blob: ec27aa4730d4f578681c4daba49423f44be400cf [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+
/*
* dt3000.c
* Data Translation DT3000 series driver
*
* COMEDI - Linux Control and Measurement Device Interface
* Copyright (C) 1999 David A. Schleef <ds@schleef.org>
*/
/*
* Driver: dt3000
* Description: Data Translation DT3000 series
* Devices: [Data Translation] DT3001 (dt3000), DT3001-PGL, DT3002, DT3003,
* DT3003-PGL, DT3004, DT3005, DT3004-200
* Author: ds
* Updated: Mon, 14 Apr 2008 15:41:24 +0100
* Status: works
*
* Configuration Options: not applicable, uses PCI auto config
*
* There is code to support AI commands, but it may not work.
*
* AO commands are not supported.
*/
/*
* The DT3000 series is Data Translation's attempt to make a PCI
* data acquisition board. The design of this series is very nice,
* since each board has an on-board DSP (Texas Instruments TMS320C52).
* However, a few details are a little annoying. The boards lack
* bus-mastering DMA, which eliminates them from serious work.
* They also are not capable of autocalibration, which is a common
* feature in modern hardware. The default firmware is pretty bad,
* making it nearly impossible to write an RT compatible driver.
* It would make an interesting project to write a decent firmware
* for these boards.
*
* Data Translation originally wanted an NDA for the documentation
* for the 3k series. However, if you ask nicely, they might send
* you the docs without one, also.
*/
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include "../comedi_pci.h"
/*
* PCI BAR0 - dual-ported RAM location definitions (dev->mmio)
*/
#define DPR_DAC_BUFFER (4 * 0x000)
#define DPR_ADC_BUFFER (4 * 0x800)
#define DPR_COMMAND (4 * 0xfd3)
#define DPR_SUBSYS (4 * 0xfd3)
#define DPR_SUBSYS_AI 0
#define DPR_SUBSYS_AO 1
#define DPR_SUBSYS_DIN 2
#define DPR_SUBSYS_DOUT 3
#define DPR_SUBSYS_MEM 4
#define DPR_SUBSYS_CT 5
#define DPR_ENCODE (4 * 0xfd4)
#define DPR_PARAMS(x) (4 * (0xfd5 + (x)))
#define DPR_TICK_REG_LO (4 * 0xff5)
#define DPR_TICK_REG_HI (4 * 0xff6)
#define DPR_DA_BUF_FRONT (4 * 0xff7)
#define DPR_DA_BUF_REAR (4 * 0xff8)
#define DPR_AD_BUF_FRONT (4 * 0xff9)
#define DPR_AD_BUF_REAR (4 * 0xffa)
#define DPR_INT_MASK (4 * 0xffb)
#define DPR_INTR_FLAG (4 * 0xffc)
#define DPR_INTR_CMDONE BIT(7)
#define DPR_INTR_CTDONE BIT(6)
#define DPR_INTR_DAHWERR BIT(5)
#define DPR_INTR_DASWERR BIT(4)
#define DPR_INTR_DAEMPTY BIT(3)
#define DPR_INTR_ADHWERR BIT(2)
#define DPR_INTR_ADSWERR BIT(1)
#define DPR_INTR_ADFULL BIT(0)
#define DPR_RESPONSE_MBX (4 * 0xffe)
#define DPR_CMD_MBX (4 * 0xfff)
#define DPR_CMD_COMPLETION(x) ((x) << 8)
#define DPR_CMD_NOTPROCESSED DPR_CMD_COMPLETION(0x00)
#define DPR_CMD_NOERROR DPR_CMD_COMPLETION(0x55)
#define DPR_CMD_ERROR DPR_CMD_COMPLETION(0xaa)
#define DPR_CMD_NOTSUPPORTED DPR_CMD_COMPLETION(0xff)
#define DPR_CMD_COMPLETION_MASK DPR_CMD_COMPLETION(0xff)
#define DPR_CMD(x) ((x) << 0)
#define DPR_CMD_GETBRDINFO DPR_CMD(0)
