| /* SPDX-License-Identifier: GPL-2.0-or-later */ |
| /* |
| * PowerPC version |
| * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) |
| * Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP |
| * Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu> |
| * Adapted for Power Macintosh by Paul Mackerras. |
| * Low-level exception handlers and MMU support |
| * rewritten by Paul Mackerras. |
| * Copyright (C) 1996 Paul Mackerras. |
| * MPC8xx modifications Copyright (C) 1997 Dan Malek (dmalek@jlc.net). |
| * |
| * This file contains the system call entry code, context switch |
| * code, and exception/interrupt return code for PowerPC. |
| */ |
| |
| #include <linux/errno.h> |
| #include <linux/err.h> |
| #include <asm/cache.h> |
| #include <asm/unistd.h> |
| #include <asm/processor.h> |
| #include <asm/page.h> |
| #include <asm/mmu.h> |
| #include <asm/thread_info.h> |
| #include <asm/code-patching-asm.h> |
| #include <asm/ppc_asm.h> |
| #include <asm/asm-offsets.h> |
| #include <asm/cputable.h> |
| #include <asm/firmware.h> |
| #include <asm/bug.h> |
| #include <asm/ptrace.h> |
| #include <asm/irqflags.h> |
| #include <asm/hw_irq.h> |
| #include <asm/context_tracking.h> |
| #include <asm/tm.h> |
| #include <asm/ppc-opcode.h> |
| #include <asm/barrier.h> |
| #include <asm/export.h> |
| #include <asm/asm-compat.h> |
| #ifdef CONFIG_PPC_BOOK3S |
| #include <asm/exception-64s.h> |
| #else |
| #include <asm/exception-64e.h> |
| #endif |
| #include <asm/feature-fixups.h> |
| #include <asm/kup.h> |
| |
| /* |
| * System calls. |
| */ |
| .section ".toc","aw" |
| SYS_CALL_TABLE: |
| .tc sys_call_table[TC],sys_call_table |
| |
| #ifdef CONFIG_COMPAT |
| COMPAT_SYS_CALL_TABLE: |
| .tc compat_sys_call_table[TC],compat_sys_call_table |
| #endif |
| |
| /* This value is used to mark exception frames on the stack. */ |
| exception_marker: |
| .tc ID_EXC_MARKER[TC],STACK_FRAME_REGS_MARKER |
| |
| .section ".text" |
| .align 7 |
| |
| #ifdef CONFIG_PPC_BOOK3S |
| .macro system_call_vectored name trapnr |
| .globl system_call_vectored_\name |
| system_call_vectored_\name: |
| _ASM_NOKPROBE_SYMBOL(system_call_vectored_\name) |
| #ifdef CONFIG_PPC_TRANSACTIONAL_MEM |
| BEGIN_FTR_SECTION |
| extrdi. r10, r12, 1, (63-MSR_TS_T_LG) /* transaction active? */ |
| bne .Ltabort_syscall |
| END_FTR_SECTION_IFSET(CPU_FTR_TM) |
| #endif |
| SCV_INTERRUPT_TO_KERNEL |
| mr r10,r1 |
| ld r1,PACAKSAVE(r13) |
| std r10,0(r1) |
| std r11,_NIP(r1) |
| std r12,_MSR(r1) |
| std r0,GPR0(r1) |
| std r10,GPR1(r1) |
| std r2,GPR2(r1) |
| ld r2,PACATOC(r13) |
| mfcr r12 |
| li r11,0 |
| /* Can we avoid saving r3-r8 in common case? */ |
| std r3,GPR3(r1) |
| std r4,GPR4(r1) |
| std r5,GPR5(r1) |
| std r6,GPR6(r1) |
| std r7,GPR7(r1) |
| std r8,GPR8(r1) |
| /* Zero r9-r12, this should only be required when restoring all GPRs */ |
| std r11,GPR9(r1) |
| std r11,GPR10(r1) |
| std r11,GPR11(r1) |
| std r11,GPR12(r1) |
| std r9,GPR13(r1) |
| SAVE_NVGPRS(r1) |
| std r11,_XER(r1) |
| std r11,_LINK(r1) |
| std r11,_CTR(r1) |
| |
| li r11,\trapnr |
| std r11,_TRAP(r1) |
| std r12,_CCR(r1) |
| std r3,ORIG_GPR3(r1) |
| addi r10,r1,STACK_FRAME_OVERHEAD |
| ld r11,exception_marker@toc(r2) |
| std r11,-16(r10) /* "regshere" marker */ |
| |
| BEGIN_FTR_SECTION |
| HMT_MEDIUM |
| END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR) |
