| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Copyright 2017 IBM Corporation |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/mfd/syscon.h> |
| #include <linux/miscdevice.h> |
| #include <linux/mm.h> |
| #include <linux/module.h> |
| #include <linux/of_address.h> |
| #include <linux/platform_device.h> |
| #include <linux/poll.h> |
| #include <linux/regmap.h> |
| |
| #include <linux/aspeed-lpc-ctrl.h> |
| |
| #define DEVICE_NAME "aspeed-lpc-ctrl" |
| |
| #define HICR5 0x0 |
| #define HICR5_ENL2H BIT(8) |
| #define HICR5_ENFWH BIT(10) |
| |
| #define HICR7 0x8 |
| #define HICR8 0xc |
| |
| struct aspeed_lpc_ctrl { |
| struct miscdevice miscdev; |
| struct regmap *regmap; |
| struct clk *clk; |
| phys_addr_t mem_base; |
| resource_size_t mem_size; |
| u32 pnor_size; |
| u32 pnor_base; |
| }; |
| |
| static struct aspeed_lpc_ctrl *file_aspeed_lpc_ctrl(struct file *file) |
| { |
| return container_of(file->private_data, struct aspeed_lpc_ctrl, |
| miscdev); |
| } |
| |
| static int aspeed_lpc_ctrl_mmap(struct file *file, struct vm_area_struct *vma) |
| { |
| struct aspeed_lpc_ctrl *lpc_ctrl = file_aspeed_lpc_ctrl(file); |
| unsigned long vsize = vma->vm_end - vma->vm_start; |
| pgprot_t prot = vma->vm_page_prot; |
| |
| if (vma->vm_pgoff + vma_pages(vma) > lpc_ctrl->mem_size >> PAGE_SHIFT) |
| return -EINVAL; |
| |
| /* ast2400/2500 AHB accesses are not cache coherent */ |
| prot = pgprot_noncached(prot); |
| |
| if (remap_pfn_range(vma, vma->vm_start, |
| (lpc_ctrl->mem_base >> PAGE_SHIFT) + vma->vm_pgoff, |
| vsize, prot)) |
| return -EAGAIN; |
| |
| return 0; |
| } |
| |
| static long aspeed_lpc_ctrl_ioctl(struct file *file, unsigned int cmd, |
| unsigned long param) |
| { |
| struct aspeed_lpc_ctrl *lpc_ctrl = file_aspeed_lpc_ctrl(file); |
| struct device *dev = file->private_data; |
| void __user *p = (void __user *)param; |
| struct aspeed_lpc_ctrl_mapping map; |
| u32 addr; |
| u32 size; |
| long rc; |
| |
| if (copy_from_user(&map, p, sizeof(map))) |
| return -EFAULT; |
| |
| if (map.flags != 0) |
| return -EINVAL; |
| |
| switch (cmd) { |
| case ASPEED_LPC_CTRL_IOCTL_GET_SIZE: |
| /* The flash windows don't report their size */ |
| if (map.window_type != ASPEED_LPC_CTRL_WINDOW_MEMORY) |
| return -EINVAL; |
| |
| /* Support more than one window id in the future */ |
| if (map.window_id != 0) |
| return -EINVAL; |
| |
| /* If memory-region is not described in device tree */ |
| if (!lpc_ctrl->mem_size) { |
| dev_dbg(dev, "Didn't find reserved memory\n"); |
| return -ENXIO; |
| } |
| |
| map.size = lpc_ctrl->mem_size; |
| |
| return copy_to_user(p, &map, sizeof(map)) ? -EFAULT : 0; |
| case ASPEED_LPC_CTRL_IOCTL_MAP: |
| |
| /* |
| * The top half of HICR7 is the MSB of the BMC address of the |
| * mapping. |
| * The bottom half of HICR7 is the MSB of the HOST LPC |
| * firmware space address of the mapping. |
| * |
