Merge commit 'origin'
Manual fixup of conflicts on:
arch/powerpc/include/asm/dcr-regs.h
drivers/net/ibm_newemac/core.h
diff --git a/Documentation/powerpc/00-INDEX b/Documentation/powerpc/00-INDEX
index 29d839c..e3960b8 100644
--- a/Documentation/powerpc/00-INDEX
+++ b/Documentation/powerpc/00-INDEX
@@ -18,10 +18,6 @@
- Linux 2.6.x on MPC52xx family
mpc52xx-device-tree-bindings.txt
- MPC5200 Device Tree Bindings
-ppc_htab.txt
- - info about the Linux/PPC /proc/ppc_htab entry
-smp.txt
- - use and state info about Linux/PPC on MP machines
sound.txt
- info on sound support under Linux/PPC
zImage_layout.txt
diff --git a/Documentation/powerpc/dts-bindings/fsl/83xx-512x-pci.txt b/Documentation/powerpc/dts-bindings/fsl/83xx-512x-pci.txt
new file mode 100644
index 0000000..35a4653
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/fsl/83xx-512x-pci.txt
@@ -0,0 +1,40 @@
+* Freescale 83xx and 512x PCI bridges
+
+Freescale 83xx and 512x SOCs include the same pci bridge core.
+
+83xx/512x specific notes:
+- reg: should contain two address length tuples
+ The first is for the internal pci bridge registers
+ The second is for the pci config space access registers
+
+Example (MPC8313ERDB)
+ pci0: pci@e0008500 {
+ cell-index = <1>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ interrupt-map = <
+ /* IDSEL 0x0E -mini PCI */
+ 0x7000 0x0 0x0 0x1 &ipic 18 0x8
+ 0x7000 0x0 0x0 0x2 &ipic 18 0x8
+ 0x7000 0x0 0x0 0x3 &ipic 18 0x8
+ 0x7000 0x0 0x0 0x4 &ipic 18 0x8
+
+ /* IDSEL 0x0F - PCI slot */
+ 0x7800 0x0 0x0 0x1 &ipic 17 0x8
+ 0x7800 0x0 0x0 0x2 &ipic 18 0x8
+ 0x7800 0x0 0x0 0x3 &ipic 17 0x8
+ 0x7800 0x0 0x0 0x4 &ipic 18 0x8>;
+ interrupt-parent = <&ipic>;
+ interrupts = <66 0x8>;
+ bus-range = <0x0 0x0>;
+ ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
+ 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
+ 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
+ clock-frequency = <66666666>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0xe0008500 0x100 /* internal registers */
+ 0xe0008300 0x8>; /* config space access registers */
+ compatible = "fsl,mpc8349-pci";
+ device_type = "pci";
+ };
diff --git a/Documentation/powerpc/dts-bindings/fsl/8xxx_gpio.txt b/Documentation/powerpc/dts-bindings/fsl/8xxx_gpio.txt
new file mode 100644
index 0000000..d015dce
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/fsl/8xxx_gpio.txt
@@ -0,0 +1,40 @@
+GPIO controllers on MPC8xxx SoCs
+
+This is for the non-QE/CPM/GUTs GPIO controllers as found on
+8349, 8572, 8610 and compatible.
+
+Every GPIO controller node must have #gpio-cells property defined,
+this information will be used to translate gpio-specifiers.
+
+Required properties:
+- compatible : "fsl,<CHIP>-gpio" followed by "fsl,mpc8349-gpio" for
+ 83xx, "fsl,mpc8572-gpio" for 85xx and "fsl,mpc8610-gpio" for 86xx.
+- #gpio-cells : Should be two. The first cell is the pin number and the
+ second cell is used to specify optional parameters (currently unused).
+ - interrupts : Interrupt mapping for GPIO IRQ (currently unused).
+ - interrupt-parent : Phandle for the interrupt controller that
+ services interrupts for this device.
+- gpio-controller : Marks the port as GPIO controller.
+
+Example of gpio-controller nodes for a MPC8347 SoC:
+
+ gpio1: gpio-controller@c00 {
+ #gpio-cells = <2>;
+ compatible = "fsl,mpc8347-gpio", "fsl,mpc8349-gpio";
+ reg = <0xc00 0x100>;
+ interrupts = <74 0x8>;
+ interrupt-parent = <&ipic>;
+ gpio-controller;
+ };
+
+ gpio2: gpio-controller@d00 {
+ #gpio-cells = <2>;
+ compatible = "fsl,mpc8347-gpio", "fsl,mpc8349-gpio";
+ reg = <0xd00 0x100>;
+ interrupts = <75 0x8>;
+ interrupt-parent = <&ipic>;
+ gpio-controller;
+ };
+
+See booting-without-of.txt for details of how to specify GPIO
+information for devices.
diff --git a/Documentation/powerpc/dts-bindings/fsl/dma.txt b/Documentation/powerpc/dts-bindings/fsl/dma.txt
index 86826df..cc45311 100644
--- a/Documentation/powerpc/dts-bindings/fsl/dma.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/dma.txt
@@ -20,7 +20,7 @@
- compatible : compatible list, contains 2 entries, first is
"fsl,CHIP-dma-channel", where CHIP is the processor
(mpc8349, mpc8350, etc.) and the second is
- "fsl,elo-dma-channel"
+ "fsl,elo-dma-channel". However, see note below.
- reg : <registers mapping for channel>
- cell-index : dma channel index starts at 0.
@@ -82,7 +82,7 @@
- compatible : compatible list, contains 2 entries, first is
"fsl,CHIP-dma-channel", where CHIP is the processor
(mpc8540, mpc8560, etc.) and the second is
- "fsl,eloplus-dma-channel"
+ "fsl,eloplus-dma-channel". However, see note below.
- cell-index : dma channel index starts at 0.
- reg : <registers mapping for channel>
- interrupts : <interrupt mapping for DMA channel IRQ>
@@ -125,3 +125,12 @@
interrupts = <17 2>;
};
};
+
+Note on DMA channel compatible properties: The compatible property must say
+"fsl,elo-dma-channel" or "fsl,eloplus-dma-channel" to be used by the Elo DMA
+driver (fsldma). Any DMA channel used by fsldma cannot be used by another
+DMA driver, such as the SSI sound drivers for the MPC8610. Therefore, any DMA
+channel that should be used for another driver should not use
+"fsl,elo-dma-channel" or "fsl,eloplus-dma-channel". For the SSI drivers, for
+example, the compatible property should be "fsl,ssi-dma-channel". See ssi.txt
+for more information.
diff --git a/Documentation/powerpc/dts-bindings/fsl/ssi.txt b/Documentation/powerpc/dts-bindings/fsl/ssi.txt
index d100555d..a2d96399 100644
--- a/Documentation/powerpc/dts-bindings/fsl/ssi.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/ssi.txt
@@ -24,6 +24,12 @@
"rj-master" - r.j., SSI is clock master
"ac97-slave" - AC97 mode, SSI is clock slave
"ac97-master" - AC97 mode, SSI is clock master
+- fsl,playback-dma: phandle to a node for the DMA channel to use for
+ playback of audio. This is typically dictated by SOC
+ design. See the notes below.
+- fsl,capture-dma: phandle to a node for the DMA channel to use for
+ capture (recording) of audio. This is typically dictated
+ by SOC design. See the notes below.
Optional properties:
- codec-handle : phandle to a 'codec' node that defines an audio
@@ -36,3 +42,20 @@
Child 'codec' node optional properties:
- clock-frequency : The frequency of the input clock, which typically
comes from an on-board dedicated oscillator.
+
+Notes on fsl,playback-dma and fsl,capture-dma:
+
+On SOCs that have an SSI, specific DMA channels are hard-wired for playback
+and capture. On the MPC8610, for example, SSI1 must use DMA channel 0 for
+playback and DMA channel 1 for capture. SSI2 must use DMA channel 2 for
+playback and DMA channel 3 for capture. The developer can choose which
+DMA controller to use, but the channels themselves are hard-wired. The
+purpose of these two properties is to represent this hardware design.
+
+The device tree nodes for the DMA channels that are referenced by
+"fsl,playback-dma" and "fsl,capture-dma" must be marked as compatible with
+"fsl,ssi-dma-channel". The SOC-specific compatible string (e.g.
+"fsl,mpc8610-dma-channel") can remain. If these nodes are left as
+"fsl,elo-dma-channel" or "fsl,eloplus-dma-channel", then the generic Elo DMA
+drivers (fsldma) will attempt to use them, and it will conflict with the
+sound drivers.
diff --git a/Documentation/powerpc/ppc_htab.txt b/Documentation/powerpc/ppc_htab.txt
deleted file mode 100644
index 8b8c7df..0000000
--- a/Documentation/powerpc/ppc_htab.txt
+++ /dev/null
@@ -1,118 +0,0 @@
- Information about /proc/ppc_htab
-=====================================================================
-
-This document and the related code was written by me (Cort Dougan), please
-email me (cort@fsmlabs.com) if you have questions, comments or corrections.
-
-Last Change: 2.16.98
-
-This entry in the proc directory is readable by all users but only
-writable by root.
-
-The ppc_htab interface is a user level way of accessing the
-performance monitoring registers as well as providing information
-about the PTE hash table.
-
-1. Reading
-
- Reading this file will give you information about the memory management
- hash table that serves as an extended tlb for page translation on the
- powerpc. It will also give you information about performance measurement
- specific to the cpu that you are using.
-
- Explanation of the 604 Performance Monitoring Fields:
- MMCR0 - the current value of the MMCR0 register
- PMC1
- PMC2 - the value of the performance counters and a
- description of what events they are counting
- which are based on MMCR0 bit settings.
- Explanation of the PTE Hash Table fields:
-
- Size - hash table size in Kb.
- Buckets - number of buckets in the table.
- Address - the virtual kernel address of the hash table base.
- Entries - the number of ptes that can be stored in the hash table.
- User/Kernel - how many pte's are in use by the kernel or user at that time.
- Overflows - How many of the entries are in their secondary hash location.
- Percent full - ratio of free pte entries to in use entries.
- Reloads - Count of how many hash table misses have occurred
- that were fixed with a reload from the linux tables.
- Should always be 0 on 603 based machines.
- Non-error Misses - Count of how many hash table misses have occurred
- that were completed with the creation of a pte in the linux
- tables with a call to do_page_fault().
- Error Misses - Number of misses due to errors such as bad address
- and permission violations. This includes kernel access of
- bad user addresses that are fixed up by the trap handler.
-
- Note that calculation of the data displayed from /proc/ppc_htab takes
- a long time and spends a great deal of time in the kernel. It would
- be quite hard on performance to read this file constantly. In time
- there may be a counter in the kernel that allows successive reads from
- this file only after a given amount of time has passed to reduce the
- possibility of a user slowing the system by reading this file.
-
-2. Writing
-
- Writing to the ppc_htab allows you to change the characteristics of
- the powerpc PTE hash table and setup performance monitoring.
-
- Resizing the PTE hash table is not enabled right now due to many
- complications with moving the hash table, rehashing the entries
- and many many SMP issues that would have to be dealt with.
-
- Write options to ppc_htab:
-
- - To set the size of the hash table to 64Kb:
-
- echo 'size 64' > /proc/ppc_htab
-
- The size must be a multiple of 64 and must be greater than or equal to
- 64.
-
- - To turn off performance monitoring:
-
- echo 'off' > /proc/ppc_htab
-
- - To reset the counters without changing what they're counting:
-
- echo 'reset' > /proc/ppc_htab
-
- Note that counting will continue after the reset if it is enabled.
-
- - To count only events in user mode or only in kernel mode:
-
- echo 'user' > /proc/ppc_htab
- ...or...
- echo 'kernel' > /proc/ppc_htab
-
- Note that these two options are exclusive of one another and the
- lack of either of these options counts user and kernel.
- Using 'reset' and 'off' reset these flags.
-
- - The 604 has 2 performance counters which can each count events from
- a specific set of events. These sets are disjoint so it is not
- possible to count _any_ combination of 2 events. One event can
- be counted by PMC1 and one by PMC2.
-
- To start counting a particular event use:
-
- echo 'event' > /proc/ppc_htab
-
- and choose from these events:
-
- PMC1
- ----
- 'ic miss' - instruction cache misses
- 'dtlb' - data tlb misses (not hash table misses)
-
- PMC2
- ----
- 'dc miss' - data cache misses
- 'itlb' - instruction tlb misses (not hash table misses)
- 'load miss time' - cycles to complete a load miss
-
-3. Bugs
-
- The PMC1 and PMC2 counters can overflow and give no indication of that
- in /proc/ppc_htab.
diff --git a/Documentation/powerpc/smp.txt b/Documentation/powerpc/smp.txt
deleted file mode 100644
index 5b581b8..0000000
--- a/Documentation/powerpc/smp.txt
+++ /dev/null
@@ -1,34 +0,0 @@
- Information about Linux/PPC SMP mode
-=====================================================================
-
-This document and the related code was written by me
-(Cort Dougan, cort@fsmlabs.com) please email me if you have questions,
-comments or corrections.
-
-Last Change: 3.31.99
-
-If you want to help by writing code or testing different hardware please
-email me!
-
-1. State of Supported Hardware
-
- PowerSurge Architecture - tested on UMAX s900, Apple 9600
- The second processor on this machine boots up just fine and
- enters its idle loop. Hopefully a completely working SMP kernel
- on this machine will be done shortly.
-
- The code makes the assumption of only two processors. The changes
- necessary to work with any number would not be overly difficult but
- I don't have any machines with >2 processors so it's not high on my
- list of priorities. If anyone else would like do to the work email
- me and I can point out the places that need changed. If you have >2
- processors and don't want to add support yourself let me know and I
- can take a look into it.
-
- BeBox
- BeBox support hasn't been added to the 2.1.X kernels from 2.0.X
- but work is being done and SMP support for BeBox is in the works.
-
- CHRP
- CHRP SMP works and is fairly solid. It's been tested on the IBM F50
- with 4 processors for quite some time now.
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 587da5e..c171f5b 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -415,8 +415,11 @@
config FORCE_MAX_ZONEORDER
int "Maximum zone order"
+ range 9 64 if PPC_64K_PAGES
default "9" if PPC_64K_PAGES
+ range 13 64 if PPC64 && !PPC_64K_PAGES
default "13" if PPC64 && !PPC_64K_PAGES
+ range 11 64
default "11"
help
The kernel memory allocator divides physically contiguous memory
@@ -806,6 +809,19 @@
endmenu
if PPC64
+config RELOCATABLE
+ bool "Build a relocatable kernel"
+ help
+ This builds a kernel image that is capable of running anywhere
+ in the RMA (real memory area) at any 16k-aligned base address.
+ The kernel is linked as a position-independent executable (PIE)
+ and contains dynamic relocations which are processed early
+ in the bootup process.
+
+ One use is for the kexec on panic case where the recovery kernel
+ must live at a different physical address than the primary
+ kernel.
+
config PAGE_OFFSET
hex
default "0xc000000000000000"
diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug
index 4ebc52a..15eb278 100644
--- a/arch/powerpc/Kconfig.debug
+++ b/arch/powerpc/Kconfig.debug
@@ -51,6 +51,11 @@
depends on DEBUG_KERNEL
default n
+config MSI_BITMAP_SELFTEST
+ bool "Run self-tests of the MSI bitmap code."
+ depends on DEBUG_KERNEL
+ default n
+
config XMON
bool "Include xmon kernel debugger"
depends on DEBUG_KERNEL
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index c6be19e..24dd1a3 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -63,7 +63,9 @@
override AR := GNUTARGET=elf$(CONFIG_WORD_SIZE)-powerpc $(AR)
endif
-LDFLAGS_vmlinux := -Bstatic
+LDFLAGS_vmlinux-yy := -Bstatic
+LDFLAGS_vmlinux-$(CONFIG_PPC64)$(CONFIG_RELOCATABLE) := -pie
+LDFLAGS_vmlinux := $(LDFLAGS_vmlinux-yy)
CFLAGS-$(CONFIG_PPC64) := -mminimal-toc -mtraceback=none -mcall-aixdesc
CFLAGS-$(CONFIG_PPC32) := -ffixed-r2 -mmultiple
@@ -102,7 +104,10 @@
KBUILD_CFLAGS += $(call cc-option,-mno-altivec)
# No SPE instruction when building kernel
+# (We use all available options to help semi-broken compilers)
KBUILD_CFLAGS += $(call cc-option,-mno-spe)
+KBUILD_CFLAGS += $(call cc-option,-mspe=no)
+KBUILD_CFLAGS += $(call cc-option,-mabi=no-spe)
# Enable unit-at-a-time mode when possible. It shrinks the
# kernel considerably.
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 65d1a84..aac1406 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -310,8 +310,11 @@
$(obj)/vmlinux.strip: vmlinux
$(STRIP) -s -R .comment $< -o $@
+# The iseries hypervisor won't take an ET_DYN executable, so this
+# changes the type (byte 17) in the file to ET_EXEC (2).
$(obj)/zImage.iseries: vmlinux
$(STRIP) -s -R .comment $< -o $@
+ printf "\x02" | dd of=$@ conv=notrunc bs=1 seek=17
$(obj)/uImage: vmlinux $(wrapperbits)
$(call if_changed,wrap,uboot)
diff --git a/arch/powerpc/boot/addnote.c b/arch/powerpc/boot/addnote.c
index b1e5611..dcc9ab2 100644
--- a/arch/powerpc/boot/addnote.c
+++ b/arch/powerpc/boot/addnote.c
@@ -11,7 +11,12 @@
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
- * Usage: addnote zImage
+ * Usage: addnote zImage [note.elf]
+ *
+ * If note.elf is supplied, it is the name of an ELF file that contains
+ * an RPA note to use instead of the built-in one. Alternatively, the
+ * note.elf file may be empty, in which case the built-in RPA note is
+ * used (this is to simplify how this is invoked from the wrapper script).
*/
#include <stdio.h>
#include <stdlib.h>
@@ -43,27 +48,29 @@
*/
#define N_RPA_DESCR 8
unsigned int rpanote[N_RPA_DESCR] = {
- 0, /* lparaffinity */
- 64, /* min_rmo_size */
+ 1, /* lparaffinity */
+ 128, /* min_rmo_size */
0, /* min_rmo_percent */
- 40, /* max_pft_size */
+ 46, /* max_pft_size */
1, /* splpar */
-1, /* min_load */
- 0, /* new_mem_def */
- 1, /* ignore_my_client_config */
+ 1, /* new_mem_def */
+ 0, /* ignore_my_client_config */
};
#define ROUNDUP(len) (((len) + 3) & ~3)
unsigned char buf[512];
+unsigned char notebuf[512];
-#define GET_16BE(off) ((buf[off] << 8) + (buf[(off)+1]))
-#define GET_32BE(off) ((GET_16BE(off) << 16) + GET_16BE((off)+2))
+#define GET_16BE(b, off) (((b)[off] << 8) + ((b)[(off)+1]))
+#define GET_32BE(b, off) ((GET_16BE((b), (off)) << 16) + \
+ GET_16BE((b), (off)+2))
-#define PUT_16BE(off, v) (buf[off] = ((v) >> 8) & 0xff, \
- buf[(off) + 1] = (v) & 0xff)
-#define PUT_32BE(off, v) (PUT_16BE((off), (v) >> 16), \
- PUT_16BE((off) + 2, (v)))
+#define PUT_16BE(b, off, v) ((b)[off] = ((v) >> 8) & 0xff, \
+ (b)[(off) + 1] = (v) & 0xff)
+#define PUT_32BE(b, off, v) (PUT_16BE((b), (off), (v) >> 16), \
+ PUT_16BE((b), (off) + 2, (v)))
/* Structure of an ELF file */
#define E_IDENT 0 /* ELF header */
@@ -88,15 +95,71 @@
unsigned char elf_magic[4] = { 0x7f, 'E', 'L', 'F' };
+unsigned char *read_rpanote(const char *fname, int *nnp)
+{
+ int notefd, nr, i;
+ int ph, ps, np;
+ int note, notesize;
+
+ notefd = open(fname, O_RDONLY);
+ if (notefd < 0) {
+ perror(fname);
+ exit(1);
+ }
+ nr = read(notefd, notebuf, sizeof(notebuf));
+ if (nr < 0) {
+ perror("read note");
+ exit(1);
+ }
+ if (nr == 0) /* empty file */
+ return NULL;
+ if (nr < E_HSIZE ||
+ memcmp(¬ebuf[E_IDENT+EI_MAGIC], elf_magic, 4) != 0 ||
+ notebuf[E_IDENT+EI_CLASS] != ELFCLASS32 ||
+ notebuf[E_IDENT+EI_DATA] != ELFDATA2MSB)
+ goto notelf;
+ close(notefd);
+
+ /* now look for the RPA-note */
+ ph = GET_32BE(notebuf, E_PHOFF);
+ ps = GET_16BE(notebuf, E_PHENTSIZE);
+ np = GET_16BE(notebuf, E_PHNUM);
+ if (ph < E_HSIZE || ps < PH_HSIZE || np < 1)
+ goto notelf;
+
+ for (i = 0; i < np; ++i, ph += ps) {
+ if (GET_32BE(notebuf, ph + PH_TYPE) != PT_NOTE)
+ continue;
+ note = GET_32BE(notebuf, ph + PH_OFFSET);
+ notesize = GET_32BE(notebuf, ph + PH_FILESZ);
+ if (notesize < 34 || note + notesize > nr)
+ continue;
+ if (GET_32BE(notebuf, note) != strlen(rpaname) + 1 ||
+ GET_32BE(notebuf, note + 8) != 0x12759999 ||
+ strcmp((char *)¬ebuf[note + 12], rpaname) != 0)
+ continue;
+ /* looks like an RPA note, return it */
+ *nnp = notesize;
+ return ¬ebuf[note];
+ }
+ /* no RPA note found */
+ return NULL;
+
+ notelf:
+ fprintf(stderr, "%s is not a big-endian 32-bit ELF image\n", fname);
+ exit(1);
+}
+
int
main(int ac, char **av)
{
int fd, n, i;
int ph, ps, np;
int nnote, nnote2, ns;
+ unsigned char *rpap;
- if (ac != 2) {
- fprintf(stderr, "Usage: %s elf-file\n", av[0]);
+ if (ac != 2 && ac != 3) {
+ fprintf(stderr, "Usage: %s elf-file [rpanote.elf]\n", av[0]);
exit(1);
}
fd = open(av[1], O_RDWR);
@@ -107,6 +170,7 @@
nnote = 12 + ROUNDUP(strlen(arch) + 1) + sizeof(descr);
nnote2 = 12 + ROUNDUP(strlen(rpaname) + 1) + sizeof(rpanote);
+ rpap = NULL;
n = read(fd, buf, sizeof(buf));
if (n < 0) {
@@ -124,16 +188,19 @@
exit(1);
}
- ph = GET_32BE(E_PHOFF);
- ps = GET_16BE(E_PHENTSIZE);
- np = GET_16BE(E_PHNUM);
+ if (ac == 3)
+ rpap = read_rpanote(av[2], &nnote2);
+
+ ph = GET_32BE(buf, E_PHOFF);
+ ps = GET_16BE(buf, E_PHENTSIZE);
+ np = GET_16BE(buf, E_PHNUM);
if (ph < E_HSIZE || ps < PH_HSIZE || np < 1)
goto notelf;
if (ph + (np + 2) * ps + nnote + nnote2 > n)
goto nospace;
for (i = 0; i < np; ++i) {
- if (GET_32BE(ph + PH_TYPE) == PT_NOTE) {
+ if (GET_32BE(buf, ph + PH_TYPE) == PT_NOTE) {
fprintf(stderr, "%s already has a note entry\n",
av[1]);
exit(0);
@@ -148,37 +215,42 @@
/* fill in the program header entry */
ns = ph + 2 * ps;
- PUT_32BE(ph + PH_TYPE, PT_NOTE);
- PUT_32BE(ph + PH_OFFSET, ns);
- PUT_32BE(ph + PH_FILESZ, nnote);
+ PUT_32BE(buf, ph + PH_TYPE, PT_NOTE);
+ PUT_32BE(buf, ph + PH_OFFSET, ns);
+ PUT_32BE(buf, ph + PH_FILESZ, nnote);
/* fill in the note area we point to */
/* XXX we should probably make this a proper section */
- PUT_32BE(ns, strlen(arch) + 1);
- PUT_32BE(ns + 4, N_DESCR * 4);
- PUT_32BE(ns + 8, 0x1275);
+ PUT_32BE(buf, ns, strlen(arch) + 1);
+ PUT_32BE(buf, ns + 4, N_DESCR * 4);
+ PUT_32BE(buf, ns + 8, 0x1275);
strcpy((char *) &buf[ns + 12], arch);
ns += 12 + strlen(arch) + 1;
for (i = 0; i < N_DESCR; ++i, ns += 4)
- PUT_32BE(ns, descr[i]);
+ PUT_32BE(buf, ns, descr[i]);
/* fill in the second program header entry and the RPA note area */
ph += ps;
- PUT_32BE(ph + PH_TYPE, PT_NOTE);
- PUT_32BE(ph + PH_OFFSET, ns);
- PUT_32BE(ph + PH_FILESZ, nnote2);
+ PUT_32BE(buf, ph + PH_TYPE, PT_NOTE);
+ PUT_32BE(buf, ph + PH_OFFSET, ns);
+ PUT_32BE(buf, ph + PH_FILESZ, nnote2);
/* fill in the note area we point to */
- PUT_32BE(ns, strlen(rpaname) + 1);
- PUT_32BE(ns + 4, sizeof(rpanote));
- PUT_32BE(ns + 8, 0x12759999);
- strcpy((char *) &buf[ns + 12], rpaname);
- ns += 12 + ROUNDUP(strlen(rpaname) + 1);
- for (i = 0; i < N_RPA_DESCR; ++i, ns += 4)
- PUT_32BE(ns, rpanote[i]);
+ if (rpap) {
+ /* RPA note supplied in file, just copy the whole thing over */
+ memcpy(buf + ns, rpap, nnote2);
+ } else {
+ PUT_32BE(buf, ns, strlen(rpaname) + 1);
+ PUT_32BE(buf, ns + 4, sizeof(rpanote));
+ PUT_32BE(buf, ns + 8, 0x12759999);
+ strcpy((char *) &buf[ns + 12], rpaname);
+ ns += 12 + ROUNDUP(strlen(rpaname) + 1);
+ for (i = 0; i < N_RPA_DESCR; ++i, ns += 4)
+ PUT_32BE(buf, ns, rpanote[i]);
+ }
/* Update the number of program headers */
- PUT_16BE(E_PHNUM, np + 2);
+ PUT_16BE(buf, E_PHNUM, np + 2);
/* write back */
lseek(fd, (long) 0, SEEK_SET);
diff --git a/arch/powerpc/boot/dtc-src/Makefile.dtc b/arch/powerpc/boot/dtc-src/Makefile.dtc
index d607fdb..6ddf9ec 100644
--- a/arch/powerpc/boot/dtc-src/Makefile.dtc
+++ b/arch/powerpc/boot/dtc-src/Makefile.dtc
@@ -5,21 +5,5 @@
#
DTC_SRCS = dtc.c flattree.c fstree.c data.c livetree.c treesource.c srcpos.c \
checks.c
-DTC_EXTRA = dtc.h srcpos.h
-DTC_LEXFILES = dtc-lexer.l
-DTC_BISONFILES = dtc-parser.y
-
-DTC_LEX_SRCS = $(DTC_LEXFILES:%.l=%.lex.c)
-DTC_BISON_SRCS = $(DTC_BISONFILES:%.y=%.tab.c)
-DTC_BISON_INCLUDES = $(DTC_BISONFILES:%.y=%.tab.h)
-
-DTC_GEN_SRCS = $(DTC_LEX_SRCS) $(DTC_BISON_SRCS)
-DTC_GEN_ALL = $(DTC_GEN_SRCS) $(DTC_BISON_INCLUDES)
+DTC_GEN_SRCS = dtc-lexer.lex.c dtc-parser.tab.c
DTC_OBJS = $(DTC_SRCS:%.c=%.o) $(DTC_GEN_SRCS:%.c=%.o)
-
-DTC_CLEANFILES = $(DTC_GEN_ALL)
-
-# We assume the containing Makefile system can do auto-dependencies for most
-# things, but we supply the dependencies on generated header files explicitly
-
-$(addprefix $(DTC_objdir)/,$(DTC_GEN_SRCS:%.c=%.o)): $(addprefix $(DTC_objdir)/,$(DTC_BISON_INCLUDES))
diff --git a/arch/powerpc/boot/dtc-src/checks.c b/arch/powerpc/boot/dtc-src/checks.c
index 2ce961c..9548579 100644
--- a/arch/powerpc/boot/dtc-src/checks.c
+++ b/arch/powerpc/boot/dtc-src/checks.c
@@ -242,6 +242,42 @@
}
NODE_CHECK(duplicate_property_names, NULL, ERROR);
+#define LOWERCASE "abcdefghijklmnopqrstuvwxyz"
+#define UPPERCASE "ABCDEFGHIJKLMNOPQRSTUVWXYZ"
+#define DIGITS "0123456789"
+#define PROPNODECHARS LOWERCASE UPPERCASE DIGITS ",._+*#?-"
+
+static void check_node_name_chars(struct check *c, struct node *dt,
+ struct node *node)
+{
+ int n = strspn(node->name, c->data);
+
+ if (n < strlen(node->name))
+ FAIL(c, "Bad character '%c' in node %s",
+ node->name[n], node->fullpath);
+}
+NODE_CHECK(node_name_chars, PROPNODECHARS "@", ERROR);
+
+static void check_node_name_format(struct check *c, struct node *dt,
+ struct node *node)
+{
+ if (strchr(get_unitname(node), '@'))
+ FAIL(c, "Node %s has multiple '@' characters in name",
+ node->fullpath);
+}
+NODE_CHECK(node_name_format, NULL, ERROR, &node_name_chars);
+
+static void check_property_name_chars(struct check *c, struct node *dt,
+ struct node *node, struct property *prop)
+{
+ int n = strspn(prop->name, c->data);
+
+ if (n < strlen(prop->name))
+ FAIL(c, "Bad character '%c' in property name \"%s\", node %s",
+ prop->name[n], prop->name, node->fullpath);
+}
+PROP_CHECK(property_name_chars, PROPNODECHARS, ERROR);
+
static void check_explicit_phandles(struct check *c, struct node *root,
struct node *node)
{
@@ -280,16 +316,29 @@
static void check_name_properties(struct check *c, struct node *root,
struct node *node)
{
- struct property *prop;
+ struct property **pp, *prop = NULL;
- prop = get_property(node, "name");
+ for (pp = &node->proplist; *pp; pp = &((*pp)->next))
+ if (streq((*pp)->name, "name")) {
+ prop = *pp;
+ break;
+ }
+
if (!prop)
return; /* No name property, that's fine */
if ((prop->val.len != node->basenamelen+1)
- || (memcmp(prop->val.val, node->name, node->basenamelen) != 0))
+ || (memcmp(prop->val.val, node->name, node->basenamelen) != 0)) {
FAIL(c, "\"name\" property in %s is incorrect (\"%s\" instead"
" of base node name)", node->fullpath, prop->val.val);
+ } else {
+ /* The name property is correct, and therefore redundant.
+ * Delete it */
+ *pp = prop->next;
+ free(prop->name);
+ data_free(prop->val);
+ free(prop);
+ }
}
CHECK_IS_STRING(name_is_string, "name", ERROR);
NODE_CHECK(name_properties, NULL, ERROR, &name_is_string);
@@ -301,23 +350,23 @@
static void fixup_phandle_references(struct check *c, struct node *dt,
struct node *node, struct property *prop)
{
- struct marker *m = prop->val.markers;
- struct node *refnode;
- cell_t phandle;
+ struct marker *m = prop->val.markers;
+ struct node *refnode;
+ cell_t phandle;
- for_each_marker_of_type(m, REF_PHANDLE) {
- assert(m->offset + sizeof(cell_t) <= prop->val.len);
+ for_each_marker_of_type(m, REF_PHANDLE) {
+ assert(m->offset + sizeof(cell_t) <= prop->val.len);
- refnode = get_node_by_ref(dt, m->ref);
- if (! refnode) {
- FAIL(c, "Reference to non-existent node or label \"%s\"\n",
- m->ref);
- continue;
- }
+ refnode = get_node_by_ref(dt, m->ref);
+ if (! refnode) {
+ FAIL(c, "Reference to non-existent node or label \"%s\"\n",
+ m->ref);
+ continue;
+ }
- phandle = get_node_phandle(dt, refnode);
- *((cell_t *)(prop->val.val + m->offset)) = cpu_to_be32(phandle);
- }
+ phandle = get_node_phandle(dt, refnode);
+ *((cell_t *)(prop->val.val + m->offset)) = cpu_to_fdt32(phandle);
+ }
}
CHECK(phandle_references, NULL, NULL, fixup_phandle_references, NULL, ERROR,
&duplicate_node_names, &explicit_phandles);
@@ -498,6 +547,7 @@
static struct check *check_table[] = {
&duplicate_node_names, &duplicate_property_names,
+ &node_name_chars, &node_name_format, &property_name_chars,
&name_is_string, &name_properties,
&explicit_phandles,
&phandle_references, &path_references,
@@ -511,10 +561,7 @@
&obsolete_chosen_interrupt_controller,
};
-int check_semantics(struct node *dt, int outversion, int boot_cpuid_phys);
-
-void process_checks(int force, struct boot_info *bi,
- int checkflag, int outversion, int boot_cpuid_phys)
+void process_checks(int force, struct boot_info *bi)
{
struct node *dt = bi->dt;
int i;
@@ -537,214 +584,4 @@
"output forced\n");
}
}
-
- if (checkflag) {
- if (error) {
- fprintf(stderr, "Warning: Skipping semantic checks due to structural errors\n");
- } else {
- if (!check_semantics(bi->dt, outversion,
- boot_cpuid_phys))
- fprintf(stderr, "Warning: Input tree has semantic errors\n");
- }
- }
-}
-
-/*
- * Semantic check functions
- */
-
-#define ERRMSG(...) if (quiet < 2) fprintf(stderr, "ERROR: " __VA_ARGS__)
-#define WARNMSG(...) if (quiet < 1) fprintf(stderr, "Warning: " __VA_ARGS__)
-
-#define DO_ERR(...) do {ERRMSG(__VA_ARGS__); ok = 0; } while (0)
-
-#define CHECK_HAVE(node, propname) \
- do { \
- if (! (prop = get_property((node), (propname)))) \
- DO_ERR("Missing \"%s\" property in %s\n", (propname), \
- (node)->fullpath); \
- } while (0);
-
-#define CHECK_HAVE_WARN(node, propname) \
- do { \
- if (! (prop = get_property((node), (propname)))) \
- WARNMSG("%s has no \"%s\" property\n", \
- (node)->fullpath, (propname)); \
- } while (0)
-
-#define CHECK_HAVE_STRING(node, propname) \
- do { \
- CHECK_HAVE((node), (propname)); \
- if (prop && !data_is_one_string(prop->val)) \
- DO_ERR("\"%s\" property in %s is not a string\n", \
- (propname), (node)->fullpath); \
- } while (0)
-
-#define CHECK_HAVE_STREQ(node, propname, value) \
- do { \
- CHECK_HAVE_STRING((node), (propname)); \
- if (prop && !streq(prop->val.val, (value))) \
- DO_ERR("%s has wrong %s, %s (should be %s\n", \
- (node)->fullpath, (propname), \
- prop->val.val, (value)); \
- } while (0)
-
-#define CHECK_HAVE_ONECELL(node, propname) \
- do { \
- CHECK_HAVE((node), (propname)); \
- if (prop && (prop->val.len != sizeof(cell_t))) \
- DO_ERR("\"%s\" property in %s has wrong size %d (should be 1 cell)\n", (propname), (node)->fullpath, prop->val.len); \
- } while (0)
-
-#define CHECK_HAVE_WARN_ONECELL(node, propname) \
- do { \
- CHECK_HAVE_WARN((node), (propname)); \
- if (prop && (prop->val.len != sizeof(cell_t))) \
- DO_ERR("\"%s\" property in %s has wrong size %d (should be 1 cell)\n", (propname), (node)->fullpath, prop->val.len); \
- } while (0)
-
-#define CHECK_HAVE_WARN_PHANDLE(xnode, propname, root) \
- do { \
- struct node *ref; \
- CHECK_HAVE_WARN_ONECELL((xnode), (propname)); \
- if (prop) {\
- cell_t phandle = propval_cell(prop); \
- if ((phandle == 0) || (phandle == -1)) { \
- DO_ERR("\"%s\" property in %s contains an invalid phandle %x\n", (propname), (xnode)->fullpath, phandle); \
- } else { \
- ref = get_node_by_phandle((root), propval_cell(prop)); \
- if (! ref) \
- DO_ERR("\"%s\" property in %s refers to non-existant phandle %x\n", (propname), (xnode)->fullpath, propval_cell(prop)); \
- } \
- } \
- } while (0)
-
-#define CHECK_HAVE_WARN_STRING(node, propname) \
- do { \
- CHECK_HAVE_WARN((node), (propname)); \
- if (prop && !data_is_one_string(prop->val)) \
- DO_ERR("\"%s\" property in %s is not a string\n", \
- (propname), (node)->fullpath); \
- } while (0)
-
-static int check_root(struct node *root)
-{
- struct property *prop;
- int ok = 1;
-
- CHECK_HAVE_STRING(root, "model");
- CHECK_HAVE_WARN(root, "compatible");
-
- return ok;
-}
-
-static int check_cpus(struct node *root, int outversion, int boot_cpuid_phys)
-{
- struct node *cpus, *cpu;
- struct property *prop;
- struct node *bootcpu = NULL;
- int ok = 1;
-
- cpus = get_subnode(root, "cpus");
- if (! cpus) {
- ERRMSG("Missing /cpus node\n");
- return 0;
- }
-
- if (cpus->addr_cells != 1)
- DO_ERR("%s has bad #address-cells value %d (should be 1)\n",
- cpus->fullpath, cpus->addr_cells);
- if (cpus->size_cells != 0)
- DO_ERR("%s has bad #size-cells value %d (should be 0)\n",
- cpus->fullpath, cpus->size_cells);
-
- for_each_child(cpus, cpu) {
- CHECK_HAVE_STREQ(cpu, "device_type", "cpu");
-
- CHECK_HAVE_ONECELL(cpu, "reg");
- if (prop) {
- cell_t unitnum;
- char *eptr;
-
- unitnum = strtol(get_unitname(cpu), &eptr, 16);
- if (*eptr) {
- WARNMSG("%s has bad format unit name %s (should be CPU number\n",
- cpu->fullpath, get_unitname(cpu));
- } else if (unitnum != propval_cell(prop)) {
- WARNMSG("%s unit name \"%s\" does not match \"reg\" property <%x>\n",
- cpu->fullpath, get_unitname(cpu),
- propval_cell(prop));
- }
- }
-
-/* CHECK_HAVE_ONECELL(cpu, "d-cache-line-size"); */
-/* CHECK_HAVE_ONECELL(cpu, "i-cache-line-size"); */
- CHECK_HAVE_ONECELL(cpu, "d-cache-size");
- CHECK_HAVE_ONECELL(cpu, "i-cache-size");
-
- CHECK_HAVE_WARN_ONECELL(cpu, "clock-frequency");
- CHECK_HAVE_WARN_ONECELL(cpu, "timebase-frequency");
-
- prop = get_property(cpu, "linux,boot-cpu");
- if (prop) {
- if (prop->val.len)
- WARNMSG("\"linux,boot-cpu\" property in %s is non-empty\n",
- cpu->fullpath);
- if (bootcpu)
- DO_ERR("Multiple boot cpus (%s and %s)\n",
- bootcpu->fullpath, cpu->fullpath);
- else
- bootcpu = cpu;
- }
- }
-
- if (outversion < 2) {
- if (! bootcpu)
- WARNMSG("No cpu has \"linux,boot-cpu\" property\n");
- } else {
- if (bootcpu)
- WARNMSG("\"linux,boot-cpu\" property is deprecated in blob version 2 or higher\n");
- if (boot_cpuid_phys == 0xfeedbeef)
- WARNMSG("physical boot CPU not set. Use -b option to set\n");
- }
-
- return ok;
-}
-
-static int check_memory(struct node *root)
-{
- struct node *mem;
- struct property *prop;
- int nnodes = 0;
- int ok = 1;
-
- for_each_child(root, mem) {
- if (! strneq(mem->name, "memory", mem->basenamelen))
- continue;
-
- nnodes++;
-
- CHECK_HAVE_STREQ(mem, "device_type", "memory");
- CHECK_HAVE(mem, "reg");
- }
-
- if (nnodes == 0) {
- ERRMSG("No memory nodes\n");
- return 0;
- }
-
- return ok;
-}
-
-int check_semantics(struct node *dt, int outversion, int boot_cpuid_phys)
-{
- int ok = 1;
-
- ok = ok && check_root(dt);
- ok = ok && check_cpus(dt, outversion, boot_cpuid_phys);
- ok = ok && check_memory(dt);
- if (! ok)
- return 0;
-
- return 1;
}
diff --git a/arch/powerpc/boot/dtc-src/data.c b/arch/powerpc/boot/dtc-src/data.c
index a94718c..dd2e3d3 100644
--- a/arch/powerpc/boot/dtc-src/data.c
+++ b/arch/powerpc/boot/dtc-src/data.c
@@ -32,8 +32,6 @@
m = nm;
}
- assert(!d.val || d.asize);
-
if (d.val)
free(d.val);
}
@@ -43,9 +41,6 @@
struct data nd;
int newsize;
- /* we must start with an allocated datum */
- assert(!d.val || d.asize);
-
if (xlen == 0)
return d;
@@ -56,11 +51,8 @@
while ((d.len + xlen) > newsize)
newsize *= 2;
- nd.asize = newsize;
nd.val = xrealloc(d.val, newsize);
- assert(nd.asize >= (d.len + xlen));
-
return nd;
}
@@ -83,16 +75,11 @@
long val;
x[3] = '\0';
- x[0] = s[(*i)];
- if (x[0]) {
- x[1] = s[(*i)+1];
- if (x[1])
- x[2] = s[(*i)+2];
- }
+ strncpy(x, s + *i, 3);
val = strtol(x, &endx, 8);
- if ((endx - x) == 0)
- fprintf(stderr, "Empty \\nnn escape\n");
+
+ assert(endx > x);
(*i) += endx - x;
return val;
@@ -105,13 +92,11 @@
long val;
x[2] = '\0';
- x[0] = s[(*i)];
- if (x[0])
- x[1] = s[(*i)+1];
+ strncpy(x, s + *i, 2);
val = strtol(x, &endx, 16);
- if ((endx - x) == 0)
- fprintf(stderr, "Empty \\x escape\n");
+ if (!(endx > x))
+ die("\\x used with no following hex digits\n");
(*i) += endx - x;
return val;
@@ -182,14 +167,29 @@
return d;
}
-struct data data_copy_file(FILE *f, size_t len)
+struct data data_copy_file(FILE *f, size_t maxlen)
{
- struct data d;
+ struct data d = empty_data;
- d = data_grow_for(empty_data, len);
+ while (!feof(f) && (d.len < maxlen)) {
+ size_t chunksize, ret;
- d.len = len;
- fread(d.val, len, 1, f);
+ if (maxlen == -1)
+ chunksize = 4096;
+ else
+ chunksize = maxlen - d.len;
+
+ d = data_grow_for(d, chunksize);
+ ret = fread(d.val + d.len, 1, chunksize, f);
+
+ if (ferror(f))
+ die("Error reading file into data: %s", strerror(errno));
+
+ if (d.len + ret < d.len)
+ die("Overflow reading file into data\n");
+
+ d.len += ret;
+ }
return d;
}
@@ -247,7 +247,7 @@
struct data data_append_cell(struct data d, cell_t word)
{
- cell_t beword = cpu_to_be32(word);
+ cell_t beword = cpu_to_fdt32(word);
return data_append_data(d, &beword, sizeof(beword));
}
@@ -256,15 +256,15 @@
{
struct fdt_reserve_entry bere;
- bere.address = cpu_to_be64(re->address);
- bere.size = cpu_to_be64(re->size);
+ bere.address = cpu_to_fdt64(re->address);
+ bere.size = cpu_to_fdt64(re->size);
return data_append_data(d, &bere, sizeof(bere));
}
-struct data data_append_addr(struct data d, u64 addr)
+struct data data_append_addr(struct data d, uint64_t addr)
{
- u64 beaddr = cpu_to_be64(addr);
+ uint64_t beaddr = cpu_to_fdt64(addr);
return data_append_data(d, &beaddr, sizeof(beaddr));
}
diff --git a/arch/powerpc/boot/dtc-src/dtc-lexer.l b/arch/powerpc/boot/dtc-src/dtc-lexer.l
index c811b22..44dbfd3 100644
--- a/arch/powerpc/boot/dtc-src/dtc-lexer.l
+++ b/arch/powerpc/boot/dtc-src/dtc-lexer.l
@@ -28,6 +28,10 @@
PROPNODECHAR [a-zA-Z0-9,._+*#?@-]
PATHCHAR ({PROPNODECHAR}|[/])
LABEL [a-zA-Z_][a-zA-Z0-9_]*
+STRING \"([^\\"]|\\.)*\"
+WS [[:space:]]
+COMMENT "/*"([^*]|\*+[^*/])*\*+"/"
+LINECOMMENT "//".*\n
%{
#include "dtc.h"
@@ -52,29 +56,26 @@
DPRINT("<V1>\n"); \
BEGIN(V1); \
}
+
+static void push_input_file(const char *filename);
+static int pop_input_file(void);
%}
%%
-<*>"/include/" BEGIN(INCLUDE);
-
-<INCLUDE>\"[^"\n]*\" {
- yytext[strlen(yytext) - 1] = 0;
- if (!push_input_file(yytext + 1)) {
- /* Some unrecoverable error.*/
- exit(1);
- }
- BEGIN_DEFAULT();
+<*>"/include/"{WS}*{STRING} {
+ char *name = strchr(yytext, '\"') + 1;
+ yytext[yyleng-1] = '\0';
+ push_input_file(name);
}
-
<*><<EOF>> {
if (!pop_input_file()) {
yyterminate();
}
}
-<*>\"([^\\"]|\\.)*\" {
- yylloc.filenum = srcpos_filenum;
+<*>{STRING} {
+ yylloc.file = srcpos_file;
yylloc.first_line = yylineno;
DPRINT("String: %s\n", yytext);
yylval.data = data_copy_escape_string(yytext+1,
@@ -84,7 +85,7 @@
}
<*>"/dts-v1/" {
- yylloc.filenum = srcpos_filenum;
+ yylloc.file = srcpos_file;
yylloc.first_line = yylineno;
DPRINT("Keyword: /dts-v1/\n");
dts_version = 1;
@@ -93,7 +94,7 @@
}
<*>"/memreserve/" {
- yylloc.filenum = srcpos_filenum;
+ yylloc.file = srcpos_file;
yylloc.first_line = yylineno;
DPRINT("Keyword: /memreserve/\n");
BEGIN_DEFAULT();
@@ -101,7 +102,7 @@
}
<*>{LABEL}: {
- yylloc.filenum = srcpos_filenum;
+ yylloc.file = srcpos_file;
yylloc.first_line = yylineno;
DPRINT("Label: %s\n", yytext);
yylval.labelref = strdup(yytext);
@@ -110,7 +111,7 @@
}
<INITIAL>[bodh]# {
- yylloc.filenum = srcpos_filenum;
+ yylloc.file = srcpos_file;
yylloc.first_line = yylineno;
if (*yytext == 'b')
yylval.cbase = 2;
@@ -125,7 +126,7 @@
}
<INITIAL>[0-9a-fA-F]+ {
- yylloc.filenum = srcpos_filenum;
+ yylloc.file = srcpos_file;
yylloc.first_line = yylineno;
yylval.literal = strdup(yytext);
DPRINT("Literal: '%s'\n", yylval.literal);
@@ -133,7 +134,7 @@
}
<V1>[0-9]+|0[xX][0-9a-fA-F]+ {
- yylloc.filenum = srcpos_filenum;
+ yylloc.file = srcpos_file;
yylloc.first_line = yylineno;
yylval.literal = strdup(yytext);
DPRINT("Literal: '%s'\n", yylval.literal);
@@ -141,7 +142,7 @@
}
\&{LABEL} { /* label reference */
- yylloc.filenum = srcpos_filenum;
+ yylloc.file = srcpos_file;
yylloc.first_line = yylineno;
DPRINT("Ref: %s\n", yytext+1);
yylval.labelref = strdup(yytext+1);
@@ -149,7 +150,7 @@
}
"&{/"{PATHCHAR}+\} { /* new-style path reference */
- yylloc.filenum = srcpos_filenum;
+ yylloc.file = srcpos_file;
yylloc.first_line = yylineno;
yytext[yyleng-1] = '\0';
DPRINT("Ref: %s\n", yytext+2);
@@ -158,7 +159,7 @@
}
<INITIAL>"&/"{PATHCHAR}+ { /* old-style path reference */
- yylloc.filenum = srcpos_filenum;
+ yylloc.file = srcpos_file;
yylloc.first_line = yylineno;
DPRINT("Ref: %s\n", yytext+1);
yylval.labelref = strdup(yytext+1);
@@ -166,7 +167,7 @@
}
<BYTESTRING>[0-9a-fA-F]{2} {
- yylloc.filenum = srcpos_filenum;
+ yylloc.file = srcpos_file;
yylloc.first_line = yylineno;
yylval.byte = strtol(yytext, NULL, 16);
DPRINT("Byte: %02x\n", (int)yylval.byte);
@@ -174,7 +175,7 @@
}
<BYTESTRING>"]" {
- yylloc.filenum = srcpos_filenum;
+ yylloc.file = srcpos_file;
yylloc.first_line = yylineno;
DPRINT("/BYTESTRING\n");
BEGIN_DEFAULT();
@@ -182,7 +183,7 @@
}
<PROPNODENAME>{PROPNODECHAR}+ {
- yylloc.filenum = srcpos_filenum;
+ yylloc.file = srcpos_file;
yylloc.first_line = yylineno;
DPRINT("PropNodeName: %s\n", yytext);
yylval.propnodename = strdup(yytext);
@@ -190,20 +191,19 @@
return DT_PROPNODENAME;
}
-
-<*>[[:space:]]+ /* eat whitespace */
-
-<*>"/*"([^*]|\*+[^*/])*\*+"/" {
- yylloc.filenum = srcpos_filenum;
+"/incbin/" {
+ yylloc.file = srcpos_file;
yylloc.first_line = yylineno;
- DPRINT("Comment: %s\n", yytext);
- /* eat comments */
+ DPRINT("Binary Include\n");
+ return DT_INCBIN;
}
-<*>"//".*\n /* eat line comments */
+<*>{WS}+ /* eat whitespace */
+<*>{COMMENT}+ /* eat C-style comments */
+<*>{LINECOMMENT}+ /* eat C++-style comments */
<*>. {
- yylloc.filenum = srcpos_filenum;
+ yylloc.file = srcpos_file;
yylloc.first_line = yylineno;
DPRINT("Char: %c (\\x%02x)\n", yytext[0],
(unsigned)yytext[0]);
@@ -227,14 +227,13 @@
*/
struct incl_file {
- int filenum;
- FILE *file;
+ struct dtc_file *file;
YY_BUFFER_STATE yy_prev_buf;
int yy_prev_lineno;
struct incl_file *prev;
};
-struct incl_file *incl_file_stack;
+static struct incl_file *incl_file_stack;
/*
@@ -245,36 +244,34 @@
static int incl_depth = 0;
-int push_input_file(const char *filename)
+static void push_input_file(const char *filename)
{
- FILE *f;
struct incl_file *incl_file;
+ struct dtc_file *newfile;
+ struct search_path search, *searchptr = NULL;
- if (!filename) {
- yyerror("No include file name given.");
- return 0;
+ assert(filename);
+
+ if (incl_depth++ >= MAX_INCLUDE_DEPTH)
+ die("Includes nested too deeply");
+
+ if (srcpos_file) {
+ search.dir = srcpos_file->dir;
+ search.next = NULL;
+ search.prev = NULL;
+ searchptr = &search;
}
- if (incl_depth++ >= MAX_INCLUDE_DEPTH) {
- yyerror("Includes nested too deeply");
- return 0;
- }
+ newfile = dtc_open_file(filename, searchptr);
- f = dtc_open_file(filename);
-
- incl_file = malloc(sizeof(struct incl_file));
- if (!incl_file) {
- yyerror("Can not allocate include file space.");
- return 0;
- }
+ incl_file = xmalloc(sizeof(struct incl_file));
/*
* Save current context.
*/
incl_file->yy_prev_buf = YY_CURRENT_BUFFER;
incl_file->yy_prev_lineno = yylineno;
- incl_file->filenum = srcpos_filenum;
- incl_file->file = yyin;
+ incl_file->file = srcpos_file;
incl_file->prev = incl_file_stack;
incl_file_stack = incl_file;
@@ -282,23 +279,21 @@
/*
* Establish new context.
*/
- srcpos_filenum = lookup_file_name(filename, 0);
+ srcpos_file = newfile;
yylineno = 1;
- yyin = f;
+ yyin = newfile->file;
yy_switch_to_buffer(yy_create_buffer(yyin, YY_BUF_SIZE));
-
- return 1;
}
-int pop_input_file(void)
+static int pop_input_file(void)
{
struct incl_file *incl_file;
if (incl_file_stack == 0)
return 0;
- fclose(yyin);
+ dtc_close_file(srcpos_file);
/*
* Pop.
@@ -313,16 +308,13 @@
yy_delete_buffer(YY_CURRENT_BUFFER);
yy_switch_to_buffer(incl_file->yy_prev_buf);
yylineno = incl_file->yy_prev_lineno;
- srcpos_filenum = incl_file->filenum;
- yyin = incl_file->file;
+ srcpos_file = incl_file->file;
+ yyin = incl_file->file ? incl_file->file->file : NULL;
/*
* Free old state.
*/
free(incl_file);
- if (YY_CURRENT_BUFFER == 0)
- return 0;
-
return 1;
}
diff --git a/arch/powerpc/boot/dtc-src/dtc-lexer.lex.c_shipped b/arch/powerpc/boot/dtc-src/dtc-lexer.lex.c_shipped
index d0f7424..ac392cb 100644
--- a/arch/powerpc/boot/dtc-src/dtc-lexer.lex.c_shipped
+++ b/arch/powerpc/boot/dtc-src/dtc-lexer.lex.c_shipped
@@ -9,7 +9,7 @@
#define FLEX_SCANNER
#define YY_FLEX_MAJOR_VERSION 2
#define YY_FLEX_MINOR_VERSION 5
-#define YY_FLEX_SUBMINOR_VERSION 33
+#define YY_FLEX_SUBMINOR_VERSION 34
#if YY_FLEX_SUBMINOR_VERSION > 0
#define FLEX_BETA
#endif
@@ -31,7 +31,7 @@
/* C99 systems have <inttypes.h>. Non-C99 systems may or may not. */
-#if __STDC_VERSION__ >= 199901L
+#if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L
/* C99 says to define __STDC_LIMIT_MACROS before including stdint.h,
* if you want the limit (max/min) macros for int types.
@@ -94,11 +94,12 @@
#else /* ! __cplusplus */
-#if __STDC__
+/* C99 requires __STDC__ to be defined as 1. */
+#if defined (__STDC__)
#define YY_USE_CONST
-#endif /* __STDC__ */
+#endif /* defined (__STDC__) */
#endif /* ! __cplusplus */
#ifdef YY_USE_CONST
@@ -194,11 +195,13 @@
/* The following is because we cannot portably get our hands on size_t
* (without autoconf's help, which isn't available because we want
* flex-generated scanners to compile on their own).
+ * Given that the standard has decreed that size_t exists since 1989,
+ * I guess we can afford to depend on it. Manoj.
*/
#ifndef YY_TYPEDEF_YY_SIZE_T
#define YY_TYPEDEF_YY_SIZE_T
-typedef unsigned int yy_size_t;
+typedef size_t yy_size_t;
#endif
#ifndef YY_STRUCT_YY_BUFFER_STATE
@@ -349,7 +352,7 @@
/* Begin user sect3 */
-#define yywrap() 1
+#define yywrap(n) 1
#define YY_SKIP_YYWRAP
typedef unsigned char YY_CHAR;
@@ -389,19 +392,20 @@
flex_int32_t yy_verify;
flex_int32_t yy_nxt;
};
-static yyconst flex_int16_t yy_accept[94] =
+static yyconst flex_int16_t yy_accept[104] =
{ 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 21, 19, 16, 16, 19, 19, 19, 8, 8, 19,
- 8, 19, 19, 19, 19, 14, 15, 15, 19, 9,
- 9, 16, 0, 3, 0, 0, 10, 0, 0, 0,
- 0, 0, 0, 8, 8, 6, 0, 7, 0, 2,
- 0, 13, 13, 15, 15, 9, 0, 12, 10, 0,
- 0, 0, 0, 18, 0, 0, 0, 2, 9, 0,
- 17, 0, 0, 0, 11, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 4, 0, 0, 1, 0, 0,
- 0, 5, 0
+ 21, 19, 16, 16, 19, 19, 19, 7, 7, 19,
+ 7, 19, 19, 19, 19, 13, 14, 14, 19, 8,
+ 8, 16, 0, 2, 0, 0, 9, 0, 0, 0,
+ 0, 0, 0, 7, 7, 5, 0, 6, 0, 12,
+ 12, 14, 14, 8, 0, 11, 9, 0, 0, 0,
+ 0, 18, 0, 0, 0, 0, 8, 0, 17, 0,
+ 0, 0, 0, 0, 10, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 3, 15,
+ 0, 0, 0, 0, 0, 0, 0, 0, 1, 0,
+ 0, 4, 0
} ;
static yyconst flex_int32_t yy_ec[256] =
@@ -444,122 +448,126 @@
7, 7, 7, 8, 1
} ;
-static yyconst flex_int16_t yy_base[107] =
+static yyconst flex_int16_t yy_base[117] =
{ 0,
- 0, 0, 32, 0, 53, 0, 76, 0, 108, 111,
- 280, 288, 37, 39, 33, 36, 106, 0, 123, 146,
- 255, 251, 45, 0, 159, 288, 0, 53, 108, 172,
- 114, 127, 158, 288, 245, 0, 0, 234, 235, 236,
- 197, 195, 199, 0, 0, 288, 0, 288, 160, 288,
- 183, 288, 0, 0, 183, 182, 0, 0, 0, 0,
- 204, 189, 207, 288, 179, 187, 180, 194, 0, 171,
- 288, 196, 178, 174, 288, 169, 169, 177, 165, 153,
- 143, 155, 137, 118, 288, 122, 42, 288, 36, 36,
- 40, 288, 288, 212, 218, 223, 229, 234, 239, 245,
+ 0, 0, 30, 0, 44, 0, 67, 0, 97, 105,
+ 302, 303, 35, 44, 40, 94, 112, 0, 129, 152,
+ 296, 295, 159, 0, 176, 303, 0, 116, 95, 165,
+ 49, 46, 102, 303, 296, 0, 0, 288, 290, 293,
+ 264, 266, 270, 0, 0, 303, 0, 303, 264, 303,
+ 0, 0, 195, 101, 0, 0, 0, 0, 284, 125,
+ 277, 265, 225, 230, 216, 218, 0, 202, 224, 221,
+ 217, 107, 196, 188, 303, 206, 179, 186, 178, 185,
+ 183, 162, 161, 150, 169, 160, 145, 125, 303, 303,
+ 137, 109, 190, 103, 203, 167, 108, 197, 303, 123,
- 251, 255, 262, 270, 275, 280
+ 29, 303, 303, 215, 221, 226, 229, 234, 240, 246,
+ 250, 257, 265, 270, 275, 282
} ;
-static yyconst flex_int16_t yy_def[107] =
+static yyconst flex_int16_t yy_def[117] =
{ 0,
- 93, 1, 1, 3, 3, 5, 93, 7, 3, 3,
- 93, 93, 93, 93, 94, 95, 93, 96, 93, 19,
- 19, 20, 97, 98, 20, 93, 99, 100, 95, 93,
- 93, 93, 94, 93, 94, 101, 102, 93, 103, 104,
- 93, 93, 93, 96, 19, 93, 20, 93, 97, 93,
- 97, 93, 20, 99, 100, 93, 105, 101, 102, 106,
- 103, 103, 104, 93, 93, 93, 93, 94, 105, 106,
- 93, 93, 93, 93, 93, 93, 93, 93, 93, 93,
- 93, 93, 93, 93, 93, 93, 93, 93, 93, 93,
- 93, 93, 0, 93, 93, 93, 93, 93, 93, 93,
+ 103, 1, 1, 3, 3, 5, 103, 7, 3, 3,
+ 103, 103, 103, 103, 104, 105, 103, 106, 103, 19,
+ 19, 20, 103, 107, 20, 103, 108, 109, 105, 103,
+ 103, 103, 104, 103, 104, 110, 111, 103, 112, 113,
+ 103, 103, 103, 106, 19, 103, 20, 103, 103, 103,
+ 20, 108, 109, 103, 114, 110, 111, 115, 112, 112,
+ 113, 103, 103, 103, 103, 103, 114, 115, 103, 103,
+ 103, 103, 103, 103, 103, 103, 103, 103, 103, 103,
+ 103, 103, 103, 103, 103, 103, 103, 103, 103, 103,
+ 103, 103, 103, 103, 103, 116, 103, 116, 103, 116,
- 93, 93, 93, 93, 93, 93
+ 103, 103, 0, 103, 103, 103, 103, 103, 103, 103,
+ 103, 103, 103, 103, 103, 103
} ;
-static yyconst flex_int16_t yy_nxt[324] =
+static yyconst flex_int16_t yy_nxt[339] =
{ 0,
12, 13, 14, 15, 12, 16, 12, 12, 12, 17,
18, 18, 18, 12, 19, 20, 20, 12, 12, 21,
19, 21, 19, 22, 20, 20, 20, 20, 20, 20,
- 20, 20, 20, 12, 12, 23, 34, 12, 32, 32,
- 32, 32, 12, 12, 12, 36, 20, 33, 50, 92,
- 35, 20, 20, 20, 20, 20, 15, 54, 91, 54,
- 54, 54, 51, 24, 24, 24, 46, 25, 90, 38,
- 89, 26, 25, 25, 25, 25, 12, 13, 14, 15,
- 27, 12, 27, 27, 27, 17, 27, 27, 27, 12,
- 28, 28, 28, 12, 12, 28, 28, 28, 28, 28,
+ 20, 20, 20, 12, 12, 12, 32, 32, 102, 23,
+ 12, 12, 12, 34, 20, 32, 32, 32, 32, 20,
+ 20, 20, 20, 20, 24, 24, 24, 35, 25, 54,
+ 54, 54, 26, 25, 25, 25, 25, 12, 13, 14,
+ 15, 27, 12, 27, 27, 27, 23, 27, 27, 27,
+ 12, 28, 28, 28, 12, 12, 28, 28, 28, 28,
+ 28, 28, 28, 28, 28, 28, 28, 28, 28, 28,
- 28, 28, 28, 28, 28, 28, 28, 28, 28, 12,
- 12, 15, 39, 29, 15, 40, 29, 93, 30, 31,
- 31, 30, 31, 31, 56, 56, 56, 41, 32, 32,
- 42, 88, 43, 45, 45, 45, 46, 45, 47, 47,
- 87, 38, 45, 45, 45, 45, 47, 47, 47, 47,
- 47, 47, 47, 47, 47, 47, 47, 47, 47, 86,
- 47, 34, 33, 50, 85, 47, 47, 47, 47, 53,
- 53, 53, 84, 53, 83, 35, 82, 51, 53, 53,
- 53, 53, 56, 56, 56, 93, 68, 54, 57, 54,
- 54, 54, 56, 56, 56, 62, 46, 34, 71, 81,
+ 12, 12, 29, 36, 103, 34, 17, 30, 31, 31,
+ 29, 54, 54, 54, 17, 30, 31, 31, 39, 35,
+ 52, 40, 52, 52, 52, 103, 78, 38, 38, 46,
+ 101, 60, 79, 41, 69, 97, 42, 94, 43, 45,
+ 45, 45, 46, 45, 47, 47, 93, 92, 45, 45,
+ 45, 45, 47, 47, 47, 47, 47, 47, 47, 47,
+ 47, 47, 47, 47, 47, 39, 47, 91, 40, 90,
+ 99, 47, 47, 47, 47, 54, 54, 54, 89, 88,
+ 41, 55, 87, 49, 100, 43, 51, 51, 51, 86,
+ 51, 95, 95, 96, 85, 51, 51, 51, 51, 52,
- 80, 79, 78, 77, 76, 75, 74, 73, 72, 64,
- 62, 35, 33, 33, 33, 33, 33, 33, 33, 33,
- 37, 67, 66, 37, 37, 37, 44, 65, 44, 49,
- 49, 49, 49, 49, 49, 49, 49, 52, 64, 52,
- 54, 62, 54, 60, 54, 54, 55, 93, 55, 55,
- 55, 55, 58, 58, 58, 48, 58, 58, 59, 48,
- 59, 59, 61, 61, 61, 61, 61, 61, 61, 61,
- 63, 63, 63, 63, 63, 63, 63, 63, 69, 93,
- 69, 70, 70, 70, 93, 70, 70, 11, 93, 93,
- 93, 93, 93, 93, 93, 93, 93, 93, 93, 93,
+ 99, 52, 52, 52, 95, 95, 96, 84, 46, 83,
+ 82, 81, 39, 79, 100, 33, 33, 33, 33, 33,
+ 33, 33, 33, 37, 80, 77, 37, 37, 37, 44,
+ 40, 44, 50, 76, 50, 52, 75, 52, 74, 52,
+ 52, 53, 73, 53, 53, 53, 53, 56, 56, 56,
+ 72, 56, 56, 57, 71, 57, 57, 59, 59, 59,
+ 59, 59, 59, 59, 59, 61, 61, 61, 61, 61,
+ 61, 61, 61, 67, 70, 67, 68, 68, 68, 62,
+ 68, 68, 98, 98, 98, 98, 98, 98, 98, 98,
+ 60, 66, 65, 64, 63, 62, 60, 58, 103, 48,
- 93, 93, 93, 93, 93, 93, 93, 93, 93, 93,
- 93, 93, 93, 93, 93, 93, 93, 93, 93, 93,
- 93, 93, 93
+ 48, 103, 11, 103, 103, 103, 103, 103, 103, 103,
+ 103, 103, 103, 103, 103, 103, 103, 103, 103, 103,
+ 103, 103, 103, 103, 103, 103, 103, 103, 103, 103,
+ 103, 103, 103, 103, 103, 103, 103, 103
} ;
-static yyconst flex_int16_t yy_chk[324] =
+static yyconst flex_int16_t yy_chk[339] =
{ 0,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 3, 15, 3, 13, 13,
- 14, 14, 3, 3, 3, 16, 3, 23, 23, 91,
- 15, 3, 3, 3, 3, 3, 5, 28, 90, 28,
- 28, 28, 23, 5, 5, 5, 28, 5, 89, 16,
- 87, 5, 5, 5, 5, 5, 7, 7, 7, 7,
+ 1, 1, 1, 1, 1, 3, 13, 13, 101, 3,
+ 3, 3, 3, 15, 3, 14, 14, 32, 32, 3,
+ 3, 3, 3, 3, 5, 5, 5, 15, 5, 31,
+ 31, 31, 5, 5, 5, 5, 5, 7, 7, 7,
+ 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
- 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
- 7, 9, 17, 9, 10, 17, 10, 29, 9, 9,
- 9, 10, 10, 10, 31, 31, 31, 17, 32, 32,
- 17, 86, 17, 19, 19, 19, 19, 19, 19, 19,
- 84, 29, 19, 19, 19, 19, 19, 19, 19, 19,
- 19, 19, 19, 19, 19, 19, 20, 20, 20, 83,
- 20, 33, 49, 49, 82, 20, 20, 20, 20, 25,
- 25, 25, 81, 25, 80, 33, 79, 49, 25, 25,
- 25, 25, 30, 30, 30, 51, 51, 55, 30, 55,
- 55, 55, 56, 56, 56, 62, 55, 68, 62, 78,
+ 7, 7, 9, 16, 29, 33, 9, 9, 9, 9,
+ 10, 54, 54, 54, 10, 10, 10, 10, 17, 33,
+ 28, 17, 28, 28, 28, 100, 72, 16, 29, 28,
+ 97, 60, 72, 17, 60, 94, 17, 92, 17, 19,
+ 19, 19, 19, 19, 19, 19, 91, 88, 19, 19,
+ 19, 19, 19, 19, 19, 19, 19, 19, 19, 19,
+ 19, 19, 20, 20, 20, 23, 20, 87, 23, 86,
+ 96, 20, 20, 20, 20, 30, 30, 30, 85, 84,
+ 23, 30, 83, 23, 96, 23, 25, 25, 25, 82,
+ 25, 93, 93, 93, 81, 25, 25, 25, 25, 53,
- 77, 76, 74, 73, 72, 70, 67, 66, 65, 63,
- 61, 68, 94, 94, 94, 94, 94, 94, 94, 94,
- 95, 43, 42, 95, 95, 95, 96, 41, 96, 97,
- 97, 97, 97, 97, 97, 97, 97, 98, 40, 98,
- 99, 39, 99, 38, 99, 99, 100, 35, 100, 100,
- 100, 100, 101, 101, 101, 22, 101, 101, 102, 21,
- 102, 102, 103, 103, 103, 103, 103, 103, 103, 103,
- 104, 104, 104, 104, 104, 104, 104, 104, 105, 11,
- 105, 106, 106, 106, 0, 106, 106, 93, 93, 93,
- 93, 93, 93, 93, 93, 93, 93, 93, 93, 93,
+ 98, 53, 53, 53, 95, 95, 95, 80, 53, 79,
+ 78, 77, 76, 74, 98, 104, 104, 104, 104, 104,
+ 104, 104, 104, 105, 73, 71, 105, 105, 105, 106,
+ 70, 106, 107, 69, 107, 108, 68, 108, 66, 108,
+ 108, 109, 65, 109, 109, 109, 109, 110, 110, 110,
+ 64, 110, 110, 111, 63, 111, 111, 112, 112, 112,
+ 112, 112, 112, 112, 112, 113, 113, 113, 113, 113,
+ 113, 113, 113, 114, 62, 114, 115, 115, 115, 61,
+ 115, 115, 116, 116, 116, 116, 116, 116, 116, 116,
+ 59, 49, 43, 42, 41, 40, 39, 38, 35, 22,
- 93, 93, 93, 93, 93, 93, 93, 93, 93, 93,
- 93, 93, 93, 93, 93, 93, 93, 93, 93, 93,
- 93, 93, 93
+ 21, 11, 103, 103, 103, 103, 103, 103, 103, 103,
+ 103, 103, 103, 103, 103, 103, 103, 103, 103, 103,
+ 103, 103, 103, 103, 103, 103, 103, 103, 103, 103,
+ 103, 103, 103, 103, 103, 103, 103, 103
} ;
/* Table of booleans, true if rule could match eol. */
static yyconst flex_int32_t yy_rule_can_match_eol[21] =
{ 0,
-0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0,
+1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0,
0, };
static yy_state_type yy_last_accepting_state;
@@ -600,7 +608,7 @@
-#line 33 "dtc-lexer.l"
+#line 37 "dtc-lexer.l"
#include "dtc.h"
#include "srcpos.h"
#include "dtc-parser.tab.h"
@@ -623,7 +631,10 @@
DPRINT("<V1>\n"); \
BEGIN(V1); \
}
-#line 627 "dtc-lexer.lex.c"
+
+static void push_input_file(const char *filename);
+static int pop_input_file(void);
+#line 638 "dtc-lexer.lex.c"
#define INITIAL 0
#define INCLUDE 1
@@ -685,7 +696,7 @@
/* This used to be an fputs(), but since the string might contain NUL's,
* we now use fwrite().
*/
-#define ECHO (void) fwrite( yytext, yyleng, 1, yyout )
+#define ECHO fwrite( yytext, yyleng, 1, yyout )
#endif
/* Gets input and stuffs it into "buf". number of characters read, or YY_NULL,
@@ -696,7 +707,7 @@
if ( YY_CURRENT_BUFFER_LVALUE->yy_is_interactive ) \
{ \
int c = '*'; \
- size_t n; \
+ int n; \
for ( n = 0; n < max_size && \
(c = getc( yyin )) != EOF && c != '\n'; ++n ) \
buf[n] = (char) c; \
@@ -778,9 +789,9 @@
register char *yy_cp, *yy_bp;
register int yy_act;
-#line 57 "dtc-lexer.l"
+#line 64 "dtc-lexer.l"
-#line 784 "dtc-lexer.lex.c"
+#line 795 "dtc-lexer.lex.c"
if ( !(yy_init) )
{
@@ -833,13 +844,13 @@
while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
{
yy_current_state = (int) yy_def[yy_current_state];
- if ( yy_current_state >= 94 )
+ if ( yy_current_state >= 104 )
yy_c = yy_meta[(unsigned int) yy_c];
}
yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
++yy_cp;
}
- while ( yy_base[yy_current_state] != 288 );
+ while ( yy_base[yy_current_state] != 303 );
yy_find_action:
yy_act = yy_accept[yy_current_state];
@@ -874,20 +885,13 @@
goto yy_find_action;
case 1:
+/* rule 1 can match eol */
YY_RULE_SETUP
-#line 58 "dtc-lexer.l"
-BEGIN(INCLUDE);
- YY_BREAK
-case 2:
-YY_RULE_SETUP
-#line 60 "dtc-lexer.l"
+#line 65 "dtc-lexer.l"
{
- yytext[strlen(yytext) - 1] = 0;
- if (!push_input_file(yytext + 1)) {
- /* Some unrecoverable error.*/
- exit(1);
- }
- BEGIN_DEFAULT();
+ char *name = strchr(yytext, '\"') + 1;
+ yytext[yyleng-1] = '\0';
+ push_input_file(name);
}
YY_BREAK
case YY_STATE_EOF(INITIAL):
@@ -895,19 +899,19 @@
case YY_STATE_EOF(BYTESTRING):
case YY_STATE_EOF(PROPNODENAME):
case YY_STATE_EOF(V1):
-#line 70 "dtc-lexer.l"
+#line 71 "dtc-lexer.l"
{
if (!pop_input_file()) {
yyterminate();
}
}
YY_BREAK
-case 3:
-/* rule 3 can match eol */
+case 2:
+/* rule 2 can match eol */
YY_RULE_SETUP
-#line 76 "dtc-lexer.l"
+#line 77 "dtc-lexer.l"
{
- yylloc.filenum = srcpos_filenum;
+ yylloc.file = srcpos_file;
yylloc.first_line = yylineno;
DPRINT("String: %s\n", yytext);
yylval.data = data_copy_escape_string(yytext+1,
@@ -916,11 +920,11 @@
return DT_STRING;
}
YY_BREAK
-case 4:
+case 3:
YY_RULE_SETUP
-#line 86 "dtc-lexer.l"
+#line 87 "dtc-lexer.l"
{
- yylloc.filenum = srcpos_filenum;
+ yylloc.file = srcpos_file;
yylloc.first_line = yylineno;
DPRINT("Keyword: /dts-v1/\n");
dts_version = 1;
@@ -928,22 +932,22 @@
return DT_V1;
}
YY_BREAK
-case 5:
+case 4:
YY_RULE_SETUP
-#line 95 "dtc-lexer.l"
+#line 96 "dtc-lexer.l"
{
- yylloc.filenum = srcpos_filenum;
+ yylloc.file = srcpos_file;
yylloc.first_line = yylineno;
DPRINT("Keyword: /memreserve/\n");
BEGIN_DEFAULT();
return DT_MEMRESERVE;
}
YY_BREAK
-case 6:
+case 5:
YY_RULE_SETUP
-#line 103 "dtc-lexer.l"
+#line 104 "dtc-lexer.l"
{
- yylloc.filenum = srcpos_filenum;
+ yylloc.file = srcpos_file;
yylloc.first_line = yylineno;
DPRINT("Label: %s\n", yytext);
yylval.labelref = strdup(yytext);
@@ -951,11 +955,11 @@
return DT_LABEL;
}
YY_BREAK
-case 7:
+case 6:
YY_RULE_SETUP
-#line 112 "dtc-lexer.l"
+#line 113 "dtc-lexer.l"
{
- yylloc.filenum = srcpos_filenum;
+ yylloc.file = srcpos_file;
yylloc.first_line = yylineno;
if (*yytext == 'b')
yylval.cbase = 2;
@@ -969,44 +973,44 @@
return DT_BASE;
}
YY_BREAK
-case 8:
+case 7:
YY_RULE_SETUP
-#line 127 "dtc-lexer.l"
+#line 128 "dtc-lexer.l"
{
- yylloc.filenum = srcpos_filenum;
+ yylloc.file = srcpos_file;
yylloc.first_line = yylineno;
yylval.literal = strdup(yytext);
DPRINT("Literal: '%s'\n", yylval.literal);
return DT_LEGACYLITERAL;
}
YY_BREAK
-case 9:
+case 8:
YY_RULE_SETUP
-#line 135 "dtc-lexer.l"
+#line 136 "dtc-lexer.l"
{
- yylloc.filenum = srcpos_filenum;
+ yylloc.file = srcpos_file;
yylloc.first_line = yylineno;
yylval.literal = strdup(yytext);
DPRINT("Literal: '%s'\n", yylval.literal);
return DT_LITERAL;
}
YY_BREAK
-case 10:
+case 9:
YY_RULE_SETUP
-#line 143 "dtc-lexer.l"
+#line 144 "dtc-lexer.l"
{ /* label reference */
- yylloc.filenum = srcpos_filenum;
+ yylloc.file = srcpos_file;
yylloc.first_line = yylineno;
DPRINT("Ref: %s\n", yytext+1);
yylval.labelref = strdup(yytext+1);
return DT_REF;
}
YY_BREAK
-case 11:
+case 10:
YY_RULE_SETUP
-#line 151 "dtc-lexer.l"
+#line 152 "dtc-lexer.l"
{ /* new-style path reference */
- yylloc.filenum = srcpos_filenum;
+ yylloc.file = srcpos_file;
yylloc.first_line = yylineno;
yytext[yyleng-1] = '\0';
DPRINT("Ref: %s\n", yytext+2);
@@ -1014,44 +1018,44 @@
return DT_REF;
}
YY_BREAK
-case 12:
+case 11:
YY_RULE_SETUP
-#line 160 "dtc-lexer.l"
+#line 161 "dtc-lexer.l"
{ /* old-style path reference */
- yylloc.filenum = srcpos_filenum;
+ yylloc.file = srcpos_file;
yylloc.first_line = yylineno;
DPRINT("Ref: %s\n", yytext+1);
yylval.labelref = strdup(yytext+1);
return DT_REF;
}
YY_BREAK
-case 13:
+case 12:
YY_RULE_SETUP
-#line 168 "dtc-lexer.l"
+#line 169 "dtc-lexer.l"
{
- yylloc.filenum = srcpos_filenum;
+ yylloc.file = srcpos_file;
yylloc.first_line = yylineno;
yylval.byte = strtol(yytext, NULL, 16);
DPRINT("Byte: %02x\n", (int)yylval.byte);
return DT_BYTE;
}
YY_BREAK
-case 14:
+case 13:
YY_RULE_SETUP
-#line 176 "dtc-lexer.l"
+#line 177 "dtc-lexer.l"
{
- yylloc.filenum = srcpos_filenum;
+ yylloc.file = srcpos_file;
yylloc.first_line = yylineno;
DPRINT("/BYTESTRING\n");
BEGIN_DEFAULT();
return ']';
}
YY_BREAK
-case 15:
+case 14:
YY_RULE_SETUP
-#line 184 "dtc-lexer.l"
+#line 185 "dtc-lexer.l"
{
- yylloc.filenum = srcpos_filenum;
+ yylloc.file = srcpos_file;
yylloc.first_line = yylineno;
DPRINT("PropNodeName: %s\n", yytext);
yylval.propnodename = strdup(yytext);
@@ -1059,34 +1063,39 @@
return DT_PROPNODENAME;
}
YY_BREAK
+case 15:
+YY_RULE_SETUP
+#line 194 "dtc-lexer.l"
+{
+ yylloc.file = srcpos_file;
+ yylloc.first_line = yylineno;
+ DPRINT("Binary Include\n");
+ return DT_INCBIN;
+ }
+ YY_BREAK
case 16:
/* rule 16 can match eol */
YY_RULE_SETUP
-#line 194 "dtc-lexer.l"
+#line 201 "dtc-lexer.l"
/* eat whitespace */
YY_BREAK
case 17:
/* rule 17 can match eol */
YY_RULE_SETUP
-#line 196 "dtc-lexer.l"
-{
- yylloc.filenum = srcpos_filenum;
- yylloc.first_line = yylineno;
- DPRINT("Comment: %s\n", yytext);
- /* eat comments */
- }
+#line 202 "dtc-lexer.l"
+/* eat C-style comments */
YY_BREAK
case 18:
/* rule 18 can match eol */
YY_RULE_SETUP
#line 203 "dtc-lexer.l"
-/* eat line comments */
+/* eat C++-style comments */
YY_BREAK
case 19:
YY_RULE_SETUP
#line 205 "dtc-lexer.l"
{
- yylloc.filenum = srcpos_filenum;
+ yylloc.file = srcpos_file;
yylloc.first_line = yylineno;
DPRINT("Char: %c (\\x%02x)\n", yytext[0],
(unsigned)yytext[0]);
@@ -1107,7 +1116,7 @@
#line 222 "dtc-lexer.l"
ECHO;
YY_BREAK
-#line 1111 "dtc-lexer.lex.c"
+#line 1120 "dtc-lexer.lex.c"
case YY_END_OF_BUFFER:
{
@@ -1360,6 +1369,14 @@
else
ret_val = EOB_ACT_CONTINUE_SCAN;
+ if ((yy_size_t) ((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) {
+ /* Extend the array by 50%, plus the number we really need. */
+ yy_size_t new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1);
+ YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char *) yyrealloc((void *) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf,new_size );
+ if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf )
+ YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" );
+ }
+
(yy_n_chars) += number_to_move;
YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR;
YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR;
@@ -1389,7 +1406,7 @@
while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
{
yy_current_state = (int) yy_def[yy_current_state];
- if ( yy_current_state >= 94 )
+ if ( yy_current_state >= 104 )
yy_c = yy_meta[(unsigned int) yy_c];
}
yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
@@ -1417,11 +1434,11 @@
while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
{
yy_current_state = (int) yy_def[yy_current_state];
- if ( yy_current_state >= 94 )
+ if ( yy_current_state >= 104 )
yy_c = yy_meta[(unsigned int) yy_c];
}
yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
- yy_is_jam = (yy_current_state == 93);
+ yy_is_jam = (yy_current_state == 103);
return yy_is_jam ? 0 : yy_current_state;
}
@@ -1743,7 +1760,9 @@
(yy_buffer_stack) = (struct yy_buffer_state**)yyalloc
(num_to_alloc * sizeof(struct yy_buffer_state*)
);
-
+ if ( ! (yy_buffer_stack) )
+ YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" );
+
memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*));
(yy_buffer_stack_max) = num_to_alloc;
@@ -1761,6 +1780,8 @@
((yy_buffer_stack),
num_to_alloc * sizeof(struct yy_buffer_state*)
);
+ if ( ! (yy_buffer_stack) )
+ YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" );
/* zero only the new slots.*/
memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*));
@@ -2072,14 +2093,13 @@
*/
struct incl_file {
- int filenum;
- FILE *file;
+ struct dtc_file *file;
YY_BUFFER_STATE yy_prev_buf;
int yy_prev_lineno;
struct incl_file *prev;
};
-struct incl_file *incl_file_stack;
+static struct incl_file *incl_file_stack;
/*
@@ -2090,36 +2110,34 @@
static int incl_depth = 0;
-int push_input_file(const char *filename)
+static void push_input_file(const char *filename)
{
- FILE *f;
struct incl_file *incl_file;
+ struct dtc_file *newfile;
+ struct search_path search, *searchptr = NULL;
- if (!filename) {
- yyerror("No include file name given.");
- return 0;
+ assert(filename);
+
+ if (incl_depth++ >= MAX_INCLUDE_DEPTH)
+ die("Includes nested too deeply");
+
+ if (srcpos_file) {
+ search.dir = srcpos_file->dir;
+ search.next = NULL;
+ search.prev = NULL;
+ searchptr = &search;
}
- if (incl_depth++ >= MAX_INCLUDE_DEPTH) {
- yyerror("Includes nested too deeply");
- return 0;
- }
+ newfile = dtc_open_file(filename, searchptr);
- f = dtc_open_file(filename);
-
- incl_file = malloc(sizeof(struct incl_file));
- if (!incl_file) {
- yyerror("Can not allocate include file space.");
- return 0;
- }
+ incl_file = xmalloc(sizeof(struct incl_file));
/*
* Save current context.
*/
incl_file->yy_prev_buf = YY_CURRENT_BUFFER;
incl_file->yy_prev_lineno = yylineno;
- incl_file->filenum = srcpos_filenum;
- incl_file->file = yyin;
+ incl_file->file = srcpos_file;
incl_file->prev = incl_file_stack;
incl_file_stack = incl_file;
@@ -2127,23 +2145,21 @@
/*
* Establish new context.
*/
- srcpos_filenum = lookup_file_name(filename, 0);
+ srcpos_file = newfile;
yylineno = 1;
- yyin = f;
+ yyin = newfile->file;
yy_switch_to_buffer(yy_create_buffer(yyin,YY_BUF_SIZE));
-
- return 1;
}
-int pop_input_file(void)
+static int pop_input_file(void)
{
struct incl_file *incl_file;
if (incl_file_stack == 0)
return 0;
- fclose(yyin);
+ dtc_close_file(srcpos_file);
/*
* Pop.
@@ -2158,17 +2174,14 @@
yy_delete_buffer(YY_CURRENT_BUFFER);
yy_switch_to_buffer(incl_file->yy_prev_buf);
yylineno = incl_file->yy_prev_lineno;
- srcpos_filenum = incl_file->filenum;
- yyin = incl_file->file;
+ srcpos_file = incl_file->file;
+ yyin = incl_file->file ? incl_file->file->file : NULL;
/*
* Free old state.
*/
free(incl_file);
- if (YY_CURRENT_BUFFER == 0)
- return 0;
-
return 1;
}
diff --git a/arch/powerpc/boot/dtc-src/dtc-parser.tab.c_shipped b/arch/powerpc/boot/dtc-src/dtc-parser.tab.c_shipped
index 28e6ec02..2712937 100644
--- a/arch/powerpc/boot/dtc-src/dtc-parser.tab.c_shipped
+++ b/arch/powerpc/boot/dtc-src/dtc-parser.tab.c_shipped
@@ -75,7 +75,8 @@
DT_BYTE = 264,
DT_STRING = 265,
DT_LABEL = 266,
- DT_REF = 267
+ DT_REF = 267,
+ DT_INCBIN = 268
};
#endif
/* Tokens. */
@@ -89,6 +90,7 @@
#define DT_STRING 265
#define DT_LABEL 266
#define DT_REF 267
+#define DT_INCBIN 268
@@ -96,14 +98,17 @@
/* Copy the first part of user declarations. */
#line 23 "dtc-parser.y"
+#include <stdio.h>
+
#include "dtc.h"
#include "srcpos.h"
-int yylex(void);
-unsigned long long eval_literal(const char *s, int base, int bits);
+extern int yylex(void);
extern struct boot_info *the_boot_info;
+extern int treesource_error;
+static unsigned long long eval_literal(const char *s, int base, int bits);
/* Enabling traces. */
@@ -126,16 +131,16 @@
#if ! defined YYSTYPE && ! defined YYSTYPE_IS_DECLARED
typedef union YYSTYPE
-#line 34 "dtc-parser.y"
+#line 37 "dtc-parser.y"
{
char *propnodename;
char *literal;
char *labelref;
unsigned int cbase;
- u8 byte;
+ uint8_t byte;
struct data data;
- u64 addr;
+ uint64_t addr;
cell_t cell;
struct property *prop;
struct property *proplist;
@@ -144,7 +149,7 @@
struct reserve_info *re;
}
/* Line 187 of yacc.c. */
-#line 148 "dtc-parser.tab.c"
+#line 153 "dtc-parser.tab.c"
YYSTYPE;
# define yystype YYSTYPE /* obsolescent; will be withdrawn */
# define YYSTYPE_IS_DECLARED 1
@@ -169,7 +174,7 @@
/* Line 216 of yacc.c. */
-#line 173 "dtc-parser.tab.c"
+#line 178 "dtc-parser.tab.c"
#ifdef short
# undef short
@@ -386,20 +391,20 @@
/* YYFINAL -- State number of the termination state. */
#define YYFINAL 9
/* YYLAST -- Last index in YYTABLE. */
-#define YYLAST 60
+#define YYLAST 73
/* YYNTOKENS -- Number of terminals. */
-#define YYNTOKENS 24
+#define YYNTOKENS 27
/* YYNNTS -- Number of nonterminals. */
#define YYNNTS 20
/* YYNRULES -- Number of rules. */
-#define YYNRULES 43
+#define YYNRULES 45
/* YYNRULES -- Number of states. */
-#define YYNSTATES 67
+#define YYNSTATES 76
/* YYTRANSLATE(YYLEX) -- Bison symbol number corresponding to YYLEX. */
#define YYUNDEFTOK 2
-#define YYMAXUTOK 267
+#define YYMAXUTOK 268
#define YYTRANSLATE(YYX) \
((unsigned int) (YYX) <= YYMAXUTOK ? yytranslate[YYX] : YYUNDEFTOK)
@@ -411,15 +416,15 @@
2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 23, 14, 2, 15, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 13,
- 19, 18, 20, 2, 2, 2, 2, 2, 2, 2,
+ 24, 26, 2, 2, 25, 15, 2, 16, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 14,
+ 20, 19, 21, 2, 2, 2, 2, 2, 2, 2,
2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 21, 2, 22, 2, 2, 2, 2, 2, 2,
+ 2, 22, 2, 23, 2, 2, 2, 2, 2, 2,
2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 16, 2, 17, 2, 2, 2, 2,
+ 2, 2, 2, 17, 2, 18, 2, 2, 2, 2,
2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
@@ -433,7 +438,7 @@
2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
2, 2, 2, 2, 2, 2, 1, 2, 3, 4,
- 5, 6, 7, 8, 9, 10, 11, 12
+ 5, 6, 7, 8, 9, 10, 11, 12, 13
};
#if YYDEBUG
@@ -443,37 +448,39 @@
{
0, 0, 3, 8, 11, 12, 15, 21, 22, 25,
27, 34, 36, 38, 41, 47, 48, 51, 57, 61,
- 64, 69, 74, 77, 80, 81, 84, 87, 88, 91,
- 94, 97, 98, 100, 102, 105, 106, 109, 112, 113,
- 116, 119, 123, 124
+ 64, 69, 74, 77, 87, 93, 96, 97, 100, 103,
+ 104, 107, 110, 113, 114, 116, 118, 121, 122, 125,
+ 128, 129, 132, 135, 139, 140
};
/* YYRHS -- A `-1'-separated list of the rules' RHS. */
static const yytype_int8 yyrhs[] =
{
- 25, 0, -1, 3, 13, 26, 31, -1, 28, 31,
- -1, -1, 27, 26, -1, 43, 4, 30, 30, 13,
- -1, -1, 29, 28, -1, 27, -1, 43, 4, 30,
- 14, 30, 13, -1, 6, -1, 7, -1, 15, 32,
- -1, 16, 33, 41, 17, 13, -1, -1, 33, 34,
- -1, 43, 5, 18, 35, 13, -1, 43, 5, 13,
- -1, 36, 10, -1, 36, 19, 37, 20, -1, 36,
- 21, 40, 22, -1, 36, 12, -1, 35, 11, -1,
- -1, 35, 23, -1, 36, 11, -1, -1, 37, 39,
- -1, 37, 12, -1, 37, 11, -1, -1, 8, -1,
- 6, -1, 38, 7, -1, -1, 40, 9, -1, 40,
- 11, -1, -1, 42, 41, -1, 42, 34, -1, 43,
- 5, 32, -1, -1, 11, -1
+ 28, 0, -1, 3, 14, 29, 34, -1, 31, 34,
+ -1, -1, 30, 29, -1, 46, 4, 33, 33, 14,
+ -1, -1, 32, 31, -1, 30, -1, 46, 4, 33,
+ 15, 33, 14, -1, 6, -1, 7, -1, 16, 35,
+ -1, 17, 36, 44, 18, 14, -1, -1, 36, 37,
+ -1, 46, 5, 19, 38, 14, -1, 46, 5, 14,
+ -1, 39, 10, -1, 39, 20, 40, 21, -1, 39,
+ 22, 43, 23, -1, 39, 12, -1, 39, 13, 24,
+ 10, 25, 33, 25, 33, 26, -1, 39, 13, 24,
+ 10, 26, -1, 38, 11, -1, -1, 38, 25, -1,
+ 39, 11, -1, -1, 40, 42, -1, 40, 12, -1,
+ 40, 11, -1, -1, 8, -1, 6, -1, 41, 7,
+ -1, -1, 43, 9, -1, 43, 11, -1, -1, 45,
+ 44, -1, 45, 37, -1, 46, 5, 35, -1, -1,
+ 11, -1
};
/* YYRLINE[YYN] -- source line where rule number YYN was defined. */
static const yytype_uint16 yyrline[] =
{
- 0, 85, 85, 89, 97, 100, 107, 115, 118, 125,
- 129, 136, 140, 147, 154, 162, 165, 172, 176, 183,
- 187, 191, 195, 199, 207, 210, 214, 222, 225, 229,
- 234, 242, 245, 249, 253, 261, 264, 268, 276, 279,
- 283, 291, 299, 302
+ 0, 89, 89, 93, 101, 104, 111, 119, 122, 129,
+ 133, 140, 144, 151, 158, 166, 169, 176, 180, 187,
+ 191, 195, 199, 203, 220, 231, 239, 242, 246, 254,
+ 257, 261, 266, 274, 277, 281, 285, 293, 296, 300,
+ 308, 311, 315, 323, 331, 334
};
#endif
@@ -484,12 +491,12 @@
{
"$end", "error", "$undefined", "DT_V1", "DT_MEMRESERVE",
"DT_PROPNODENAME", "DT_LITERAL", "DT_LEGACYLITERAL", "DT_BASE",
- "DT_BYTE", "DT_STRING", "DT_LABEL", "DT_REF", "';'", "'-'", "'/'", "'{'",
- "'}'", "'='", "'<'", "'>'", "'['", "']'", "','", "$accept", "sourcefile",
- "memreserves", "memreserve", "v0_memreserves", "v0_memreserve", "addr",
- "devicetree", "nodedef", "proplist", "propdef", "propdata",
- "propdataprefix", "celllist", "cellbase", "cellval", "bytestring",
- "subnodes", "subnode", "label", 0
+ "DT_BYTE", "DT_STRING", "DT_LABEL", "DT_REF", "DT_INCBIN", "';'", "'-'",
+ "'/'", "'{'", "'}'", "'='", "'<'", "'>'", "'['", "']'", "'('", "','",
+ "')'", "$accept", "sourcefile", "memreserves", "memreserve",
+ "v0_memreserves", "v0_memreserve", "addr", "devicetree", "nodedef",
+ "proplist", "propdef", "propdata", "propdataprefix", "celllist",
+ "cellbase", "cellval", "bytestring", "subnodes", "subnode", "label", 0
};
#endif
@@ -499,19 +506,19 @@
static const yytype_uint16 yytoknum[] =
{
0, 256, 257, 258, 259, 260, 261, 262, 263, 264,
- 265, 266, 267, 59, 45, 47, 123, 125, 61, 60,
- 62, 91, 93, 44
+ 265, 266, 267, 268, 59, 45, 47, 123, 125, 61,
+ 60, 62, 91, 93, 40, 44, 41
};
# endif
/* YYR1[YYN] -- Symbol number of symbol that rule YYN derives. */
static const yytype_uint8 yyr1[] =
{
- 0, 24, 25, 25, 26, 26, 27, 28, 28, 29,
- 29, 30, 30, 31, 32, 33, 33, 34, 34, 35,
- 35, 35, 35, 35, 36, 36, 36, 37, 37, 37,
- 37, 38, 38, 39, 39, 40, 40, 40, 41, 41,
- 41, 42, 43, 43
+ 0, 27, 28, 28, 29, 29, 30, 31, 31, 32,
+ 32, 33, 33, 34, 35, 36, 36, 37, 37, 38,
+ 38, 38, 38, 38, 38, 38, 39, 39, 39, 40,
+ 40, 40, 40, 41, 41, 42, 42, 43, 43, 43,
+ 44, 44, 44, 45, 46, 46
};
/* YYR2[YYN] -- Number of symbols composing right hand side of rule YYN. */
@@ -519,9 +526,9 @@
{
0, 2, 4, 2, 0, 2, 5, 0, 2, 1,
6, 1, 1, 2, 5, 0, 2, 5, 3, 2,
- 4, 4, 2, 2, 0, 2, 2, 0, 2, 2,
- 2, 0, 1, 1, 2, 0, 2, 2, 0, 2,
- 2, 3, 0, 1
+ 4, 4, 2, 9, 5, 2, 0, 2, 2, 0,
+ 2, 2, 2, 0, 1, 1, 2, 0, 2, 2,
+ 0, 2, 2, 3, 0, 1
};
/* YYDEFACT[STATE-NAME] -- Default rule to reduce with in state
@@ -529,81 +536,86 @@
means the default is an error. */
static const yytype_uint8 yydefact[] =
{
- 7, 0, 43, 0, 9, 0, 7, 0, 4, 1,
+ 7, 0, 45, 0, 9, 0, 7, 0, 4, 1,
0, 3, 8, 0, 0, 4, 0, 15, 13, 11,
- 12, 0, 2, 5, 0, 38, 0, 0, 0, 16,
- 0, 38, 0, 0, 6, 0, 40, 39, 0, 10,
- 14, 18, 24, 41, 0, 0, 23, 17, 25, 19,
- 26, 22, 27, 35, 31, 0, 33, 32, 30, 29,
- 20, 0, 28, 36, 37, 21, 34
+ 12, 0, 2, 5, 0, 40, 0, 0, 0, 16,
+ 0, 40, 0, 0, 6, 0, 42, 41, 0, 10,
+ 14, 18, 26, 43, 0, 0, 25, 17, 27, 19,
+ 28, 22, 0, 29, 37, 0, 33, 0, 0, 35,
+ 34, 32, 31, 20, 0, 30, 38, 39, 21, 0,
+ 24, 36, 0, 0, 0, 23
};
/* YYDEFGOTO[NTERM-NUM]. */
static const yytype_int8 yydefgoto[] =
{
-1, 3, 14, 4, 5, 6, 27, 11, 18, 25,
- 29, 44, 45, 54, 61, 62, 55, 30, 31, 7
+ 29, 44, 45, 56, 64, 65, 57, 30, 31, 7
};
/* YYPACT[STATE-NUM] -- Index in YYTABLE of the portion describing
STATE-NUM. */
-#define YYPACT_NINF -13
+#define YYPACT_NINF -14
static const yytype_int8 yypact[] =
{
- 23, 11, -13, 37, -13, -4, 18, 39, 18, -13,
- 28, -13, -13, 34, -4, 18, 41, -13, -13, -13,
- -13, 25, -13, -13, 34, -3, 34, 33, 34, -13,
- 30, -3, 43, 36, -13, 38, -13, -13, 20, -13,
- -13, -13, -13, -13, 2, 9, -13, -13, -13, -13,
- -13, -13, -13, -13, -2, -6, -13, -13, -13, -13,
- -13, 45, -13, -13, -13, -13, -13
+ 30, -11, -14, 7, -14, -1, 27, 13, 27, -14,
+ 8, -14, -14, 40, -1, 27, 35, -14, -14, -14,
+ -14, 21, -14, -14, 40, 24, 40, 28, 40, -14,
+ 32, 24, 46, 38, -14, 39, -14, -14, 26, -14,
+ -14, -14, -14, -14, -9, 10, -14, -14, -14, -14,
+ -14, -14, 31, -14, -14, 44, -2, 3, 23, -14,
+ -14, -14, -14, -14, 50, -14, -14, -14, -14, 40,
+ -14, -14, 33, 40, 36, -14
};
/* YYPGOTO[NTERM-NUM]. */
static const yytype_int8 yypgoto[] =
{
- -13, -13, 35, 27, 47, -13, -12, 40, 17, -13,
- 26, -13, -13, -13, -13, -13, -13, 29, -13, -8
+ -14, -14, 48, 29, 53, -14, -13, 47, 34, -14,
+ 37, -14, -14, -14, -14, -14, -14, 42, -14, -7
};
/* YYTABLE[YYPACT[STATE-NUM]]. What to do in state STATE-NUM. If
positive, shift that token. If negative, reduce the rule which
number is the opposite. If zero, do what YYDEFACT says.
If YYTABLE_NINF, syntax error. */
-#define YYTABLE_NINF -43
+#define YYTABLE_NINF -45
static const yytype_int8 yytable[] =
{
- 16, 21, -42, 63, 56, 64, 57, 16, 2, 58,
- 59, 10, 28, 46, 33, 47, 65, 32, 60, 49,
- 50, 51, -42, 32, 8, 48, 1, -42, 52, 2,
- 53, 19, 20, 41, 2, 15, 17, 9, 42, 26,
- 19, 20, 15, 13, 17, 24, 34, 35, 38, 39,
- 23, 40, 66, 12, 22, 43, 0, 36, 0, 0,
- 37
+ 21, 16, 46, 8, 59, 47, 60, 9, 16, 61,
+ 62, 28, 66, 33, 67, 10, 48, 13, 32, 63,
+ 49, 50, 51, 52, 32, 17, 68, 19, 20, -44,
+ 53, -44, 54, 1, -44, 2, 26, 15, 2, 24,
+ 41, 2, 34, 17, 15, 42, 19, 20, 69, 70,
+ 35, 38, 39, 40, 58, 55, 72, 71, 73, 12,
+ 74, 22, 75, 23, 0, 0, 0, 0, 36, 0,
+ 0, 0, 43, 37
};
static const yytype_int8 yycheck[] =
{
- 8, 13, 5, 9, 6, 11, 8, 15, 11, 11,
- 12, 15, 24, 11, 26, 13, 22, 25, 20, 10,
- 11, 12, 4, 31, 13, 23, 3, 4, 19, 11,
- 21, 6, 7, 13, 11, 8, 16, 0, 18, 14,
- 6, 7, 15, 4, 16, 4, 13, 17, 5, 13,
- 15, 13, 7, 6, 14, 38, -1, 31, -1, -1,
- 31
+ 13, 8, 11, 14, 6, 14, 8, 0, 15, 11,
+ 12, 24, 9, 26, 11, 16, 25, 4, 25, 21,
+ 10, 11, 12, 13, 31, 17, 23, 6, 7, 5,
+ 20, 4, 22, 3, 4, 11, 15, 8, 11, 4,
+ 14, 11, 14, 17, 15, 19, 6, 7, 25, 26,
+ 18, 5, 14, 14, 10, 24, 69, 7, 25, 6,
+ 73, 14, 26, 15, -1, -1, -1, -1, 31, -1,
+ -1, -1, 38, 31
};
/* YYSTOS[STATE-NUM] -- The (internal number of the) accessing
symbol of state STATE-NUM. */
static const yytype_uint8 yystos[] =
{
- 0, 3, 11, 25, 27, 28, 29, 43, 13, 0,
- 15, 31, 28, 4, 26, 27, 43, 16, 32, 6,
- 7, 30, 31, 26, 4, 33, 14, 30, 30, 34,
- 41, 42, 43, 30, 13, 17, 34, 41, 5, 13,
- 13, 13, 18, 32, 35, 36, 11, 13, 23, 10,
- 11, 12, 19, 21, 37, 40, 6, 8, 11, 12,
- 20, 38, 39, 9, 11, 22, 7
+ 0, 3, 11, 28, 30, 31, 32, 46, 14, 0,
+ 16, 34, 31, 4, 29, 30, 46, 17, 35, 6,
+ 7, 33, 34, 29, 4, 36, 15, 33, 33, 37,
+ 44, 45, 46, 33, 14, 18, 37, 44, 5, 14,
+ 14, 14, 19, 35, 38, 39, 11, 14, 25, 10,
+ 11, 12, 13, 20, 22, 24, 40, 43, 10, 6,
+ 8, 11, 12, 21, 41, 42, 9, 11, 23, 25,
+ 26, 7, 33, 25, 33, 26
};
#define yyerrok (yyerrstatus = 0)
@@ -1440,289 +1452,323 @@
switch (yyn)
{
case 2:
-#line 86 "dtc-parser.y"
+#line 90 "dtc-parser.y"
{
- the_boot_info = build_boot_info((yyvsp[(3) - (4)].re), (yyvsp[(4) - (4)].node));
+ the_boot_info = build_boot_info((yyvsp[(3) - (4)].re), (yyvsp[(4) - (4)].node), 0);
;}
break;
case 3:
-#line 90 "dtc-parser.y"
+#line 94 "dtc-parser.y"
{
- the_boot_info = build_boot_info((yyvsp[(1) - (2)].re), (yyvsp[(2) - (2)].node));
+ the_boot_info = build_boot_info((yyvsp[(1) - (2)].re), (yyvsp[(2) - (2)].node), 0);
;}
break;
case 4:
-#line 97 "dtc-parser.y"
+#line 101 "dtc-parser.y"
{
(yyval.re) = NULL;
;}
break;
case 5:
-#line 101 "dtc-parser.y"
+#line 105 "dtc-parser.y"
{
(yyval.re) = chain_reserve_entry((yyvsp[(1) - (2)].re), (yyvsp[(2) - (2)].re));
;}
break;
case 6:
-#line 108 "dtc-parser.y"
+#line 112 "dtc-parser.y"
{
(yyval.re) = build_reserve_entry((yyvsp[(3) - (5)].addr), (yyvsp[(4) - (5)].addr), (yyvsp[(1) - (5)].labelref));
;}
break;
case 7:
-#line 115 "dtc-parser.y"
+#line 119 "dtc-parser.y"
{
(yyval.re) = NULL;
;}
break;
case 8:
-#line 119 "dtc-parser.y"
+#line 123 "dtc-parser.y"
{
(yyval.re) = chain_reserve_entry((yyvsp[(1) - (2)].re), (yyvsp[(2) - (2)].re));
;}
break;
case 9:
-#line 126 "dtc-parser.y"
+#line 130 "dtc-parser.y"
{
(yyval.re) = (yyvsp[(1) - (1)].re);
;}
break;
case 10:
-#line 130 "dtc-parser.y"
+#line 134 "dtc-parser.y"
{
(yyval.re) = build_reserve_entry((yyvsp[(3) - (6)].addr), (yyvsp[(5) - (6)].addr) - (yyvsp[(3) - (6)].addr) + 1, (yyvsp[(1) - (6)].labelref));
;}
break;
case 11:
-#line 137 "dtc-parser.y"
+#line 141 "dtc-parser.y"
{
(yyval.addr) = eval_literal((yyvsp[(1) - (1)].literal), 0, 64);
;}
break;
case 12:
-#line 141 "dtc-parser.y"
+#line 145 "dtc-parser.y"
{
(yyval.addr) = eval_literal((yyvsp[(1) - (1)].literal), 16, 64);
;}
break;
case 13:
-#line 148 "dtc-parser.y"
+#line 152 "dtc-parser.y"
{
(yyval.node) = name_node((yyvsp[(2) - (2)].node), "", NULL);
;}
break;
case 14:
-#line 155 "dtc-parser.y"
+#line 159 "dtc-parser.y"
{
(yyval.node) = build_node((yyvsp[(2) - (5)].proplist), (yyvsp[(3) - (5)].nodelist));
;}
break;
case 15:
-#line 162 "dtc-parser.y"
+#line 166 "dtc-parser.y"
{
(yyval.proplist) = NULL;
;}
break;
case 16:
-#line 166 "dtc-parser.y"
+#line 170 "dtc-parser.y"
{
(yyval.proplist) = chain_property((yyvsp[(2) - (2)].prop), (yyvsp[(1) - (2)].proplist));
;}
break;
case 17:
-#line 173 "dtc-parser.y"
+#line 177 "dtc-parser.y"
{
(yyval.prop) = build_property((yyvsp[(2) - (5)].propnodename), (yyvsp[(4) - (5)].data), (yyvsp[(1) - (5)].labelref));
;}
break;
case 18:
-#line 177 "dtc-parser.y"
+#line 181 "dtc-parser.y"
{
(yyval.prop) = build_property((yyvsp[(2) - (3)].propnodename), empty_data, (yyvsp[(1) - (3)].labelref));
;}
break;
case 19:
-#line 184 "dtc-parser.y"
+#line 188 "dtc-parser.y"
{
(yyval.data) = data_merge((yyvsp[(1) - (2)].data), (yyvsp[(2) - (2)].data));
;}
break;
case 20:
-#line 188 "dtc-parser.y"
- {
- (yyval.data) = data_merge((yyvsp[(1) - (4)].data), (yyvsp[(3) - (4)].data));
- ;}
- break;
-
- case 21:
#line 192 "dtc-parser.y"
{
(yyval.data) = data_merge((yyvsp[(1) - (4)].data), (yyvsp[(3) - (4)].data));
;}
break;
- case 22:
+ case 21:
#line 196 "dtc-parser.y"
{
+ (yyval.data) = data_merge((yyvsp[(1) - (4)].data), (yyvsp[(3) - (4)].data));
+ ;}
+ break;
+
+ case 22:
+#line 200 "dtc-parser.y"
+ {
(yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), REF_PATH, (yyvsp[(2) - (2)].labelref));
;}
break;
case 23:
-#line 200 "dtc-parser.y"
+#line 204 "dtc-parser.y"
+ {
+ struct search_path path = { srcpos_file->dir, NULL, NULL };
+ struct dtc_file *file = dtc_open_file((yyvsp[(4) - (9)].data).val, &path);
+ struct data d = empty_data;
+
+ if ((yyvsp[(6) - (9)].addr) != 0)
+ if (fseek(file->file, (yyvsp[(6) - (9)].addr), SEEK_SET) != 0)
+ yyerrorf("Couldn't seek to offset %llu in \"%s\": %s",
+ (unsigned long long)(yyvsp[(6) - (9)].addr),
+ (yyvsp[(4) - (9)].data).val, strerror(errno));
+
+ d = data_copy_file(file->file, (yyvsp[(8) - (9)].addr));
+
+ (yyval.data) = data_merge((yyvsp[(1) - (9)].data), d);
+ dtc_close_file(file);
+ ;}
+ break;
+
+ case 24:
+#line 221 "dtc-parser.y"
+ {
+ struct search_path path = { srcpos_file->dir, NULL, NULL };
+ struct dtc_file *file = dtc_open_file((yyvsp[(4) - (5)].data).val, &path);
+ struct data d = empty_data;
+
+ d = data_copy_file(file->file, -1);
+
+ (yyval.data) = data_merge((yyvsp[(1) - (5)].data), d);
+ dtc_close_file(file);
+ ;}
+ break;
+
+ case 25:
+#line 232 "dtc-parser.y"
{
(yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), LABEL, (yyvsp[(2) - (2)].labelref));
;}
break;
- case 24:
-#line 207 "dtc-parser.y"
+ case 26:
+#line 239 "dtc-parser.y"
{
(yyval.data) = empty_data;
;}
break;
- case 25:
-#line 211 "dtc-parser.y"
+ case 27:
+#line 243 "dtc-parser.y"
{
(yyval.data) = (yyvsp[(1) - (2)].data);
;}
break;
- case 26:
-#line 215 "dtc-parser.y"
+ case 28:
+#line 247 "dtc-parser.y"
{
(yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), LABEL, (yyvsp[(2) - (2)].labelref));
;}
break;
- case 27:
-#line 222 "dtc-parser.y"
+ case 29:
+#line 254 "dtc-parser.y"
{
(yyval.data) = empty_data;
;}
break;
- case 28:
-#line 226 "dtc-parser.y"
+ case 30:
+#line 258 "dtc-parser.y"
{
(yyval.data) = data_append_cell((yyvsp[(1) - (2)].data), (yyvsp[(2) - (2)].cell));
;}
break;
- case 29:
-#line 230 "dtc-parser.y"
+ case 31:
+#line 262 "dtc-parser.y"
{
(yyval.data) = data_append_cell(data_add_marker((yyvsp[(1) - (2)].data), REF_PHANDLE,
(yyvsp[(2) - (2)].labelref)), -1);
;}
break;
- case 30:
-#line 235 "dtc-parser.y"
+ case 32:
+#line 267 "dtc-parser.y"
{
(yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), LABEL, (yyvsp[(2) - (2)].labelref));
;}
break;
- case 31:
-#line 242 "dtc-parser.y"
+ case 33:
+#line 274 "dtc-parser.y"
{
(yyval.cbase) = 16;
;}
break;
- case 33:
-#line 250 "dtc-parser.y"
+ case 35:
+#line 282 "dtc-parser.y"
{
(yyval.cell) = eval_literal((yyvsp[(1) - (1)].literal), 0, 32);
;}
break;
- case 34:
-#line 254 "dtc-parser.y"
+ case 36:
+#line 286 "dtc-parser.y"
{
(yyval.cell) = eval_literal((yyvsp[(2) - (2)].literal), (yyvsp[(1) - (2)].cbase), 32);
;}
break;
- case 35:
-#line 261 "dtc-parser.y"
+ case 37:
+#line 293 "dtc-parser.y"
{
(yyval.data) = empty_data;
;}
break;
- case 36:
-#line 265 "dtc-parser.y"
+ case 38:
+#line 297 "dtc-parser.y"
{
(yyval.data) = data_append_byte((yyvsp[(1) - (2)].data), (yyvsp[(2) - (2)].byte));
;}
break;
- case 37:
-#line 269 "dtc-parser.y"
+ case 39:
+#line 301 "dtc-parser.y"
{
(yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), LABEL, (yyvsp[(2) - (2)].labelref));
;}
break;
- case 38:
-#line 276 "dtc-parser.y"
+ case 40:
+#line 308 "dtc-parser.y"
{
(yyval.nodelist) = NULL;
;}
break;
- case 39:
-#line 280 "dtc-parser.y"
+ case 41:
+#line 312 "dtc-parser.y"
{
(yyval.nodelist) = chain_node((yyvsp[(1) - (2)].node), (yyvsp[(2) - (2)].nodelist));
;}
break;
- case 40:
-#line 284 "dtc-parser.y"
+ case 42:
+#line 316 "dtc-parser.y"
{
- yyerror("syntax error: properties must precede subnodes\n");
+ yyerror("syntax error: properties must precede subnodes");
YYERROR;
;}
break;
- case 41:
-#line 292 "dtc-parser.y"
+ case 43:
+#line 324 "dtc-parser.y"
{
(yyval.node) = name_node((yyvsp[(3) - (3)].node), (yyvsp[(2) - (3)].propnodename), (yyvsp[(1) - (3)].labelref));
;}
break;
- case 42:
-#line 299 "dtc-parser.y"
+ case 44:
+#line 331 "dtc-parser.y"
{
(yyval.labelref) = NULL;
;}
break;
- case 43:
-#line 303 "dtc-parser.y"
+ case 45:
+#line 335 "dtc-parser.y"
{
(yyval.labelref) = (yyvsp[(1) - (1)].labelref);
;}
@@ -1730,7 +1776,7 @@
/* Line 1267 of yacc.c. */
-#line 1734 "dtc-parser.tab.c"
+#line 1780 "dtc-parser.tab.c"
default: break;
}
YY_SYMBOL_PRINT ("-> $$ =", yyr1[yyn], &yyval, &yyloc);
@@ -1950,21 +1996,32 @@
}
-#line 308 "dtc-parser.y"
+#line 340 "dtc-parser.y"
-void yyerror (char const *s)
+void yyerrorf(char const *s, ...)
