| /* SPDX-License-Identifier: GPL-2.0 */ |
| /* |
| * kselftest.h: low-level kselftest framework to include from |
| * selftest programs. When possible, please use |
| * kselftest_harness.h instead. |
| * |
| * Copyright (c) 2014 Shuah Khan <shuahkh@osg.samsung.com> |
| * Copyright (c) 2014 Samsung Electronics Co., Ltd. |
| * |
| * Using this API consists of first counting how many tests your code |
| * has to run, and then starting up the reporting: |
| * |
| * ksft_print_header(); |
| * ksft_set_plan(total_number_of_tests); |
| * |
| * For each test, report any progress, debugging, etc with: |
| * |
| * ksft_print_msg(fmt, ...); |
| * |
| * and finally report the pass/fail/skip/xfail state of the test with one of: |
| * |
| * ksft_test_result(condition, fmt, ...); |
| * ksft_test_result_pass(fmt, ...); |
| * ksft_test_result_fail(fmt, ...); |
| * ksft_test_result_skip(fmt, ...); |
| * ksft_test_result_xfail(fmt, ...); |
| * ksft_test_result_error(fmt, ...); |
| * |
| * When all tests are finished, clean up and exit the program with one of: |
| * |
| * ksft_finished(); |
| * ksft_exit(condition); |
| * ksft_exit_pass(); |
| * ksft_exit_fail(); |
| * |
| * If the program wants to report details on why the entire program has |
| * failed, it can instead exit with a message (this is usually done when |
| * the program is aborting before finishing all tests): |
| * |
| * ksft_exit_fail_msg(fmt, ...); |
| * |
| */ |
| #ifndef __KSELFTEST_H |
| #define __KSELFTEST_H |
| |
| #ifndef NOLIBC |
| #include <errno.h> |
| #include <stdlib.h> |
| #include <unistd.h> |
| #include <stdarg.h> |
| #include <stdio.h> |
| #endif |
| |
| #ifndef ARRAY_SIZE |
| #define ARRAY_SIZE(arr) (sizeof(arr) / sizeof((arr)[0])) |
| #endif |
| |
| /* |
| * gcc cpuid.h provides __cpuid_count() since v4.4. |
| * Clang/LLVM cpuid.h provides __cpuid_count() since v3.4.0. |
| * |
| * Provide local define for tests needing __cpuid_count() because |
| * selftests need to work in older environments that do not yet |
| * have __cpuid_count(). |
| */ |
| #ifndef __cpuid_count |
| #define __cpuid_count(level, count, a, b, c, d) \ |
| __asm__ __volatile__ ("cpuid\n\t" \ |
| : "=a" (a), "=b" (b), "=c" (c), "=d" (d) \ |
| : "0" (level), "2" (count)) |
| #endif |
| |
| /* define kselftest exit codes */ |
| #define KSFT_PASS 0 |
| #define KSFT_FAIL 1 |
| #define KSFT_XFAIL 2 |
| #define KSFT_XPASS 3 |
| #define KSFT_SKIP 4 |
| |
| /* counters */ |
| struct ksft_count { |
| unsigned int ksft_pass; |
| unsigned int ksft_fail; |
| unsigned int ksft_xfail; |
| unsigned int ksft_xpass; |
| unsigned int ksft_xskip; |
| unsigned int ksft_error; |
| }; |
| |
| static struct ksft_count ksft_cnt; |
| static unsigned int ksft_plan; |
| |
| static inline unsigned int ksft_test_num(void) |
| { |
| return ksft_cnt.ksft_pass + ksft_cnt.ksft_fail + |
| ksft_cnt.ksft_xfail + ksft_cnt.ksft_xpass + |
| ksft_cnt.ksft_xskip + ksft_cnt.ksft_error; |
| } |
| |
| static inline void ksft_inc_pass_cnt(void) { ksft_cnt.ksft_pass++; } |
