| // SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0 |
| /****************************************************************************** |
| * |
| * Name: hwxfsleep.c - ACPI Hardware Sleep/Wake External Interfaces |
| * |
| * Copyright (C) 2000 - 2021, Intel Corp. |
| * |
| *****************************************************************************/ |
| |
| #define EXPORT_ACPI_INTERFACES |
| |
| #include <acpi/acpi.h> |
| #include "accommon.h" |
| |
| #define _COMPONENT ACPI_HARDWARE |
| ACPI_MODULE_NAME("hwxfsleep") |
| |
| /* Local prototypes */ |
| #if (!ACPI_REDUCED_HARDWARE) |
| static acpi_status |
| acpi_hw_set_firmware_waking_vector(struct acpi_table_facs *facs, |
| acpi_physical_address physical_address, |
| acpi_physical_address physical_address64); |
| #endif |
| |
| /* |
| * These functions are removed for the ACPI_REDUCED_HARDWARE case: |
| * acpi_set_firmware_waking_vector |
| * acpi_enter_sleep_state_s4bios |
| */ |
| |
| #if (!ACPI_REDUCED_HARDWARE) |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_hw_set_firmware_waking_vector |
| * |
| * PARAMETERS: facs - Pointer to FACS table |
| * physical_address - 32-bit physical address of ACPI real mode |
| * entry point |
| * physical_address64 - 64-bit physical address of ACPI protected |
| * mode entry point |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Sets the firmware_waking_vector fields of the FACS |
| * |
| ******************************************************************************/ |
| |
| static acpi_status |
| acpi_hw_set_firmware_waking_vector(struct acpi_table_facs *facs, |
| acpi_physical_address physical_address, |
| acpi_physical_address physical_address64) |
| { |
| ACPI_FUNCTION_TRACE(acpi_hw_set_firmware_waking_vector); |
| |
| |
| /* |
| * According to the ACPI specification 2.0c and later, the 64-bit |
| * waking vector should be cleared and the 32-bit waking vector should |
| * be used, unless we want the wake-up code to be called by the BIOS in |
| * Protected Mode. Some systems (for example HP dv5-1004nr) are known |
| * to fail to resume if the 64-bit vector is used. |
| */ |
| |
| /* Set the 32-bit vector */ |
| |
| facs->firmware_waking_vector = (u32)physical_address; |
| |
| if (facs->length > 32) { |
| if (facs->version >= 1) { |
| |
| /* Set the 64-bit vector */ |
| |
| facs->xfirmware_waking_vector = physical_address64; |
| } else { |
| /* Clear the 64-bit vector if it exists */ |
| |
| facs->xfirmware_waking_vector = 0; |
| } |
| } |
| |
| return_ACPI_STATUS(AE_OK); |
| } |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_set_firmware_waking_vector |
| * |
| * PARAMETERS: physical_address - 32-bit physical address of ACPI real mode |
| * entry point |
| * physical_address64 - 64-bit physical address of ACPI protected |
| * mode entry point |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Sets the firmware_waking_vector fields of the FACS |
| * |
| ******************************************************************************/ |
| |
| acpi_status |
| acpi_set_firmware_waking_vector(acpi_physical_address physical_address, |
| acpi_physical_address physical_address64) |
| { |
| |
| ACPI_FUNCTION_TRACE(acpi_set_firmware_waking_vector); |
| |
| if (acpi_gbl_FACS) { |
| (void)acpi_hw_set_firmware_waking_vector(acpi_gbl_FACS, |
| physical_address, |
| physical_address64); |
| } |
| |
| return_ACPI_STATUS(AE_OK); |
| } |
| |
