blob: 830069b1c37c4163f878f87a3780f135af4a2d7c [file] [log] [blame]
Binding for the Synopsys HSDK reset controller
This binding uses the common reset binding[1].
[1] Documentation/devicetree/bindings/reset/reset.txt
Required properties:
- compatible: should be "snps,hsdk-reset".
- reg: should always contain 2 pairs address - length: first for reset
configuration register and second for corresponding SW reset and status bits
- #reset-cells: from common reset binding; Should always be set to 1.
reset: reset@880 {
compatible = "snps,hsdk-reset";
#reset-cells = <1>;
reg = <0x8A0 0x4>, <0xFF0 0x4>;
Specifying reset lines connected to IP modules:
ethernet@.... {
resets = <&reset HSDK_V1_ETH_RESET>;
The index could be found in <dt-bindings/reset/snps,hsdk-reset.h>