| * The 1 bits in the top of half of HICR8 represent the bits |
| * (in the requested address) that should be ignored and |
| * replaced with those from the top half of HICR7. |
| * The 1 bits in the bottom half of HICR8 represent the bits |
| * (in the requested address) that should be kept and pass |
| * into the BMC address space. |
| */ |
| |
| /* |
| * It doesn't make sense to talk about a size or offset with |
| * low 16 bits set. Both HICR7 and HICR8 talk about the top 16 |
| * bits of addresses and sizes. |
| */ |
| |
| if ((map.size & 0x0000ffff) || (map.offset & 0x0000ffff)) |
| return -EINVAL; |
| |
| /* |
| * Because of the way the masks work in HICR8 offset has to |
| * be a multiple of size. |
| */ |
| if (map.offset & (map.size - 1)) |
| return -EINVAL; |
| |
| if (map.window_type == ASPEED_LPC_CTRL_WINDOW_FLASH) { |
| if (!lpc_ctrl->pnor_size) { |
| dev_dbg(dev, "Didn't find host pnor flash\n"); |
| return -ENXIO; |
| } |
| addr = lpc_ctrl->pnor_base; |
| size = lpc_ctrl->pnor_size; |
| } else if (map.window_type == ASPEED_LPC_CTRL_WINDOW_MEMORY) { |
| /* If memory-region is not described in device tree */ |
| if (!lpc_ctrl->mem_size) { |
| dev_dbg(dev, "Didn't find reserved memory\n"); |
| return -ENXIO; |
| } |
| addr = lpc_ctrl->mem_base; |
| size = lpc_ctrl->mem_size; |
| } else { |
| return -EINVAL; |
| } |
| |
| /* Check overflow first! */ |
| if (map.offset + map.size < map.offset || |
| map.offset + map.size > size) |
| return -EINVAL; |
| |
| if (map.size == 0 || map.size > size) |
| return -EINVAL; |
| |
| addr += map.offset; |
| |
| /* |
| * addr (host lpc address) is safe regardless of values. This |
| * simply changes the address the host has to request on its |
| * side of the LPC bus. This cannot impact the hosts own |
| * memory space by surprise as LPC specific accessors are |
| * required. The only strange thing that could be done is |
| * setting the lower 16 bits but the shift takes care of that. |
| */ |
| |
| rc = regmap_write(lpc_ctrl->regmap, HICR7, |
| (addr | (map.addr >> 16))); |
| if (rc) |
| return rc; |
| |
| rc = regmap_write(lpc_ctrl->regmap, HICR8, |
| (~(map.size - 1)) | ((map.size >> 16) - 1)); |
| if (rc) |
| return rc; |
| |
| /* |
| * Enable LPC FHW cycles. This is required for the host to |
| * access the regions specified. |
| */ |
| return regmap_update_bits(lpc_ctrl->regmap, HICR5, |
| HICR5_ENFWH | HICR5_ENL2H, |
| HICR5_ENFWH | HICR5_ENL2H); |
| } |
| |
| return -EINVAL; |
| } |
| |
| static const struct file_operations aspeed_lpc_ctrl_fops = { |
| .owner = THIS_MODULE, |
| .mmap = aspeed_lpc_ctrl_mmap, |
| .unlocked_ioctl = aspeed_lpc_ctrl_ioctl, |
| }; |
| |
| static int aspeed_lpc_ctrl_probe(struct platform_device *pdev) |
| { |
| struct aspeed_lpc_ctrl *lpc_ctrl; |
| struct device_node *node; |
| struct resource resm; |
| struct device *dev; |
| int rc; |
| |
| dev = &pdev->dev; |
| |
| lpc_ctrl = devm_kzalloc(dev, sizeof(*lpc_ctrl), GFP_KERNEL); |
