Google Git
Sign in
android-kvm / linux / 7137d8b084e2d7d515e550f7268e2c907527a6d2 / . / arch / arm64 / boot / dts / qcom / sm8550.dtsi
blob: d115960bdeec8a7edd3dd00a30a388147588c421 [file] [log] [blame]
// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2022, Linaro Limited
*/
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/clock/qcom,sm8450-videocc.h>
#include <dt-bindings/clock/qcom,sm8550-gcc.h>
#include <dt-bindings/clock/qcom,sm8550-gpucc.h>
#include <dt-bindings/clock/qcom,sm8550-tcsr.h>
#include <dt-bindings/clock/qcom,sm8550-dispcc.h>
#include <dt-bindings/dma/qcom-gpi.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interconnect/qcom,sm8550-rpmh.h>
#include <dt-bindings/mailbox/qcom-ipcc.h>
#include <dt-bindings/power/qcom-rpmpd.h>
#include <dt-bindings/power/qcom,rpmhpd.h>
#include <dt-bindings/soc/qcom,gpr.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
#include <dt-bindings/phy/phy-qcom-qmp.h>
#include <dt-bindings/thermal/thermal.h>
/ {
interrupt-parent = <&intc>;
#address-cells = <2>;
#size-cells = <2>;
chosen { };
clocks {
xo_board: xo-board {
compatible = "fixed-clock";
#clock-cells = <0>;
};
sleep_clk: sleep-clk {
compatible = "fixed-clock";
#clock-cells = <0>;
};
bi_tcxo_div2: bi-tcxo-div2-clk {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clocks = <&rpmhcc RPMH_CXO_CLK>;
clock-mult = <1>;
clock-div = <2>;
};
bi_tcxo_ao_div2: bi-tcxo-ao-div2-clk {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clocks = <&rpmhcc RPMH_CXO_CLK_A>;
clock-mult = <1>;
clock-div = <2>;
};
pcie_1_phy_aux_clk: pcie-1-phy-aux-clk {
compatible = "fixed-clock";
#clock-cells = <0>;
};
};
cpus {
#address-cells = <2>;
#size-cells = <0>;
CPU0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a510";
reg = <0 0>;
clocks = <&cpufreq_hw 0>;
enable-method = "psci";
next-level-cache = <&L2_0>;
power-domains = <&CPU_PD0>;
power-domain-names = "psci";
qcom,freq-domain = <&cpufreq_hw 0>;
capacity-dmips-mhz = <1024>;
dynamic-power-coefficient = <100>;
#cooling-cells = <2>;
L2_0: l2-cache {
compatible = "cache";
cache-level = <2>;
cache-unified;
next-level-cache = <&L3_0>;
L3_0: l3-cache {
compatible = "cache";
cache-level = <3>;
cache-unified;
};
};
};
CPU1: cpu@100 {
device_type = "cpu";
compatible = "arm,cortex-a510";
reg = <0 0x100>;
clocks = <&cpufreq_hw 0>;
enable-method = "psci";
next-level-cache = <&L2_100>;
power-domains = <&CPU_PD1>;
power-domain-names = "psci";
qcom,freq-domain = <&cpufreq_hw 0>;
capacity-dmips-mhz = <1024>;
dynamic-power-coefficient = <100>;
#cooling-cells = <2>;
L2_100: l2-cache {
compatible = "cache";
cache-level = <2>;
cache-unified;
next-level-cache = <&L3_0>;
};
};
CPU2: cpu@200 {
device_type = "cpu";
compatible = "arm,cortex-a510";
reg = <0 0x200>;
clocks = <&cpufreq_hw 0>;
enable-method = "psci";
next-level-cache = <&L2_200>;
power-domains = <&CPU_PD2>;
power-domain-names = "psci";
qcom,freq-domain = <&cpufreq_hw 0>;
capacity-dmips-mhz = <1024>;
dynamic-power-coefficient = <100>;
#cooling-cells = <2>;
L2_200: l2-cache {
compatible = "cache";
cache-level = <2>;
cache-unified;
next-level-cache = <&L3_0>;
};
};
CPU3: cpu@300 {
device_type = "cpu";
compatible = "arm,cortex-a715";
reg = <0 0x300>;
clocks = <&cpufreq_hw 1>;
enable-method = "psci";
next-level-cache = <&L2_300>;
power-domains = <&CPU_PD3>;
power-domain-names = "psci";
qcom,freq-domain = <&cpufreq_hw 1>;
capacity-dmips-mhz = <1792>;
dynamic-power-coefficient = <270>;
#cooling-cells = <2>;
L2_300: l2-cache {
compatible = "cache";
cache-level = <2>;
cache-unified;
next-level-cache = <&L3_0>;
};
};
CPU4: cpu@400 {
device_type = "cpu";
compatible = "arm,cortex-a715";
reg = <0 0x400>;
clocks = <&cpufreq_hw 1>;
enable-method = "psci";
next-level-cache = <&L2_400>;
power-domains = <&CPU_PD4>;
power-domain-names = "psci";
qcom,freq-domain = <&cpufreq_hw 1>;
capacity-dmips-mhz = <1792>;
dynamic-power-coefficient = <270>;
#cooling-cells = <2>;
L2_400: l2-cache {
compatible = "cache";
cache-level = <2>;
cache-unified;
next-level-cache = <&L3_0>;
};
};
CPU5: cpu@500 {
device_type = "cpu";
compatible = "arm,cortex-a710";
reg = <0 0x500>;
clocks = <&cpufreq_hw 1>;
enable-method = "psci";
next-level-cache = <&L2_500>;
power-domains = <&CPU_PD5>;
power-domain-names = "psci";
qcom,freq-domain = <&cpufreq_hw 1>;
capacity-dmips-mhz = <1792>;
dynamic-power-coefficient = <270>;
#cooling-cells = <2>;
L2_500: l2-cache {
compatible = "cache";
cache-level = <2>;
cache-unified;
next-level-cache = <&L3_0>;
};
};
CPU6: cpu@600 {
device_type = "cpu";
compatible = "arm,cortex-a710";
reg = <0 0x600>;
clocks = <&cpufreq_hw 1>;
enable-method = "psci";
next-level-cache = <&L2_600>;
power-domains = <&CPU_PD6>;
power-domain-names = "psci";
qcom,freq-domain = <&cpufreq_hw 1>;
capacity-dmips-mhz = <1792>;
dynamic-power-coefficient = <270>;
#cooling-cells = <2>;
L2_600: l2-cache {
compatible = "cache";
cache-level = <2>;
cache-unified;
next-level-cache = <&L3_0>;
};
};
CPU7: cpu@700 {
device_type = "cpu";
compatible = "arm,cortex-x3";
reg = <0 0x700>;
clocks = <&cpufreq_hw 2>;
enable-method = "psci";
next-level-cache = <&L2_700>;
power-domains = <&CPU_PD7>;
power-domain-names = "psci";
qcom,freq-domain = <&cpufreq_hw 2>;
capacity-dmips-mhz = <1894>;
dynamic-power-coefficient = <588>;
#cooling-cells = <2>;
L2_700: l2-cache {
compatible = "cache";
cache-level = <2>;
cache-unified;
next-level-cache = <&L3_0>;
};
};
cpu-map {
cluster0 {
core0 {
cpu = <&CPU0>;
};
core1 {
cpu = <&CPU1>;
};
core2 {
cpu = <&CPU2>;
};
core3 {
cpu = <&CPU3>;
};
core4 {
cpu = <&CPU4>;
};
core5 {
cpu = <&CPU5>;
};
core6 {
cpu = <&CPU6>;
};
core7 {
cpu = <&CPU7>;
};
};
};
idle-states {
entry-method = "psci";
LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
compatible = "arm,idle-state";
idle-state-name = "silver-rail-power-collapse";
arm,psci-suspend-param = <0x40000004>;
entry-latency-us = <800>;
exit-latency-us = <750>;
min-residency-us = <4090>;
local-timer-stop;
};
BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
compatible = "arm,idle-state";
idle-state-name = "gold-rail-power-collapse";
arm,psci-suspend-param = <0x40000004>;
entry-latency-us = <600>;
exit-latency-us = <1550>;
min-residency-us = <4791>;
local-timer-stop;
};
};
domain-idle-states {
CLUSTER_SLEEP_0: cluster-sleep-0 {
compatible = "domain-idle-state";
arm,psci-suspend-param = <0x41000044>;
entry-latency-us = <1050>;
exit-latency-us = <2500>;
min-residency-us = <5309>;
};
CLUSTER_SLEEP_1: cluster-sleep-1 {
compatible = "domain-idle-state";
arm,psci-suspend-param = <0x4100c344>;
entry-latency-us = <2700>;
exit-latency-us = <3500>;
min-residency-us = <13959>;
};
};
};
firmware {
scm: scm {
compatible = "qcom,scm-sm8550", "qcom,scm";
interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>;
};
};
clk_virt: interconnect-0 {
compatible = "qcom,sm8550-clk-virt";
#interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
mc_virt: interconnect-1 {
compatible = "qcom,sm8550-mc-virt";
#interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
memory@a0000000 {
device_type = "memory";
/* We expect the bootloader to fill in the size */
reg = <0 0xa0000000 0 0>;
};
pmu {
compatible = "arm,armv8-pmuv3";
interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
};
psci {
compatible = "arm,psci-1.0";
method = "smc";
CPU_PD0: power-domain-cpu0 {
#power-domain-cells = <0>;
power-domains = <&CLUSTER_PD>;
domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
};
CPU_PD1: power-domain-cpu1 {
#power-domain-cells = <0>;
power-domains = <&CLUSTER_PD>;
domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
};
CPU_PD2: power-domain-cpu2 {
#power-domain-cells = <0>;
power-domains = <&CLUSTER_PD>;
domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
};
CPU_PD3: power-domain-cpu3 {
#power-domain-cells = <0>;
power-domains = <&CLUSTER_PD>;
domain-idle-states = <&BIG_CPU_SLEEP_0>;
};
CPU_PD4: power-domain-cpu4 {
#power-domain-cells = <0>;
power-domains = <&CLUSTER_PD>;
domain-idle-states = <&BIG_CPU_SLEEP_0>;
};
CPU_PD5: power-domain-cpu5 {
#power-domain-cells = <0>;
power-domains = <&CLUSTER_PD>;
domain-idle-states = <&BIG_CPU_SLEEP_0>;
};
CPU_PD6: power-domain-cpu6 {
#power-domain-cells = <0>;
power-domains = <&CLUSTER_PD>;
domain-idle-states = <&BIG_CPU_SLEEP_0>;
};
CPU_PD7: power-domain-cpu7 {
#power-domain-cells = <0>;
power-domains = <&CLUSTER_PD>;
domain-idle-states = <&BIG_CPU_SLEEP_0>;
};
CLUSTER_PD: power-domain-cluster {
#power-domain-cells = <0>;
domain-idle-states = <&CLUSTER_SLEEP_0>, <&CLUSTER_SLEEP_1>;
};
};
reserved_memory: reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
hyp_mem: hyp-region@80000000 {
reg = <0 0x80000000 0 0xa00000>;
no-map;
};
cpusys_vm_mem: cpusys-vm-region@80a00000 {
reg = <0 0x80a00000 0 0x400000>;
no-map;
};
hyp_tags_mem: hyp-tags-region@80e00000 {
reg = <0 0x80e00000 0 0x3d0000>;
no-map;
};
xbl_sc_mem: xbl-sc-region@d8100000 {
reg = <0 0xd8100000 0 0x40000>;
no-map;
};
hyp_tags_reserved_mem: hyp-tags-reserved-region@811d0000 {
reg = <0 0x811d0000 0 0x30000>;
no-map;
};
/* merged xbl_dt_log, xbl_ramdump, aop_image */
xbl_dt_log_merged_mem: xbl-dt-log-merged-region@81a00000 {
reg = <0 0x81a00000 0 0x260000>;
no-map;
};
aop_cmd_db_mem: aop-cmd-db-region@81c60000 {
compatible = "qcom,cmd-db";
reg = <0 0x81c60000 0 0x20000>;
no-map;
};
/* merged aop_config, tme_crash_dump, tme_log, uefi_log */
aop_config_merged_mem: aop-config-merged-region@81c80000 {
reg = <0 0x81c80000 0 0x74000>;
no-map;
};
/* secdata region can be reused by apps */
smem: smem@81d00000 {
compatible = "qcom,smem";
reg = <0 0x81d00000 0 0x200000>;
hwlocks = <&tcsr_mutex 3>;
no-map;
};
adsp_mhi_mem: adsp-mhi-region@81f00000 {
reg = <0 0x81f00000 0 0x20000>;
no-map;
};
global_sync_mem: global-sync-region@82600000 {
reg = <0 0x82600000 0 0x100000>;
no-map;
};
tz_stat_mem: tz-stat-region@82700000 {
reg = <0 0x82700000 0 0x100000>;
no-map;
};
cdsp_secure_heap_mem: cdsp-secure-heap-region@82800000 {
reg = <0 0x82800000 0 0x4600000>;
no-map;
};
mpss_mem: mpss-region@8a800000 {
reg = <0 0x8a800000 0 0x10800000>;
no-map;
};
q6_mpss_dtb_mem: q6-mpss-dtb-region@9b000000 {
reg = <0 0x9b000000 0 0x80000>;
no-map;
};
ipa_fw_mem: ipa-fw-region@9b080000 {
reg = <0 0x9b080000 0 0x10000>;
no-map;
};
ipa_gsi_mem: ipa-gsi-region@9b090000 {
reg = <0 0x9b090000 0 0xa000>;
no-map;
};
gpu_micro_code_mem: gpu-micro-code-region@9b09a000 {
reg = <0 0x9b09a000 0 0x2000>;
no-map;
};
spss_region_mem: spss-region@9b100000 {
reg = <0 0x9b100000 0 0x180000>;
no-map;
};
/* First part of the "SPU secure shared memory" region */
spu_tz_shared_mem: spu-tz-shared-region@9b280000 {
reg = <0 0x9b280000 0 0x60000>;
no-map;
};
/* Second part of the "SPU secure shared memory" region */
spu_modem_shared_mem: spu-modem-shared-region@9b2e0000 {
reg = <0 0x9b2e0000 0 0x20000>;
no-map;
};
camera_mem: camera-region@9b300000 {
reg = <0 0x9b300000 0 0x800000>;
no-map;
};
video_mem: video-region@9bb00000 {
reg = <0 0x9bb00000 0 0x700000>;
no-map;
};
cvp_mem: cvp-region@9c200000 {
reg = <0 0x9c200000 0 0x700000>;
no-map;
};
cdsp_mem: cdsp-region@9c900000 {
reg = <0 0x9c900000 0 0x2000000>;
no-map;
};
q6_cdsp_dtb_mem: q6-cdsp-dtb-region@9e900000 {
reg = <0 0x9e900000 0 0x80000>;
no-map;
};
q6_adsp_dtb_mem: q6-adsp-dtb-region@9e980000 {
reg = <0 0x9e980000 0 0x80000>;
no-map;
};
adspslpi_mem: adspslpi-region@9ea00000 {
reg = <0 0x9ea00000 0 0x4080000>;
no-map;
};
/* uefi region can be reused by apps */
/* Linux kernel image is loaded at 0xa8000000 */
rmtfs_mem: rmtfs-region@d4a80000 {
compatible = "qcom,rmtfs-mem";
reg = <0x0 0xd4a80000 0x0 0x280000>;
no-map;
qcom,client-id = <1>;
qcom,vmid = <15>;
};
mpss_dsm_mem: mpss-dsm-region@d4d00000 {
reg = <0 0xd4d00000 0 0x3300000>;
no-map;
};
tz_reserved_mem: tz-reserved-region@d8000000 {
reg = <0 0xd8000000 0 0x100000>;
no-map;
};
cpucp_fw_mem: cpucp-fw-region@d8140000 {
reg = <0 0xd8140000 0 0x1c0000>;
no-map;
};
qtee_mem: qtee-region@d8300000 {
reg = <0 0xd8300000 0 0x500000>;
no-map;
};
ta_mem: ta-region@d8800000 {
reg = <0 0xd8800000 0 0x8a00000>;
no-map;
};
tz_tags_mem: tz-tags-region@e1200000 {
reg = <0 0xe1200000 0 0x2740000>;
no-map;
};
hwfence_shbuf: hwfence-shbuf-region@e6440000 {
reg = <0 0xe6440000 0 0x279000>;
no-map;
};
trust_ui_vm_mem: trust-ui-vm-region@f3600000 {
