{
			Indicate_Legacy_Packet(pAd, pRxBlk, FromWhichBSSID);
		}
	}
}


VOID CmmRxRalinkFrameIndicate(
	IN	PRTMP_ADAPTER	pAd,
	IN	MAC_TABLE_ENTRY	*pEntry,
	IN	RX_BLK			*pRxBlk,
	IN	UCHAR			FromWhichBSSID)
{
	UCHAR			Header802_3[LENGTH_802_3];
	UINT16			Msdu2Size;
	UINT16 			Payload1Size, Payload2Size;
	PUCHAR 			pData2;
	PNDIS_PACKET	pPacket2 = NULL;


	Msdu2Size = *(pRxBlk->pData) + (*(pRxBlk->pData+1) << 8);

	if ((Msdu2Size <= 1536) && (Msdu2Size < pRxBlk->DataSize))
	{
		/* skip two byte MSDU2 len */
		pRxBlk->pData += 2;
		pRxBlk->DataSize -= 2;
	}
	else
	{
		// release packet
		RELEASE_NDIS_PACKET(pAd, pRxBlk->pRxPacket, NDIS_STATUS_FAILURE);
		return;
	}

	// get 802.3 Header and  remove LLC
#ifdef CONFIG_STA_SUPPORT
	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
		RTMP_802_11_REMOVE_LLC_AND_CONVERT_TO_802_3(pRxBlk, Header802_3);
#endif // CONFIG_STA_SUPPORT //


	ASSERT(pRxBlk->pRxPacket);

	// Ralink Aggregation frame
	pAd->RalinkCounters.OneSecRxAggregationCount ++;
	Payload1Size = pRxBlk->DataSize - Msdu2Size;
	Payload2Size = Msdu2Size - LENGTH_802_3;

	pData2 = pRxBlk->pData + Payload1Size + LENGTH_802_3;
#ifdef CONFIG_STA_SUPPORT
	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
		pPacket2 = duplicate_pkt(pAd, (pData2-LENGTH_802_3), LENGTH_802_3, pData2, Payload2Size, FromWhichBSSID);
#endif // CONFIG_STA_SUPPORT //

	if (!pPacket2)
	{
		// release packet
		RELEASE_NDIS_PACKET(pAd, pRxBlk->pRxPacket, NDIS_STATUS_FAILURE);
		return;
	}

	// update payload size of 1st packet
	pRxBlk->DataSize = Payload1Size;
	wlan_802_11_to_802_3_packet(pAd, pRxBlk, Header802_3, FromWhichBSSID);

#ifdef CONFIG_STA_SUPPORT
	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
		ANNOUNCE_OR_FORWARD_802_3_PACKET(pAd, pRxBlk->pRxPacket, FromWhichBSSID);
#endif // CONFIG_STA_SUPPORT //

	if (pPacket2)
	{
#ifdef CONFIG_STA_SUPPORT
		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
			ANNOUNCE_OR_FORWARD_802_3_PACKET(pAd, pPacket2, FromWhichBSSID);
#endif // CONFIG_STA_SUPPORT //
	}
}


#define RESET_FRAGFRAME(_fragFrame) \
	{								\
		_fragFrame.RxSize = 0;		\
		_fragFrame.Sequence = 0;	\
		_fragFrame.LastFrag = 0;	\
		_fragFrame.Flags = 0;		\
	}


PNDIS_PACKET RTMPDeFragmentDataFrame(
	IN	PRTMP_ADAPTER	pAd,
	IN	RX_BLK			*pRxBlk)
{
	PHEADER_802_11	pHeader = pRxBlk->pHeader;
	PNDIS_PACKET	pRxPacket = pRxBlk->pRxPacket;
	UCHAR			*pData = pRxBlk->pData;
	USHORT			DataSize = pRxBlk->DataSize;
	PNDIS_PACKET	pRetPacket = NULL;
	UCHAR			*pFragBuffer = NULL;
	BOOLEAN 		bReassDone = FALSE;
	UCHAR			HeaderRoom = 0;


	ASSERT(pHeader);

	HeaderRoom = pData - (UCHAR *)pHeader;

	// Re-assemble the fragmented packets
	if (pHeader->Frag == 0)		// Frag. Number is 0 : First frag or only one pkt
	{
		// the first pkt of fragment, record it.
		if (pHeader->FC.MoreFrag)
		{
			ASSERT(pAd->FragFrame.pFragPacket);
			pFragBuffer = GET_OS_PKT_DATAPTR(pAd->FragFrame.pFragPacket);
			pAd->FragFrame.RxSize   = DataSize + HeaderRoom;
			NdisMoveMemory(pFragBuffer,	 pHeader, pAd->FragFrame.RxSize);
			pAd->FragFrame.Sequence = pHeader->Sequence;
			pAd->FragFrame.LastFrag = pHeader->Frag;	   // Should be 0
			ASSERT(pAd->FragFrame.LastFrag == 0);
			goto done;	// end of processing this frame
		}
	}
	else	//Middle & End of fragment
	{
		if ((pHeader->Sequence != pAd->FragFrame.Sequence) ||
			(pHeader->Frag != (pAd->FragFrame.LastFrag + 1)))
		{
			// Fragment is not the same sequence or out of fragment number order
			// Reset Fragment control blk
			RESET_FRAGFRAME(pAd->FragFrame);
			DBGPRINT(RT_DEBUG_ERROR, ("Fragment is not the same sequence or out of fragment number order.\n"));
			goto done; // give up this frame
		}
		else if ((pAd->FragFrame.RxSize + DataSize) > MAX_FRAME_SIZE)
		{
			// Fragment frame is too large, it exeeds the maximum frame size.
			// Reset Fragment control blk
			RESET_FRAGFRAME(pAd->FragFrame);
			DBGPRINT(RT_DEBUG_ERROR, ("Fragment frame is too large, it exeeds the maximum frame size.\n"));
			goto done; // give up this frame
		}

