// SPDX-License-Identifier: GPL-2.0-or-later
/*
 *	linux/drivers/net/wireless/libertas/if_spi.c
 *
 *	Driver for Marvell SPI WLAN cards.
 *
 *	Copyright 2008 Analog Devices Inc.
 *
 *	Authors:
 *	Andrey Yurovsky <andrey@cozybit.com>
 *	Colin McCabe <colin@cozybit.com>
 *
 *	Inspired by if_sdio.c, Copyright 2007-2008 Pierre Ossman
 */

#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt

#include <linux/hardirq.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/firmware.h>
#include <linux/jiffies.h>
#include <linux/list.h>
#include <linux/netdevice.h>
#include <linux/slab.h>
#include <linux/spi/libertas_spi.h>
#include <linux/spi/spi.h>

#include "host.h"
#include "decl.h"
#include "defs.h"
#include "dev.h"
#include "if_spi.h"

struct if_spi_packet {
	struct list_head		list;
	u16				blen;
	u8				buffer[] __aligned(4);
};

struct if_spi_card {
	struct spi_device		*spi;
	struct lbs_private		*priv;
	struct libertas_spi_platform_data *pdata;

	/* The card ID and card revision, as reported by the hardware. */
	u16				card_id;
	u8				card_rev;

	/* The last time that we initiated an SPU operation */
	unsigned long			prev_xfer_time;

	int				use_dummy_writes;
	unsigned long			spu_port_delay;
	unsigned long			spu_reg_delay;

	/* Handles all SPI communication (except for FW load) */
	struct workqueue_struct		*workqueue;
	struct work_struct		packet_work;
	struct work_struct		resume_work;

	u8				cmd_buffer[IF_SPI_CMD_BUF_SIZE];

	/* A buffer of incoming packets from libertas core.
	 * Since we can't sleep in hw_host_to_card, we have to buffer
	 * them. */
	struct list_head		cmd_packet_list;
	struct list_head		data_packet_list;

	/* Protects cmd_packet_list and data_packet_list */
	spinlock_t			buffer_lock;

	/* True is card suspended */
	u8				suspended;
};

static void free_if_spi_card(struct if_spi_card *card)
{
	struct list_head *cursor, *next;
	struct if_spi_packet *packet;

	list_for_each_safe(cursor, next, &card->cmd_packet_list) {
		packet = container_of(cursor, struct if_spi_packet, list);
		list_del(&packet->list);
		kfree(packet);
	}
	list_for_each_safe(cursor, next, &card->data_packet_list) {
		packet = container_of(cursor, struct if_spi_packet, list);
		list_del(&packet->list);
		kfree(packet);
	}
	kfree(card);
}

#define MODEL_8385	0x04
#define MODEL_8686	0x0b
#define MODEL_8688	0x10

static const struct lbs_fw_table fw_table[] = {
	{ MODEL_8385, "libertas/gspi8385_helper.bin", "libertas/gspi8385.bin" },
	{ MODEL_8385, "libertas/gspi8385_hlp.bin", "libertas/gspi8385.bin" },
	{ MODEL_8686, "libertas/gspi8686_v9_helper.bin", "libertas/gspi8686_v9.bin" },
	{ MODEL_8686, "libertas/gspi8686_hlp.bin", "libertas/gspi8686.bin" },
	{ MODEL_8688, "libertas/gspi8688_helper.bin", "libertas/gspi8688.bin" },
	{ 0, NULL, NULL }
};
MODULE_FIRMWARE("libertas/gspi8385_helper.bin");
MODULE_FIRMWARE("libertas/gspi8385_hlp.bin");
MODULE_FIRMWARE("libertas/gspi8385.bin");
MODULE_FIRMWARE("libertas/gspi8686_v9_helper.bin");
MODULE_FIRMWARE("libertas/gspi8686_v9.bin");
MODULE_FIRMWARE("libertas/gspi8686_hlp.bin");
MODULE_FIRMWARE("libertas/gspi8686.bin");
MODULE_FIRMWARE("libertas/gspi8688_helper.bin");
MODULE_FIRMWARE("libertas/gspi8688.bin");