| |
| /* |
| * RECONCILE_IRQ_STATE without calling trace_hardirqs_off(), which |
| * would clobber syscall parameters. Also we always enter with IRQs |
| * enabled and nothing pending. system_call_exception() will call |
| * trace_hardirqs_off(). |
| * |
| * scv enters with MSR[EE]=1, so don't set PACA_IRQ_HARD_DIS. The |
| * entry vector already sets PACAIRQSOFTMASK to IRQS_ALL_DISABLED. |
| */ |
| |
| /* Calling convention has r9 = orig r0, r10 = regs */ |
| mr r9,r0 |
| bl system_call_exception |
| |
| .Lsyscall_vectored_\name\()_exit: |
| addi r4,r1,STACK_FRAME_OVERHEAD |
| li r5,1 /* scv */ |
| bl syscall_exit_prepare |
| |
| ld r2,_CCR(r1) |
| ld r4,_NIP(r1) |
| ld r5,_MSR(r1) |
| |
| BEGIN_FTR_SECTION |
| stdcx. r0,0,r1 /* to clear the reservation */ |
| END_FTR_SECTION_IFCLR(CPU_FTR_STCX_CHECKS_ADDRESS) |
| |
| BEGIN_FTR_SECTION |
| HMT_MEDIUM_LOW |
| END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR) |
| |
| cmpdi r3,0 |
| bne .Lsyscall_vectored_\name\()_restore_regs |
| |
| /* rfscv returns with LR->NIA and CTR->MSR */ |
| mtlr r4 |
| mtctr r5 |
| |
| /* Could zero these as per ABI, but we may consider a stricter ABI |
| * which preserves these if libc implementations can benefit, so |
| * restore them for now until further measurement is done. */ |
| ld r0,GPR0(r1) |
| ld r4,GPR4(r1) |
| ld r5,GPR5(r1) |
| ld r6,GPR6(r1) |
| ld r7,GPR7(r1) |
| ld r8,GPR8(r1) |
| /* Zero volatile regs that may contain sensitive kernel data */ |
| li r9,0 |
| li r10,0 |
| li r11,0 |
| li r12,0 |
| mtspr SPRN_XER,r0 |
| |
| /* |
| * We don't need to restore AMR on the way back to userspace for KUAP. |
| * The value of AMR only matters while we're in the kernel. |
| */ |
| mtcr r2 |
| ld r2,GPR2(r1) |
| ld r3,GPR3(r1) |
| ld r13,GPR13(r1) |
| ld r1,GPR1(r1) |
| RFSCV_TO_USER |
| b . /* prevent speculative execution */ |
| |
| .Lsyscall_vectored_\name\()_restore_regs: |
| li r3,0 |
| mtmsrd r3,1 |
| mtspr SPRN_SRR0,r4 |
| mtspr SPRN_SRR1,r5 |
| |
| ld r3,_CTR(r1) |
| ld r4,_LINK(r1) |
| ld r5,_XER(r1) |
| |
| REST_NVGPRS(r1) |
| ld r0,GPR0(r1) |
| mtcr r2 |
| mtctr r3 |
| mtlr r4 |
| mtspr SPRN_XER,r5 |
| REST_10GPRS(2, r1) |
| REST_2GPRS(12, r1) |
| ld r1,GPR1(r1) |
| RFI_TO_USER |
| .endm |
| |
| system_call_vectored common 0x3000 |
| /* |
| * We instantiate another entry copy for the SIGILL variant, with TRAP=0x7ff0 |
| * which is tested by system_call_exception when r0 is -1 (as set by vector |
| * entry code). |
| */ |
| system_call_vectored sigill 0x7ff0 |
| |
| |
| /* |
| * Entered via kernel return set up by kernel/sstep.c, must match entry regs |
| */ |
| .globl system_call_vectored_emulate |
| system_call_vectored_emulate: |
| _ASM_NOKPROBE_SYMBOL(system_call_vectored_emulate) |
| li r10,IRQS_ALL_DISABLED |
| stb r10,PACAIRQSOFTMASK(r13) |
| b system_call_vectored_common |
| #endif |
| |
| .balign IFETCH_ALIGN_BYTES |
| .globl system_call_common |
| system_call_common: |
| _ASM_NOKPROBE_SYMBOL(system_call_common) |
| #ifdef CONFIG_PPC_TRANSACTIONAL_MEM |
| BEGIN_FTR_SECTION |
| extrdi. r10, r12, 1, (63-MSR_TS_T_LG) /* transaction active? */ |
| bne .Ltabort_syscall |
| END_FTR_SECTION_IFSET(CPU_FTR_TM) |
| #endif |
| mr r10,r1 |
| ld r1,PACAKSAVE(r13) |
| std r10,0(r1) |
| std r11,_NIP(r1) |
| std r12,_MSR(r1) |
| std r0,GPR0(r1) |
| std r10,GPR1(r1) |
