blob: 8834436bc9dbccb1cc145e91b226ffa0092c4a16 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2018 Marvell
*
* Authors:
* Igal Liberman <igall@marvell.com>
* Miquèl Raynal <miquel.raynal@bootlin.com>
*
* Marvell A3700 UTMI PHY driver
*/
#include <linux/io.h>
#include <linux/iopoll.h>
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
/* Armada 3700 UTMI PHY registers */
#define USB2_PHY_PLL_CTRL_REG0 0x0
#define PLL_REF_DIV_OFF 0
#define PLL_REF_DIV_MASK GENMASK(6, 0)
#define PLL_REF_DIV_5 5
#define PLL_FB_DIV_OFF 16
#define PLL_FB_DIV_MASK GENMASK(24, 16)
#define PLL_FB_DIV_96 96
#define PLL_SEL_LPFR_OFF 28
#define PLL_SEL_LPFR_MASK GENMASK(29, 28)
#define PLL_READY BIT(31)
#define USB2_PHY_CAL_CTRL 0x8
#define PHY_PLLCAL_DONE BIT(31)
#define PHY_IMPCAL_DONE BIT(23)
#define USB2_RX_CHAN_CTRL1 0x18
#define USB2PHY_SQCAL_DONE BIT(31)
#define USB2_PHY_OTG_CTRL 0x34
#define PHY_PU_OTG BIT(4)
#define USB2_PHY_CHRGR_DETECT 0x38
#define PHY_CDP_EN BIT(2)
#define PHY_DCP_EN BIT(3)
#define PHY_PD_EN BIT(4)
#define PHY_PU_CHRG_DTC BIT(5)
#define PHY_CDP_DM_AUTO BIT(7)
#define PHY_ENSWITCH_DP BIT(12)
#define PHY_ENSWITCH_DM BIT(13)
/* Armada 3700 USB miscellaneous registers */
#define USB2_PHY_CTRL(usb32) (usb32 ? 0x20 : 0x4)
#define RB_USB2PHY_PU BIT(0)
#define USB2_DP_PULLDN_DEV_MODE BIT(5)
#define USB2_DM_PULLDN_DEV_MODE BIT(6)
#define RB_USB2PHY_SUSPM(usb32) (usb32 ? BIT(14) : BIT(7))
#define PLL_LOCK_DELAY_US 10000
#define PLL_LOCK_TIMEOUT_US 1000000
/**
* struct mvebu_a3700_utmi_caps - PHY capabilities
*
* @usb32: Flag indicating which PHY is in use (impacts the register map):
* - The UTMI PHY wired to the USB3/USB2 controller (otg)
* - The UTMI PHY wired to the USB2 controller (host only)
* @ops: PHY operations
*/
struct mvebu_a3700_utmi_caps {
int usb32;
const struct phy_ops *ops;
};
/**
* struct mvebu_a3700_utmi - PHY driver data
*
* @regs: PHY registers
* @usb_misc: Regmap with USB miscellaneous registers including PHY ones
* @caps: PHY capabilities
* @phy: PHY handle
*/
struct mvebu_a3700_utmi {
void __iomem *regs;
struct regmap *usb_misc;
const struct mvebu_a3700_utmi_caps *caps;
struct phy *phy;
};
static int mvebu_a3700_utmi_phy_power_on(struct phy *phy)
{
struct mvebu_a3700_utmi *utmi = phy_get_drvdata(phy);
struct device *dev = &phy->dev;
int usb32 = utmi->caps->usb32;
int ret = 0;
u32 reg;
/*
* Setup PLL. 40MHz clock used to be the default, being 25MHz now.
* See "PLL Settings for Typical REFCLK" table.
*/
reg = readl(utmi->regs + USB2_PHY_PLL_CTRL_REG0);
reg &= ~(PLL_REF_DIV_MASK | PLL_FB_DIV_MASK | PLL_SEL_LPFR_MASK);
reg |= (PLL_REF_DIV_5 << PLL_REF_DIV_OFF) |
(PLL_FB_DIV_96 << PLL_FB_DIV_OFF);
writel(reg, utmi->regs + USB2_PHY_PLL_CTRL_REG0);
/* Enable PHY pull up and disable USB2 suspend */
regmap_update_bits(utmi->usb_misc, USB2_PHY_CTRL(usb32),
RB_USB2PHY_SUSPM(usb32) | RB_USB2PHY_PU,
RB_USB2PHY_SUSPM(usb32) | RB_USB2PHY_PU);
if (usb32) {
/* Power up OTG module */
reg = readl(utmi->regs + USB2_PHY_OTG_CTRL);
reg |= PHY_PU_OTG;
writel(reg, utmi->regs + USB2_PHY_OTG_CTRL);
/* Disable PHY charger detection */
reg = readl(utmi->regs + USB2_PHY_CHRGR_DETECT);
reg &= ~(PHY_CDP_EN | PHY_DCP_EN | PHY_PD_EN | PHY_PU_CHRG_DTC |
PHY_CDP_DM_AUTO | PHY_ENSWITCH_DP | PHY_ENSWITCH_DM);
writel(reg, utmi->regs + USB2_PHY_CHRGR_DETECT);
/* Disable PHY DP/DM pull-down (used for device mode) */
regmap_update_bits(utmi->usb_misc, USB2_PHY_CTRL(usb32),
USB2_DP_PULLDN_DEV_MODE |
USB2_DM_PULLDN_DEV_MODE, 0);
}
/* Wait for PLL calibration */
ret = readl_poll_timeout(utmi->regs + USB2_PHY_CAL_CTRL, reg,
reg & PHY_PLLCAL_DONE,