{
- const char *fname = srcpos_filename_for_num(yylloc.filenum);
+ const char *fname = srcpos_file ? srcpos_file->name : "<no-file>";
+ va_list va;
+ va_start(va, s);
if (strcmp(fname, "-") == 0)
fname = "stdin";
- fprintf(stderr, "%s:%d %s\n",
- fname, yylloc.first_line, s);
+ fprintf(stderr, "%s:%d ", fname, yylloc.first_line);
+ vfprintf(stderr, s, va);
+ fprintf(stderr, "\n");
+
+ treesource_error = 1;
+ va_end(va);
}
-unsigned long long eval_literal(const char *s, int base, int bits)
+void yyerror (char const *s)
+{
+ yyerrorf("%s", s);
+}
+
+static unsigned long long eval_literal(const char *s, int base, int bits)
{
unsigned long long val;
char *e;
diff --git a/arch/powerpc/boot/dtc-src/dtc-parser.tab.h_shipped b/arch/powerpc/boot/dtc-src/dtc-parser.tab.h_shipped
index 4707b02..ba99100 100644
--- a/arch/powerpc/boot/dtc-src/dtc-parser.tab.h_shipped
+++ b/arch/powerpc/boot/dtc-src/dtc-parser.tab.h_shipped
@@ -48,7 +48,8 @@
DT_BYTE = 264,
DT_STRING = 265,
DT_LABEL = 266,
- DT_REF = 267
+ DT_REF = 267,
+ DT_INCBIN = 268
};
#endif
/* Tokens. */
@@ -62,22 +63,23 @@
#define DT_STRING 265
#define DT_LABEL 266
#define DT_REF 267
+#define DT_INCBIN 268
#if ! defined YYSTYPE && ! defined YYSTYPE_IS_DECLARED
typedef union YYSTYPE
-#line 34 "dtc-parser.y"
+#line 37 "dtc-parser.y"
{
char *propnodename;
char *literal;
char *labelref;
unsigned int cbase;
- u8 byte;
+ uint8_t byte;
struct data data;
- u64 addr;
+ uint64_t addr;
cell_t cell;
struct property *prop;
struct property *proplist;
@@ -86,7 +88,7 @@
struct reserve_info *re;
}
/* Line 1489 of yacc.c. */
-#line 90 "dtc-parser.tab.h"
+#line 92 "dtc-parser.tab.h"
YYSTYPE;
# define yystype YYSTYPE /* obsolescent; will be withdrawn */
# define YYSTYPE_IS_DECLARED 1
diff --git a/arch/powerpc/boot/dtc-src/dtc-parser.y b/arch/powerpc/boot/dtc-src/dtc-parser.y
index 002ea7f..b2ab562 100644
--- a/arch/powerpc/boot/dtc-src/dtc-parser.y
+++ b/arch/powerpc/boot/dtc-src/dtc-parser.y
@@ -21,14 +21,17 @@
%locations
%{
+#include <stdio.h>
+
#include "dtc.h"
#include "srcpos.h"
-int yylex(void);
-unsigned long long eval_literal(const char *s, int base, int bits);
+extern int yylex(void);
extern struct boot_info *the_boot_info;
+extern int treesource_error;
+static unsigned long long eval_literal(const char *s, int base, int bits);
%}
%union {
@@ -36,10 +39,10 @@
char *literal;
char *labelref;
unsigned int cbase;
- u8 byte;
+ uint8_t byte;
struct data data;
- u64 addr;
+ uint64_t addr;
cell_t cell;
struct property *prop;
struct property *proplist;
@@ -58,6 +61,7 @@
%token <data> DT_STRING
%token <labelref> DT_LABEL
%token <labelref> DT_REF
+%token DT_INCBIN
%type <data> propdata
%type <data> propdataprefix
@@ -84,11 +88,11 @@
sourcefile:
DT_V1 ';' memreserves devicetree
{
- the_boot_info = build_boot_info($3, $4);
+ the_boot_info = build_boot_info($3, $4, 0);
}
| v0_memreserves devicetree
{
- the_boot_info = build_boot_info($1, $2);
+ the_boot_info = build_boot_info($1, $2, 0);
}
;
@@ -196,6 +200,34 @@
{
$$ = data_add_marker($1, REF_PATH, $2);
}
+ | propdataprefix DT_INCBIN '(' DT_STRING ',' addr ',' addr ')'
+ {
+ struct search_path path = { srcpos_file->dir, NULL, NULL };
+ struct dtc_file *file = dtc_open_file($4.val, &path);
+ struct data d = empty_data;
+
+ if ($6 != 0)
+ if (fseek(file->file, $6, SEEK_SET) != 0)
+ yyerrorf("Couldn't seek to offset %llu in \"%s\": %s",
+ (unsigned long long)$6,
+ $4.val, strerror(errno));
+
+ d = data_copy_file(file->file, $8);
+
+ $$ = data_merge($1, d);
+ dtc_close_file(file);
+ }
+ | propdataprefix DT_INCBIN '(' DT_STRING ')'
+ {
+ struct search_path path = { srcpos_file->dir, NULL, NULL };
+ struct dtc_file *file = dtc_open_file($4.val, &path);
+ struct data d = empty_data;
+
+ d = data_copy_file(file->file, -1);
+
+ $$ = data_merge($1, d);
+ dtc_close_file(file);
+ }
| propdata DT_LABEL
{
$$ = data_add_marker($1, LABEL, $2);
@@ -282,7 +314,7 @@
}
| subnode propdef
{
- yyerror("syntax error: properties must precede subnodes\n");
+ yyerror("syntax error: properties must precede subnodes");
YYERROR;
}
;
@@ -307,18 +339,29 @@
%%
-void yyerror (char const *s)
+void yyerrorf(char const *s, ...)
{
- const char *fname = srcpos_filename_for_num(yylloc.filenum);
+ const char *fname = srcpos_file ? srcpos_file->name : "<no-file>";
+ va_list va;
+ va_start(va, s);
if (strcmp(fname, "-") == 0)
fname = "stdin";
- fprintf(stderr, "%s:%d %s\n",
- fname, yylloc.first_line, s);
+ fprintf(stderr, "%s:%d ", fname, yylloc.first_line);
+ vfprintf(stderr, s, va);
+ fprintf(stderr, "\n");
+
+ treesource_error = 1;
+ va_end(va);
}
-unsigned long long eval_literal(const char *s, int base, int bits)
+void yyerror (char const *s)
+{
+ yyerrorf("%s", s);
+}
+
+static unsigned long long eval_literal(const char *s, int base, int bits)
{
unsigned long long val;
char *e;
diff --git a/arch/powerpc/boot/dtc-src/dtc.c b/arch/powerpc/boot/dtc-src/dtc.c
index 01131d7..d8fd43b 100644
--- a/arch/powerpc/boot/dtc-src/dtc.c
+++ b/arch/powerpc/boot/dtc-src/dtc.c
@@ -55,7 +55,7 @@
return str;
}
-void fill_fullpaths(struct node *tree, const char *prefix)
+static void fill_fullpaths(struct node *tree, const char *prefix)
{
struct node *child;
const char *unit;
@@ -106,7 +106,7 @@
fprintf(stderr, "\t\tForce - try to produce output even if the input tree has errors\n");
fprintf(stderr, "\t-v\n");
fprintf(stderr, "\t\tPrint DTC version and exit\n");
- exit(2);
+ exit(3);
}
int main(int argc, char *argv[])
@@ -118,10 +118,9 @@
int force = 0, check = 0;
const char *arg;
int opt;
- FILE *inf = NULL;
FILE *outf = NULL;
int outversion = DEFAULT_FDT_VERSION;
- int boot_cpuid_phys = 0xfeedbeef;
+ long long cmdline_boot_cpuid = -1;
quiet = 0;
reservenum = 0;
@@ -161,11 +160,11 @@
quiet++;
break;
case 'b':
- boot_cpuid_phys = strtol(optarg, NULL, 0);
+ cmdline_boot_cpuid = strtoll(optarg, NULL, 0);
break;
case 'v':
- printf("Version: %s\n", DTC_VERSION);
- exit(0);
+ printf("Version: %s\n", DTC_VERSION);
+ exit(0);
case 'h':
default:
usage();
@@ -180,31 +179,27 @@
arg = argv[optind];
/* minsize and padsize are mutually exclusive */
- if ((minsize) && (padsize)) {
+ if (minsize && padsize)
die("Can't set both -p and -S\n");
- }
fprintf(stderr, "DTC: %s->%s on file \"%s\"\n",
inform, outform, arg);
- if (streq(inform, "dts")) {
+ if (streq(inform, "dts"))
bi = dt_from_source(arg);
- } else if (streq(inform, "fs")) {
+ else if (streq(inform, "fs"))
bi = dt_from_fs(arg);
- } else if(streq(inform, "dtb")) {
- inf = dtc_open_file(arg);
- bi = dt_from_blob(inf);
- } else {
+ else if(streq(inform, "dtb"))
+ bi = dt_from_blob(arg);
+ else
die("Unknown input format \"%s\"\n", inform);
- }
- if (inf && (inf != stdin))
- fclose(inf);
+ if (cmdline_boot_cpuid != -1)
+ bi->boot_cpuid_phys = cmdline_boot_cpuid;
- if (! bi || ! bi->dt)
- die("Couldn't read input tree\n");
+ fill_fullpaths(bi->dt, "");
+ process_checks(force, bi);
- process_checks(force, bi, check, outversion, boot_cpuid_phys);
if (streq(outname, "-")) {
outf = stdout;
@@ -218,9 +213,9 @@
if (streq(outform, "dts")) {
dt_to_source(outf, bi);
} else if (streq(outform, "dtb")) {
- dt_to_blob(outf, bi, outversion, boot_cpuid_phys);
+ dt_to_blob(outf, bi, outversion);
} else if (streq(outform, "asm")) {
- dt_to_asm(outf, bi, outversion, boot_cpuid_phys);
+ dt_to_asm(outf, bi, outversion);
} else if (streq(outform, "null")) {
/* do nothing */
} else {
diff --git a/arch/powerpc/boot/dtc-src/dtc.h b/arch/powerpc/boot/dtc-src/dtc.h
index 65281777..08d54c8 100644
--- a/arch/powerpc/boot/dtc-src/dtc.h
+++ b/arch/powerpc/boot/dtc-src/dtc.h
@@ -30,10 +30,8 @@
#include <ctype.h>
#include <errno.h>
#include <unistd.h>
-#include <netinet/in.h>
-#include <endian.h>
-#include <byteswap.h>
+#include <libfdt_env.h>
#include <fdt.h>
#define DEFAULT_FDT_VERSION 17
@@ -75,25 +73,8 @@
return new;
}
-typedef uint8_t u8;
-typedef uint16_t u16;
-typedef uint32_t u32;
-typedef uint64_t u64;
-typedef u32 cell_t;
+typedef uint32_t cell_t;
-#define cpu_to_be16(x) htons(x)
-#define be16_to_cpu(x) ntohs(x)
-
-#define cpu_to_be32(x) htonl(x)
-#define be32_to_cpu(x) ntohl(x)
-
-#if __BYTE_ORDER == __BIG_ENDIAN
-#define cpu_to_be64(x) (x)
-#define be64_to_cpu(x) (x)
-#else
-#define cpu_to_be64(x) bswap_64(x)
-#define be64_to_cpu(x) bswap_64(x)
-#endif
#define streq(a, b) (strcmp((a), (b)) == 0)
#define strneq(a, b, n) (strncmp((a), (b), (n)) == 0)
@@ -118,7 +99,6 @@
struct data {
int len;
char *val;
- int asize;
struct marker *markers;
};
@@ -145,7 +125,7 @@
struct data data_merge(struct data d1, struct data d2);
struct data data_append_cell(struct data d, cell_t word);
struct data data_append_re(struct data d, const struct fdt_reserve_entry *re);
-struct data data_append_addr(struct data d, u64 addr);
+struct data data_append_addr(struct data d, uint64_t addr);
struct data data_append_byte(struct data d, uint8_t byte);
struct data data_append_zeroes(struct data d, int len);
struct data data_append_align(struct data d, int align);
@@ -223,7 +203,7 @@
char *label;
};
-struct reserve_info *build_reserve_entry(u64 start, u64 len, char *label);
+struct reserve_info *build_reserve_entry(uint64_t start, uint64_t len, char *label);
struct reserve_info *chain_reserve_entry(struct reserve_info *first,
struct reserve_info *list);
struct reserve_info *add_reserve_entry(struct reserve_info *list,
@@ -233,24 +213,22 @@
struct boot_info {
struct reserve_info *reservelist;
struct node *dt; /* the device tree */
+ uint32_t boot_cpuid_phys;
};
struct boot_info *build_boot_info(struct reserve_info *reservelist,
- struct node *tree);
+ struct node *tree, uint32_t boot_cpuid_phys);
/* Checks */
-void process_checks(int force, struct boot_info *bi,
- int checkflag, int outversion, int boot_cpuid_phys);
+void process_checks(int force, struct boot_info *bi);
/* Flattened trees */
-void dt_to_blob(FILE *f, struct boot_info *bi, int version,
- int boot_cpuid_phys);
-void dt_to_asm(FILE *f, struct boot_info *bi, int version,
- int boot_cpuid_phys);
+void dt_to_blob(FILE *f, struct boot_info *bi, int version);
+void dt_to_asm(FILE *f, struct boot_info *bi, int version);
-struct boot_info *dt_from_blob(FILE *f);
+struct boot_info *dt_from_blob(const char *fname);
/* Tree source */
@@ -264,6 +242,5 @@
/* misc */
char *join_path(const char *path, const char *name);
-void fill_fullpaths(struct node *tree, const char *prefix);
#endif /* _DTC_H */
diff --git a/arch/powerpc/boot/dtc-src/flattree.c b/arch/powerpc/boot/dtc-src/flattree.c
index a7cfb84..76acd28 100644
--- a/arch/powerpc/boot/dtc-src/flattree.c
+++ b/arch/powerpc/boot/dtc-src/flattree.c
@@ -19,6 +19,7 @@
*/
#include "dtc.h"
+#include "srcpos.h"
#define FTF_FULLPATH 0x1
#define FTF_VARALIGN 0x2
@@ -162,28 +163,18 @@
{
FILE *f = e;
int off = 0;
- struct marker *m;
+ struct marker *m = d.markers;
- m = d.markers;
- while (m) {
- if (m->type == LABEL)
- emit_offset_label(f, m->ref, m->offset);
- m = m->next;
- }
+ for_each_marker_of_type(m, LABEL)
+ emit_offset_label(f, m->ref, m->offset);
- while ((d.len - off) >= sizeof(u32)) {
+ while ((d.len - off) >= sizeof(uint32_t)) {
fprintf(f, "\t.long\t0x%x\n",
- be32_to_cpu(*((u32 *)(d.val+off))));
- off += sizeof(u32);
+ fdt32_to_cpu(*((uint32_t *)(d.val+off))));
+ off += sizeof(uint32_t);
}
- if ((d.len - off) >= sizeof(u16)) {
- fprintf(f, "\t.short\t0x%hx\n",
- be16_to_cpu(*((u16 *)(d.val+off))));
- off += sizeof(u16);
- }
-
- if ((d.len - off) >= 1) {
+ while ((d.len - off) >= 1) {
fprintf(f, "\t.byte\t0x%hhx\n", d.val[off]);
off += 1;
}
@@ -336,29 +327,28 @@
memset(fdt, 0xff, sizeof(*fdt));
- fdt->magic = cpu_to_be32(FDT_MAGIC);
- fdt->version = cpu_to_be32(vi->version);
- fdt->last_comp_version = cpu_to_be32(vi->last_comp_version);
+ fdt->magic = cpu_to_fdt32(FDT_MAGIC);
+ fdt->version = cpu_to_fdt32(vi->version);
+ fdt->last_comp_version = cpu_to_fdt32(vi->last_comp_version);
/* Reserve map should be doubleword aligned */
reserve_off = ALIGN(vi->hdr_size, 8);
- fdt->off_mem_rsvmap = cpu_to_be32(reserve_off);
- fdt->off_dt_struct = cpu_to_be32(reserve_off + reservesize);
- fdt->off_dt_strings = cpu_to_be32(reserve_off + reservesize
+ fdt->off_mem_rsvmap = cpu_to_fdt32(reserve_off);
+ fdt->off_dt_struct = cpu_to_fdt32(reserve_off + reservesize);
+ fdt->off_dt_strings = cpu_to_fdt32(reserve_off + reservesize
+ dtsize);
- fdt->totalsize = cpu_to_be32(reserve_off + reservesize + dtsize + strsize);
+ fdt->totalsize = cpu_to_fdt32(reserve_off + reservesize + dtsize + strsize);
if (vi->flags & FTF_BOOTCPUID)
- fdt->boot_cpuid_phys = cpu_to_be32(boot_cpuid_phys);
+ fdt->boot_cpuid_phys = cpu_to_fdt32(boot_cpuid_phys);
if (vi->flags & FTF_STRTABSIZE)
- fdt->size_dt_strings = cpu_to_be32(strsize);
+ fdt->size_dt_strings = cpu_to_fdt32(strsize);
if (vi->flags & FTF_STRUCTSIZE)
- fdt->size_dt_struct = cpu_to_be32(dtsize);
+ fdt->size_dt_struct = cpu_to_fdt32(dtsize);
}
-void dt_to_blob(FILE *f, struct boot_info *bi, int version,
- int boot_cpuid_phys)
+void dt_to_blob(FILE *f, struct boot_info *bi, int version)
{
struct version_info *vi = NULL;
int i;
@@ -383,26 +373,26 @@
/* Make header */
make_fdt_header(&fdt, vi, reservebuf.len, dtbuf.len, strbuf.len,
- boot_cpuid_phys);
+ bi->boot_cpuid_phys);
/*
* If the user asked for more space than is used, adjust the totalsize.
*/
if (minsize > 0) {
- padlen = minsize - be32_to_cpu(fdt.totalsize);
+ padlen = minsize - fdt32_to_cpu(fdt.totalsize);
if ((padlen < 0) && (quiet < 1))
fprintf(stderr,
"Warning: blob size %d >= minimum size %d\n",
- be32_to_cpu(fdt.totalsize), minsize);
+ fdt32_to_cpu(fdt.totalsize), minsize);
}
if (padsize > 0)
padlen = padsize;
if (padlen > 0) {
- int tsize = be32_to_cpu(fdt.totalsize);
+ int tsize = fdt32_to_cpu(fdt.totalsize);
tsize += padlen;
- fdt.totalsize = cpu_to_be32(tsize);
+ fdt.totalsize = cpu_to_fdt32(tsize);
}
/*
@@ -410,7 +400,7 @@
* the reserve buffer, add the reserve map terminating zeroes,
* the device tree itself, and finally the strings.
*/
- blob = data_append_data(blob, &fdt, sizeof(fdt));
+ blob = data_append_data(blob, &fdt, vi->hdr_size);
blob = data_append_align(blob, 8);
blob = data_merge(blob, reservebuf);
blob = data_append_zeroes(blob, sizeof(struct fdt_reserve_entry));
@@ -449,7 +439,7 @@
}
}
-void dt_to_asm(FILE *f, struct boot_info *bi, int version, int boot_cpuid_phys)
+void dt_to_asm(FILE *f, struct boot_info *bi, int version)
{
struct version_info *vi = NULL;
int i;
@@ -489,7 +479,7 @@
if (vi->flags & FTF_BOOTCPUID)
fprintf(f, "\t.long\t%i\t\t\t\t\t/* boot_cpuid_phys */\n",
- boot_cpuid_phys);
+ bi->boot_cpuid_phys);
if (vi->flags & FTF_STRTABSIZE)
fprintf(f, "\t.long\t_%s_strings_end - _%s_strings_start\t/* size_dt_strings */\n",
@@ -579,15 +569,15 @@
inb->ptr += len;
}
-static u32 flat_read_word(struct inbuf *inb)
+static uint32_t flat_read_word(struct inbuf *inb)
{
- u32 val;
+ uint32_t val;
assert(((inb->ptr - inb->base) % sizeof(val)) == 0);
flat_read_chunk(inb, &val, sizeof(val));
- return be32_to_cpu(val);
+ return fdt32_to_cpu(val);
}
static void flat_realign(struct inbuf *inb, int align)
@@ -615,7 +605,7 @@
inb->ptr += len;
- flat_realign(inb, sizeof(u32));
+ flat_realign(inb, sizeof(uint32_t));
return str;
}
@@ -632,7 +622,7 @@
flat_read_chunk(inb, d.val, len);
- flat_realign(inb, sizeof(u32));
+ flat_realign(inb, sizeof(uint32_t));
return d;
}
@@ -659,7 +649,7 @@
static struct property *flat_read_property(struct inbuf *dtbuf,
struct inbuf *strbuf, int flags)
{
- u32 proplen, stroff;
+ uint32_t proplen, stroff;
char *name;
struct data val;
@@ -693,8 +683,8 @@
p = inb->ptr;
while (1) {
flat_read_chunk(inb, &re, sizeof(re));
- re.address = be64_to_cpu(re.address);
- re.size = be64_to_cpu(re.size);
+ re.address = fdt64_to_cpu(re.address);
+ re.size = fdt64_to_cpu(re.size);
if (re.size == 0)
break;
@@ -708,77 +698,37 @@
static char *nodename_from_path(const char *ppath, const char *cpath)
{
- const char *lslash;
int plen;
- lslash = strrchr(cpath, '/');
- if (! lslash)
- return NULL;
+ plen = strlen(ppath);
- plen = lslash - cpath;
+ if (!strneq(ppath, cpath, plen))
+ die("Path \"%s\" is not valid as a child of \"%s\"\n",
+ cpath, ppath);
- if (streq(cpath, "/") && streq(ppath, ""))
- return "";
+ /* root node is a special case */
+ if (!streq(ppath, "/"))
+ plen++;
- if ((plen == 0) && streq(ppath, "/"))
- return strdup(lslash+1);
-
- if (! strneq(ppath, cpath, plen))
- return NULL;
-
- return strdup(lslash+1);
-}
-
-static const char PROPCHAR[] = "abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789,._+*#?-";
-static const char UNITCHAR[] = "0123456789abcdef,";
-
-static int check_node_name(const char *name)
-{
- const char *atpos;
- int basenamelen;
-
- atpos = strrchr(name, '@');
-
- if (atpos)
- basenamelen = atpos - name;
- else
- basenamelen = strlen(name);
-
- if (strspn(name, PROPCHAR) < basenamelen)
- return -1;
-
- if (atpos
- && ((basenamelen + 1 + strspn(atpos+1, UNITCHAR)) < strlen(name)))
- return -1;
-
- return basenamelen;
+ return strdup(cpath + plen);
}
static struct node *unflatten_tree(struct inbuf *dtbuf,
struct inbuf *strbuf,
- const char *parent_path, int flags)
+ const char *parent_flatname, int flags)
{
struct node *node;
- u32 val;
+ char *flatname;
+ uint32_t val;
node = build_node(NULL, NULL);
- if (flags & FTF_FULLPATH) {
- node->fullpath = flat_read_string(dtbuf);
- node->name = nodename_from_path(parent_path, node->fullpath);
+ flatname = flat_read_string(dtbuf);
- if (! node->name)
- die("Path \"%s\" is not valid as a child of \"%s\"\n",
- node->fullpath, parent_path);
- } else {
- node->name = flat_read_string(dtbuf);
- node->fullpath = join_path(parent_path, node->name);
- }
-
- node->basenamelen = check_node_name(node->name);
- if (node->basenamelen < 0) {
- fprintf(stderr, "Warning \"%s\" has incorrect format\n", node->name);
- }
+ if (flags & FTF_FULLPATH)
+ node->name = nodename_from_path(parent_flatname, flatname);
+ else
+ node->name = flatname;
do {
struct property *prop;
@@ -795,8 +745,7 @@
break;
case FDT_BEGIN_NODE:
- child = unflatten_tree(dtbuf,strbuf, node->fullpath,
- flags);
+ child = unflatten_tree(dtbuf,strbuf, flatname, flags);
add_child(node, child);
break;
@@ -825,10 +774,11 @@
}
-struct boot_info *dt_from_blob(FILE *f)
+struct boot_info *dt_from_blob(const char *fname)
{
- u32 magic, totalsize, version, size_str, size_dt;
- u32 off_dt, off_str, off_mem_rsvmap;
+ struct dtc_file *dtcf;
+ uint32_t magic, totalsize, version, size_dt, boot_cpuid_phys;
+ uint32_t off_dt, off_str, off_mem_rsvmap;
int rc;
char *blob;
struct fdt_header *fdt;
@@ -838,54 +788,56 @@
int sizeleft;
struct reserve_info *reservelist;
struct node *tree;
- u32 val;
+ uint32_t val;
int flags = 0;
- rc = fread(&magic, sizeof(magic), 1, f);
- if (ferror(f))
+ dtcf = dtc_open_file(fname, NULL);
+
+ rc = fread(&magic, sizeof(magic), 1, dtcf->file);
+ if (ferror(dtcf->file))
die("Error reading DT blob magic number: %s\n",
strerror(errno));
if (rc < 1) {
- if (feof(f))
+ if (feof(dtcf->file))
die("EOF reading DT blob magic number\n");
else
die("Mysterious short read reading magic number\n");
}
- magic = be32_to_cpu(magic);
+ magic = fdt32_to_cpu(magic);
if (magic != FDT_MAGIC)
die("Blob has incorrect magic number\n");
- rc = fread(&totalsize, sizeof(totalsize), 1, f);
- if (ferror(f))
+ rc = fread(&totalsize, sizeof(totalsize), 1, dtcf->file);
+ if (ferror(dtcf->file))
die("Error reading DT blob size: %s\n", strerror(errno));
if (rc < 1) {
- if (feof(f))
+ if (feof(dtcf->file))
die("EOF reading DT blob size\n");
else
die("Mysterious short read reading blob size\n");
}
- totalsize = be32_to_cpu(totalsize);
+ totalsize = fdt32_to_cpu(totalsize);
if (totalsize < FDT_V1_SIZE)
die("DT blob size (%d) is too small\n", totalsize);
blob = xmalloc(totalsize);
fdt = (struct fdt_header *)blob;
- fdt->magic = cpu_to_be32(magic);
- fdt->totalsize = cpu_to_be32(totalsize);
+ fdt->magic = cpu_to_fdt32(magic);
+ fdt->totalsize = cpu_to_fdt32(totalsize);
sizeleft = totalsize - sizeof(magic) - sizeof(totalsize);
p = blob + sizeof(magic) + sizeof(totalsize);
while (sizeleft) {
- if (feof(f))
+ if (feof(dtcf->file))
die("EOF before reading %d bytes of DT blob\n",
totalsize);
- rc = fread(p, 1, sizeleft, f);
- if (ferror(f))
+ rc = fread(p, 1, sizeleft, dtcf->file);
+ if (ferror(dtcf->file))
die("Error reading DT blob: %s\n",
strerror(errno));
@@ -893,19 +845,11 @@
p += rc;
}
- off_dt = be32_to_cpu(fdt->off_dt_struct);
- off_str = be32_to_cpu(fdt->off_dt_strings);
- off_mem_rsvmap = be32_to_cpu(fdt->off_mem_rsvmap);
- version = be32_to_cpu(fdt->version);
-
- fprintf(stderr, "\tmagic:\t\t\t0x%x\n", magic);
- fprintf(stderr, "\ttotalsize:\t\t%d\n", totalsize);
- fprintf(stderr, "\toff_dt_struct:\t\t0x%x\n", off_dt);
- fprintf(stderr, "\toff_dt_strings:\t\t0x%x\n", off_str);
- fprintf(stderr, "\toff_mem_rsvmap:\t\t0x%x\n", off_mem_rsvmap);
- fprintf(stderr, "\tversion:\t\t0x%x\n", version );
- fprintf(stderr, "\tlast_comp_version:\t0x%x\n",
- be32_to_cpu(fdt->last_comp_version));
+ off_dt = fdt32_to_cpu(fdt->off_dt_struct);
+ off_str = fdt32_to_cpu(fdt->off_dt_strings);
+ off_mem_rsvmap = fdt32_to_cpu(fdt->off_mem_rsvmap);
+ version = fdt32_to_cpu(fdt->version);
+ boot_cpuid_phys = fdt32_to_cpu(fdt->boot_cpuid_phys);
if (off_mem_rsvmap >= totalsize)
die("Mem Reserve structure offset exceeds total size\n");
@@ -916,21 +860,17 @@
if (off_str > totalsize)
die("String table offset exceeds total size\n");
- if (version >= 2)
- fprintf(stderr, "\tboot_cpuid_phys:\t0x%x\n",
- be32_to_cpu(fdt->boot_cpuid_phys));
-
- size_str = -1;
if (version >= 3) {
- size_str = be32_to_cpu(fdt->size_dt_strings);
- fprintf(stderr, "\tsize_dt_strings:\t%d\n", size_str);
+ uint32_t size_str = fdt32_to_cpu(fdt->size_dt_strings);
if (off_str+size_str > totalsize)
die("String table extends past total size\n");
+ inbuf_init(&strbuf, blob + off_str, blob + off_str + size_str);
+ } else {
+ inbuf_init(&strbuf, blob + off_str, blob + totalsize);
}
if (version >= 17) {
- size_dt = be32_to_cpu(fdt->size_dt_struct);
- fprintf(stderr, "\tsize_dt_struct:\t\t%d\n", size_dt);
+ size_dt = fdt32_to_cpu(fdt->size_dt_struct);
if (off_dt+size_dt > totalsize)
die("Structure block extends past total size\n");
}
@@ -944,10 +884,6 @@
inbuf_init(&memresvbuf,
blob + off_mem_rsvmap, blob + totalsize);
inbuf_init(&dtbuf, blob + off_dt, blob + totalsize);
- if (size_str >= 0)
- inbuf_init(&strbuf, blob + off_str, blob + off_str + size_str);
- else
- inbuf_init(&strbuf, blob + off_str, blob + totalsize);
reservelist = flat_read_mem_reserve(&memresvbuf);
@@ -964,5 +900,7 @@
free(blob);
- return build_boot_info(reservelist, tree);
+ dtc_close_file(dtcf);
+
+ return build_boot_info(reservelist, tree, boot_cpuid_phys);
}
diff --git a/arch/powerpc/boot/dtc-src/fstree.c b/arch/powerpc/boot/dtc-src/fstree.c
index 2a160a4..766b269 100644
--- a/arch/powerpc/boot/dtc-src/fstree.c
+++ b/arch/powerpc/boot/dtc-src/fstree.c
@@ -31,8 +31,8 @@
struct node *tree;
d = opendir(dirname);
- if (! d)
- die("opendir(): %s\n", strerror(errno));
+ if (!d)
+ die("Couldn't opendir() \"%s\": %s\n", dirname, strerror(errno));
tree = build_node(NULL, NULL);
@@ -87,8 +87,6 @@
tree = read_fstree(dirname);
tree = name_node(tree, "", NULL);
- fill_fullpaths(tree, "");
-
- return build_boot_info(NULL, tree);
+ return build_boot_info(NULL, tree, 0);
}
diff --git a/arch/powerpc/boot/dtc-src/libfdt_env.h b/arch/powerpc/boot/dtc-src/libfdt_env.h
new file mode 100644
index 0000000..449bf60
--- /dev/null
+++ b/arch/powerpc/boot/dtc-src/libfdt_env.h
@@ -0,0 +1,23 @@
+#ifndef _LIBFDT_ENV_H
+#define _LIBFDT_ENV_H
+
+#include <stddef.h>
+#include <stdint.h>
+#include <string.h>
+
+#define _B(n) ((unsigned long long)((uint8_t *)&x)[n])
+static inline uint32_t fdt32_to_cpu(uint32_t x)
+{
+ return (_B(0) << 24) | (_B(1) << 16) | (_B(2) << 8) | _B(3);
+}
+#define cpu_to_fdt32(x) fdt32_to_cpu(x)
+
+static inline uint64_t fdt64_to_cpu(uint64_t x)
+{
+ return (_B(0) << 56) | (_B(1) << 48) | (_B(2) << 40) | (_B(3) << 32)
+ | (_B(4) << 24) | (_B(5) << 16) | (_B(6) << 8) | _B(7);
+}
+#define cpu_to_fdt64(x) fdt64_to_cpu(x)
+#undef _B
+
+#endif /* _LIBFDT_ENV_H */
diff --git a/arch/powerpc/boot/dtc-src/livetree.c b/arch/powerpc/boot/dtc-src/livetree.c
index 6ba0846..0ca3de5 100644
--- a/arch/powerpc/boot/dtc-src/livetree.c
+++ b/arch/powerpc/boot/dtc-src/livetree.c
@@ -115,6 +115,7 @@
struct node **p;
child->next_sibling = NULL;
+ child->parent = parent;
p = &parent->children;
while (*p)
@@ -123,7 +124,8 @@
*p = child;
}
-struct reserve_info *build_reserve_entry(u64 address, u64 size, char *label)
+struct reserve_info *build_reserve_entry(uint64_t address, uint64_t size,
+ char *label)
{
struct reserve_info *new = xmalloc(sizeof(*new));
@@ -165,13 +167,14 @@
}
struct boot_info *build_boot_info(struct reserve_info *reservelist,
- struct node *tree)
+ struct node *tree, uint32_t boot_cpuid_phys)
{
struct boot_info *bi;
bi = xmalloc(sizeof(*bi));
bi->reservelist = reservelist;
bi->dt = tree;
+ bi->boot_cpuid_phys = boot_cpuid_phys;
return bi;
}
@@ -202,7 +205,7 @@
cell_t propval_cell(struct property *prop)
{
assert(prop->val.len == sizeof(cell_t));
- return be32_to_cpu(*((cell_t *)prop->val.val));
+ return fdt32_to_cpu(*((cell_t *)prop->val.val));
}
struct node *get_subnode(struct node *node, const char *nodename)
diff --git a/arch/powerpc/boot/dtc-src/srcpos.c b/arch/powerpc/boot/dtc-src/srcpos.c
index 352b0fe..9641b76 100644
--- a/arch/powerpc/boot/dtc-src/srcpos.c
+++ b/arch/powerpc/boot/dtc-src/srcpos.c
@@ -20,86 +20,97 @@
#include "dtc.h"
#include "srcpos.h"
-
-/*
- * Record the complete unique set of opened file names.
- * Primarily used to cache source position file names.
- */
-#define MAX_N_FILE_NAMES (100)
-
-const char *file_names[MAX_N_FILE_NAMES];
-static int n_file_names = 0;
-
/*
* Like yylineno, this is the current open file pos.
*/
-int srcpos_filenum = -1;
+struct dtc_file *srcpos_file;
-
-
-FILE *dtc_open_file(const char *fname)
+static int dtc_open_one(struct dtc_file *file,
+ const char *search,
+ const char *fname)
{
- FILE *f;
+ char *fullname;
- if (lookup_file_name(fname, 1) < 0)
- die("Too many files opened\n");
+ if (search) {
+ fullname = xmalloc(strlen(search) + strlen(fname) + 2);
- if (streq(fname, "-"))
- f = stdin;
- else
- f = fopen(fname, "r");
+ strcpy(fullname, search);
+ strcat(fullname, "/");
+ strcat(fullname, fname);
+ } else {
+ fullname = strdup(fname);
+ }
- if (! f)
- die("Couldn't open \"%s\": %s\n", fname, strerror(errno));
+ file->file = fopen(fullname, "r");
+ if (!file->file) {
+ free(fullname);
+ return 0;
+ }
- return f;
+ file->name = fullname;
+ return 1;
}
-
-/*
- * Locate and optionally add filename fname in the file_names[] array.
- *
- * If the filename is currently not in the array and the boolean
- * add_it is non-zero, an attempt to add the filename will be made.
- *
- * Returns;
- * Index [0..MAX_N_FILE_NAMES) where the filename is kept
- * -1 if the name can not be recorded
- */
-
-int lookup_file_name(const char *fname, int add_it)
+struct dtc_file *dtc_open_file(const char *fname,
+ const struct search_path *search)
{
- int i;
+ static const struct search_path default_search = { NULL, NULL, NULL };
- for (i = 0; i < n_file_names; i++) {
- if (strcmp(file_names[i], fname) == 0)
- return i;
+ struct dtc_file *file;
+ const char *slash;
+
+ file = xmalloc(sizeof(struct dtc_file));
+
+ slash = strrchr(fname, '/');
+ if (slash) {
+ char *dir = xmalloc(slash - fname + 1);
+
+ memcpy(dir, fname, slash - fname);
+ dir[slash - fname] = 0;
+ file->dir = dir;
+ } else {
+ file->dir = NULL;
}
- if (add_it) {
- if (n_file_names < MAX_N_FILE_NAMES) {
- file_names[n_file_names] = strdup(fname);
- return n_file_names++;
- }
+ if (streq(fname, "-")) {
+ file->name = "stdin";
+ file->file = stdin;
+ return file;
}
- return -1;
+ if (fname[0] == '/') {
+ file->file = fopen(fname, "r");
+ if (!file->file)
+ goto fail;
+
+ file->name = strdup(fname);
+ return file;
+ }
+
+ if (!search)
+ search = &default_search;
+
+ while (search) {
+ if (dtc_open_one(file, search->dir, fname))
+ return file;
+
+ if (errno != ENOENT)
+ goto fail;
+
+ search = search->next;
+ }
+
+fail:
+ die("Couldn't open \"%s\": %s\n", fname, strerror(errno));
}
-
-const char *srcpos_filename_for_num(int filenum)
+void dtc_close_file(struct dtc_file *file)
{
- if (0 <= filenum && filenum < n_file_names) {
- return file_names[filenum];
- }
+ if (fclose(file->file))
+ die("Error closing \"%s\": %s\n", file->name, strerror(errno));
- return 0;
-}
-
-
-const char *srcpos_get_filename(void)
-{
- return srcpos_filename_for_num(srcpos_filenum);
+ free(file->dir);
+ free(file);
}
diff --git a/arch/powerpc/boot/dtc-src/srcpos.h b/arch/powerpc/boot/dtc-src/srcpos.h
index ce7ab5b..e17c7c0 100644
--- a/arch/powerpc/boot/dtc-src/srcpos.h
+++ b/arch/powerpc/boot/dtc-src/srcpos.h
@@ -22,13 +22,21 @@
* array of all opened filenames.
*/
+#include <stdio.h>
+
+struct dtc_file {
+ char *dir;
+ const char *name;
+ FILE *file;
+};
+
#if ! defined(YYLTYPE) && ! defined(YYLTYPE_IS_DECLARED)
typedef struct YYLTYPE {
int first_line;
int first_column;
int last_line;
int last_column;
- int filenum;
+ struct dtc_file *file;
} YYLTYPE;
#define YYLTYPE_IS_DECLARED 1
@@ -48,7 +56,7 @@
(Current).first_column = YYRHSLOC (Rhs, 1).first_column; \
(Current).last_line = YYRHSLOC (Rhs, N).last_line; \
(Current).last_column = YYRHSLOC (Rhs, N).last_column; \
- (Current).filenum = YYRHSLOC (Rhs, N).filenum; \
+ (Current).file = YYRHSLOC (Rhs, N).file; \
} \
else \
{ \
@@ -56,20 +64,22 @@
YYRHSLOC (Rhs, 0).last_line; \
(Current).first_column = (Current).last_column = \
YYRHSLOC (Rhs, 0).last_column; \
- (Current).filenum = YYRHSLOC (Rhs, 0).filenum; \
+ (Current).file = YYRHSLOC (Rhs, 0).file; \
} \
while (YYID (0))
extern void yyerror(char const *);
+extern void yyerrorf(char const *, ...) __attribute__((format(printf, 1, 2)));
-extern int srcpos_filenum;
+extern struct dtc_file *srcpos_file;
-extern int push_input_file(const char *filename);
-extern int pop_input_file(void);
+struct search_path {
+ const char *dir; /* NULL for current directory */
+ struct search_path *prev, *next;
+};
-extern FILE *dtc_open_file(const char *fname);
-extern int lookup_file_name(const char *fname, int add_it);
-extern const char *srcpos_filename_for_num(int filenum);
-const char *srcpos_get_filename(void);
+extern struct dtc_file *dtc_open_file(const char *fname,
+ const struct search_path *search);
+extern void dtc_close_file(struct dtc_file *file);
diff --git a/arch/powerpc/boot/dtc-src/treesource.c b/arch/powerpc/boot/dtc-src/treesource.c
index a6a7767..ebeb6eb 100644
--- a/arch/powerpc/boot/dtc-src/treesource.c
+++ b/arch/powerpc/boot/dtc-src/treesource.c
@@ -23,20 +23,23 @@
extern FILE *yyin;
extern int yyparse(void);
-extern void yyerror(char const *);
struct boot_info *the_boot_info;
+int treesource_error;
struct boot_info *dt_from_source(const char *fname)
{
the_boot_info = NULL;
+ treesource_error = 0;
- push_input_file(fname);
+ srcpos_file = dtc_open_file(fname, NULL);
+ yyin = srcpos_file->file;
if (yyparse() != 0)
- return NULL;
+ die("Unable to parse input tree\n");
- fill_fullpaths(the_boot_info->dt, "");
+ if (treesource_error)
+ die("Syntax error parsing input tree\n");
return the_boot_info;
}
@@ -144,7 +147,7 @@
m = m->next;
}
- fprintf(f, "0x%x", be32_to_cpu(*cp++));
+ fprintf(f, "0x%x", fdt32_to_cpu(*cp++));
if ((void *)cp >= propend)
break;
fprintf(f, " ");
@@ -173,7 +176,7 @@
}
fprintf(f, "%02hhx", *bp++);
- if ((void *)bp >= propend)
+ if ((const void *)bp >= propend)
break;
fprintf(f, " ");
}
diff --git a/arch/powerpc/boot/dtc-src/version_gen.h b/arch/powerpc/boot/dtc-src/version_gen.h
index 6c34303..658ff424 100644
--- a/arch/powerpc/boot/dtc-src/version_gen.h
+++ b/arch/powerpc/boot/dtc-src/version_gen.h
@@ -1 +1 @@
-#define DTC_VERSION "DTC 1.0.0-gd6f9b62f"
+#define DTC_VERSION "DTC 1.2.0"
diff --git a/arch/powerpc/boot/dts/arches.dts b/arch/powerpc/boot/dts/arches.dts
new file mode 100644
index 0000000..d9113b1
--- /dev/null
+++ b/arch/powerpc/boot/dts/arches.dts
@@ -0,0 +1,293 @@
+/*
+ * Device Tree Source for AMCC Arches (dual 460GT board)
+ *
+ * (C) Copyright 2008 Applied Micro Circuits Corporation
+ * Victor Gallardo <vgallardo@amcc.com>
+ * Adam Graham <agraham@amcc.com>
+ *
+ * Based on the glacier.dts file
+ * Stefan Roese <sr@denx.de>
+ * Copyright 2008 DENX Software Engineering
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/dts-v1/;
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ model = "amcc,arches";
+ compatible = "amcc,arches";
+ dcr-parent = <&{/cpus/cpu@0}>;
+
+ aliases {
+ ethernet0 = &EMAC0;
+ ethernet1 = &EMAC1;
+ ethernet2 = &EMAC2;
+ serial0 = &UART0;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ model = "PowerPC,460GT";
+ reg = <0x00000000>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ timebase-frequency = <0>; /* Filled in by U-Boot */
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <32768>;
+ d-cache-size = <32768>;
+ dcr-controller;
+ dcr-access-method = "native";
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */
+ };
+
+ UIC0: interrupt-controller0 {
+ compatible = "ibm,uic-460gt","ibm,uic";
+ interrupt-controller;
+ cell-index = <0>;
+ dcr-reg = <0x0c0 0x009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ };
+
+ UIC1: interrupt-controller1 {
+ compatible = "ibm,uic-460gt","ibm,uic";
+ interrupt-controller;
+ cell-index = <1>;
+ dcr-reg = <0x0d0 0x009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ UIC2: interrupt-controller2 {
+ compatible = "ibm,uic-460gt","ibm,uic";
+ interrupt-controller;
+ cell-index = <2>;
+ dcr-reg = <0x0e0 0x009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ UIC3: interrupt-controller3 {
+ compatible = "ibm,uic-460gt","ibm,uic";
+ interrupt-controller;
+ cell-index = <3>;
+ dcr-reg = <0x0f0 0x009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ SDR0: sdr {
+ compatible = "ibm,sdr-460gt";
+ dcr-reg = <0x00e 0x002>;
+ };
+
+ CPR0: cpr {
+ compatible = "ibm,cpr-460gt";
+ dcr-reg = <0x00c 0x002>;
+ };
+
+ plb {
+ compatible = "ibm,plb-460gt", "ibm,plb4";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+
+ SDRAM0: sdram {
+ compatible = "ibm,sdram-460gt", "ibm,sdram-405gp";
+ dcr-reg = <0x010 0x002>;
+ };
+
+ MAL0: mcmal {
+ compatible = "ibm,mcmal-460gt", "ibm,mcmal2";
+ dcr-reg = <0x180 0x062>;
+ num-tx-chans = <3>;
+ num-rx-chans = <24>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-parent = <&UIC2>;
+ interrupts = < /*TXEOB*/ 0x6 0x4
+ /*RXEOB*/ 0x7 0x4
+ /*SERR*/ 0x3 0x4
+ /*TXDE*/ 0x4 0x4
+ /*RXDE*/ 0x5 0x4>;
+ desc-base-addr-high = <0x8>;
+ };
+
+ POB0: opb {
+ compatible = "ibm,opb-460gt", "ibm,opb";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+
+ EBC0: ebc {
+ compatible = "ibm,ebc-460gt", "ibm,ebc";
+ dcr-reg = <0x012 0x002>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ /* ranges property is supplied by U-Boot */
+ interrupts = <0x6 0x4>;
+ interrupt-parent = <&UIC1>;
+ };
+
+ UART0: serial@ef600300 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0xef600300 0x00000008>;
+ virtual-reg = <0xef600300>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ current-speed = <0>; /* Filled in by U-Boot */
+ interrupt-parent = <&UIC1>;
+ interrupts = <0x1 0x4>;
+ };
+
+ IIC0: i2c@ef600700 {
+ compatible = "ibm,iic-460gt", "ibm,iic";
+ reg = <0xef600700 0x00000014>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <0x2 0x4>;
+ };
+
+ IIC1: i2c@ef600800 {
+ compatible = "ibm,iic-460gt", "ibm,iic";
+ reg = <0xef600800 0x00000014>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <0x3 0x4>;
+ };
+
+ TAH0: emac-tah@ef601350 {
+ compatible = "ibm,tah-460gt", "ibm,tah";
+ reg = <0xef601350 0x00000030>;
+ };
+
+ TAH1: emac-tah@ef601450 {
+ compatible = "ibm,tah-460gt", "ibm,tah";
+ reg = <0xef601450 0x00000030>;
+ };
+
+ EMAC0: ethernet@ef600e00 {
+ device_type = "network";
+ compatible = "ibm,emac-460gt", "ibm,emac4sync";
+ interrupt-parent = <&EMAC0>;
+ interrupts = <0x0 0x1>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = </*Status*/ 0x0 &UIC2 0x10 0x4
+ /*Wake*/ 0x1 &UIC2 0x14 0x4>;
+ reg = <0xef600e00 0x000000c4>;
+ local-mac-address = [000000000000]; /* Filled in by U-Boot */
+ mal-device = <&MAL0>;
+ mal-tx-channel = <0>;
+ mal-rx-channel = <0>;
+ cell-index = <0>;
+ max-frame-size = <9000>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
+ phy-mode = "sgmii";
+ phy-map = <0xffffffff>;
+ gpcs-address = <0x0000000a>;
+ tah-device = <&TAH0>;
+ tah-channel = <0>;
+ has-inverted-stacr-oc;
+ has-new-stacr-staopc;
+ };
+
+ EMAC1: ethernet@ef600f00 {
+ device_type = "network";
+ compatible = "ibm,emac-460gt", "ibm,emac4sync";
+ interrupt-parent = <&EMAC1>;
+ interrupts = <0x0 0x1>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = </*Status*/ 0x0 &UIC2 0x11 0x4
+ /*Wake*/ 0x1 &UIC2 0x15 0x4>;
+ reg = <0xef600f00 0x000000c4>;
+ local-mac-address = [000000000000]; /* Filled in by U-Boot */
+ mal-device = <&MAL0>;
+ mal-tx-channel = <1>;
+ mal-rx-channel = <8>;
+ cell-index = <1>;
+ max-frame-size = <9000>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
+ phy-mode = "sgmii";
+ phy-map = <0x00000000>;
+ gpcs-address = <0x0000000b>;
+ tah-device = <&TAH1>;
+ tah-channel = <1>;
+ has-inverted-stacr-oc;
+ has-new-stacr-staopc;
+ mdio-device = <&EMAC0>;
+ };
+
+ EMAC2: ethernet@ef601100 {
+ device_type = "network";
+ compatible = "ibm,emac-460gt", "ibm,emac4sync";
+ interrupt-parent = <&EMAC2>;
+ interrupts = <0x0 0x1>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = </*Status*/ 0x0 &UIC2 0x12 0x4
+ /*Wake*/ 0x1 &UIC2 0x16 0x4>;
+ reg = <0xef601100 0x000000c4>;
+ local-mac-address = [000000000000]; /* Filled in by U-Boot */
+ mal-device = <&MAL0>;
+ mal-tx-channel = <2>;
+ mal-rx-channel = <16>;
+ cell-index = <2>;
+ max-frame-size = <9000>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
+ phy-mode = "sgmii";
+ phy-map = <0x00000001>;
+ gpcs-address = <0x0000000C>;
+ has-inverted-stacr-oc;
+ has-new-stacr-staopc;
+ mdio-device = <&EMAC0>;
+ };
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/asp834x-redboot.dts b/arch/powerpc/boot/dts/asp834x-redboot.dts
index 8b1bb0e..6235fca 100644
--- a/arch/powerpc/boot/dts/asp834x-redboot.dts
+++ b/arch/powerpc/boot/dts/asp834x-redboot.dts
@@ -130,24 +130,28 @@
dma-channel@0 {
compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel";
reg = <0 0x80>;
+ cell-index = <0>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
dma-channel@80 {
compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel";
reg = <0x80 0x80>;
+ cell-index = <1>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
dma-channel@100 {
compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel";
reg = <0x100 0x80>;
+ cell-index = <2>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
dma-channel@180 {
compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel";
reg = <0x180 0x28>;
+ cell-index = <3>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
diff --git a/arch/powerpc/boot/dts/gef_sbc610.dts b/arch/powerpc/boot/dts/gef_sbc610.dts
new file mode 100644
index 0000000..6ed6083
--- /dev/null
+++ b/arch/powerpc/boot/dts/gef_sbc610.dts
@@ -0,0 +1,293 @@
+/*
+ * GE Fanuc SBC610 Device Tree Source
+ *
+ * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * Based on: SBS CM6 Device Tree Source
+ * Copyright 2007 SBS Technologies GmbH & Co. KG
+ * And: mpc8641_hpcn.dts (MPC8641 HPCN Device Tree Source)
+ * Copyright 2006 Freescale Semiconductor Inc.
+ */
+
+/*
+ * Compiled with dtc -I dts -O dtb -o gef_sbc610.dtb gef_sbc610.dts
+ */
+
+/dts-v1/;
+
+/ {
+ model = "GEF_SBC610";
+ compatible = "gef,sbc610";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ aliases {
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ serial0 = &serial0;
+ serial1 = &serial1;
+ pci0 = &pci0;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,8641@0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <32>; // 32 bytes
+ i-cache-line-size = <32>; // 32 bytes
+ d-cache-size = <32768>; // L1, 32K
+ i-cache-size = <32768>; // L1, 32K
+ timebase-frequency = <0>; // From uboot
+ bus-frequency = <0>; // From uboot
+ clock-frequency = <0>; // From uboot
+ };
+ PowerPC,8641@1 {
+ device_type = "cpu";
+ reg = <1>;
+ d-cache-line-size = <32>; // 32 bytes
+ i-cache-line-size = <32>; // 32 bytes
+ d-cache-size = <32768>; // L1, 32K
+ i-cache-size = <32768>; // L1, 32K
+ timebase-frequency = <0>; // From uboot
+ bus-frequency = <0>; // From uboot
+ clock-frequency = <0>; // From uboot
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x40000000>; // set by uboot
+ };
+
+ localbus@fef05000 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8641-localbus", "simple-bus";
+ reg = <0xf8005000 0x1000>;
+ interrupts = <19 2>;
+ interrupt-parent = <&mpic>;
+
+ ranges = <0 0 0xff000000 0x01000000 // 16MB Boot flash
+ 1 0 0xe8000000 0x08000000 // Paged Flash 0
+ 2 0 0xe0000000 0x08000000 // Paged Flash 1
+ 3 0 0xfc100000 0x00020000 // NVRAM
+ 4 0 0xfc000000 0x00008000 // FPGA
+ 5 0 0xfc008000 0x00008000 // AFIX FPGA
+ 6 0 0xfd000000 0x00800000 // IO FPGA (8-bit)
+ 7 0 0xfd800000 0x00800000>; // IO FPGA (32-bit)
+
+ fpga@4,0 {
+ compatible = "gef,fpga-regs";
+ reg = <0x4 0x0 0x40>;
+ };
+ gef_pic: pic@4,4000 {
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ compatible = "gef,fpga-pic";
+ reg = <0x4 0x4000 0x20>;
+ interrupts = <0x8
+ 0x9>;
+ interrupt-parent = <&mpic>;
+
+ };
+ };
+
+ soc@fef00000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #interrupt-cells = <2>;
+ device_type = "soc";
+ compatible = "simple-bus";
+ ranges = <0x0 0xfef00000 0x00100000>;
+ reg = <0xfef00000 0x100000>; // CCSRBAR 1M
+ bus-frequency = <0>;
+
+ i2c1: i2c@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl-i2c";
+ reg = <0x3000 0x100>;
+ interrupts = <0x2b 0x2>;
+ interrupt-parent = <&mpic>;
+ dfsrr;
+
+ eti@6b {
+ compatible = "dallas,ds1682";
+ reg = <0x6b>;
+ };
+ };
+
+ i2c2: i2c@3100 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl-i2c";
+ reg = <0x3100 0x100>;
+ interrupts = <0x2b 0x2>;
+ interrupt-parent = <&mpic>;
+ dfsrr;
+ };
+
+ dma@21300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma";
+ reg = <0x21300 0x4>;
+ ranges = <0x0 0x21100 0x200>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8641-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <20 2>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8641-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <21 2>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8641-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&mpic>;
+ interrupts = <22 2>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8641-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupt-parent = <&mpic>;
+ interrupts = <23 2>;
+ };
+ };
+
+ mdio@24520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x24520 0x20>;
+
+ phy0: ethernet-phy@0 {
+ interrupt-parent = <&gef_pic>;
+ interrupts = <0x9 0x4>;
+ reg = <1>;
+ };
+ phy2: ethernet-phy@2 {
+ interrupt-parent = <&gef_pic>;
+ interrupts = <0x8 0x4>;
+ reg = <3>;
+ };
+ };
+
+ enet0: ethernet@24000 {
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x24000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
+ interrupt-parent = <&mpic>;
+ phy-handle = <&phy0>;
+ phy-connection-type = "gmii";
+ };
+
+ enet1: ethernet@26000 {
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x26000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <0x1f 0x2 0x20 0x2 0x21 0x2>;
+ interrupt-parent = <&mpic>;
+ phy-handle = <&phy2>;
+ phy-connection-type = "gmii";
+ };
+
+ serial0: serial@4500 {
+ cell-index = <0>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4500 0x100>;
+ clock-frequency = <0>;
+ interrupts = <0x2a 0x2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ serial1: serial@4600 {
+ cell-index = <1>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4600 0x100>;
+ clock-frequency = <0>;
+ interrupts = <0x1c 0x2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ mpic: pic@40000 {
+ clock-frequency = <0>;
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <0x40000 0x40000>;
+ compatible = "chrp,open-pic";
+ device_type = "open-pic";
+ };
+
+ global-utilities@e0000 {
+ compatible = "fsl,mpc8641-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+ };
+
+ pci0: pcie@fef08000 {
+ compatible = "fsl,mpc8641-pcie";
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0xfef08000 0x1000>;
+ bus-range = <0x0 0xff>;
+ ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x40000000
+ 0x01000000 0x0 0x00000000 0xfe000000 0x0 0x00400000>;
+ clock-frequency = <33333333>;
+ interrupt-parent = <&mpic>;
+ interrupts = <0x18 0x2>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ interrupt-map = <
+ 0x0000 0x0 0x0 0x1 &mpic 0x0 0x1
+ 0x0000 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0x0000 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0x0000 0x0 0x0 0x4 &mpic 0x3 0x1
+ >;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ ranges = <0x02000000 0x0 0x80000000
+ 0x02000000 0x0 0x80000000
+ 0x0 0x40000000
+
+ 0x01000000 0x0 0x00000000
+ 0x01000000 0x0 0x00000000
+ 0x0 0x00400000>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/glacier.dts b/arch/powerpc/boot/dts/glacier.dts
index 24cf0db..f3787a2 100644
--- a/arch/powerpc/boot/dts/glacier.dts
+++ b/arch/powerpc/boot/dts/glacier.dts
@@ -14,7 +14,7 @@
#address-cells = <2>;
#size-cells = <1>;
model = "amcc,glacier";
- compatible = "amcc,glacier", "amcc,canyonlands";
+ compatible = "amcc,glacier";
dcr-parent = <&{/cpus/cpu@0}>;
aliases {
diff --git a/arch/powerpc/boot/dts/mgcoge.dts b/arch/powerpc/boot/dts/mgcoge.dts
new file mode 100644
index 0000000..633255a
--- /dev/null
+++ b/arch/powerpc/boot/dts/mgcoge.dts
@@ -0,0 +1,174 @@
+/*
+ * Device Tree for the MGCOGE plattform from keymile
+ *
+ * Copyright 2008 DENX Software Engineering GmbH
+ * Heiko Schocher <hs@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+/ {
+ model = "MGCOGE";
+ compatible = "keymile,mgcoge";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ aliases {
+ ethernet0 = ð0;
+ serial0 = &smc2;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,8247@0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <32>;
+ i-cache-line-size = <32>;
+ d-cache-size = <16384>;
+ i-cache-size = <16384>;
+ timebase-frequency = <0>; /* Filled in by U-Boot */
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ bus-frequency = <0>; /* Filled in by U-Boot */
+ };
+ };
+
+ localbus@f0010100 {
+ compatible = "fsl,mpc8247-localbus",
+ "fsl,pq2-localbus",
+ "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ reg = <0xf0010100 0x40>;
+
+ ranges = <0 0 0xfe000000 0x00400000
+ 5 0 0x50000000 0x20000000
+ >; /* Filled in by U-Boot */
+
+ flash@0,0 {
+ compatible = "cfi-flash";
+ reg = <0 0x0 0x400000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ bank-width = <1>;
+ device-width = <1>;
+ partition@0 {
+ label = "u-boot";
+ reg = <0 0x40000>;
+ };
+ partition@40000 {
+ label = "env";
+ reg = <0x40000 0x20000>;
+ };
+ partition@60000 {
+ label = "kernel";
+ reg = <0x60000 0x220000>;
+ };
+ partition@280000 {
+ label = "dtb";
+ reg = <0x280000 0x20000>;
+ };
+ };
+
+ flash@5,0 {
+ compatible = "cfi-flash";
+ reg = <5 0x0 0x2000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ bank-width = <2>;
+ device-width = <2>;
+ partition@0 {
+ label = "ramdisk";
+ reg = <0 0x7a0000>;
+ };
+ partition@7a0000 {
+ label = "user";
+ reg = <0x7a0000 0x1860000>;
+ };
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0 0>; /* Filled in by U-Boot */
+ };
+
+ soc@f0000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8247-immr", "fsl,pq2-soc", "simple-bus";
+ ranges = <0x00000000 0xf0000000 0x00053000>;
+
+ // Temporary until code stops depending on it.
+ device_type = "soc";
+
+ cpm@119c0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #interrupt-cells = <2>;
+ compatible = "fsl,mpc8247-cpm", "fsl,cpm2",
+ "simple-bus";
+ reg = <0x119c0 0x30>;
+ ranges;
+
+ muram {
+ compatible = "fsl,cpm-muram";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0x10000>;
+
+ data@0 {
+ compatible = "fsl,cpm-muram-data";
+ reg = <0x80 0x1f80 0x9800 0x800>;
+ };
+ };
+
+ brg@119f0 {
+ compatible = "fsl,mpc8247-brg",
+ "fsl,cpm2-brg",
+ "fsl,cpm-brg";
+ reg = <0x119f0 0x10 0x115f0 0x10>;
+ };
+
+ /* Monitor port/SMC2 */
+ smc2: serial@11a90 {
+ device_type = "serial";
+ compatible = "fsl,mpc8247-smc-uart",
+ "fsl,cpm2-smc-uart";
+ reg = <0x11a90 0x20 0x88fc 0x02>;
+ interrupts = <5 8>;
+ interrupt-parent = <&PIC>;
+ fsl,cpm-brg = <2>;
+ fsl,cpm-command = <0x21200000>;
+ current-speed = <0>; /* Filled in by U-Boot */
+ };
+
+ eth0: ethernet@11a60 {
+ device_type = "network";
+ compatible = "fsl,mpc8247-scc-enet",
+ "fsl,cpm2-scc-enet";
+ reg = <0x11a60 0x20 0x8300 0x100 0x11390 1>;
+ local-mac-address = [ 00 00 00 00 00 00 ]; /* Filled in by U-Boot */
+ interrupts = <43 8>;
+ interrupt-parent = <&PIC>;
+ linux,network-index = <0>;
+ fsl,cpm-command = <0xce00000>;
+ fixed-link = <0 0 10 0 0>;
+ };
+
+ };
+
+ PIC: interrupt-controller@10c00 {
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ reg = <0x10c00 0x80>;
+ compatible = "fsl,mpc8247-pic", "fsl,pq2-pic";
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/mgsuvd.dts b/arch/powerpc/boot/dts/mgsuvd.dts
new file mode 100644
index 0000000..e4fc53a
--- /dev/null
+++ b/arch/powerpc/boot/dts/mgsuvd.dts
@@ -0,0 +1,163 @@
+/*
+ * MGSUVD Device Tree Source
+ *
+ * Copyright 2008 DENX Software Engineering GmbH
+ * Heiko Schocher <hs@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+/ {
+ model = "MGSUVD";
+ compatible = "keymile,mgsuvd";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,852@0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <16>;
+ i-cache-line-size = <16>;
+ d-cache-size = <8192>;
+ i-cache-size = <8192>;
+ timebase-frequency = <0>; /* Filled in by u-boot */
+ bus-frequency = <0>; /* Filled in by u-boot */
+ clock-frequency = <0>; /* Filled in by u-boot */
+ interrupts = <15 2>; /* decrementer interrupt */
+ interrupt-parent = <&PIC>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <00000000 0x4000000>; /* Filled in by u-boot */
+ };
+
+ localbus@fff00100 {
+ compatible = "fsl,mpc852-localbus", "fsl,pq1-localbus", "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ reg = <0xfff00100 0x40>;
+
+ ranges = <0 0 0xf0000000 0x01000000>; /* Filled in by u-boot */
+
+ flash@0,0 {
+ compatible = "cfi-flash";
+ reg = <0 0 0x1000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ bank-width = <1>;
+ device-width = <1>;
+ partition@0 {
+ label = "u-boot";
+ reg = <0 0x80000>;
+ };
+ partition@80000 {
+ label = "env";
+ reg = <0x80000 0x20000>;
+ };
+ partition@a0000 {
+ label = "kernel";
+ reg = <0xa0000 0x1e0000>;
+ };
+ partition@280000 {
+ label = "dtb";
+ reg = <0x280000 0x20000>;
+ };
+ partition@2a0000 {
+ label = "root";
+ reg = <0x2a0000 0x500000>;
+ };
+ partition@7a0000 {
+ label = "user";
+ reg = <0x7a0000 0x860000>;
+ };
+ };
+ };
+
+ soc@fff00000 {
+ compatible = "fsl,mpc852", "fsl,pq1-soc", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ ranges = <0 0xfff00000 0x00004000>;
+
+ PIC: interrupt-controller@0 {
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0 24>;
+ compatible = "fsl,mpc852-pic", "fsl,pq1-pic";
+ };
+
+ cpm@9c0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc852-cpm", "fsl,cpm1", "simple-bus";
+ interrupts = <0>; /* cpm error interrupt */
+ interrupt-parent = <&CPM_PIC>;
+ reg = <0x9c0 10>;
+ ranges;
+
+ muram@2000 {
+ compatible = "fsl,cpm-muram";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x2000 0x2000>;
+
+ data@0 {
+ compatible = "fsl,cpm-muram-data";
+ reg = <0x800 0x1800>;
+ };
+ };
+
+ brg@9f0 {
+ compatible = "fsl,mpc852-brg",
+ "fsl,cpm1-brg",
+ "fsl,cpm-brg";
+ reg = <0x9f0 0x10>;
+ clock-frequency = <0>; /* Filled in by u-boot */
+ };
+
+ CPM_PIC: interrupt-controller@930 {
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupts = <5 2 0 2>;
+ interrupt-parent = <&PIC>;
+ reg = <0x930 0x20>;
+ compatible = "fsl,cpm1-pic";
+ };
+
+ /* MON-1 */
+ serial@a80 {
+ device_type = "serial";
+ compatible = "fsl,cpm1-smc-uart";
+ reg = <0xa80 0x10 0x3fc0 0x40>;
+ interrupts = <4>;
+ interrupt-parent = <&CPM_PIC>;
+ fsl,cpm-brg = <1>;
+ fsl,cpm-command = <0x0090>;
+ current-speed = <0>; /* Filled in by u-boot */
+ };
+
+ ethernet@a40 {
+ device_type = "network";
+ compatible = "fsl,mpc866-scc-enet",
+ "fsl,cpm1-scc-enet";
+ reg = <0xa40 0x18 0x3e00 0x100>;
+ local-mac-address = [ 00 00 00 00 00 00 ]; /* Filled in by u-boot */
+ interrupts = <28>;
+ interrupt-parent = <&CPM_PIC>;
+ fsl,cpm-command = <0x80>;
+ fixed-link = <0 0 10 0 0>;
+ };
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/mpc5121ads.dts b/arch/powerpc/boot/dts/mpc5121ads.dts
index 1f9036c3..c2b8dbf 100644
--- a/arch/powerpc/boot/dts/mpc5121ads.dts
+++ b/arch/powerpc/boot/dts/mpc5121ads.dts
@@ -403,7 +403,8 @@
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <0x80008500 0x100>;
+ reg = <0x80008500 0x100 /* internal registers */
+ 0x80008300 0x8>; /* config space access registers */
compatible = "fsl,mpc5121-pci";
device_type = "pci";
};
diff --git a/arch/powerpc/boot/dts/mpc8313erdb.dts b/arch/powerpc/boot/dts/mpc8313erdb.dts
index 2a94ae0..747f276 100644
--- a/arch/powerpc/boot/dts/mpc8313erdb.dts
+++ b/arch/powerpc/boot/dts/mpc8313erdb.dts
@@ -176,24 +176,28 @@
dma-channel@0 {
compatible = "fsl,mpc8313-dma-channel", "fsl,elo-dma-channel";
reg = <0 0x80>;
+ cell-index = <0>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
dma-channel@80 {
compatible = "fsl,mpc8313-dma-channel", "fsl,elo-dma-channel";
reg = <0x80 0x80>;
+ cell-index = <1>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
dma-channel@100 {
compatible = "fsl,mpc8313-dma-channel", "fsl,elo-dma-channel";
reg = <0x100 0x80>;
+ cell-index = <2>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
dma-channel@180 {
compatible = "fsl,mpc8313-dma-channel", "fsl,elo-dma-channel";
reg = <0x180 0x28>;
+ cell-index = <3>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
@@ -359,7 +363,8 @@
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <0xe0008500 0x100>;
+ reg = <0xe0008500 0x100 /* internal registers */
+ 0xe0008300 0x8>; /* config space access registers */
compatible = "fsl,mpc8349-pci";
device_type = "pci";
};
diff --git a/arch/powerpc/boot/dts/mpc8315erdb.dts b/arch/powerpc/boot/dts/mpc8315erdb.dts
index f704513..7449e54c 100644
--- a/arch/powerpc/boot/dts/mpc8315erdb.dts
+++ b/arch/powerpc/boot/dts/mpc8315erdb.dts
@@ -144,24 +144,28 @@
dma-channel@0 {
compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel";
reg = <0 0x80>;
+ cell-index = <0>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
dma-channel@80 {
compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel";
reg = <0x80 0x80>;
+ cell-index = <1>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
dma-channel@100 {
compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel";
reg = <0x100 0x80>;
+ cell-index = <2>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
dma-channel@180 {
compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel";
reg = <0x180 0x28>;
+ cell-index = <3>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
@@ -314,7 +318,8 @@
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <0xe0008500 0x100>;
+ reg = <0xe0008500 0x100 /* internal registers */
+ 0xe0008300 0x8>; /* config space access registers */
compatible = "fsl,mpc8349-pci";
device_type = "pci";
};
diff --git a/arch/powerpc/boot/dts/mpc832x_mds.dts b/arch/powerpc/boot/dts/mpc832x_mds.dts
index fbc9304..e4cc176 100644
--- a/arch/powerpc/boot/dts/mpc832x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc832x_mds.dts
@@ -127,24 +127,28 @@
dma-channel@0 {
compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
reg = <0 0x80>;
+ cell-index = <0>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
dma-channel@80 {
compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
reg = <0x80 0x80>;
+ cell-index = <1>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
dma-channel@100 {
compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
reg = <0x100 0x80>;
+ cell-index = <2>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
dma-channel@180 {
compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
reg = <0x180 0x28>;
+ cell-index = <3>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
@@ -419,7 +423,8 @@
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <0xe0008500 0x100>;
+ reg = <0xe0008500 0x100 /* internal registers */
+ 0xe0008300 0x8>; /* config space access registers */
compatible = "fsl,mpc8349-pci";
device_type = "pci";
};
diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts
index b157d18..226ff06 100644
--- a/arch/powerpc/boot/dts/mpc832x_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts
@@ -105,24 +105,28 @@
dma-channel@0 {
compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
reg = <0 0x80>;
+ cell-index = <0>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
dma-channel@80 {
compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
reg = <0x80 0x80>;
+ cell-index = <1>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
dma-channel@100 {
compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
reg = <0x100 0x80>;
+ cell-index = <2>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
dma-channel@180 {
compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
reg = <0x180 0x28>;
+ cell-index = <3>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
@@ -327,7 +331,8 @@
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <0xe0008500 0x100>;
+ reg = <0xe0008500 0x100 /* internal registers */
+ 0xe0008300 0x8>; /* config space access registers */
compatible = "fsl,mpc8349-pci";
device_type = "pci";
};
diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts
index 700e076..5cedf37 100644
--- a/arch/powerpc/boot/dts/mpc8349emitx.dts
+++ b/arch/powerpc/boot/dts/mpc8349emitx.dts
@@ -106,24 +106,28 @@
dma-channel@0 {
compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
reg = <0 0x80>;
+ cell-index = <0>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
dma-channel@80 {
compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
reg = <0x80 0x80>;
+ cell-index = <1>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
dma-channel@100 {
compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
reg = <0x100 0x80>;
+ cell-index = <2>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
dma-channel@180 {
compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
reg = <0x180 0x28>;
+ cell-index = <3>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
@@ -250,7 +254,8 @@
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <0xe0008500 0x100>;
+ reg = <0xe0008500 0x100 /* internal registers */
+ 0xe0008300 0x8>; /* config space access registers */
compatible = "fsl,mpc8349-pci";
device_type = "pci";
};
@@ -276,7 +281,8 @@
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <0xe0008600 0x100>;
+ reg = <0xe0008600 0x100 /* internal registers */
+ 0xe0008380 0x8>; /* config space access registers */
compatible = "fsl,mpc8349-pci";
device_type = "pci";
};
diff --git a/arch/powerpc/boot/dts/mpc8349emitxgp.dts b/arch/powerpc/boot/dts/mpc8349emitxgp.dts
index cdd3063..81ae1d3 100644
--- a/arch/powerpc/boot/dts/mpc8349emitxgp.dts
+++ b/arch/powerpc/boot/dts/mpc8349emitxgp.dts
@@ -104,24 +104,28 @@
dma-channel@0 {
compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
reg = <0 0x80>;
+ cell-index = <0>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
dma-channel@80 {
compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
reg = <0x80 0x80>;
+ cell-index = <1>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
dma-channel@100 {
compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
reg = <0x100 0x80>;
+ cell-index = <2>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
dma-channel@180 {
compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
reg = <0x180 0x28>;
+ cell-index = <3>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
@@ -224,7 +228,8 @@
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <0xe0008600 0x100>;
+ reg = <0xe0008600 0x100 /* internal registers */
+ 0xe0008380 0x8>; /* config space access registers */
compatible = "fsl,mpc8349-pci";
device_type = "pci";
};
diff --git a/arch/powerpc/boot/dts/mpc834x_mds.dts b/arch/powerpc/boot/dts/mpc834x_mds.dts
index 783241c..04bfde3 100644
--- a/arch/powerpc/boot/dts/mpc834x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc834x_mds.dts
@@ -116,24 +116,28 @@
dma-channel@0 {
compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
reg = <0 0x80>;
+ cell-index = <0>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
dma-channel@80 {
compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
reg = <0x80 0x80>;
+ cell-index = <1>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
dma-channel@100 {
compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
reg = <0x100 0x80>;
+ cell-index = <2>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
dma-channel@180 {
compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
reg = <0x180 0x28>;
+ cell-index = <3>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
@@ -311,7 +315,8 @@
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <0xe0008500 0x100>;
+ reg = <0xe0008500 0x100 /* internal registers */
+ 0xe0008300 0x8>; /* config space access registers */
compatible = "fsl,mpc8349-pci";
device_type = "pci";
};
@@ -372,7 +377,8 @@
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <0xe0008600 0x100>;
+ reg = <0xe0008600 0x100 /* internal registers */
+ 0xe0008380 0x8>; /* config space access registers */
compatible = "fsl,mpc8349-pci";
device_type = "pci";
};
diff --git a/arch/powerpc/boot/dts/mpc836x_mds.dts b/arch/powerpc/boot/dts/mpc836x_mds.dts
index a3b76a7..66a12d2 100644
--- a/arch/powerpc/boot/dts/mpc836x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc836x_mds.dts
@@ -52,9 +52,26 @@
reg = <0x00000000 0x10000000>;
};
- bcsr@f8000000 {
- device_type = "board-control";
- reg = <0xf8000000 0x8000>;
+ localbus@e0005000 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8360-localbus", "fsl,pq2pro-localbus",
+ "simple-bus";
+ reg = <0xe0005000 0xd8>;
+ ranges = <0 0 0xfe000000 0x02000000
+ 1 0 0xf8000000 0x00008000>;
+
+ flash@0,0 {
+ compatible = "cfi-flash";
+ reg = <0 0 0x2000000>;
+ bank-width = <2>;
+ device-width = <1>;
+ };
+
+ bcsr@1,0 {
+ device_type = "board-control";
+ reg = <1 0 0x8000>;
+ };
};
soc8360@e0000000 {
@@ -131,24 +148,28 @@
dma-channel@0 {
compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
reg = <0 0x80>;
+ cell-index = <0>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
dma-channel@80 {
compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
reg = <0x80 0x80>;
+ cell-index = <1>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
dma-channel@100 {
compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
reg = <0x100 0x80>;
+ cell-index = <2>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
dma-channel@180 {
compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
reg = <0x180 0x28>;
+ cell-index = <3>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
@@ -405,7 +426,8 @@
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <0xe0008500 0x100>;
+ reg = <0xe0008500 0x100 /* internal registers */
+ 0xe0008300 0x8>; /* config space access registers */
compatible = "fsl,mpc8349-pci";
device_type = "pci";
};
diff --git a/arch/powerpc/boot/dts/mpc836x_rdk.dts b/arch/powerpc/boot/dts/mpc836x_rdk.dts
index 89c9202..decadf3 100644
--- a/arch/powerpc/boot/dts/mpc836x_rdk.dts
+++ b/arch/powerpc/boot/dts/mpc836x_rdk.dts
@@ -125,24 +125,28 @@
dma-channel@0 {
compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
reg = <0 0x80>;
+ cell-index = <0>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
dma-channel@80 {
compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
reg = <0x80 0x80>;
+ cell-index = <1>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
dma-channel@100 {
compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
reg = <0x100 0x80>;
+ cell-index = <2>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
dma-channel@180 {
compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
reg = <0x180 0x28>;
+ cell-index = <3>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
@@ -383,6 +387,18 @@
device-width = <1>;
};
+ upm@1,0 {
+ compatible = "fsl,upm-nand";
+ reg = <1 0 1>;
+ fsl,upm-addr-offset = <16>;
+ fsl,upm-cmd-offset = <8>;
+ gpios = <&qe_pio_e 18 0>;
+
+ flash {
+ compatible = "stm,nand512-a";
+ };
+ };
+
display@2,0 {
device_type = "display";
compatible = "fujitsu,MB86277", "fujitsu,mint";
@@ -405,7 +421,8 @@
#interrupt-cells = <1>;
device_type = "pci";
compatible = "fsl,mpc8360-pci", "fsl,mpc8349-pci";
- reg = <0xe0008500 0x100>;
+ reg = <0xe0008500 0x100 /* internal registers */
+ 0xe0008300 0x8>; /* config space access registers */
ranges = <0x02000000 0 0x90000000 0x90000000 0 0x10000000
0x42000000 0 0x80000000 0x80000000 0 0x10000000
0x01000000 0 0xe0300000 0xe0300000 0 0x00100000>;
diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts b/arch/powerpc/boot/dts/mpc8377_mds.dts
index 432782b..0484561 100644
--- a/arch/powerpc/boot/dts/mpc8377_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8377_mds.dts
@@ -136,6 +136,13 @@
interrupts = <14 0x8>;
interrupt-parent = <&ipic>;
dfsrr;
+
+ rtc@68 {
+ compatible = "dallas,ds1374";
+ reg = <0x68>;
+ interrupts = <19 0x8>;
+ interrupt-parent = <&ipic>;
+ };
};
i2c@3100 {
@@ -246,24 +253,28 @@
dma-channel@0 {
compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
reg = <0 0x80>;
+ cell-index = <0>;
interrupt-parent = <&ipic>;
interrupts = <0x47 8>;
};
dma-channel@80 {
compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
reg = <0x80 0x80>;
+ cell-index = <1>;
interrupt-parent = <&ipic>;
interrupts = <0x47 8>;
};
dma-channel@100 {
compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
reg = <0x100 0x80>;
+ cell-index = <2>;
interrupt-parent = <&ipic>;
interrupts = <0x47 8>;
};
dma-channel@180 {
compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
reg = <0x180 0x28>;
+ cell-index = <3>;
interrupt-parent = <&ipic>;
interrupts = <0x47 8>;
};
@@ -374,7 +385,8 @@
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <0xe0008500 0x100>;
+ reg = <0xe0008500 0x100 /* internal registers */
+ 0xe0008300 0x8>; /* config space access registers */
compatible = "fsl,mpc8349-pci";
device_type = "pci";
};
diff --git a/arch/powerpc/boot/dts/mpc8377_rdb.dts b/arch/powerpc/boot/dts/mpc8377_rdb.dts
index ed137aa..53191ba 100644
--- a/arch/powerpc/boot/dts/mpc8377_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8377_rdb.dts
@@ -155,24 +155,28 @@
dma-channel@0 {
compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
reg = <0 0x80>;
+ cell-index = <0>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
dma-channel@80 {
compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
reg = <0x80 0x80>;
+ cell-index = <1>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
dma-channel@100 {
compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
reg = <0x100 0x80>;
+ cell-index = <2>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
dma-channel@180 {
compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
reg = <0x180 0x28>;
+ cell-index = <3>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
@@ -315,7 +319,8 @@
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <0xe0008500 0x100>;
+ reg = <0xe0008500 0x100 /* internal registers */
+ 0xe0008300 0x8>; /* config space access registers */
compatible = "fsl,mpc8349-pci";
device_type = "pci";
};
diff --git a/arch/powerpc/boot/dts/mpc8378_mds.dts b/arch/powerpc/boot/dts/mpc8378_mds.dts
index ed32c8d..67a08d2 100644
--- a/arch/powerpc/boot/dts/mpc8378_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8378_mds.dts
@@ -136,6 +136,13 @@
interrupts = <14 0x8>;
interrupt-parent = <&ipic>;
dfsrr;
+
+ rtc@68 {
+ compatible = "dallas,ds1374";
+ reg = <0x68>;
+ interrupts = <19 0x8>;
+ interrupt-parent = <&ipic>;
+ };
};
i2c@3100 {
@@ -170,24 +177,28 @@
dma-channel@0 {
compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
reg = <0 0x80>;
+ cell-index = <0>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
dma-channel@80 {
compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
reg = <0x80 0x80>;
+ cell-index = <1>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
dma-channel@100 {
compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
reg = <0x100 0x80>;
+ cell-index = <2>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
dma-channel@180 {
compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
reg = <0x180 0x28>;
+ cell-index = <3>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
@@ -360,7 +371,8 @@
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <0xe0008500 0x100>;
+ reg = <0xe0008500 0x100 /* internal registers */
+ 0xe0008300 0x8>; /* config space access registers */
compatible = "fsl,mpc8349-pci";
device_type = "pci";
};
diff --git a/arch/powerpc/boot/dts/mpc8378_rdb.dts b/arch/powerpc/boot/dts/mpc8378_rdb.dts
index 34a7f2f..4a09153 100644
--- a/arch/powerpc/boot/dts/mpc8378_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8378_rdb.dts
@@ -155,24 +155,28 @@
dma-channel@0 {
compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
reg = <0 0x80>;
+ cell-index = <0>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
dma-channel@80 {
compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
reg = <0x80 0x80>;
+ cell-index = <1>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
dma-channel@100 {
compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
reg = <0x100 0x80>;
+ cell-index = <2>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
dma-channel@180 {
compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
reg = <0x180 0x28>;
+ cell-index = <3>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
@@ -301,7 +305,8 @@
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <0xe0008500 0x100>;
+ reg = <0xe0008500 0x100 /* internal registers */
+ 0xe0008300 0x8>; /* config space access registers */
compatible = "fsl,mpc8349-pci";
device_type = "pci";
};
diff --git a/arch/powerpc/boot/dts/mpc8379_mds.dts b/arch/powerpc/boot/dts/mpc8379_mds.dts
index f4db9ed..323370a 100644
--- a/arch/powerpc/boot/dts/mpc8379_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8379_mds.dts
@@ -136,6 +136,13 @@
interrupts = <14 0x8>;
interrupt-parent = <&ipic>;
dfsrr;
+
+ rtc@68 {
+ compatible = "dallas,ds1374";
+ reg = <0x68>;
+ interrupts = <19 0x8>;
+ interrupt-parent = <&ipic>;
+ };
};
i2c@3100 {
@@ -170,24 +177,28 @@
dma-channel@0 {
compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
reg = <0 0x80>;
+ cell-index = <0>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
dma-channel@80 {
compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
reg = <0x80 0x80>;
+ cell-index = <1>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
dma-channel@100 {
compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
reg = <0x100 0x80>;
+ cell-index = <2>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
dma-channel@180 {
compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
reg = <0x180 0x28>;
+ cell-index = <3>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
@@ -388,7 +399,8 @@
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <0xe0008500 0x100>;
+ reg = <0xe0008500 0x100 /* internal registers */
+ 0xe0008300 0x8>; /* config space access registers */
compatible = "fsl,mpc8349-pci";
device_type = "pci";
};
diff --git a/arch/powerpc/boot/dts/mpc8379_rdb.dts b/arch/powerpc/boot/dts/mpc8379_rdb.dts
index e4d7030..bbd884a 100644
--- a/arch/powerpc/boot/dts/mpc8379_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8379_rdb.dts
@@ -155,24 +155,28 @@
dma-channel@0 {
compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
reg = <0 0x80>;
+ cell-index = <0>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
dma-channel@80 {
compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
reg = <0x80 0x80>;
+ cell-index = <1>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
dma-channel@100 {
compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
reg = <0x100 0x80>;
+ cell-index = <2>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
dma-channel@180 {
compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
reg = <0x180 0x28>;
+ cell-index = <3>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
@@ -329,7 +333,8 @@
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <0xe0008500 0x100>;
+ reg = <0xe0008500 0x100 /* internal registers */
+ 0xe0008300 0x8>; /* config space access registers */
compatible = "fsl,mpc8349-pci";
device_type = "pci";
};
diff --git a/arch/powerpc/boot/dts/mpc8536ds.dts b/arch/powerpc/boot/dts/mpc8536ds.dts
index 1505d68..93fdd99 100644
--- a/arch/powerpc/boot/dts/mpc8536ds.dts
+++ b/arch/powerpc/boot/dts/mpc8536ds.dts
@@ -91,6 +91,8 @@
rtc@68 {
compatible = "dallas,ds3232";
reg = <0x68>;
+ interrupts = <0 0x1>;
+ interrupt-parent = <&mpic>;
};
};
diff --git a/arch/powerpc/boot/dts/mpc8610_hpcd.dts b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
index 584a4f1..f724d72 100644
--- a/arch/powerpc/boot/dts/mpc8610_hpcd.dts
+++ b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
@@ -207,7 +207,7 @@
reg = <0xe4000 0x100>;
};
- i2s@16000 {
+ ssi@16000 {
compatible = "fsl,mpc8610-ssi";
cell-index = <0>;
reg = <0x16000 0x100>;
@@ -215,6 +215,8 @@
interrupts = <62 2>;
fsl,mode = "i2s-slave";
codec-handle = <&cs4270>;
+ fsl,playback-dma = <&dma00>;
+ fsl,capture-dma = <&dma01>;
};
ssi@16100 {
@@ -233,17 +235,17 @@
reg = <0x21300 0x4>; /* DMA general status register */
ranges = <0x0 0x21100 0x200>;
- dma-channel@0 {
+ dma00: dma-channel@0 {
compatible = "fsl,mpc8610-dma-channel",
- "fsl,eloplus-dma-channel";
+ "fsl,ssi-dma-channel";
cell-index = <0>;
reg = <0x0 0x80>;
interrupt-parent = <&mpic>;
interrupts = <20 2>;
};
- dma-channel@1 {
+ dma01: dma-channel@1 {
compatible = "fsl,mpc8610-dma-channel",
- "fsl,eloplus-dma-channel";
+ "fsl,ssi-dma-channel";
cell-index = <1>;
reg = <0x80 0x80>;
interrupt-parent = <&mpic>;
diff --git a/arch/powerpc/boot/dts/sbc8349.dts b/arch/powerpc/boot/dts/sbc8349.dts
index 45f789b..0f941f3 100644
--- a/arch/powerpc/boot/dts/sbc8349.dts
+++ b/arch/powerpc/boot/dts/sbc8349.dts
@@ -107,24 +107,28 @@
dma-channel@0 {
compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
reg = <0 0x80>;
+ cell-index = <0>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
dma-channel@80 {
compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
reg = <0x80 0x80>;
+ cell-index = <1>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
dma-channel@100 {
compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
reg = <0x100 0x80>;
+ cell-index = <2>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
dma-channel@180 {
compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
reg = <0x180 0x28>;
+ cell-index = <3>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
@@ -268,7 +272,8 @@
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <0xe0008500 0x100>;
+ reg = <0xe0008500 0x100 /* internal registers */
+ 0xe0008300 0x8>; /* config space access registers */
compatible = "fsl,mpc8349-pci";
device_type = "pci";
};
diff --git a/arch/powerpc/boot/dts/sequoia.dts b/arch/powerpc/boot/dts/sequoia.dts
index 72d15f0..3b295e8 100644
--- a/arch/powerpc/boot/dts/sequoia.dts
+++ b/arch/powerpc/boot/dts/sequoia.dts
@@ -246,13 +246,22 @@
};
IIC0: i2c@ef600700 {
+ #address-cells = <1>;
+ #size-cells = <0>;
compatible = "ibm,iic-440epx", "ibm,iic";
reg = <0xef600700 0x00000014>;
interrupt-parent = <&UIC0>;
interrupts = <0x2 0x4>;
+
+ hwmon@48 {
+ compatible = "adi,ad7414";
+ reg = <0x48>;
+ };
};
IIC1: i2c@ef600800 {
+ #address-cells = <1>;
+ #size-cells = <0>;
compatible = "ibm,iic-440epx", "ibm,iic";
reg = <0xef600800 0x00000014>;
interrupt-parent = <&UIC0>;
diff --git a/arch/powerpc/boot/dts/yosemite.dts b/arch/powerpc/boot/dts/yosemite.dts
index e39422a..1fa3cb4 100644
--- a/arch/powerpc/boot/dts/yosemite.dts
+++ b/arch/powerpc/boot/dts/yosemite.dts
@@ -15,7 +15,7 @@
#address-cells = <2>;
#size-cells = <1>;
model = "amcc,yosemite";
- compatible = "amcc,yosemite","amcc,bamboo";
+ compatible = "amcc,yosemite";
dcr-parent = <&{/cpus/cpu@0}>;
aliases {
diff --git a/arch/powerpc/boot/elf_util.c b/arch/powerpc/boot/elf_util.c
index 7454aa4..1567a0c 100644
--- a/arch/powerpc/boot/elf_util.c
+++ b/arch/powerpc/boot/elf_util.c
@@ -27,7 +27,8 @@
elf64->e_ident[EI_MAG3] == ELFMAG3 &&
elf64->e_ident[EI_CLASS] == ELFCLASS64 &&
elf64->e_ident[EI_DATA] == ELFDATA2MSB &&
- elf64->e_type == ET_EXEC &&
+ (elf64->e_type == ET_EXEC ||
+ elf64->e_type == ET_DYN) &&
elf64->e_machine == EM_PPC64))
return 0;
@@ -58,7 +59,8 @@
elf32->e_ident[EI_MAG3] == ELFMAG3 &&
elf32->e_ident[EI_CLASS] == ELFCLASS32 &&
elf32->e_ident[EI_DATA] == ELFDATA2MSB &&
- elf32->e_type == ET_EXEC &&
+ (elf32->e_type == ET_EXEC ||
+ elf32->e_type == ET_DYN) &&
elf32->e_machine == EM_PPC))
return 0;
diff --git a/arch/powerpc/boot/libfdt/Makefile.libfdt b/arch/powerpc/boot/libfdt/Makefile.libfdt