#define DPR_CMD_CONFIG DPR_CMD(1)
#define DPR_CMD_GETCONFIG DPR_CMD(2)
#define DPR_CMD_START DPR_CMD(3)
#define DPR_CMD_STOP DPR_CMD(4)
#define DPR_CMD_READSINGLE DPR_CMD(5)
#define DPR_CMD_WRITESINGLE DPR_CMD(6)
#define DPR_CMD_CALCCLOCK DPR_CMD(7)
#define DPR_CMD_READEVENTS DPR_CMD(8)
#define DPR_CMD_WRITECTCTRL DPR_CMD(16)
#define DPR_CMD_READCTCTRL DPR_CMD(17)
#define DPR_CMD_WRITECT DPR_CMD(18)
#define DPR_CMD_READCT DPR_CMD(19)
#define DPR_CMD_WRITEDATA DPR_CMD(32)
#define DPR_CMD_READDATA DPR_CMD(33)
#define DPR_CMD_WRITEIO DPR_CMD(34)
#define DPR_CMD_READIO DPR_CMD(35)
#define DPR_CMD_WRITECODE DPR_CMD(36)
#define DPR_CMD_READCODE DPR_CMD(37)
#define DPR_CMD_EXECUTE DPR_CMD(38)
#define DPR_CMD_HALT DPR_CMD(48)
#define DPR_CMD_MASK DPR_CMD(0xff)
#define DPR_PARAM5_AD_TRIG(x) (((x) & 0x7) << 2)
#define DPR_PARAM5_AD_TRIG_INT DPR_PARAM5_AD_TRIG(0)
#define DPR_PARAM5_AD_TRIG_EXT DPR_PARAM5_AD_TRIG(1)
#define DPR_PARAM5_AD_TRIG_INT_RETRIG DPR_PARAM5_AD_TRIG(2)
#define DPR_PARAM5_AD_TRIG_EXT_RETRIG DPR_PARAM5_AD_TRIG(3)
#define DPR_PARAM5_AD_TRIG_INT_RETRIG2 DPR_PARAM5_AD_TRIG(4)
#define DPR_PARAM6_AD_DIFF BIT(0)
#define DPR_AI_FIFO_DEPTH 2003
#define DPR_AO_FIFO_DEPTH 2048
#define DPR_EXTERNAL_CLOCK 1
#define DPR_RISING_EDGE 2
#define DPR_TMODE_MASK 0x1c
#define DPR_CMD_TIMEOUT 100
static const struct comedi_lrange range_dt3000_ai = {
4, {
BIP_RANGE(10),
BIP_RANGE(5),
BIP_RANGE(2.5),
BIP_RANGE(1.25)
}
};
static const struct comedi_lrange range_dt3000_ai_pgl = {
4, {
BIP_RANGE(10),
BIP_RANGE(1),
BIP_RANGE(0.1),
BIP_RANGE(0.02)
}
};
enum dt3k_boardid {
BOARD_DT3001,
BOARD_DT3001_PGL,
BOARD_DT3002,
BOARD_DT3003,
BOARD_DT3003_PGL,
BOARD_DT3004,
BOARD_DT3005,
};
struct dt3k_boardtype {
const char *name;
int adchan;
int ai_speed;
const struct comedi_lrange *adrange;
unsigned int ai_is_16bit:1;
unsigned int has_ao:1;
};
static const struct dt3k_boardtype dt3k_boardtypes[] = {
[BOARD_DT3001] = {
.name = "dt3001",
.adchan = 16,
.adrange = &range_dt3000_ai,
.ai_speed = 3000,
.has_ao = 1,
},
[BOARD_DT3001_PGL] = {
.name = "dt3001-pgl",
.adchan = 16,
.adrange = &range_dt3000_ai_pgl,
.ai_speed = 3000,
.has_ao = 1,
},
[BOARD_DT3002] = {
.name = "dt3002",
.adchan = 32,
.adrange = &range_dt3000_ai,
.ai_speed = 3000,
},
[BOARD_DT3003] = {
.name = "dt3003",
.adchan = 64,
.adrange = &range_dt3000_ai,
.ai_speed = 3000,
.has_ao = 1,
},
[BOARD_DT3003_PGL] = {
.name = "dt3003-pgl",
.adchan = 64,
.adrange = &range_dt3000_ai_pgl,
.ai_speed = 3000,
.has_ao = 1,
},
[BOARD_DT3004] = {
.name = "dt3004",
.adchan = 16,
.adrange = &range_dt3000_ai,
.ai_speed = 10000,
.ai_is_16bit = 1,
.has_ao = 1,
},
[BOARD_DT3005] = {
.name = "dt3005", /* a.k.a. 3004-200 */
.adchan = 16,
.adrange = &range_dt3000_ai,
.ai_speed = 5000,
.ai_is_16bit = 1,
.has_ao = 1,
},
};
struct dt3k_private {
unsigned int lock;
unsigned int ai_front;
unsigned int ai_rear;
};
static void dt3k_send_cmd(struct comedi_device *dev, unsigned int cmd)
{
int i;
unsigned int status = 0;