reg = <0 0xf3600000 0 0x4aee000>;
no-map;
};
trust_ui_vm_dump: trust-ui-vm-dump-region@f80ee000 {
reg = <0 0xf80ee000 0 0x1000>;
no-map;
};
trust_ui_vm_qrtr: trust-ui-vm-qrt-region@f80ef000 {
reg = <0 0xf80ef000 0 0x9000>;
no-map;
};
trust_ui_vm_vblk0_ring: trust-ui-vm-vblk0-ring-region@f80f8000 {
reg = <0 0xf80f8000 0 0x4000>;
no-map;
};
trust_ui_vm_vblk1_ring: trust-ui-vm-vblk1-ring-region@f80fc000 {
reg = <0 0xf80fc000 0 0x4000>;
no-map;
};
trust_ui_vm_swiotlb: trust-ui-vm-swiotlb-region@f8100000 {
reg = <0 0xf8100000 0 0x100000>;
no-map;
};
oem_vm_mem: oem-vm-region@f8400000 {
reg = <0 0xf8400000 0 0x4800000>;
no-map;
};
oem_vm_vblk0_ring: oem-vm-vblk0-ring-region@fcc00000 {
reg = <0 0xfcc00000 0 0x4000>;
no-map;
};
oem_vm_swiotlb: oem-vm-swiotlb-region@fcc04000 {
reg = <0 0xfcc04000 0 0x100000>;
no-map;
};
hyp_ext_tags_mem: hyp-ext-tags-region@fce00000 {
reg = <0 0xfce00000 0 0x2900000>;
no-map;
};
hyp_ext_reserved_mem: hyp-ext-reserved-region@ff700000 {
reg = <0 0xff700000 0 0x100000>;
no-map;
};
};
smp2p-adsp {
compatible = "qcom,smp2p";
qcom,smem = <443>, <429>;
interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
IPCC_MPROC_SIGNAL_SMP2P
IRQ_TYPE_EDGE_RISING>;
mboxes = <&ipcc IPCC_CLIENT_LPASS
IPCC_MPROC_SIGNAL_SMP2P>;
qcom,local-pid = <0>;
qcom,remote-pid = <2>;
smp2p_adsp_out: master-kernel {
qcom,entry-name = "master-kernel";
#qcom,smem-state-cells = <1>;
};
smp2p_adsp_in: slave-kernel {
qcom,entry-name = "slave-kernel";
interrupt-controller;
#interrupt-cells = <2>;
};
};
smp2p-cdsp {
compatible = "qcom,smp2p";
qcom,smem = <94>, <432>;
interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
IPCC_MPROC_SIGNAL_SMP2P
IRQ_TYPE_EDGE_RISING>;
mboxes = <&ipcc IPCC_CLIENT_CDSP
IPCC_MPROC_SIGNAL_SMP2P>;
qcom,local-pid = <0>;
qcom,remote-pid = <5>;
smp2p_cdsp_out: master-kernel {
qcom,entry-name = "master-kernel";
#qcom,smem-state-cells = <1>;
};
smp2p_cdsp_in: slave-kernel {
qcom,entry-name = "slave-kernel";
interrupt-controller;
#interrupt-cells = <2>;
};
};
smp2p-modem {
compatible = "qcom,smp2p";
qcom,smem = <435>, <428>;
interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
IPCC_MPROC_SIGNAL_SMP2P
IRQ_TYPE_EDGE_RISING>;
mboxes = <&ipcc IPCC_CLIENT_MPSS
IPCC_MPROC_SIGNAL_SMP2P>;
qcom,local-pid = <0>;
qcom,remote-pid = <1>;
smp2p_modem_out: master-kernel {
qcom,entry-name = "master-kernel";
#qcom,smem-state-cells = <1>;
};
smp2p_modem_in: slave-kernel {
qcom,entry-name = "slave-kernel";
interrupt-controller;
#interrupt-cells = <2>;
};
ipa_smp2p_out: ipa-ap-to-modem {
qcom,entry-name = "ipa";
#qcom,smem-state-cells = <1>;
};
ipa_smp2p_in: ipa-modem-to-ap {
qcom,entry-name = "ipa";
interrupt-controller;
#interrupt-cells = <2>;
};
};
soc: soc@0 {
compatible = "simple-bus";
ranges = <0 0 0 0 0x10 0>;
dma-ranges = <0 0 0 0 0x10 0>;
#address-cells = <2>;
#size-cells = <2>;
gcc: clock-controller@100000 {
compatible = "qcom,sm8550-gcc";
reg = <0 0x00100000 0 0x1f4200>;
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
clocks = <&bi_tcxo_div2>, <&sleep_clk>,
<&pcie0_phy>,
<&pcie1_phy>,
<&pcie_1_phy_aux_clk>,
<&ufs_mem_phy 0>,
<&ufs_mem_phy 1>,
<&ufs_mem_phy 2>,
<&usb_dp_qmpphy QMP_USB43DP_USB3_PIPE_CLK>;
};
ipcc: mailbox@408000 {
compatible = "qcom,sm8550-ipcc", "qcom,ipcc";
reg = <0 0x00408000 0 0x1000>;
interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <3>;
#mbox-cells = <2>;
};
gpi_dma2: dma-controller@800000 {
compatible = "qcom,sm8550-gpi-dma", "qcom,sm6350-gpi-dma";
#dma-cells = <3>;
reg = <0 0x00800000 0 0x60000>;
interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>;
dma-channels = <12>;
dma-channel-mask = <0x3e>;
iommus = <&apps_smmu 0x436 0>;
status = "disabled";
};
qupv3_id_1: geniqup@8c0000 {
compatible = "qcom,geni-se-qup";
reg = <0 0x008c0000 0 0x2000>;
ranges;
clock-names = "m-ahb", "s-ahb";
clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>,
<&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>;
iommus = <&apps_smmu 0x423 0>;
#address-cells = <2>;
#size-cells = <2>;
status = "disabled";
i2c8: i2c@880000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00880000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c8_data_clk>;
interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
<&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>,
<&gpi_dma2 1 0 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
status = "disabled";
};
spi8: spi@880000 {
compatible = "qcom,geni-spi";
reg = <0 0x00880000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>;
interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
<&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>,
<&gpi_dma2 1 0 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c9: i2c@884000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00884000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c9_data_clk>;
interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
<&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>,
<&gpi_dma2 1 1 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
status = "disabled";
};
spi9: spi@884000 {
compatible = "qcom,geni-spi";
reg = <0 0x00884000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>;
interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
<&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>,
<&gpi_dma2 1 1 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c10: i2c@888000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00888000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c10_data_clk>;
interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
<&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>,
<&gpi_dma2 1 2 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
status = "disabled";
};
spi10: spi@888000 {
compatible = "qcom,geni-spi";
reg = <0 0x00888000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>;
interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
<&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>,
<&gpi_dma2 1 2 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c11: i2c@88c000 {
compatible = "qcom,geni-i2c";
reg = <0 0x0088c000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c11_data_clk>;
interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
<&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
<&gpi_dma2 1 3 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
status = "disabled";
};
spi11: spi@88c000 {
compatible = "qcom,geni-spi";
reg = <0 0x0088c000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>;
interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
<&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
<&gpi_dma2 1 3 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c12: i2c@890000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00890000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c12_data_clk>;
interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
<&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
<&gpi_dma2 1 4 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
status = "disabled";
};
spi12: spi@890000 {
compatible = "qcom,geni-spi";
reg = <0 0x00890000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>;
interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
<&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
<&gpi_dma2 1 4 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c13: i2c@894000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00894000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c13_data_clk>;
interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
<&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
<&gpi_dma2 1 5 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
status = "disabled";
};
spi13: spi@894000 {
compatible = "qcom,geni-spi";
reg = <0 0x00894000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>;
interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
<&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>,
<&gpi_dma2 1 5 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c15: i2c@89c000 {
compatible = "qcom,geni-i2c";
reg = <0 0x0089c000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c15_data_clk>;
interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
<&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
dmas = <&gpi_dma2 0 7 QCOM_GPI_I2C>,
<&gpi_dma2 1 7 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
status = "disabled";
};
spi15: spi@89c000 {
compatible = "qcom,geni-spi";
reg = <0 0x0089c000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>;
interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>;
interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
<&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
dmas = <&gpi_dma2 0 7 QCOM_GPI_SPI>,
<&gpi_dma2 1 7 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
};
i2c_master_hub_0: geniqup@9c0000 {
compatible = "qcom,geni-se-i2c-master-hub";
reg = <0x0 0x009c0000 0x0 0x2000>;
clock-names = "s-ahb";
clocks = <&gcc GCC_QUPV3_I2C_S_AHB_CLK>;
#address-cells = <2>;
#size-cells = <2>;
ranges;
status = "disabled";
i2c_hub_0: i2c@980000 {
compatible = "qcom,geni-i2c-master-hub";
reg = <0x0 0x00980000 0x0 0x4000>;
clock-names = "se", "core";
clocks = <&gcc GCC_QUPV3_I2C_S0_CLK>,
<&gcc GCC_QUPV3_I2C_CORE_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&hub_i2c0_data_clk>;
interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
i2c_hub_1: i2c@984000 {
compatible = "qcom,geni-i2c-master-hub";
reg = <0x0 0x00984000 0x0 0x4000>;
clock-names = "se", "core";
clocks = <&gcc GCC_QUPV3_I2C_S1_CLK>,
<&gcc GCC_QUPV3_I2C_CORE_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&hub_i2c1_data_clk>;
interrupts = <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
i2c_hub_2: i2c@988000 {
compatible = "qcom,geni-i2c-master-hub";
reg = <0x0 0x00988000 0x0 0x4000>;
clock-names = "se", "core";
clocks = <&gcc GCC_QUPV3_I2C_S2_CLK>,
<&gcc GCC_QUPV3_I2C_CORE_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&hub_i2c2_data_clk>;
interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
i2c_hub_3: i2c@98c000 {
compatible = "qcom,geni-i2c-master-hub";
reg = <0x0 0x0098c000 0x0 0x4000>;
clock-names = "se", "core";
clocks = <&gcc GCC_QUPV3_I2C_S3_CLK>,
<&gcc GCC_QUPV3_I2C_CORE_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&hub_i2c3_data_clk>;
interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
i2c_hub_4: i2c@990000 {
compatible = "qcom,geni-i2c-master-hub";
reg = <0x0 0x00990000 0x0 0x4000>;
clock-names = "se", "core";
clocks = <&gcc GCC_QUPV3_I2C_S4_CLK>,
<&gcc GCC_QUPV3_I2C_CORE_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&hub_i2c4_data_clk>;
interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
i2c_hub_5: i2c@994000 {
compatible = "qcom,geni-i2c-master-hub";
reg = <0 0x00994000 0 0x4000>;
clock-names = "se", "core";
clocks = <&gcc GCC_QUPV3_I2C_S5_CLK>,
<&gcc GCC_QUPV3_I2C_CORE_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&hub_i2c5_data_clk>;
interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
i2c_hub_6: i2c@998000 {
compatible = "qcom,geni-i2c-master-hub";
reg = <0 0x00998000 0 0x4000>;
clock-names = "se", "core";
clocks = <&gcc GCC_QUPV3_I2C_S6_CLK>,
<&gcc GCC_QUPV3_I2C_CORE_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&hub_i2c6_data_clk>;
interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
i2c_hub_7: i2c@99c000 {
compatible = "qcom,geni-i2c-master-hub";
reg = <0 0x0099c000 0 0x4000>;
clock-names = "se", "core";
clocks = <&gcc GCC_QUPV3_I2C_S7_CLK>,
<&gcc GCC_QUPV3_I2C_CORE_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&hub_i2c7_data_clk>;
interrupts = <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
i2c_hub_8: i2c@9a0000 {
compatible = "qcom,geni-i2c-master-hub";
reg = <0 0x009a0000 0 0x4000>;
clock-names = "se", "core";
clocks = <&gcc GCC_QUPV3_I2C_S8_CLK>,
<&gcc GCC_QUPV3_I2C_CORE_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&hub_i2c8_data_clk>;
interrupts = <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
i2c_hub_9: i2c@9a4000 {
compatible = "qcom,geni-i2c-master-hub";
reg = <0 0x009a4000 0 0x4000>;
clock-names = "se", "core";
clocks = <&gcc GCC_QUPV3_I2C_S9_CLK>,
<&gcc GCC_QUPV3_I2C_CORE_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&hub_i2c9_data_clk>;
interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
};
gpi_dma1: dma-controller@a00000 {
compatible = "qcom,sm8550-gpi-dma", "qcom,sm6350-gpi-dma";
#dma-cells = <3>;
reg = <0 0x00a00000 0 0x60000>;
interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
dma-channels = <12>;
dma-channel-mask = <0x1e>;
iommus = <&apps_smmu 0xb6 0>;
status = "disabled";
};
qupv3_id_0: geniqup@ac0000 {
compatible = "qcom,geni-se-qup";
reg = <0 0x00ac0000 0 0x2000>;
ranges;
clock-names = "m-ahb", "s-ahb";
clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
<&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
iommus = <&apps_smmu 0xa3 0>;
interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>;
interconnect-names = "qup-core";
#address-cells = <2>;
#size-cells = <2>;
status = "disabled";
i2c0: i2c@a80000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00a80000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c0_data_clk>;
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
<&gpi_dma1 1 0 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
status = "disabled";
};
spi0: spi@a80000 {
compatible = "qcom,geni-spi";
reg = <0 0x00a80000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>;
interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
<&gpi_dma1 1 0 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c1: i2c@a84000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00a84000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c1_data_clk>;
interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
<&gpi_dma1 1 1 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
status = "disabled";
};
spi1: spi@a84000 {
compatible = "qcom,geni-spi";
reg = <0 0x00a84000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>;
interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
<&gpi_dma1 1 1 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c2: i2c@a88000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00a88000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c2_data_clk>;
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
<&gpi_dma1 1 2 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
status = "disabled";
};
spi2: spi@a88000 {
compatible = "qcom,geni-spi";
reg = <0 0x00a88000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
<&gpi_dma1 1 2 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c3: i2c@a8c000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00a8c000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c3_data_clk>;
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
<&gpi_dma1 1 3 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
status = "disabled";
};
spi3: spi@a8c000 {
compatible = "qcom,geni-spi";
reg = <0 0x00a8c000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>;
interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
<&gpi_dma1 1 3 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c4: i2c@a90000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00a90000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c4_data_clk>;
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
<&gpi_dma1 1 4 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
status = "disabled";
};
spi4: spi@a90000 {
compatible = "qcom,geni-spi";
reg = <0 0x00a90000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>;
interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
<&gpi_dma1 1 4 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c5: i2c@a94000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00a94000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c5_data_clk>;
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
<&gpi_dma1 1 5 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi5: spi@a94000 {
compatible = "qcom,geni-spi";
reg = <0 0x00a94000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>;
interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
<&gpi_dma1 1 5 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c6: i2c@a98000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00a98000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c6_data_clk>;
interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
<&gpi_dma1 1 6 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi6: spi@a98000 {
compatible = "qcom,geni-spi";
reg = <0 0x00a98000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>,
<&gpi_dma1 1 6 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
uart7: serial@a9c000 {
compatible = "qcom,geni-debug-uart";
reg = <0 0x00a9c000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_uart7_default>;
interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>;
interconnect-names = "qup-core", "qup-config";
interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
status = "disabled";
};
};
cnoc_main: interconnect@1500000 {
compatible = "qcom,sm8550-cnoc-main";
reg = <0 0x01500000 0 0x13080>;
#interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
config_noc: interconnect@1600000 {
compatible = "qcom,sm8550-config-noc";
reg = <0 0x01600000 0 0x6200>;
#interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
system_noc: interconnect@1680000 {
compatible = "qcom,sm8550-system-noc";
reg = <0 0x01680000 0 0x1d080>;
#interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
pcie_noc: interconnect@16c0000 {
compatible = "qcom,sm8550-pcie-anoc";
reg = <0 0x016c0000 0 0x12200>;
#interconnect-cells = <2>;
clocks = <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>,
<&gcc GCC_CFG_NOC_PCIE_ANOC_AHB_CLK>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
aggre1_noc: interconnect@16e0000 {
compatible = "qcom,sm8550-aggre1-noc";
reg = <0 0x016e0000 0 0x14400>;
#interconnect-cells = <2>;
clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
<&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
aggre2_noc: interconnect@1700000 {
compatible = "qcom,sm8550-aggre2-noc";
reg = <0 0x01700000 0 0x1e400>;
#interconnect-cells = <2>;
clocks = <&rpmhcc RPMH_IPA_CLK>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
mmss_noc: interconnect@1780000 {
compatible = "qcom,sm8550-mmss-noc";
reg = <0 0x01780000 0 0x5b800>;
#interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
pcie0: pci@1c00000 {
device_type = "pci";
compatible = "qcom,pcie-sm8550";
reg = <0 0x01c00000 0 0x3000>,
<0 0x60000000 0 0xf1d>,
<0 0x60000f20 0 0xa8>,
<0 0x60001000 0 0x1000>,
<0 0x60100000 0 0x100000>;
reg-names = "parf", "dbi", "elbi", "atu", "config";
#address-cells = <3>;
#size-cells = <2>;
ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
<0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
bus-range = <0x00 0xff>;
dma-coherent;
linux,pci-domain = <0>;
num-lanes = <2>;
interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
<0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
<0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
<0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
<&gcc GCC_PCIE_0_CFG_AHB_CLK>,
<&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
<&gcc GCC_PCIE_0_SLV_AXI_CLK>,
<&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
<&gcc GCC_DDRSS_PCIE_SF_QTB_CLK>,
<&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>;
clock-names = "aux",
"cfg",
"bus_master",
"bus_slave",
"slave_q2a",
"ddrss_sf_tbu",
"noc_aggr";
interconnects = <&pcie_noc MASTER_PCIE_0 0 &mc_virt SLAVE_EBI1 0>,
<&gem_noc MASTER_APPSS_PROC 0 &cnoc_main SLAVE_PCIE_0 0>;
interconnect-names = "pcie-mem", "cpu-pcie";
iommu-map = <0x0 &apps_smmu 0x1400 0x1>,
<0x100 &apps_smmu 0x1401 0x1>;
resets = <&gcc GCC_PCIE_0_BCR>;
reset-names = "pci";
power-domains = <&gcc PCIE_0_GDSC>;
phys = <&pcie0_phy>;
phy-names = "pciephy";
status = "disabled";
};
pcie0_phy: phy@1c06000 {
compatible = "qcom,sm8550-qmp-gen3x2-pcie-phy";
reg = <0 0x01c06000 0 0x2000>;
clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
<&gcc GCC_PCIE_0_CFG_AHB_CLK>,
<&tcsr TCSR_PCIE_0_CLKREF_EN>,
<&gcc GCC_PCIE_0_PHY_RCHNG_CLK>,
<&gcc GCC_PCIE_0_PIPE_CLK>;
clock-names = "aux", "cfg_ahb", "ref", "rchng",
"pipe";
resets = <&gcc GCC_PCIE_0_PHY_BCR>;
reset-names = "phy";
assigned-clocks = <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>;
assigned-clock-rates = <100000000>;
power-domains = <&gcc PCIE_0_PHY_GDSC>;
#clock-cells = <0>;
clock-output-names = "pcie0_pipe_clk";
#phy-cells = <0>;
status = "disabled";
};
pcie1: pci@1c08000 {
device_type = "pci";
compatible = "qcom,pcie-sm8550";
reg = <0x0 0x01c08000 0x0 0x3000>,
<0x0 0x40000000 0x0 0xf1d>,
<0x0 0x40000f20 0x0 0xa8>,
<0x0 0x40001000 0x0 0x1000>,
<0x0 0x40100000 0x0 0x100000>;
reg-names = "parf", "dbi", "elbi", "atu", "config";
#address-cells = <3>;
#size-cells = <2>;
ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
<0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
bus-range = <0x00 0xff>;
dma-coherent;
linux,pci-domain = <1>;
num-lanes = <2>;
interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
<0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
<0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
<0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
<&gcc GCC_PCIE_1_CFG_AHB_CLK>,
<&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
<&gcc GCC_PCIE_1_SLV_AXI_CLK>,
<&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
<&gcc GCC_DDRSS_PCIE_SF_QTB_CLK>,
<&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>,
<&gcc GCC_CNOC_PCIE_SF_AXI_CLK>;
clock-names = "aux",
"cfg",
"bus_master",
"bus_slave",
"slave_q2a",
"ddrss_sf_tbu",
"noc_aggr",
"cnoc_sf_axi";
assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
assigned-clock-rates = <19200000>;
interconnects = <&pcie_noc MASTER_PCIE_1 0 &mc_virt SLAVE_EBI1 0>,
<&gem_noc MASTER_APPSS_PROC 0 &cnoc_main SLAVE_PCIE_1 0>;
interconnect-names = "pcie-mem", "cpu-pcie";
iommu-map = <0x0 &apps_smmu 0x1480 0x1>,
<0x100 &apps_smmu 0x1481 0x1>;
resets = <&gcc GCC_PCIE_1_BCR>,
<&gcc GCC_PCIE_1_LINK_DOWN_BCR>;
reset-names = "pci", "link_down";
power-domains = <&gcc PCIE_1_GDSC>;
phys = <&pcie1_phy>;
phy-names = "pciephy";
status = "disabled";
};
pcie1_phy: phy@1c0e000 {
compatible = "qcom,sm8550-qmp-gen4x2-pcie-phy";
reg = <0x0 0x01c0e000 0x0 0x2000>;
clocks = <&gcc GCC_PCIE_1_PHY_AUX_CLK>,
<&gcc GCC_PCIE_1_CFG_AHB_CLK>,
<&tcsr TCSR_PCIE_1_CLKREF_EN>,
<&gcc GCC_PCIE_1_PHY_RCHNG_CLK>,
<&gcc GCC_PCIE_1_PIPE_CLK>;
clock-names = "aux", "cfg_ahb", "ref", "rchng",
"pipe";
resets = <&gcc GCC_PCIE_1_PHY_BCR>,
<&gcc GCC_PCIE_1_NOCSR_COM_PHY_BCR>;
reset-names = "phy", "phy_nocsr";
assigned-clocks = <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>;
assigned-clock-rates = <100000000>;
power-domains = <&gcc PCIE_1_PHY_GDSC>;
#clock-cells = <0>;
clock-output-names = "pcie1_pipe_clk";
#phy-cells = <0>;
status = "disabled";
};
cryptobam: dma-controller@1dc4000 {
compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
reg = <0x0 0x01dc4000 0x0 0x28000>;
interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <1>;
qcom,ee = <0>;
qcom,controlled-remotely;
iommus = <&apps_smmu 0x480 0x0>,
<&apps_smmu 0x481 0x0>;
};
crypto: crypto@1dfa000 {
compatible = "qcom,sm8550-qce", "qcom,sm8150-qce", "qcom,qce";
reg = <0x0 0x01dfa000 0x0 0x6000>;
dmas = <&cryptobam 4>, <&cryptobam 5>;
dma-names = "rx", "tx";
iommus = <&apps_smmu 0x480 0x0>,
<&apps_smmu 0x481 0x0>;
interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "memory";
};
ufs_mem_phy: phy@1d80000 {
compatible = "qcom,sm8550-qmp-ufs-phy";
reg = <0x0 0x01d80000 0x0 0x2000>;
clocks = <&tcsr TCSR_UFS_CLKREF_EN>,
<&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
clock-names = "ref", "ref_aux";
power-domains = <&gcc UFS_MEM_PHY_GDSC>;
resets = <&ufs_mem_hc 0>;
reset-names = "ufsphy";
#clock-cells = <1>;
#phy-cells = <0>;
status = "disabled";
};
ufs_mem_hc: ufs@1d84000 {
compatible = "qcom,sm8550-ufshc", "qcom,ufshc",
"jedec,ufs-2.0";
reg = <0x0 0x01d84000 0x0 0x3000>;
interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
phys = <&ufs_mem_phy>;
phy-names = "ufsphy";
lanes-per-direction = <2>;
#reset-cells = <1>;
resets = <&gcc GCC_UFS_PHY_BCR>;
reset-names = "rst";
power-domains = <&gcc UFS_PHY_GDSC>;
required-opps = <&rpmhpd_opp_nom>;
iommus = <&apps_smmu 0x60 0x0>;
dma-coherent;
interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mc_virt SLAVE_EBI1 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_UFS_MEM_CFG 0>;
interconnect-names = "ufs-ddr", "cpu-ufs";
clock-names = "core_clk",
"bus_aggr_clk",
"iface_clk",
"core_clk_unipro",
"ref_clk",
"tx_lane0_sync_clk",
"rx_lane0_sync_clk",
"rx_lane1_sync_clk";
clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
<&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
<&gcc GCC_UFS_PHY_AHB_CLK>,
<&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
<&tcsr TCSR_UFS_PAD_CLKREF_EN>,
<&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
freq-table-hz =
<75000000 300000000>,
<0 0>,
<0 0>,
<75000000 300000000>,
<100000000 403000000>,
<0 0>,
<0 0>,
<0 0>;
qcom,ice = <&ice>;
status = "disabled";
};
ice: crypto@1d88000 {
compatible = "qcom,sm8550-inline-crypto-engine",
"qcom,inline-crypto-engine";
reg = <0 0x01d88000 0 0x8000>;
clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
};
tcsr_mutex: hwlock@1f40000 {
compatible = "qcom,tcsr-mutex";
reg = <0 0x01f40000 0 0x20000>;
#hwlock-cells = <1>;
};
tcsr: clock-controller@1fc0000 {
compatible = "qcom,sm8550-tcsr", "syscon";
reg = <0 0x01fc0000 0 0x30000>;
clocks = <&rpmhcc RPMH_CXO_CLK>;
#clock-cells = <1>;
#reset-cells = <1>;
};
gpucc: clock-controller@3d90000 {
compatible = "qcom,sm8550-gpucc";
reg = <0 0x03d90000 0 0xa000>;
clocks = <&bi_tcxo_div2>,
<&gcc GCC_GPU_GPLL0_CLK_SRC>,
<&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
};
remoteproc_mpss: remoteproc@4080000 {
compatible = "qcom,sm8550-mpss-pas";
reg = <0x0 0x04080000 0x0 0x4040>;
interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
<&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
<&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>,
<&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>,
<&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>,
<&smp2p_modem_in 7 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "wdog", "fatal", "ready", "handover",
"stop-ack", "shutdown-ack";
clocks = <&rpmhcc RPMH_CXO_CLK>;
clock-names = "xo";
power-domains = <&rpmhpd RPMHPD_CX>,
<&rpmhpd RPMHPD_MSS>;
power-domain-names = "cx", "mss";
interconnects = <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>;
memory-region = <&mpss_mem>, <&q6_mpss_dtb_mem>, <&mpss_dsm_mem>;
qcom,qmp = <&aoss_qmp>;
qcom,smem-states = <&smp2p_modem_out 0>;
qcom,smem-state-names = "stop";
status = "disabled";
glink-edge {
interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
IPCC_MPROC_SIGNAL_GLINK_QMP
IRQ_TYPE_EDGE_RISING>;
mboxes = <&ipcc IPCC_CLIENT_MPSS
IPCC_MPROC_SIGNAL_GLINK_QMP>;
label = "mpss";
qcom,remote-pid = <1>;
};
};
lpass_wsa2macro: codec@6aa0000 {
compatible = "qcom,sm8550-lpass-wsa-macro";
reg = <0 0x06aa0000 0 0x1000>;
clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
<&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
<&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
<&lpass_vamacro>;
clock-names = "mclk", "macro", "dcodec", "fsgen";
assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
assigned-clock-rates = <19200000>;
#clock-cells = <0>;
clock-output-names = "wsa2-mclk";
pinctrl-names = "default";
pinctrl-0 = <&wsa2_swr_active>;
#sound-dai-cells = <1>;
};
swr3: soundwire-controller@6ab0000 {
compatible = "qcom,soundwire-v2.0.0";
reg = <0 0x06ab0000 0 0x10000>;
interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&lpass_wsa2macro>;
clock-names = "iface";
label = "WSA2";
qcom,din-ports = <4>;
qcom,dout-ports = <9>;
qcom,ports-sinterval = /bits/ 16 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0xff 0xff 0x0f 0x0f 0xff 0x31f>;
qcom,ports-offset1 = /bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0xff 0xff 0x06 0x0d 0xff 0x00>;
qcom,ports-offset2 = /bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>;
qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>;
qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x18>;
qcom,ports-block-pack-mode = /bits/ 8 <0x00 0x01 0x01 0x00 0x01 0x01 0x00 0x00 0x00 0x01 0x01 0x00 0x00>;
qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
qcom,ports-lane-control = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
#address-cells = <2>;
#size-cells = <0>;
#sound-dai-cells = <1>;
status = "disabled";
};
lpass_rxmacro: codec@6ac0000 {
compatible = "qcom,sm8550-lpass-rx-macro";
reg = <0 0x06ac0000 0 0x1000>;
clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
<&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
<&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
<&lpass_vamacro>;
clock-names = "mclk", "macro", "dcodec", "fsgen";
assigned-clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
assigned-clock-rates = <19200000>;
#clock-cells = <0>;
clock-output-names = "mclk";
pinctrl-names = "default";
pinctrl-0 = <&rx_swr_active>;
#sound-dai-cells = <1>;
};
swr1: soundwire-controller@6ad0000 {
compatible = "qcom,soundwire-v2.0.0";
reg = <0 0x06ad0000 0 0x10000>;
interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&lpass_rxmacro>;
clock-names = "iface";
label = "RX";
qcom,din-ports = <0>;
qcom,dout-ports = <10>;
qcom,ports-sinterval = /bits/ 16 <0x03 0x3f 0x1f 0x07 0x00 0x18f 0xff 0xff 0xff 0xff>;
qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0b 0x01 0x00 0x00 0xff 0xff 0xff 0xff>;
qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0b 0x00 0x00 0x00 0xff 0xff 0xff 0xff>;
qcom,ports-hstart = /bits/ 8 <0xff 0x03 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff>;
qcom,ports-hstop = /bits/ 8 <0xff 0x06 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff>;
qcom,ports-word-length = /bits/ 8 <0x01 0x07 0x04 0xff 0xff 0x0f 0xff 0xff 0xff 0xff>;
qcom,ports-block-pack-mode = /bits/ 8 <0xff 0x00 0x01 0xff 0xff 0x00 0xff 0xff 0xff 0xff>;
qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0x00 0x00 0xff 0xff 0xff 0xff>;
qcom,ports-lane-control = /bits/ 8 <0x01 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff>;
#address-cells = <2>;
#size-cells = <0>;
#sound-dai-cells = <1>;
status = "disabled";
};
lpass_txmacro: codec@6ae0000 {
compatible = "qcom,sm8550-lpass-tx-macro";
reg = <0 0x06ae0000 0 0x1000>;
clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
<&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
<&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
<&lpass_vamacro>;
clock-names = "mclk", "macro", "dcodec", "fsgen";
assigned-clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
assigned-clock-rates = <19200000>;
#clock-cells = <0>;
clock-output-names = "mclk";
pinctrl-names = "default";
pinctrl-0 = <&tx_swr_active>;
#sound-dai-cells = <1>;
};
lpass_wsamacro: codec@6b00000 {
compatible = "qcom,sm8550-lpass-wsa-macro";
reg = <0 0x06b00000 0 0x1000>;
clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
<&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
<&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
<&lpass_vamacro>;
clock-names = "mclk", "macro", "dcodec", "fsgen";
assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
assigned-clock-rates = <19200000>;
#clock-cells = <0>;
clock-output-names = "mclk";
pinctrl-names = "default";
pinctrl-0 = <&wsa_swr_active>;
#sound-dai-cells = <1>;
};
swr0: soundwire-controller@6b10000 {
compatible = "qcom,soundwire-v2.0.0";
reg = <0 0x06b10000 0 0x10000>;
interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&lpass_wsamacro>;
clock-names = "iface";
label = "WSA";
qcom,din-ports = <4>;
qcom,dout-ports = <9>;
qcom,ports-sinterval = /bits/ 16 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0xff 0xff 0x0f 0x0f 0xff 0x31f>;
qcom,ports-offset1 = /bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0xff 0xff 0x06 0x0d 0xff 0x00>;
qcom,ports-offset2 = /bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>;
qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>;
qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x18>;
qcom,ports-block-pack-mode = /bits/ 8 <0x00 0x01 0x01 0x00 0x01 0x01 0x00 0x00 0x00 0x01 0x01 0x00 0x00>;
qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
qcom,ports-lane-control = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
#address-cells = <2>;
#size-cells = <0>;
#sound-dai-cells = <1>;
status = "disabled";
};
swr2: soundwire-controller@6d30000 {
compatible = "qcom,soundwire-v2.0.0";
reg = <0 0x06d30000 0 0x10000>;
interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "core", "wakeup";
clocks = <&lpass_vamacro>;
clock-names = "iface";
label = "TX";
qcom,din-ports = <4>;
qcom,dout-ports = <0>;
qcom,ports-sinterval-low = /bits/ 8 <0x01 0x01 0x03 0x03>;
qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x01 0x01>;
qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x00 0x00>;
qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff>;
qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff>;
qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff>;
qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0xff 0xff>;
qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff>;
qcom,ports-lane-control = /bits/ 8 <0x01 0x02 0x00 0x00>;
#address-cells = <2>;
#size-cells = <0>;
#sound-dai-cells = <1>;
status = "disabled";
};
lpass_vamacro: codec@6d44000 {
compatible = "qcom,sm8550-lpass-va-macro";
reg = <0 0x06d44000 0 0x1000>;
clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
<&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
<&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
clock-names = "mclk", "macro", "dcodec";
assigned-clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
assigned-clock-rates = <19200000>;
#clock-cells = <0>;
clock-output-names = "fsgen";
#sound-dai-cells = <1>;
};
lpass_tlmm: pinctrl@6e80000 {
compatible = "qcom,sm8550-lpass-lpi-pinctrl";
reg = <0 0x06e80000 0 0x20000>,
<0 0x07250000 0 0x10000>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&lpass_tlmm 0 0 23>;
clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
<&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
clock-names = "core", "audio";
tx_swr_active: tx-swr-active-state {
clk-pins {
pins = "gpio0";
function = "swr_tx_clk";
drive-strength = <2>;
slew-rate = <1>;
bias-disable;
};
data-pins {
pins = "gpio1", "gpio2", "gpio14";
function = "swr_tx_data";
drive-strength = <2>;
slew-rate = <1>;
bias-bus-hold;
};
};
rx_swr_active: rx-swr-active-state {
clk-pins {
pins = "gpio3";
function = "swr_rx_clk";
drive-strength = <2>;
slew-rate = <1>;
bias-disable;
};
data-pins {
pins = "gpio4", "gpio5";
function = "swr_rx_data";
drive-strength = <2>;
slew-rate = <1>;
bias-bus-hold;
};
};
dmic01_default: dmic01-default-state {
clk-pins {
pins = "gpio6";
function = "dmic1_clk";
drive-strength = <8>;
output-high;
};
data-pins {
pins = "gpio7";
function = "dmic1_data";
drive-strength = <8>;
input-enable;
};
};
dmic02_default: dmic02-default-state {
clk-pins {
pins = "gpio8";
function = "dmic2_clk";
drive-strength = <8>;
output-high;
};
data-pins {
pins = "gpio9";
function = "dmic2_data";
drive-strength = <8>;
input-enable;
};
};
wsa_swr_active: wsa-swr-active-state {
clk-pins {
pins = "gpio10";
function = "wsa_swr_clk";
drive-strength = <2>;
slew-rate = <1>;
bias-disable;
};
data-pins {
pins = "gpio11";
function = "wsa_swr_data";
drive-strength = <2>;
slew-rate = <1>;
bias-bus-hold;
};
};
wsa2_swr_active: wsa2-swr-active-state {
clk-pins {
pins = "gpio15";
function = "wsa2_swr_clk";
drive-strength = <2>;
slew-rate = <1>;
bias-disable;
};
data-pins {
pins = "gpio16";
function = "wsa2_swr_data";
drive-strength = <2>;
slew-rate = <1>;
bias-bus-hold;
};
};
};
lpass_lpiaon_noc: interconnect@7400000 {
compatible = "qcom,sm8550-lpass-lpiaon-noc";
reg = <0 0x07400000 0 0x19080>;
#interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
lpass_lpicx_noc: interconnect@7430000 {
compatible = "qcom,sm8550-lpass-lpicx-noc";
reg = <0 0x07430000 0 0x3a200>;
#interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
lpass_ag_noc: interconnect@7e40000 {
compatible = "qcom,sm8550-lpass-ag-noc";
reg = <0 0x07e40000 0 0xe080>;
#interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
sdhc_2: mmc@8804000 {
compatible = "qcom,sm8550-sdhci", "qcom,sdhci-msm-v5";
reg = <0 0x08804000 0 0x1000>;
interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hc_irq", "pwr_irq";
clocks = <&gcc GCC_SDCC2_AHB_CLK>,
<&gcc GCC_SDCC2_APPS_CLK>,