index 82f9c6a..6c42acf 100644
--- a/arch/powerpc/boot/libfdt/Makefile.libfdt
+++ b/arch/powerpc/boot/libfdt/Makefile.libfdt
@@ -3,12 +3,6 @@
# This is not a complete Makefile of itself. Instead, it is designed to
# be easily embeddable into other systems of Makefiles.
#
-LIBFDT_SRCS = fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c
LIBFDT_INCLUDES = fdt.h libfdt.h
-LIBFDT_EXTRA = libfdt_internal.h
-LIBFDT_LIB = libfdt/libfdt.a
-
+LIBFDT_SRCS = fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c
LIBFDT_OBJS = $(LIBFDT_SRCS:%.c=%.o)
-
-$(LIBFDT_objdir)/$(LIBFDT_LIB): $(addprefix $(LIBFDT_objdir)/,$(LIBFDT_OBJS))
-
diff --git a/arch/powerpc/boot/libfdt/fdt.c b/arch/powerpc/boot/libfdt/fdt.c
index 586a361..2acaec5 100644
--- a/arch/powerpc/boot/libfdt/fdt.c
+++ b/arch/powerpc/boot/libfdt/fdt.c
@@ -63,7 +63,7 @@
return -FDT_ERR_BADVERSION;
if (fdt_last_comp_version(fdt) > FDT_LAST_SUPPORTED_VERSION)
return -FDT_ERR_BADVERSION;
- } else if (fdt_magic(fdt) == SW_MAGIC) {
+ } else if (fdt_magic(fdt) == FDT_SW_MAGIC) {
/* Unfinished sequential-write blob */
if (fdt_size_dt_struct(fdt) == 0)
return -FDT_ERR_BADSTATE;
@@ -76,7 +76,7 @@
const void *fdt_offset_ptr(const void *fdt, int offset, int len)
{
- const void *p;
+ const char *p;
if (fdt_version(fdt) >= 0x11)
if (((offset + len) < offset)
@@ -124,11 +124,59 @@
}
if (nextoffset)
- *nextoffset = ALIGN(offset, FDT_TAGSIZE);
+ *nextoffset = FDT_TAGALIGN(offset);
return tag;
}
+int _fdt_check_node_offset(const void *fdt, int offset)
+{
+ if ((offset < 0) || (offset % FDT_TAGSIZE)
+ || (fdt_next_tag(fdt, offset, &offset) != FDT_BEGIN_NODE))
+ return -FDT_ERR_BADOFFSET;
+
+ return offset;
+}
+
+int fdt_next_node(const void *fdt, int offset, int *depth)
+{
+ int nextoffset = 0;
+ uint32_t tag;
+
+ if (offset >= 0)
+ if ((nextoffset = _fdt_check_node_offset(fdt, offset)) < 0)
+ return nextoffset;
+
+ do {
+ offset = nextoffset;
+ tag = fdt_next_tag(fdt, offset, &nextoffset);
+
+ switch (tag) {
+ case FDT_PROP:
+ case FDT_NOP:
+ break;
+
+ case FDT_BEGIN_NODE:
+ if (depth)
+ (*depth)++;
+ break;
+
+ case FDT_END_NODE:
+ if (depth)
+ (*depth)--;
+ break;
+
+ case FDT_END:
+ return -FDT_ERR_NOTFOUND;
+
+ default:
+ return -FDT_ERR_BADSTRUCTURE;
+ }
+ } while (tag != FDT_BEGIN_NODE);
+
+ return offset;
+}
+
const char *_fdt_find_string(const char *strtab, int tabsize, const char *s)
{
int len = strlen(s) + 1;
@@ -136,17 +184,14 @@
const char *p;
for (p = strtab; p <= last; p++)
- if (memeq(p, s, len))
+ if (memcmp(p, s, len) == 0)
return p;
return NULL;
}
int fdt_move(const void *fdt, void *buf, int bufsize)
{
- int err = fdt_check_header(fdt);
-
- if (err)
- return err;
+ FDT_CHECK_HEADER(fdt);
if (fdt_totalsize(fdt) > bufsize)
return -FDT_ERR_NOSPACE;
diff --git a/arch/powerpc/boot/libfdt/fdt_ro.c b/arch/powerpc/boot/libfdt/fdt_ro.c
index 12a37d5..129b532b 100644
--- a/arch/powerpc/boot/libfdt/fdt_ro.c
+++ b/arch/powerpc/boot/libfdt/fdt_ro.c
@@ -55,17 +55,10 @@
#include "libfdt_internal.h"
-#define CHECK_HEADER(fdt) \
- { \
- int err; \
- if ((err = fdt_check_header(fdt)) != 0) \
- return err; \
- }
-
-static int nodename_eq(const void *fdt, int offset,
- const char *s, int len)
+static int _fdt_nodename_eq(const void *fdt, int offset,
+ const char *s, int len)
{
- const char *p = fdt_offset_ptr(fdt, offset, len+1);
+ const char *p = fdt_offset_ptr(fdt, offset + FDT_TAGSIZE, len+1);
if (! p)
/* short match */
@@ -84,12 +77,12 @@
const char *fdt_string(const void *fdt, int stroffset)
{
- return (char *)fdt + fdt_off_dt_strings(fdt) + stroffset;
+ return (const char *)fdt + fdt_off_dt_strings(fdt) + stroffset;
}
int fdt_get_mem_rsv(const void *fdt, int n, uint64_t *address, uint64_t *size)
{
- CHECK_HEADER(fdt);
+ FDT_CHECK_HEADER(fdt);
*address = fdt64_to_cpu(_fdt_mem_rsv(fdt, n)->address);
*size = fdt64_to_cpu(_fdt_mem_rsv(fdt, n)->size);
return 0;
@@ -104,50 +97,24 @@
return i;
}
-int fdt_subnode_offset_namelen(const void *fdt, int parentoffset,
+int fdt_subnode_offset_namelen(const void *fdt, int offset,
const char *name, int namelen)
{
- int level = 0;
- uint32_t tag;
- int offset, nextoffset;
+ int depth;
- CHECK_HEADER(fdt);
+ FDT_CHECK_HEADER(fdt);
- tag = fdt_next_tag(fdt, parentoffset, &nextoffset);
- if (tag != FDT_BEGIN_NODE)
- return -FDT_ERR_BADOFFSET;
+ for (depth = 0;
+ offset >= 0;
+ offset = fdt_next_node(fdt, offset, &depth)) {
+ if (depth < 0)
+ return -FDT_ERR_NOTFOUND;
+ else if ((depth == 1)
+ && _fdt_nodename_eq(fdt, offset, name, namelen))
+ return offset;
+ }
- do {
- offset = nextoffset;
- tag = fdt_next_tag(fdt, offset, &nextoffset);
-
- switch (tag) {
- case FDT_END:
- return -FDT_ERR_TRUNCATED;
-
- case FDT_BEGIN_NODE:
- level++;
- if (level != 1)
- continue;
- if (nodename_eq(fdt, offset+FDT_TAGSIZE, name, namelen))
- /* Found it! */
- return offset;
- break;
-
- case FDT_END_NODE:
- level--;
- break;
-
- case FDT_PROP:
- case FDT_NOP:
- break;
-
- default:
- return -FDT_ERR_BADSTRUCTURE;
- }
- } while (level >= 0);
-
- return -FDT_ERR_NOTFOUND;
+ return offset; /* error */
}
int fdt_subnode_offset(const void *fdt, int parentoffset,
@@ -162,7 +129,7 @@
const char *p = path;
int offset = 0;
- CHECK_HEADER(fdt);
+ FDT_CHECK_HEADER(fdt);
if (*path != '/')
return -FDT_ERR_BADPATH;
@@ -190,16 +157,12 @@
const char *fdt_get_name(const void *fdt, int nodeoffset, int *len)
{
- const struct fdt_node_header *nh;
+ const struct fdt_node_header *nh = _fdt_offset_ptr(fdt, nodeoffset);
int err;
- if ((err = fdt_check_header(fdt)) != 0)
- goto fail;
-
- err = -FDT_ERR_BADOFFSET;
- nh = fdt_offset_ptr(fdt, nodeoffset, sizeof(*nh));
- if (!nh || (fdt32_to_cpu(nh->tag) != FDT_BEGIN_NODE))
- goto fail;
+ if (((err = fdt_check_header(fdt)) != 0)
+ || ((err = _fdt_check_node_offset(fdt, nodeoffset)) < 0))
+ goto fail;
if (len)
*len = strlen(nh->name);
@@ -222,17 +185,11 @@
int offset, nextoffset;
int err;
- if ((err = fdt_check_header(fdt)) != 0)
- goto fail;
+ if (((err = fdt_check_header(fdt)) != 0)
+ || ((err = _fdt_check_node_offset(fdt, nodeoffset)) < 0))
+ goto fail;
- err = -FDT_ERR_BADOFFSET;
- if (nodeoffset % FDT_TAGSIZE)
- goto fail;
-
- tag = fdt_next_tag(fdt, nodeoffset, &nextoffset);
- if (tag != FDT_BEGIN_NODE)
- goto fail;
-
+ nextoffset = err;
do {
offset = nextoffset;
@@ -253,7 +210,7 @@
if (! prop)
goto fail;
namestroff = fdt32_to_cpu(prop->nameoff);
- if (streq(fdt_string(fdt, namestroff), name)) {
+ if (strcmp(fdt_string(fdt, namestroff), name) == 0) {
/* Found it! */
int len = fdt32_to_cpu(prop->len);
prop = fdt_offset_ptr(fdt, offset,
@@ -307,115 +264,91 @@
int fdt_get_path(const void *fdt, int nodeoffset, char *buf, int buflen)
{
- uint32_t tag;
- int p = 0, overflow = 0;
- int offset, nextoffset, namelen;
+ int pdepth = 0, p = 0;
+ int offset, depth, namelen;
const char *name;
- CHECK_HEADER(fdt);
-
- tag = fdt_next_tag(fdt, 0, &nextoffset);
- if (tag != FDT_BEGIN_NODE)
- return -FDT_ERR_BADSTRUCTURE;
+ FDT_CHECK_HEADER(fdt);
if (buflen < 2)
return -FDT_ERR_NOSPACE;
- buf[0] = '/';
- p = 1;
- while (nextoffset <= nodeoffset) {
- offset = nextoffset;
- tag = fdt_next_tag(fdt, offset, &nextoffset);
- switch (tag) {
- case FDT_END:
- return -FDT_ERR_BADOFFSET;
+ for (offset = 0, depth = 0;
+ (offset >= 0) && (offset <= nodeoffset);
+ offset = fdt_next_node(fdt, offset, &depth)) {
+ if (pdepth < depth)
+ continue; /* overflowed buffer */
- case FDT_BEGIN_NODE:
- name = fdt_get_name(fdt, offset, &namelen);
- if (!name)
- return namelen;
- if (overflow || ((p + namelen + 1) > buflen)) {
- overflow++;
- break;
- }
+ while (pdepth > depth) {
+ do {
+ p--;
+ } while (buf[p-1] != '/');
+ pdepth--;
+ }
+
+ name = fdt_get_name(fdt, offset, &namelen);
+ if (!name)
+ return namelen;
+ if ((p + namelen + 1) <= buflen) {
memcpy(buf + p, name, namelen);
p += namelen;
buf[p++] = '/';
- break;
+ pdepth++;
+ }
- case FDT_END_NODE:
- if (overflow) {
- overflow--;
- break;
- }
- do {
+ if (offset == nodeoffset) {
+ if (pdepth < (depth + 1))
+ return -FDT_ERR_NOSPACE;
+
+ if (p > 1) /* special case so that root path is "/", not "" */
p--;
- } while (buf[p-1] != '/');
- break;
-
- case FDT_PROP:
- case FDT_NOP:
- break;
-
- default:
- return -FDT_ERR_BADSTRUCTURE;
+ buf[p] = '\0';
+ return p;
}
}
- if (overflow)
- return -FDT_ERR_NOSPACE;
+ if ((offset == -FDT_ERR_NOTFOUND) || (offset >= 0))
+ return -FDT_ERR_BADOFFSET;
+ else if (offset == -FDT_ERR_BADOFFSET)
+ return -FDT_ERR_BADSTRUCTURE;
- if (p > 1) /* special case so that root path is "/", not "" */
- p--;
- buf[p] = '\0';
- return p;
+ return offset; /* error from fdt_next_node() */
}
int fdt_supernode_atdepth_offset(const void *fdt, int nodeoffset,
int supernodedepth, int *nodedepth)
{
- int level = -1;
- uint32_t tag;
- int offset, nextoffset = 0;
+ int offset, depth;
int supernodeoffset = -FDT_ERR_INTERNAL;
- CHECK_HEADER(fdt);
+ FDT_CHECK_HEADER(fdt);
if (supernodedepth < 0)
return -FDT_ERR_NOTFOUND;
- do {
- offset = nextoffset;
- tag = fdt_next_tag(fdt, offset, &nextoffset);
- switch (tag) {
- case FDT_END:
- return -FDT_ERR_BADOFFSET;
+ for (offset = 0, depth = 0;
+ (offset >= 0) && (offset <= nodeoffset);
+ offset = fdt_next_node(fdt, offset, &depth)) {
+ if (depth == supernodedepth)
+ supernodeoffset = offset;
- case FDT_BEGIN_NODE:
- level++;
- if (level == supernodedepth)
- supernodeoffset = offset;
- break;
+ if (offset == nodeoffset) {
+ if (nodedepth)
+ *nodedepth = depth;
- case FDT_END_NODE:
- level--;
- break;
-
- case FDT_PROP:
- case FDT_NOP:
- break;
-
- default:
- return -FDT_ERR_BADSTRUCTURE;
+ if (supernodedepth > depth)
+ return -FDT_ERR_NOTFOUND;
+ else
+ return supernodeoffset;
}
- } while (offset < nodeoffset);
+ }
- if (nodedepth)
- *nodedepth = level;
+ if ((offset == -FDT_ERR_NOTFOUND) || (offset >= 0))
+ return -FDT_ERR_BADOFFSET;
+ else if (offset == -FDT_ERR_BADOFFSET)
+ return -FDT_ERR_BADSTRUCTURE;
- if (supernodedepth > level)
- return -FDT_ERR_NOTFOUND;
- return supernodeoffset;
+ return offset; /* error from fdt_next_node() */
}
int fdt_node_depth(const void *fdt, int nodeoffset)
@@ -443,51 +376,27 @@
const char *propname,
const void *propval, int proplen)
{
- uint32_t tag;
- int offset, nextoffset;
+ int offset;
const void *val;
int len;
- CHECK_HEADER(fdt);
-
- if (startoffset >= 0) {
- tag = fdt_next_tag(fdt, startoffset, &nextoffset);
- if (tag != FDT_BEGIN_NODE)
- return -FDT_ERR_BADOFFSET;
- } else {
- nextoffset = 0;
- }
+ FDT_CHECK_HEADER(fdt);
/* FIXME: The algorithm here is pretty horrible: we scan each
* property of a node in fdt_getprop(), then if that didn't
* find what we want, we scan over them again making our way
* to the next node. Still it's the easiest to implement
* approach; performance can come later. */
- do {
- offset = nextoffset;
- tag = fdt_next_tag(fdt, offset, &nextoffset);
+ for (offset = fdt_next_node(fdt, startoffset, NULL);
+ offset >= 0;
+ offset = fdt_next_node(fdt, offset, NULL)) {
+ val = fdt_getprop(fdt, offset, propname, &len);
+ if (val && (len == proplen)
+ && (memcmp(val, propval, len) == 0))
+ return offset;
+ }
- switch (tag) {
- case FDT_BEGIN_NODE:
- val = fdt_getprop(fdt, offset, propname, &len);
- if (val
- && (len == proplen)
- && (memcmp(val, propval, len) == 0))
- return offset;
- break;
-
- case FDT_PROP:
- case FDT_END:
- case FDT_END_NODE:
- case FDT_NOP:
- break;
-
- default:
- return -FDT_ERR_BADSTRUCTURE;
- }
- } while (tag != FDT_END);
-
- return -FDT_ERR_NOTFOUND;
+ return offset; /* error from fdt_next_node() */
}
int fdt_node_offset_by_phandle(const void *fdt, uint32_t phandle)
@@ -499,10 +408,10 @@
&phandle, sizeof(phandle));
}
-int _stringlist_contains(const void *strlist, int listlen, const char *str)
+int _stringlist_contains(const char *strlist, int listlen, const char *str)
{
int len = strlen(str);
- const void *p;
+ const char *p;
while (listlen >= len) {
if (memcmp(str, strlist, len+1) == 0)
@@ -534,50 +443,24 @@
int fdt_node_offset_by_compatible(const void *fdt, int startoffset,
const char *compatible)
{
- uint32_t tag;
- int offset, nextoffset;
- int err;
+ int offset, err;
- CHECK_HEADER(fdt);
-
- if (startoffset >= 0) {
- tag = fdt_next_tag(fdt, startoffset, &nextoffset);
- if (tag != FDT_BEGIN_NODE)
- return -FDT_ERR_BADOFFSET;
- } else {
- nextoffset = 0;
- }
+ FDT_CHECK_HEADER(fdt);
/* FIXME: The algorithm here is pretty horrible: we scan each
* property of a node in fdt_node_check_compatible(), then if
* that didn't find what we want, we scan over them again
* making our way to the next node. Still it's the easiest to
* implement approach; performance can come later. */
- do {
- offset = nextoffset;
- tag = fdt_next_tag(fdt, offset, &nextoffset);
+ for (offset = fdt_next_node(fdt, startoffset, NULL);
+ offset >= 0;
+ offset = fdt_next_node(fdt, offset, NULL)) {
+ err = fdt_node_check_compatible(fdt, offset, compatible);
+ if ((err < 0) && (err != -FDT_ERR_NOTFOUND))
+ return err;
+ else if (err == 0)
+ return offset;
+ }
- switch (tag) {
- case FDT_BEGIN_NODE:
- err = fdt_node_check_compatible(fdt, offset,
- compatible);
- if ((err < 0)
- && (err != -FDT_ERR_NOTFOUND))
- return err;
- else if (err == 0)
- return offset;
- break;
-
- case FDT_PROP:
- case FDT_END:
- case FDT_END_NODE:
- case FDT_NOP:
- break;
-
- default:
- return -FDT_ERR_BADSTRUCTURE;
- }
- } while (tag != FDT_END);
-
- return -FDT_ERR_NOTFOUND;
+ return offset; /* error from fdt_next_node() */
}
diff --git a/arch/powerpc/boot/libfdt/fdt_rw.c b/arch/powerpc/boot/libfdt/fdt_rw.c
index 6673f8e..8e7ec4c 100644
--- a/arch/powerpc/boot/libfdt/fdt_rw.c
+++ b/arch/powerpc/boot/libfdt/fdt_rw.c
@@ -55,10 +55,10 @@
#include "libfdt_internal.h"
-static int _blocks_misordered(const void *fdt,
+static int _fdt_blocks_misordered(const void *fdt,
int mem_rsv_size, int struct_size)
{
- return (fdt_off_mem_rsvmap(fdt) < ALIGN(sizeof(struct fdt_header), 8))
+ return (fdt_off_mem_rsvmap(fdt) < FDT_ALIGN(sizeof(struct fdt_header), 8))
|| (fdt_off_dt_struct(fdt) <
(fdt_off_mem_rsvmap(fdt) + mem_rsv_size))
|| (fdt_off_dt_strings(fdt) <
@@ -67,16 +67,14 @@
(fdt_off_dt_strings(fdt) + fdt_size_dt_strings(fdt)));
}
-static int rw_check_header(void *fdt)
+static int _fdt_rw_check_header(void *fdt)
{
- int err;
+ FDT_CHECK_HEADER(fdt);
- if ((err = fdt_check_header(fdt)))
- return err;
if (fdt_version(fdt) < 17)
return -FDT_ERR_BADVERSION;
- if (_blocks_misordered(fdt, sizeof(struct fdt_reserve_entry),
- fdt_size_dt_struct(fdt)))
+ if (_fdt_blocks_misordered(fdt, sizeof(struct fdt_reserve_entry),
+ fdt_size_dt_struct(fdt)))
return -FDT_ERR_BADLAYOUT;
if (fdt_version(fdt) > 17)
fdt_set_version(fdt, 17);
@@ -84,36 +82,37 @@
return 0;
}
-#define RW_CHECK_HEADER(fdt) \
+#define FDT_RW_CHECK_HEADER(fdt) \
{ \
int err; \
- if ((err = rw_check_header(fdt)) != 0) \
+ if ((err = _fdt_rw_check_header(fdt)) != 0) \
return err; \
}
-static inline int _blob_data_size(void *fdt)
+static inline int _fdt_data_size(void *fdt)
{
return fdt_off_dt_strings(fdt) + fdt_size_dt_strings(fdt);
}
-static int _blob_splice(void *fdt, void *p, int oldlen, int newlen)
+static int _fdt_splice(void *fdt, void *splicepoint, int oldlen, int newlen)
{
- void *end = fdt + _blob_data_size(fdt);
+ char *p = splicepoint;
+ char *end = (char *)fdt + _fdt_data_size(fdt);
if (((p + oldlen) < p) || ((p + oldlen) > end))
return -FDT_ERR_BADOFFSET;
- if ((end - oldlen + newlen) > (fdt + fdt_totalsize(fdt)))
+ if ((end - oldlen + newlen) > ((char *)fdt + fdt_totalsize(fdt)))
return -FDT_ERR_NOSPACE;
memmove(p + newlen, p + oldlen, end - p - oldlen);
return 0;
}
-static int _blob_splice_mem_rsv(void *fdt, struct fdt_reserve_entry *p,
- int oldn, int newn)
+static int _fdt_splice_mem_rsv(void *fdt, struct fdt_reserve_entry *p,
+ int oldn, int newn)
{
int delta = (newn - oldn) * sizeof(*p);
int err;
- err = _blob_splice(fdt, p, oldn * sizeof(*p), newn * sizeof(*p));
+ err = _fdt_splice(fdt, p, oldn * sizeof(*p), newn * sizeof(*p));
if (err)
return err;
fdt_set_off_dt_struct(fdt, fdt_off_dt_struct(fdt) + delta);
@@ -121,13 +120,13 @@
return 0;
}
-static int _blob_splice_struct(void *fdt, void *p,
- int oldlen, int newlen)
+static int _fdt_splice_struct(void *fdt, void *p,
+ int oldlen, int newlen)
{
int delta = newlen - oldlen;
int err;
- if ((err = _blob_splice(fdt, p, oldlen, newlen)))
+ if ((err = _fdt_splice(fdt, p, oldlen, newlen)))
return err;
fdt_set_size_dt_struct(fdt, fdt_size_dt_struct(fdt) + delta);
@@ -135,19 +134,20 @@
return 0;
}
-static int _blob_splice_string(void *fdt, int newlen)
+static int _fdt_splice_string(void *fdt, int newlen)
{
- void *p = fdt + fdt_off_dt_strings(fdt) + fdt_size_dt_strings(fdt);
+ void *p = (char *)fdt
+ + fdt_off_dt_strings(fdt) + fdt_size_dt_strings(fdt);
int err;
- if ((err = _blob_splice(fdt, p, 0, newlen)))
+ if ((err = _fdt_splice(fdt, p, 0, newlen)))
return err;
fdt_set_size_dt_strings(fdt, fdt_size_dt_strings(fdt) + newlen);
return 0;
}
-static int _find_add_string(void *fdt, const char *s)
+static int _fdt_find_add_string(void *fdt, const char *s)
{
char *strtab = (char *)fdt + fdt_off_dt_strings(fdt);
const char *p;
@@ -161,7 +161,7 @@
return (p - strtab);
new = strtab + fdt_size_dt_strings(fdt);
- err = _blob_splice_string(fdt, len);
+ err = _fdt_splice_string(fdt, len);
if (err)
return err;
@@ -174,11 +174,10 @@
struct fdt_reserve_entry *re;
int err;
- if ((err = rw_check_header(fdt)))
- return err;
+ FDT_RW_CHECK_HEADER(fdt);
re = _fdt_mem_rsv_w(fdt, fdt_num_mem_rsv(fdt));
- err = _blob_splice_mem_rsv(fdt, re, 0, 1);
+ err = _fdt_splice_mem_rsv(fdt, re, 0, 1);
if (err)
return err;
@@ -192,19 +191,19 @@
struct fdt_reserve_entry *re = _fdt_mem_rsv_w(fdt, n);
int err;
- if ((err = rw_check_header(fdt)))
- return err;
+ FDT_RW_CHECK_HEADER(fdt);
+
if (n >= fdt_num_mem_rsv(fdt))
return -FDT_ERR_NOTFOUND;
- err = _blob_splice_mem_rsv(fdt, re, 1, 0);
+ err = _fdt_splice_mem_rsv(fdt, re, 1, 0);
if (err)
return err;
return 0;
}
-static int _resize_property(void *fdt, int nodeoffset, const char *name, int len,
- struct fdt_property **prop)
+static int _fdt_resize_property(void *fdt, int nodeoffset, const char *name,
+ int len, struct fdt_property **prop)
{
int oldlen;
int err;
@@ -213,36 +212,33 @@
if (! (*prop))
return oldlen;
- if ((err = _blob_splice_struct(fdt, (*prop)->data,
- ALIGN(oldlen, FDT_TAGSIZE),
- ALIGN(len, FDT_TAGSIZE))))
+ if ((err = _fdt_splice_struct(fdt, (*prop)->data, FDT_TAGALIGN(oldlen),
+ FDT_TAGALIGN(len))))
return err;
(*prop)->len = cpu_to_fdt32(len);
return 0;
}
-static int _add_property(void *fdt, int nodeoffset, const char *name, int len,
- struct fdt_property **prop)
+static int _fdt_add_property(void *fdt, int nodeoffset, const char *name,
+ int len, struct fdt_property **prop)
{
- uint32_t tag;
int proplen;
int nextoffset;
int namestroff;
int err;
- tag = fdt_next_tag(fdt, nodeoffset, &nextoffset);
- if (tag != FDT_BEGIN_NODE)
- return -FDT_ERR_BADOFFSET;
+ if ((nextoffset = _fdt_check_node_offset(fdt, nodeoffset)) < 0)
+ return nextoffset;
- namestroff = _find_add_string(fdt, name);
+ namestroff = _fdt_find_add_string(fdt, name);
if (namestroff < 0)
return namestroff;
*prop = _fdt_offset_ptr_w(fdt, nextoffset);
- proplen = sizeof(**prop) + ALIGN(len, FDT_TAGSIZE);
+ proplen = sizeof(**prop) + FDT_TAGALIGN(len);
- err = _blob_splice_struct(fdt, *prop, 0, proplen);
+ err = _fdt_splice_struct(fdt, *prop, 0, proplen);
if (err)
return err;
@@ -252,18 +248,40 @@
return 0;
}
+int fdt_set_name(void *fdt, int nodeoffset, const char *name)
+{
+ char *namep;
+ int oldlen, newlen;
+ int err;
+
+ FDT_RW_CHECK_HEADER(fdt);
+
+ namep = (char *)(uintptr_t)fdt_get_name(fdt, nodeoffset, &oldlen);
+ if (!namep)
+ return oldlen;
+
+ newlen = strlen(name);
+
+ err = _fdt_splice_struct(fdt, namep, FDT_TAGALIGN(oldlen+1),
+ FDT_TAGALIGN(newlen+1));
+ if (err)
+ return err;
+
+ memcpy(namep, name, newlen+1);
+ return 0;
+}
+
int fdt_setprop(void *fdt, int nodeoffset, const char *name,
const void *val, int len)
{
struct fdt_property *prop;
int err;
- if ((err = rw_check_header(fdt)))
- return err;
+ FDT_RW_CHECK_HEADER(fdt);
- err = _resize_property(fdt, nodeoffset, name, len, &prop);
+ err = _fdt_resize_property(fdt, nodeoffset, name, len, &prop);
if (err == -FDT_ERR_NOTFOUND)
- err = _add_property(fdt, nodeoffset, name, len, &prop);
+ err = _fdt_add_property(fdt, nodeoffset, name, len, &prop);
if (err)
return err;
@@ -276,14 +294,14 @@
struct fdt_property *prop;
int len, proplen;
- RW_CHECK_HEADER(fdt);
+ FDT_RW_CHECK_HEADER(fdt);
prop = fdt_get_property_w(fdt, nodeoffset, name, &len);
if (! prop)
return len;
- proplen = sizeof(*prop) + ALIGN(len, FDT_TAGSIZE);
- return _blob_splice_struct(fdt, prop, proplen, 0);
+ proplen = sizeof(*prop) + FDT_TAGALIGN(len);
+ return _fdt_splice_struct(fdt, prop, proplen, 0);
}
int fdt_add_subnode_namelen(void *fdt, int parentoffset,
@@ -296,7 +314,7 @@
uint32_t tag;
uint32_t *endtag;
- RW_CHECK_HEADER(fdt);
+ FDT_RW_CHECK_HEADER(fdt);
offset = fdt_subnode_offset_namelen(fdt, parentoffset, name, namelen);
if (offset >= 0)
@@ -309,19 +327,19 @@
do {
offset = nextoffset;
tag = fdt_next_tag(fdt, offset, &nextoffset);
- } while (tag == FDT_PROP);
+ } while ((tag == FDT_PROP) || (tag == FDT_NOP));
nh = _fdt_offset_ptr_w(fdt, offset);
- nodelen = sizeof(*nh) + ALIGN(namelen+1, FDT_TAGSIZE) + FDT_TAGSIZE;
+ nodelen = sizeof(*nh) + FDT_TAGALIGN(namelen+1) + FDT_TAGSIZE;
- err = _blob_splice_struct(fdt, nh, 0, nodelen);
+ err = _fdt_splice_struct(fdt, nh, 0, nodelen);
if (err)
return err;
nh->tag = cpu_to_fdt32(FDT_BEGIN_NODE);
- memset(nh->name, 0, ALIGN(namelen+1, FDT_TAGSIZE));
+ memset(nh->name, 0, FDT_TAGALIGN(namelen+1));
memcpy(nh->name, name, namelen);
- endtag = (uint32_t *)((void *)nh + nodelen - FDT_TAGSIZE);
+ endtag = (uint32_t *)((char *)nh + nodelen - FDT_TAGSIZE);
*endtag = cpu_to_fdt32(FDT_END_NODE);
return offset;
@@ -336,36 +354,36 @@
{
int endoffset;
- RW_CHECK_HEADER(fdt);
+ FDT_RW_CHECK_HEADER(fdt);
endoffset = _fdt_node_end_offset(fdt, nodeoffset);
if (endoffset < 0)
return endoffset;
- return _blob_splice_struct(fdt, _fdt_offset_ptr_w(fdt, nodeoffset),
- endoffset - nodeoffset, 0);
+ return _fdt_splice_struct(fdt, _fdt_offset_ptr_w(fdt, nodeoffset),
+ endoffset - nodeoffset, 0);
}
-static void _packblocks(const void *fdt, void *buf,
- int mem_rsv_size, int struct_size)
+static void _fdt_packblocks(const char *old, char *new,
+ int mem_rsv_size, int struct_size)
{
int mem_rsv_off, struct_off, strings_off;
- mem_rsv_off = ALIGN(sizeof(struct fdt_header), 8);
+ mem_rsv_off = FDT_ALIGN(sizeof(struct fdt_header), 8);
struct_off = mem_rsv_off + mem_rsv_size;
strings_off = struct_off + struct_size;
- memmove(buf + mem_rsv_off, fdt + fdt_off_mem_rsvmap(fdt), mem_rsv_size);
- fdt_set_off_mem_rsvmap(buf, mem_rsv_off);
+ memmove(new + mem_rsv_off, old + fdt_off_mem_rsvmap(old), mem_rsv_size);
+ fdt_set_off_mem_rsvmap(new, mem_rsv_off);
- memmove(buf + struct_off, fdt + fdt_off_dt_struct(fdt), struct_size);
- fdt_set_off_dt_struct(buf, struct_off);
- fdt_set_size_dt_struct(buf, struct_size);
+ memmove(new + struct_off, old + fdt_off_dt_struct(old), struct_size);
+ fdt_set_off_dt_struct(new, struct_off);
+ fdt_set_size_dt_struct(new, struct_size);
- memmove(buf + strings_off, fdt + fdt_off_dt_strings(fdt),
- fdt_size_dt_strings(fdt));
- fdt_set_off_dt_strings(buf, strings_off);
- fdt_set_size_dt_strings(buf, fdt_size_dt_strings(fdt));
+ memmove(new + strings_off, old + fdt_off_dt_strings(old),
+ fdt_size_dt_strings(old));
+ fdt_set_off_dt_strings(new, strings_off);
+ fdt_set_size_dt_strings(new, fdt_size_dt_strings(old));
}
int fdt_open_into(const void *fdt, void *buf, int bufsize)
@@ -373,11 +391,11 @@
int err;
int mem_rsv_size, struct_size;
int newsize;
- void *tmp;
+ const char *fdtstart = fdt;
+ const char *fdtend = fdtstart + fdt_totalsize(fdt);
+ char *tmp;
- err = fdt_check_header(fdt);
- if (err)
- return err;
+ FDT_CHECK_HEADER(fdt);
mem_rsv_size = (fdt_num_mem_rsv(fdt)+1)
* sizeof(struct fdt_reserve_entry);
@@ -390,7 +408,7 @@
;
}
- if (!_blocks_misordered(fdt, mem_rsv_size, struct_size)) {
+ if (!_fdt_blocks_misordered(fdt, mem_rsv_size, struct_size)) {
/* no further work necessary */
err = fdt_move(fdt, buf, bufsize);
if (err)
@@ -402,22 +420,23 @@
}
/* Need to reorder */
- newsize = ALIGN(sizeof(struct fdt_header), 8) + mem_rsv_size
+ newsize = FDT_ALIGN(sizeof(struct fdt_header), 8) + mem_rsv_size
+ struct_size + fdt_size_dt_strings(fdt);
if (bufsize < newsize)
return -FDT_ERR_NOSPACE;
- if (((buf + newsize) <= fdt)
- || (buf >= (fdt + fdt_totalsize(fdt)))) {
- tmp = buf;
- } else {
- tmp = (void *)fdt + fdt_totalsize(fdt);
- if ((tmp + newsize) > (buf + bufsize))
+ /* First attempt to build converted tree at beginning of buffer */
+ tmp = buf;
+ /* But if that overlaps with the old tree... */
+ if (((tmp + newsize) > fdtstart) && (tmp < fdtend)) {
+ /* Try right after the old tree instead */
+ tmp = (char *)(uintptr_t)fdtend;
+ if ((tmp + newsize) > ((char *)buf + bufsize))
return -FDT_ERR_NOSPACE;
}
- _packblocks(fdt, tmp, mem_rsv_size, struct_size);
+ _fdt_packblocks(fdt, tmp, mem_rsv_size, struct_size);
memmove(buf, tmp, newsize);
fdt_set_magic(buf, FDT_MAGIC);
@@ -432,16 +451,13 @@
int fdt_pack(void *fdt)
{
int mem_rsv_size;
- int err;
- err = rw_check_header(fdt);
- if (err)
- return err;
+ FDT_RW_CHECK_HEADER(fdt);
mem_rsv_size = (fdt_num_mem_rsv(fdt)+1)
* sizeof(struct fdt_reserve_entry);
- _packblocks(fdt, fdt, mem_rsv_size, fdt_size_dt_struct(fdt));
- fdt_set_totalsize(fdt, _blob_data_size(fdt));
+ _fdt_packblocks(fdt, fdt, mem_rsv_size, fdt_size_dt_struct(fdt));
+ fdt_set_totalsize(fdt, _fdt_data_size(fdt));
return 0;
}
diff --git a/arch/powerpc/boot/libfdt/fdt_strerror.c b/arch/powerpc/boot/libfdt/fdt_strerror.c
index f9d32ef..e6c3cee 100644
--- a/arch/powerpc/boot/libfdt/fdt_strerror.c
+++ b/arch/powerpc/boot/libfdt/fdt_strerror.c
@@ -55,29 +55,29 @@
#include "libfdt_internal.h"
-struct errtabent {
+struct fdt_errtabent {
const char *str;
};
-#define ERRTABENT(val) \
+#define FDT_ERRTABENT(val) \
[(val)] = { .str = #val, }
-static struct errtabent errtable[] = {
- ERRTABENT(FDT_ERR_NOTFOUND),
- ERRTABENT(FDT_ERR_EXISTS),
- ERRTABENT(FDT_ERR_NOSPACE),
+static struct fdt_errtabent fdt_errtable[] = {
+ FDT_ERRTABENT(FDT_ERR_NOTFOUND),
+ FDT_ERRTABENT(FDT_ERR_EXISTS),
+ FDT_ERRTABENT(FDT_ERR_NOSPACE),
- ERRTABENT(FDT_ERR_BADOFFSET),
- ERRTABENT(FDT_ERR_BADPATH),
- ERRTABENT(FDT_ERR_BADSTATE),
+ FDT_ERRTABENT(FDT_ERR_BADOFFSET),
+ FDT_ERRTABENT(FDT_ERR_BADPATH),
+ FDT_ERRTABENT(FDT_ERR_BADSTATE),
- ERRTABENT(FDT_ERR_TRUNCATED),
- ERRTABENT(FDT_ERR_BADMAGIC),
- ERRTABENT(FDT_ERR_BADVERSION),
- ERRTABENT(FDT_ERR_BADSTRUCTURE),
- ERRTABENT(FDT_ERR_BADLAYOUT),
+ FDT_ERRTABENT(FDT_ERR_TRUNCATED),
+ FDT_ERRTABENT(FDT_ERR_BADMAGIC),
+ FDT_ERRTABENT(FDT_ERR_BADVERSION),
+ FDT_ERRTABENT(FDT_ERR_BADSTRUCTURE),
+ FDT_ERRTABENT(FDT_ERR_BADLAYOUT),
};
-#define ERRTABSIZE (sizeof(errtable) / sizeof(errtable[0]))
+#define FDT_ERRTABSIZE (sizeof(fdt_errtable) / sizeof(fdt_errtable[0]))
const char *fdt_strerror(int errval)
{
@@ -85,8 +85,8 @@
return "<valid offset/length>";
else if (errval == 0)
return "<no error>";
- else if (errval > -ERRTABSIZE) {
- const char *s = errtable[-errval].str;
+ else if (errval > -FDT_ERRTABSIZE) {
+ const char *s = fdt_errtable[-errval].str;
if (s)
return s;
diff --git a/arch/powerpc/boot/libfdt/fdt_sw.c b/arch/powerpc/boot/libfdt/fdt_sw.c
index dda2de3..698329e 100644
--- a/arch/powerpc/boot/libfdt/fdt_sw.c
+++ b/arch/powerpc/boot/libfdt/fdt_sw.c
@@ -55,14 +55,22 @@
#include "libfdt_internal.h"
-static int check_header_sw(void *fdt)
+static int _fdt_sw_check_header(void *fdt)
{
- if (fdt_magic(fdt) != SW_MAGIC)
+ if (fdt_magic(fdt) != FDT_SW_MAGIC)
return -FDT_ERR_BADMAGIC;
+ /* FIXME: should check more details about the header state */
return 0;
}
-static void *grab_space(void *fdt, int len)
+#define FDT_SW_CHECK_HEADER(fdt) \
+ { \
+ int err; \
+ if ((err = _fdt_sw_check_header(fdt)) != 0) \
+ return err; \
+ }
+
+static void *_fdt_grab_space(void *fdt, int len)
{
int offset = fdt_size_dt_struct(fdt);
int spaceleft;
@@ -86,13 +94,13 @@
memset(buf, 0, bufsize);
- fdt_set_magic(fdt, SW_MAGIC);
+ fdt_set_magic(fdt, FDT_SW_MAGIC);
fdt_set_version(fdt, FDT_LAST_SUPPORTED_VERSION);
fdt_set_last_comp_version(fdt, FDT_FIRST_SUPPORTED_VERSION);
fdt_set_totalsize(fdt, bufsize);
- fdt_set_off_mem_rsvmap(fdt, ALIGN(sizeof(struct fdt_header),
- sizeof(struct fdt_reserve_entry)));
+ fdt_set_off_mem_rsvmap(fdt, FDT_ALIGN(sizeof(struct fdt_header),
+ sizeof(struct fdt_reserve_entry)));
fdt_set_off_dt_struct(fdt, fdt_off_mem_rsvmap(fdt));
fdt_set_off_dt_strings(fdt, bufsize);
@@ -102,11 +110,10 @@
int fdt_add_reservemap_entry(void *fdt, uint64_t addr, uint64_t size)
{
struct fdt_reserve_entry *re;
- int err = check_header_sw(fdt);
int offset;
- if (err)
- return err;
+ FDT_SW_CHECK_HEADER(fdt);
+
if (fdt_size_dt_struct(fdt))
return -FDT_ERR_BADSTATE;
@@ -114,7 +121,7 @@
if ((offset + sizeof(*re)) > fdt_totalsize(fdt))
return -FDT_ERR_NOSPACE;
- re = (struct fdt_reserve_entry *)(fdt + offset);
+ re = (struct fdt_reserve_entry *)((char *)fdt + offset);
re->address = cpu_to_fdt64(addr);
re->size = cpu_to_fdt64(size);
@@ -131,13 +138,11 @@
int fdt_begin_node(void *fdt, const char *name)
{
struct fdt_node_header *nh;
- int err = check_header_sw(fdt);
int namelen = strlen(name) + 1;
- if (err)
- return err;
+ FDT_SW_CHECK_HEADER(fdt);
- nh = grab_space(fdt, sizeof(*nh) + ALIGN(namelen, FDT_TAGSIZE));
+ nh = _fdt_grab_space(fdt, sizeof(*nh) + FDT_TAGALIGN(namelen));
if (! nh)
return -FDT_ERR_NOSPACE;
@@ -149,12 +154,10 @@
int fdt_end_node(void *fdt)
{
uint32_t *en;
- int err = check_header_sw(fdt);
- if (err)
- return err;
+ FDT_SW_CHECK_HEADER(fdt);
- en = grab_space(fdt, FDT_TAGSIZE);
+ en = _fdt_grab_space(fdt, FDT_TAGSIZE);
if (! en)
return -FDT_ERR_NOSPACE;
@@ -162,7 +165,7 @@
return 0;
}
-static int find_add_string(void *fdt, const char *s)
+static int _fdt_find_add_string(void *fdt, const char *s)
{
char *strtab = (char *)fdt + fdt_totalsize(fdt);
const char *p;
@@ -188,17 +191,15 @@
int fdt_property(void *fdt, const char *name, const void *val, int len)
{
struct fdt_property *prop;
- int err = check_header_sw(fdt);
int nameoff;
- if (err)
- return err;
+ FDT_SW_CHECK_HEADER(fdt);
- nameoff = find_add_string(fdt, name);
+ nameoff = _fdt_find_add_string(fdt, name);
if (nameoff == 0)
return -FDT_ERR_NOSPACE;
- prop = grab_space(fdt, sizeof(*prop) + ALIGN(len, FDT_TAGSIZE));
+ prop = _fdt_grab_space(fdt, sizeof(*prop) + FDT_TAGALIGN(len));
if (! prop)
return -FDT_ERR_NOSPACE;
@@ -211,18 +212,16 @@
int fdt_finish(void *fdt)
{
- int err = check_header_sw(fdt);
char *p = (char *)fdt;
uint32_t *end;
int oldstroffset, newstroffset;
uint32_t tag;
int offset, nextoffset;
- if (err)
- return err;
+ FDT_SW_CHECK_HEADER(fdt);
/* Add terminator */
- end = grab_space(fdt, sizeof(*end));
+ end = _fdt_grab_space(fdt, sizeof(*end));
if (! end)
return -FDT_ERR_NOSPACE;
*end = cpu_to_fdt32(FDT_END);
diff --git a/arch/powerpc/boot/libfdt/fdt_wip.c b/arch/powerpc/boot/libfdt/fdt_wip.c
index 88e24b8..a4652c6 100644
--- a/arch/powerpc/boot/libfdt/fdt_wip.c
+++ b/arch/powerpc/boot/libfdt/fdt_wip.c
@@ -72,11 +72,11 @@
return 0;
}
-static void nop_region(void *start, int len)
+static void _fdt_nop_region(void *start, int len)
{
uint32_t *p;
- for (p = start; (void *)p < (start + len); p++)
+ for (p = start; (char *)p < ((char *)start + len); p++)
*p = cpu_to_fdt32(FDT_NOP);
}
@@ -89,7 +89,7 @@
if (! prop)
return len;
- nop_region(prop, len + sizeof(*prop));
+ _fdt_nop_region(prop, len + sizeof(*prop));
return 0;
}
@@ -139,6 +139,7 @@
if (endoffset < 0)
return endoffset;
- nop_region(fdt_offset_ptr_w(fdt, nodeoffset, 0), endoffset - nodeoffset);
+ _fdt_nop_region(fdt_offset_ptr_w(fdt, nodeoffset, 0),
+ endoffset - nodeoffset);
return 0;
}
diff --git a/arch/powerpc/boot/libfdt/libfdt.h b/arch/powerpc/boot/libfdt/libfdt.h
index 6b2fb92..ce80e4f 100644
--- a/arch/powerpc/boot/libfdt/libfdt.h
+++ b/arch/powerpc/boot/libfdt/libfdt.h
@@ -125,12 +125,18 @@
const void *fdt_offset_ptr(const void *fdt, int offset, int checklen);
static inline void *fdt_offset_ptr_w(void *fdt, int offset, int checklen)
{
- return (void *)fdt_offset_ptr(fdt, offset, checklen);
+ return (void *)(uintptr_t)fdt_offset_ptr(fdt, offset, checklen);
}
uint32_t fdt_next_tag(const void *fdt, int offset, int *nextoffset);
/**********************************************************************/
+/* Traversal functions */
+/**********************************************************************/
+
+int fdt_next_node(const void *fdt, int offset, int *depth);
+
+/**********************************************************************/
/* General functions */
/**********************************************************************/
@@ -207,7 +213,7 @@
/**********************************************************************/
/**
- * fdt_string - retreive a string from the strings block of a device tree
+ * fdt_string - retrieve a string from the strings block of a device tree
* @fdt: pointer to the device tree blob
* @stroffset: offset of the string within the strings block (native endian)
*
@@ -221,7 +227,7 @@
const char *fdt_string(const void *fdt, int stroffset);
/**
- * fdt_num_mem_rsv - retreive the number of memory reserve map entries
+ * fdt_num_mem_rsv - retrieve the number of memory reserve map entries
* @fdt: pointer to the device tree blob
*
* Returns the number of entries in the device tree blob's memory
@@ -234,7 +240,7 @@
int fdt_num_mem_rsv(const void *fdt);
/**
- * fdt_get_mem_rsv - retreive one memory reserve map entry
+ * fdt_get_mem_rsv - retrieve one memory reserve map entry
* @fdt: pointer to the device tree blob
* @address, @size: pointers to 64-bit variables
*
@@ -314,7 +320,7 @@
int fdt_path_offset(const void *fdt, const char *path);
/**
- * fdt_get_name - retreive the name of a given node
+ * fdt_get_name - retrieve the name of a given node
* @fdt: pointer to the device tree blob
* @nodeoffset: structure block offset of the starting node
* @lenp: pointer to an integer variable (will be overwritten) or NULL
@@ -346,7 +352,7 @@
* fdt_get_property() retrieves a pointer to the fdt_property
* structure within the device tree blob corresponding to the property
* named 'name' of the node at offset nodeoffset. If lenp is
- * non-NULL, the length of the property value also returned, in the
+ * non-NULL, the length of the property value is also returned, in the
* integer pointed to by lenp.
*
* returns:
@@ -369,8 +375,8 @@
const char *name,
int *lenp)
{
- return (struct fdt_property *)fdt_get_property(fdt, nodeoffset,
- name, lenp);
+ return (struct fdt_property *)(uintptr_t)
+ fdt_get_property(fdt, nodeoffset, name, lenp);
}
/**
@@ -383,7 +389,7 @@
* fdt_getprop() retrieves a pointer to the value of the property
* named 'name' of the node at offset nodeoffset (this will be a
* pointer to within the device blob itself, not a copy of the value).
- * If lenp is non-NULL, the length of the property value also
+ * If lenp is non-NULL, the length of the property value is also
* returned, in the integer pointed to by lenp.
*
* returns:
@@ -405,11 +411,11 @@
static inline void *fdt_getprop_w(void *fdt, int nodeoffset,
const char *name, int *lenp)
{
- return (void *)fdt_getprop(fdt, nodeoffset, name, lenp);
+ return (void *)(uintptr_t)fdt_getprop(fdt, nodeoffset, name, lenp);
}
/**
- * fdt_get_phandle - retreive the phandle of a given node
+ * fdt_get_phandle - retrieve the phandle of a given node
* @fdt: pointer to the device tree blob
* @nodeoffset: structure block offset of the node
*
@@ -417,7 +423,7 @@
* structure block offset nodeoffset.
*
* returns:
- * the phandle of the node at nodeoffset, on succes (!= 0, != -1)
+ * the phandle of the node at nodeoffset, on success (!= 0, != -1)
* 0, if the node has no phandle, or another error occurs
*/
uint32_t fdt_get_phandle(const void *fdt, int nodeoffset);
@@ -516,7 +522,7 @@
* structure from the start to nodeoffset, *twice*.
*
* returns:
- * stucture block offset of the parent of the node at nodeoffset
+ * structure block offset of the parent of the node at nodeoffset
* (>=0), on success
* -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
* -FDT_ERR_BADMAGIC,
@@ -573,7 +579,7 @@
* @fdt: pointer to the device tree blob
* @phandle: phandle value
*
- * fdt_node_offset_by_prop_value() returns the offset of the node
+ * fdt_node_offset_by_phandle() returns the offset of the node
* which has the given phandle value. If there is more than one node
* in the tree with the given phandle (an invalid tree), results are
* undefined.
@@ -655,8 +661,65 @@
/* Write-in-place functions */
/**********************************************************************/
+/**
+ * fdt_setprop_inplace - change a property's value, but not its size
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to change
+ * @name: name of the property to change
+ * @val: pointer to data to replace the property value with
+ * @len: length of the property value
+ *
+ * fdt_setprop_inplace() replaces the value of a given property with
+ * the data in val, of length len. This function cannot change the
+ * size of a property, and so will only work if len is equal to the
+ * current length of the property.
+ *
+ * This function will alter only the bytes in the blob which contain
+ * the given property value, and will not alter or move any other part
+ * of the tree.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_NOSPACE, if len is not equal to the property's current length
+ * -FDT_ERR_NOTFOUND, node does not have the named property
+ * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
int fdt_setprop_inplace(void *fdt, int nodeoffset, const char *name,
const void *val, int len);
+
+/**
+ * fdt_setprop_inplace_cell - change the value of a single-cell property
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to change
+ * @name: name of the property to change
+ * @val: cell (32-bit integer) value to replace the property with
+ *
+ * fdt_setprop_inplace_cell() replaces the value of a given property
+ * with the 32-bit integer cell value in val, converting val to
+ * big-endian if necessary. This function cannot change the size of a
+ * property, and so will only work if the property already exists and
+ * has length 4.
+ *
+ * This function will alter only the bytes in the blob which contain
+ * the given property value, and will not alter or move any other part
+ * of the tree.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_NOSPACE, if the property's length is not equal to 4
+ * -FDT_ERR_NOTFOUND, node does not have the named property
+ * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
static inline int fdt_setprop_inplace_cell(void *fdt, int nodeoffset,
const char *name, uint32_t val)
{
@@ -664,7 +727,54 @@
return fdt_setprop_inplace(fdt, nodeoffset, name, &val, sizeof(val));
}
+/**
+ * fdt_nop_property - replace a property with nop tags
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to nop
+ * @name: name of the property to nop
+ *
+ * fdt_nop_property() will replace a given property's representation
+ * in the blob with FDT_NOP tags, effectively removing it from the
+ * tree.
+ *
+ * This function will alter only the bytes in the blob which contain
+ * the property, and will not alter or move any other part of the
+ * tree.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_NOTFOUND, node does not have the named property
+ * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
int fdt_nop_property(void *fdt, int nodeoffset, const char *name);
+
+/**
+ * fdt_nop_node - replace a node (subtree) with nop tags
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node to nop
+ *
+ * fdt_nop_node() will replace a given node's representation in the
+ * blob, including all its subnodes, if any, with FDT_NOP tags,
+ * effectively removing it from the tree.
+ *
+ * This function will alter only the bytes in the blob which contain
+ * the node and its properties and subnodes, and will not alter or
+ * move any other part of the tree.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
int fdt_nop_node(void *fdt, int nodeoffset);
/**********************************************************************/
@@ -693,23 +803,268 @@
int fdt_open_into(const void *fdt, void *buf, int bufsize);
int fdt_pack(void *fdt);
+/**
+ * fdt_add_mem_rsv - add one memory reserve map entry
+ * @fdt: pointer to the device tree blob
+ * @address, @size: 64-bit values (native endian)
+ *
+ * Adds a reserve map entry to the given blob reserving a region at
+ * address address of length size.
+ *
+ * This function will insert data into the reserve map and will
+ * therefore change the indexes of some entries in the table.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to
+ * contain the new reservation entry
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
int fdt_add_mem_rsv(void *fdt, uint64_t address, uint64_t size);
+
+/**
+ * fdt_del_mem_rsv - remove a memory reserve map entry
+ * @fdt: pointer to the device tree blob
+ * @n: entry to remove
+ *
+ * fdt_del_mem_rsv() removes the n-th memory reserve map entry from
+ * the blob.
+ *
+ * This function will delete data from the reservation table and will
+ * therefore change the indexes of some entries in the table.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_NOTFOUND, there is no entry of the given index (i.e. there
+ * are less than n+1 reserve map entries)
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
int fdt_del_mem_rsv(void *fdt, int n);
+/**
+ * fdt_set_name - change the name of a given node
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: structure block offset of a node
+ * @name: name to give the node
+ *
+ * fdt_set_name() replaces the name (including unit address, if any)
+ * of the given node with the given string. NOTE: this function can't
+ * efficiently check if the new name is unique amongst the given
+ * node's siblings; results are undefined if this function is invoked
+ * with a name equal to one of the given node's siblings.
+ *
+ * This function may insert or delete data from the blob, and will
+ * therefore change the offsets of some existing nodes.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_NOSPACE, there is insufficient free space in the blob
+ * to contain the new name
+ * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE, standard meanings
+ */
+int fdt_set_name(void *fdt, int nodeoffset, const char *name);
+
+/**
+ * fdt_setprop - create or change a property
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to change
+ * @name: name of the property to change
+ * @val: pointer to data to set the property value to
+ * @len: length of the property value
+ *
+ * fdt_setprop() sets the value of the named property in the given
+ * node to the given value and length, creating the property if it
+ * does not already exist.
+ *
+ * This function may insert or delete data from the blob, and will
+ * therefore change the offsets of some existing nodes.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to
+ * contain the new property value
+ * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
int fdt_setprop(void *fdt, int nodeoffset, const char *name,
const void *val, int len);
+
+/**
+ * fdt_setprop_cell - set a property to a single cell value
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to change
+ * @name: name of the property to change
+ * @val: 32-bit integer value for the property (native endian)
+ *
+ * fdt_setprop_cell() sets the value of the named property in the
+ * given node to the given cell value (converting to big-endian if
+ * necessary), or creates a new property with that value if it does
+ * not already exist.
+ *
+ * This function may insert or delete data from the blob, and will
+ * therefore change the offsets of some existing nodes.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to
+ * contain the new property value
+ * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
static inline int fdt_setprop_cell(void *fdt, int nodeoffset, const char *name,
uint32_t val)
{
val = cpu_to_fdt32(val);
return fdt_setprop(fdt, nodeoffset, name, &val, sizeof(val));
}
+
+/**
+ * fdt_setprop_string - set a property to a string value
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to change
+ * @name: name of the property to change
+ * @str: string value for the property
+ *
+ * fdt_setprop_string() sets the value of the named property in the
+ * given node to the given string value (using the length of the
+ * string to determine the new length of the property), or creates a
+ * new property with that value if it does not already exist.
+ *
+ * This function may insert or delete data from the blob, and will
+ * therefore change the offsets of some existing nodes.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to
+ * contain the new property value
+ * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
#define fdt_setprop_string(fdt, nodeoffset, name, str) \
fdt_setprop((fdt), (nodeoffset), (name), (str), strlen(str)+1)
+
+/**
+ * fdt_delprop - delete a property
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to nop
+ * @name: name of the property to nop
+ *
+ * fdt_del_property() will delete the given property.
+ *
+ * This function will delete data from the blob, and will therefore
+ * change the offsets of some existing nodes.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_NOTFOUND, node does not have the named property
+ * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
int fdt_delprop(void *fdt, int nodeoffset, const char *name);
+
+/**
+ * fdt_add_subnode_namelen - creates a new node based on substring
+ * @fdt: pointer to the device tree blob
+ * @parentoffset: structure block offset of a node
+ * @name: name of the subnode to locate
+ * @namelen: number of characters of name to consider
+ *
+ * Identical to fdt_add_subnode(), but use only the first namelen
+ * characters of name as the name of the new node. This is useful for
+ * creating subnodes based on a portion of a larger string, such as a
+ * full path.
+ */
int fdt_add_subnode_namelen(void *fdt, int parentoffset,
const char *name, int namelen);
+
+/**
+ * fdt_add_subnode - creates a new node
+ * @fdt: pointer to the device tree blob
+ * @parentoffset: structure block offset of a node
+ * @name: name of the subnode to locate
+ *
+ * fdt_add_subnode() creates a new node as a subnode of the node at
+ * structure block offset parentoffset, with the given name (which
+ * should include the unit address, if any).
+ *
+ * This function will insert data into the blob, and will therefore
+ * change the offsets of some existing nodes.
+
+ * returns:
+ * structure block offset of the created nodeequested subnode (>=0), on success
+ * -FDT_ERR_NOTFOUND, if the requested subnode does not exist
+ * -FDT_ERR_BADOFFSET, if parentoffset did not point to an FDT_BEGIN_NODE tag
+ * -FDT_ERR_EXISTS, if the node at parentoffset already has a subnode of
+ * the given name
+ * -FDT_ERR_NOSPACE, if there is insufficient free space in the
+ * blob to contain the new node
+ * -FDT_ERR_NOSPACE
+ * -FDT_ERR_BADLAYOUT
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_TRUNCATED, standard meanings.
+ */
int fdt_add_subnode(void *fdt, int parentoffset, const char *name);
+
+/**
+ * fdt_del_node - delete a node (subtree)
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node to nop
+ *
+ * fdt_del_node() will remove the given node, including all its
+ * subnodes if any, from the blob.
+ *
+ * This function will delete data from the blob, and will therefore
+ * change the offsets of some existing nodes.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
int fdt_del_node(void *fdt, int nodeoffset);
/**********************************************************************/
diff --git a/arch/powerpc/boot/libfdt/libfdt_internal.h b/arch/powerpc/boot/libfdt/libfdt_internal.h
index 1e60936..46eb93e 100644
--- a/arch/powerpc/boot/libfdt/libfdt_internal.h
+++ b/arch/powerpc/boot/libfdt/libfdt_internal.h
@@ -52,38 +52,44 @@
*/
#include <fdt.h>
-#define ALIGN(x, a) (((x) + (a) - 1) & ~((a) - 1))
-#define PALIGN(p, a) ((void *)ALIGN((unsigned long)(p), (a)))
+#define FDT_ALIGN(x, a) (((x) + (a) - 1) & ~((a) - 1))
+#define FDT_TAGALIGN(x) (FDT_ALIGN((x), FDT_TAGSIZE))
-#define memeq(p, q, n) (memcmp((p), (q), (n)) == 0)
-#define streq(p, q) (strcmp((p), (q)) == 0)
+#define FDT_CHECK_HEADER(fdt) \
+ { \
+ int err; \
+ if ((err = fdt_check_header(fdt)) != 0) \
+ return err; \
+ }
uint32_t _fdt_next_tag(const void *fdt, int startoffset, int *nextoffset);
+int _fdt_check_node_offset(const void *fdt, int offset);
const char *_fdt_find_string(const char *strtab, int tabsize, const char *s);
int _fdt_node_end_offset(void *fdt, int nodeoffset);
static inline const void *_fdt_offset_ptr(const void *fdt, int offset)
{
- return fdt + fdt_off_dt_struct(fdt) + offset;
+ return (const char *)fdt + fdt_off_dt_struct(fdt) + offset;
}
static inline void *_fdt_offset_ptr_w(void *fdt, int offset)
{
- return (void *)_fdt_offset_ptr(fdt, offset);
+ return (void *)(uintptr_t)_fdt_offset_ptr(fdt, offset);
}
static inline const struct fdt_reserve_entry *_fdt_mem_rsv(const void *fdt, int n)
{
const struct fdt_reserve_entry *rsv_table =
- fdt + fdt_off_mem_rsvmap(fdt);
+ (const struct fdt_reserve_entry *)
+ ((const char *)fdt + fdt_off_mem_rsvmap(fdt));
return rsv_table + n;
}
static inline struct fdt_reserve_entry *_fdt_mem_rsv_w(void *fdt, int n)
{
- return (void *)_fdt_mem_rsv(fdt, n);
+ return (void *)(uintptr_t)_fdt_mem_rsv(fdt, n);
}
-#define SW_MAGIC (~FDT_MAGIC)
+#define FDT_SW_MAGIC (~FDT_MAGIC)
#endif /* _LIBFDT_INTERNAL_H */
diff --git a/arch/powerpc/boot/libfdt_env.h b/arch/powerpc/boot/libfdt_env.h
index a4b0fc9..c89fdb1 100644
--- a/arch/powerpc/boot/libfdt_env.h
+++ b/arch/powerpc/boot/libfdt_env.h
@@ -6,6 +6,7 @@
typedef u32 uint32_t;
typedef u64 uint64_t;
+typedef unsigned long uintptr_t;
#define fdt16_to_cpu(x) (x)
#define cpu_to_fdt16(x) (x)
diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper
index 965c237..ee0dc41 100755
--- a/arch/powerpc/boot/wrapper
+++ b/arch/powerpc/boot/wrapper
@@ -307,7 +307,9 @@
# post-processing needed for some platforms
case "$platform" in
pseries|chrp)
- $objbin/addnote "$ofile"
+ ${CROSS}objcopy -O binary -j .fakeelf "$kernel" "$ofile".rpanote
+ $objbin/addnote "$ofile" "$ofile".rpanote
+ rm -r "$ofile".rpanote
;;
coff)
${CROSS}objcopy -O aixcoff-rs6000 --set-start "$entry" "$ofile"
diff --git a/arch/powerpc/configs/44x/arches_defconfig b/arch/powerpc/configs/44x/arches_defconfig
new file mode 100644
index 0000000..70f4607
--- /dev/null
+++ b/arch/powerpc/configs/44x/arches_defconfig
@@ -0,0 +1,767 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.27-rc5
+# Wed Oct 1 15:54:57 2008
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+# CONFIG_6xx is not set
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+CONFIG_44x=y
+# CONFIG_E200 is not set
+CONFIG_PPC_FPU=y
+CONFIG_4xx=y
+CONFIG_BOOKE=y
+CONFIG_PTE_64BIT=y
+CONFIG_PHYS_64BIT=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_NOT_COHERENT_CACHE=y
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_PPC_DCR_NATIVE=y
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_PPC_DCR=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
+CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+CONFIG_PPC4xx_PCI_EXPRESS=y
+
+#
+# Platform support
+#
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_BAMBOO is not set
+# CONFIG_EBONY is not set
+# CONFIG_SAM440EP is not set
+# CONFIG_SEQUOIA is not set
+# CONFIG_TAISHAN is not set
+# CONFIG_KATMAI is not set
+# CONFIG_RAINIER is not set
+# CONFIG_WARP is not set
+CONFIG_ARCHES=y
+# CONFIG_CANYONLANDS is not set
+# CONFIG_GLACIER is not set
+# CONFIG_YOSEMITE is not set
+# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
+CONFIG_PPC44x_SIMPLE=y
+CONFIG_460EX=y
+# CONFIG_IPIC is not set
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_FSL_ULI1575 is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_SCHED_HRTICK=y
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_MATH_EMULATION is not set
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
+CONFIG_RESOURCES_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_PROC_DEVICETREE=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE=""
+CONFIG_EXTRA_TARGETS=""
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_4xx_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_CONSISTENT_START=0xff100000
+CONFIG_CONSISTENT_SIZE=0x00200000
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+# CONFIG_MTD is not set
+CONFIG_OF_DEVICE=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=35000
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_XILINX_SYSACE is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_IBM_NEW_EMAC=y
+CONFIG_IBM_NEW_EMAC_RXB=256
+CONFIG_IBM_NEW_EMAC_TXB=256
+CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
+CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
+CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
+# CONFIG_IBM_NEW_EMAC_DEBUG is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+CONFIG_IBM_NEW_EMAC_TAH=y
+CONFIG_IBM_NEW_EMAC_EMAC4=y
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_PCI is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
+# CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_VIRQ_DEBUG is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/asp8347_defconfig b/arch/powerpc/configs/83xx/asp8347_defconfig
index 5e6780a..0b1fa20f 100644
--- a/arch/powerpc/configs/83xx/asp8347_defconfig
+++ b/arch/powerpc/configs/83xx/asp8347_defconfig
@@ -164,11 +164,11 @@
#
CONFIG_PPC_MULTIPLATFORM=y
CONFIG_CLASSIC32=y
-CONFIG_PPC_CHRP=y
+# CONFIG_PPC_CHRP is not set
+# CONFIG_PPC_PMAC is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
# CONFIG_PPC_MPC52xx is not set
-CONFIG_PPC_PMAC=y
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PPC_82xx is not set
diff --git a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
index 2028337..b7eae2b 100644
--- a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
@@ -163,11 +163,11 @@
#
CONFIG_PPC_MULTIPLATFORM=y
CONFIG_CLASSIC32=y
-CONFIG_PPC_CHRP=y
+# CONFIG_PPC_CHRP is not set
+# CONFIG_PPC_PMAC is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
# CONFIG_PPC_MPC52xx is not set
-CONFIG_PPC_PMAC=y
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PPC_82xx is not set
diff --git a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
index dd80eb0..b0a27a6 100644
--- a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
@@ -163,11 +163,11 @@
#
CONFIG_PPC_MULTIPLATFORM=y
CONFIG_CLASSIC32=y
-CONFIG_PPC_CHRP=y
+# CONFIG_PPC_CHRP is not set
+# CONFIG_PPC_PMAC is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
# CONFIG_PPC_MPC52xx is not set
-CONFIG_PPC_PMAC=y
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PPC_82xx is not set
diff --git a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
index bdf50c8..ad825bc 100644
--- a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
@@ -163,11 +163,11 @@
#
CONFIG_PPC_MULTIPLATFORM=y
CONFIG_CLASSIC32=y
-CONFIG_PPC_CHRP=y
+# CONFIG_PPC_CHRP is not set
+# CONFIG_PPC_PMAC is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
# CONFIG_PPC_MPC52xx is not set
-CONFIG_PPC_PMAC=y
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PPC_82xx is not set
diff --git a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
index 4eef8c9..3826750 100644
--- a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
@@ -163,11 +163,11 @@
#
CONFIG_PPC_MULTIPLATFORM=y
CONFIG_CLASSIC32=y
-CONFIG_PPC_CHRP=y
+# CONFIG_PPC_CHRP is not set
+# CONFIG_PPC_PMAC is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
# CONFIG_PPC_MPC52xx is not set
-CONFIG_PPC_PMAC=y
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PPC_82xx is not set
diff --git a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
index 8d65139..90aab34 100644
--- a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
@@ -163,11 +163,11 @@
#
CONFIG_PPC_MULTIPLATFORM=y
CONFIG_CLASSIC32=y
-CONFIG_PPC_CHRP=y
+# CONFIG_PPC_CHRP is not set
+# CONFIG_PPC_PMAC is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
# CONFIG_PPC_MPC52xx is not set
-CONFIG_PPC_PMAC=y
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PPC_82xx is not set
diff --git a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
index a8afa39..7458a242 100644
--- a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
@@ -163,11 +163,11 @@
#
CONFIG_PPC_MULTIPLATFORM=y
CONFIG_CLASSIC32=y
-CONFIG_PPC_CHRP=y
+# CONFIG_PPC_CHRP is not set
+# CONFIG_PPC_PMAC is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
# CONFIG_PPC_MPC52xx is not set
-CONFIG_PPC_PMAC=y
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PPC_82xx is not set
diff --git a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
index 24c320a..1a92798 100644
--- a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
@@ -163,11 +163,11 @@
#
CONFIG_PPC_MULTIPLATFORM=y
CONFIG_CLASSIC32=y
-CONFIG_PPC_CHRP=y
+# CONFIG_PPC_CHRP is not set
+# CONFIG_PPC_PMAC is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
# CONFIG_PPC_MPC52xx is not set
-CONFIG_PPC_PMAC=y
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PPC_82xx is not set
diff --git a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
index e029e9e..03d8ced 100644
--- a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
@@ -163,11 +163,11 @@
#
CONFIG_PPC_MULTIPLATFORM=y
CONFIG_CLASSIC32=y
-CONFIG_PPC_CHRP=y
+# CONFIG_PPC_CHRP is not set
+# CONFIG_PPC_PMAC is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
# CONFIG_PPC_MPC52xx is not set
-CONFIG_PPC_PMAC=y
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PPC_82xx is not set
@@ -383,7 +383,84 @@
# CONFIG_FW_LOADER is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_OF_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
diff --git a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
index 7d674be..cdf8417 100644
--- a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
+++ b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
@@ -164,11 +164,11 @@
#
CONFIG_PPC_MULTIPLATFORM=y
CONFIG_CLASSIC32=y
-CONFIG_PPC_CHRP=y
+# CONFIG_PPC_CHRP is not set
+# CONFIG_PPC_PMAC is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
# CONFIG_PPC_MPC52xx is not set
-CONFIG_PPC_PMAC=y
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PPC_82xx is not set
diff --git a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
index de47202..97e02d7 100644
--- a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
@@ -164,11 +164,11 @@
#
CONFIG_PPC_MULTIPLATFORM=y
CONFIG_CLASSIC32=y
-CONFIG_PPC_CHRP=y
+# CONFIG_PPC_CHRP is not set
+# CONFIG_PPC_PMAC is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
# CONFIG_PPC_MPC52xx is not set
-CONFIG_PPC_PMAC=y
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PPC_82xx is not set
diff --git a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
index e8d2d69..5ac3305 100644
--- a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
@@ -164,11 +164,11 @@
#
CONFIG_PPC_MULTIPLATFORM=y
CONFIG_CLASSIC32=y
-CONFIG_PPC_CHRP=y
+# CONFIG_PPC_CHRP is not set
+# CONFIG_PPC_PMAC is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
# CONFIG_PPC_MPC52xx is not set
-CONFIG_PPC_PMAC=y
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PPC_82xx is not set
diff --git a/arch/powerpc/configs/83xx/sbc834x_defconfig b/arch/powerpc/configs/83xx/sbc834x_defconfig
index 9245a67..c359cc2 100644
--- a/arch/powerpc/configs/83xx/sbc834x_defconfig
+++ b/arch/powerpc/configs/83xx/sbc834x_defconfig
@@ -162,11 +162,11 @@
#
CONFIG_PPC_MULTIPLATFORM=y
CONFIG_CLASSIC32=y
-CONFIG_PPC_CHRP=y
+# CONFIG_PPC_CHRP is not set
+# CONFIG_PPC_PMAC is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
# CONFIG_PPC_MPC52xx is not set
-CONFIG_PPC_PMAC=y
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PPC_82xx is not set
diff --git a/arch/powerpc/configs/sbc8641d_defconfig b/arch/powerpc/configs/86xx/gef_sbc610_defconfig
similarity index 76%
copy from arch/powerpc/configs/sbc8641d_defconfig
copy to arch/powerpc/configs/86xx/gef_sbc610_defconfig
index f545421..312d7af 100644
--- a/arch/powerpc/configs/sbc8641d_defconfig
+++ b/arch/powerpc/configs/86xx/gef_sbc610_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc4
-# Thu Aug 21 00:52:15 2008
+# Linux kernel version: 2.6.26-rc5
+# Wed Jun 11 12:06:53 2008
#
# CONFIG_PPC64 is not set
@@ -33,7 +33,6 @@
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_LOCKBREAK=y
@@ -93,6 +92,7 @@
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -100,7 +100,6 @@
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_PCSPKR_PLATFORM=y
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
@@ -118,16 +117,10 @@
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_USE_GENERIC_SMP_HELPERS=y
-# CONFIG_HAVE_CLK is not set
CONFIG_PROC_PAGE_MONITOR=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
@@ -145,7 +138,6 @@
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
@@ -166,38 +158,32 @@
#
CONFIG_PPC_MULTIPLATFORM=y
CONFIG_CLASSIC32=y
-CONFIG_PPC_CHRP=y
-# CONFIG_MPC5121_ADS is not set
-# CONFIG_MPC5121_GENERIC is not set
-# CONFIG_PPC_MPC52xx is not set
-CONFIG_PPC_PMAC=y
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_CHRP is not set
+# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_82xx is not set
-# CONFIG_PQ2ADS is not set
# CONFIG_PPC_83xx is not set
CONFIG_PPC_86xx=y
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
# CONFIG_MPC8641_HPCN is not set
-CONFIG_SBC8641D=y
+# CONFIG_SBC8641D is not set
# CONFIG_MPC8610_HPCD is not set
+CONFIG_GEF_SBC610=y
CONFIG_MPC8641=y
-CONFIG_PPC_NATIVE=y
-# CONFIG_UDBG_RTAS_CONSOLE is not set
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
-CONFIG_PPC_I8259=y
-CONFIG_PPC_RTAS=y
-# CONFIG_RTAS_ERROR_LOGGING is not set
-CONFIG_RTAS_PROC=y
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
# CONFIG_MMIO_NVRAM is not set
-CONFIG_PPC_MPC106=y
+# CONFIG_PPC_MPC106 is not set
# CONFIG_PPC_970_NAP is not set
# CONFIG_PPC_INDIRECT_IO is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
-# CONFIG_PPC601_SYNC_FIX is not set
-# CONFIG_TAU is not set
# CONFIG_FSL_ULI1575 is not set
#
@@ -209,11 +195,11 @@
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
+# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
+CONFIG_HZ_1000=y
+CONFIG_HZ=1000
+# CONFIG_SCHED_HRTICK is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
@@ -221,11 +207,9 @@
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
# CONFIG_IOMMU_HELPER is not set
-# CONFIG_HOTPLUG_CPU is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-# CONFIG_KEXEC is not set
CONFIG_IRQ_ALL_CPUS=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -239,7 +223,6 @@
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
@@ -247,7 +230,6 @@
CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
# CONFIG_PM is not set
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
@@ -255,13 +237,11 @@
#
# Bus options
#
-# CONFIG_ISA is not set
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
CONFIG_FSL_PCI=y
-CONFIG_PPC_PCI_CHOICE=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
@@ -271,10 +251,11 @@
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY=y
-# CONFIG_PCI_DEBUG is not set
+CONFIG_PCI_DEBUG=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
+CONFIG_HAS_RAPIDIO=y
+# CONFIG_RAPIDIO is not set
#
# Advanced setup
@@ -289,6 +270,10 @@
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
+
+#
+# Networking
+#
CONFIG_NET=y
#
@@ -302,7 +287,6 @@
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
@@ -427,7 +411,6 @@
CONFIG_IP_NF_TARGET_ECN=m
# CONFIG_IP_NF_TARGET_TTL is not set
CONFIG_IP_NF_RAW=m
-# CONFIG_IP_NF_SECURITY is not set
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
@@ -451,7 +434,6 @@
CONFIG_IP6_NF_MANGLE=m
# CONFIG_IP6_NF_TARGET_HL is not set
CONFIG_IP6_NF_RAW=m
-# CONFIG_IP6_NF_SECURITY is not set
#
# Bridge: Netfilter Configuration
@@ -474,10 +456,8 @@
CONFIG_ATM_MPOA=m
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
-CONFIG_STP=m
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
-# CONFIG_VLAN_8021Q_GVRP is not set
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
@@ -497,6 +477,7 @@
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
+# CONFIG_NET_SCH_RR is not set
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
@@ -606,7 +587,7 @@
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_OTP is not set
CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
+CONFIG_MTD_CFI_AMDSTD=y
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_RAM is not set
@@ -649,7 +630,6 @@
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
-# CONFIG_MAC_FLOPPY is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
@@ -659,20 +639,19 @@
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_SIZE=131072
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -680,42 +659,151 @@
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=y
-CONFIG_MD_LINEAR=y
-CONFIG_MD_RAID0=y
-CONFIG_MD_RAID1=y
-CONFIG_MD_RAID10=y
-# CONFIG_MD_RAID456 is not set
-CONFIG_MD_MULTIPATH=y
-CONFIG_MD_FAULTY=y
-CONFIG_BLK_DEV_DM=y
-# CONFIG_DM_DEBUG is not set
-CONFIG_DM_CRYPT=y
-CONFIG_DM_SNAPSHOT=y
-CONFIG_DM_MIRROR=y
-CONFIG_DM_ZERO=y
-# CONFIG_DM_MULTIPATH is not set
-# CONFIG_DM_DELAY is not set
-# CONFIG_DM_UEVENT is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_FSL is not set
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+CONFIG_SATA_SIL=y
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
+# CONFIG_MD is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
-
-#
-# Enable only one of the two stacks, unless you know what you are doing
-#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_MACVLAN is not set
@@ -728,22 +816,20 @@
#
# MII PHY device drivers
#
-# CONFIG_MARVELL_PHY is not set
+CONFIG_MARVELL_PHY=y
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
-CONFIG_BROADCOM_PHY=y
+# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
-# CONFIG_MACE is not set
-# CONFIG_BMAC is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
@@ -761,6 +847,7 @@
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
@@ -774,10 +861,9 @@
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
+# CONFIG_GFAR_NAPI is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
@@ -787,6 +873,15 @@
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
CONFIG_ATM_DRIVERS=y
# CONFIG_ATM_DUMMY is not set
@@ -800,7 +895,7 @@
# CONFIG_ATM_AMBASSADOR is not set
# CONFIG_ATM_HORIZON is not set
# CONFIG_ATM_IA is not set
-# CONFIG_ATM_FORE200E is not set
+# CONFIG_ATM_FORE200E_MAYBE is not set
# CONFIG_ATM_HE is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
@@ -820,6 +915,7 @@
CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
+# CONFIG_NET_FC is not set
CONFIG_NETCONSOLE=y
# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
@@ -866,7 +962,6 @@
# Character devices
#
CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -890,18 +985,13 @@
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_PMACZILOG is not set
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_BRIQ_PANEL is not set
-# CONFIG_HVC_RTAS is not set
+# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
+CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
@@ -910,69 +1000,43 @@
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
#
-
-#
-# PC SMBus host controller drivers
-#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
+CONFIG_I2C_MPC=y
# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
-
-#
-# Mac SMBus host controller drivers
-#
-# CONFIG_I2C_HYDRA is not set
-CONFIG_I2C_POWERMAC=y
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-CONFIG_I2C_MPC=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Graphics adapter I2C/DDC channel drivers
-#
# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
+CONFIG_DS1682=y
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
@@ -981,13 +1045,10 @@
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
@@ -997,7 +1058,6 @@
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_AMS is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
@@ -1015,8 +1075,8 @@
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
+CONFIG_SENSORS_LM90=y
+CONFIG_SENSORS_LM92=y
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
@@ -1042,17 +1102,13 @@
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
-CONFIG_SOFT_WATCHDOG=m
-# CONFIG_ALIM7101_WDT is not set
-# CONFIG_8xxx_WDT is not set
-# CONFIG_WATCHDOG_RTAS is not set
+# CONFIG_SOFT_WATCHDOG is not set
#
# PCI-based Watchdog Cards
@@ -1061,6 +1117,11 @@
# CONFIG_WDTPCI is not set
#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+
+#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
@@ -1069,10 +1130,8 @@
#
# Multifunction device drivers
#
-# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
@@ -1089,6 +1148,7 @@
# Multimedia drivers
#
CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
#
# Graphics support
@@ -1111,26 +1171,127 @@
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
-# Enable Host or Gadget support to see Inventra options
+# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_EHCI_FSL is not set
+# CONFIG_USB_EHCI_HCD_PPC_OF is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_HCD_PPC_OF is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_ATM is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
@@ -1138,7 +1299,53 @@
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_LIB=m
+CONFIG_RTC_CLASS=m
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+# CONFIG_RTC_INTF_PROC is not set
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_PPC is not set
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
@@ -1156,28 +1363,18 @@
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
-CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-# CONFIG_REISERFS_FS_SECURITY is not set
+# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
-CONFIG_OCFS2_FS=m
-CONFIG_OCFS2_FS_O2CB=m
-CONFIG_OCFS2_FS_STATS=y
-CONFIG_OCFS2_DEBUG_MASKLOG=y
-# CONFIG_OCFS2_DEBUG_FS is not set
+# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_AUTOFS_FS=m
-CONFIG_AUTOFS4_FS=m
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
@@ -1189,8 +1386,11 @@
#
# DOS/FAT/NT Filesystems
#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
@@ -1203,7 +1403,7 @@
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_CONFIGFS_FS=m
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -1218,11 +1418,10 @@
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
-CONFIG_MINIX_FS=m
-# CONFIG_OMFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
-CONFIG_ROMFS_FS=m
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
@@ -1230,18 +1429,17 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_SMB_NLS_REMOTE="cp437"
+# CONFIG_SMB_FS is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
@@ -1257,9 +1455,8 @@
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=m
+CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
@@ -1308,7 +1505,6 @@
# CONFIG_GENERIC_FIND_FIRST_BIT is not set
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
@@ -1330,13 +1526,11 @@
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
+# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
@@ -1353,34 +1547,20 @@
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
+CONFIG_DEBUGGER=y
# CONFIG_XMON is not set
# CONFIG_IRQSTACKS is not set
-# CONFIG_VIRQ_DEBUG is not set
# CONFIG_BDI_SWITCH is not set
-# CONFIG_BOOTX_TEXT is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
@@ -1390,7 +1570,9 @@
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
+CONFIG_SECURITY_CAPABILITIES=y
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_SECURITY_ROOTPLUG is not set
CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
CONFIG_CRYPTO=y
@@ -1439,10 +1621,6 @@
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
@@ -1474,8 +1652,6 @@
#
CONFIG_CRYPTO_DEFLATE=m
# CONFIG_CRYPTO_LZO is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_CRYPTO_DEV_TALITOS is not set
+# CONFIG_CRYPTO_HW is not set
# CONFIG_PPC_CLOCK is not set
# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mpc8610_hpcd_defconfig b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
similarity index 99%
rename from arch/powerpc/configs/mpc8610_hpcd_defconfig
rename to arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
index 1a99907..c98c6ee 100644
--- a/arch/powerpc/configs/mpc8610_hpcd_defconfig
+++ b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
@@ -165,11 +165,11 @@
#
CONFIG_PPC_MULTIPLATFORM=y
CONFIG_CLASSIC32=y
-CONFIG_PPC_CHRP=y
+# CONFIG_PPC_CHRP is not set
+# CONFIG_PPC_PMAC is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
# CONFIG_PPC_MPC52xx is not set
-CONFIG_PPC_PMAC=y
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PPC_82xx is not set
diff --git a/arch/powerpc/configs/mpc8641_hpcn_defconfig b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
similarity index 99%
rename from arch/powerpc/configs/mpc8641_hpcn_defconfig
rename to arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
index ea09be3..444ddf9 100644
--- a/arch/powerpc/configs/mpc8641_hpcn_defconfig
+++ b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
@@ -167,11 +167,11 @@
#
CONFIG_PPC_MULTIPLATFORM=y
CONFIG_CLASSIC32=y
-CONFIG_PPC_CHRP=y
+# CONFIG_PPC_CHRP is not set
+# CONFIG_PPC_PMAC is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
# CONFIG_PPC_MPC52xx is not set
-CONFIG_PPC_PMAC=y
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PPC_82xx is not set
diff --git a/arch/powerpc/configs/sbc8641d_defconfig b/arch/powerpc/configs/86xx/sbc8641d_defconfig
similarity index 99%
rename from arch/powerpc/configs/sbc8641d_defconfig
rename to arch/powerpc/configs/86xx/sbc8641d_defconfig
index f545421..d900f8f 100644
--- a/arch/powerpc/configs/sbc8641d_defconfig
+++ b/arch/powerpc/configs/86xx/sbc8641d_defconfig
@@ -166,11 +166,11 @@
#
CONFIG_PPC_MULTIPLATFORM=y
CONFIG_CLASSIC32=y
-CONFIG_PPC_CHRP=y
+# CONFIG_PPC_CHRP is not set
+# CONFIG_PPC_PMAC is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
# CONFIG_PPC_MPC52xx is not set
-CONFIG_PPC_PMAC=y
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PPC_82xx is not set
diff --git a/arch/powerpc/configs/ep8248e_defconfig b/arch/powerpc/configs/ep8248e_defconfig
index ef0c6e8..cd691f7 100644
--- a/arch/powerpc/configs/ep8248e_defconfig
+++ b/arch/powerpc/configs/ep8248e_defconfig
@@ -150,11 +150,11 @@
#
CONFIG_PPC_MULTIPLATFORM=y
CONFIG_CLASSIC32=y
-CONFIG_PPC_CHRP=y
+# CONFIG_PPC_CHRP is not set
+# CONFIG_PPC_PMAC is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
# CONFIG_PPC_MPC52xx is not set
-CONFIG_PPC_PMAC=y
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
CONFIG_PPC_82xx=y
diff --git a/arch/powerpc/configs/mgcoge_defconfig b/arch/powerpc/configs/mgcoge_defconfig
new file mode 100644
index 0000000..cc9eaba
--- /dev/null
+++ b/arch/powerpc/configs/mgcoge_defconfig
@@ -0,0 +1,900 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc2
+# Thu May 22 08:18:47 2008
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+CONFIG_6xx=y
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_PPC_FPU=y
+CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_STD_MMU_32=y
+# CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+# CONFIG_PPC_UDBG_16550 is not set
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+# CONFIG_DEFAULT_UIMAGE is not set
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+# CONFIG_EXPERIMENTAL is not set
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+CONFIG_CLASSIC_RCU=y
+
+#
+# Platform support
+#
+# CONFIG_PPC_MULTIPLATFORM is not set
+CONFIG_PPC_82xx=y
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_MPC8272_ADS is not set
+# CONFIG_PQ2FADS is not set
+# CONFIG_EP8248E is not set
+CONFIG_MGCOGE=y
+# CONFIG_PQ2ADS is not set
+CONFIG_8260=y
+CONFIG_8272=y
+# CONFIG_IPIC is not set
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+CONFIG_CPM2=y
+CONFIG_PPC_CPM_NEW_BINDING=y
+# CONFIG_FSL_ULI1575 is not set
+CONFIG_CPM=y
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=y
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+# CONFIG_SECCOMP is not set
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_FSL_SOC=y
+# CONFIG_PCI is not set
+# CONFIG_PCI_DOMAINS is not set
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HAS_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_TASK_SIZE=0xc0000000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_XTABLES is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+# CONFIG_MTD_BLOCK is not set
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+CONFIG_FIXED_PHY=y
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+CONFIG_FS_ENET=y
+CONFIG_FS_ENET_HAS_SCC=y
+# CONFIG_FS_ENET_HAS_FCC is not set
+# CONFIG_FS_ENET_MDIO_FCC is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_CPM=y
+CONFIG_SERIAL_CPM_CONSOLE=y
+# CONFIG_SERIAL_CPM_SCC1 is not set
+# CONFIG_SERIAL_CPM_SCC2 is not set
+# CONFIG_SERIAL_CPM_SCC3 is not set
+# CONFIG_SERIAL_CPM_SCC4 is not set
+CONFIG_SERIAL_CPM_SMC1=y
+CONFIG_SERIAL_CPM_SMC2=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_HFSPLUS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_DEBUGGER is not set
+# CONFIG_KGDB_CONSOLE is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_VIRQ_DEBUG is not set
+CONFIG_BDI_SWITCH=y
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_PCBC=y
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_PPC_CLOCK is not set
+CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mgsuvd_defconfig b/arch/powerpc/configs/mgsuvd_defconfig
new file mode 100644
index 0000000..3cd6ce4
--- /dev/null
+++ b/arch/powerpc/configs/mgsuvd_defconfig
@@ -0,0 +1,872 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc2
+# Wed May 21 13:30:33 2008
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+# CONFIG_6xx is not set
+# CONFIG_PPC_85xx is not set
+CONFIG_PPC_8xx=y
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_8xx=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_NOT_COHERENT_CACHE=y
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+# CONFIG_PPC_UDBG_16550 is not set
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+# CONFIG_DEFAULT_UIMAGE is not set
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+# CONFIG_BUG is not set
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_BASE_FULL is not set
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+# CONFIG_EPOLL is not set
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=1
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+
+#
+# Platform support
+#
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+CONFIG_CPM1=y
+# CONFIG_MPC8XXFADS is not set
+# CONFIG_MPC86XADS is not set
+# CONFIG_MPC885ADS is not set
+# CONFIG_PPC_EP88XC is not set
+# CONFIG_PPC_ADDER875 is not set
+CONFIG_PPC_MGSUVD=y
+
+#
+# MPC8xx CPM Options
+#
+
+#
+# Generic MPC8xx Options
+#
+CONFIG_8xx_COPYBACK=y
+CONFIG_8xx_CPU6=y
+CONFIG_8xx_CPU15=y
+# CONFIG_NO_UCODE_PATCH is not set
+# CONFIG_USB_SOF_UCODE_PATCH is not set
+# CONFIG_I2C_SPI_UCODE_PATCH is not set
+CONFIG_I2C_SPI_SMC1_UCODE_PATCH=y
+CONFIG_UCODE_PATCH=y
+# CONFIG_PQ2ADS is not set
+# CONFIG_IPIC is not set
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+CONFIG_PPC_CPM_NEW_BINDING=y
+# CONFIG_FSL_ULI1575 is not set
+CONFIG_CPM=y
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+CONFIG_HZ_1000=y
+CONFIG_HZ=1000
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+# CONFIG_PROC_DEVICETREE is not set
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+# CONFIG_SECCOMP is not set
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_FSL_SOC=y
+# CONFIG_PCI is not set
+# CONFIG_PCI_DOMAINS is not set
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_PCI_QSPAN is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_HAS_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_TASK_SIZE=0x80000000
+CONFIG_CONSISTENT_START=0xfd000000
+CONFIG_CONSISTENT_SIZE=0x00200000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_CFI_FLAGADM is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+CONFIG_FIXED_PHY=y
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+CONFIG_FS_ENET=y
+CONFIG_FS_ENET_HAS_SCC=y
+# CONFIG_FS_ENET_HAS_FEC is not set
+# CONFIG_FS_ENET_MDIO_FEC is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_CPM=y
+CONFIG_SERIAL_CPM_CONSOLE=y
+# CONFIG_SERIAL_CPM_SCC1 is not set
+# CONFIG_SERIAL_CPM_SCC2 is not set
+# CONFIG_SERIAL_CPM_SCC3 is not set
+# CONFIG_SERIAL_CPM_SCC4 is not set
+CONFIG_SERIAL_CPM_SMC1=y
+# CONFIG_SERIAL_CPM_SMC2 is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+CONFIG_GEN_RTC=y
+# CONFIG_GEN_RTC_X is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_EDAC is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+# CONFIG_EXT2_FS_POSIX_ACL is not set
+# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_VIRQ_DEBUG is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_PPC_CLOCK is not set
+CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mpc8272_ads_defconfig b/arch/powerpc/configs/mpc8272_ads_defconfig
index 7c435c8..ff6f7c4 100644
--- a/arch/powerpc/configs/mpc8272_ads_defconfig
+++ b/arch/powerpc/configs/mpc8272_ads_defconfig
@@ -151,11 +151,11 @@
#
CONFIG_PPC_MULTIPLATFORM=y
CONFIG_CLASSIC32=y
-CONFIG_PPC_CHRP=y
+# CONFIG_PPC_CHRP is not set
+# CONFIG_PPC_PMAC is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
# CONFIG_PPC_MPC52xx is not set
-CONFIG_PPC_PMAC=y
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
CONFIG_PPC_82xx=y
diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig
index 916e3df..991c9bd 100644
--- a/arch/powerpc/configs/mpc83xx_defconfig
+++ b/arch/powerpc/configs/mpc83xx_defconfig
@@ -166,11 +166,11 @@
#
CONFIG_PPC_MULTIPLATFORM=y
CONFIG_CLASSIC32=y
-CONFIG_PPC_CHRP=y
+# CONFIG_PPC_CHRP is not set
+# CONFIG_PPC_PMAC is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
# CONFIG_PPC_MPC52xx is not set
-CONFIG_PPC_PMAC=y
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PPC_82xx is not set
diff --git a/arch/powerpc/configs/mpc8641_hpcn_defconfig b/arch/powerpc/configs/mpc86xx_defconfig
similarity index 97%
copy from arch/powerpc/configs/mpc8641_hpcn_defconfig
copy to arch/powerpc/configs/mpc86xx_defconfig
index ea09be3..9d4be820 100644
--- a/arch/powerpc/configs/mpc8641_hpcn_defconfig
+++ b/arch/powerpc/configs/mpc86xx_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc4
-# Thu Aug 21 00:52:11 2008
+# Linux kernel version: 2.6.27-rc5
+# Tue Sep 23 23:28:38 2008
#
# CONFIG_PPC64 is not set
@@ -100,7 +100,6 @@
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_PCSPKR_PLATFORM=y
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
@@ -161,17 +160,18 @@
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_CLASSIC_RCU=y
+# CONFIG_MPC8xxx_GPIO is not set
#
# Platform support
#
CONFIG_PPC_MULTIPLATFORM=y
CONFIG_CLASSIC32=y
-CONFIG_PPC_CHRP=y
+# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
# CONFIG_PPC_MPC52xx is not set
-CONFIG_PPC_PMAC=y
+# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PPC_82xx is not set
@@ -179,25 +179,22 @@
# CONFIG_PPC_83xx is not set
CONFIG_PPC_86xx=y
CONFIG_MPC8641_HPCN=y
-# CONFIG_SBC8641D is not set
-# CONFIG_MPC8610_HPCD is not set
+CONFIG_SBC8641D=y
+CONFIG_MPC8610_HPCD=y
+CONFIG_GEF_SBC610=y
CONFIG_MPC8641=y
-CONFIG_PPC_NATIVE=y
-# CONFIG_UDBG_RTAS_CONSOLE is not set
+CONFIG_MPC8610=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
CONFIG_PPC_I8259=y
-CONFIG_PPC_RTAS=y
-# CONFIG_RTAS_ERROR_LOGGING is not set
-CONFIG_RTAS_PROC=y
+# CONFIG_PPC_RTAS is not set
# CONFIG_MMIO_NVRAM is not set
-CONFIG_PPC_MPC106=y
+# CONFIG_PPC_MPC106 is not set
# CONFIG_PPC_970_NAP is not set
# CONFIG_PPC_INDIRECT_IO is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
-# CONFIG_PPC601_SYNC_FIX is not set
# CONFIG_TAU is not set
CONFIG_FSL_ULI1575=y
@@ -221,7 +218,6 @@
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
# CONFIG_IOMMU_HELPER is not set
-# CONFIG_HOTPLUG_CPU is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -255,7 +251,6 @@
#
# Bus options
#
-# CONFIG_ISA is not set
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
@@ -425,7 +420,6 @@
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
-# CONFIG_MAC_FLOPPY is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
@@ -528,8 +522,6 @@
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_MESH is not set
-# CONFIG_SCSI_MAC53C94 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
CONFIG_ATA=y
@@ -634,8 +626,6 @@
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
-# CONFIG_MACE is not set
-# CONFIG_BMAC is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
@@ -781,14 +771,11 @@
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_PMACZILOG is not set
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_BRIQ_PANEL is not set
-# CONFIG_HVC_RTAS is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=y
@@ -825,12 +812,6 @@
# CONFIG_I2C_VIAPRO is not set
#
-# Mac SMBus host controller drivers
-#
-# CONFIG_I2C_HYDRA is not set
-CONFIG_I2C_POWERMAC=y
-
-#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_MPC=y
@@ -1135,8 +1116,6 @@
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
CONFIG_SND_PPC=y
-# CONFIG_SND_POWERMAC is not set
-# CONFIG_SND_AOA is not set
CONFIG_SND_USB=y
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
@@ -1567,6 +1546,7 @@
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_XMON is not set
# CONFIG_IRQSTACKS is not set
# CONFIG_BDI_SWITCH is not set
diff --git a/arch/powerpc/configs/pq2fads_defconfig b/arch/powerpc/configs/pq2fads_defconfig
index b390b74..7e17862 100644
--- a/arch/powerpc/configs/pq2fads_defconfig
+++ b/arch/powerpc/configs/pq2fads_defconfig
@@ -152,11 +152,11 @@
#
CONFIG_PPC_MULTIPLATFORM=y
CONFIG_CLASSIC32=y
-CONFIG_PPC_CHRP=y
+# CONFIG_PPC_CHRP is not set
+# CONFIG_PPC_PMAC is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
# CONFIG_PPC_MPC52xx is not set
-CONFIG_PPC_PMAC=y
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
CONFIG_PPC_82xx=y
diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h
index ef8a248..1e94b07 100644
--- a/arch/powerpc/include/asm/cputable.h
+++ b/arch/powerpc/include/asm/cputable.h
@@ -62,6 +62,7 @@
PPC_PMC_DEFAULT = 0,
PPC_PMC_IBM = 1,
PPC_PMC_PA6T = 2,
+ PPC_PMC_G4 = 3,
};
struct pt_regs;
@@ -192,6 +193,7 @@
#define CPU_FTR_NO_SLBIE_B LONG_ASM_CONST(0x0008000000000000)
#define CPU_FTR_VSX LONG_ASM_CONST(0x0010000000000000)
#define CPU_FTR_SAO LONG_ASM_CONST(0x0020000000000000)
+#define CPU_FTR_CP_USE_DCBTZ LONG_ASM_CONST(0x0040000000000000)
#ifndef __ASSEMBLY__
@@ -387,10 +389,11 @@
CPU_FTR_MMCRA | CPU_FTR_CTRL)
#define CPU_FTRS_POWER4 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
- CPU_FTR_MMCRA)
+ CPU_FTR_MMCRA | CPU_FTR_CP_USE_DCBTZ)
#define CPU_FTRS_PPC970 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
- CPU_FTR_ALTIVEC_COMP | CPU_FTR_CAN_NAP | CPU_FTR_MMCRA)
+ CPU_FTR_ALTIVEC_COMP | CPU_FTR_CAN_NAP | CPU_FTR_MMCRA | \
+ CPU_FTR_CP_USE_DCBTZ)
#define CPU_FTRS_POWER5 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
CPU_FTR_MMCRA | CPU_FTR_SMT | \
@@ -411,7 +414,8 @@
#define CPU_FTRS_CELL (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
CPU_FTR_ALTIVEC_COMP | CPU_FTR_MMCRA | CPU_FTR_SMT | \
- CPU_FTR_PAUSE_ZERO | CPU_FTR_CI_LARGE_PAGE | CPU_FTR_CELL_TB_BUG)
+ CPU_FTR_PAUSE_ZERO | CPU_FTR_CI_LARGE_PAGE | \
+ CPU_FTR_CELL_TB_BUG | CPU_FTR_CP_USE_DCBTZ)
#define CPU_FTRS_PA6T (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | \
CPU_FTR_ALTIVEC_COMP | CPU_FTR_CI_LARGE_PAGE | \
diff --git a/arch/powerpc/include/asm/dcr-regs.h b/arch/powerpc/include/asm/dcr-regs.h
index f15296c..828e3aa 100644
--- a/arch/powerpc/include/asm/dcr-regs.h
+++ b/arch/powerpc/include/asm/dcr-regs.h
@@ -68,6 +68,13 @@
#define SDR0_UART3 0x0123
#define SDR0_CUST0 0x4000
+/* SDR for 405EZ */
+#define DCRN_SDR_ICINTSTAT 0x4510
+#define ICINTSTAT_ICRX 0x80000000
+#define ICINTSTAT_ICTX0 0x40000000
+#define ICINTSTAT_ICTX1 0x20000000
+#define ICINTSTAT_ICTX 0x60000000
+
/* SDRs (460EX/460GT) */
#define SDR0_ETH_CFG 0x4103
#define SDR0_ETH_CFG_ECS 0x00000100 /* EMAC int clk source */
diff --git a/arch/powerpc/include/asm/device.h b/arch/powerpc/include/asm/device.h
index 228ab2a..dfd504c 100644
--- a/arch/powerpc/include/asm/device.h
+++ b/arch/powerpc/include/asm/device.h
@@ -16,9 +16,6 @@
/* DMA operations on that device */
struct dma_mapping_ops *dma_ops;
void *dma_data;
-
- /* NUMA node if applicable */
- int numa_node;
};
#endif /* _ASM_POWERPC_DEVICE_H */
diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h
index c7ca45f..fddb229 100644
--- a/arch/powerpc/include/asm/dma-mapping.h
+++ b/arch/powerpc/include/asm/dma-mapping.h
@@ -44,8 +44,6 @@
#endif /* ! CONFIG_NOT_COHERENT_CACHE */
-#ifdef CONFIG_PPC64
-
static inline unsigned long device_to_mask(struct device *dev)
{
if (dev->dma_mask && *dev->dma_mask)
@@ -76,8 +74,24 @@
struct dma_attrs *attrs);
int (*dma_supported)(struct device *dev, u64 mask);
int (*set_dma_mask)(struct device *dev, u64 dma_mask);
+ dma_addr_t (*map_page)(struct device *dev, struct page *page,
+ unsigned long offset, size_t size,
+ enum dma_data_direction direction,
+ struct dma_attrs *attrs);
+ void (*unmap_page)(struct device *dev,
+ dma_addr_t dma_address, size_t size,
+ enum dma_data_direction direction,
+ struct dma_attrs *attrs);
};
+/*
+ * Available generic sets of operations
+ */
+#ifdef CONFIG_PPC64
+extern struct dma_mapping_ops dma_iommu_ops;
+#endif
+extern struct dma_mapping_ops dma_direct_ops;
+
static inline struct dma_mapping_ops *get_dma_ops(struct device *dev)
{
/* We don't handle the NULL dev case for ISA for now. We could
@@ -85,8 +99,19 @@
* only ISA DMA device we support is the floppy and we have a hack
* in the floppy driver directly to get a device for us.
*/
- if (unlikely(dev == NULL || dev->archdata.dma_ops == NULL))
+
+ if (unlikely(dev == NULL) || dev->archdata.dma_ops == NULL) {
+#ifdef CONFIG_PPC64
return NULL;
+#else
+ /* Use default on 32-bit if dma_ops is not set up */
+ /* TODO: Long term, we should fix drivers so that dev and
+ * archdata dma_ops are set up for all buses.
+ */
+ return &dma_direct_ops;
+#endif
+ }
+
return dev->archdata.dma_ops;
}
@@ -123,6 +148,12 @@
return 0;
}
+/*
+ * TODO: map_/unmap_single will ideally go away, to be completely
+ * replaced by map/unmap_page. Until then, we allow dma_ops to have
+ * one or the other, or both by checking to see if the specific
+ * function requested exists; and if not, falling back on the other set.
+ */
static inline dma_addr_t dma_map_single_attrs(struct device *dev,
void *cpu_addr,
size_t size,
@@ -132,7 +163,14 @@
struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
BUG_ON(!dma_ops);
- return dma_ops->map_single(dev, cpu_addr, size, direction, attrs);
+
+ if (dma_ops->map_single)
+ return dma_ops->map_single(dev, cpu_addr, size, direction,
+ attrs);
+
+ return dma_ops->map_page(dev, virt_to_page(cpu_addr),
+ (unsigned long)cpu_addr % PAGE_SIZE, size,
+ direction, attrs);
}
static inline void dma_unmap_single_attrs(struct device *dev,
@@ -144,7 +182,13 @@
struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
BUG_ON(!dma_ops);
- dma_ops->unmap_single(dev, dma_addr, size, direction, attrs);
+
+ if (dma_ops->unmap_single) {
+ dma_ops->unmap_single(dev, dma_addr, size, direction, attrs);
+ return;
+ }
+
+ dma_ops->unmap_page(dev, dma_addr, size, direction, attrs);
}
static inline dma_addr_t dma_map_page_attrs(struct device *dev,
@@ -156,8 +200,13 @@
struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
BUG_ON(!dma_ops);
+
+ if (dma_ops->map_page)
+ return dma_ops->map_page(dev, page, offset, size, direction,
+ attrs);
+
return dma_ops->map_single(dev, page_address(page) + offset, size,
- direction, attrs);
+ direction, attrs);
}
static inline void dma_unmap_page_attrs(struct device *dev,
@@ -169,6 +218,12 @@
struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
BUG_ON(!dma_ops);
+
+ if (dma_ops->unmap_page) {
+ dma_ops->unmap_page(dev, dma_address, size, direction, attrs);
+ return;
+ }
+
dma_ops->unmap_single(dev, dma_address, size, direction, attrs);
}
@@ -253,126 +308,6 @@
dma_unmap_sg_attrs(dev, sg, nhwentries, direction, NULL);
}
-/*
- * Available generic sets of operations
- */
-extern struct dma_mapping_ops dma_iommu_ops;
-extern struct dma_mapping_ops dma_direct_ops;
-
-#else /* CONFIG_PPC64 */
-
-#define dma_supported(dev, mask) (1)
-
-static inline int dma_set_mask(struct device *dev, u64 dma_mask)
-{
- if (!dev->dma_mask || !dma_supported(dev, mask))
- return -EIO;
-
- *dev->dma_mask = dma_mask;
-
- return 0;
-}
-
-static inline void *dma_alloc_coherent(struct device *dev, size_t size,
- dma_addr_t * dma_handle,
- gfp_t gfp)
-{
-#ifdef CONFIG_NOT_COHERENT_CACHE
- return __dma_alloc_coherent(size, dma_handle, gfp);
-#else
- void *ret;
- /* ignore region specifiers */
- gfp &= ~(__GFP_DMA | __GFP_HIGHMEM);
-
- if (dev == NULL || dev->coherent_dma_mask < 0xffffffff)
- gfp |= GFP_DMA;
-
- ret = (void *)__get_free_pages(gfp, get_order(size));
-
- if (ret != NULL) {
- memset(ret, 0, size);
- *dma_handle = virt_to_bus(ret);
- }
-
- return ret;
-#endif
-}
-
-static inline void
-dma_free_coherent(struct device *dev, size_t size, void *vaddr,
- dma_addr_t dma_handle)
-{
-#ifdef CONFIG_NOT_COHERENT_CACHE
- __dma_free_coherent(size, vaddr);
-#else
- free_pages((unsigned long)vaddr, get_order(size));
-#endif
-}
-
-static inline dma_addr_t
-dma_map_single(struct device *dev, void *ptr, size_t size,
- enum dma_data_direction direction)
-{
- BUG_ON(direction == DMA_NONE);
-
- __dma_sync(ptr, size, direction);
-
- return virt_to_bus(ptr);
-}
-
-static inline void dma_unmap_single(struct device *dev, dma_addr_t dma_addr,
- size_t size,
- enum dma_data_direction direction)
-{
- /* We do nothing. */
-}
-
-static inline dma_addr_t
-dma_map_page(struct device *dev, struct page *page,
- unsigned long offset, size_t size,
- enum dma_data_direction direction)
-{
- BUG_ON(direction == DMA_NONE);
-
- __dma_sync_page(page, offset, size, direction);
-
- return page_to_bus(page) + offset;
-}
-
-static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
- size_t size,
- enum dma_data_direction direction)
-{
- /* We do nothing. */
-}
-
-static inline int
-dma_map_sg(struct device *dev, struct scatterlist *sgl, int nents,
- enum dma_data_direction direction)
-{
- struct scatterlist *sg;
- int i;
-
- BUG_ON(direction == DMA_NONE);
-
- for_each_sg(sgl, sg, nents, i) {
- BUG_ON(!sg_page(sg));
- __dma_sync_page(sg_page(sg), sg->offset, sg->length, direction);
- sg->dma_address = page_to_bus(sg_page(sg)) + sg->offset;
- }
-
- return nents;
-}
-
-static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
- int nhwentries,
- enum dma_data_direction direction)
-{
- /* We don't do anything here. */
-}
-
-#endif /* CONFIG_PPC64 */
-
static inline void dma_sync_single_for_cpu(struct device *dev,
dma_addr_t dma_handle, size_t size,
enum dma_data_direction direction)
diff --git a/arch/powerpc/include/asm/exception.h b/arch/powerpc/include/asm/exception.h
index 329148b..d3d4534 100644
--- a/arch/powerpc/include/asm/exception.h
+++ b/arch/powerpc/include/asm/exception.h
@@ -53,14 +53,8 @@
* low halfword of the address, but for Kdump we need the whole low
* word.
*/
-#ifdef CONFIG_CRASH_DUMP
#define LOAD_HANDLER(reg, label) \
- oris reg,reg,(label)@h; /* virt addr of handler ... */ \
- ori reg,reg,(label)@l; /* .. and the rest */
-#else
-#define LOAD_HANDLER(reg, label) \
- ori reg,reg,(label)@l; /* virt addr of handler ... */
-#endif
+ addi reg,reg,(label)-_stext; /* virt addr of handler ... */
#define EXCEPTION_PROLOG_1(area) \
mfspr r13,SPRN_SPRG3; /* get paca address into r13 */ \
@@ -72,37 +66,12 @@
std r9,area+EX_R13(r13); \
mfcr r9
-/*
- * Equal to EXCEPTION_PROLOG_PSERIES, except that it forces 64bit mode.
- * The firmware calls the registered system_reset_fwnmi and
- * machine_check_fwnmi handlers in 32bit mode if the cpu happens to run
- * a 32bit application at the time of the event.
- * This firmware bug is present on POWER4 and JS20.
- */
-#define EXCEPTION_PROLOG_PSERIES_FORCE_64BIT(area, label) \
- EXCEPTION_PROLOG_1(area); \
- clrrdi r12,r13,32; /* get high part of &label */ \
- mfmsr r10; \
- /* force 64bit mode */ \
- li r11,5; /* MSR_SF_LG|MSR_ISF_LG */ \
- rldimi r10,r11,61,0; /* insert into top 3 bits */ \
- /* done 64bit mode */ \
- mfspr r11,SPRN_SRR0; /* save SRR0 */ \
- LOAD_HANDLER(r12,label) \
- ori r10,r10,MSR_IR|MSR_DR|MSR_RI; \
- mtspr SPRN_SRR0,r12; \
- mfspr r12,SPRN_SRR1; /* and SRR1 */ \
- mtspr SPRN_SRR1,r10; \
- rfid; \
- b . /* prevent speculative execution */
-
#define EXCEPTION_PROLOG_PSERIES(area, label) \
EXCEPTION_PROLOG_1(area); \
- clrrdi r12,r13,32; /* get high part of &label */ \
- mfmsr r10; \
+ ld r12,PACAKBASE(r13); /* get high part of &label */ \
+ ld r10,PACAKMSR(r13); /* get MSR value for kernel */ \
mfspr r11,SPRN_SRR0; /* save SRR0 */ \
LOAD_HANDLER(r12,label) \
- ori r10,r10,MSR_IR|MSR_DR|MSR_RI; \
mtspr SPRN_SRR0,r12; \
mfspr r12,SPRN_SRR1; /* and SRR1 */ \
mtspr SPRN_SRR1,r10; \
@@ -210,11 +179,10 @@
std r10,PACA_EXGEN+EX_R13(r13); \
std r11,PACA_EXGEN+EX_R11(r13); \
std r12,PACA_EXGEN+EX_R12(r13); \
- clrrdi r12,r13,32; /* get high part of &label */ \
- mfmsr r10; \
+ ld r12,PACAKBASE(r13); /* get high part of &label */ \
+ ld r10,PACAKMSR(r13); /* get MSR value for kernel */ \
mfspr r11,SPRN_SRR0; /* save SRR0 */ \
LOAD_HANDLER(r12,label##_common) \
- ori r10,r10,MSR_IR|MSR_DR|MSR_RI; \
mtspr SPRN_SRR0,r12; \
mfspr r12,SPRN_SRR1; /* and SRR1 */ \
mtspr SPRN_SRR1,r10; \
diff --git a/arch/powerpc/include/asm/fsl_lbc.h b/arch/powerpc/include/asm/fsl_lbc.h
index 303f548..63a4f77 100644
--- a/arch/powerpc/include/asm/fsl_lbc.h
+++ b/arch/powerpc/include/asm/fsl_lbc.h
@@ -23,9 +23,9 @@
#ifndef __ASM_FSL_LBC_H
#define __ASM_FSL_LBC_H
+#include <linux/compiler.h>
#include <linux/types.h>
-#include <linux/spinlock.h>
-#include <asm/io.h>
+#include <linux/io.h>
struct fsl_lbc_bank {
__be32 br; /**< Base Register */
@@ -227,9 +227,6 @@
u8 res8[0xF00];
};
-extern struct fsl_lbc_regs __iomem *fsl_lbc_regs;
-extern spinlock_t fsl_lbc_lock;
-
/*
* FSL UPM routines
*/
@@ -268,44 +265,7 @@
cpu_relax();
}
-/**
- * fsl_upm_run_pattern - actually run an UPM pattern
- * @upm: pointer to the fsl_upm structure obtained via fsl_upm_find
- * @io_base: remapped pointer to where memory access should happen
- * @mar: MAR register content during pattern execution
- *
- * This function triggers dummy write to the memory specified by the io_base,
- * thus UPM pattern actually executed. Note that mar usage depends on the
- * pre-programmed AMX bits in the UPM RAM.
- */
-static inline int fsl_upm_run_pattern(struct fsl_upm *upm,
- void __iomem *io_base, u32 mar)
-{
- int ret = 0;
- unsigned long flags;
-
- spin_lock_irqsave(&fsl_lbc_lock, flags);
-
- out_be32(&fsl_lbc_regs->mar, mar << (32 - upm->width));
-
- switch (upm->width) {
- case 8:
- out_8(io_base, 0x0);
- break;
- case 16:
- out_be16(io_base, 0x0);
- break;
- case 32:
- out_be32(io_base, 0x0);
- break;
- default:
- ret = -EINVAL;
- break;
- }
-
- spin_unlock_irqrestore(&fsl_lbc_lock, flags);
-
- return ret;
-}
+extern int fsl_upm_run_pattern(struct fsl_upm *upm, void __iomem *io_base,
+ u32 mar);
#endif /* __ASM_FSL_LBC_H */
diff --git a/arch/powerpc/include/asm/highmem.h b/arch/powerpc/include/asm/highmem.h
index 5d99b648..91c58952 100644
--- a/arch/powerpc/include/asm/highmem.h
+++ b/arch/powerpc/include/asm/highmem.h
@@ -84,7 +84,7 @@
#ifdef CONFIG_DEBUG_HIGHMEM
BUG_ON(!pte_none(*(kmap_pte-idx)));
#endif
- set_pte_at(&init_mm, vaddr, kmap_pte-idx, mk_pte(page, prot));
+ __set_pte_at(&init_mm, vaddr, kmap_pte-idx, mk_pte(page, prot));
flush_tlb_page(NULL, vaddr);
return (void*) vaddr;
diff --git a/arch/powerpc/include/asm/io.h b/arch/powerpc/include/asm/io.h
index 77c7fa0..08266d2 100644
--- a/arch/powerpc/include/asm/io.h
+++ b/arch/powerpc/include/asm/io.h
@@ -711,7 +711,7 @@
/*
* Change "struct page" to physical address.
*/
-#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT)
+#define page_to_phys(page) ((phys_addr_t)page_to_pfn(page) << PAGE_SHIFT)
/* We do NOT want virtual merging, it would put too much pressure on
* our iommu allocator. Instead, we want drivers to be smart enough
diff --git a/arch/powerpc/include/asm/irq.h b/arch/powerpc/include/asm/irq.h
index a372f76..0a51376 100644
--- a/arch/powerpc/include/asm/irq.h
+++ b/arch/powerpc/include/asm/irq.h
@@ -236,15 +236,27 @@
extern unsigned int irq_create_direct_mapping(struct irq_host *host);
/**
- * irq_radix_revmap - Find a linux virq from a hw irq number.
+ * irq_radix_revmap_insert - Insert a hw irq to linux virq number mapping.
+ * @host: host owning this hardware interrupt
+ * @virq: linux irq number
+ * @hwirq: hardware irq number in that host space
+ *
+ * This is for use by irq controllers that use a radix tree reverse
+ * mapping for fast lookup.
+ */
+extern void irq_radix_revmap_insert(struct irq_host *host, unsigned int virq,
+ irq_hw_number_t hwirq);
+
+/**
+ * irq_radix_revmap_lookup - Find a linux virq from a hw irq number.
* @host: host owning this hardware interrupt
* @hwirq: hardware irq number in that host space
*
* This is a fast path, for use by irq controller code that uses radix tree
* revmaps
*/
-extern unsigned int irq_radix_revmap(struct irq_host *host,
- irq_hw_number_t hwirq);
+extern unsigned int irq_radix_revmap_lookup(struct irq_host *host,
+ irq_hw_number_t hwirq);
/**
* irq_linear_revmap - Find a linux virq from a hw irq number.
diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h
index 893aafd..2740c44 100644
--- a/arch/powerpc/include/asm/machdep.h
+++ b/arch/powerpc/include/asm/machdep.h
@@ -88,8 +88,6 @@
unsigned long (*tce_get)(struct iommu_table *tbl,
long index);
void (*tce_flush)(struct iommu_table *tbl);
- void (*pci_dma_dev_setup)(struct pci_dev *dev);
- void (*pci_dma_bus_setup)(struct pci_bus *bus);
void __iomem * (*ioremap)(phys_addr_t addr, unsigned long size,
unsigned long flags);
@@ -101,6 +99,9 @@
#endif
#endif /* CONFIG_PPC64 */
+ void (*pci_dma_dev_setup)(struct pci_dev *dev);
+ void (*pci_dma_bus_setup)(struct pci_bus *bus);
+
int (*probe)(void);
void (*setup_arch)(void); /* Optional, may be NULL */
void (*init_early)(void);
diff --git a/arch/powerpc/include/asm/mman.h b/arch/powerpc/include/asm/mman.h
index 9209f75..e7b99ba 100644
--- a/arch/powerpc/include/asm/mman.h
+++ b/arch/powerpc/include/asm/mman.h
@@ -44,7 +44,7 @@
static inline pgprot_t arch_vm_get_page_prot(unsigned long vm_flags)
{
- return (vm_flags & VM_SAO) ? __pgprot(_PAGE_SAO) : 0;
+ return (vm_flags & VM_SAO) ? __pgprot(_PAGE_SAO) : __pgprot(0);
}
#define arch_vm_get_page_prot(vm_flags) arch_vm_get_page_prot(vm_flags)
diff --git a/arch/powerpc/include/asm/mmu-hash64.h b/arch/powerpc/include/asm/mmu-hash64.h
index c2df53c5c..5a44174 100644
--- a/arch/powerpc/include/asm/mmu-hash64.h
+++ b/arch/powerpc/include/asm/mmu-hash64.h
@@ -437,7 +437,7 @@
})
#endif /* 1 */
-/* This is only valid for addresses >= KERNELBASE */
+/* This is only valid for addresses >= PAGE_OFFSET */
static inline unsigned long get_kernel_vsid(unsigned long ea, int ssize)
{
if (ssize == MMU_SEGSIZE_256M)
diff --git a/arch/powerpc/include/asm/mpic.h b/arch/powerpc/include/asm/mpic.h
index fe566a3..34d9ac4 100644
--- a/arch/powerpc/include/asm/mpic.h
+++ b/arch/powerpc/include/asm/mpic.h
@@ -5,6 +5,7 @@
#include <linux/irq.h>
#include <linux/sysdev.h>
#include <asm/dcr.h>
+#include <asm/msi_bitmap.h>
/*
* Global registers
@@ -301,8 +302,7 @@
#endif
#ifdef CONFIG_PCI_MSI
- spinlock_t bitmap_lock;
- unsigned long *hwirq_bitmap;
+ struct msi_bitmap msi_bitmap;
#endif
#ifdef CONFIG_MPIC_BROKEN_REGREAD
diff --git a/arch/powerpc/include/asm/msi_bitmap.h b/arch/powerpc/include/asm/msi_bitmap.h
new file mode 100644
index 0000000..97ac3f4
--- /dev/null
+++ b/arch/powerpc/include/asm/msi_bitmap.h
@@ -0,0 +1,35 @@
+#ifndef _POWERPC_SYSDEV_MSI_BITMAP_H
+#define _POWERPC_SYSDEV_MSI_BITMAP_H
+
+/*
+ * Copyright 2008, Michael Ellerman, IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ */
+
+#include <linux/of.h>
+#include <asm/irq.h>
+
+struct msi_bitmap {
+ struct device_node *of_node;
+ unsigned long *bitmap;
+ spinlock_t lock;
+ unsigned int irq_count;
+};
+
+int msi_bitmap_alloc_hwirqs(struct msi_bitmap *bmp, int num);
+void msi_bitmap_free_hwirqs(struct msi_bitmap *bmp, unsigned int offset,
+ unsigned int num);
+void msi_bitmap_reserve_hwirq(struct msi_bitmap *bmp, unsigned int hwirq);
+
+int msi_bitmap_reserve_dt_hwirqs(struct msi_bitmap *bmp);
+
+int msi_bitmap_alloc(struct msi_bitmap *bmp, unsigned int irq_count,
+ struct device_node *of_node);
+void msi_bitmap_free(struct msi_bitmap *bmp);
+
+#endif /* _POWERPC_SYSDEV_MSI_BITMAP_H */
diff --git a/arch/powerpc/include/asm/of_device.h b/arch/powerpc/include/asm/of_device.h
index 3c12399..a64debf 100644
--- a/arch/powerpc/include/asm/of_device.h
+++ b/arch/powerpc/include/asm/of_device.h
@@ -24,8 +24,5 @@
extern int of_device_uevent(struct device *dev,
struct kobj_uevent_env *env);
-/* This is just here during the transition */
-#include <linux/of_device.h>
-
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_OF_DEVICE_H */
diff --git a/arch/powerpc/include/asm/of_platform.h b/arch/powerpc/include/asm/of_platform.h
index 18659ef..53b46507 100644
--- a/arch/powerpc/include/asm/of_platform.h
+++ b/arch/powerpc/include/asm/of_platform.h
@@ -11,9 +11,6 @@
*
*/
-/* This is just here during the transition */
-#include <linux/of_platform.h>
-
/* Platform drivers register/unregister */
static inline int of_register_platform_driver(struct of_platform_driver *drv)
{
diff --git a/arch/powerpc/include/asm/paca.h b/arch/powerpc/include/asm/paca.h
index 6493a39..082b3ae 100644
--- a/arch/powerpc/include/asm/paca.h
+++ b/arch/powerpc/include/asm/paca.h
@@ -62,6 +62,8 @@
u16 paca_index; /* Logical processor number */
u64 kernel_toc; /* Kernel TOC address */
+ u64 kernelbase; /* Base address of kernel */
+ u64 kernel_msr; /* MSR while running in kernel */
u64 stab_real; /* Absolute address of segment table */
u64 stab_addr; /* Virtual address of segment table */
void *emergency_sp; /* pointer to emergency stack */
diff --git a/arch/powerpc/include/asm/page.h b/arch/powerpc/include/asm/page.h
index e088545..64e1445 100644
--- a/arch/powerpc/include/asm/page.h
+++ b/arch/powerpc/include/asm/page.h
@@ -71,15 +71,21 @@
#define PAGE_OFFSET ASM_CONST(CONFIG_PAGE_OFFSET)
#define LOAD_OFFSET ASM_CONST((CONFIG_KERNEL_START-CONFIG_PHYSICAL_START))
-#if defined(CONFIG_RELOCATABLE) && defined(CONFIG_FLATMEM)
+#if defined(CONFIG_RELOCATABLE)
#ifndef __ASSEMBLY__
extern phys_addr_t memstart_addr;
extern phys_addr_t kernstart_addr;
#endif
#define PHYSICAL_START kernstart_addr
-#define MEMORY_START memstart_addr
#else
#define PHYSICAL_START ASM_CONST(CONFIG_PHYSICAL_START)
+#endif
+
+#ifdef CONFIG_PPC64
+#define MEMORY_START 0UL
+#elif defined(CONFIG_RELOCATABLE)
+#define MEMORY_START memstart_addr
+#else
#define MEMORY_START (PHYSICAL_START + PAGE_OFFSET - KERNELBASE)
#endif
@@ -92,8 +98,8 @@
#define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT)
#define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
-#define __va(x) ((void *)((unsigned long)(x) - PHYSICAL_START + KERNELBASE))
-#define __pa(x) ((unsigned long)(x) + PHYSICAL_START - KERNELBASE)
+#define __va(x) ((void *)((unsigned long)(x) + PAGE_OFFSET - MEMORY_START))
+#define __pa(x) ((unsigned long)(x) - PAGE_OFFSET + MEMORY_START)
/*
* Unfortunately the PLT is in the BSS in the PPC32 ELF ABI,
diff --git a/arch/powerpc/include/asm/page_32.h b/arch/powerpc/include/asm/page_32.h
index ebfae53..d77072a 100644
--- a/arch/powerpc/include/asm/page_32.h
+++ b/arch/powerpc/include/asm/page_32.h
@@ -13,10 +13,16 @@
#define ARCH_KMALLOC_MINALIGN L1_CACHE_BYTES
#endif
+#ifdef CONFIG_PTE_64BIT
+#define PTE_FLAGS_OFFSET 4 /* offset of PTE flags, in bytes */
+#else
+#define PTE_FLAGS_OFFSET 0
+#endif
+
#ifndef __ASSEMBLY__
/*
* The basic type of a PTE - 64 bits for those CPUs with > 32 bit
- * physical addressing. For now this just the IBM PPC440.