| static inline void ksft_inc_fail_cnt(void) { ksft_cnt.ksft_fail++; } |
| static inline void ksft_inc_xfail_cnt(void) { ksft_cnt.ksft_xfail++; } |
| static inline void ksft_inc_xpass_cnt(void) { ksft_cnt.ksft_xpass++; } |
| static inline void ksft_inc_xskip_cnt(void) { ksft_cnt.ksft_xskip++; } |
| static inline void ksft_inc_error_cnt(void) { ksft_cnt.ksft_error++; } |
| |
| static inline int ksft_get_pass_cnt(void) { return ksft_cnt.ksft_pass; } |
| static inline int ksft_get_fail_cnt(void) { return ksft_cnt.ksft_fail; } |
| static inline int ksft_get_xfail_cnt(void) { return ksft_cnt.ksft_xfail; } |
| static inline int ksft_get_xpass_cnt(void) { return ksft_cnt.ksft_xpass; } |
| static inline int ksft_get_xskip_cnt(void) { return ksft_cnt.ksft_xskip; } |
| static inline int ksft_get_error_cnt(void) { return ksft_cnt.ksft_error; } |
| |
| static inline void ksft_print_header(void) |
| { |
| /* |
| * Force line buffering; If stdout is not connected to a terminal, it |
| * will otherwise default to fully buffered, which can cause output |
| * duplication if there is content in the buffer when fork()ing. If |
| * there is a crash, line buffering also means the most recent output |
| * line will be visible. |
| */ |
| setvbuf(stdout, NULL, _IOLBF, 0); |
| |
| if (!(getenv("KSFT_TAP_LEVEL"))) |
| printf("TAP version 13\n"); |
| } |
| |
| static inline void ksft_set_plan(unsigned int plan) |
| { |
| ksft_plan = plan; |
| printf("1..%d\n", ksft_plan); |
| } |
| |
| static inline void ksft_print_cnts(void) |
| { |
| if (ksft_plan != ksft_test_num()) |
| printf("# Planned tests != run tests (%u != %u)\n", |
| ksft_plan, ksft_test_num()); |
| printf("# Totals: pass:%d fail:%d xfail:%d xpass:%d skip:%d error:%d\n", |
| ksft_cnt.ksft_pass, ksft_cnt.ksft_fail, |
| ksft_cnt.ksft_xfail, ksft_cnt.ksft_xpass, |
| ksft_cnt.ksft_xskip, ksft_cnt.ksft_error); |
| } |
| |
| static inline void ksft_print_msg(const char *msg, ...) |
| { |
| int saved_errno = errno; |
| va_list args; |
| |
| va_start(args, msg); |
| printf("# "); |
| errno = saved_errno; |
| vprintf(msg, args); |
| va_end(args); |
| } |
| |
| static inline void ksft_test_result_pass(const char *msg, ...) |
| { |
| int saved_errno = errno; |
| va_list args; |
| |
| ksft_cnt.ksft_pass++; |
| |
| va_start(args, msg); |
| printf("ok %d ", ksft_test_num()); |
| errno = saved_errno; |
| vprintf(msg, args); |
| va_end(args); |
| } |
| |
| static inline void ksft_test_result_fail(const char *msg, ...) |
| { |
| int saved_errno = errno; |
| va_list args; |
| |
| ksft_cnt.ksft_fail++; |
| |
| va_start(args, msg); |
| printf("not ok %d ", ksft_test_num()); |
| errno = saved_errno; |
| vprintf(msg, args); |
| va_end(args); |
| } |
| |
| /** |
| * ksft_test_result() - Report test success based on truth of condition |
| * |
| * @condition: if true, report test success, otherwise failure. |
| */ |
| #define ksft_test_result(condition, fmt, ...) do { \ |
| if (!!(condition)) \ |
| ksft_test_result_pass(fmt, ##__VA_ARGS__);\ |
| else \ |