writew(cmd, dev->mmio + DPR_CMD_MBX);
for (i = 0; i < DPR_CMD_TIMEOUT; i++) {
status = readw(dev->mmio + DPR_CMD_MBX);
status &= DPR_CMD_COMPLETION_MASK;
if (status != DPR_CMD_NOTPROCESSED)
break;
udelay(1);
}
if (status != DPR_CMD_NOERROR)
dev_dbg(dev->class_dev, "%s: timeout/error status=0x%04x\n",
__func__, status);
}
static unsigned int dt3k_readsingle(struct comedi_device *dev,
unsigned int subsys, unsigned int chan,
unsigned int gain)
{
writew(subsys, dev->mmio + DPR_SUBSYS);
writew(chan, dev->mmio + DPR_PARAMS(0));
writew(gain, dev->mmio + DPR_PARAMS(1));
dt3k_send_cmd(dev, DPR_CMD_READSINGLE);
return readw(dev->mmio + DPR_PARAMS(2));
}
static void dt3k_writesingle(struct comedi_device *dev, unsigned int subsys,
unsigned int chan, unsigned int data)
{
writew(subsys, dev->mmio + DPR_SUBSYS);
writew(chan, dev->mmio + DPR_PARAMS(0));
writew(0, dev->mmio + DPR_PARAMS(1));
writew(data, dev->mmio + DPR_PARAMS(2));
dt3k_send_cmd(dev, DPR_CMD_WRITESINGLE);
}
static void dt3k_ai_empty_fifo(struct comedi_device *dev,
struct comedi_subdevice *s)
{
struct dt3k_private *devpriv = dev->private;
int front;
int rear;
int count;
int i;
unsigned short data;
front = readw(dev->mmio + DPR_AD_BUF_FRONT);
count = front - devpriv->ai_front;
if (count < 0)
count += DPR_AI_FIFO_DEPTH;
rear = devpriv->ai_rear;
for (i = 0; i < count; i++) {
data = readw(dev->mmio + DPR_ADC_BUFFER + rear);
comedi_buf_write_samples(s, &data, 1);
rear++;
if (rear >= DPR_AI_FIFO_DEPTH)
rear = 0;
}
devpriv->ai_rear = rear;
writew(rear, dev->mmio + DPR_AD_BUF_REAR);
}
static int dt3k_ai_cancel(struct comedi_device *dev,
struct comedi_subdevice *s)
{
writew(DPR_SUBSYS_AI, dev->mmio + DPR_SUBSYS);
dt3k_send_cmd(dev, DPR_CMD_STOP);
writew(0, dev->mmio + DPR_INT_MASK);
return 0;
}
static int debug_n_ints;
/* FIXME! Assumes shared interrupt is for this card. */
/* What's this debug_n_ints stuff? Obviously needs some work... */
static irqreturn_t dt3k_interrupt(int irq, void *d)
{
struct comedi_device *dev = d;
struct comedi_subdevice *s = dev->read_subdev;
unsigned int status;
if (!dev->attached)
return IRQ_NONE;
status = readw(dev->mmio + DPR_INTR_FLAG);
if (status & DPR_INTR_ADFULL)
dt3k_ai_empty_fifo(dev, s);
if (status & (DPR_INTR_ADSWERR | DPR_INTR_ADHWERR))
s->async->events |= COMEDI_CB_ERROR;
debug_n_ints++;
if (debug_n_ints >= 10)
s->async->events |= COMEDI_CB_EOA;
comedi_handle_events(dev, s);
return IRQ_HANDLED;
}
static int dt3k_ns_to_timer(unsigned int timer_base, unsigned int *nanosec,
unsigned int flags)
{
unsigned int divider, base, prescale;
/* This function needs improvement */
/* Don't know if divider==0 works. */
for (prescale = 0; prescale < 16; prescale++) {
base = timer_base * (prescale + 1);
switch (flags & CMDF_ROUND_MASK) {
case CMDF_ROUND_NEAREST:
default:
divider = DIV_ROUND_CLOSEST(*nanosec, base);
break;
case CMDF_ROUND_DOWN:
divider = (*nanosec) / base;
break;
case CMDF_ROUND_UP:
divider = DIV_ROUND_UP(*nanosec, base);
