| Socionext Milbeaut UART controller |
| |
| Required properties: |
| - compatible: should be "socionext,milbeaut-usio-uart". |
| - reg: offset and length of the register set for the device. |
| - interrupts: two interrupts specifier. |
| - interrupt-names: should be "rx", "tx". |
| - clocks: phandle to the input clock. |
| |
| Optional properties: |
| - auto-flow-control: flow control enable. |
| |
| Example: |
| usio1: usio_uart@1e700010 { |
| compatible = "socionext,milbeaut-usio-uart"; |
| reg = <0x1e700010 0x10>; |
| interrupts = <0 141 0x4>, <0 149 0x4>; |
| interrupt-names = "rx", "tx"; |
| clocks = <&clk 2>; |
| auto-flow-control; |
| }; |