        //
		// Broadcom AP(BCM94704AGR) will send out LLC in fragment's packet, LLC only can accpet at first fragment.
		// In this case, we will dropt it.
		//
		if (NdisEqualMemory(pData, SNAP_802_1H, sizeof(SNAP_802_1H)))
		{
			DBGPRINT(RT_DEBUG_ERROR, ("Find another LLC at Middle or End fragment(SN=%d, Frag=%d)\n", pHeader->Sequence, pHeader->Frag));
			goto done; // give up this frame
		}

		pFragBuffer = GET_OS_PKT_DATAPTR(pAd->FragFrame.pFragPacket);

		// concatenate this fragment into the re-assembly buffer
		NdisMoveMemory((pFragBuffer + pAd->FragFrame.RxSize), pData, DataSize);
		pAd->FragFrame.RxSize  += DataSize;
		pAd->FragFrame.LastFrag = pHeader->Frag;	   // Update fragment number

		// Last fragment
		if (pHeader->FC.MoreFrag == FALSE)
		{
			bReassDone = TRUE;
		}
	}

done:
	// always release rx fragmented packet
	RELEASE_NDIS_PACKET(pAd, pRxPacket, NDIS_STATUS_FAILURE);

	// return defragmented packet if packet is reassembled completely
	// otherwise return NULL
	if (bReassDone)
	{
		PNDIS_PACKET pNewFragPacket;

		// allocate a new packet buffer for fragment
		pNewFragPacket = RTMP_AllocateFragPacketBuffer(pAd, RX_BUFFER_NORMSIZE);
		if (pNewFragPacket)
		{
			// update RxBlk
			pRetPacket = pAd->FragFrame.pFragPacket;
			pAd->FragFrame.pFragPacket = pNewFragPacket;
			pRxBlk->pHeader = (PHEADER_802_11) GET_OS_PKT_DATAPTR(pRetPacket);
			pRxBlk->pData = (UCHAR *)pRxBlk->pHeader + HeaderRoom;
			pRxBlk->DataSize = pAd->FragFrame.RxSize - HeaderRoom;
			pRxBlk->pRxPacket = pRetPacket;
		}
		else
		{
			RESET_FRAGFRAME(pAd->FragFrame);
		}
	}

	return pRetPacket;
}


VOID Indicate_AMSDU_Packet(
	IN	PRTMP_ADAPTER	pAd,
	IN	RX_BLK			*pRxBlk,
	IN	UCHAR			FromWhichBSSID)
{
	UINT			nMSDU;

	update_os_packet_info(pAd, pRxBlk, FromWhichBSSID);
	RTMP_SET_PACKET_IF(pRxBlk->pRxPacket, FromWhichBSSID);
	nMSDU = deaggregate_AMSDU_announce(pAd, pRxBlk->pRxPacket, pRxBlk->pData, pRxBlk->DataSize);
}

VOID Indicate_EAPOL_Packet(
	IN	PRTMP_ADAPTER	pAd,
	IN	RX_BLK			*pRxBlk,
	IN	UCHAR			FromWhichBSSID)
{
	MAC_TABLE_ENTRY *pEntry = NULL;


#ifdef CONFIG_STA_SUPPORT
	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
	{
		pEntry = &pAd->MacTab.Content[BSSID_WCID];
		STARxEAPOLFrameIndicate(pAd, pEntry, pRxBlk, FromWhichBSSID);
		return;
	}
#endif // CONFIG_STA_SUPPORT //

	if (pEntry == NULL)
	{
		DBGPRINT(RT_DEBUG_WARN, ("Indicate_EAPOL_Packet: drop and release the invalid packet.\n"));
		// release packet
		RELEASE_NDIS_PACKET(pAd, pRxBlk->pRxPacket, NDIS_STATUS_FAILURE);
		return;
	}
}

#define BCN_TBTT_OFFSET		64	//defer 64 us
VOID ReSyncBeaconTime(
	IN  PRTMP_ADAPTER   pAd)
{

	UINT32  Offset;


	Offset = (pAd->TbttTickCount) % (BCN_TBTT_OFFSET);

	pAd->TbttTickCount++;

	//
	// The updated BeaconInterval Value will affect Beacon Interval after two TBTT
	// beacasue the original BeaconInterval had been loaded into next TBTT_TIMER
	//
	if (Offset == (BCN_TBTT_OFFSET-2))
	{
		BCN_TIME_CFG_STRUC csr;
		RTMP_IO_READ32(pAd, BCN_TIME_CFG, &csr.word);
		csr.field.BeaconInterval = (pAd->CommonCfg.BeaconPeriod << 4) - 1 ;	// ASIC register in units of 1/16 TU = 64us
		RTMP_IO_WRITE32(pAd, BCN_TIME_CFG, csr.word);
	}
	else
	{
		if (Offset == (BCN_TBTT_OFFSET-1))
		{
			BCN_TIME_CFG_STRUC csr;

			RTMP_IO_READ32(pAd, BCN_TIME_CFG, &csr.word);
			csr.field.BeaconInterval = (pAd->CommonCfg.BeaconPeriod) << 4; // ASIC register in units of 1/16 TU
			RTMP_IO_WRITE32(pAd, BCN_TIME_CFG, csr.word);
		}
	}
}