Fix typo in various Kconfig file
Correct spelling typo in various Kconfig file.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu
index 8a9c767..51b3274c 100644
--- a/arch/m68k/Kconfig.cpu
+++ b/arch/m68k/Kconfig.cpu
@@ -7,7 +7,7 @@
help
The Freescale (was Motorola) M68K family of processors implements
the full 68000 processor instruction set.
- The Freescale ColdFire family of processors is a modern derivitive
+ The Freescale ColdFire family of processors is a modern derivative
of the 68000 processor family. They are mainly targeted at embedded
applications, and are all System-On-Chip (SOC) devices, as opposed
to stand alone CPUs. They implement a subset of the original 68000
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index ce30e2f..923a6c3 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1001,12 +1001,12 @@
bool
#
-# Endianess selection. Sufficiently obscure so many users don't know what to
+# Endianness selection. Sufficiently obscure so many users don't know what to
# answer,so we try hard to limit the available choices. Also the use of a
# choice statement should be more obvious to the user.
#
choice
- prompt "Endianess selection"
+ prompt "Endianness selection"
help
Some MIPS machines can be configured for either little or big endian
byte order. These modes require different kernels and a different
diff --git a/arch/mips/Kconfig.debug b/arch/mips/Kconfig.debug
index 83ed00a..5a43aa0 100644
--- a/arch/mips/Kconfig.debug
+++ b/arch/mips/Kconfig.debug
@@ -57,7 +57,7 @@
options.
config CMDLINE_OVERRIDE
- bool "Built-in command line overrides firware arguments"
+ bool "Built-in command line overrides firmware arguments"
default n
depends on CMDLINE_BOOL
help
diff --git a/arch/openrisc/Kconfig b/arch/openrisc/Kconfig
index a478719..66dff20 100644
--- a/arch/openrisc/Kconfig
+++ b/arch/openrisc/Kconfig
@@ -141,7 +141,7 @@
bool "Check for kernel stack overflow"
default y
help
- Make extra checks for space avaliable on stack in some
+ Make extra checks for space available on stack in some
critical functions. This will cause kernel to run a bit slower,
but will catch most of kernel stack overruns and exit gracefuly.
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index 425db18..9c80fc0 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -258,7 +258,7 @@
default y
---help---
The PID register in server is used explicitly for ICSWX. In
- embedded systems PID managment is done by the system.
+ embedded systems PID management is done by the system.
config PPC_ICSWX_USE_SIGILL
bool "Should a bad CT cause a SIGILL?"
@@ -266,7 +266,7 @@
default n
---help---
Should a bad CT used for "non-record form ICSWX" cause an
- illegal intruction signal or should it be silent as
+ illegal instruction signal or should it be silent as
architected.
If in doubt, say N here.
diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig
index aadbe4f..10ad207 100644
--- a/arch/powerpc/platforms/pseries/Kconfig
+++ b/arch/powerpc/platforms/pseries/Kconfig
@@ -67,7 +67,7 @@
This option will only enable the IO event platform code. You
will still need to enable or compile the actual drivers
- that use this infrastruture to handle IO event interrupts.
+ that use this infrastructure to handle IO event interrupts.
Say Y if you are unsure.
diff --git a/arch/sh/Kconfig.cpu b/arch/sh/Kconfig.cpu
index ddf096c..770ff2d 100644
--- a/arch/sh/Kconfig.cpu
+++ b/arch/sh/Kconfig.cpu
@@ -1,7 +1,7 @@
menu "Processor features"
choice
- prompt "Endianess selection"
+ prompt "Endianness selection"
default CPU_LITTLE_ENDIAN
help
Some SuperH machines can be configured for either little or big
diff --git a/drivers/devfreq/Kconfig b/drivers/devfreq/Kconfig
index 464fa21..f6b0a6e2 100644
--- a/drivers/devfreq/Kconfig
+++ b/drivers/devfreq/Kconfig
@@ -16,7 +16,7 @@
is attached to a single device and returns a "representative"
clock frequency of the device, which is also attached
to a device by 1-to-1. The device registering devfreq takes the
- responsiblity to "interpret" the representative frequency and
+ responsibility to "interpret" the representative frequency and
to set its every clock accordingly with the "target" callback
given to devfreq.
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index a3d0332..478eb4a 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -448,7 +448,7 @@
select FB_SYS_FOPS
---help---
Provide access to PicoLCD's 256x64 monochrome display via a
- frambuffer device.
+ framebuffer device.
config HID_PICOLCD_BACKLIGHT
bool "Backlight control" if EXPERT
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 8deedc1..e466ecb 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -318,7 +318,7 @@
tristate "Temperature sensor on Samsung EXYNOS4"
depends on ARCH_EXYNOS4
help
- If you say yes here you get support for TMU (Thermal Managment
+ If you say yes here you get support for TMU (Thermal Management
Unit) on SAMSUNG EXYNOS4 series of SoC.
This driver can also be built as a module. If so, the module
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index d2c5095..94468a6 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -351,7 +351,7 @@
For details please see http://www.ti.com/davinci
config I2C_DESIGNWARE_PLATFORM
- tristate "Synopsys DesignWare Platfrom"
+ tristate "Synopsys DesignWare Platform"
depends on HAVE_CLK
help
If you say yes to this option, support will be included for the
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 29f463c..639e1fc 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -407,7 +407,7 @@
select MFD_CORE
help
Say yes here to support for Maxim Semiconductor MAX8925. This is
- a Power Management IC. This driver provies common support for
+ a Power Management IC. This driver provides common support for
accessing the device, additional drivers must be enabled in order
to use the functionality of the device.
@@ -430,7 +430,7 @@
help
Say yes here to support for Maxim Semiconductor MAX8998 and
National Semiconductor LP3974. This is a Power Management IC.
- This driver provies common support for accessing the device,
+ This driver provides common support for accessing the device,
additional drivers must be enabled in order to use the functionality
of the device.
@@ -441,7 +441,7 @@
select REGMAP_I2C
help
Support for the Samsung Electronics S5M MFD series.
- This driver provies common support for accessing the device,
+ This driver provides common support for accessing the device,
additional drivers must be enabled in order to use the functionality
of the device
diff --git a/drivers/ptp/Kconfig b/drivers/ptp/Kconfig
index cd9bc3b..b4b918a 100644
--- a/drivers/ptp/Kconfig
+++ b/drivers/ptp/Kconfig
@@ -70,7 +70,7 @@
using the SO_TIMESTAMPING API.
In order for this to work, your MAC driver must also
- implement the skb_tx_timetamp() function.
+ implement the skb_tx_timestamp() function.
config PTP_1588_CLOCK_PCH
tristate "Intel PCH EG20T as PTP clock"
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 3709624..eeea76f 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -937,7 +937,7 @@
tristate "Broadcom BCM47xx Watchdog Timer"
depends on BCM47XX
help
- Hardware driver for the Broadcom BCM47xx Watchog Timer.
+ Hardware driver for the Broadcom BCM47xx Watchdog Timer.
config RC32434_WDT
tristate "IDT RC32434 SoC Watchdog Timer"
diff --git a/drivers/xen/Kconfig b/drivers/xen/Kconfig
index 9424313..73f1c99 100644
--- a/drivers/xen/Kconfig
+++ b/drivers/xen/Kconfig
@@ -71,7 +71,7 @@
tristate "Xen /dev/xen/evtchn device"
default y
help
- The evtchn driver allows a userspace process to triger event
+ The evtchn driver allows a userspace process to trigger event
channels and to receive notification of an event channel
firing.
If in doubt, say yes.
