blob: 03698231558447520beec46d4d16d964bf87a7b7 [file] [log] [blame]
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* comedi/drivers/ni_routes.h
* Route information for NI boards.
*
* COMEDI - Linux Control and Measurement Device Interface
* Copyright (C) 2016 Spencer E. Olson <olsonse@umich.edu>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef _COMEDI_DRIVERS_NI_ROUTES_H
#define _COMEDI_DRIVERS_NI_ROUTES_H
#include <linux/types.h>
#include <linux/errno.h>
#ifndef NI_ROUTE_VALUE_EXTERNAL_CONVERSION
#include <linux/bitops.h>
#endif
#include "../comedi.h"
/**
* struct ni_route_set - Set of destinations with a common source.
* @dest: Destination of all sources in this route set.
* @n_src: Number of sources for this route set.
* @src: List of sources that all map to the same destination.
*/
struct ni_route_set {
int dest;
int n_src;
int *src;
};
/**
* struct ni_device_routes - List of all src->dest sets for a particular device.
* @device: Name of board/device (e.g. pxi-6733).
* @n_route_sets: Number of route sets that are valid for this device.
* @routes: List of route sets that are valid for this device.
*/
struct ni_device_routes {
const char *device;
int n_route_sets;
struct ni_route_set *routes;
};
/**
* struct ni_route_tables - Register values and valid routes for a device.
* @valid_routes: Pointer to a all valid route sets for a single device.
* @route_values: Pointer to register values for all routes for the family to
* which the device belongs.
*
* Link to the valid src->dest routes and the register values used to assign
* such routes for that particular device.
*/
struct ni_route_tables {
const struct ni_device_routes *valid_routes;
const u8 *route_values;
};
/*
* ni_assign_device_routes() - Assign the proper lookup table for NI signal
* routing to the specified NI device.
*
* Return: -ENODATA if assignment was not successful; 0 if successful.
*/
int ni_assign_device_routes(const char *device_family,
const char *board_name,
const char *alt_board_name,
struct ni_route_tables *tables);
/*
* ni_find_route_set() - Finds the proper route set with the specified
* destination.
* @destination: Destination of which to search for the route set.
* @valid_routes: Pointer to device routes within which to search.
*
* Return: NULL if no route_set is found with the specified @destination;
* otherwise, a pointer to the route_set if found.
*/
const struct ni_route_set *
ni_find_route_set(const int destination,
const struct ni_device_routes *valid_routes);
/*
* ni_route_set_has_source() - Determines whether the given source is in
* included given route_set.
*
* Return: true if found; false otherwise.
*/
bool ni_route_set_has_source(const struct ni_route_set *routes, const int src);
/*
* ni_route_to_register() - Validates and converts the specified signal route
* (src-->dest) to the value used at the appropriate
* register.
* @src: global-identifier for route source
* @dest: global-identifier for route destination
* @tables: pointer to relevant set of routing tables.
*
* Generally speaking, most routes require the first six bits and a few require
* 7 bits. Special handling is given for the return value when the route is to
* be handled by the RTSI sub-device. In this case, the returned register may
* not be sufficient to define the entire route path, but rather may only
* indicate the intermediate route. For example, if the route must go through
* the RGOUT0 pin, the (src->RGOUT0) register value will be returned.
* Similarly, if the route must go through the NI_RTSI_BRD lines, the BIT(6)
* will be set:
*
* if route does not need RTSI_BRD lines:
* bits 0:7 : register value
* for a route that must go through RGOUT0 pin, this will be equal
* to the (src->RGOUT0) register value.
* else: * route is (src->RTSI_BRD(x), RTSI_BRD(x)->TRIGGER_LINE(i)) *
* bits 0:5 : zero
* bits 6 : set to 1
* bits 7:7 : zero
*
* Return: register value to be used for source at destination with special
* cases given above; Otherwise, -1 if the specified route is not valid for
* this particular device.
*/
s8 ni_route_to_register(const int src, const int dest,
const struct ni_route_tables *tables);
static inline bool ni_rtsi_route_requires_mux(s8 value)
{
return value & BIT(6);
}
/*
* ni_lookup_route_register() - Look up a register value for a particular route
* without checking whether the route is valid for
* the particular device.
* @src: global-identifier for route source
* @dest: global-identifier for route destination
* @tables: pointer to relevant set of routing tables.
*
* Return: -EINVAL if the specified route is not valid for this device family.
*/
s8 ni_lookup_route_register(int src, int dest,
const struct ni_route_tables *tables);
/**
* route_is_valid() - Determines whether the specified signal route (src-->dest)
* is valid for the given NI comedi_device.
* @src: global-identifier for route source
* @dest: global-identifier for route destination
* @tables: pointer to relevant set of routing tables.
*
* Return: True if the route is valid, otherwise false.
*/
static inline bool route_is_valid(const int src, const int dest,
const struct ni_route_tables *tables)
{
return ni_route_to_register(src, dest, tables) >= 0;
}
/*
* ni_is_cmd_dest() - Determine whether the given destination is only
* configurable via a comedi_cmd struct.
* @dest: Destination to test.