+ * physical addressing.
*/
#ifdef CONFIG_PTE_64BIT
typedef unsigned long long pte_basic_t;
diff --git a/arch/powerpc/include/asm/pci.h b/arch/powerpc/include/asm/pci.h
index a05a942..0e52c78 100644
--- a/arch/powerpc/include/asm/pci.h
+++ b/arch/powerpc/include/asm/pci.h
@@ -60,6 +60,14 @@
return channel ? 15 : 14;
}
+#ifdef CONFIG_PCI
+extern void set_pci_dma_ops(struct dma_mapping_ops *dma_ops);
+extern struct dma_mapping_ops *get_pci_dma_ops(void);
+#else /* CONFIG_PCI */
+#define set_pci_dma_ops(d)
+#define get_pci_dma_ops() NULL
+#endif
+
#ifdef CONFIG_PPC64
/*
@@ -70,9 +78,6 @@
#define PCI_DISABLE_MWI
#ifdef CONFIG_PCI
-extern void set_pci_dma_ops(struct dma_mapping_ops *dma_ops);
-extern struct dma_mapping_ops *get_pci_dma_ops(void);
-
static inline void pci_dma_burst_advice(struct pci_dev *pdev,
enum pci_dma_burst_strategy *strat,
unsigned long *strategy_parameter)
@@ -89,9 +94,6 @@
*strat = PCI_DMA_BURST_MULTIPLE;
*strategy_parameter = cacheline_size;
}
-#else /* CONFIG_PCI */
-#define set_pci_dma_ops(d)
-#define get_pci_dma_ops() NULL
#endif
#else /* 32-bit */
diff --git a/arch/powerpc/include/asm/pgtable-ppc32.h b/arch/powerpc/include/asm/pgtable-ppc32.h
index 6fe39e3..6ab7c67 100644
--- a/arch/powerpc/include/asm/pgtable-ppc32.h
+++ b/arch/powerpc/include/asm/pgtable-ppc32.h
@@ -261,6 +261,7 @@
#define _PAGE_HWEXEC 0x00000004 /* H: Execute permission */
#define _PAGE_ACCESSED 0x00000008 /* S: Page referenced */
#define _PAGE_DIRTY 0x00000010 /* S: Page dirty */
+#define _PAGE_SPECIAL 0x00000020 /* S: Special page */
#define _PAGE_USER 0x00000040 /* S: User page */
#define _PAGE_ENDIAN 0x00000080 /* H: E bit */
#define _PAGE_GUARDED 0x00000100 /* H: G bit */
@@ -276,6 +277,7 @@
/* ERPN in a PTE never gets cleared, ignore it */
#define _PTE_NONE_MASK 0xffffffff00000000ULL
+#define __HAVE_ARCH_PTE_SPECIAL
#elif defined(CONFIG_FSL_BOOKE)
/*
@@ -305,6 +307,7 @@
#define _PAGE_COHERENT 0x00100 /* H: M bit */
#define _PAGE_NO_CACHE 0x00200 /* H: I bit */
#define _PAGE_WRITETHRU 0x00400 /* H: W bit */
+#define _PAGE_SPECIAL 0x00800 /* S: Special page */
#ifdef CONFIG_PTE_64BIT
/* ERPN in a PTE never gets cleared, ignore it */
@@ -315,6 +318,8 @@
#define _PMD_PRESENT_MASK (PAGE_MASK)
#define _PMD_BAD (~PAGE_MASK)
+#define __HAVE_ARCH_PTE_SPECIAL
+
#elif defined(CONFIG_8xx)
/* Definitions for 8xx embedded chips. */
#define _PAGE_PRESENT 0x0001 /* Page is valid */
@@ -362,8 +367,14 @@
#define _PAGE_ACCESSED 0x100 /* R: page referenced */
#define _PAGE_EXEC 0x200 /* software: i-cache coherency required */
#define _PAGE_RW 0x400 /* software: user write access allowed */
+#define _PAGE_SPECIAL 0x800 /* software: Special page */
+#ifdef CONFIG_PTE_64BIT
+/* We never clear the high word of the pte */
+#define _PTE_NONE_MASK (0xffffffff00000000ULL | _PAGE_HASHPTE)
+#else
#define _PTE_NONE_MASK _PAGE_HASHPTE
+#endif
#define _PMD_PRESENT 0
#define _PMD_PRESENT_MASK (PAGE_MASK)
@@ -372,6 +383,8 @@
/* Hash table based platforms need atomic updates of the linux PTE */
#define PTE_ATOMIC_UPDATES 1
+#define __HAVE_ARCH_PTE_SPECIAL
+
#endif
/*
@@ -404,6 +417,9 @@
#ifndef _PAGE_WRITETHRU
#define _PAGE_WRITETHRU 0
#endif
+#ifndef _PAGE_SPECIAL
+#define _PAGE_SPECIAL 0
+#endif
#ifndef _PMD_PRESENT_MASK
#define _PMD_PRESENT_MASK _PMD_PRESENT
#endif
@@ -415,11 +431,11 @@
#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY)
-#define PAGE_PROT_BITS __pgprot(_PAGE_GUARDED | _PAGE_COHERENT | _PAGE_NO_CACHE | \
- _PAGE_WRITETHRU | _PAGE_ENDIAN | \
- _PAGE_USER | _PAGE_ACCESSED | \
- _PAGE_RW | _PAGE_HWWRITE | _PAGE_DIRTY | \
- _PAGE_EXEC | _PAGE_HWEXEC)
+#define PAGE_PROT_BITS (_PAGE_GUARDED | _PAGE_COHERENT | _PAGE_NO_CACHE | \
+ _PAGE_WRITETHRU | _PAGE_ENDIAN | \
+ _PAGE_USER | _PAGE_ACCESSED | \
+ _PAGE_RW | _PAGE_HWWRITE | _PAGE_DIRTY | \
+ _PAGE_EXEC | _PAGE_HWEXEC)
/*
* Note: the _PAGE_COHERENT bit automatically gets set in the hardware
* PTE if CONFIG_SMP is defined (hash_page does this); there is no need
@@ -517,7 +533,8 @@
#define pte_none(pte) ((pte_val(pte) & ~_PTE_NONE_MASK) == 0)
#define pte_present(pte) (pte_val(pte) & _PAGE_PRESENT)
-#define pte_clear(mm,addr,ptep) do { set_pte_at((mm), (addr), (ptep), __pte(0)); } while (0)
+#define pte_clear(mm, addr, ptep) \
+ do { pte_update(ptep, ~_PAGE_HASHPTE, 0); } while (0)
#define pmd_none(pmd) (!pmd_val(pmd))
#define pmd_bad(pmd) (pmd_val(pmd) & _PMD_BAD)
@@ -533,7 +550,7 @@
static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY; }
static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED; }
static inline int pte_file(pte_t pte) { return pte_val(pte) & _PAGE_FILE; }
-static inline int pte_special(pte_t pte) { return 0; }
+static inline int pte_special(pte_t pte) { return pte_val(pte) & _PAGE_SPECIAL; }
static inline void pte_uncache(pte_t pte) { pte_val(pte) |= _PAGE_NO_CACHE; }
static inline void pte_cache(pte_t pte) { pte_val(pte) &= ~_PAGE_NO_CACHE; }
@@ -552,10 +569,10 @@
static inline pte_t pte_mkyoung(pte_t pte) {
pte_val(pte) |= _PAGE_ACCESSED; return pte; }
static inline pte_t pte_mkspecial(pte_t pte) {
- return pte; }
-static inline unsigned long pte_pgprot(pte_t pte)
+ pte_val(pte) |= _PAGE_SPECIAL; return pte; }
+static inline pgprot_t pte_pgprot(pte_t pte)
{
- return __pgprot(pte_val(pte)) & PAGE_PROT_BITS;
+ return __pgprot(pte_val(pte) & PAGE_PROT_BITS);
}
static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
@@ -575,6 +592,10 @@
extern void add_hash_page(unsigned context, unsigned long va,
unsigned long pmdval);
+/* Flush an entry from the TLB/hash table */
+extern void flush_hash_entry(struct mm_struct *mm, pte_t *ptep,
+ unsigned long address);
+
/*
* Atomic PTE updates.
*
@@ -612,9 +633,6 @@
return old;
}
#else /* CONFIG_PTE_64BIT */
-/* TODO: Change that to only modify the low word and move set_pte_at()
- * out of line
- */
static inline unsigned long long pte_update(pte_t *p,
unsigned long clr,
unsigned long set)
@@ -652,14 +670,36 @@
* On machines which use an MMU hash table we avoid changing the
* _PAGE_HASHPTE bit.
*/
+
+static inline void __set_pte_at(struct mm_struct *mm, unsigned long addr,
+ pte_t *ptep, pte_t pte)
+{
+#if (_PAGE_HASHPTE != 0) && defined(CONFIG_SMP) && !defined(CONFIG_PTE_64BIT)
+ pte_update(ptep, ~_PAGE_HASHPTE, pte_val(pte) & ~_PAGE_HASHPTE);
+#elif defined(CONFIG_PTE_64BIT) && defined(CONFIG_SMP)
+#if _PAGE_HASHPTE != 0
+ if (pte_val(*ptep) & _PAGE_HASHPTE)
+ flush_hash_entry(mm, ptep, addr);
+#endif
+ __asm__ __volatile__("\
+ stw%U0%X0 %2,%0\n\
+ eieio\n\
+ stw%U0%X0 %L2,%1"
+ : "=m" (*ptep), "=m" (*((unsigned char *)ptep+4))
+ : "r" (pte) : "memory");
+#else
+ *ptep = __pte((pte_val(*ptep) & _PAGE_HASHPTE)
+ | (pte_val(pte) & ~_PAGE_HASHPTE));
+#endif
+}
+
static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
pte_t *ptep, pte_t pte)
{
-#if _PAGE_HASHPTE != 0
- pte_update(ptep, ~_PAGE_HASHPTE, pte_val(pte) & ~_PAGE_HASHPTE);
-#else
- *ptep = pte;
+#if defined(CONFIG_PTE_64BIT) && defined(CONFIG_SMP)
+ WARN_ON(pte_present(*ptep));
#endif
+ __set_pte_at(mm, addr, ptep, pte);
}
/*
diff --git a/arch/powerpc/include/asm/pgtable-ppc64.h b/arch/powerpc/include/asm/pgtable-ppc64.h
index 4597c49..4c0a8c6 100644
--- a/arch/powerpc/include/asm/pgtable-ppc64.h
+++ b/arch/powerpc/include/asm/pgtable-ppc64.h
@@ -117,10 +117,10 @@
#define PAGE_AGP __pgprot(_PAGE_BASE | _PAGE_WRENABLE | _PAGE_NO_CACHE)
#define HAVE_PAGE_AGP
-#define PAGE_PROT_BITS __pgprot(_PAGE_GUARDED | _PAGE_COHERENT | \
- _PAGE_NO_CACHE | _PAGE_WRITETHRU | \
- _PAGE_4K_PFN | _PAGE_RW | _PAGE_USER | \
- _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_EXEC)
+#define PAGE_PROT_BITS (_PAGE_GUARDED | _PAGE_COHERENT | \
+ _PAGE_NO_CACHE | _PAGE_WRITETHRU | \
+ _PAGE_4K_PFN | _PAGE_RW | _PAGE_USER | \
+ _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_EXEC)
/* PTEIDX nibble */
#define _PTEIDX_SECONDARY 0x8
#define _PTEIDX_GROUP_IX 0x7
@@ -264,9 +264,9 @@
return pte; }
static inline pte_t pte_mkspecial(pte_t pte) {
pte_val(pte) |= _PAGE_SPECIAL; return pte; }
-static inline unsigned long pte_pgprot(pte_t pte)
+static inline pgprot_t pte_pgprot(pte_t pte)
{
- return __pgprot(pte_val(pte)) & PAGE_PROT_BITS;
+ return __pgprot(pte_val(pte) & PAGE_PROT_BITS);
}
/* Atomic PTE updates */
diff --git a/arch/powerpc/include/asm/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h
index 0966899..c4a029c 100644
--- a/arch/powerpc/include/asm/ppc_asm.h
+++ b/arch/powerpc/include/asm/ppc_asm.h
@@ -268,7 +268,7 @@
* Loads the value of the constant expression 'expr' into register 'rn'
* using immediate instructions only. Use this when it's important not
* to reference other data (i.e. on ppc64 when the TOC pointer is not
- * valid).
+ * valid) and when 'expr' is a constant or absolute address.
*
* LOAD_REG_ADDR(rn, name)
* Loads the address of label 'name' into register 'rn'. Use this when
diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h
index be980f4..6745376 100644
--- a/arch/powerpc/include/asm/reg_booke.h
+++ b/arch/powerpc/include/asm/reg_booke.h
@@ -109,6 +109,7 @@
#define SPRN_EVPR 0x3D6 /* Exception Vector Prefix Register */
#define SPRN_L1CSR0 0x3F2 /* L1 Cache Control and Status Register 0 */
#define SPRN_L1CSR1 0x3F3 /* L1 Cache Control and Status Register 1 */
+#define SPRN_MMUCSR0 0x3F4 /* MMU Control and Status Register 0 */
#define SPRN_PIT 0x3DB /* Programmable Interval Timer */
#define SPRN_BUCSR 0x3F5 /* Branch Unit Control and Status */
#define SPRN_L2CSR0 0x3F9 /* L2 Data Cache Control and Status Register 0 */
@@ -410,6 +411,12 @@
#define L2CSR0_L2LOA 0x00000080 /* L2 Cache Lock Overflow Allocate */
#define L2CSR0_L2LO 0x00000020 /* L2 Cache Lock Overflow */
+/* Bit definitions for MMUCSR0 */
+#define MMUCSR0_TLB1FI 0x00000002 /* TLB1 Flash invalidate */
+#define MMUCSR0_TLB0FI 0x00000004 /* TLB0 Flash invalidate */
+#define MMUCSR0_TLB2FI 0x00000040 /* TLB2 Flash invalidate */
+#define MMUCSR0_TLB3FI 0x00000020 /* TLB3 Flash invalidate */
+
/* Bit definitions for SGR. */
#define SGR_NORMAL 0 /* Speculative fetching allowed. */
#define SGR_GUARDED 1 /* Speculative fetching disallowed. */
diff --git a/arch/powerpc/include/asm/sections.h b/arch/powerpc/include/asm/sections.h
index 07956f3..6fbce72 100644
--- a/arch/powerpc/include/asm/sections.h
+++ b/arch/powerpc/include/asm/sections.h
@@ -18,6 +18,12 @@
return 0;
}
+static inline int overlaps_kernel_text(unsigned long start, unsigned long end)
+{
+ return start < (unsigned long)__init_end &&
+ (unsigned long)_stext < end;
+}
+
#undef dereference_function_descriptor
static inline void *dereference_function_descriptor(void *ptr)
{
diff --git a/arch/powerpc/math-emu/sfp-machine.h b/arch/powerpc/include/asm/sfp-machine.h
similarity index 83%
rename from arch/powerpc/math-emu/sfp-machine.h
rename to arch/powerpc/include/asm/sfp-machine.h
index 4b17d83..ced34f1 100644
--- a/arch/powerpc/math-emu/sfp-machine.h
+++ b/arch/powerpc/include/asm/sfp-machine.h
@@ -79,27 +79,44 @@
* #define _FP_DIV_MEAT_D(R,X,Y) _FP_DIV_MEAT_2_udiv_64(D,R,X,Y)
*/
-#define _FP_MUL_MEAT_S(R,X,Y) _FP_MUL_MEAT_1_wide(S,R,X,Y,umul_ppmm)
-#define _FP_MUL_MEAT_D(R,X,Y) _FP_MUL_MEAT_2_wide(D,R,X,Y,umul_ppmm)
+#define _FP_MUL_MEAT_S(R,X,Y) _FP_MUL_MEAT_1_wide(_FP_WFRACBITS_S,R,X,Y,umul_ppmm)
+#define _FP_MUL_MEAT_D(R,X,Y) _FP_MUL_MEAT_2_wide(_FP_WFRACBITS_D,R,X,Y,umul_ppmm)
-#define _FP_DIV_MEAT_S(R,X,Y) _FP_DIV_MEAT_1_udiv(S,R,X,Y)
-#define _FP_DIV_MEAT_D(R,X,Y) _FP_DIV_MEAT_2_udiv_64(D,R,X,Y)
+#define _FP_DIV_MEAT_S(R,X,Y) _FP_DIV_MEAT_1_udiv(S,R,X,Y)
+#define _FP_DIV_MEAT_D(R,X,Y) _FP_DIV_MEAT_2_udiv(D,R,X,Y)
/* These macros define what NaN looks like. They're supposed to expand to
* a comma-separated set of 32bit unsigned ints that encode NaN.
*/
-#define _FP_NANFRAC_S _FP_QNANBIT_S
-#define _FP_NANFRAC_D _FP_QNANBIT_D, 0
-#define _FP_NANFRAC_Q _FP_QNANBIT_Q, 0, 0, 0
+#define _FP_NANFRAC_S ((_FP_QNANBIT_S << 1) - 1)
+#define _FP_NANFRAC_D ((_FP_QNANBIT_D << 1) - 1), -1
+#define _FP_NANFRAC_Q ((_FP_QNANBIT_Q << 1) - 1), -1, -1, -1
+#define _FP_NANSIGN_S 0
+#define _FP_NANSIGN_D 0
+#define _FP_NANSIGN_Q 0
#define _FP_KEEPNANFRACP 1
+/* Exception flags. We use the bit positions of the appropriate bits
+ in the FPSCR, which also correspond to the FE_* bits. This makes
+ everything easier ;-). */
+#define FP_EX_INVALID (1 << (31 - 2))
+#define FP_EX_INVALID_SNAN EFLAG_VXSNAN
+#define FP_EX_INVALID_ISI EFLAG_VXISI
+#define FP_EX_INVALID_IDI EFLAG_VXIDI
+#define FP_EX_INVALID_ZDZ EFLAG_VXZDZ
+#define FP_EX_INVALID_IMZ EFLAG_VXIMZ
+#define FP_EX_OVERFLOW (1 << (31 - 3))
+#define FP_EX_UNDERFLOW (1 << (31 - 4))
+#define FP_EX_DIVZERO (1 << (31 - 5))
+#define FP_EX_INEXACT (1 << (31 - 6))
+
/* This macro appears to be called when both X and Y are NaNs, and
* has to choose one and copy it to R. i386 goes for the larger of the
* two, sparc64 just picks Y. I don't understand this at all so I'll
* go with sparc64 because it's shorter :-> -- PMM
*/
-#define _FP_CHOOSENAN(fs, wc, R, X, Y) \
+#define _FP_CHOOSENAN(fs, wc, R, X, Y, OP) \
do { \
R##_s = Y##_s; \
_FP_FRAC_COPY_##wc(R,Y); \
@@ -107,62 +124,6 @@
} while (0)
-extern void fp_unpack_d(long *, unsigned long *, unsigned long *,
- long *, long *, void *);
-extern int fp_pack_d(void *, long, unsigned long, unsigned long, long, long);
-extern int fp_pack_ds(void *, long, unsigned long, unsigned long, long, long);
-
-#define __FP_UNPACK_RAW_1(fs, X, val) \
- do { \
- union _FP_UNION_##fs *_flo = \
- (union _FP_UNION_##fs *)val; \
- \
- X##_f = _flo->bits.frac; \
- X##_e = _flo->bits.exp; \
- X##_s = _flo->bits.sign; \
- } while (0)
-
-#define __FP_UNPACK_RAW_2(fs, X, val) \
- do { \
- union _FP_UNION_##fs *_flo = \
- (union _FP_UNION_##fs *)val; \
- \
- X##_f0 = _flo->bits.frac0; \
- X##_f1 = _flo->bits.frac1; \
- X##_e = _flo->bits.exp; \
- X##_s = _flo->bits.sign; \
- } while (0)
-
-#define __FP_UNPACK_S(X,val) \
- do { \
- __FP_UNPACK_RAW_1(S,X,val); \
- _FP_UNPACK_CANONICAL(S,1,X); \
- } while (0)
-
-#define __FP_UNPACK_D(X,val) \
- fp_unpack_d(&X##_s, &X##_f1, &X##_f0, &X##_e, &X##_c, val)
-
-#define __FP_PACK_RAW_1(fs, val, X) \
- do { \
- union _FP_UNION_##fs *_flo = \
- (union _FP_UNION_##fs *)val; \
- \
- _flo->bits.frac = X##_f; \
- _flo->bits.exp = X##_e; \
- _flo->bits.sign = X##_s; \
- } while (0)
-
-#define __FP_PACK_RAW_2(fs, val, X) \
- do { \
- union _FP_UNION_##fs *_flo = \
- (union _FP_UNION_##fs *)val; \
- \
- _flo->bits.frac0 = X##_f0; \
- _flo->bits.frac1 = X##_f1; \
- _flo->bits.exp = X##_e; \
- _flo->bits.sign = X##_s; \
- } while (0)
-
#include <linux/kernel.h>
#include <linux/sched.h>
@@ -182,15 +143,30 @@
#define __FP_PACK_S(val,X) \
({ int __exc = _FP_PACK_CANONICAL(S,1,X); \
if(!__exc || !__FPU_TRAP_P(__exc)) \
- __FP_PACK_RAW_1(S,val,X); \
+ _FP_PACK_RAW_1_P(S,val,X); \
__exc; \
})
#define __FP_PACK_D(val,X) \
- fp_pack_d(val, X##_s, X##_f1, X##_f0, X##_e, X##_c)
+ do { \
+ _FP_PACK_CANONICAL(D, 2, X); \
+ if (!FP_CUR_EXCEPTIONS || !__FPU_TRAP_P(FP_CUR_EXCEPTIONS)) \
+ _FP_PACK_RAW_2_P(D, val, X); \
+ } while (0)
-#define __FP_PACK_DS(val,X) \
- fp_pack_ds(val, X##_s, X##_f1, X##_f0, X##_e, X##_c)
+#define __FP_PACK_DS(val,X) \
+ do { \
+ FP_DECL_S(__X); \
+ FP_CONV(S, D, 1, 2, __X, X); \
+ _FP_PACK_CANONICAL(S, 1, __X); \
+ if (!FP_CUR_EXCEPTIONS || !__FPU_TRAP_P(FP_CUR_EXCEPTIONS)) { \
+ _FP_UNPACK_CANONICAL(S, 1, __X); \
+ FP_CONV(D, S, 2, 1, X, __X); \
+ _FP_PACK_CANONICAL(D, 2, X); \
+ if (!FP_CUR_EXCEPTIONS || !__FPU_TRAP_P(FP_CUR_EXCEPTIONS)) \
+ _FP_PACK_RAW_2_P(D, val, X); \
+ } \
+ } while (0)
/* Obtain the current rounding mode. */
#define FP_ROUNDMODE \
diff --git a/arch/powerpc/include/asm/smp.h b/arch/powerpc/include/asm/smp.h
index 4d28e1e..1866cec 100644
--- a/arch/powerpc/include/asm/smp.h
+++ b/arch/powerpc/include/asm/smp.h
@@ -56,9 +56,16 @@
#define raw_smp_processor_id() (current_thread_info()->cpu)
#define hard_smp_processor_id() (smp_hw_index[smp_processor_id()])
-#define get_hard_smp_processor_id(cpu) (smp_hw_index[(cpu)])
-#define set_hard_smp_processor_id(cpu, phys)\
- (smp_hw_index[(cpu)] = (phys))
+
+static inline int get_hard_smp_processor_id(int cpu)
+{
+ return smp_hw_index[cpu];
+}
+
+static inline void set_hard_smp_processor_id(int cpu, int phys)
+{
+ smp_hw_index[cpu] = phys;
+}
#endif
DECLARE_PER_CPU(cpumask_t, cpu_sibling_map);
@@ -86,15 +93,21 @@
#else
/* for UP */
-#define hard_smp_processor_id() 0
+#define hard_smp_processor_id() get_hard_smp_processor_id(0)
#define smp_setup_cpu_maps()
#endif /* CONFIG_SMP */
#ifdef CONFIG_PPC64
-#define get_hard_smp_processor_id(CPU) (paca[(CPU)].hw_cpu_id)
-#define set_hard_smp_processor_id(CPU, VAL) \
- do { (paca[(CPU)].hw_cpu_id = (VAL)); } while (0)
+static inline int get_hard_smp_processor_id(int cpu)
+{
+ return paca[cpu].hw_cpu_id;
+}
+
+static inline void set_hard_smp_processor_id(int cpu, int phys)
+{
+ paca[cpu].hw_cpu_id = phys;
+}
extern void smp_release_cpus(void);
@@ -102,10 +115,17 @@
/* 32-bit */
#ifndef CONFIG_SMP
extern int boot_cpuid_phys;
-#define get_hard_smp_processor_id(cpu) boot_cpuid_phys
-#define set_hard_smp_processor_id(cpu, phys)
-#endif
-#endif
+static inline int get_hard_smp_processor_id(int cpu)
+{
+ return boot_cpuid_phys;
+}
+
+static inline void set_hard_smp_processor_id(int cpu, int phys)
+{
+ boot_cpuid_phys = phys;
+}
+#endif /* !CONFIG_SMP */
+#endif /* !CONFIG_PPC64 */
extern int smt_enabled_at_boot;
diff --git a/arch/powerpc/include/asm/systbl.h b/arch/powerpc/include/asm/systbl.h
index f6cc7a4..803def23 100644
--- a/arch/powerpc/include/asm/systbl.h
+++ b/arch/powerpc/include/asm/systbl.h
@@ -32,7 +32,7 @@
COMPAT_SYS(ptrace)
SYSCALL_SPU(alarm)
OLDSYS(fstat)
-COMPAT_SYS(pause)
+SYSCALL(pause)
COMPAT_SYS(utime)
SYSCALL(ni_syscall)
SYSCALL(ni_syscall)
diff --git a/arch/powerpc/include/asm/tlbflush.h b/arch/powerpc/include/asm/tlbflush.h
index 361cd5c..a2c6bfd 100644
--- a/arch/powerpc/include/asm/tlbflush.h
+++ b/arch/powerpc/include/asm/tlbflush.h
@@ -29,6 +29,9 @@
#include <linux/mm.h>
extern void _tlbie(unsigned long address, unsigned int pid);
+extern void _tlbil_all(void);
+extern void _tlbil_pid(unsigned int pid);
+extern void _tlbil_va(unsigned long address, unsigned int pid);
#if defined(CONFIG_40x) || defined(CONFIG_8xx)
#define _tlbia() asm volatile ("tlbia; sync" : : : "memory")
@@ -38,31 +41,31 @@
static inline void flush_tlb_mm(struct mm_struct *mm)
{
- _tlbia();
+ _tlbil_pid(mm->context.id);
}
static inline void flush_tlb_page(struct vm_area_struct *vma,
unsigned long vmaddr)
{
- _tlbie(vmaddr, vma ? vma->vm_mm->context.id : 0);
+ _tlbil_va(vmaddr, vma ? vma->vm_mm->context.id : 0);
}
static inline void flush_tlb_page_nohash(struct vm_area_struct *vma,
unsigned long vmaddr)
{
- _tlbie(vmaddr, vma ? vma->vm_mm->context.id : 0);
+ flush_tlb_page(vma, vmaddr);
}
static inline void flush_tlb_range(struct vm_area_struct *vma,
unsigned long start, unsigned long end)
{
- _tlbia();
+ _tlbil_pid(vma->vm_mm->context.id);
}
static inline void flush_tlb_kernel_range(unsigned long start,
unsigned long end)
{
- _tlbia();
+ _tlbil_pid(0);
}
#elif defined(CONFIG_PPC32)
diff --git a/arch/powerpc/include/asm/types.h b/arch/powerpc/include/asm/types.h
index d3374bc..a9a9262 100644
--- a/arch/powerpc/include/asm/types.h
+++ b/arch/powerpc/include/asm/types.h
@@ -55,7 +55,7 @@
typedef u32 phys_addr_t;
#endif
-#ifdef __powerpc64__
+#if defined(__powerpc64__) || defined(CONFIG_PHYS_64BIT)
typedef u64 dma_addr_t;
#else
typedef u32 dma_addr_t;
diff --git a/arch/powerpc/kernel/.gitignore b/arch/powerpc/kernel/.gitignore
new file mode 100644
index 0000000..c5f676c
--- /dev/null
+++ b/arch/powerpc/kernel/.gitignore
@@ -0,0 +1 @@
+vmlinux.lds
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index 946daea..fdb5825 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -28,13 +28,14 @@
obj-y := cputable.o ptrace.o syscalls.o \
irq.o align.o signal_32.o pmc.o vdso.o \
init_task.o process.o systbl.o idle.o \
- signal.o
+ signal.o sysfs.o
obj-y += vdso32/
obj-$(CONFIG_PPC64) += setup_64.o sys_ppc32.o \
signal_64.o ptrace32.o \
paca.o cpu_setup_ppc970.o \
cpu_setup_pa6t.o \
- firmware.o sysfs.o nvram_64.o
+ firmware.o nvram_64.o
+obj64-$(CONFIG_RELOCATABLE) += reloc_64.o
obj-$(CONFIG_PPC64) += vdso64/
obj-$(CONFIG_ALTIVEC) += vecemu.o vector.o
obj-$(CONFIG_PPC_970_NAP) += idle_power4.o
@@ -69,10 +70,10 @@
extra-y += vmlinux.lds
obj-y += time.o prom.o traps.o setup-common.o \
- udbg.o misc.o io.o \
+ udbg.o misc.o io.o dma.o \
misc_$(CONFIG_WORD_SIZE).o
obj-$(CONFIG_PPC32) += entry_32.o setup_32.o
-obj-$(CONFIG_PPC64) += dma_64.o iommu.o
+obj-$(CONFIG_PPC64) += dma-iommu.o iommu.o
obj-$(CONFIG_KGDB) += kgdb.o
obj-$(CONFIG_PPC_MULTIPLATFORM) += prom_init.o
obj-$(CONFIG_MODULES) += ppc_ksyms.o
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index 92768d3..09febc5 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -122,6 +122,8 @@
DEFINE(PACASTABRR, offsetof(struct paca_struct, stab_rr));
DEFINE(PACAR1, offsetof(struct paca_struct, saved_r1));
DEFINE(PACATOC, offsetof(struct paca_struct, kernel_toc));
+ DEFINE(PACAKBASE, offsetof(struct paca_struct, kernelbase));
+ DEFINE(PACAKMSR, offsetof(struct paca_struct, kernel_msr));
DEFINE(PACASOFTIRQEN, offsetof(struct paca_struct, soft_enabled));
DEFINE(PACAHARDIRQEN, offsetof(struct paca_struct, hard_enabled));
DEFINE(PACASLBCACHE, offsetof(struct paca_struct, slb_cache));
@@ -350,6 +352,7 @@
#endif
DEFINE(PGD_TABLE_SIZE, PGD_TABLE_SIZE);
+ DEFINE(PTE_SIZE, sizeof(pte_t));
#ifdef CONFIG_KVM
DEFINE(TLBE_BYTES, sizeof(struct tlbe));
diff --git a/arch/powerpc/kernel/btext.c b/arch/powerpc/kernel/btext.c
index d8f0329..26e5863 100644
--- a/arch/powerpc/kernel/btext.c
+++ b/arch/powerpc/kernel/btext.c
@@ -442,28 +442,26 @@
void btext_drawhex(unsigned long v)
{
- char *hex_table = "0123456789abcdef";
-
if (!boot_text_mapped)
return;
#ifdef CONFIG_PPC64
- btext_drawchar(hex_table[(v >> 60) & 0x0000000FUL]);
- btext_drawchar(hex_table[(v >> 56) & 0x0000000FUL]);
- btext_drawchar(hex_table[(v >> 52) & 0x0000000FUL]);
- btext_drawchar(hex_table[(v >> 48) & 0x0000000FUL]);
- btext_drawchar(hex_table[(v >> 44) & 0x0000000FUL]);
- btext_drawchar(hex_table[(v >> 40) & 0x0000000FUL]);
- btext_drawchar(hex_table[(v >> 36) & 0x0000000FUL]);
- btext_drawchar(hex_table[(v >> 32) & 0x0000000FUL]);
+ btext_drawchar(hex_asc_hi(v >> 56));
+ btext_drawchar(hex_asc_lo(v >> 56));
+ btext_drawchar(hex_asc_hi(v >> 48));
+ btext_drawchar(hex_asc_lo(v >> 48));
+ btext_drawchar(hex_asc_hi(v >> 40));
+ btext_drawchar(hex_asc_lo(v >> 40));
+ btext_drawchar(hex_asc_hi(v >> 32));
+ btext_drawchar(hex_asc_lo(v >> 32));
#endif
- btext_drawchar(hex_table[(v >> 28) & 0x0000000FUL]);
- btext_drawchar(hex_table[(v >> 24) & 0x0000000FUL]);
- btext_drawchar(hex_table[(v >> 20) & 0x0000000FUL]);
- btext_drawchar(hex_table[(v >> 16) & 0x0000000FUL]);
- btext_drawchar(hex_table[(v >> 12) & 0x0000000FUL]);
- btext_drawchar(hex_table[(v >> 8) & 0x0000000FUL]);
- btext_drawchar(hex_table[(v >> 4) & 0x0000000FUL]);
- btext_drawchar(hex_table[(v >> 0) & 0x0000000FUL]);
+ btext_drawchar(hex_asc_hi(v >> 24));
+ btext_drawchar(hex_asc_lo(v >> 24));
+ btext_drawchar(hex_asc_hi(v >> 16));
+ btext_drawchar(hex_asc_lo(v >> 16));
+ btext_drawchar(hex_asc_hi(v >> 8));
+ btext_drawchar(hex_asc_lo(v >> 8));
+ btext_drawchar(hex_asc_hi(v));
+ btext_drawchar(hex_asc_lo(v));
btext_drawchar(' ');
}
diff --git a/arch/powerpc/kernel/cpu_setup_ppc970.S b/arch/powerpc/kernel/cpu_setup_ppc970.S
index bf118c3..27f2507 100644
--- a/arch/powerpc/kernel/cpu_setup_ppc970.S
+++ b/arch/powerpc/kernel/cpu_setup_ppc970.S
@@ -110,7 +110,7 @@
isync
/* Save away cpu state */
- LOAD_REG_IMMEDIATE(r5,cpu_state_storage)
+ LOAD_REG_ADDR(r5,cpu_state_storage)
/* Save HID0,1,4 and 5 */
mfspr r3,SPRN_HID0
@@ -134,7 +134,7 @@
rldicl. r0,r0,4,63
beqlr
- LOAD_REG_IMMEDIATE(r5,cpu_state_storage)
+ LOAD_REG_ADDR(r5,cpu_state_storage)
/* Before accessing memory, we make sure rm_ci is clear */
li r0,0
mfspr r3,SPRN_HID4
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 25c273c..e70d048 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -610,6 +610,7 @@
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 4,
+ .pmc_type = PPC_PMC_IBM,
.cpu_setup = __setup_cpu_750cx,
.machine_check = machine_check_generic,
.platform = "ppc750",
@@ -623,6 +624,7 @@
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 4,
+ .pmc_type = PPC_PMC_IBM,
.cpu_setup = __setup_cpu_750cx,
.machine_check = machine_check_generic,
.platform = "ppc750",
@@ -636,6 +638,7 @@
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 4,
+ .pmc_type = PPC_PMC_IBM,
.cpu_setup = __setup_cpu_750cx,
.machine_check = machine_check_generic,
.platform = "ppc750",
@@ -649,6 +652,7 @@
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 4,
+ .pmc_type = PPC_PMC_IBM,
.cpu_setup = __setup_cpu_750,
.machine_check = machine_check_generic,
.platform = "ppc750",
@@ -662,6 +666,7 @@
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 4,
+ .pmc_type = PPC_PMC_IBM,
.cpu_setup = __setup_cpu_750,
.machine_check = machine_check_generic,
.platform = "ppc750",
@@ -675,6 +680,7 @@
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 4,
+ .pmc_type = PPC_PMC_IBM,
.cpu_setup = __setup_cpu_750,
.machine_check = machine_check_generic,
.platform = "ppc750",
@@ -688,6 +694,7 @@
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 4,
+ .pmc_type = PPC_PMC_IBM,
.cpu_setup = __setup_cpu_750,
.machine_check = machine_check_generic,
.platform = "ppc750",
@@ -701,6 +708,7 @@
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 4,
+ .pmc_type = PPC_PMC_IBM,
.cpu_setup = __setup_cpu_750fx,
.machine_check = machine_check_generic,
.platform = "ppc750",
@@ -714,6 +722,7 @@
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 4,
+ .pmc_type = PPC_PMC_IBM,
.cpu_setup = __setup_cpu_750fx,
.machine_check = machine_check_generic,
.platform = "ppc750",
@@ -727,6 +736,7 @@
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 4,
+ .pmc_type = PPC_PMC_IBM,
.cpu_setup = __setup_cpu_750,
.machine_check = machine_check_generic,
.platform = "ppc750",
@@ -741,6 +751,7 @@
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 4,
+ .pmc_type = PPC_PMC_G4,
.cpu_setup = __setup_cpu_7400,
.machine_check = machine_check_generic,
.platform = "ppc7400",
@@ -755,6 +766,7 @@
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 4,
+ .pmc_type = PPC_PMC_G4,
.cpu_setup = __setup_cpu_7400,
.machine_check = machine_check_generic,
.platform = "ppc7400",
@@ -769,6 +781,7 @@
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 4,
+ .pmc_type = PPC_PMC_G4,
.cpu_setup = __setup_cpu_7410,
.machine_check = machine_check_generic,
.platform = "ppc7400",
@@ -783,6 +796,7 @@
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 6,
+ .pmc_type = PPC_PMC_G4,
.cpu_setup = __setup_cpu_745x,
.oprofile_cpu_type = "ppc/7450",
.oprofile_type = PPC_OPROFILE_G4,
@@ -799,6 +813,7 @@
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 6,
+ .pmc_type = PPC_PMC_G4,
.cpu_setup = __setup_cpu_745x,
.oprofile_cpu_type = "ppc/7450",
.oprofile_type = PPC_OPROFILE_G4,
@@ -815,6 +830,7 @@
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 6,
+ .pmc_type = PPC_PMC_G4,
.cpu_setup = __setup_cpu_745x,
.oprofile_cpu_type = "ppc/7450",
.oprofile_type = PPC_OPROFILE_G4,
@@ -831,6 +847,7 @@
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 6,
+ .pmc_type = PPC_PMC_G4,
.cpu_setup = __setup_cpu_745x,
.oprofile_cpu_type = "ppc/7450",
.oprofile_type = PPC_OPROFILE_G4,
@@ -847,6 +864,7 @@
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 6,
+ .pmc_type = PPC_PMC_G4,
.cpu_setup = __setup_cpu_745x,
.oprofile_cpu_type = "ppc/7450",
.oprofile_type = PPC_OPROFILE_G4,
@@ -863,6 +881,7 @@
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 6,
+ .pmc_type = PPC_PMC_G4,
.cpu_setup = __setup_cpu_745x,
.oprofile_cpu_type = "ppc/7450",
.oprofile_type = PPC_OPROFILE_G4,
@@ -879,6 +898,7 @@
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 6,
+ .pmc_type = PPC_PMC_G4,
.cpu_setup = __setup_cpu_745x,
.oprofile_cpu_type = "ppc/7450",
.oprofile_type = PPC_OPROFILE_G4,
@@ -895,6 +915,7 @@
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 6,
+ .pmc_type = PPC_PMC_G4,
.cpu_setup = __setup_cpu_745x,
.oprofile_cpu_type = "ppc/7450",
.oprofile_type = PPC_OPROFILE_G4,
@@ -910,6 +931,7 @@
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 6,
+ .pmc_type = PPC_PMC_G4,
.cpu_setup = __setup_cpu_745x,
.oprofile_cpu_type = "ppc/7450",
.oprofile_type = PPC_OPROFILE_G4,
@@ -926,6 +948,7 @@
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 6,
+ .pmc_type = PPC_PMC_G4,
.cpu_setup = __setup_cpu_745x,
.oprofile_cpu_type = "ppc/7450",
.oprofile_type = PPC_OPROFILE_G4,
@@ -942,6 +965,7 @@
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 6,
+ .pmc_type = PPC_PMC_G4,
.cpu_setup = __setup_cpu_745x,
.oprofile_cpu_type = "ppc/7450",
.oprofile_type = PPC_OPROFILE_G4,
diff --git a/arch/powerpc/kernel/dma-iommu.c b/arch/powerpc/kernel/dma-iommu.c
new file mode 100644
index 0000000..49248f8
--- /dev/null
+++ b/arch/powerpc/kernel/dma-iommu.c
@@ -0,0 +1,103 @@
+/*
+ * Copyright (C) 2006 Benjamin Herrenschmidt, IBM Corporation
+ *
+ * Provide default implementations of the DMA mapping callbacks for
+ * busses using the iommu infrastructure
+ */
+
+#include <asm/iommu.h>
+
+/*
+ * Generic iommu implementation
+ */
+
+/* Allocates a contiguous real buffer and creates mappings over it.
+ * Returns the virtual address of the buffer and sets dma_handle
+ * to the dma address (mapping) of the first page.
+ */
+static void *dma_iommu_alloc_coherent(struct device *dev, size_t size,
+ dma_addr_t *dma_handle, gfp_t flag)
+{
+ return iommu_alloc_coherent(dev, dev->archdata.dma_data, size,
+ dma_handle, device_to_mask(dev), flag,
+ dev_to_node(dev));
+}
+
+static void dma_iommu_free_coherent(struct device *dev, size_t size,
+ void *vaddr, dma_addr_t dma_handle)
+{
+ iommu_free_coherent(dev->archdata.dma_data, size, vaddr, dma_handle);
+}
+
+/* Creates TCEs for a user provided buffer. The user buffer must be
+ * contiguous real kernel storage (not vmalloc). The address of the buffer
+ * passed here is the kernel (virtual) address of the buffer. The buffer
+ * need not be page aligned, the dma_addr_t returned will point to the same
+ * byte within the page as vaddr.
+ */
+static dma_addr_t dma_iommu_map_single(struct device *dev, void *vaddr,
+ size_t size,
+ enum dma_data_direction direction,
+ struct dma_attrs *attrs)
+{
+ return iommu_map_single(dev, dev->archdata.dma_data, vaddr, size,
+ device_to_mask(dev), direction, attrs);
+}
+
+
+static void dma_iommu_unmap_single(struct device *dev, dma_addr_t dma_handle,
+ size_t size,
+ enum dma_data_direction direction,
+ struct dma_attrs *attrs)
+{
+ iommu_unmap_single(dev->archdata.dma_data, dma_handle, size, direction,
+ attrs);
+}
+
+
+static int dma_iommu_map_sg(struct device *dev, struct scatterlist *sglist,
+ int nelems, enum dma_data_direction direction,
+ struct dma_attrs *attrs)
+{
+ return iommu_map_sg(dev, dev->archdata.dma_data, sglist, nelems,
+ device_to_mask(dev), direction, attrs);
+}
+
+static void dma_iommu_unmap_sg(struct device *dev, struct scatterlist *sglist,
+ int nelems, enum dma_data_direction direction,
+ struct dma_attrs *attrs)
+{
+ iommu_unmap_sg(dev->archdata.dma_data, sglist, nelems, direction,
+ attrs);
+}
+
+/* We support DMA to/from any memory page via the iommu */
+static int dma_iommu_dma_supported(struct device *dev, u64 mask)
+{
+ struct iommu_table *tbl = dev->archdata.dma_data;
+
+ if (!tbl || tbl->it_offset > mask) {
+ printk(KERN_INFO
+ "Warning: IOMMU offset too big for device mask\n");
+ if (tbl)
+ printk(KERN_INFO
+ "mask: 0x%08lx, table offset: 0x%08lx\n",
+ mask, tbl->it_offset);
+ else
+ printk(KERN_INFO "mask: 0x%08lx, table unavailable\n",
+ mask);
+ return 0;
+ } else
+ return 1;
+}
+
+struct dma_mapping_ops dma_iommu_ops = {
+ .alloc_coherent = dma_iommu_alloc_coherent,
+ .free_coherent = dma_iommu_free_coherent,
+ .map_single = dma_iommu_map_single,
+ .unmap_single = dma_iommu_unmap_single,
+ .map_sg = dma_iommu_map_sg,
+ .unmap_sg = dma_iommu_unmap_sg,
+ .dma_supported = dma_iommu_dma_supported,
+};
+EXPORT_SYMBOL(dma_iommu_ops);
diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c
new file mode 100644
index 0000000..1562daf
--- /dev/null
+++ b/arch/powerpc/kernel/dma.c
@@ -0,0 +1,131 @@
+/*
+ * Copyright (C) 2006 Benjamin Herrenschmidt, IBM Corporation
+ *
+ * Provide default implementations of the DMA mapping callbacks for
+ * directly mapped busses.
+ */
+
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <asm/bug.h>
+#include <asm/abs_addr.h>
+
+/*
+ * Generic direct DMA implementation
+ *
+ * This implementation supports a per-device offset that can be applied if
+ * the address at which memory is visible to devices is not 0. Platform code
+ * can set archdata.dma_data to an unsigned long holding the offset. By
+ * default the offset is PCI_DRAM_OFFSET.
+ */
+
+static unsigned long get_dma_direct_offset(struct device *dev)
+{
+ if (dev)
+ return (unsigned long)dev->archdata.dma_data;
+
+ return PCI_DRAM_OFFSET;
+}
+
+void *dma_direct_alloc_coherent(struct device *dev, size_t size,
+ dma_addr_t *dma_handle, gfp_t flag)
+{
+ void *ret;
+#ifdef CONFIG_NOT_COHERENT_CACHE
+ ret = __dma_alloc_coherent(size, dma_handle, flag);
+ if (ret == NULL)
+ return NULL;
+ *dma_handle += get_dma_direct_offset(dev);
+ return ret;
+#else
+ struct page *page;
+ int node = dev_to_node(dev);
+
+ /* ignore region specifiers */
+ flag &= ~(__GFP_HIGHMEM);
+
+ page = alloc_pages_node(node, flag, get_order(size));
+ if (page == NULL)
+ return NULL;
+ ret = page_address(page);
+ memset(ret, 0, size);
+ *dma_handle = virt_to_abs(ret) + get_dma_direct_offset(dev);
+
+ return ret;
+#endif
+}
+
+void dma_direct_free_coherent(struct device *dev, size_t size,
+ void *vaddr, dma_addr_t dma_handle)
+{
+#ifdef CONFIG_NOT_COHERENT_CACHE
+ __dma_free_coherent(size, vaddr);
+#else
+ free_pages((unsigned long)vaddr, get_order(size));
+#endif
+}
+
+static int dma_direct_map_sg(struct device *dev, struct scatterlist *sgl,
+ int nents, enum dma_data_direction direction,
+ struct dma_attrs *attrs)
+{
+ struct scatterlist *sg;
+ int i;
+
+ for_each_sg(sgl, sg, nents, i) {
+ sg->dma_address = sg_phys(sg) + get_dma_direct_offset(dev);
+ sg->dma_length = sg->length;
+ }
+
+ return nents;
+}
+
+static void dma_direct_unmap_sg(struct device *dev, struct scatterlist *sg,
+ int nents, enum dma_data_direction direction,
+ struct dma_attrs *attrs)
+{
+}
+
+static int dma_direct_dma_supported(struct device *dev, u64 mask)
+{
+#ifdef CONFIG_PPC64
+ /* Could be improved to check for memory though it better be
+ * done via some global so platforms can set the limit in case
+ * they have limited DMA windows
+ */
+ return mask >= DMA_32BIT_MASK;
+#else
+ return 1;
+#endif
+}
+
+static inline dma_addr_t dma_direct_map_page(struct device *dev,
+ struct page *page,
+ unsigned long offset,
+ size_t size,
+ enum dma_data_direction dir,
+ struct dma_attrs *attrs)
+{
+ BUG_ON(dir == DMA_NONE);
+ __dma_sync_page(page, offset, size, dir);
+ return page_to_phys(page) + offset + get_dma_direct_offset(dev);
+}
+
+static inline void dma_direct_unmap_page(struct device *dev,
+ dma_addr_t dma_address,
+ size_t size,
+ enum dma_data_direction direction,
+ struct dma_attrs *attrs)
+{
+}
+
+struct dma_mapping_ops dma_direct_ops = {
+ .alloc_coherent = dma_direct_alloc_coherent,
+ .free_coherent = dma_direct_free_coherent,
+ .map_sg = dma_direct_map_sg,
+ .unmap_sg = dma_direct_unmap_sg,
+ .dma_supported = dma_direct_dma_supported,
+ .map_page = dma_direct_map_page,
+ .unmap_page = dma_direct_unmap_page,
+};
+EXPORT_SYMBOL(dma_direct_ops);
diff --git a/arch/powerpc/kernel/dma_64.c b/arch/powerpc/kernel/dma_64.c
deleted file mode 100644
index ae5708e..0000000
--- a/arch/powerpc/kernel/dma_64.c
+++ /dev/null
@@ -1,200 +0,0 @@
-/*
- * Copyright (C) 2006 Benjamin Herrenschmidt, IBM Corporation
- *
- * Provide default implementations of the DMA mapping callbacks for
- * directly mapped busses and busses using the iommu infrastructure
- */
-
-#include <linux/device.h>
-#include <linux/dma-mapping.h>
-#include <asm/bug.h>
-#include <asm/iommu.h>
-#include <asm/abs_addr.h>
-
-/*
- * Generic iommu implementation
- */
-
-/* Allocates a contiguous real buffer and creates mappings over it.
- * Returns the virtual address of the buffer and sets dma_handle
- * to the dma address (mapping) of the first page.
- */
-static void *dma_iommu_alloc_coherent(struct device *dev, size_t size,
- dma_addr_t *dma_handle, gfp_t flag)
-{
- return iommu_alloc_coherent(dev, dev->archdata.dma_data, size,
- dma_handle, device_to_mask(dev), flag,
- dev->archdata.numa_node);
-}
-
-static void dma_iommu_free_coherent(struct device *dev, size_t size,
- void *vaddr, dma_addr_t dma_handle)
-{
- iommu_free_coherent(dev->archdata.dma_data, size, vaddr, dma_handle);
-}
-
-/* Creates TCEs for a user provided buffer. The user buffer must be
- * contiguous real kernel storage (not vmalloc). The address of the buffer
- * passed here is the kernel (virtual) address of the buffer. The buffer
- * need not be page aligned, the dma_addr_t returned will point to the same
- * byte within the page as vaddr.
- */
-static dma_addr_t dma_iommu_map_single(struct device *dev, void *vaddr,
- size_t size,
- enum dma_data_direction direction,
- struct dma_attrs *attrs)
-{
- return iommu_map_single(dev, dev->archdata.dma_data, vaddr, size,
- device_to_mask(dev), direction, attrs);
-}
-
-
-static void dma_iommu_unmap_single(struct device *dev, dma_addr_t dma_handle,
- size_t size,
- enum dma_data_direction direction,
- struct dma_attrs *attrs)
-{
- iommu_unmap_single(dev->archdata.dma_data, dma_handle, size, direction,
- attrs);
-}
-
-
-static int dma_iommu_map_sg(struct device *dev, struct scatterlist *sglist,
- int nelems, enum dma_data_direction direction,
- struct dma_attrs *attrs)
-{
- return iommu_map_sg(dev, dev->archdata.dma_data, sglist, nelems,
- device_to_mask(dev), direction, attrs);
-}
-
-static void dma_iommu_unmap_sg(struct device *dev, struct scatterlist *sglist,
- int nelems, enum dma_data_direction direction,
- struct dma_attrs *attrs)
-{
- iommu_unmap_sg(dev->archdata.dma_data, sglist, nelems, direction,
- attrs);
-}
-
-/* We support DMA to/from any memory page via the iommu */
-static int dma_iommu_dma_supported(struct device *dev, u64 mask)
-{
- struct iommu_table *tbl = dev->archdata.dma_data;
-
- if (!tbl || tbl->it_offset > mask) {
- printk(KERN_INFO
- "Warning: IOMMU offset too big for device mask\n");
- if (tbl)
- printk(KERN_INFO
- "mask: 0x%08lx, table offset: 0x%08lx\n",
- mask, tbl->it_offset);
- else
- printk(KERN_INFO "mask: 0x%08lx, table unavailable\n",
- mask);
- return 0;
- } else
- return 1;
-}
-
-struct dma_mapping_ops dma_iommu_ops = {
- .alloc_coherent = dma_iommu_alloc_coherent,
- .free_coherent = dma_iommu_free_coherent,
- .map_single = dma_iommu_map_single,
- .unmap_single = dma_iommu_unmap_single,
- .map_sg = dma_iommu_map_sg,
- .unmap_sg = dma_iommu_unmap_sg,
- .dma_supported = dma_iommu_dma_supported,
-};
-EXPORT_SYMBOL(dma_iommu_ops);
-
-/*
- * Generic direct DMA implementation
- *
- * This implementation supports a per-device offset that can be applied if
- * the address at which memory is visible to devices is not 0. Platform code
- * can set archdata.dma_data to an unsigned long holding the offset. By
- * default the offset is zero.
- */
-
-static unsigned long get_dma_direct_offset(struct device *dev)
-{
- return (unsigned long)dev->archdata.dma_data;
-}
-
-static void *dma_direct_alloc_coherent(struct device *dev, size_t size,
- dma_addr_t *dma_handle, gfp_t flag)
-{
- struct page *page;
- void *ret;
- int node = dev->archdata.numa_node;
-
- page = alloc_pages_node(node, flag, get_order(size));
- if (page == NULL)
- return NULL;
- ret = page_address(page);
- memset(ret, 0, size);
- *dma_handle = virt_to_abs(ret) + get_dma_direct_offset(dev);
-
- return ret;
-}
-
-static void dma_direct_free_coherent(struct device *dev, size_t size,
- void *vaddr, dma_addr_t dma_handle)
-{
- free_pages((unsigned long)vaddr, get_order(size));
-}
-
-static dma_addr_t dma_direct_map_single(struct device *dev, void *ptr,
- size_t size,
- enum dma_data_direction direction,
- struct dma_attrs *attrs)
-{
- return virt_to_abs(ptr) + get_dma_direct_offset(dev);
-}
-
-static void dma_direct_unmap_single(struct device *dev, dma_addr_t dma_addr,
- size_t size,
- enum dma_data_direction direction,
- struct dma_attrs *attrs)
-{
-}
-
-static int dma_direct_map_sg(struct device *dev, struct scatterlist *sgl,
- int nents, enum dma_data_direction direction,
- struct dma_attrs *attrs)
-{
- struct scatterlist *sg;
- int i;
-
- for_each_sg(sgl, sg, nents, i) {
- sg->dma_address = sg_phys(sg) + get_dma_direct_offset(dev);
- sg->dma_length = sg->length;
- }
-
- return nents;
-}
-
-static void dma_direct_unmap_sg(struct device *dev, struct scatterlist *sg,
- int nents, enum dma_data_direction direction,
- struct dma_attrs *attrs)
-{
-}
-
-static int dma_direct_dma_supported(struct device *dev, u64 mask)
-{
- /* Could be improved to check for memory though it better be
- * done via some global so platforms can set the limit in case
- * they have limited DMA windows
- */
- return mask >= DMA_32BIT_MASK;
-}
-
-struct dma_mapping_ops dma_direct_ops = {
- .alloc_coherent = dma_direct_alloc_coherent,
- .free_coherent = dma_direct_free_coherent,
- .map_single = dma_direct_map_single,
- .unmap_single = dma_direct_unmap_single,
- .map_sg = dma_direct_map_sg,
- .unmap_sg = dma_direct_unmap_sg,
- .dma_supported = dma_direct_dma_supported,
-};
-EXPORT_SYMBOL(dma_direct_ops);
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index 2d802e9..fd8b4ba 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -512,31 +512,12 @@
#endif
restore:
- ld r5,SOFTE(r1)
-#ifdef CONFIG_PPC_ISERIES
BEGIN_FW_FTR_SECTION
- cmpdi 0,r5,0
- beq 4f
- /* Check for pending interrupts (iSeries) */
- ld r3,PACALPPACAPTR(r13)
- ld r3,LPPACAANYINT(r3)
- cmpdi r3,0
- beq+ 4f /* skip do_IRQ if no interrupts */
-
- li r3,0
- stb r3,PACASOFTIRQEN(r13) /* ensure we are soft-disabled */
-#ifdef CONFIG_TRACE_IRQFLAGS
- bl .trace_hardirqs_off
- mfmsr r10
-#endif
- ori r10,r10,MSR_EE
- mtmsrd r10 /* hard-enable again */
- addi r3,r1,STACK_FRAME_OVERHEAD
- bl .do_IRQ
- b .ret_from_except_lite /* loop back and handle more */
-4:
-END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
-#endif
+ ld r5,SOFTE(r1)
+FW_FTR_SECTION_ELSE
+ b iseries_check_pending_irqs
+ALT_FW_FTR_SECTION_END_IFCLR(FW_FEATURE_ISERIES)
+2:
TRACE_AND_RESTORE_IRQ(r5);
/* extract EE bit and use it to restore paca->hard_enabled */
@@ -592,6 +573,30 @@
rfid
b . /* prevent speculative execution */
+iseries_check_pending_irqs:
+#ifdef CONFIG_PPC_ISERIES
+ ld r5,SOFTE(r1)
+ cmpdi 0,r5,0
+ beq 2b
+ /* Check for pending interrupts (iSeries) */
+ ld r3,PACALPPACAPTR(r13)
+ ld r3,LPPACAANYINT(r3)
+ cmpdi r3,0
+ beq+ 2b /* skip do_IRQ if no interrupts */
+
+ li r3,0
+ stb r3,PACASOFTIRQEN(r13) /* ensure we are soft-disabled */
+#ifdef CONFIG_TRACE_IRQFLAGS
+ bl .trace_hardirqs_off
+ mfmsr r10
+#endif
+ ori r10,r10,MSR_EE
+ mtmsrd r10 /* hard-enable again */
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl .do_IRQ
+ b .ret_from_except_lite /* loop back and handle more */
+#endif
+
do_work:
#ifdef CONFIG_PREEMPT
andi. r0,r3,MSR_PR /* Returning to user mode? */
@@ -685,10 +690,6 @@
std r7,_DAR(r1)
mfdsisr r8
std r8,_DSISR(r1)
- mfsrr0 r9
- std r9,_SRR0(r1)
- mfsrr1 r10
- std r10,_SRR1(r1)
/* Temporary workaround to clear CR until RTAS can be modified to
* ignore all bits.
@@ -749,6 +750,10 @@
mfspr r4,SPRN_SPRG3 /* Get PACA */
clrldi r4,r4,2 /* convert to realmode address */
+ bcl 20,31,$+4
+0: mflr r3
+ ld r3,(1f-0b)(r3) /* get &.rtas_restore_regs */
+
mfmsr r6
li r0,MSR_RI
andc r6,r6,r0
@@ -756,7 +761,6 @@
mtmsrd r6
ld r1,PACAR1(r4) /* Restore our SP */
- LOAD_REG_IMMEDIATE(r3,.rtas_restore_regs)
ld r4,PACASAVEDMSR(r4) /* Restore our MSR */
mtspr SPRN_SRR0,r3
@@ -764,6 +768,9 @@
rfid
b . /* prevent speculative execution */
+ .align 3
+1: .llong .rtas_restore_regs
+
_STATIC(rtas_restore_regs)
/* relocation is on at this point */
REST_GPR(2, r1) /* Restore the TOC */
@@ -783,10 +790,6 @@
mtdar r7
ld r8,_DSISR(r1)
mtdsisr r8
- ld r9,_SRR0(r1)
- mtsrr0 r9
- ld r10,_SRR1(r1)
- mtsrr1 r10
addi r1,r1,RTAS_FRAME_SIZE /* Unstack our frame */
ld r0,16(r1) /* get return address */
diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S
index 8bb6575..0c32682 100644
--- a/arch/powerpc/kernel/head_32.S
+++ b/arch/powerpc/kernel/head_32.S
@@ -110,6 +110,12 @@
#ifdef CONFIG_PPC_MULTIPLATFORM
cmpwi 0,r5,0
beq 1f
+
+ /* find out where we are now */
+ bcl 20,31,$+4
+0: mflr r8 /* r8 = runtime addr here */
+ addis r8,r8,(_stext - 0b)@ha
+ addi r8,r8,(_stext - 0b)@l /* current runtime base addr */
bl prom_init
trap
#endif
@@ -369,13 +375,13 @@
DataAccess:
EXCEPTION_PROLOG
mfspr r10,SPRN_DSISR
+ stw r10,_DSISR(r11)
andis. r0,r10,0xa470 /* weird error? */
bne 1f /* if not, try to put a PTE */
mfspr r4,SPRN_DAR /* into the hash table */
rlwinm r3,r10,32-15,21,21 /* DSISR_STORE -> _PAGE_RW */
bl hash_page
-1: stw r10,_DSISR(r11)
- mr r5,r10
+1: lwz r5,_DSISR(r11) /* get DSISR value */
mfspr r4,SPRN_DAR
EXC_XFER_EE_LITE(0x300, handle_page_fault)
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index cc8fb47..84856be 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -82,7 +82,11 @@
/* Catch branch to 0 in real mode */
trap
- /* Secondary processors spin on this value until it goes to 1. */
+ /* Secondary processors spin on this value until it becomes nonzero.
+ * When it does it contains the real address of the descriptor
+ * of the function that the cpu should jump to to continue
+ * initialization.
+ */
.globl __secondary_hold_spinloop
__secondary_hold_spinloop:
.llong 0x0
@@ -109,8 +113,11 @@
* before the bulk of the kernel has been relocated. This code
* is relocated to physical address 0x60 before prom_init is run.
* All of it must fit below the first exception vector at 0x100.
+ * Use .globl here not _GLOBAL because we want __secondary_hold
+ * to be the actual text address, not a descriptor.
*/
-_GLOBAL(__secondary_hold)
+ .globl __secondary_hold
+__secondary_hold:
mfmsr r24
ori r24,r24,MSR_RI
mtmsrd r24 /* RI on */
@@ -121,16 +128,16 @@
/* Tell the master cpu we're here */
/* Relocation is off & we are located at an address less */
/* than 0x100, so only need to grab low order offset. */
- std r24,__secondary_hold_acknowledge@l(0)
+ std r24,__secondary_hold_acknowledge-_stext(0)
sync
/* All secondary cpus wait here until told to start. */
-100: ld r4,__secondary_hold_spinloop@l(0)
- cmpdi 0,r4,1
- bne 100b
+100: ld r4,__secondary_hold_spinloop-_stext(0)
+ cmpdi 0,r4,0
+ beq 100b
#if defined(CONFIG_SMP) || defined(CONFIG_KEXEC)
- LOAD_REG_IMMEDIATE(r4, .generic_secondary_smp_init)
+ ld r4,0(r4) /* deref function descriptor */
mtctr r4
mr r3,r24
bctr
@@ -147,6 +154,10 @@
/*
* This is the start of the interrupt handlers for pSeries
* This code runs with relocation off.
+ * Code from here to __end_interrupts gets copied down to real
+ * address 0x100 when we are running a relocatable kernel.
+ * Therefore any relative branches in this section must only
+ * branch to labels in this section.
*/
. = 0x100
.globl __start_interrupts
@@ -200,7 +211,20 @@
mfspr r10,SPRN_SPRG1
std r10,PACA_EXSLB+EX_R13(r13)
mfspr r12,SPRN_SRR1 /* and SRR1 */
- b .slb_miss_realmode /* Rel. branch works in real mode */
+#ifndef CONFIG_RELOCATABLE
+ b .slb_miss_realmode
+#else
+ /*
+ * We can't just use a direct branch to .slb_miss_realmode
+ * because the distance from here to there depends on where
+ * the kernel ends up being put.
+ */
+ mfctr r11
+ ld r10,PACAKBASE(r13)
+ LOAD_HANDLER(r10, .slb_miss_realmode)
+ mtctr r10
+ bctr
+#endif
STD_EXCEPTION_PSERIES(0x400, instruction_access)
@@ -225,7 +249,15 @@
mfspr r10,SPRN_SPRG1
std r10,PACA_EXSLB+EX_R13(r13)
mfspr r12,SPRN_SRR1 /* and SRR1 */
- b .slb_miss_realmode /* Rel. branch works in real mode */
+#ifndef CONFIG_RELOCATABLE
+ b .slb_miss_realmode
+#else
+ mfctr r11
+ ld r10,PACAKBASE(r13)
+ LOAD_HANDLER(r10, .slb_miss_realmode)
+ mtctr r10
+ bctr
+#endif
MASKABLE_EXCEPTION_PSERIES(0x500, hardware_interrupt)
STD_EXCEPTION_PSERIES(0x600, alignment)
@@ -244,14 +276,12 @@
beq- 1f
END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE)
mr r9,r13
- mfmsr r10
mfspr r13,SPRN_SPRG3
mfspr r11,SPRN_SRR0
- clrrdi r12,r13,32
- oris r12,r12,system_call_common@h
- ori r12,r12,system_call_common@l
+ ld r12,PACAKBASE(r13)
+ ld r10,PACAKMSR(r13)
+ LOAD_HANDLER(r12, system_call_entry)
mtspr SPRN_SRR0,r12
- ori r10,r10,MSR_IR|MSR_DR|MSR_RI
mfspr r12,SPRN_SRR1
mtspr SPRN_SRR1,r10
rfid
@@ -325,16 +355,32 @@
mfspr r12,SPRN_SPRG2
EXCEPTION_PROLOG_PSERIES(PACA_EXSLB, .do_stab_bolted)
+#ifdef CONFIG_PPC_PSERIES
/*
- * We have some room here we use that to put
- * the peries slb miss user trampoline code so it's reasonably
- * away from slb_miss_user_common to avoid problems with rfid
- *
+ * Vectors for the FWNMI option. Share common code.
+ */
+ .globl system_reset_fwnmi
+ .align 7
+system_reset_fwnmi:
+ HMT_MEDIUM
+ mtspr SPRN_SPRG1,r13 /* save r13 */
+ EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common)
+
+ .globl machine_check_fwnmi
+ .align 7
+machine_check_fwnmi:
+ HMT_MEDIUM
+ mtspr SPRN_SPRG1,r13 /* save r13 */
+ EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common)
+
+#endif /* CONFIG_PPC_PSERIES */
+
+#ifdef __DISABLED__
+/*
* This is used for when the SLB miss handler has to go virtual,
* which doesn't happen for now anymore but will once we re-implement
* dynamic VSIDs for shared page tables
*/
-#ifdef __DISABLED__
slb_miss_user_pseries:
std r10,PACA_EXGEN+EX_R10(r13)
std r11,PACA_EXGEN+EX_R11(r13)
@@ -357,25 +403,17 @@
b . /* prevent spec. execution */
#endif /* __DISABLED__ */
-#ifdef CONFIG_PPC_PSERIES
+ .align 7
+ .globl __end_interrupts
+__end_interrupts:
+
/*
- * Vectors for the FWNMI option. Share common code.
+ * Code from here down to __end_handlers is invoked from the
+ * exception prologs above. Because the prologs assemble the
+ * addresses of these handlers using the LOAD_HANDLER macro,
+ * which uses an addi instruction, these handlers must be in
+ * the first 32k of the kernel image.
*/
- .globl system_reset_fwnmi
- .align 7
-system_reset_fwnmi:
- HMT_MEDIUM
- mtspr SPRN_SPRG1,r13 /* save r13 */
- EXCEPTION_PROLOG_PSERIES_FORCE_64BIT(PACA_EXGEN, system_reset_common)
-
- .globl machine_check_fwnmi
- .align 7
-machine_check_fwnmi:
- HMT_MEDIUM
- mtspr SPRN_SPRG1,r13 /* save r13 */
- EXCEPTION_PROLOG_PSERIES_FORCE_64BIT(PACA_EXMC, machine_check_common)
-
-#endif /* CONFIG_PPC_PSERIES */
/*** Common interrupt handlers ***/
@@ -414,6 +452,10 @@
STD_EXCEPTION_COMMON(0x1800, cbe_thermal, .cbe_thermal_exception)
#endif /* CONFIG_CBE_RAS */
+ .align 7
+system_call_entry:
+ b system_call_common
+
/*
* Here we have detected that the kernel stack pointer is bad.
* R9 contains the saved CR, r13 points to the paca,
@@ -457,65 +499,6 @@
b 1b
/*
- * Return from an exception with minimal checks.
- * The caller is assumed to have done EXCEPTION_PROLOG_COMMON.
- * If interrupts have been enabled, or anything has been
- * done that might have changed the scheduling status of
- * any task or sent any task a signal, you should use
- * ret_from_except or ret_from_except_lite instead of this.
- */
-fast_exc_return_irq: /* restores irq state too */
- ld r3,SOFTE(r1)
- TRACE_AND_RESTORE_IRQ(r3);
- ld r12,_MSR(r1)
- rldicl r4,r12,49,63 /* get MSR_EE to LSB */
- stb r4,PACAHARDIRQEN(r13) /* restore paca->hard_enabled */
- b 1f
-
- .globl fast_exception_return
-fast_exception_return:
- ld r12,_MSR(r1)
-1: ld r11,_NIP(r1)
- andi. r3,r12,MSR_RI /* check if RI is set */
- beq- unrecov_fer
-
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
- andi. r3,r12,MSR_PR
- beq 2f
- ACCOUNT_CPU_USER_EXIT(r3, r4)
-2:
-#endif
-
- ld r3,_CCR(r1)
- ld r4,_LINK(r1)
- ld r5,_CTR(r1)
- ld r6,_XER(r1)
- mtcr r3
- mtlr r4
- mtctr r5
- mtxer r6
- REST_GPR(0, r1)
- REST_8GPRS(2, r1)
-
- mfmsr r10
- rldicl r10,r10,48,1 /* clear EE */
- rldicr r10,r10,16,61 /* clear RI (LE is 0 already) */
- mtmsrd r10,1
-
- mtspr SPRN_SRR1,r12
- mtspr SPRN_SRR0,r11
- REST_4GPRS(10, r1)
- ld r1,GPR1(r1)
- rfid
- b . /* prevent speculative execution */
-
-unrecov_fer:
- bl .save_nvgprs
-1: addi r3,r1,STACK_FRAME_OVERHEAD
- bl .unrecoverable_exception
- b 1b
-
-/*
* Here r13 points to the paca, r9 contains the saved CR,
* SRR0 and SRR1 are saved in r11 and r12,
* r9 - r13 are saved in paca->exgen.
@@ -616,6 +599,9 @@
*/
_GLOBAL(slb_miss_realmode)
mflr r10
+#ifdef CONFIG_RELOCATABLE
+ mtctr r11
+#endif
stw r9,PACA_EXSLB+EX_CCR(r13) /* save CR in exc. frame */
std r10,PACA_EXSLB+EX_LR(r13) /* save LR */
@@ -666,11 +652,10 @@
END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
#endif /* CONFIG_PPC_ISERIES */
mfspr r11,SPRN_SRR0
- clrrdi r10,r13,32
+ ld r10,PACAKBASE(r13)
LOAD_HANDLER(r10,unrecov_slb)
mtspr SPRN_SRR0,r10
- mfmsr r10
- ori r10,r10,MSR_IR|MSR_DR|MSR_RI
+ ld r10,PACAKMSR(r13)
mtspr SPRN_SRR1,r10
rfid
b .
@@ -766,6 +751,85 @@
bl .altivec_unavailable_exception
b .ret_from_except
+ .align 7
+ .globl vsx_unavailable_common
+vsx_unavailable_common:
+ EXCEPTION_PROLOG_COMMON(0xf40, PACA_EXGEN)
+#ifdef CONFIG_VSX
+BEGIN_FTR_SECTION
+ bne .load_up_vsx
+1:
+END_FTR_SECTION_IFSET(CPU_FTR_VSX)
+#endif
+ bl .save_nvgprs
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ ENABLE_INTS
+ bl .vsx_unavailable_exception
+ b .ret_from_except
+
+ .align 7
+ .globl __end_handlers
+__end_handlers:
+
+/*
+ * Return from an exception with minimal checks.
+ * The caller is assumed to have done EXCEPTION_PROLOG_COMMON.
+ * If interrupts have been enabled, or anything has been
+ * done that might have changed the scheduling status of
+ * any task or sent any task a signal, you should use
+ * ret_from_except or ret_from_except_lite instead of this.
+ */
+fast_exc_return_irq: /* restores irq state too */
+ ld r3,SOFTE(r1)
+ TRACE_AND_RESTORE_IRQ(r3);
+ ld r12,_MSR(r1)
+ rldicl r4,r12,49,63 /* get MSR_EE to LSB */
+ stb r4,PACAHARDIRQEN(r13) /* restore paca->hard_enabled */
+ b 1f
+
+ .globl fast_exception_return
+fast_exception_return:
+ ld r12,_MSR(r1)
+1: ld r11,_NIP(r1)
+ andi. r3,r12,MSR_RI /* check if RI is set */
+ beq- unrecov_fer
+
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+ andi. r3,r12,MSR_PR
+ beq 2f
+ ACCOUNT_CPU_USER_EXIT(r3, r4)
+2:
+#endif
+
+ ld r3,_CCR(r1)
+ ld r4,_LINK(r1)
+ ld r5,_CTR(r1)
+ ld r6,_XER(r1)
+ mtcr r3
+ mtlr r4
+ mtctr r5
+ mtxer r6
+ REST_GPR(0, r1)
+ REST_8GPRS(2, r1)
+
+ mfmsr r10
+ rldicl r10,r10,48,1 /* clear EE */
+ rldicr r10,r10,16,61 /* clear RI (LE is 0 already) */
+ mtmsrd r10,1
+
+ mtspr SPRN_SRR1,r12
+ mtspr SPRN_SRR0,r11
+ REST_4GPRS(10, r1)
+ ld r1,GPR1(r1)
+ rfid
+ b . /* prevent speculative execution */
+
+unrecov_fer:
+ bl .save_nvgprs
+1: addi r3,r1,STACK_FRAME_OVERHEAD
+ bl .unrecoverable_exception
+ b 1b
+
#ifdef CONFIG_ALTIVEC
/*
* load_up_altivec(unused, unused, tsk)
@@ -840,22 +904,6 @@
blr
#endif /* CONFIG_ALTIVEC */
- .align 7
- .globl vsx_unavailable_common
-vsx_unavailable_common:
- EXCEPTION_PROLOG_COMMON(0xf40, PACA_EXGEN)
-#ifdef CONFIG_VSX
-BEGIN_FTR_SECTION
- bne .load_up_vsx
-1:
-END_FTR_SECTION_IFSET(CPU_FTR_VSX)
-#endif
- bl .save_nvgprs
- addi r3,r1,STACK_FRAME_OVERHEAD
- ENABLE_INTS
- bl .vsx_unavailable_exception
- b .ret_from_except
-
#ifdef CONFIG_VSX
/*
* load_up_vsx(unused, unused, tsk)
@@ -1175,11 +1223,14 @@
/* turn on 64-bit mode */
bl .enable_64b_mode
+ /* get the TOC pointer (real address) */
+ bl .relative_toc
+
/* Set up a paca value for this processor. Since we have the
* physical cpu id in r24, we need to search the pacas to find
* which logical id maps to our physical one.
*/
- LOAD_REG_IMMEDIATE(r13, paca) /* Get base vaddr of paca array */
+ LOAD_REG_ADDR(r13, paca) /* Get base vaddr of paca array */
li r5,0 /* logical cpu id */
1: lhz r6,PACAHWCPUID(r13) /* Load HW procid from paca */
cmpw r6,r24 /* Compare to our id */
@@ -1208,7 +1259,7 @@
sync /* order paca.run and cur_cpu_spec */
/* See if we need to call a cpu state restore handler */
- LOAD_REG_IMMEDIATE(r23, cur_cpu_spec)
+ LOAD_REG_ADDR(r23, cur_cpu_spec)
ld r23,0(r23)
ld r23,CPU_SPEC_RESTORE(r23)
cmpdi 0,r23,0
@@ -1224,10 +1275,15 @@
b __secondary_start
#endif
+/*
+ * Turn the MMU off.
+ * Assumes we're mapped EA == RA if the MMU is on.
+ */
_STATIC(__mmu_off)
mfmsr r3
andi. r0,r3,MSR_IR|MSR_DR
beqlr
+ mflr r4
andc r3,r3,r0
mtspr SPRN_SRR0,r4
mtspr SPRN_SRR1,r3
@@ -1248,6 +1304,18 @@
*
*/
_GLOBAL(__start_initialization_multiplatform)
+ /* Make sure we are running in 64 bits mode */
+ bl .enable_64b_mode
+
+ /* Get TOC pointer (current runtime address) */
+ bl .relative_toc
+
+ /* find out where we are now */
+ bcl 20,31,$+4
+0: mflr r26 /* r26 = runtime addr here */
+ addis r26,r26,(_stext - 0b)@ha
+ addi r26,r26,(_stext - 0b)@l /* current runtime base addr */
+
/*
* Are we booted from a PROM Of-type client-interface ?
*/
@@ -1259,9 +1327,6 @@
mr r31,r3
mr r30,r4
- /* Make sure we are running in 64 bits mode */
- bl .enable_64b_mode
-
/* Setup some critical 970 SPRs before switching MMU off */
mfspr r0,SPRN_PVR
srwi r0,r0,16
@@ -1276,9 +1341,7 @@
1: bl .__cpu_preinit_ppc970
2:
- /* Switch off MMU if not already */
- LOAD_REG_IMMEDIATE(r4, .__after_prom_start - KERNELBASE)
- add r4,r4,r30
+ /* Switch off MMU if not already off */
bl .__mmu_off
b .__after_prom_start
@@ -1293,22 +1356,15 @@
/*
* Align the stack to 16-byte boundary
* Depending on the size and layout of the ELF sections in the initial
- * boot binary, the stack pointer will be unalignet on PowerMac
+ * boot binary, the stack pointer may be unaligned on PowerMac
*/
rldicr r1,r1,0,59
- /* Make sure we are running in 64 bits mode */
- bl .enable_64b_mode
-
- /* put a relocation offset into r3 */
- bl .reloc_offset
-
- LOAD_REG_IMMEDIATE(r2,__toc_start)
- addi r2,r2,0x4000
- addi r2,r2,0x4000
-
- /* Relocate the TOC from a virt addr to a real addr */
- add r2,r2,r3
+#ifdef CONFIG_RELOCATABLE
+ /* Relocate code for where we are now */
+ mr r3,r26
+ bl .relocate
+#endif
/* Restore parameters */
mr r3,r31
@@ -1318,60 +1374,51 @@
mr r7,r27
/* Do all of the interaction with OF client interface */
+ mr r8,r26
bl .prom_init
/* We never return */
trap
_STATIC(__after_prom_start)
+#ifdef CONFIG_RELOCATABLE
+ /* process relocations for the final address of the kernel */
+ lis r25,PAGE_OFFSET@highest /* compute virtual base of kernel */
+ sldi r25,r25,32
+ mr r3,r25
+ bl .relocate
+#endif
/*
- * We need to run with __start at physical address PHYSICAL_START.
+ * We need to run with _stext at physical address PHYSICAL_START.
* This will leave some code in the first 256B of
* real memory, which are reserved for software use.
- * The remainder of the first page is loaded with the fixed
- * interrupt vectors. The next two pages are filled with
- * unknown exception placeholders.
*
* Note: This process overwrites the OF exception vectors.
- * r26 == relocation offset
- * r27 == KERNELBASE
*/
- bl .reloc_offset
- mr r26,r3
- LOAD_REG_IMMEDIATE(r27, KERNELBASE)
-
- LOAD_REG_IMMEDIATE(r3, PHYSICAL_START) /* target addr */
-
- // XXX FIXME: Use phys returned by OF (r30)
- add r4,r27,r26 /* source addr */
- /* current address of _start */
- /* i.e. where we are running */
- /* the source addr */
-
- cmpdi r4,0 /* In some cases the loader may */
- bne 1f
- b .start_here_multiplatform /* have already put us at zero */
- /* so we can skip the copy. */
-1: LOAD_REG_IMMEDIATE(r5,copy_to_here) /* # bytes of memory to copy */
- sub r5,r5,r27
-
+ li r3,0 /* target addr */
+ mr. r4,r26 /* In some cases the loader may */
+ beq 9f /* have already put us at zero */
+ lis r5,(copy_to_here - _stext)@ha
+ addi r5,r5,(copy_to_here - _stext)@l /* # bytes of memory to copy */
li r6,0x100 /* Start offset, the first 0x100 */
/* bytes were copied earlier. */
bl .copy_and_flush /* copy the first n bytes */
/* this includes the code being */
/* executed here. */
-
- LOAD_REG_IMMEDIATE(r0, 4f) /* Jump to the copy of this code */
- mtctr r0 /* that we just made/relocated */
+ addis r8,r3,(4f - _stext)@ha /* Jump to the copy of this code */
+ addi r8,r8,(4f - _stext)@l /* that we just made */
+ mtctr r8
bctr
-4: LOAD_REG_IMMEDIATE(r5,klimit)
- add r5,r5,r26
- ld r5,0(r5) /* get the value of klimit */
- sub r5,r5,r27
+4: /* Now copy the rest of the kernel up to _end */
+ addis r5,r26,(p_end - _stext)@ha
+ ld r5,(p_end - _stext)@l(r5) /* get _end */
bl .copy_and_flush /* copy the rest */
- b .start_here_multiplatform
+
+9: b .start_here_multiplatform
+
+p_end: .llong _end - _stext
/*
* Copy routine used to copy the kernel to start at physical address 0
@@ -1436,6 +1483,9 @@
/* turn on 64-bit mode */
bl .enable_64b_mode
+ /* get TOC pointer (real address) */
+ bl .relative_toc
+
/* Copy some CPU settings from CPU 0 */
bl .__restore_cpu_ppc970
@@ -1445,10 +1495,10 @@
mtmsrd r3 /* RI on */
/* Set up a paca value for this processor. */
- LOAD_REG_IMMEDIATE(r4, paca) /* Get base vaddr of paca array */
- mulli r13,r24,PACA_SIZE /* Calculate vaddr of right paca */
+ LOAD_REG_ADDR(r4,paca) /* Get base vaddr of paca array */
+ mulli r13,r24,PACA_SIZE /* Calculate vaddr of right paca */
add r13,r13,r4 /* for this processor. */
- mtspr SPRN_SPRG3,r13 /* Save vaddr of paca in SPRG3 */
+ mtspr SPRN_SPRG3,r13 /* Save vaddr of paca in SPRG3 */
/* Create a temp kernel stack for use before relocation is on. */
ld r1,PACAEMERGSP(r13)
@@ -1476,9 +1526,6 @@
/* Set thread priority to MEDIUM */
HMT_MEDIUM
- /* Load TOC */
- ld r2,PACATOC(r13)
-
/* Do early setup for that CPU (stab, slb, hash table pointer) */
bl .early_setup_secondary
@@ -1515,9 +1562,11 @@
/*
* Running with relocation on at this point. All we want to do is
- * zero the stack back-chain pointer before going into C code.
+ * zero the stack back-chain pointer and get the TOC virtual address
+ * before going into C code.
*/
_GLOBAL(start_secondary_prolog)
+ ld r2,PACATOC(r13)
li r3,0
std r3,0(r1) /* Zero the stack frame pointer */
bl .start_secondary
@@ -1529,34 +1578,46 @@
*/
_GLOBAL(enable_64b_mode)
mfmsr r11 /* grab the current MSR */
- li r12,1
- rldicr r12,r12,MSR_SF_LG,(63-MSR_SF_LG)
- or r11,r11,r12
- li r12,1
- rldicr r12,r12,MSR_ISF_LG,(63-MSR_ISF_LG)
+ li r12,(MSR_SF | MSR_ISF)@highest
+ sldi r12,r12,48
or r11,r11,r12
mtmsrd r11
isync
blr
/*
+ * This puts the TOC pointer into r2, offset by 0x8000 (as expected
+ * by the toolchain). It computes the correct value for wherever we
+ * are running at the moment, using position-independent code.
+ */
+_GLOBAL(relative_toc)
+ mflr r0
+ bcl 20,31,$+4
+0: mflr r9
+ ld r2,(p_toc - 0b)(r9)
+ add r2,r2,r9
+ mtlr r0
+ blr
+
+p_toc: .llong __toc_start + 0x8000 - 0b
+
+/*
* This is where the main kernel code starts.
*/
_INIT_STATIC(start_here_multiplatform)
- /* get a new offset, now that the kernel has moved. */
- bl .reloc_offset
- mr r26,r3
+ /* set up the TOC (real address) */
+ bl .relative_toc
/* Clear out the BSS. It may have been done in prom_init,
* already but that's irrelevant since prom_init will soon
* be detached from the kernel completely. Besides, we need
* to clear it now for kexec-style entry.
*/
- LOAD_REG_IMMEDIATE(r11,__bss_stop)
- LOAD_REG_IMMEDIATE(r8,__bss_start)
+ LOAD_REG_ADDR(r11,__bss_stop)
+ LOAD_REG_ADDR(r8,__bss_start)
sub r11,r11,r8 /* bss size */
addi r11,r11,7 /* round up to an even double word */
- rldicl. r11,r11,61,3 /* shift right by 3 */
+ srdi. r11,r11,3 /* shift right by 3 */
beq 4f
addi r8,r8,-8
li r0,0
@@ -1569,35 +1630,35 @@
ori r6,r6,MSR_RI
mtmsrd r6 /* RI on */
- /* The following gets the stack and TOC set up with the regs */
+#ifdef CONFIG_RELOCATABLE
+ /* Save the physical address we're running at in kernstart_addr */
+ LOAD_REG_ADDR(r4, kernstart_addr)
+ clrldi r0,r25,2
+ std r0,0(r4)
+#endif
+
+ /* The following gets the stack set up with the regs */
/* pointing to the real addr of the kernel stack. This is */
/* all done to support the C function call below which sets */
/* up the htab. This is done because we have relocated the */
/* kernel but are still running in real mode. */
- LOAD_REG_IMMEDIATE(r3,init_thread_union)
- add r3,r3,r26
+ LOAD_REG_ADDR(r3,init_thread_union)
- /* set up a stack pointer (physical address) */
+ /* set up a stack pointer */
addi r1,r3,THREAD_SIZE
li r0,0
stdu r0,-STACK_FRAME_OVERHEAD(r1)
- /* set up the TOC (physical address) */
- LOAD_REG_IMMEDIATE(r2,__toc_start)
- addi r2,r2,0x4000
- addi r2,r2,0x4000
- add r2,r2,r26
-
/* Do very early kernel initializations, including initial hash table,
* stab and slb setup before we turn on relocation. */
/* Restore parameters passed from prom_init/kexec */
mr r3,r31
- bl .early_setup
+ bl .early_setup /* also sets r13 and SPRG3 */
- LOAD_REG_IMMEDIATE(r3, .start_here_common)
- LOAD_REG_IMMEDIATE(r4, MSR_KERNEL)
+ LOAD_REG_ADDR(r3, .start_here_common)
+ ld r4,PACAKMSR(r13)
mtspr SPRN_SRR0,r3
mtspr SPRN_SRR1,r4
rfid
@@ -1606,21 +1667,11 @@
/* This is where all platforms converge execution */
_INIT_GLOBAL(start_here_common)
/* relocation is on at this point */
-
- /* The following code sets up the SP and TOC now that we are */
- /* running with translation enabled. */
-
- LOAD_REG_IMMEDIATE(r3,init_thread_union)
-
- /* set up the stack */
- addi r1,r3,THREAD_SIZE
- li r0,0
- stdu r0,-STACK_FRAME_OVERHEAD(r1)
-
- /* Load the TOC */
- ld r2,PACATOC(r13)
std r1,PACAKSAVE(r13)
+ /* Load the TOC (virtual address) */
+ ld r2,PACATOC(r13)
+
bl .setup_system
/* Load up the kernel context */
diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
index 3cb52fa..590304c 100644
--- a/arch/powerpc/kernel/head_fsl_booke.S
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -422,7 +422,6 @@
* r12 is pointer to the pte
*/
#ifdef CONFIG_PTE_64BIT
-#define PTE_FLAGS_OFFSET 4
#define FIND_PTE \
rlwinm r12, r10, 13, 19, 29; /* Compute pgdir/pmd offset */ \
lwzx r11, r12, r11; /* Get pgd/pmd entry */ \
@@ -431,7 +430,6 @@
rlwimi r12, r10, 23, 20, 28; /* Compute pte address */ \
lwz r11, 4(r12); /* Get pte entry */
#else
-#define PTE_FLAGS_OFFSET 0
#define FIND_PTE \
rlwimi r11, r10, 12, 20, 29; /* Create L1 (pgdir/pmd) address */ \
lwz r11, 0(r11); /* Get L1 entry */ \
@@ -579,13 +577,19 @@
FIND_PTE
andc. r13,r13,r11 /* Check permission */
- bne 2f /* Bail if permission mismach */
#ifdef CONFIG_PTE_64BIT
- lwz r13, 0(r12)
+#ifdef CONFIG_SMP
+ subf r10,r11,r12 /* create false data dep */
+ lwzx r13,r11,r10 /* Get upper pte bits */
+#else
+ lwz r13,0(r12) /* Get upper pte bits */
+#endif
#endif
- /* Jump to common tlb load */
+ bne 2f /* Bail if permission/valid mismach */
+
+ /* Jump to common tlb load */
b finish_tlb_load
2:
/* The bailout. Restore registers to pre-exception conditions
@@ -640,11 +644,17 @@
FIND_PTE
andc. r13,r13,r11 /* Check permission */
- bne 2f /* Bail if permission mismach */
#ifdef CONFIG_PTE_64BIT
- lwz r13, 0(r12)
+#ifdef CONFIG_SMP
+ subf r10,r11,r12 /* create false data dep */
+ lwzx r13,r11,r10 /* Get upper pte bits */
+#else
+ lwz r13,0(r12) /* Get upper pte bits */
#endif
+#endif
+
+ bne 2f /* Bail if permission mismach */
/* Jump to common TLB load point */
b finish_tlb_load
@@ -702,7 +712,7 @@
/*
* Both the instruction and data TLB miss get to this
* point to load the TLB.
- * r10 - EA of fault
+ * r10 - available to use
* r11 - TLB (info from Linux PTE)
* r12 - available to use
* r13 - upper bits of PTE (if PTE_64BIT) or available to use
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index d972dec..ac222d0 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -439,8 +439,8 @@
static LIST_HEAD(irq_hosts);
static DEFINE_SPINLOCK(irq_big_lock);
-static DEFINE_PER_CPU(unsigned int, irq_radix_reader);
-static unsigned int irq_radix_writer;
+static unsigned int revmap_trees_allocated;
+static DEFINE_MUTEX(revmap_trees_mutex);
struct irq_map_entry irq_map[NR_IRQS];
static unsigned int irq_virq_count = NR_IRQS;
static struct irq_host *irq_default_host;
@@ -583,57 +583,6 @@
irq_virq_count = count;
}
-/* radix tree not lockless safe ! we use a brlock-type mecanism
- * for now, until we can use a lockless radix tree
- */
-static void irq_radix_wrlock(unsigned long *flags)
-{
- unsigned int cpu, ok;
-
- spin_lock_irqsave(&irq_big_lock, *flags);
- irq_radix_writer = 1;
- smp_mb();
- do {
- barrier();
- ok = 1;
- for_each_possible_cpu(cpu) {
- if (per_cpu(irq_radix_reader, cpu)) {
- ok = 0;
- break;
- }
- }
- if (!ok)
- cpu_relax();
- } while(!ok);
-}
-
-static void irq_radix_wrunlock(unsigned long flags)
-{
- smp_wmb();
- irq_radix_writer = 0;
- spin_unlock_irqrestore(&irq_big_lock, flags);
-}
-
-static void irq_radix_rdlock(unsigned long *flags)
-{
- local_irq_save(*flags);
- __get_cpu_var(irq_radix_reader) = 1;
- smp_mb();
- if (likely(irq_radix_writer == 0))
- return;
- __get_cpu_var(irq_radix_reader) = 0;
- smp_wmb();
- spin_lock(&irq_big_lock);
- __get_cpu_var(irq_radix_reader) = 1;
- spin_unlock(&irq_big_lock);
-}
-
-static void irq_radix_rdunlock(unsigned long flags)
-{
- __get_cpu_var(irq_radix_reader) = 0;
- local_irq_restore(flags);
-}
-
static int irq_setup_virq(struct irq_host *host, unsigned int virq,
irq_hw_number_t hwirq)
{
@@ -788,7 +737,6 @@
{
struct irq_host *host;
irq_hw_number_t hwirq;
- unsigned long flags;
if (virq == NO_IRQ)
return;
@@ -821,12 +769,16 @@
host->revmap_data.linear.revmap[hwirq] = NO_IRQ;
break;
case IRQ_HOST_MAP_TREE:
- /* Check if radix tree allocated yet */
- if (host->revmap_data.tree.gfp_mask == 0)
+ /*
+ * Check if radix tree allocated yet, if not then nothing to
+ * remove.
+ */
+ smp_rmb();
+ if (revmap_trees_allocated < 1)
break;
- irq_radix_wrlock(&flags);
+ mutex_lock(&revmap_trees_mutex);
radix_tree_delete(&host->revmap_data.tree, hwirq);
- irq_radix_wrunlock(flags);
+ mutex_unlock(&revmap_trees_mutex);
break;
}
@@ -875,45 +827,64 @@
EXPORT_SYMBOL_GPL(irq_find_mapping);
-unsigned int irq_radix_revmap(struct irq_host *host,
- irq_hw_number_t hwirq)
+unsigned int irq_radix_revmap_lookup(struct irq_host *host,
+ irq_hw_number_t hwirq)
{
- struct radix_tree_root *tree;
struct irq_map_entry *ptr;
unsigned int virq;
- unsigned long flags;
WARN_ON(host->revmap_type != IRQ_HOST_MAP_TREE);
- /* Check if the radix tree exist yet. We test the value of
- * the gfp_mask for that. Sneaky but saves another int in the
- * structure. If not, we fallback to slow mode
+ /*
+ * Check if the radix tree exists and has bee initialized.
+ * If not, we fallback to slow mode
*/
- tree = &host->revmap_data.tree;
- if (tree->gfp_mask == 0)
+ if (revmap_trees_allocated < 2)
return irq_find_mapping(host, hwirq);
/* Now try to resolve */
- irq_radix_rdlock(&flags);
- ptr = radix_tree_lookup(tree, hwirq);
- irq_radix_rdunlock(flags);
+ /*
+ * No rcu_read_lock(ing) needed, the ptr returned can't go under us
+ * as it's referencing an entry in the static irq_map table.
+ */
+ ptr = radix_tree_lookup(&host->revmap_data.tree, hwirq);
- /* Found it, return */
- if (ptr) {
+ /*
+ * If found in radix tree, then fine.
+ * Else fallback to linear lookup - this should not happen in practice
+ * as it means that we failed to insert the node in the radix tree.
+ */
+ if (ptr)
virq = ptr - irq_map;
- return virq;
- }
+ else
+ virq = irq_find_mapping(host, hwirq);
- /* If not there, try to insert it */
- virq = irq_find_mapping(host, hwirq);
- if (virq != NO_IRQ) {
- irq_radix_wrlock(&flags);
- radix_tree_insert(tree, hwirq, &irq_map[virq]);
- irq_radix_wrunlock(flags);
- }
return virq;
}
+void irq_radix_revmap_insert(struct irq_host *host, unsigned int virq,
+ irq_hw_number_t hwirq)
+{
+
+ WARN_ON(host->revmap_type != IRQ_HOST_MAP_TREE);
+
+ /*
+ * Check if the radix tree exists yet.
+ * If not, then the irq will be inserted into the tree when it gets
+ * initialized.
+ */
+ smp_rmb();
+ if (revmap_trees_allocated < 1)
+ return;
+
+ if (virq != NO_IRQ) {
+ mutex_lock(&revmap_trees_mutex);
+ radix_tree_insert(&host->revmap_data.tree, hwirq,
+ &irq_map[virq]);
+ mutex_unlock(&revmap_trees_mutex);
+ }
+}
+
unsigned int irq_linear_revmap(struct irq_host *host,
irq_hw_number_t hwirq)
{
@@ -1020,14 +991,44 @@
static int irq_late_init(void)
{
struct irq_host *h;
- unsigned long flags;
+ unsigned int i;
- irq_radix_wrlock(&flags);
+ /*
+ * No mutual exclusion with respect to accessors of the tree is needed
+ * here as the synchronization is done via the state variable
+ * revmap_trees_allocated.
+ */
list_for_each_entry(h, &irq_hosts, link) {
if (h->revmap_type == IRQ_HOST_MAP_TREE)
- INIT_RADIX_TREE(&h->revmap_data.tree, GFP_ATOMIC);
+ INIT_RADIX_TREE(&h->revmap_data.tree, GFP_KERNEL);
}
- irq_radix_wrunlock(flags);
+
+ /*
+ * Make sure the radix trees inits are visible before setting
+ * the flag
+ */
+ smp_wmb();
+ revmap_trees_allocated = 1;
+
+ /*
+ * Insert the reverse mapping for those interrupts already present
+ * in irq_map[].
+ */
+ mutex_lock(&revmap_trees_mutex);
+ for (i = 0; i < irq_virq_count; i++) {
+ if (irq_map[i].host &&
+ (irq_map[i].host->revmap_type == IRQ_HOST_MAP_TREE))
+ radix_tree_insert(&irq_map[i].host->revmap_data.tree,
+ irq_map[i].hwirq, &irq_map[i]);
+ }
+ mutex_unlock(&revmap_trees_mutex);
+
+ /*
+ * Make sure the radix trees insertions are visible before setting
+ * the flag
+ */
+ smp_wmb();
+ revmap_trees_allocated = 2;
return 0;
}
diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c
index b3eef30..d051e8c 100644
--- a/arch/powerpc/kernel/lparcfg.c
+++ b/arch/powerpc/kernel/lparcfg.c
@@ -510,10 +510,10 @@
return -EINVAL;
pr_debug("%s: current_entitled = %lu, current_weight = %u\n",
- __FUNCTION__, ppp_data.entitlement, ppp_data.weight);
+ __func__, ppp_data.entitlement, ppp_data.weight);
pr_debug("%s: new_entitled = %lu, new_weight = %u\n",
- __FUNCTION__, new_entitled, new_weight);
+ __func__, new_entitled, new_weight);
retval = plpar_hcall_norets(H_SET_PPP, new_entitled, new_weight);
return retval;
@@ -556,10 +556,10 @@
return -EINVAL;
pr_debug("%s: current_entitled = %lu, current_weight = %u\n",
- __FUNCTION__, mpp_data.entitled_mem, mpp_data.mem_weight);
+ __func__, mpp_data.entitled_mem, mpp_data.mem_weight);
pr_debug("%s: new_entitled = %lu, new_weight = %u\n",
- __FUNCTION__, new_entitled, new_weight);
+ __func__, new_entitled, new_weight);
rc = plpar_hcall_norets(H_SET_MPP, new_entitled, new_weight);
return rc;
diff --git a/arch/powerpc/kernel/misc.S b/arch/powerpc/kernel/misc.S
index 85cb6f3..2d29752 100644
--- a/arch/powerpc/kernel/misc.S
+++ b/arch/powerpc/kernel/misc.S
@@ -31,11 +31,14 @@
mflr r0
bl 1f
1: mflr r3
- LOAD_REG_IMMEDIATE(r4,1b)
+ PPC_LL r4,(2f-1b)(r3)
subf r3,r4,r3
mtlr r0
blr
+ .align 3
+2: PPC_LONG 1b
+
/*
* add_reloc_offset(x) returns x + reloc_offset().
*/
@@ -43,12 +46,15 @@
mflr r0
bl 1f
1: mflr r5
- LOAD_REG_IMMEDIATE(r4,1b)
+ PPC_LL r4,(2f-1b)(r5)
subf r5,r4,r5
add r3,r3,r5
mtlr r0
blr
+ .align 3
+2: PPC_LONG 1b
+
_GLOBAL(kernel_execve)
li r0,__NR_execve
sc
diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S
index 7a6dfbc..6a9b4bf 100644
--- a/arch/powerpc/kernel/misc_32.S
+++ b/arch/powerpc/kernel/misc_32.S
@@ -274,6 +274,10 @@
/*
* Flush MMU TLB
*/
+#ifndef CONFIG_FSL_BOOKE
+_GLOBAL(_tlbil_all)
+_GLOBAL(_tlbil_pid)
+#endif
_GLOBAL(_tlbia)
#if defined(CONFIG_40x)
sync /* Flush to memory before changing mapping */
@@ -344,6 +348,9 @@
/*
* Flush MMU TLB for a particular address
*/
+#ifndef CONFIG_FSL_BOOKE
+_GLOBAL(_tlbil_va)
+#endif
_GLOBAL(_tlbie)
#if defined(CONFIG_40x)
/* We run the search with interrupts disabled because we have to change
@@ -436,6 +443,53 @@
#endif /* ! CONFIG_40x */
blr
+#if defined(CONFIG_FSL_BOOKE)
+/*
+ * Flush MMU TLB, but only on the local processor (no broadcast)
+ */
+_GLOBAL(_tlbil_all)
+#define MMUCSR0_TLBFI (MMUCSR0_TLB0FI | MMUCSR0_TLB1FI | \
+ MMUCSR0_TLB2FI | MMUCSR0_TLB3FI)
+ li r3,(MMUCSR0_TLBFI)@l
+ mtspr SPRN_MMUCSR0, r3
+1:
+ mfspr r3,SPRN_MMUCSR0
+ andi. r3,r3,MMUCSR0_TLBFI@l
+ bne 1b
+ blr
+
+/*
+ * Flush MMU TLB for a particular process id, but only on the local processor
+ * (no broadcast)
+ */
+_GLOBAL(_tlbil_pid)
+/* we currently do an invalidate all since we don't have per pid invalidate */
+ li r3,(MMUCSR0_TLBFI)@l
+ mtspr SPRN_MMUCSR0, r3
+1:
+ mfspr r3,SPRN_MMUCSR0
+ andi. r3,r3,MMUCSR0_TLBFI@l
+ bne 1b
+ blr
+
+/*
+ * Flush MMU TLB for a particular address, but only on the local processor
+ * (no broadcast)
+ */
+_GLOBAL(_tlbil_va)
+ slwi r4,r4,16
+ mtspr SPRN_MAS6,r4 /* assume AS=0 for now */
+ tlbsx 0,r3
+ mfspr r4,SPRN_MAS1 /* check valid */
+ andis. r3,r4,MAS1_VALID@h
+ beqlr
+ rlwinm r4,r4,0,1,31
+ mtspr SPRN_MAS1,r4
+ tlbwe
+ blr
+#endif /* CONFIG_FSL_BOOKE */
+
+
/*
* Flush instruction cache.
* This is a no-op on the 601.
@@ -846,8 +900,10 @@
li r4,0 /* new sp (unused) */
li r0,__NR_clone
sc
- cmpwi 0,r3,0 /* parent or child? */
- bne 1f /* return if parent */
+ bns+ 1f /* did system call indicate error? */
+ neg r3,r3 /* if so, make return code negative */
+1: cmpwi 0,r3,0 /* parent or child? */
+ bne 2f /* return if parent */
li r0,0 /* make top-level stack frame */
stwu r0,-16(r1)
mtlr r30 /* fn addr in lr */
@@ -857,7 +913,7 @@
li r0,__NR_exit /* exit if function returns */
li r3,0
sc
-1: lwz r30,8(r1)
+2: lwz r30,8(r1)
lwz r31,12(r1)
addi r1,r1,16
blr
diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S
index 4dd70cf..3053fe5 100644
--- a/arch/powerpc/kernel/misc_64.S
+++ b/arch/powerpc/kernel/misc_64.S
@@ -426,8 +426,10 @@
li r4,0 /* new sp (unused) */
li r0,__NR_clone
sc
- cmpdi 0,r3,0 /* parent or child? */
- bne 1f /* return if parent */
+ bns+ 1f /* did system call indicate error? */
+ neg r3,r3 /* if so, make return code negative */
+1: cmpdi 0,r3,0 /* parent or child? */
+ bne 2f /* return if parent */
li r0,0
stdu r0,-STACK_FRAME_OVERHEAD(r1)
ld r2,8(r29)
@@ -438,7 +440,7 @@
li r0,__NR_exit /* exit after child exits */
li r3,0
sc
-1: addi r1,r1,STACK_FRAME_OVERHEAD
+2: addi r1,r1,STACK_FRAME_OVERHEAD
ld r29,-24(r1)
ld r30,-16(r1)
blr
diff --git a/arch/powerpc/kernel/of_device.c b/arch/powerpc/kernel/of_device.c
index e9be908..93ae5b1 100644
--- a/arch/powerpc/kernel/of_device.c
+++ b/arch/powerpc/kernel/of_device.c
@@ -78,7 +78,7 @@
dev->dev.parent = parent;
dev->dev.release = of_release_dev;
dev->dev.archdata.of_node = np;
- dev->dev.archdata.numa_node = of_node_to_nid(np);
+ set_dev_node(&dev->dev, of_node_to_nid(np));
if (bus_id)
strlcpy(dev->dev.bus_id, bus_id, BUS_ID_SIZE);
diff --git a/arch/powerpc/kernel/paca.c b/arch/powerpc/kernel/paca.c
index c9bf17e..48a3471 100644
--- a/arch/powerpc/kernel/paca.c
+++ b/arch/powerpc/kernel/paca.c
@@ -12,6 +12,7 @@
#include <asm/lppaca.h>
#include <asm/paca.h>
+#include <asm/sections.h>
/* This symbol is provided by the linker - let it fill in the paca
* field correctly */
@@ -79,6 +80,8 @@
new_paca->lock_token = 0x8000;
new_paca->paca_index = cpu;
new_paca->kernel_toc = kernel_toc;
+ new_paca->kernelbase = (unsigned long) _stext;
+ new_paca->kernel_msr = MSR_KERNEL;
new_paca->hw_cpu_id = 0xffff;
new_paca->slb_shadow_ptr = &slb_shadow[cpu];
new_paca->__current = &init_task;
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index ea0c61e..01ce8c3 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -56,6 +56,34 @@
/* Default PCI flags is 0 */
unsigned int ppc_pci_flags;
+static struct dma_mapping_ops *pci_dma_ops;
+
+void set_pci_dma_ops(struct dma_mapping_ops *dma_ops)
+{
+ pci_dma_ops = dma_ops;
+}
+
+struct dma_mapping_ops *get_pci_dma_ops(void)
+{
+ return pci_dma_ops;
+}
+EXPORT_SYMBOL(get_pci_dma_ops);
+
+int pci_set_dma_mask(struct pci_dev *dev, u64 mask)
+{
+ return dma_set_mask(&dev->dev, mask);
+}
+
+int pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask)
+{
+ int rc;
+
+ rc = dma_set_mask(&dev->dev, mask);
+ dev->dev.coherent_dma_mask = dev->dma_mask;
+
+ return rc;
+}
+
struct pci_controller *pcibios_alloc_controller(struct device_node *dev)
{
struct pci_controller *phb;
@@ -180,6 +208,26 @@
return str;
}
+void __devinit pcibios_setup_new_device(struct pci_dev *dev)
+{
+ struct dev_archdata *sd = &dev->dev.archdata;
+
+ sd->of_node = pci_device_to_OF_node(dev);
+
+ DBG("PCI: device %s OF node: %s\n", pci_name(dev),
+ sd->of_node ? sd->of_node->full_name : "<none>");
+
+ sd->dma_ops = pci_dma_ops;
+#ifdef CONFIG_PPC32
+ sd->dma_data = (void *)PCI_DRAM_OFFSET;
+#endif
+ set_dev_node(&dev->dev, pcibus_to_node(dev->bus));
+
+ if (ppc_md.pci_dma_dev_setup)
+ ppc_md.pci_dma_dev_setup(dev);
+}
+EXPORT_SYMBOL(pcibios_setup_new_device);
+
/*
* Reads the interrupt pin to determine if interrupt is use by card.
