| // SPDX-License-Identifier: BSD-3-Clause |
| /* |
| * sc7280 SoC device tree source |
| * |
| * Copyright (c) 2020-2021, The Linux Foundation. All rights reserved. |
| */ |
| #include <dt-bindings/clock/qcom,camcc-sc7280.h> |
| #include <dt-bindings/clock/qcom,dispcc-sc7280.h> |
| #include <dt-bindings/clock/qcom,gcc-sc7280.h> |
| #include <dt-bindings/clock/qcom,gpucc-sc7280.h> |
| #include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h> |
| #include <dt-bindings/clock/qcom,lpasscorecc-sc7280.h> |
| #include <dt-bindings/clock/qcom,rpmh.h> |
| #include <dt-bindings/clock/qcom,videocc-sc7280.h> |
| #include <dt-bindings/dma/qcom-gpi.h> |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/interconnect/qcom,osm-l3.h> |
| #include <dt-bindings/interconnect/qcom,sc7280.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/mailbox/qcom-ipcc.h> |
| #include <dt-bindings/power/qcom-rpmpd.h> |
| #include <dt-bindings/reset/qcom,sdm845-aoss.h> |
| #include <dt-bindings/reset/qcom,sdm845-pdc.h> |
| #include <dt-bindings/soc/qcom,rpmh-rsc.h> |
| #include <dt-bindings/sound/qcom,lpass.h> |
| #include <dt-bindings/thermal/thermal.h> |
| |
| / { |
| interrupt-parent = <&intc>; |
| |
| #address-cells = <2>; |
| #size-cells = <2>; |
| |
| chosen { }; |
| |
| aliases { |
| i2c0 = &i2c0; |
| i2c1 = &i2c1; |
| i2c2 = &i2c2; |
| i2c3 = &i2c3; |
| i2c4 = &i2c4; |
| i2c5 = &i2c5; |
| i2c6 = &i2c6; |
| i2c7 = &i2c7; |
| i2c8 = &i2c8; |
| i2c9 = &i2c9; |
| i2c10 = &i2c10; |
| i2c11 = &i2c11; |
| i2c12 = &i2c12; |
| i2c13 = &i2c13; |
| i2c14 = &i2c14; |
| i2c15 = &i2c15; |
| mmc1 = &sdhc_1; |
| mmc2 = &sdhc_2; |
| spi0 = &spi0; |
| spi1 = &spi1; |
| spi2 = &spi2; |
| spi3 = &spi3; |
| spi4 = &spi4; |
| spi5 = &spi5; |
| spi6 = &spi6; |
| spi7 = &spi7; |
| spi8 = &spi8; |
| spi9 = &spi9; |
| spi10 = &spi10; |
| spi11 = &spi11; |
| spi12 = &spi12; |
| spi13 = &spi13; |
| spi14 = &spi14; |
| spi15 = &spi15; |
| }; |
| |
| clocks { |
| xo_board: xo-board { |
| compatible = "fixed-clock"; |
| clock-frequency = <76800000>; |
| #clock-cells = <0>; |
| }; |
| |
| sleep_clk: sleep-clk { |
| compatible = "fixed-clock"; |
| clock-frequency = <32000>; |
| #clock-cells = <0>; |
| }; |
| }; |
| |
| reserved-memory { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| wlan_ce_mem: memory@4cd000 { |
| no-map; |
| reg = <0x0 0x004cd000 0x0 0x1000>; |
| }; |
| |
| hyp_mem: memory@80000000 { |
| reg = <0x0 0x80000000 0x0 0x600000>; |
| no-map; |
| }; |
| |
| xbl_mem: memory@80600000 { |
| reg = <0x0 0x80600000 0x0 0x200000>; |
| no-map; |
| }; |
| |
| aop_mem: memory@80800000 { |
| reg = <0x0 0x80800000 0x0 0x60000>; |
| no-map; |
| }; |
| |
| aop_cmd_db_mem: memory@80860000 { |
| reg = <0x0 0x80860000 0x0 0x20000>; |
| compatible = "qcom,cmd-db"; |
| no-map; |
| }; |
| |
| reserved_xbl_uefi_log: memory@80880000 { |
| reg = <0x0 0x80884000 0x0 0x10000>; |
| no-map; |
| }; |
| |
| sec_apps_mem: memory@808ff000 { |
| reg = <0x0 0x808ff000 0x0 0x1000>; |
| no-map; |
| }; |
| |
| smem_mem: memory@80900000 { |
| reg = <0x0 0x80900000 0x0 0x200000>; |
| no-map; |
| }; |
| |
| cpucp_mem: memory@80b00000 { |
| no-map; |
| reg = <0x0 0x80b00000 0x0 0x100000>; |
| }; |
| |
| wlan_fw_mem: memory@80c00000 { |
| reg = <0x0 0x80c00000 0x0 0xc00000>; |
| no-map; |
| }; |
| |
| video_mem: memory@8b200000 { |
| reg = <0x0 0x8b200000 0x0 0x500000>; |
| no-map; |
| }; |
| |
| ipa_fw_mem: memory@8b700000 { |
| reg = <0 0x8b700000 0 0x10000>; |
| no-map; |
| }; |
| |
| rmtfs_mem: memory@9c900000 { |
| compatible = "qcom,rmtfs-mem"; |
| reg = <0x0 0x9c900000 0x0 0x280000>; |
| no-map; |
| |
| qcom,client-id = <1>; |
| qcom,vmid = <15>; |
| }; |
| }; |
| |
| cpus { |
| #address-cells = <2>; |
| #size-cells = <0>; |
| |
| CPU0: cpu@0 { |
| device_type = "cpu"; |
| compatible = "qcom,kryo"; |
| reg = <0x0 0x0>; |
| clocks = <&cpufreq_hw 0>; |
| enable-method = "psci"; |
| cpu-idle-states = <&LITTLE_CPU_SLEEP_0 |
| &LITTLE_CPU_SLEEP_1 |
| &CLUSTER_SLEEP_0>; |
| next-level-cache = <&L2_0>; |
| operating-points-v2 = <&cpu0_opp_table>; |
| interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, |
| <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>; |
| qcom,freq-domain = <&cpufreq_hw 0>; |
| #cooling-cells = <2>; |
| L2_0: l2-cache { |
| compatible = "cache"; |
| cache-level = <2>; |
| cache-unified; |
| next-level-cache = <&L3_0>; |
| L3_0: l3-cache { |
| compatible = "cache"; |
| cache-level = <3>; |
| cache-unified; |
| }; |
| }; |
| }; |
| |
| CPU1: cpu@100 { |
| device_type = "cpu"; |
| compatible = "qcom,kryo"; |
| reg = <0x0 0x100>; |
| clocks = <&cpufreq_hw 0>; |
| enable-method = "psci"; |
| cpu-idle-states = <&LITTLE_CPU_SLEEP_0 |
| &LITTLE_CPU_SLEEP_1 |
| &CLUSTER_SLEEP_0>; |
| next-level-cache = <&L2_100>; |
| operating-points-v2 = <&cpu0_opp_table>; |
| interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, |
| <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>; |
| qcom,freq-domain = <&cpufreq_hw 0>; |
| #cooling-cells = <2>; |
| L2_100: l2-cache { |
| compatible = "cache"; |
| cache-level = <2>; |
| cache-unified; |
| next-level-cache = <&L3_0>; |
| }; |
| }; |
| |
| CPU2: cpu@200 { |
| device_type = "cpu"; |
| compatible = "qcom,kryo"; |
| reg = <0x0 0x200>; |
| clocks = <&cpufreq_hw 0>; |
| enable-method = "psci"; |
| cpu-idle-states = <&LITTLE_CPU_SLEEP_0 |
| &LITTLE_CPU_SLEEP_1 |
| &CLUSTER_SLEEP_0>; |
| next-level-cache = <&L2_200>; |
| operating-points-v2 = <&cpu0_opp_table>; |
| interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, |
| <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>; |
| qcom,freq-domain = <&cpufreq_hw 0>; |
| #cooling-cells = <2>; |
| L2_200: l2-cache { |
| compatible = "cache"; |
| cache-level = <2>; |
| cache-unified; |
| next-level-cache = <&L3_0>; |
| }; |
| }; |
| |
| CPU3: cpu@300 { |
| device_type = "cpu"; |
| compatible = "qcom,kryo"; |
| reg = <0x0 0x300>; |
| clocks = <&cpufreq_hw 0>; |
| enable-method = "psci"; |
| cpu-idle-states = <&LITTLE_CPU_SLEEP_0 |
| &LITTLE_CPU_SLEEP_1 |
| &CLUSTER_SLEEP_0>; |
| next-level-cache = <&L2_300>; |
| operating-points-v2 = <&cpu0_opp_table>; |
| interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, |
| <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>; |
| qcom,freq-domain = <&cpufreq_hw 0>; |
| #cooling-cells = <2>; |
| L2_300: l2-cache { |
| compatible = "cache"; |
| cache-level = <2>; |
| cache-unified; |
| next-level-cache = <&L3_0>; |
| }; |
| }; |
| |
| CPU4: cpu@400 { |
| device_type = "cpu"; |
| compatible = "qcom,kryo"; |
| reg = <0x0 0x400>; |
| clocks = <&cpufreq_hw 1>; |
| enable-method = "psci"; |
| cpu-idle-states = <&BIG_CPU_SLEEP_0 |
| &BIG_CPU_SLEEP_1 |
| &CLUSTER_SLEEP_0>; |
| next-level-cache = <&L2_400>; |
| operating-points-v2 = <&cpu4_opp_table>; |
| interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, |
| <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>; |
| qcom,freq-domain = <&cpufreq_hw 1>; |
| #cooling-cells = <2>; |
| L2_400: l2-cache { |
| compatible = "cache"; |
| cache-level = <2>; |
| cache-unified; |
| next-level-cache = <&L3_0>; |
| }; |
| }; |
| |
| CPU5: cpu@500 { |
| device_type = "cpu"; |
| compatible = "qcom,kryo"; |
| reg = <0x0 0x500>; |
| clocks = <&cpufreq_hw 1>; |
| enable-method = "psci"; |
| cpu-idle-states = <&BIG_CPU_SLEEP_0 |
| &BIG_CPU_SLEEP_1 |
| &CLUSTER_SLEEP_0>; |
| next-level-cache = <&L2_500>; |
| operating-points-v2 = <&cpu4_opp_table>; |
| interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, |
| <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>; |
| qcom,freq-domain = <&cpufreq_hw 1>; |
| #cooling-cells = <2>; |
| L2_500: l2-cache { |
| compatible = "cache"; |
| cache-level = <2>; |
| cache-unified; |
| next-level-cache = <&L3_0>; |
| }; |
| }; |
| |
| CPU6: cpu@600 { |
| device_type = "cpu"; |
| compatible = "qcom,kryo"; |
| reg = <0x0 0x600>; |
| clocks = <&cpufreq_hw 1>; |
| enable-method = "psci"; |
| cpu-idle-states = <&BIG_CPU_SLEEP_0 |
| &BIG_CPU_SLEEP_1 |
| &CLUSTER_SLEEP_0>; |
| next-level-cache = <&L2_600>; |
| operating-points-v2 = <&cpu4_opp_table>; |
| interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, |
| <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>; |
| qcom,freq-domain = <&cpufreq_hw 1>; |
| #cooling-cells = <2>; |
| L2_600: l2-cache { |
| compatible = "cache"; |
| cache-level = <2>; |
| cache-unified; |
| next-level-cache = <&L3_0>; |
| }; |
| }; |
| |
| CPU7: cpu@700 { |
| device_type = "cpu"; |
| compatible = "qcom,kryo"; |
| reg = <0x0 0x700>; |
| clocks = <&cpufreq_hw 2>; |
| enable-method = "psci"; |
| cpu-idle-states = <&BIG_CPU_SLEEP_0 |
| &BIG_CPU_SLEEP_1 |
| &CLUSTER_SLEEP_0>; |
| next-level-cache = <&L2_700>; |
| operating-points-v2 = <&cpu7_opp_table>; |
| interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, |
| <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>; |
| qcom,freq-domain = <&cpufreq_hw 2>; |
| #cooling-cells = <2>; |
| L2_700: l2-cache { |
| compatible = "cache"; |
| cache-level = <2>; |
| cache-unified; |
| next-level-cache = <&L3_0>; |
| }; |
| }; |
| |
| cpu-map { |
| cluster0 { |
| core0 { |
| cpu = <&CPU0>; |
| }; |
| |
| core1 { |
| cpu = <&CPU1>; |
| }; |
| |
| core2 { |
| cpu = <&CPU2>; |
| }; |
| |
| core3 { |
| cpu = <&CPU3>; |
| }; |
| |
| core4 { |
| cpu = <&CPU4>; |
| }; |
| |
| core5 { |
| cpu = <&CPU5>; |
| }; |
| |
| core6 { |
| cpu = <&CPU6>; |
| }; |
| |
| core7 { |
| cpu = <&CPU7>; |
| }; |
| }; |
| }; |
| |
| idle-states { |
| entry-method = "psci"; |
| |
| LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 { |
| compatible = "arm,idle-state"; |
| idle-state-name = "little-power-down"; |
| arm,psci-suspend-param = <0x40000003>; |
| entry-latency-us = <549>; |
| exit-latency-us = <901>; |
| min-residency-us = <1774>; |
| local-timer-stop; |
| }; |
| |
| LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 { |
| compatible = "arm,idle-state"; |
| idle-state-name = "little-rail-power-down"; |
| arm,psci-suspend-param = <0x40000004>; |
| entry-latency-us = <702>; |
| exit-latency-us = <915>; |
| min-residency-us = <4001>; |
| local-timer-stop; |
| }; |
| |
| BIG_CPU_SLEEP_0: cpu-sleep-1-0 { |
| compatible = "arm,idle-state"; |
| idle-state-name = "big-power-down"; |
| arm,psci-suspend-param = <0x40000003>; |
| entry-latency-us = <523>; |
| exit-latency-us = <1244>; |
| min-residency-us = <2207>; |
| local-timer-stop; |
| }; |
| |
| BIG_CPU_SLEEP_1: cpu-sleep-1-1 { |
| compatible = "arm,idle-state"; |
| idle-state-name = "big-rail-power-down"; |
| arm,psci-suspend-param = <0x40000004>; |
| entry-latency-us = <526>; |
| exit-latency-us = <1854>; |
| min-residency-us = <5555>; |
| local-timer-stop; |
| }; |
| |
| CLUSTER_SLEEP_0: cluster-sleep-0 { |
| compatible = "arm,idle-state"; |
| idle-state-name = "cluster-power-down"; |
| arm,psci-suspend-param = <0x40003444>; |
| entry-latency-us = <3263>; |
| exit-latency-us = <6562>; |
| min-residency-us = <9926>; |
| local-timer-stop; |
| }; |
| }; |
| }; |
| |
| cpu0_opp_table: opp-table-cpu0 { |
| compatible = "operating-points-v2"; |
| opp-shared; |
| |
| cpu0_opp_300mhz: opp-300000000 { |
| opp-hz = /bits/ 64 <300000000>; |
| opp-peak-kBps = <800000 9600000>; |
| }; |
| |
| cpu0_opp_691mhz: opp-691200000 { |
| opp-hz = /bits/ 64 <691200000>; |
| opp-peak-kBps = <800000 17817600>; |
| }; |
| |
| cpu0_opp_806mhz: opp-806400000 { |
| opp-hz = /bits/ 64 <806400000>; |
| opp-peak-kBps = <800000 20889600>; |
| }; |
| |
| cpu0_opp_941mhz: opp-940800000 { |
| opp-hz = /bits/ 64 <940800000>; |
| opp-peak-kBps = <1804000 24576000>; |
| }; |
| |
| cpu0_opp_1152mhz: opp-1152000000 { |
| opp-hz = /bits/ 64 <1152000000>; |
| opp-peak-kBps = <2188000 27033600>; |
| }; |
| |
| cpu0_opp_1325mhz: opp-1324800000 { |
| opp-hz = /bits/ 64 <1324800000>; |
| opp-peak-kBps = <2188000 33792000>; |
| }; |
| |
| cpu0_opp_1517mhz: opp-1516800000 { |
| opp-hz = /bits/ 64 <1516800000>; |
| opp-peak-kBps = <3072000 38092800>; |
| }; |
| |
| cpu0_opp_1651mhz: opp-1651200000 { |
| opp-hz = /bits/ 64 <1651200000>; |
| opp-peak-kBps = <3072000 41779200>; |
| }; |
| |
| cpu0_opp_1805mhz: opp-1804800000 { |
| opp-hz = /bits/ 64 <1804800000>; |
| opp-peak-kBps = <4068000 48537600>; |
| }; |
| |
| cpu0_opp_1958mhz: opp-1958400000 { |
| opp-hz = /bits/ 64 <1958400000>; |
| opp-peak-kBps = <4068000 48537600>; |
| }; |
| |
| cpu0_opp_2016mhz: opp-2016000000 { |
| opp-hz = /bits/ 64 <2016000000>; |
| opp-peak-kBps = <6220000 48537600>; |
| }; |
| }; |
| |
| cpu4_opp_table: opp-table-cpu4 { |
| compatible = "operating-points-v2"; |
| opp-shared; |
| |
| cpu4_opp_691mhz: opp-691200000 { |
| opp-hz = /bits/ 64 <691200000>; |
| opp-peak-kBps = <1804000 9600000>; |
| }; |
| |
| cpu4_opp_941mhz: opp-940800000 { |
| opp-hz = /bits/ 64 <940800000>; |
| opp-peak-kBps = <2188000 17817600>; |
| }; |
| |
| cpu4_opp_1229mhz: opp-1228800000 { |
| opp-hz = /bits/ 64 <1228800000>; |
| opp-peak-kBps = <4068000 24576000>; |
| }; |
| |
| cpu4_opp_1344mhz: opp-1344000000 { |
| opp-hz = /bits/ 64 <1344000000>; |
| opp-peak-kBps = <4068000 24576000>; |
| }; |
| |
| cpu4_opp_1517mhz: opp-1516800000 { |
| opp-hz = /bits/ 64 <1516800000>; |
| opp-peak-kBps = <4068000 24576000>; |
| }; |
| |
| cpu4_opp_1651mhz: opp-1651200000 { |
| opp-hz = /bits/ 64 <1651200000>; |
| opp-peak-kBps = <6220000 38092800>; |
| }; |
| |
| cpu4_opp_1901mhz: opp-1900800000 { |
| opp-hz = /bits/ 64 <1900800000>; |
| opp-peak-kBps = <6220000 44851200>; |
| }; |
| |
| cpu4_opp_2054mhz: opp-2054400000 { |
| opp-hz = /bits/ 64 <2054400000>; |
| opp-peak-kBps = <6220000 44851200>; |
| }; |
| |
| cpu4_opp_2112mhz: opp-2112000000 { |
| opp-hz = /bits/ 64 <2112000000>; |
| opp-peak-kBps = <6220000 44851200>; |
| }; |
| |
| cpu4_opp_2131mhz: opp-2131200000 { |
| opp-hz = /bits/ 64 <2131200000>; |
| opp-peak-kBps = <6220000 44851200>; |
| }; |
| |
| cpu4_opp_2208mhz: opp-2208000000 { |
| opp-hz = /bits/ 64 <2208000000>; |
| opp-peak-kBps = <6220000 44851200>; |
| }; |
| |
| cpu4_opp_2400mhz: opp-2400000000 { |
| opp-hz = /bits/ 64 <2400000000>; |
| opp-peak-kBps = <8532000 48537600>; |
| }; |
| |
| cpu4_opp_2611mhz: opp-2611200000 { |
| opp-hz = /bits/ 64 <2611200000>; |
| opp-peak-kBps = <8532000 48537600>; |
| }; |
| }; |
| |
| cpu7_opp_table: opp-table-cpu7 { |
| compatible = "operating-points-v2"; |
| opp-shared; |
| |
| cpu7_opp_806mhz: opp-806400000 { |
| opp-hz = /bits/ 64 <806400000>; |
| opp-peak-kBps = <1804000 9600000>; |
| }; |
| |
| cpu7_opp_1056mhz: opp-1056000000 { |
| opp-hz = /bits/ 64 <1056000000>; |
| opp-peak-kBps = <2188000 17817600>; |
| }; |
| |
| cpu7_opp_1325mhz: opp-1324800000 { |
| opp-hz = /bits/ 64 <1324800000>; |
| opp-peak-kBps = <4068000 24576000>; |
| }; |
| |
| cpu7_opp_1517mhz: opp-1516800000 { |
| opp-hz = /bits/ 64 <1516800000>; |
| opp-peak-kBps = <4068000 24576000>; |
| }; |
| |
| cpu7_opp_1766mhz: opp-1766400000 { |
| opp-hz = /bits/ 64 <1766400000>; |
| opp-peak-kBps = <6220000 38092800>; |
| }; |
| |
| cpu7_opp_1862mhz: opp-1862400000 { |
| opp-hz = /bits/ 64 <1862400000>; |
| opp-peak-kBps = <6220000 38092800>; |
| }; |
| |
| cpu7_opp_2035mhz: opp-2035200000 { |
| opp-hz = /bits/ 64 <2035200000>; |
| opp-peak-kBps = <6220000 38092800>; |
| }; |
| |
| cpu7_opp_2112mhz: opp-2112000000 { |
| opp-hz = /bits/ 64 <2112000000>; |
| opp-peak-kBps = <6220000 44851200>; |
| }; |
| |
| cpu7_opp_2208mhz: opp-2208000000 { |
| opp-hz = /bits/ 64 <2208000000>; |
| opp-peak-kBps = <6220000 44851200>; |
| }; |
| |
| cpu7_opp_2381mhz: opp-2380800000 { |
| opp-hz = /bits/ 64 <2380800000>; |
| opp-peak-kBps = <6832000 44851200>; |
| }; |
| |
| cpu7_opp_2400mhz: opp-2400000000 { |
| opp-hz = /bits/ 64 <2400000000>; |
| opp-peak-kBps = <8532000 48537600>; |
| }; |
| |
| cpu7_opp_2515mhz: opp-2515200000 { |
| opp-hz = /bits/ 64 <2515200000>; |
| opp-peak-kBps = <8532000 48537600>; |
| }; |
| |
| cpu7_opp_2707mhz: opp-2707200000 { |
| opp-hz = /bits/ 64 <2707200000>; |
| opp-peak-kBps = <8532000 48537600>; |
| }; |
| |
| cpu7_opp_3014mhz: opp-3014400000 { |
| opp-hz = /bits/ 64 <3014400000>; |
| opp-peak-kBps = <8532000 48537600>; |
| }; |
| }; |
| |
| eud_typec: connector { |
| compatible = "usb-c-connector"; |
| |
| ports { |
| port@0 { |
| con_eud: endpoint { |
| remote-endpoint = <&eud_con>; |
| }; |
| }; |
| }; |
| }; |
| |
| memory@80000000 { |
| device_type = "memory"; |
| /* We expect the bootloader to fill in the size */ |
| reg = <0 0x80000000 0 0>; |
| }; |
| |
| firmware { |
| scm: scm { |
| compatible = "qcom,scm-sc7280", "qcom,scm"; |
| }; |
| }; |
| |
| clk_virt: interconnect { |
| compatible = "qcom,sc7280-clk-virt"; |
| #interconnect-cells = <2>; |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| }; |
| |
| smem { |
| compatible = "qcom,smem"; |
| memory-region = <&smem_mem>; |
| hwlocks = <&tcsr_mutex 3>; |
| }; |
| |
| smp2p-adsp { |
| compatible = "qcom,smp2p"; |
| qcom,smem = <443>, <429>; |
| interrupts-extended = <&ipcc IPCC_CLIENT_LPASS |
| IPCC_MPROC_SIGNAL_SMP2P |
| IRQ_TYPE_EDGE_RISING>; |
| mboxes = <&ipcc IPCC_CLIENT_LPASS |
| IPCC_MPROC_SIGNAL_SMP2P>; |
| |
| qcom,local-pid = <0>; |
| qcom,remote-pid = <2>; |
| |
| adsp_smp2p_out: master-kernel { |
| qcom,entry-name = "master-kernel"; |
| #qcom,smem-state-cells = <1>; |
| }; |
| |
| adsp_smp2p_in: slave-kernel { |
| qcom,entry-name = "slave-kernel"; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| }; |
| |
| smp2p-cdsp { |
| compatible = "qcom,smp2p"; |
| qcom,smem = <94>, <432>; |
| interrupts-extended = <&ipcc IPCC_CLIENT_CDSP |
| IPCC_MPROC_SIGNAL_SMP2P |
| IRQ_TYPE_EDGE_RISING>; |
| mboxes = <&ipcc IPCC_CLIENT_CDSP |
| IPCC_MPROC_SIGNAL_SMP2P>; |
| |
| qcom,local-pid = <0>; |
| qcom,remote-pid = <5>; |
| |
| cdsp_smp2p_out: master-kernel { |
| qcom,entry-name = "master-kernel"; |
| #qcom,smem-state-cells = <1>; |
| }; |
| |
| cdsp_smp2p_in: slave-kernel { |
| qcom,entry-name = "slave-kernel"; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| }; |
| |
| smp2p-mpss { |
| compatible = "qcom,smp2p"; |
| qcom,smem = <435>, <428>; |
| interrupts-extended = <&ipcc IPCC_CLIENT_MPSS |
| IPCC_MPROC_SIGNAL_SMP2P |
| IRQ_TYPE_EDGE_RISING>; |
| mboxes = <&ipcc IPCC_CLIENT_MPSS |
| IPCC_MPROC_SIGNAL_SMP2P>; |
| |
| qcom,local-pid = <0>; |
| qcom,remote-pid = <1>; |
| |
| modem_smp2p_out: master-kernel { |
| qcom,entry-name = "master-kernel"; |
| #qcom,smem-state-cells = <1>; |
| }; |
| |
| modem_smp2p_in: slave-kernel { |
