| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * x86 FPU boot time init code: |
| */ |
| #include <asm/fpu/internal.h> |
| #include <asm/tlbflush.h> |
| #include <asm/setup.h> |
| |
| #include <linux/sched.h> |
| #include <linux/sched/task.h> |
| #include <linux/init.h> |
| |
| /* |
| * Initialize the registers found in all CPUs, CR0 and CR4: |
| */ |
| static void fpu__init_cpu_generic(void) |
| { |
| unsigned long cr0; |
| unsigned long cr4_mask = 0; |
| |
| if (boot_cpu_has(X86_FEATURE_FXSR)) |
| cr4_mask |= X86_CR4_OSFXSR; |
| if (boot_cpu_has(X86_FEATURE_XMM)) |
| cr4_mask |= X86_CR4_OSXMMEXCPT; |
| if (cr4_mask) |
| cr4_set_bits(cr4_mask); |
| |
| cr0 = read_cr0(); |
| cr0 &= ~(X86_CR0_TS|X86_CR0_EM); /* clear TS and EM */ |
| if (!boot_cpu_has(X86_FEATURE_FPU)) |
| cr0 |= X86_CR0_EM; |
| write_cr0(cr0); |
| |
| /* Flush out any pending x87 state: */ |
| #ifdef CONFIG_MATH_EMULATION |
| if (!boot_cpu_has(X86_FEATURE_FPU)) |
| fpstate_init_soft(¤t->thread.fpu.state.soft); |
| else |
| #endif |
| asm volatile ("fninit"); |
| } |
| |
| /* |
| * Enable all supported FPU features. Called when a CPU is brought online: |
| */ |
| void fpu__init_cpu(void) |
| { |
| fpu__init_cpu_generic(); |
| fpu__init_cpu_xstate(); |
| } |
| |
| static bool fpu__probe_without_cpuid(void) |
| { |
| unsigned long cr0; |
| u16 fsw, fcw; |
| |
| fsw = fcw = 0xffff; |
| |
| cr0 = read_cr0(); |
| cr0 &= ~(X86_CR0_TS | X86_CR0_EM); |
| write_cr0(cr0); |
| |
| asm volatile("fninit ; fnstsw %0 ; fnstcw %1" : "+m" (fsw), "+m" (fcw)); |
| |
| pr_info("x86/fpu: Probing for FPU: FSW=0x%04hx FCW=0x%04hx\n", fsw, fcw); |
| |
| return fsw == 0 && (fcw & 0x103f) == 0x003f; |
| } |
| |
| static void fpu__init_system_early_generic(struct cpuinfo_x86 *c) |
| { |
| if (!boot_cpu_has(X86_FEATURE_CPUID) && |
| !test_bit(X86_FEATURE_FPU, (unsigned long *)cpu_caps_cleared)) { |
| if (fpu__probe_without_cpuid()) |
| setup_force_cpu_cap(X86_FEATURE_FPU); |
| else |
| setup_clear_cpu_cap(X86_FEATURE_FPU); |
| } |
| |
| #ifndef CONFIG_MATH_EMULATION |
| if (!test_cpu_cap(&boot_cpu_data, X86_FEATURE_FPU)) { |
| pr_emerg("x86/fpu: Giving up, no FPU found and no math emulation present\n"); |
| for (;;) |
| asm volatile("hlt"); |
| } |
| #endif |
| } |
| |
| /* |
| * Boot time FPU feature detection code: |
| */ |
| unsigned int mxcsr_feature_mask __read_mostly = 0xffffffffu; |
| EXPORT_SYMBOL_GPL(mxcsr_feature_mask); |
| |
| static void __init fpu__init_system_mxcsr(void) |
| { |
| unsigned int mask = 0; |
| |
| if (boot_cpu_has(X86_FEATURE_FXSR)) { |
| /* Static because GCC does not get 16-byte stack alignment right: */ |
| static struct fxregs_state fxregs __initdata; |
| |
| asm volatile("fxsave %0" : "+m" (fxregs)); |
| |
| mask = fxregs.mxcsr_mask; |
| |
| /* |
| * If zero then use the default features mask, |
| * which has all features set, except the |
| * denormals-are-zero feature bit: |
| */ |
| if (mask == 0) |
| mask = 0x0000ffbf; |
| } |
| mxcsr_feature_mask &= mask; |
| } |
| |
| /* |
| * Once per bootup FPU initialization sequences that will run on most x86 CPUs: |
| */ |
| static void __init fpu__init_system_generic(void) |
| { |
| /* |
| * Set up the legacy init FPU context. (xstate init might overwrite this |
| * with a more modern format, if the CPU supports it.) |
| */ |
| fpstate_init(&init_fpstate); |
| |
| fpu__init_system_mxcsr(); |
| } |
| |
| /* |
| * Size of the FPU context state. All tasks in the system use the |
| * same context size, regardless of what portion they use. |
| * This is inherent to the XSAVE architecture which puts all state |