PLL_LOCK_DELAY_US, PLL_LOCK_TIMEOUT_US);
if (ret) {
dev_err(dev, "Failed to end USB2 PLL calibration\n");
return ret;
}
/* Wait for impedance calibration */
ret = readl_poll_timeout(utmi->regs + USB2_PHY_CAL_CTRL, reg,
reg & PHY_IMPCAL_DONE,
PLL_LOCK_DELAY_US, PLL_LOCK_TIMEOUT_US);
if (ret) {
dev_err(dev, "Failed to end USB2 impedance calibration\n");
return ret;
}
/* Wait for squelch calibration */
ret = readl_poll_timeout(utmi->regs + USB2_RX_CHAN_CTRL1, reg,
reg & USB2PHY_SQCAL_DONE,
PLL_LOCK_DELAY_US, PLL_LOCK_TIMEOUT_US);
if (ret) {
dev_err(dev, "Failed to end USB2 unknown calibration\n");
return ret;
}
/* Wait for PLL to be locked */
ret = readl_poll_timeout(utmi->regs + USB2_PHY_PLL_CTRL_REG0, reg,
reg & PLL_READY,
PLL_LOCK_DELAY_US, PLL_LOCK_TIMEOUT_US);
if (ret)
dev_err(dev, "Failed to lock USB2 PLL\n");
return ret;
}
static int mvebu_a3700_utmi_phy_power_off(struct phy *phy)
{
struct mvebu_a3700_utmi *utmi = phy_get_drvdata(phy);
int usb32 = utmi->caps->usb32;
u32 reg;
/* Disable PHY pull-up and enable USB2 suspend */
reg = readl(utmi->regs + USB2_PHY_CTRL(usb32));
reg &= ~(RB_USB2PHY_PU | RB_USB2PHY_SUSPM(usb32));
writel(reg, utmi->regs + USB2_PHY_CTRL(usb32));
/* Power down OTG module */
if (usb32) {
reg = readl(utmi->regs + USB2_PHY_OTG_CTRL);
reg &= ~PHY_PU_OTG;
writel(reg, utmi->regs + USB2_PHY_OTG_CTRL);
}
return 0;
}
static const struct phy_ops mvebu_a3700_utmi_phy_ops = {
.power_on = mvebu_a3700_utmi_phy_power_on,
.power_off = mvebu_a3700_utmi_phy_power_off,
.owner = THIS_MODULE,
};
static const struct mvebu_a3700_utmi_caps mvebu_a3700_utmi_otg_phy_caps = {
.usb32 = true,
.ops = &mvebu_a3700_utmi_phy_ops,
};
static const struct mvebu_a3700_utmi_caps mvebu_a3700_utmi_host_phy_caps = {
.usb32 = false,
.ops = &mvebu_a3700_utmi_phy_ops,
};
static const struct of_device_id mvebu_a3700_utmi_of_match[] = {
{
.compatible = "marvell,a3700-utmi-otg-phy",
.data = &mvebu_a3700_utmi_otg_phy_caps,
},
{
.compatible = "marvell,a3700-utmi-host-phy",
.data = &mvebu_a3700_utmi_host_phy_caps,
},
{},
};
MODULE_DEVICE_TABLE(of, mvebu_a3700_utmi_of_match);
static int mvebu_a3700_utmi_phy_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct mvebu_a3700_utmi *utmi;
struct phy_provider *provider;
utmi = devm_kzalloc(dev, sizeof(*utmi), GFP_KERNEL);
if (!utmi)
return -ENOMEM;
/* Get UTMI memory region */
utmi->regs = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(utmi->regs))
return PTR_ERR(utmi->regs);
/* Get miscellaneous Host/PHY region */
utmi->usb_misc = syscon_regmap_lookup_by_phandle(dev->of_node,
"marvell,usb-misc-reg");
if (IS_ERR(utmi->usb_misc)) {
dev_err(dev,
"Missing USB misc purpose system controller\n");
return PTR_ERR(utmi->usb_misc);
}
/* Retrieve PHY capabilities */
utmi->caps = of_device_get_match_data(dev);
/* Instantiate the PHY */
utmi->phy = devm_phy_create(dev, NULL, utmi->caps->ops);
if (IS_ERR(utmi->phy)) {
dev_err(dev, "Failed to create the UTMI PHY\n");
return PTR_ERR(utmi->phy);
}
phy_set_drvdata(utmi->phy, utmi);
/* Ensure the PHY is powered off */
utmi->caps->ops->power_off(utmi->phy);
provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
return PTR_ERR_OR_ZERO(provider);
}
static struct platform_driver mvebu_a3700_utmi_driver = {
.probe = mvebu_a3700_utmi_phy_probe,
.driver = {
.name = "mvebu-a3700-utmi-phy",
.of_match_table = mvebu_a3700_utmi_of_match,
},
};
module_platform_driver(mvebu_a3700_utmi_driver);
MODULE_AUTHOR("Igal Liberman <igall@marvell.com>");
MODULE_AUTHOR("Miquel Raynal <miquel.raynal@bootlin.com>");
MODULE_DESCRIPTION("Marvell EBU A3700 UTMI PHY driver");
MODULE_LICENSE("GPL v2");