break;
}
if (divider < 65536) {
*nanosec = divider * base;
return (prescale << 16) | (divider);
}
}
prescale = 15;
base = timer_base * (prescale + 1);
divider = 65535;
*nanosec = divider * base;
return (prescale << 16) | (divider);
}
static int dt3k_ai_cmdtest(struct comedi_device *dev,
struct comedi_subdevice *s, struct comedi_cmd *cmd)
{
const struct dt3k_boardtype *board = dev->board_ptr;
int err = 0;
unsigned int arg;
/* Step 1 : check if triggers are trivially valid */
err |= comedi_check_trigger_src(&cmd->start_src, TRIG_NOW);
err |= comedi_check_trigger_src(&cmd->scan_begin_src, TRIG_TIMER);
err |= comedi_check_trigger_src(&cmd->convert_src, TRIG_TIMER);
err |= comedi_check_trigger_src(&cmd->scan_end_src, TRIG_COUNT);
err |= comedi_check_trigger_src(&cmd->stop_src, TRIG_COUNT);
if (err)
return 1;
/* Step 2a : make sure trigger sources are unique */
/* Step 2b : and mutually compatible */
/* Step 3: check if arguments are trivially valid */
err |= comedi_check_trigger_arg_is(&cmd->start_arg, 0);
if (cmd->scan_begin_src == TRIG_TIMER) {
err |= comedi_check_trigger_arg_min(&cmd->scan_begin_arg,
board->ai_speed);
err |= comedi_check_trigger_arg_max(&cmd->scan_begin_arg,
100 * 16 * 65535);
}
if (cmd->convert_src == TRIG_TIMER) {
err |= comedi_check_trigger_arg_min(&cmd->convert_arg,
board->ai_speed);
err |= comedi_check_trigger_arg_max(&cmd->convert_arg,
50 * 16 * 65535);
}
err |= comedi_check_trigger_arg_is(&cmd->scan_end_arg,
cmd->chanlist_len);
if (cmd->stop_src == TRIG_COUNT)
err |= comedi_check_trigger_arg_max(&cmd->stop_arg, 0x00ffffff);
else /* TRIG_NONE */
err |= comedi_check_trigger_arg_is(&cmd->stop_arg, 0);
if (err)
return 3;
/* step 4: fix up any arguments */
if (cmd->scan_begin_src == TRIG_TIMER) {
arg = cmd->scan_begin_arg;
dt3k_ns_to_timer(100, &arg, cmd->flags);
err |= comedi_check_trigger_arg_is(&cmd->scan_begin_arg, arg);
}
if (cmd->convert_src == TRIG_TIMER) {
arg = cmd->convert_arg;
dt3k_ns_to_timer(50, &arg, cmd->flags);
err |= comedi_check_trigger_arg_is(&cmd->convert_arg, arg);
if (cmd->scan_begin_src == TRIG_TIMER) {
arg = cmd->convert_arg * cmd->scan_end_arg;
err |= comedi_check_trigger_arg_min(
&cmd->scan_begin_arg, arg);
}
}
if (err)
return 4;
return 0;
}
static int dt3k_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
{
struct comedi_cmd *cmd = &s->async->cmd;
int i;
unsigned int chan, range, aref;
unsigned int divider;
unsigned int tscandiv;
for (i = 0; i < cmd->chanlist_len; i++) {
chan = CR_CHAN(cmd->chanlist[i]);
range = CR_RANGE(cmd->chanlist[i]);
writew((range << 6) | chan, dev->mmio + DPR_ADC_BUFFER + i);
}
aref = CR_AREF(cmd->chanlist[0]);
writew(cmd->scan_end_arg, dev->mmio + DPR_PARAMS(0));
if (cmd->convert_src == TRIG_TIMER) {
divider = dt3k_ns_to_timer(50, &cmd->convert_arg, cmd->flags);
writew((divider >> 16), dev->mmio + DPR_PARAMS(1));
writew((divider & 0xffff), dev->mmio + DPR_PARAMS(2));
}
if (cmd->scan_begin_src == TRIG_TIMER) {