<&rpmhcc RPMH_CXO_CLK>;
clock-names = "iface", "core", "xo";
iommus = <&apps_smmu 0x540 0>;
qcom,dll-config = <0x0007642c>;
qcom,ddr-config = <0x80040868>;
power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&sdhc2_opp_table>;
interconnects = <&aggre2_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_SDCC_2 0>;
interconnect-names = "sdhc-ddr", "cpu-sdhc";
bus-width = <4>;
dma-coherent;
/* Forbid SDR104/SDR50 - broken hw! */
sdhci-caps-mask = <0x3 0>;
status = "disabled";
sdhc2_opp_table: opp-table {
compatible = "operating-points-v2";
opp-19200000 {
opp-hz = /bits/ 64 <19200000>;
required-opps = <&rpmhpd_opp_min_svs>;
};
opp-50000000 {
opp-hz = /bits/ 64 <50000000>;
required-opps = <&rpmhpd_opp_low_svs>;
};
opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
required-opps = <&rpmhpd_opp_svs>;
};
opp-202000000 {
opp-hz = /bits/ 64 <202000000>;
required-opps = <&rpmhpd_opp_svs_l1>;
};
};
};
videocc: clock-controller@aaf0000 {
compatible = "qcom,sm8550-videocc";
reg = <0 0x0aaf0000 0 0x10000>;
clocks = <&bi_tcxo_div2>,
<&gcc GCC_VIDEO_AHB_CLK>;
power-domains = <&rpmhpd RPMHPD_MMCX>;
required-opps = <&rpmhpd_opp_low_svs>;
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
};
mdss: display-subsystem@ae00000 {
compatible = "qcom,sm8550-mdss";
reg = <0 0x0ae00000 0 0x1000>;
reg-names = "mdss";
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <1>;
clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
<&gcc GCC_DISP_AHB_CLK>,
<&gcc GCC_DISP_HF_AXI_CLK>,
<&dispcc DISP_CC_MDSS_MDP_CLK>;
resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
power-domains = <&dispcc MDSS_GDSC>;
interconnects = <&mmss_noc MASTER_MDP 0 &gem_noc SLAVE_LLCC 0>,
<&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "mdp0-mem", "mdp1-mem";
iommus = <&apps_smmu 0x1c00 0x2>;
#address-cells = <2>;
#size-cells = <2>;
ranges;
status = "disabled";
mdss_mdp: display-controller@ae01000 {
compatible = "qcom,sm8550-dpu";
reg = <0 0x0ae01000 0 0x8f000>,
<0 0x0aeb0000 0 0x2008>;
reg-names = "mdp", "vbif";
interrupt-parent = <&mdss>;
interrupts = <0>;
clocks = <&gcc GCC_DISP_AHB_CLK>,
<&gcc GCC_DISP_HF_AXI_CLK>,
<&dispcc DISP_CC_MDSS_AHB_CLK>,
<&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
<&dispcc DISP_CC_MDSS_MDP_CLK>,
<&dispcc DISP_CC_MDSS_VSYNC_CLK>;
clock-names = "bus",
"nrt_bus",
"iface",
"lut",
"core",
"vsync";
power-domains = <&rpmhpd RPMHPD_MMCX>;
assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
assigned-clock-rates = <19200000>;
operating-points-v2 = <&mdp_opp_table>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
dpu_intf1_out: endpoint {
remote-endpoint = <&mdss_dsi0_in>;
};
};
port@1 {
reg = <1>;
dpu_intf2_out: endpoint {
remote-endpoint = <&mdss_dsi1_in>;
};
};
port@2 {
reg = <2>;
dpu_intf0_out: endpoint {
remote-endpoint = <&mdss_dp0_in>;
};
};
};
mdp_opp_table: opp-table {
compatible = "operating-points-v2";
opp-200000000 {
opp-hz = /bits/ 64 <200000000>;
required-opps = <&rpmhpd_opp_low_svs>;
};
opp-325000000 {
opp-hz = /bits/ 64 <325000000>;
required-opps = <&rpmhpd_opp_svs>;
};
opp-375000000 {
opp-hz = /bits/ 64 <375000000>;
required-opps = <&rpmhpd_opp_svs_l1>;
};
opp-514000000 {
opp-hz = /bits/ 64 <514000000>;
required-opps = <&rpmhpd_opp_nom>;
};
};
};
mdss_dp0: displayport-controller@ae90000 {
compatible = "qcom,sm8550-dp", "qcom,sm8350-dp";
reg = <0 0xae90000 0 0x200>,
<0 0xae90200 0 0x200>,
<0 0xae90400 0 0xc00>,
<0 0xae91000 0 0x400>,
<0 0xae91400 0 0x400>;
interrupt-parent = <&mdss>;
interrupts = <12>;
clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
<&dispcc DISP_CC_MDSS_DPTX0_AUX_CLK>,
<&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK>,
<&dispcc DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
<&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>;
clock-names = "core_iface",
"core_aux",
"ctrl_link",
"ctrl_link_iface",
"stream_pixel";
assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
<&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>;
assigned-clock-parents = <&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>,
<&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
phys = <&usb_dp_qmpphy QMP_USB43DP_DP_PHY>;
phy-names = "dp";
#sound-dai-cells = <0>;
operating-points-v2 = <&dp_opp_table>;
power-domains = <&rpmhpd RPMHPD_MMCX>;
status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
mdss_dp0_in: endpoint {
remote-endpoint = <&dpu_intf0_out>;
};
};
port@1 {
reg = <1>;
mdss_dp0_out: endpoint {
};
};
};
dp_opp_table: opp-table {
compatible = "operating-points-v2";
opp-162000000 {
opp-hz = /bits/ 64 <162000000>;
required-opps = <&rpmhpd_opp_low_svs_d1>;
};
opp-270000000 {
opp-hz = /bits/ 64 <270000000>;
required-opps = <&rpmhpd_opp_low_svs>;
};
opp-540000000 {
opp-hz = /bits/ 64 <540000000>;
required-opps = <&rpmhpd_opp_svs_l1>;
};
opp-810000000 {
opp-hz = /bits/ 64 <810000000>;
required-opps = <&rpmhpd_opp_nom>;
};
};
};
mdss_dsi0: dsi@ae94000 {
compatible = "qcom,sm8550-dsi-ctrl", "qcom,mdss-dsi-ctrl";
reg = <0 0x0ae94000 0 0x400>;
reg-names = "dsi_ctrl";
interrupt-parent = <&mdss>;
interrupts = <4>;
clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
<&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
<&dispcc DISP_CC_MDSS_PCLK0_CLK>,
<&dispcc DISP_CC_MDSS_ESC0_CLK>,
<&dispcc DISP_CC_MDSS_AHB_CLK>,
<&gcc GCC_DISP_HF_AXI_CLK>;
clock-names = "byte",
"byte_intf",
"pixel",
"core",
"iface",
"bus";
power-domains = <&rpmhpd RPMHPD_MMCX>;
assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
<&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
assigned-clock-parents = <&mdss_dsi0_phy 0>,
<&mdss_dsi0_phy 1>;
operating-points-v2 = <&mdss_dsi_opp_table>;
phys = <&mdss_dsi0_phy>;
phy-names = "dsi";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
mdss_dsi0_in: endpoint {
remote-endpoint = <&dpu_intf1_out>;
};
};
port@1 {
reg = <1>;
mdss_dsi0_out: endpoint {
};
};
};
mdss_dsi_opp_table: opp-table {
compatible = "operating-points-v2";
opp-187500000 {
opp-hz = /bits/ 64 <187500000>;
required-opps = <&rpmhpd_opp_low_svs>;
};
opp-300000000 {
opp-hz = /bits/ 64 <300000000>;
required-opps = <&rpmhpd_opp_svs>;
};
opp-358000000 {
opp-hz = /bits/ 64 <358000000>;
required-opps = <&rpmhpd_opp_svs_l1>;
};
};
};
mdss_dsi0_phy: phy@ae95000 {
compatible = "qcom,sm8550-dsi-phy-4nm";
reg = <0 0x0ae95000 0 0x200>,
<0 0x0ae95200 0 0x280>,
<0 0x0ae95500 0 0x400>;
reg-names = "dsi_phy",
"dsi_phy_lane",
"dsi_pll";
clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
<&rpmhcc RPMH_CXO_CLK>;
clock-names = "iface", "ref";
#clock-cells = <1>;
#phy-cells = <0>;
status = "disabled";
};
mdss_dsi1: dsi@ae96000 {
compatible = "qcom,sm8550-dsi-ctrl", "qcom,mdss-dsi-ctrl";
reg = <0 0x0ae96000 0 0x400>;
reg-names = "dsi_ctrl";
interrupt-parent = <&mdss>;
interrupts = <5>;
clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
<&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
<&dispcc DISP_CC_MDSS_PCLK1_CLK>,
<&dispcc DISP_CC_MDSS_ESC1_CLK>,
<&dispcc DISP_CC_MDSS_AHB_CLK>,
<&gcc GCC_DISP_HF_AXI_CLK>;
clock-names = "byte",
"byte_intf",
"pixel",
"core",
"iface",
"bus";
power-domains = <&rpmhpd RPMHPD_MMCX>;
assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
<&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
assigned-clock-parents = <&mdss_dsi1_phy 0>,
<&mdss_dsi1_phy 1>;
operating-points-v2 = <&mdss_dsi_opp_table>;
phys = <&mdss_dsi1_phy>;
phy-names = "dsi";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
mdss_dsi1_in: endpoint {
remote-endpoint = <&dpu_intf2_out>;
};
};
port@1 {
reg = <1>;
mdss_dsi1_out: endpoint {
};
};
};
};
mdss_dsi1_phy: phy@ae97000 {
compatible = "qcom,sm8550-dsi-phy-4nm";
reg = <0 0x0ae97000 0 0x200>,
<0 0x0ae97200 0 0x280>,
<0 0x0ae97500 0 0x400>;
reg-names = "dsi_phy",
"dsi_phy_lane",
"dsi_pll";
clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
<&rpmhcc RPMH_CXO_CLK>;
clock-names = "iface", "ref";
#clock-cells = <1>;
#phy-cells = <0>;
status = "disabled";
};
};
dispcc: clock-controller@af00000 {
compatible = "qcom,sm8550-dispcc";
reg = <0 0x0af00000 0 0x20000>;
clocks = <&bi_tcxo_div2>,
<&bi_tcxo_ao_div2>,
<&gcc GCC_DISP_AHB_CLK>,
<&sleep_clk>,
<&mdss_dsi0_phy 0>,
<&mdss_dsi0_phy 1>,
<&mdss_dsi1_phy 0>,
<&mdss_dsi1_phy 1>,
<&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>,
<&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
<0>, /* dp1 */
<0>,
<0>, /* dp2 */
<0>,
<0>, /* dp3 */
<0>;
power-domains = <&rpmhpd RPMHPD_MMCX>;
required-opps = <&rpmhpd_opp_low_svs>;
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
};
usb_1_hsphy: phy@88e3000 {
compatible = "qcom,sm8550-snps-eusb2-phy";
reg = <0x0 0x088e3000 0x0 0x154>;
#phy-cells = <0>;
clocks = <&tcsr TCSR_USB2_CLKREF_EN>;
clock-names = "ref";
resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
status = "disabled";
};
usb_dp_qmpphy: phy@88e8000 {
compatible = "qcom,sm8550-qmp-usb3-dp-phy";
reg = <0x0 0x088e8000 0x0 0x3000>;
clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
<&rpmhcc RPMH_CXO_CLK>,
<&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
<&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
clock-names = "aux", "ref", "com_aux", "usb3_pipe";
power-domains = <&gcc USB3_PHY_GDSC>;
resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
<&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
reset-names = "phy", "common";
#clock-cells = <1>;
#phy-cells = <1>;
status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
usb_dp_qmpphy_out: endpoint {
};
};
port@1 {
reg = <1>;
usb_dp_qmpphy_usb_ss_in: endpoint {
};
};
port@2 {
reg = <2>;
usb_dp_qmpphy_dp_in: endpoint {
};
};
};
};
usb_1: usb@a6f8800 {
compatible = "qcom,sm8550-dwc3", "qcom,dwc3";
reg = <0x0 0x0a6f8800 0x0 0x400>;
#address-cells = <2>;
#size-cells = <2>;
ranges;
clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
<&gcc GCC_USB30_PRIM_MASTER_CLK>,
<&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
<&gcc GCC_USB30_PRIM_SLEEP_CLK>,
<&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
<&tcsr TCSR_USB3_CLKREF_EN>;
clock-names = "cfg_noc",
"core",
"iface",
"sleep",
"mock_utmi",
"xo";
assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
<&gcc GCC_USB30_PRIM_MASTER_CLK>;
assigned-clock-rates = <19200000>, <200000000>;
interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
<&pdc 17 IRQ_TYPE_LEVEL_HIGH>,
<&pdc 15 IRQ_TYPE_EDGE_RISING>,
<&pdc 14 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "hs_phy_irq",
"ss_phy_irq",
"dm_hs_phy_irq",
"dp_hs_phy_irq";
power-domains = <&gcc USB30_PRIM_GDSC>;
required-opps = <&rpmhpd_opp_nom>;
resets = <&gcc GCC_USB30_PRIM_BCR>;
interconnects = <&aggre1_noc MASTER_USB3_0 0 &mc_virt SLAVE_EBI1 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>;
interconnect-names = "usb-ddr", "apps-usb";
status = "disabled";
usb_1_dwc3: usb@a600000 {
compatible = "snps,dwc3";
reg = <0x0 0x0a600000 0x0 0xcd00>;
interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
iommus = <&apps_smmu 0x40 0x0>;
snps,dis_u2_susphy_quirk;
snps,dis_enblslpm_quirk;
snps,usb3_lpm_capable;
phys = <&usb_1_hsphy>,
<&usb_dp_qmpphy QMP_USB43DP_USB3_PHY>;
phy-names = "usb2-phy", "usb3-phy";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
usb_1_dwc3_hs: endpoint {
};
};
port@1 {
reg = <1>;
usb_1_dwc3_ss: endpoint {
};
};
};
};
};
pdc: interrupt-controller@b220000 {
compatible = "qcom,sm8550-pdc", "qcom,pdc";
reg = <0 0x0b220000 0 0x30000>, <0 0x174000f0 0 0x64>;
qcom,pdc-ranges = <0 480 94>, <94 609 31>,
<125 63 1>, <126 716 12>,
<138 251 5>;
#interrupt-cells = <2>;
interrupt-parent = <&intc>;
interrupt-controller;
};
tsens0: thermal-sensor@c271000 {
compatible = "qcom,sm8550-tsens", "qcom,tsens-v2";
reg = <0 0x0c271000 0 0x1000>, /* TM */
<0 0x0c222000 0 0x1000>; /* SROT */
#qcom,sensors = <16>;
interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "uplow", "critical";
#thermal-sensor-cells = <1>;
};
tsens1: thermal-sensor@c272000 {
compatible = "qcom,sm8550-tsens", "qcom,tsens-v2";
reg = <0 0x0c272000 0 0x1000>, /* TM */
<0 0x0c223000 0 0x1000>; /* SROT */
#qcom,sensors = <16>;
interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "uplow", "critical";
#thermal-sensor-cells = <1>;
};
tsens2: thermal-sensor@c273000 {
compatible = "qcom,sm8550-tsens", "qcom,tsens-v2";
reg = <0 0x0c273000 0 0x1000>, /* TM */