| qcom,entry-name = "slave-kernel"; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| ipa_smp2p_out: ipa-ap-to-modem { |
| qcom,entry-name = "ipa"; |
| #qcom,smem-state-cells = <1>; |
| }; |
| |
| ipa_smp2p_in: ipa-modem-to-ap { |
| qcom,entry-name = "ipa"; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| }; |
| |
| smp2p-wpss { |
| compatible = "qcom,smp2p"; |
| qcom,smem = <617>, <616>; |
| interrupts-extended = <&ipcc IPCC_CLIENT_WPSS |
| IPCC_MPROC_SIGNAL_SMP2P |
| IRQ_TYPE_EDGE_RISING>; |
| mboxes = <&ipcc IPCC_CLIENT_WPSS |
| IPCC_MPROC_SIGNAL_SMP2P>; |
| |
| qcom,local-pid = <0>; |
| qcom,remote-pid = <13>; |
| |
| wpss_smp2p_out: master-kernel { |
| qcom,entry-name = "master-kernel"; |
| #qcom,smem-state-cells = <1>; |
| }; |
| |
| wpss_smp2p_in: slave-kernel { |
| qcom,entry-name = "slave-kernel"; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| wlan_smp2p_out: wlan-ap-to-wpss { |
| qcom,entry-name = "wlan"; |
| #qcom,smem-state-cells = <1>; |
| }; |
| |
| wlan_smp2p_in: wlan-wpss-to-ap { |
| qcom,entry-name = "wlan"; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| }; |
| |
| pmu { |
| compatible = "arm,armv8-pmuv3"; |
| interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; |
| }; |
| |
| psci { |
| compatible = "arm,psci-1.0"; |
| method = "smc"; |
| }; |
| |
| qspi_opp_table: opp-table-qspi { |
| compatible = "operating-points-v2"; |
| |
| opp-75000000 { |
| opp-hz = /bits/ 64 <75000000>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| }; |
| |
| opp-150000000 { |
| opp-hz = /bits/ 64 <150000000>; |
| required-opps = <&rpmhpd_opp_svs>; |
| }; |
| |
| opp-200000000 { |
| opp-hz = /bits/ 64 <200000000>; |
| required-opps = <&rpmhpd_opp_svs_l1>; |
| }; |
| |
| opp-300000000 { |
| opp-hz = /bits/ 64 <300000000>; |
| required-opps = <&rpmhpd_opp_nom>; |
| }; |
| }; |
| |
| qup_opp_table: opp-table-qup { |
| compatible = "operating-points-v2"; |
| |
| opp-75000000 { |
| opp-hz = /bits/ 64 <75000000>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| }; |
| |
| opp-100000000 { |
| opp-hz = /bits/ 64 <100000000>; |
| required-opps = <&rpmhpd_opp_svs>; |
| }; |
| |
| opp-128000000 { |
| opp-hz = /bits/ 64 <128000000>; |
| required-opps = <&rpmhpd_opp_nom>; |
| }; |
| }; |
| |
| soc: soc@0 { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges = <0 0 0 0 0x10 0>; |
| dma-ranges = <0 0 0 0 0x10 0>; |
| compatible = "simple-bus"; |
| |
| gcc: clock-controller@100000 { |
| compatible = "qcom,gcc-sc7280"; |
| reg = <0 0x00100000 0 0x1f0000>; |
| clocks = <&rpmhcc RPMH_CXO_CLK>, |
| <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>, |
| <0>, <&pcie1_lane>, |
| <0>, <0>, <0>, <0>; |
| clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk", |
| "pcie_0_pipe_clk", "pcie_1_pipe_clk", |
| "ufs_phy_rx_symbol_0_clk", "ufs_phy_rx_symbol_1_clk", |
| "ufs_phy_tx_symbol_0_clk", |
| "usb3_phy_wrapper_gcc_usb30_pipe_clk"; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| #power-domain-cells = <1>; |
| power-domains = <&rpmhpd SC7280_CX>; |
| }; |
| |
| ipcc: mailbox@408000 { |
| compatible = "qcom,sc7280-ipcc", "qcom,ipcc"; |
| reg = <0 0x00408000 0 0x1000>; |
| interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| #mbox-cells = <2>; |
| }; |
| |
| qfprom: efuse@784000 { |
| compatible = "qcom,sc7280-qfprom", "qcom,qfprom"; |
| reg = <0 0x00784000 0 0xa20>, |
| <0 0x00780000 0 0xa20>, |
| <0 0x00782000 0 0x120>, |
| <0 0x00786000 0 0x1fff>; |
| clocks = <&gcc GCC_SEC_CTRL_CLK_SRC>; |
| clock-names = "core"; |
| power-domains = <&rpmhpd SC7280_MX>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| gpu_speed_bin: gpu_speed_bin@1e9 { |
| reg = <0x1e9 0x2>; |
| bits = <5 8>; |
| }; |
| }; |
| |
| sdhc_1: mmc@7c4000 { |
| compatible = "qcom,sc7280-sdhci", "qcom,sdhci-msm-v5"; |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&sdc1_clk>, <&sdc1_cmd>, <&sdc1_data>, <&sdc1_rclk>; |
| pinctrl-1 = <&sdc1_clk_sleep>, <&sdc1_cmd_sleep>, <&sdc1_data_sleep>, <&sdc1_rclk_sleep>; |
| status = "disabled"; |
| |
| reg = <0 0x007c4000 0 0x1000>, |
| <0 0x007c5000 0 0x1000>; |
| reg-names = "hc", "cqhci"; |
| |
| iommus = <&apps_smmu 0xc0 0x0>; |
| interrupts = <GIC_SPI 652 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 656 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "hc_irq", "pwr_irq"; |
| |
| clocks = <&gcc GCC_SDCC1_AHB_CLK>, |
| <&gcc GCC_SDCC1_APPS_CLK>, |
| <&rpmhcc RPMH_CXO_CLK>; |
| clock-names = "iface", "core", "xo"; |
| interconnects = <&aggre1_noc MASTER_SDCC_1 0 &mc_virt SLAVE_EBI1 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_SDCC_1 0>; |
| interconnect-names = "sdhc-ddr","cpu-sdhc"; |
| power-domains = <&rpmhpd SC7280_CX>; |
| operating-points-v2 = <&sdhc1_opp_table>; |
| |
| bus-width = <8>; |
| supports-cqe; |
| |
| qcom,dll-config = <0x0007642c>; |
| qcom,ddr-config = <0x80040868>; |
| |
| mmc-ddr-1_8v; |
| mmc-hs200-1_8v; |
| mmc-hs400-1_8v; |
| mmc-hs400-enhanced-strobe; |
| |
| resets = <&gcc GCC_SDCC1_BCR>; |
| |
| sdhc1_opp_table: opp-table { |
| compatible = "operating-points-v2"; |
| |
| opp-100000000 { |
| opp-hz = /bits/ 64 <100000000>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| opp-peak-kBps = <1800000 400000>; |
| opp-avg-kBps = <100000 0>; |
| }; |
| |
| opp-384000000 { |
| opp-hz = /bits/ 64 <384000000>; |
| required-opps = <&rpmhpd_opp_nom>; |
| opp-peak-kBps = <5400000 1600000>; |
| opp-avg-kBps = <390000 0>; |
| }; |
| }; |
| }; |
| |
| gpi_dma0: dma-controller@900000 { |
| #dma-cells = <3>; |
| compatible = "qcom,sc7280-gpi-dma", "qcom,sm6350-gpi-dma"; |
| reg = <0 0x00900000 0 0x60000>; |
| interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>; |
| dma-channels = <12>; |
| dma-channel-mask = <0x7f>; |
| iommus = <&apps_smmu 0x0136 0x0>; |
| status = "disabled"; |
| }; |
| |
| qupv3_id_0: geniqup@9c0000 { |
| compatible = "qcom,geni-se-qup"; |
| reg = <0 0x009c0000 0 0x2000>; |
| clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, |
| <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; |
| clock-names = "m-ahb", "s-ahb"; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| iommus = <&apps_smmu 0x123 0x0>; |
| status = "disabled"; |
| |
| i2c0: i2c@980000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0 0x00980000 0 0x4000>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; |
| clock-names = "se"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_i2c0_data_clk>; |
| interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>, |
| <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; |
| interconnect-names = "qup-core", "qup-config", |
| "qup-memory"; |
| power-domains = <&rpmhpd SC7280_CX>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, |
| <&gpi_dma0 1 0 QCOM_GPI_I2C>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| spi0: spi@980000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0 0x00980000 0 0x4000>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; |
| clock-names = "se"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>; |
| interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| power-domains = <&rpmhpd SC7280_CX>; |
| operating-points-v2 = <&qup_opp_table>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; |
| interconnect-names = "qup-core", "qup-config"; |
| dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>, |
| <&gpi_dma0 1 0 QCOM_GPI_SPI>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| uart0: serial@980000 { |
| compatible = "qcom,geni-uart"; |
| reg = <0 0x00980000 0 0x4000>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; |
| clock-names = "se"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_uart0_cts>, <&qup_uart0_rts>, <&qup_uart0_tx>, <&qup_uart0_rx>; |
| interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; |
| power-domains = <&rpmhpd SC7280_CX>; |
| operating-points-v2 = <&qup_opp_table>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; |
| interconnect-names = "qup-core", "qup-config"; |
| status = "disabled"; |
| }; |
| |
| i2c1: i2c@984000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0 0x00984000 0 0x4000>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; |
| clock-names = "se"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_i2c1_data_clk>; |
| interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>, |
| <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; |
| interconnect-names = "qup-core", "qup-config", |
| "qup-memory"; |
| power-domains = <&rpmhpd SC7280_CX>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, |
| <&gpi_dma0 1 1 QCOM_GPI_I2C>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| spi1: spi@984000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0 0x00984000 0 0x4000>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; |
| clock-names = "se"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>; |
| interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| power-domains = <&rpmhpd SC7280_CX>; |
| operating-points-v2 = <&qup_opp_table>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; |
| interconnect-names = "qup-core", "qup-config"; |
| dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>, |
| <&gpi_dma0 1 1 QCOM_GPI_SPI>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| uart1: serial@984000 { |
| compatible = "qcom,geni-uart"; |
| reg = <0 0x00984000 0 0x4000>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; |
| clock-names = "se"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_uart1_cts>, <&qup_uart1_rts>, <&qup_uart1_tx>, <&qup_uart1_rx>; |
| interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; |
| power-domains = <&rpmhpd SC7280_CX>; |
| operating-points-v2 = <&qup_opp_table>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; |
| interconnect-names = "qup-core", "qup-config"; |
| status = "disabled"; |
| }; |
| |
| i2c2: i2c@988000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0 0x00988000 0 0x4000>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; |
| clock-names = "se"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_i2c2_data_clk>; |
| interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>, |
| <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; |
| interconnect-names = "qup-core", "qup-config", |
| "qup-memory"; |
| power-domains = <&rpmhpd SC7280_CX>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, |
| <&gpi_dma0 1 2 QCOM_GPI_I2C>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| spi2: spi@988000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0 0x00988000 0 0x4000>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; |
| clock-names = "se"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>; |
| interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| power-domains = <&rpmhpd SC7280_CX>; |
| operating-points-v2 = <&qup_opp_table>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; |
| interconnect-names = "qup-core", "qup-config"; |
| dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>, |
| <&gpi_dma0 1 2 QCOM_GPI_SPI>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| uart2: serial@988000 { |
| compatible = "qcom,geni-uart"; |
| reg = <0 0x00988000 0 0x4000>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; |
| clock-names = "se"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_uart2_cts>, <&qup_uart2_rts>, <&qup_uart2_tx>, <&qup_uart2_rx>; |
| interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; |
| power-domains = <&rpmhpd SC7280_CX>; |
| operating-points-v2 = <&qup_opp_table>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; |
| interconnect-names = "qup-core", "qup-config"; |
| status = "disabled"; |
| }; |
| |
| i2c3: i2c@98c000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0 0x0098c000 0 0x4000>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; |
| clock-names = "se"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_i2c3_data_clk>; |
| interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>, |
| <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; |
| interconnect-names = "qup-core", "qup-config", |
| "qup-memory"; |
| power-domains = <&rpmhpd SC7280_CX>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>, |
| <&gpi_dma0 1 3 QCOM_GPI_I2C>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| spi3: spi@98c000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0 0x0098c000 0 0x4000>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; |
| clock-names = "se"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>; |
| interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| power-domains = <&rpmhpd SC7280_CX>; |
| operating-points-v2 = <&qup_opp_table>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; |
| interconnect-names = "qup-core", "qup-config"; |
| dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>, |
| <&gpi_dma0 1 3 QCOM_GPI_SPI>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| uart3: serial@98c000 { |
| compatible = "qcom,geni-uart"; |
| reg = <0 0x0098c000 0 0x4000>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; |
| clock-names = "se"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_uart3_cts>, <&qup_uart3_rts>, <&qup_uart3_tx>, <&qup_uart3_rx>; |
| interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; |
| power-domains = <&rpmhpd SC7280_CX>; |
| operating-points-v2 = <&qup_opp_table>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; |
| interconnect-names = "qup-core", "qup-config"; |
| status = "disabled"; |
| }; |
| |
| i2c4: i2c@990000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0 0x00990000 0 0x4000>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; |
| clock-names = "se"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_i2c4_data_clk>; |
| interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>, |
| <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; |
| interconnect-names = "qup-core", "qup-config", |
| "qup-memory"; |
| power-domains = <&rpmhpd SC7280_CX>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>, |
| <&gpi_dma0 1 4 QCOM_GPI_I2C>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| spi4: spi@990000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0 0x00990000 0 0x4000>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; |
| clock-names = "se"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>; |
| interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| power-domains = <&rpmhpd SC7280_CX>; |
| operating-points-v2 = <&qup_opp_table>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; |
| interconnect-names = "qup-core", "qup-config"; |
| dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>, |
| <&gpi_dma0 1 4 QCOM_GPI_SPI>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| uart4: serial@990000 { |
| compatible = "qcom,geni-uart"; |
| reg = <0 0x00990000 0 0x4000>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; |
| clock-names = "se"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_uart4_cts>, <&qup_uart4_rts>, <&qup_uart4_tx>, <&qup_uart4_rx>; |
| interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; |
| power-domains = <&rpmhpd SC7280_CX>; |
| operating-points-v2 = <&qup_opp_table>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; |
| interconnect-names = "qup-core", "qup-config"; |
| status = "disabled"; |
| }; |
| |
| i2c5: i2c@994000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0 0x00994000 0 0x4000>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; |
| clock-names = "se"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_i2c5_data_clk>; |
| interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>, |
| <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; |
| interconnect-names = "qup-core", "qup-config", |
| "qup-memory"; |
| power-domains = <&rpmhpd SC7280_CX>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>, |
| <&gpi_dma0 1 5 QCOM_GPI_I2C>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| spi5: spi@994000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0 0x00994000 0 0x4000>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; |
| clock-names = "se"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>; |
| interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| power-domains = <&rpmhpd SC7280_CX>; |
| operating-points-v2 = <&qup_opp_table>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; |
| interconnect-names = "qup-core", "qup-config"; |
| dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>, |
| <&gpi_dma0 1 5 QCOM_GPI_SPI>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| uart5: serial@994000 { |
| compatible = "qcom,geni-uart"; |
| reg = <0 0x00994000 0 0x4000>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; |
| clock-names = "se"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_uart5_cts>, <&qup_uart5_rts>, <&qup_uart5_tx>, <&qup_uart5_rx>; |
| interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; |
| power-domains = <&rpmhpd SC7280_CX>; |
| operating-points-v2 = <&qup_opp_table>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; |
| interconnect-names = "qup-core", "qup-config"; |
| status = "disabled"; |
| }; |
| |
| i2c6: i2c@998000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0 0x00998000 0 0x4000>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; |
| clock-names = "se"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_i2c6_data_clk>; |
| interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>, |
| <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; |
| interconnect-names = "qup-core", "qup-config", |
| "qup-memory"; |
| power-domains = <&rpmhpd SC7280_CX>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>, |
| <&gpi_dma0 1 6 QCOM_GPI_I2C>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| spi6: spi@998000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0 0x00998000 0 0x4000>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; |
| clock-names = "se"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>; |
| interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| power-domains = <&rpmhpd SC7280_CX>; |
| operating-points-v2 = <&qup_opp_table>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; |
| interconnect-names = "qup-core", "qup-config"; |
| dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>, |
| <&gpi_dma0 1 6 QCOM_GPI_SPI>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| uart6: serial@998000 { |
| compatible = "qcom,geni-uart"; |
| reg = <0 0x00998000 0 0x4000>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; |