*/
bool ni_is_cmd_dest(int dest);
static inline bool channel_is_pfi(int channel)
{
return NI_PFI(0) <= channel && channel <= NI_PFI(-1);
}
static inline bool channel_is_rtsi(int channel)
{
return TRIGGER_LINE(0) <= channel && channel <= TRIGGER_LINE(-1);
}
static inline bool channel_is_ctr(int channel)
{
return channel >= NI_COUNTER_NAMES_BASE &&
channel <= NI_COUNTER_NAMES_MAX;
}
/*
* ni_count_valid_routes() - Count the number of valid routes.
* @tables: Routing tables for which to count all valid routes.
*/
unsigned int ni_count_valid_routes(const struct ni_route_tables *tables);
/*
* ni_get_valid_routes() - Implements INSN_DEVICE_CONFIG_GET_ROUTES.
* @tables: pointer to relevant set of routing tables.
* @n_pairs: Number of pairs for which memory is allocated by the user. If
* the user specifies '0', only the number of available pairs is
* returned.
* @pair_data: Pointer to memory allocated to return pairs back to user. Each
* even, odd indexed member of this array will hold source,
* destination of a route pair respectively.
*
* Return: the number of valid routes if n_pairs == 0; otherwise, the number of
* valid routes copied.
*/
unsigned int ni_get_valid_routes(const struct ni_route_tables *tables,
unsigned int n_pairs,
unsigned int *pair_data);
/*
* ni_sort_device_routes() - Sort the list of valid device signal routes in
* preparation for use.
* @valid_routes: pointer to ni_device_routes struct to sort.
*/
void ni_sort_device_routes(struct ni_device_routes *valid_routes);
/*
* ni_find_route_source() - Finds the signal source corresponding to a signal
* route (src-->dest) of the specified routing register
* value and the specified route destination on the
* specified device.
*
* Note that this function does _not_ validate the source based on device
* routes.
*
* Return: The NI signal value (e.g. NI_PFI(0) or PXI_Clk10) if found.
* If the source was not found (i.e. the register value is not
* valid for any routes to the destination), -EINVAL is returned.
*/
int ni_find_route_source(const u8 src_sel_reg_value, const int dest,
const struct ni_route_tables *tables);
/**
* route_register_is_valid() - Determines whether the register value for the
* specified route destination on the specified
* device is valid.
*/
static inline bool route_register_is_valid(const u8 src_sel_reg_value,
const int dest,
const struct ni_route_tables *tables)
{
return ni_find_route_source(src_sel_reg_value, dest, tables) >= 0;
}
/**
* ni_get_reg_value_roffs() - Determines the proper register value for a
* particular valid NI signal/terminal route.
* @src: Either a direct register value or one of NI_* signal names.
* @dest: global-identifier for route destination
* @tables: pointer to relevant set of routing tables.
* @direct_reg_offset:
* Compatibility compensation argument. This argument allows us to
* arbitrarily apply an offset to src if src is a direct register
* value reference. This is necessary to be compatible with
* definitions of register values as previously exported directly
* to user space.
*
* Return: the register value (>0) to be used at the destination if the src is
* valid for the given destination; -1 otherwise.
*/
static inline s8 ni_get_reg_value_roffs(int src, const int dest,
const struct ni_route_tables *tables,
const int direct_reg_offset)
{
if (src < NI_NAMES_BASE) {
src += direct_reg_offset;
/*
* In this case, the src is expected to actually be a register
* value.
*/
if (route_register_is_valid(src, dest, tables))
return src;
return -1;
}
/*
* Otherwise, the src is expected to be one of the abstracted NI
* signal/terminal names.
*/
return ni_route_to_register(src, dest, tables);
}
static inline int ni_get_reg_value(const int src, const int dest,
const struct ni_route_tables *tables)
{
return ni_get_reg_value_roffs(src, dest, tables, 0);
}
/**
* ni_check_trigger_arg_roffs() - Checks the trigger argument (*_arg) of an NI
* device to ensure that the *_arg value
* corresponds to _either_ a valid register value
* to define a trigger source, _or_ a valid NI
* signal/terminal name that has a valid route to
* the destination on the particular device.
* @src: Either a direct register value or one of NI_* signal names.
* @dest: global-identifier for route destination
* @tables: pointer to relevant set of routing tables.
* @direct_reg_offset:
* Compatibility compensation argument. This argument allows us to
* arbitrarily apply an offset to src if src is a direct register
* value reference. This is necessary to be compatible with
* definitions of register values as previously exported directly
* to user space.
*
* Return: 0 if the src (either register value or NI signal/terminal name) is
* valid for the destination; -EINVAL otherwise.
*/
static inline
int ni_check_trigger_arg_roffs(int src, const int dest,
const struct ni_route_tables *tables,
const int direct_reg_offset)
{
if (ni_get_reg_value_roffs(src, dest, tables, direct_reg_offset) < 0)
return -EINVAL;
return 0;
}
static inline int ni_check_trigger_arg(const int src, const int dest,
const struct ni_route_tables *tables)
{
return ni_check_trigger_arg_roffs(src, dest, tables, 0);
}
#endif /* _COMEDI_DRIVERS_NI_ROUTES_H */