<0 0x0c224000 0 0x1000>; /* SROT */
#qcom,sensors = <16>;
interrupts = <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "uplow", "critical";
#thermal-sensor-cells = <1>;
};
aoss_qmp: power-management@c300000 {
compatible = "qcom,sm8550-aoss-qmp", "qcom,aoss-qmp";
reg = <0 0x0c300000 0 0x400>;
interrupt-parent = <&ipcc>;
interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP
IRQ_TYPE_EDGE_RISING>;
mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
#clock-cells = <0>;
};
sram@c3f0000 {
compatible = "qcom,rpmh-stats";
reg = <0 0x0c3f0000 0 0x400>;
};
spmi_bus: spmi@c400000 {
compatible = "qcom,spmi-pmic-arb";
reg = <0 0x0c400000 0 0x3000>,
<0 0x0c500000 0 0x4000000>,
<0 0x0c440000 0 0x80000>,
<0 0x0c4c0000 0 0x20000>,
<0 0x0c42d000 0 0x4000>;
reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
interrupt-names = "periph_irq";
interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
qcom,ee = <0>;
qcom,channel = <0>;
qcom,bus-id = <0>;
#address-cells = <2>;
#size-cells = <0>;
interrupt-controller;
#interrupt-cells = <4>;
};
tlmm: pinctrl@f100000 {
compatible = "qcom,sm8550-tlmm";
reg = <0 0x0f100000 0 0x300000>;
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-ranges = <&tlmm 0 0 211>;
wakeup-parent = <&pdc>;
hub_i2c0_data_clk: hub-i2c0-data-clk-state {
/* SDA, SCL */
pins = "gpio16", "gpio17";
function = "i2chub0_se0";
drive-strength = <2>;
bias-pull-up;
};
hub_i2c1_data_clk: hub-i2c1-data-clk-state {
/* SDA, SCL */
pins = "gpio18", "gpio19";
function = "i2chub0_se1";
drive-strength = <2>;
bias-pull-up;
};
hub_i2c2_data_clk: hub-i2c2-data-clk-state {
/* SDA, SCL */
pins = "gpio20", "gpio21";
function = "i2chub0_se2";
drive-strength = <2>;
bias-pull-up;
};
hub_i2c3_data_clk: hub-i2c3-data-clk-state {
/* SDA, SCL */
pins = "gpio22", "gpio23";
function = "i2chub0_se3";
drive-strength = <2>;
bias-pull-up;
};
hub_i2c4_data_clk: hub-i2c4-data-clk-state {
/* SDA, SCL */
pins = "gpio4", "gpio5";
function = "i2chub0_se4";
drive-strength = <2>;
bias-pull-up;
};
hub_i2c5_data_clk: hub-i2c5-data-clk-state {
/* SDA, SCL */
pins = "gpio6", "gpio7";
function = "i2chub0_se5";
drive-strength = <2>;
bias-pull-up;
};
hub_i2c6_data_clk: hub-i2c6-data-clk-state {
/* SDA, SCL */
pins = "gpio8", "gpio9";
function = "i2chub0_se6";
drive-strength = <2>;
bias-pull-up;
};
hub_i2c7_data_clk: hub-i2c7-data-clk-state {
/* SDA, SCL */
pins = "gpio10", "gpio11";
function = "i2chub0_se7";
drive-strength = <2>;
bias-pull-up;
};
hub_i2c8_data_clk: hub-i2c8-data-clk-state {
/* SDA, SCL */
pins = "gpio206", "gpio207";
function = "i2chub0_se8";
drive-strength = <2>;
bias-pull-up;
};
hub_i2c9_data_clk: hub-i2c9-data-clk-state {
/* SDA, SCL */
pins = "gpio84", "gpio85";
function = "i2chub0_se9";
drive-strength = <2>;
bias-pull-up;
};
pcie0_default_state: pcie0-default-state {
perst-pins {
pins = "gpio94";
function = "gpio";
drive-strength = <2>;
bias-pull-down;
};
clkreq-pins {
pins = "gpio95";
function = "pcie0_clk_req_n";
drive-strength = <2>;
bias-pull-up;
};
wake-pins {
pins = "gpio96";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
pcie1_default_state: pcie1-default-state {
perst-pins {
pins = "gpio97";
function = "gpio";
drive-strength = <2>;
bias-pull-down;
};
clkreq-pins {
pins = "gpio98";
function = "pcie1_clk_req_n";
drive-strength = <2>;
bias-pull-up;
};
wake-pins {
pins = "gpio99";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
qup_i2c0_data_clk: qup-i2c0-data-clk-state {
/* SDA, SCL */
pins = "gpio28", "gpio29";
function = "qup1_se0";
drive-strength = <2>;
bias-pull-up = <2200>;
};
qup_i2c1_data_clk: qup-i2c1-data-clk-state {
/* SDA, SCL */
pins = "gpio32", "gpio33";
function = "qup1_se1";
drive-strength = <2>;
bias-pull-up = <2200>;
};
qup_i2c2_data_clk: qup-i2c2-data-clk-state {
/* SDA, SCL */
pins = "gpio36", "gpio37";
function = "qup1_se2";
drive-strength = <2>;
bias-pull-up = <2200>;
};
qup_i2c3_data_clk: qup-i2c3-data-clk-state {
/* SDA, SCL */
pins = "gpio40", "gpio41";
function = "qup1_se3";
drive-strength = <2>;
bias-pull-up = <2200>;
};
qup_i2c4_data_clk: qup-i2c4-data-clk-state {
/* SDA, SCL */
pins = "gpio44", "gpio45";
function = "qup1_se4";
drive-strength = <2>;
bias-pull-up = <2200>;
};
qup_i2c5_data_clk: qup-i2c5-data-clk-state {
/* SDA, SCL */
pins = "gpio52", "gpio53";
function = "qup1_se5";
drive-strength = <2>;
bias-pull-up = <2200>;
};
qup_i2c6_data_clk: qup-i2c6-data-clk-state {
/* SDA, SCL */
pins = "gpio48", "gpio49";
function = "qup1_se6";
drive-strength = <2>;
bias-pull-up = <2200>;
};
qup_i2c8_data_clk: qup-i2c8-data-clk-state {
scl-pins {
pins = "gpio57";
function = "qup2_se0_l1_mira";
drive-strength = <2>;
bias-pull-up = <2200>;
};
sda-pins {
pins = "gpio56";
function = "qup2_se0_l0_mira";
drive-strength = <2>;
bias-pull-up = <2200>;
};
};
qup_i2c9_data_clk: qup-i2c9-data-clk-state {
/* SDA, SCL */
pins = "gpio60", "gpio61";
function = "qup2_se1";
drive-strength = <2>;
bias-pull-up = <2200>;
};
qup_i2c10_data_clk: qup-i2c10-data-clk-state {
/* SDA, SCL */
pins = "gpio64", "gpio65";
function = "qup2_se2";
drive-strength = <2>;
bias-pull-up = <2200>;
};
qup_i2c11_data_clk: qup-i2c11-data-clk-state {
/* SDA, SCL */
pins = "gpio68", "gpio69";
function = "qup2_se3";
drive-strength = <2>;
bias-pull-up = <2200>;
};
qup_i2c12_data_clk: qup-i2c12-data-clk-state {
/* SDA, SCL */
pins = "gpio2", "gpio3";
function = "qup2_se4";
drive-strength = <2>;
bias-pull-up = <2200>;
};
qup_i2c13_data_clk: qup-i2c13-data-clk-state {
/* SDA, SCL */
pins = "gpio80", "gpio81";
function = "qup2_se5";
drive-strength = <2>;
bias-pull-up = <2200>;
};
qup_i2c15_data_clk: qup-i2c15-data-clk-state {
/* SDA, SCL */
pins = "gpio72", "gpio106";
function = "qup2_se7";
drive-strength = <2>;
bias-pull-up = <2200>;
};
qup_spi0_cs: qup-spi0-cs-state {
pins = "gpio31";
function = "qup1_se0";
drive-strength = <6>;
bias-disable;
};
qup_spi0_data_clk: qup-spi0-data-clk-state {
/* MISO, MOSI, CLK */
pins = "gpio28", "gpio29", "gpio30";
function = "qup1_se0";
drive-strength = <6>;
bias-disable;
};
qup_spi1_cs: qup-spi1-cs-state {
pins = "gpio35";
function = "qup1_se1";
drive-strength = <6>;
bias-disable;
};
qup_spi1_data_clk: qup-spi1-data-clk-state {
/* MISO, MOSI, CLK */
pins = "gpio32", "gpio33", "gpio34";
function = "qup1_se1";
drive-strength = <6>;
bias-disable;
};
qup_spi2_cs: qup-spi2-cs-state {
pins = "gpio39";
function = "qup1_se2";
drive-strength = <6>;
bias-disable;
};
qup_spi2_data_clk: qup-spi2-data-clk-state {
/* MISO, MOSI, CLK */
pins = "gpio36", "gpio37", "gpio38";
function = "qup1_se2";
drive-strength = <6>;
bias-disable;
};
qup_spi3_cs: qup-spi3-cs-state {
pins = "gpio43";
function = "qup1_se3";
drive-strength = <6>;
bias-disable;
};
qup_spi3_data_clk: qup-spi3-data-clk-state {
/* MISO, MOSI, CLK */
pins = "gpio40", "gpio41", "gpio42";
function = "qup1_se3";
drive-strength = <6>;
bias-disable;
};
qup_spi4_cs: qup-spi4-cs-state {
pins = "gpio47";
function = "qup1_se4";
drive-strength = <6>;
bias-disable;
};
qup_spi4_data_clk: qup-spi4-data-clk-state {
/* MISO, MOSI, CLK */
pins = "gpio44", "gpio45", "gpio46";
function = "qup1_se4";
drive-strength = <6>;
bias-disable;
};
qup_spi5_cs: qup-spi5-cs-state {
pins = "gpio55";
function = "qup1_se5";
drive-strength = <6>;
bias-disable;
};
qup_spi5_data_clk: qup-spi5-data-clk-state {
/* MISO, MOSI, CLK */
pins = "gpio52", "gpio53", "gpio54";
function = "qup1_se5";
drive-strength = <6>;
bias-disable;
};
qup_spi6_cs: qup-spi6-cs-state {
pins = "gpio51";
function = "qup1_se6";
drive-strength = <6>;
bias-disable;
};
qup_spi6_data_clk: qup-spi6-data-clk-state {
/* MISO, MOSI, CLK */
pins = "gpio48", "gpio49", "gpio50";
function = "qup1_se6";
drive-strength = <6>;
bias-disable;
};
qup_spi8_cs: qup-spi8-cs-state {
pins = "gpio59";
function = "qup2_se0_l3_mira";
drive-strength = <6>;
bias-disable;
};
qup_spi8_data_clk: qup-spi8-data-clk-state {
/* MISO, MOSI, CLK */
pins = "gpio56", "gpio57", "gpio58";
function = "qup2_se0_l2_mira";
drive-strength = <6>;
bias-disable;
};
qup_spi9_cs: qup-spi9-cs-state {
pins = "gpio63";
function = "qup2_se1";
drive-strength = <6>;
bias-disable;
};
qup_spi9_data_clk: qup-spi9-data-clk-state {
/* MISO, MOSI, CLK */
pins = "gpio60", "gpio61", "gpio62";
function = "qup2_se1";
drive-strength = <6>;
bias-disable;
};
qup_spi10_cs: qup-spi10-cs-state {
pins = "gpio67";
function = "qup2_se2";
drive-strength = <6>;
bias-disable;
};
qup_spi10_data_clk: qup-spi10-data-clk-state {
/* MISO, MOSI, CLK */
pins = "gpio64", "gpio65", "gpio66";
function = "qup2_se2";
drive-strength = <6>;
bias-disable;
};
qup_spi11_cs: qup-spi11-cs-state {
pins = "gpio71";
function = "qup2_se3";
drive-strength = <6>;
bias-disable;
};
qup_spi11_data_clk: qup-spi11-data-clk-state {
/* MISO, MOSI, CLK */
pins = "gpio68", "gpio69", "gpio70";
function = "qup2_se3";
drive-strength = <6>;
bias-disable;
};
qup_spi12_cs: qup-spi12-cs-state {
pins = "gpio119";
function = "qup2_se4";
drive-strength = <6>;
bias-disable;
};
qup_spi12_data_clk: qup-spi12-data-clk-state {
/* MISO, MOSI, CLK */
pins = "gpio2", "gpio3", "gpio118";
function = "qup2_se4";
drive-strength = <6>;
bias-disable;
};
qup_spi13_cs: qup-spi13-cs-state {
pins = "gpio83";
function = "qup2_se5";
drive-strength = <6>;
bias-disable;
};
qup_spi13_data_clk: qup-spi13-data-clk-state {
/* MISO, MOSI, CLK */
pins = "gpio80", "gpio81", "gpio82";
function = "qup2_se5";
drive-strength = <6>;
bias-disable;
};
qup_spi15_cs: qup-spi15-cs-state {
pins = "gpio75";
function = "qup2_se7";
drive-strength = <6>;
bias-disable;
};
qup_spi15_data_clk: qup-spi15-data-clk-state {
/* MISO, MOSI, CLK */
pins = "gpio72", "gpio106", "gpio74";
function = "qup2_se7";
drive-strength = <6>;
bias-disable;
};
qup_uart7_default: qup-uart7-default-state {
/* TX, RX */
pins = "gpio26", "gpio27";
function = "qup1_se7";
drive-strength = <2>;
bias-disable;
};
sdc2_sleep: sdc2-sleep-state {
clk-pins {
pins = "sdc2_clk";
bias-disable;
drive-strength = <2>;
};
cmd-pins {
pins = "sdc2_cmd";
bias-pull-up;
drive-strength = <2>;
};
data-pins {
pins = "sdc2_data";
bias-pull-up;
drive-strength = <2>;
};
};
sdc2_default: sdc2-default-state {
clk-pins {
pins = "sdc2_clk";
bias-disable;
drive-strength = <16>;
};
cmd-pins {
pins = "sdc2_cmd";
bias-pull-up;
drive-strength = <10>;
};
data-pins {
pins = "sdc2_data";
bias-pull-up;
drive-strength = <10>;
};
};
};
apps_smmu: iommu@15000000 {
compatible = "qcom,sm8550-smmu-500", "qcom,smmu-500", "arm,mmu-500";
reg = <0 0x15000000 0 0x100000>;
#iommu-cells = <2>;
#global-interrupts = <1>;
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>;
};
intc: interrupt-controller@17100000 {
compatible = "arm,gic-v3";
reg = <0 0x17100000 0 0x10000>, /* GICD */
<0 0x17180000 0 0x200000>; /* GICR * 8 */
ranges;
#interrupt-cells = <3>;
interrupt-controller;
#redistributor-regions = <1>;
redistributor-stride = <0 0x40000>;
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
#address-cells = <2>;
#size-cells = <2>;
gic_its: msi-controller@17140000 {
compatible = "arm,gic-v3-its";
reg = <0 0x17140000 0 0x20000>;
msi-controller;
#msi-cells = <1>;
};
};
timer@17420000 {
compatible = "arm,armv7-timer-mem";
reg = <0 0x17420000 0 0x1000>;
ranges = <0 0 0 0x20000000>;
#address-cells = <1>;
#size-cells = <1>;
frame@17421000 {
reg = <0x17421000 0x1000>,
<0x17422000 0x1000>;
frame-number = <0>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
};
frame@17423000 {
reg = <0x17423000 0x1000>;
frame-number = <1>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
frame@17425000 {
reg = <0x17425000 0x1000>;
frame-number = <2>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
frame@17427000 {
reg = <0x17427000 0x1000>;
frame-number = <3>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
frame@17429000 {
reg = <0x17429000 0x1000>;
frame-number = <4>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
frame@1742b000 {
reg = <0x1742b000 0x1000>;
frame-number = <5>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
frame@1742d000 {
reg = <0x1742d000 0x1000>;
frame-number = <6>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
};
apps_rsc: rsc@17a00000 {
label = "apps_rsc";
compatible = "qcom,rpmh-rsc";
reg = <0 0x17a00000 0 0x10000>,
<0 0x17a10000 0 0x10000>,
<0 0x17a20000 0 0x10000>,