| std r2,GPR2(r1) |
| #ifdef CONFIG_PPC_FSL_BOOK3E |
| START_BTB_FLUSH_SECTION |
| BTB_FLUSH(r10) |
| END_BTB_FLUSH_SECTION |
| #endif |
| ld r2,PACATOC(r13) |
| mfcr r12 |
| li r11,0 |
| /* Can we avoid saving r3-r8 in common case? */ |
| std r3,GPR3(r1) |
| std r4,GPR4(r1) |
| std r5,GPR5(r1) |
| std r6,GPR6(r1) |
| std r7,GPR7(r1) |
| std r8,GPR8(r1) |
| /* Zero r9-r12, this should only be required when restoring all GPRs */ |
| std r11,GPR9(r1) |
| std r11,GPR10(r1) |
| std r11,GPR11(r1) |
| std r11,GPR12(r1) |
| std r9,GPR13(r1) |
| SAVE_NVGPRS(r1) |
| std r11,_XER(r1) |
| std r11,_CTR(r1) |
| mflr r10 |
| |
| /* |
| * This clears CR0.SO (bit 28), which is the error indication on |
| * return from this system call. |
| */ |
| rldimi r12,r11,28,(63-28) |
| li r11,0xc00 |
| std r10,_LINK(r1) |
| std r11,_TRAP(r1) |
| std r12,_CCR(r1) |
| std r3,ORIG_GPR3(r1) |
| addi r10,r1,STACK_FRAME_OVERHEAD |
| ld r11,exception_marker@toc(r2) |
| std r11,-16(r10) /* "regshere" marker */ |
| |
| /* |
| * RECONCILE_IRQ_STATE without calling trace_hardirqs_off(), which |
| * would clobber syscall parameters. Also we always enter with IRQs |
| * enabled and nothing pending. system_call_exception() will call |
| * trace_hardirqs_off(). |
| */ |
| li r11,IRQS_ALL_DISABLED |
| li r12,PACA_IRQ_HARD_DIS |
| stb r11,PACAIRQSOFTMASK(r13) |
| stb r12,PACAIRQHAPPENED(r13) |
| |
| /* Calling convention has r9 = orig r0, r10 = regs */ |
| mr r9,r0 |
| bl system_call_exception |
| |
| .Lsyscall_exit: |
| addi r4,r1,STACK_FRAME_OVERHEAD |
| li r5,0 /* !scv */ |
| bl syscall_exit_prepare |
| |
| ld r2,_CCR(r1) |
| ld r4,_NIP(r1) |
| ld r5,_MSR(r1) |
| ld r6,_LINK(r1) |
| |
| BEGIN_FTR_SECTION |
| stdcx. r0,0,r1 /* to clear the reservation */ |
| END_FTR_SECTION_IFCLR(CPU_FTR_STCX_CHECKS_ADDRESS) |
| |
| mtspr SPRN_SRR0,r4 |
| mtspr SPRN_SRR1,r5 |
| mtlr r6 |
| |
| cmpdi r3,0 |
| bne .Lsyscall_restore_regs |
| /* Zero volatile regs that may contain sensitive kernel data */ |
| li r0,0 |
| li r4,0 |
| li r5,0 |
| li r6,0 |
| li r7,0 |
| li r8,0 |
| li r9,0 |
| li r10,0 |
| li r11,0 |
| li r12,0 |
| mtctr r0 |
| mtspr SPRN_XER,r0 |
| .Lsyscall_restore_regs_cont: |
| |
| BEGIN_FTR_SECTION |
| HMT_MEDIUM_LOW |
| END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR) |
| |
| /* |
| * We don't need to restore AMR on the way back to userspace for KUAP. |
| * The value of AMR only matters while we're in the kernel. |
| */ |
| mtcr r2 |
| ld r2,GPR2(r1) |
| ld r3,GPR3(r1) |
| ld r13,GPR13(r1) |
| ld r1,GPR1(r1) |
| RFI_TO_USER |
| b . /* prevent speculative execution */ |
| |
| .Lsyscall_restore_regs: |
| ld r3,_CTR(r1) |
| ld r4,_XER(r1) |
| REST_NVGPRS(r1) |
| mtctr r3 |
| mtspr SPRN_XER,r4 |
| ld r0,GPR0(r1) |
| REST_8GPRS(4, r1) |
| ld r12,GPR12(r1) |
| b .Lsyscall_restore_regs_cont |
| |
| #ifdef CONFIG_PPC_TRANSACTIONAL_MEM |
| .Ltabort_syscall: |
| /* Firstly we need to enable TM in the kernel */ |
| mfmsr r10 |
| li r9, 1 |
| rldimi r10, r9, MSR_TM_LG, 63-MSR_TM_LG |
| mtmsrd r10, 0 |
| |
| /* tabort, this dooms the transaction, nothing else */ |
| li r9, (TM_CAUSE_SYSCALL|TM_CAUSE_PERSISTENT) |
| TABORT(R9) |
| |
| /* |
| * Return directly to userspace. We have corrupted user register state, |
| * but userspace will never see that register state. Execution will |