tscandiv = dt3k_ns_to_timer(100, &cmd->scan_begin_arg,
cmd->flags);
writew((tscandiv >> 16), dev->mmio + DPR_PARAMS(3));
writew((tscandiv & 0xffff), dev->mmio + DPR_PARAMS(4));
}
writew(DPR_PARAM5_AD_TRIG_INT_RETRIG, dev->mmio + DPR_PARAMS(5));
writew((aref == AREF_DIFF) ? DPR_PARAM6_AD_DIFF : 0,
dev->mmio + DPR_PARAMS(6));
writew(DPR_AI_FIFO_DEPTH / 2, dev->mmio + DPR_PARAMS(7));
writew(DPR_SUBSYS_AI, dev->mmio + DPR_SUBSYS);
dt3k_send_cmd(dev, DPR_CMD_CONFIG);
writew(DPR_INTR_ADFULL | DPR_INTR_ADSWERR | DPR_INTR_ADHWERR,
dev->mmio + DPR_INT_MASK);
debug_n_ints = 0;
writew(DPR_SUBSYS_AI, dev->mmio + DPR_SUBSYS);
dt3k_send_cmd(dev, DPR_CMD_START);
return 0;
}
static int dt3k_ai_insn_read(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
unsigned int *data)
{
int i;
unsigned int chan, gain;
chan = CR_CHAN(insn->chanspec);
gain = CR_RANGE(insn->chanspec);
/* XXX docs don't explain how to select aref */
for (i = 0; i < insn->n; i++)
data[i] = dt3k_readsingle(dev, DPR_SUBSYS_AI, chan, gain);
return i;
}
static int dt3k_ao_insn_write(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
unsigned int *data)
{
unsigned int chan = CR_CHAN(insn->chanspec);
unsigned int val = s->readback[chan];
int i;
for (i = 0; i < insn->n; i++) {
val = data[i];
dt3k_writesingle(dev, DPR_SUBSYS_AO, chan, val);
}
s->readback[chan] = val;
return insn->n;
}
static void dt3k_dio_config(struct comedi_device *dev, int bits)
{
/* XXX */
writew(DPR_SUBSYS_DOUT, dev->mmio + DPR_SUBSYS);
writew(bits, dev->mmio + DPR_PARAMS(0));
/* XXX write 0 to DPR_PARAMS(1) and DPR_PARAMS(2) ? */
dt3k_send_cmd(dev, DPR_CMD_CONFIG);
}
static int dt3k_dio_insn_config(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
unsigned int *data)
{
unsigned int chan = CR_CHAN(insn->chanspec);
unsigned int mask;
int ret;
if (chan < 4)
mask = 0x0f;
else
mask = 0xf0;
ret = comedi_dio_insn_config(dev, s, insn, data, mask);
if (ret)
return ret;
dt3k_dio_config(dev, (s->io_bits & 0x01) | ((s->io_bits & 0x10) >> 3));
return insn->n;
}
static int dt3k_dio_insn_bits(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
unsigned int *data)
{
if (comedi_dio_update_state(s, data))
dt3k_writesingle(dev, DPR_SUBSYS_DOUT, 0, s->state);
data[1] = dt3k_readsingle(dev, DPR_SUBSYS_DIN, 0, 0);
return insn->n;
}
static int dt3k_mem_insn_read(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
unsigned int *data)
{
unsigned int addr = CR_CHAN(insn->chanspec);
int i;
for (i = 0; i < insn->n; i++) {
writew(DPR_SUBSYS_MEM, dev->mmio + DPR_SUBSYS);
writew(addr, dev->mmio + DPR_PARAMS(0));
writew(1, dev->mmio + DPR_PARAMS(1));
dt3k_send_cmd(dev, DPR_CMD_READCODE);
data[i] = readw(dev->mmio + DPR_PARAMS(2));
}
return i;
}
static int dt3000_auto_attach(struct comedi_device *dev,
unsigned long context)
{
struct pci_dev *pcidev = comedi_to_pci_dev(dev);
const struct dt3k_boardtype *board = NULL;
struct dt3k_private *devpriv;
struct comedi_subdevice *s;
int ret = 0;
if (context < ARRAY_SIZE(dt3k_boardtypes))