/*
 * SPI Interface Unit Routines
 *
 * The SPU sits between the host and the WLAN module.
 * All communication with the firmware is through SPU transactions.
 *
 * First we have to put a SPU register name on the bus. Then we can
 * either read from or write to that register.
 *
 */

static void spu_transaction_init(struct if_spi_card *card)
{
	if (!time_after(jiffies, card->prev_xfer_time + 1)) {
		/* Unfortunately, the SPU requires a delay between successive
		 * transactions. If our last transaction was more than a jiffy
		 * ago, we have obviously already delayed enough.
		 * If not, we have to busy-wait to be on the safe side. */
		ndelay(400);
	}
}

static void spu_transaction_finish(struct if_spi_card *card)
{
	card->prev_xfer_time = jiffies;
}

/*
 * Write out a byte buffer to an SPI register,
 * using a series of 16-bit transfers.
 */
static int spu_write(struct if_spi_card *card, u16 reg, const u8 *buf, int len)
{
	int err = 0;
	__le16 reg_out = cpu_to_le16(reg | IF_SPI_WRITE_OPERATION_MASK);
	struct spi_message m;
	struct spi_transfer reg_trans;
	struct spi_transfer data_trans;

	spi_message_init(&m);
	memset(&reg_trans, 0, sizeof(reg_trans));
	memset(&data_trans, 0, sizeof(data_trans));

	/* You must give an even number of bytes to the SPU, even if it
	 * doesn't care about the last one.  */
	BUG_ON(len & 0x1);

	spu_transaction_init(card);

	/* write SPU register index */
	reg_trans.tx_buf = &reg_out;
	reg_trans.len = sizeof(reg_out);

	data_trans.tx_buf = buf;
	data_trans.len = len;

	spi_message_add_tail(&reg_trans, &m);
	spi_message_add_tail(&data_trans, &m);

	err = spi_sync(card->spi, &m);
	spu_transaction_finish(card);
	return err;
}

static inline int spu_write_u16(struct if_spi_card *card, u16 reg, u16 val)
{
	__le16 buff;

	buff = cpu_to_le16(val);
	return spu_write(card, reg, (u8 *)&buff, sizeof(u16));
}

static inline int spu_reg_is_port_reg(u16 reg)
{
	switch (reg) {
	case IF_SPI_IO_RDWRPORT_REG:
	case IF_SPI_CMD_RDWRPORT_REG:
	case IF_SPI_DATA_RDWRPORT_REG:
		return 1;
	default:
		return 0;
	}
}

static int spu_read(struct if_spi_card *card, u16 reg, u8 *buf, int len)
{
	unsigned int delay;
	int err = 0;
	__le16 reg_out = cpu_to_le16(reg | IF_SPI_READ_OPERATION_MASK);
	struct spi_message m;
	struct spi_transfer reg_trans;
	struct spi_transfer dummy_trans;
	struct spi_transfer data_trans;

	/*
	 * You must take an even number of bytes from the SPU, even if you
	 * don't care about the last one.
	 */
	BUG_ON(len & 0x1);

	spu_transaction_init(card);

	spi_message_init(&m);
	memset(&reg_trans, 0, sizeof(reg_trans));
	memset(&dummy_trans, 0, sizeof(dummy_trans));
	memset(&data_trans, 0, sizeof(data_trans));

	/* write SPU register index */
	reg_trans.tx_buf = &reg_out;
	reg_trans.len = sizeof(reg_out);
	spi_message_add_tail(&reg_trans, &m);

	delay = spu_reg_is_port_reg(reg) ? card->spu_port_delay :
						card->spu_reg_delay;
	if (card->use_dummy_writes) {
		/* Clock in dummy cycles while the SPU fills the FIFO */
		dummy_trans.len = delay / 8;
		spi_message_add_tail(&dummy_trans, &m);
	} else {
		/* Busy-wait while the SPU fills the FIFO */
		reg_trans.delay.value =
			DIV_ROUND_UP((100 + (delay * 10)), 1000);
		reg_trans.delay.unit = SPI_DELAY_UNIT_USECS;
	}

	/* read in data */
	data_trans.rx_buf = buf;
	data_trans.len = len;
	spi_message_add_tail(&data_trans, &m);

	err = spi_sync(card->spi, &m);
	spu_transaction_finish(card);
	return err;
}

/* Read 16 bits from an SPI register */
static inline int spu_read_u16(struct if_spi_card *card, u16 reg, u16 *val)
{
	__le16 buf;
	int ret;

	ret = spu_read(card, reg, (u8 *)&buf, sizeof(buf));
	if (ret == 0)
		*val = le16_to_cpup(&buf);
	return ret;
}