* If the interrupt is used, then gets the interrupt line from the
@@ -371,7 +419,7 @@
struct pci_dev *pdev = NULL;
struct resource *found = NULL;
unsigned long prot = pgprot_val(protection);
- unsigned long offset = pfn << PAGE_SHIFT;
+ resource_size_t offset = ((resource_size_t)pfn) << PAGE_SHIFT;
int i;
if (page_is_ram(pfn))
@@ -422,7 +470,8 @@
int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
enum pci_mmap_state mmap_state, int write_combine)
{
- resource_size_t offset = vma->vm_pgoff << PAGE_SHIFT;
+ resource_size_t offset =
+ ((resource_size_t)vma->vm_pgoff) << PAGE_SHIFT;
struct resource *rp;
int ret;
@@ -731,11 +780,6 @@
res->start = (res->start + offset) & mask;
res->end = (res->end + offset) & mask;
-
- pr_debug("PCI:%s %016llx-%016llx\n",
- pci_name(dev),
- (unsigned long long)res->start,
- (unsigned long long)res->end);
}
@@ -781,6 +825,11 @@
(unsigned int)res->flags);
fixup_resource(res, dev);
+
+ pr_debug("PCI:%s %016llx-%016llx\n",
+ pci_name(dev),
+ (unsigned long long)res->start,
+ (unsigned long long)res->end);
}
/* Call machine specific resource fixup */
@@ -789,58 +838,127 @@
}
DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pcibios_fixup_resources);
-static void __devinit __pcibios_fixup_bus(struct pci_bus *bus)
+/* This function tries to figure out if a bridge resource has been initialized
+ * by the firmware or not. It doesn't have to be absolutely bullet proof, but
+ * things go more smoothly when it gets it right. It should covers cases such
+ * as Apple "closed" bridge resources and bare-metal pSeries unassigned bridges
+ */
+static int __devinit pcibios_uninitialized_bridge_resource(struct pci_bus *bus,
+ struct resource *res)
{
struct pci_controller *hose = pci_bus_to_host(bus);
struct pci_dev *dev = bus->self;
+ resource_size_t offset;
+ u16 command;
+ int i;
+
+ /* We don't do anything if PCI_PROBE_ONLY is set */
+ if (ppc_pci_flags & PPC_PCI_PROBE_ONLY)
+ return 0;
+
+ /* Job is a bit different between memory and IO */
+ if (res->flags & IORESOURCE_MEM) {
+ /* If the BAR is non-0 (res != pci_mem_offset) then it's probably been
+ * initialized by somebody
+ */
+ if (res->start != hose->pci_mem_offset)
+ return 0;
+
+ /* The BAR is 0, let's check if memory decoding is enabled on
+ * the bridge. If not, we consider it unassigned
+ */
+ pci_read_config_word(dev, PCI_COMMAND, &command);
+ if ((command & PCI_COMMAND_MEMORY) == 0)
+ return 1;
+
+ /* Memory decoding is enabled and the BAR is 0. If any of the bridge
+ * resources covers that starting address (0 then it's good enough for
+ * us for memory
+ */
+ for (i = 0; i < 3; i++) {
+ if ((hose->mem_resources[i].flags & IORESOURCE_MEM) &&
+ hose->mem_resources[i].start == hose->pci_mem_offset)
+ return 0;
+ }
+
+ /* Well, it starts at 0 and we know it will collide so we may as
+ * well consider it as unassigned. That covers the Apple case.
+ */
+ return 1;
+ } else {
+ /* If the BAR is non-0, then we consider it assigned */
+ offset = (unsigned long)hose->io_base_virt - _IO_BASE;
+ if (((res->start - offset) & 0xfffffffful) != 0)
+ return 0;
+
+ /* Here, we are a bit different than memory as typically IO space
+ * starting at low addresses -is- valid. What we do instead if that
+ * we consider as unassigned anything that doesn't have IO enabled
+ * in the PCI command register, and that's it.
+ */
+ pci_read_config_word(dev, PCI_COMMAND, &command);
+ if (command & PCI_COMMAND_IO)
+ return 0;
+
+ /* It's starting at 0 and IO is disabled in the bridge, consider
+ * it unassigned
+ */
+ return 1;
+ }
+}
+
+/* Fixup resources of a PCI<->PCI bridge */
+static void __devinit pcibios_fixup_bridge(struct pci_bus *bus)
+{
+ struct resource *res;
+ int i;
+
+ struct pci_dev *dev = bus->self;
+
+ for (i = 0; i < PCI_BUS_NUM_RESOURCES; ++i) {
+ if ((res = bus->resource[i]) == NULL)
+ continue;
+ if (!res->flags)
+ continue;
+ if (i >= 3 && bus->self->transparent)
+ continue;
+
+ pr_debug("PCI:%s Bus rsrc %d %016llx-%016llx [%x] fixup...\n",
+ pci_name(dev), i,
+ (unsigned long long)res->start,\
+ (unsigned long long)res->end,
+ (unsigned int)res->flags);
+
+ /* Perform fixup */
+ fixup_resource(res, dev);
+
+ /* Try to detect uninitialized P2P bridge resources,
+ * and clear them out so they get re-assigned later
+ */
+ if (pcibios_uninitialized_bridge_resource(bus, res)) {
+ res->flags = 0;
+ pr_debug("PCI:%s (unassigned)\n", pci_name(dev));
+ } else {
+
+ pr_debug("PCI:%s %016llx-%016llx\n",
+ pci_name(dev),
+ (unsigned long long)res->start,
+ (unsigned long long)res->end);
+ }
+ }
+}
+
+static void __devinit __pcibios_fixup_bus(struct pci_bus *bus)
+{
+ struct pci_dev *dev = bus->self;
pr_debug("PCI: Fixup bus %d (%s)\n", bus->number, dev ? pci_name(dev) : "PHB");
/* Fixup PCI<->PCI bridges. Host bridges are handled separately, for
* now differently between 32 and 64 bits.
*/
- if (dev != NULL) {
- struct resource *res;
- int i;
-
- for (i = 0; i < PCI_BUS_NUM_RESOURCES; ++i) {
- if ((res = bus->resource[i]) == NULL)
- continue;
- if (!res->flags)
- continue;
- if (i >= 3 && bus->self->transparent)
- continue;
- /* On PowerMac, Apple leaves bridge windows open over
- * an inaccessible region of memory space (0...fffff)
- * which is somewhat bogus, but that's what they think
- * means disabled...
- *
- * We clear those to force them to be reallocated later
- *
- * We detect such regions by the fact that the base is
- * equal to the pci_mem_offset of the host bridge and
- * their size is smaller than 1M.
- */
- if (res->flags & IORESOURCE_MEM &&
- res->start == hose->pci_mem_offset &&
- res->end < 0x100000) {
- printk(KERN_INFO
- "PCI: Closing bogus Apple Firmware"
- " region %d on bus 0x%02x\n",
- i, bus->number);
- res->flags = 0;
- continue;
- }
-
- pr_debug("PCI:%s Bus rsrc %d %016llx-%016llx [%x] fixup...\n",
- pci_name(dev), i,
- (unsigned long long)res->start,\
- (unsigned long long)res->end,
- (unsigned int)res->flags);
-
- fixup_resource(res, dev);
- }
- }
+ if (dev != NULL)
+ pcibios_fixup_bridge(bus);
/* Additional setup that is different between 32 and 64 bits for now */
pcibios_do_bus_setup(bus);
diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c
index 88db4ff..131b1df 100644
--- a/arch/powerpc/kernel/pci_32.c
+++ b/arch/powerpc/kernel/pci_32.c
@@ -53,12 +53,19 @@
static int pci_bus_count;
+/* This will remain NULL for now, until isa-bridge.c is made common
+ * to both 32-bit and 64-bit.
+ */
+struct pci_dev *isa_bridge_pcidev;
+EXPORT_SYMBOL_GPL(isa_bridge_pcidev);
+
static void
-fixup_hide_host_resource_fsl(struct pci_dev* dev)
+fixup_hide_host_resource_fsl(struct pci_dev *dev)
{
int i, class = dev->class >> 8;
- if ((class == PCI_CLASS_PROCESSOR_POWERPC) &&
+ if ((class == PCI_CLASS_PROCESSOR_POWERPC ||
+ class == PCI_CLASS_BRIDGE_OTHER) &&
(dev->hdr_type == PCI_HEADER_TYPE_NORMAL) &&
(dev->bus->parent == NULL)) {
for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
@@ -424,6 +431,7 @@
unsigned long io_offset;
struct resource *res;
int i;
+ struct pci_dev *dev;
/* Hookup PHB resources */
io_offset = (unsigned long)hose->io_base_virt - isa_io_base;
@@ -457,6 +465,12 @@
bus->resource[i+1] = res;
}
}
+
+ if (ppc_md.pci_dma_bus_setup)
+ ppc_md.pci_dma_bus_setup(bus);
+
+ list_for_each_entry(dev, &bus->devices, bus_list)
+ pcibios_setup_new_device(dev);
}
/* the next one is stolen from the alpha port... */
diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c
index 30eedfc..8247cff 100644
--- a/arch/powerpc/kernel/pci_64.c
+++ b/arch/powerpc/kernel/pci_64.c
@@ -52,35 +52,6 @@
LIST_HEAD(hose_list);
-static struct dma_mapping_ops *pci_dma_ops;
-
-void set_pci_dma_ops(struct dma_mapping_ops *dma_ops)
-{
- pci_dma_ops = dma_ops;
-}
-
-struct dma_mapping_ops *get_pci_dma_ops(void)
-{
- return pci_dma_ops;
-}
-EXPORT_SYMBOL(get_pci_dma_ops);
-
-
-int pci_set_dma_mask(struct pci_dev *dev, u64 mask)
-{
- return dma_set_mask(&dev->dev, mask);
-}
-
-int pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask)
-{
- int rc;
-
- rc = dma_set_mask(&dev->dev, mask);
- dev->dev.coherent_dma_mask = dev->dma_mask;
-
- return rc;
-}
-
static void fixup_broken_pcnet32(struct pci_dev* dev)
{
if ((dev->class>>8 == PCI_CLASS_NETWORK_ETHERNET)) {
@@ -548,26 +519,6 @@
}
EXPORT_SYMBOL_GPL(pcibios_map_io_space);
-void __devinit pcibios_setup_new_device(struct pci_dev *dev)
-{
- struct dev_archdata *sd = &dev->dev.archdata;
-
- sd->of_node = pci_device_to_OF_node(dev);
-
- DBG("PCI: device %s OF node: %s\n", pci_name(dev),
- sd->of_node ? sd->of_node->full_name : "<none>");
-
- sd->dma_ops = pci_dma_ops;
-#ifdef CONFIG_NUMA
- sd->numa_node = pcibus_to_node(dev->bus);
-#else
- sd->numa_node = -1;
-#endif
- if (ppc_md.pci_dma_dev_setup)
- ppc_md.pci_dma_dev_setup(dev);
-}
-EXPORT_SYMBOL(pcibios_setup_new_device);
-
void __devinit pcibios_do_bus_setup(struct pci_bus *bus)
{
struct pci_dev *dev;
diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c
index e1ea4fe..8edc235 100644
--- a/arch/powerpc/kernel/ppc_ksyms.c
+++ b/arch/powerpc/kernel/ppc_ksyms.c
@@ -119,6 +119,9 @@
EXPORT_SYMBOL(flush_tlb_kernel_range);
EXPORT_SYMBOL(flush_tlb_page);
EXPORT_SYMBOL(_tlbie);
+#if defined(CONFIG_4xx) || defined(CONFIG_8xx) || defined(CONFIG_FSL_BOOKE)
+EXPORT_SYMBOL(_tlbil_va);
+#endif
#endif
EXPORT_SYMBOL(__flush_icache_range);
EXPORT_SYMBOL(flush_dcache_range);
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index 87d83c5..3a2dc7e 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -888,9 +888,10 @@
*/
static int __init early_init_dt_scan_drconf_memory(unsigned long node)
{
- cell_t *dm, *ls;
+ cell_t *dm, *ls, *usm;
unsigned long l, n, flags;
u64 base, size, lmb_size;
+ unsigned int is_kexec_kdump = 0, rngs;
ls = (cell_t *)of_get_flat_dt_prop(node, "ibm,lmb-size", &l);
if (ls == NULL || l < dt_root_size_cells * sizeof(cell_t))
@@ -905,6 +906,12 @@
if (l < (n * (dt_root_addr_cells + 4) + 1) * sizeof(cell_t))
return 0;
+ /* check if this is a kexec/kdump kernel. */
+ usm = (cell_t *)of_get_flat_dt_prop(node, "linux,drconf-usable-memory",
+ &l);
+ if (usm != NULL)
+ is_kexec_kdump = 1;
+
for (; n != 0; --n) {
base = dt_mem_next_cell(dt_root_addr_cells, &dm);
flags = dm[3];
@@ -915,13 +922,34 @@
if ((flags & 0x80) || !(flags & 0x8))
continue;
size = lmb_size;
- if (iommu_is_off) {
- if (base >= 0x80000000ul)
+ rngs = 1;
+ if (is_kexec_kdump) {
+ /*
+ * For each lmb in ibm,dynamic-memory, a corresponding
+ * entry in linux,drconf-usable-memory property contains
+ * a counter 'p' followed by 'p' (base, size) duple.
+ * Now read the counter from
+ * linux,drconf-usable-memory property
+ */
+ rngs = dt_mem_next_cell(dt_root_size_cells, &usm);
+ if (!rngs) /* there are no (base, size) duple */
continue;
- if ((base + size) > 0x80000000ul)
- size = 0x80000000ul - base;
}
- lmb_add(base, size);
+ do {
+ if (is_kexec_kdump) {
+ base = dt_mem_next_cell(dt_root_addr_cells,
+ &usm);
+ size = dt_mem_next_cell(dt_root_size_cells,
+ &usm);
+ }
+ if (iommu_is_off) {
+ if (base >= 0x80000000ul)
+ continue;
+ if ((base + size) > 0x80000000ul)
+ size = 0x80000000ul - base;
+ }
+ lmb_add(base, size);
+ } while (--rngs);
}
lmb_dump_all();
return 0;
@@ -1164,6 +1192,9 @@
/* Reserve LMB regions used by kernel, initrd, dt, etc... */
lmb_reserve(PHYSICAL_START, __pa(klimit) - PHYSICAL_START);
+ /* If relocatable, reserve first 32k for interrupt vectors etc. */
+ if (PHYSICAL_START > MEMORY_START)
+ lmb_reserve(MEMORY_START, 0x8000);
reserve_kdump_trampoline();
reserve_crashkernel();
early_reserve_mem();
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index b72849a..2fdbc18 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -732,7 +732,7 @@
u32 ignore_me;
} rpadesc;
} rpanote;
-} fake_elf = {
+} fake_elf __section(.fakeelf) = {
.elfhdr = {
.e_ident = { 0x7f, 'E', 'L', 'F',
ELFCLASS32, ELFDATA2MSB, EV_CURRENT },
@@ -774,13 +774,13 @@
.type = 0x12759999,
.name = "IBM,RPA-Client-Config",
.rpadesc = {
- .lpar_affinity = 0,
- .min_rmo_size = 64, /* in megabytes */
+ .lpar_affinity = 1,
+ .min_rmo_size = 128, /* in megabytes */
.min_rmo_percent = 0,
- .max_pft_size = 48, /* 2^48 bytes max PFT size */
+ .max_pft_size = 46, /* 2^46 bytes max PFT size */
.splpar = 1,
.min_load = ~0U,
- .new_mem_def = 0
+ .new_mem_def = 1
}
}
};
@@ -1321,7 +1321,7 @@
*
* -- Cort
*/
-extern void __secondary_hold(void);
+extern char __secondary_hold;
extern unsigned long __secondary_hold_spinloop;
extern unsigned long __secondary_hold_acknowledge;
@@ -1342,13 +1342,7 @@
= (void *) LOW_ADDR(__secondary_hold_spinloop);
unsigned long *acknowledge
= (void *) LOW_ADDR(__secondary_hold_acknowledge);
-#ifdef CONFIG_PPC64
- /* __secondary_hold is actually a descriptor, not the text address */
- unsigned long secondary_hold
- = __pa(*PTRRELOC((unsigned long *)__secondary_hold));
-#else
unsigned long secondary_hold = LOW_ADDR(__secondary_hold);
-#endif
prom_debug("prom_hold_cpus: start...\n");
prom_debug(" 1) spinloop = 0x%x\n", (unsigned long)spinloop);
@@ -2315,13 +2309,14 @@
unsigned long __init prom_init(unsigned long r3, unsigned long r4,
unsigned long pp,
- unsigned long r6, unsigned long r7)
+ unsigned long r6, unsigned long r7,
+ unsigned long kbase)
{
struct prom_t *_prom;
unsigned long hdr;
- unsigned long offset = reloc_offset();
#ifdef CONFIG_PPC32
+ unsigned long offset = reloc_offset();
reloc_got2(offset);
#endif
@@ -2355,9 +2350,11 @@
*/
RELOC(of_platform) = prom_find_machine_type();
+#ifndef CONFIG_RELOCATABLE
/* Bail if this is a kdump kernel. */
if (PHYSICAL_START > 0)
prom_panic("Error: You can't boot a kdump kernel from OF!\n");
+#endif
/*
* Check for an initrd
@@ -2377,7 +2374,7 @@
* Copy the CPU hold code
*/
if (RELOC(of_platform) != PLATFORM_POWERMAC)
- copy_and_flush(0, KERNELBASE + offset, 0x100, 0);
+ copy_and_flush(0, kbase, 0x100, 0);
/*
* Do early parsing of command line
@@ -2480,7 +2477,7 @@
reloc_got2(-offset);
#endif
- __start(hdr, KERNELBASE + offset, 0);
+ __start(hdr, kbase, 0);
return 0;
}
diff --git a/arch/powerpc/kernel/reloc_64.S b/arch/powerpc/kernel/reloc_64.S
new file mode 100644
index 0000000..b47a0e1
--- /dev/null
+++ b/arch/powerpc/kernel/reloc_64.S
@@ -0,0 +1,87 @@
+/*
+ * Code to process dynamic relocations in the kernel.
+ *
+ * Copyright 2008 Paul Mackerras, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <asm/ppc_asm.h>
+
+RELA = 7
+RELACOUNT = 0x6ffffff9
+R_PPC64_RELATIVE = 22
+
+/*
+ * r3 = desired final address of kernel
+ */
+_GLOBAL(relocate)
+ mflr r0
+ bcl 20,31,$+4
+0: mflr r12 /* r12 has runtime addr of label 0 */
+ mtlr r0
+ ld r11,(p_dyn - 0b)(r12)
+ add r11,r11,r12 /* r11 has runtime addr of .dynamic section */
+ ld r9,(p_rela - 0b)(r12)
+ add r9,r9,r12 /* r9 has runtime addr of .rela.dyn section */
+ ld r10,(p_st - 0b)(r12)
+ add r10,r10,r12 /* r10 has runtime addr of _stext */
+
+ /*
+ * Scan the dynamic section for the RELA and RELACOUNT entries.
+ */
+ li r7,0
+ li r8,0
+1: ld r6,0(r11) /* get tag */
+ cmpdi r6,0
+ beq 4f /* end of list */
+ cmpdi r6,RELA
+ bne 2f
+ ld r7,8(r11) /* get RELA pointer in r7 */
+ b 3f
+2: addis r6,r6,(-RELACOUNT)@ha
+ cmpdi r6,RELACOUNT@l
+ bne 3f
+ ld r8,8(r11) /* get RELACOUNT value in r8 */
+3: addi r11,r11,16
+ b 1b
+4: cmpdi r7,0 /* check we have both RELA and RELACOUNT */
+ cmpdi cr1,r8,0
+ beq 6f
+ beq cr1,6f
+
+ /*
+ * Work out linktime address of _stext and hence the
+ * relocation offset to be applied.
+ * cur_offset [r7] = rela.run [r9] - rela.link [r7]
+ * _stext.link [r10] = _stext.run [r10] - cur_offset [r7]
+ * final_offset [r3] = _stext.final [r3] - _stext.link [r10]
+ */
+ subf r7,r7,r9 /* cur_offset */
+ subf r10,r7,r10
+ subf r3,r10,r3 /* final_offset */
+
+ /*
+ * Run through the list of relocations and process the
+ * R_PPC64_RELATIVE ones.
+ */
+ mtctr r8
+5: lwz r0,12(9) /* ELF64_R_TYPE(reloc->r_info) */
+ cmpwi r0,R_PPC64_RELATIVE
+ bne 6f
+ ld r6,0(r9) /* reloc->r_offset */
+ ld r0,16(r9) /* reloc->r_addend */
+ add r0,r0,r3
+ stdx r0,r7,r6
+ addi r9,r9,24
+ bdnz 5b
+
+6: blr
+
+p_dyn: .llong __dynamic_start - 0b
+p_rela: .llong __rela_dyn_start - 0b
+p_st: .llong _stext - 0b
+
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index 9cc5a52..5ec56ff 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -254,8 +254,21 @@
/* If we are a Freescale core do a simple check so
* we dont have to keep adding cases in the future */
if (PVR_VER(pvr) & 0x8000) {
- maj = PVR_MAJ(pvr);
- min = PVR_MIN(pvr);
+ switch (PVR_VER(pvr)) {
+ case 0x8000: /* 7441/7450/7451, Voyager */
+ case 0x8001: /* 7445/7455, Apollo 6 */
+ case 0x8002: /* 7447/7457, Apollo 7 */
+ case 0x8003: /* 7447A, Apollo 7 PM */
+ case 0x8004: /* 7448, Apollo 8 */
+ case 0x800c: /* 7410, Nitro */
+ maj = ((pvr >> 8) & 0xF);
+ min = PVR_MIN(pvr);
+ break;
+ default: /* e500/book-e */
+ maj = PVR_MAJ(pvr);
+ min = PVR_MIN(pvr);
+ break;
+ }
} else {
switch (PVR_VER(pvr)) {
case 0x0020: /* 403 family */
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index 066e65c..c1a2762 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -111,7 +111,7 @@
* This is called very early on the boot process, after a minimal
* MMU environment has been set up but before MMU_init is called.
*/
-notrace void __init machine_init(unsigned long dt_ptr, unsigned long phys)
+notrace void __init machine_init(unsigned long dt_ptr)
{
/* Enable early debugging if any specified (see udbg.h) */
udbg_early_init();
@@ -209,23 +209,12 @@
#endif /* CONFIG_NVRAM */
-static DEFINE_PER_CPU(struct cpu, cpu_devices);
-
int __init ppc_init(void)
{
- int cpu;
-
/* clear the progress line */
if (ppc_md.progress)
ppc_md.progress(" ", 0xffff);
- /* register CPU devices */
- for_each_possible_cpu(cpu) {
- struct cpu *c = &per_cpu(cpu_devices, cpu);
- c->hotpluggable = 1;
- register_cpu(c, cpu);
- }
-
/* call platform init */
if (ppc_md.init != NULL) {
ppc_md.init();
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 8b25f51..843c0af 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -255,9 +255,11 @@
#endif /* CONFIG_SMP */
#if defined(CONFIG_SMP) || defined(CONFIG_KEXEC)
+extern unsigned long __secondary_hold_spinloop;
+extern void generic_secondary_smp_init(void);
+
void smp_release_cpus(void)
{
- extern unsigned long __secondary_hold_spinloop;
unsigned long *ptr;
DBG(" -> smp_release_cpus()\n");
@@ -266,12 +268,11 @@
* all now so they can start to spin on their individual paca
* spinloops. For non SMP kernels, the secondary cpus never get out
* of the common spinloop.
- * This is useless but harmless on iSeries, secondaries are already
- * waiting on their paca spinloops. */
+ */
ptr = (unsigned long *)((unsigned long)&__secondary_hold_spinloop
- PHYSICAL_START);
- *ptr = 1;
+ *ptr = __pa(generic_secondary_smp_init);
mb();
DBG(" <- smp_release_cpus()\n");
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index c27b10a..ff9f701 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -101,8 +101,7 @@
generic_smp_call_function_interrupt();
break;
case PPC_MSG_RESCHEDULE:
- /* XXX Do we have to do this? */
- set_need_resched();
+ /* we notice need_resched on exit */
break;
case PPC_MSG_CALL_FUNC_SINGLE:
generic_smp_call_function_single_interrupt();
diff --git a/arch/powerpc/kernel/swsusp_asm64.S b/arch/powerpc/kernel/swsusp_asm64.S
index e092c3c..86ac1d9 100644
--- a/arch/powerpc/kernel/swsusp_asm64.S
+++ b/arch/powerpc/kernel/swsusp_asm64.S
@@ -133,7 +133,7 @@
cmpdi r12,0
beq- nothing_to_copy
- li r15,512
+ li r15,PAGE_SIZE>>3
copyloop:
ld r13,pbe_address(r12)
ld r14,pbe_orig_address(r12)
diff --git a/arch/powerpc/kernel/sys_ppc32.c b/arch/powerpc/kernel/sys_ppc32.c
index d98634c..ff7de7b 100644
--- a/arch/powerpc/kernel/sys_ppc32.c
+++ b/arch/powerpc/kernel/sys_ppc32.c
@@ -107,14 +107,6 @@
return sys_sysfs((int)option, arg1, arg2);
}
-asmlinkage long compat_sys_pause(void)
-{
- current->state = TASK_INTERRUPTIBLE;
- schedule();
-
- return -ERESTARTNOHAND;
-}
-
static inline long get_ts32(struct timespec *o, struct compat_timeval __user *i)
{
long usec;
diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c
index 56d172d..86a2ffc 100644
--- a/arch/powerpc/kernel/sysfs.c
+++ b/arch/powerpc/kernel/sysfs.c
@@ -15,18 +15,24 @@
#include <asm/firmware.h>
#include <asm/hvcall.h>
#include <asm/prom.h>
-#include <asm/paca.h>
-#include <asm/lppaca.h>
#include <asm/machdep.h>
#include <asm/smp.h>
+#ifdef CONFIG_PPC64
+#include <asm/paca.h>
+#include <asm/lppaca.h>
+#endif
+
static DEFINE_PER_CPU(struct cpu, cpu_devices);
static DEFINE_PER_CPU(struct kobject *, cache_toplevel);
-/* SMT stuff */
+/*
+ * SMT snooze delay stuff, 64-bit only for now
+ */
-#ifdef CONFIG_PPC_MULTIPLATFORM
+#ifdef CONFIG_PPC64
+
/* Time in microseconds we delay before sleeping in the idle loop */
DEFINE_PER_CPU(unsigned long, smt_snooze_delay) = { 100 };
@@ -106,7 +112,7 @@
}
__setup("smt-snooze-delay=", setup_smt_snooze_delay);
-#endif /* CONFIG_PPC_MULTIPLATFORM */
+#endif /* CONFIG_PPC64 */
/*
* Enabling PMCs will slow partition context switch times so we only do
@@ -115,7 +121,7 @@
static DEFINE_PER_CPU(char, pmcs_enabled);
-void ppc64_enable_pmcs(void)
+void ppc_enable_pmcs(void)
{
/* Only need to enable them once */
if (__get_cpu_var(pmcs_enabled))
@@ -126,8 +132,9 @@
if (ppc_md.enable_pmcs)
ppc_md.enable_pmcs();
}
-EXPORT_SYMBOL(ppc64_enable_pmcs);
+EXPORT_SYMBOL(ppc_enable_pmcs);
+#if defined(CONFIG_6xx) || defined(CONFIG_PPC64)
/* XXX convert to rusty's on_one_cpu */
static unsigned long run_on_cpu(unsigned long cpu,
unsigned long (*func)(unsigned long),
@@ -146,6 +153,7 @@
return ret;
}
+#endif
#define SYSFS_PMCSETUP(NAME, ADDRESS) \
static unsigned long read_##NAME(unsigned long junk) \
@@ -154,7 +162,7 @@
} \
static unsigned long write_##NAME(unsigned long val) \
{ \
- ppc64_enable_pmcs(); \
+ ppc_enable_pmcs(); \
mtspr(ADDRESS, val); \
return 0; \
} \
@@ -184,28 +192,53 @@
* that are implemented on the current processor
*/
+#if defined(CONFIG_PPC64)
+#define HAS_PPC_PMC_CLASSIC 1
+#define HAS_PPC_PMC_IBM 1
+#define HAS_PPC_PMC_PA6T 1
+#elif defined(CONFIG_6xx)
+#define HAS_PPC_PMC_CLASSIC 1
+#define HAS_PPC_PMC_IBM 1
+#define HAS_PPC_PMC_G4 1
+#endif
+
+
+#ifdef HAS_PPC_PMC_CLASSIC
SYSFS_PMCSETUP(mmcr0, SPRN_MMCR0);
SYSFS_PMCSETUP(mmcr1, SPRN_MMCR1);
-SYSFS_PMCSETUP(mmcra, SPRN_MMCRA);
SYSFS_PMCSETUP(pmc1, SPRN_PMC1);
SYSFS_PMCSETUP(pmc2, SPRN_PMC2);
SYSFS_PMCSETUP(pmc3, SPRN_PMC3);
SYSFS_PMCSETUP(pmc4, SPRN_PMC4);
SYSFS_PMCSETUP(pmc5, SPRN_PMC5);
SYSFS_PMCSETUP(pmc6, SPRN_PMC6);
+
+#ifdef HAS_PPC_PMC_G4
+SYSFS_PMCSETUP(mmcr2, SPRN_MMCR2);
+#endif
+
+#ifdef CONFIG_PPC64
SYSFS_PMCSETUP(pmc7, SPRN_PMC7);
SYSFS_PMCSETUP(pmc8, SPRN_PMC8);
+
+SYSFS_PMCSETUP(mmcra, SPRN_MMCRA);
SYSFS_PMCSETUP(purr, SPRN_PURR);
SYSFS_PMCSETUP(spurr, SPRN_SPURR);
SYSFS_PMCSETUP(dscr, SPRN_DSCR);
+static SYSDEV_ATTR(mmcra, 0600, show_mmcra, store_mmcra);
+static SYSDEV_ATTR(spurr, 0600, show_spurr, NULL);
+static SYSDEV_ATTR(dscr, 0600, show_dscr, store_dscr);
+static SYSDEV_ATTR(purr, 0600, show_purr, store_purr);
+#endif /* CONFIG_PPC64 */
+
+#ifdef HAS_PPC_PMC_PA6T
SYSFS_PMCSETUP(pa6t_pmc0, SPRN_PA6T_PMC0);
SYSFS_PMCSETUP(pa6t_pmc1, SPRN_PA6T_PMC1);
SYSFS_PMCSETUP(pa6t_pmc2, SPRN_PA6T_PMC2);
SYSFS_PMCSETUP(pa6t_pmc3, SPRN_PA6T_PMC3);
SYSFS_PMCSETUP(pa6t_pmc4, SPRN_PA6T_PMC4);
SYSFS_PMCSETUP(pa6t_pmc5, SPRN_PA6T_PMC5);
-
#ifdef CONFIG_DEBUG_KERNEL
SYSFS_PMCSETUP(hid0, SPRN_HID0);
SYSFS_PMCSETUP(hid1, SPRN_HID1);
@@ -236,28 +269,37 @@
SYSFS_PMCSETUP(tsr2, SPRN_PA6T_TSR2);
SYSFS_PMCSETUP(tsr3, SPRN_PA6T_TSR3);
#endif /* CONFIG_DEBUG_KERNEL */
+#endif /* HAS_PPC_PMC_PA6T */
-static SYSDEV_ATTR(mmcra, 0600, show_mmcra, store_mmcra);
-static SYSDEV_ATTR(spurr, 0600, show_spurr, NULL);
-static SYSDEV_ATTR(dscr, 0600, show_dscr, store_dscr);
-static SYSDEV_ATTR(purr, 0600, show_purr, store_purr);
-
+#ifdef HAS_PPC_PMC_IBM
static struct sysdev_attribute ibm_common_attrs[] = {
_SYSDEV_ATTR(mmcr0, 0600, show_mmcr0, store_mmcr0),
_SYSDEV_ATTR(mmcr1, 0600, show_mmcr1, store_mmcr1),
};
+#endif /* HAS_PPC_PMC_G4 */
-static struct sysdev_attribute ibm_pmc_attrs[] = {
+#ifdef HAS_PPC_PMC_G4
+static struct sysdev_attribute g4_common_attrs[] = {
+ _SYSDEV_ATTR(mmcr0, 0600, show_mmcr0, store_mmcr0),
+ _SYSDEV_ATTR(mmcr1, 0600, show_mmcr1, store_mmcr1),
+ _SYSDEV_ATTR(mmcr2, 0600, show_mmcr2, store_mmcr2),
+};
+#endif /* HAS_PPC_PMC_G4 */
+
+static struct sysdev_attribute classic_pmc_attrs[] = {
_SYSDEV_ATTR(pmc1, 0600, show_pmc1, store_pmc1),
_SYSDEV_ATTR(pmc2, 0600, show_pmc2, store_pmc2),
_SYSDEV_ATTR(pmc3, 0600, show_pmc3, store_pmc3),
_SYSDEV_ATTR(pmc4, 0600, show_pmc4, store_pmc4),
_SYSDEV_ATTR(pmc5, 0600, show_pmc5, store_pmc5),
_SYSDEV_ATTR(pmc6, 0600, show_pmc6, store_pmc6),
+#ifdef CONFIG_PPC64
_SYSDEV_ATTR(pmc7, 0600, show_pmc7, store_pmc7),
_SYSDEV_ATTR(pmc8, 0600, show_pmc8, store_pmc8),
+#endif
};
+#ifdef HAS_PPC_PMC_PA6T
static struct sysdev_attribute pa6t_attrs[] = {
_SYSDEV_ATTR(mmcr0, 0600, show_mmcr0, store_mmcr0),
_SYSDEV_ATTR(mmcr1, 0600, show_mmcr1, store_mmcr1),
@@ -298,6 +340,8 @@
_SYSDEV_ATTR(tsr3, 0600, show_tsr3, store_tsr3),
#endif /* CONFIG_DEBUG_KERNEL */
};
+#endif /* HAS_PPC_PMC_PA6T */
+#endif /* HAS_PPC_PMC_CLASSIC */
struct cache_desc {
struct kobject kobj;
@@ -588,23 +632,36 @@
struct sysdev_attribute *attrs, *pmc_attrs;
int i, nattrs;
+#ifdef CONFIG_PPC64
if (!firmware_has_feature(FW_FEATURE_ISERIES) &&
cpu_has_feature(CPU_FTR_SMT))
sysdev_create_file(s, &attr_smt_snooze_delay);
+#endif
/* PMC stuff */
switch (cur_cpu_spec->pmc_type) {
+#ifdef HAS_PPC_PMC_IBM
case PPC_PMC_IBM:
attrs = ibm_common_attrs;
nattrs = sizeof(ibm_common_attrs) / sizeof(struct sysdev_attribute);
- pmc_attrs = ibm_pmc_attrs;
+ pmc_attrs = classic_pmc_attrs;
break;
+#endif /* HAS_PPC_PMC_IBM */
+#ifdef HAS_PPC_PMC_G4
+ case PPC_PMC_G4:
+ attrs = g4_common_attrs;
+ nattrs = sizeof(g4_common_attrs) / sizeof(struct sysdev_attribute);
+ pmc_attrs = classic_pmc_attrs;
+ break;
+#endif /* HAS_PPC_PMC_G4 */
+#ifdef HAS_PPC_PMC_PA6T
case PPC_PMC_PA6T:
/* PA Semi starts counting at PMC0 */
attrs = pa6t_attrs;
nattrs = sizeof(pa6t_attrs) / sizeof(struct sysdev_attribute);
pmc_attrs = NULL;
break;
+#endif /* HAS_PPC_PMC_PA6T */
default:
attrs = NULL;
nattrs = 0;
@@ -618,6 +675,7 @@
for (i = 0; i < cur_cpu_spec->num_pmcs; i++)
sysdev_create_file(s, &pmc_attrs[i]);
+#ifdef CONFIG_PPC64
if (cpu_has_feature(CPU_FTR_MMCRA))
sysdev_create_file(s, &attr_mmcra);
@@ -629,6 +687,7 @@
if (cpu_has_feature(CPU_FTR_DSCR))
sysdev_create_file(s, &attr_dscr);
+#endif /* CONFIG_PPC64 */
create_cache_info(s);
}
@@ -641,16 +700,9 @@
int cpu = sysdev->id;
cache_desc = per_cpu(cache_desc, cpu);
- if (cache_desc != NULL) {
- sysfs_remove_file(&cache_desc->kobj, &cache_size_attr.attr);
- sysfs_remove_file(&cache_desc->kobj, &cache_line_size_attr.attr);
- sysfs_remove_file(&cache_desc->kobj, &cache_type_attr.attr);
- sysfs_remove_file(&cache_desc->kobj, &cache_level_attr.attr);
- sysfs_remove_file(&cache_desc->kobj, &cache_nr_sets_attr.attr);
- sysfs_remove_file(&cache_desc->kobj, &cache_assoc_attr.attr);
-
+ if (cache_desc != NULL)
kobject_put(&cache_desc->kobj);
- }
+
cache_toplevel = per_cpu(cache_toplevel, cpu);
if (cache_toplevel != NULL)
kobject_put(cache_toplevel);
@@ -671,17 +723,28 @@
/* PMC stuff */
switch (cur_cpu_spec->pmc_type) {
+#ifdef HAS_PPC_PMC_IBM
case PPC_PMC_IBM:
attrs = ibm_common_attrs;
nattrs = sizeof(ibm_common_attrs) / sizeof(struct sysdev_attribute);
- pmc_attrs = ibm_pmc_attrs;
+ pmc_attrs = classic_pmc_attrs;
break;
+#endif /* HAS_PPC_PMC_IBM */
+#ifdef HAS_PPC_PMC_G4
+ case PPC_PMC_G4:
+ attrs = g4_common_attrs;
+ nattrs = sizeof(g4_common_attrs) / sizeof(struct sysdev_attribute);
+ pmc_attrs = classic_pmc_attrs;
+ break;
+#endif /* HAS_PPC_PMC_G4 */
+#ifdef HAS_PPC_PMC_PA6T
case PPC_PMC_PA6T:
/* PA Semi starts counting at PMC0 */
attrs = pa6t_attrs;
nattrs = sizeof(pa6t_attrs) / sizeof(struct sysdev_attribute);
pmc_attrs = NULL;
break;
+#endif /* HAS_PPC_PMC_PA6T */
default:
attrs = NULL;
nattrs = 0;
@@ -695,6 +758,7 @@
for (i = 0; i < cur_cpu_spec->num_pmcs; i++)
sysdev_remove_file(s, &pmc_attrs[i]);
+#ifdef CONFIG_PPC64
if (cpu_has_feature(CPU_FTR_MMCRA))
sysdev_remove_file(s, &attr_mmcra);
@@ -706,6 +770,7 @@
if (cpu_has_feature(CPU_FTR_DSCR))
sysdev_remove_file(s, &attr_dscr);
+#endif /* CONFIG_PPC64 */
remove_cache_info(s);
}
diff --git a/arch/powerpc/kernel/vio.c b/arch/powerpc/kernel/vio.c
index 2750fba..434c92a 100644
--- a/arch/powerpc/kernel/vio.c
+++ b/arch/powerpc/kernel/vio.c
@@ -1232,7 +1232,7 @@
else
viodev->dev.archdata.dma_ops = &dma_iommu_ops;
viodev->dev.archdata.dma_data = vio_build_iommu_table(viodev);
- viodev->dev.archdata.numa_node = of_node_to_nid(of_node);
+ set_dev_node(&viodev->dev, of_node_to_nid(of_node));
/* init generic 'struct device' fields: */
viodev->dev.parent = &vio_bus_device.dev;
diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S
index 9f6c1ca..b39c27e 100644
--- a/arch/powerpc/kernel/vmlinux.lds.S
+++ b/arch/powerpc/kernel/vmlinux.lds.S
@@ -187,6 +187,24 @@
*(.machine.desc)
__machine_desc_end = . ;
}
+ . = ALIGN(8);
+ .dynsym : AT(ADDR(.dynsym) - LOAD_OFFSET) { *(.dynsym) }
+ .dynstr : AT(ADDR(.dynstr) - LOAD_OFFSET) { *(.dynstr) }
+ .dynamic : AT(ADDR(.dynamic) - LOAD_OFFSET)
+ {
+ __dynamic_start = .;
+ *(.dynamic)
+ }
+ .hash : AT(ADDR(.hash) - LOAD_OFFSET) { *(.hash) }
+ .interp : AT(ADDR(.interp) - LOAD_OFFSET) { *(.interp) }
+ .rela.dyn : AT(ADDR(.rela.dyn) - LOAD_OFFSET)
+ {
+ __rela_dyn_start = .;
+ *(.rela*)
+ }
+
+ /* Fake ELF header containing RPA note; for addnote */
+ .fakeelf : AT(ADDR(.fakeelf) - LOAD_OFFSET) { *(.fakeelf) }
/* freed after init ends here */
. = ALIGN(PAGE_SIZE);
diff --git a/arch/powerpc/lib/copypage_64.S b/arch/powerpc/lib/copypage_64.S
index f9837f4..75f3267 100644
--- a/arch/powerpc/lib/copypage_64.S
+++ b/arch/powerpc/lib/copypage_64.S
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2002 Paul Mackerras, IBM Corp.
+ * Copyright (C) 2008 Mark Nelson, IBM Corp.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -8,112 +8,100 @@
*/
#include <asm/processor.h>
#include <asm/ppc_asm.h>
+#include <asm/asm-offsets.h>
+
+ .section ".toc","aw"
+PPC64_CACHES:
+ .tc ppc64_caches[TC],ppc64_caches
+ .section ".text"
+
_GLOBAL(copy_4K_page)
- std r31,-8(1)
- std r30,-16(1)
- std r29,-24(1)
- std r28,-32(1)
- std r27,-40(1)
- std r26,-48(1)
- std r25,-56(1)
- std r24,-64(1)
- std r23,-72(1)
- std r22,-80(1)
- std r21,-88(1)
- std r20,-96(1)
- li r5,4096/32 - 1
+ li r5,4096 /* 4K page size */
+BEGIN_FTR_SECTION
+ ld r10,PPC64_CACHES@toc(r2)
+ lwz r11,DCACHEL1LOGLINESIZE(r10) /* log2 of cache line size */
+ lwz r12,DCACHEL1LINESIZE(r10) /* get cache line size */
+ li r9,0
+ srd r8,r5,r11
+
+ mtctr r8
+setup:
+ dcbt r9,r4
+ dcbz r9,r3
+ add r9,r9,r12
+ bdnz setup
+END_FTR_SECTION_IFSET(CPU_FTR_CP_USE_DCBTZ)
addi r3,r3,-8
- li r12,5
-0: addi r5,r5,-24
- mtctr r12
- ld r22,640(4)
- ld r21,512(4)
- ld r20,384(4)
- ld r11,256(4)
- ld r9,128(4)
- ld r7,0(4)
- ld r25,648(4)
- ld r24,520(4)
- ld r23,392(4)
- ld r10,264(4)
- ld r8,136(4)
- ldu r6,8(4)
- cmpwi r5,24
-1: std r22,648(3)
- std r21,520(3)
- std r20,392(3)
- std r11,264(3)
- std r9,136(3)
- std r7,8(3)
- ld r28,648(4)
- ld r27,520(4)
- ld r26,392(4)
- ld r31,264(4)
- ld r30,136(4)
- ld r29,8(4)
- std r25,656(3)
- std r24,528(3)
- std r23,400(3)
- std r10,272(3)
- std r8,144(3)
- std r6,16(3)
- ld r22,656(4)
- ld r21,528(4)
- ld r20,400(4)
- ld r11,272(4)
- ld r9,144(4)
- ld r7,16(4)
- std r28,664(3)
- std r27,536(3)
- std r26,408(3)
- std r31,280(3)
- std r30,152(3)
- stdu r29,24(3)
- ld r25,664(4)
- ld r24,536(4)
- ld r23,408(4)
- ld r10,280(4)
- ld r8,152(4)
- ldu r6,24(4)
+ srdi r8,r5,7 /* page is copied in 128 byte strides */
+ addi r8,r8,-1 /* one stride copied outside loop */
+
+ mtctr r8
+
+ ld r5,0(r4)
+ ld r6,8(r4)
+ ld r7,16(r4)
+ ldu r8,24(r4)
+1: std r5,8(r3)
+ ld r9,8(r4)
+ std r6,16(r3)
+ ld r10,16(r4)
+ std r7,24(r3)
+ ld r11,24(r4)
+ std r8,32(r3)
+ ld r12,32(r4)
+ std r9,40(r3)
+ ld r5,40(r4)
+ std r10,48(r3)
+ ld r6,48(r4)
+ std r11,56(r3)
+ ld r7,56(r4)
+ std r12,64(r3)
+ ld r8,64(r4)
+ std r5,72(r3)
+ ld r9,72(r4)
+ std r6,80(r3)
+ ld r10,80(r4)
+ std r7,88(r3)
+ ld r11,88(r4)
+ std r8,96(r3)
+ ld r12,96(r4)
+ std r9,104(r3)
+ ld r5,104(r4)
+ std r10,112(r3)
+ ld r6,112(r4)
+ std r11,120(r3)
+ ld r7,120(r4)
+ stdu r12,128(r3)
+ ldu r8,128(r4)
bdnz 1b
- std r22,648(3)
- std r21,520(3)
- std r20,392(3)
- std r11,264(3)
- std r9,136(3)
- std r7,8(3)
- addi r4,r4,640
- addi r3,r3,648
- bge 0b
- mtctr r5
- ld r7,0(4)
- ld r8,8(4)
- ldu r9,16(4)
-3: ld r10,8(4)
- std r7,8(3)
- ld r7,16(4)
- std r8,16(3)
- ld r8,24(4)
- std r9,24(3)
- ldu r9,32(4)
- stdu r10,32(3)
- bdnz 3b
-4: ld r10,8(4)
- std r7,8(3)
- std r8,16(3)
- std r9,24(3)
- std r10,32(3)
-9: ld r20,-96(1)
- ld r21,-88(1)
- ld r22,-80(1)
- ld r23,-72(1)
- ld r24,-64(1)
- ld r25,-56(1)
- ld r26,-48(1)
- ld r27,-40(1)
- ld r28,-32(1)
- ld r29,-24(1)
- ld r30,-16(1)
- ld r31,-8(1)
+
+ std r5,8(r3)
+ ld r9,8(r4)
+ std r6,16(r3)
+ ld r10,16(r4)
+ std r7,24(r3)
+ ld r11,24(r4)
+ std r8,32(r3)
+ ld r12,32(r4)
+ std r9,40(r3)
+ ld r5,40(r4)
+ std r10,48(r3)
+ ld r6,48(r4)
+ std r11,56(r3)
+ ld r7,56(r4)
+ std r12,64(r3)
+ ld r8,64(r4)
+ std r5,72(r3)
+ ld r9,72(r4)
+ std r6,80(r3)
+ ld r10,80(r4)
+ std r7,88(r3)
+ ld r11,88(r4)
+ std r8,96(r3)
+ ld r12,96(r4)
+ std r9,104(r3)
+ std r10,112(r3)
+ std r11,120(r3)
+ std r12,128(r3)
blr
diff --git a/arch/powerpc/lib/dma-noncoherent.c b/arch/powerpc/lib/dma-noncoherent.c
index 5d83907..31734c0 100644
--- a/arch/powerpc/lib/dma-noncoherent.c
+++ b/arch/powerpc/lib/dma-noncoherent.c
@@ -203,7 +203,7 @@
/*
* Set the "dma handle"
*/
- *handle = page_to_bus(page);
+ *handle = page_to_phys(page);
do {
BUG_ON(!pte_none(*pte));
diff --git a/arch/powerpc/math-emu/Makefile b/arch/powerpc/math-emu/Makefile
index 29bc912..03aa98d 100644
--- a/arch/powerpc/math-emu/Makefile
+++ b/arch/powerpc/math-emu/Makefile
@@ -4,13 +4,14 @@
obj-$(CONFIG_MATH_EMULATION) += fabs.o fadd.o fadds.o fcmpo.o fcmpu.o \
fctiw.o fctiwz.o fdiv.o fdivs.o \
fmadd.o fmadds.o fmsub.o fmsubs.o \
- fmul.o fmuls.o fnabs.o fneg.o types.o \
+ fmul.o fmuls.o fnabs.o fneg.o \
fnmadd.o fnmadds.o fnmsub.o fnmsubs.o \
fres.o frsp.o frsqrte.o fsel.o lfs.o \
fsqrt.o fsqrts.o fsub.o fsubs.o \
mcrfs.o mffs.o mtfsb0.o mtfsb1.o \
- mtfsf.o mtfsfi.o stfiwx.o stfs.o \
- udivmodti4.o
+ mtfsf.o mtfsfi.o stfiwx.o stfs.o
CFLAGS_fabs.o = -fno-builtin-fabs
CFLAGS_math.o = -fno-builtin-fabs
+
+EXTRA_CFLAGS = -I. -Iinclude/math-emu -w
diff --git a/arch/powerpc/math-emu/double.h b/arch/powerpc/math-emu/double.h
deleted file mode 100644
index ffba8b6..0000000
--- a/arch/powerpc/math-emu/double.h
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- * Definitions for IEEE Double Precision
- */
-
-#if _FP_W_TYPE_SIZE < 32
-#error "Here's a nickel kid. Go buy yourself a real computer."
-#endif
-
-#if _FP_W_TYPE_SIZE < 64
-#define _FP_FRACTBITS_D (2 * _FP_W_TYPE_SIZE)
-#else
-#define _FP_FRACTBITS_D _FP_W_TYPE_SIZE
-#endif
-
-#define _FP_FRACBITS_D 53
-#define _FP_FRACXBITS_D (_FP_FRACTBITS_D - _FP_FRACBITS_D)
-#define _FP_WFRACBITS_D (_FP_WORKBITS + _FP_FRACBITS_D)
-#define _FP_WFRACXBITS_D (_FP_FRACTBITS_D - _FP_WFRACBITS_D)
-#define _FP_EXPBITS_D 11
-#define _FP_EXPBIAS_D 1023
-#define _FP_EXPMAX_D 2047
-
-#define _FP_QNANBIT_D \
- ((_FP_W_TYPE)1 << ((_FP_FRACBITS_D-2) % _FP_W_TYPE_SIZE))
-#define _FP_IMPLBIT_D \
- ((_FP_W_TYPE)1 << ((_FP_FRACBITS_D-1) % _FP_W_TYPE_SIZE))
-#define _FP_OVERFLOW_D \
- ((_FP_W_TYPE)1 << (_FP_WFRACBITS_D % _FP_W_TYPE_SIZE))
-
-#if _FP_W_TYPE_SIZE < 64
-
-union _FP_UNION_D
-{
- double flt;
- struct {
-#if __BYTE_ORDER == __BIG_ENDIAN
- unsigned sign : 1;
- unsigned exp : _FP_EXPBITS_D;
- unsigned frac1 : _FP_FRACBITS_D - (_FP_IMPLBIT_D != 0) - _FP_W_TYPE_SIZE;
- unsigned frac0 : _FP_W_TYPE_SIZE;
-#else
- unsigned frac0 : _FP_W_TYPE_SIZE;
- unsigned frac1 : _FP_FRACBITS_D - (_FP_IMPLBIT_D != 0) - _FP_W_TYPE_SIZE;
- unsigned exp : _FP_EXPBITS_D;
- unsigned sign : 1;
-#endif
- } bits __attribute__((packed));
-};
-
-#define FP_DECL_D(X) _FP_DECL(2,X)
-#define FP_UNPACK_RAW_D(X,val) _FP_UNPACK_RAW_2(D,X,val)
-#define FP_PACK_RAW_D(val,X) _FP_PACK_RAW_2(D,val,X)
-
-#define FP_UNPACK_D(X,val) \
- do { \
- _FP_UNPACK_RAW_2(D,X,val); \
- _FP_UNPACK_CANONICAL(D,2,X); \
- } while (0)
-
-#define FP_PACK_D(val,X) \
- do { \
- _FP_PACK_CANONICAL(D,2,X); \
- _FP_PACK_RAW_2(D,val,X); \
- } while (0)
-
-#define FP_NEG_D(R,X) _FP_NEG(D,2,R,X)
-#define FP_ADD_D(R,X,Y) _FP_ADD(D,2,R,X,Y)
-#define FP_SUB_D(R,X,Y) _FP_SUB(D,2,R,X,Y)
-#define FP_MUL_D(R,X,Y) _FP_MUL(D,2,R,X,Y)
-#define FP_DIV_D(R,X,Y) _FP_DIV(D,2,R,X,Y)
-#define FP_SQRT_D(R,X) _FP_SQRT(D,2,R,X)
-
-#define FP_CMP_D(r,X,Y,un) _FP_CMP(D,2,r,X,Y,un)
-#define FP_CMP_EQ_D(r,X,Y) _FP_CMP_EQ(D,2,r,X,Y)
-
-#define FP_TO_INT_D(r,X,rsz,rsg) _FP_TO_INT(D,2,r,X,rsz,rsg)
-#define FP_FROM_INT_D(X,r,rs,rt) _FP_FROM_INT(D,2,X,r,rs,rt)
-
-#else
-
-union _FP_UNION_D
-{
- double flt;
- struct {
-#if __BYTE_ORDER == __BIG_ENDIAN
- unsigned sign : 1;
- unsigned exp : _FP_EXPBITS_D;
- unsigned long frac : _FP_FRACBITS_D - (_FP_IMPLBIT_D != 0);
-#else
- unsigned long frac : _FP_FRACBITS_D - (_FP_IMPLBIT_D != 0);
- unsigned exp : _FP_EXPBITS_D;
- unsigned sign : 1;
-#endif
- } bits __attribute__((packed));
-};
-
-#define FP_DECL_D(X) _FP_DECL(1,X)
-#define FP_UNPACK_RAW_D(X,val) _FP_UNPACK_RAW_1(D,X,val)
-#define FP_PACK_RAW_D(val,X) _FP_PACK_RAW_1(D,val,X)
-
-#define FP_UNPACK_D(X,val) \
- do { \
- _FP_UNPACK_RAW_1(D,X,val); \
- _FP_UNPACK_CANONICAL(D,1,X); \
- } while (0)
-
-#define FP_PACK_D(val,X) \
- do { \
- _FP_PACK_CANONICAL(D,1,X); \
- _FP_PACK_RAW_1(D,val,X); \
- } while (0)
-
-#define FP_NEG_D(R,X) _FP_NEG(D,1,R,X)
-#define FP_ADD_D(R,X,Y) _FP_ADD(D,1,R,X,Y)
-#define FP_SUB_D(R,X,Y) _FP_SUB(D,1,R,X,Y)
-#define FP_MUL_D(R,X,Y) _FP_MUL(D,1,R,X,Y)
-#define FP_DIV_D(R,X,Y) _FP_DIV(D,1,R,X,Y)
-#define FP_SQRT_D(R,X) _FP_SQRT(D,1,R,X)
-
-/* The implementation of _FP_MUL_D and _FP_DIV_D should be chosen by
- the target machine. */
-
-#define FP_CMP_D(r,X,Y,un) _FP_CMP(D,1,r,X,Y,un)
-#define FP_CMP_EQ_D(r,X,Y) _FP_CMP_EQ(D,1,r,X,Y)
-
-#define FP_TO_INT_D(r,X,rsz,rsg) _FP_TO_INT(D,1,r,X,rsz,rsg)
-#define FP_FROM_INT_D(X,r,rs,rt) _FP_FROM_INT(D,1,X,r,rs,rt)
-
-#endif /* W_TYPE_SIZE < 64 */
diff --git a/arch/powerpc/math-emu/fadd.c b/arch/powerpc/math-emu/fadd.c
index 7befbbf..04d3b4a 100644
--- a/arch/powerpc/math-emu/fadd.c
+++ b/arch/powerpc/math-emu/fadd.c
@@ -2,8 +2,9 @@
#include <linux/errno.h>
#include <asm/uaccess.h>
-#include "soft-fp.h"
-#include "double.h"
+#include <asm/sfp-machine.h>
+#include <math-emu/soft-fp.h>
+#include <math-emu/double.h>
int
fadd(void *frD, void *frA, void *frB)
@@ -11,28 +12,28 @@
FP_DECL_D(A);
FP_DECL_D(B);
FP_DECL_D(R);
+ FP_DECL_EX;
int ret = 0;
#ifdef DEBUG
printk("%s: %p %p %p\n", __func__, frD, frA, frB);
#endif
- __FP_UNPACK_D(A, frA);
- __FP_UNPACK_D(B, frB);
+ FP_UNPACK_DP(A, frA);
+ FP_UNPACK_DP(B, frB);
#ifdef DEBUG
printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c);
printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c);
#endif
- if (A_s != B_s && A_c == FP_CLS_INF && B_c == FP_CLS_INF)
- ret |= EFLAG_VXISI;
-
FP_ADD_D(R, A, B);
#ifdef DEBUG
printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c);
#endif
- return (ret | __FP_PACK_D(frD, R));
+ __FP_PACK_D(frD, R);
+
+ return FP_CUR_EXCEPTIONS;
}
diff --git a/arch/powerpc/math-emu/fadds.c b/arch/powerpc/math-emu/fadds.c
index 2b346b3..5930f40 100644
--- a/arch/powerpc/math-emu/fadds.c
+++ b/arch/powerpc/math-emu/fadds.c
@@ -2,9 +2,10 @@
#include <linux/errno.h>
#include <asm/uaccess.h>
-#include "soft-fp.h"
-#include "double.h"
-#include "single.h"
+#include <asm/sfp-machine.h>
+#include <math-emu/soft-fp.h>
+#include <math-emu/double.h>
+#include <math-emu/single.h>
int
fadds(void *frD, void *frA, void *frB)
@@ -12,28 +13,27 @@
FP_DECL_D(A);
FP_DECL_D(B);
FP_DECL_D(R);
- int ret = 0;
+ FP_DECL_EX;
#ifdef DEBUG
printk("%s: %p %p %p\n", __func__, frD, frA, frB);
#endif
- __FP_UNPACK_D(A, frA);
- __FP_UNPACK_D(B, frB);
+ FP_UNPACK_DP(A, frA);
+ FP_UNPACK_DP(B, frB);
#ifdef DEBUG
printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c);
printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c);
#endif
- if (A_s != B_s && A_c == FP_CLS_INF && B_c == FP_CLS_INF)
- ret |= EFLAG_VXISI;
-
FP_ADD_D(R, A, B);
#ifdef DEBUG
printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c);
#endif
- return (ret | __FP_PACK_DS(frD, R));
+ __FP_PACK_DS(frD, R);
+
+ return FP_CUR_EXCEPTIONS;
}
diff --git a/arch/powerpc/math-emu/fcmpo.c b/arch/powerpc/math-emu/fcmpo.c
index 36d6890..b5dc449 100644
--- a/arch/powerpc/math-emu/fcmpo.c
+++ b/arch/powerpc/math-emu/fcmpo.c
@@ -2,14 +2,16 @@
#include <linux/errno.h>
#include <asm/uaccess.h>
-#include "soft-fp.h"
-#include "double.h"
+#include <asm/sfp-machine.h>
+#include <math-emu/soft-fp.h>
+#include <math-emu/double.h>
int
fcmpo(u32 *ccr, int crfD, void *frA, void *frB)
{
FP_DECL_D(A);
FP_DECL_D(B);
+ FP_DECL_EX;
int code[4] = { (1 << 3), (1 << 1), (1 << 2), (1 << 0) };
long cmp;
int ret = 0;
@@ -18,8 +20,8 @@
printk("%s: %p (%08x) %d %p %p\n", __func__, ccr, *ccr, crfD, frA, frB);
#endif
- __FP_UNPACK_D(A, frA);
- __FP_UNPACK_D(B, frB);
+ FP_UNPACK_DP(A, frA);
+ FP_UNPACK_DP(B, frB);
#ifdef DEBUG
printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c);
diff --git a/arch/powerpc/math-emu/fcmpu.c b/arch/powerpc/math-emu/fcmpu.c
index 53d93894..d4fb1ba 100644
--- a/arch/powerpc/math-emu/fcmpu.c
+++ b/arch/powerpc/math-emu/fcmpu.c
@@ -2,14 +2,16 @@
#include <linux/errno.h>
#include <asm/uaccess.h>
-#include "soft-fp.h"
-#include "double.h"
+#include <asm/sfp-machine.h>
+#include <math-emu/soft-fp.h>
+#include <math-emu/double.h>
int
fcmpu(u32 *ccr, int crfD, void *frA, void *frB)
{
FP_DECL_D(A);
FP_DECL_D(B);
+ FP_DECL_EX;
int code[4] = { (1 << 3), (1 << 1), (1 << 2), (1 << 0) };
long cmp;
@@ -17,8 +19,8 @@
printk("%s: %p (%08x) %d %p %p\n", __func__, ccr, *ccr, crfD, frA, frB);
#endif
- __FP_UNPACK_D(A, frA);
- __FP_UNPACK_D(B, frB);
+ FP_UNPACK_DP(A, frA);
+ FP_UNPACK_DP(B, frB);
#ifdef DEBUG
printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c);
diff --git a/arch/powerpc/math-emu/fctiw.c b/arch/powerpc/math-emu/fctiw.c
index fcd7a95..f694440 100644
--- a/arch/powerpc/math-emu/fctiw.c
+++ b/arch/powerpc/math-emu/fctiw.c
@@ -2,16 +2,18 @@
#include <linux/errno.h>
#include <asm/uaccess.h>
-#include "soft-fp.h"
-#include "double.h"
+#include <asm/sfp-machine.h>
+#include <math-emu/soft-fp.h>
+#include <math-emu/double.h>
int
fctiw(u32 *frD, void *frB)
{
FP_DECL_D(B);
+ FP_DECL_EX;
unsigned int r;
- __FP_UNPACK_D(B, frB);
+ FP_UNPACK_DP(B, frB);
FP_TO_INT_D(r, B, 32, 1);
frD[1] = r;
diff --git a/arch/powerpc/math-emu/fctiwz.c b/arch/powerpc/math-emu/fctiwz.c
index 1514d59..71e782f 100644
--- a/arch/powerpc/math-emu/fctiwz.c
+++ b/arch/powerpc/math-emu/fctiwz.c
@@ -2,13 +2,15 @@
#include <linux/errno.h>
#include <asm/uaccess.h>
-#include "soft-fp.h"
-#include "double.h"
+#include <asm/sfp-machine.h>
+#include <math-emu/soft-fp.h>
+#include <math-emu/double.h>
int
fctiwz(u32 *frD, void *frB)
{
FP_DECL_D(B);
+ FP_DECL_EX;
u32 fpscr;
unsigned int r;
@@ -16,7 +18,7 @@
__FPU_FPSCR &= ~(3);
__FPU_FPSCR |= FP_RND_ZERO;
- __FP_UNPACK_D(B, frB);
+ FP_UNPACK_DP(B, frB);
FP_TO_INT_D(r, B, 32, 1);
frD[1] = r;
diff --git a/arch/powerpc/math-emu/fdiv.c b/arch/powerpc/math-emu/fdiv.c
index 18a20fe..2db1509 100644
--- a/arch/powerpc/math-emu/fdiv.c
+++ b/arch/powerpc/math-emu/fdiv.c
@@ -2,8 +2,9 @@
#include <linux/errno.h>
#include <asm/uaccess.h>
-#include "soft-fp.h"
-#include "double.h"
+#include <asm/sfp-machine.h>
+#include <math-emu/soft-fp.h>
+#include <math-emu/double.h>
int
fdiv(void *frD, void *frA, void *frB)
@@ -11,14 +12,15 @@
FP_DECL_D(A);
FP_DECL_D(B);
FP_DECL_D(R);
+ FP_DECL_EX;
int ret = 0;
#ifdef DEBUG
printk("%s: %p %p %p\n", __func__, frD, frA, frB);
#endif
- __FP_UNPACK_D(A, frA);
- __FP_UNPACK_D(B, frB);
+ FP_UNPACK_DP(A, frA);
+ FP_UNPACK_DP(B, frB);
#ifdef DEBUG
printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c);
@@ -49,5 +51,7 @@
printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c);
#endif
- return (ret | __FP_PACK_D(frD, R));
+ __FP_PACK_D(frD, R);
+
+ return FP_CUR_EXCEPTIONS;
}
diff --git a/arch/powerpc/math-emu/fdivs.c b/arch/powerpc/math-emu/fdivs.c
index 24feed6..797f6a9 100644
--- a/arch/powerpc/math-emu/fdivs.c
+++ b/arch/powerpc/math-emu/fdivs.c
@@ -2,9 +2,10 @@
#include <linux/errno.h>
#include <asm/uaccess.h>
-#include "soft-fp.h"
-#include "double.h"
-#include "single.h"
+#include <asm/sfp-machine.h>
+#include <math-emu/soft-fp.h>
+#include <math-emu/double.h>
+#include <math-emu/single.h>
int
fdivs(void *frD, void *frA, void *frB)
@@ -12,14 +13,15 @@
FP_DECL_D(A);
FP_DECL_D(B);
FP_DECL_D(R);
+ FP_DECL_EX;
int ret = 0;
#ifdef DEBUG
printk("%s: %p %p %p\n", __func__, frD, frA, frB);
#endif
- __FP_UNPACK_D(A, frA);
- __FP_UNPACK_D(B, frB);
+ FP_UNPACK_DP(A, frA);
+ FP_UNPACK_DP(B, frB);
#ifdef DEBUG
printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c);
@@ -51,5 +53,7 @@
printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c);
#endif
- return (ret | __FP_PACK_DS(frD, R));
+ __FP_PACK_DS(frD, R);
+
+ return FP_CUR_EXCEPTIONS;
}
diff --git a/arch/powerpc/math-emu/fmadd.c b/arch/powerpc/math-emu/fmadd.c
index dedb465..925313a 100644
--- a/arch/powerpc/math-emu/fmadd.c
+++ b/arch/powerpc/math-emu/fmadd.c
@@ -2,8 +2,9 @@
#include <linux/errno.h>
#include <asm/uaccess.h>
-#include "soft-fp.h"
-#include "double.h"
+#include <asm/sfp-machine.h>
+#include <math-emu/soft-fp.h>
+#include <math-emu/double.h>
int
fmadd(void *frD, void *frA, void *frB, void *frC)
@@ -13,15 +14,16 @@
FP_DECL_D(B);
FP_DECL_D(C);
FP_DECL_D(T);
+ FP_DECL_EX;
int ret = 0;
#ifdef DEBUG
printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
#endif
- __FP_UNPACK_D(A, frA);
- __FP_UNPACK_D(B, frB);
- __FP_UNPACK_D(C, frC);
+ FP_UNPACK_DP(A, frA);
+ FP_UNPACK_DP(B, frB);
+ FP_UNPACK_DP(C, frC);
#ifdef DEBUG
printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c);
@@ -44,5 +46,7 @@
printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c);
#endif
- return (ret | __FP_PACK_D(frD, R));
+ __FP_PACK_D(frD, R);
+
+ return FP_CUR_EXCEPTIONS;
}
diff --git a/arch/powerpc/math-emu/fmadds.c b/arch/powerpc/math-emu/fmadds.c
index 6bbb56d..aea80ef 100644
--- a/arch/powerpc/math-emu/fmadds.c
+++ b/arch/powerpc/math-emu/fmadds.c
@@ -2,9 +2,10 @@
#include <linux/errno.h>
#include <asm/uaccess.h>
-#include "soft-fp.h"
-#include "double.h"
-#include "single.h"
+#include <asm/sfp-machine.h>
+#include <math-emu/soft-fp.h>
+#include <math-emu/double.h>
+#include <math-emu/single.h>
int
fmadds(void *frD, void *frA, void *frB, void *frC)
@@ -14,15 +15,16 @@
FP_DECL_D(B);
FP_DECL_D(C);
FP_DECL_D(T);
+ FP_DECL_EX;
int ret = 0;
#ifdef DEBUG
printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
#endif
- __FP_UNPACK_D(A, frA);
- __FP_UNPACK_D(B, frB);
- __FP_UNPACK_D(C, frC);
+ FP_UNPACK_DP(A, frA);
+ FP_UNPACK_DP(B, frB);
+ FP_UNPACK_DP(C, frC);
#ifdef DEBUG
printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c);
@@ -45,5 +47,7 @@
printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c);
#endif
- return (ret | __FP_PACK_DS(frD, R));
+ __FP_PACK_DS(frD, R);
+
+ return FP_CUR_EXCEPTIONS;
}
diff --git a/arch/powerpc/math-emu/fmsub.c b/arch/powerpc/math-emu/fmsub.c
index f311e2c..a644d52 100644
--- a/arch/powerpc/math-emu/fmsub.c
+++ b/arch/powerpc/math-emu/fmsub.c
@@ -2,8 +2,9 @@
#include <linux/errno.h>
#include <asm/uaccess.h>
-#include "soft-fp.h"
-#include "double.h"
+#include <asm/sfp-machine.h>
+#include <math-emu/soft-fp.h>
+#include <math-emu/double.h>
int
fmsub(void *frD, void *frA, void *frB, void *frC)
@@ -13,15 +14,16 @@
FP_DECL_D(B);
FP_DECL_D(C);
FP_DECL_D(T);
+ FP_DECL_EX;
int ret = 0;
#ifdef DEBUG
printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
#endif
- __FP_UNPACK_D(A, frA);
- __FP_UNPACK_D(B, frB);
- __FP_UNPACK_D(C, frC);
+ FP_UNPACK_DP(A, frA);
+ FP_UNPACK_DP(B, frB);
+ FP_UNPACK_DP(C, frC);
#ifdef DEBUG
printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c);
@@ -47,5 +49,7 @@
printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c);
#endif
- return (ret | __FP_PACK_D(frD, R));
+ __FP_PACK_D(frD, R);
+
+ return FP_CUR_EXCEPTIONS;
}
diff --git a/arch/powerpc/math-emu/fmsubs.c b/arch/powerpc/math-emu/fmsubs.c
index 81a716d..2fdeeb9 100644
--- a/arch/powerpc/math-emu/fmsubs.c
+++ b/arch/powerpc/math-emu/fmsubs.c
@@ -2,9 +2,10 @@
#include <linux/errno.h>
#include <asm/uaccess.h>
-#include "soft-fp.h"
-#include "double.h"
-#include "single.h"
+#include <asm/sfp-machine.h>
+#include <math-emu/soft-fp.h>
+#include <math-emu/double.h>
+#include <math-emu/single.h>
int
fmsubs(void *frD, void *frA, void *frB, void *frC)
@@ -14,15 +15,16 @@
FP_DECL_D(B);
FP_DECL_D(C);
FP_DECL_D(T);
+ FP_DECL_EX;
int ret = 0;
#ifdef DEBUG
printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
#endif
- __FP_UNPACK_D(A, frA);
- __FP_UNPACK_D(B, frB);
- __FP_UNPACK_D(C, frC);
+ FP_UNPACK_DP(A, frA);
+ FP_UNPACK_DP(B, frB);
+ FP_UNPACK_DP(C, frC);
#ifdef DEBUG
printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c);
@@ -48,5 +50,7 @@
printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c);
#endif
- return (ret | __FP_PACK_DS(frD, R));
+ __FP_PACK_DS(frD, R);
+
+ return FP_CUR_EXCEPTIONS;
}
diff --git a/arch/powerpc/math-emu/fmul.c b/arch/powerpc/math-emu/fmul.c
index 2f3d327..391fd17 100644
--- a/arch/powerpc/math-emu/fmul.c
+++ b/arch/powerpc/math-emu/fmul.c
@@ -2,8 +2,9 @@
#include <linux/errno.h>
#include <asm/uaccess.h>
-#include "soft-fp.h"
-#include "double.h"
+#include <asm/sfp-machine.h>
+#include <math-emu/soft-fp.h>
+#include <math-emu/double.h>
int
fmul(void *frD, void *frA, void *frB)
@@ -11,14 +12,15 @@
FP_DECL_D(A);
FP_DECL_D(B);
FP_DECL_D(R);
+ FP_DECL_EX;
int ret = 0;
#ifdef DEBUG
printk("%s: %p %p %p\n", __func__, frD, frA, frB);
#endif
- __FP_UNPACK_D(A, frA);
- __FP_UNPACK_D(B, frB);
+ FP_UNPACK_DP(A, frA);
+ FP_UNPACK_DP(B, frB);
#ifdef DEBUG
printk("A: %ld %lu %lu %ld (%ld) [%08lx.%08lx %lx]\n",
@@ -38,5 +40,7 @@
R_s, R_f1, R_f0, R_e, R_c, R_f1, R_f0, R_e + 1023);
#endif
- return (ret | __FP_PACK_D(frD, R));
+ __FP_PACK_D(frD, R);
+
+ return FP_CUR_EXCEPTIONS;
}
diff --git a/arch/powerpc/math-emu/fmuls.c b/arch/powerpc/math-emu/fmuls.c
index 962b588..2d3ec5f 100644
--- a/arch/powerpc/math-emu/fmuls.c
+++ b/arch/powerpc/math-emu/fmuls.c
@@ -2,9 +2,10 @@
#include <linux/errno.h>
#include <asm/uaccess.h>
-#include "soft-fp.h"
-#include "double.h"
-#include "single.h"
+#include <asm/sfp-machine.h>
+#include <math-emu/soft-fp.h>
+#include <math-emu/double.h>
+#include <math-emu/single.h>
int
fmuls(void *frD, void *frA, void *frB)
@@ -12,14 +13,15 @@
FP_DECL_D(A);
FP_DECL_D(B);
FP_DECL_D(R);
+ FP_DECL_EX;
int ret = 0;
#ifdef DEBUG
printk("%s: %p %p %p\n", __func__, frD, frA, frB);
#endif
- __FP_UNPACK_D(A, frA);
- __FP_UNPACK_D(B, frB);
+ FP_UNPACK_DP(A, frA);
+ FP_UNPACK_DP(B, frB);
#ifdef DEBUG
printk("A: %ld %lu %lu %ld (%ld) [%08lx.%08lx %lx]\n",
@@ -39,5 +41,7 @@
R_s, R_f1, R_f0, R_e, R_c, R_f1, R_f0, R_e + 1023);
#endif
- return (ret | __FP_PACK_DS(frD, R));
+ __FP_PACK_DS(frD, R);
+
+ return FP_CUR_EXCEPTIONS;
}
diff --git a/arch/powerpc/math-emu/fnmadd.c b/arch/powerpc/math-emu/fnmadd.c
index 8cf7827..2497b86 100644
--- a/arch/powerpc/math-emu/fnmadd.c
+++ b/arch/powerpc/math-emu/fnmadd.c
@@ -2,8 +2,9 @@
#include <linux/errno.h>
#include <asm/uaccess.h>
-#include "soft-fp.h"
-#include "double.h"
+#include <asm/sfp-machine.h>
+#include <math-emu/soft-fp.h>
+#include <math-emu/double.h>
int
fnmadd(void *frD, void *frA, void *frB, void *frC)
@@ -13,15 +14,16 @@
FP_DECL_D(B);
FP_DECL_D(C);
FP_DECL_D(T);
+ FP_DECL_EX;
int ret = 0;
#ifdef DEBUG
printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
#endif
- __FP_UNPACK_D(A, frA);
- __FP_UNPACK_D(B, frB);
- __FP_UNPACK_D(C, frC);
+ FP_UNPACK_DP(A, frA);
+ FP_UNPACK_DP(B, frB);
+ FP_UNPACK_DP(C, frC);
#ifdef DEBUG
printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c);
@@ -47,5 +49,7 @@
printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c);
#endif
- return (ret | __FP_PACK_D(frD, R));
+ __FP_PACK_D(frD, R);
+
+ return FP_CUR_EXCEPTIONS;
}
diff --git a/arch/powerpc/math-emu/fnmadds.c b/arch/powerpc/math-emu/fnmadds.c
index f1c4f0f..ee9d71e 100644
--- a/arch/powerpc/math-emu/fnmadds.c
+++ b/arch/powerpc/math-emu/fnmadds.c
@@ -2,9 +2,10 @@
#include <linux/errno.h>
#include <asm/uaccess.h>
-#include "soft-fp.h"
-#include "double.h"
-#include "single.h"
+#include <asm/sfp-machine.h>
+#include <math-emu/soft-fp.h>
+#include <math-emu/double.h>
+#include <math-emu/single.h>
int
fnmadds(void *frD, void *frA, void *frB, void *frC)
@@ -14,15 +15,16 @@
FP_DECL_D(B);
FP_DECL_D(C);
FP_DECL_D(T);
+ FP_DECL_EX;
int ret = 0;
#ifdef DEBUG
printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
#endif
- __FP_UNPACK_D(A, frA);
- __FP_UNPACK_D(B, frB);
- __FP_UNPACK_D(C, frC);
+ FP_UNPACK_DP(A, frA);
+ FP_UNPACK_DP(B, frB);
+ FP_UNPACK_DP(C, frC);
#ifdef DEBUG
printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c);
@@ -48,5 +50,7 @@
printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c);
#endif
- return (ret | __FP_PACK_DS(frD, R));
+ __FP_PACK_DS(frD, R);
+
+ return FP_CUR_EXCEPTIONS;
}
diff --git a/arch/powerpc/math-emu/fnmsub.c b/arch/powerpc/math-emu/fnmsub.c
index 98944e6..3885a77a 100644
--- a/arch/powerpc/math-emu/fnmsub.c
+++ b/arch/powerpc/math-emu/fnmsub.c
@@ -2,8 +2,9 @@
#include <linux/errno.h>
#include <asm/uaccess.h>
-#include "soft-fp.h"
-#include "double.h"
+#include <asm/sfp-machine.h>
+#include <math-emu/soft-fp.h>
+#include <math-emu/double.h>
int
fnmsub(void *frD, void *frA, void *frB, void *frC)
@@ -13,15 +14,16 @@
FP_DECL_D(B);
FP_DECL_D(C);
FP_DECL_D(T);
+ FP_DECL_EX;
int ret = 0;
#ifdef DEBUG
printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
#endif
- __FP_UNPACK_D(A, frA);
- __FP_UNPACK_D(B, frB);
- __FP_UNPACK_D(C, frC);
+ FP_UNPACK_DP(A, frA);
+ FP_UNPACK_DP(B, frB);
+ FP_UNPACK_DP(C, frC);
#ifdef DEBUG
printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c);
@@ -50,5 +52,7 @@
printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c);
#endif
- return (ret | __FP_PACK_D(frD, R));
+ __FP_PACK_D(frD, R);
+
+ return FP_CUR_EXCEPTIONS;
}
diff --git a/arch/powerpc/math-emu/fnmsubs.c b/arch/powerpc/math-emu/fnmsubs.c
index b20f4eb6..f835dfe 100644
--- a/arch/powerpc/math-emu/fnmsubs.c
+++ b/arch/powerpc/math-emu/fnmsubs.c
@@ -2,9 +2,10 @@
#include <linux/errno.h>
#include <asm/uaccess.h>
-#include "soft-fp.h"
-#include "double.h"
-#include "single.h"
+#include <asm/sfp-machine.h>
+#include <math-emu/soft-fp.h>
+#include <math-emu/double.h>
+#include <math-emu/single.h>
int
fnmsubs(void *frD, void *frA, void *frB, void *frC)
@@ -14,15 +15,16 @@
FP_DECL_D(B);
FP_DECL_D(C);
FP_DECL_D(T);
+ FP_DECL_EX;
int ret = 0;
#ifdef DEBUG
printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
#endif
- __FP_UNPACK_D(A, frA);
- __FP_UNPACK_D(B, frB);
- __FP_UNPACK_D(C, frC);
+ FP_UNPACK_DP(A, frA);
+ FP_UNPACK_DP(B, frB);
+ FP_UNPACK_DP(C, frC);
#ifdef DEBUG
printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c);
@@ -51,5 +53,7 @@
printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c);
#endif
- return (ret | __FP_PACK_DS(frD, R));
+ __FP_PACK_DS(frD, R);
+
+ return FP_CUR_EXCEPTIONS;
}
diff --git a/arch/powerpc/math-emu/frsp.c b/arch/powerpc/math-emu/frsp.c
index 724ccbc..ddcc146 100644
--- a/arch/powerpc/math-emu/frsp.c
+++ b/arch/powerpc/math-emu/frsp.c
@@ -2,24 +2,28 @@
#include <linux/errno.h>
#include <asm/uaccess.h>
-#include "soft-fp.h"
-#include "double.h"
-#include "single.h"
+#include <asm/sfp-machine.h>
+#include <math-emu/soft-fp.h>
+#include <math-emu/double.h>
+#include <math-emu/single.h>
int
frsp(void *frD, void *frB)
{
FP_DECL_D(B);
+ FP_DECL_EX;
#ifdef DEBUG
printk("%s: D %p, B %p\n", __func__, frD, frB);
#endif
- __FP_UNPACK_D(B, frB);
+ FP_UNPACK_DP(B, frB);
#ifdef DEBUG
printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c);
#endif
- return __FP_PACK_DS(frD, B);
+ __FP_PACK_DS(frD, B);
+
+ return FP_CUR_EXCEPTIONS;
}
diff --git a/arch/powerpc/math-emu/fsel.c b/arch/powerpc/math-emu/fsel.c
index ecb5f28..1b0c144 100644
--- a/arch/powerpc/math-emu/fsel.c
+++ b/arch/powerpc/math-emu/fsel.c
@@ -2,19 +2,21 @@
#include <linux/errno.h>
#include <asm/uaccess.h>
-#include "soft-fp.h"
-#include "double.h"
+#include <asm/sfp-machine.h>
+#include <math-emu/soft-fp.h>
+#include <math-emu/double.h>
int
fsel(u32 *frD, void *frA, u32 *frB, u32 *frC)
{
FP_DECL_D(A);
+ FP_DECL_EX;
#ifdef DEBUG
printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
#endif
- __FP_UNPACK_D(A, frA);
+ FP_UNPACK_DP(A, frA);
#ifdef DEBUG
printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c);
diff --git a/arch/powerpc/math-emu/fsqrt.c b/arch/powerpc/math-emu/fsqrt.c
index 38ec2b7..3e90072 100644
--- a/arch/powerpc/math-emu/fsqrt.c
+++ b/arch/powerpc/math-emu/fsqrt.c
@@ -2,21 +2,23 @@
#include <linux/errno.h>
#include <asm/uaccess.h>
-#include "soft-fp.h"
-#include "double.h"
+#include <asm/sfp-machine.h>
+#include <math-emu/soft-fp.h>
+#include <math-emu/double.h>
int
fsqrt(void *frD, void *frB)
{
FP_DECL_D(B);
FP_DECL_D(R);
+ FP_DECL_EX;
int ret = 0;
#ifdef DEBUG
printk("%s: %p %p %p %p\n", __func__, frD, frB);
#endif
- __FP_UNPACK_D(B, frB);
+ FP_UNPACK_DP(B, frB);
#ifdef DEBUG
printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c);
@@ -33,5 +35,7 @@
printk("R: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c);
#endif
- return (ret | __FP_PACK_D(frD, R));
+ __FP_PACK_D(frD, R);
+
+ return FP_CUR_EXCEPTIONS;
}
diff --git a/arch/powerpc/math-emu/fsqrts.c b/arch/powerpc/math-emu/fsqrts.c
index 335263e..2843be9 100644
--- a/arch/powerpc/math-emu/fsqrts.c
+++ b/arch/powerpc/math-emu/fsqrts.c
@@ -2,22 +2,24 @@
#include <linux/errno.h>
#include <asm/uaccess.h>
-#include "soft-fp.h"
-#include "double.h"
-#include "single.h"
+#include <asm/sfp-machine.h>
+#include <math-emu/soft-fp.h>
+#include <math-emu/double.h>
+#include <math-emu/single.h>
int
fsqrts(void *frD, void *frB)
{
FP_DECL_D(B);
FP_DECL_D(R);
+ FP_DECL_EX;
int ret = 0;
#ifdef DEBUG
printk("%s: %p %p %p %p\n", __func__, frD, frB);
#endif
- __FP_UNPACK_D(B, frB);
+ FP_UNPACK_DP(B, frB);
#ifdef DEBUG
printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c);
@@ -34,5 +36,7 @@
printk("R: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c);
#endif
- return (ret | __FP_PACK_DS(frD, R));
+ __FP_PACK_DS(frD, R);
+
+ return FP_CUR_EXCEPTIONS;
}
diff --git a/arch/powerpc/math-emu/fsub.c b/arch/powerpc/math-emu/fsub.c
index 208d20f..78b0944 100644
--- a/arch/powerpc/math-emu/fsub.c
+++ b/arch/powerpc/math-emu/fsub.c
@@ -2,8 +2,9 @@
#include <linux/errno.h>
#include <asm/uaccess.h>
-#include "soft-fp.h"
-#include "double.h"
+#include <asm/sfp-machine.h>
+#include <math-emu/soft-fp.h>
+#include <math-emu/double.h>
int
fsub(void *frD, void *frA, void *frB)
@@ -11,14 +12,15 @@
FP_DECL_D(A);
FP_DECL_D(B);
FP_DECL_D(R);
+ FP_DECL_EX;
int ret = 0;
#ifdef DEBUG
printk("%s: %p %p %p\n", __func__, frD, frA, frB);
#endif
- __FP_UNPACK_D(A, frA);
- __FP_UNPACK_D(B, frB);
+ FP_UNPACK_DP(A, frA);
+ FP_UNPACK_DP(B, frB);
#ifdef DEBUG
printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c);
@@ -37,5 +39,7 @@
printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c);
#endif
- return (ret | __FP_PACK_D(frD, R));
+ __FP_PACK_D(frD, R);
+
+ return FP_CUR_EXCEPTIONS;
}
diff --git a/arch/powerpc/math-emu/fsubs.c b/arch/powerpc/math-emu/fsubs.c
index 0e61b80..d3bf908 100644
--- a/arch/powerpc/math-emu/fsubs.c
+++ b/arch/powerpc/math-emu/fsubs.c
@@ -2,9 +2,10 @@
#include <linux/errno.h>
#include <asm/uaccess.h>
-#include "soft-fp.h"
-#include "double.h"
-#include "single.h"
+#include <asm/sfp-machine.h>
+#include <math-emu/soft-fp.h>
+#include <math-emu/double.h>
+#include <math-emu/single.h>
int
fsubs(void *frD, void *frA, void *frB)
@@ -12,14 +13,15 @@
FP_DECL_D(A);
FP_DECL_D(B);
FP_DECL_D(R);
+ FP_DECL_EX;
int ret = 0;
#ifdef DEBUG
printk("%s: %p %p %p\n", __func__, frD, frA, frB);
#endif
- __FP_UNPACK_D(A, frA);
- __FP_UNPACK_D(B, frB);
+ FP_UNPACK_DP(A, frA);
+ FP_UNPACK_DP(B, frB);
#ifdef DEBUG
printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c);
@@ -38,5 +40,7 @@
printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c);
#endif
- return (ret | __FP_PACK_DS(frD, R));
+ __FP_PACK_DS(frD, R);
+
+ return FP_CUR_EXCEPTIONS;
}
diff --git a/arch/powerpc/math-emu/lfd.c b/arch/powerpc/math-emu/lfd.c
index 6ec90b57..79ac76d 100644
--- a/arch/powerpc/math-emu/lfd.c
+++ b/arch/powerpc/math-emu/lfd.c
@@ -2,8 +2,8 @@
#include <linux/errno.h>
#include <asm/uaccess.h>
-#include "sfp-machine.h"
-#include "double.h"
+#include <asm/sfp-machine.h>
+#include <math-emu/double.h>
int
lfd(void *frD, void *ea)
diff --git a/arch/powerpc/math-emu/lfs.c b/arch/powerpc/math-emu/lfs.c
index 6f18ebe..434ed27 100644
--- a/arch/powerpc/math-emu/lfs.c
+++ b/arch/powerpc/math-emu/lfs.c
@@ -2,15 +2,17 @@
#include <linux/errno.h>
#include <asm/uaccess.h>
-#include "soft-fp.h"
-#include "double.h"
-#include "single.h"
+#include <asm/sfp-machine.h>
+#include <math-emu/soft-fp.h>
+#include <math-emu/double.h>
+#include <math-emu/single.h>
int
lfs(void *frD, void *ea)
{
FP_DECL_D(R);
FP_DECL_S(A);
+ FP_DECL_EX;
float f;
#ifdef DEBUG
@@ -20,7 +22,7 @@
if (copy_from_user(&f, ea, sizeof(float)))
return -EFAULT;
- __FP_UNPACK_S(A, &f);
+ FP_UNPACK_S(A, f);
#ifdef DEBUG
printk("A: %ld %lu %ld (%ld) [%08lx]\n", A_s, A_f, A_e, A_c,
@@ -33,5 +35,12 @@
printk("R: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c);
#endif
- return __FP_PACK_D(frD, R);
+ if (R_c == FP_CLS_NAN) {
+ R_e = _FP_EXPMAX_D;
+ _FP_PACK_RAW_2_P(D, frD, R);
+ } else {
+ __FP_PACK_D(frD, R);
+ }
+
+ return 0;
}
diff --git a/arch/powerpc/math-emu/math.c b/arch/powerpc/math-emu/math.c
index 29e545e..164d559 100644
--- a/arch/powerpc/math-emu/math.c
+++ b/arch/powerpc/math-emu/math.c
@@ -8,8 +8,8 @@
#include <asm/uaccess.h>
#include <asm/reg.h>
-#include "sfp-machine.h"
-#include "double.h"
+#include <asm/sfp-machine.h>
+#include <math-emu/double.h>
#define FLOATFUNC(x) extern int x(void *, void *, void *, void *)
@@ -168,6 +168,8 @@
fpscr |= FPSCR_ZX;
if (eflag & EFLAG_INEXACT)
fpscr |= FPSCR_XX;
+ if (eflag & EFLAG_INVALID)
+ fpscr |= FPSCR_VX;
if (eflag & EFLAG_VXSNAN)
fpscr |= FPSCR_VXSNAN;
if (eflag & EFLAG_VXISI)
@@ -188,7 +190,7 @@
fpscr |= FPSCR_VXCVI;
}
- fpscr &= ~(FPSCR_VX);
+// fpscr &= ~(FPSCR_VX);
if (fpscr & (FPSCR_VXSNAN | FPSCR_VXISI | FPSCR_VXIDI |
FPSCR_VXZDZ | FPSCR_VXIMZ | FPSCR_VXVC |
FPSCR_VXSOFT | FPSCR_VXSQRT | FPSCR_VXCVI))
diff --git a/arch/powerpc/math-emu/mcrfs.c b/arch/powerpc/math-emu/mcrfs.c
index 41ba247..e948d57 100644
--- a/arch/powerpc/math-emu/mcrfs.c
+++ b/arch/powerpc/math-emu/mcrfs.c
@@ -2,7 +2,8 @@
#include <linux/errno.h>
#include <asm/uaccess.h>
-#include "soft-fp.h"
+#include <asm/sfp-machine.h>
+#include <math-emu/soft-fp.h>
int
mcrfs(u32 *ccr, u32 crfD, u32 crfS)
diff --git a/arch/powerpc/math-emu/mffs.c b/arch/powerpc/math-emu/mffs.c
index b0e2106..5526cf9 100644
--- a/arch/powerpc/math-emu/mffs.c
+++ b/arch/powerpc/math-emu/mffs.c
@@ -2,7 +2,8 @@
#include <linux/errno.h>
#include <asm/uaccess.h>
-#include "soft-fp.h"
+#include <asm/sfp-machine.h>
+#include <math-emu/soft-fp.h>
int
mffs(u32 *frD)
diff --git a/arch/powerpc/math-emu/mtfsb0.c b/arch/powerpc/math-emu/mtfsb0.c
index d306235..bc98558 100644
--- a/arch/powerpc/math-emu/mtfsb0.c
+++ b/arch/powerpc/math-emu/mtfsb0.c
@@ -2,7 +2,8 @@
#include <linux/errno.h>
#include <asm/uaccess.h>
-#include "soft-fp.h"
+#include <asm/sfp-machine.h>
+#include <math-emu/soft-fp.h>
int
mtfsb0(int crbD)
diff --git a/arch/powerpc/math-emu/mtfsb1.c b/arch/powerpc/math-emu/mtfsb1.c
index 2e94870..fe6ed5a 100644
--- a/arch/powerpc/math-emu/mtfsb1.c
+++ b/arch/powerpc/math-emu/mtfsb1.c
@@ -2,7 +2,8 @@
#include <linux/errno.h>
#include <asm/uaccess.h>
-#include "soft-fp.h"
+#include <asm/sfp-machine.h>
+#include <math-emu/soft-fp.h>
int
mtfsb1(int crbD)
diff --git a/arch/powerpc/math-emu/mtfsf.c b/arch/powerpc/math-emu/mtfsf.c
index 48014d8..dbce92e 100644
--- a/arch/powerpc/math-emu/mtfsf.c
+++ b/arch/powerpc/math-emu/mtfsf.c
@@ -2,12 +2,14 @@
#include <linux/errno.h>
#include <asm/uaccess.h>
-#include "soft-fp.h"
+#include <asm/sfp-machine.h>
+#include <math-emu/soft-fp.h>
int
mtfsf(unsigned int FM, u32 *frB)
{
u32 mask;
+ u32 fpscr;
if (FM == 0)
return 0;
@@ -37,6 +39,22 @@
__FPU_FPSCR &= ~(mask);
__FPU_FPSCR |= (frB[1] & mask);
+ __FPU_FPSCR &= ~(FPSCR_VX);
+ if (__FPU_FPSCR & (FPSCR_VXSNAN | FPSCR_VXISI | FPSCR_VXIDI |
+ FPSCR_VXZDZ | FPSCR_VXIMZ | FPSCR_VXVC |
+ FPSCR_VXSOFT | FPSCR_VXSQRT | FPSCR_VXCVI))
+ __FPU_FPSCR |= FPSCR_VX;
+
+ fpscr = __FPU_FPSCR;
+ fpscr &= ~(FPSCR_FEX);
+ if (((fpscr & FPSCR_VX) && (fpscr & FPSCR_VE)) ||
+ ((fpscr & FPSCR_OX) && (fpscr & FPSCR_OE)) ||
+ ((fpscr & FPSCR_UX) && (fpscr & FPSCR_UE)) ||
+ ((fpscr & FPSCR_ZX) && (fpscr & FPSCR_ZE)) ||
+ ((fpscr & FPSCR_XX) && (fpscr & FPSCR_XE)))
+ fpscr |= FPSCR_FEX;
+ __FPU_FPSCR = fpscr;
+
#ifdef DEBUG
printk("%s: %02x %p: %08lx\n", __func__, FM, frB, __FPU_FPSCR);
#endif
diff --git a/arch/powerpc/math-emu/mtfsfi.c b/arch/powerpc/math-emu/mtfsfi.c
index 031e200..fd2acc2 100644
--- a/arch/powerpc/math-emu/mtfsfi.c
+++ b/arch/powerpc/math-emu/mtfsfi.c
@@ -2,7 +2,8 @@
#include <linux/errno.h>
#include <asm/uaccess.h>
-#include "soft-fp.h"
+#include <asm/sfp-machine.h>
+#include <math-emu/soft-fp.h>
int
mtfsfi(unsigned int crfD, unsigned int IMM)
diff --git a/arch/powerpc/math-emu/op-1.h b/arch/powerpc/math-emu/op-1.h
deleted file mode 100644
index c92fa95..0000000
--- a/arch/powerpc/math-emu/op-1.h
+++ /dev/null
@@ -1,245 +0,0 @@
-/*
- * Basic one-word fraction declaration and manipulation.
- */
-
-#define _FP_FRAC_DECL_1(X) _FP_W_TYPE X##_f
-#define _FP_FRAC_COPY_1(D,S) (D##_f = S##_f)
-#define _FP_FRAC_SET_1(X,I) (X##_f = I)
-#define _FP_FRAC_HIGH_1(X) (X##_f)
-#define _FP_FRAC_LOW_1(X) (X##_f)
-#define _FP_FRAC_WORD_1(X,w) (X##_f)
-
-#define _FP_FRAC_ADDI_1(X,I) (X##_f += I)
-#define _FP_FRAC_SLL_1(X,N) \
- do { \
- if (__builtin_constant_p(N) && (N) == 1) \
- X##_f += X##_f; \
- else \
- X##_f <<= (N); \
- } while (0)
-#define _FP_FRAC_SRL_1(X,N) (X##_f >>= N)
-
-/* Right shift with sticky-lsb. */
-#define _FP_FRAC_SRS_1(X,N,sz) __FP_FRAC_SRS_1(X##_f, N, sz)
-
-#define __FP_FRAC_SRS_1(X,N,sz) \
- (X = (X >> (N) | (__builtin_constant_p(N) && (N) == 1 \
- ? X & 1 : (X << (_FP_W_TYPE_SIZE - (N))) != 0)))
-
-#define _FP_FRAC_ADD_1(R,X,Y) (R##_f = X##_f + Y##_f)
-#define _FP_FRAC_SUB_1(R,X,Y) (R##_f = X##_f - Y##_f)
-#define _FP_FRAC_CLZ_1(z, X) __FP_CLZ(z, X##_f)
-
-/* Predicates */
-#define _FP_FRAC_NEGP_1(X) ((_FP_WS_TYPE)X##_f < 0)
-#define _FP_FRAC_ZEROP_1(X) (X##_f == 0)
-#define _FP_FRAC_OVERP_1(fs,X) (X##_f & _FP_OVERFLOW_##fs)
-#define _FP_FRAC_EQ_1(X, Y) (X##_f == Y##_f)
-#define _FP_FRAC_GE_1(X, Y) (X##_f >= Y##_f)
-#define _FP_FRAC_GT_1(X, Y) (X##_f > Y##_f)
-
-#define _FP_ZEROFRAC_1 0
-#define _FP_MINFRAC_1 1
-
-/*
- * Unpack the raw bits of a native fp value. Do not classify or
- * normalize the data.
- */
-
-#define _FP_UNPACK_RAW_1(fs, X, val) \
- do { \
- union _FP_UNION_##fs _flo; _flo.flt = (val); \
- \
- X##_f = _flo.bits.frac; \
- X##_e = _flo.bits.exp; \
- X##_s = _flo.bits.sign; \
- } while (0)
-
-
-/*
- * Repack the raw bits of a native fp value.
- */
-
-#define _FP_PACK_RAW_1(fs, val, X) \
- do { \
- union _FP_UNION_##fs _flo; \
- \
- _flo.bits.frac = X##_f; \
- _flo.bits.exp = X##_e; \
- _flo.bits.sign = X##_s; \
- \
- (val) = _flo.flt; \
- } while (0)
-
-
-/*
- * Multiplication algorithms:
- */
-
-/* Basic. Assuming the host word size is >= 2*FRACBITS, we can do the
- multiplication immediately. */
-
-#define _FP_MUL_MEAT_1_imm(fs, R, X, Y) \
- do { \
- R##_f = X##_f * Y##_f; \
- /* Normalize since we know where the msb of the multiplicands \
- were (bit B), we know that the msb of the of the product is \
- at either 2B or 2B-1. */ \
- _FP_FRAC_SRS_1(R, _FP_WFRACBITS_##fs-1, 2*_FP_WFRACBITS_##fs); \
- } while (0)
-
-/* Given a 1W * 1W => 2W primitive, do the extended multiplication. */
-
-#define _FP_MUL_MEAT_1_wide(fs, R, X, Y, doit) \
- do { \
- _FP_W_TYPE _Z_f0, _Z_f1; \
- doit(_Z_f1, _Z_f0, X##_f, Y##_f); \
- /* Normalize since we know where the msb of the multiplicands \
- were (bit B), we know that the msb of the of the product is \
- at either 2B or 2B-1. */ \
- _FP_FRAC_SRS_2(_Z, _FP_WFRACBITS_##fs-1, 2*_FP_WFRACBITS_##fs); \
- R##_f = _Z_f0; \
- } while (0)
-
-/* Finally, a simple widening multiply algorithm. What fun! */
-
-#define _FP_MUL_MEAT_1_hard(fs, R, X, Y) \
- do { \
- _FP_W_TYPE _xh, _xl, _yh, _yl, _z_f0, _z_f1, _a_f0, _a_f1; \
- \
- /* split the words in half */ \
- _xh = X##_f >> (_FP_W_TYPE_SIZE/2); \
- _xl = X##_f & (((_FP_W_TYPE)1 << (_FP_W_TYPE_SIZE/2)) - 1); \
- _yh = Y##_f >> (_FP_W_TYPE_SIZE/2); \
- _yl = Y##_f & (((_FP_W_TYPE)1 << (_FP_W_TYPE_SIZE/2)) - 1); \
- \
- /* multiply the pieces */ \
- _z_f0 = _xl * _yl; \
- _a_f0 = _xh * _yl; \
- _a_f1 = _xl * _yh; \
- _z_f1 = _xh * _yh; \
- \
- /* reassemble into two full words */ \
- if ((_a_f0 += _a_f1) < _a_f1) \
- _z_f1 += (_FP_W_TYPE)1 << (_FP_W_TYPE_SIZE/2); \
- _a_f1 = _a_f0 >> (_FP_W_TYPE_SIZE/2); \
- _a_f0 = _a_f0 << (_FP_W_TYPE_SIZE/2); \
- _FP_FRAC_ADD_2(_z, _z, _a); \
- \
- /* normalize */ \
- _FP_FRAC_SRS_2(_z, _FP_WFRACBITS_##fs - 1, 2*_FP_WFRACBITS_##fs); \
- R##_f = _z_f0; \
- } while (0)
-
-
-/*
- * Division algorithms:
- */
-
-/* Basic. Assuming the host word size is >= 2*FRACBITS, we can do the
- division immediately. Give this macro either _FP_DIV_HELP_imm for
- C primitives or _FP_DIV_HELP_ldiv for the ISO function. Which you
- choose will depend on what the compiler does with divrem4. */
-
-#define _FP_DIV_MEAT_1_imm(fs, R, X, Y, doit) \
- do { \
- _FP_W_TYPE _q, _r; \
- X##_f <<= (X##_f < Y##_f \
- ? R##_e--, _FP_WFRACBITS_##fs \
- : _FP_WFRACBITS_##fs - 1); \
- doit(_q, _r, X##_f, Y##_f); \
- R##_f = _q | (_r != 0); \
- } while (0)
-
-/* GCC's longlong.h defines a 2W / 1W => (1W,1W) primitive udiv_qrnnd
- that may be useful in this situation. This first is for a primitive
- that requires normalization, the second for one that does not. Look
- for UDIV_NEEDS_NORMALIZATION to tell which your machine needs. */
-
-#define _FP_DIV_MEAT_1_udiv_norm(fs, R, X, Y) \
- do { \
- _FP_W_TYPE _nh, _nl, _q, _r; \
- \
- /* Normalize Y -- i.e. make the most significant bit set. */ \
- Y##_f <<= _FP_WFRACXBITS_##fs - 1; \
- \
- /* Shift X op correspondingly high, that is, up one full word. */ \
- if (X##_f <= Y##_f) \
- { \
- _nl = 0; \
- _nh = X##_f; \
- } \
- else \
- { \
- R##_e++; \
- _nl = X##_f << (_FP_W_TYPE_SIZE-1); \
- _nh = X##_f >> 1; \
- } \
- \
- udiv_qrnnd(_q, _r, _nh, _nl, Y##_f); \
- R##_f = _q | (_r != 0); \
- } while (0)
-
-#define _FP_DIV_MEAT_1_udiv(fs, R, X, Y) \
- do { \
- _FP_W_TYPE _nh, _nl, _q, _r; \
- if (X##_f < Y##_f) \
- { \
- R##_e--; \
- _nl = X##_f << _FP_WFRACBITS_##fs; \
- _nh = X##_f >> _FP_WFRACXBITS_##fs; \
- } \
- else \
- { \
- _nl = X##_f << (_FP_WFRACBITS_##fs - 1); \
- _nh = X##_f >> (_FP_WFRACXBITS_##fs + 1); \
- } \
- udiv_qrnnd(_q, _r, _nh, _nl, Y##_f); \
- R##_f = _q | (_r != 0); \
- } while (0)
-
-
-/*
- * Square root algorithms:
- * We have just one right now, maybe Newton approximation
- * should be added for those machines where division is fast.
- */
-
-#define _FP_SQRT_MEAT_1(R, S, T, X, q) \
- do { \
- while (q) \
- { \
- T##_f = S##_f + q; \
- if (T##_f <= X##_f) \
- { \
- S##_f = T##_f + q; \
- X##_f -= T##_f; \
- R##_f += q; \
- } \
- _FP_FRAC_SLL_1(X, 1); \
- q >>= 1; \
- } \
- } while (0)
-
-/*
- * Assembly/disassembly for converting to/from integral types.
- * No shifting or overflow handled here.
- */
-
-#define _FP_FRAC_ASSEMBLE_1(r, X, rsize) (r = X##_f)
-#define _FP_FRAC_DISASSEMBLE_1(X, r, rsize) (X##_f = r)
-
-
-/*
- * Convert FP values between word sizes
- */
-
-#define _FP_FRAC_CONV_1_1(dfs, sfs, D, S) \
- do { \
- D##_f = S##_f; \
- if (_FP_WFRACBITS_##sfs > _FP_WFRACBITS_##dfs) \
- _FP_FRAC_SRS_1(D, (_FP_WFRACBITS_##sfs-_FP_WFRACBITS_##dfs), \
- _FP_WFRACBITS_##sfs); \
- else \
- D##_f <<= _FP_WFRACBITS_##dfs - _FP_WFRACBITS_##sfs; \
- } while (0)
diff --git a/arch/powerpc/math-emu/op-2.h b/arch/powerpc/math-emu/op-2.h
deleted file mode 100644
index 7d6f17c..0000000
--- a/arch/powerpc/math-emu/op-2.h
+++ /dev/null
@@ -1,434 +0,0 @@
-/*
- * Basic two-word fraction declaration and manipulation.