| * components into a single, continuous memory block: |
| */ |
| unsigned int fpu_kernel_xstate_size; |
| EXPORT_SYMBOL_GPL(fpu_kernel_xstate_size); |
| |
| /* Get alignment of the TYPE. */ |
| #define TYPE_ALIGN(TYPE) offsetof(struct { char x; TYPE test; }, test) |
| |
| /* |
| * Enforce that 'MEMBER' is the last field of 'TYPE'. |
| * |
| * Align the computed size with alignment of the TYPE, |
| * because that's how C aligns structs. |
| */ |
| #define CHECK_MEMBER_AT_END_OF(TYPE, MEMBER) \ |
| BUILD_BUG_ON(sizeof(TYPE) != ALIGN(offsetofend(TYPE, MEMBER), \ |
| TYPE_ALIGN(TYPE))) |
| |
| /* |
| * We append the 'struct fpu' to the task_struct: |
| */ |
| static void __init fpu__init_task_struct_size(void) |
| { |
| int task_size = sizeof(struct task_struct); |
| |
| /* |
| * Subtract off the static size of the register state. |
| * It potentially has a bunch of padding. |
| */ |
| task_size -= sizeof(((struct task_struct *)0)->thread.fpu.state); |
| |
| /* |
| * Add back the dynamically-calculated register state |
| * size. |
| */ |
| task_size += fpu_kernel_xstate_size; |
| |
| /* |
| * We dynamically size 'struct fpu', so we require that |
| * it be at the end of 'thread_struct' and that |
| * 'thread_struct' be at the end of 'task_struct'. If |
| * you hit a compile error here, check the structure to |
| * see if something got added to the end. |
| */ |
| CHECK_MEMBER_AT_END_OF(struct fpu, state); |
| CHECK_MEMBER_AT_END_OF(struct thread_struct, fpu); |
| CHECK_MEMBER_AT_END_OF(struct task_struct, thread); |
| |
| arch_task_struct_size = task_size; |
| } |
| |
| /* |
| * Set up the user and kernel xstate sizes based on the legacy FPU context size. |
| * |
| * We set this up first, and later it will be overwritten by |
| * fpu__init_system_xstate() if the CPU knows about xstates. |
| */ |
| static void __init fpu__init_system_xstate_size_legacy(void) |
| { |
| static int on_boot_cpu __initdata = 1; |
| |
| WARN_ON_FPU(!on_boot_cpu); |
| on_boot_cpu = 0; |
| |
| /* |
| * Note that xstate sizes might be overwritten later during |
| * fpu__init_system_xstate(). |
| */ |
| |
| if (!boot_cpu_has(X86_FEATURE_FPU)) { |
| fpu_kernel_xstate_size = sizeof(struct swregs_state); |
| } else { |
| if (boot_cpu_has(X86_FEATURE_FXSR)) |
| fpu_kernel_xstate_size = |
| sizeof(struct fxregs_state); |
| else |
| fpu_kernel_xstate_size = |
| sizeof(struct fregs_state); |
| } |
| |
| fpu_user_xstate_size = fpu_kernel_xstate_size; |
| } |
| |
| /* |
| * Find supported xfeatures based on cpu features and command-line input. |
| * This must be called after fpu__init_parse_early_param() is called and |
| * xfeatures_mask is enumerated. |
| */ |
| u64 __init fpu__get_supported_xfeatures_mask(void) |
| { |
| return XFEATURE_MASK_USER_SUPPORTED | |
| XFEATURE_MASK_SUPERVISOR_SUPPORTED; |
| } |
| |
| /* Legacy code to initialize eager fpu mode. */ |
| static void __init fpu__init_system_ctx_switch(void) |
| { |
| static bool on_boot_cpu __initdata = 1; |
| |
| WARN_ON_FPU(!on_boot_cpu); |
| on_boot_cpu = 0; |
| } |
| |
| /* |
| * Called on the boot CPU once per system bootup, to set up the initial |
| * FPU state that is later cloned into all processes: |
| */ |
| void __init fpu__init_system(struct cpuinfo_x86 *c) |
| { |
| fpu__init_system_early_generic(c); |
| |
| /* |
| * The FPU has to be operational for some of the |
| * later FPU init activities: |
| */ |
| fpu__init_cpu(); |
| |
| fpu__init_system_generic(); |
| fpu__init_system_xstate_size_legacy(); |
| fpu__init_system_xstate(); |
| fpu__init_task_struct_size(); |
| |
| fpu__init_system_ctx_switch(); |
| } |