/*
 * Read 32 bits from an SPI register.
 * The low 16 bits are read first.
 */
static int spu_read_u32(struct if_spi_card *card, u16 reg, u32 *val)
{
	__le32 buf;
	int err;

	err = spu_read(card, reg, (u8 *)&buf, sizeof(buf));
	if (!err)
		*val = le32_to_cpup(&buf);
	return err;
}

/*
 * Keep reading 16 bits from an SPI register until you get the correct result.
 *
 * If mask = 0, the correct result is any non-zero number.
 * If mask != 0, the correct result is any number where
 * number & target_mask == target
 *
 * Returns -ETIMEDOUT if a second passes without the correct result.
 */
static int spu_wait_for_u16(struct if_spi_card *card, u16 reg,
			u16 target_mask, u16 target)
{
	int err;
	unsigned long timeout = jiffies + 5*HZ;
	while (1) {
		u16 val;
		err = spu_read_u16(card, reg, &val);
		if (err)
			return err;
		if (target_mask) {
			if ((val & target_mask) == target)
				return 0;
		} else {
			if (val)
				return 0;
		}
		udelay(100);
		if (time_after(jiffies, timeout)) {
			pr_err("%s: timeout with val=%02x, target_mask=%02x, target=%02x\n",
			       __func__, val, target_mask, target);
			return -ETIMEDOUT;
		}
	}
}

/*
 * Read 16 bits from an SPI register until you receive a specific value.
 * Returns -ETIMEDOUT if a 4 tries pass without success.
 */
static int spu_wait_for_u32(struct if_spi_card *card, u32 reg, u32 target)
{
	int err, try;
	for (try = 0; try < 4; ++try) {
		u32 val = 0;
		err = spu_read_u32(card, reg, &val);
		if (err)
			return err;
		if (val == target)
			return 0;
		mdelay(100);
	}
	return -ETIMEDOUT;
}

static int spu_set_interrupt_mode(struct if_spi_card *card,
			   int suppress_host_int,
			   int auto_int)
{
	int err = 0;

	/*
	 * We can suppress a host interrupt by clearing the appropriate
	 * bit in the "host interrupt status mask" register
	 */
	if (suppress_host_int) {
		err = spu_write_u16(card, IF_SPI_HOST_INT_STATUS_MASK_REG, 0);
		if (err)
			return err;
	} else {
		err = spu_write_u16(card, IF_SPI_HOST_INT_STATUS_MASK_REG,
			      IF_SPI_HISM_TX_DOWNLOAD_RDY |
			      IF_SPI_HISM_RX_UPLOAD_RDY |
			      IF_SPI_HISM_CMD_DOWNLOAD_RDY |
			      IF_SPI_HISM_CARDEVENT |
			      IF_SPI_HISM_CMD_UPLOAD_RDY);
		if (err)
			return err;
	}

	/*
	 * If auto-interrupts are on, the completion of certain transactions
	 * will trigger an interrupt automatically. If auto-interrupts
	 * are off, we need to set the "Card Interrupt Cause" register to
	 * trigger a card interrupt.
	 */
	if (auto_int) {
		err = spu_write_u16(card, IF_SPI_HOST_INT_CTRL_REG,
				IF_SPI_HICT_TX_DOWNLOAD_OVER_AUTO |
				IF_SPI_HICT_RX_UPLOAD_OVER_AUTO |
				IF_SPI_HICT_CMD_DOWNLOAD_OVER_AUTO |
				IF_SPI_HICT_CMD_UPLOAD_OVER_AUTO);
		if (err)
			return err;
	} else {
		err = spu_write_u16(card, IF_SPI_HOST_INT_STATUS_MASK_REG, 0);
		if (err)
			return err;
	}
	return err;
}

static int spu_get_chip_revision(struct if_spi_card *card,
				  u16 *card_id, u8 *card_rev)
{
	int err = 0;
	u32 dev_ctrl;
	err = spu_read_u32(card, IF_SPI_DEVICEID_CTRL_REG, &dev_ctrl);
	if (err)
		return err;
	*card_id = IF_SPI_DEVICEID_CTRL_REG_TO_CARD_ID(dev_ctrl);
	*card_rev = IF_SPI_DEVICEID_CTRL_REG_TO_CARD_REV(dev_ctrl);
	return err;
}