<0 0x17a30000 0 0x10000>;
reg-names = "drv-0", "drv-1", "drv-2", "drv-3";
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
qcom,tcs-offset = <0xd00>;
qcom,drv-id = <2>;
qcom,tcs-config = <ACTIVE_TCS 3>, <SLEEP_TCS 2>,
<WAKE_TCS 2>, <CONTROL_TCS 0>;
power-domains = <&CLUSTER_PD>;
apps_bcm_voter: bcm-voter {
compatible = "qcom,bcm-voter";
};
rpmhcc: clock-controller {
compatible = "qcom,sm8550-rpmh-clk";
#clock-cells = <1>;
clock-names = "xo";
clocks = <&xo_board>;
};
rpmhpd: power-controller {
compatible = "qcom,sm8550-rpmhpd";
#power-domain-cells = <1>;
operating-points-v2 = <&rpmhpd_opp_table>;
rpmhpd_opp_table: opp-table {
compatible = "operating-points-v2";
rpmhpd_opp_ret: opp-16 {
opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
};
rpmhpd_opp_min_svs: opp-48 {
opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
};
rpmhpd_opp_low_svs_d2: opp-52 {
opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D2>;
};
rpmhpd_opp_low_svs_d1: opp-56 {
opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
};
rpmhpd_opp_low_svs_d0: opp-60 {
opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D0>;
};
rpmhpd_opp_low_svs: opp-64 {
opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
};
rpmhpd_opp_low_svs_l1: opp-80 {
opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>;
};
rpmhpd_opp_svs: opp-128 {
opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
};
rpmhpd_opp_svs_l0: opp-144 {
opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>;
};
rpmhpd_opp_svs_l1: opp-192 {
opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
};
rpmhpd_opp_nom: opp-256 {
opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
};
rpmhpd_opp_nom_l1: opp-320 {
opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
};
rpmhpd_opp_nom_l2: opp-336 {
opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
};
rpmhpd_opp_turbo: opp-384 {
opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
};
rpmhpd_opp_turbo_l1: opp-416 {
opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
};
};
};
};
cpufreq_hw: cpufreq@17d91000 {
compatible = "qcom,sm8550-cpufreq-epss", "qcom,cpufreq-epss";
reg = <0 0x17d91000 0 0x1000>,
<0 0x17d92000 0 0x1000>,
<0 0x17d93000 0 0x1000>;
reg-names = "freq-domain0", "freq-domain1", "freq-domain2";
clocks = <&bi_tcxo_div2>, <&gcc GCC_GPLL0>;
clock-names = "xo", "alternate";
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1", "dcvsh-irq-2";
#freq-domain-cells = <1>;
#clock-cells = <1>;
};
pmu@24091000 {
compatible = "qcom,sm8550-llcc-bwmon", "qcom,sc7280-llcc-bwmon";
reg = <0 0x24091000 0 0x1000>;
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
interconnects = <&mc_virt MASTER_LLCC 3 &mc_virt SLAVE_EBI1 3>;
operating-points-v2 = <&llcc_bwmon_opp_table>;
llcc_bwmon_opp_table: opp-table {
compatible = "operating-points-v2";
opp-0 {
opp-peak-kBps = <2086000>;
};
opp-1 {
opp-peak-kBps = <2929000>;
};
opp-2 {
opp-peak-kBps = <5931000>;
};
opp-3 {
opp-peak-kBps = <6515000>;
};
opp-4 {
opp-peak-kBps = <7980000>;
};
opp-5 {
opp-peak-kBps = <10437000>;
};
opp-6 {
opp-peak-kBps = <12157000>;
};
opp-7 {
opp-peak-kBps = <14060000>;
};
opp-8 {
opp-peak-kBps = <16113000>;
};
};
};
pmu@240b6400 {
compatible = "qcom,sm8550-cpu-bwmon", "qcom,sdm845-bwmon";
reg = <0 0x240b6400 0 0x600>;
interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
interconnects = <&gem_noc MASTER_APPSS_PROC 3 &gem_noc SLAVE_LLCC 3>;
operating-points-v2 = <&cpu_bwmon_opp_table>;
cpu_bwmon_opp_table: opp-table {
compatible = "operating-points-v2";
opp-0 {
opp-peak-kBps = <4577000>;
};
opp-1 {
opp-peak-kBps = <7110000>;
};
opp-2 {
opp-peak-kBps = <9155000>;
};
opp-3 {
opp-peak-kBps = <12298000>;
};
opp-4 {
opp-peak-kBps = <14236000>;
};
opp-5 {
opp-peak-kBps = <16265000>;
};
};
};
gem_noc: interconnect@24100000 {
compatible = "qcom,sm8550-gem-noc";
reg = <0 0x24100000 0 0xbb800>;
#interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
system-cache-controller@25000000 {
compatible = "qcom,sm8550-llcc";
reg = <0 0x25000000 0 0x200000>,
<0 0x25200000 0 0x200000>,
<0 0x25400000 0 0x200000>,
<0 0x25600000 0 0x200000>,
<0 0x25800000 0 0x200000>;
reg-names = "llcc0_base",
"llcc1_base",
"llcc2_base",
"llcc3_base",
"llcc_broadcast_base";
interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
};
remoteproc_adsp: remoteproc@30000000 {
compatible = "qcom,sm8550-adsp-pas";
reg = <0x0 0x30000000 0x0 0x100>;
interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
<&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
<&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
<&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
<&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "wdog", "fatal", "ready",
"handover", "stop-ack";
clocks = <&rpmhcc RPMH_CXO_CLK>;
clock-names = "xo";
power-domains = <&rpmhpd RPMHPD_LCX>,
<&rpmhpd RPMHPD_LMX>;
power-domain-names = "lcx", "lmx";
interconnects = <&lpass_lpicx_noc MASTER_LPASS_PROC 0 &mc_virt SLAVE_EBI1 0>;
memory-region = <&adspslpi_mem>, <&q6_adsp_dtb_mem>;
qcom,qmp = <&aoss_qmp>;
qcom,smem-states = <&smp2p_adsp_out 0>;
qcom,smem-state-names = "stop";
status = "disabled";
remoteproc_adsp_glink: glink-edge {
interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
IPCC_MPROC_SIGNAL_GLINK_QMP
IRQ_TYPE_EDGE_RISING>;
mboxes = <&ipcc IPCC_CLIENT_LPASS
IPCC_MPROC_SIGNAL_GLINK_QMP>;
label = "lpass";
qcom,remote-pid = <2>;
fastrpc {
compatible = "qcom,fastrpc";
qcom,glink-channels = "fastrpcglink-apps-dsp";
label = "adsp";
#address-cells = <1>;
#size-cells = <0>;
compute-cb@3 {
compatible = "qcom,fastrpc-compute-cb";
reg = <3>;
iommus = <&apps_smmu 0x1003 0x80>,
<&apps_smmu 0x1063 0x0>;
};
compute-cb@4 {
compatible = "qcom,fastrpc-compute-cb";
reg = <4>;
iommus = <&apps_smmu 0x1004 0x80>,
<&apps_smmu 0x1064 0x0>;
};
compute-cb@5 {
compatible = "qcom,fastrpc-compute-cb";
reg = <5>;
iommus = <&apps_smmu 0x1005 0x80>,
<&apps_smmu 0x1065 0x0>;
};
compute-cb@6 {
compatible = "qcom,fastrpc-compute-cb";
reg = <6>;
iommus = <&apps_smmu 0x1006 0x80>,
<&apps_smmu 0x1066 0x0>;
};
compute-cb@7 {
compatible = "qcom,fastrpc-compute-cb";
reg = <7>;
iommus = <&apps_smmu 0x1007 0x80>,
<&apps_smmu 0x1067 0x0>;
};
};
gpr {
compatible = "qcom,gpr";
qcom,glink-channels = "adsp_apps";
qcom,domain = <GPR_DOMAIN_ID_ADSP>;
qcom,intents = <512 20>;
#address-cells = <1>;
#size-cells = <0>;
q6apm: service@1 {
compatible = "qcom,q6apm";
reg = <GPR_APM_MODULE_IID>;
#sound-dai-cells = <0>;
qcom,protection-domain = "avs/audio",
"msm/adsp/audio_pd";
q6apmdai: dais {
compatible = "qcom,q6apm-dais";
iommus = <&apps_smmu 0x1001 0x80>,
<&apps_smmu 0x1061 0x0>;
};
q6apmbedai: bedais {
compatible = "qcom,q6apm-lpass-dais";
#sound-dai-cells = <1>;
};
};
q6prm: service@2 {
compatible = "qcom,q6prm";
reg = <GPR_PRM_MODULE_IID>;
qcom,protection-domain = "avs/audio",
"msm/adsp/audio_pd";
q6prmcc: clock-controller {
compatible = "qcom,q6prm-lpass-clocks";
#clock-cells = <2>;
};
};
};
};
};
nsp_noc: interconnect@320c0000 {
compatible = "qcom,sm8550-nsp-noc";
reg = <0 0x320c0000 0 0xe080>;
#interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
remoteproc_cdsp: remoteproc@32300000 {
compatible = "qcom,sm8550-cdsp-pas";
reg = <0x0 0x32300000 0x0 0x1400000>;
interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
<&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
<&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
<&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
<&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "wdog", "fatal", "ready",
"handover", "stop-ack";
clocks = <&rpmhcc RPMH_CXO_CLK>;
clock-names = "xo";
power-domains = <&rpmhpd RPMHPD_CX>,
<&rpmhpd RPMHPD_MXC>,
<&rpmhpd RPMHPD_NSP>;
power-domain-names = "cx", "mxc", "nsp";
interconnects = <&nsp_noc MASTER_CDSP_PROC 0 &mc_virt SLAVE_EBI1 0>;
memory-region = <&cdsp_mem>, <&q6_cdsp_dtb_mem>;
qcom,qmp = <&aoss_qmp>;
qcom,smem-states = <&smp2p_cdsp_out 0>;
qcom,smem-state-names = "stop";
status = "disabled";
glink-edge {
interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
IPCC_MPROC_SIGNAL_GLINK_QMP
IRQ_TYPE_EDGE_RISING>;
mboxes = <&ipcc IPCC_CLIENT_CDSP
IPCC_MPROC_SIGNAL_GLINK_QMP>;
label = "cdsp";
qcom,remote-pid = <5>;
fastrpc {
compatible = "qcom,fastrpc";
qcom,glink-channels = "fastrpcglink-apps-dsp";
label = "cdsp";
#address-cells = <1>;
#size-cells = <0>;
compute-cb@1 {
compatible = "qcom,fastrpc-compute-cb";
reg = <1>;
iommus = <&apps_smmu 0x1961 0x0>,
<&apps_smmu 0x0c01 0x20>,
<&apps_smmu 0x19c1 0x10>;
};
compute-cb@2 {
compatible = "qcom,fastrpc-compute-cb";
reg = <2>;
iommus = <&apps_smmu 0x1962 0x0>,
<&apps_smmu 0x0c02 0x20>,
<&apps_smmu 0x19c2 0x10>;
};
compute-cb@3 {
compatible = "qcom,fastrpc-compute-cb";
reg = <3>;
iommus = <&apps_smmu 0x1963 0x0>,
<&apps_smmu 0x0c03 0x20>,
<&apps_smmu 0x19c3 0x10>;
};
compute-cb@4 {
compatible = "qcom,fastrpc-compute-cb";
reg = <4>;
iommus = <&apps_smmu 0x1964 0x0>,
<&apps_smmu 0x0c04 0x20>,
<&apps_smmu 0x19c4 0x10>;
};
compute-cb@5 {
compatible = "qcom,fastrpc-compute-cb";
reg = <5>;
iommus = <&apps_smmu 0x1965 0x0>,
<&apps_smmu 0x0c05 0x20>,
<&apps_smmu 0x19c5 0x10>;
};
compute-cb@6 {
compatible = "qcom,fastrpc-compute-cb";
reg = <6>;
iommus = <&apps_smmu 0x1966 0x0>,
<&apps_smmu 0x0c06 0x20>,
<&apps_smmu 0x19c6 0x10>;
};
compute-cb@7 {
compatible = "qcom,fastrpc-compute-cb";
reg = <7>;
iommus = <&apps_smmu 0x1967 0x0>,
<&apps_smmu 0x0c07 0x20>,
<&apps_smmu 0x19c7 0x10>;
};
compute-cb@8 {
compatible = "qcom,fastrpc-compute-cb";
reg = <8>;
iommus = <&apps_smmu 0x1968 0x0>,
<&apps_smmu 0x0c08 0x20>,
<&apps_smmu 0x19c8 0x10>;
};
/* note: secure cb9 in downstream */
};
};
};
};
thermal-zones {
aoss0-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&tsens0 0>;
trips {
thermal-engine-config {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
reset-mon-config {
temperature = <115000>;
hysteresis = <5000>;
type = "passive";
};
};
};
cpuss0-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&tsens0 1>;
trips {
thermal-engine-config {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
reset-mon-config {
temperature = <115000>;
hysteresis = <5000>;
type = "passive";
};
};
};
cpuss1-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&tsens0 2>;
trips {
thermal-engine-config {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
reset-mon-config {
temperature = <115000>;
hysteresis = <5000>;
type = "passive";
};
};
};
cpuss2-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&tsens0 3>;
trips {
thermal-engine-config {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
reset-mon-config {
temperature = <115000>;
hysteresis = <5000>;
type = "passive";
};
};
};
cpuss3-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&tsens0 4>;
trips {
thermal-engine-config {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
reset-mon-config {
temperature = <115000>;
hysteresis = <5000>;
type = "passive";
};
};
};
cpu3-top-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&tsens0 5>;
trips {
cpu3_top_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "passive";
};
cpu3_top_alert1: trip-point1 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};
cpu3_top_crit: cpu-critical {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
};
cpu3-bottom-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&tsens0 6>;
trips {
cpu3_bottom_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "passive";
};
cpu3_bottom_alert1: trip-point1 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};
cpu3_bottom_crit: cpu-critical {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
};
cpu4-top-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&tsens0 7>;
trips {
cpu4_top_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "passive";
};
cpu4_top_alert1: trip-point1 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};
cpu4_top_crit: cpu-critical {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
};
cpu4-bottom-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&tsens0 8>;
trips {
cpu4_bottom_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "passive";
};
cpu4_bottom_alert1: trip-point1 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};
cpu4_bottom_crit: cpu-critical {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
};