| if (!lpc_ctrl) |
| return -ENOMEM; |
| |
| /* If flash is described in device tree then store */ |
| node = of_parse_phandle(dev->of_node, "flash", 0); |
| if (!node) { |
| dev_dbg(dev, "Didn't find host pnor flash node\n"); |
| } else { |
| rc = of_address_to_resource(node, 1, &resm); |
| of_node_put(node); |
| if (rc) { |
| dev_err(dev, "Couldn't address to resource for flash\n"); |
| return rc; |
| } |
| |
| lpc_ctrl->pnor_size = resource_size(&resm); |
| lpc_ctrl->pnor_base = resm.start; |
| } |
| |
| |
| dev_set_drvdata(&pdev->dev, lpc_ctrl); |
| |
| /* If memory-region is described in device tree then store */ |
| node = of_parse_phandle(dev->of_node, "memory-region", 0); |
| if (!node) { |
| dev_dbg(dev, "Didn't find reserved memory\n"); |
| } else { |
| rc = of_address_to_resource(node, 0, &resm); |
| of_node_put(node); |
| if (rc) { |
| dev_err(dev, "Couldn't address to resource for reserved memory\n"); |
| return -ENXIO; |
| } |
| |
| lpc_ctrl->mem_size = resource_size(&resm); |
| lpc_ctrl->mem_base = resm.start; |
| } |
| |
| lpc_ctrl->regmap = syscon_node_to_regmap( |
| pdev->dev.parent->of_node); |
| if (IS_ERR(lpc_ctrl->regmap)) { |
| dev_err(dev, "Couldn't get regmap\n"); |
| return -ENODEV; |
| } |
| |
| lpc_ctrl->clk = devm_clk_get(dev, NULL); |
| if (IS_ERR(lpc_ctrl->clk)) { |
| dev_err(dev, "couldn't get clock\n"); |
| return PTR_ERR(lpc_ctrl->clk); |
| } |
| rc = clk_prepare_enable(lpc_ctrl->clk); |
| if (rc) { |
| dev_err(dev, "couldn't enable clock\n"); |
| return rc; |
| } |
| |
| lpc_ctrl->miscdev.minor = MISC_DYNAMIC_MINOR; |
| lpc_ctrl->miscdev.name = DEVICE_NAME; |
| lpc_ctrl->miscdev.fops = &aspeed_lpc_ctrl_fops; |
| lpc_ctrl->miscdev.parent = dev; |
| rc = misc_register(&lpc_ctrl->miscdev); |
| if (rc) { |
| dev_err(dev, "Unable to register device\n"); |
| goto err; |
| } |
| |
| return 0; |
| |
| err: |
| clk_disable_unprepare(lpc_ctrl->clk); |
| return rc; |
| } |
| |
| static int aspeed_lpc_ctrl_remove(struct platform_device *pdev) |
| { |
| struct aspeed_lpc_ctrl *lpc_ctrl = dev_get_drvdata(&pdev->dev); |
| |
| misc_deregister(&lpc_ctrl->miscdev); |
| clk_disable_unprepare(lpc_ctrl->clk); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id aspeed_lpc_ctrl_match[] = { |
| { .compatible = "aspeed,ast2400-lpc-ctrl" }, |
| { .compatible = "aspeed,ast2500-lpc-ctrl" }, |
| { }, |
| }; |
| |
| static struct platform_driver aspeed_lpc_ctrl_driver = { |
| .driver = { |
| .name = DEVICE_NAME, |
| .of_match_table = aspeed_lpc_ctrl_match, |
| }, |
| .probe = aspeed_lpc_ctrl_probe, |
| .remove = aspeed_lpc_ctrl_remove, |
| }; |
| |
| module_platform_driver(aspeed_lpc_ctrl_driver); |
| |
| MODULE_DEVICE_TABLE(of, aspeed_lpc_ctrl_match); |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Cyril Bur <cyrilbur@gmail.com>"); |
| MODULE_DESCRIPTION("Control for aspeed 2400/2500 LPC HOST to BMC mappings"); |