static int spu_set_bus_mode(struct if_spi_card *card, u16 mode)
{
	int err = 0;
	u16 rval;
	/* set bus mode */
	err = spu_write_u16(card, IF_SPI_SPU_BUS_MODE_REG, mode);
	if (err)
		return err;
	/* Check that we were able to read back what we just wrote. */
	err = spu_read_u16(card, IF_SPI_SPU_BUS_MODE_REG, &rval);
	if (err)
		return err;
	if ((rval & 0xF) != mode) {
		pr_err("Can't read bus mode register\n");
		return -EIO;
	}
	return 0;
}

static int spu_init(struct if_spi_card *card, int use_dummy_writes)
{
	int err = 0;
	u32 delay;

	/*
	 * We have to start up in timed delay mode so that we can safely
	 * read the Delay Read Register.
	 */
	card->use_dummy_writes = 0;
	err = spu_set_bus_mode(card,
				IF_SPI_BUS_MODE_SPI_CLOCK_PHASE_RISING |
				IF_SPI_BUS_MODE_DELAY_METHOD_TIMED |
				IF_SPI_BUS_MODE_16_BIT_ADDRESS_16_BIT_DATA);
	if (err)
		return err;
	card->spu_port_delay = 1000;
	card->spu_reg_delay = 1000;
	err = spu_read_u32(card, IF_SPI_DELAY_READ_REG, &delay);
	if (err)
		return err;
	card->spu_port_delay = delay & 0x0000ffff;
	card->spu_reg_delay = (delay & 0xffff0000) >> 16;

	/* If dummy clock delay mode has been requested, switch to it now */
	if (use_dummy_writes) {
		card->use_dummy_writes = 1;
		err = spu_set_bus_mode(card,
				IF_SPI_BUS_MODE_SPI_CLOCK_PHASE_RISING |
				IF_SPI_BUS_MODE_DELAY_METHOD_DUMMY_CLOCK |
				IF_SPI_BUS_MODE_16_BIT_ADDRESS_16_BIT_DATA);
		if (err)
			return err;
	}

	lbs_deb_spi("Initialized SPU unit. "
		    "spu_port_delay=0x%04lx, spu_reg_delay=0x%04lx\n",
		    card->spu_port_delay, card->spu_reg_delay);
	return err;
}

/*
 * Firmware Loading
 */

static int if_spi_prog_helper_firmware(struct if_spi_card *card,
					const struct firmware *firmware)
{
	int err = 0;
	int bytes_remaining;
	const u8 *fw;
	u8 temp[HELPER_FW_LOAD_CHUNK_SZ];

	err = spu_set_interrupt_mode(card, 1, 0);
	if (err)
		goto out;

	bytes_remaining = firmware->size;
	fw = firmware->data;

	/* Load helper firmware image */
	while (bytes_remaining > 0) {
		/*
		 * Scratch pad 1 should contain the number of bytes we
		 * want to download to the firmware
		 */
		err = spu_write_u16(card, IF_SPI_SCRATCH_1_REG,
					HELPER_FW_LOAD_CHUNK_SZ);
		if (err)
			goto out;

		err = spu_wait_for_u16(card, IF_SPI_HOST_INT_STATUS_REG,
					IF_SPI_HIST_CMD_DOWNLOAD_RDY,
					IF_SPI_HIST_CMD_DOWNLOAD_RDY);
		if (err)
			goto out;

		/*
		 * Feed the data into the command read/write port reg
		 * in chunks of 64 bytes
		 */
		memset(temp, 0, sizeof(temp));
		memcpy(temp, fw,
		       min(bytes_remaining, HELPER_FW_LOAD_CHUNK_SZ));
		mdelay(10);
		err = spu_write(card, IF_SPI_CMD_RDWRPORT_REG,
					temp, HELPER_FW_LOAD_CHUNK_SZ);
		if (err)
			goto out;

		/* Interrupt the boot code */
		err = spu_write_u16(card, IF_SPI_HOST_INT_STATUS_REG, 0);
		if (err)
			goto out;
		err = spu_write_u16(card, IF_SPI_CARD_INT_CAUSE_REG,
				       IF_SPI_CIC_CMD_DOWNLOAD_OVER);
		if (err)
			goto out;
		bytes_remaining -= HELPER_FW_LOAD_CHUNK_SZ;
		fw += HELPER_FW_LOAD_CHUNK_SZ;
	}