| * resume after the tbegin of the aborted transaction with the |
| * checkpointed register state. |
| */ |
| li r9, MSR_RI |
| andc r10, r10, r9 |
| mtmsrd r10, 1 |
| mtspr SPRN_SRR0, r11 |
| mtspr SPRN_SRR1, r12 |
| RFI_TO_USER |
| b . /* prevent speculative execution */ |
| #endif |
| |
| #ifdef CONFIG_PPC_BOOK3S |
| _GLOBAL(ret_from_fork_scv) |
| bl schedule_tail |
| REST_NVGPRS(r1) |
| li r3,0 /* fork() return value */ |
| b .Lsyscall_vectored_common_exit |
| #endif |
| |
| _GLOBAL(ret_from_fork) |
| bl schedule_tail |
| REST_NVGPRS(r1) |
| li r3,0 /* fork() return value */ |
| b .Lsyscall_exit |
| |
| _GLOBAL(ret_from_kernel_thread) |
| bl schedule_tail |
| REST_NVGPRS(r1) |
| mtctr r14 |
| mr r3,r15 |
| #ifdef PPC64_ELF_ABI_v2 |
| mr r12,r14 |
| #endif |
| bctrl |
| li r3,0 |
| b .Lsyscall_exit |
| |
| #ifdef CONFIG_PPC_BOOK3E |
| /* Save non-volatile GPRs, if not already saved. */ |
| _GLOBAL(save_nvgprs) |
| ld r11,_TRAP(r1) |
| andi. r0,r11,1 |
| beqlr- |
| SAVE_NVGPRS(r1) |
| clrrdi r0,r11,1 |
| std r0,_TRAP(r1) |
| blr |
| _ASM_NOKPROBE_SYMBOL(save_nvgprs); |
| #endif |
| |
| #ifdef CONFIG_PPC_BOOK3S_64 |
| |
| #define FLUSH_COUNT_CACHE \ |
| 1: nop; \ |
| patch_site 1b, patch__call_flush_branch_caches1; \ |
| 1: nop; \ |
| patch_site 1b, patch__call_flush_branch_caches2; \ |
| 1: nop; \ |
| patch_site 1b, patch__call_flush_branch_caches3 |
| |
| .macro nops number |
| .rept \number |
| nop |
| .endr |
| .endm |
| |
| .balign 32 |
| .global flush_branch_caches |
| flush_branch_caches: |
| /* Save LR into r9 */ |
| mflr r9 |
| |
| // Flush the link stack |
| .rept 64 |
| bl .+4 |
| .endr |
| b 1f |
| nops 6 |
| |
| .balign 32 |
| /* Restore LR */ |
| 1: mtlr r9 |
| |
| // If we're just flushing the link stack, return here |
| 3: nop |
| patch_site 3b patch__flush_link_stack_return |
| |
| li r9,0x7fff |
| mtctr r9 |
| |
| PPC_BCCTR_FLUSH |
| |
| 2: nop |
| patch_site 2b patch__flush_count_cache_return |
| |
| nops 3 |
| |
| .rept 278 |
| .balign 32 |
| PPC_BCCTR_FLUSH |
| nops 7 |
| .endr |
| |
| blr |
| #else |
| #define FLUSH_COUNT_CACHE |
| #endif /* CONFIG_PPC_BOOK3S_64 */ |
| |
| /* |
| * This routine switches between two different tasks. The process |
| * state of one is saved on its kernel stack. Then the state |
| * of the other is restored from its kernel stack. The memory |
| * management hardware is updated to the second process's state. |
| * Finally, we can return to the second process, via interrupt_return. |
| * On entry, r3 points to the THREAD for the current task, r4 |
| * points to the THREAD for the new task. |
| * |
| * Note: there are two ways to get to the "going out" portion |
| * of this code; either by coming in via the entry (_switch) |
| * or via "fork" which must set up an environment equivalent |
| * to the "_switch" path. If you change this you'll have to change |
| * the fork code also. |
| * |
| * The code which creates the new task context is in 'copy_thread' |
| * in arch/powerpc/kernel/process.c |
| */ |
| .align 7 |
| _GLOBAL(_switch) |
| mflr r0 |
| std r0,16(r1) |
| stdu r1,-SWITCH_FRAME_SIZE(r1) |
| /* r3-r13 are caller saved -- Cort */ |
| SAVE_NVGPRS(r1) |
| std r0,_NIP(r1) /* Return to switch caller */ |
| mfcr r23 |
| std r23,_CCR(r1) |
| std r1,KSP(r3) /* Set old stack pointer */ |
| |
| kuap_check_amr r9, r10 |
| |
| FLUSH_COUNT_CACHE /* Clobbers r9, ctr */ |