- */
-
-#define _FP_FRAC_DECL_2(X) _FP_W_TYPE X##_f0, X##_f1
-#define _FP_FRAC_COPY_2(D,S) (D##_f0 = S##_f0, D##_f1 = S##_f1)
-#define _FP_FRAC_SET_2(X,I) __FP_FRAC_SET_2(X, I)
-#define _FP_FRAC_HIGH_2(X) (X##_f1)
-#define _FP_FRAC_LOW_2(X) (X##_f0)
-#define _FP_FRAC_WORD_2(X,w) (X##_f##w)
-
-#define _FP_FRAC_SLL_2(X,N) \
- do { \
- if ((N) < _FP_W_TYPE_SIZE) \
- { \
- if (__builtin_constant_p(N) && (N) == 1) \
- { \
- X##_f1 = X##_f1 + X##_f1 + (((_FP_WS_TYPE)(X##_f0)) < 0); \
- X##_f0 += X##_f0; \
- } \
- else \
- { \
- X##_f1 = X##_f1 << (N) | X##_f0 >> (_FP_W_TYPE_SIZE - (N)); \
- X##_f0 <<= (N); \
- } \
- } \
- else \
- { \
- X##_f1 = X##_f0 << ((N) - _FP_W_TYPE_SIZE); \
- X##_f0 = 0; \
- } \
- } while (0)
-
-#define _FP_FRAC_SRL_2(X,N) \
- do { \
- if ((N) < _FP_W_TYPE_SIZE) \
- { \
- X##_f0 = X##_f0 >> (N) | X##_f1 << (_FP_W_TYPE_SIZE - (N)); \
- X##_f1 >>= (N); \
- } \
- else \
- { \
- X##_f0 = X##_f1 >> ((N) - _FP_W_TYPE_SIZE); \
- X##_f1 = 0; \
- } \
- } while (0)
-
-/* Right shift with sticky-lsb. */
-#define _FP_FRAC_SRS_2(X,N,sz) \
- do { \
- if ((N) < _FP_W_TYPE_SIZE) \
- { \
- X##_f0 = (X##_f1 << (_FP_W_TYPE_SIZE - (N)) | X##_f0 >> (N) | \
- (__builtin_constant_p(N) && (N) == 1 \
- ? X##_f0 & 1 \
- : (X##_f0 << (_FP_W_TYPE_SIZE - (N))) != 0)); \
- X##_f1 >>= (N); \
- } \
- else \
- { \
- X##_f0 = (X##_f1 >> ((N) - _FP_W_TYPE_SIZE) | \
- (((X##_f1 << (2 * _FP_W_TYPE_SIZE - (N))) | \
- X##_f0) != 0)); \
- X##_f1 = 0; \
- } \
- } while (0)
-
-#define _FP_FRAC_ADDI_2(X,I) \
- __FP_FRAC_ADDI_2(X##_f1, X##_f0, I)
-
-#define _FP_FRAC_ADD_2(R,X,Y) \
- __FP_FRAC_ADD_2(R##_f1, R##_f0, X##_f1, X##_f0, Y##_f1, Y##_f0)
-
-#define _FP_FRAC_SUB_2(R,X,Y) \
- __FP_FRAC_SUB_2(R##_f1, R##_f0, X##_f1, X##_f0, Y##_f1, Y##_f0)
-
-#define _FP_FRAC_CLZ_2(R,X) \
- do { \
- if (X##_f1) \
- __FP_CLZ(R,X##_f1); \
- else \
- { \
- __FP_CLZ(R,X##_f0); \
- R += _FP_W_TYPE_SIZE; \
- } \
- } while(0)
-
-/* Predicates */
-#define _FP_FRAC_NEGP_2(X) ((_FP_WS_TYPE)X##_f1 < 0)
-#define _FP_FRAC_ZEROP_2(X) ((X##_f1 | X##_f0) == 0)
-#define _FP_FRAC_OVERP_2(fs,X) (X##_f1 & _FP_OVERFLOW_##fs)
-#define _FP_FRAC_EQ_2(X, Y) (X##_f1 == Y##_f1 && X##_f0 == Y##_f0)
-#define _FP_FRAC_GT_2(X, Y) \
- ((X##_f1 > Y##_f1) || (X##_f1 == Y##_f1 && X##_f0 > Y##_f0))
-#define _FP_FRAC_GE_2(X, Y) \
- ((X##_f1 > Y##_f1) || (X##_f1 == Y##_f1 && X##_f0 >= Y##_f0))
-
-#define _FP_ZEROFRAC_2 0, 0
-#define _FP_MINFRAC_2 0, 1
-
-/*
- * Internals
- */
-
-#define __FP_FRAC_SET_2(X,I1,I0) (X##_f0 = I0, X##_f1 = I1)
-
-#define __FP_CLZ_2(R, xh, xl) \
- do { \
- if (xh) \
- __FP_CLZ(R,xl); \
- else \
- { \
- __FP_CLZ(R,xl); \
- R += _FP_W_TYPE_SIZE; \
- } \
- } while(0)
-
-#if 0
-
-#ifndef __FP_FRAC_ADDI_2
-#define __FP_FRAC_ADDI_2(xh, xl, i) \
- (xh += ((xl += i) < i))
-#endif
-#ifndef __FP_FRAC_ADD_2
-#define __FP_FRAC_ADD_2(rh, rl, xh, xl, yh, yl) \
- (rh = xh + yh + ((rl = xl + yl) < xl))
-#endif
-#ifndef __FP_FRAC_SUB_2
-#define __FP_FRAC_SUB_2(rh, rl, xh, xl, yh, yl) \
- (rh = xh - yh - ((rl = xl - yl) > xl))
-#endif
-
-#else
-
-#undef __FP_FRAC_ADDI_2
-#define __FP_FRAC_ADDI_2(xh, xl, i) add_ssaaaa(xh, xl, xh, xl, 0, i)
-#undef __FP_FRAC_ADD_2
-#define __FP_FRAC_ADD_2 add_ssaaaa
-#undef __FP_FRAC_SUB_2
-#define __FP_FRAC_SUB_2 sub_ddmmss
-
-#endif
-
-/*
- * Unpack the raw bits of a native fp value. Do not classify or
- * normalize the data.
- */
-
-#define _FP_UNPACK_RAW_2(fs, X, val) \
- do { \
- union _FP_UNION_##fs _flo; _flo.flt = (val); \
- \
- X##_f0 = _flo.bits.frac0; \
- X##_f1 = _flo.bits.frac1; \
- X##_e = _flo.bits.exp; \
- X##_s = _flo.bits.sign; \
- } while (0)
-
-
-/*
- * Repack the raw bits of a native fp value.
- */
-
-#define _FP_PACK_RAW_2(fs, val, X) \
- do { \
- union _FP_UNION_##fs _flo; \
- \
- _flo.bits.frac0 = X##_f0; \
- _flo.bits.frac1 = X##_f1; \
- _flo.bits.exp = X##_e; \
- _flo.bits.sign = X##_s; \
- \
- (val) = _flo.flt; \
- } while (0)
-
-
-/*
- * Multiplication algorithms:
- */
-
-/* Given a 1W * 1W => 2W primitive, do the extended multiplication. */
-
-#define _FP_MUL_MEAT_2_wide(fs, R, X, Y, doit) \
- do { \
- _FP_FRAC_DECL_4(_z); _FP_FRAC_DECL_2(_b); _FP_FRAC_DECL_2(_c); \
- \
- doit(_FP_FRAC_WORD_4(_z,1), _FP_FRAC_WORD_4(_z,0), X##_f0, Y##_f0); \
- doit(_b_f1, _b_f0, X##_f0, Y##_f1); \
- doit(_c_f1, _c_f0, X##_f1, Y##_f0); \
- doit(_FP_FRAC_WORD_4(_z,3), _FP_FRAC_WORD_4(_z,2), X##_f1, Y##_f1); \
- \
- __FP_FRAC_ADD_4(_FP_FRAC_WORD_4(_z,3),_FP_FRAC_WORD_4(_z,2), \
- _FP_FRAC_WORD_4(_z,1),_FP_FRAC_WORD_4(_z,0), \
- 0, _b_f1, _b_f0, 0, \
- _FP_FRAC_WORD_4(_z,3),_FP_FRAC_WORD_4(_z,2), \
- _FP_FRAC_WORD_4(_z,1),_FP_FRAC_WORD_4(_z,0)); \
- __FP_FRAC_ADD_4(_FP_FRAC_WORD_4(_z,3),_FP_FRAC_WORD_4(_z,2), \
- _FP_FRAC_WORD_4(_z,1),_FP_FRAC_WORD_4(_z,0), \
- 0, _c_f1, _c_f0, 0, \
- _FP_FRAC_WORD_4(_z,3),_FP_FRAC_WORD_4(_z,2), \
- _FP_FRAC_WORD_4(_z,1),_FP_FRAC_WORD_4(_z,0)); \
- \
- /* Normalize since we know where the msb of the multiplicands \
- were (bit B), we know that the msb of the of the product is \
- at either 2B or 2B-1. */ \
- _FP_FRAC_SRS_4(_z, _FP_WFRACBITS_##fs-1, 2*_FP_WFRACBITS_##fs); \
- R##_f0 = _FP_FRAC_WORD_4(_z,0); \
- R##_f1 = _FP_FRAC_WORD_4(_z,1); \
- } while (0)
-
-/* This next macro appears to be totally broken. Fortunately nowhere
- * seems to use it :-> The problem is that we define _z[4] but
- * then use it in _FP_FRAC_SRS_4, which will attempt to access
- * _z_f[n] which will cause an error. The fix probably involves
- * declaring it with _FP_FRAC_DECL_4, see previous macro. -- PMM 02/1998
- */
-#define _FP_MUL_MEAT_2_gmp(fs, R, X, Y) \
- do { \
- _FP_W_TYPE _x[2], _y[2], _z[4]; \
- _x[0] = X##_f0; _x[1] = X##_f1; \
- _y[0] = Y##_f0; _y[1] = Y##_f1; \
- \
- mpn_mul_n(_z, _x, _y, 2); \
- \
- /* Normalize since we know where the msb of the multiplicands \
- were (bit B), we know that the msb of the of the product is \
- at either 2B or 2B-1. */ \
- _FP_FRAC_SRS_4(_z, _FP_WFRACBITS##_fs-1, 2*_FP_WFRACBITS_##fs); \
- R##_f0 = _z[0]; \
- R##_f1 = _z[1]; \
- } while (0)
-
-
-/*
- * Division algorithms:
- * This seems to be giving me difficulties -- PMM
- * Look, NetBSD seems to be able to comment algorithms. Can't you?
- * I've thrown printks at the problem.
- * This now appears to work, but I still don't really know why.
- * Also, I don't think the result is properly normalised...
- */
-
-#define _FP_DIV_MEAT_2_udiv_64(fs, R, X, Y) \
- do { \
- extern void _fp_udivmodti4(_FP_W_TYPE q[2], _FP_W_TYPE r[2], \
- _FP_W_TYPE n1, _FP_W_TYPE n0, \
- _FP_W_TYPE d1, _FP_W_TYPE d0); \
- _FP_W_TYPE _n_f3, _n_f2, _n_f1, _n_f0, _r_f1, _r_f0; \
- _FP_W_TYPE _q_f1, _q_f0, _m_f1, _m_f0; \
- _FP_W_TYPE _rmem[2], _qmem[2]; \
- /* I think this check is to ensure that the result is normalised. \
- * Assuming X,Y normalised (ie in [1.0,2.0)) X/Y will be in \
- * [0.5,2.0). Furthermore, it will be less than 1.0 iff X < Y. \
- * In this case we tweak things. (this is based on comments in \
- * the NetBSD FPU emulation code. ) \
- * We know X,Y are normalised because we ensure this as part of \
- * the unpacking process. -- PMM \
- */ \
- if (_FP_FRAC_GT_2(X, Y)) \
- { \
-/* R##_e++; */ \
- _n_f3 = X##_f1 >> 1; \
- _n_f2 = X##_f1 << (_FP_W_TYPE_SIZE - 1) | X##_f0 >> 1; \
- _n_f1 = X##_f0 << (_FP_W_TYPE_SIZE - 1); \
- _n_f0 = 0; \
- } \
- else \
- { \
- R##_e--; \
- _n_f3 = X##_f1; \
- _n_f2 = X##_f0; \
- _n_f1 = _n_f0 = 0; \
- } \
- \
- /* Normalize, i.e. make the most significant bit of the \
- denominator set. CHANGED: - 1 to nothing -- PMM */ \
- _FP_FRAC_SLL_2(Y, _FP_WFRACXBITS_##fs /* -1 */); \
- \
- /* Do the 256/128 bit division given the 128-bit _fp_udivmodtf4 \
- primitive snagged from libgcc2.c. */ \
- \
- _fp_udivmodti4(_qmem, _rmem, _n_f3, _n_f2, 0, Y##_f1); \
- _q_f1 = _qmem[0]; \
- umul_ppmm(_m_f1, _m_f0, _q_f1, Y##_f0); \
- _r_f1 = _rmem[0]; \
- _r_f0 = _n_f1; \
- if (_FP_FRAC_GT_2(_m, _r)) \
- { \
- _q_f1--; \
- _FP_FRAC_ADD_2(_r, _r, Y); \
- if (_FP_FRAC_GE_2(_r, Y) && _FP_FRAC_GT_2(_m, _r)) \
- { \
- _q_f1--; \
- _FP_FRAC_ADD_2(_r, _r, Y); \
- } \
- } \
- _FP_FRAC_SUB_2(_r, _r, _m); \
- \
- _fp_udivmodti4(_qmem, _rmem, _r_f1, _r_f0, 0, Y##_f1); \
- _q_f0 = _qmem[0]; \
- umul_ppmm(_m_f1, _m_f0, _q_f0, Y##_f0); \
- _r_f1 = _rmem[0]; \
- _r_f0 = _n_f0; \
- if (_FP_FRAC_GT_2(_m, _r)) \
- { \
- _q_f0--; \
- _FP_FRAC_ADD_2(_r, _r, Y); \
- if (_FP_FRAC_GE_2(_r, Y) && _FP_FRAC_GT_2(_m, _r)) \
- { \
- _q_f0--; \
- _FP_FRAC_ADD_2(_r, _r, Y); \
- } \
- } \
- _FP_FRAC_SUB_2(_r, _r, _m); \
- \
- R##_f1 = _q_f1; \
- R##_f0 = _q_f0 | ((_r_f1 | _r_f0) != 0); \
- /* adjust so answer is normalized again. I'm not sure what the \
- * final sz param should be. In practice it's never used since \
- * N is 1 which is always going to be < _FP_W_TYPE_SIZE... \
- */ \
- /* _FP_FRAC_SRS_2(R,1,_FP_WFRACBITS_##fs); */ \
- } while (0)
-
-
-#define _FP_DIV_MEAT_2_gmp(fs, R, X, Y) \
- do { \
- _FP_W_TYPE _x[4], _y[2], _z[4]; \
- _y[0] = Y##_f0; _y[1] = Y##_f1; \
- _x[0] = _x[3] = 0; \
- if (_FP_FRAC_GT_2(X, Y)) \
- { \
- R##_e++; \
- _x[1] = (X##_f0 << (_FP_WFRACBITS-1 - _FP_W_TYPE_SIZE) | \
- X##_f1 >> (_FP_W_TYPE_SIZE - \
- (_FP_WFRACBITS-1 - _FP_W_TYPE_SIZE))); \
- _x[2] = X##_f1 << (_FP_WFRACBITS-1 - _FP_W_TYPE_SIZE); \
- } \
- else \
- { \
- _x[1] = (X##_f0 << (_FP_WFRACBITS - _FP_W_TYPE_SIZE) | \
- X##_f1 >> (_FP_W_TYPE_SIZE - \
- (_FP_WFRACBITS - _FP_W_TYPE_SIZE))); \
- _x[2] = X##_f1 << (_FP_WFRACBITS - _FP_W_TYPE_SIZE); \
- } \
- \
- (void) mpn_divrem (_z, 0, _x, 4, _y, 2); \
- R##_f1 = _z[1]; \
- R##_f0 = _z[0] | ((_x[0] | _x[1]) != 0); \
- } while (0)
-
-
-/*
- * Square root algorithms:
- * We have just one right now, maybe Newton approximation
- * should be added for those machines where division is fast.
- */
-
-#define _FP_SQRT_MEAT_2(R, S, T, X, q) \
- do { \
- while (q) \
- { \
- T##_f1 = S##_f1 + q; \
- if (T##_f1 <= X##_f1) \
- { \
- S##_f1 = T##_f1 + q; \
- X##_f1 -= T##_f1; \
- R##_f1 += q; \
- } \
- _FP_FRAC_SLL_2(X, 1); \
- q >>= 1; \
- } \
- q = (_FP_W_TYPE)1 << (_FP_W_TYPE_SIZE - 1); \
- while (q) \
- { \
- T##_f0 = S##_f0 + q; \
- T##_f1 = S##_f1; \
- if (T##_f1 < X##_f1 || \
- (T##_f1 == X##_f1 && T##_f0 < X##_f0)) \
- { \
- S##_f0 = T##_f0 + q; \
- if (((_FP_WS_TYPE)T##_f0) < 0 && \
- ((_FP_WS_TYPE)S##_f0) >= 0) \
- S##_f1++; \
- _FP_FRAC_SUB_2(X, X, T); \
- R##_f0 += q; \
- } \
- _FP_FRAC_SLL_2(X, 1); \
- q >>= 1; \
- } \
- } while (0)
-
-
-/*
- * Assembly/disassembly for converting to/from integral types.
- * No shifting or overflow handled here.
- */
-
-#define _FP_FRAC_ASSEMBLE_2(r, X, rsize) \
- do { \
- if (rsize <= _FP_W_TYPE_SIZE) \
- r = X##_f0; \
- else \
- { \
- r = X##_f1; \
- r <<= _FP_W_TYPE_SIZE; \
- r += X##_f0; \
- } \
- } while (0)
-
-#define _FP_FRAC_DISASSEMBLE_2(X, r, rsize) \
- do { \
- X##_f0 = r; \
- X##_f1 = (rsize <= _FP_W_TYPE_SIZE ? 0 : r >> _FP_W_TYPE_SIZE); \
- } while (0)
-
-/*
- * Convert FP values between word sizes
- */
-
-#define _FP_FRAC_CONV_1_2(dfs, sfs, D, S) \
- do { \
- _FP_FRAC_SRS_2(S, (_FP_WFRACBITS_##sfs - _FP_WFRACBITS_##dfs), \
- _FP_WFRACBITS_##sfs); \
- D##_f = S##_f0; \
- } while (0)
-
-#define _FP_FRAC_CONV_2_1(dfs, sfs, D, S) \
- do { \
- D##_f0 = S##_f; \
- D##_f1 = 0; \
- _FP_FRAC_SLL_2(D, (_FP_WFRACBITS_##dfs - _FP_WFRACBITS_##sfs)); \
- } while (0)
-
diff --git a/arch/powerpc/math-emu/op-4.h b/arch/powerpc/math-emu/op-4.h
deleted file mode 100644
index c9ae626..0000000
--- a/arch/powerpc/math-emu/op-4.h
+++ /dev/null
@@ -1,317 +0,0 @@
-/*
- * Basic four-word fraction declaration and manipulation.
- *
- * When adding quadword support for 32 bit machines, we need
- * to be a little careful as double multiply uses some of these
- * macros: (in op-2.h)
- * _FP_MUL_MEAT_2_wide() uses _FP_FRAC_DECL_4, _FP_FRAC_WORD_4,
- * _FP_FRAC_ADD_4, _FP_FRAC_SRS_4
- * _FP_MUL_MEAT_2_gmp() uses _FP_FRAC_SRS_4 (and should use
- * _FP_FRAC_DECL_4: it appears to be broken and is not used
- * anywhere anyway. )
- *
- * I've now fixed all the macros that were here from the sparc64 code.
- * [*none* of the shift macros were correct!] -- PMM 02/1998
- *
- * The only quadword stuff that remains to be coded is:
- * 1) the conversion to/from ints, which requires
- * that we check (in op-common.h) that the following do the right thing
- * for quadwords: _FP_TO_INT(Q,4,r,X,rsz,rsg), _FP_FROM_INT(Q,4,X,r,rs,rt)
- * 2) multiply, divide and sqrt, which require:
- * _FP_MUL_MEAT_4_*(R,X,Y), _FP_DIV_MEAT_4_*(R,X,Y), _FP_SQRT_MEAT_4(R,S,T,X,q),
- * This also needs _FP_MUL_MEAT_Q and _FP_DIV_MEAT_Q to be defined to
- * some suitable _FP_MUL_MEAT_4_* macros in sfp-machine.h.
- * [we're free to choose whatever FP_MUL_MEAT_4_* macros we need for
- * these; they are used nowhere else. ]
- */
-
-#define _FP_FRAC_DECL_4(X) _FP_W_TYPE X##_f[4]
-#define _FP_FRAC_COPY_4(D,S) \
- (D##_f[0] = S##_f[0], D##_f[1] = S##_f[1], \
- D##_f[2] = S##_f[2], D##_f[3] = S##_f[3])
-/* The _FP_FRAC_SET_n(X,I) macro is intended for use with another
- * macro such as _FP_ZEROFRAC_n which returns n comma separated values.
- * The result is that we get an expansion of __FP_FRAC_SET_n(X,I0,I1,I2,I3)
- * which just assigns the In values to the array X##_f[].
- * This is why the number of parameters doesn't appear to match
- * at first glance... -- PMM
- */
-#define _FP_FRAC_SET_4(X,I) __FP_FRAC_SET_4(X, I)
-#define _FP_FRAC_HIGH_4(X) (X##_f[3])
-#define _FP_FRAC_LOW_4(X) (X##_f[0])
-#define _FP_FRAC_WORD_4(X,w) (X##_f[w])
-
-#define _FP_FRAC_SLL_4(X,N) \
- do { \
- _FP_I_TYPE _up, _down, _skip, _i; \
- _skip = (N) / _FP_W_TYPE_SIZE; \
- _up = (N) % _FP_W_TYPE_SIZE; \
- _down = _FP_W_TYPE_SIZE - _up; \
- for (_i = 3; _i > _skip; --_i) \
- X##_f[_i] = X##_f[_i-_skip] << _up | X##_f[_i-_skip-1] >> _down; \
-/* bugfixed: was X##_f[_i] <<= _up; -- PMM 02/1998 */ \
- X##_f[_i] = X##_f[0] << _up; \
- for (--_i; _i >= 0; --_i) \
- X##_f[_i] = 0; \
- } while (0)
-
-/* This one was broken too */
-#define _FP_FRAC_SRL_4(X,N) \
- do { \
- _FP_I_TYPE _up, _down, _skip, _i; \
- _skip = (N) / _FP_W_TYPE_SIZE; \
- _down = (N) % _FP_W_TYPE_SIZE; \
- _up = _FP_W_TYPE_SIZE - _down; \
- for (_i = 0; _i < 3-_skip; ++_i) \
- X##_f[_i] = X##_f[_i+_skip] >> _down | X##_f[_i+_skip+1] << _up; \
- X##_f[_i] = X##_f[3] >> _down; \
- for (++_i; _i < 4; ++_i) \
- X##_f[_i] = 0; \
- } while (0)
-
-
-/* Right shift with sticky-lsb.
- * What this actually means is that we do a standard right-shift,
- * but that if any of the bits that fall off the right hand side
- * were one then we always set the LSbit.
- */
-#define _FP_FRAC_SRS_4(X,N,size) \
- do { \
- _FP_I_TYPE _up, _down, _skip, _i; \
- _FP_W_TYPE _s; \
- _skip = (N) / _FP_W_TYPE_SIZE; \
- _down = (N) % _FP_W_TYPE_SIZE; \
- _up = _FP_W_TYPE_SIZE - _down; \
- for (_s = _i = 0; _i < _skip; ++_i) \
- _s |= X##_f[_i]; \
- _s |= X##_f[_i] << _up; \
-/* s is now != 0 if we want to set the LSbit */ \
- for (_i = 0; _i < 3-_skip; ++_i) \
- X##_f[_i] = X##_f[_i+_skip] >> _down | X##_f[_i+_skip+1] << _up; \
- X##_f[_i] = X##_f[3] >> _down; \
- for (++_i; _i < 4; ++_i) \
- X##_f[_i] = 0; \
- /* don't fix the LSB until the very end when we're sure f[0] is stable */ \
- X##_f[0] |= (_s != 0); \
- } while (0)
-
-#define _FP_FRAC_ADD_4(R,X,Y) \
- __FP_FRAC_ADD_4(R##_f[3], R##_f[2], R##_f[1], R##_f[0], \
- X##_f[3], X##_f[2], X##_f[1], X##_f[0], \
- Y##_f[3], Y##_f[2], Y##_f[1], Y##_f[0])
-
-#define _FP_FRAC_SUB_4(R,X,Y) \
- __FP_FRAC_SUB_4(R##_f[3], R##_f[2], R##_f[1], R##_f[0], \
- X##_f[3], X##_f[2], X##_f[1], X##_f[0], \
- Y##_f[3], Y##_f[2], Y##_f[1], Y##_f[0])
-
-#define _FP_FRAC_ADDI_4(X,I) \
- __FP_FRAC_ADDI_4(X##_f[3], X##_f[2], X##_f[1], X##_f[0], I)
-
-#define _FP_ZEROFRAC_4 0,0,0,0
-#define _FP_MINFRAC_4 0,0,0,1
-
-#define _FP_FRAC_ZEROP_4(X) ((X##_f[0] | X##_f[1] | X##_f[2] | X##_f[3]) == 0)
-#define _FP_FRAC_NEGP_4(X) ((_FP_WS_TYPE)X##_f[3] < 0)
-#define _FP_FRAC_OVERP_4(fs,X) (X##_f[0] & _FP_OVERFLOW_##fs)
-
-#define _FP_FRAC_EQ_4(X,Y) \
- (X##_f[0] == Y##_f[0] && X##_f[1] == Y##_f[1] \
- && X##_f[2] == Y##_f[2] && X##_f[3] == Y##_f[3])
-
-#define _FP_FRAC_GT_4(X,Y) \
- (X##_f[3] > Y##_f[3] || \
- (X##_f[3] == Y##_f[3] && (X##_f[2] > Y##_f[2] || \
- (X##_f[2] == Y##_f[2] && (X##_f[1] > Y##_f[1] || \
- (X##_f[1] == Y##_f[1] && X##_f[0] > Y##_f[0]) \
- )) \
- )) \
- )
-
-#define _FP_FRAC_GE_4(X,Y) \
- (X##_f[3] > Y##_f[3] || \
- (X##_f[3] == Y##_f[3] && (X##_f[2] > Y##_f[2] || \
- (X##_f[2] == Y##_f[2] && (X##_f[1] > Y##_f[1] || \
- (X##_f[1] == Y##_f[1] && X##_f[0] >= Y##_f[0]) \
- )) \
- )) \
- )
-
-
-#define _FP_FRAC_CLZ_4(R,X) \
- do { \
- if (X##_f[3]) \
- { \
- __FP_CLZ(R,X##_f[3]); \
- } \
- else if (X##_f[2]) \
- { \
- __FP_CLZ(R,X##_f[2]); \
- R += _FP_W_TYPE_SIZE; \
- } \
- else if (X##_f[1]) \
- { \
- __FP_CLZ(R,X##_f[2]); \
- R += _FP_W_TYPE_SIZE*2; \
- } \
- else \
- { \
- __FP_CLZ(R,X##_f[0]); \
- R += _FP_W_TYPE_SIZE*3; \
- } \
- } while(0)
-
-
-#define _FP_UNPACK_RAW_4(fs, X, val) \
- do { \
- union _FP_UNION_##fs _flo; _flo.flt = (val); \
- X##_f[0] = _flo.bits.frac0; \
- X##_f[1] = _flo.bits.frac1; \
- X##_f[2] = _flo.bits.frac2; \
- X##_f[3] = _flo.bits.frac3; \
- X##_e = _flo.bits.exp; \
- X##_s = _flo.bits.sign; \
- } while (0)
-
-#define _FP_PACK_RAW_4(fs, val, X) \
- do { \
- union _FP_UNION_##fs _flo; \
- _flo.bits.frac0 = X##_f[0]; \
- _flo.bits.frac1 = X##_f[1]; \
- _flo.bits.frac2 = X##_f[2]; \
- _flo.bits.frac3 = X##_f[3]; \
- _flo.bits.exp = X##_e; \
- _flo.bits.sign = X##_s; \
- (val) = _flo.flt; \
- } while (0)
-
-
-/*
- * Internals
- */
-
-#define __FP_FRAC_SET_4(X,I3,I2,I1,I0) \
- (X##_f[3] = I3, X##_f[2] = I2, X##_f[1] = I1, X##_f[0] = I0)
-
-#ifndef __FP_FRAC_ADD_4
-#define __FP_FRAC_ADD_4(r3,r2,r1,r0,x3,x2,x1,x0,y3,y2,y1,y0) \
- do { \
- int _c1, _c2, _c3; \
- r0 = x0 + y0; \
- _c1 = r0 < x0; \
- r1 = x1 + y1; \
- _c2 = r1 < x1; \
- r1 += _c1; \
- _c2 |= r1 < _c1; \
- r2 = x2 + y2; \
- _c3 = r2 < x2; \
- r2 += _c2; \
- _c3 |= r2 < _c2; \
- r3 = x3 + y3 + _c3; \
- } while (0)
-#endif
-
-#ifndef __FP_FRAC_SUB_4
-#define __FP_FRAC_SUB_4(r3,r2,r1,r0,x3,x2,x1,x0,y3,y2,y1,y0) \
- do { \
- int _c1, _c2, _c3; \
- r0 = x0 - y0; \
- _c1 = r0 > x0; \
- r1 = x1 - y1; \
- _c2 = r1 > x1; \
- r1 -= _c1; \
- _c2 |= r1 > _c1; \
- r2 = x2 - y2; \
- _c3 = r2 > x2; \
- r2 -= _c2; \
- _c3 |= r2 > _c2; \
- r3 = x3 - y3 - _c3; \
- } while (0)
-#endif
-
-#ifndef __FP_FRAC_ADDI_4
-/* I always wanted to be a lisp programmer :-> */
-#define __FP_FRAC_ADDI_4(x3,x2,x1,x0,i) \
- (x3 += ((x2 += ((x1 += ((x0 += i) < x0)) < x1) < x2)))
-#endif
-
-/* Convert FP values between word sizes. This appears to be more
- * complicated than I'd have expected it to be, so these might be
- * wrong... These macros are in any case somewhat bogus because they
- * use information about what various FRAC_n variables look like
- * internally [eg, that 2 word vars are X_f0 and x_f1]. But so do
- * the ones in op-2.h and op-1.h.
- */
-#define _FP_FRAC_CONV_1_4(dfs, sfs, D, S) \
- do { \
- _FP_FRAC_SRS_4(S, (_FP_WFRACBITS_##sfs - _FP_WFRACBITS_##dfs), \
- _FP_WFRACBITS_##sfs); \
- D##_f = S##_f[0]; \
- } while (0)
-
-#define _FP_FRAC_CONV_2_4(dfs, sfs, D, S) \
- do { \
- _FP_FRAC_SRS_4(S, (_FP_WFRACBITS_##sfs - _FP_WFRACBITS_##dfs), \
- _FP_WFRACBITS_##sfs); \
- D##_f0 = S##_f[0]; \
- D##_f1 = S##_f[1]; \
- } while (0)
-
-/* Assembly/disassembly for converting to/from integral types.
- * No shifting or overflow handled here.
- */
-/* Put the FP value X into r, which is an integer of size rsize. */
-#define _FP_FRAC_ASSEMBLE_4(r, X, rsize) \
- do { \
- if (rsize <= _FP_W_TYPE_SIZE) \
- r = X##_f[0]; \
- else if (rsize <= 2*_FP_W_TYPE_SIZE) \
- { \
- r = X##_f[1]; \
- r <<= _FP_W_TYPE_SIZE; \
- r += X##_f[0]; \
- } \
- else \
- { \
- /* I'm feeling lazy so we deal with int == 3words (implausible)*/ \
- /* and int == 4words as a single case. */ \
- r = X##_f[3]; \
- r <<= _FP_W_TYPE_SIZE; \
- r += X##_f[2]; \
- r <<= _FP_W_TYPE_SIZE; \
- r += X##_f[1]; \
- r <<= _FP_W_TYPE_SIZE; \
- r += X##_f[0]; \
- } \
- } while (0)
-
-/* "No disassemble Number Five!" */
-/* move an integer of size rsize into X's fractional part. We rely on
- * the _f[] array consisting of words of size _FP_W_TYPE_SIZE to avoid
- * having to mask the values we store into it.
- */
-#define _FP_FRAC_DISASSEMBLE_4(X, r, rsize) \
- do { \
- X##_f[0] = r; \
- X##_f[1] = (rsize <= _FP_W_TYPE_SIZE ? 0 : r >> _FP_W_TYPE_SIZE); \
- X##_f[2] = (rsize <= 2*_FP_W_TYPE_SIZE ? 0 : r >> 2*_FP_W_TYPE_SIZE); \
- X##_f[3] = (rsize <= 3*_FP_W_TYPE_SIZE ? 0 : r >> 3*_FP_W_TYPE_SIZE); \
- } while (0)
-
-#define _FP_FRAC_CONV_4_1(dfs, sfs, D, S) \
- do { \
- D##_f[0] = S##_f; \
- D##_f[1] = D##_f[2] = D##_f[3] = 0; \
- _FP_FRAC_SLL_4(D, (_FP_WFRACBITS_##dfs - _FP_WFRACBITS_##sfs)); \
- } while (0)
-
-#define _FP_FRAC_CONV_4_2(dfs, sfs, D, S) \
- do { \
- D##_f[0] = S##_f0; \
- D##_f[1] = S##_f1; \
- D##_f[2] = D##_f[3] = 0; \
- _FP_FRAC_SLL_4(D, (_FP_WFRACBITS_##dfs - _FP_WFRACBITS_##sfs)); \
- } while (0)
-
-/* FIXME! This has to be written */
-#define _FP_SQRT_MEAT_4(R, S, T, X, q)
diff --git a/arch/powerpc/math-emu/op-common.h b/arch/powerpc/math-emu/op-common.h
deleted file mode 100644
index afb82b6..0000000
--- a/arch/powerpc/math-emu/op-common.h
+++ /dev/null
@@ -1,688 +0,0 @@
-#define _FP_DECL(wc, X) \
- _FP_I_TYPE X##_c, X##_s, X##_e; \
- _FP_FRAC_DECL_##wc(X)
-
-/*
- * Finish truely unpacking a native fp value by classifying the kind
- * of fp value and normalizing both the exponent and the fraction.
- */
-
-#define _FP_UNPACK_CANONICAL(fs, wc, X) \
-do { \
- switch (X##_e) \
- { \
- default: \
- _FP_FRAC_HIGH_##wc(X) |= _FP_IMPLBIT_##fs; \
- _FP_FRAC_SLL_##wc(X, _FP_WORKBITS); \
- X##_e -= _FP_EXPBIAS_##fs; \
- X##_c = FP_CLS_NORMAL; \
- break; \
- \
- case 0: \
- if (_FP_FRAC_ZEROP_##wc(X)) \
- X##_c = FP_CLS_ZERO; \
- else \
- { \
- /* a denormalized number */ \
- _FP_I_TYPE _shift; \
- _FP_FRAC_CLZ_##wc(_shift, X); \
- _shift -= _FP_FRACXBITS_##fs; \
- _FP_FRAC_SLL_##wc(X, (_shift+_FP_WORKBITS)); \
- X##_e -= _FP_EXPBIAS_##fs - 1 + _shift; \
- X##_c = FP_CLS_NORMAL; \
- } \
- break; \
- \
- case _FP_EXPMAX_##fs: \
- if (_FP_FRAC_ZEROP_##wc(X)) \
- X##_c = FP_CLS_INF; \
- else \
- /* we don't differentiate between signaling and quiet nans */ \
- X##_c = FP_CLS_NAN; \
- break; \
- } \
-} while (0)
-
-
-/*
- * Before packing the bits back into the native fp result, take care
- * of such mundane things as rounding and overflow. Also, for some
- * kinds of fp values, the original parts may not have been fully
- * extracted -- but that is ok, we can regenerate them now.
- */
-
-#define _FP_PACK_CANONICAL(fs, wc, X) \
-({int __ret = 0; \
- switch (X##_c) \
- { \
- case FP_CLS_NORMAL: \
- X##_e += _FP_EXPBIAS_##fs; \
- if (X##_e > 0) \
- { \
- __ret |= _FP_ROUND(wc, X); \
- if (_FP_FRAC_OVERP_##wc(fs, X)) \
- { \
- _FP_FRAC_SRL_##wc(X, (_FP_WORKBITS+1)); \
- X##_e++; \
- } \
- else \
- _FP_FRAC_SRL_##wc(X, _FP_WORKBITS); \
- if (X##_e >= _FP_EXPMAX_##fs) \
- { \
- /* overflow to infinity */ \
- X##_e = _FP_EXPMAX_##fs; \
- _FP_FRAC_SET_##wc(X, _FP_ZEROFRAC_##wc); \
- __ret |= EFLAG_OVERFLOW; \
- } \
- } \
- else \
- { \
- /* we've got a denormalized number */ \
- X##_e = -X##_e + 1; \
- if (X##_e <= _FP_WFRACBITS_##fs) \
- { \
- _FP_FRAC_SRS_##wc(X, X##_e, _FP_WFRACBITS_##fs); \
- _FP_FRAC_SLL_##wc(X, 1); \
- if (_FP_FRAC_OVERP_##wc(fs, X)) \
- { \
- X##_e = 1; \
- _FP_FRAC_SET_##wc(X, _FP_ZEROFRAC_##wc); \
- } \
- else \
- { \
- X##_e = 0; \
- _FP_FRAC_SRL_##wc(X, _FP_WORKBITS+1); \
- __ret |= EFLAG_UNDERFLOW; \
- } \
- } \
- else \
- { \
- /* underflow to zero */ \
- X##_e = 0; \
- _FP_FRAC_SET_##wc(X, _FP_ZEROFRAC_##wc); \
- __ret |= EFLAG_UNDERFLOW; \
- } \
- } \
- break; \
- \
- case FP_CLS_ZERO: \
- X##_e = 0; \
- _FP_FRAC_SET_##wc(X, _FP_ZEROFRAC_##wc); \
- break; \
- \
- case FP_CLS_INF: \
- X##_e = _FP_EXPMAX_##fs; \
- _FP_FRAC_SET_##wc(X, _FP_ZEROFRAC_##wc); \
- break; \
- \
- case FP_CLS_NAN: \
- X##_e = _FP_EXPMAX_##fs; \
- if (!_FP_KEEPNANFRACP) \
- { \
- _FP_FRAC_SET_##wc(X, _FP_NANFRAC_##fs); \
- X##_s = 0; \
- } \
- else \
- _FP_FRAC_HIGH_##wc(X) |= _FP_QNANBIT_##fs; \
- break; \
- } \
- __ret; \
-})
-
-
-/*
- * Main addition routine. The input values should be cooked.
- */
-
-#define _FP_ADD(fs, wc, R, X, Y) \
-do { \
- switch (_FP_CLS_COMBINE(X##_c, Y##_c)) \
- { \
- case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_NORMAL): \
- { \
- /* shift the smaller number so that its exponent matches the larger */ \
- _FP_I_TYPE diff = X##_e - Y##_e; \
- \
- if (diff < 0) \
- { \
- diff = -diff; \
- if (diff <= _FP_WFRACBITS_##fs) \
- _FP_FRAC_SRS_##wc(X, diff, _FP_WFRACBITS_##fs); \
- else if (!_FP_FRAC_ZEROP_##wc(X)) \
- _FP_FRAC_SET_##wc(X, _FP_MINFRAC_##wc); \
- else \
- _FP_FRAC_SET_##wc(X, _FP_ZEROFRAC_##wc); \
- R##_e = Y##_e; \
- } \
- else \
- { \
- if (diff > 0) \
- { \
- if (diff <= _FP_WFRACBITS_##fs) \
- _FP_FRAC_SRS_##wc(Y, diff, _FP_WFRACBITS_##fs); \
- else if (!_FP_FRAC_ZEROP_##wc(Y)) \
- _FP_FRAC_SET_##wc(Y, _FP_MINFRAC_##wc); \
- else \
- _FP_FRAC_SET_##wc(Y, _FP_ZEROFRAC_##wc); \
- } \
- R##_e = X##_e; \
- } \
- \
- R##_c = FP_CLS_NORMAL; \
- \
- if (X##_s == Y##_s) \
- { \
- R##_s = X##_s; \
- _FP_FRAC_ADD_##wc(R, X, Y); \
- if (_FP_FRAC_OVERP_##wc(fs, R)) \
- { \
- _FP_FRAC_SRS_##wc(R, 1, _FP_WFRACBITS_##fs); \
- R##_e++; \
- } \
- } \
- else \
- { \
- R##_s = X##_s; \
- _FP_FRAC_SUB_##wc(R, X, Y); \
- if (_FP_FRAC_ZEROP_##wc(R)) \
- { \
- /* return an exact zero */ \
- if (FP_ROUNDMODE == FP_RND_MINF) \
- R##_s |= Y##_s; \
- else \
- R##_s &= Y##_s; \
- R##_c = FP_CLS_ZERO; \
- } \
- else \
- { \
- if (_FP_FRAC_NEGP_##wc(R)) \
- { \
- _FP_FRAC_SUB_##wc(R, Y, X); \
- R##_s = Y##_s; \
- } \
- \
- /* renormalize after subtraction */ \
- _FP_FRAC_CLZ_##wc(diff, R); \
- diff -= _FP_WFRACXBITS_##fs; \
- if (diff) \
- { \
- R##_e -= diff; \
- _FP_FRAC_SLL_##wc(R, diff); \
- } \
- } \
- } \
- break; \
- } \
- \
- case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_NAN): \
- _FP_CHOOSENAN(fs, wc, R, X, Y); \
- break; \
- \
- case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_ZERO): \
- R##_e = X##_e; \
- case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_NORMAL): \
- case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_INF): \
- case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_ZERO): \
- _FP_FRAC_COPY_##wc(R, X); \
- R##_s = X##_s; \
- R##_c = X##_c; \
- break; \
- \
- case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_NORMAL): \
- R##_e = Y##_e; \
- case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_NAN): \
- case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_NAN): \
- case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_NAN): \
- _FP_FRAC_COPY_##wc(R, Y); \
- R##_s = Y##_s; \
- R##_c = Y##_c; \
- break; \
- \
- case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_INF): \
- if (X##_s != Y##_s) \
- { \
- /* +INF + -INF => NAN */ \
- _FP_FRAC_SET_##wc(R, _FP_NANFRAC_##fs); \
- R##_s = X##_s ^ Y##_s; \
- R##_c = FP_CLS_NAN; \
- break; \
- } \
- /* FALLTHRU */ \
- \
- case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_NORMAL): \
- case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_ZERO): \
- R##_s = X##_s; \
- R##_c = FP_CLS_INF; \
- break; \
- \
- case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_INF): \
- case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_INF): \
- R##_s = Y##_s; \
- R##_c = FP_CLS_INF; \
- break; \
- \
- case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_ZERO): \
- /* make sure the sign is correct */ \
- if (FP_ROUNDMODE == FP_RND_MINF) \
- R##_s = X##_s | Y##_s; \
- else \
- R##_s = X##_s & Y##_s; \
- R##_c = FP_CLS_ZERO; \
- break; \
- \
- default: \
- abort(); \
- } \
-} while (0)
-
-
-/*
- * Main negation routine. FIXME -- when we care about setting exception
- * bits reliably, this will not do. We should examine all of the fp classes.
- */
-
-#define _FP_NEG(fs, wc, R, X) \
- do { \
- _FP_FRAC_COPY_##wc(R, X); \
- R##_c = X##_c; \
- R##_e = X##_e; \
- R##_s = 1 ^ X##_s; \
- } while (0)
-
-
-/*
- * Main multiplication routine. The input values should be cooked.
- */
-
-#define _FP_MUL(fs, wc, R, X, Y) \
-do { \
- R##_s = X##_s ^ Y##_s; \
- switch (_FP_CLS_COMBINE(X##_c, Y##_c)) \
- { \
- case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_NORMAL): \
- R##_c = FP_CLS_NORMAL; \
- R##_e = X##_e + Y##_e + 1; \
- \
- _FP_MUL_MEAT_##fs(R,X,Y); \
- \
- if (_FP_FRAC_OVERP_##wc(fs, R)) \
- _FP_FRAC_SRS_##wc(R, 1, _FP_WFRACBITS_##fs); \
- else \
- R##_e--; \
- break; \
- \
- case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_NAN): \
- _FP_CHOOSENAN(fs, wc, R, X, Y); \
- break; \
- \
- case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_NORMAL): \
- case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_INF): \
- case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_ZERO): \
- R##_s = X##_s; \
- \
- case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_INF): \
- case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_NORMAL): \
- case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_NORMAL): \
- case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_ZERO): \
- _FP_FRAC_COPY_##wc(R, X); \
- R##_c = X##_c; \
- break; \
- \
- case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_NAN): \
- case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_NAN): \
- case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_NAN): \
- R##_s = Y##_s; \
- \
- case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_INF): \
- case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_ZERO): \
- _FP_FRAC_COPY_##wc(R, Y); \
- R##_c = Y##_c; \
- break; \
- \
- case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_ZERO): \
- case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_INF): \
- R##_c = FP_CLS_NAN; \
- _FP_FRAC_SET_##wc(R, _FP_NANFRAC_##fs); \
- break; \
- \
- default: \
- abort(); \
- } \
-} while (0)
-
-
-/*
- * Main division routine. The input values should be cooked.
- */
-
-#define _FP_DIV(fs, wc, R, X, Y) \
-do { \
- R##_s = X##_s ^ Y##_s; \
- switch (_FP_CLS_COMBINE(X##_c, Y##_c)) \
- { \
- case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_NORMAL): \
- R##_c = FP_CLS_NORMAL; \
- R##_e = X##_e - Y##_e; \
- \
- _FP_DIV_MEAT_##fs(R,X,Y); \
- break; \
- \
- case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_NAN): \
- _FP_CHOOSENAN(fs, wc, R, X, Y); \
- break; \
- \
- case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_NORMAL): \
- case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_INF): \
- case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_ZERO): \
- R##_s = X##_s; \
- _FP_FRAC_COPY_##wc(R, X); \
- R##_c = X##_c; \
- break; \
- \
- case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_NAN): \
- case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_NAN): \
- case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_NAN): \
- R##_s = Y##_s; \
- _FP_FRAC_COPY_##wc(R, Y); \
- R##_c = Y##_c; \
- break; \
- \
- case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_INF): \
- case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_INF): \
- case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_NORMAL): \
- R##_c = FP_CLS_ZERO; \
- break; \
- \
- case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_ZERO): \
- case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_ZERO): \
- case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_NORMAL): \
- R##_c = FP_CLS_INF; \
- break; \
- \
- case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_INF): \
- case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_ZERO): \
- R##_c = FP_CLS_NAN; \
- _FP_FRAC_SET_##wc(R, _FP_NANFRAC_##fs); \
- break; \
- \
- default: \
- abort(); \
- } \
-} while (0)
-
-
-/*
- * Main differential comparison routine. The inputs should be raw not
- * cooked. The return is -1,0,1 for normal values, 2 otherwise.
- */
-
-#define _FP_CMP(fs, wc, ret, X, Y, un) \
- do { \
- /* NANs are unordered */ \
- if ((X##_e == _FP_EXPMAX_##fs && !_FP_FRAC_ZEROP_##wc(X)) \
- || (Y##_e == _FP_EXPMAX_##fs && !_FP_FRAC_ZEROP_##wc(Y))) \
- { \
- ret = un; \
- } \
- else \
- { \
- int __x_zero = (!X##_e && _FP_FRAC_ZEROP_##wc(X)) ? 1 : 0; \
- int __y_zero = (!Y##_e && _FP_FRAC_ZEROP_##wc(Y)) ? 1 : 0; \
- \
- if (__x_zero && __y_zero) \
- ret = 0; \
- else if (__x_zero) \
- ret = Y##_s ? 1 : -1; \
- else if (__y_zero) \
- ret = X##_s ? -1 : 1; \
- else if (X##_s != Y##_s) \
- ret = X##_s ? -1 : 1; \
- else if (X##_e > Y##_e) \
- ret = X##_s ? -1 : 1; \
- else if (X##_e < Y##_e) \
- ret = X##_s ? 1 : -1; \
- else if (_FP_FRAC_GT_##wc(X, Y)) \
- ret = X##_s ? -1 : 1; \
- else if (_FP_FRAC_GT_##wc(Y, X)) \
- ret = X##_s ? 1 : -1; \
- else \
- ret = 0; \
- } \
- } while (0)
-
-
-/* Simplification for strict equality. */
-
-#define _FP_CMP_EQ(fs, wc, ret, X, Y) \
- do { \
- /* NANs are unordered */ \
- if ((X##_e == _FP_EXPMAX_##fs && !_FP_FRAC_ZEROP_##wc(X)) \
- || (Y##_e == _FP_EXPMAX_##fs && !_FP_FRAC_ZEROP_##wc(Y))) \
- { \
- ret = 1; \
- } \
- else \
- { \
- ret = !(X##_e == Y##_e \
- && _FP_FRAC_EQ_##wc(X, Y) \
- && (X##_s == Y##_s || !X##_e && _FP_FRAC_ZEROP_##wc(X))); \
- } \
- } while (0)
-
-/*
- * Main square root routine. The input value should be cooked.
- */
-
-#define _FP_SQRT(fs, wc, R, X) \
-do { \
- _FP_FRAC_DECL_##wc(T); _FP_FRAC_DECL_##wc(S); \
- _FP_W_TYPE q; \
- switch (X##_c) \
- { \
- case FP_CLS_NAN: \
- R##_s = 0; \
- R##_c = FP_CLS_NAN; \
- _FP_FRAC_SET_##wc(X, _FP_ZEROFRAC_##wc); \
- break; \
- case FP_CLS_INF: \
- if (X##_s) \
- { \
- R##_s = 0; \
- R##_c = FP_CLS_NAN; /* sNAN */ \
- } \
- else \
- { \
- R##_s = 0; \
- R##_c = FP_CLS_INF; /* sqrt(+inf) = +inf */ \
- } \
- break; \
- case FP_CLS_ZERO: \
- R##_s = X##_s; \
- R##_c = FP_CLS_ZERO; /* sqrt(+-0) = +-0 */ \
- break; \
- case FP_CLS_NORMAL: \
- R##_s = 0; \
- if (X##_s) \
- { \
- R##_c = FP_CLS_NAN; /* sNAN */ \
- break; \
- } \
- R##_c = FP_CLS_NORMAL; \
- if (X##_e & 1) \
- _FP_FRAC_SLL_##wc(X, 1); \
- R##_e = X##_e >> 1; \
- _FP_FRAC_SET_##wc(S, _FP_ZEROFRAC_##wc); \
- _FP_FRAC_SET_##wc(R, _FP_ZEROFRAC_##wc); \
- q = _FP_OVERFLOW_##fs; \
- _FP_FRAC_SLL_##wc(X, 1); \
- _FP_SQRT_MEAT_##wc(R, S, T, X, q); \
- _FP_FRAC_SRL_##wc(R, 1); \
- } \
- } while (0)
-
-/*
- * Convert from FP to integer
- */
-
-/* "When a NaN, infinity, large positive argument >= 2147483648.0, or
- * large negative argument <= -2147483649.0 is converted to an integer,
- * the invalid_current bit...should be set and fp_exception_IEEE_754 should
- * be raised. If the floating point invalid trap is disabled, no trap occurs
- * and a numerical result is generated: if the sign bit of the operand
- * is 0, the result is 2147483647; if the sign bit of the operand is 1,
- * the result is -2147483648."
- * Similarly for conversion to extended ints, except that the boundaries
- * are >= 2^63, <= -(2^63 + 1), and the results are 2^63 + 1 for s=0 and
- * -2^63 for s=1.
- * -- SPARC Architecture Manual V9, Appendix B, which specifies how
- * SPARCs resolve implementation dependencies in the IEEE-754 spec.
- * I don't believe that the code below follows this. I'm not even sure
- * it's right!
- * It doesn't cope with needing to convert to an n bit integer when there
- * is no n bit integer type. Fortunately gcc provides long long so this
- * isn't a problem for sparc32.
- * I have, however, fixed its NaN handling to conform as above.
- * -- PMM 02/1998
- * NB: rsigned is not 'is r declared signed?' but 'should the value stored
- * in r be signed or unsigned?'. r is always(?) declared unsigned.
- * Comments below are mine, BTW -- PMM
- */
-#define _FP_TO_INT(fs, wc, r, X, rsize, rsigned) \
- do { \
- switch (X##_c) \
- { \
- case FP_CLS_NORMAL: \
- if (X##_e < 0) \
- { \
- /* case FP_CLS_NAN: see above! */ \
- case FP_CLS_ZERO: \
- r = 0; \
- } \
- else if (X##_e >= rsize - (rsigned != 0)) \
- { /* overflow */ \
- case FP_CLS_NAN: \
- case FP_CLS_INF: \
- if (rsigned) \
- { \
- r = 1; \
- r <<= rsize - 1; \
- r -= 1 - X##_s; \
- } \
- else \
- { \
- r = 0; \
- if (!X##_s) \
- r = ~r; \
- } \
- } \
- else \
- { \
- if (_FP_W_TYPE_SIZE*wc < rsize) \
- { \
- _FP_FRAC_ASSEMBLE_##wc(r, X, rsize); \
- r <<= X##_e - _FP_WFRACBITS_##fs; \
- } \
- else \
- { \
- if (X##_e >= _FP_WFRACBITS_##fs) \
- _FP_FRAC_SLL_##wc(X, (X##_e - _FP_WFRACBITS_##fs + 1));\
- else \
- _FP_FRAC_SRL_##wc(X, (_FP_WFRACBITS_##fs - X##_e - 1));\
- _FP_FRAC_ASSEMBLE_##wc(r, X, rsize); \
- } \
- if (rsigned && X##_s) \
- r = -r; \
- } \
- break; \
- } \
- } while (0)
-
-#define _FP_FROM_INT(fs, wc, X, r, rsize, rtype) \
- do { \
- if (r) \
- { \
- X##_c = FP_CLS_NORMAL; \
- \
- if ((X##_s = (r < 0))) \
- r = -r; \
- /* Note that `r' is now considered unsigned, so we don't have \
- to worry about the single signed overflow case. */ \
- \
- if (rsize <= _FP_W_TYPE_SIZE) \
- __FP_CLZ(X##_e, r); \
- else \
- __FP_CLZ_2(X##_e, (_FP_W_TYPE)(r >> _FP_W_TYPE_SIZE), \
- (_FP_W_TYPE)r); \
- if (rsize < _FP_W_TYPE_SIZE) \
- X##_e -= (_FP_W_TYPE_SIZE - rsize); \
- X##_e = rsize - X##_e - 1; \
- \
- if (_FP_FRACBITS_##fs < rsize && _FP_WFRACBITS_##fs < X##_e) \
- __FP_FRAC_SRS_1(r, (X##_e - _FP_WFRACBITS_##fs), rsize); \
- r &= ~((_FP_W_TYPE)1 << X##_e); \
- _FP_FRAC_DISASSEMBLE_##wc(X, ((unsigned rtype)r), rsize); \
- _FP_FRAC_SLL_##wc(X, (_FP_WFRACBITS_##fs - X##_e - 1)); \
- } \
- else \
- { \
- X##_c = FP_CLS_ZERO, X##_s = 0; \
- } \
- } while (0)
-
-
-#define FP_CONV(dfs,sfs,dwc,swc,D,S) \
- do { \
- _FP_FRAC_CONV_##dwc##_##swc(dfs, sfs, D, S); \
- D##_e = S##_e; \
- D##_c = S##_c; \
- D##_s = S##_s; \
- } while (0)
-
-/*
- * Helper primitives.
- */
-
-/* Count leading zeros in a word. */
-
-#ifndef __FP_CLZ
-#if _FP_W_TYPE_SIZE < 64
-/* this is just to shut the compiler up about shifts > word length -- PMM 02/1998 */
-#define __FP_CLZ(r, x) \
- do { \
- _FP_W_TYPE _t = (x); \
- r = _FP_W_TYPE_SIZE - 1; \
- if (_t > 0xffff) r -= 16; \
- if (_t > 0xffff) _t >>= 16; \
- if (_t > 0xff) r -= 8; \
- if (_t > 0xff) _t >>= 8; \
- if (_t & 0xf0) r -= 4; \
- if (_t & 0xf0) _t >>= 4; \
- if (_t & 0xc) r -= 2; \
- if (_t & 0xc) _t >>= 2; \
- if (_t & 0x2) r -= 1; \
- } while (0)
-#else /* not _FP_W_TYPE_SIZE < 64 */
-#define __FP_CLZ(r, x) \
- do { \
- _FP_W_TYPE _t = (x); \
- r = _FP_W_TYPE_SIZE - 1; \
- if (_t > 0xffffffff) r -= 32; \
- if (_t > 0xffffffff) _t >>= 32; \
- if (_t > 0xffff) r -= 16; \
- if (_t > 0xffff) _t >>= 16; \
- if (_t > 0xff) r -= 8; \
- if (_t > 0xff) _t >>= 8; \
- if (_t & 0xf0) r -= 4; \
- if (_t & 0xf0) _t >>= 4; \
- if (_t & 0xc) r -= 2; \
- if (_t & 0xc) _t >>= 2; \
- if (_t & 0x2) r -= 1; \
- } while (0)
-#endif /* not _FP_W_TYPE_SIZE < 64 */
-#endif /* ndef __FP_CLZ */
-
-#define _FP_DIV_HELP_imm(q, r, n, d) \
- do { \
- q = n / d, r = n % d; \
- } while (0)
-
diff --git a/arch/powerpc/math-emu/single.h b/arch/powerpc/math-emu/single.h
deleted file mode 100644
index f19d994..0000000
--- a/arch/powerpc/math-emu/single.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * Definitions for IEEE Single Precision
- */
-
-#if _FP_W_TYPE_SIZE < 32
-#error "Here's a nickel kid. Go buy yourself a real computer."
-#endif
-
-#define _FP_FRACBITS_S 24
-#define _FP_FRACXBITS_S (_FP_W_TYPE_SIZE - _FP_FRACBITS_S)
-#define _FP_WFRACBITS_S (_FP_WORKBITS + _FP_FRACBITS_S)
-#define _FP_WFRACXBITS_S (_FP_W_TYPE_SIZE - _FP_WFRACBITS_S)
-#define _FP_EXPBITS_S 8
-#define _FP_EXPBIAS_S 127
-#define _FP_EXPMAX_S 255
-#define _FP_QNANBIT_S ((_FP_W_TYPE)1 << (_FP_FRACBITS_S-2))
-#define _FP_IMPLBIT_S ((_FP_W_TYPE)1 << (_FP_FRACBITS_S-1))
-#define _FP_OVERFLOW_S ((_FP_W_TYPE)1 << (_FP_WFRACBITS_S))
-
-/* The implementation of _FP_MUL_MEAT_S and _FP_DIV_MEAT_S should be
- chosen by the target machine. */
-
-union _FP_UNION_S
-{
- float flt;
- struct {
-#if __BYTE_ORDER == __BIG_ENDIAN
- unsigned sign : 1;
- unsigned exp : _FP_EXPBITS_S;
- unsigned frac : _FP_FRACBITS_S - (_FP_IMPLBIT_S != 0);
-#else
- unsigned frac : _FP_FRACBITS_S - (_FP_IMPLBIT_S != 0);
- unsigned exp : _FP_EXPBITS_S;
- unsigned sign : 1;
-#endif
- } bits __attribute__((packed));
-};
-
-#define FP_DECL_S(X) _FP_DECL(1,X)
-#define FP_UNPACK_RAW_S(X,val) _FP_UNPACK_RAW_1(S,X,val)
-#define FP_PACK_RAW_S(val,X) _FP_PACK_RAW_1(S,val,X)
-
-#define FP_UNPACK_S(X,val) \
- do { \
- _FP_UNPACK_RAW_1(S,X,val); \
- _FP_UNPACK_CANONICAL(S,1,X); \
- } while (0)
-
-#define FP_PACK_S(val,X) \
- do { \
- _FP_PACK_CANONICAL(S,1,X); \
- _FP_PACK_RAW_1(S,val,X); \
- } while (0)
-
-#define FP_NEG_S(R,X) _FP_NEG(S,1,R,X)
-#define FP_ADD_S(R,X,Y) _FP_ADD(S,1,R,X,Y)
-#define FP_SUB_S(R,X,Y) _FP_SUB(S,1,R,X,Y)
-#define FP_MUL_S(R,X,Y) _FP_MUL(S,1,R,X,Y)
-#define FP_DIV_S(R,X,Y) _FP_DIV(S,1,R,X,Y)
-#define FP_SQRT_S(R,X) _FP_SQRT(S,1,R,X)
-
-#define FP_CMP_S(r,X,Y,un) _FP_CMP(S,1,r,X,Y,un)
-#define FP_CMP_EQ_S(r,X,Y) _FP_CMP_EQ(S,1,r,X,Y)
-
-#define FP_TO_INT_S(r,X,rsz,rsg) _FP_TO_INT(S,1,r,X,rsz,rsg)
-#define FP_FROM_INT_S(X,r,rs,rt) _FP_FROM_INT(S,1,X,r,rs,rt)
diff --git a/arch/powerpc/math-emu/soft-fp.h b/arch/powerpc/math-emu/soft-fp.h
deleted file mode 100644
index cca3959..0000000
--- a/arch/powerpc/math-emu/soft-fp.h
+++ /dev/null
@@ -1,104 +0,0 @@
-#ifndef SOFT_FP_H
-#define SOFT_FP_H
-
-#include "sfp-machine.h"
-
-#define _FP_WORKBITS 3
-#define _FP_WORK_LSB ((_FP_W_TYPE)1 << 3)
-#define _FP_WORK_ROUND ((_FP_W_TYPE)1 << 2)
-#define _FP_WORK_GUARD ((_FP_W_TYPE)1 << 1)
-#define _FP_WORK_STICKY ((_FP_W_TYPE)1 << 0)
-
-#ifndef FP_RND_NEAREST
-# define FP_RND_NEAREST 0
-# define FP_RND_ZERO 1
-# define FP_RND_PINF 2
-# define FP_RND_MINF 3
-#ifndef FP_ROUNDMODE
-# define FP_ROUNDMODE FP_RND_NEAREST
-#endif
-#endif
-
-#define _FP_ROUND_NEAREST(wc, X) \
-({ int __ret = 0; \
- int __frac = _FP_FRAC_LOW_##wc(X) & 15; \
- if (__frac & 7) { \
- __ret = EFLAG_INEXACT; \
- if ((__frac & 7) != _FP_WORK_ROUND) \
- _FP_FRAC_ADDI_##wc(X, _FP_WORK_ROUND); \
- else if (__frac & _FP_WORK_LSB) \
- _FP_FRAC_ADDI_##wc(X, _FP_WORK_ROUND); \
- } \
- __ret; \
-})
-
-#define _FP_ROUND_ZERO(wc, X) \
-({ int __ret = 0; \
- if (_FP_FRAC_LOW_##wc(X) & 7) \
- __ret = EFLAG_INEXACT; \
- __ret; \
-})
-
-#define _FP_ROUND_PINF(wc, X) \
-({ int __ret = EFLAG_INEXACT; \
- if (!X##_s && (_FP_FRAC_LOW_##wc(X) & 7)) \
- _FP_FRAC_ADDI_##wc(X, _FP_WORK_LSB); \
- else __ret = 0; \
- __ret; \
-})
-
-#define _FP_ROUND_MINF(wc, X) \
-({ int __ret = EFLAG_INEXACT; \
- if (X##_s && (_FP_FRAC_LOW_##wc(X) & 7)) \
- _FP_FRAC_ADDI_##wc(X, _FP_WORK_LSB); \
- else __ret = 0; \
- __ret; \
-})
-
-#define _FP_ROUND(wc, X) \
-({ int __ret = 0; \
- switch (FP_ROUNDMODE) \
- { \
- case FP_RND_NEAREST: \
- __ret |= _FP_ROUND_NEAREST(wc,X); \
- break; \
- case FP_RND_ZERO: \
- __ret |= _FP_ROUND_ZERO(wc,X); \
- break; \
- case FP_RND_PINF: \
- __ret |= _FP_ROUND_PINF(wc,X); \
- break; \
- case FP_RND_MINF: \
- __ret |= _FP_ROUND_MINF(wc,X); \
- break; \
- }; \
- __ret; \
-})
-
-#define FP_CLS_NORMAL 0
-#define FP_CLS_ZERO 1
-#define FP_CLS_INF 2
-#define FP_CLS_NAN 3
-
-#define _FP_CLS_COMBINE(x,y) (((x) << 2) | (y))
-
-#include "op-1.h"
-#include "op-2.h"
-#include "op-4.h"
-#include "op-common.h"
-
-/* Sigh. Silly things longlong.h needs. */
-#define UWtype _FP_W_TYPE
-#define W_TYPE_SIZE _FP_W_TYPE_SIZE
-
-typedef int SItype __attribute__((mode(SI)));
-typedef int DItype __attribute__((mode(DI)));
-typedef unsigned int USItype __attribute__((mode(SI)));
-typedef unsigned int UDItype __attribute__((mode(DI)));
-#if _FP_W_TYPE_SIZE == 32
-typedef unsigned int UHWtype __attribute__((mode(HI)));
-#elif _FP_W_TYPE_SIZE == 64
-typedef USItype UHWtype;
-#endif
-
-#endif
diff --git a/arch/powerpc/math-emu/stfs.c b/arch/powerpc/math-emu/stfs.c
index 8689aa4..6122147 100644
--- a/arch/powerpc/math-emu/stfs.c
+++ b/arch/powerpc/math-emu/stfs.c
@@ -2,23 +2,24 @@
#include <linux/errno.h>
#include <asm/uaccess.h>
-#include "soft-fp.h"
-#include "double.h"
-#include "single.h"
+#include <asm/sfp-machine.h>
+#include <math-emu/soft-fp.h>
+#include <math-emu/double.h>
+#include <math-emu/single.h>
int
stfs(void *frS, void *ea)
{
FP_DECL_D(A);
FP_DECL_S(R);
+ FP_DECL_EX;
float f;
- int err;
#ifdef DEBUG
printk("%s: S %p, ea %p\n", __func__, frS, ea);
#endif
- __FP_UNPACK_D(A, frS);
+ FP_UNPACK_DP(A, frS);
#ifdef DEBUG
printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c);
@@ -30,12 +31,12 @@
printk("R: %ld %lu %ld (%ld)\n", R_s, R_f, R_e, R_c);
#endif
- err = _FP_PACK_CANONICAL(S, 1, R);
- if (!err || !__FPU_TRAP_P(err)) {
- __FP_PACK_RAW_1(S, &f, R);
+ _FP_PACK_CANONICAL(S, 1, R);
+ if (!FP_CUR_EXCEPTIONS || !__FPU_TRAP_P(FP_CUR_EXCEPTIONS)) {
+ _FP_PACK_RAW_1_P(S, &f, R);
if (copy_to_user(ea, &f, sizeof(float)))
return -EFAULT;
}
- return err;
+ return FP_CUR_EXCEPTIONS;
}
diff --git a/arch/powerpc/math-emu/types.c b/arch/powerpc/math-emu/types.c
deleted file mode 100644
index e1ed15d..0000000
--- a/arch/powerpc/math-emu/types.c
+++ /dev/null
@@ -1,51 +0,0 @@
-#include "soft-fp.h"
-#include "double.h"
-#include "single.h"
-
-void
-fp_unpack_d(long *_s, unsigned long *_f1, unsigned long *_f0,
- long *_e, long *_c, void *val)
-{
- FP_DECL_D(X);
-
- __FP_UNPACK_RAW_2(D, X, val);
-
- _FP_UNPACK_CANONICAL(D, 2, X);
-
- *_s = X_s;
- *_f1 = X_f1;
- *_f0 = X_f0;
- *_e = X_e;
- *_c = X_c;
-}
-
-int
-fp_pack_d(void *val, long X_s, unsigned long X_f1,
- unsigned long X_f0, long X_e, long X_c)
-{
- int exc;
-
- exc = _FP_PACK_CANONICAL(D, 2, X);
- if (!exc || !__FPU_TRAP_P(exc))
- __FP_PACK_RAW_2(D, val, X);
- return exc;
-}
-
-int
-fp_pack_ds(void *val, long X_s, unsigned long X_f1,
- unsigned long X_f0, long X_e, long X_c)
-{
- FP_DECL_S(__X);
- int exc;
-
- FP_CONV(S, D, 1, 2, __X, X);
- exc = _FP_PACK_CANONICAL(S, 1, __X);
- if (!exc || !__FPU_TRAP_P(exc)) {
- _FP_UNPACK_CANONICAL(S, 1, __X);
- FP_CONV(D, S, 2, 1, X, __X);
- exc |= _FP_PACK_CANONICAL(D, 2, X);
- if (!exc || !__FPU_TRAP_P(exc))
- __FP_PACK_RAW_2(D, val, X);
- }
- return exc;
-}
diff --git a/arch/powerpc/math-emu/udivmodti4.c b/arch/powerpc/math-emu/udivmodti4.c
index 7e112dc..6172044 100644
--- a/arch/powerpc/math-emu/udivmodti4.c
+++ b/arch/powerpc/math-emu/udivmodti4.c
@@ -1,6 +1,6 @@
/* This has so very few changes over libgcc2's __udivmoddi4 it isn't funny. */
-#include "soft-fp.h"
+#include <math-emu/soft-fp.h>
#undef count_leading_zeros
#define count_leading_zeros __FP_CLZ
diff --git a/arch/powerpc/mm/fsl_booke_mmu.c b/arch/powerpc/mm/fsl_booke_mmu.c
index ce10e2b..23cee39 100644
--- a/arch/powerpc/mm/fsl_booke_mmu.c
+++ b/arch/powerpc/mm/fsl_booke_mmu.c
@@ -202,7 +202,7 @@
cam_max_size = max_lowmem_size;
/* adjust lowmem size to max_lowmem_size */
- ram = min(max_lowmem_size, (phys_addr_t)total_lowmem);
+ ram = min(max_lowmem_size, total_lowmem);
/* Calculate CAM values */
__cam0 = 1UL << 2 * (__ilog2(ram) / 2);
@@ -225,7 +225,8 @@
printk(KERN_INFO "Memory CAM mapping: CAM0=%ldMb, CAM1=%ldMb,"
" CAM2=%ldMb residual: %ldMb\n",
__cam0 >> 20, __cam1 >> 20, __cam2 >> 20,
- (total_lowmem - __cam0 - __cam1 - __cam2) >> 20);
+ (long int)((total_lowmem - __cam0 - __cam1 - __cam2)
+ >> 20));
__max_low_memory = __cam0 + __cam1 + __cam2;
__initial_memory_limit_addr = memstart_addr + __max_low_memory;
}
diff --git a/arch/powerpc/mm/gup.c b/arch/powerpc/mm/gup.c
index 9fdf4d6..28a114d 100644
--- a/arch/powerpc/mm/gup.c
+++ b/arch/powerpc/mm/gup.c
@@ -41,7 +41,7 @@
page = pte_page(pte);
if (!page_cache_get_speculative(page))
return 0;
- if (unlikely(pte != *ptep)) {
+ if (unlikely(pte_val(pte) != pte_val(*ptep))) {
put_page(page);
return 0;
}
@@ -92,7 +92,7 @@
*nr -= refs;
return 0;
}
- if (unlikely(pte != *ptep)) {
+ if (unlikely(pte_val(pte) != pte_val(*ptep))) {
/* Could be optimized better */
while (*nr) {
put_page(page);
@@ -237,7 +237,8 @@
pgd_t pgd = *pgdp;
VM_BUG_ON(shift != mmu_psize_defs[get_slice_psize(mm, addr)].shift);
- pr_debug(" %016lx: normal pgd %p\n", addr, (void *)pgd);
+ pr_debug(" %016lx: normal pgd %p\n", addr,
+ (void *)pgd_val(pgd));
next = pgd_addr_end(addr, end);
if (pgd_none(pgd))
goto slow;
diff --git a/arch/powerpc/mm/hash_low_32.S b/arch/powerpc/mm/hash_low_32.S
index b9ba7d9..7bffb70 100644
--- a/arch/powerpc/mm/hash_low_32.S
+++ b/arch/powerpc/mm/hash_low_32.S
@@ -75,7 +75,7 @@
* Returns to the caller if the access is illegal or there is no
* mapping for the address. Otherwise it places an appropriate PTE
* in the hash table and returns from the exception.
- * Uses r0, r3 - r8, ctr, lr.
+ * Uses r0, r3 - r8, r10, ctr, lr.
*/
.text
_GLOBAL(hash_page)
@@ -106,9 +106,15 @@
addi r5,r5,swapper_pg_dir@l /* kernel page table */
rlwimi r3,r9,32-12,29,29 /* MSR_PR -> _PAGE_USER */
112: add r5,r5,r7 /* convert to phys addr */
+#ifndef CONFIG_PTE_64BIT
rlwimi r5,r4,12,20,29 /* insert top 10 bits of address */
lwz r8,0(r5) /* get pmd entry */
rlwinm. r8,r8,0,0,19 /* extract address of pte page */
+#else
+ rlwinm r8,r4,13,19,29 /* Compute pgdir/pmd offset */
+ lwzx r8,r8,r5 /* Get L1 entry */
+ rlwinm. r8,r8,0,0,20 /* extract pt base address */
+#endif
#ifdef CONFIG_SMP
beq- hash_page_out /* return if no mapping */
#else
@@ -118,7 +124,11 @@
to the address following the rfi. */
beqlr-
#endif
+#ifndef CONFIG_PTE_64BIT
rlwimi r8,r4,22,20,29 /* insert next 10 bits of address */
+#else
+ rlwimi r8,r4,23,20,28 /* compute pte address */
+#endif
rlwinm r0,r3,32-3,24,24 /* _PAGE_RW access -> _PAGE_DIRTY */
ori r0,r0,_PAGE_ACCESSED|_PAGE_HASHPTE
@@ -127,9 +137,15 @@
* because almost always, there won't be a permission violation
* and there won't already be an HPTE, and thus we will have
* to update the PTE to set _PAGE_HASHPTE. -- paulus.
+ *
+ * If PTE_64BIT is set, the low word is the flags word; use that
+ * word for locking since it contains all the interesting bits.
*/
+#if (PTE_FLAGS_OFFSET != 0)
+ addi r8,r8,PTE_FLAGS_OFFSET
+#endif
retry:
- lwarx r6,0,r8 /* get linux-style pte */
+ lwarx r6,0,r8 /* get linux-style pte, flag word */
andc. r5,r3,r6 /* check access & ~permission */
#ifdef CONFIG_SMP
bne- hash_page_out /* return if access not permitted */
@@ -137,6 +153,15 @@
bnelr-
#endif
or r5,r0,r6 /* set accessed/dirty bits */
+#ifdef CONFIG_PTE_64BIT
+#ifdef CONFIG_SMP
+ subf r10,r6,r8 /* create false data dependency */
+ subi r10,r10,PTE_FLAGS_OFFSET
+ lwzx r10,r6,r10 /* Get upper PTE word */
+#else
+ lwz r10,-PTE_FLAGS_OFFSET(r8)
+#endif /* CONFIG_SMP */
+#endif /* CONFIG_PTE_64BIT */
stwcx. r5,0,r8 /* attempt to update PTE */
bne- retry /* retry if someone got there first */
@@ -203,9 +228,9 @@
* we can't take a hash table miss (assuming the code is
* covered by a BAT). -- paulus
*/
- mfmsr r10
+ mfmsr r9
SYNC
- rlwinm r0,r10,0,17,15 /* clear bit 16 (MSR_EE) */
+ rlwinm r0,r9,0,17,15 /* clear bit 16 (MSR_EE) */
rlwinm r0,r0,0,28,26 /* clear MSR_DR */
mtmsr r0
SYNC_601
@@ -214,14 +239,14 @@
tophys(r7,0)
#ifdef CONFIG_SMP
- addis r9,r7,mmu_hash_lock@ha
- addi r9,r9,mmu_hash_lock@l
-10: lwarx r0,0,r9 /* take the mmu_hash_lock */
+ addis r6,r7,mmu_hash_lock@ha
+ addi r6,r6,mmu_hash_lock@l
+10: lwarx r0,0,r6 /* take the mmu_hash_lock */
cmpi 0,r0,0
bne- 11f
- stwcx. r8,0,r9
+ stwcx. r8,0,r6
beq+ 12f
-11: lwz r0,0(r9)
+11: lwz r0,0(r6)
cmpi 0,r0,0
beq 10b
b 11b
@@ -234,10 +259,24 @@
* HPTE, so we just unlock and return.
*/
mr r8,r5
+#ifndef CONFIG_PTE_64BIT
rlwimi r8,r4,22,20,29
+#else
+ rlwimi r8,r4,23,20,28
+ addi r8,r8,PTE_FLAGS_OFFSET
+#endif
1: lwarx r6,0,r8
andi. r0,r6,_PAGE_HASHPTE
bne 9f /* if HASHPTE already set, done */
+#ifdef CONFIG_PTE_64BIT
+#ifdef CONFIG_SMP
+ subf r10,r6,r8 /* create false data dependency */
+ subi r10,r10,PTE_FLAGS_OFFSET
+ lwzx r10,r6,r10 /* Get upper PTE word */
+#else
+ lwz r10,-PTE_FLAGS_OFFSET(r8)
+#endif /* CONFIG_SMP */
+#endif /* CONFIG_PTE_64BIT */
ori r5,r6,_PAGE_HASHPTE
stwcx. r5,0,r8
bne- 1b
@@ -246,13 +285,15 @@
9:
#ifdef CONFIG_SMP
+ addis r6,r7,mmu_hash_lock@ha
+ addi r6,r6,mmu_hash_lock@l
eieio
li r0,0
- stw r0,0(r9) /* clear mmu_hash_lock */
+ stw r0,0(r6) /* clear mmu_hash_lock */
#endif
/* reenable interrupts and DR */
- mtmsr r10
+ mtmsr r9
SYNC_601
isync
@@ -267,7 +308,8 @@
* r5 contains the linux PTE, r6 contains the old value of the
* linux PTE (before setting _PAGE_HASHPTE) and r7 contains the
* offset to be added to addresses (0 if the MMU is on,
- * -KERNELBASE if it is off).
+ * -KERNELBASE if it is off). r10 contains the upper half of
+ * the PTE if CONFIG_PTE_64BIT.
* On SMP, the caller should have the mmu_hash_lock held.
* We assume that the caller has (or will) set the _PAGE_HASHPTE
* bit in the linux PTE in memory. The value passed in r6 should
@@ -285,7 +327,7 @@
Hash_msk = (((1 << Hash_bits) - 1) * 64)
/* defines for the PTE format for 32-bit PPCs */
-#define PTE_SIZE 8
+#define HPTE_SIZE 8
#define PTEG_SIZE 64
#define LG_PTEG_SIZE 6
#define LDPTEu lwzu
@@ -313,6 +355,11 @@
BEGIN_FTR_SECTION
ori r8,r8,_PAGE_COHERENT /* set M (coherence required) */
END_FTR_SECTION_IFSET(CPU_FTR_NEED_COHERENT)
+#ifdef CONFIG_PTE_64BIT
+ /* Put the XPN bits into the PTE */
+ rlwimi r8,r10,8,20,22
+ rlwimi r8,r10,2,29,29
+#endif
/* Construct the high word of the PPC-style PTE (r5) */
rlwinm r5,r3,7,1,24 /* put VSID in 0x7fffff80 bits */
@@ -342,8 +389,8 @@
/* Search the primary PTEG for a PTE whose 1st (d)word matches r5 */
mtctr r0
- addi r4,r3,-PTE_SIZE
-1: LDPTEu r6,PTE_SIZE(r4) /* get next PTE */
+ addi r4,r3,-HPTE_SIZE
+1: LDPTEu r6,HPTE_SIZE(r4) /* get next PTE */
CMPPTE 0,r6,r5
bdnzf 2,1b /* loop while ctr != 0 && !cr0.eq */
beq+ found_slot
@@ -353,9 +400,9 @@
_GLOBAL(hash_page_patch_B)
xoris r4,r3,Hash_msk>>16 /* compute secondary hash */
xori r4,r4,(-PTEG_SIZE & 0xffff)
- addi r4,r4,-PTE_SIZE
+ addi r4,r4,-HPTE_SIZE
mtctr r0
-2: LDPTEu r6,PTE_SIZE(r4)
+2: LDPTEu r6,HPTE_SIZE(r4)
CMPPTE 0,r6,r5
bdnzf 2,2b
beq+ found_slot
@@ -363,8 +410,8 @@
/* Search the primary PTEG for an empty slot */
10: mtctr r0
- addi r4,r3,-PTE_SIZE /* search primary PTEG */
-1: LDPTEu r6,PTE_SIZE(r4) /* get next PTE */
+ addi r4,r3,-HPTE_SIZE /* search primary PTEG */
+1: LDPTEu r6,HPTE_SIZE(r4) /* get next PTE */
TST_V(r6) /* test valid bit */
bdnzf 2,1b /* loop while ctr != 0 && !cr0.eq */
beq+ found_empty
@@ -380,9 +427,9 @@
_GLOBAL(hash_page_patch_C)
xoris r4,r3,Hash_msk>>16 /* compute secondary hash */
xori r4,r4,(-PTEG_SIZE & 0xffff)
- addi r4,r4,-PTE_SIZE
+ addi r4,r4,-HPTE_SIZE
mtctr r0
-2: LDPTEu r6,PTE_SIZE(r4)
+2: LDPTEu r6,HPTE_SIZE(r4)
TST_V(r6)
bdnzf 2,2b
beq+ found_empty
@@ -409,11 +456,11 @@
1: addis r4,r7,next_slot@ha /* get next evict slot */
lwz r6,next_slot@l(r4)
- addi r6,r6,PTE_SIZE /* search for candidate */
- andi. r6,r6,7*PTE_SIZE
+ addi r6,r6,HPTE_SIZE /* search for candidate */
+ andi. r6,r6,7*HPTE_SIZE
stw r6,next_slot@l(r4)
add r4,r3,r6
- LDPTE r0,PTE_SIZE/2(r4) /* get PTE second word */
+ LDPTE r0,HPTE_SIZE/2(r4) /* get PTE second word */
clrrwi r0,r0,12
lis r6,etext@h
ori r6,r6,etext@l /* get etext */
@@ -426,7 +473,7 @@
found_empty:
STPTE r5,0(r4)
found_slot:
- STPTE r8,PTE_SIZE/2(r4)
+ STPTE r8,HPTE_SIZE/2(r4)
#else /* CONFIG_SMP */
/*
@@ -452,7 +499,7 @@
STPTE r5,0(r4)
sync
TLBSYNC
- STPTE r8,PTE_SIZE/2(r4) /* put in correct RPN, WIMG, PP bits */
+ STPTE r8,HPTE_SIZE/2(r4) /* put in correct RPN, WIMG, PP bits */
sync
SET_V(r5)
STPTE r5,0(r4) /* finally set V bit in PTE */
@@ -499,14 +546,18 @@
isync
/* First find a PTE in the range that has _PAGE_HASHPTE set */
+#ifndef CONFIG_PTE_64BIT
rlwimi r5,r4,22,20,29
-1: lwz r0,0(r5)
+#else
+ rlwimi r5,r4,23,20,28
+#endif
+1: lwz r0,PTE_FLAGS_OFFSET(r5)
cmpwi cr1,r6,1
andi. r0,r0,_PAGE_HASHPTE
bne 2f
ble cr1,19f
addi r4,r4,0x1000
- addi r5,r5,4
+ addi r5,r5,PTE_SIZE
addi r6,r6,-1
b 1b
@@ -545,7 +596,10 @@
* already clear, we're done (for this pte). If not,
* clear it (atomically) and proceed. -- paulus.
*/
-33: lwarx r8,0,r5 /* fetch the pte */
+#if (PTE_FLAGS_OFFSET != 0)
+ addi r5,r5,PTE_FLAGS_OFFSET
+#endif
+33: lwarx r8,0,r5 /* fetch the pte flags word */
andi. r0,r8,_PAGE_HASHPTE
beq 8f /* done if HASHPTE is already clear */
rlwinm r8,r8,0,31,29 /* clear HASHPTE bit */
@@ -562,8 +616,8 @@
/* Search the primary PTEG for a PTE whose 1st (d)word matches r5 */
li r0,8 /* PTEs/group */
mtctr r0
- addi r12,r8,-PTE_SIZE
-1: LDPTEu r0,PTE_SIZE(r12) /* get next PTE */
+ addi r12,r8,-HPTE_SIZE
+1: LDPTEu r0,HPTE_SIZE(r12) /* get next PTE */
CMPPTE 0,r0,r11
bdnzf 2,1b /* loop while ctr != 0 && !cr0.eq */
beq+ 3f
@@ -574,9 +628,9 @@
_GLOBAL(flush_hash_patch_B)
xoris r12,r8,Hash_msk>>16 /* compute secondary hash */
xori r12,r12,(-PTEG_SIZE & 0xffff)
- addi r12,r12,-PTE_SIZE
+ addi r12,r12,-HPTE_SIZE
mtctr r0
-2: LDPTEu r0,PTE_SIZE(r12)
+2: LDPTEu r0,HPTE_SIZE(r12)
CMPPTE 0,r0,r11
bdnzf 2,2b
xori r11,r11,PTE_H /* clear H again */
@@ -590,7 +644,7 @@
8: ble cr1,9f /* if all ptes checked */
81: addi r6,r6,-1
- addi r5,r5,4 /* advance to next pte */
+ addi r5,r5,PTE_SIZE
addi r4,r4,0x1000
lwz r0,0(r5) /* check next pte */
cmpwi cr1,r6,1
diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index 8920eea..5c64af1 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -194,7 +194,7 @@
unsigned long tprot = prot;
/* Make kernel text executable */
- if (in_kernel_text(vaddr))
+ if (overlaps_kernel_text(vaddr, vaddr + step))
tprot &= ~HPTE_R_N;
hash = hpt_hash(va, shift, ssize);
@@ -348,6 +348,7 @@
return 0;
}
+#ifdef CONFIG_HUGETLB_PAGE
/* Scan for 16G memory blocks that have been set aside for huge pages
* and reserve those blocks for 16G huge pages.
*/
@@ -385,6 +386,7 @@
add_gpage(phys_addr, block_size, expected_pages);
return 0;
}
+#endif /* CONFIG_HUGETLB_PAGE */
static void __init htab_init_page_sizes(void)
{
@@ -539,7 +541,7 @@
void create_section_mapping(unsigned long start, unsigned long end)
{
BUG_ON(htab_bolt_mapping(start, end, __pa(start),
- PAGE_KERNEL, mmu_linear_psize,
+ pgprot_val(PAGE_KERNEL), mmu_linear_psize,
mmu_kernel_ssize));
}
@@ -647,7 +649,7 @@
mtspr(SPRN_SDR1, _SDR1);
}
- prot = PAGE_KERNEL;
+ prot = pgprot_val(PAGE_KERNEL);
#ifdef CONFIG_DEBUG_PAGEALLOC
linear_map_hash_count = lmb_end_of_DRAM() >> PAGE_SHIFT;
diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index f1c2d55..a117024 100644
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -128,29 +128,37 @@
return 0;
}
-/* Base page size affects how we walk hugetlb page tables */
-#ifdef CONFIG_PPC_64K_PAGES
-#define hpmd_offset(pud, addr, h) pmd_offset(pud, addr)
-#define hpmd_alloc(mm, pud, addr, h) pmd_alloc(mm, pud, addr)
-#else
-static inline
-pmd_t *hpmd_offset(pud_t *pud, unsigned long addr, struct hstate *hstate)
+
+static pud_t *hpud_offset(pgd_t *pgd, unsigned long addr, struct hstate *hstate)
{
- if (huge_page_shift(hstate) == PAGE_SHIFT_64K)
+ if (huge_page_shift(hstate) < PUD_SHIFT)
+ return pud_offset(pgd, addr);
+ else
+ return (pud_t *) pgd;
+}
+static pud_t *hpud_alloc(struct mm_struct *mm, pgd_t *pgd, unsigned long addr,
+ struct hstate *hstate)
+{
+ if (huge_page_shift(hstate) < PUD_SHIFT)
+ return pud_alloc(mm, pgd, addr);
+ else
+ return (pud_t *) pgd;
+}
+static pmd_t *hpmd_offset(pud_t *pud, unsigned long addr, struct hstate *hstate)
+{
+ if (huge_page_shift(hstate) < PMD_SHIFT)
return pmd_offset(pud, addr);
else
return (pmd_t *) pud;
}
-static inline
-pmd_t *hpmd_alloc(struct mm_struct *mm, pud_t *pud, unsigned long addr,
- struct hstate *hstate)
+static pmd_t *hpmd_alloc(struct mm_struct *mm, pud_t *pud, unsigned long addr,
+ struct hstate *hstate)
{
- if (huge_page_shift(hstate) == PAGE_SHIFT_64K)
+ if (huge_page_shift(hstate) < PMD_SHIFT)
return pmd_alloc(mm, pud, addr);
else
return (pmd_t *) pud;
}
-#endif
/* Build list of addresses of gigantic pages. This function is used in early
* boot before the buddy or bootmem allocator is setup.
@@ -204,7 +212,7 @@
pg = pgd_offset(mm, addr);
if (!pgd_none(*pg)) {
- pu = pud_offset(pg, addr);
+ pu = hpud_offset(pg, addr, hstate);
if (!pud_none(*pu)) {
pm = hpmd_offset(pu, addr, hstate);
if (!pmd_none(*pm))
@@ -233,7 +241,7 @@
addr &= hstate->mask;
pg = pgd_offset(mm, addr);
- pu = pud_alloc(mm, pg, addr);
+ pu = hpud_alloc(mm, pg, addr, hstate);
if (pu) {
pm = hpmd_alloc(mm, pu, addr, hstate);
@@ -316,13 +324,7 @@
pud = pud_offset(pgd, addr);
do {
next = pud_addr_end(addr, end);
-#ifdef CONFIG_PPC_64K_PAGES
- if (pud_none_or_clear_bad(pud))
- continue;
- hugetlb_free_pmd_range(tlb, pud, addr, next, floor, ceiling,
- psize);
-#else
- if (shift == PAGE_SHIFT_64K) {
+ if (shift < PMD_SHIFT) {
if (pud_none_or_clear_bad(pud))
continue;
hugetlb_free_pmd_range(tlb, pud, addr, next, floor,
@@ -332,7 +334,6 @@
continue;
free_hugepte_range(tlb, (hugepd_t *)pud, psize);
}
-#endif
} while (pud++, addr = next, addr != end);
start &= PGDIR_MASK;
@@ -422,9 +423,15 @@
psize = get_slice_psize(tlb->mm, addr);
BUG_ON(!mmu_huge_psizes[psize]);
next = pgd_addr_end(addr, end);
- if (pgd_none_or_clear_bad(pgd))
- continue;
- hugetlb_free_pud_range(tlb, pgd, addr, next, floor, ceiling);
+ if (mmu_psize_to_shift(psize) < PUD_SHIFT) {
+ if (pgd_none_or_clear_bad(pgd))
+ continue;
+ hugetlb_free_pud_range(tlb, pgd, addr, next, floor, ceiling);
+ } else {
+ if (pgd_none(*pgd))
+ continue;
+ free_hugepte_range(tlb, (hugepd_t *)pgd, psize);
+ }
} while (pgd++, addr = next, addr != end);
}
diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c
index 036fe2f..3e6a654 100644
--- a/arch/powerpc/mm/init_64.c
+++ b/arch/powerpc/mm/init_64.c
@@ -228,8 +228,8 @@
start, p, __pa(p));
mapped = htab_bolt_mapping(start, start + page_size, __pa(p),
- PAGE_KERNEL, mmu_vmemmap_psize,
- mmu_kernel_ssize);
+ pgprot_val(PAGE_KERNEL),
+ mmu_vmemmap_psize, mmu_kernel_ssize);
BUG_ON(mapped < 0);
}
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index 1c93c25..98d7bf9 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -75,11 +75,10 @@
int page_is_ram(unsigned long pfn)
{
- unsigned long paddr = (pfn << PAGE_SHIFT);
-
#ifndef CONFIG_PPC64 /* XXX for now */
- return paddr < __pa(high_memory);
+ return pfn < max_pfn;
#else
+ unsigned long paddr = (pfn << PAGE_SHIFT);
int i;
for (i=0; i < lmb.memory.cnt; i++) {
unsigned long base;
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index d9a1813..6cf5c71 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -89,6 +89,46 @@
return 0;
}
+/*
+ * get_active_region_work_fn - A helper function for get_node_active_region
+ * Returns datax set to the start_pfn and end_pfn if they contain
+ * the initial value of datax->start_pfn between them
+ * @start_pfn: start page(inclusive) of region to check
+ * @end_pfn: end page(exclusive) of region to check
+ * @datax: comes in with ->start_pfn set to value to search for and
+ * goes out with active range if it contains it
+ * Returns 1 if search value is in range else 0
+ */
+static int __init get_active_region_work_fn(unsigned long start_pfn,
+ unsigned long end_pfn, void *datax)
+{
+ struct node_active_region *data;
+ data = (struct node_active_region *)datax;
+
+ if (start_pfn <= data->start_pfn && end_pfn > data->start_pfn) {
+ data->start_pfn = start_pfn;
+ data->end_pfn = end_pfn;
+ return 1;
+ }
+ return 0;
+
+}
+
+/*
+ * get_node_active_region - Return active region containing start_pfn
+ * @start_pfn: The page to return the region for.
+ * @node_ar: Returned set to the active region containing start_pfn
+ */
+static void __init get_node_active_region(unsigned long start_pfn,
+ struct node_active_region *node_ar)
+{
+ int nid = early_pfn_to_nid(start_pfn);
+
+ node_ar->nid = nid;
+ node_ar->start_pfn = start_pfn;
+ work_with_active_regions(nid, get_active_region_work_fn, node_ar);
+}
+
static void __cpuinit map_cpu_to_node(int cpu, int node)
{
numa_cpu_lookup_table[cpu] = node;
@@ -150,6 +190,21 @@
return of_get_property(dev, "ibm,associativity", NULL);
}
+/*
+ * Returns the property linux,drconf-usable-memory if
+ * it exists (the property exists only in kexec/kdump kernels,
+ * added by kexec-tools)
+ */
+static const u32 *of_get_usable_memory(struct device_node *memory)
+{
+ const u32 *prop;
+ u32 len;
+ prop = of_get_property(memory, "linux,drconf-usable-memory", &len);
+ if (!prop || len < sizeof(unsigned int))
+ return 0;
+ return prop;
+}
+
/* Returns nid in the range [0..MAX_NUMNODES-1], or -1 if no useful numa
* info is found.
*/
@@ -487,14 +542,29 @@
}
/*
+ * Reads the counter for a given entry in
+ * linux,drconf-usable-memory property
+ */
+static inline int __init read_usm_ranges(const u32 **usm)
+{
+ /*
+ * For each lmb in ibm,dynamic-memory a corresponding
+ * entry in linux,drconf-usable-memory property contains
+ * a counter followed by that many (base, size) duple.
+ * read the counter from linux,drconf-usable-memory
+ */
+ return read_n_cells(n_mem_size_cells, usm);
+}
+
+/*
* Extract NUMA information from the ibm,dynamic-reconfiguration-memory
* node. This assumes n_mem_{addr,size}_cells have been set.
*/
static void __init parse_drconf_memory(struct device_node *memory)
{
- const u32 *dm;
- unsigned int n, rc;
- unsigned long lmb_size, size;
+ const u32 *dm, *usm;
+ unsigned int n, rc, ranges, is_kexec_kdump = 0;
+ unsigned long lmb_size, base, size, sz;
int nid;
struct assoc_arrays aa;
@@ -510,6 +580,11 @@
if (rc)
return;
+ /* check if this is a kexec/kdump kernel */
+ usm = of_get_usable_memory(memory);
+ if (usm != NULL)
+ is_kexec_kdump = 1;
+
for (; n != 0; --n) {
struct of_drconf_cell drmem;
@@ -521,21 +596,31 @@
|| !(drmem.flags & DRCONF_MEM_ASSIGNED))
continue;
- nid = of_drconf_to_nid_single(&drmem, &aa);
+ base = drmem.base_addr;
+ size = lmb_size;
+ ranges = 1;
- fake_numa_create_new_node(
- ((drmem.base_addr + lmb_size) >> PAGE_SHIFT),
+ if (is_kexec_kdump) {
+ ranges = read_usm_ranges(&usm);
+ if (!ranges) /* there are no (base, size) duple */
+ continue;
+ }
+ do {
+ if (is_kexec_kdump) {
+ base = read_n_cells(n_mem_addr_cells, &usm);
+ size = read_n_cells(n_mem_size_cells, &usm);
+ }
+ nid = of_drconf_to_nid_single(&drmem, &aa);
+ fake_numa_create_new_node(
+ ((base + size) >> PAGE_SHIFT),
&nid);
-
- node_set_online(nid);
-
- size = numa_enforce_memory_limit(drmem.base_addr, lmb_size);
- if (!size)
- continue;
-
- add_active_range(nid, drmem.base_addr >> PAGE_SHIFT,
- (drmem.base_addr >> PAGE_SHIFT)
- + (size >> PAGE_SHIFT));
+ node_set_online(nid);
+ sz = numa_enforce_memory_limit(base, size);
+ if (sz)
+ add_active_range(nid, base >> PAGE_SHIFT,
+ (base >> PAGE_SHIFT)
+ + (sz >> PAGE_SHIFT));
+ } while (--ranges);
}
}
@@ -837,38 +922,50 @@
start_pfn, end_pfn);
free_bootmem_with_active_regions(nid, end_pfn);
+ }
- /* Mark reserved regions on this node */
- for (i = 0; i < lmb.reserved.cnt; i++) {
- unsigned long physbase = lmb.reserved.region[i].base;
- unsigned long size = lmb.reserved.region[i].size;
- unsigned long start_paddr = start_pfn << PAGE_SHIFT;
- unsigned long end_paddr = end_pfn << PAGE_SHIFT;
+ /* Mark reserved regions */
+ for (i = 0; i < lmb.reserved.cnt; i++) {
+ unsigned long physbase = lmb.reserved.region[i].base;
+ unsigned long size = lmb.reserved.region[i].size;
+ unsigned long start_pfn = physbase >> PAGE_SHIFT;
+ unsigned long end_pfn = ((physbase + size) >> PAGE_SHIFT);
+ struct node_active_region node_ar;
- if (early_pfn_to_nid(physbase >> PAGE_SHIFT) != nid &&
- early_pfn_to_nid((physbase+size-1) >> PAGE_SHIFT) != nid)
- continue;
+ get_node_active_region(start_pfn, &node_ar);
+ while (start_pfn < end_pfn) {
+ /*
+ * if reserved region extends past active region
+ * then trim size to active region
+ */
+ if (end_pfn > node_ar.end_pfn)
+ size = (node_ar.end_pfn << PAGE_SHIFT)
+ - (start_pfn << PAGE_SHIFT);
+ dbg("reserve_bootmem %lx %lx nid=%d\n", physbase, size,
+ node_ar.nid);
+ reserve_bootmem_node(NODE_DATA(node_ar.nid), physbase,
+ size, BOOTMEM_DEFAULT);
+ /*
+ * if reserved region is contained in the active region
+ * then done.
+ */
+ if (end_pfn <= node_ar.end_pfn)
+ break;
- if (physbase < end_paddr &&
- (physbase+size) > start_paddr) {
- /* overlaps */
- if (physbase < start_paddr) {
- size -= start_paddr - physbase;
- physbase = start_paddr;
- }
-
- if (size > end_paddr - physbase)
- size = end_paddr - physbase;
-
- dbg("reserve_bootmem %lx %lx\n", physbase,
- size);
- reserve_bootmem_node(NODE_DATA(nid), physbase,
- size, BOOTMEM_DEFAULT);
- }
+ /*
+ * reserved region extends past the active region
+ * get next active region that contains this
+ * reserved region
+ */
+ start_pfn = node_ar.end_pfn;
+ physbase = start_pfn << PAGE_SHIFT;
+ get_node_active_region(start_pfn, &node_ar);
}
- sparse_memory_present_with_active_regions(nid);
}
+
+ for_each_online_node(nid)
+ sparse_memory_present_with_active_regions(nid);
}
void __init paging_init(void)
diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c
index 2001abd..c31d6d2 100644
--- a/arch/powerpc/mm/pgtable_32.c
+++ b/arch/powerpc/mm/pgtable_32.c
@@ -73,7 +73,7 @@
#endif /* HAVE_TLBCAM */
#ifdef CONFIG_PTE_64BIT
-/* 44x uses an 8kB pgdir because it has 8-byte Linux PTEs. */
+/* Some processors use an 8kB pgdir because they have 8-byte Linux PTEs. */
#define PGDIR_ORDER 1
#else
#define PGDIR_ORDER 0
@@ -288,7 +288,7 @@
}
/*
- * Map in all of physical memory starting at KERNELBASE.
+ * Map in a big chunk of physical memory starting at KERNELBASE.
*/
void __init mapin_ram(void)
{
diff --git a/arch/powerpc/mm/tlb_32.c b/arch/powerpc/mm/tlb_32.c
index eb4b512..f9a47fe 100644
--- a/arch/powerpc/mm/tlb_32.c
+++ b/arch/powerpc/mm/tlb_32.c
@@ -45,6 +45,7 @@
flush_hash_pages(mm->context.id, addr, ptephys, 1);
}
}
+EXPORT_SYMBOL(flush_hash_entry);
/*
* Called by ptep_set_access_flags, must flush on CPUs for which the
diff --git a/arch/powerpc/oprofile/cell/vma_map.c b/arch/powerpc/oprofile/cell/vma_map.c
index fff6666..258fa44 100644
--- a/arch/powerpc/oprofile/cell/vma_map.c
+++ b/arch/powerpc/oprofile/cell/vma_map.c
@@ -229,7 +229,7 @@
*/
overlay_tbl_offset = vma_map_lookup(map, ovly_table_sym,
aSpu, &grd_val);
- if (overlay_tbl_offset < 0) {
+ if (overlay_tbl_offset > 0x10000000) {
printk(KERN_ERR "SPU_PROF: "
"%s, line %d: Error finding SPU overlay table\n",
__func__, __LINE__);
diff --git a/arch/powerpc/oprofile/op_model_power4.c b/arch/powerpc/oprofile/op_model_power4.c
index 446a8bbb..3e3d91f 100644
--- a/arch/powerpc/oprofile/op_model_power4.c
+++ b/arch/powerpc/oprofile/op_model_power4.c
@@ -64,7 +64,7 @@
return 0;
}
-extern void ppc64_enable_pmcs(void);
+extern void ppc_enable_pmcs(void);
/*
* Older CPUs require the MMCRA sample bit to be always set, but newer
@@ -91,7 +91,7 @@
unsigned int mmcr0 = mmcr0_val;
unsigned long mmcra = mmcra_val;
- ppc64_enable_pmcs();
+ ppc_enable_pmcs();
/* set the freeze bit */
mmcr0 |= MMCR0_FC;
diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig
index 249ba01..79c1154 100644
--- a/arch/powerpc/platforms/44x/Kconfig
+++ b/arch/powerpc/platforms/44x/Kconfig
@@ -2,6 +2,7 @@
bool "Bamboo"
depends on 44x
default n
+ select PPC44x_SIMPLE
select 440EP
select PCI
help
@@ -30,6 +31,7 @@
bool "Sequoia"
depends on 44x
default n
+ select PPC44x_SIMPLE
select 440EPX
help
This option enables support for the AMCC PPC440EPX evaluation board.
@@ -38,6 +40,7 @@
bool "Taishan"
depends on 44x
default n
+ select PPC44x_SIMPLE
select 440GX
select PCI
help
@@ -48,6 +51,7 @@
bool "Katmai"
depends on 44x
default n
+ select PPC44x_SIMPLE
select 440SPe
select PCI
select PPC4xx_PCI_EXPRESS
@@ -58,6 +62,7 @@
bool "Rainier"
depends on 44x
default n
+ select PPC44x_SIMPLE
select 440GRX
select PCI
help
@@ -76,20 +81,48 @@
See http://www.pikatechnologies.com/ and follow the "PIKA for Computer
Telephony Developers" link for more information.
+config ARCHES
+ bool "Arches"
+ depends on 44x
+ default n
+ select PPC44x_SIMPLE
+ select 460EX # Odd since it uses 460GT but the effects are the same
+ select PCI
+ select PPC4xx_PCI_EXPRESS
+ help
+ This option enables support for the AMCC Dual PPC460GT evaluation board.
+
config CANYONLANDS
bool "Canyonlands"
depends on 44x
default n
+ select PPC44x_SIMPLE
select 460EX
select PCI
select PPC4xx_PCI_EXPRESS
+ select IBM_NEW_EMAC_RGMII
+ select IBM_NEW_EMAC_ZMII
help
This option enables support for the AMCC PPC460EX evaluation board.
+config GLACIER
+ bool "Glacier"
+ depends on 44x
+ default n
+ select PPC44x_SIMPLE
+ select 460EX # Odd since it uses 460GT but the effects are the same
+ select PCI
+ select PPC4xx_PCI_EXPRESS
+ select IBM_NEW_EMAC_RGMII
+ select IBM_NEW_EMAC_ZMII
+ help
+ This option enables support for the AMCC PPC460GT evaluation board.
+
config YOSEMITE
bool "Yosemite"
depends on 44x
default n
+ select PPC44x_SIMPLE
select 440EP
select PCI
help
@@ -127,6 +160,13 @@
Most Virtex 5 designs should use this unless it needs to do some
special configuration at board probe time.
+config PPC44x_SIMPLE
+ bool "Simple PowerPC 44x board support"
+ depends on 44x
+ default n
+ help
+ This option enables the simple PowerPC 44x platform support.
+
# 44x specific CPU modules, selected based on the board above.
config 440EP
bool
@@ -170,8 +210,6 @@
bool
select PPC_FPU
select IBM_NEW_EMAC_EMAC4
- select IBM_NEW_EMAC_RGMII
- select IBM_NEW_EMAC_ZMII
select IBM_NEW_EMAC_TAH
# 44x errata/workaround config symbols, selected by the CPU models above
diff --git a/arch/powerpc/platforms/44x/Makefile b/arch/powerpc/platforms/44x/Makefile
index 8d0b1a1..6981331 100644
--- a/arch/powerpc/platforms/44x/Makefile
+++ b/arch/powerpc/platforms/44x/Makefile
@@ -1,13 +1,7 @@
obj-$(CONFIG_44x) := misc_44x.o idle.o
+obj-$(CONFIG_PPC44x_SIMPLE) += ppc44x_simple.o
obj-$(CONFIG_EBONY) += ebony.o
-obj-$(CONFIG_TAISHAN) += taishan.o
-obj-$(CONFIG_BAMBOO) += bamboo.o
-obj-$(CONFIG_YOSEMITE) += bamboo.o
obj-$(CONFIG_SAM440EP) += sam440ep.o
-obj-$(CONFIG_SEQUOIA) += sequoia.o
-obj-$(CONFIG_KATMAI) += katmai.o
-obj-$(CONFIG_RAINIER) += rainier.o
obj-$(CONFIG_WARP) += warp.o
obj-$(CONFIG_WARP) += warp-nand.o
-obj-$(CONFIG_CANYONLANDS) += canyonlands.o
obj-$(CONFIG_XILINX_VIRTEX_5_FXT) += virtex.o
diff --git a/arch/powerpc/platforms/44x/bamboo.c b/arch/powerpc/platforms/44x/bamboo.c
deleted file mode 100644
index cef169e..0000000
--- a/arch/powerpc/platforms/44x/bamboo.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * Bamboo board specific routines
- *
- * Wade Farnsworth <wfarnsworth@mvista.com>
- * Copyright 2004 MontaVista Software Inc.
- *
- * Rewritten and ported to the merged powerpc tree:
- * Josh Boyer <jwboyer@linux.vnet.ibm.com>
- * Copyright 2007 IBM Corporation
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-#include <linux/init.h>
-#include <linux/of_platform.h>
-
-#include <asm/machdep.h>
-#include <asm/prom.h>
-#include <asm/udbg.h>
-#include <asm/time.h>
-#include <asm/uic.h>
-#include <asm/pci-bridge.h>
-#include <asm/ppc4xx.h>
-
-static __initdata struct of_device_id bamboo_of_bus[] = {
- { .compatible = "ibm,plb4", },
- { .compatible = "ibm,opb", },
- { .compatible = "ibm,ebc", },
- {},
-};
-
-static int __init bamboo_device_probe(void)
-{
- of_platform_bus_probe(NULL, bamboo_of_bus, NULL);
-
- return 0;
-}
-machine_device_initcall(bamboo, bamboo_device_probe);
-
-static int __init bamboo_probe(void)
-{
- unsigned long root = of_get_flat_dt_root();
-
- if (!of_flat_dt_is_compatible(root, "amcc,bamboo"))
- return 0;
-
- ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC;
-
- return 1;
-}
-
-define_machine(bamboo) {
- .name = "Bamboo",
- .probe = bamboo_probe,
- .progress = udbg_progress,
- .init_IRQ = uic_init_tree,
- .get_irq = uic_get_irq,
- .restart = ppc4xx_reset_system,
- .calibrate_decr = generic_calibrate_decr,
-};
diff --git a/arch/powerpc/platforms/44x/canyonlands.c b/arch/powerpc/platforms/44x/canyonlands.c
deleted file mode 100644
index 3949289..0000000
--- a/arch/powerpc/platforms/44x/canyonlands.c
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * Canyonlands board specific routines
- *
- * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
- *
- * Based on the Katmai code by
- * Benjamin Herrenschmidt <benh@kernel.crashing.org>
- * Copyright 2007 IBM Corp.
