blob: cdcaa3f52d25367074161e4f80049f66402dc972 [file] [log] [blame]
Ilitek ILI210x/ILI2117/ILI2120/ILI251x touchscreen controller
Required properties:
- compatible:
ilitek,ili210x for ILI210x
ilitek,ili2117 for ILI2117
ilitek,ili2120 for ILI2120
ilitek,ili251x for ILI251x
- reg: The I2C address of the device
- interrupts: The sink for the touchscreen's IRQ output
See ../interrupt-controller/interrupts.txt
Optional properties for main touchpad device:
- reset-gpios: GPIO specifier for the touchscreen's reset pin (active low)
Example:
touchscreen@41 {
compatible = "ilitek,ili251x";
reg = <0x41>;
interrupt-parent = <&gpio4>;
interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
reset-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>;
};