| Freescale FlexTimer Module (FTM) Alarm |
| |
| Required properties: |
| - compatible : Should be "fsl,<chip>-ftm-alarm", the |
| supported chips include |
| "fsl,ls1012a-ftm-alarm" |
| "fsl,ls1021a-ftm-alarm" |
| "fsl,ls1028a-ftm-alarm" |
| "fsl,ls1043a-ftm-alarm" |
| "fsl,ls1046a-ftm-alarm" |
| "fsl,ls1088a-ftm-alarm" |
| "fsl,ls208xa-ftm-alarm" |
| "fsl,lx2160a-ftm-alarm" |
| - reg : Specifies base physical address and size of the register sets for the |
| FlexTimer Module. |
| - interrupts : Should be the FlexTimer Module interrupt. |
| - fsl,rcpm-wakeup property and rcpm node : Please refer |
| Documentation/devicetree/bindings/soc/fsl/rcpm.txt |
| |
| Optional properties: |
| - big-endian: If the host controller is big-endian mode, specify this property. |
| The default endian mode is little-endian. |
| |
| Example: |
| rcpm: rcpm@1e34040 { |
| compatible = "fsl,ls1088a-rcpm", "fsl,qoriq-rcpm-2.1+"; |
| reg = <0x0 0x1e34040 0x0 0x18>; |
| #fsl,rcpm-wakeup-cells = <6>; |
| }; |
| |
| ftm_alarm0: timer@2800000 { |
| compatible = "fsl,ls1088a-ftm-alarm"; |
| reg = <0x0 0x2800000 0x0 0x10000>; |
| fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0>; |
| interrupts = <0 44 4>; |
| }; |