	/*
	 * Once the helper / single stage firmware download is complete,
	 * write 0 to scratch pad 1 and interrupt the
	 * bootloader. This completes the helper download.
	 */
	err = spu_write_u16(card, IF_SPI_SCRATCH_1_REG, FIRMWARE_DNLD_OK);
	if (err)
		goto out;
	err = spu_write_u16(card, IF_SPI_HOST_INT_STATUS_REG, 0);
	if (err)
		goto out;
	err = spu_write_u16(card, IF_SPI_CARD_INT_CAUSE_REG,
				IF_SPI_CIC_CMD_DOWNLOAD_OVER);
out:
	if (err)
		pr_err("failed to load helper firmware (err=%d)\n", err);

	return err;
}

/*
 * Returns the length of the next packet the firmware expects us to send.
 * Sets crc_err if the previous transfer had a CRC error.
 */
static int if_spi_prog_main_firmware_check_len(struct if_spi_card *card,
						int *crc_err)
{
	u16 len;
	int err = 0;

	/*
	 * wait until the host interrupt status register indicates
	 * that we are ready to download
	 */
	err = spu_wait_for_u16(card, IF_SPI_HOST_INT_STATUS_REG,
				IF_SPI_HIST_CMD_DOWNLOAD_RDY,
				IF_SPI_HIST_CMD_DOWNLOAD_RDY);
	if (err) {
		pr_err("timed out waiting for host_int_status\n");
		return err;
	}

	/* Ask the device how many bytes of firmware it wants. */
	err = spu_read_u16(card, IF_SPI_SCRATCH_1_REG, &len);
	if (err)
		return err;

	if (len > IF_SPI_CMD_BUF_SIZE) {
		pr_err("firmware load device requested a larger transfer than we are prepared to handle (len = %d)\n",
		       len);
		return -EIO;
	}
	if (len & 0x1) {
		lbs_deb_spi("%s: crc error\n", __func__);
		len &= ~0x1;
		*crc_err = 1;
	} else
		*crc_err = 0;

	return len;
}

static int if_spi_prog_main_firmware(struct if_spi_card *card,
					const struct firmware *firmware)
{
	struct lbs_private *priv = card->priv;
	int len, prev_len;
	int bytes, crc_err = 0, err = 0;
	const u8 *fw;
	u16 num_crc_errs;

	err = spu_set_interrupt_mode(card, 1, 0);
	if (err)
		goto out;

	err = spu_wait_for_u16(card, IF_SPI_SCRATCH_1_REG, 0, 0);
	if (err) {
		netdev_err(priv->dev,
			   "%s: timed out waiting for initial scratch reg = 0\n",
			   __func__);
		goto out;
	}

	num_crc_errs = 0;
	prev_len = 0;
	bytes = firmware->size;
	fw = firmware->data;
	while ((len = if_spi_prog_main_firmware_check_len(card, &crc_err))) {
		if (len < 0) {
			err = len;
			goto out;
		}
		if (bytes < 0) {
			/*
			 * If there are no more bytes left, we would normally
			 * expect to have terminated with len = 0
			 */
			netdev_err(priv->dev,
				   "Firmware load wants more bytes than we have to offer.\n");
			break;
		}
		if (crc_err) {
			/* Previous transfer failed. */
			if (++num_crc_errs > MAX_MAIN_FW_LOAD_CRC_ERR) {
				pr_err("Too many CRC errors encountered in firmware load.\n");
				err = -EIO;
				goto out;
			}
		} else {
			/* Previous transfer succeeded. Advance counters. */
			bytes -= prev_len;
			fw += prev_len;
		}
		if (bytes < len) {
			memset(card->cmd_buffer, 0, len);
			memcpy(card->cmd_buffer, fw, bytes);
		} else
			memcpy(card->cmd_buffer, fw, len);

		err = spu_write_u16(card, IF_SPI_HOST_INT_STATUS_REG, 0);
		if (err)
			goto out;
		err = spu_write(card, IF_SPI_CMD_RDWRPORT_REG,
				card->cmd_buffer, len);
		if (err)
			goto out;
		err = spu_write_u16(card, IF_SPI_CARD_INT_CAUSE_REG ,
					IF_SPI_CIC_CMD_DOWNLOAD_OVER);
		if (err)
			goto out;
		prev_len = len;
	}
	if (bytes > prev_len) {
		pr_err("firmware load wants fewer bytes than we have to offer\n");
	}