| clock-names = "se"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_uart6_cts>, <&qup_uart6_rts>, <&qup_uart6_tx>, <&qup_uart6_rx>; |
| interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; |
| power-domains = <&rpmhpd SC7280_CX>; |
| operating-points-v2 = <&qup_opp_table>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; |
| interconnect-names = "qup-core", "qup-config"; |
| status = "disabled"; |
| }; |
| |
| i2c7: i2c@99c000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0 0x0099c000 0 0x4000>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; |
| clock-names = "se"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_i2c7_data_clk>; |
| interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>, |
| <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; |
| interconnect-names = "qup-core", "qup-config", |
| "qup-memory"; |
| power-domains = <&rpmhpd SC7280_CX>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>, |
| <&gpi_dma0 1 7 QCOM_GPI_I2C>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| spi7: spi@99c000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0 0x0099c000 0 0x4000>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; |
| clock-names = "se"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_spi7_data_clk>, <&qup_spi7_cs>; |
| interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| power-domains = <&rpmhpd SC7280_CX>; |
| operating-points-v2 = <&qup_opp_table>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; |
| interconnect-names = "qup-core", "qup-config"; |
| dmas = <&gpi_dma0 0 7 QCOM_GPI_SPI>, |
| <&gpi_dma0 1 7 QCOM_GPI_SPI>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| uart7: serial@99c000 { |
| compatible = "qcom,geni-uart"; |
| reg = <0 0x0099c000 0 0x4000>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; |
| clock-names = "se"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_uart7_cts>, <&qup_uart7_rts>, <&qup_uart7_tx>, <&qup_uart7_rx>; |
| interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; |
| power-domains = <&rpmhpd SC7280_CX>; |
| operating-points-v2 = <&qup_opp_table>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; |
| interconnect-names = "qup-core", "qup-config"; |
| status = "disabled"; |
| }; |
| }; |
| |
| gpi_dma1: dma-controller@a00000 { |
| #dma-cells = <3>; |
| compatible = "qcom,sc7280-gpi-dma", "qcom,sm6350-gpi-dma"; |
| reg = <0 0x00a00000 0 0x60000>; |
| interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>; |
| dma-channels = <12>; |
| dma-channel-mask = <0x1e>; |
| iommus = <&apps_smmu 0x56 0x0>; |
| status = "disabled"; |
| }; |
| |
| qupv3_id_1: geniqup@ac0000 { |
| compatible = "qcom,geni-se-qup"; |
| reg = <0 0x00ac0000 0 0x2000>; |
| clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, |
| <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; |
| clock-names = "m-ahb", "s-ahb"; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| iommus = <&apps_smmu 0x43 0x0>; |
| status = "disabled"; |
| |
| i2c8: i2c@a80000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0 0x00a80000 0 0x4000>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; |
| clock-names = "se"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_i2c8_data_clk>; |
| interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>, |
| <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; |
| interconnect-names = "qup-core", "qup-config", |
| "qup-memory"; |
| power-domains = <&rpmhpd SC7280_CX>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>, |
| <&gpi_dma1 1 0 QCOM_GPI_I2C>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| spi8: spi@a80000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0 0x00a80000 0 0x4000>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; |
| clock-names = "se"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>; |
| interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| power-domains = <&rpmhpd SC7280_CX>; |
| operating-points-v2 = <&qup_opp_table>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; |
| interconnect-names = "qup-core", "qup-config"; |
| dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>, |
| <&gpi_dma1 1 0 QCOM_GPI_SPI>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| uart8: serial@a80000 { |
| compatible = "qcom,geni-uart"; |
| reg = <0 0x00a80000 0 0x4000>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; |
| clock-names = "se"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_uart8_cts>, <&qup_uart8_rts>, <&qup_uart8_tx>, <&qup_uart8_rx>; |
| interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; |
| power-domains = <&rpmhpd SC7280_CX>; |
| operating-points-v2 = <&qup_opp_table>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; |
| interconnect-names = "qup-core", "qup-config"; |
| status = "disabled"; |
| }; |
| |
| i2c9: i2c@a84000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0 0x00a84000 0 0x4000>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; |
| clock-names = "se"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_i2c9_data_clk>; |
| interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>, |
| <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; |
| interconnect-names = "qup-core", "qup-config", |
| "qup-memory"; |
| power-domains = <&rpmhpd SC7280_CX>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>, |
| <&gpi_dma1 1 1 QCOM_GPI_I2C>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| spi9: spi@a84000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0 0x00a84000 0 0x4000>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; |
| clock-names = "se"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>; |
| interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| power-domains = <&rpmhpd SC7280_CX>; |
| operating-points-v2 = <&qup_opp_table>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; |
| interconnect-names = "qup-core", "qup-config"; |
| dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>, |
| <&gpi_dma1 1 1 QCOM_GPI_SPI>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| uart9: serial@a84000 { |
| compatible = "qcom,geni-uart"; |
| reg = <0 0x00a84000 0 0x4000>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; |
| clock-names = "se"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_uart9_cts>, <&qup_uart9_rts>, <&qup_uart9_tx>, <&qup_uart9_rx>; |
| interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; |
| power-domains = <&rpmhpd SC7280_CX>; |
| operating-points-v2 = <&qup_opp_table>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; |
| interconnect-names = "qup-core", "qup-config"; |
| status = "disabled"; |
| }; |
| |
| i2c10: i2c@a88000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0 0x00a88000 0 0x4000>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; |
| clock-names = "se"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_i2c10_data_clk>; |
| interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>, |
| <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; |
| interconnect-names = "qup-core", "qup-config", |
| "qup-memory"; |
| power-domains = <&rpmhpd SC7280_CX>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>, |
| <&gpi_dma1 1 2 QCOM_GPI_I2C>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| spi10: spi@a88000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0 0x00a88000 0 0x4000>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; |
| clock-names = "se"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>; |
| interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| power-domains = <&rpmhpd SC7280_CX>; |
| operating-points-v2 = <&qup_opp_table>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; |
| interconnect-names = "qup-core", "qup-config"; |
| dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>, |
| <&gpi_dma1 1 2 QCOM_GPI_SPI>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| uart10: serial@a88000 { |
| compatible = "qcom,geni-uart"; |
| reg = <0 0x00a88000 0 0x4000>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; |
| clock-names = "se"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_uart10_cts>, <&qup_uart10_rts>, <&qup_uart10_tx>, <&qup_uart10_rx>; |
| interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; |
| power-domains = <&rpmhpd SC7280_CX>; |
| operating-points-v2 = <&qup_opp_table>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; |
| interconnect-names = "qup-core", "qup-config"; |
| status = "disabled"; |
| }; |
| |
| i2c11: i2c@a8c000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0 0x00a8c000 0 0x4000>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; |
| clock-names = "se"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_i2c11_data_clk>; |
| interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>, |
| <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; |
| interconnect-names = "qup-core", "qup-config", |
| "qup-memory"; |
| power-domains = <&rpmhpd SC7280_CX>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>, |
| <&gpi_dma1 1 3 QCOM_GPI_I2C>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| spi11: spi@a8c000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0 0x00a8c000 0 0x4000>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; |
| clock-names = "se"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>; |
| interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| power-domains = <&rpmhpd SC7280_CX>; |
| operating-points-v2 = <&qup_opp_table>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; |
| interconnect-names = "qup-core", "qup-config"; |
| dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>, |
| <&gpi_dma1 1 3 QCOM_GPI_SPI>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| uart11: serial@a8c000 { |
| compatible = "qcom,geni-uart"; |
| reg = <0 0x00a8c000 0 0x4000>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; |
| clock-names = "se"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_uart11_cts>, <&qup_uart11_rts>, <&qup_uart11_tx>, <&qup_uart11_rx>; |
| interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; |
| power-domains = <&rpmhpd SC7280_CX>; |
| operating-points-v2 = <&qup_opp_table>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; |
| interconnect-names = "qup-core", "qup-config"; |
| status = "disabled"; |
| }; |
| |
| i2c12: i2c@a90000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0 0x00a90000 0 0x4000>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; |
| clock-names = "se"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_i2c12_data_clk>; |
| interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>, |
| <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; |
| interconnect-names = "qup-core", "qup-config", |
| "qup-memory"; |
| power-domains = <&rpmhpd SC7280_CX>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>, |
| <&gpi_dma1 1 4 QCOM_GPI_I2C>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| spi12: spi@a90000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0 0x00a90000 0 0x4000>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; |
| clock-names = "se"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>; |
| interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| power-domains = <&rpmhpd SC7280_CX>; |
| operating-points-v2 = <&qup_opp_table>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; |
| interconnect-names = "qup-core", "qup-config"; |
| dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>, |
| <&gpi_dma1 1 4 QCOM_GPI_SPI>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| uart12: serial@a90000 { |
| compatible = "qcom,geni-uart"; |
| reg = <0 0x00a90000 0 0x4000>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; |
| clock-names = "se"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_uart12_cts>, <&qup_uart12_rts>, <&qup_uart12_tx>, <&qup_uart12_rx>; |
| interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; |
| power-domains = <&rpmhpd SC7280_CX>; |
| operating-points-v2 = <&qup_opp_table>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; |
| interconnect-names = "qup-core", "qup-config"; |
| status = "disabled"; |
| }; |
| |
| i2c13: i2c@a94000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0 0x00a94000 0 0x4000>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; |
| clock-names = "se"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_i2c13_data_clk>; |
| interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>, |
| <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; |
| interconnect-names = "qup-core", "qup-config", |
| "qup-memory"; |
| power-domains = <&rpmhpd SC7280_CX>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>, |
| <&gpi_dma1 1 5 QCOM_GPI_I2C>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| spi13: spi@a94000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0 0x00a94000 0 0x4000>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; |
| clock-names = "se"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>; |
| interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| power-domains = <&rpmhpd SC7280_CX>; |
| operating-points-v2 = <&qup_opp_table>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; |
| interconnect-names = "qup-core", "qup-config"; |
| dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>, |
| <&gpi_dma1 1 5 QCOM_GPI_SPI>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| uart13: serial@a94000 { |
| compatible = "qcom,geni-uart"; |
| reg = <0 0x00a94000 0 0x4000>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; |
| clock-names = "se"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_uart13_cts>, <&qup_uart13_rts>, <&qup_uart13_tx>, <&qup_uart13_rx>; |
| interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; |
| power-domains = <&rpmhpd SC7280_CX>; |
| operating-points-v2 = <&qup_opp_table>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; |
| interconnect-names = "qup-core", "qup-config"; |
| status = "disabled"; |
| }; |
| |
| i2c14: i2c@a98000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0 0x00a98000 0 0x4000>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; |
| clock-names = "se"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_i2c14_data_clk>; |
| interrupts = <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>, |
| <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; |
| interconnect-names = "qup-core", "qup-config", |
| "qup-memory"; |
| power-domains = <&rpmhpd SC7280_CX>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>, |
| <&gpi_dma1 1 6 QCOM_GPI_I2C>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| spi14: spi@a98000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0 0x00a98000 0 0x4000>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; |
| clock-names = "se"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs>; |
| interrupts = <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| power-domains = <&rpmhpd SC7280_CX>; |
| operating-points-v2 = <&qup_opp_table>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; |
| interconnect-names = "qup-core", "qup-config"; |
| dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>, |
| <&gpi_dma1 1 6 QCOM_GPI_SPI>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| uart14: serial@a98000 { |
| compatible = "qcom,geni-uart"; |
| reg = <0 0x00a98000 0 0x4000>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; |
| clock-names = "se"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_uart14_cts>, <&qup_uart14_rts>, <&qup_uart14_tx>, <&qup_uart14_rx>; |
| interrupts = <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>; |
| power-domains = <&rpmhpd SC7280_CX>; |
| operating-points-v2 = <&qup_opp_table>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; |
| interconnect-names = "qup-core", "qup-config"; |
| status = "disabled"; |
| }; |
| |
| i2c15: i2c@a9c000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0 0x00a9c000 0 0x4000>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; |
| clock-names = "se"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_i2c15_data_clk>; |
| interrupts = <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>, |
| <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; |
| interconnect-names = "qup-core", "qup-config", |
| "qup-memory"; |
| power-domains = <&rpmhpd SC7280_CX>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>, |
| <&gpi_dma1 1 7 QCOM_GPI_I2C>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| spi15: spi@a9c000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0 0x00a9c000 0 0x4000>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; |
| clock-names = "se"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>; |
| interrupts = <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| power-domains = <&rpmhpd SC7280_CX>; |
| operating-points-v2 = <&qup_opp_table>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; |
| interconnect-names = "qup-core", "qup-config"; |
| dmas = <&gpi_dma1 0 7 QCOM_GPI_SPI>, |
| <&gpi_dma1 1 7 QCOM_GPI_SPI>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| uart15: serial@a9c000 { |
| compatible = "qcom,geni-uart"; |
| reg = <0 0x00a9c000 0 0x4000>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; |
| clock-names = "se"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_uart15_cts>, <&qup_uart15_rts>, <&qup_uart15_tx>, <&qup_uart15_rx>; |
| interrupts = <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>; |
| power-domains = <&rpmhpd SC7280_CX>; |
| operating-points-v2 = <&qup_opp_table>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; |
| interconnect-names = "qup-core", "qup-config"; |
| status = "disabled"; |
| }; |
| }; |
| |
| cnoc2: interconnect@1500000 { |
| reg = <0 0x01500000 0 0x1000>; |
| compatible = "qcom,sc7280-cnoc2"; |
| #interconnect-cells = <2>; |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| }; |
| |
| cnoc3: interconnect@1502000 { |
| reg = <0 0x01502000 0 0x1000>; |
| compatible = "qcom,sc7280-cnoc3"; |
| #interconnect-cells = <2>; |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| }; |
| |
| mc_virt: interconnect@1580000 { |
| reg = <0 0x01580000 0 0x4>; |
| compatible = "qcom,sc7280-mc-virt"; |
| #interconnect-cells = <2>; |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| }; |
| |
| system_noc: interconnect@1680000 { |
| reg = <0 0x01680000 0 0x15480>; |
| compatible = "qcom,sc7280-system-noc"; |
| #interconnect-cells = <2>; |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| }; |
