blob: 2b153d7c5421639b1a2d563460e64c0bb0055f83 [file] [log] [blame]
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/interrupt-controller/st,stih407-irq-syscfg.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: STMicroelectronics STi System Configuration Controlled IRQs
maintainers:
- Patrice Chotard <patrice.chotard@foss.st.com>
description:
On STi based systems; External, CTI (Core Sight), PMU (Performance
Management), and PL310 L2 Cache IRQs are controlled using System
Configuration registers. This device is used to unmask them prior to use.
properties:
compatible:
const: st,stih407-irq-syscfg
st,syscfg:
description: Phandle to Cortex-A9 IRQ system config registers
$ref: /schemas/types.yaml#/definitions/phandle
st,irq-device:
description: Array of IRQs to enable.
$ref: /schemas/types.yaml#/definitions/uint32-array
items:
- description: Enable the IRQ of the channel one.
- description: Enable the IRQ of the channel two.
st,fiq-device:
description: Array of FIQs to enable.
$ref: /schemas/types.yaml#/definitions/uint32-array
items:
- description: Enable the IRQ of the channel one.
- description: Enable the IRQ of the channel two.
st,invert-ext:
description: External IRQs can be inverted at will. This property inverts
these three IRQs using bitwise logic, each one being encoded respectively
on the first, second and fourth bit.
$ref: /schemas/types.yaml#/definitions/uint32
enum: [ 1, 2, 3, 4, 5, 6 ]
required:
- compatible
- st,syscfg
- st,irq-device
- st,fiq-device
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/irq-st.h>
irq-syscfg {
compatible = "st,stih407-irq-syscfg";
st,syscfg = <&syscfg_cpu>;
st,irq-device = <ST_IRQ_SYSCFG_PMU_0>,
<ST_IRQ_SYSCFG_PMU_1>;
st,fiq-device = <ST_IRQ_SYSCFG_DISABLED>,
<ST_IRQ_SYSCFG_DISABLED>;
};
...