| ACPI_EXPORT_SYMBOL(acpi_set_firmware_waking_vector) |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_enter_sleep_state_s4bios |
| * |
| * PARAMETERS: None |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Perform a S4 bios request. |
| * THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED |
| * |
| ******************************************************************************/ |
| acpi_status acpi_enter_sleep_state_s4bios(void) |
| { |
| u32 in_value; |
| acpi_status status; |
| |
| ACPI_FUNCTION_TRACE(acpi_enter_sleep_state_s4bios); |
| |
| /* Clear the wake status bit (PM1) */ |
| |
| status = |
| acpi_write_bit_register(ACPI_BITREG_WAKE_STATUS, ACPI_CLEAR_STATUS); |
| if (ACPI_FAILURE(status)) { |
| return_ACPI_STATUS(status); |
| } |
| |
| status = acpi_hw_clear_acpi_status(); |
| if (ACPI_FAILURE(status)) { |
| return_ACPI_STATUS(status); |
| } |
| |
| /* |
| * 1) Disable all GPEs |
| * 2) Enable all wakeup GPEs |
| */ |
| status = acpi_hw_disable_all_gpes(); |
| if (ACPI_FAILURE(status)) { |
| return_ACPI_STATUS(status); |
| } |
| acpi_gbl_system_awake_and_running = FALSE; |
| |
| status = acpi_hw_enable_all_wakeup_gpes(); |
| if (ACPI_FAILURE(status)) { |
| return_ACPI_STATUS(status); |
| } |
| |
| ACPI_FLUSH_CPU_CACHE(); |
| |
| status = acpi_hw_write_port(acpi_gbl_FADT.smi_command, |
| (u32)acpi_gbl_FADT.s4_bios_request, 8); |
| if (ACPI_FAILURE(status)) { |
| return_ACPI_STATUS(status); |
| } |
| |
| do { |
| acpi_os_stall(ACPI_USEC_PER_MSEC); |
| status = |
| acpi_read_bit_register(ACPI_BITREG_WAKE_STATUS, &in_value); |
| if (ACPI_FAILURE(status)) { |
| return_ACPI_STATUS(status); |
| } |
| |
| } while (!in_value); |
| |
| return_ACPI_STATUS(AE_OK); |
| } |
| |
| ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state_s4bios) |
| #endif /* !ACPI_REDUCED_HARDWARE */ |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_enter_sleep_state_prep |
| * |
| * PARAMETERS: sleep_state - Which sleep state to enter |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Prepare to enter a system sleep state. |
| * This function must execute with interrupts enabled. |
| * We break sleeping into 2 stages so that OSPM can handle |
| * various OS-specific tasks between the two steps. |
| * |
| ******************************************************************************/ |
| |
| acpi_status acpi_enter_sleep_state_prep(u8 sleep_state) |
| { |
| acpi_status status; |
| struct acpi_object_list arg_list; |
| union acpi_object arg; |
| u32 sst_value; |
| |
| ACPI_FUNCTION_TRACE(acpi_enter_sleep_state_prep); |
| |
| status = acpi_get_sleep_type_data(sleep_state, |
| &acpi_gbl_sleep_type_a, |
| &acpi_gbl_sleep_type_b); |
| if (ACPI_FAILURE(status)) { |
| return_ACPI_STATUS(status); |
| } |
| |
| status = acpi_get_sleep_type_data(ACPI_STATE_S0, |
| &acpi_gbl_sleep_type_a_s0, |
| &acpi_gbl_sleep_type_b_s0); |
| if (ACPI_FAILURE(status)) { |
| acpi_gbl_sleep_type_a_s0 = ACPI_SLEEP_TYPE_INVALID; |
| } |
| |
| /* Execute the _PTS method (Prepare To Sleep) */ |
| |
| arg_list.count = 1; |
| arg_list.pointer = &arg; |
| arg.type = ACPI_TYPE_INTEGER; |
| arg.integer.value = sleep_state; |
| |
| status = |
| acpi_evaluate_object(NULL, METHOD_PATHNAME__PTS, &arg_list, NULL); |
| if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { |
| return_ACPI_STATUS(status); |
| } |
| |
| /* Setup the argument to the _SST method (System STatus) */ |
| |
| switch (sleep_state) { |
| case ACPI_STATE_S0: |
| |
| sst_value = ACPI_SST_WORKING; |
| break; |
| |