| |
| aggre1_noc: interconnect@16e0000 { |
| compatible = "qcom,sc7280-aggre1-noc"; |
| reg = <0 0x016e0000 0 0x1c080>; |
| #interconnect-cells = <2>; |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| }; |
| |
| aggre2_noc: interconnect@1700000 { |
| reg = <0 0x01700000 0 0x2b080>; |
| compatible = "qcom,sc7280-aggre2-noc"; |
| #interconnect-cells = <2>; |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| }; |
| |
| mmss_noc: interconnect@1740000 { |
| reg = <0 0x01740000 0 0x1e080>; |
| compatible = "qcom,sc7280-mmss-noc"; |
| #interconnect-cells = <2>; |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| }; |
| |
| wifi: wifi@17a10040 { |
| compatible = "qcom,wcn6750-wifi"; |
| reg = <0 0x17a10040 0 0x0>; |
| iommus = <&apps_smmu 0x1c00 0x1>; |
| interrupts = <GIC_SPI 768 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 769 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 770 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 771 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 772 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 773 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 774 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 775 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 776 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 777 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 778 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 779 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 780 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 781 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 782 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 783 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 784 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 785 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 786 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 787 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 788 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 789 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 790 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 791 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 792 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 793 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 794 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 795 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 796 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 797 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 798 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 799 IRQ_TYPE_EDGE_RISING>; |
| qcom,rproc = <&remoteproc_wpss>; |
| memory-region = <&wlan_fw_mem>, <&wlan_ce_mem>; |
| status = "disabled"; |
| qcom,smem-states = <&wlan_smp2p_out 0>; |
| qcom,smem-state-names = "wlan-smp2p-out"; |
| }; |
| |
| pcie1: pci@1c08000 { |
| compatible = "qcom,pcie-sc7280"; |
| reg = <0 0x01c08000 0 0x3000>, |
| <0 0x40000000 0 0xf1d>, |
| <0 0x40000f20 0 0xa8>, |
| <0 0x40001000 0 0x1000>, |
| <0 0x40100000 0 0x100000>; |
| |
| reg-names = "parf", "dbi", "elbi", "atu", "config"; |
| device_type = "pci"; |
| linux,pci-domain = <1>; |
| bus-range = <0x00 0xff>; |
| num-lanes = <2>; |
| |
| #address-cells = <3>; |
| #size-cells = <2>; |
| |
| ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>, |
| <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; |
| |
| interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "msi"; |
| #interrupt-cells = <1>; |
| interrupt-map-mask = <0 0 0 0x7>; |
| interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>; |
| |
| clocks = <&gcc GCC_PCIE_1_PIPE_CLK>, |
| <&gcc GCC_PCIE_1_PIPE_CLK_SRC>, |
| <&pcie1_lane>, |
| <&rpmhcc RPMH_CXO_CLK>, |
| <&gcc GCC_PCIE_1_AUX_CLK>, |
| <&gcc GCC_PCIE_1_CFG_AHB_CLK>, |
| <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, |
| <&gcc GCC_PCIE_1_SLV_AXI_CLK>, |
| <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>, |
| <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>, |
| <&gcc GCC_DDRSS_PCIE_SF_CLK>, |
| <&gcc GCC_AGGRE_NOC_PCIE_CENTER_SF_AXI_CLK>, |
| <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>; |
| |
| clock-names = "pipe", |
| "pipe_mux", |
| "phy_pipe", |
| "ref", |
| "aux", |
| "cfg", |
| "bus_master", |
| "bus_slave", |
| "slave_q2a", |
| "tbu", |
| "ddrss_sf_tbu", |
| "aggre0", |
| "aggre1"; |
| |
| assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>; |
| assigned-clock-rates = <19200000>; |
| |
| resets = <&gcc GCC_PCIE_1_BCR>; |
| reset-names = "pci"; |
| |
| power-domains = <&gcc GCC_PCIE_1_GDSC>; |
| |
| phys = <&pcie1_lane>; |
| phy-names = "pciephy"; |
| |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pcie1_clkreq_n>; |
| |
| dma-coherent; |
| |
| iommu-map = <0x0 &apps_smmu 0x1c80 0x1>, |
| <0x100 &apps_smmu 0x1c81 0x1>; |
| |
| status = "disabled"; |
| }; |
| |
| pcie1_phy: phy@1c0e000 { |
| compatible = "qcom,sm8250-qmp-gen3x2-pcie-phy"; |
| reg = <0 0x01c0e000 0 0x1c0>; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| clocks = <&gcc GCC_PCIE_1_AUX_CLK>, |
| <&gcc GCC_PCIE_1_CFG_AHB_CLK>, |
| <&gcc GCC_PCIE_CLKREF_EN>, |
| <&gcc GCC_PCIE1_PHY_RCHNG_CLK>; |
| clock-names = "aux", "cfg_ahb", "ref", "refgen"; |
| |
| resets = <&gcc GCC_PCIE_1_PHY_BCR>; |
| reset-names = "phy"; |
| |
| assigned-clocks = <&gcc GCC_PCIE1_PHY_RCHNG_CLK>; |
| assigned-clock-rates = <100000000>; |
| |
| status = "disabled"; |
| |
| pcie1_lane: phy@1c0e200 { |
| reg = <0 0x01c0e200 0 0x170>, |
| <0 0x01c0e400 0 0x200>, |
| <0 0x01c0ea00 0 0x1f0>, |
| <0 0x01c0e600 0 0x170>, |
| <0 0x01c0e800 0 0x200>, |
| <0 0x01c0ee00 0 0xf4>; |
| clocks = <&gcc GCC_PCIE_1_PIPE_CLK>; |
| clock-names = "pipe0"; |
| |
| #phy-cells = <0>; |
| #clock-cells = <0>; |
| clock-output-names = "pcie_1_pipe_clk"; |
| }; |
| }; |
| |
| ipa: ipa@1e40000 { |
| compatible = "qcom,sc7280-ipa"; |
| |
| iommus = <&apps_smmu 0x480 0x0>, |
| <&apps_smmu 0x482 0x0>; |
| reg = <0 0x01e40000 0 0x8000>, |
| <0 0x01e50000 0 0x4ad0>, |
| <0 0x01e04000 0 0x23000>; |
| reg-names = "ipa-reg", |
| "ipa-shared", |
| "gsi"; |
| |
| interrupts-extended = <&intc GIC_SPI 654 IRQ_TYPE_EDGE_RISING>, |
| <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>, |
| <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, |
| <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>; |
| interrupt-names = "ipa", |
| "gsi", |
| "ipa-clock-query", |
| "ipa-setup-ready"; |
| |
| clocks = <&rpmhcc RPMH_IPA_CLK>; |
| clock-names = "core"; |
| |
| interconnects = <&aggre2_noc MASTER_IPA 0 &mc_virt SLAVE_EBI1 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_IPA_CFG 0>; |
| interconnect-names = "memory", |
| "config"; |
| |
| qcom,qmp = <&aoss_qmp>; |
| |
| qcom,smem-states = <&ipa_smp2p_out 0>, |
| <&ipa_smp2p_out 1>; |
| qcom,smem-state-names = "ipa-clock-enabled-valid", |
| "ipa-clock-enabled"; |
| |
| status = "disabled"; |
| }; |
| |
| tcsr_mutex: hwlock@1f40000 { |
| compatible = "qcom,tcsr-mutex"; |
| reg = <0 0x01f40000 0 0x20000>; |
| #hwlock-cells = <1>; |
| }; |
| |
| tcsr_1: syscon@1f60000 { |
| compatible = "qcom,sc7280-tcsr", "syscon"; |
| reg = <0 0x01f60000 0 0x20000>; |
| }; |
| |
| tcsr_2: syscon@1fc0000 { |
| compatible = "qcom,sc7280-tcsr", "syscon"; |
| reg = <0 0x01fc0000 0 0x30000>; |
| }; |
| |
| lpasscc: lpasscc@3000000 { |
| compatible = "qcom,sc7280-lpasscc"; |
| reg = <0 0x03000000 0 0x40>, |
| <0 0x03c04000 0 0x4>; |
| reg-names = "qdsp6ss", "top_cc"; |
| clocks = <&gcc GCC_CFG_NOC_LPASS_CLK>; |
| clock-names = "iface"; |
| #clock-cells = <1>; |
| }; |
| |
| lpass_rx_macro: codec@3200000 { |
| compatible = "qcom,sc7280-lpass-rx-macro"; |
| reg = <0 0x03200000 0 0x1000>; |
| |
| pinctrl-names = "default"; |
| pinctrl-0 = <&lpass_rx_swr_clk>, <&lpass_rx_swr_data>; |
| |
| clocks = <&lpass_aon LPASS_AON_CC_TX_MCLK_CLK>, |
| <&lpass_aon LPASS_AON_CC_TX_MCLK_2X_CLK>, |
| <&lpass_va_macro>; |
| clock-names = "mclk", "npl", "fsgen"; |
| |
| power-domains = <&lpass_hm LPASS_CORE_CC_LPASS_CORE_HM_GDSC>, |
| <&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>; |
| power-domain-names = "macro", "dcodec"; |
| |
| #clock-cells = <0>; |
| #sound-dai-cells = <1>; |
| |
| status = "disabled"; |
| }; |
| |
| swr0: soundwire@3210000 { |
| compatible = "qcom,soundwire-v1.6.0"; |
| reg = <0 0x03210000 0 0x2000>; |
| |
| interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&lpass_rx_macro>; |
| clock-names = "iface"; |
| |
| qcom,din-ports = <0>; |
| qcom,dout-ports = <5>; |
| |
| resets = <&lpass_audiocc LPASS_AUDIO_SWR_RX_CGCR>; |
| reset-names = "swr_audio_cgcr"; |
| |
| qcom,ports-word-length = /bits/ 8 <0x01 0x07 0x04 0xff 0xff>; |
| qcom,ports-sinterval-low = /bits/ 8 <0x03 0x3f 0x1f 0x03 0x03>; |
| qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0b 0x01 0x01>; |
| qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0b 0x00 0x00>; |
| qcom,ports-lane-control = /bits/ 8 <0x01 0x00 0x00 0x00 0x00>; |
| qcom,ports-block-pack-mode = /bits/ 8 <0xff 0x00 0x01 0xff 0xff>; |
| qcom,ports-hstart = /bits/ 8 <0xff 0x03 0xff 0xff 0xff>; |
| qcom,ports-hstop = /bits/ 8 <0xff 0x06 0xff 0xff 0xff>; |
| qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0x00>; |
| |
| #sound-dai-cells = <1>; |
| #address-cells = <2>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| lpass_tx_macro: codec@3220000 { |
| compatible = "qcom,sc7280-lpass-tx-macro"; |
| reg = <0 0x03220000 0 0x1000>; |
| |
| pinctrl-names = "default"; |
| pinctrl-0 = <&lpass_tx_swr_clk>, <&lpass_tx_swr_data>; |
| |
| clocks = <&lpass_aon LPASS_AON_CC_TX_MCLK_CLK>, |
| <&lpass_aon LPASS_AON_CC_TX_MCLK_2X_CLK>, |
| <&lpass_va_macro>; |
| clock-names = "mclk", "npl", "fsgen"; |
| |
| power-domains = <&lpass_hm LPASS_CORE_CC_LPASS_CORE_HM_GDSC>, |
| <&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>; |
| power-domain-names = "macro", "dcodec"; |
| |
| #clock-cells = <0>; |
| #sound-dai-cells = <1>; |
| |
| status = "disabled"; |
| }; |
| |
| swr1: soundwire@3230000 { |
| compatible = "qcom,soundwire-v1.6.0"; |
| reg = <0 0x03230000 0 0x2000>; |
| |
| interrupts-extended = <&intc GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>, |
| <&pdc 130 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&lpass_tx_macro>; |
| clock-names = "iface"; |
| |
| qcom,din-ports = <3>; |
| qcom,dout-ports = <0>; |
| |
| resets = <&lpass_audiocc LPASS_AUDIO_SWR_TX_CGCR>; |
| reset-names = "swr_audio_cgcr"; |
| |
| qcom,ports-sinterval-low = /bits/ 8 <0x01 0x03 0x03>; |
| qcom,ports-offset1 = /bits/ 8 <0x01 0x00 0x02>; |
| qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x00>; |
| qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff>; |
| qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff>; |
| qcom,ports-word-length = /bits/ 8 <0xff 0x00 0xff>; |
| qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0xff>; |
| qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff>; |
| qcom,ports-lane-control = /bits/ 8 <0x00 0x01 0x00>; |
| |
| #sound-dai-cells = <1>; |
| #address-cells = <2>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| lpass_audiocc: clock-controller@3300000 { |
| compatible = "qcom,sc7280-lpassaudiocc"; |
| reg = <0 0x03300000 0 0x30000>, |
| <0 0x032a9000 0 0x1000>; |
| clocks = <&rpmhcc RPMH_CXO_CLK>, |
| <&lpass_aon LPASS_AON_CC_MAIN_RCG_CLK_SRC>; |
| clock-names = "bi_tcxo", "lpass_aon_cc_main_rcg_clk_src"; |
| power-domains = <&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>; |
| #clock-cells = <1>; |
| #power-domain-cells = <1>; |
| #reset-cells = <1>; |
| }; |
| |
| lpass_va_macro: codec@3370000 { |
| compatible = "qcom,sc7280-lpass-va-macro"; |
| reg = <0 0x03370000 0 0x1000>; |
| |
| pinctrl-names = "default"; |
| pinctrl-0 = <&lpass_dmic01_clk>, <&lpass_dmic01_data>; |
| |
| clocks = <&lpass_aon LPASS_AON_CC_TX_MCLK_CLK>; |
| clock-names = "mclk"; |
| |
| power-domains = <&lpass_hm LPASS_CORE_CC_LPASS_CORE_HM_GDSC>, |
| <&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>; |
| power-domain-names = "macro", "dcodec"; |
| |
| #clock-cells = <0>; |
| #sound-dai-cells = <1>; |
| |
| status = "disabled"; |
| }; |
| |
| lpass_aon: clock-controller@3380000 { |
| compatible = "qcom,sc7280-lpassaoncc"; |
| reg = <0 0x03380000 0 0x30000>; |
| clocks = <&rpmhcc RPMH_CXO_CLK>, |
| <&rpmhcc RPMH_CXO_CLK_A>, |
| <&lpass_core LPASS_CORE_CC_CORE_CLK>; |
| clock-names = "bi_tcxo", "bi_tcxo_ao", "iface"; |
| #clock-cells = <1>; |
| #power-domain-cells = <1>; |
| }; |
| |
| lpass_core: clock-controller@3900000 { |
| compatible = "qcom,sc7280-lpasscorecc"; |
| reg = <0 0x03900000 0 0x50000>; |
| clocks = <&rpmhcc RPMH_CXO_CLK>; |
| clock-names = "bi_tcxo"; |
| power-domains = <&lpass_hm LPASS_CORE_CC_LPASS_CORE_HM_GDSC>; |
| #clock-cells = <1>; |
| #power-domain-cells = <1>; |
| }; |
| |
| lpass_cpu: audio@3987000 { |
| compatible = "qcom,sc7280-lpass-cpu"; |
| |
| reg = <0 0x03987000 0 0x68000>, |
| <0 0x03b00000 0 0x29000>, |
| <0 0x03260000 0 0xc000>, |
| <0 0x03280000 0 0x29000>, |
| <0 0x03340000 0 0x29000>, |
| <0 0x0336c000 0 0x3000>; |
| reg-names = "lpass-hdmiif", |
| "lpass-lpaif", |
| "lpass-rxtx-cdc-dma-lpm", |
| "lpass-rxtx-lpaif", |
| "lpass-va-lpaif", |
| "lpass-va-cdc-dma-lpm"; |
| |
| iommus = <&apps_smmu 0x1820 0>, |
| <&apps_smmu 0x1821 0>, |
| <&apps_smmu 0x1832 0>; |
| |
| power-domains = <&rpmhpd SC7280_LCX>; |
| power-domain-names = "lcx"; |
| required-opps = <&rpmhpd_opp_nom>; |
| |
| clocks = <&lpass_aon LPASS_AON_CC_AUDIO_HM_H_CLK>, |
| <&lpass_core LPASS_CORE_CC_EXT_MCLK0_CLK>, |
| <&lpass_core LPASS_CORE_CC_SYSNOC_MPORT_CORE_CLK>, |
| <&lpass_core LPASS_CORE_CC_EXT_IF0_IBIT_CLK>, |
| <&lpass_core LPASS_CORE_CC_EXT_IF1_IBIT_CLK>, |
| <&lpass_audiocc LPASS_AUDIO_CC_CODEC_MEM_CLK>, |
| <&lpass_audiocc LPASS_AUDIO_CC_CODEC_MEM0_CLK>, |
| <&lpass_audiocc LPASS_AUDIO_CC_CODEC_MEM1_CLK>, |
| <&lpass_audiocc LPASS_AUDIO_CC_CODEC_MEM2_CLK>, |
| <&lpass_aon LPASS_AON_CC_VA_MEM0_CLK>; |
| clock-names = "aon_cc_audio_hm_h", |
| "audio_cc_ext_mclk0", |
| "core_cc_sysnoc_mport_core", |
| "core_cc_ext_if0_ibit", |
| "core_cc_ext_if1_ibit", |
| "audio_cc_codec_mem", |
| "audio_cc_codec_mem0", |
| "audio_cc_codec_mem1", |
| "audio_cc_codec_mem2", |
| "aon_cc_va_mem0"; |
| |
| #sound-dai-cells = <1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "lpass-irq-lpaif", |
| "lpass-irq-hdmi", |
| "lpass-irq-vaif", |
| "lpass-irq-rxtxif"; |
| |
| status = "disabled"; |
| }; |
| |
| lpass_hm: clock-controller@3c00000 { |
| compatible = "qcom,sc7280-lpasshm"; |
| reg = <0 0x03c00000 0 0x28>; |
| clocks = <&rpmhcc RPMH_CXO_CLK>; |
| clock-names = "bi_tcxo"; |
| #clock-cells = <1>; |
| #power-domain-cells = <1>; |
| }; |
| |
| lpass_ag_noc: interconnect@3c40000 { |
| reg = <0 0x03c40000 0 0xf080>; |
| compatible = "qcom,sc7280-lpass-ag-noc"; |
| #interconnect-cells = <2>; |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| }; |
| |
| lpass_tlmm: pinctrl@33c0000 { |
| compatible = "qcom,sc7280-lpass-lpi-pinctrl"; |
| reg = <0 0x033c0000 0x0 0x20000>, |
| <0 0x03550000 0x0 0x10000>; |
| qcom,adsp-bypass-mode; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = <&lpass_tlmm 0 0 15>; |
| |
| lpass_dmic01_clk: dmic01-clk-state { |
| pins = "gpio6"; |
| function = "dmic1_clk"; |
| }; |
| |
| lpass_dmic01_data: dmic01-data-state { |
| pins = "gpio7"; |
| function = "dmic1_data"; |
| }; |
| |
| lpass_dmic23_clk: dmic23-clk-state { |
| pins = "gpio8"; |
| function = "dmic2_clk"; |
| }; |
| |
| lpass_dmic23_data: dmic23-data-state { |
| pins = "gpio9"; |
| function = "dmic2_data"; |
| }; |
| |
| lpass_rx_swr_clk: rx-swr-clk-state { |
| pins = "gpio3"; |
| function = "swr_rx_clk"; |
| }; |
| |
| lpass_rx_swr_data: rx-swr-data-state { |
| pins = "gpio4", "gpio5"; |
| function = "swr_rx_data"; |
| }; |
| |
| lpass_tx_swr_clk: tx-swr-clk-state { |
| pins = "gpio0"; |
| function = "swr_tx_clk"; |
| }; |
| |
| lpass_tx_swr_data: tx-swr-data-state { |
| pins = "gpio1", "gpio2", "gpio14"; |
| function = "swr_tx_data"; |
| }; |
| }; |
| |
| gpu: gpu@3d00000 { |
| compatible = "qcom,adreno-635.0", "qcom,adreno"; |
| reg = <0 0x03d00000 0 0x40000>, |
| <0 0x03d9e000 0 0x1000>, |
| <0 0x03d61000 0 0x800>; |
| reg-names = "kgsl_3d0_reg_memory", |
| "cx_mem", |
| "cx_dbgc"; |
| interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; |
| iommus = <&adreno_smmu 0 0x401>; |
| operating-points-v2 = <&gpu_opp_table>; |
| qcom,gmu = <&gmu>; |
| interconnects = <&gem_noc MASTER_GFX3D 0 &mc_virt SLAVE_EBI1 0>; |
| interconnect-names = "gfx-mem"; |
| #cooling-cells = <2>; |
| |
| nvmem-cells = <&gpu_speed_bin>; |
| nvmem-cell-names = "speed_bin"; |
| |
| gpu_opp_table: opp-table { |
| compatible = "operating-points-v2"; |
| |
| opp-315000000 { |
| opp-hz = /bits/ 64 <315000000>; |
| opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; |
| opp-peak-kBps = <1804000>; |
| opp-supported-hw = <0x03>; |
| }; |
| |
| opp-450000000 { |
| opp-hz = /bits/ 64 <450000000>; |
| opp-level = <RPMH_REGULATOR_LEVEL_SVS>; |
| opp-peak-kBps = <4068000>; |
| opp-supported-hw = <0x03>; |
| }; |
| |
| /* Only applicable for SKUs which has 550Mhz as Fmax */ |
| opp-550000000-0 { |
| opp-hz = /bits/ 64 <550000000>; |
| opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; |
| opp-peak-kBps = <8368000>; |
| opp-supported-hw = <0x01>; |
| }; |
| |
| opp-550000000-1 { |
| opp-hz = /bits/ 64 <550000000>; |
| opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; |
| opp-peak-kBps = <6832000>; |
| opp-supported-hw = <0x02>; |
| }; |
| |
| opp-608000000 { |
| opp-hz = /bits/ 64 <608000000>; |
| opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>; |
| opp-peak-kBps = <8368000>; |
| opp-supported-hw = <0x02>; |
| }; |
| |
| opp-700000000 { |
| opp-hz = /bits/ 64 <700000000>; |
| opp-level = <RPMH_REGULATOR_LEVEL_NOM>; |
| opp-peak-kBps = <8532000>; |
| opp-supported-hw = <0x02>; |
| }; |
| |
| opp-812000000 { |
| opp-hz = /bits/ 64 <812000000>; |
| opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; |
| opp-peak-kBps = <8532000>; |
| opp-supported-hw = <0x02>; |
| }; |
| |
| opp-840000000 { |
| opp-hz = /bits/ 64 <840000000>; |
| opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; |
| opp-peak-kBps = <8532000>; |
| opp-supported-hw = <0x02>; |
| }; |
| |
| opp-900000000 { |
| opp-hz = /bits/ 64 <900000000>; |
| opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; |
| opp-peak-kBps = <8532000>; |