| |
| /* |
| * On SMP kernels, care must be taken because a task may be |
| * scheduled off CPUx and on to CPUy. Memory ordering must be |
| * considered. |
| * |
| * Cacheable stores on CPUx will be visible when the task is |
| * scheduled on CPUy by virtue of the core scheduler barriers |
| * (see "Notes on Program-Order guarantees on SMP systems." in |
| * kernel/sched/core.c). |
| * |
| * Uncacheable stores in the case of involuntary preemption must |
| * be taken care of. The smp_mb__after_spinlock() in __schedule() |
| * is implemented as hwsync on powerpc, which orders MMIO too. So |
| * long as there is an hwsync in the context switch path, it will |
| * be executed on the source CPU after the task has performed |
| * all MMIO ops on that CPU, and on the destination CPU before the |
| * task performs any MMIO ops there. |
| */ |
| |
| /* |
| * The kernel context switch path must contain a spin_lock, |
| * which contains larx/stcx, which will clear any reservation |
| * of the task being switched. |
| */ |
| #ifdef CONFIG_PPC_BOOK3S |
| /* Cancel all explict user streams as they will have no use after context |
| * switch and will stop the HW from creating streams itself |
| */ |
| DCBT_BOOK3S_STOP_ALL_STREAM_IDS(r6) |
| #endif |
| |
| addi r6,r4,-THREAD /* Convert THREAD to 'current' */ |
| std r6,PACACURRENT(r13) /* Set new 'current' */ |
| #if defined(CONFIG_STACKPROTECTOR) |
| ld r6, TASK_CANARY(r6) |
| std r6, PACA_CANARY(r13) |
| #endif |
| |
| ld r8,KSP(r4) /* new stack pointer */ |
| #ifdef CONFIG_PPC_BOOK3S_64 |
| BEGIN_MMU_FTR_SECTION |
| b 2f |
| END_MMU_FTR_SECTION_IFSET(MMU_FTR_TYPE_RADIX) |
| BEGIN_FTR_SECTION |
| clrrdi r6,r8,28 /* get its ESID */ |
| clrrdi r9,r1,28 /* get current sp ESID */ |
| FTR_SECTION_ELSE |
| clrrdi r6,r8,40 /* get its 1T ESID */ |
| clrrdi r9,r1,40 /* get current sp 1T ESID */ |
| ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_1T_SEGMENT) |
| clrldi. r0,r6,2 /* is new ESID c00000000? */ |
| cmpd cr1,r6,r9 /* or is new ESID the same as current ESID? */ |
| cror eq,4*cr1+eq,eq |
| beq 2f /* if yes, don't slbie it */ |
| |
| /* Bolt in the new stack SLB entry */ |
| ld r7,KSP_VSID(r4) /* Get new stack's VSID */ |
| oris r0,r6,(SLB_ESID_V)@h |
| ori r0,r0,(SLB_NUM_BOLTED-1)@l |
| BEGIN_FTR_SECTION |
| li r9,MMU_SEGSIZE_1T /* insert B field */ |
| oris r6,r6,(MMU_SEGSIZE_1T << SLBIE_SSIZE_SHIFT)@h |
| rldimi r7,r9,SLB_VSID_SSIZE_SHIFT,0 |
| END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT) |
| |
| /* Update the last bolted SLB. No write barriers are needed |
| * here, provided we only update the current CPU's SLB shadow |
| * buffer. |
| */ |
| ld r9,PACA_SLBSHADOWPTR(r13) |
| li r12,0 |
| std r12,SLBSHADOW_STACKESID(r9) /* Clear ESID */ |
| li r12,SLBSHADOW_STACKVSID |
| STDX_BE r7,r12,r9 /* Save VSID */ |
| li r12,SLBSHADOW_STACKESID |
| STDX_BE r0,r12,r9 /* Save ESID */ |
| |
| /* No need to check for MMU_FTR_NO_SLBIE_B here, since when |
| * we have 1TB segments, the only CPUs known to have the errata |
| * only support less than 1TB of system memory and we'll never |
| * actually hit this code path. |
| */ |
| |
| isync |
| slbie r6 |
| BEGIN_FTR_SECTION |
| slbie r6 /* Workaround POWER5 < DD2.1 issue */ |
| END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_207S) |
| slbmte r7,r0 |
| isync |
