# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/sound/nvidia,tegra210-adx.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Tegra210 ADX Device Tree Bindings

description: |
  The Audio Demultiplexer (ADX) block takes an input stream with up to
  16 channels and demultiplexes it into four output streams of up to 16
  channels each. A byte RAM helps to form output frames by any combination
  of bytes from the input frame. Its design is identical to that of byte
  RAM in the AMX except that the data flow direction is reversed.

maintainers:
  - Jon Hunter <jonathanh@nvidia.com>
  - Mohan Kumar <mkumard@nvidia.com>
  - Sameer Pujar <spujar@nvidia.com>

allOf:
  - $ref: name-prefix.yaml#

properties:
  $nodename:
    pattern: "^adx@[0-9a-f]*$"

  compatible:
    oneOf:
      - const: nvidia,tegra210-adx
      - items:
          - enum:
              - nvidia,tegra194-adx
              - nvidia,tegra186-adx
          - const: nvidia,tegra210-adx

  reg:
    maxItems: 1

  sound-name-prefix:
    pattern: "^ADX[1-9]$"

  ports:
    $ref: /schemas/graph.yaml#/properties/ports
    description: |
      ADX has one input and four outputs. Accordingly ACIF (Audio Client
      Interface) port nodes are defined to represent ADX input (port 0)
      and outputs (ports 1 to 4). These are connected to corresponding
      ports on AHUB (Audio Hub).
    properties:
      port@0:
        $ref: audio-graph-port.yaml#
        unevaluatedProperties: false
        description: ADX ACIF input port
    patternProperties:
      '^port@[1-4]':
        $ref: audio-graph-port.yaml#
        unevaluatedProperties: false
        description: ADX ACIF output ports

required:
  - compatible
  - reg

additionalProperties: false

examples:
  - |

    adx@702d3800 {
        compatible = "nvidia,tegra210-adx";
        reg = <0x702d3800 0x100>;
        sound-name-prefix = "ADX1";
    };

...