| opp-supported-hw = <0x02>; |
| }; |
| }; |
| }; |
| |
| gmu: gmu@3d6a000 { |
| compatible = "qcom,adreno-gmu-635.0", "qcom,adreno-gmu"; |
| reg = <0 0x03d6a000 0 0x34000>, |
| <0 0x3de0000 0 0x10000>, |
| <0 0x0b290000 0 0x10000>; |
| reg-names = "gmu", "rscc", "gmu_pdc"; |
| interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "hfi", "gmu"; |
| clocks = <&gpucc GPU_CC_CX_GMU_CLK>, |
| <&gpucc GPU_CC_CXO_CLK>, |
| <&gcc GCC_DDRSS_GPU_AXI_CLK>, |
| <&gcc GCC_GPU_MEMNOC_GFX_CLK>, |
| <&gpucc GPU_CC_AHB_CLK>, |
| <&gpucc GPU_CC_HUB_CX_INT_CLK>, |
| <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>; |
| clock-names = "gmu", |
| "cxo", |
| "axi", |
| "memnoc", |
| "ahb", |
| "hub", |
| "smmu_vote"; |
| power-domains = <&gpucc GPU_CC_CX_GDSC>, |
| <&gpucc GPU_CC_GX_GDSC>; |
| power-domain-names = "cx", |
| "gx"; |
| iommus = <&adreno_smmu 5 0x400>; |
| operating-points-v2 = <&gmu_opp_table>; |
| |
| gmu_opp_table: opp-table { |
| compatible = "operating-points-v2"; |
| |
| opp-200000000 { |
| opp-hz = /bits/ 64 <200000000>; |
| opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; |
| }; |
| }; |
| }; |
| |
| gpucc: clock-controller@3d90000 { |
| compatible = "qcom,sc7280-gpucc"; |
| reg = <0 0x03d90000 0 0x9000>; |
| clocks = <&rpmhcc RPMH_CXO_CLK>, |
| <&gcc GCC_GPU_GPLL0_CLK_SRC>, |
| <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; |
| clock-names = "bi_tcxo", |
| "gcc_gpu_gpll0_clk_src", |
| "gcc_gpu_gpll0_div_clk_src"; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| #power-domain-cells = <1>; |
| }; |
| |
| dma@117f000 { |
| compatible = "qcom,sc7280-dcc", "qcom,dcc"; |
| reg = <0x0 0x0117f000 0x0 0x1000>, |
| <0x0 0x01112000 0x0 0x6000>; |
| }; |
| |
| adreno_smmu: iommu@3da0000 { |
| compatible = "qcom,sc7280-smmu-500", "qcom,adreno-smmu", |
| "qcom,smmu-500", "arm,mmu-500"; |
| reg = <0 0x03da0000 0 0x20000>; |
| #iommu-cells = <2>; |
| #global-interrupts = <2>; |
| interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 675 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>; |
| |
| clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>, |
| <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>, |
| <&gpucc GPU_CC_AHB_CLK>, |
| <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>, |
| <&gpucc GPU_CC_CX_GMU_CLK>, |
| <&gpucc GPU_CC_HUB_CX_INT_CLK>, |
| <&gpucc GPU_CC_HUB_AON_CLK>; |
| clock-names = "gcc_gpu_memnoc_gfx_clk", |
| "gcc_gpu_snoc_dvm_gfx_clk", |
| "gpu_cc_ahb_clk", |
| "gpu_cc_hlos1_vote_gpu_smmu_clk", |
| "gpu_cc_cx_gmu_clk", |
| "gpu_cc_hub_cx_int_clk", |
| "gpu_cc_hub_aon_clk"; |
| |
| power-domains = <&gpucc GPU_CC_CX_GDSC>; |
| }; |
| |
| remoteproc_mpss: remoteproc@4080000 { |
| compatible = "qcom,sc7280-mpss-pas"; |
| reg = <0 0x04080000 0 0x10000>, <0 0x04180000 0 0x48>; |
| reg-names = "qdsp6", "rmb"; |
| |
| interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>, |
| <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, |
| <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, |
| <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, |
| <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, |
| <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; |
| interrupt-names = "wdog", "fatal", "ready", "handover", |
| "stop-ack", "shutdown-ack"; |
| |
| clocks = <&rpmhcc RPMH_CXO_CLK>; |
| clock-names = "xo"; |
| |
| power-domains = <&rpmhpd SC7280_CX>, |
| <&rpmhpd SC7280_MSS>; |
| power-domain-names = "cx", "mss"; |
| |
| memory-region = <&mpss_mem>; |
| |
| qcom,qmp = <&aoss_qmp>; |
| |
| qcom,smem-states = <&modem_smp2p_out 0>; |
| qcom,smem-state-names = "stop"; |
| |
| status = "disabled"; |
| |
| glink-edge { |
| interrupts-extended = <&ipcc IPCC_CLIENT_MPSS |
| IPCC_MPROC_SIGNAL_GLINK_QMP |
| IRQ_TYPE_EDGE_RISING>; |
| mboxes = <&ipcc IPCC_CLIENT_MPSS |
| IPCC_MPROC_SIGNAL_GLINK_QMP>; |
| label = "modem"; |
| qcom,remote-pid = <1>; |
| }; |
| }; |
| |
| stm@6002000 { |
| compatible = "arm,coresight-stm", "arm,primecell"; |
| reg = <0 0x06002000 0 0x1000>, |
| <0 0x16280000 0 0x180000>; |
| reg-names = "stm-base", "stm-stimulus-base"; |
| |
| clocks = <&aoss_qmp>; |
| clock-names = "apb_pclk"; |
| |
| out-ports { |
| port { |
| stm_out: endpoint { |
| remote-endpoint = <&funnel0_in7>; |
| }; |
| }; |
| }; |
| }; |
| |
| funnel@6041000 { |
| compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; |
| reg = <0 0x06041000 0 0x1000>; |
| |
| clocks = <&aoss_qmp>; |
| clock-names = "apb_pclk"; |
| |
| out-ports { |
| port { |
| funnel0_out: endpoint { |
| remote-endpoint = <&merge_funnel_in0>; |
| }; |
| }; |
| }; |
| |
| in-ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@7 { |
| reg = <7>; |
| funnel0_in7: endpoint { |
| remote-endpoint = <&stm_out>; |
| }; |
| }; |
| }; |
| }; |
| |
| funnel@6042000 { |
| compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; |
| reg = <0 0x06042000 0 0x1000>; |
| |
| clocks = <&aoss_qmp>; |
| clock-names = "apb_pclk"; |
| |
| out-ports { |
| port { |
| funnel1_out: endpoint { |
| remote-endpoint = <&merge_funnel_in1>; |
| }; |
| }; |
| }; |
| |
| in-ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@4 { |
| reg = <4>; |
| funnel1_in4: endpoint { |
| remote-endpoint = <&apss_merge_funnel_out>; |
| }; |
| }; |
| }; |
| }; |
| |
| funnel@6045000 { |
| compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; |
| reg = <0 0x06045000 0 0x1000>; |
| |
| clocks = <&aoss_qmp>; |
| clock-names = "apb_pclk"; |
| |
| out-ports { |
| port { |
| merge_funnel_out: endpoint { |
| remote-endpoint = <&swao_funnel_in>; |
| }; |
| }; |
| }; |
| |
| in-ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| merge_funnel_in0: endpoint { |
| remote-endpoint = <&funnel0_out>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| merge_funnel_in1: endpoint { |
| remote-endpoint = <&funnel1_out>; |
| }; |
| }; |
| }; |
| }; |
| |
| replicator@6046000 { |
| compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; |
| reg = <0 0x06046000 0 0x1000>; |
| |
| clocks = <&aoss_qmp>; |
| clock-names = "apb_pclk"; |
| |
| out-ports { |
| port { |
| replicator_out: endpoint { |
| remote-endpoint = <&etr_in>; |
| }; |
| }; |
| }; |
| |
| in-ports { |
| port { |
| replicator_in: endpoint { |
| remote-endpoint = <&swao_replicator_out>; |
| }; |
| }; |
| }; |
| }; |
| |
| etr@6048000 { |
| compatible = "arm,coresight-tmc", "arm,primecell"; |
| reg = <0 0x06048000 0 0x1000>; |
| iommus = <&apps_smmu 0x04c0 0>; |
| |
| clocks = <&aoss_qmp>; |
| clock-names = "apb_pclk"; |
| arm,scatter-gather; |
| |
| in-ports { |
| port { |
| etr_in: endpoint { |
| remote-endpoint = <&replicator_out>; |
| }; |
| }; |
| }; |
| }; |
| |
| funnel@6b04000 { |
| compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; |
| reg = <0 0x06b04000 0 0x1000>; |
| |
| clocks = <&aoss_qmp>; |
| clock-names = "apb_pclk"; |
| |
| out-ports { |
| port { |
| swao_funnel_out: endpoint { |
| remote-endpoint = <&etf_in>; |
| }; |
| }; |
| }; |
| |
| in-ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@7 { |
| reg = <7>; |
| swao_funnel_in: endpoint { |
| remote-endpoint = <&merge_funnel_out>; |
| }; |
| }; |
| }; |
| }; |
| |
| etf@6b05000 { |
| compatible = "arm,coresight-tmc", "arm,primecell"; |
| reg = <0 0x06b05000 0 0x1000>; |
| |
| clocks = <&aoss_qmp>; |
| clock-names = "apb_pclk"; |
| |
| out-ports { |
| port { |
| etf_out: endpoint { |
| remote-endpoint = <&swao_replicator_in>; |
| }; |
| }; |
| }; |
| |
| in-ports { |
| port { |
| etf_in: endpoint { |
| remote-endpoint = <&swao_funnel_out>; |
| }; |
| }; |
| }; |
| }; |
| |
| replicator@6b06000 { |
| compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; |
| reg = <0 0x06b06000 0 0x1000>; |
| |
| clocks = <&aoss_qmp>; |
| clock-names = "apb_pclk"; |
| qcom,replicator-loses-context; |
| |
| out-ports { |
| port { |
| swao_replicator_out: endpoint { |
| remote-endpoint = <&replicator_in>; |
| }; |
| }; |
| }; |
| |
| in-ports { |
| port { |
| swao_replicator_in: endpoint { |
| remote-endpoint = <&etf_out>; |
| }; |
| }; |
| }; |
| }; |
| |
| etm@7040000 { |
| compatible = "arm,coresight-etm4x", "arm,primecell"; |
| reg = <0 0x07040000 0 0x1000>; |
| |
| cpu = <&CPU0>; |
| |
| clocks = <&aoss_qmp>; |
| clock-names = "apb_pclk"; |
| arm,coresight-loses-context-with-cpu; |
| qcom,skip-power-up; |
| |
| out-ports { |
| port { |
| etm0_out: endpoint { |
| remote-endpoint = <&apss_funnel_in0>; |
| }; |
| }; |
| }; |
| }; |
| |
| etm@7140000 { |
| compatible = "arm,coresight-etm4x", "arm,primecell"; |
| reg = <0 0x07140000 0 0x1000>; |
| |
| cpu = <&CPU1>; |
| |
| clocks = <&aoss_qmp>; |
| clock-names = "apb_pclk"; |
| arm,coresight-loses-context-with-cpu; |
| qcom,skip-power-up; |
| |
| out-ports { |
| port { |
| etm1_out: endpoint { |
| remote-endpoint = <&apss_funnel_in1>; |
| }; |
| }; |
| }; |
| }; |
| |
| etm@7240000 { |
| compatible = "arm,coresight-etm4x", "arm,primecell"; |
| reg = <0 0x07240000 0 0x1000>; |
| |
| cpu = <&CPU2>; |
| |
| clocks = <&aoss_qmp>; |
| clock-names = "apb_pclk"; |
| arm,coresight-loses-context-with-cpu; |
| qcom,skip-power-up; |
| |
| out-ports { |
| port { |
| etm2_out: endpoint { |
| remote-endpoint = <&apss_funnel_in2>; |
| }; |
| }; |
| }; |
| }; |
| |
| etm@7340000 { |
| compatible = "arm,coresight-etm4x", "arm,primecell"; |
| reg = <0 0x07340000 0 0x1000>; |
| |
| cpu = <&CPU3>; |
| |
| clocks = <&aoss_qmp>; |
| clock-names = "apb_pclk"; |
| arm,coresight-loses-context-with-cpu; |
| qcom,skip-power-up; |
| |
| out-ports { |
| port { |
| etm3_out: endpoint { |
| remote-endpoint = <&apss_funnel_in3>; |
| }; |
| }; |
| }; |
| }; |
| |
| etm@7440000 { |
| compatible = "arm,coresight-etm4x", "arm,primecell"; |
| reg = <0 0x07440000 0 0x1000>; |
| |
| cpu = <&CPU4>; |
| |
| clocks = <&aoss_qmp>; |
| clock-names = "apb_pclk"; |
| arm,coresight-loses-context-with-cpu; |
| qcom,skip-power-up; |
| |
| out-ports { |
| port { |
| etm4_out: endpoint { |
| remote-endpoint = <&apss_funnel_in4>; |
| }; |
| }; |
| }; |
| }; |
| |
| etm@7540000 { |
| compatible = "arm,coresight-etm4x", "arm,primecell"; |
| reg = <0 0x07540000 0 0x1000>; |
| |
| cpu = <&CPU5>; |
| |
| clocks = <&aoss_qmp>; |
| clock-names = "apb_pclk"; |
| arm,coresight-loses-context-with-cpu; |
| qcom,skip-power-up; |
| |
| out-ports { |
| port { |
| etm5_out: endpoint { |
| remote-endpoint = <&apss_funnel_in5>; |
| }; |
| }; |
| }; |
| }; |
| |
| etm@7640000 { |
| compatible = "arm,coresight-etm4x", "arm,primecell"; |
| reg = <0 0x07640000 0 0x1000>; |
| |
| cpu = <&CPU6>; |
| |
| clocks = <&aoss_qmp>; |
| clock-names = "apb_pclk"; |
| arm,coresight-loses-context-with-cpu; |
| qcom,skip-power-up; |
| |
| out-ports { |
| port { |
| etm6_out: endpoint { |
| remote-endpoint = <&apss_funnel_in6>; |
| }; |
| }; |
| }; |
| }; |
| |
| etm@7740000 { |
| compatible = "arm,coresight-etm4x", "arm,primecell"; |
| reg = <0 0x07740000 0 0x1000>; |
| |
| cpu = <&CPU7>; |
| |
| clocks = <&aoss_qmp>; |
| clock-names = "apb_pclk"; |
| arm,coresight-loses-context-with-cpu; |
| qcom,skip-power-up; |
| |
| out-ports { |
| port { |
| etm7_out: endpoint { |
| remote-endpoint = <&apss_funnel_in7>; |
| }; |
| }; |
| }; |
| }; |
| |
| funnel@7800000 { /* APSS Funnel */ |
| compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; |
| reg = <0 0x07800000 0 0x1000>; |
| |
| clocks = <&aoss_qmp>; |
| clock-names = "apb_pclk"; |
| |
| out-ports { |
| port { |
| apss_funnel_out: endpoint { |
| remote-endpoint = <&apss_merge_funnel_in>; |
| }; |
| }; |
| }; |
| |
| in-ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| apss_funnel_in0: endpoint { |
| remote-endpoint = <&etm0_out>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| apss_funnel_in1: endpoint { |
| remote-endpoint = <&etm1_out>; |
| }; |
| }; |
| |
| port@2 { |
| reg = <2>; |
| apss_funnel_in2: endpoint { |
| remote-endpoint = <&etm2_out>; |
| }; |
| }; |
| |
| port@3 { |
| reg = <3>; |
| apss_funnel_in3: endpoint { |
| remote-endpoint = <&etm3_out>; |
| }; |
| }; |
| |
| port@4 { |
| reg = <4>; |
| apss_funnel_in4: endpoint { |
| remote-endpoint = <&etm4_out>; |
| }; |
| }; |
| |
| port@5 { |
| reg = <5>; |
| apss_funnel_in5: endpoint { |
| remote-endpoint = <&etm5_out>; |
| }; |
| }; |
| |
| port@6 { |
| reg = <6>; |
| apss_funnel_in6: endpoint { |
| remote-endpoint = <&etm6_out>; |
| }; |
| }; |
| |
| port@7 { |
| reg = <7>; |
| apss_funnel_in7: endpoint { |
| remote-endpoint = <&etm7_out>; |
| }; |
| }; |
| }; |
| }; |
| |
| funnel@7810000 { |
| compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; |
| reg = <0 0x07810000 0 0x1000>; |
| |
| clocks = <&aoss_qmp>; |
| clock-names = "apb_pclk"; |
| |
| out-ports { |
| port { |
| apss_merge_funnel_out: endpoint { |
| remote-endpoint = <&funnel1_in4>; |
| }; |
| }; |
| }; |
| |
| in-ports { |
| port { |
| apss_merge_funnel_in: endpoint { |
| remote-endpoint = <&apss_funnel_out>; |
| }; |
| }; |
| }; |
| }; |
| |
| sdhc_2: mmc@8804000 { |
| compatible = "qcom,sc7280-sdhci", "qcom,sdhci-msm-v5"; |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>; |
| pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_cmd_sleep>, <&sdc2_data_sleep>; |
| status = "disabled"; |
| |
| reg = <0 0x08804000 0 0x1000>; |
| |
| iommus = <&apps_smmu 0x100 0x0>; |
| interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "hc_irq", "pwr_irq"; |
| |
| clocks = <&gcc GCC_SDCC2_AHB_CLK>, |
| <&gcc GCC_SDCC2_APPS_CLK>, |
| <&rpmhcc RPMH_CXO_CLK>; |
| clock-names = "iface", "core", "xo"; |
| interconnects = <&aggre1_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_SDCC_2 0>; |
| interconnect-names = "sdhc-ddr","cpu-sdhc"; |
| power-domains = <&rpmhpd SC7280_CX>; |
| operating-points-v2 = <&sdhc2_opp_table>; |
| |
| bus-width = <4>; |
| |
| qcom,dll-config = <0x0007642c>; |
| |
| resets = <&gcc GCC_SDCC2_BCR>; |
| |
| sdhc2_opp_table: opp-table { |
| compatible = "operating-points-v2"; |
| |
| opp-100000000 { |
| opp-hz = /bits/ 64 <100000000>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| opp-peak-kBps = <1800000 400000>; |
| opp-avg-kBps = <100000 0>; |
| }; |
| |
| opp-202000000 { |
| opp-hz = /bits/ 64 <202000000>; |
| required-opps = <&rpmhpd_opp_nom>; |
| opp-peak-kBps = <5400000 1600000>; |
| opp-avg-kBps = <200000 0>; |
| }; |
| }; |
| }; |
| |
| usb_1_hsphy: phy@88e3000 { |
| compatible = "qcom,sc7280-usb-hs-phy", |
| "qcom,usb-snps-hs-7nm-phy"; |
| reg = <0 0x088e3000 0 0x400>; |
| status = "disabled"; |
| #phy-cells = <0>; |
| |
| clocks = <&rpmhcc RPMH_CXO_CLK>; |
| clock-names = "ref"; |
| |
| resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; |
| }; |
| |
| usb_2_hsphy: phy@88e4000 { |
| compatible = "qcom,sc7280-usb-hs-phy", |
| "qcom,usb-snps-hs-7nm-phy"; |
| reg = <0 0x088e4000 0 0x400>; |
| status = "disabled"; |
| #phy-cells = <0>; |
| |
| clocks = <&rpmhcc RPMH_CXO_CLK>; |
| clock-names = "ref"; |
| |
| resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; |
| }; |
| |
| usb_1_qmpphy: phy-wrapper@88e9000 { |
| compatible = "qcom,sc7280-qmp-usb3-dp-phy", |
| "qcom,sm8250-qmp-usb3-dp-phy"; |
| reg = <0 0x088e9000 0 0x200>, |
| <0 0x088e8000 0 0x40>, |
| <0 0x088ea000 0 0x200>; |
| status = "disabled"; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, |
| <&rpmhcc RPMH_CXO_CLK>, |
| <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; |
| clock-names = "aux", "ref_clk_src", "com_aux"; |
| |
| resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>, |
| <&gcc GCC_USB3_PHY_PRIM_BCR>; |
| reset-names = "phy", "common"; |
| |
| usb_1_ssphy: usb3-phy@88e9200 { |
| reg = <0 0x088e9200 0 0x200>, |
| <0 0x088e9400 0 0x200>, |
| <0 0x088e9c00 0 0x400>, |
| <0 0x088e9600 0 0x200>, |
| <0 0x088e9800 0 0x200>, |
| <0 0x088e9a00 0 0x100>; |
| #clock-cells = <0>; |
| #phy-cells = <0>; |
| clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; |
| clock-names = "pipe0"; |
| clock-output-names = "usb3_phy_pipe_clk_src"; |
| }; |
| |
| dp_phy: dp-phy@88ea200 { |
| reg = <0 0x088ea200 0 0x200>, |
| <0 0x088ea400 0 0x200>, |
| <0 0x088eaa00 0 0x200>, |
| <0 0x088ea600 0 0x200>, |
| <0 0x088ea800 0 0x200>; |
| #phy-cells = <0>; |
| #clock-cells = <1>; |
| }; |
| }; |
| |
| usb_2: usb@8cf8800 { |
| compatible = "qcom,sc7280-dwc3", "qcom,dwc3"; |
| reg = <0 0x08cf8800 0 0x400>; |
| status = "disabled"; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| dma-ranges; |
| |
| clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>, |
| <&gcc GCC_USB30_SEC_MASTER_CLK>, |
| <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>, |
| <&gcc GCC_USB30_SEC_SLEEP_CLK>, |
| <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>; |
| clock-names = "cfg_noc", |
| "core", |
| "iface", |
| "sleep", |
| "mock_utmi"; |
| |
| assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, |
| <&gcc GCC_USB30_SEC_MASTER_CLK>; |
| assigned-clock-rates = <19200000>, <200000000>; |
| |
| interrupts-extended = <&intc GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, |
| <&pdc 12 IRQ_TYPE_EDGE_RISING>, |
| <&pdc 13 IRQ_TYPE_EDGE_RISING>; |
| interrupt-names = "hs_phy_irq", |
| "dp_hs_phy_irq", |
| "dm_hs_phy_irq"; |
| |
| power-domains = <&gcc GCC_USB30_SEC_GDSC>; |
| required-opps = <&rpmhpd_opp_nom>; |
| |
| resets = <&gcc GCC_USB30_SEC_BCR>; |
| |
| interconnects = <&aggre1_noc MASTER_USB2 0 &mc_virt SLAVE_EBI1 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_USB2 0>; |
| interconnect-names = "usb-ddr", "apps-usb"; |
| |
| usb_2_dwc3: usb@8c00000 { |
| compatible = "snps,dwc3"; |
| reg = <0 0x08c00000 0 0xe000>; |
| interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>; |
| iommus = <&apps_smmu 0xa0 0x0>; |
| snps,dis_u2_susphy_quirk; |
| snps,dis_enblslpm_quirk; |
| phys = <&usb_2_hsphy>; |
| phy-names = "usb2-phy"; |
| maximum-speed = "high-speed"; |
| usb-role-switch; |
| |
| port { |
| usb2_role_switch: endpoint { |
| remote-endpoint = <&eud_ep>; |
| }; |
| }; |
| }; |
| }; |
| |
| qspi: spi@88dc000 { |
| compatible = "qcom,sc7280-qspi", "qcom,qspi-v1"; |
| reg = <0 0x088dc000 0 0x1000>; |
| iommus = <&apps_smmu 0x20 0x0>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>, |
| <&gcc GCC_QSPI_CORE_CLK>; |
| clock-names = "iface", "core"; |
| interconnects = <&gem_noc MASTER_APPSS_PROC 0 |
| &cnoc2 SLAVE_QSPI_0 0>; |
| interconnect-names = "qspi-config"; |
| power-domains = <&rpmhpd SC7280_CX>; |
| operating-points-v2 = <&qspi_opp_table>; |
| status = "disabled"; |
| }; |
| |
| remoteproc_wpss: remoteproc@8a00000 { |
| compatible = "qcom,sc7280-wpss-pil"; |