- * Josh Boyer <jwboyer@linux.vnet.ibm.com>
- * Copyright 2007 IBM Corporation
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-#include <linux/init.h>
-#include <linux/of_platform.h>
-
-#include <asm/machdep.h>
-#include <asm/prom.h>
-#include <asm/udbg.h>
-#include <asm/time.h>
-#include <asm/uic.h>
-#include <asm/pci-bridge.h>
-#include <asm/ppc4xx.h>
-
-static __initdata struct of_device_id canyonlands_of_bus[] = {
- { .compatible = "ibm,plb4", },
- { .compatible = "ibm,opb", },
- { .compatible = "ibm,ebc", },
- {},
-};
-
-static int __init canyonlands_device_probe(void)
-{
- of_platform_bus_probe(NULL, canyonlands_of_bus, NULL);
-
- return 0;
-}
-machine_device_initcall(canyonlands, canyonlands_device_probe);
-
-static int __init canyonlands_probe(void)
-{
- unsigned long root = of_get_flat_dt_root();
-
- if (!of_flat_dt_is_compatible(root, "amcc,canyonlands"))
- return 0;
-
- ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC;
-
- return 1;
-}
-
-define_machine(canyonlands) {
- .name = "Canyonlands",
- .probe = canyonlands_probe,
- .progress = udbg_progress,
- .init_IRQ = uic_init_tree,
- .get_irq = uic_get_irq,
- .restart = ppc4xx_reset_system,
- .calibrate_decr = generic_calibrate_decr,
-};
diff --git a/arch/powerpc/platforms/44x/katmai.c b/arch/powerpc/platforms/44x/katmai.c
deleted file mode 100644
index 44f4b3a..0000000
--- a/arch/powerpc/platforms/44x/katmai.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * Katmai board specific routines
- *
- * Benjamin Herrenschmidt <benh@kernel.crashing.org>
- * Copyright 2007 IBM Corp.
- *
- * Based on the Bamboo code by
- * Josh Boyer <jwboyer@linux.vnet.ibm.com>
- * Copyright 2007 IBM Corporation
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-#include <linux/init.h>
-#include <linux/of_platform.h>
-
-#include <asm/machdep.h>
-#include <asm/prom.h>
-#include <asm/udbg.h>
-#include <asm/time.h>
-#include <asm/uic.h>
-#include <asm/pci-bridge.h>
-#include <asm/ppc4xx.h>
-
-static __initdata struct of_device_id katmai_of_bus[] = {
- { .compatible = "ibm,plb4", },
- { .compatible = "ibm,opb", },
- { .compatible = "ibm,ebc", },
- {},
-};
-
-static int __init katmai_device_probe(void)
-{
- of_platform_bus_probe(NULL, katmai_of_bus, NULL);
-
- return 0;
-}
-machine_device_initcall(katmai, katmai_device_probe);
-
-static int __init katmai_probe(void)
-{
- unsigned long root = of_get_flat_dt_root();
-
- if (!of_flat_dt_is_compatible(root, "amcc,katmai"))
- return 0;
-
- ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC;
-
- return 1;
-}
-
-define_machine(katmai) {
- .name = "Katmai",
- .probe = katmai_probe,
- .progress = udbg_progress,
- .init_IRQ = uic_init_tree,
- .get_irq = uic_get_irq,
- .restart = ppc4xx_reset_system,
- .calibrate_decr = generic_calibrate_decr,
-};
diff --git a/arch/powerpc/platforms/44x/ppc44x_simple.c b/arch/powerpc/platforms/44x/ppc44x_simple.c
new file mode 100644
index 0000000..2967126
--- /dev/null
+++ b/arch/powerpc/platforms/44x/ppc44x_simple.c
@@ -0,0 +1,88 @@
+/*
+ * Generic PowerPC 44x platform support
+ *
+ * Copyright 2008 IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; version 2 of the License.
+ *
+ * This implements simple platform support for PowerPC 44x chips. This is
+ * mostly used for eval boards or other simple and "generic" 44x boards. If
+ * your board has custom functions or hardware, then you will likely want to
+ * implement your own board.c file to accommodate it.
+ */
+
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <asm/ppc4xx.h>
+#include <asm/prom.h>
+#include <asm/time.h>
+#include <asm/udbg.h>
+#include <asm/uic.h>
+
+#include <linux/init.h>
+#include <linux/of_platform.h>
+
+static __initdata struct of_device_id ppc44x_of_bus[] = {
+ { .compatible = "ibm,plb4", },
+ { .compatible = "ibm,opb", },
+ { .compatible = "ibm,ebc", },
+ { .compatible = "simple-bus", },
+ {},
+};
+
+static int __init ppc44x_device_probe(void)
+{
+ of_platform_bus_probe(NULL, ppc44x_of_bus, NULL);
+
+ return 0;
+}
+machine_device_initcall(ppc44x_simple, ppc44x_device_probe);
+
+/* This is the list of boards that can be supported by this simple
+ * platform code. This does _not_ mean the boards are compatible,
+ * as they most certainly are not from a device tree perspective.
+ * However, their differences are handled by the device tree and the
+ * drivers and therefore they don't need custom board support files.
+ *
+ * Again, if your board needs to do things differently then create a
+ * board.c file for it rather than adding it to this list.
+ */
+static char *board[] __initdata = {
+ "amcc,arches",
+ "amcc,bamboo",
+ "amcc,canyonlands",
+ "amcc,glacier",
+ "ibm,ebony",
+ "amcc,katmai",
+ "amcc,rainier",
+ "amcc,sequoia",
+ "amcc,taishan",
+ "amcc,yosemite"
+};
+
+static int __init ppc44x_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+ int i = 0;
+
+ for (i = 0; i < ARRAY_SIZE(board); i++) {
+ if (of_flat_dt_is_compatible(root, board[i])) {
+ ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC;
+ return 1;
+ }
+ }
+
+ return 0;
+}
+
+define_machine(ppc44x_simple) {
+ .name = "PowerPC 44x Platform",
+ .probe = ppc44x_probe,
+ .progress = udbg_progress,
+ .init_IRQ = uic_init_tree,
+ .get_irq = uic_get_irq,
+ .restart = ppc4xx_reset_system,
+ .calibrate_decr = generic_calibrate_decr,
+};
diff --git a/arch/powerpc/platforms/44x/rainier.c b/arch/powerpc/platforms/44x/rainier.c
deleted file mode 100644
index 4f1ff84..0000000
--- a/arch/powerpc/platforms/44x/rainier.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * Rainier board specific routines
- *
- * Valentine Barshak <vbarshak@ru.mvista.com>
- * Copyright 2007 MontaVista Software Inc.
- *
- * Based on the Bamboo code by
- * Josh Boyer <jwboyer@linux.vnet.ibm.com>
- * Copyright 2007 IBM Corporation
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-#include <linux/init.h>
-#include <linux/of_platform.h>
-
-#include <asm/machdep.h>
-#include <asm/prom.h>
-#include <asm/udbg.h>
-#include <asm/time.h>
-#include <asm/uic.h>
-#include <asm/pci-bridge.h>
-#include <asm/ppc4xx.h>
-
-static __initdata struct of_device_id rainier_of_bus[] = {
- { .compatible = "ibm,plb4", },
- { .compatible = "ibm,opb", },
- { .compatible = "ibm,ebc", },
- {},
-};
-
-static int __init rainier_device_probe(void)
-{
- of_platform_bus_probe(NULL, rainier_of_bus, NULL);
-
- return 0;
-}
-machine_device_initcall(rainier, rainier_device_probe);
-
-static int __init rainier_probe(void)
-{
- unsigned long root = of_get_flat_dt_root();
-
- if (!of_flat_dt_is_compatible(root, "amcc,rainier"))
- return 0;
-
- ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC;
-
- return 1;
-}
-
-define_machine(rainier) {
- .name = "Rainier",
- .probe = rainier_probe,
- .progress = udbg_progress,
- .init_IRQ = uic_init_tree,
- .get_irq = uic_get_irq,
- .restart = ppc4xx_reset_system,
- .calibrate_decr = generic_calibrate_decr,
-};
diff --git a/arch/powerpc/platforms/44x/sequoia.c b/arch/powerpc/platforms/44x/sequoia.c
deleted file mode 100644
index 49eb73d..0000000
--- a/arch/powerpc/platforms/44x/sequoia.c
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * Sequoia board specific routines
- *
- * Valentine Barshak <vbarshak@ru.mvista.com>
- * Copyright 2007 MontaVista Software Inc.
- *
- * Based on the Bamboo code by
- * Josh Boyer <jwboyer@linux.vnet.ibm.com>
- * Copyright 2007 IBM Corporation
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-#include <linux/init.h>
-#include <linux/of_platform.h>
-
-#include <asm/machdep.h>
-#include <asm/prom.h>
-#include <asm/udbg.h>
-#include <asm/time.h>
-#include <asm/uic.h>
-#include <asm/pci-bridge.h>
-
-#include <asm/ppc4xx.h>
-
-static __initdata struct of_device_id sequoia_of_bus[] = {
- { .compatible = "ibm,plb4", },
- { .compatible = "ibm,opb", },
- { .compatible = "ibm,ebc", },
- {},
-};
-
-static int __init sequoia_device_probe(void)
-{
- of_platform_bus_probe(NULL, sequoia_of_bus, NULL);
-
- return 0;
-}
-machine_device_initcall(sequoia, sequoia_device_probe);
-
-static int __init sequoia_probe(void)
-{
- unsigned long root = of_get_flat_dt_root();
-
- if (!of_flat_dt_is_compatible(root, "amcc,sequoia"))
- return 0;
-
- ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC;
-
- return 1;
-}
-
-define_machine(sequoia) {
- .name = "Sequoia",
- .probe = sequoia_probe,
- .progress = udbg_progress,
- .init_IRQ = uic_init_tree,
- .get_irq = uic_get_irq,
- .restart = ppc4xx_reset_system,
- .calibrate_decr = generic_calibrate_decr,
-};
diff --git a/arch/powerpc/platforms/44x/taishan.c b/arch/powerpc/platforms/44x/taishan.c
deleted file mode 100644
index 49c78b2..0000000
--- a/arch/powerpc/platforms/44x/taishan.c
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * Taishan board specific routines based off ebony.c code
- * original copyrights below
- *
- * Matt Porter <mporter@kernel.crashing.org>
- * Copyright 2002-2005 MontaVista Software Inc.
- *
- * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
- * Copyright (c) 2003-2005 Zultys Technologies
- *
- * Rewritten and ported to the merged powerpc tree:
- * Copyright 2007 David Gibson <dwg@au1.ibm.com>, IBM Corporation.
- *
- * Modified from ebony.c for taishan:
- * Copyright 2007 Hugh Blemings <hugh@au.ibm.com>, IBM Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/init.h>
-#include <linux/of_platform.h>
-
-#include <asm/machdep.h>
-#include <asm/prom.h>
-#include <asm/udbg.h>
-#include <asm/time.h>
-#include <asm/uic.h>
-#include <asm/pci-bridge.h>
-#include <asm/ppc4xx.h>
-
-static __initdata struct of_device_id taishan_of_bus[] = {
- { .compatible = "ibm,plb4", },
- { .compatible = "ibm,opb", },
- { .compatible = "ibm,ebc", },
- {},
-};
-
-static int __init taishan_device_probe(void)
-{
- of_platform_bus_probe(NULL, taishan_of_bus, NULL);
-
- return 0;
-}
-machine_device_initcall(taishan, taishan_device_probe);
-
-/*
- * Called very early, MMU is off, device-tree isn't unflattened
- */
-static int __init taishan_probe(void)
-{
- unsigned long root = of_get_flat_dt_root();
-
- if (!of_flat_dt_is_compatible(root, "amcc,taishan"))
- return 0;
-
- ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC;
-
- return 1;
-}
-
-define_machine(taishan) {
- .name = "Taishan",
- .probe = taishan_probe,
- .progress = udbg_progress,
- .init_IRQ = uic_init_tree,
- .get_irq = uic_get_irq,
- .restart = ppc4xx_reset_system,
- .calibrate_decr = generic_calibrate_decr,
-};
diff --git a/arch/powerpc/platforms/512x/Kconfig b/arch/powerpc/platforms/512x/Kconfig
index c62f893..326852c 100644
--- a/arch/powerpc/platforms/512x/Kconfig
+++ b/arch/powerpc/platforms/512x/Kconfig
@@ -3,6 +3,8 @@
select FSL_SOC
select IPIC
select PPC_CLOCK
+ select PPC_PCI_CHOICE
+ select FSL_PCI if PCI
config PPC_MPC5121
bool
diff --git a/arch/powerpc/platforms/512x/mpc5121_ads.c b/arch/powerpc/platforms/512x/mpc5121_ads.c
index 5ebf693..441abc48 100644
--- a/arch/powerpc/platforms/512x/mpc5121_ads.c
+++ b/arch/powerpc/platforms/512x/mpc5121_ads.c
@@ -22,16 +22,26 @@
#include <asm/prom.h>
#include <asm/time.h>
+#include <sysdev/fsl_pci.h>
+
#include "mpc512x.h"
#include "mpc5121_ads.h"
static void __init mpc5121_ads_setup_arch(void)
{
+#ifdef CONFIG_PCI
+ struct device_node *np;
+#endif
printk(KERN_INFO "MPC5121 ADS board from Freescale Semiconductor\n");
/*
* cpld regs are needed early
*/
mpc5121_ads_cpld_map();
+
+#ifdef CONFIG_PCI
+ for_each_compatible_node(np, "pci", "fsl,mpc5121-pci")
+ mpc83xx_add_bridge(np);
+#endif
}
static void __init mpc5121_ads_init_IRQ(void)
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_common.c b/arch/powerpc/platforms/52xx/mpc52xx_common.c
index 4d5fd1d..044b4e6 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_common.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_common.c
@@ -90,7 +90,7 @@
of_node_put(np);
if (!xlb) {
printk(KERN_ERR __FILE__ ": "
- "Error mapping XLB in mpc52xx_setup_cpu(). "
+ "Error mapping XLB in mpc52xx_setup_cpu(). "
"Expect some abnormal behavior\n");
return;
}
@@ -216,7 +216,8 @@
out_be32(&mpc52xx_wdt->count, 0x000000ff);
out_be32(&mpc52xx_wdt->mode, 0x00009004);
} else
- printk("mpc52xx_restart: Can't access wdt. "
+ printk(KERN_ERR __FILE__ ": "
+ "mpc52xx_restart: Can't access wdt. "
"Restart impossible, system halted.\n");
while (1);
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pci.c b/arch/powerpc/platforms/52xx/mpc52xx_pci.c
index 5a382bb..b49a1852 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_pci.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_pci.c
@@ -265,8 +265,11 @@
/* Memory windows */
res = &hose->mem_resources[0];
if (res->flags) {
- pr_debug("mem_resource[0] = {.start=%x, .end=%x, .flags=%lx}\n",
- res->start, res->end, res->flags);
+ pr_debug("mem_resource[0] = "
+ "{.start=%llx, .end=%llx, .flags=%llx}\n",
+ (unsigned long long)res->start,
+ (unsigned long long)res->end,
+ (unsigned long long)res->flags);
out_be32(&pci_regs->iw0btar,
MPC52xx_PCI_IWBTAR_TRANSLATION(res->start, res->start,
res->end - res->start + 1));
@@ -297,9 +300,11 @@
printk(KERN_ERR "%s: Didn't find IO resources\n", __FILE__);
return;
}
- pr_debug(".io_resource={.start=%x,.end=%x,.flags=%lx} "
+ pr_debug(".io_resource={.start=%llx,.end=%llx,.flags=%llx} "
".io_base_phys=0x%p\n",
- res->start, res->end, res->flags, (void*)hose->io_base_phys);
+ (unsigned long long)res->start,
+ (unsigned long long)res->end,
+ (unsigned long long)res->flags, (void*)hose->io_base_phys);
out_be32(&pci_regs->iw2btar,
MPC52xx_PCI_IWBTAR_TRANSLATION(hose->io_base_phys,
res->start,
diff --git a/arch/powerpc/platforms/82xx/Kconfig b/arch/powerpc/platforms/82xx/Kconfig
index 75eb1ed..30f008b 100644
--- a/arch/powerpc/platforms/82xx/Kconfig
+++ b/arch/powerpc/platforms/82xx/Kconfig
@@ -38,6 +38,14 @@
This board is also resold by Freescale as the QUICCStart
MPC8248 Evaluation System and/or the CWH-PPC-8248N-VE.
+config MGCOGE
+ bool "Keymile MGCOGE"
+ select 8272
+ select 8260
+ select FSL_SOC
+ help
+ This enables support for the Keymile MGCOGE board.
+
endif
config PQ2ADS
diff --git a/arch/powerpc/platforms/82xx/Makefile b/arch/powerpc/platforms/82xx/Makefile
index 6cd5cd5..d982793 100644
--- a/arch/powerpc/platforms/82xx/Makefile
+++ b/arch/powerpc/platforms/82xx/Makefile
@@ -6,3 +6,4 @@
obj-$(CONFIG_PQ2_ADS_PCI_PIC) += pq2ads-pci-pic.o
obj-$(CONFIG_PQ2FADS) += pq2fads.o
obj-$(CONFIG_EP8248E) += ep8248e.o
+obj-$(CONFIG_MGCOGE) += mgcoge.o
diff --git a/arch/powerpc/platforms/82xx/mgcoge.c b/arch/powerpc/platforms/82xx/mgcoge.c
new file mode 100644
index 0000000..c2af169
--- /dev/null
+++ b/arch/powerpc/platforms/82xx/mgcoge.c
@@ -0,0 +1,129 @@
+/*
+ * Keymile mgcoge support
+ * Copyright 2008 DENX Software Engineering GmbH
+ * Author: Heiko Schocher <hs@denx.de>
+ *
+ * based on code from:
+ * Copyright 2007 Freescale Semiconductor, Inc.
+ * Author: Scott Wood <scottwood@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/fsl_devices.h>
+#include <linux/of_platform.h>
+
+#include <asm/io.h>
+#include <asm/cpm2.h>
+#include <asm/udbg.h>
+#include <asm/machdep.h>
+#include <asm/time.h>
+#include <asm/mpc8260.h>
+#include <asm/prom.h>
+
+#include <sysdev/fsl_soc.h>
+#include <sysdev/cpm2_pic.h>
+
+#include "pq2.h"
+
+static void __init mgcoge_pic_init(void)
+{
+ struct device_node *np = of_find_compatible_node(NULL, NULL, "fsl,pq2-pic");
+ if (!np) {
+ printk(KERN_ERR "PIC init: can not find cpm-pic node\n");
+ return;
+ }
+
+ cpm2_pic_init(np);
+ of_node_put(np);
+}
+
+struct cpm_pin {
+ int port, pin, flags;
+};
+
+static __initdata struct cpm_pin mgcoge_pins[] = {
+
+ /* SMC2 */
+ {1, 8, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {1, 9, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+
+ /* SCC4 */
+ {3, 25, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {3, 24, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {3, 9, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {3, 8, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {4, 22, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {4, 21, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+};
+
+static void __init init_ioports(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(mgcoge_pins); i++) {
+ const struct cpm_pin *pin = &mgcoge_pins[i];
+ cpm2_set_pin(pin->port - 1, pin->pin, pin->flags);
+ }
+
+ cpm2_smc_clk_setup(CPM_CLK_SMC2, CPM_BRG8);
+ cpm2_clk_setup(CPM_CLK_SCC4, CPM_CLK7, CPM_CLK_RX);
+ cpm2_clk_setup(CPM_CLK_SCC4, CPM_CLK8, CPM_CLK_TX);
+}
+
+static void __init mgcoge_setup_arch(void)
+{
+ if (ppc_md.progress)
+ ppc_md.progress("mgcoge_setup_arch()", 0);
+
+ cpm2_reset();
+
+ /* When this is set, snooping CPM DMA from RAM causes
+ * machine checks. See erratum SIU18.
+ */
+ clrbits32(&cpm2_immr->im_siu_conf.siu_82xx.sc_bcr, MPC82XX_BCR_PLDP);
+
+ init_ioports();
+
+ if (ppc_md.progress)
+ ppc_md.progress("mgcoge_setup_arch(), finish", 0);
+}
+
+static __initdata struct of_device_id of_bus_ids[] = {
+ { .compatible = "simple-bus", },
+ {},
+};
+
+static int __init declare_of_platform_devices(void)
+{
+ of_platform_bus_probe(NULL, of_bus_ids, NULL);
+
+ return 0;
+}
+machine_device_initcall(mgcoge, declare_of_platform_devices);
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init mgcoge_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+ return of_flat_dt_is_compatible(root, "keymile,mgcoge");
+}
+
+define_machine(mgcoge)
+{
+ .name = "Keymile MGCOGE",
+ .probe = mgcoge_probe,
+ .setup_arch = mgcoge_setup_arch,
+ .init_IRQ = mgcoge_pic_init,
+ .get_irq = cpm2_get_irq,
+ .calibrate_decr = generic_calibrate_decr,
+ .restart = pq2_restart,
+ .progress = udbg_progress,
+};
diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig
index 6159c5d..83c664af 100644
--- a/arch/powerpc/platforms/83xx/Kconfig
+++ b/arch/powerpc/platforms/83xx/Kconfig
@@ -19,7 +19,6 @@
config MPC832x_MDS
bool "Freescale MPC832x MDS"
select DEFAULT_UIMAGE
- select QUICC_ENGINE
select PPC_MPC832x
help
This option enables support for the MPC832x MDS evaluation board.
@@ -27,7 +26,6 @@
config MPC832x_RDB
bool "Freescale MPC832x RDB"
select DEFAULT_UIMAGE
- select QUICC_ENGINE
select PPC_MPC832x
help
This option enables support for the MPC8323 RDB board.
@@ -57,15 +55,12 @@
config MPC836x_MDS
bool "Freescale MPC836x MDS"
select DEFAULT_UIMAGE
- select QUICC_ENGINE
help
This option enables support for the MPC836x MDS Processor Board.
config MPC836x_RDK
bool "Freescale/Logic MPC836x RDK"
select DEFAULT_UIMAGE
- select QUICC_ENGINE
- select QE_GPIO
select FSL_GTM
select FSL_LBC
help
diff --git a/arch/powerpc/platforms/83xx/mpc837x_mds.c b/arch/powerpc/platforms/83xx/mpc837x_mds.c
index be62de2..8bb13c8 100644
--- a/arch/powerpc/platforms/83xx/mpc837x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc837x_mds.c
@@ -85,8 +85,14 @@
ppc_md.progress("mpc837x_mds_setup_arch()", 0);
#ifdef CONFIG_PCI
- for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
+ for_each_compatible_node(np, "pci", "fsl,mpc8349-pci") {
+ if (!of_device_is_available(np)) {
+ pr_warning("%s: disabled by the firmware.\n",
+ np->full_name);
+ continue;
+ }
mpc83xx_add_bridge(np);
+ }
#endif
mpc837xmds_usb_cfg();
}
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index 291675b..b79dc71 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -33,7 +33,6 @@
config MPC85xx_MDS
bool "Freescale MPC85xx MDS"
select DEFAULT_UIMAGE
- select QUICC_ENGINE
select PHYLIB
help
This option enables support for the MPC85xx MDS board
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
index d17807a..0293e3d 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
@@ -213,7 +213,6 @@
svid = mfspr(SPRN_SVR);
seq_printf(m, "Vendor\t\t: Freescale Semiconductor\n");
- seq_printf(m, "Machine\t\t: mpc85xx\n");
seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
seq_printf(m, "SVR\t\t: 0x%x\n", svid);
diff --git a/arch/powerpc/platforms/85xx/sbc8560.c b/arch/powerpc/platforms/85xx/sbc8560.c
index 6509ade..0c9a856 100644
--- a/arch/powerpc/platforms/85xx/sbc8560.c
+++ b/arch/powerpc/platforms/85xx/sbc8560.c
@@ -156,7 +156,7 @@
int i;
for (i = 0; i < ARRAY_SIZE(sbc8560_pins); i++) {
- struct cpm_pin *pin = &sbc8560_pins[i];
+ const struct cpm_pin *pin = &sbc8560_pins[i];
cpm2_set_pin(pin->port, pin->pin, pin->flags);
}
@@ -200,7 +200,6 @@
svid = mfspr(SPRN_SVR);
seq_printf(m, "Vendor\t\t: Wind River\n");
- seq_printf(m, "Machine\t\t: SBC8560\n");
seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
seq_printf(m, "SVR\t\t: 0x%x\n", svid);
diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig
index 9355a52..77dd797 100644
--- a/arch/powerpc/platforms/86xx/Kconfig
+++ b/arch/powerpc/platforms/86xx/Kconfig
@@ -31,6 +31,13 @@
help
This option enables support for the MPC8610 HPCD board.
+config GEF_SBC610
+ bool "GE Fanuc SBC610"
+ select DEFAULT_UIMAGE
+ select HAS_RAPIDIO
+ help
+ This option enables support for GE Fanuc's SBC610.
+
endif
config MPC8641
@@ -39,7 +46,7 @@
select FSL_PCI if PCI
select PPC_UDBG_16550
select MPIC
- default y if MPC8641_HPCN || SBC8641D
+ default y if MPC8641_HPCN || SBC8641D || GEF_SBC610
config MPC8610
bool
diff --git a/arch/powerpc/platforms/86xx/Makefile b/arch/powerpc/platforms/86xx/Makefile
index 8fee37d..4a56ff6 100644
--- a/arch/powerpc/platforms/86xx/Makefile
+++ b/arch/powerpc/platforms/86xx/Makefile
@@ -7,3 +7,4 @@
obj-$(CONFIG_MPC8641_HPCN) += mpc86xx_hpcn.o
obj-$(CONFIG_SBC8641D) += sbc8641d.o
obj-$(CONFIG_MPC8610_HPCD) += mpc8610_hpcd.o
+obj-$(CONFIG_GEF_SBC610) += gef_sbc610.o gef_pic.o
diff --git a/arch/powerpc/platforms/86xx/gef_pic.c b/arch/powerpc/platforms/86xx/gef_pic.c
new file mode 100644
index 0000000..50d0a2b
--- /dev/null
+++ b/arch/powerpc/platforms/86xx/gef_pic.c
@@ -0,0 +1,258 @@
+/*
+ * Interrupt handling for GE Fanuc's FPGA based PIC
+ *
+ * Author: Martyn Welch <martyn.welch@gefanuc.com>
+ *
+ * 2008 (c) GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+
+#include <asm/byteorder.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/irq.h>
+
+#include "gef_pic.h"
+
+#define DEBUG
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(fmt...) do { printk(KERN_DEBUG "gef_pic: " fmt); } while (0)
+#else
+#define DBG(fmt...) do { } while (0)
+#endif
+
+#define GEF_PIC_NUM_IRQS 32
+
+/* Interrupt Controller Interface Registers */
+#define GEF_PIC_INTR_STATUS 0x0000
+
+#define GEF_PIC_INTR_MASK(cpu) (0x0010 + (0x4 * cpu))
+#define GEF_PIC_CPU0_INTR_MASK GEF_PIC_INTR_MASK(0)
+#define GEF_PIC_CPU1_INTR_MASK GEF_PIC_INTR_MASK(1)
+
+#define GEF_PIC_MCP_MASK(cpu) (0x0018 + (0x4 * cpu))
+#define GEF_PIC_CPU0_MCP_MASK GEF_PIC_MCP_MASK(0)
+#define GEF_PIC_CPU1_MCP_MASK GEF_PIC_MCP_MASK(1)
+
+#define gef_irq_to_hw(virq) ((unsigned int)irq_map[virq].hwirq)
+
+
+static DEFINE_SPINLOCK(gef_pic_lock);
+
+static void __iomem *gef_pic_irq_reg_base;
+static struct irq_host *gef_pic_irq_host;
+static int gef_pic_cascade_irq;
+
+/*
+ * Interrupt Controller Handling
+ *
+ * The interrupt controller handles interrupts for most on board interrupts,
+ * apart from PCI interrupts. For example on SBC610:
+ *
+ * 17:31 RO Reserved
+ * 16 RO PCI Express Doorbell 3 Status
+ * 15 RO PCI Express Doorbell 2 Status
+ * 14 RO PCI Express Doorbell 1 Status
+ * 13 RO PCI Express Doorbell 0 Status
+ * 12 RO Real Time Clock Interrupt Status
+ * 11 RO Temperature Interrupt Status
+ * 10 RO Temperature Critical Interrupt Status
+ * 9 RO Ethernet PHY1 Interrupt Status
+ * 8 RO Ethernet PHY3 Interrupt Status
+ * 7 RO PEX8548 Interrupt Status
+ * 6 RO Reserved
+ * 5 RO Watchdog 0 Interrupt Status
+ * 4 RO Watchdog 1 Interrupt Status
+ * 3 RO AXIS Message FIFO A Interrupt Status
+ * 2 RO AXIS Message FIFO B Interrupt Status
+ * 1 RO AXIS Message FIFO C Interrupt Status
+ * 0 RO AXIS Message FIFO D Interrupt Status
+ *
+ * Interrupts can be forwarded to one of two output lines. Nothing
+ * clever is done, so if the masks are incorrectly set, a single input
+ * interrupt could generate interrupts on both output lines!
+ *
+ * The dual lines are there to allow the chained interrupts to be easily
+ * passed into two different cores. We currently do not use this functionality
+ * in this driver.
+ *
+ * Controller can also be configured to generate Machine checks (MCP), again on
+ * two lines, to be attached to two different cores. It is suggested that these
+ * should be masked out.
+ */
+
+void gef_pic_cascade(unsigned int irq, struct irq_desc *desc)
+{
+ unsigned int cascade_irq;
+
+ /*
+ * See if we actually have an interrupt, call generic handling code if
+ * we do.
+ */
+ cascade_irq = gef_pic_get_irq();
+
+ if (cascade_irq != NO_IRQ)
+ generic_handle_irq(cascade_irq);
+
+ desc->chip->eoi(irq);
+
+}
+
+static void gef_pic_mask(unsigned int virq)
+{
+ unsigned long flags;
+ unsigned int hwirq;
+ u32 mask;
+
+ hwirq = gef_irq_to_hw(virq);
+
+ spin_lock_irqsave(&gef_pic_lock, flags);
+ mask = in_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0));
+ mask &= ~(1 << hwirq);
+ out_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0), mask);
+ spin_unlock_irqrestore(&gef_pic_lock, flags);
+}
+
+static void gef_pic_mask_ack(unsigned int virq)
+{
+ /* Don't think we actually have to do anything to ack an interrupt,
+ * we just need to clear down the devices interrupt and it will go away
+ */
+ gef_pic_mask(virq);
+}
+
+static void gef_pic_unmask(unsigned int virq)
+{
+ unsigned long flags;
+ unsigned int hwirq;
+ u32 mask;
+
+ hwirq = gef_irq_to_hw(virq);
+
+ spin_lock_irqsave(&gef_pic_lock, flags);
+ mask = in_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0));
+ mask |= (1 << hwirq);
+ out_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0), mask);
+ spin_unlock_irqrestore(&gef_pic_lock, flags);
+}
+
+static struct irq_chip gef_pic_chip = {
+ .typename = "gefp",
+ .mask = gef_pic_mask,
+ .mask_ack = gef_pic_mask_ack,
+ .unmask = gef_pic_unmask,
+};
+
+
+/* When an interrupt is being configured, this call allows some flexibilty
+ * in deciding which irq_chip structure is used
+ */
+static int gef_pic_host_map(struct irq_host *h, unsigned int virq,
+ irq_hw_number_t hwirq)
+{
+ /* All interrupts are LEVEL sensitive */
+ get_irq_desc(virq)->status |= IRQ_LEVEL;
+ set_irq_chip_and_handler(virq, &gef_pic_chip, handle_level_irq);
+
+ return 0;
+}
+
+static int gef_pic_host_xlate(struct irq_host *h, struct device_node *ct,
+ u32 *intspec, unsigned int intsize,
+ irq_hw_number_t *out_hwirq, unsigned int *out_flags)
+{
+
+ *out_hwirq = intspec[0];
+ if (intsize > 1)
+ *out_flags = intspec[1];
+ else
+ *out_flags = IRQ_TYPE_LEVEL_HIGH;
+
+ return 0;
+}
+
+static struct irq_host_ops gef_pic_host_ops = {
+ .map = gef_pic_host_map,
+ .xlate = gef_pic_host_xlate,
+};
+
+
+/*
+ * Initialisation of PIC, this should be called in BSP
+ */
+void __init gef_pic_init(struct device_node *np)
+{
+ unsigned long flags;
+
+ /* Map the devices registers into memory */
+ gef_pic_irq_reg_base = of_iomap(np, 0);
+
+ spin_lock_irqsave(&gef_pic_lock, flags);
+
+ /* Initialise everything as masked. */
+ out_be32(gef_pic_irq_reg_base + GEF_PIC_CPU0_INTR_MASK, 0);
+ out_be32(gef_pic_irq_reg_base + GEF_PIC_CPU1_INTR_MASK, 0);
+
+ out_be32(gef_pic_irq_reg_base + GEF_PIC_CPU0_MCP_MASK, 0);
+ out_be32(gef_pic_irq_reg_base + GEF_PIC_CPU1_MCP_MASK, 0);
+
+ spin_unlock_irqrestore(&gef_pic_lock, flags);
+
+ /* Map controller */
+ gef_pic_cascade_irq = irq_of_parse_and_map(np, 0);
+ if (gef_pic_cascade_irq == NO_IRQ) {
+ printk(KERN_ERR "SBC610: failed to map cascade interrupt");
+ return;
+ }
+
+ /* Setup an irq_host structure */
+ gef_pic_irq_host = irq_alloc_host(np, IRQ_HOST_MAP_LINEAR,
+ GEF_PIC_NUM_IRQS,
+ &gef_pic_host_ops, NO_IRQ);
+ if (gef_pic_irq_host == NULL)
+ return;
+
+ /* Chain with parent controller */
+ set_irq_chained_handler(gef_pic_cascade_irq, gef_pic_cascade);
+}
+
+/*
+ * This is called when we receive an interrupt with apparently comes from this
+ * chip - check, returning the highest interrupt generated or return NO_IRQ
+ */
+unsigned int gef_pic_get_irq(void)
+{
+ u32 cause, mask, active;
+ unsigned int virq = NO_IRQ;
+ int hwirq;
+
+ cause = in_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_STATUS);
+
+ mask = in_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0));
+
+ active = cause & mask;
+
+ if (active) {
+ for (hwirq = GEF_PIC_NUM_IRQS - 1; hwirq > -1; hwirq--) {
+ if (active & (0x1 << hwirq))
+ break;
+ }
+ virq = irq_linear_revmap(gef_pic_irq_host,
+ (irq_hw_number_t)hwirq);
+ }
+
+ return virq;
+}
+
diff --git a/arch/powerpc/platforms/86xx/gef_pic.h b/arch/powerpc/platforms/86xx/gef_pic.h
new file mode 100644
index 0000000..6149916
--- /dev/null
+++ b/arch/powerpc/platforms/86xx/gef_pic.h
@@ -0,0 +1,11 @@
+#ifndef __GEF_PIC_H__
+#define __GEF_PIC_H__
+
+#include <linux/init.h>
+
+void gef_pic_cascade(unsigned int, struct irq_desc *);
+unsigned int gef_pic_get_irq(void);
+void gef_pic_init(struct device_node *);
+
+#endif /* __GEF_PIC_H__ */
+
diff --git a/arch/powerpc/platforms/86xx/gef_sbc610.c b/arch/powerpc/platforms/86xx/gef_sbc610.c
new file mode 100644
index 0000000..821c45f
--- /dev/null
+++ b/arch/powerpc/platforms/86xx/gef_sbc610.c
@@ -0,0 +1,221 @@
+/*
+ * GE Fanuc SBC610 board support
+ *
+ * Author: Martyn Welch <martyn.welch@gefanuc.com>
+ *
+ * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * Based on: mpc86xx_hpcn.c (MPC86xx HPCN board specific routines)
+ * Copyright 2006 Freescale Semiconductor Inc.
+ *
+ * NEC fixup adapted from arch/mips/pci/fixup-lm2e.c
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/of_platform.h>
+
+#include <asm/system.h>
+#include <asm/time.h>
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <asm/mpc86xx.h>
+#include <asm/prom.h>
+#include <mm/mmu_decl.h>
+#include <asm/udbg.h>
+
+#include <asm/mpic.h>
+
+#include <sysdev/fsl_pci.h>
+#include <sysdev/fsl_soc.h>
+
+#include "mpc86xx.h"
+#include "gef_pic.h"
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG (fmt...) do { printk(KERN_ERR "SBC610: " fmt); } while (0)
+#else
+#define DBG (fmt...) do { } while (0)
+#endif
+
+void __iomem *sbc610_regs;
+
+static void __init gef_sbc610_init_irq(void)
+{
+ struct device_node *cascade_node = NULL;
+
+ mpc86xx_init_irq();
+
+ /*
+ * There is a simple interrupt handler in the main FPGA, this needs
+ * to be cascaded into the MPIC
+ */
+ cascade_node = of_find_compatible_node(NULL, NULL, "gef,fpga-pic");
+ if (!cascade_node) {
+ printk(KERN_WARNING "SBC610: No FPGA PIC\n");
+ return;
+ }
+
+ gef_pic_init(cascade_node);
+ of_node_put(cascade_node);
+}
+
+static void __init gef_sbc610_setup_arch(void)
+{
+ struct device_node *regs;
+#ifdef CONFIG_PCI
+ struct device_node *np;
+
+ for_each_compatible_node(np, "pci", "fsl,mpc8641-pcie") {
+ fsl_add_bridge(np, 1);
+ }
+#endif
+
+ printk(KERN_INFO "GE Fanuc Intelligent Platforms SBC610 6U VPX SBC\n");
+
+#ifdef CONFIG_SMP
+ mpc86xx_smp_init();
+#endif
+
+ /* Remap basic board registers */
+ regs = of_find_compatible_node(NULL, NULL, "gef,fpga-regs");
+ if (regs) {
+ sbc610_regs = of_iomap(regs, 0);
+ if (sbc610_regs == NULL)
+ printk(KERN_WARNING "Unable to map board registers\n");
+ of_node_put(regs);
+ }
+}
+
+/* Return the PCB revision */
+static unsigned int gef_sbc610_get_pcb_rev(void)
+{
+ unsigned int reg;
+
+ reg = ioread32(sbc610_regs);
+ return (reg >> 8) & 0xff;
+}
+
+/* Return the board (software) revision */
+static unsigned int gef_sbc610_get_board_rev(void)
+{
+ unsigned int reg;
+
+ reg = ioread32(sbc610_regs);
+ return (reg >> 16) & 0xff;
+}
+
+/* Return the FPGA revision */
+static unsigned int gef_sbc610_get_fpga_rev(void)
+{
+ unsigned int reg;
+
+ reg = ioread32(sbc610_regs);
+ return (reg >> 24) & 0xf;
+}
+
+static void gef_sbc610_show_cpuinfo(struct seq_file *m)
+{
+ uint memsize = total_memory;
+ uint svid = mfspr(SPRN_SVR);
+
+ seq_printf(m, "Vendor\t\t: GE Fanuc Intelligent Platforms\n");
+
+ seq_printf(m, "Revision\t: %u%c\n", gef_sbc610_get_pcb_rev(),
+ ('A' + gef_sbc610_get_board_rev() - 1));
+ seq_printf(m, "FPGA Revision\t: %u\n", gef_sbc610_get_fpga_rev());
+
+ seq_printf(m, "SVR\t\t: 0x%x\n", svid);
+ seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
+}
+
+static void __init gef_sbc610_nec_fixup(struct pci_dev *pdev)
+{
+ unsigned int val;
+
+ printk(KERN_INFO "Running NEC uPD720101 Fixup\n");
+
+ /* Ensure ports 1, 2, 3, 4 & 5 are enabled */
+ pci_read_config_dword(pdev, 0xe0, &val);
+ pci_write_config_dword(pdev, 0xe0, (val & ~7) | 0x5);
+
+ /* System clock is 48-MHz Oscillator and EHCI Enabled. */
+ pci_write_config_dword(pdev, 0xe4, 1 << 5);
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB,
+ gef_sbc610_nec_fixup);
+
+/*
+ * Called very early, device-tree isn't unflattened
+ *
+ * This function is called to determine whether the BSP is compatible with the
+ * supplied device-tree, which is assumed to be the correct one for the actual
+ * board. It is expected thati, in the future, a kernel may support multiple
+ * boards.
+ */
+static int __init gef_sbc610_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ if (of_flat_dt_is_compatible(root, "gef,sbc610"))
+ return 1;
+
+ return 0;
+}
+
+static long __init mpc86xx_time_init(void)
+{
+ unsigned int temp;
+
+ /* Set the time base to zero */
+ mtspr(SPRN_TBWL, 0);
+ mtspr(SPRN_TBWU, 0);
+
+ temp = mfspr(SPRN_HID0);
+ temp |= HID0_TBEN;
+ mtspr(SPRN_HID0, temp);
+ asm volatile("isync");
+
+ return 0;
+}
+
+static __initdata struct of_device_id of_bus_ids[] = {
+ { .compatible = "simple-bus", },
+ {},
+};
+
+static int __init declare_of_platform_devices(void)
+{
+ printk(KERN_DEBUG "Probe platform devices\n");
+ of_platform_bus_probe(NULL, of_bus_ids, NULL);
+
+ return 0;
+}
+machine_device_initcall(gef_sbc610, declare_of_platform_devices);
+
+define_machine(gef_sbc610) {
+ .name = "GE Fanuc SBC610",
+ .probe = gef_sbc610_probe,
+ .setup_arch = gef_sbc610_setup_arch,
+ .init_IRQ = gef_sbc610_init_irq,
+ .show_cpuinfo = gef_sbc610_show_cpuinfo,
+ .get_irq = mpic_get_irq,
+ .restart = fsl_rstcr_restart,
+ .time_init = mpc86xx_time_init,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+#ifdef CONFIG_PCI
+ .pcibios_fixup_bus = fsl_pcibios_fixup_bus,
+#endif
+};
diff --git a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
index 5eedb71..e8d54ac 100644
--- a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
+++ b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
@@ -238,7 +238,6 @@
}
#endif
#if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
- preallocate_diu_videomemory();
diu_ops.get_pixel_format = mpc8610hpcd_get_pixel_format;
diu_ops.set_gamma_table = mpc8610hpcd_set_gamma_table;
diu_ops.set_monitor_port = mpc8610hpcd_set_monitor_port;
diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
index f712d9c..2672829 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
+++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
@@ -101,19 +101,11 @@
static void
mpc86xx_hpcn_show_cpuinfo(struct seq_file *m)
{
- struct device_node *root;
uint memsize = total_memory;
- const char *model = "";
uint svid = mfspr(SPRN_SVR);
seq_printf(m, "Vendor\t\t: Freescale Semiconductor\n");
- root = of_find_node_by_path("/");
- if (root)
- model = of_get_property(root, "model", NULL);
- seq_printf(m, "Machine\t\t: %s\n", model);
- of_node_put(root);
-
seq_printf(m, "SVR\t\t: 0x%x\n", svid);
seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
}
diff --git a/arch/powerpc/platforms/86xx/sbc8641d.c b/arch/powerpc/platforms/86xx/sbc8641d.c
index 00e6fad..da677a7 100644
--- a/arch/powerpc/platforms/86xx/sbc8641d.c
+++ b/arch/powerpc/platforms/86xx/sbc8641d.c
@@ -63,19 +63,11 @@
static void
sbc8641_show_cpuinfo(struct seq_file *m)
{
- struct device_node *root;
uint memsize = total_memory;
- const char *model = "";
uint svid = mfspr(SPRN_SVR);
seq_printf(m, "Vendor\t\t: Wind River Systems\n");
- root = of_find_node_by_path("/");
- if (root)
- model = of_get_property(root, "model", NULL);
- seq_printf(m, "Machine\t\t: %s\n", model);
- of_node_put(root);
-
seq_printf(m, "SVR\t\t: 0x%x\n", svid);
seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
}
diff --git a/arch/powerpc/platforms/8xx/Kconfig b/arch/powerpc/platforms/8xx/Kconfig
index 71d7562..48a920a 100644
--- a/arch/powerpc/platforms/8xx/Kconfig
+++ b/arch/powerpc/platforms/8xx/Kconfig
@@ -49,6 +49,12 @@
This enables support for the Analogue & Micro Adder 875
board.
+config PPC_MGSUVD
+ bool "MGSUVD"
+ select CPM1
+ help
+ This enables support for the Keymile MGSUVD board.
+
endchoice
menu "Freescale Ethernet driver platform-specific options"
diff --git a/arch/powerpc/platforms/8xx/Makefile b/arch/powerpc/platforms/8xx/Makefile
index 7b71d9c..bdbfd749 100644
--- a/arch/powerpc/platforms/8xx/Makefile
+++ b/arch/powerpc/platforms/8xx/Makefile
@@ -6,3 +6,4 @@
obj-$(CONFIG_MPC86XADS) += mpc86xads_setup.o
obj-$(CONFIG_PPC_EP88XC) += ep88xc.o
obj-$(CONFIG_PPC_ADDER875) += adder875.o
+obj-$(CONFIG_PPC_MGSUVD) += mgsuvd.o
diff --git a/arch/powerpc/platforms/8xx/mgsuvd.c b/arch/powerpc/platforms/8xx/mgsuvd.c
new file mode 100644
index 0000000..ca3cb07
--- /dev/null
+++ b/arch/powerpc/platforms/8xx/mgsuvd.c
@@ -0,0 +1,92 @@
+/*
+ *
+ * Platform setup for the Keymile mgsuvd board
+ *
+ * Heiko Schocher <hs@denx.de>
+ *
+ * Copyright 2008 DENX Software Engineering GmbH
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/ioport.h>
+#include <linux/of_platform.h>
+
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/processor.h>
+#include <asm/cpm1.h>
+#include <asm/prom.h>
+#include <asm/fs_pd.h>
+
+#include "mpc8xx.h"
+
+struct cpm_pin {
+ int port, pin, flags;
+};
+
+static __initdata struct cpm_pin mgsuvd_pins[] = {
+ /* SMC1 */
+ {CPM_PORTB, 24, CPM_PIN_INPUT}, /* RX */
+ {CPM_PORTB, 25, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TX */
+
+ /* SCC3 */
+ {CPM_PORTA, 10, CPM_PIN_INPUT},
+ {CPM_PORTA, 11, CPM_PIN_INPUT},
+ {CPM_PORTA, 3, CPM_PIN_INPUT},
+ {CPM_PORTA, 2, CPM_PIN_INPUT},
+ {CPM_PORTC, 13, CPM_PIN_INPUT},
+};
+
+static void __init init_ioports(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(mgsuvd_pins); i++) {
+ struct cpm_pin *pin = &mgsuvd_pins[i];
+ cpm1_set_pin(pin->port, pin->pin, pin->flags);
+ }
+
+ setbits16(&mpc8xx_immr->im_ioport.iop_pcso, 0x300);
+ cpm1_clk_setup(CPM_CLK_SCC3, CPM_CLK5, CPM_CLK_RX);
+ cpm1_clk_setup(CPM_CLK_SCC3, CPM_CLK6, CPM_CLK_TX);
+ cpm1_clk_setup(CPM_CLK_SMC1, CPM_BRG1, CPM_CLK_RTX);
+}
+
+static void __init mgsuvd_setup_arch(void)
+{
+ cpm_reset();
+ init_ioports();
+}
+
+static __initdata struct of_device_id of_bus_ids[] = {
+ { .compatible = "simple-bus" },
+ {},
+};
+
+static int __init declare_of_platform_devices(void)
+{
+ of_platform_bus_probe(NULL, of_bus_ids, NULL);
+ return 0;
+}
+machine_device_initcall(mgsuvd, declare_of_platform_devices);
+
+static int __init mgsuvd_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+ return of_flat_dt_is_compatible(root, "keymile,mgsuvd");
+}
+
+define_machine(mgsuvd) {
+ .name = "MGSUVD",
+ .probe = mgsuvd_probe,
+ .setup_arch = mgsuvd_setup_arch,
+ .init_IRQ = mpc8xx_pics_init,
+ .get_irq = mpc8xx_get_irq,
+ .restart = mpc8xx_restart,
+ .calibrate_decr = mpc8xx_calibrate_decr,
+ .set_rtc_time = mpc8xx_set_rtc_time,
+ .get_rtc_time = mpc8xx_get_rtc_time,
+};
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index 4c900ef..47e956c 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -239,7 +239,8 @@
If in doubt, say N here.
config QUICC_ENGINE
- bool
+ bool "Freescale QUICC Engine (QE) Support"
+ depends on FSL_SOC
select PPC_LIB_RHEAP
select CRC32
help
@@ -248,6 +249,15 @@
Selecting this option means that you wish to build a kernel
for a machine with a QE coprocessor.
+config QE_GPIO
+ bool "QE GPIO support"
+ depends on QUICC_ENGINE
+ select GENERIC_GPIO
+ select ARCH_REQUIRE_GPIOLIB
+ help
+ Say Y here if you're going to use hardware that connects to the
+ QE GPIOs.
+
config CPM2
bool "Enable support for the CPM2 (Communications Processor Module)"
depends on MPC85xx || 8260
@@ -293,4 +303,13 @@
source "arch/powerpc/sysdev/bestcomm/Kconfig"
+config MPC8xxx_GPIO
+ bool "MPC8xxx GPIO support"
+ depends on PPC_MPC831x || PPC_MPC834x || PPC_MPC837x || PPC_85xx || PPC_86xx
+ select GENERIC_GPIO
+ select ARCH_REQUIRE_GPIOLIB
+ help
+ Say Y here if you're going to use hardware that connects to the
+ MPC831x/834x/837x/8572/8610 GPIOs.
+
endmenu
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index 7f65127..439c5ba 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -50,6 +50,7 @@
select PPC_UDBG_16550
select 4xx_SOC
select PPC_PCI_CHOICE
+ select PHYS_64BIT
config E200
bool "Freescale e200"
@@ -128,18 +129,20 @@
config PTE_64BIT
bool
- depends on 44x || E500
- default y if 44x
- default y if E500 && PHYS_64BIT
+ depends on 44x || E500 || PPC_86xx
+ default y if PHYS_64BIT
config PHYS_64BIT
- bool 'Large physical address support' if E500
- depends on 44x || E500
+ bool 'Large physical address support' if E500 || PPC_86xx
+ depends on (44x || E500 || PPC_86xx) && !PPC_83xx && !PPC_82xx
select RESOURCES_64BIT
- default y if 44x
---help---
This option enables kernel support for larger than 32-bit physical
- addresses. This features is not be available on all e500 cores.
+ addresses. This feature may not be available on all cores.
+
+ If you have more than 3.5GB of RAM or so, you also need to enable
+ SWIOTLB under Kernel Options for this to work. The actual number
+ is platform-dependent.
If in doubt, say N here.
diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c
index e06420a..ef92e71 100644
--- a/arch/powerpc/platforms/cell/iommu.c
+++ b/arch/powerpc/platforms/cell/iommu.c
@@ -556,11 +556,11 @@
* node's iommu. We -might- do something smarter later though it may
* never be necessary
*/
- iommu = cell_iommu_for_node(archdata->numa_node);
+ iommu = cell_iommu_for_node(dev_to_node(dev));
if (iommu == NULL || list_empty(&iommu->windows)) {
printk(KERN_ERR "iommu: missing iommu for %s (node %d)\n",
archdata->of_node ? archdata->of_node->full_name : "?",
- archdata->numa_node);
+ dev_to_node(dev));
return NULL;
}
window = list_entry(iommu->windows.next, struct iommu_window, list);
@@ -577,7 +577,7 @@
return iommu_alloc_coherent(dev, cell_get_iommu_table(dev),
size, dma_handle,
device_to_mask(dev), flag,
- dev->archdata.numa_node);
+ dev_to_node(dev));
else
return dma_direct_ops.alloc_coherent(dev, size, dma_handle,
flag);
diff --git a/arch/powerpc/platforms/cell/spufs/inode.c b/arch/powerpc/platforms/cell/spufs/inode.c
index 2c8b809..cb85d23 100644
--- a/arch/powerpc/platforms/cell/spufs/inode.c
+++ b/arch/powerpc/platforms/cell/spufs/inode.c
@@ -298,8 +298,8 @@
d_instantiate(dentry, inode);
dget(dentry);
- dir->i_nlink++;
- dentry->d_inode->i_nlink++;
+ inc_nlink(dir);
+ inc_nlink(dentry->d_inode);
goto out;
out_free_ctx:
@@ -496,6 +496,8 @@
ret = spufs_context_open(dget(dentry), mntget(mnt));
if (ret < 0) {
WARN_ON(spufs_rmdir(inode, dentry));
+ if (affinity)
+ mutex_unlock(&gang->aff_mutex);
mutex_unlock(&inode->i_mutex);
spu_forget(SPUFS_I(dentry->d_inode)->i_ctx);
goto out;
@@ -538,8 +540,8 @@
inode->i_fop = &simple_dir_operations;
d_instantiate(dentry, inode);
- dir->i_nlink++;
- dentry->d_inode->i_nlink++;
+ inc_nlink(dir);
+ inc_nlink(dentry->d_inode);
return ret;
out_iput:
@@ -755,6 +757,7 @@
inode->i_op = &simple_dir_inode_operations;
inode->i_fop = &simple_dir_operations;
SPUFS_I(inode)->i_ctx = NULL;
+ inc_nlink(inode);
ret = -EINVAL;
if (!spufs_parse_options(sb, data, inode))
diff --git a/arch/powerpc/platforms/chrp/pci.c b/arch/powerpc/platforms/chrp/pci.c
index 768c262..d3cde6b 100644
--- a/arch/powerpc/platforms/chrp/pci.c
+++ b/arch/powerpc/platforms/chrp/pci.c
@@ -260,13 +260,13 @@
dev->full_name);
continue;
}
- hose->first_busno = bus_range[0];
+ hose->first_busno = hose->self_busno = bus_range[0];
hose->last_busno = bus_range[1];
model = of_get_property(dev, "model", NULL);
if (model == NULL)
model = "<none>";
- if (of_device_is_compatible(dev, "IBM,python")) {
+ if (strncmp(model, "IBM, Python", 11) == 0) {
setup_python(hose, dev);
} else if (is_mot
|| strncmp(model, "Motorola, Grackle", 17) == 0) {
diff --git a/arch/powerpc/platforms/chrp/time.c b/arch/powerpc/platforms/chrp/time.c
index 96d1e4b..054dfe5 100644
--- a/arch/powerpc/platforms/chrp/time.c
+++ b/arch/powerpc/platforms/chrp/time.c
@@ -94,12 +94,12 @@
chrp_cmos_clock_write((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT);
if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
- BIN_TO_BCD(tm.tm_sec);
- BIN_TO_BCD(tm.tm_min);
- BIN_TO_BCD(tm.tm_hour);
- BIN_TO_BCD(tm.tm_mon);
- BIN_TO_BCD(tm.tm_mday);
- BIN_TO_BCD(tm.tm_year);
+ tm.tm_sec = bin2bcd(tm.tm_sec);
+ tm.tm_min = bin2bcd(tm.tm_min);
+ tm.tm_hour = bin2bcd(tm.tm_hour);
+ tm.tm_mon = bin2bcd(tm.tm_mon);
+ tm.tm_mday = bin2bcd(tm.tm_mday);
+ tm.tm_year = bin2bcd(tm.tm_year);
}
chrp_cmos_clock_write(tm.tm_sec,RTC_SECONDS);
chrp_cmos_clock_write(tm.tm_min,RTC_MINUTES);
@@ -136,12 +136,12 @@
} while (sec != chrp_cmos_clock_read(RTC_SECONDS));
if (!(chrp_cmos_clock_read(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
- BCD_TO_BIN(sec);
- BCD_TO_BIN(min);
- BCD_TO_BIN(hour);
- BCD_TO_BIN(day);
- BCD_TO_BIN(mon);
- BCD_TO_BIN(year);
+ sec = bcd2bin(sec);
+ min = bcd2bin(min);
+ hour = bcd2bin(hour);
+ day = bcd2bin(day);
+ mon = bcd2bin(mon);
+ year = bcd2bin(year);
}
if (year < 70)
year += 100;
diff --git a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
index 84e2d78..7a2ba39 100644
--- a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
+++ b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
@@ -164,7 +164,6 @@
void mpc7448_hpc2_show_cpuinfo(struct seq_file *m)
{
seq_printf(m, "vendor\t\t: Freescale Semiconductor\n");
- seq_printf(m, "machine\t\t: MPC7448hpc2\n");
}
void mpc7448_hpc2_restart(char *cmd)
diff --git a/arch/powerpc/platforms/iseries/exception.S b/arch/powerpc/platforms/iseries/exception.S
index 8ff330d..2f58152 100644
--- a/arch/powerpc/platforms/iseries/exception.S
+++ b/arch/powerpc/platforms/iseries/exception.S
@@ -38,12 +38,13 @@
.globl system_reset_iSeries
system_reset_iSeries:
+ bl .relative_toc
mfspr r13,SPRN_SPRG3 /* Get alpaca address */
- LOAD_REG_IMMEDIATE(r23, alpaca)
+ LOAD_REG_ADDR(r23, alpaca)
li r0,ALPACA_SIZE
sub r23,r13,r23
divdu r23,r23,r0 /* r23 has cpu number */
- LOAD_REG_IMMEDIATE(r13, paca)
+ LOAD_REG_ADDR(r13, paca)
mulli r0,r23,PACA_SIZE
add r13,r13,r0
mtspr SPRN_SPRG3,r13 /* Save it away for the future */
@@ -60,14 +61,14 @@
mtspr SPRN_CTRLT,r4
/* Spin on __secondary_hold_spinloop until it is updated by the boot cpu. */
-/* In the UP case we'll yeild() later, and we will not access the paca anyway */
+/* In the UP case we'll yield() later, and we will not access the paca anyway */
#ifdef CONFIG_SMP
1:
HMT_LOW
- LOAD_REG_IMMEDIATE(r23, __secondary_hold_spinloop)
+ LOAD_REG_ADDR(r23, __secondary_hold_spinloop)
ld r23,0(r23)
sync
- LOAD_REG_IMMEDIATE(r3,current_set)
+ LOAD_REG_ADDR(r3,current_set)
sldi r28,r24,3 /* get current_set[cpu#] */
ldx r3,r3,r28
addi r1,r3,THREAD_SIZE
@@ -90,7 +91,7 @@
lbz r23,PACAPROCSTART(r13) /* Test if this processor
* should start */
sync
- LOAD_REG_IMMEDIATE(r3,current_set)
+ LOAD_REG_ADDR(r3,current_set)
sldi r28,r24,3 /* get current_set[cpu#] */
ldx r3,r3,r28
addi r1,r3,THREAD_SIZE
@@ -255,8 +256,8 @@
_INIT_STATIC(__start_initialization_iSeries)
/* Clear out the BSS */
- LOAD_REG_IMMEDIATE(r11,__bss_stop)
- LOAD_REG_IMMEDIATE(r8,__bss_start)
+ LOAD_REG_ADDR(r11,__bss_stop)
+ LOAD_REG_ADDR(r8,__bss_start)
sub r11,r11,r8 /* bss size */
addi r11,r11,7 /* round up to an even double word */
rldicl. r11,r11,61,3 /* shift right by 3 */
@@ -267,15 +268,11 @@
3: stdu r0,8(r8)
bdnz 3b
4:
- LOAD_REG_IMMEDIATE(r1,init_thread_union)
+ LOAD_REG_ADDR(r1,init_thread_union)
addi r1,r1,THREAD_SIZE
li r0,0
stdu r0,-STACK_FRAME_OVERHEAD(r1)
- LOAD_REG_IMMEDIATE(r2,__toc_start)
- addi r2,r2,0x4000
- addi r2,r2,0x4000
-
bl .iSeries_early_setup
bl .early_setup
diff --git a/arch/powerpc/platforms/iseries/mf.c b/arch/powerpc/platforms/iseries/mf.c
index 731d7b1..3689c24 100644
--- a/arch/powerpc/platforms/iseries/mf.c
+++ b/arch/powerpc/platforms/iseries/mf.c
@@ -722,13 +722,13 @@
day = tm->tm_mday;
mon = tm->tm_mon + 1;
- BIN_TO_BCD(sec);
- BIN_TO_BCD(min);
- BIN_TO_BCD(hour);
- BIN_TO_BCD(mon);
- BIN_TO_BCD(day);
- BIN_TO_BCD(y1);
- BIN_TO_BCD(y2);
+ sec = bin2bcd(sec);
+ min = bin2bcd(min);
+ hour = bin2bcd(hour);
+ mon = bin2bcd(mon);
+ day = bin2bcd(day);
+ y1 = bin2bcd(y1);
+ y2 = bin2bcd(y2);
memset(ce_time, 0, sizeof(ce_time));
ce_time[3] = 0x41;
@@ -777,12 +777,12 @@
u8 day = ce_msg[10];
u8 mon = ce_msg[11];
- BCD_TO_BIN(sec);
- BCD_TO_BIN(min);
- BCD_TO_BIN(hour);
- BCD_TO_BIN(day);
- BCD_TO_BIN(mon);
- BCD_TO_BIN(year);
+ sec = bcd2bin(sec);
+ min = bcd2bin(min);
+ hour = bcd2bin(hour);
+ day = bcd2bin(day);
+ mon = bcd2bin(mon);
+ year = bcd2bin(year);
if (year <= 69)
year += 100;
diff --git a/arch/powerpc/platforms/maple/time.c b/arch/powerpc/platforms/maple/time.c
index 53bca13..eac569d 100644
--- a/arch/powerpc/platforms/maple/time.c
+++ b/arch/powerpc/platforms/maple/time.c
@@ -68,12 +68,12 @@
if (!(maple_clock_read(RTC_CONTROL) & RTC_DM_BINARY)
|| RTC_ALWAYS_BCD) {
- BCD_TO_BIN(tm->tm_sec);
- BCD_TO_BIN(tm->tm_min);
- BCD_TO_BIN(tm->tm_hour);
- BCD_TO_BIN(tm->tm_mday);
- BCD_TO_BIN(tm->tm_mon);
- BCD_TO_BIN(tm->tm_year);
+ tm->tm_sec = bcd2bin(tm->tm_sec);
+ tm->tm_min = bcd2bin(tm->tm_min);
+ tm->tm_hour = bcd2bin(tm->tm_hour);
+ tm->tm_mday = bcd2bin(tm->tm_mday);
+ tm->tm_mon = bcd2bin(tm->tm_mon);
+ tm->tm_year = bcd2bin(tm->tm_year);
}
if ((tm->tm_year + 1900) < 1970)
tm->tm_year += 100;
@@ -104,12 +104,12 @@
year = tm->tm_year;
if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
- BIN_TO_BCD(sec);
- BIN_TO_BCD(min);
- BIN_TO_BCD(hour);
- BIN_TO_BCD(mon);
- BIN_TO_BCD(mday);
- BIN_TO_BCD(year);
+ sec = bin2bcd(sec);
+ min = bin2bcd(min);
+ hour = bin2bcd(hour);
+ mon = bin2bcd(mon);
+ mday = bin2bcd(mday);
+ year = bin2bcd(year);
}
maple_clock_write(sec, RTC_SECONDS);
maple_clock_write(min, RTC_MINUTES);
diff --git a/arch/powerpc/platforms/powermac/feature.c b/arch/powerpc/platforms/powermac/feature.c
index 5169ecc..e6c0040 100644
--- a/arch/powerpc/platforms/powermac/feature.c
+++ b/arch/powerpc/platforms/powermac/feature.c
@@ -2677,7 +2677,7 @@
macio_chips[i].of_node = node;
macio_chips[i].type = type;
macio_chips[i].base = base;
- macio_chips[i].flags = MACIO_FLAG_SCCB_ON | MACIO_FLAG_SCCB_ON;
+ macio_chips[i].flags = MACIO_FLAG_SCCA_ON | MACIO_FLAG_SCCB_ON;
macio_chips[i].name = macio_names[type];
revp = of_get_property(node, "revision-id", NULL);
if (revp)
diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c
index 4ae3d00..40f72c2a 100644
--- a/arch/powerpc/platforms/powermac/smp.c
+++ b/arch/powerpc/platforms/powermac/smp.c
@@ -787,7 +787,7 @@
{
unsigned int save_vector;
unsigned long target, flags;
- unsigned int *vector = (unsigned int *)(KERNELBASE+0x100);
+ unsigned int *vector = (unsigned int *)(PAGE_OFFSET+0x100);
if (nr < 0 || nr > 3)
return;
@@ -801,7 +801,7 @@
save_vector = *vector;
/* Setup fake reset vector that does
- * b __secondary_start_pmac_0 + nr*8 - KERNELBASE
+ * b __secondary_start_pmac_0 + nr*8
*/
target = (unsigned long) __secondary_start_pmac_0 + nr * 8;
patch_branch(vector, target, BRANCH_SET_LINK);
diff --git a/arch/powerpc/platforms/powermac/time.c b/arch/powerpc/platforms/powermac/time.c
index bbbefd6..59eb840 100644
--- a/arch/powerpc/platforms/powermac/time.c
+++ b/arch/powerpc/platforms/powermac/time.c
@@ -93,11 +93,14 @@
}
#endif
+#if defined(CONFIG_ADB_CUDA) || defined(CONFIG_ADB_PMU) || \
+ defined(CONFIG_PMAC_SMU)
static unsigned long from_rtc_time(struct rtc_time *tm)
{
return mktime(tm->tm_year+1900, tm->tm_mon+1, tm->tm_mday,
tm->tm_hour, tm->tm_min, tm->tm_sec);
}
+#endif
#ifdef CONFIG_ADB_CUDA
static unsigned long cuda_get_time(void)
diff --git a/arch/powerpc/platforms/ps3/system-bus.c b/arch/powerpc/platforms/ps3/system-bus.c
index 280ee88..a789bf58c 100644
--- a/arch/powerpc/platforms/ps3/system-bus.c
+++ b/arch/powerpc/platforms/ps3/system-bus.c
@@ -762,7 +762,7 @@
};
dev->core.archdata.of_node = NULL;
- dev->core.archdata.numa_node = 0;
+ set_dev_node(&dev->core, 0);
pr_debug("%s:%d add %s\n", __func__, __LINE__, dev->core.bus_id);
diff --git a/arch/powerpc/platforms/pseries/cmm.c b/arch/powerpc/platforms/pseries/cmm.c
index 38fe32a..5cd4d27 100644
--- a/arch/powerpc/platforms/pseries/cmm.c
+++ b/arch/powerpc/platforms/pseries/cmm.c
@@ -121,7 +121,7 @@
npa = (struct cmm_page_array *)__get_free_page(GFP_NOIO | __GFP_NOWARN |
__GFP_NORETRY | __GFP_NOMEMALLOC);
if (!npa) {
- pr_info("%s: Can not allocate new page list\n", __FUNCTION__);
+ pr_info("%s: Can not allocate new page list\n", __func__);
free_page(addr);
break;
}
@@ -138,7 +138,7 @@
}
if ((rc = plpar_page_set_loaned(__pa(addr)))) {
- pr_err("%s: Can not set page to loaned. rc=%ld\n", __FUNCTION__, rc);
+ pr_err("%s: Can not set page to loaned. rc=%ld\n", __func__, rc);
spin_unlock(&cmm_lock);
free_page(addr);
break;
diff --git a/arch/powerpc/platforms/pseries/eeh_driver.c b/arch/powerpc/platforms/pseries/eeh_driver.c
index 8c1ca47..0ad56ff 100644
--- a/arch/powerpc/platforms/pseries/eeh_driver.c
+++ b/arch/powerpc/platforms/pseries/eeh_driver.c
@@ -41,7 +41,7 @@
return "";
}
-#ifdef DEBUG
+#if 0
static void print_device_node_tree(struct pci_dn *pdn, int dent)
{
int i;
diff --git a/arch/powerpc/platforms/pseries/hotplug-memory.c b/arch/powerpc/platforms/pseries/hotplug-memory.c
index a1a368d..140d02a 100644
--- a/arch/powerpc/platforms/pseries/hotplug-memory.c
+++ b/arch/powerpc/platforms/pseries/hotplug-memory.c
@@ -21,7 +21,7 @@
struct zone *zone;
int ret;
- start_pfn = base >> PFN_SECTION_SHIFT;
+ start_pfn = base >> PAGE_SHIFT;
zone = page_zone(pfn_to_page(start_pfn));
/*
diff --git a/arch/powerpc/platforms/pseries/reconfig.c b/arch/powerpc/platforms/pseries/reconfig.c
index 7637bd3..c591a25 100644
--- a/arch/powerpc/platforms/pseries/reconfig.c
+++ b/arch/powerpc/platforms/pseries/reconfig.c
@@ -466,11 +466,11 @@
else
action = PSERIES_DRCONF_MEM_REMOVE;
- blocking_notifier_call_chain(&pSeries_reconfig_chain,
- action, value);
+ rc = blocking_notifier_call_chain(&pSeries_reconfig_chain,
+ action, value);
}
- return 0;
+ return rc;
}
/**
diff --git a/arch/powerpc/platforms/pseries/rtasd.c b/arch/powerpc/platforms/pseries/rtasd.c
index c9ffd8c..f4e55be 100644
--- a/arch/powerpc/platforms/pseries/rtasd.c
+++ b/arch/powerpc/platforms/pseries/rtasd.c
@@ -295,19 +295,29 @@
if (!tmp)
return -ENOMEM;
-
spin_lock_irqsave(&rtasd_log_lock, s);
/* if it's 0, then we know we got the last one (the one in NVRAM) */
- if (rtas_log_size == 0 && logging_enabled)
+ while (rtas_log_size == 0) {
+ if (file->f_flags & O_NONBLOCK) {
+ spin_unlock_irqrestore(&rtasd_log_lock, s);
+ error = -EAGAIN;
+ goto out;
+ }
+
+ if (!logging_enabled) {
+ spin_unlock_irqrestore(&rtasd_log_lock, s);
+ error = -ENODATA;
+ goto out;
+ }
nvram_clear_error_log();
- spin_unlock_irqrestore(&rtasd_log_lock, s);
+ spin_unlock_irqrestore(&rtasd_log_lock, s);
+ error = wait_event_interruptible(rtas_log_wait, rtas_log_size);
+ if (error)
+ goto out;
+ spin_lock_irqsave(&rtasd_log_lock, s);
+ }
- error = wait_event_interruptible(rtas_log_wait, rtas_log_size);
- if (error)
- goto out;
-
- spin_lock_irqsave(&rtasd_log_lock, s);
offset = rtas_error_log_buffer_max * (rtas_log_start & LOG_NUMBER_MASK);
memcpy(tmp, &rtas_log_buf[offset], count);
diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c
index 9d8f8c8..e00f96b 100644
--- a/arch/powerpc/platforms/pseries/smp.c
+++ b/arch/powerpc/platforms/pseries/smp.c
@@ -37,7 +37,6 @@
#include <asm/paca.h>
#include <asm/time.h>
#include <asm/machdep.h>
-#include "xics.h"
#include <asm/cputable.h>
#include <asm/firmware.h>
#include <asm/system.h>
@@ -49,6 +48,7 @@
#include "plpar_wrappers.h"
#include "pseries.h"
+#include "xics.h"
/*
@@ -105,36 +105,6 @@
}
#ifdef CONFIG_XICS
-static inline void smp_xics_do_message(int cpu, int msg)
-{
- set_bit(msg, &xics_ipi_message[cpu].value);
- mb();
- xics_cause_IPI(cpu);
-}
-
-static void smp_xics_message_pass(int target, int msg)
-{
- unsigned int i;
-
- if (target < NR_CPUS) {
- smp_xics_do_message(target, msg);
- } else {
- for_each_online_cpu(i) {
- if (target == MSG_ALL_BUT_SELF
- && i == smp_processor_id())
- continue;
- smp_xics_do_message(i, msg);
- }
- }
-}
-
-static int __init smp_xics_probe(void)
-{
- xics_request_IPIs();
-
- return cpus_weight(cpu_possible_map);
-}
-
static void __devinit smp_xics_setup_cpu(int cpu)
{
if (cpu != boot_cpuid)
diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c
index 0fc830f..e190477 100644
--- a/arch/powerpc/platforms/pseries/xics.c
+++ b/arch/powerpc/platforms/pseries/xics.c
@@ -9,32 +9,30 @@
* 2 of the License, or (at your option) any later version.
*/
-
#include <linux/types.h>
#include <linux/threads.h>
#include <linux/kernel.h>
#include <linux/irq.h>
#include <linux/smp.h>
#include <linux/interrupt.h>
-#include <linux/signal.h>
#include <linux/init.h>
-#include <linux/gfp.h>
#include <linux/radix-tree.h>
#include <linux/cpu.h>
+#include <linux/of.h>
#include <asm/firmware.h>
-#include <asm/prom.h>
#include <asm/io.h>
#include <asm/pgtable.h>
#include <asm/smp.h>
#include <asm/rtas.h>
#include <asm/hvcall.h>
#include <asm/machdep.h>
-#include <asm/i8259.h>
#include "xics.h"
#include "plpar_wrappers.h"
+static struct irq_host *xics_host;
+
#define XICS_IPI 2
#define XICS_IRQ_SPURIOUS 0
@@ -47,6 +45,20 @@
*/
#define IPI_PRIORITY 4
+static unsigned int default_server = 0xFF;
+static unsigned int default_distrib_server = 0;
+static unsigned int interrupt_server_size = 8;
+
+/* RTAS service tokens */
+static int ibm_get_xive;
+static int ibm_set_xive;
+static int ibm_int_on;
+static int ibm_int_off;
+
+
+/* Direct hardware low level accessors */
+
+/* The part of the interrupt presentation layer that we care about */
struct xics_ipl {
union {
u32 word;
@@ -65,27 +77,6 @@
static struct xics_ipl __iomem *xics_per_cpu[NR_CPUS];
-static unsigned int default_server = 0xFF;
-static unsigned int default_distrib_server = 0;
-static unsigned int interrupt_server_size = 8;
-
-static struct irq_host *xics_host;
-
-/*
- * XICS only has a single IPI, so encode the messages per CPU
- */
-struct xics_ipi_struct xics_ipi_message[NR_CPUS] __cacheline_aligned;
-
-/* RTAS service tokens */
-static int ibm_get_xive;
-static int ibm_set_xive;
-static int ibm_int_on;
-static int ibm_int_off;
-
-
-/* Direct HW low level accessors */
-
-
static inline unsigned int direct_xirr_info_get(void)
{
int cpu = smp_processor_id();
@@ -93,7 +84,7 @@
return in_be32(&xics_per_cpu[cpu]->xirr.word);
}
-static inline void direct_xirr_info_set(int value)
+static inline void direct_xirr_info_set(unsigned int value)
{
int cpu = smp_processor_id();
@@ -115,7 +106,6 @@
/* LPAR low level accessors */
-
static inline unsigned int lpar_xirr_info_get(void)
{
unsigned long lpar_rc;
@@ -127,15 +117,14 @@
return (unsigned int)return_value;
}
-static inline void lpar_xirr_info_set(int value)
+static inline void lpar_xirr_info_set(unsigned int value)
{
unsigned long lpar_rc;
- unsigned long val64 = value & 0xffffffff;
- lpar_rc = plpar_eoi(val64);
+ lpar_rc = plpar_eoi(value);
if (lpar_rc != H_SUCCESS)
- panic("bad return code EOI - rc = %ld, value=%lx\n", lpar_rc,
- val64);
+ panic("bad return code EOI - rc = %ld, value=%x\n", lpar_rc,
+ value);
}
static inline void lpar_cppr_info(u8 value)
@@ -157,48 +146,7 @@
}
-/* High level handlers and init code */
-
-static void xics_update_irq_servers(void)
-{
- int i, j;
- struct device_node *np;
- u32 ilen;
- const u32 *ireg, *isize;
- u32 hcpuid;
-
- /* Find the server numbers for the boot cpu. */
- np = of_get_cpu_node(boot_cpuid, NULL);
- BUG_ON(!np);
-
- ireg = of_get_property(np, "ibm,ppc-interrupt-gserver#s", &ilen);
- if (!ireg) {
- of_node_put(np);
- return;
- }
-
- i = ilen / sizeof(int);
- hcpuid = get_hard_smp_processor_id(boot_cpuid);
-
- /* Global interrupt distribution server is specified in the last
- * entry of "ibm,ppc-interrupt-gserver#s" property. Get the last
- * entry fom this property for current boot cpu id and use it as
- * default distribution server
- */
- for (j = 0; j < i; j += 2) {
- if (ireg[j] == hcpuid) {
- default_server = hcpuid;
- default_distrib_server = ireg[j+1];
-
- isize = of_get_property(np,
- "ibm,interrupt-server#-size", NULL);
- if (isize)
- interrupt_server_size = *isize;
- }
- }
-
- of_node_put(np);
-}
+/* Interface to generic irq subsystem */
#ifdef CONFIG_SMP
static int get_irq_server(unsigned int virq, unsigned int strict_check)
@@ -208,9 +156,6 @@
cpumask_t cpumask = irq_desc[virq].affinity;
cpumask_t tmp = CPU_MASK_NONE;
- if (! cpu_isset(default_server, cpu_online_map))
- xics_update_irq_servers();
-
if (!distribute_irqs)
return default_server;
@@ -238,7 +183,6 @@
}
#endif
-
static void xics_unmask_irq(unsigned int virq)
{
unsigned int irq;
@@ -257,21 +201,28 @@
call_status = rtas_call(ibm_set_xive, 3, 1, NULL, irq, server,
DEFAULT_PRIORITY);
if (call_status != 0) {
- printk(KERN_ERR "xics_enable_irq: irq=%u: ibm_set_xive "
- "returned %d\n", irq, call_status);
- printk("set_xive %x, server %x\n", ibm_set_xive, server);
+ printk(KERN_ERR
+ "%s: ibm_set_xive irq %u server %x returned %d\n",
+ __func__, irq, server, call_status);
return;
}
/* Now unmask the interrupt (often a no-op) */
call_status = rtas_call(ibm_int_on, 1, 1, NULL, irq);
if (call_status != 0) {
- printk(KERN_ERR "xics_enable_irq: irq=%u: ibm_int_on "
- "returned %d\n", irq, call_status);
+ printk(KERN_ERR "%s: ibm_int_on irq=%u returned %d\n",
+ __func__, irq, call_status);
return;
}
}
+static unsigned int xics_startup(unsigned int virq)
+{
+ /* unmask it */
+ xics_unmask_irq(virq);
+ return 0;
+}
+
static void xics_mask_real_irq(unsigned int irq)
{
int call_status;
@@ -281,8 +232,8 @@
call_status = rtas_call(ibm_int_off, 1, 1, NULL, irq);
if (call_status != 0) {
- printk(KERN_ERR "xics_disable_real_irq: irq=%u: "
- "ibm_int_off returned %d\n", irq, call_status);
+ printk(KERN_ERR "%s: ibm_int_off irq=%u returned %d\n",
+ __func__, irq, call_status);
return;
}
@@ -290,8 +241,8 @@
call_status = rtas_call(ibm_set_xive, 3, 1, NULL, irq,
default_server, 0xff);
if (call_status != 0) {
- printk(KERN_ERR "xics_disable_irq: irq=%u: ibm_set_xive(0xff)"
- " returned %d\n", irq, call_status);
+ printk(KERN_ERR "%s: ibm_set_xive(0xff) irq=%u returned %d\n",
+ __func__, irq, call_status);
return;
}
}
@@ -308,17 +259,61 @@
xics_mask_real_irq(irq);
}
-static unsigned int xics_startup(unsigned int virq)
+static void xics_mask_unknown_vec(unsigned int vec)
{
+ printk(KERN_ERR "Interrupt %u (real) is invalid, disabling it.\n", vec);
+ xics_mask_real_irq(vec);
+}
+
+static inline unsigned int xics_xirr_vector(unsigned int xirr)
+{
+ /*
+ * The top byte is the old cppr, to be restored on EOI.
+ * The remaining 24 bits are the vector.
+ */
+ return xirr & 0x00ffffff;
+}
+
+static unsigned int xics_get_irq_direct(void)
+{
+ unsigned int xirr = direct_xirr_info_get();
+ unsigned int vec = xics_xirr_vector(xirr);
unsigned int irq;
- /* force a reverse mapping of the interrupt so it gets in the cache */
- irq = (unsigned int)irq_map[virq].hwirq;
- irq_radix_revmap(xics_host, irq);
+ if (vec == XICS_IRQ_SPURIOUS)
+ return NO_IRQ;
- /* unmask it */
- xics_unmask_irq(virq);
- return 0;
+ irq = irq_radix_revmap_lookup(xics_host, vec);
+ if (likely(irq != NO_IRQ))
+ return irq;
+
+ /* We don't have a linux mapping, so have rtas mask it. */
+ xics_mask_unknown_vec(vec);
+
+ /* We might learn about it later, so EOI it */
+ direct_xirr_info_set(xirr);
+ return NO_IRQ;
+}
+
+static unsigned int xics_get_irq_lpar(void)
+{
+ unsigned int xirr = lpar_xirr_info_get();
+ unsigned int vec = xics_xirr_vector(xirr);
+ unsigned int irq;
+
+ if (vec == XICS_IRQ_SPURIOUS)
+ return NO_IRQ;
+
+ irq = irq_radix_revmap_lookup(xics_host, vec);
+ if (likely(irq != NO_IRQ))
+ return irq;
+
+ /* We don't have a linux mapping, so have RTAS mask it. */
+ xics_mask_unknown_vec(vec);
+
+ /* We might learn about it later, so EOI it */
+ lpar_xirr_info_set(xirr);
+ return NO_IRQ;
}
static void xics_eoi_direct(unsigned int virq)
@@ -329,7 +324,6 @@
direct_xirr_info_set((0xff << 24) | irq);
}
-
static void xics_eoi_lpar(unsigned int virq)
{
unsigned int irq = (unsigned int)irq_map[virq].hwirq;
@@ -338,104 +332,6 @@
lpar_xirr_info_set((0xff << 24) | irq);
}
-static inline unsigned int xics_remap_irq(unsigned int vec)
-{
- unsigned int irq;
-
- vec &= 0x00ffffff;
-
- if (vec == XICS_IRQ_SPURIOUS)
- return NO_IRQ;
- irq = irq_radix_revmap(xics_host, vec);
- if (likely(irq != NO_IRQ))
- return irq;
-
- printk(KERN_ERR "Interrupt %u (real) is invalid,"
- " disabling it.\n", vec);
- xics_mask_real_irq(vec);
- return NO_IRQ;
-}
-
-static unsigned int xics_get_irq_direct(void)
-{
- return xics_remap_irq(direct_xirr_info_get());
-}
-
-static unsigned int xics_get_irq_lpar(void)
-{
- return xics_remap_irq(lpar_xirr_info_get());
-}
-
-#ifdef CONFIG_SMP
-
-static irqreturn_t xics_ipi_dispatch(int cpu)
-{
- WARN_ON(cpu_is_offline(cpu));
-
- while (xics_ipi_message[cpu].value) {
- if (test_and_clear_bit(PPC_MSG_CALL_FUNCTION,
- &xics_ipi_message[cpu].value)) {
- mb();
- smp_message_recv(PPC_MSG_CALL_FUNCTION);
- }
- if (test_and_clear_bit(PPC_MSG_RESCHEDULE,
- &xics_ipi_message[cpu].value)) {
- mb();
- smp_message_recv(PPC_MSG_RESCHEDULE);
- }
- if (test_and_clear_bit(PPC_MSG_CALL_FUNC_SINGLE,
- &xics_ipi_message[cpu].value)) {
- mb();
- smp_message_recv(PPC_MSG_CALL_FUNC_SINGLE);
- }
-#if defined(CONFIG_DEBUGGER) || defined(CONFIG_KEXEC)
- if (test_and_clear_bit(PPC_MSG_DEBUGGER_BREAK,
- &xics_ipi_message[cpu].value)) {
- mb();
- smp_message_recv(PPC_MSG_DEBUGGER_BREAK);
- }
-#endif
- }
- return IRQ_HANDLED;
-}
-
-static irqreturn_t xics_ipi_action_direct(int irq, void *dev_id)
-{
- int cpu = smp_processor_id();
-
- direct_qirr_info(cpu, 0xff);
-
- return xics_ipi_dispatch(cpu);
-}
-
-static irqreturn_t xics_ipi_action_lpar(int irq, void *dev_id)
-{
- int cpu = smp_processor_id();
-
- lpar_qirr_info(cpu, 0xff);
-
- return xics_ipi_dispatch(cpu);
-}
-
-void xics_cause_IPI(int cpu)
-{
- if (firmware_has_feature(FW_FEATURE_LPAR))
- lpar_qirr_info(cpu, IPI_PRIORITY);
- else
- direct_qirr_info(cpu, IPI_PRIORITY);
-}
-
-#endif /* CONFIG_SMP */
-
-static void xics_set_cpu_priority(unsigned char cppr)
-{
- if (firmware_has_feature(FW_FEATURE_LPAR))
- lpar_cppr_info(cppr);
- else
- direct_cppr_info(cppr);
- iosync();
-}
-
static void xics_set_affinity(unsigned int virq, cpumask_t cpumask)
{
unsigned int irq;
@@ -450,8 +346,8 @@
status = rtas_call(ibm_get_xive, 1, 3, xics_status, irq);
if (status) {
- printk(KERN_ERR "xics_set_affinity: irq=%u ibm,get-xive "
- "returns %d\n", irq, status);
+ printk(KERN_ERR "%s: ibm,get-xive irq=%u returns %d\n",
+ __func__, irq, status);
return;
}
@@ -463,8 +359,9 @@
if (irq_server == -1) {
char cpulist[128];
cpumask_scnprintf(cpulist, sizeof(cpulist), cpumask);
- printk(KERN_WARNING "xics_set_affinity: No online cpus in "
- "the mask %s for irq %d\n", cpulist, virq);
+ printk(KERN_WARNING
+ "%s: No online cpus in the mask %s for irq %d\n",
+ __func__, cpulist, virq);
return;
}
@@ -472,28 +369,12 @@
irq, irq_server, xics_status[1]);
if (status) {
- printk(KERN_ERR "xics_set_affinity: irq=%u ibm,set-xive "
- "returns %d\n", irq, status);
+ printk(KERN_ERR "%s: ibm,set-xive irq=%u returns %d\n",
+ __func__, irq, status);
return;
}
}
-void xics_setup_cpu(void)
-{
- xics_set_cpu_priority(0xff);
-
- /*
- * Put the calling processor into the GIQ. This is really only
- * necessary from a secondary thread as the OF start-cpu interface
- * performs this function for us on primary threads.
- *
- * XXX: undo of teardown on kexec needs this too, as may hotplug
- */
- rtas_set_indicator_fast(GLOBAL_INTERRUPT_QUEUE,
- (1UL << interrupt_server_size) - 1 - default_distrib_server, 1);
-}
-
-
static struct irq_chip xics_pic_direct = {
.typename = " XICS ",
.startup = xics_startup,
@@ -503,7 +384,6 @@
.set_affinity = xics_set_affinity
};
-
static struct irq_chip xics_pic_lpar = {
.typename = " XICS ",
.startup = xics_startup,
@@ -513,6 +393,9 @@
.set_affinity = xics_set_affinity
};
+
+/* Interface to arch irq controller subsystem layer */
+
/* Points to the irq_chip we're actually using */
static struct irq_chip *xics_irq_chip;
@@ -530,6 +413,9 @@
{
pr_debug("xics: map virq %d, hwirq 0x%lx\n", virq, hw);
+ /* Insert the interrupt mapping into the radix tree for fast lookup */
+ irq_radix_revmap_insert(xics_host, virq, hw);
+
get_irq_desc(virq)->status |= IRQ_LEVEL;
set_irq_chip_and_handler(virq, xics_irq_chip, handle_fasteoi_irq);
return 0;
@@ -569,10 +455,169 @@
irq_set_default_host(xics_host);
}
+
+/* Inter-processor interrupt support */
+
+#ifdef CONFIG_SMP
+/*
+ * XICS only has a single IPI, so encode the messages per CPU
+ */
+struct xics_ipi_struct {
+ unsigned long value;
+ } ____cacheline_aligned;
+
+static struct xics_ipi_struct xics_ipi_message[NR_CPUS] __cacheline_aligned;
+
+static inline void smp_xics_do_message(int cpu, int msg)
+{
+ set_bit(msg, &xics_ipi_message[cpu].value);
+ mb();
+ if (firmware_has_feature(FW_FEATURE_LPAR))
+ lpar_qirr_info(cpu, IPI_PRIORITY);
+ else
+ direct_qirr_info(cpu, IPI_PRIORITY);
+}
+
+void smp_xics_message_pass(int target, int msg)
+{
+ unsigned int i;
+
+ if (target < NR_CPUS) {
+ smp_xics_do_message(target, msg);
+ } else {
+ for_each_online_cpu(i) {
+ if (target == MSG_ALL_BUT_SELF
+ && i == smp_processor_id())
+ continue;
+ smp_xics_do_message(i, msg);
+ }
+ }
+}
+
+static irqreturn_t xics_ipi_dispatch(int cpu)
+{
+ WARN_ON(cpu_is_offline(cpu));
+
+ mb(); /* order mmio clearing qirr */
+ while (xics_ipi_message[cpu].value) {
+ if (test_and_clear_bit(PPC_MSG_CALL_FUNCTION,
+ &xics_ipi_message[cpu].value)) {
+ smp_message_recv(PPC_MSG_CALL_FUNCTION);
+ }
+ if (test_and_clear_bit(PPC_MSG_RESCHEDULE,
+ &xics_ipi_message[cpu].value)) {
+ smp_message_recv(PPC_MSG_RESCHEDULE);
+ }
+ if (test_and_clear_bit(PPC_MSG_CALL_FUNC_SINGLE,
+ &xics_ipi_message[cpu].value)) {
+ smp_message_recv(PPC_MSG_CALL_FUNC_SINGLE);
+ }
+#if defined(CONFIG_DEBUGGER) || defined(CONFIG_KEXEC)
+ if (test_and_clear_bit(PPC_MSG_DEBUGGER_BREAK,
+ &xics_ipi_message[cpu].value)) {
+ smp_message_recv(PPC_MSG_DEBUGGER_BREAK);
+ }
+#endif
+ }
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t xics_ipi_action_direct(int irq, void *dev_id)
+{
+ int cpu = smp_processor_id();
+
+ direct_qirr_info(cpu, 0xff);
+
+ return xics_ipi_dispatch(cpu);
+}
+
+static irqreturn_t xics_ipi_action_lpar(int irq, void *dev_id)
+{
+ int cpu = smp_processor_id();
+
+ lpar_qirr_info(cpu, 0xff);
+
+ return xics_ipi_dispatch(cpu);
+}
+
+static void xics_request_ipi(void)
+{
+ unsigned int ipi;
+ int rc;
+
+ ipi = irq_create_mapping(xics_host, XICS_IPI);
+ BUG_ON(ipi == NO_IRQ);
+
+ /*
+ * IPIs are marked IRQF_DISABLED as they must run with irqs
+ * disabled
+ */
+ set_irq_handler(ipi, handle_percpu_irq);
+ if (firmware_has_feature(FW_FEATURE_LPAR))
+ rc = request_irq(ipi, xics_ipi_action_lpar,
+ IRQF_DISABLED|IRQF_PERCPU, "IPI", NULL);
+ else
+ rc = request_irq(ipi, xics_ipi_action_direct,
+ IRQF_DISABLED|IRQF_PERCPU, "IPI", NULL);
+ BUG_ON(rc);
+}
+
+int __init smp_xics_probe(void)
+{
+ xics_request_ipi();
+
+ return cpus_weight(cpu_possible_map);
+}
+
+#endif /* CONFIG_SMP */
+
+
+/* Initialization */
+
+static void xics_update_irq_servers(void)
+{
+ int i, j;
+ struct device_node *np;
+ u32 ilen;
+ const u32 *ireg, *isize;
+ u32 hcpuid;
+
+ /* Find the server numbers for the boot cpu. */
+ np = of_get_cpu_node(boot_cpuid, NULL);
+ BUG_ON(!np);
+
+ ireg = of_get_property(np, "ibm,ppc-interrupt-gserver#s", &ilen);
+ if (!ireg) {
+ of_node_put(np);
+ return;
+ }
+
+ i = ilen / sizeof(int);
+ hcpuid = get_hard_smp_processor_id(boot_cpuid);
+
+ /* Global interrupt distribution server is specified in the last
+ * entry of "ibm,ppc-interrupt-gserver#s" property. Get the last
+ * entry fom this property for current boot cpu id and use it as
+ * default distribution server
+ */
+ for (j = 0; j < i; j += 2) {
+ if (ireg[j] == hcpuid) {
+ default_server = hcpuid;
+ default_distrib_server = ireg[j+1];
+ }
+ }
+
+ /* get the bit size of server numbers */
+ isize = of_get_property(np, "ibm,interrupt-server#-size", NULL);
+ if (isize)
+ interrupt_server_size = *isize;
+
+ of_node_put(np);
+}
+
static void __init xics_map_one_cpu(int hw_id, unsigned long addr,
unsigned long size)
{
-#ifdef CONFIG_SMP
int i;
/* This may look gross but it's good enough for now, we don't quite
@@ -586,11 +631,6 @@
return;
}
}
-#else
- if (hw_id != 0)
- return;
- xics_per_cpu[0] = ioremap(addr, size);
-#endif /* CONFIG_SMP */
}
static void __init xics_init_one_node(struct device_node *np,
@@ -652,15 +692,17 @@
for_each_node_by_type(np, "PowerPC-External-Interrupt-Presentation") {
found = 1;
- if (firmware_has_feature(FW_FEATURE_LPAR))
+ if (firmware_has_feature(FW_FEATURE_LPAR)) {
+ of_node_put(np);
break;
+ }
xics_init_one_node(np, &indx);
}
if (found == 0)
return;
- xics_init_host();
xics_update_irq_servers();
+ xics_init_host();
if (firmware_has_feature(FW_FEATURE_LPAR))
ppc_md.get_irq = xics_get_irq_lpar;
@@ -672,30 +714,31 @@
ppc64_boot_msg(0x21, "XICS Done");
}
+/* Cpu startup, shutdown, and hotplug */
-#ifdef CONFIG_SMP
-void xics_request_IPIs(void)
+static void xics_set_cpu_priority(unsigned char cppr)
{
- unsigned int ipi;
- int rc;
-
- ipi = irq_create_mapping(xics_host, XICS_IPI);
- BUG_ON(ipi == NO_IRQ);
-
- /*
- * IPIs are marked IRQF_DISABLED as they must run with irqs
- * disabled
- */
- set_irq_handler(ipi, handle_percpu_irq);
if (firmware_has_feature(FW_FEATURE_LPAR))
- rc = request_irq(ipi, xics_ipi_action_lpar, IRQF_DISABLED,
- "IPI", NULL);
+ lpar_cppr_info(cppr);
else
- rc = request_irq(ipi, xics_ipi_action_direct, IRQF_DISABLED,
- "IPI", NULL);
- BUG_ON(rc);
+ direct_cppr_info(cppr);
+ iosync();
}
-#endif /* CONFIG_SMP */
+
+/* Have the calling processor join or leave the specified global queue */
+static void xics_set_cpu_giq(unsigned int gserver, unsigned int join)
+{
+ int status = rtas_set_indicator_fast(GLOBAL_INTERRUPT_QUEUE,
+ (1UL << interrupt_server_size) - 1 - gserver, join);
+ WARN_ON(status < 0);
+}
+
+void xics_setup_cpu(void)
+{
+ xics_set_cpu_priority(0xff);
+
+ xics_set_cpu_giq(default_distrib_server, 1);
+}
void xics_teardown_cpu(void)
{
@@ -703,9 +746,7 @@
xics_set_cpu_priority(0);
- /*
- * Clear IPI
- */
+ /* Clear any pending IPI request */
if (firmware_has_feature(FW_FEATURE_LPAR))
lpar_qirr_info(cpu, 0xff);
else
@@ -714,34 +755,28 @@
void xics_kexec_teardown_cpu(int secondary)
{
- unsigned int ipi;
- struct irq_desc *desc;
-
xics_teardown_cpu();
/*
- * we need to EOI the IPI
+ * we take the ipi irq but and never return so we
+ * need to EOI the IPI, but want to leave our priority 0
*
- * probably need to check all the other interrupts too
+ * should we check all the other interrupts too?
* should we be flagging idle loop instead?
* or creating some task to be scheduled?
*/
- ipi = irq_find_mapping(xics_host, XICS_IPI);
- if (ipi == XICS_IRQ_SPURIOUS)
- return;
- desc = get_irq_desc(ipi);
- if (desc->chip && desc->chip->eoi)
- desc->chip->eoi(ipi);
+ if (firmware_has_feature(FW_FEATURE_LPAR))
+ lpar_xirr_info_set((0x00 << 24) | XICS_IPI);
+ else
+ direct_xirr_info_set((0x00 << 24) | XICS_IPI);
/*
* Some machines need to have at least one cpu in the GIQ,
* so leave the master cpu in the group.
*/
if (secondary)
- rtas_set_indicator_fast(GLOBAL_INTERRUPT_QUEUE,
- (1UL << interrupt_server_size) - 1 -
- default_distrib_server, 0);
+ xics_set_cpu_giq(default_distrib_server, 0);
}
#ifdef CONFIG_HOTPLUG_CPU
@@ -749,17 +784,18 @@
/* Interrupts are disabled. */
void xics_migrate_irqs_away(void)
{
- int status;
int cpu = smp_processor_id(), hw_cpu = hard_smp_processor_id();
unsigned int irq, virq;
+ /* If we used to be the default server, move to the new "boot_cpuid" */
+ if (hw_cpu == default_server)
+ xics_update_irq_servers();
+
/* Reject any interrupt that was queued to us... */
xics_set_cpu_priority(0);
- /* remove ourselves from the global interrupt queue */
- status = rtas_set_indicator_fast(GLOBAL_INTERRUPT_QUEUE,
- (1UL << interrupt_server_size) - 1 - default_distrib_server, 0);
- WARN_ON(status < 0);
+ /* Remove ourselves from the global interrupt queue */
+ xics_set_cpu_giq(default_distrib_server, 0);
/* Allow IPIs again... */
xics_set_cpu_priority(DEFAULT_PRIORITY);
@@ -767,6 +803,7 @@
for_each_irq(virq) {
struct irq_desc *desc;
int xics_status[2];
+ int status;
unsigned long flags;
/* We cant set affinity on ISA interrupts */
@@ -790,9 +827,8 @@
status = rtas_call(ibm_get_xive, 1, 3, xics_status, irq);
if (status) {
- printk(KERN_ERR "migrate_irqs_away: irq=%u "
- "ibm,get-xive returns %d\n",
- virq, status);
+ printk(KERN_ERR "%s: ibm,get-xive irq=%u returns %d\n",
+ __func__, irq, status);
goto unlock;
}
diff --git a/arch/powerpc/platforms/pseries/xics.h b/arch/powerpc/platforms/pseries/xics.h
index 1c5321a..d1d5a83 100644
--- a/arch/powerpc/platforms/pseries/xics.h
+++ b/arch/powerpc/platforms/pseries/xics.h
@@ -12,20 +12,12 @@
#ifndef _POWERPC_KERNEL_XICS_H
#define _POWERPC_KERNEL_XICS_H
-#include <linux/cache.h>
-
extern void xics_init_IRQ(void);
extern void xics_setup_cpu(void);
extern void xics_teardown_cpu(void);
extern void xics_kexec_teardown_cpu(int secondary);
-extern void xics_cause_IPI(int cpu);
-extern void xics_request_IPIs(void);
extern void xics_migrate_irqs_away(void);
-
-struct xics_ipi_struct {
- volatile unsigned long value;
-} ____cacheline_aligned;
-
-extern struct xics_ipi_struct xics_ipi_message[NR_CPUS] __cacheline_aligned;
+extern int smp_xics_probe(void);
+extern void smp_xics_message_pass(int target, int msg);
#endif /* _POWERPC_KERNEL_XICS_H */
diff --git a/arch/powerpc/sysdev/Kconfig b/arch/powerpc/sysdev/Kconfig
index 72fb35b..3965828 100644
--- a/arch/powerpc/sysdev/Kconfig
+++ b/arch/powerpc/sysdev/Kconfig
@@ -6,3 +6,9 @@
bool
depends on PCI && 4xx
default n
+
+config PPC_MSI_BITMAP
+ bool
+ depends on PCI_MSI
+ default y if MPIC
+ default y if FSL_PCI
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index a90054b..a44709a 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -5,6 +5,7 @@
mpic-msi-obj-$(CONFIG_PCI_MSI) += mpic_msi.o mpic_u3msi.o mpic_pasemi_msi.o
obj-$(CONFIG_MPIC) += mpic.o $(mpic-msi-obj-y)
fsl-msi-obj-$(CONFIG_PCI_MSI) += fsl_msi.o
+obj-$(CONFIG_PPC_MSI_BITMAP) += msi_bitmap.o
obj-$(CONFIG_PPC_MPC106) += grackle.o
obj-$(CONFIG_PPC_DCR_NATIVE) += dcr-low.o
@@ -15,6 +16,7 @@
obj-$(CONFIG_FSL_PCI) += fsl_pci.o $(fsl-msi-obj-y)
obj-$(CONFIG_FSL_LBC) += fsl_lbc.o
obj-$(CONFIG_FSL_GTM) += fsl_gtm.o
+obj-$(CONFIG_MPC8xxx_GPIO) += mpc8xxx_gpio.o
obj-$(CONFIG_RAPIDIO) += fsl_rio.o
obj-$(CONFIG_TSI108_BRIDGE) += tsi108_pci.o tsi108_dev.o
obj-$(CONFIG_QUICC_ENGINE) += qe_lib/
@@ -36,15 +38,12 @@
obj-$(CONFIG_4xx) += ppc4xx_pci.o
endif
-# Temporary hack until we have migrated to asm-powerpc
-ifeq ($(ARCH),powerpc)
obj-$(CONFIG_CPM) += cpm_common.o
obj-$(CONFIG_CPM2) += cpm2.o cpm2_pic.o
obj-$(CONFIG_QUICC_ENGINE) += cpm_common.o
obj-$(CONFIG_PPC_DCR) += dcr.o
obj-$(CONFIG_8xx) += mpc8xx_pic.o cpm1.o
obj-$(CONFIG_UCODE_PATCH) += micropatch.o
-endif
ifeq ($(CONFIG_SUSPEND),y)
obj-$(CONFIG_6xx) += 6xx-suspend.o
diff --git a/arch/powerpc/sysdev/cpm1.c b/arch/powerpc/sysdev/cpm1.c
index 4a04823..490473c 100644
--- a/arch/powerpc/sysdev/cpm1.c
+++ b/arch/powerpc/sysdev/cpm1.c
@@ -546,37 +546,48 @@
return !!(in_be16(&iop->dat) & pin_mask);
}
+static void __cpm1_gpio16_set(struct of_mm_gpio_chip *mm_gc, u16 pin_mask,
+ int value)
+{
+ struct cpm1_gpio16_chip *cpm1_gc = to_cpm1_gpio16_chip(mm_gc);
+ struct cpm_ioport16 __iomem *iop = mm_gc->regs;
+
+ if (value)
+ cpm1_gc->cpdata |= pin_mask;
+ else
+ cpm1_gc->cpdata &= ~pin_mask;
+
+ out_be16(&iop->dat, cpm1_gc->cpdata);
+}
+
static void cpm1_gpio16_set(struct gpio_chip *gc, unsigned int gpio, int value)
{
struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
struct cpm1_gpio16_chip *cpm1_gc = to_cpm1_gpio16_chip(mm_gc);
+ unsigned long flags;
+ u16 pin_mask = 1 << (15 - gpio);
+
+ spin_lock_irqsave(&cpm1_gc->lock, flags);
+
+ __cpm1_gpio16_set(mm_gc, pin_mask, value);
+
+ spin_unlock_irqrestore(&cpm1_gc->lock, flags);
+}
+
+static int cpm1_gpio16_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct cpm1_gpio16_chip *cpm1_gc = to_cpm1_gpio16_chip(mm_gc);
struct cpm_ioport16 __iomem *iop = mm_gc->regs;
unsigned long flags;
u16 pin_mask = 1 << (15 - gpio);
spin_lock_irqsave(&cpm1_gc->lock, flags);
- if (value)
- cpm1_gc->cpdata |= pin_mask;
- else
- cpm1_gc->cpdata &= ~pin_mask;
-
- out_be16(&iop->dat, cpm1_gc->cpdata);
+ setbits16(&iop->dir, pin_mask);
+ __cpm1_gpio16_set(mm_gc, pin_mask, val);
spin_unlock_irqrestore(&cpm1_gc->lock, flags);
-}
-
-static int cpm1_gpio16_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
-{
- struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
- struct cpm_ioport16 __iomem *iop = mm_gc->regs;
- u16 pin_mask;
-
- pin_mask = 1 << (15 - gpio);
-
- setbits16(&iop->dir, pin_mask);
-
- cpm1_gpio16_set(gc, gpio, val);
return 0;
}
@@ -584,13 +595,17 @@
static int cpm1_gpio16_dir_in(struct gpio_chip *gc, unsigned int gpio)
{
struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct cpm1_gpio16_chip *cpm1_gc = to_cpm1_gpio16_chip(mm_gc);
struct cpm_ioport16 __iomem *iop = mm_gc->regs;
- u16 pin_mask;
+ unsigned long flags;
+ u16 pin_mask = 1 << (15 - gpio);
- pin_mask = 1 << (15 - gpio);
+ spin_lock_irqsave(&cpm1_gc->lock, flags);
clrbits16(&iop->dir, pin_mask);
+ spin_unlock_irqrestore(&cpm1_gc->lock, flags);
+
return 0;
}
@@ -655,37 +670,48 @@
return !!(in_be32(&iop->dat) & pin_mask);
}
+static void __cpm1_gpio32_set(struct of_mm_gpio_chip *mm_gc, u32 pin_mask,
+ int value)
+{
+ struct cpm1_gpio32_chip *cpm1_gc = to_cpm1_gpio32_chip(mm_gc);
+ struct cpm_ioport32b __iomem *iop = mm_gc->regs;
+
+ if (value)
+ cpm1_gc->cpdata |= pin_mask;
+ else
+ cpm1_gc->cpdata &= ~pin_mask;
+
+ out_be32(&iop->dat, cpm1_gc->cpdata);
+}
+
static void cpm1_gpio32_set(struct gpio_chip *gc, unsigned int gpio, int value)
{
struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
struct cpm1_gpio32_chip *cpm1_gc = to_cpm1_gpio32_chip(mm_gc);
+ unsigned long flags;
+ u32 pin_mask = 1 << (31 - gpio);
+
+ spin_lock_irqsave(&cpm1_gc->lock, flags);
+
+ __cpm1_gpio32_set(mm_gc, pin_mask, value);
+
+ spin_unlock_irqrestore(&cpm1_gc->lock, flags);
+}
+
+static int cpm1_gpio32_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct cpm1_gpio32_chip *cpm1_gc = to_cpm1_gpio32_chip(mm_gc);
struct cpm_ioport32b __iomem *iop = mm_gc->regs;
unsigned long flags;
u32 pin_mask = 1 << (31 - gpio);
spin_lock_irqsave(&cpm1_gc->lock, flags);
- if (value)
- cpm1_gc->cpdata |= pin_mask;
- else
- cpm1_gc->cpdata &= ~pin_mask;
-
- out_be32(&iop->dat, cpm1_gc->cpdata);
+ setbits32(&iop->dir, pin_mask);
+ __cpm1_gpio32_set(mm_gc, pin_mask, val);
spin_unlock_irqrestore(&cpm1_gc->lock, flags);
-}
-
-static int cpm1_gpio32_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
-{
- struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
- struct cpm_ioport32b __iomem *iop = mm_gc->regs;
- u32 pin_mask;
-
- pin_mask = 1 << (31 - gpio);
-
- setbits32(&iop->dir, pin_mask);
-
- cpm1_gpio32_set(gc, gpio, val);
return 0;
}
@@ -693,13 +719,17 @@
static int cpm1_gpio32_dir_in(struct gpio_chip *gc, unsigned int gpio)
{
struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct cpm1_gpio32_chip *cpm1_gc = to_cpm1_gpio32_chip(mm_gc);
struct cpm_ioport32b __iomem *iop = mm_gc->regs;
- u32 pin_mask;
+ unsigned long flags;
+ u32 pin_mask = 1 << (31 - gpio);
- pin_mask = 1 << (31 - gpio);
+ spin_lock_irqsave(&cpm1_gc->lock, flags);
clrbits32(&iop->dir, pin_mask);
+ spin_unlock_irqrestore(&cpm1_gc->lock, flags);
+
return 0;
}
diff --git a/arch/powerpc/sysdev/fsl_lbc.c b/arch/powerpc/sysdev/fsl_lbc.c
index 422c8fa..0494ee5 100644
--- a/arch/powerpc/sysdev/fsl_lbc.c
+++ b/arch/powerpc/sysdev/fsl_lbc.c
@@ -11,14 +11,19 @@
* (at your option) any later version.
*/
+#include <linux/init.h>
+#include <linux/module.h>
#include <linux/kernel.h>
+#include <linux/compiler.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+#include <linux/io.h>
#include <linux/of.h>
+#include <asm/prom.h>
#include <asm/fsl_lbc.h>
-spinlock_t fsl_lbc_lock = __SPIN_LOCK_UNLOCKED(fsl_lbc_lock);
-
-struct fsl_lbc_regs __iomem *fsl_lbc_regs;
-EXPORT_SYMBOL(fsl_lbc_regs);
+static spinlock_t fsl_lbc_lock = __SPIN_LOCK_UNLOCKED(fsl_lbc_lock);
+static struct fsl_lbc_regs __iomem *fsl_lbc_regs;
static char __initdata *compat_lbc[] = {
"fsl,pq2-localbus",
@@ -127,3 +132,43 @@
return 0;
}
EXPORT_SYMBOL(fsl_upm_find);
+
+/**
+ * fsl_upm_run_pattern - actually run an UPM pattern
+ * @upm: pointer to the fsl_upm structure obtained via fsl_upm_find
+ * @io_base: remapped pointer to where memory access should happen
+ * @mar: MAR register content during pattern execution
+ *
+ * This function triggers dummy write to the memory specified by the io_base,
+ * thus UPM pattern actually executed. Note that mar usage depends on the
+ * pre-programmed AMX bits in the UPM RAM.