| 2: |
| #endif /* CONFIG_PPC_BOOK3S_64 */ |
| |
| clrrdi r7, r8, THREAD_SHIFT /* base of new stack */ |
| /* Note: this uses SWITCH_FRAME_SIZE rather than INT_FRAME_SIZE |
| because we don't need to leave the 288-byte ABI gap at the |
| top of the kernel stack. */ |
| addi r7,r7,THREAD_SIZE-SWITCH_FRAME_SIZE |
| |
| /* |
| * PMU interrupts in radix may come in here. They will use r1, not |
| * PACAKSAVE, so this stack switch will not cause a problem. They |
| * will store to the process stack, which may then be migrated to |
| * another CPU. However the rq lock release on this CPU paired with |
| * the rq lock acquire on the new CPU before the stack becomes |
| * active on the new CPU, will order those stores. |
| */ |
| mr r1,r8 /* start using new stack pointer */ |
| std r7,PACAKSAVE(r13) |
| |
| ld r6,_CCR(r1) |
| mtcrf 0xFF,r6 |
| |
| /* r3-r13 are destroyed -- Cort */ |
| REST_NVGPRS(r1) |
| |
| /* convert old thread to its task_struct for return value */ |
| addi r3,r3,-THREAD |
| ld r7,_NIP(r1) /* Return to _switch caller in new task */ |
| mtlr r7 |
| addi r1,r1,SWITCH_FRAME_SIZE |
| blr |
| |
| #ifdef CONFIG_PPC_BOOK3S |
| /* |
| * If MSR EE/RI was never enabled, IRQs not reconciled, NVGPRs not |
| * touched, no exit work created, then this can be used. |
| */ |
| .balign IFETCH_ALIGN_BYTES |
| .globl fast_interrupt_return |
| fast_interrupt_return: |
| _ASM_NOKPROBE_SYMBOL(fast_interrupt_return) |
| kuap_check_amr r3, r4 |
| ld r5,_MSR(r1) |
| andi. r0,r5,MSR_PR |
| bne .Lfast_user_interrupt_return |
| kuap_restore_amr r3, r4 |
| andi. r0,r5,MSR_RI |
| li r3,0 /* 0 return value, no EMULATE_STACK_STORE */ |
| bne+ .Lfast_kernel_interrupt_return |
| addi r3,r1,STACK_FRAME_OVERHEAD |
| bl unrecoverable_exception |
| b . /* should not get here */ |
| |
| .balign IFETCH_ALIGN_BYTES |
| .globl interrupt_return |
| interrupt_return: |
| _ASM_NOKPROBE_SYMBOL(interrupt_return) |
| ld r4,_MSR(r1) |
| andi. r0,r4,MSR_PR |
| beq .Lkernel_interrupt_return |
| addi r3,r1,STACK_FRAME_OVERHEAD |
| bl interrupt_exit_user_prepare |
| cmpdi r3,0 |
| bne- .Lrestore_nvgprs |
| |
| .Lfast_user_interrupt_return: |
| ld r11,_NIP(r1) |
| ld r12,_MSR(r1) |
| BEGIN_FTR_SECTION |
| ld r10,_PPR(r1) |
| mtspr SPRN_PPR,r10 |
| END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR) |
| mtspr SPRN_SRR0,r11 |
| mtspr SPRN_SRR1,r12 |
| |
| BEGIN_FTR_SECTION |
| stdcx. r0,0,r1 /* to clear the reservation */ |
| FTR_SECTION_ELSE |
| ldarx r0,0,r1 |
| ALT_FTR_SECTION_END_IFCLR(CPU_FTR_STCX_CHECKS_ADDRESS) |
| |
| ld r3,_CCR(r1) |
| ld r4,_LINK(r1) |
| ld r5,_CTR(r1) |
| ld r6,_XER(r1) |
| li r0,0 |
| |
| REST_4GPRS(7, r1) |
| REST_2GPRS(11, r1) |
| REST_GPR(13, r1) |
| |
| mtcr r3 |
| mtlr r4 |
| mtctr r5 |
| mtspr SPRN_XER,r6 |
| |
| REST_4GPRS(2, r1) |
| REST_GPR(6, r1) |
| REST_GPR(0, r1) |
| REST_GPR(1, r1) |
| RFI_TO_USER |
| b . /* prevent speculative execution */ |
| |
| .Lrestore_nvgprs: |
| REST_NVGPRS(r1) |
| b .Lfast_user_interrupt_return |
| |
| .balign IFETCH_ALIGN_BYTES |
| .Lkernel_interrupt_return: |
| addi r3,r1,STACK_FRAME_OVERHEAD |
| bl interrupt_exit_kernel_prepare |
| |
| .Lfast_kernel_interrupt_return: |
| cmpdi cr1,r3,0 |
| ld r11,_NIP(r1) |
| ld r12,_MSR(r1) |
| mtspr SPRN_SRR0,r11 |
| mtspr SPRN_SRR1,r12 |
| |
| BEGIN_FTR_SECTION |
| stdcx. r0,0,r1 /* to clear the reservation */ |