| case ACPI_STATE_S1: |
| case ACPI_STATE_S2: |
| case ACPI_STATE_S3: |
| |
| sst_value = ACPI_SST_SLEEPING; |
| break; |
| |
| case ACPI_STATE_S4: |
| |
| sst_value = ACPI_SST_SLEEP_CONTEXT; |
| break; |
| |
| default: |
| |
| sst_value = ACPI_SST_INDICATOR_OFF; /* Default is off */ |
| break; |
| } |
| |
| /* |
| * Set the system indicators to show the desired sleep state. |
| * _SST is an optional method (return no error if not found) |
| */ |
| acpi_hw_execute_sleep_method(METHOD_PATHNAME__SST, sst_value); |
| return_ACPI_STATUS(AE_OK); |
| } |
| |
| ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state_prep) |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_enter_sleep_state |
| * |
| * PARAMETERS: sleep_state - Which sleep state to enter |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Enter a system sleep state |
| * THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED |
| * |
| ******************************************************************************/ |
| acpi_status acpi_enter_sleep_state(u8 sleep_state) |
| { |
| acpi_status status; |
| |
| ACPI_FUNCTION_TRACE(acpi_enter_sleep_state); |
| |
| if ((acpi_gbl_sleep_type_a > ACPI_SLEEP_TYPE_MAX) || |
| (acpi_gbl_sleep_type_b > ACPI_SLEEP_TYPE_MAX)) { |
| ACPI_ERROR((AE_INFO, "Sleep values out of range: A=0x%X B=0x%X", |
| acpi_gbl_sleep_type_a, acpi_gbl_sleep_type_b)); |
| return_ACPI_STATUS(AE_AML_OPERAND_VALUE); |
| } |
| |
| #if !ACPI_REDUCED_HARDWARE |
| if (!acpi_gbl_reduced_hardware) |
| status = acpi_hw_legacy_sleep(sleep_state); |
| else |
| #endif |
| status = acpi_hw_extended_sleep(sleep_state); |
| return_ACPI_STATUS(status); |
| } |
| |
| ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state) |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_leave_sleep_state_prep |
| * |
| * PARAMETERS: sleep_state - Which sleep state we are exiting |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Perform the first state of OS-independent ACPI cleanup after a |
| * sleep. Called with interrupts DISABLED. |
| * We break wake/resume into 2 stages so that OSPM can handle |
| * various OS-specific tasks between the two steps. |
| * |
| ******************************************************************************/ |
| acpi_status acpi_leave_sleep_state_prep(u8 sleep_state) |
| { |
| acpi_status status; |
| |
| ACPI_FUNCTION_TRACE(acpi_leave_sleep_state_prep); |
| |
| #if !ACPI_REDUCED_HARDWARE |
| if (!acpi_gbl_reduced_hardware) |
| status = acpi_hw_legacy_wake_prep(sleep_state); |
| else |
| #endif |
| status = acpi_hw_extended_wake_prep(sleep_state); |
| return_ACPI_STATUS(status); |
| } |
| |
| ACPI_EXPORT_SYMBOL(acpi_leave_sleep_state_prep) |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_leave_sleep_state |
| * |
| * PARAMETERS: sleep_state - Which sleep state we are exiting |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Perform OS-independent ACPI cleanup after a sleep |
| * Called with interrupts ENABLED. |
| * |
| ******************************************************************************/ |
| acpi_status acpi_leave_sleep_state(u8 sleep_state) |
| { |
| acpi_status status; |
| |
| ACPI_FUNCTION_TRACE(acpi_leave_sleep_state); |
| |
| #if !ACPI_REDUCED_HARDWARE |
| if (!acpi_gbl_reduced_hardware) |
| status = acpi_hw_legacy_wake(sleep_state); |
| else |
| #endif |
| status = acpi_hw_extended_wake(sleep_state); |
| return_ACPI_STATUS(status); |
| } |
| |
| ACPI_EXPORT_SYMBOL(acpi_leave_sleep_state) |