+ */
+int fsl_upm_run_pattern(struct fsl_upm *upm, void __iomem *io_base, u32 mar)
+{
+ int ret = 0;
+ unsigned long flags;
+
+ spin_lock_irqsave(&fsl_lbc_lock, flags);
+
+ out_be32(&fsl_lbc_regs->mar, mar << (32 - upm->width));
+
+ switch (upm->width) {
+ case 8:
+ out_8(io_base, 0x0);
+ break;
+ case 16:
+ out_be16(io_base, 0x0);
+ break;
+ case 32:
+ out_be32(io_base, 0x0);
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+ spin_unlock_irqrestore(&fsl_lbc_lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL(fsl_upm_run_pattern);
diff --git a/arch/powerpc/sysdev/fsl_msi.c b/arch/powerpc/sysdev/fsl_msi.c
index 2c5187c..f25ce81 100644
--- a/arch/powerpc/sysdev/fsl_msi.c
+++ b/arch/powerpc/sysdev/fsl_msi.c
@@ -14,7 +14,6 @@
*/
#include <linux/irq.h>
#include <linux/bootmem.h>
-#include <linux/bitmap.h>
#include <linux/msi.h>
#include <linux/pci.h>
#include <linux/of_platform.h>
@@ -67,95 +66,22 @@
.map = fsl_msi_host_map,
};
-static irq_hw_number_t fsl_msi_alloc_hwirqs(struct fsl_msi *msi, int num)
-{
- unsigned long flags;
- int order = get_count_order(num);
- int offset;
-
- spin_lock_irqsave(&msi->bitmap_lock, flags);
-
- offset = bitmap_find_free_region(msi->fsl_msi_bitmap,
- NR_MSI_IRQS, order);
-
- spin_unlock_irqrestore(&msi->bitmap_lock, flags);
-
- pr_debug("%s: allocated 0x%x (2^%d) at offset 0x%x\n",
- __func__, num, order, offset);
-
- return offset;
-}
-
-static void fsl_msi_free_hwirqs(struct fsl_msi *msi, int offset, int num)
-{
- unsigned long flags;
- int order = get_count_order(num);
-
- pr_debug("%s: freeing 0x%x (2^%d) at offset 0x%x\n",
- __func__, num, order, offset);
-
- spin_lock_irqsave(&msi->bitmap_lock, flags);
- bitmap_release_region(msi->fsl_msi_bitmap, offset, order);
- spin_unlock_irqrestore(&msi->bitmap_lock, flags);
-}
-
-static int fsl_msi_free_dt_hwirqs(struct fsl_msi *msi)
-{
- int i;
- int len;
- const u32 *p;
-
- bitmap_allocate_region(msi->fsl_msi_bitmap, 0,
- get_count_order(NR_MSI_IRQS));
-
- p = of_get_property(msi->of_node, "msi-available-ranges", &len);
-
- if (!p) {
- /* No msi-available-ranges property,
- * All the 256 MSI interrupts can be used
- */
- fsl_msi_free_hwirqs(msi, 0, 0x100);
- return 0;
- }
-
- if ((len % (2 * sizeof(u32))) != 0) {
- printk(KERN_WARNING "fsl_msi: Malformed msi-available-ranges "
- "property on %s\n", msi->of_node->full_name);
- return -EINVAL;
- }
-
- /* Format is: (<u32 start> <u32 count>)+ */
- len /= 2 * sizeof(u32);
- for (i = 0; i < len; i++, p += 2)
- fsl_msi_free_hwirqs(msi, *p, *(p + 1));
-
- return 0;
-}
-
static int fsl_msi_init_allocator(struct fsl_msi *msi_data)
{
int rc;
- int size = BITS_TO_LONGS(NR_MSI_IRQS) * sizeof(u32);
- msi_data->fsl_msi_bitmap = kzalloc(size, GFP_KERNEL);
+ rc = msi_bitmap_alloc(&msi_data->bitmap, NR_MSI_IRQS,
+ msi_data->irqhost->of_node);
+ if (rc)
+ return rc;
- if (msi_data->fsl_msi_bitmap == NULL) {
- pr_debug("%s: ENOMEM allocating allocator bitmap!\n",
- __func__);
- return -ENOMEM;
+ rc = msi_bitmap_reserve_dt_hwirqs(&msi_data->bitmap);
+ if (rc < 0) {
+ msi_bitmap_free(&msi_data->bitmap);
+ return rc;
}
- rc = fsl_msi_free_dt_hwirqs(msi_data);
- if (rc)
- goto out_free;
-
return 0;
-out_free:
- kfree(msi_data->fsl_msi_bitmap);
-
- msi_data->fsl_msi_bitmap = NULL;
- return rc;
-
}
static int fsl_msi_check_device(struct pci_dev *pdev, int nvec, int type)
@@ -175,7 +101,8 @@
if (entry->irq == NO_IRQ)
continue;
set_irq_msi(entry->irq, NULL);
- fsl_msi_free_hwirqs(msi_data, virq_to_hw(entry->irq), 1);
+ msi_bitmap_free_hwirqs(&msi_data->bitmap,
+ virq_to_hw(entry->irq), 1);
irq_dispose_mapping(entry->irq);
}
@@ -197,15 +124,14 @@
static int fsl_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
{
- irq_hw_number_t hwirq;
- int rc;
+ int rc, hwirq;
unsigned int virq;
struct msi_desc *entry;
struct msi_msg msg;
struct fsl_msi *msi_data = fsl_msi;
list_for_each_entry(entry, &pdev->msi_list, list) {
- hwirq = fsl_msi_alloc_hwirqs(msi_data, 1);
+ hwirq = msi_bitmap_alloc_hwirqs(&msi_data->bitmap, 1);
if (hwirq < 0) {
rc = hwirq;
pr_debug("%s: fail allocating msi interrupt\n",
@@ -216,9 +142,9 @@
virq = irq_create_mapping(msi_data->irqhost, hwirq);
if (virq == NO_IRQ) {
- pr_debug("%s: fail mapping hwirq 0x%lx\n",
+ pr_debug("%s: fail mapping hwirq 0x%x\n",
__func__, hwirq);
- fsl_msi_free_hwirqs(msi_data, hwirq, 1);
+ msi_bitmap_free_hwirqs(&msi_data->bitmap, hwirq, 1);
rc = -ENOSPC;
goto out_free;
}
@@ -317,14 +243,11 @@
goto error_out;
}
- msi->of_node = of_node_get(dev->node);
+ msi->irqhost = irq_alloc_host(dev->node, IRQ_HOST_MAP_LINEAR,
+ NR_MSI_IRQS, &fsl_msi_host_ops, 0);
- msi->irqhost = irq_alloc_host(of_node_get(dev->node),
- IRQ_HOST_MAP_LINEAR,
- NR_MSI_IRQS, &fsl_msi_host_ops, 0);
if (msi->irqhost == NULL) {
dev_err(&dev->dev, "No memory for MSI irqhost\n");
- of_node_put(dev->node);
err = -ENOMEM;
goto error_out;
}
diff --git a/arch/powerpc/sysdev/fsl_msi.h b/arch/powerpc/sysdev/fsl_msi.h
index a653468..331c7e7 100644
--- a/arch/powerpc/sysdev/fsl_msi.h
+++ b/arch/powerpc/sysdev/fsl_msi.h
@@ -13,6 +13,8 @@
#ifndef _POWERPC_SYSDEV_FSL_MSI_H
#define _POWERPC_SYSDEV_FSL_MSI_H
+#include <asm/msi_bitmap.h>
+
#define NR_MSI_REG 8
#define IRQS_PER_MSI_REG 32
#define NR_MSI_IRQS (NR_MSI_REG * IRQS_PER_MSI_REG)
@@ -22,9 +24,6 @@
#define FSL_PIC_IP_IPIC 0x00000002
struct fsl_msi {
- /* Device node of the MSI interrupt*/
- struct device_node *of_node;
-
struct irq_host *irqhost;
unsigned long cascade_irq;
@@ -34,8 +33,7 @@
void __iomem *msi_regs;
u32 feature;
- unsigned long *fsl_msi_bitmap;
- spinlock_t bitmap_lock;
+ struct msi_bitmap bitmap;
};
#endif /* _POWERPC_SYSDEV_FSL_MSI_H */
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index 61e6d77..5b264eb 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -1,7 +1,7 @@
/*
- * MPC85xx/86xx PCI/PCIE support routing.
+ * MPC83xx/85xx/86xx PCI/PCIE support routing.
*
- * Copyright 2007 Freescale Semiconductor, Inc
+ * Copyright 2007,2008 Freescale Semiconductor, Inc
*
* Initial author: Xianghua Xiao <x.xiao@freescale.com>
* Recode: ZHANG WEI <wei.zhang@freescale.com>
@@ -251,20 +251,47 @@
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8610, quirk_fsl_pcie_header);
#endif /* CONFIG_PPC_85xx || CONFIG_PPC_86xx */
-#if defined(CONFIG_PPC_83xx)
+#if defined(CONFIG_PPC_83xx) || defined(CONFIG_PPC_MPC512x)
int __init mpc83xx_add_bridge(struct device_node *dev)
{
int len;
struct pci_controller *hose;
- struct resource rsrc;
+ struct resource rsrc_reg;
+ struct resource rsrc_cfg;
const int *bus_range;
- int primary = 1, has_address = 0;
- phys_addr_t immr = get_immrbase();
+ int primary;
pr_debug("Adding PCI host bridge %s\n", dev->full_name);
/* Fetch host bridge registers address */
- has_address = (of_address_to_resource(dev, 0, &rsrc) == 0);
+ if (of_address_to_resource(dev, 0, &rsrc_reg)) {
+ printk(KERN_WARNING "Can't get pci register base!\n");
+ return -ENOMEM;
+ }
+
+ memset(&rsrc_cfg, 0, sizeof(rsrc_cfg));
+
+ if (of_address_to_resource(dev, 1, &rsrc_cfg)) {
+ printk(KERN_WARNING
+ "No pci config register base in dev tree, "
+ "using default\n");
+ /*
+ * MPC83xx supports up to two host controllers
+ * one at 0x8500 has config space registers at 0x8300
+ * one at 0x8600 has config space registers at 0x8380
+ */
+ if ((rsrc_reg.start & 0xfffff) == 0x8500)
+ rsrc_cfg.start = (rsrc_reg.start & 0xfff00000) + 0x8300;
+ else if ((rsrc_reg.start & 0xfffff) == 0x8600)
+ rsrc_cfg.start = (rsrc_reg.start & 0xfff00000) + 0x8380;
+ }
+ /*
+ * Controller at offset 0x8500 is primary
+ */
+ if ((rsrc_reg.start & 0xfffff) == 0x8500)
+ primary = 1;
+ else
+ primary = 0;
/* Get bus range if any */
bus_range = of_get_property(dev, "bus-range", &len);
@@ -281,22 +308,11 @@
hose->first_busno = bus_range ? bus_range[0] : 0;
hose->last_busno = bus_range ? bus_range[1] : 0xff;
- /* MPC83xx supports up to two host controllers one at 0x8500 from immrbar
- * the other at 0x8600, we consider the 0x8500 the primary controller
- */
- /* PCI 1 */
- if ((rsrc.start & 0xfffff) == 0x8500) {
- setup_indirect_pci(hose, immr + 0x8300, immr + 0x8304, 0);
- }
- /* PCI 2 */
- if ((rsrc.start & 0xfffff) == 0x8600) {
- setup_indirect_pci(hose, immr + 0x8380, immr + 0x8384, 0);
- primary = 0;
- }
+ setup_indirect_pci(hose, rsrc_cfg.start, rsrc_cfg.start + 4, 0);
- printk(KERN_INFO "Found MPC83xx PCI host bridge at 0x%016llx. "
+ printk(KERN_INFO "Found FSL PCI host bridge at 0x%016llx. "
"Firmware bus number: %d->%d\n",
- (unsigned long long)rsrc.start, hose->first_busno,
+ (unsigned long long)rsrc_reg.start, hose->first_busno,
hose->last_busno);
pr_debug(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n",
diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
index 214388e..01b884b 100644
--- a/arch/powerpc/sysdev/fsl_soc.c
+++ b/arch/powerpc/sysdev/fsl_soc.c
@@ -412,53 +412,6 @@
arch_initcall(gfar_of_init);
-
-#ifdef CONFIG_PPC_83xx
-static int __init mpc83xx_wdt_init(void)
-{
- struct resource r;
- struct device_node *np;
- struct platform_device *dev;
- u32 freq = fsl_get_sys_freq();
- int ret;
-
- np = of_find_compatible_node(NULL, "watchdog", "mpc83xx_wdt");
-
- if (!np) {
- ret = -ENODEV;
- goto nodev;
- }
-
- memset(&r, 0, sizeof(r));
-
- ret = of_address_to_resource(np, 0, &r);
- if (ret)
- goto err;
-
- dev = platform_device_register_simple("mpc83xx_wdt", 0, &r, 1);
- if (IS_ERR(dev)) {
- ret = PTR_ERR(dev);
- goto err;
- }
-
- ret = platform_device_add_data(dev, &freq, sizeof(freq));
- if (ret)
- goto unreg;
-
- of_node_put(np);
- return 0;
-
-unreg:
- platform_device_unregister(dev);
-err:
- of_node_put(np);
-nodev:
- return ret;
-}
-
-arch_initcall(mpc83xx_wdt_init);
-#endif
-
static enum fsl_usb2_phy_modes determine_usb_phy(const char *phy_type)
{
if (!phy_type)
@@ -767,42 +720,6 @@
#endif
#if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
-struct platform_diu_data_ops diu_ops = {
- .diu_size = 1280 * 1024 * 4, /* default one 1280x1024 buffer */
-};
+struct platform_diu_data_ops diu_ops;
EXPORT_SYMBOL(diu_ops);
-
-int __init preallocate_diu_videomemory(void)
-{
- pr_debug("diu_size=%lu\n", diu_ops.diu_size);
-
- diu_ops.diu_mem = __alloc_bootmem(diu_ops.diu_size, 8, 0);
- if (!diu_ops.diu_mem) {
- printk(KERN_ERR "fsl-diu: cannot allocate %lu bytes\n",
- diu_ops.diu_size);
- return -ENOMEM;
- }
-
- pr_debug("diu_mem=%p\n", diu_ops.diu_mem);
-
- rh_init(&diu_ops.diu_rh_info, 4096, ARRAY_SIZE(diu_ops.diu_rh_block),
- diu_ops.diu_rh_block);
- return rh_attach_region(&diu_ops.diu_rh_info,
- (unsigned long) diu_ops.diu_mem,
- diu_ops.diu_size);
-}
-
-static int __init early_parse_diufb(char *p)
-{
- if (!p)
- return 1;
-
- diu_ops.diu_size = _ALIGN_UP(memparse(p, &p), 8);
-
- pr_debug("diu_size=%lu\n", diu_ops.diu_size);
-
- return 0;
-}
-early_param("diufb", early_parse_diufb);
-
#endif
diff --git a/arch/powerpc/sysdev/fsl_soc.h b/arch/powerpc/sysdev/fsl_soc.h
index 0242998..60f7f22 100644
--- a/arch/powerpc/sysdev/fsl_soc.h
+++ b/arch/powerpc/sysdev/fsl_soc.h
@@ -20,14 +20,7 @@
extern void fsl_rstcr_restart(char *cmd);
#if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
-#include <linux/bootmem.h>
-#include <asm/rheap.h>
struct platform_diu_data_ops {
- rh_block_t diu_rh_block[16];
- rh_info_t diu_rh_info;
- unsigned long diu_size;
- void *diu_mem;
-
unsigned int (*get_pixel_format) (unsigned int bits_per_pixel,
int monitor_port);
void (*set_gamma_table) (int monitor_port, char *gamma_table_base);
@@ -38,7 +31,6 @@
};
extern struct platform_diu_data_ops diu_ops;
-int __init preallocate_diu_videomemory(void);
#endif
#endif
diff --git a/arch/powerpc/sysdev/mpc8xxx_gpio.c b/arch/powerpc/sysdev/mpc8xxx_gpio.c
new file mode 100644
index 0000000..103eace
--- /dev/null
+++ b/arch/powerpc/sysdev/mpc8xxx_gpio.c
@@ -0,0 +1,171 @@
+/*
+ * GPIOs on MPC8349/8572/8610 and compatible
+ *
+ * Copyright (C) 2008 Peter Korsgaard <jacmet@sunsite.dk>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/gpio.h>
+
+#define MPC8XXX_GPIO_PINS 32
+
+#define GPIO_DIR 0x00
+#define GPIO_ODR 0x04
+#define GPIO_DAT 0x08
+#define GPIO_IER 0x0c
+#define GPIO_IMR 0x10
+#define GPIO_ICR 0x14
+
+struct mpc8xxx_gpio_chip {
+ struct of_mm_gpio_chip mm_gc;
+ spinlock_t lock;
+
+ /*
+ * shadowed data register to be able to clear/set output pins in
+ * open drain mode safely
+ */
+ u32 data;
+};
+
+static inline u32 mpc8xxx_gpio2mask(unsigned int gpio)
+{
+ return 1u << (MPC8XXX_GPIO_PINS - 1 - gpio);
+}
+
+static inline struct mpc8xxx_gpio_chip *
+to_mpc8xxx_gpio_chip(struct of_mm_gpio_chip *mm)
+{
+ return container_of(mm, struct mpc8xxx_gpio_chip, mm_gc);
+}
+
+static void mpc8xxx_gpio_save_regs(struct of_mm_gpio_chip *mm)
+{
+ struct mpc8xxx_gpio_chip *mpc8xxx_gc = to_mpc8xxx_gpio_chip(mm);
+
+ mpc8xxx_gc->data = in_be32(mm->regs + GPIO_DAT);
+}
+
+static int mpc8xxx_gpio_get(struct gpio_chip *gc, unsigned int gpio)
+{
+ struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc);
+
+ return in_be32(mm->regs + GPIO_DAT) & mpc8xxx_gpio2mask(gpio);
+}
+
+static void mpc8xxx_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+ struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc);
+ struct mpc8xxx_gpio_chip *mpc8xxx_gc = to_mpc8xxx_gpio_chip(mm);
+ unsigned long flags;
+
+ spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
+
+ if (val)
+ mpc8xxx_gc->data |= mpc8xxx_gpio2mask(gpio);
+ else
+ mpc8xxx_gc->data &= ~mpc8xxx_gpio2mask(gpio);
+
+ out_be32(mm->regs + GPIO_DAT, mpc8xxx_gc->data);
+
+ spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
+}
+
+static int mpc8xxx_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
+{
+ struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc);
+ struct mpc8xxx_gpio_chip *mpc8xxx_gc = to_mpc8xxx_gpio_chip(mm);
+ unsigned long flags;
+
+ spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
+
+ clrbits32(mm->regs + GPIO_DIR, mpc8xxx_gpio2mask(gpio));
+
+ spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
+
+ return 0;
+}
+
+static int mpc8xxx_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+ struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc);
+ struct mpc8xxx_gpio_chip *mpc8xxx_gc = to_mpc8xxx_gpio_chip(mm);
+ unsigned long flags;
+
+ mpc8xxx_gpio_set(gc, gpio, val);
+
+ spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
+
+ setbits32(mm->regs + GPIO_DIR, mpc8xxx_gpio2mask(gpio));
+
+ spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
+
+ return 0;
+}
+
+static void __init mpc8xxx_add_controller(struct device_node *np)
+{
+ struct mpc8xxx_gpio_chip *mpc8xxx_gc;
+ struct of_mm_gpio_chip *mm_gc;
+ struct of_gpio_chip *of_gc;
+ struct gpio_chip *gc;
+ int ret;
+
+ mpc8xxx_gc = kzalloc(sizeof(*mpc8xxx_gc), GFP_KERNEL);
+ if (!mpc8xxx_gc) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ spin_lock_init(&mpc8xxx_gc->lock);
+
+ mm_gc = &mpc8xxx_gc->mm_gc;
+ of_gc = &mm_gc->of_gc;
+ gc = &of_gc->gc;
+
+ mm_gc->save_regs = mpc8xxx_gpio_save_regs;
+ of_gc->gpio_cells = 2;
+ gc->ngpio = MPC8XXX_GPIO_PINS;
+ gc->direction_input = mpc8xxx_gpio_dir_in;
+ gc->direction_output = mpc8xxx_gpio_dir_out;
+ gc->get = mpc8xxx_gpio_get;
+ gc->set = mpc8xxx_gpio_set;
+
+ ret = of_mm_gpiochip_add(np, mm_gc);
+ if (ret)
+ goto err;
+
+ return;
+
+err:
+ pr_err("%s: registration failed with status %d\n",
+ np->full_name, ret);
+ kfree(mpc8xxx_gc);
+
+ return;
+}
+
+static int __init mpc8xxx_add_gpiochips(void)
+{
+ struct device_node *np;
+
+ for_each_compatible_node(np, NULL, "fsl,mpc8349-gpio")
+ mpc8xxx_add_controller(np);
+
+ for_each_compatible_node(np, NULL, "fsl,mpc8572-gpio")
+ mpc8xxx_add_controller(np);
+
+ for_each_compatible_node(np, NULL, "fsl,mpc8610-gpio")
+ mpc8xxx_add_controller(np);
+
+ return 0;
+}
+arch_initcall(mpc8xxx_add_gpiochips);
diff --git a/arch/powerpc/sysdev/mpic.h b/arch/powerpc/sysdev/mpic.h
index fbf8a26..6209c62 100644
--- a/arch/powerpc/sysdev/mpic.h
+++ b/arch/powerpc/sysdev/mpic.h
@@ -14,8 +14,6 @@
#ifdef CONFIG_PCI_MSI
extern void mpic_msi_reserve_hwirq(struct mpic *mpic, irq_hw_number_t hwirq);
extern int mpic_msi_init_allocator(struct mpic *mpic);
-extern irq_hw_number_t mpic_msi_alloc_hwirqs(struct mpic *mpic, int num);
-extern void mpic_msi_free_hwirqs(struct mpic *mpic, int offset, int num);
extern int mpic_u3msi_init(struct mpic *mpic);
extern int mpic_pasemi_msi_init(struct mpic *mpic);
#else
diff --git a/arch/powerpc/sysdev/mpic_msi.c b/arch/powerpc/sysdev/mpic_msi.c
index de3e5e8..1d44eee 100644
--- a/arch/powerpc/sysdev/mpic_msi.c
+++ b/arch/powerpc/sysdev/mpic_msi.c
@@ -15,59 +15,17 @@
#include <asm/prom.h>
#include <asm/hw_irq.h>
#include <asm/ppc-pci.h>
+#include <asm/msi_bitmap.h>
#include <sysdev/mpic.h>
-static void __mpic_msi_reserve_hwirq(struct mpic *mpic, irq_hw_number_t hwirq)
-{
- pr_debug("mpic: reserving hwirq 0x%lx\n", hwirq);
- bitmap_allocate_region(mpic->hwirq_bitmap, hwirq, 0);
-}
-
void mpic_msi_reserve_hwirq(struct mpic *mpic, irq_hw_number_t hwirq)
{
- unsigned long flags;
-
/* The mpic calls this even when there is no allocator setup */
- if (!mpic->hwirq_bitmap)
+ if (!mpic->msi_bitmap.bitmap)
return;
- spin_lock_irqsave(&mpic->bitmap_lock, flags);
- __mpic_msi_reserve_hwirq(mpic, hwirq);
- spin_unlock_irqrestore(&mpic->bitmap_lock, flags);
-}
-
-irq_hw_number_t mpic_msi_alloc_hwirqs(struct mpic *mpic, int num)
-{
- unsigned long flags;
- int offset, order = get_count_order(num);
-
- spin_lock_irqsave(&mpic->bitmap_lock, flags);
- /*
- * This is fast, but stricter than we need. We might want to add
- * a fallback routine which does a linear search with no alignment.
- */
- offset = bitmap_find_free_region(mpic->hwirq_bitmap, mpic->irq_count,
- order);
- spin_unlock_irqrestore(&mpic->bitmap_lock, flags);
-
- pr_debug("mpic: allocated 0x%x (2^%d) at offset 0x%x\n",
- num, order, offset);
-
- return offset;
-}
-
-void mpic_msi_free_hwirqs(struct mpic *mpic, int offset, int num)
-{
- unsigned long flags;
- int order = get_count_order(num);
-
- pr_debug("mpic: freeing 0x%x (2^%d) at offset 0x%x\n",
- num, order, offset);
-
- spin_lock_irqsave(&mpic->bitmap_lock, flags);
- bitmap_release_region(mpic->hwirq_bitmap, offset, order);
- spin_unlock_irqrestore(&mpic->bitmap_lock, flags);
+ msi_bitmap_reserve_hwirq(&mpic->msi_bitmap, hwirq);
}
#ifdef CONFIG_MPIC_U3_HT_IRQS
@@ -83,13 +41,13 @@
/* Reserve source numbers we know are reserved in the HW */
for (i = 0; i < 8; i++)
- __mpic_msi_reserve_hwirq(mpic, i);
+ msi_bitmap_reserve_hwirq(&mpic->msi_bitmap, i);
for (i = 42; i < 46; i++)
- __mpic_msi_reserve_hwirq(mpic, i);
+ msi_bitmap_reserve_hwirq(&mpic->msi_bitmap, i);
for (i = 100; i < 105; i++)
- __mpic_msi_reserve_hwirq(mpic, i);
+ msi_bitmap_reserve_hwirq(&mpic->msi_bitmap, i);
np = NULL;
while ((np = of_find_all_nodes(np))) {
@@ -99,7 +57,7 @@
while (of_irq_map_one(np, index++, &oirq) == 0) {
ops->xlate(mpic->irqhost, NULL, oirq.specifier,
oirq.size, &hwirq, &flags);
- __mpic_msi_reserve_hwirq(mpic, hwirq);
+ msi_bitmap_reserve_hwirq(&mpic->msi_bitmap, hwirq);
}
}
@@ -112,70 +70,25 @@
}
#endif
-static int mpic_msi_reserve_dt_hwirqs(struct mpic *mpic)
-{
- int i, len;
- const u32 *p;
-
- p = of_get_property(mpic->irqhost->of_node,
- "msi-available-ranges", &len);
- if (!p) {
- pr_debug("mpic: no msi-available-ranges property found on %s\n",
- mpic->irqhost->of_node->full_name);
- return -ENODEV;
- }
-
- if (len % 8 != 0) {
- printk(KERN_WARNING "mpic: Malformed msi-available-ranges "
- "property on %s\n", mpic->irqhost->of_node->full_name);
- return -EINVAL;
- }
-
- bitmap_allocate_region(mpic->hwirq_bitmap, 0,
- get_count_order(mpic->irq_count));
-
- /* Format is: (<u32 start> <u32 count>)+ */
- len /= sizeof(u32);
- for (i = 0; i < len / 2; i++, p += 2)
- mpic_msi_free_hwirqs(mpic, *p, *(p + 1));
-
- return 0;
-}
-
int mpic_msi_init_allocator(struct mpic *mpic)
{
- int rc, size;
+ int rc;
- BUG_ON(mpic->hwirq_bitmap);
- spin_lock_init(&mpic->bitmap_lock);
+ rc = msi_bitmap_alloc(&mpic->msi_bitmap, mpic->irq_count,
+ mpic->irqhost->of_node);
+ if (rc)
+ return rc;
- size = BITS_TO_LONGS(mpic->irq_count) * sizeof(long);
- pr_debug("mpic: allocator bitmap size is 0x%x bytes\n", size);
-
- mpic->hwirq_bitmap = alloc_maybe_bootmem(size, GFP_KERNEL);
-
- if (!mpic->hwirq_bitmap) {
- pr_debug("mpic: ENOMEM allocating allocator bitmap!\n");
- return -ENOMEM;
- }
-
- memset(mpic->hwirq_bitmap, 0, size);
-
- rc = mpic_msi_reserve_dt_hwirqs(mpic);
- if (rc) {
+ rc = msi_bitmap_reserve_dt_hwirqs(&mpic->msi_bitmap);
+ if (rc > 0) {
if (mpic->flags & MPIC_U3_HT_IRQS)
rc = mpic_msi_reserve_u3_hwirqs(mpic);
- if (rc)
- goto out_free;
+ if (rc) {
+ msi_bitmap_free(&mpic->msi_bitmap);
+ return rc;
+ }
}
return 0;
-
- out_free:
- if (mem_init_done)
- kfree(mpic->hwirq_bitmap);
-
- mpic->hwirq_bitmap = NULL;
- return rc;
}
diff --git a/arch/powerpc/sysdev/mpic_pasemi_msi.c b/arch/powerpc/sysdev/mpic_pasemi_msi.c
index 68aff60..656cb77 100644
--- a/arch/powerpc/sysdev/mpic_pasemi_msi.c
+++ b/arch/powerpc/sysdev/mpic_pasemi_msi.c
@@ -22,6 +22,7 @@
#include <asm/prom.h>
#include <asm/hw_irq.h>
#include <asm/ppc-pci.h>
+#include <asm/msi_bitmap.h>
#include "mpic.h"
@@ -81,8 +82,8 @@
continue;
set_irq_msi(entry->irq, NULL);
- mpic_msi_free_hwirqs(msi_mpic, virq_to_hw(entry->irq),
- ALLOC_CHUNK);
+ msi_bitmap_free_hwirqs(&msi_mpic->msi_bitmap,
+ virq_to_hw(entry->irq), ALLOC_CHUNK);
irq_dispose_mapping(entry->irq);
}
@@ -91,11 +92,10 @@
static int pasemi_msi_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
{
- irq_hw_number_t hwirq;
unsigned int virq;
struct msi_desc *entry;
struct msi_msg msg;
- int ret;
+ int hwirq;
pr_debug("pasemi_msi_setup_msi_irqs, pdev %p nvec %d type %d\n",
pdev, nvec, type);
@@ -109,17 +109,19 @@
* few MSIs for someone, but restrictions will apply to how the
* sources can be changed independently.
*/
- ret = mpic_msi_alloc_hwirqs(msi_mpic, ALLOC_CHUNK);
- hwirq = ret;
- if (ret < 0) {
+ hwirq = msi_bitmap_alloc_hwirqs(&msi_mpic->msi_bitmap,
+ ALLOC_CHUNK);
+ if (hwirq < 0) {
pr_debug("pasemi_msi: failed allocating hwirq\n");
return hwirq;
}
virq = irq_create_mapping(msi_mpic->irqhost, hwirq);
if (virq == NO_IRQ) {
- pr_debug("pasemi_msi: failed mapping hwirq 0x%lx\n", hwirq);
- mpic_msi_free_hwirqs(msi_mpic, hwirq, ALLOC_CHUNK);
+ pr_debug("pasemi_msi: failed mapping hwirq 0x%x\n",
+ hwirq);
+ msi_bitmap_free_hwirqs(&msi_mpic->msi_bitmap, hwirq,
+ ALLOC_CHUNK);
return -ENOSPC;
}
@@ -133,8 +135,8 @@
set_irq_chip(virq, &mpic_pasemi_msi_chip);
set_irq_type(virq, IRQ_TYPE_EDGE_RISING);
- pr_debug("pasemi_msi: allocated virq 0x%x (hw 0x%lx) addr 0x%x\n",
- virq, hwirq, msg.address_lo);
+ pr_debug("pasemi_msi: allocated virq 0x%x (hw 0x%x) " \
+ "addr 0x%x\n", virq, hwirq, msg.address_lo);
/* Likewise, the device writes [0...511] into the target
* register to generate MSI [512...1023]
diff --git a/arch/powerpc/sysdev/mpic_u3msi.c b/arch/powerpc/sysdev/mpic_u3msi.c
index 6e2f868..0a8f5a9 100644
--- a/arch/powerpc/sysdev/mpic_u3msi.c
+++ b/arch/powerpc/sysdev/mpic_u3msi.c
@@ -16,6 +16,7 @@
#include <asm/prom.h>
#include <asm/hw_irq.h>
#include <asm/ppc-pci.h>
+#include <asm/msi_bitmap.h>
#include "mpic.h"
@@ -101,7 +102,8 @@
continue;
set_irq_msi(entry->irq, NULL);
- mpic_msi_free_hwirqs(msi_mpic, virq_to_hw(entry->irq), 1);
+ msi_bitmap_free_hwirqs(&msi_mpic->msi_bitmap,
+ virq_to_hw(entry->irq), 1);
irq_dispose_mapping(entry->irq);
}
@@ -110,29 +112,27 @@
static int u3msi_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
{
- irq_hw_number_t hwirq;
unsigned int virq;
struct msi_desc *entry;
struct msi_msg msg;
u64 addr;
- int ret;
+ int hwirq;
addr = find_ht_magic_addr(pdev);
msg.address_lo = addr & 0xFFFFFFFF;
msg.address_hi = addr >> 32;
list_for_each_entry(entry, &pdev->msi_list, list) {
- ret = mpic_msi_alloc_hwirqs(msi_mpic, 1);
- if (ret < 0) {
+ hwirq = msi_bitmap_alloc_hwirqs(&msi_mpic->msi_bitmap, 1);
+ if (hwirq < 0) {
pr_debug("u3msi: failed allocating hwirq\n");
- return ret;
+ return hwirq;
}
- hwirq = ret;
virq = irq_create_mapping(msi_mpic->irqhost, hwirq);
if (virq == NO_IRQ) {
- pr_debug("u3msi: failed mapping hwirq 0x%lx\n", hwirq);
- mpic_msi_free_hwirqs(msi_mpic, hwirq, 1);
+ pr_debug("u3msi: failed mapping hwirq 0x%x\n", hwirq);
+ msi_bitmap_free_hwirqs(&msi_mpic->msi_bitmap, hwirq, 1);
return -ENOSPC;
}
@@ -140,8 +140,8 @@
set_irq_chip(virq, &mpic_u3msi_chip);
set_irq_type(virq, IRQ_TYPE_EDGE_RISING);
- pr_debug("u3msi: allocated virq 0x%x (hw 0x%lx) addr 0x%lx\n",
- virq, hwirq, addr);
+ pr_debug("u3msi: allocated virq 0x%x (hw 0x%x) addr 0x%lx\n",
+ virq, hwirq, (unsigned long)addr);
msg.data = hwirq;
write_msi_msg(virq, &msg);
diff --git a/arch/powerpc/sysdev/msi_bitmap.c b/arch/powerpc/sysdev/msi_bitmap.c
new file mode 100644
index 0000000..f84217b
--- /dev/null
+++ b/arch/powerpc/sysdev/msi_bitmap.c
@@ -0,0 +1,247 @@
+/*
+ * Copyright 2006-2008, Michael Ellerman, IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/bitmap.h>
+#include <asm/msi_bitmap.h>
+
+int msi_bitmap_alloc_hwirqs(struct msi_bitmap *bmp, int num)
+{
+ unsigned long flags;
+ int offset, order = get_count_order(num);
+
+ spin_lock_irqsave(&bmp->lock, flags);
+ /*
+ * This is fast, but stricter than we need. We might want to add
+ * a fallback routine which does a linear search with no alignment.
+ */
+ offset = bitmap_find_free_region(bmp->bitmap, bmp->irq_count, order);
+ spin_unlock_irqrestore(&bmp->lock, flags);
+
+ pr_debug("msi_bitmap: allocated 0x%x (2^%d) at offset 0x%x\n",
+ num, order, offset);
+
+ return offset;
+}
+
+void msi_bitmap_free_hwirqs(struct msi_bitmap *bmp, unsigned int offset,
+ unsigned int num)
+{
+ unsigned long flags;
+ int order = get_count_order(num);
+
+ pr_debug("msi_bitmap: freeing 0x%x (2^%d) at offset 0x%x\n",
+ num, order, offset);
+
+ spin_lock_irqsave(&bmp->lock, flags);
+ bitmap_release_region(bmp->bitmap, offset, order);
+ spin_unlock_irqrestore(&bmp->lock, flags);
+}
+
+void msi_bitmap_reserve_hwirq(struct msi_bitmap *bmp, unsigned int hwirq)
+{
+ unsigned long flags;
+
+ pr_debug("msi_bitmap: reserving hwirq 0x%x\n", hwirq);
+
+ spin_lock_irqsave(&bmp->lock, flags);
+ bitmap_allocate_region(bmp->bitmap, hwirq, 0);
+ spin_unlock_irqrestore(&bmp->lock, flags);
+}
+
+/**
+ * msi_bitmap_reserve_dt_hwirqs - Reserve irqs specified in the device tree.
+ * @bmp: pointer to the MSI bitmap.
+ *
+ * Looks in the device tree to see if there is a property specifying which
+ * irqs can be used for MSI. If found those irqs reserved in the device tree
+ * are reserved in the bitmap.
+ *
+ * Returns 0 for success, < 0 if there was an error, and > 0 if no property
+ * was found in the device tree.
+ **/
+int msi_bitmap_reserve_dt_hwirqs(struct msi_bitmap *bmp)
+{
+ int i, j, len;
+ const u32 *p;
+
+ if (!bmp->of_node)
+ return 1;
+
+ p = of_get_property(bmp->of_node, "msi-available-ranges", &len);
+ if (!p) {
+ pr_debug("msi_bitmap: no msi-available-ranges property " \
+ "found on %s\n", bmp->of_node->full_name);
+ return 1;
+ }
+
+ if (len % (2 * sizeof(u32)) != 0) {
+ printk(KERN_WARNING "msi_bitmap: Malformed msi-available-ranges"
+ " property on %s\n", bmp->of_node->full_name);
+ return -EINVAL;
+ }
+
+ bitmap_allocate_region(bmp->bitmap, 0, get_count_order(bmp->irq_count));
+
+ spin_lock(&bmp->lock);
+
+ /* Format is: (<u32 start> <u32 count>)+ */
+ len /= 2 * sizeof(u32);
+ for (i = 0; i < len; i++, p += 2) {
+ for (j = 0; j < *(p + 1); j++)
+ bitmap_release_region(bmp->bitmap, *p + j, 0);
+ }
+
+ spin_unlock(&bmp->lock);
+
+ return 0;
+}
+
+int msi_bitmap_alloc(struct msi_bitmap *bmp, unsigned int irq_count,
+ struct device_node *of_node)
+{
+ int size;
+
+ if (!irq_count)
+ return -EINVAL;
+
+ size = BITS_TO_LONGS(irq_count) * sizeof(long);
+ pr_debug("msi_bitmap: allocator bitmap size is 0x%x bytes\n", size);
+
+ bmp->bitmap = zalloc_maybe_bootmem(size, GFP_KERNEL);
+ if (!bmp->bitmap) {
+ pr_debug("msi_bitmap: ENOMEM allocating allocator bitmap!\n");
+ return -ENOMEM;
+ }
+
+ /* We zalloc'ed the bitmap, so all irqs are free by default */
+ spin_lock_init(&bmp->lock);
+ bmp->of_node = of_node_get(of_node);
+ bmp->irq_count = irq_count;
+
+ return 0;
+}
+
+void msi_bitmap_free(struct msi_bitmap *bmp)
+{
+ /* we can't free the bitmap we don't know if it's bootmem etc. */
+ of_node_put(bmp->of_node);
+ bmp->bitmap = NULL;
+}
+
+#ifdef CONFIG_MSI_BITMAP_SELFTEST
+
+#define check(x) \
+ if (!(x)) printk("msi_bitmap: test failed at line %d\n", __LINE__);
+
+void test_basics(void)
+{
+ struct msi_bitmap bmp;
+ int i, size = 512;
+
+ /* Can't allocate a bitmap of 0 irqs */
+ check(msi_bitmap_alloc(&bmp, 0, NULL) != 0);
+
+ /* of_node may be NULL */
+ check(0 == msi_bitmap_alloc(&bmp, size, NULL));
+
+ /* Should all be free by default */
+ check(0 == bitmap_find_free_region(bmp.bitmap, size,
+ get_count_order(size)));
+ bitmap_release_region(bmp.bitmap, 0, get_count_order(size));
+
+ /* With no node, there's no msi-available-ranges, so expect > 0 */
+ check(msi_bitmap_reserve_dt_hwirqs(&bmp) > 0);
+
+ /* Should all still be free */
+ check(0 == bitmap_find_free_region(bmp.bitmap, size,
+ get_count_order(size)));
+ bitmap_release_region(bmp.bitmap, 0, get_count_order(size));
+
+ /* Check we can fill it up and then no more */
+ for (i = 0; i < size; i++)
+ check(msi_bitmap_alloc_hwirqs(&bmp, 1) >= 0);
+
+ check(msi_bitmap_alloc_hwirqs(&bmp, 1) < 0);
+
+ /* Should all be allocated */
+ check(bitmap_find_free_region(bmp.bitmap, size, 0) < 0);
+
+ /* And if we free one we can then allocate another */
+ msi_bitmap_free_hwirqs(&bmp, size / 2, 1);
+ check(msi_bitmap_alloc_hwirqs(&bmp, 1) == size / 2);
+
+ msi_bitmap_free(&bmp);
+
+ /* Clients may check bitmap == NULL for "not-allocated" */
+ check(bmp.bitmap == NULL);
+
+ kfree(bmp.bitmap);
+}
+
+void test_of_node(void)
+{
+ u32 prop_data[] = { 10, 10, 25, 3, 40, 1, 100, 100, 200, 20 };
+ const char *expected_str = "0-9,20-24,28-39,41-99,220-255";
+ char *prop_name = "msi-available-ranges";
+ char *node_name = "/fakenode";
+ struct device_node of_node;
+ struct property prop;
+ struct msi_bitmap bmp;
+ int size = 256;
+ DECLARE_BITMAP(expected, size);
+
+ /* There should really be a struct device_node allocator */
+ memset(&of_node, 0, sizeof(of_node));
+ kref_init(&of_node.kref);
+ of_node.full_name = node_name;
+
+ check(0 == msi_bitmap_alloc(&bmp, size, &of_node));
+
+ /* No msi-available-ranges, so expect > 0 */
+ check(msi_bitmap_reserve_dt_hwirqs(&bmp) > 0);
+
+ /* Should all still be free */
+ check(0 == bitmap_find_free_region(bmp.bitmap, size,
+ get_count_order(size)));
+ bitmap_release_region(bmp.bitmap, 0, get_count_order(size));
+
+ /* Now create a fake msi-available-ranges property */
+
+ /* There should really .. oh whatever */
+ memset(&prop, 0, sizeof(prop));
+ prop.name = prop_name;
+ prop.value = &prop_data;
+ prop.length = sizeof(prop_data);
+
+ of_node.properties = ∝
+
+ /* msi-available-ranges, so expect == 0 */
+ check(msi_bitmap_reserve_dt_hwirqs(&bmp) == 0);
+
+ /* Check we got the expected result */
+ check(0 == bitmap_parselist(expected_str, expected, size));
+ check(bitmap_equal(expected, bmp.bitmap, size));
+
+ msi_bitmap_free(&bmp);
+ kfree(bmp.bitmap);
+}
+
+int msi_bitmap_selftest(void)
+{
+ printk(KERN_DEBUG "Running MSI bitmap self-tests ...\n");
+
+ test_basics();
+ test_of_node();
+
+ return 0;
+}
+late_initcall(msi_bitmap_selftest);
+#endif /* CONFIG_MSI_BITMAP_SELFTEST */
diff --git a/arch/powerpc/sysdev/ppc4xx_pci.c b/arch/powerpc/sysdev/ppc4xx_pci.c
index fb368df..9f6f73d 100644
--- a/arch/powerpc/sysdev/ppc4xx_pci.c
+++ b/arch/powerpc/sysdev/ppc4xx_pci.c
@@ -30,14 +30,12 @@
#include <asm/machdep.h>
#include <asm/dcr.h>
#include <asm/dcr-regs.h>
+#include <mm/mmu_decl.h>
#include "ppc4xx_pci.h"
static int dma_offset_set;
-/* Move that to a useable header */
-extern unsigned long total_memory;
-
#define U64_TO_U32_LOW(val) ((u32)((val) & 0x00000000ffffffffULL))
#define U64_TO_U32_HIGH(val) ((u32)((val) >> 32))
@@ -105,7 +103,8 @@
/* Default */
res->start = 0;
- res->end = size = 0x80000000;
+ size = 0x80000000;
+ res->end = size - 1;
res->flags = IORESOURCE_MEM | IORESOURCE_PREFETCH;
/* Get dma-ranges property */
@@ -167,13 +166,13 @@
*/
if (size < total_memory) {
printk(KERN_ERR "%s: dma-ranges too small "
- "(size=%llx total_memory=%lx)\n",
- hose->dn->full_name, size, total_memory);
+ "(size=%llx total_memory=%llx)\n",
+ hose->dn->full_name, size, (u64)total_memory);
return -ENXIO;
}
/* Check we are a power of 2 size and that base is a multiple of size*/
- if (!is_power_of_2(size) ||
+ if ((size & (size - 1)) != 0 ||
(res->start & (size - 1)) != 0) {
printk(KERN_ERR "%s: dma-ranges unaligned\n",
hose->dn->full_name);
@@ -277,9 +276,16 @@
const int *bus_range;
int primary = 0;
+ /* Check if device is enabled */
+ if (!of_device_is_available(np)) {
+ printk(KERN_INFO "%s: Port disabled via device-tree\n",
+ np->full_name);
+ return;
+ }
+
/* Fetch config space registers address */
if (of_address_to_resource(np, 0, &rsrc_cfg)) {
- printk(KERN_ERR "%s:Can't get PCI config register base !",
+ printk(KERN_ERR "%s: Can't get PCI config register base !",
np->full_name);
return;
}
@@ -810,7 +816,7 @@
switch (port->index) {
case 0:
mtdcri(SDR0, PESDR0_460EX_L0CDRCTL, 0x00003230);
- mtdcri(SDR0, PESDR0_460EX_L0DRV, 0x00000136);
+ mtdcri(SDR0, PESDR0_460EX_L0DRV, 0x00000130);
mtdcri(SDR0, PESDR0_460EX_L0CLK, 0x00000006);
mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST,0x10000000);
@@ -821,10 +827,10 @@
mtdcri(SDR0, PESDR1_460EX_L1CDRCTL, 0x00003230);
mtdcri(SDR0, PESDR1_460EX_L2CDRCTL, 0x00003230);
mtdcri(SDR0, PESDR1_460EX_L3CDRCTL, 0x00003230);
- mtdcri(SDR0, PESDR1_460EX_L0DRV, 0x00000136);
- mtdcri(SDR0, PESDR1_460EX_L1DRV, 0x00000136);
- mtdcri(SDR0, PESDR1_460EX_L2DRV, 0x00000136);
- mtdcri(SDR0, PESDR1_460EX_L3DRV, 0x00000136);
+ mtdcri(SDR0, PESDR1_460EX_L0DRV, 0x00000130);
+ mtdcri(SDR0, PESDR1_460EX_L1DRV, 0x00000130);
+ mtdcri(SDR0, PESDR1_460EX_L2DRV, 0x00000130);
+ mtdcri(SDR0, PESDR1_460EX_L3DRV, 0x00000130);
mtdcri(SDR0, PESDR1_460EX_L0CLK, 0x00000006);
mtdcri(SDR0, PESDR1_460EX_L1CLK, 0x00000006);
mtdcri(SDR0, PESDR1_460EX_L2CLK, 0x00000006);
diff --git a/arch/powerpc/sysdev/qe_lib/Kconfig b/arch/powerpc/sysdev/qe_lib/Kconfig
index 1ce5464..76ffbc4 100644
--- a/arch/powerpc/sysdev/qe_lib/Kconfig
+++ b/arch/powerpc/sysdev/qe_lib/Kconfig
@@ -24,12 +24,3 @@
bool
help
QE USB Host Controller support
-
-config QE_GPIO
- bool "QE GPIO support"
- depends on QUICC_ENGINE
- select GENERIC_GPIO
- select ARCH_REQUIRE_GPIOLIB
- help
- Say Y here if you're going to use hardware that connects to the
- QE GPIOs.
diff --git a/drivers/ata/pata_of_platform.c b/drivers/ata/pata_of_platform.c
index 408da30..1f18ad9 100644
--- a/drivers/ata/pata_of_platform.c
+++ b/drivers/ata/pata_of_platform.c
@@ -52,7 +52,7 @@
ret = of_irq_to_resource(dn, 0, &irq_res);
if (ret == NO_IRQ)
- irq_res.start = irq_res.end = -1;
+ irq_res.start = irq_res.end = 0;
else
irq_res.flags = 0;
diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index cf64ddf..2cea27a 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -4172,7 +4172,7 @@
int i, unit, drive;
int err, dr;
-#if defined(CONFIG_PPC_MERGE)
+#if defined(CONFIG_PPC)
if (check_legacy_ioport(FDC1))
return -ENODEV;
#endif
diff --git a/drivers/block/viodasd.c b/drivers/block/viodasd.c
index f1c8feb..1730d29 100644
--- a/drivers/block/viodasd.c
+++ b/drivers/block/viodasd.c
@@ -249,7 +249,6 @@
struct HvLpEvent *hev;
struct scatterlist sg[VIOMAXBLOCKDMA];
int sgindex;
- int statindex;
struct viodasd_device *d;
unsigned long flags;
@@ -258,11 +257,9 @@
if (rq_data_dir(req) == READ) {
direction = DMA_FROM_DEVICE;
viocmd = viomajorsubtype_blockio | vioblockread;
- statindex = 0;
} else {
direction = DMA_TO_DEVICE;
viocmd = viomajorsubtype_blockio | vioblockwrite;
- statindex = 1;
}
d = req->rq_disk->private_data;
diff --git a/drivers/char/hvc_console.c b/drivers/char/hvc_console.c
index ec7aded..bf70450 100644
--- a/drivers/char/hvc_console.c
+++ b/drivers/char/hvc_console.c
@@ -367,13 +367,13 @@
spin_lock_irqsave(&hp->lock, flags);
if (--hp->count == 0) {
- if (hp->ops->notifier_del)
- hp->ops->notifier_del(hp, hp->data);
-
/* We are done with the tty pointer now. */
hp->tty = NULL;
spin_unlock_irqrestore(&hp->lock, flags);
+ if (hp->ops->notifier_del)
+ hp->ops->notifier_del(hp, hp->data);
+
/*
* Chain calls chars_in_buffer() and returns immediately if
* there is no buffered data otherwise sleeps on a wait queue
@@ -416,11 +416,11 @@
hp->n_outbuf = 0;
hp->tty = NULL;
+ spin_unlock_irqrestore(&hp->lock, flags);
+
if (hp->ops->notifier_del)
hp->ops->notifier_del(hp, hp->data);
- spin_unlock_irqrestore(&hp->lock, flags);
-
while(temp_open_count) {
--temp_open_count;
kref_put(&hp->kref, destroy_hvc_struct);
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index 8e8afb6..3123bf5 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -2695,7 +2695,7 @@
for (i = 0; ; i++) {
if (!ipmi_defaults[i].port)
break;
-#ifdef CONFIG_PPC_MERGE
+#ifdef CONFIG_PPC
if (check_legacy_ioport(ipmi_defaults[i].port))
continue;
#endif
diff --git a/drivers/hwmon/ams/ams.h b/drivers/hwmon/ams/ams.h
index a6221e5..221ef69 100644
--- a/drivers/hwmon/ams/ams.h
+++ b/drivers/hwmon/ams/ams.h
@@ -4,7 +4,7 @@
#include <linux/mutex.h>
#include <linux/spinlock.h>
#include <linux/types.h>
-#include <asm/of_device.h>
+#include <linux/of_device.h>
enum ams_irq {
AMS_IRQ_FREEFALL = 0x01,
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index 27443f0..a9a45fc 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -312,7 +312,6 @@
.name = "MPC adapter",
.id = I2C_HW_MPC107,
.algo = &mpc_algo,
- .class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
.timeout = 1,
};
diff --git a/drivers/i2c/busses/i2c-pca-isa.c b/drivers/i2c/busses/i2c-pca-isa.c
index a119784..28d8463 100644
--- a/drivers/i2c/busses/i2c-pca-isa.c
+++ b/drivers/i2c/busses/i2c-pca-isa.c
@@ -113,7 +113,7 @@
dev_info(dev, "i/o base %#08lx. irq %d\n", base, irq);
-#ifdef CONFIG_PPC_MERGE
+#ifdef CONFIG_PPC
if (check_legacy_ioport(base)) {
dev_err(dev, "I/O address %#08lx is not available\n", base);
goto out;
diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
index a95cb94..1735682 100644
--- a/drivers/i2c/chips/Kconfig
+++ b/drivers/i2c/chips/Kconfig
@@ -172,4 +172,15 @@
and other features that are often used in portable devices like
cell phones and PDAs.
+config MCU_MPC8349EMITX
+ tristate "MPC8349E-mITX MCU driver"
+ depends on I2C && PPC_83xx
+ select GENERIC_GPIO
+ select ARCH_REQUIRE_GPIOLIB
+ help
+ Say Y here to enable soft power-off functionality on the Freescale
+ boards with the MPC8349E-mITX-compatible MCU chips. This driver will
+ also register MCU GPIOs with the generic GPIO API, so you'll able
+ to use MCU pins as GPIOs.
+
endmenu
diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile
index 39e3e69..ca520fa 100644
--- a/drivers/i2c/chips/Makefile
+++ b/drivers/i2c/chips/Makefile
@@ -21,6 +21,7 @@
obj-$(CONFIG_TPS65010) += tps65010.o
obj-$(CONFIG_MENELAUS) += menelaus.o
obj-$(CONFIG_SENSORS_TSL2550) += tsl2550.o
+obj-$(CONFIG_MCU_MPC8349EMITX) += mcu_mpc8349emitx.o
ifeq ($(CONFIG_I2C_DEBUG_CHIP),y)
EXTRA_CFLAGS += -DDEBUG
diff --git a/drivers/i2c/chips/mcu_mpc8349emitx.c b/drivers/i2c/chips/mcu_mpc8349emitx.c
new file mode 100644
index 0000000..82a9bcb
--- /dev/null
+++ b/drivers/i2c/chips/mcu_mpc8349emitx.c
@@ -0,0 +1,209 @@
+/*
+ * Power Management and GPIO expander driver for MPC8349E-mITX-compatible MCU
+ *
+ * Copyright (c) 2008 MontaVista Software, Inc.
+ *
+ * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/mutex.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <asm/prom.h>
+#include <asm/machdep.h>
+
+/*
+ * I don't have specifications for the MCU firmware, I found this register
+ * and bits positions by the trial&error method.
+ */
+#define MCU_REG_CTRL 0x20
+#define MCU_CTRL_POFF 0x40
+
+#define MCU_NUM_GPIO 2
+
+struct mcu {
+ struct mutex lock;
+ struct device_node *np;
+ struct i2c_client *client;
+ struct of_gpio_chip of_gc;
+ u8 reg_ctrl;
+};
+
+static struct mcu *glob_mcu;
+
+static void mcu_power_off(void)
+{
+ struct mcu *mcu = glob_mcu;
+
+ pr_info("Sending power-off request to the MCU...\n");
+ mutex_lock(&mcu->lock);
+ i2c_smbus_write_byte_data(glob_mcu->client, MCU_REG_CTRL,
+ mcu->reg_ctrl | MCU_CTRL_POFF);
+ mutex_unlock(&mcu->lock);
+}
+
+static void mcu_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+ struct of_gpio_chip *of_gc = to_of_gpio_chip(gc);
+ struct mcu *mcu = container_of(of_gc, struct mcu, of_gc);
+ u8 bit = 1 << (4 + gpio);
+
+ mutex_lock(&mcu->lock);
+ if (val)
+ mcu->reg_ctrl &= ~bit;
+ else
+ mcu->reg_ctrl |= bit;
+
+ i2c_smbus_write_byte_data(mcu->client, MCU_REG_CTRL, mcu->reg_ctrl);
+ mutex_unlock(&mcu->lock);
+}
+
+static int mcu_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+ mcu_gpio_set(gc, gpio, val);
+ return 0;
+}
+
+static int mcu_gpiochip_add(struct mcu *mcu)
+{
+ struct device_node *np;
+ struct of_gpio_chip *of_gc = &mcu->of_gc;
+ struct gpio_chip *gc = &of_gc->gc;
+ int ret;
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,mcu-mpc8349emitx");
+ if (!np)
+ return -ENODEV;
+
+ gc->owner = THIS_MODULE;
+ gc->label = np->full_name;
+ gc->can_sleep = 1;
+ gc->ngpio = MCU_NUM_GPIO;
+ gc->base = -1;
+ gc->set = mcu_gpio_set;
+ gc->direction_output = mcu_gpio_dir_out;
+ of_gc->gpio_cells = 2;
+ of_gc->xlate = of_gpio_simple_xlate;
+
+ np->data = of_gc;
+ mcu->np = np;
+
+ /*
+ * We don't want to lose the node, its ->data and ->full_name...
+ * So, if succeeded, we don't put the node here.
+ */
+ ret = gpiochip_add(gc);
+ if (ret)
+ of_node_put(np);
+ return ret;
+}
+
+static int mcu_gpiochip_remove(struct mcu *mcu)
+{
+ int ret;
+
+ ret = gpiochip_remove(&mcu->of_gc.gc);
+ if (ret)
+ return ret;
+ of_node_put(mcu->np);
+
+ return 0;
+}
+
+static int __devinit mcu_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct mcu *mcu;
+ int ret;
+
+ mcu = kzalloc(sizeof(*mcu), GFP_KERNEL);
+ if (!mcu)
+ return -ENOMEM;
+
+ mutex_init(&mcu->lock);
+ mcu->client = client;
+ i2c_set_clientdata(client, mcu);
+
+ ret = i2c_smbus_read_byte_data(mcu->client, MCU_REG_CTRL);
+ if (ret < 0)
+ goto err;
+ mcu->reg_ctrl = ret;
+
+ ret = mcu_gpiochip_add(mcu);
+ if (ret)
+ goto err;
+
+ /* XXX: this is potentially racy, but there is no lock for ppc_md */
+ if (!ppc_md.power_off) {
+ glob_mcu = mcu;
+ ppc_md.power_off = mcu_power_off;
+ dev_info(&client->dev, "will provide power-off service\n");
+ }
+
+ return 0;
+err:
+ kfree(mcu);
+ return ret;
+}
+
+static int __devexit mcu_remove(struct i2c_client *client)
+{
+ struct mcu *mcu = i2c_get_clientdata(client);
+ int ret;
+
+ if (glob_mcu == mcu) {
+ ppc_md.power_off = NULL;
+ glob_mcu = NULL;
+ }
+
+ ret = mcu_gpiochip_remove(mcu);
+ if (ret)
+ return ret;
+ i2c_set_clientdata(client, NULL);
+ kfree(mcu);
+ return 0;
+}
+
+static const struct i2c_device_id mcu_ids[] = {
+ { "mcu-mpc8349emitx", },
+ {},
+};
+MODULE_DEVICE_TABLE(i2c, mcu_ids);
+
+static struct i2c_driver mcu_driver = {
+ .driver = {
+ .name = "mcu-mpc8349emitx",
+ .owner = THIS_MODULE,
+ },
+ .probe = mcu_probe,
+ .remove = __devexit_p(mcu_remove),
+ .id_table = mcu_ids,
+};
+
+static int __init mcu_init(void)
+{
+ return i2c_add_driver(&mcu_driver);
+}
+module_init(mcu_init);
+
+static void __exit mcu_exit(void)
+{
+ i2c_del_driver(&mcu_driver);
+}
+module_exit(mcu_exit);
+
+MODULE_DESCRIPTION("Power Management and GPIO expander driver for "
+ "MPC8349E-mITX-compatible MCU");
+MODULE_AUTHOR("Anton Vorontsov <avorontsov@ru.mvista.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/serio/i8042-io.h b/drivers/input/serio/i8042-io.h
index f451c73..847f4aa 100644
--- a/drivers/input/serio/i8042-io.h
+++ b/drivers/input/serio/i8042-io.h
@@ -67,7 +67,7 @@
* On some platforms touching the i8042 data register region can do really
* bad things. Because of this the region is always reserved on such boxes.
*/
-#if defined(CONFIG_PPC_MERGE)
+#if defined(CONFIG_PPC)
if (check_legacy_ioport(I8042_DATA_REG))
return -ENODEV;
#endif
diff --git a/drivers/net/ibm_newemac/Kconfig b/drivers/net/ibm_newemac/Kconfig
index bcec732..78a1628 100644
--- a/drivers/net/ibm_newemac/Kconfig
+++ b/drivers/net/ibm_newemac/Kconfig
@@ -62,3 +62,15 @@
config IBM_NEW_EMAC_EMAC4
bool
default n
+
+config IBM_NEW_EMAC_NO_FLOW_CTRL
+ bool
+ default n
+
+config IBM_NEW_EMAC_MAL_CLR_ICINTSTAT
+ bool
+ default n
+
+config IBM_NEW_EMAC_MAL_COMMON_ERR
+ bool
+ default n
diff --git a/drivers/net/ibm_newemac/core.c b/drivers/net/ibm_newemac/core.c
index 58dfd32..efcf21c 100644
--- a/drivers/net/ibm_newemac/core.c
+++ b/drivers/net/ibm_newemac/core.c
@@ -202,13 +202,15 @@
{
return phy_mode == PHY_MODE_GMII ||
phy_mode == PHY_MODE_RGMII ||
+ phy_mode == PHY_MODE_SGMII ||
phy_mode == PHY_MODE_TBI ||
phy_mode == PHY_MODE_RTBI;
}
static inline int emac_phy_gpcs(int phy_mode)
{
- return phy_mode == PHY_MODE_TBI ||
+ return phy_mode == PHY_MODE_SGMII ||
+ phy_mode == PHY_MODE_TBI ||
phy_mode == PHY_MODE_RTBI;
}
@@ -562,8 +564,9 @@
switch (dev->phy.speed) {
case SPEED_1000:
if (emac_phy_gpcs(dev->phy.mode)) {
- mr1 |= EMAC_MR1_MF_1000GPCS |
- EMAC_MR1_MF_IPPA(dev->phy.address);
+ mr1 |= EMAC_MR1_MF_1000GPCS | EMAC_MR1_MF_IPPA(
+ (dev->phy.gpcs_address != 0xffffffff) ?
+ dev->phy.gpcs_address : dev->phy.address);
/* Put some arbitrary OUI, Manuf & Rev IDs so we can
* identify this GPCS PHY later.
@@ -675,8 +678,12 @@
out_be32(&p->iser, r);
/* We need to take GPCS PHY out of isolate mode after EMAC reset */
- if (emac_phy_gpcs(dev->phy.mode))
- emac_mii_reset_phy(&dev->phy);
+ if (emac_phy_gpcs(dev->phy.mode)) {
+ if (dev->phy.gpcs_address != 0xffffffff)
+ emac_mii_reset_gpcs(&dev->phy);
+ else
+ emac_mii_reset_phy(&dev->phy);
+ }
return 0;
}
@@ -881,7 +888,9 @@
struct emac_instance *dev = netdev_priv(ndev);
int res;
- res = __emac_mdio_read(dev->mdio_instance ? dev->mdio_instance : dev,
+ res = __emac_mdio_read((dev->mdio_instance &&
+ dev->phy.gpcs_address != id) ?
+ dev->mdio_instance : dev,
(u8) id, (u8) reg);
return res;
}
@@ -890,7 +899,9 @@
{
struct emac_instance *dev = netdev_priv(ndev);
- __emac_mdio_write(dev->mdio_instance ? dev->mdio_instance : dev,
+ __emac_mdio_write((dev->mdio_instance &&
+ dev->phy.gpcs_address != id) ?
+ dev->mdio_instance : dev,
(u8) id, (u8) reg, (u16) val);
}
@@ -2382,7 +2393,11 @@
* XXX I probably should move these settings to the dev tree
*/
dev->phy.address = -1;
- dev->phy.features = SUPPORTED_100baseT_Full | SUPPORTED_MII;
+ dev->phy.features = SUPPORTED_MII;
+ if (emac_phy_supports_gige(dev->phy_mode))
+ dev->phy.features |= SUPPORTED_1000baseT_Full;
+ else
+ dev->phy.features |= SUPPORTED_100baseT_Full;
dev->phy.pause = 1;
return 0;
@@ -2421,7 +2436,9 @@
* Note that the busy_phy_map is currently global
* while it should probably be per-ASIC...
*/
- dev->phy.address = dev->cell_index;
+ dev->phy.gpcs_address = dev->gpcs_address;
+ if (dev->phy.gpcs_address == 0xffffffff)
+ dev->phy.address = dev->cell_index;
}
emac_configure(dev);
@@ -2531,6 +2548,8 @@
dev->phy_address = 0xffffffff;
if (emac_read_uint_prop(np, "phy-map", &dev->phy_map, 0))
dev->phy_map = 0xffffffff;
+ if (emac_read_uint_prop(np, "gpcs-address", &dev->gpcs_address, 0))
+ dev->gpcs_address = 0xffffffff;
if (emac_read_uint_prop(np->parent, "clock-frequency", &dev->opb_bus_freq, 1))
return -ENXIO;
if (emac_read_uint_prop(np, "tah-device", &dev->tah_ph, 0))
@@ -2585,6 +2604,8 @@
if (of_device_is_compatible(np, "ibm,emac-440ep") ||
of_device_is_compatible(np, "ibm,emac-440gr"))
dev->features |= EMAC_FTR_440EP_PHY_CLK_FIX;
+ if (of_device_is_compatible(np, "ibm,emac-405ez"))
+ dev->features |= EMAC_FTR_NO_FLOW_CONTROL_40x;
}
/* Fixup some feature bits based on the device tree */
@@ -2842,6 +2863,9 @@
ndev->dev_addr[0], ndev->dev_addr[1], ndev->dev_addr[2],
ndev->dev_addr[3], ndev->dev_addr[4], ndev->dev_addr[5]);
+ if (dev->phy_mode == PHY_MODE_SGMII)
+ printk(KERN_NOTICE "%s: in SGMII mode\n", ndev->name);
+
if (dev->phy.address >= 0)
printk("%s: found %s PHY (0x%02x)\n", ndev->name,
dev->phy.def->name, dev->phy.address);
diff --git a/drivers/net/ibm_newemac/core.h b/drivers/net/ibm_newemac/core.h
index 5ca70e5..18d56c6 100644
--- a/drivers/net/ibm_newemac/core.h
+++ b/drivers/net/ibm_newemac/core.h
@@ -190,6 +190,9 @@
struct delayed_work link_work;
int link_polling;
+ /* GPCS PHY infos */
+ u32 gpcs_address;
+
/* Shared MDIO if any */
u32 mdio_ph;
struct of_device *mdio_dev;
@@ -345,6 +348,9 @@
#ifdef CONFIG_IBM_NEW_EMAC_RGMII
EMAC_FTR_HAS_RGMII |
#endif
+#ifdef CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL
+ EMAC_FTR_NO_FLOW_CONTROL_40x |
+#endif
EMAC_FTR_460EX_PHY_CLK_FIX |
EMAC_FTR_440EP_PHY_CLK_FIX,
};
diff --git a/drivers/net/ibm_newemac/mal.c b/drivers/net/ibm_newemac/mal.c
index 10c267b..1839d3f 100644
--- a/drivers/net/ibm_newemac/mal.c
+++ b/drivers/net/ibm_newemac/mal.c
@@ -28,6 +28,7 @@
#include <linux/delay.h>
#include "core.h"
+#include <asm/dcr-regs.h>
static int mal_count;
@@ -279,6 +280,10 @@
mal_schedule_poll(mal);
set_mal_dcrn(mal, MAL_TXEOBISR, r);
+ if (mal_has_feature(mal, MAL_FTR_CLEAR_ICINTSTAT))
+ mtdcri(SDR0, DCRN_SDR_ICINTSTAT,
+ (mfdcri(SDR0, DCRN_SDR_ICINTSTAT) | ICINTSTAT_ICTX));
+
return IRQ_HANDLED;
}
@@ -293,6 +298,10 @@
mal_schedule_poll(mal);
set_mal_dcrn(mal, MAL_RXEOBISR, r);
+ if (mal_has_feature(mal, MAL_FTR_CLEAR_ICINTSTAT))
+ mtdcri(SDR0, DCRN_SDR_ICINTSTAT,
+ (mfdcri(SDR0, DCRN_SDR_ICINTSTAT) | ICINTSTAT_ICRX));
+
return IRQ_HANDLED;
}
@@ -336,6 +345,25 @@
return IRQ_HANDLED;
}
+static irqreturn_t mal_int(int irq, void *dev_instance)
+{
+ struct mal_instance *mal = dev_instance;
+ u32 esr = get_mal_dcrn(mal, MAL_ESR);
+
+ if (esr & MAL_ESR_EVB) {
+ /* descriptor error */
+ if (esr & MAL_ESR_DE) {
+ if (esr & MAL_ESR_CIDT)
+ return mal_rxde(irq, dev_instance);
+ else
+ return mal_txde(irq, dev_instance);
+ } else { /* SERR */
+ return mal_serr(irq, dev_instance);
+ }
+ }
+ return IRQ_HANDLED;
+}
+
void mal_poll_disable(struct mal_instance *mal, struct mal_commac *commac)
{
/* Spinlock-type semantics: only one caller disable poll at a time */
@@ -493,6 +521,8 @@
unsigned int dcr_base;
const u32 *prop;
u32 cfg;
+ unsigned long irqflags;
+ irq_handler_t hdlr_serr, hdlr_txde, hdlr_rxde;
mal = kzalloc(sizeof(struct mal_instance), GFP_KERNEL);
if (!mal) {
@@ -542,11 +572,21 @@
goto fail;
}
+ if (of_device_is_compatible(ofdev->node, "ibm,mcmal-405ez"))
+ mal->features |= (MAL_FTR_CLEAR_ICINTSTAT |
+ MAL_FTR_COMMON_ERR_INT);
+
mal->txeob_irq = irq_of_parse_and_map(ofdev->node, 0);
mal->rxeob_irq = irq_of_parse_and_map(ofdev->node, 1);
mal->serr_irq = irq_of_parse_and_map(ofdev->node, 2);
- mal->txde_irq = irq_of_parse_and_map(ofdev->node, 3);
- mal->rxde_irq = irq_of_parse_and_map(ofdev->node, 4);
+
+ if (mal_has_feature(mal, MAL_FTR_COMMON_ERR_INT)) {
+ mal->txde_irq = mal->rxde_irq = mal->serr_irq;
+ } else {
+ mal->txde_irq = irq_of_parse_and_map(ofdev->node, 3);
+ mal->rxde_irq = irq_of_parse_and_map(ofdev->node, 4);
+ }
+
if (mal->txeob_irq == NO_IRQ || mal->rxeob_irq == NO_IRQ ||
mal->serr_irq == NO_IRQ || mal->txde_irq == NO_IRQ ||
mal->rxde_irq == NO_IRQ) {
@@ -608,16 +648,26 @@
sizeof(struct mal_descriptor) *
mal_rx_bd_offset(mal, i));
- err = request_irq(mal->serr_irq, mal_serr, 0, "MAL SERR", mal);
+ if (mal_has_feature(mal, MAL_FTR_COMMON_ERR_INT)) {
+ irqflags = IRQF_SHARED;
+ hdlr_serr = hdlr_txde = hdlr_rxde = mal_int;
+ } else {
+ irqflags = 0;
+ hdlr_serr = mal_serr;
+ hdlr_txde = mal_txde;
+ hdlr_rxde = mal_rxde;
+ }
+
+ err = request_irq(mal->serr_irq, hdlr_serr, irqflags, "MAL SERR", mal);
if (err)
goto fail2;
- err = request_irq(mal->txde_irq, mal_txde, 0, "MAL TX DE", mal);
+ err = request_irq(mal->txde_irq, hdlr_txde, irqflags, "MAL TX DE", mal);
if (err)
goto fail3;
err = request_irq(mal->txeob_irq, mal_txeob, 0, "MAL TX EOB", mal);
if (err)
goto fail4;
- err = request_irq(mal->rxde_irq, mal_rxde, 0, "MAL RX DE", mal);
+ err = request_irq(mal->rxde_irq, hdlr_rxde, irqflags, "MAL RX DE", mal);
if (err)
goto fail5;
err = request_irq(mal->rxeob_irq, mal_rxeob, 0, "MAL RX EOB", mal);
diff --git a/drivers/net/ibm_newemac/mal.h b/drivers/net/ibm_newemac/mal.h
index 717dc38..2f0a873 100644
--- a/drivers/net/ibm_newemac/mal.h
+++ b/drivers/net/ibm_newemac/mal.h
@@ -213,6 +213,8 @@
struct of_device *ofdev;
int index;
spinlock_t lock;
+
+ unsigned int features;
};
static inline u32 get_mal_dcrn(struct mal_instance *mal, int reg)
@@ -225,6 +227,38 @@
dcr_write(mal->dcr_host, reg, val);
}
+/* Features of various MAL implementations */
+
+/* Set if you have interrupt coalescing and you have to clear the SDR
+ * register for TXEOB and RXEOB interrupts to work
+ */
+#define MAL_FTR_CLEAR_ICINTSTAT 0x00000001
+
+/* Set if your MAL has SERR, TXDE, and RXDE OR'd into a single UIC
+ * interrupt
+ */
+#define MAL_FTR_COMMON_ERR_INT 0x00000002
+
+enum {
+ MAL_FTRS_ALWAYS = 0,
+
+ MAL_FTRS_POSSIBLE =
+#ifdef CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT
+ MAL_FTR_CLEAR_ICINTSTAT |
+#endif
+#ifdef CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR
+ MAL_FTR_COMMON_ERR_INT |
+#endif
+ 0,
+};
+
+static inline int mal_has_feature(struct mal_instance *dev,
+ unsigned long feature)
+{
+ return (MAL_FTRS_ALWAYS & feature) ||
+ (MAL_FTRS_POSSIBLE & dev->features & feature);
+}
+
/* Register MAL devices */
int mal_init(void);
void mal_exit(void);
diff --git a/drivers/net/ibm_newemac/phy.c b/drivers/net/ibm_newemac/phy.c
index 9164abb..c40cd8df 100644
--- a/drivers/net/ibm_newemac/phy.c
+++ b/drivers/net/ibm_newemac/phy.c
@@ -38,6 +38,16 @@
phy->mdio_write(phy->dev, phy->address, reg, val);
}
+static inline int gpcs_phy_read(struct mii_phy *phy, int reg)
+{
+ return phy->mdio_read(phy->dev, phy->gpcs_address, reg);
+}
+
+static inline void gpcs_phy_write(struct mii_phy *phy, int reg, int val)
+{
+ phy->mdio_write(phy->dev, phy->gpcs_address, reg, val);
+}
+
int emac_mii_reset_phy(struct mii_phy *phy)
{
int val;
@@ -62,6 +72,37 @@
return limit <= 0;
}
+int emac_mii_reset_gpcs(struct mii_phy *phy)
+{
+ int val;
+ int limit = 10000;
+
+ val = gpcs_phy_read(phy, MII_BMCR);
+ val &= ~(BMCR_ISOLATE | BMCR_ANENABLE);
+ val |= BMCR_RESET;
+ gpcs_phy_write(phy, MII_BMCR, val);
+
+ udelay(300);
+
+ while (limit--) {
+ val = gpcs_phy_read(phy, MII_BMCR);
+ if (val >= 0 && (val & BMCR_RESET) == 0)
+ break;
+ udelay(10);
+ }
+ if ((val & BMCR_ISOLATE) && limit > 0)
+ gpcs_phy_write(phy, MII_BMCR, val & ~BMCR_ISOLATE);
+
+ if (limit > 0 && phy->mode == PHY_MODE_SGMII) {
+ /* Configure GPCS interface to recommended setting for SGMII */
+ gpcs_phy_write(phy, 0x04, 0x8120); /* AsymPause, FDX */
+ gpcs_phy_write(phy, 0x07, 0x2801); /* msg_pg, toggle */
+ gpcs_phy_write(phy, 0x00, 0x0140); /* 1Gbps, FDX */
+ }
+
+ return limit <= 0;
+}
+
static int genmii_setup_aneg(struct mii_phy *phy, u32 advertise)
{
int ctl, adv;
@@ -332,6 +373,33 @@
return 0;
}
+static int m88e1112_init(struct mii_phy *phy)
+{
+ /*
+ * Marvell 88E1112 PHY needs to have the SGMII MAC
+ * interace (page 2) properly configured to
+ * communicate with the 460EX/GT GPCS interface.
+ */
+
+ u16 reg_short;
+
+ pr_debug("%s: Marvell 88E1112 Ethernet\n", __func__);
+
+ /* Set access to Page 2 */
+ phy_write(phy, 0x16, 0x0002);
+
+ phy_write(phy, 0x00, 0x0040); /* 1Gbps */
+ reg_short = (u16)(phy_read(phy, 0x1a));
+ reg_short |= 0x8000; /* bypass Auto-Negotiation */
+ phy_write(phy, 0x1a, reg_short);
+ emac_mii_reset_phy(phy); /* reset MAC interface */
+
+ /* Reset access to Page 0 */
+ phy_write(phy, 0x16, 0x0000);
+
+ return 0;
+}
+
static int et1011c_init(struct mii_phy *phy)
{
u16 reg_short;
@@ -384,11 +452,27 @@
.ops = &m88e1111_phy_ops,
};
+static struct mii_phy_ops m88e1112_phy_ops = {
+ .init = m88e1112_init,
+ .setup_aneg = genmii_setup_aneg,
+ .setup_forced = genmii_setup_forced,
+ .poll_link = genmii_poll_link,
+ .read_link = genmii_read_link
+};
+
+static struct mii_phy_def m88e1112_phy_def = {
+ .phy_id = 0x01410C90,
+ .phy_id_mask = 0x0ffffff0,
+ .name = "Marvell 88E1112 Ethernet",
+ .ops = &m88e1112_phy_ops,
+};
+
static struct mii_phy_def *mii_phy_table[] = {
&et1011c_phy_def,
&cis8201_phy_def,
&bcm5248_phy_def,
&m88e1111_phy_def,
+ &m88e1112_phy_def,
&genmii_phy_def,
NULL
};
diff --git a/drivers/net/ibm_newemac/phy.h b/drivers/net/ibm_newemac/phy.h
index 1b65c81..5d2bf4c 100644
--- a/drivers/net/ibm_newemac/phy.h
+++ b/drivers/net/ibm_newemac/phy.h
@@ -57,6 +57,7 @@
or determined automaticaly */
int address; /* PHY address */
int mode; /* PHY mode */
+ int gpcs_address; /* GPCS PHY address */
/* 1: autoneg enabled, 0: disabled */
int autoneg;
@@ -81,5 +82,6 @@
*/
int emac_mii_phy_probe(struct mii_phy *phy, int address);
int emac_mii_reset_phy(struct mii_phy *phy);
+int emac_mii_reset_gpcs(struct mii_phy *phy);
#endif /* __IBM_NEWEMAC_PHY_H */
diff --git a/drivers/of/base.c b/drivers/of/base.c
index ad8ac1a..7c79e94 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -410,7 +410,7 @@
char *modalias;
};
static struct of_modalias_table of_modalias_table[] = {
- /* Empty for now; add entries as needed */
+ { "fsl,mcu-mpc8349emitx", "mcu-mpc8349emitx" },
};
/**
@@ -420,13 +420,12 @@
* @len: Length of modalias value
*
* Based on the value of the compatible property, this routine will determine
- * an appropriate modalias value for a particular device tree node. Three
- * separate methods are used to derive a modalias value.
+ * an appropriate modalias value for a particular device tree node. Two
+ * separate methods are attempted to derive a modalias value.
*
* First method is to lookup the compatible value in of_modalias_table.
- * Second is to look for a "linux,<modalias>" entry in the compatible list
- * and used that for modalias. Third is to strip off the manufacturer
- * prefix from the first compatible entry and use the remainder as modalias
+ * Second is to strip off the manufacturer prefix from the first
+ * compatible entry and use the remainder as modalias
*
* This routine returns 0 on success
*/
@@ -449,21 +448,7 @@
if (!compatible)
return -ENODEV;
- /* 2. search for linux,<modalias> entry */
- p = compatible;
- while (cplen > 0) {
- if (!strncmp(p, "linux,", 6)) {
- p += 6;
- strlcpy(modalias, p, len);
- return 0;
- }
-
- i = strlen(p) + 1;
- p += i;
- cplen -= i;
- }
-
- /* 3. take first compatible entry and strip manufacturer */
+ /* 2. take first compatible entry and strip manufacturer */
p = strchr(compatible, ',');
if (!p)
return -ENODEV;
@@ -473,3 +458,112 @@
}
EXPORT_SYMBOL_GPL(of_modalias_node);
+/**
+ * of_parse_phandles_with_args - Find a node pointed by phandle in a list
+ * @np: pointer to a device tree node containing a list
+ * @list_name: property name that contains a list
+ * @cells_name: property name that specifies phandles' arguments count
+ * @index: index of a phandle to parse out
+ * @out_node: pointer to device_node struct pointer (will be filled)
+ * @out_args: pointer to arguments pointer (will be filled)
+ *
+ * This function is useful to parse lists of phandles and their arguments.
+ * Returns 0 on success and fills out_node and out_args, on error returns
+ * appropriate errno value.
+ *
+ * Example:
+ *
+ * phandle1: node1 {
+ * #list-cells = <2>;
+ * }
+ *
+ * phandle2: node2 {
+ * #list-cells = <1>;
+ * }
+ *
+ * node3 {
+ * list = <&phandle1 1 2 &phandle2 3>;
+ * }
+ *
+ * To get a device_node of the `node2' node you may call this:
+ * of_parse_phandles_with_args(node3, "list", "#list-cells", 2, &node2, &args);
+ */
+int of_parse_phandles_with_args(struct device_node *np, const char *list_name,
+ const char *cells_name, int index,
+ struct device_node **out_node,
+ const void **out_args)
+{
+ int ret = -EINVAL;
+ const u32 *list;
+ const u32 *list_end;
+ int size;
+ int cur_index = 0;
+ struct device_node *node = NULL;
+ const void *args;
+
+ list = of_get_property(np, list_name, &size);
+ if (!list) {
+ ret = -ENOENT;
+ goto err0;
+ }
+ list_end = list + size / sizeof(*list);
+
+ while (list < list_end) {
+ const u32 *cells;
+ const phandle *phandle;
+
+ phandle = list;
+ args = list + 1;
+
+ /* one cell hole in the list = <>; */
+ if (!*phandle) {
+ list++;
+ goto next;
+ }
+
+ node = of_find_node_by_phandle(*phandle);
+ if (!node) {
+ pr_debug("%s: could not find phandle\n",
+ np->full_name);
+ goto err0;
+ }
+
+ cells = of_get_property(node, cells_name, &size);
+ if (!cells || size != sizeof(*cells)) {
+ pr_debug("%s: could not get %s for %s\n",
+ np->full_name, cells_name, node->full_name);
+ goto err1;
+ }
+
+ /* Next phandle is at offset of one phandle cell + #cells */
+ list += 1 + *cells;
+ if (list > list_end) {
+ pr_debug("%s: insufficient arguments length\n",
+ np->full_name);
+ goto err1;
+ }
+next:
+ if (cur_index == index)
+ break;
+
+ of_node_put(node);
+ node = NULL;
+ cur_index++;
+ }
+
+ if (!node) {
+ ret = -ENOENT;
+ goto err0;
+ }
+
+ *out_node = node;
+ *out_args = args;
+
+ return 0;
+err1:
+ of_node_put(node);
+err0:
+ pr_debug("%s failed with status %d\n", __func__, ret);
+ return ret;
+}
+EXPORT_SYMBOL(of_parse_phandles_with_args);
diff --git a/drivers/of/gpio.c b/drivers/of/gpio.c
index 1c9cab8..7cd7301 100644
--- a/drivers/of/gpio.c
+++ b/drivers/of/gpio.c
@@ -28,78 +28,35 @@
*/
int of_get_gpio(struct device_node *np, int index)
{
- int ret = -EINVAL;
+ int ret;
struct device_node *gc;
struct of_gpio_chip *of_gc = NULL;
int size;
- const u32 *gpios;
- u32 nr_cells;
- int i;
const void *gpio_spec;
const u32 *gpio_cells;
- int gpio_index = 0;
- gpios = of_get_property(np, "gpios", &size);
- if (!gpios) {
- ret = -ENOENT;
+ ret = of_parse_phandles_with_args(np, "gpios", "#gpio-cells", index,
+ &gc, &gpio_spec);
+ if (ret) {
+ pr_debug("%s: can't parse gpios property\n", __func__);
goto err0;
}
- nr_cells = size / sizeof(u32);
- for (i = 0; i < nr_cells; gpio_index++) {
- const phandle *gpio_phandle;
-
- gpio_phandle = gpios + i;
- gpio_spec = gpio_phandle + 1;
-
- /* one cell hole in the gpios = <>; */
- if (!*gpio_phandle) {
- if (gpio_index == index)
- return -ENOENT;
- i++;
- continue;
- }
-
- gc = of_find_node_by_phandle(*gpio_phandle);
- if (!gc) {
- pr_debug("%s: could not find phandle for gpios\n",
- np->full_name);
- goto err0;
- }
-
- of_gc = gc->data;
- if (!of_gc) {
- pr_debug("%s: gpio controller %s isn't registered\n",
- np->full_name, gc->full_name);
- goto err1;
- }
-
- gpio_cells = of_get_property(gc, "#gpio-cells", &size);
- if (!gpio_cells || size != sizeof(*gpio_cells) ||
- *gpio_cells != of_gc->gpio_cells) {
- pr_debug("%s: wrong #gpio-cells for %s\n",
- np->full_name, gc->full_name);
- goto err1;
- }
-
- /* Next phandle is at phandle cells + #gpio-cells */
- i += sizeof(*gpio_phandle) / sizeof(u32) + *gpio_cells;
- if (i >= nr_cells + 1) {
- pr_debug("%s: insufficient gpio-spec length\n",
- np->full_name);
- goto err1;
- }
-
- if (gpio_index == index)
- break;
-
- of_gc = NULL;
- of_node_put(gc);
- }
-
+ of_gc = gc->data;
if (!of_gc) {
- ret = -ENOENT;
- goto err0;
+ pr_debug("%s: gpio controller %s isn't registered\n",
+ np->full_name, gc->full_name);
+ ret = -ENODEV;
+ goto err1;
+ }
+
+ gpio_cells = of_get_property(gc, "#gpio-cells", &size);
+ if (!gpio_cells || size != sizeof(*gpio_cells) ||
+ *gpio_cells != of_gc->gpio_cells) {
+ pr_debug("%s: wrong #gpio-cells for %s\n",
+ np->full_name, gc->full_name);
+ ret = -EINVAL;
+ goto err1;
}
ret = of_gc->xlate(of_gc, np, gpio_spec);
diff --git a/drivers/pci/hotplug/rpaphp_slot.c b/drivers/pci/hotplug/rpaphp_slot.c
index 9b714ea..5088450 100644
--- a/drivers/pci/hotplug/rpaphp_slot.c
+++ b/drivers/pci/hotplug/rpaphp_slot.c
@@ -147,9 +147,5 @@
list_add(&slot->rpaphp_slot_list, &rpaphp_slot_head);
info("Slot [%s] registered\n", slot->name);
return 0;
-
-sysfs_fail:
- pci_hp_deregister(php_slot);
- return retval;
}
diff --git a/drivers/pnp/isapnp/core.c b/drivers/pnp/isapnp/core.c
index 101a835..46455fba 100644
--- a/drivers/pnp/isapnp/core.c
+++ b/drivers/pnp/isapnp/core.c
@@ -1012,7 +1012,7 @@
printk(KERN_INFO "isapnp: ISA Plug & Play support disabled\n");
return 0;
}
-#ifdef CONFIG_PPC_MERGE
+#ifdef CONFIG_PPC
if (check_legacy_ioport(_PIDXR) || check_legacy_ioport(_PNPWRP))
return -EINVAL;
#endif
diff --git a/drivers/pnp/pnpbios/core.c b/drivers/pnp/pnpbios/core.c
index 662dfcdd..2bfe133 100644
--- a/drivers/pnp/pnpbios/core.c
+++ b/drivers/pnp/pnpbios/core.c
@@ -519,7 +519,7 @@
{
int ret;
-#if defined(CONFIG_PPC_MERGE)
+#if defined(CONFIG_PPC)
if (check_legacy_ioport(PNPBIOS_BASE))
return -ENODEV;
#endif
@@ -577,7 +577,7 @@
{
struct task_struct *task;
-#if defined(CONFIG_PPC_MERGE)
+#if defined(CONFIG_PPC)
if (check_legacy_ioport(PNPBIOS_BASE))
return 0;
#endif
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 31786b3..db783b7 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -1123,42 +1123,6 @@
your boot loader (lilo or loadlin) about how to pass options to the
kernel at boot time.)
-config SERIAL_CPM_SCC1
- bool "Support for SCC1 serial port"
- depends on SERIAL_CPM=y
- help
- Select this option to use SCC1 as a serial port
-
-config SERIAL_CPM_SCC2
- bool "Support for SCC2 serial port"
- depends on SERIAL_CPM=y
- help
- Select this option to use SCC2 as a serial port
-
-config SERIAL_CPM_SCC3
- bool "Support for SCC3 serial port"
- depends on SERIAL_CPM=y
- help
- Select this option to use SCC3 as a serial port
-
-config SERIAL_CPM_SCC4
- bool "Support for SCC4 serial port"
- depends on SERIAL_CPM=y
- help
- Select this option to use SCC4 as a serial port
-
-config SERIAL_CPM_SMC1
- bool "Support for SMC1 serial port"
- depends on SERIAL_CPM=y
- help
- Select this option to use SMC1 as a serial port
-
-config SERIAL_CPM_SMC2
- bool "Support for SMC2 serial port"
- depends on SERIAL_CPM=y
- help
- Select this option to use SMC2 as a serial port
-
config SERIAL_SGI_L1_CONSOLE
bool "SGI Altix L1 serial console support"
depends on IA64_GENERIC || IA64_SGI_SN2
diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c
index 25efca5..a6c4d74 100644
--- a/drivers/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/serial/cpm_uart/cpm_uart_core.c
@@ -1333,6 +1333,9 @@
if (ret)
return ret;
+ /* initialize the device pointer for the port */
+ pinfo->port.dev = &ofdev->dev;
+
return uart_add_one_port(&cpm_reg, &pinfo->port);
}
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm1.c b/drivers/serial/cpm_uart/cpm_uart_cpm1.c
index 0f0aff0..1b94c56 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm1.c
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm1.c
@@ -100,7 +100,7 @@
mem_addr = (u8 *) cpm_dpram_addr(cpm_dpalloc(memsz, 8));
dma_addr = (u32)cpm_dpram_phys(mem_addr);
} else
- mem_addr = dma_alloc_coherent(NULL, memsz, &dma_addr,
+ mem_addr = dma_alloc_coherent(pinfo->port.dev, memsz, &dma_addr,
GFP_KERNEL);
if (mem_addr == NULL) {
@@ -127,8 +127,8 @@
void cpm_uart_freebuf(struct uart_cpm_port *pinfo)
{
- dma_free_coherent(NULL, L1_CACHE_ALIGN(pinfo->rx_nrfifos *
- pinfo->rx_fifosize) +
+ dma_free_coherent(pinfo->port.dev, L1_CACHE_ALIGN(pinfo->rx_nrfifos *
+ pinfo->rx_fifosize) +
L1_CACHE_ALIGN(pinfo->tx_nrfifos *
pinfo->tx_fifosize), pinfo->mem_addr,
pinfo->dma_addr);
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm2.c b/drivers/serial/cpm_uart/cpm_uart_cpm2.c
index b8db4d3..141c0a3 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm2.c
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm2.c
@@ -136,7 +136,7 @@
dma_addr = virt_to_bus(mem_addr);
}
else
- mem_addr = dma_alloc_coherent(NULL, memsz, &dma_addr,
+ mem_addr = dma_alloc_coherent(pinfo->port.dev, memsz, &dma_addr,
GFP_KERNEL);
if (mem_addr == NULL) {
@@ -163,8 +163,8 @@
void cpm_uart_freebuf(struct uart_cpm_port *pinfo)
{
- dma_free_coherent(NULL, L1_CACHE_ALIGN(pinfo->rx_nrfifos *
- pinfo->rx_fifosize) +
+ dma_free_coherent(pinfo->port.dev, L1_CACHE_ALIGN(pinfo->rx_nrfifos *
+ pinfo->rx_fifosize) +
L1_CACHE_ALIGN(pinfo->tx_nrfifos *
pinfo->tx_fifosize), (void __force *)pinfo->mem_addr,
pinfo->dma_addr);
diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c
index 3612607..6117d3d 100644
--- a/drivers/serial/mpc52xx_uart.c
+++ b/drivers/serial/mpc52xx_uart.c
@@ -72,13 +72,8 @@
#include <linux/console.h>
#include <linux/delay.h>
#include <linux/io.h>
-
-#if defined(CONFIG_PPC_MERGE)
#include <linux/of.h>
#include <linux/of_platform.h>
-#else
-#include <linux/platform_device.h>
-#endif
#include <asm/mpc52xx.h>
#include <asm/mpc512x.h>
@@ -107,12 +102,11 @@
* it's cleared, then a memset(...,0,...) should be added to
* the console_init
*/
-#if defined(CONFIG_PPC_MERGE)
+
/* lookup table for matching device nodes to index numbers */
static struct device_node *mpc52xx_uart_nodes[MPC52xx_PSC_MAXNUM];
static void mpc52xx_uart_of_enumerate(void);
-#endif
#define PSC(port) ((struct mpc52xx_psc __iomem *)((port)->membase))
@@ -255,17 +249,12 @@
/* Search for bus-frequency property in this node or a parent */
static unsigned long mpc52xx_getuartclk(void *p)
{
-#if defined(CONFIG_PPC_MERGE)
/*
* 5200 UARTs have a / 32 prescaler
* but the generic serial code assumes 16
* so return ipb freq / 2
*/
return mpc52xx_find_ipb_freq(p) / 2;
-#else
- pr_debug("unexpected call to mpc52xx_getuartclk with arch/ppc\n");
- return NULL;
-#endif
}
static struct psc_ops mpc52xx_psc_ops = {
@@ -886,10 +875,6 @@
/* CT{U,L}R are write-only ! */
*baud = CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD;
-#if !defined(CONFIG_PPC_MERGE)
- if (__res.bi_baudrate)
- *baud = __res.bi_baudrate;
-#endif
/* Parse them */
switch (mr1 & MPC52xx_PSC_MODE_BITS_MASK) {
@@ -946,42 +931,6 @@
psc_ops->cw_restore_ints(port);
}
-#if !defined(CONFIG_PPC_MERGE)
-static int __init
-mpc52xx_console_setup(struct console *co, char *options)
-{
- struct uart_port *port = &mpc52xx_uart_ports[co->index];
-
- int baud = CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD;
- int bits = 8;
- int parity = 'n';
- int flow = 'n';
-
- if (co->index < 0 || co->index >= MPC52xx_PSC_MAXNUM)
- return -EINVAL;
-
- /* Basic port init. Needed since we use some uart_??? func before
- * real init for early access */
- spin_lock_init(&port->lock);
- port->uartclk = __res.bi_ipbfreq / 2; /* Look at CTLR doc */
- port->ops = &mpc52xx_uart_ops;
- port->mapbase = MPC52xx_PA(MPC52xx_PSCx_OFFSET(co->index+1));
-
- /* We ioremap ourself */
- port->membase = ioremap(port->mapbase, MPC52xx_PSC_SIZE);
- if (port->membase == NULL)
- return -EINVAL;
-
- /* Setup the port parameters accoding to options */
- if (options)
- uart_parse_options(options, &baud, &parity, &bits, &flow);
- else
- mpc52xx_console_get_options(port, &baud, &parity, &bits, &flow);
-
- return uart_set_options(port, co, baud, parity, bits, flow);
-}
-
-#else
static int __init
mpc52xx_console_setup(struct console *co, char *options)
@@ -1053,7 +1002,6 @@
return uart_set_options(port, co, baud, parity, bits, flow);
}
-#endif /* defined(CONFIG_PPC_MERGE) */
static struct uart_driver mpc52xx_uart_driver;
@@ -1072,9 +1020,7 @@
static int __init
mpc52xx_console_init(void)
{
-#if defined(CONFIG_PPC_MERGE)
mpc52xx_uart_of_enumerate();
-#endif
register_console(&mpc52xx_console);
return 0;
}
@@ -1100,115 +1046,6 @@
.cons = MPC52xx_PSC_CONSOLE,
};
-
-#if !defined(CONFIG_PPC_MERGE)
-/* ======================================================================== */
-/* Platform Driver */
-/* ======================================================================== */
-
-static int __devinit
-mpc52xx_uart_probe(struct platform_device *dev)
-{
- struct resource *res = dev->resource;
-
- struct uart_port *port = NULL;
- int i, idx, ret;
-
- /* Check validity & presence */
- idx = dev->id;
- if (idx < 0 || idx >= MPC52xx_PSC_MAXNUM)
- return -EINVAL;
-
- if (!mpc52xx_match_psc_function(idx, "uart"))
- return -ENODEV;
-
- /* Init the port structure */
- port = &mpc52xx_uart_ports[idx];
-
- spin_lock_init(&port->lock);
- port->uartclk = __res.bi_ipbfreq / 2; /* Look at CTLR doc */
- port->fifosize = 512;
- port->iotype = UPIO_MEM;
- port->flags = UPF_BOOT_AUTOCONF |
- (uart_console(port) ? 0 : UPF_IOREMAP);
- port->line = idx;
- port->ops = &mpc52xx_uart_ops;
- port->dev = &dev->dev;
-
- /* Search for IRQ and mapbase */
- for (i = 0 ; i < dev->num_resources ; i++, res++) {
- if (res->flags & IORESOURCE_MEM)
- port->mapbase = res->start;
- else if (res->flags & IORESOURCE_IRQ)
- port->irq = res->start;
- }
- if (!port->irq || !port->mapbase)
- return -EINVAL;
-
- /* Add the port to the uart sub-system */
- ret = uart_add_one_port(&mpc52xx_uart_driver, port);
- if (!ret)
- platform_set_drvdata(dev, (void *)port);
-
- return ret;
-}
-
-static int
-mpc52xx_uart_remove(struct platform_device *dev)
-{
- struct uart_port *port = (struct uart_port *) platform_get_drvdata(dev);
-
- platform_set_drvdata(dev, NULL);
-
- if (port)
- uart_remove_one_port(&mpc52xx_uart_driver, port);
-
- return 0;
-}
-
-#ifdef CONFIG_PM
-static int
-mpc52xx_uart_suspend(struct platform_device *dev, pm_message_t state)
-{
- struct uart_port *port = (struct uart_port *) platform_get_drvdata(dev);
-
- if (port)
- uart_suspend_port(&mpc52xx_uart_driver, port);
-
- return 0;
-}
-
-static int
-mpc52xx_uart_resume(struct platform_device *dev)
-{
- struct uart_port *port = (struct uart_port *) platform_get_drvdata(dev);
-
- if (port)
- uart_resume_port(&mpc52xx_uart_driver, port);
-
- return 0;
-}
-#endif
-
-/* work with hotplug and coldplug */
-MODULE_ALIAS("platform:mpc52xx-psc");
-
-static struct platform_driver mpc52xx_uart_platform_driver = {
- .probe = mpc52xx_uart_probe,
- .remove = mpc52xx_uart_remove,
-#ifdef CONFIG_PM
- .suspend = mpc52xx_uart_suspend,
- .resume = mpc52xx_uart_resume,
-#endif
- .driver = {
- .owner = THIS_MODULE,
- .name = "mpc52xx-psc",
- },
-};
-#endif /* !defined(CONFIG_PPC_MERGE) */
-
-
-#if defined(CONFIG_PPC_MERGE)
/* ======================================================================== */
/* OF Platform Driver */
/* ======================================================================== */
@@ -1402,7 +1239,6 @@
.name = "mpc52xx-psc-uart",
},
};
-#endif /* defined(CONFIG_PPC_MERGE) */
/* ======================================================================== */
@@ -1423,7 +1259,6 @@
return ret;
}
-#if defined(CONFIG_PPC_MERGE)
mpc52xx_uart_of_enumerate();
ret = of_register_platform_driver(&mpc52xx_uart_of_driver);
@@ -1433,16 +1268,6 @@
uart_unregister_driver(&mpc52xx_uart_driver);
return ret;
}
-#else
- psc_ops = &mpc52xx_psc_ops;
- ret = platform_driver_register(&mpc52xx_uart_platform_driver);
- if (ret) {
- printk(KERN_ERR "%s: platform_driver_register failed (%i)\n",
- __FILE__, ret);
- uart_unregister_driver(&mpc52xx_uart_driver);
- return ret;
- }
-#endif
return 0;
}
@@ -1450,11 +1275,7 @@
static void __exit
mpc52xx_uart_exit(void)
{
-#if defined(CONFIG_PPC_MERGE)
of_unregister_platform_driver(&mpc52xx_uart_of_driver);
-#else
- platform_driver_unregister(&mpc52xx_uart_platform_driver);
-#endif
uart_unregister_driver(&mpc52xx_uart_driver);
}
diff --git a/drivers/serial/ucc_uart.c b/drivers/serial/ucc_uart.c
index 5c5d18d..539c933 100644
--- a/drivers/serial/ucc_uart.c
+++ b/drivers/serial/ucc_uart.c
@@ -1009,7 +1009,7 @@
rx_size = L1_CACHE_ALIGN(qe_port->rx_nrfifos * qe_port->rx_fifosize);
tx_size = L1_CACHE_ALIGN(qe_port->tx_nrfifos * qe_port->tx_fifosize);
- bd_virt = dma_alloc_coherent(NULL, rx_size + tx_size, &bd_dma_addr,
+ bd_virt = dma_alloc_coherent(port->dev, rx_size + tx_size, &bd_dma_addr,
GFP_KERNEL);
if (!bd_virt) {
dev_err(port->dev, "could not allocate buffer descriptors\n");
@@ -1051,7 +1051,7 @@
container_of(port, struct uart_qe_port, port);
struct ucc_slow_private *uccs = qe_port->us_private;
- dma_free_coherent(NULL, qe_port->bd_size, qe_port->bd_virt,
+ dma_free_coherent(port->dev, qe_port->bd_size, qe_port->bd_virt,
qe_port->bd_dma_addr);
ucc_slow_free(uccs);
diff --git a/drivers/spi/mpc52xx_psc_spi.c b/drivers/spi/mpc52xx_psc_spi.c
index 25eda71..cdb3d31 100644
--- a/drivers/spi/mpc52xx_psc_spi.c
+++ b/drivers/spi/mpc52xx_psc_spi.c
@@ -108,13 +108,13 @@
* Because psc->ccr is defined as 16bit register instead of 32bit
* just set the lower byte of BitClkDiv
*/
- ccr = in_be16(&psc->ccr);
+ ccr = in_be16((u16 __iomem *)&psc->ccr);
ccr &= 0xFF00;
if (cs->speed_hz)
ccr |= (MCLK / cs->speed_hz - 1) & 0xFF;
else /* by default SPI Clk 1MHz */
ccr |= (MCLK / 1000000 - 1) & 0xFF;
- out_be16(&psc->ccr, ccr);
+ out_be16((u16 __iomem *)&psc->ccr, ccr);
mps->bits_per_word = cs->bits_per_word;
if (mps->activate_cs)
@@ -347,7 +347,7 @@
/* Configure 8bit codec mode as a SPI master and use EOF flags */
/* SICR_SIM_CODEC8|SICR_GENCLK|SICR_SPI|SICR_MSTR|SICR_USEEOF */
out_be32(&psc->sicr, 0x0180C800);
- out_be16(&psc->ccr, 0x070F); /* by default SPI Clk 1MHz */
+ out_be16((u16 __iomem *)&psc->ccr, 0x070F); /* default SPI Clk 1MHz */
/* Set 2ms DTL delay */
out_8(&psc->ctur, 0x00);
diff --git a/include/linux/of.h b/include/linux/of.h
index 79886ad..e2488f5 100644
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -71,5 +71,8 @@
extern const struct of_device_id *of_match_node(
const struct of_device_id *matches, const struct device_node *node);
extern int of_modalias_node(struct device_node *node, char *modalias, int len);
+extern int of_parse_phandles_with_args(struct device_node *np,
+ const char *list_name, const char *cells_name, int index,
+ struct device_node **out_node, const void **out_args);
#endif /* _LINUX_OF_H */
diff --git a/include/linux/proc_fs.h b/include/linux/proc_fs.h
index fb61850..27d534f 100644
--- a/include/linux/proc_fs.h
+++ b/include/linux/proc_fs.h
@@ -139,7 +139,6 @@
extern struct dentry *proc_lookup(struct inode *, struct dentry *, struct nameidata *);
extern const struct file_operations proc_kcore_operations;
-extern const struct file_operations ppc_htab_operations;
extern int pid_ns_prepare_proc(struct pid_namespace *ns);
extern void pid_ns_release_proc(struct pid_namespace *ns);
diff --git a/include/math-emu/op-2.h b/include/math-emu/op-2.h
index e193fb0..4f26ecc 100644
--- a/include/math-emu/op-2.h
+++ b/include/math-emu/op-2.h
@@ -25,7 +25,7 @@
#ifndef __MATH_EMU_OP_2_H__
#define __MATH_EMU_OP_2_H__
-#define _FP_FRAC_DECL_2(X) _FP_W_TYPE X##_f0, X##_f1
+#define _FP_FRAC_DECL_2(X) _FP_W_TYPE X##_f0 = 0, X##_f1 = 0
#define _FP_FRAC_COPY_2(D,S) (D##_f0 = S##_f0, D##_f1 = S##_f1)
#define _FP_FRAC_SET_2(X,I) __FP_FRAC_SET_2(X, I)
#define _FP_FRAC_HIGH_2(X) (X##_f1)
diff --git a/include/math-emu/op-common.h b/include/math-emu/op-common.h
index bb46e76..cc1ec39 100644
--- a/include/math-emu/op-common.h
+++ b/include/math-emu/op-common.h
@@ -73,7 +73,7 @@
X##_c = FP_CLS_NAN; \
/* Check for signaling NaN */ \
if (!(_FP_FRAC_HIGH_RAW_##fs(X) & _FP_QNANBIT_##fs)) \
- FP_SET_EXCEPTION(FP_EX_INVALID); \
+ FP_SET_EXCEPTION(FP_EX_INVALID | FP_EX_INVALID_SNAN); \
} \
break; \
} \
@@ -324,7 +324,7 @@
_FP_FRAC_SET_##wc(R, _FP_NANFRAC_##fs); \
R##_s = _FP_NANSIGN_##fs; \
R##_c = FP_CLS_NAN; \
- FP_SET_EXCEPTION(FP_EX_INVALID); \
+ FP_SET_EXCEPTION(FP_EX_INVALID | FP_EX_INVALID_ISI); \
break; \
} \
/* FALLTHRU */ \
@@ -431,7 +431,7 @@
R##_s = _FP_NANSIGN_##fs; \
R##_c = FP_CLS_NAN; \
_FP_FRAC_SET_##wc(R, _FP_NANFRAC_##fs); \
- FP_SET_EXCEPTION(FP_EX_INVALID); \
+ FP_SET_EXCEPTION(FP_EX_INVALID | FP_EX_INVALID_IMZ);\
break; \
\
default: \
@@ -490,11 +490,15 @@
break; \
\
case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_INF): \
+ R##_s = _FP_NANSIGN_##fs; \
+ R##_c = FP_CLS_NAN; \
+ _FP_FRAC_SET_##wc(R, _FP_NANFRAC_##fs); \
+ FP_SET_EXCEPTION(FP_EX_INVALID | FP_EX_INVALID_IDI);\
case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_ZERO): \
R##_s = _FP_NANSIGN_##fs; \
R##_c = FP_CLS_NAN; \
_FP_FRAC_SET_##wc(R, _FP_NANFRAC_##fs); \
- FP_SET_EXCEPTION(FP_EX_INVALID); \
+ FP_SET_EXCEPTION(FP_EX_INVALID | FP_EX_INVALID_ZDZ);\
break; \
\
default: \
diff --git a/include/math-emu/soft-fp.h b/include/math-emu/soft-fp.h
index a6f873b..3f284bc 100644
--- a/include/math-emu/soft-fp.h
+++ b/include/math-emu/soft-fp.h
@@ -51,6 +51,25 @@
#ifndef FP_EX_INVALID
#define FP_EX_INVALID 0
#endif
+#ifndef FP_EX_INVALID_SNAN
+#define FP_EX_INVALID_SNAN 0
+#endif
+/* inf - inf */
+#ifndef FP_EX_INVALID_ISI
+#define FP_EX_INVALID_ISI 0
+#endif
+/* inf / inf */
+#ifndef FP_EX_INVALID_IDI
+#define FP_EX_INVALID_IDI 0
+#endif
+/* 0 / 0 */
+#ifndef FP_EX_INVALID_ZDZ
+#define FP_EX_INVALID_ZDZ 0
+#endif
+/* inf * 0 */
+#ifndef FP_EX_INVALID_IMZ
+#define FP_EX_INVALID_IMZ 0
+#endif
#ifndef FP_EX_OVERFLOW
#define FP_EX_OVERFLOW 0
#endif
diff --git a/sound/aoa/soundbus/soundbus.h b/sound/aoa/soundbus/soundbus.h
index 622cd37..a0f223c 100644
--- a/sound/aoa/soundbus/soundbus.h
+++ b/sound/aoa/soundbus/soundbus.h
@@ -8,7 +8,7 @@
#ifndef __SOUNDBUS_H
#define __SOUNDBUS_H
-#include <asm/of_device.h>
+#include <linux/of_device.h>
#include <sound/pcm.h>
#include <linux/list.h>