cpu5-top-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&tsens0 9>;
trips {
cpu5_top_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "passive";
};
cpu5_top_alert1: trip-point1 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};
cpu5_top_crit: cpu-critical {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
};
cpu5-bottom-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&tsens0 10>;
trips {
cpu5_bottom_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "passive";
};
cpu5_bottom_alert1: trip-point1 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};
cpu5_bottom_crit: cpu-critical {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
};
cpu6-top-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&tsens0 11>;
trips {
cpu6_top_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "passive";
};
cpu6_top_alert1: trip-point1 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};
cpu6_top_crit: cpu-critical {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
};
cpu6-bottom-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&tsens0 12>;
trips {
cpu6_bottom_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "passive";
};
cpu6_bottom_alert1: trip-point1 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};
cpu6_bottom_crit: cpu-critical {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
};
cpu7-top-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&tsens0 13>;
trips {
cpu7_top_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "passive";
};
cpu7_top_alert1: trip-point1 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};
cpu7_top_crit: cpu-critical {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
};
cpu7-middle-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&tsens0 14>;
trips {
cpu7_middle_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "passive";
};
cpu7_middle_alert1: trip-point1 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};
cpu7_middle_crit: cpu-critical {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
};
cpu7-bottom-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&tsens0 15>;
trips {
cpu7_bottom_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "passive";
};
cpu7_bottom_alert1: trip-point1 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};
cpu7_bottom_crit: cpu-critical {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
};
aoss1-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&tsens1 0>;
trips {
thermal-engine-config {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
reset-mon-config {
temperature = <115000>;
hysteresis = <5000>;
type = "passive";
};
};
};
cpu0-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&tsens1 1>;
trips {
cpu0_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "passive";
};
cpu0_alert1: trip-point1 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};
cpu0_crit: cpu-critical {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
};
cpu1-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&tsens1 2>;
trips {
cpu1_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "passive";
};
cpu1_alert1: trip-point1 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};
cpu1_crit: cpu-critical {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
};
cpu2-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&tsens1 3>;
trips {
cpu2_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "passive";
};
cpu2_alert1: trip-point1 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};
cpu2_crit: cpu-critical {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
};
cdsp0-thermal {
polling-delay-passive = <10>;
polling-delay = <0>;
thermal-sensors = <&tsens2 4>;
trips {
thermal-engine-config {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
thermal-hal-config {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
reset-mon-config {
temperature = <115000>;
hysteresis = <5000>;
type = "passive";
};
cdsp0_junction_config: junction-config {
temperature = <95000>;
hysteresis = <5000>;
type = "passive";
};
};
};
cdsp1-thermal {
polling-delay-passive = <10>;
polling-delay = <0>;
thermal-sensors = <&tsens2 5>;
trips {
thermal-engine-config {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
thermal-hal-config {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
reset-mon-config {
temperature = <115000>;
hysteresis = <5000>;
type = "passive";
};
cdsp1_junction_config: junction-config {
temperature = <95000>;
hysteresis = <5000>;
type = "passive";
};
};
};
cdsp2-thermal {
polling-delay-passive = <10>;
polling-delay = <0>;
thermal-sensors = <&tsens2 6>;
trips {
thermal-engine-config {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
thermal-hal-config {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
reset-mon-config {
temperature = <115000>;
hysteresis = <5000>;
type = "passive";
};
cdsp2_junction_config: junction-config {
temperature = <95000>;
hysteresis = <5000>;
type = "passive";
};
};
};
cdsp3-thermal {
polling-delay-passive = <10>;
polling-delay = <0>;
thermal-sensors = <&tsens2 7>;
trips {
thermal-engine-config {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
thermal-hal-config {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
reset-mon-config {
temperature = <115000>;
hysteresis = <5000>;
type = "passive";
};
cdsp3_junction_config: junction-config {
temperature = <95000>;
hysteresis = <5000>;
type = "passive";
};
};
};
video-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&tsens1 8>;
trips {
thermal-engine-config {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
reset-mon-config {
temperature = <115000>;
hysteresis = <5000>;
type = "passive";
};
};
};
mem-thermal {
polling-delay-passive = <10>;
polling-delay = <0>;
thermal-sensors = <&tsens1 9>;
trips {
thermal-engine-config {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
ddr_config0: ddr0-config {
temperature = <90000>;
hysteresis = <5000>;
type = "passive";
};
reset-mon-config {
temperature = <115000>;
hysteresis = <5000>;
type = "passive";
};
};
};
modem0-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&tsens1 10>;
trips {
thermal-engine-config {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
mdmss0_config0: mdmss0-config0 {
temperature = <102000>;
hysteresis = <3000>;
type = "passive";
};
mdmss0_config1: mdmss0-config1 {
temperature = <105000>;
hysteresis = <3000>;
type = "passive";
};
reset-mon-config {
temperature = <115000>;
hysteresis = <5000>;
type = "passive";
};
};
};
modem1-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&tsens1 11>;
trips {
thermal-engine-config {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
mdmss1_config0: mdmss1-config0 {
temperature = <102000>;
hysteresis = <3000>;
type = "passive";
};
mdmss1_config1: mdmss1-config1 {
temperature = <105000>;
hysteresis = <3000>;
type = "passive";
};
reset-mon-config {
temperature = <115000>;
hysteresis = <5000>;
type = "passive";
};
};
};
modem2-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&tsens1 12>;
trips {
thermal-engine-config {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
mdmss2_config0: mdmss2-config0 {
temperature = <102000>;
hysteresis = <3000>;
type = "passive";
};
mdmss2_config1: mdmss2-config1 {
temperature = <105000>;
hysteresis = <3000>;
type = "passive";
};
reset-mon-config {
temperature = <115000>;
hysteresis = <5000>;
type = "passive";
};
};
};
modem3-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&tsens1 13>;
trips {
thermal-engine-config {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
mdmss3_config0: mdmss3-config0 {
temperature = <102000>;
hysteresis = <3000>;
type = "passive";
};
mdmss3_config1: mdmss3-config1 {
temperature = <105000>;
hysteresis = <3000>;
type = "passive";
};
reset-mon-config {
temperature = <115000>;
hysteresis = <5000>;
type = "passive";
};
};
};
camera0-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&tsens1 14>;
trips {
thermal-engine-config {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
reset-mon-config {
temperature = <115000>;
hysteresis = <5000>;
type = "passive";
};
};
};
camera1-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&tsens1 15>;
trips {
thermal-engine-config {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
reset-mon-config {
temperature = <115000>;
hysteresis = <5000>;
type = "passive";
};
};
};
aoss2-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&tsens2 0>;
trips {
thermal-engine-config {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
reset-mon-config {
temperature = <115000>;
hysteresis = <5000>;
type = "passive";
};
};
};
gpuss-0-thermal {
polling-delay-passive = <10>;
polling-delay = <0>;
thermal-sensors = <&tsens2 1>;
trips {
thermal-engine-config {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
thermal-hal-config {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
reset-mon-config {
temperature = <115000>;
hysteresis = <5000>;
type = "passive";
};
gpu0_junction_config: junction-config {
temperature = <95000>;
hysteresis = <5000>;
type = "passive";
};
};
};
gpuss-1-thermal {
polling-delay-passive = <10>;
polling-delay = <0>;
thermal-sensors = <&tsens2 2>;
trips {
thermal-engine-config {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
thermal-hal-config {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
reset-mon-config {
temperature = <115000>;
hysteresis = <5000>;
type = "passive";
};
gpu1_junction_config: junction-config {
temperature = <95000>;
hysteresis = <5000>;
type = "passive";
};
};
};
gpuss-2-thermal {
polling-delay-passive = <10>;
polling-delay = <0>;
thermal-sensors = <&tsens2 3>;
trips {
thermal-engine-config {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
thermal-hal-config {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
reset-mon-config {
temperature = <115000>;
hysteresis = <5000>;
type = "passive";
};
gpu2_junction_config: junction-config {
temperature = <95000>;
hysteresis = <5000>;
type = "passive";
};
};
};
gpuss-3-thermal {
polling-delay-passive = <10>;
polling-delay = <0>;
thermal-sensors = <&tsens2 4>;
trips {
thermal-engine-config {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
thermal-hal-config {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
reset-mon-config {
temperature = <115000>;
hysteresis = <5000>;
type = "passive";
};
gpu3_junction_config: junction-config {
temperature = <95000>;
hysteresis = <5000>;
type = "passive";
};
};
};
gpuss-4-thermal {
polling-delay-passive = <10>;
polling-delay = <0>;
thermal-sensors = <&tsens2 5>;
trips {
thermal-engine-config {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
thermal-hal-config {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
reset-mon-config {
temperature = <115000>;
hysteresis = <5000>;
type = "passive";
};
gpu4_junction_config: junction-config {
temperature = <95000>;
hysteresis = <5000>;
type = "passive";
};
};
};
gpuss-5-thermal {
polling-delay-passive = <10>;
polling-delay = <0>;
thermal-sensors = <&tsens2 6>;
trips {
thermal-engine-config {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
thermal-hal-config {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
reset-mon-config {
temperature = <115000>;
hysteresis = <5000>;
type = "passive";
};
gpu5_junction_config: junction-config {
temperature = <95000>;
hysteresis = <5000>;
type = "passive";
};
};
};
gpuss-6-thermal {
polling-delay-passive = <10>;
polling-delay = <0>;
thermal-sensors = <&tsens2 7>;
trips {
thermal-engine-config {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
thermal-hal-config {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
reset-mon-config {
temperature = <115000>;
hysteresis = <5000>;
type = "passive";
};
gpu6_junction_config: junction-config {
temperature = <95000>;
hysteresis = <5000>;
type = "passive";
};
};
};
gpuss-7-thermal {
polling-delay-passive = <10>;
polling-delay = <0>;
thermal-sensors = <&tsens2 8>;
trips {
thermal-engine-config {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
thermal-hal-config {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
reset-mon-config {
temperature = <115000>;
hysteresis = <5000>;
type = "passive";
};
gpu7_junction_config: junction-config {
temperature = <95000>;
hysteresis = <5000>;
type = "passive";
};
};
};
};
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
};
};