| reg = <0 0x08a00000 0 0x10000>; |
| |
| interrupts-extended = <&intc GIC_SPI 587 IRQ_TYPE_EDGE_RISING>, |
| <&wpss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, |
| <&wpss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, |
| <&wpss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, |
| <&wpss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, |
| <&wpss_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; |
| interrupt-names = "wdog", "fatal", "ready", "handover", |
| "stop-ack", "shutdown-ack"; |
| |
| clocks = <&gcc GCC_WPSS_AHB_BDG_MST_CLK>, |
| <&gcc GCC_WPSS_AHB_CLK>, |
| <&gcc GCC_WPSS_RSCP_CLK>, |
| <&rpmhcc RPMH_CXO_CLK>; |
| clock-names = "ahb_bdg", "ahb", |
| "rscp", "xo"; |
| |
| power-domains = <&rpmhpd SC7280_CX>, |
| <&rpmhpd SC7280_MX>; |
| power-domain-names = "cx", "mx"; |
| |
| memory-region = <&wpss_mem>; |
| |
| qcom,qmp = <&aoss_qmp>; |
| |
| qcom,smem-states = <&wpss_smp2p_out 0>; |
| qcom,smem-state-names = "stop"; |
| |
| resets = <&aoss_reset AOSS_CC_WCSS_RESTART>, |
| <&pdc_reset PDC_WPSS_SYNC_RESET>; |
| reset-names = "restart", "pdc_sync"; |
| |
| qcom,halt-regs = <&tcsr_1 0x17000>; |
| |
| status = "disabled"; |
| |
| glink-edge { |
| interrupts-extended = <&ipcc IPCC_CLIENT_WPSS |
| IPCC_MPROC_SIGNAL_GLINK_QMP |
| IRQ_TYPE_EDGE_RISING>; |
| mboxes = <&ipcc IPCC_CLIENT_WPSS |
| IPCC_MPROC_SIGNAL_GLINK_QMP>; |
| |
| label = "wpss"; |
| qcom,remote-pid = <13>; |
| }; |
| }; |
| |
| pmu@9091000 { |
| compatible = "qcom,sc7280-llcc-bwmon"; |
| reg = <0 0x09091000 0 0x1000>; |
| |
| interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; |
| |
| interconnects = <&mc_virt MASTER_LLCC 3 &mc_virt SLAVE_EBI1 3>; |
| |
| operating-points-v2 = <&llcc_bwmon_opp_table>; |
| |
| llcc_bwmon_opp_table: opp-table { |
| compatible = "operating-points-v2"; |
| |
| opp-0 { |
| opp-peak-kBps = <800000>; |
| }; |
| opp-1 { |
| opp-peak-kBps = <1804000>; |
| }; |
| opp-2 { |
| opp-peak-kBps = <2188000>; |
| }; |
| opp-3 { |
| opp-peak-kBps = <3072000>; |
| }; |
| opp-4 { |
| opp-peak-kBps = <4068000>; |
| }; |
| opp-5 { |
| opp-peak-kBps = <6220000>; |
| }; |
| opp-6 { |
| opp-peak-kBps = <6832000>; |
| }; |
| opp-7 { |
| opp-peak-kBps = <8532000>; |
| }; |
| }; |
| }; |
| |
| pmu@90b6400 { |
| compatible = "qcom,sc7280-cpu-bwmon", "qcom,sdm845-bwmon"; |
| reg = <0 0x090b6400 0 0x600>; |
| |
| interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>; |
| |
| interconnects = <&gem_noc MASTER_APPSS_PROC 3 &gem_noc SLAVE_LLCC 3>; |
| operating-points-v2 = <&cpu_bwmon_opp_table>; |
| |
| cpu_bwmon_opp_table: opp-table { |
| compatible = "operating-points-v2"; |
| |
| opp-0 { |
| opp-peak-kBps = <2400000>; |
| }; |
| opp-1 { |
| opp-peak-kBps = <4800000>; |
| }; |
| opp-2 { |
| opp-peak-kBps = <7456000>; |
| }; |
| opp-3 { |
| opp-peak-kBps = <9600000>; |
| }; |
| opp-4 { |
| opp-peak-kBps = <12896000>; |
| }; |
| opp-5 { |
| opp-peak-kBps = <14928000>; |
| }; |
| opp-6 { |
| opp-peak-kBps = <17056000>; |
| }; |
| }; |
| }; |
| |
| dc_noc: interconnect@90e0000 { |
| reg = <0 0x090e0000 0 0x5080>; |
| compatible = "qcom,sc7280-dc-noc"; |
| #interconnect-cells = <2>; |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| }; |
| |
| gem_noc: interconnect@9100000 { |
| reg = <0 0x09100000 0 0xe2200>; |
| compatible = "qcom,sc7280-gem-noc"; |
| #interconnect-cells = <2>; |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| }; |
| |
| system-cache-controller@9200000 { |
| compatible = "qcom,sc7280-llcc"; |
| reg = <0 0x09200000 0 0x58000>, <0 0x09280000 0 0x58000>, |
| <0 0x09600000 0 0x58000>; |
| reg-names = "llcc0_base", "llcc1_base", "llcc_broadcast_base"; |
| interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| eud: eud@88e0000 { |
| compatible = "qcom,sc7280-eud", "qcom,eud"; |
| reg = <0 0x88e0000 0 0x2000>, |
| <0 0x88e2000 0 0x1000>; |
| interrupts-extended = <&pdc 11 IRQ_TYPE_LEVEL_HIGH>; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| eud_ep: endpoint { |
| remote-endpoint = <&usb2_role_switch>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| eud_con: endpoint { |
| remote-endpoint = <&con_eud>; |
| }; |
| }; |
| }; |
| }; |
| |
| nsp_noc: interconnect@a0c0000 { |
| reg = <0 0x0a0c0000 0 0x10000>; |
| compatible = "qcom,sc7280-nsp-noc"; |
| #interconnect-cells = <2>; |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| }; |
| |
| usb_1: usb@a6f8800 { |
| compatible = "qcom,sc7280-dwc3", "qcom,dwc3"; |
| reg = <0 0x0a6f8800 0 0x400>; |
| status = "disabled"; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| dma-ranges; |
| |
| clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, |
| <&gcc GCC_USB30_PRIM_MASTER_CLK>, |
| <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, |
| <&gcc GCC_USB30_PRIM_SLEEP_CLK>, |
| <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>; |
| clock-names = "cfg_noc", |
| "core", |
| "iface", |
| "sleep", |
| "mock_utmi"; |
| |
| assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, |
| <&gcc GCC_USB30_PRIM_MASTER_CLK>; |
| assigned-clock-rates = <19200000>, <200000000>; |
| |
| interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, |
| <&pdc 14 IRQ_TYPE_LEVEL_HIGH>, |
| <&pdc 15 IRQ_TYPE_EDGE_BOTH>, |
| <&pdc 17 IRQ_TYPE_EDGE_BOTH>; |
| interrupt-names = "hs_phy_irq", |
| "dp_hs_phy_irq", |
| "dm_hs_phy_irq", |
| "ss_phy_irq"; |
| |
| power-domains = <&gcc GCC_USB30_PRIM_GDSC>; |
| required-opps = <&rpmhpd_opp_nom>; |
| |
| resets = <&gcc GCC_USB30_PRIM_BCR>; |
| |
| interconnects = <&aggre1_noc MASTER_USB3_0 0 &mc_virt SLAVE_EBI1 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_USB3_0 0>; |
| interconnect-names = "usb-ddr", "apps-usb"; |
| |
| wakeup-source; |
| |
| usb_1_dwc3: usb@a600000 { |
| compatible = "snps,dwc3"; |
| reg = <0 0x0a600000 0 0xe000>; |
| interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; |
| iommus = <&apps_smmu 0xe0 0x0>; |
| snps,dis_u2_susphy_quirk; |
| snps,dis_enblslpm_quirk; |
| phys = <&usb_1_hsphy>, <&usb_1_ssphy>; |
| phy-names = "usb2-phy", "usb3-phy"; |
| maximum-speed = "super-speed"; |
| }; |
| }; |
| |
| venus: video-codec@aa00000 { |
| compatible = "qcom,sc7280-venus"; |
| reg = <0 0x0aa00000 0 0xd0600>; |
| interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; |
| |
| clocks = <&videocc VIDEO_CC_MVSC_CORE_CLK>, |
| <&videocc VIDEO_CC_MVSC_CTL_AXI_CLK>, |
| <&videocc VIDEO_CC_VENUS_AHB_CLK>, |
| <&videocc VIDEO_CC_MVS0_CORE_CLK>, |
| <&videocc VIDEO_CC_MVS0_AXI_CLK>; |
| clock-names = "core", "bus", "iface", |
| "vcodec_core", "vcodec_bus"; |
| |
| power-domains = <&videocc MVSC_GDSC>, |
| <&videocc MVS0_GDSC>, |
| <&rpmhpd SC7280_CX>; |
| power-domain-names = "venus", "vcodec0", "cx"; |
| operating-points-v2 = <&venus_opp_table>; |
| |
| interconnects = <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_VENUS_CFG 0>, |
| <&mmss_noc MASTER_VIDEO_P0 0 &mc_virt SLAVE_EBI1 0>; |
| interconnect-names = "cpu-cfg", "video-mem"; |
| |
| iommus = <&apps_smmu 0x2180 0x20>, |
| <&apps_smmu 0x2184 0x20>; |
| memory-region = <&video_mem>; |
| |
| video-decoder { |
| compatible = "venus-decoder"; |
| }; |
| |
| video-encoder { |
| compatible = "venus-encoder"; |
| }; |
| |
| video-firmware { |
| iommus = <&apps_smmu 0x21a2 0x0>; |
| }; |
| |
| venus_opp_table: opp-table { |
| compatible = "operating-points-v2"; |
| |
| opp-133330000 { |
| opp-hz = /bits/ 64 <133330000>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| }; |
| |
| opp-240000000 { |
| opp-hz = /bits/ 64 <240000000>; |
| required-opps = <&rpmhpd_opp_svs>; |
| }; |
| |
| opp-335000000 { |
| opp-hz = /bits/ 64 <335000000>; |
| required-opps = <&rpmhpd_opp_svs_l1>; |
| }; |
| |
| opp-424000000 { |
| opp-hz = /bits/ 64 <424000000>; |
| required-opps = <&rpmhpd_opp_nom>; |
| }; |
| |
| opp-460000048 { |
| opp-hz = /bits/ 64 <460000048>; |
| required-opps = <&rpmhpd_opp_turbo>; |
| }; |
| }; |
| }; |
| |
| videocc: clock-controller@aaf0000 { |
| compatible = "qcom,sc7280-videocc"; |
| reg = <0 0x0aaf0000 0 0x10000>; |
| clocks = <&rpmhcc RPMH_CXO_CLK>, |
| <&rpmhcc RPMH_CXO_CLK_A>; |
| clock-names = "bi_tcxo", "bi_tcxo_ao"; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| #power-domain-cells = <1>; |
| }; |
| |
| camcc: clock-controller@ad00000 { |
| compatible = "qcom,sc7280-camcc"; |
| reg = <0 0x0ad00000 0 0x10000>; |
| clocks = <&rpmhcc RPMH_CXO_CLK>, |
| <&rpmhcc RPMH_CXO_CLK_A>, |
| <&sleep_clk>; |
| clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk"; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| #power-domain-cells = <1>; |
| }; |
| |
| dispcc: clock-controller@af00000 { |
| compatible = "qcom,sc7280-dispcc"; |
| reg = <0 0x0af00000 0 0x20000>; |
| clocks = <&rpmhcc RPMH_CXO_CLK>, |
| <&gcc GCC_DISP_GPLL0_CLK_SRC>, |
| <&mdss_dsi_phy 0>, |
| <&mdss_dsi_phy 1>, |
| <&dp_phy 0>, |
| <&dp_phy 1>, |
| <&mdss_edp_phy 0>, |
| <&mdss_edp_phy 1>; |
| clock-names = "bi_tcxo", |
| "gcc_disp_gpll0_clk", |
| "dsi0_phy_pll_out_byteclk", |
| "dsi0_phy_pll_out_dsiclk", |
| "dp_phy_pll_link_clk", |
| "dp_phy_pll_vco_div_clk", |
| "edp_phy_pll_link_clk", |
| "edp_phy_pll_vco_div_clk"; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| #power-domain-cells = <1>; |
| }; |
| |
| mdss: display-subsystem@ae00000 { |
| compatible = "qcom,sc7280-mdss"; |
| reg = <0 0x0ae00000 0 0x1000>; |
| reg-names = "mdss"; |
| |
| power-domains = <&dispcc DISP_CC_MDSS_CORE_GDSC>; |
| |
| clocks = <&gcc GCC_DISP_AHB_CLK>, |
| <&dispcc DISP_CC_MDSS_AHB_CLK>, |
| <&dispcc DISP_CC_MDSS_MDP_CLK>; |
| clock-names = "iface", |
| "ahb", |
| "core"; |
| |
| interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| |
| interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>; |
| interconnect-names = "mdp0-mem"; |
| |
| iommus = <&apps_smmu 0x900 0x402>; |
| |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| status = "disabled"; |
| |
| mdss_mdp: display-controller@ae01000 { |
| compatible = "qcom,sc7280-dpu"; |
| reg = <0 0x0ae01000 0 0x8f030>, |
| <0 0x0aeb0000 0 0x2008>; |
| reg-names = "mdp", "vbif"; |
| |
| clocks = <&gcc GCC_DISP_HF_AXI_CLK>, |
| <&gcc GCC_DISP_SF_AXI_CLK>, |
| <&dispcc DISP_CC_MDSS_AHB_CLK>, |
| <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, |
| <&dispcc DISP_CC_MDSS_MDP_CLK>, |
| <&dispcc DISP_CC_MDSS_VSYNC_CLK>; |
| clock-names = "bus", |
| "nrt_bus", |
| "iface", |
| "lut", |
| "core", |
| "vsync"; |
| assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>, |
| <&dispcc DISP_CC_MDSS_AHB_CLK>; |
| assigned-clock-rates = <19200000>, |
| <19200000>; |
| operating-points-v2 = <&mdp_opp_table>; |
| power-domains = <&rpmhpd SC7280_CX>; |
| |
| interrupt-parent = <&mdss>; |
| interrupts = <0>; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| dpu_intf1_out: endpoint { |
| remote-endpoint = <&mdss_dsi0_in>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| dpu_intf5_out: endpoint { |
| remote-endpoint = <&edp_in>; |
| }; |
| }; |
| |
| port@2 { |
| reg = <2>; |
| dpu_intf0_out: endpoint { |
| remote-endpoint = <&dp_in>; |
| }; |
| }; |
| }; |
| |
| mdp_opp_table: opp-table { |
| compatible = "operating-points-v2"; |
| |
| opp-200000000 { |
| opp-hz = /bits/ 64 <200000000>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| }; |
| |
| opp-300000000 { |
| opp-hz = /bits/ 64 <300000000>; |
| required-opps = <&rpmhpd_opp_svs>; |
| }; |
| |
| opp-380000000 { |
| opp-hz = /bits/ 64 <380000000>; |
| required-opps = <&rpmhpd_opp_svs_l1>; |
| }; |
| |
| opp-506666667 { |
| opp-hz = /bits/ 64 <506666667>; |
| required-opps = <&rpmhpd_opp_nom>; |
| }; |
| }; |
| }; |
| |
| mdss_dsi: dsi@ae94000 { |
| compatible = "qcom,sc7280-dsi-ctrl", |
| "qcom,mdss-dsi-ctrl"; |
| reg = <0 0x0ae94000 0 0x400>; |
| reg-names = "dsi_ctrl"; |
| |
| interrupt-parent = <&mdss>; |
| interrupts = <4>; |
| |
| clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, |
| <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, |
| <&dispcc DISP_CC_MDSS_PCLK0_CLK>, |
| <&dispcc DISP_CC_MDSS_ESC0_CLK>, |
| <&dispcc DISP_CC_MDSS_AHB_CLK>, |
| <&gcc GCC_DISP_HF_AXI_CLK>; |
| clock-names = "byte", |
| "byte_intf", |
| "pixel", |
| "core", |
| "iface", |
| "bus"; |
| |
| assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; |
| assigned-clock-parents = <&mdss_dsi_phy 0>, <&mdss_dsi_phy 1>; |
| |
| operating-points-v2 = <&dsi_opp_table>; |
| power-domains = <&rpmhpd SC7280_CX>; |
| |
| phys = <&mdss_dsi_phy>; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| mdss_dsi0_in: endpoint { |
| remote-endpoint = <&dpu_intf1_out>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| mdss_dsi0_out: endpoint { |
| }; |
| }; |
| }; |
| |
| dsi_opp_table: opp-table { |
| compatible = "operating-points-v2"; |
| |
| opp-187500000 { |
| opp-hz = /bits/ 64 <187500000>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| }; |
| |
| opp-300000000 { |
| opp-hz = /bits/ 64 <300000000>; |
| required-opps = <&rpmhpd_opp_svs>; |
| }; |
| |
| opp-358000000 { |
| opp-hz = /bits/ 64 <358000000>; |
| required-opps = <&rpmhpd_opp_svs_l1>; |
| }; |
| }; |
| }; |
| |
| mdss_dsi_phy: phy@ae94400 { |
| compatible = "qcom,sc7280-dsi-phy-7nm"; |
| reg = <0 0x0ae94400 0 0x200>, |
| <0 0x0ae94600 0 0x280>, |
| <0 0x0ae94900 0 0x280>; |
| reg-names = "dsi_phy", |
| "dsi_phy_lane", |
| "dsi_pll"; |
| |
| #clock-cells = <1>; |
| #phy-cells = <0>; |
| |
| clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, |
| <&rpmhcc RPMH_CXO_CLK>; |
| clock-names = "iface", "ref"; |
| |
| status = "disabled"; |
| }; |
| |
| mdss_edp: edp@aea0000 { |
| compatible = "qcom,sc7280-edp"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&edp_hot_plug_det>; |
| |
| reg = <0 0x0aea0000 0 0x200>, |
| <0 0x0aea0200 0 0x200>, |
| <0 0x0aea0400 0 0xc00>, |
| <0 0x0aea1000 0 0x400>; |
| |
| interrupt-parent = <&mdss>; |
| interrupts = <14>; |
| |
| clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, |
| <&dispcc DISP_CC_MDSS_EDP_AUX_CLK>, |
| <&dispcc DISP_CC_MDSS_EDP_LINK_CLK>, |
| <&dispcc DISP_CC_MDSS_EDP_LINK_INTF_CLK>, |
| <&dispcc DISP_CC_MDSS_EDP_PIXEL_CLK>; |
| clock-names = "core_iface", |
| "core_aux", |
| "ctrl_link", |
| "ctrl_link_iface", |
| "stream_pixel"; |
| assigned-clocks = <&dispcc DISP_CC_MDSS_EDP_LINK_CLK_SRC>, |
| <&dispcc DISP_CC_MDSS_EDP_PIXEL_CLK_SRC>; |
| assigned-clock-parents = <&mdss_edp_phy 0>, <&mdss_edp_phy 1>; |
| |
| phys = <&mdss_edp_phy>; |
| phy-names = "dp"; |
| |
| operating-points-v2 = <&edp_opp_table>; |
| power-domains = <&rpmhpd SC7280_CX>; |
| |
| status = "disabled"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| edp_in: endpoint { |
| remote-endpoint = <&dpu_intf5_out>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| mdss_edp_out: endpoint { }; |
| }; |
| }; |
| |
| edp_opp_table: opp-table { |
| compatible = "operating-points-v2"; |
| |
| opp-160000000 { |
| opp-hz = /bits/ 64 <160000000>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| }; |
| |
| opp-270000000 { |
| opp-hz = /bits/ 64 <270000000>; |
| required-opps = <&rpmhpd_opp_svs>; |
| }; |
| |
| opp-540000000 { |
| opp-hz = /bits/ 64 <540000000>; |
| required-opps = <&rpmhpd_opp_nom>; |
| }; |
| |
| opp-810000000 { |
| opp-hz = /bits/ 64 <810000000>; |
| required-opps = <&rpmhpd_opp_nom>; |
| }; |
| }; |
| }; |
| |
| mdss_edp_phy: phy@aec2a00 { |
| compatible = "qcom,sc7280-edp-phy"; |
| |
| reg = <0 0x0aec2a00 0 0x19c>, |
| <0 0x0aec2200 0 0xa0>, |
| <0 0x0aec2600 0 0xa0>, |
| <0 0x0aec2000 0 0x1c0>; |
| |
| clocks = <&rpmhcc RPMH_CXO_CLK>, |
| <&gcc GCC_EDP_CLKREF_EN>; |
| clock-names = "aux", |
| "cfg_ahb"; |
| |
| #clock-cells = <1>; |
| #phy-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| mdss_dp: displayport-controller@ae90000 { |
| compatible = "qcom,sc7280-dp"; |
| |
| reg = <0 0x0ae90000 0 0x200>, |
| <0 0x0ae90200 0 0x200>, |
| <0 0x0ae90400 0 0xc00>, |
| <0 0x0ae91000 0 0x400>, |
| <0 0x0ae91400 0 0x400>; |
| |
| interrupt-parent = <&mdss>; |
| interrupts = <12>; |
| |
| clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, |
| <&dispcc DISP_CC_MDSS_DP_AUX_CLK>, |
| <&dispcc DISP_CC_MDSS_DP_LINK_CLK>, |
| <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>, |
| <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>; |
| clock-names = "core_iface", |
| "core_aux", |
| "ctrl_link", |
| "ctrl_link_iface", |
| "stream_pixel"; |
| assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>, |
| <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>; |
| assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>; |
| phys = <&dp_phy>; |
| phy-names = "dp"; |
| |
| operating-points-v2 = <&dp_opp_table>; |
| power-domains = <&rpmhpd SC7280_CX>; |
| |
| #sound-dai-cells = <0>; |
| |
| status = "disabled"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| dp_in: endpoint { |
| remote-endpoint = <&dpu_intf0_out>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| mdss_dp_out: endpoint { }; |
| }; |
| }; |
| |
| dp_opp_table: opp-table { |
| compatible = "operating-points-v2"; |
| |
| opp-160000000 { |
| opp-hz = /bits/ 64 <160000000>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| }; |
| |
| opp-270000000 { |
| opp-hz = /bits/ 64 <270000000>; |
| required-opps = <&rpmhpd_opp_svs>; |
| }; |
| |
| opp-540000000 { |
| opp-hz = /bits/ 64 <540000000>; |
| required-opps = <&rpmhpd_opp_svs_l1>; |
| }; |
| |
| opp-810000000 { |
| opp-hz = /bits/ 64 <810000000>; |
| required-opps = <&rpmhpd_opp_nom>; |
| }; |
| }; |
| }; |
| }; |
| |
| pdc: interrupt-controller@b220000 { |
| compatible = "qcom,sc7280-pdc", "qcom,pdc"; |
| reg = <0 0x0b220000 0 0x30000>; |
| qcom,pdc-ranges = <0 480 40>, <40 140 14>, <54 263 1>, |
| <55 306 4>, <59 312 3>, <62 374 2>, |
| <64 434 2>, <66 438 3>, <69 86 1>, |
| <70 520 54>, <124 609 31>, <155 63 1>, |
| <156 716 12>; |
| #interrupt-cells = <2>; |
| interrupt-parent = <&intc>; |
| interrupt-controller; |
| }; |
| |
| pdc_reset: reset-controller@b5e0000 { |
| compatible = "qcom,sc7280-pdc-global"; |
| reg = <0 0x0b5e0000 0 0x20000>; |
| #reset-cells = <1>; |
| }; |
| |
| tsens0: thermal-sensor@c263000 { |
| compatible = "qcom,sc7280-tsens","qcom,tsens-v2"; |
| reg = <0 0x0c263000 0 0x1ff>, /* TM */ |
| <0 0x0c222000 0 0x1ff>; /* SROT */ |
| #qcom,sensors = <15>; |
| interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "uplow","critical"; |
| #thermal-sensor-cells = <1>; |
| }; |
| |
| tsens1: thermal-sensor@c265000 { |
| compatible = "qcom,sc7280-tsens","qcom,tsens-v2"; |
