diff --git a/drivers/bluetooth/hci_bcm.c b/drivers/bluetooth/hci_bcm.c
index fbad52f..f306541 100644
--- a/drivers/bluetooth/hci_bcm.c
+++ b/drivers/bluetooth/hci_bcm.c
@@ -31,6 +31,7 @@
 #include <linux/clk.h>
 #include <linux/gpio/consumer.h>
 #include <linux/tty.h>
+#include <linux/interrupt.h>
 
 #include <net/bluetooth/bluetooth.h>
 #include <net/bluetooth/hci_core.h>
@@ -51,6 +52,8 @@
 	bool			clk_enabled;
 
 	u32			init_speed;
+	int			irq;
+	u8			irq_polarity;
 
 #ifdef CONFIG_PM_SLEEP
 	struct hci_uart		*hu;
@@ -149,6 +152,86 @@
 	return 0;
 }
 
+#ifdef CONFIG_PM_SLEEP
+static irqreturn_t bcm_host_wake(int irq, void *data)
+{
+	struct bcm_device *bdev = data;
+
+	bt_dev_dbg(bdev, "Host wake IRQ");
+
+	return IRQ_HANDLED;
+}
+
+static int bcm_request_irq(struct bcm_data *bcm)
+{
+	struct bcm_device *bdev = bcm->dev;
+	int err = 0;
+
+	/* If this is not a platform device, do not enable PM functionalities */
+	mutex_lock(&bcm_device_lock);
+	if (!bcm_device_exists(bdev)) {
+		err = -ENODEV;
+		goto unlock;
+	}
+
+	if (bdev->irq > 0) {
+		err = devm_request_irq(&bdev->pdev->dev, bdev->irq,
+				       bcm_host_wake, IRQF_TRIGGER_RISING,
+				       "host_wake", bdev);
+		if (err)
+			goto unlock;
+
+		device_init_wakeup(&bdev->pdev->dev, true);
+	}
+
+unlock:
+	mutex_unlock(&bcm_device_lock);
+
+	return err;
+}
+
+static const struct bcm_set_sleep_mode default_sleep_params = {
+	.sleep_mode = 1,	/* 0=Disabled, 1=UART, 2=Reserved, 3=USB */
+	.idle_host = 2,		/* idle threshold HOST, in 300ms */
+	.idle_dev = 2,		/* idle threshold device, in 300ms */
+	.bt_wake_active = 1,	/* BT_WAKE active mode: 1 = high, 0 = low */
+	.host_wake_active = 0,	/* HOST_WAKE active mode: 1 = high, 0 = low */
+	.allow_host_sleep = 1,	/* Allow host sleep in SCO flag */
+	.combine_modes = 0,	/* Combine sleep and LPM flag */
+	.tristate_control = 0,	/* Allow tri-state control of UART tx flag */
+	/* Irrelevant USB flags */
+	.usb_auto_sleep = 0,
+	.usb_resume_timeout = 0,
+	.pulsed_host_wake = 0,
+	.break_to_host = 0
+};
+
+static int bcm_setup_sleep(struct hci_uart *hu)
+{
+	struct bcm_data *bcm = hu->priv;
+	struct sk_buff *skb;
+	struct bcm_set_sleep_mode sleep_params = default_sleep_params;
+
+	sleep_params.host_wake_active = !bcm->dev->irq_polarity;
+
+	skb = __hci_cmd_sync(hu->hdev, 0xfc27, sizeof(sleep_params),
+			     &sleep_params, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		int err = PTR_ERR(skb);
+		bt_dev_err(hu->hdev, "Sleep VSC failed (%d)", err);
+		return err;
+	}
+	kfree_skb(skb);
+
+	bt_dev_dbg(hu->hdev, "Set Sleep Parameters VSC succeeded");
+
+	return 0;
+}
+#else
+static inline int bcm_request_irq(struct bcm_data *bcm) { return 0; }
+static inline int bcm_setup_sleep(struct hci_uart *hu) { return 0; }
+#endif
+
 static int bcm_open(struct hci_uart *hu)
 {
 	struct bcm_data *bcm;
@@ -178,13 +261,11 @@
 #ifdef CONFIG_PM_SLEEP
 			dev->hu = hu;
 #endif
+			bcm_gpio_set_power(bcm->dev, true);
 			break;
 		}
 	}
 
-	if (bcm->dev)
-		bcm_gpio_set_power(bcm->dev, true);
-
 	mutex_unlock(&bcm_device_lock);
 
 	return 0;
@@ -193,15 +274,21 @@
 static int bcm_close(struct hci_uart *hu)
 {
 	struct bcm_data *bcm = hu->priv;
+	struct bcm_device *bdev = bcm->dev;
 
 	bt_dev_dbg(hu->hdev, "hu %p", hu);
 