board = &dt3k_boardtypes[context];
if (!board)
return -ENODEV;
dev->board_ptr = board;
dev->board_name = board->name;
devpriv = comedi_alloc_devpriv(dev, sizeof(*devpriv));
if (!devpriv)
return -ENOMEM;
ret = comedi_pci_enable(dev);
if (ret < 0)
return ret;
dev->mmio = pci_ioremap_bar(pcidev, 0);
if (!dev->mmio)
return -ENOMEM;
if (pcidev->irq) {
ret = request_irq(pcidev->irq, dt3k_interrupt, IRQF_SHARED,
dev->board_name, dev);
if (ret == 0)
dev->irq = pcidev->irq;
}
ret = comedi_alloc_subdevices(dev, 4);
if (ret)
return ret;
/* Analog Input subdevice */
s = &dev->subdevices[0];
s->type = COMEDI_SUBD_AI;
s->subdev_flags = SDF_READABLE | SDF_GROUND | SDF_DIFF;
s->n_chan = board->adchan;
s->maxdata = board->ai_is_16bit ? 0xffff : 0x0fff;
s->range_table = &range_dt3000_ai; /* XXX */
s->insn_read = dt3k_ai_insn_read;
if (dev->irq) {
dev->read_subdev = s;
s->subdev_flags |= SDF_CMD_READ;
s->len_chanlist = 512;
s->do_cmd = dt3k_ai_cmd;
s->do_cmdtest = dt3k_ai_cmdtest;
s->cancel = dt3k_ai_cancel;
}
/* Analog Output subdevice */
s = &dev->subdevices[1];
if (board->has_ao) {
s->type = COMEDI_SUBD_AO;
s->subdev_flags = SDF_WRITABLE;
s->n_chan = 2;
s->maxdata = 0x0fff;
s->range_table = &range_bipolar10;
s->insn_write = dt3k_ao_insn_write;
ret = comedi_alloc_subdev_readback(s);
if (ret)
return ret;
} else {
s->type = COMEDI_SUBD_UNUSED;
}
/* Digital I/O subdevice */
s = &dev->subdevices[2];
s->type = COMEDI_SUBD_DIO;
s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
s->n_chan = 8;
s->maxdata = 1;
s->range_table = &range_digital;
s->insn_config = dt3k_dio_insn_config;
s->insn_bits = dt3k_dio_insn_bits;
/* Memory subdevice */
s = &dev->subdevices[3];
s->type = COMEDI_SUBD_MEMORY;
s->subdev_flags = SDF_READABLE;
s->n_chan = 0x1000;
s->maxdata = 0xff;
s->range_table = &range_unknown;
s->insn_read = dt3k_mem_insn_read;
return 0;
}
static struct comedi_driver dt3000_driver = {
.driver_name = "dt3000",
.module = THIS_MODULE,
.auto_attach = dt3000_auto_attach,
.detach = comedi_pci_detach,
};
static int dt3000_pci_probe(struct pci_dev *dev,
const struct pci_device_id *id)
{
return comedi_pci_auto_config(dev, &dt3000_driver, id->driver_data);
}
static const struct pci_device_id dt3000_pci_table[] = {
{ PCI_VDEVICE(DT, 0x0022), BOARD_DT3001 },
{ PCI_VDEVICE(DT, 0x0023), BOARD_DT3002 },
{ PCI_VDEVICE(DT, 0x0024), BOARD_DT3003 },
{ PCI_VDEVICE(DT, 0x0025), BOARD_DT3004 },
{ PCI_VDEVICE(DT, 0x0026), BOARD_DT3005 },
{ PCI_VDEVICE(DT, 0x0027), BOARD_DT3001_PGL },
{ PCI_VDEVICE(DT, 0x0028), BOARD_DT3003_PGL },
{ 0 }
};
MODULE_DEVICE_TABLE(pci, dt3000_pci_table);
static struct pci_driver dt3000_pci_driver = {
.name = "dt3000",
.id_table = dt3000_pci_table,
.probe = dt3000_pci_probe,
.remove = comedi_pci_auto_unconfig,
};
module_comedi_pci_driver(dt3000_driver, dt3000_pci_driver);
MODULE_AUTHOR("Comedi https://www.comedi.org");
MODULE_DESCRIPTION("Comedi driver for Data Translation DT3000 series boards");
MODULE_LICENSE("GPL");