| reg = <0 0x0c265000 0 0x1ff>, /* TM */ |
| <0 0x0c223000 0 0x1ff>; /* SROT */ |
| #qcom,sensors = <12>; |
| interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "uplow","critical"; |
| #thermal-sensor-cells = <1>; |
| }; |
| |
| aoss_reset: reset-controller@c2a0000 { |
| compatible = "qcom,sc7280-aoss-cc", "qcom,sdm845-aoss-cc"; |
| reg = <0 0x0c2a0000 0 0x31000>; |
| #reset-cells = <1>; |
| }; |
| |
| aoss_qmp: power-management@c300000 { |
| compatible = "qcom,sc7280-aoss-qmp", "qcom,aoss-qmp"; |
| reg = <0 0x0c300000 0 0x400>; |
| interrupts-extended = <&ipcc IPCC_CLIENT_AOP |
| IPCC_MPROC_SIGNAL_GLINK_QMP |
| IRQ_TYPE_EDGE_RISING>; |
| mboxes = <&ipcc IPCC_CLIENT_AOP |
| IPCC_MPROC_SIGNAL_GLINK_QMP>; |
| |
| #clock-cells = <0>; |
| }; |
| |
| sram@c3f0000 { |
| compatible = "qcom,rpmh-stats"; |
| reg = <0 0x0c3f0000 0 0x400>; |
| }; |
| |
| spmi_bus: spmi@c440000 { |
| compatible = "qcom,spmi-pmic-arb"; |
| reg = <0 0x0c440000 0 0x1100>, |
| <0 0x0c600000 0 0x2000000>, |
| <0 0x0e600000 0 0x100000>, |
| <0 0x0e700000 0 0xa0000>, |
| <0 0x0c40a000 0 0x26000>; |
| reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; |
| interrupt-names = "periph_irq"; |
| interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; |
| qcom,ee = <0>; |
| qcom,channel = <0>; |
| #address-cells = <2>; |
| #size-cells = <0>; |
| interrupt-controller; |
| #interrupt-cells = <4>; |
| }; |
| |
| tlmm: pinctrl@f100000 { |
| compatible = "qcom,sc7280-pinctrl"; |
| reg = <0 0x0f100000 0 0x300000>; |
| interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| gpio-ranges = <&tlmm 0 0 175>; |
| wakeup-parent = <&pdc>; |
| |
| dp_hot_plug_det: dp-hot-plug-det-state { |
| pins = "gpio47"; |
| function = "dp_hot"; |
| }; |
| |
| edp_hot_plug_det: edp-hot-plug-det-state { |
| pins = "gpio60"; |
| function = "edp_hot"; |
| }; |
| |
| mi2s0_data0: mi2s0-data0-state { |
| pins = "gpio98"; |
| function = "mi2s0_data0"; |
| }; |
| |
| mi2s0_data1: mi2s0-data1-state { |
| pins = "gpio99"; |
| function = "mi2s0_data1"; |
| }; |
| |
| mi2s0_mclk: mi2s0-mclk-state { |
| pins = "gpio96"; |
| function = "pri_mi2s"; |
| }; |
| |
| mi2s0_sclk: mi2s0-sclk-state { |
| pins = "gpio97"; |
| function = "mi2s0_sck"; |
| }; |
| |
| mi2s0_ws: mi2s0-ws-state { |
| pins = "gpio100"; |
| function = "mi2s0_ws"; |
| }; |
| |
| mi2s1_data0: mi2s1-data0-state { |
| pins = "gpio107"; |
| function = "mi2s1_data0"; |
| }; |
| |
| mi2s1_sclk: mi2s1-sclk-state { |
| pins = "gpio106"; |
| function = "mi2s1_sck"; |
| }; |
| |
| mi2s1_ws: mi2s1-ws-state { |
| pins = "gpio108"; |
| function = "mi2s1_ws"; |
| }; |
| |
| pcie1_clkreq_n: pcie1-clkreq-n-state { |
| pins = "gpio79"; |
| function = "pcie1_clkreqn"; |
| }; |
| |
| qspi_clk: qspi-clk-state { |
| pins = "gpio14"; |
| function = "qspi_clk"; |
| }; |
| |
| qspi_cs0: qspi-cs0-state { |
| pins = "gpio15"; |
| function = "qspi_cs"; |
| }; |
| |
| qspi_cs1: qspi-cs1-state { |
| pins = "gpio19"; |
| function = "qspi_cs"; |
| }; |
| |
| qspi_data0: qspi-data0-state { |
| pins = "gpio12"; |
| function = "qspi_data"; |
| }; |
| |
| qspi_data1: qspi-data1-state { |
| pins = "gpio13"; |
| function = "qspi_data"; |
| }; |
| |
| qspi_data23: qspi-data23-state { |
| pins = "gpio16", "gpio17"; |
| function = "qspi_data"; |
| }; |
| |
| qup_i2c0_data_clk: qup-i2c0-data-clk-state { |
| pins = "gpio0", "gpio1"; |
| function = "qup00"; |
| }; |
| |
| qup_i2c1_data_clk: qup-i2c1-data-clk-state { |
| pins = "gpio4", "gpio5"; |
| function = "qup01"; |
| }; |
| |
| qup_i2c2_data_clk: qup-i2c2-data-clk-state { |
| pins = "gpio8", "gpio9"; |
| function = "qup02"; |
| }; |
| |
| qup_i2c3_data_clk: qup-i2c3-data-clk-state { |
| pins = "gpio12", "gpio13"; |
| function = "qup03"; |
| }; |
| |
| qup_i2c4_data_clk: qup-i2c4-data-clk-state { |
| pins = "gpio16", "gpio17"; |
| function = "qup04"; |
| }; |
| |
| qup_i2c5_data_clk: qup-i2c5-data-clk-state { |
| pins = "gpio20", "gpio21"; |
| function = "qup05"; |
| }; |
| |
| qup_i2c6_data_clk: qup-i2c6-data-clk-state { |
| pins = "gpio24", "gpio25"; |
| function = "qup06"; |
| }; |
| |
| qup_i2c7_data_clk: qup-i2c7-data-clk-state { |
| pins = "gpio28", "gpio29"; |
| function = "qup07"; |
| }; |
| |
| qup_i2c8_data_clk: qup-i2c8-data-clk-state { |
| pins = "gpio32", "gpio33"; |
| function = "qup10"; |
| }; |
| |
| qup_i2c9_data_clk: qup-i2c9-data-clk-state { |
| pins = "gpio36", "gpio37"; |
| function = "qup11"; |
| }; |
| |
| qup_i2c10_data_clk: qup-i2c10-data-clk-state { |
| pins = "gpio40", "gpio41"; |
| function = "qup12"; |
| }; |
| |
| qup_i2c11_data_clk: qup-i2c11-data-clk-state { |
| pins = "gpio44", "gpio45"; |
| function = "qup13"; |
| }; |
| |
| qup_i2c12_data_clk: qup-i2c12-data-clk-state { |
| pins = "gpio48", "gpio49"; |
| function = "qup14"; |
| }; |
| |
| qup_i2c13_data_clk: qup-i2c13-data-clk-state { |
| pins = "gpio52", "gpio53"; |
| function = "qup15"; |
| }; |
| |
| qup_i2c14_data_clk: qup-i2c14-data-clk-state { |
| pins = "gpio56", "gpio57"; |
| function = "qup16"; |
| }; |
| |
| qup_i2c15_data_clk: qup-i2c15-data-clk-state { |
| pins = "gpio60", "gpio61"; |
| function = "qup17"; |
| }; |
| |
| qup_spi0_data_clk: qup-spi0-data-clk-state { |
| pins = "gpio0", "gpio1", "gpio2"; |
| function = "qup00"; |
| }; |
| |
| qup_spi0_cs: qup-spi0-cs-state { |
| pins = "gpio3"; |
| function = "qup00"; |
| }; |
| |
| qup_spi0_cs_gpio: qup-spi0-cs-gpio-state { |
| pins = "gpio3"; |
| function = "gpio"; |
| }; |
| |
| qup_spi1_data_clk: qup-spi1-data-clk-state { |
| pins = "gpio4", "gpio5", "gpio6"; |
| function = "qup01"; |
| }; |
| |
| qup_spi1_cs: qup-spi1-cs-state { |
| pins = "gpio7"; |
| function = "qup01"; |
| }; |
| |
| qup_spi1_cs_gpio: qup-spi1-cs-gpio-state { |
| pins = "gpio7"; |
| function = "gpio"; |
| }; |
| |
| qup_spi2_data_clk: qup-spi2-data-clk-state { |
| pins = "gpio8", "gpio9", "gpio10"; |
| function = "qup02"; |
| }; |
| |
| qup_spi2_cs: qup-spi2-cs-state { |
| pins = "gpio11"; |
| function = "qup02"; |
| }; |
| |
| qup_spi2_cs_gpio: qup-spi2-cs-gpio-state { |
| pins = "gpio11"; |
| function = "gpio"; |
| }; |
| |
| qup_spi3_data_clk: qup-spi3-data-clk-state { |
| pins = "gpio12", "gpio13", "gpio14"; |
| function = "qup03"; |
| }; |
| |
| qup_spi3_cs: qup-spi3-cs-state { |
| pins = "gpio15"; |
| function = "qup03"; |
| }; |
| |
| qup_spi3_cs_gpio: qup-spi3-cs-gpio-state { |
| pins = "gpio15"; |
| function = "gpio"; |
| }; |
| |
| qup_spi4_data_clk: qup-spi4-data-clk-state { |
| pins = "gpio16", "gpio17", "gpio18"; |
| function = "qup04"; |
| }; |
| |
| qup_spi4_cs: qup-spi4-cs-state { |
| pins = "gpio19"; |
| function = "qup04"; |
| }; |
| |
| qup_spi4_cs_gpio: qup-spi4-cs-gpio-state { |
| pins = "gpio19"; |
| function = "gpio"; |
| }; |
| |
| qup_spi5_data_clk: qup-spi5-data-clk-state { |
| pins = "gpio20", "gpio21", "gpio22"; |
| function = "qup05"; |
| }; |
| |
| qup_spi5_cs: qup-spi5-cs-state { |
| pins = "gpio23"; |
| function = "qup05"; |
| }; |
| |
| qup_spi5_cs_gpio: qup-spi5-cs-gpio-state { |
| pins = "gpio23"; |
| function = "gpio"; |
| }; |
| |
| qup_spi6_data_clk: qup-spi6-data-clk-state { |
| pins = "gpio24", "gpio25", "gpio26"; |
| function = "qup06"; |
| }; |
| |
| qup_spi6_cs: qup-spi6-cs-state { |
| pins = "gpio27"; |
| function = "qup06"; |
| }; |
| |
| qup_spi6_cs_gpio: qup-spi6-cs-gpio-state { |
| pins = "gpio27"; |
| function = "gpio"; |
| }; |
| |
| qup_spi7_data_clk: qup-spi7-data-clk-state { |
| pins = "gpio28", "gpio29", "gpio30"; |
| function = "qup07"; |
| }; |
| |
| qup_spi7_cs: qup-spi7-cs-state { |
| pins = "gpio31"; |
| function = "qup07"; |
| }; |
| |
| qup_spi7_cs_gpio: qup-spi7-cs-gpio-state { |
| pins = "gpio31"; |
| function = "gpio"; |
| }; |
| |
| qup_spi8_data_clk: qup-spi8-data-clk-state { |
| pins = "gpio32", "gpio33", "gpio34"; |
| function = "qup10"; |
| }; |
| |
| qup_spi8_cs: qup-spi8-cs-state { |
| pins = "gpio35"; |
| function = "qup10"; |
| }; |
| |
| qup_spi8_cs_gpio: qup-spi8-cs-gpio-state { |
| pins = "gpio35"; |
| function = "gpio"; |
| }; |
| |
| qup_spi9_data_clk: qup-spi9-data-clk-state { |
| pins = "gpio36", "gpio37", "gpio38"; |
| function = "qup11"; |
| }; |
| |
| qup_spi9_cs: qup-spi9-cs-state { |
| pins = "gpio39"; |
| function = "qup11"; |
| }; |
| |
| qup_spi9_cs_gpio: qup-spi9-cs-gpio-state { |
| pins = "gpio39"; |
| function = "gpio"; |
| }; |
| |
| qup_spi10_data_clk: qup-spi10-data-clk-state { |
| pins = "gpio40", "gpio41", "gpio42"; |
| function = "qup12"; |
| }; |
| |
| qup_spi10_cs: qup-spi10-cs-state { |
| pins = "gpio43"; |
| function = "qup12"; |
| }; |
| |
| qup_spi10_cs_gpio: qup-spi10-cs-gpio-state { |
| pins = "gpio43"; |
| function = "gpio"; |
| }; |
| |
| qup_spi11_data_clk: qup-spi11-data-clk-state { |
| pins = "gpio44", "gpio45", "gpio46"; |
| function = "qup13"; |
| }; |
| |
| qup_spi11_cs: qup-spi11-cs-state { |
| pins = "gpio47"; |
| function = "qup13"; |
| }; |
| |
| qup_spi11_cs_gpio: qup-spi11-cs-gpio-state { |
| pins = "gpio47"; |
| function = "gpio"; |
| }; |
| |
| qup_spi12_data_clk: qup-spi12-data-clk-state { |
| pins = "gpio48", "gpio49", "gpio50"; |
| function = "qup14"; |
| }; |
| |
| qup_spi12_cs: qup-spi12-cs-state { |
| pins = "gpio51"; |
| function = "qup14"; |
| }; |
| |
| qup_spi12_cs_gpio: qup-spi12-cs-gpio-state { |
| pins = "gpio51"; |
| function = "gpio"; |
| }; |
| |
| qup_spi13_data_clk: qup-spi13-data-clk-state { |
| pins = "gpio52", "gpio53", "gpio54"; |
| function = "qup15"; |
| }; |
| |
| qup_spi13_cs: qup-spi13-cs-state { |
| pins = "gpio55"; |
| function = "qup15"; |
| }; |
| |
| qup_spi13_cs_gpio: qup-spi13-cs-gpio-state { |
| pins = "gpio55"; |
| function = "gpio"; |
| }; |
| |
| qup_spi14_data_clk: qup-spi14-data-clk-state { |
| pins = "gpio56", "gpio57", "gpio58"; |
| function = "qup16"; |
| }; |
| |
| qup_spi14_cs: qup-spi14-cs-state { |
| pins = "gpio59"; |
| function = "qup16"; |
| }; |
| |
| qup_spi14_cs_gpio: qup-spi14-cs-gpio-state { |
| pins = "gpio59"; |
| function = "gpio"; |
| }; |
| |
| qup_spi15_data_clk: qup-spi15-data-clk-state { |
| pins = "gpio60", "gpio61", "gpio62"; |
| function = "qup17"; |
| }; |
| |
| qup_spi15_cs: qup-spi15-cs-state { |
| pins = "gpio63"; |
| function = "qup17"; |
| }; |
| |
| qup_spi15_cs_gpio: qup-spi15-cs-gpio-state { |
| pins = "gpio63"; |
| function = "gpio"; |
| }; |
| |
| qup_uart0_cts: qup-uart0-cts-state { |
| pins = "gpio0"; |
| function = "qup00"; |
| }; |
| |
| qup_uart0_rts: qup-uart0-rts-state { |
| pins = "gpio1"; |
| function = "qup00"; |
| }; |
| |
| qup_uart0_tx: qup-uart0-tx-state { |
| pins = "gpio2"; |
| function = "qup00"; |
| }; |
| |
| qup_uart0_rx: qup-uart0-rx-state { |
| pins = "gpio3"; |
| function = "qup00"; |
| }; |
| |
| qup_uart1_cts: qup-uart1-cts-state { |
| pins = "gpio4"; |
| function = "qup01"; |
| }; |
| |
| qup_uart1_rts: qup-uart1-rts-state { |
| pins = "gpio5"; |
| function = "qup01"; |
| }; |
| |
| qup_uart1_tx: qup-uart1-tx-state { |
| pins = "gpio6"; |
| function = "qup01"; |
| }; |
| |
| qup_uart1_rx: qup-uart1-rx-state { |
| pins = "gpio7"; |
| function = "qup01"; |
| }; |
| |
| qup_uart2_cts: qup-uart2-cts-state { |
| pins = "gpio8"; |
| function = "qup02"; |
| }; |
| |
| qup_uart2_rts: qup-uart2-rts-state { |
| pins = "gpio9"; |
| function = "qup02"; |
| }; |
| |
| qup_uart2_tx: qup-uart2-tx-state { |
| pins = "gpio10"; |
| function = "qup02"; |
| }; |
| |
| qup_uart2_rx: qup-uart2-rx-state { |
| pins = "gpio11"; |
| function = "qup02"; |
| }; |
| |
| qup_uart3_cts: qup-uart3-cts-state { |
| pins = "gpio12"; |
| function = "qup03"; |
| }; |
| |
| qup_uart3_rts: qup-uart3-rts-state { |
| pins = "gpio13"; |
| function = "qup03"; |
| }; |
| |
| qup_uart3_tx: qup-uart3-tx-state { |
| pins = "gpio14"; |
| function = "qup03"; |
| }; |
| |
| qup_uart3_rx: qup-uart3-rx-state { |
| pins = "gpio15"; |
| function = "qup03"; |
| }; |
| |
| qup_uart4_cts: qup-uart4-cts-state { |
| pins = "gpio16"; |
| function = "qup04"; |
| }; |
| |
| qup_uart4_rts: qup-uart4-rts-state { |
| pins = "gpio17"; |
| function = "qup04"; |
| }; |
| |
| qup_uart4_tx: qup-uart4-tx-state { |
| pins = "gpio18"; |
| function = "qup04"; |
| }; |
| |
| qup_uart4_rx: qup-uart4-rx-state { |
| pins = "gpio19"; |
| function = "qup04"; |
| }; |
| |
| qup_uart5_cts: qup-uart5-cts-state { |
| pins = "gpio20"; |
| function = "qup05"; |
| }; |
| |
| qup_uart5_rts: qup-uart5-rts-state { |
| pins = "gpio21"; |
| function = "qup05"; |
| }; |
| |
| qup_uart5_tx: qup-uart5-tx-state { |
| pins = "gpio22"; |
| function = "qup05"; |
| }; |
| |
| qup_uart5_rx: qup-uart5-rx-state { |
| pins = "gpio23"; |
| function = "qup05"; |
| }; |
| |
| qup_uart6_cts: qup-uart6-cts-state { |
| pins = "gpio24"; |
| function = "qup06"; |
| }; |
| |
| qup_uart6_rts: qup-uart6-rts-state { |
| pins = "gpio25"; |
| function = "qup06"; |
| }; |
| |
| qup_uart6_tx: qup-uart6-tx-state { |
| pins = "gpio26"; |
| function = "qup06"; |
| }; |
| |
| qup_uart6_rx: qup-uart6-rx-state { |
| pins = "gpio27"; |
| function = "qup06"; |
| }; |
| |
| qup_uart7_cts: qup-uart7-cts-state { |
| pins = "gpio28"; |
| function = "qup07"; |
| }; |
| |
| qup_uart7_rts: qup-uart7-rts-state { |
| pins = "gpio29"; |
| function = "qup07"; |
| }; |
| |
| qup_uart7_tx: qup-uart7-tx-state { |
| pins = "gpio30"; |
| function = "qup07"; |
| }; |
| |
| qup_uart7_rx: qup-uart7-rx-state { |
| pins = "gpio31"; |
| function = "qup07"; |
| }; |
| |
| qup_uart8_cts: qup-uart8-cts-state { |
| pins = "gpio32"; |
| function = "qup10"; |
| }; |
| |
| qup_uart8_rts: qup-uart8-rts-state { |
| pins = "gpio33"; |
| function = "qup10"; |
| }; |
| |
| qup_uart8_tx: qup-uart8-tx-state { |
| pins = "gpio34"; |
| function = "qup10"; |
| }; |
| |
| qup_uart8_rx: qup-uart8-rx-state { |
| pins = "gpio35"; |
| function = "qup10"; |
| }; |
| |
| qup_uart9_cts: qup-uart9-cts-state { |
| pins = "gpio36"; |
| function = "qup11"; |
| }; |
| |
| qup_uart9_rts: qup-uart9-rts-state { |
| pins = "gpio37"; |
| function = "qup11"; |
| }; |
| |
| qup_uart9_tx: qup-uart9-tx-state { |
| pins = "gpio38"; |
| function = "qup11"; |
| }; |
| |
| qup_uart9_rx: qup-uart9-rx-state { |
| pins = "gpio39"; |
| function = "qup11"; |
| }; |
| |
| qup_uart10_cts: qup-uart10-cts-state { |
| pins = "gpio40"; |
| function = "qup12"; |
| }; |
| |
| qup_uart10_rts: qup-uart10-rts-state { |
| pins = "gpio41"; |
| function = "qup12"; |
| }; |
| |
| qup_uart10_tx: qup-uart10-tx-state { |
| pins = "gpio42"; |
| function = "qup12"; |
| }; |
| |
| qup_uart10_rx: qup-uart10-rx-state { |
| pins = "gpio43"; |
| function = "qup12"; |
| }; |
| |
| qup_uart11_cts: qup-uart11-cts-state { |
| pins = "gpio44"; |
| function = "qup13"; |
| }; |
| |
| qup_uart11_rts: qup-uart11-rts-state { |
| pins = "gpio45"; |
| function = "qup13"; |
| }; |
| |
| qup_uart11_tx: qup-uart11-tx-state { |
| pins = "gpio46"; |
| function = "qup13"; |
| }; |
| |
| qup_uart11_rx: qup-uart11-rx-state { |
| pins = "gpio47"; |
| function = "qup13"; |
| }; |
| |
| qup_uart12_cts: qup-uart12-cts-state { |
| pins = "gpio48"; |
| function = "qup14"; |
| }; |
| |
| qup_uart12_rts: qup-uart12-rts-state { |
| pins = "gpio49"; |
| function = "qup14"; |
| }; |
| |
| qup_uart12_tx: qup-uart12-tx-state { |
| pins = "gpio50"; |
| function = "qup14"; |
| }; |
| |
| qup_uart12_rx: qup-uart12-rx-state { |
| pins = "gpio51"; |
| function = "qup14"; |
| }; |
| |
| qup_uart13_cts: qup-uart13-cts-state { |
| pins = "gpio52"; |
| function = "qup15"; |
| }; |
| |
| qup_uart13_rts: qup-uart13-rts-state { |
| pins = "gpio53"; |
| function = "qup15"; |
| }; |
| |
| qup_uart13_tx: qup-uart13-tx-state { |
| pins = "gpio54"; |
| function = "qup15"; |
| }; |
| |
| qup_uart13_rx: qup-uart13-rx-state { |
| pins = "gpio55"; |
| function = "qup15"; |
| }; |
| |
| qup_uart14_cts: qup-uart14-cts-state { |
| pins = "gpio56"; |
| function = "qup16"; |
| }; |
| |
| qup_uart14_rts: qup-uart14-rts-state { |
| pins = "gpio57"; |
| function = "qup16"; |
| }; |
| |
| qup_uart14_tx: qup-uart14-tx-state { |
| pins = "gpio58"; |
| function = "qup16"; |
| }; |
| |
| qup_uart14_rx: qup-uart14-rx-state { |
| pins = "gpio59"; |
| function = "qup16"; |
| }; |
| |
| qup_uart15_cts: qup-uart15-cts-state { |
| pins = "gpio60"; |
| function = "qup17"; |
| }; |
| |
| qup_uart15_rts: qup-uart15-rts-state { |
| pins = "gpio61"; |
| function = "qup17"; |
| }; |
| |
| qup_uart15_tx: qup-uart15-tx-state { |
| pins = "gpio62"; |
| function = "qup17"; |
| }; |
| |
| qup_uart15_rx: qup-uart15-rx-state { |
| pins = "gpio63"; |
| function = "qup17"; |
| }; |
| |
| sdc1_clk: sdc1-clk-state { |
| pins = "sdc1_clk"; |
| }; |
| |
| sdc1_cmd: sdc1-cmd-state { |
| pins = "sdc1_cmd"; |
| }; |
| |
| sdc1_data: sdc1-data-state { |
| pins = "sdc1_data"; |
| }; |
| |
| sdc1_rclk: sdc1-rclk-state { |
| pins = "sdc1_rclk"; |
| }; |
| |
| sdc1_clk_sleep: sdc1-clk-sleep-state { |
| pins = "sdc1_clk"; |
| drive-strength = <2>; |
| bias-bus-hold; |
| }; |
| |
| sdc1_cmd_sleep: sdc1-cmd-sleep-state { |
| pins = "sdc1_cmd"; |
| drive-strength = <2>; |
| bias-bus-hold; |
| }; |
| |
| sdc1_data_sleep: sdc1-data-sleep-state { |
| pins = "sdc1_data"; |
| drive-strength = <2>; |
| bias-bus-hold; |
| }; |
| |
| sdc1_rclk_sleep: sdc1-rclk-sleep-state { |
| pins = "sdc1_rclk"; |
| drive-strength = <2>; |
| bias-bus-hold; |
| }; |
| |
| sdc2_clk: sdc2-clk-state { |
| pins = "sdc2_clk"; |
| }; |
| |
| sdc2_cmd: sdc2-cmd-state { |
| pins = "sdc2_cmd"; |
| }; |
| |
| sdc2_data: sdc2-data-state { |
| pins = "sdc2_data"; |
| }; |
| |
| sdc2_clk_sleep: sdc2-clk-sleep-state { |
| pins = "sdc2_clk"; |
| drive-strength = <2>; |
| bias-bus-hold; |
| }; |
| |
| sdc2_cmd_sleep: sdc2-cmd-sleep-state { |
| pins = "sdc2_cmd"; |
| drive-strength = <2>; |
| bias-bus-hold; |
| }; |
| |
| sdc2_data_sleep: sdc2-data-sleep-state { |
| pins = "sdc2_data"; |
| drive-strength = <2>; |
| bias-bus-hold; |
| }; |
| }; |
| |
| sram@146a5000 { |
| compatible = "qcom,sc7280-imem", "syscon", "simple-mfd"; |
| reg = <0 0x146a5000 0 0x6000>; |
| |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| ranges = <0 0 0x146a5000 0x6000>; |
| |
| pil-reloc@594c { |
| compatible = "qcom,pil-reloc-info"; |
| reg = <0x594c 0xc8>; |
| }; |
| }; |
| |
| apps_smmu: iommu@15000000 { |
| compatible = "qcom,sc7280-smmu-500", "arm,mmu-500"; |
| reg = <0 0x15000000 0 0x100000>; |
| #iommu-cells = <2>; |
| #global-interrupts = <1>; |
| dma-coherent; |
| interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| intc: interrupt-controller@17a00000 { |