| FTR_SECTION_ELSE |
| ldarx r0,0,r1 |
| ALT_FTR_SECTION_END_IFCLR(CPU_FTR_STCX_CHECKS_ADDRESS) |
| |
| ld r3,_LINK(r1) |
| ld r4,_CTR(r1) |
| ld r5,_XER(r1) |
| ld r6,_CCR(r1) |
| li r0,0 |
| |
| REST_4GPRS(7, r1) |
| REST_2GPRS(11, r1) |
| |
| mtlr r3 |
| mtctr r4 |
| mtspr SPRN_XER,r5 |
| |
| /* |
| * Leaving a stale exception_marker on the stack can confuse |
| * the reliable stack unwinder later on. Clear it. |
| */ |
| std r0,STACK_FRAME_OVERHEAD-16(r1) |
| |
| REST_4GPRS(2, r1) |
| |
| bne- cr1,1f /* emulate stack store */ |
| mtcr r6 |
| REST_GPR(6, r1) |
| REST_GPR(0, r1) |
| REST_GPR(1, r1) |
| RFI_TO_KERNEL |
| b . /* prevent speculative execution */ |
| |
| 1: /* |
| * Emulate stack store with update. New r1 value was already calculated |
| * and updated in our interrupt regs by emulate_loadstore, but we can't |
| * store the previous value of r1 to the stack before re-loading our |
| * registers from it, otherwise they could be clobbered. Use |
| * PACA_EXGEN as temporary storage to hold the store data, as |
| * interrupts are disabled here so it won't be clobbered. |
| */ |
| mtcr r6 |
| std r9,PACA_EXGEN+0(r13) |
| addi r9,r1,INT_FRAME_SIZE /* get original r1 */ |
| REST_GPR(6, r1) |
| REST_GPR(0, r1) |
| REST_GPR(1, r1) |
| std r9,0(r1) /* perform store component of stdu */ |
| ld r9,PACA_EXGEN+0(r13) |
| |
| RFI_TO_KERNEL |
| b . /* prevent speculative execution */ |
| #endif /* CONFIG_PPC_BOOK3S */ |
| |
| #ifdef CONFIG_PPC_RTAS |
| /* |
| * On CHRP, the Run-Time Abstraction Services (RTAS) have to be |
| * called with the MMU off. |
| * |
| * In addition, we need to be in 32b mode, at least for now. |
| * |
| * Note: r3 is an input parameter to rtas, so don't trash it... |
| */ |
| _GLOBAL(enter_rtas) |
| mflr r0 |
| std r0,16(r1) |
| stdu r1,-SWITCH_FRAME_SIZE(r1) /* Save SP and create stack space. */ |
| |
| /* Because RTAS is running in 32b mode, it clobbers the high order half |
| * of all registers that it saves. We therefore save those registers |
| * RTAS might touch to the stack. (r0, r3-r13 are caller saved) |
| */ |
| SAVE_GPR(2, r1) /* Save the TOC */ |
| SAVE_GPR(13, r1) /* Save paca */ |
| SAVE_NVGPRS(r1) /* Save the non-volatiles */ |
| |
| mfcr r4 |
| std r4,_CCR(r1) |
| mfctr r5 |
| std r5,_CTR(r1) |
| mfspr r6,SPRN_XER |
| std r6,_XER(r1) |
| mfdar r7 |
| std r7,_DAR(r1) |
| mfdsisr r8 |
| std r8,_DSISR(r1) |
| |
| /* Temporary workaround to clear CR until RTAS can be modified to |
| * ignore all bits. |
| */ |
| li r0,0 |
| mtcr r0 |
| |
| #ifdef CONFIG_BUG |
| /* There is no way it is acceptable to get here with interrupts enabled, |
| * check it with the asm equivalent of WARN_ON |
| */ |
| lbz r0,PACAIRQSOFTMASK(r13) |
| 1: tdeqi r0,IRQS_ENABLED |
| EMIT_BUG_ENTRY 1b,__FILE__,__LINE__,BUGFLAG_WARNING |
| #endif |
| |
| /* Hard-disable interrupts */ |
| mfmsr r6 |
| rldicl r7,r6,48,1 |
| rotldi r7,r7,16 |
| mtmsrd r7,1 |
| |
| /* Unfortunately, the stack pointer and the MSR are also clobbered, |
| * so they are saved in the PACA which allows us to restore |
| * our original state after RTAS returns. |
| */ |
| std r1,PACAR1(r13) |
| std r6,PACASAVEDMSR(r13) |
| |
| /* Setup our real return addr */ |
| LOAD_REG_ADDR(r4,rtas_return_loc) |
| clrldi r4,r4,2 /* convert to realmode address */ |
| mtlr r4 |
| |
| li r0,0 |