 	/* Protect bcm->dev against removal of the device or driver */
 	mutex_lock(&bcm_device_lock);
-	if (bcm_device_exists(bcm->dev)) {
-		bcm_gpio_set_power(bcm->dev, false);
+	if (bcm_device_exists(bdev)) {
+		bcm_gpio_set_power(bdev, false);
 #ifdef CONFIG_PM_SLEEP
-		bcm->dev->hu = NULL;
+		if (device_can_wakeup(&bdev->pdev->dev)) {
+			devm_free_irq(&bdev->pdev->dev, bdev->irq, bdev);
+			device_init_wakeup(&bdev->pdev->dev, false);
+		}
+
+		bdev->hu = NULL;
 #endif
 	}
 	mutex_unlock(&bcm_device_lock);
@@ -227,6 +314,7 @@
 
 static int bcm_setup(struct hci_uart *hu)
 {
+	struct bcm_data *bcm = hu->priv;
 	char fw_name[64];
 	const struct firmware *fw;
 	unsigned int speed;
@@ -281,6 +369,12 @@
 	release_firmware(fw);
 
 	err = btbcm_finalize(hu->hdev);
+	if (err)
+		return err;
+
+	err = bcm_request_irq(bcm);
+	if (!err)
+		err = bcm_setup_sleep(hu);
 
 	return err;
 }
@@ -335,6 +429,7 @@
 static int bcm_suspend(struct device *dev)
 {
 	struct bcm_device *bdev = platform_get_drvdata(to_platform_device(dev));
+	int error;
 
 	bt_dev_dbg(bdev, "suspend: is_suspended %d", bdev->is_suspended);
 
@@ -357,6 +452,12 @@
 		mdelay(15);
 	}
 
+	if (device_may_wakeup(&bdev->pdev->dev)) {
+		error = enable_irq_wake(bdev->irq);
+		if (!error)
+			bt_dev_dbg(bdev, "BCM irq: enabled");
+	}
+
 unlock:
 	mutex_unlock(&bcm_device_lock);
 
@@ -375,6 +476,11 @@
 	if (!bdev->hu)
 		goto unlock;
 
+	if (device_may_wakeup(&bdev->pdev->dev)) {
+		disable_irq_wake(bdev->irq);
+		bt_dev_dbg(bdev, "BCM irq: disabled");
+	}
+
 	if (bdev->device_wakeup) {
 		gpiod_set_value(bdev->device_wakeup, true);
 		bt_dev_dbg(bdev, "resume, delaying 15 ms");
@@ -397,10 +503,12 @@
 
 static const struct acpi_gpio_params device_wakeup_gpios = { 0, 0, false };
 static const struct acpi_gpio_params shutdown_gpios = { 1, 0, false };
+static const struct acpi_gpio_params host_wakeup_gpios = { 2, 0, false };
 
 static const struct acpi_gpio_mapping acpi_bcm_default_gpios[] = {
 	{ "device-wakeup-gpios", &device_wakeup_gpios, 1 },
 	{ "shutdown-gpios", &shutdown_gpios, 1 },
+	{ "host-wakeup-gpios", &host_wakeup_gpios, 1 },
 	{ },
 };
 
@@ -408,13 +516,30 @@
 static int bcm_resource(struct acpi_resource *ares, void *data)
 {
 	struct bcm_device *dev = data;
+	struct acpi_resource_extended_irq *irq;
+	struct acpi_resource_gpio *gpio;
+	struct acpi_resource_uart_serialbus *sb;
 
-	if (ares->type == ACPI_RESOURCE_TYPE_SERIAL_BUS) {
-		struct acpi_resource_uart_serialbus *sb;
+	switch (ares->type) {
+	case ACPI_RESOURCE_TYPE_EXTENDED_IRQ:
+		irq = &ares->data.extended_irq;
+		dev->irq_polarity = irq->polarity;
+		break;
 
+	case ACPI_RESOURCE_TYPE_GPIO:
+		gpio = &ares->data.gpio;
+		if (gpio->connection_type == ACPI_RESOURCE_GPIO_TYPE_INT)
+			dev->irq_polarity = gpio->polarity;
+		break;
+
+	case ACPI_RESOURCE_TYPE_SERIAL_BUS:
 		sb = &ares->data.uart_serial_bus;
 		if (sb->type == ACPI_RESOURCE_SERIAL_TYPE_UART)
 			dev->init_speed = sb->default_baud_rate;
+		break;
+
+	default:
+		break;
 	}
 
 	/* Always tell the ACPI core to skip this resource */
@@ -453,6 +578,21 @@
 	if (IS_ERR(dev->shutdown))
 		return PTR_ERR(dev->shutdown);
 
+	/* IRQ can be declared in ACPI table as Interrupt or GpioInt */
+	dev->irq = platform_get_irq(pdev, 0);
+	if (dev->irq <= 0) {
+		struct gpio_desc *gpio;
+
+		gpio = devm_gpiod_get_optional(&pdev->dev, "host-wakeup",
+					       GPIOD_IN);
+		if (IS_ERR(gpio))
+			return PTR_ERR(gpio);
+
+		dev->irq = gpiod_to_irq(gpio);
+	}
+
+	dev_info(&pdev->dev, "BCM irq: %d\n", dev->irq);
+
 	/* Make sure at-least one of the GPIO is defined and that
 	 * a name is specified for this instance
 	 */