| compatible = "arm,gic-v3"; |
| reg = <0 0x17a00000 0 0x10000>, /* GICD */ |
| <0 0x17a60000 0 0x100000>; /* GICR * 8 */ |
| interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>; |
| #interrupt-cells = <3>; |
| interrupt-controller; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| msi-controller@17a40000 { |
| compatible = "arm,gic-v3-its"; |
| reg = <0 0x17a40000 0 0x20000>; |
| msi-controller; |
| #msi-cells = <1>; |
| status = "disabled"; |
| }; |
| }; |
| |
| watchdog@17c10000 { |
| compatible = "qcom,apss-wdt-sc7280", "qcom,kpss-wdt"; |
| reg = <0 0x17c10000 0 0x1000>; |
| clocks = <&sleep_clk>; |
| interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| timer@17c20000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0 0 0x20000000>; |
| compatible = "arm,armv7-timer-mem"; |
| reg = <0 0x17c20000 0 0x1000>; |
| |
| frame@17c21000 { |
| frame-number = <0>; |
| interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0x17c21000 0x1000>, |
| <0x17c22000 0x1000>; |
| }; |
| |
| frame@17c23000 { |
| frame-number = <1>; |
| interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0x17c23000 0x1000>; |
| status = "disabled"; |
| }; |
| |
| frame@17c25000 { |
| frame-number = <2>; |
| interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0x17c25000 0x1000>; |
| status = "disabled"; |
| }; |
| |
| frame@17c27000 { |
| frame-number = <3>; |
| interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0x17c27000 0x1000>; |
| status = "disabled"; |
| }; |
| |
| frame@17c29000 { |
| frame-number = <4>; |
| interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0x17c29000 0x1000>; |
| status = "disabled"; |
| }; |
| |
| frame@17c2b000 { |
| frame-number = <5>; |
| interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0x17c2b000 0x1000>; |
| status = "disabled"; |
| }; |
| |
| frame@17c2d000 { |
| frame-number = <6>; |
| interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0x17c2d000 0x1000>; |
| status = "disabled"; |
| }; |
| }; |
| |
| apps_rsc: rsc@18200000 { |
| compatible = "qcom,rpmh-rsc"; |
| reg = <0 0x18200000 0 0x10000>, |
| <0 0x18210000 0 0x10000>, |
| <0 0x18220000 0 0x10000>; |
| reg-names = "drv-0", "drv-1", "drv-2"; |
| interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; |
| qcom,tcs-offset = <0xd00>; |
| qcom,drv-id = <2>; |
| qcom,tcs-config = <ACTIVE_TCS 2>, |
| <SLEEP_TCS 3>, |
| <WAKE_TCS 3>, |
| <CONTROL_TCS 1>; |
| |
| apps_bcm_voter: bcm-voter { |
| compatible = "qcom,bcm-voter"; |
| }; |
| |
| rpmhpd: power-controller { |
| compatible = "qcom,sc7280-rpmhpd"; |
| #power-domain-cells = <1>; |
| operating-points-v2 = <&rpmhpd_opp_table>; |
| |
| rpmhpd_opp_table: opp-table { |
| compatible = "operating-points-v2"; |
| |
| rpmhpd_opp_ret: opp1 { |
| opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>; |
| }; |
| |
| rpmhpd_opp_low_svs: opp2 { |
| opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; |
| }; |
| |
| rpmhpd_opp_svs: opp3 { |
| opp-level = <RPMH_REGULATOR_LEVEL_SVS>; |
| }; |
| |
| rpmhpd_opp_svs_l1: opp4 { |
| opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; |
| }; |
| |
| rpmhpd_opp_svs_l2: opp5 { |
| opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>; |
| }; |
| |
| rpmhpd_opp_nom: opp6 { |
| opp-level = <RPMH_REGULATOR_LEVEL_NOM>; |
| }; |
| |
| rpmhpd_opp_nom_l1: opp7 { |
| opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; |
| }; |
| |
| rpmhpd_opp_turbo: opp8 { |
| opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; |
| }; |
| |
| rpmhpd_opp_turbo_l1: opp9 { |
| opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; |
| }; |
| }; |
| }; |
| |
| rpmhcc: clock-controller { |
| compatible = "qcom,sc7280-rpmh-clk"; |
| clocks = <&xo_board>; |
| clock-names = "xo"; |
| #clock-cells = <1>; |
| }; |
| }; |
| |
| epss_l3: interconnect@18590000 { |
| compatible = "qcom,sc7280-epss-l3", "qcom,epss-l3"; |
| reg = <0 0x18590000 0 0x1000>; |
| clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>; |
| clock-names = "xo", "alternate"; |
| #interconnect-cells = <1>; |
| }; |
| |
| cpufreq_hw: cpufreq@18591000 { |
| compatible = "qcom,sc7280-cpufreq-epss", "qcom,cpufreq-epss"; |
| reg = <0 0x18591000 0 0x1000>, |
| <0 0x18592000 0 0x1000>, |
| <0 0x18593000 0 0x1000>; |
| clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>; |
| clock-names = "xo", "alternate"; |
| #freq-domain-cells = <1>; |
| #clock-cells = <1>; |
| }; |
| }; |
| |
| thermal_zones: thermal-zones { |
| cpu0-thermal { |
| polling-delay-passive = <250>; |
| polling-delay = <0>; |
| |
| thermal-sensors = <&tsens0 1>; |
| |
| trips { |
| cpu0_alert0: trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| cpu0_alert1: trip-point1 { |
| temperature = <95000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| cpu0_crit: cpu-crit { |
| temperature = <110000>; |
| hysteresis = <0>; |
| type = "critical"; |
| }; |
| }; |
| |
| cooling-maps { |
| map0 { |
| trip = <&cpu0_alert0>; |
| cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| }; |
| map1 { |
| trip = <&cpu0_alert1>; |
| cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| }; |
| }; |
| }; |
| |
| cpu1-thermal { |
| polling-delay-passive = <250>; |
| polling-delay = <0>; |
| |
| thermal-sensors = <&tsens0 2>; |
| |
| trips { |
| cpu1_alert0: trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| cpu1_alert1: trip-point1 { |
| temperature = <95000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| cpu1_crit: cpu-crit { |
| temperature = <110000>; |
| hysteresis = <0>; |
| type = "critical"; |
| }; |
| }; |
| |
| cooling-maps { |
| map0 { |
| trip = <&cpu1_alert0>; |
| cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| }; |
| map1 { |
| trip = <&cpu1_alert1>; |
| cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| }; |
| }; |
| }; |
| |
| cpu2-thermal { |
| polling-delay-passive = <250>; |
| polling-delay = <0>; |
| |
| thermal-sensors = <&tsens0 3>; |
| |
| trips { |
| cpu2_alert0: trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| cpu2_alert1: trip-point1 { |
| temperature = <95000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| cpu2_crit: cpu-crit { |
| temperature = <110000>; |
| hysteresis = <0>; |
| type = "critical"; |
| }; |
| }; |
| |
| cooling-maps { |
| map0 { |
| trip = <&cpu2_alert0>; |
| cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| }; |
| map1 { |
| trip = <&cpu2_alert1>; |
| cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| }; |
| }; |
| }; |
| |
| cpu3-thermal { |
| polling-delay-passive = <250>; |
| polling-delay = <0>; |
| |
| thermal-sensors = <&tsens0 4>; |
| |
| trips { |
| cpu3_alert0: trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| cpu3_alert1: trip-point1 { |
| temperature = <95000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| cpu3_crit: cpu-crit { |
| temperature = <110000>; |
| hysteresis = <0>; |
| type = "critical"; |
| }; |
| }; |
| |
| cooling-maps { |
| map0 { |
| trip = <&cpu3_alert0>; |
| cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| }; |
| map1 { |
| trip = <&cpu3_alert1>; |
| cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| }; |
| }; |
| }; |
| |
| cpu4-thermal { |
| polling-delay-passive = <250>; |
| polling-delay = <0>; |
| |
| thermal-sensors = <&tsens0 7>; |
| |
| trips { |
| cpu4_alert0: trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| cpu4_alert1: trip-point1 { |
| temperature = <95000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| cpu4_crit: cpu-crit { |
| temperature = <110000>; |
| hysteresis = <0>; |
| type = "critical"; |
| }; |
| }; |
| |
| cooling-maps { |
| map0 { |
| trip = <&cpu4_alert0>; |
| cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| }; |
| map1 { |
| trip = <&cpu4_alert1>; |
| cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| }; |
| }; |
| }; |
| |
| cpu5-thermal { |
| polling-delay-passive = <250>; |
| polling-delay = <0>; |
| |
| thermal-sensors = <&tsens0 8>; |
| |
| trips { |
| cpu5_alert0: trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| cpu5_alert1: trip-point1 { |
| temperature = <95000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| cpu5_crit: cpu-crit { |
| temperature = <110000>; |
| hysteresis = <0>; |
| type = "critical"; |
| }; |
| }; |
| |
| cooling-maps { |
| map0 { |
| trip = <&cpu5_alert0>; |
| cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| }; |
| map1 { |
| trip = <&cpu5_alert1>; |
| cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| }; |
| }; |
| }; |
| |
| cpu6-thermal { |
| polling-delay-passive = <250>; |
| polling-delay = <0>; |
| |
| thermal-sensors = <&tsens0 9>; |
| |
| trips { |
| cpu6_alert0: trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| cpu6_alert1: trip-point1 { |
| temperature = <95000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| cpu6_crit: cpu-crit { |
| temperature = <110000>; |
| hysteresis = <0>; |
| type = "critical"; |
| }; |
| }; |
| |
| cooling-maps { |
| map0 { |
| trip = <&cpu6_alert0>; |
| cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| }; |
| map1 { |
| trip = <&cpu6_alert1>; |
| cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| }; |
| }; |
| }; |
| |
| cpu7-thermal { |
| polling-delay-passive = <250>; |
| polling-delay = <0>; |
| |
| thermal-sensors = <&tsens0 10>; |
| |
| trips { |
| cpu7_alert0: trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| cpu7_alert1: trip-point1 { |
| temperature = <95000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| cpu7_crit: cpu-crit { |
| temperature = <110000>; |
| hysteresis = <0>; |
| type = "critical"; |
| }; |
| }; |
| |
| cooling-maps { |
| map0 { |
| trip = <&cpu7_alert0>; |
| cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| }; |
| map1 { |
| trip = <&cpu7_alert1>; |
| cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| }; |
| }; |
| }; |
| |
| cpu8-thermal { |
| polling-delay-passive = <250>; |
| polling-delay = <0>; |
| |
| thermal-sensors = <&tsens0 11>; |
| |
| trips { |
| cpu8_alert0: trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| cpu8_alert1: trip-point1 { |
| temperature = <95000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| cpu8_crit: cpu-crit { |
| temperature = <110000>; |
| hysteresis = <0>; |
| type = "critical"; |
| }; |
| }; |
| |
| cooling-maps { |
| map0 { |
| trip = <&cpu8_alert0>; |
| cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| }; |
| map1 { |
| trip = <&cpu8_alert1>; |
| cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| }; |
| }; |
| }; |
| |
| cpu9-thermal { |
| polling-delay-passive = <250>; |
| polling-delay = <0>; |
| |
| thermal-sensors = <&tsens0 12>; |
| |
| trips { |
| cpu9_alert0: trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| cpu9_alert1: trip-point1 { |
| temperature = <95000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| cpu9_crit: cpu-crit { |
| temperature = <110000>; |
| hysteresis = <0>; |
| type = "critical"; |
| }; |
| }; |
| |
| cooling-maps { |
| map0 { |
| trip = <&cpu9_alert0>; |
| cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| }; |
| map1 { |
| trip = <&cpu9_alert1>; |
| cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| }; |
| }; |
| }; |
| |
| cpu10-thermal { |
| polling-delay-passive = <250>; |
| polling-delay = <0>; |
| |
| thermal-sensors = <&tsens0 13>; |
| |
| trips { |
| cpu10_alert0: trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| cpu10_alert1: trip-point1 { |
| temperature = <95000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| cpu10_crit: cpu-crit { |
| temperature = <110000>; |
| hysteresis = <0>; |
| type = "critical"; |
| }; |
| }; |
| |
| cooling-maps { |
| map0 { |
| trip = <&cpu10_alert0>; |
| cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| }; |
| map1 { |
| trip = <&cpu10_alert1>; |
| cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| }; |
| }; |
| }; |
| |
| cpu11-thermal { |
| polling-delay-passive = <250>; |
| polling-delay = <0>; |
| |
| thermal-sensors = <&tsens0 14>; |
| |
| trips { |
| cpu11_alert0: trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| cpu11_alert1: trip-point1 { |
| temperature = <95000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| cpu11_crit: cpu-crit { |
| temperature = <110000>; |
| hysteresis = <0>; |
| type = "critical"; |
| }; |
| }; |
| |
| cooling-maps { |
| map0 { |
| trip = <&cpu11_alert0>; |
| cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| }; |
| map1 { |
| trip = <&cpu11_alert1>; |
| cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| }; |
| }; |
| }; |
| |
| aoss0-thermal { |
| polling-delay-passive = <0>; |
| polling-delay = <0>; |
| |
| thermal-sensors = <&tsens0 0>; |
| |
| trips { |
| aoss0_alert0: trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "hot"; |
| }; |
| |
| aoss0_crit: aoss0-crit { |
| temperature = <110000>; |
| hysteresis = <0>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| aoss1-thermal { |
| polling-delay-passive = <0>; |
| polling-delay = <0>; |
| |
| thermal-sensors = <&tsens1 0>; |
| |
| trips { |
| aoss1_alert0: trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "hot"; |
| }; |
| |
| aoss1_crit: aoss1-crit { |
| temperature = <110000>; |
| hysteresis = <0>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| cpuss0-thermal { |
| polling-delay-passive = <0>; |
| polling-delay = <0>; |
| |
| thermal-sensors = <&tsens0 5>; |
| |
| trips { |
| cpuss0_alert0: trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "hot"; |
| }; |
| cpuss0_crit: cluster0-crit { |
| temperature = <110000>; |
| hysteresis = <0>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| cpuss1-thermal { |
| polling-delay-passive = <0>; |
| polling-delay = <0>; |
| |
| thermal-sensors = <&tsens0 6>; |
| |
| trips { |
| cpuss1_alert0: trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "hot"; |
| }; |
| cpuss1_crit: cluster0-crit { |
| temperature = <110000>; |
| hysteresis = <0>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| gpuss0-thermal { |
| polling-delay-passive = <100>; |
| polling-delay = <0>; |
| |
| thermal-sensors = <&tsens1 1>; |
| |
| trips { |
| gpuss0_alert0: trip-point0 { |
| temperature = <95000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| gpuss0_crit: gpuss0-crit { |
| temperature = <110000>; |
| hysteresis = <0>; |
| type = "critical"; |
| }; |
| }; |
| |
| cooling-maps { |
| map0 { |
| trip = <&gpuss0_alert0>; |
| cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| }; |
| }; |
| }; |
| |
| gpuss1-thermal { |
| polling-delay-passive = <100>; |
| polling-delay = <0>; |
| |
| thermal-sensors = <&tsens1 2>; |
| |
| trips { |
| gpuss1_alert0: trip-point0 { |
| temperature = <95000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| gpuss1_crit: gpuss1-crit { |
| temperature = <110000>; |
| hysteresis = <0>; |
| type = "critical"; |
| }; |
| }; |
| |
| cooling-maps { |
| map0 { |
| trip = <&gpuss1_alert0>; |
| cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| }; |
| }; |
| }; |
| |
| nspss0-thermal { |
| polling-delay-passive = <0>; |
| polling-delay = <0>; |
| |
| thermal-sensors = <&tsens1 3>; |
| |
| trips { |
| nspss0_alert0: trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "hot"; |
| }; |
| |
| nspss0_crit: nspss0-crit { |
| temperature = <110000>; |
| hysteresis = <0>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| nspss1-thermal { |
| polling-delay-passive = <0>; |
| polling-delay = <0>; |
| |
| thermal-sensors = <&tsens1 4>; |
| |
| trips { |
| nspss1_alert0: trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "hot"; |
| }; |
| |
| nspss1_crit: nspss1-crit { |
| temperature = <110000>; |
| hysteresis = <0>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| video-thermal { |
| polling-delay-passive = <0>; |
| polling-delay = <0>; |
| |
| thermal-sensors = <&tsens1 5>; |
| |
| trips { |
| video_alert0: trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "hot"; |
| }; |
| |
| video_crit: video-crit { |
| temperature = <110000>; |
| hysteresis = <0>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| ddr-thermal { |
| polling-delay-passive = <0>; |
| polling-delay = <0>; |
| |
| thermal-sensors = <&tsens1 6>; |
| |
| trips { |
| ddr_alert0: trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "hot"; |
| }; |
| |
| ddr_crit: ddr-crit { |
| temperature = <110000>; |
| hysteresis = <0>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| mdmss0-thermal { |
| polling-delay-passive = <0>; |
| polling-delay = <0>; |
| |
| thermal-sensors = <&tsens1 7>; |
| |
| trips { |
| mdmss0_alert0: trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "hot"; |
| }; |
| |
| mdmss0_crit: mdmss0-crit { |
| temperature = <110000>; |
| hysteresis = <0>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| mdmss1-thermal { |
| polling-delay-passive = <0>; |
| polling-delay = <0>; |
| |
| thermal-sensors = <&tsens1 8>; |
| |
| trips { |
| mdmss1_alert0: trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "hot"; |
| }; |
| |
| mdmss1_crit: mdmss1-crit { |
| temperature = <110000>; |
| hysteresis = <0>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| mdmss2-thermal { |
| polling-delay-passive = <0>; |
| polling-delay = <0>; |
| |
| thermal-sensors = <&tsens1 9>; |
| |
| trips { |
| mdmss2_alert0: trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "hot"; |
| }; |
| |
| mdmss2_crit: mdmss2-crit { |
| temperature = <110000>; |
| hysteresis = <0>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| mdmss3-thermal { |
| polling-delay-passive = <0>; |
| polling-delay = <0>; |
| |
| thermal-sensors = <&tsens1 10>; |
| |
| trips { |
| mdmss3_alert0: trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "hot"; |
| }; |
| |
| mdmss3_crit: mdmss3-crit { |
| temperature = <110000>; |
| hysteresis = <0>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| camera0-thermal { |
| polling-delay-passive = <0>; |
| polling-delay = <0>; |
| |
| thermal-sensors = <&tsens1 11>; |
| |
| trips { |
| camera0_alert0: trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "hot"; |
| }; |
| |
| camera0_crit: camera0-crit { |
| temperature = <110000>; |
| hysteresis = <0>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| }; |
| |
| timer { |
| compatible = "arm,armv8-timer"; |
| interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, |
| <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, |
| <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, |
| <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; |
| }; |
| }; |