| ori r0,r0,MSR_EE|MSR_SE|MSR_BE|MSR_RI |
| andc r0,r6,r0 |
| |
| li r9,1 |
| rldicr r9,r9,MSR_SF_LG,(63-MSR_SF_LG) |
| ori r9,r9,MSR_IR|MSR_DR|MSR_FE0|MSR_FE1|MSR_FP|MSR_RI|MSR_LE |
| andc r6,r0,r9 |
| |
| __enter_rtas: |
| sync /* disable interrupts so SRR0/1 */ |
| mtmsrd r0 /* don't get trashed */ |
| |
| LOAD_REG_ADDR(r4, rtas) |
| ld r5,RTASENTRY(r4) /* get the rtas->entry value */ |
| ld r4,RTASBASE(r4) /* get the rtas->base value */ |
| |
| mtspr SPRN_SRR0,r5 |
| mtspr SPRN_SRR1,r6 |
| RFI_TO_KERNEL |
| b . /* prevent speculative execution */ |
| |
| rtas_return_loc: |
| FIXUP_ENDIAN |
| |
| /* |
| * Clear RI and set SF before anything. |
| */ |
| mfmsr r6 |
| li r0,MSR_RI |
| andc r6,r6,r0 |
| sldi r0,r0,(MSR_SF_LG - MSR_RI_LG) |
| or r6,r6,r0 |
| sync |
| mtmsrd r6 |
| |
| /* relocation is off at this point */ |
| GET_PACA(r4) |
| clrldi r4,r4,2 /* convert to realmode address */ |
| |
| bcl 20,31,$+4 |
| 0: mflr r3 |
| ld r3,(1f-0b)(r3) /* get &rtas_restore_regs */ |
| |
| ld r1,PACAR1(r4) /* Restore our SP */ |
| ld r4,PACASAVEDMSR(r4) /* Restore our MSR */ |
| |
| mtspr SPRN_SRR0,r3 |
| mtspr SPRN_SRR1,r4 |
| RFI_TO_KERNEL |
| b . /* prevent speculative execution */ |
| _ASM_NOKPROBE_SYMBOL(__enter_rtas) |
| _ASM_NOKPROBE_SYMBOL(rtas_return_loc) |
| |
| .align 3 |
| 1: .8byte rtas_restore_regs |
| |
| rtas_restore_regs: |
| /* relocation is on at this point */ |
| REST_GPR(2, r1) /* Restore the TOC */ |
| REST_GPR(13, r1) /* Restore paca */ |
| REST_NVGPRS(r1) /* Restore the non-volatiles */ |
| |
| GET_PACA(r13) |
| |
| ld r4,_CCR(r1) |
| mtcr r4 |
| ld r5,_CTR(r1) |
| mtctr r5 |
| ld r6,_XER(r1) |
| mtspr SPRN_XER,r6 |
| ld r7,_DAR(r1) |
| mtdar r7 |
| ld r8,_DSISR(r1) |
| mtdsisr r8 |
| |
| addi r1,r1,SWITCH_FRAME_SIZE /* Unstack our frame */ |
| ld r0,16(r1) /* get return address */ |
| |
| mtlr r0 |
| blr /* return to caller */ |
| |
| #endif /* CONFIG_PPC_RTAS */ |
| |
| _GLOBAL(enter_prom) |
| mflr r0 |
| std r0,16(r1) |
| stdu r1,-SWITCH_FRAME_SIZE(r1) /* Save SP and create stack space */ |
| |
| /* Because PROM is running in 32b mode, it clobbers the high order half |
| * of all registers that it saves. We therefore save those registers |
| * PROM might touch to the stack. (r0, r3-r13 are caller saved) |
| */ |
| SAVE_GPR(2, r1) |
| SAVE_GPR(13, r1) |
| SAVE_NVGPRS(r1) |
| mfcr r10 |
| mfmsr r11 |
| std r10,_CCR(r1) |
| std r11,_MSR(r1) |
| |
| /* Put PROM address in SRR0 */ |
| mtsrr0 r4 |
| |
| /* Setup our trampoline return addr in LR */ |
| bcl 20,31,$+4 |
| 0: mflr r4 |
| addi r4,r4,(1f - 0b) |
| mtlr r4 |
| |
| /* Prepare a 32-bit mode big endian MSR |
| */ |
| #ifdef CONFIG_PPC_BOOK3E |
| rlwinm r11,r11,0,1,31 |
| mtsrr1 r11 |
| rfi |
| #else /* CONFIG_PPC_BOOK3E */ |
| LOAD_REG_IMMEDIATE(r12, MSR_SF | MSR_ISF | MSR_LE) |
| andc r11,r11,r12 |
| mtsrr1 r11 |
| RFI_TO_KERNEL |
| #endif /* CONFIG_PPC_BOOK3E */ |
| |
| 1: /* Return from OF */ |
| FIXUP_ENDIAN |
| |
| /* Just make sure that r1 top 32 bits didn't get |
| * corrupt by OF |
| */ |
| rldicl r1,r1,0,32 |
| |
| /* Restore the MSR (back to 64 bits) */ |
| ld r0,_MSR(r1) |
| MTMSRD(r0) |
| isync |
| |
| /* Restore other registers */ |
| REST_GPR(2, r1) |
| REST_GPR(13, r1) |
| REST_NVGPRS(r1) |
| ld r4,_CCR(r1) |
| mtcr r4 |
| |
| addi r1,r1,SWITCH_FRAME_SIZE |
| ld r0,16(r1) |
| mtlr r0 |
| blr |