| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (c) 2015, The Linux Foundation. All rights reserved. |
| * Copyright (c) 2023, Linaro Ltd. |
| */ |
| |
| /dts-v1/; |
| |
| #include "apq8016-sbc.dts" |
| |
| / { |
| camera_vdddo_1v8: camera-vdddo-1v8 { |
| compatible = "regulator-fixed"; |
| regulator-name = "camera_vdddo"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-always-on; |
| }; |
| |
| camera_vdda_2v8: camera-vdda-2v8 { |
| compatible = "regulator-fixed"; |
| regulator-name = "camera_vdda"; |
| regulator-min-microvolt = <2800000>; |
| regulator-max-microvolt = <2800000>; |
| regulator-always-on; |
| }; |
| |
| camera_vddd_1v5: camera-vddd-1v5 { |
| compatible = "regulator-fixed"; |
| regulator-name = "camera_vddd"; |
| regulator-min-microvolt = <1500000>; |
| regulator-max-microvolt = <1500000>; |
| regulator-always-on; |
| }; |
| }; |
| |
| &camss { |
| status = "okay"; |
| |
| ports { |
| port@0 { |
| reg = <0>; |
| csiphy0_ep: endpoint { |
| data-lanes = <0 2>; |
| remote-endpoint = <&ov5640_ep>; |
| }; |
| }; |
| }; |
| }; |
| |
| &cci { |
| status = "okay"; |
| }; |
| |
| &cci_i2c0 { |
| camera_rear@3b { |
| compatible = "ovti,ov5640"; |
| reg = <0x3b>; |
| |
| powerdown-gpios = <&tlmm 34 GPIO_ACTIVE_HIGH>; |
| reset-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&camera_rear_default>; |
| |
| clocks = <&gcc GCC_CAMSS_MCLK0_CLK>; |
| clock-names = "xclk"; |
| assigned-clocks = <&gcc GCC_CAMSS_MCLK0_CLK>; |
| assigned-clock-rates = <23880000>; |
| |
| DOVDD-supply = <&camera_vdddo_1v8>; |
| AVDD-supply = <&camera_vdda_2v8>; |
| DVDD-supply = <&camera_vddd_1v5>; |
| |
| port { |
| ov5640_ep: endpoint { |
| data-lanes = <1 2>; |
| remote-endpoint = <&csiphy0_ep>; |
| }; |
| }; |
| }; |
| }; |