| ksft_test_result_fail(fmt, ##__VA_ARGS__);\ |
| } while (0) |
| |
| static inline void ksft_test_result_xfail(const char *msg, ...) |
| { |
| int saved_errno = errno; |
| va_list args; |
| |
| ksft_cnt.ksft_xfail++; |
| |
| va_start(args, msg); |
| printf("ok %d # XFAIL ", ksft_test_num()); |
| errno = saved_errno; |
| vprintf(msg, args); |
| va_end(args); |
| } |
| |
| static inline void ksft_test_result_skip(const char *msg, ...) |
| { |
| int saved_errno = errno; |
| va_list args; |
| |
| ksft_cnt.ksft_xskip++; |
| |
| va_start(args, msg); |
| printf("ok %d # SKIP ", ksft_test_num()); |
| errno = saved_errno; |
| vprintf(msg, args); |
| va_end(args); |
| } |
| |
| /* TODO: how does "error" differ from "fail" or "skip"? */ |
| static inline void ksft_test_result_error(const char *msg, ...) |
| { |
| int saved_errno = errno; |
| va_list args; |
| |
| ksft_cnt.ksft_error++; |
| |
| va_start(args, msg); |
| printf("not ok %d # error ", ksft_test_num()); |
| errno = saved_errno; |
| vprintf(msg, args); |
| va_end(args); |
| } |
| |
| static inline int ksft_exit_pass(void) |
| { |
| ksft_print_cnts(); |
| exit(KSFT_PASS); |
| } |
| |
| static inline int ksft_exit_fail(void) |
| { |
| ksft_print_cnts(); |
| exit(KSFT_FAIL); |
| } |
| |
| /** |
| * ksft_exit() - Exit selftest based on truth of condition |
| * |
| * @condition: if true, exit self test with success, otherwise fail. |
| */ |
| #define ksft_exit(condition) do { \ |
| if (!!(condition)) \ |
| ksft_exit_pass(); \ |
| else \ |
| ksft_exit_fail(); \ |
| } while (0) |
| |
| /** |
| * ksft_finished() - Exit selftest with success if all tests passed |
| */ |
| #define ksft_finished() \ |
| ksft_exit(ksft_plan == \ |
| ksft_cnt.ksft_pass + \ |
| ksft_cnt.ksft_xfail + \ |
| ksft_cnt.ksft_xskip) |
| |
| static inline int ksft_exit_fail_msg(const char *msg, ...) |
| { |
| int saved_errno = errno; |
| va_list args; |
| |
| va_start(args, msg); |
| printf("Bail out! "); |
| errno = saved_errno; |
| vprintf(msg, args); |
| va_end(args); |
| |
| ksft_print_cnts(); |
| exit(KSFT_FAIL); |
| } |
| |
| static inline int ksft_exit_xfail(void) |
| { |
| ksft_print_cnts(); |
| exit(KSFT_XFAIL); |
| } |
| |
| static inline int ksft_exit_xpass(void) |
| { |
| ksft_print_cnts(); |
| exit(KSFT_XPASS); |
| } |
| |
| static inline int ksft_exit_skip(const char *msg, ...) |
| { |
| int saved_errno = errno; |
| va_list args; |
| |
| va_start(args, msg); |
| |
| /* |
| * FIXME: several tests misuse ksft_exit_skip so produce |
| * something sensible if some tests have already been run |
| * or a plan has been printed. Those tests should use |
| * ksft_test_result_skip or ksft_exit_fail_msg instead. |
| */ |
| if (ksft_plan || ksft_test_num()) { |
| ksft_cnt.ksft_xskip++; |
| printf("ok %d # SKIP ", 1 + ksft_test_num()); |
| } else { |
| printf("1..0 # SKIP "); |
| } |
| if (msg) { |
| errno = saved_errno; |
| vprintf(msg, args); |
| va_end(args); |
| } |
| if (ksft_test_num()) |
| ksft_print_cnts(); |
| exit(KSFT_SKIP); |
| } |
| |
| #endif /* __KSELFTEST_H */ |