	/* Confirm firmware download */
	err = spu_wait_for_u32(card, IF_SPI_SCRATCH_4_REG,
					SUCCESSFUL_FW_DOWNLOAD_MAGIC);
	if (err) {
		pr_err("failed to confirm the firmware download\n");
		goto out;
	}

out:
	if (err)
		pr_err("failed to load firmware (err=%d)\n", err);

	return err;
}

/*
 * SPI Transfer Thread
 *
 * The SPI worker handles all SPI transfers, so there is no need for a lock.
 */

/* Move a command from the card to the host */
static int if_spi_c2h_cmd(struct if_spi_card *card)
{
	struct lbs_private *priv = card->priv;
	unsigned long flags;
	int err = 0;
	u16 len;
	u8 i;

	/*
	 * We need a buffer big enough to handle whatever people send to
	 * hw_host_to_card
	 */
	BUILD_BUG_ON(IF_SPI_CMD_BUF_SIZE < LBS_CMD_BUFFER_SIZE);
	BUILD_BUG_ON(IF_SPI_CMD_BUF_SIZE < LBS_UPLD_SIZE);

	/*
	 * It's just annoying if the buffer size isn't a multiple of 4, because
	 * then we might have len < IF_SPI_CMD_BUF_SIZE but
	 * ALIGN(len, 4) > IF_SPI_CMD_BUF_SIZE
	 */
	BUILD_BUG_ON(IF_SPI_CMD_BUF_SIZE % 4 != 0);

	/* How many bytes are there to read? */
	err = spu_read_u16(card, IF_SPI_SCRATCH_2_REG, &len);
	if (err)
		goto out;
	if (!len) {
		netdev_err(priv->dev, "%s: error: card has no data for host\n",
			   __func__);
		err = -EINVAL;
		goto out;
	} else if (len > IF_SPI_CMD_BUF_SIZE) {
		netdev_err(priv->dev,
			   "%s: error: response packet too large: %d bytes, but maximum is %d\n",
			   __func__, len, IF_SPI_CMD_BUF_SIZE);
		err = -EINVAL;
		goto out;
	}

	/* Read the data from the WLAN module into our command buffer */
	err = spu_read(card, IF_SPI_CMD_RDWRPORT_REG,
				card->cmd_buffer, ALIGN(len, 4));
	if (err)
		goto out;

	spin_lock_irqsave(&priv->driver_lock, flags);
	i = (priv->resp_idx == 0) ? 1 : 0;
	BUG_ON(priv->resp_len[i]);
	priv->resp_len[i] = len;
	memcpy(priv->resp_buf[i], card->cmd_buffer, len);
	lbs_notify_command_response(priv, i);
	spin_unlock_irqrestore(&priv->driver_lock, flags);

out:
	if (err)
		netdev_err(priv->dev, "%s: err=%d\n", __func__, err);

	return err;
}

/* Move data from the card to the host */
static int if_spi_c2h_data(struct if_spi_card *card)
{
	struct lbs_private *priv = card->priv;
	struct sk_buff *skb;
	char *data;
	u16 len;
	int err = 0;

	/* How many bytes are there to read? */
	err = spu_read_u16(card, IF_SPI_SCRATCH_1_REG, &len);
	if (err)
		goto out;
	if (!len) {
		netdev_err(priv->dev, "%s: error: card has no data for host\n",
			   __func__);
		err = -EINVAL;
		goto out;
	} else if (len > MRVDRV_ETH_RX_PACKET_BUFFER_SIZE) {
		netdev_err(priv->dev,
			   "%s: error: card has %d bytes of data, but our maximum skb size is %zu\n",
			   __func__, len, MRVDRV_ETH_RX_PACKET_BUFFER_SIZE);
		err = -EINVAL;
		goto out;
	}

	/* TODO: should we allocate a smaller skb if we have less data? */
	skb = dev_alloc_skb(MRVDRV_ETH_RX_PACKET_BUFFER_SIZE);
	if (!skb) {
		err = -ENOBUFS;
		goto out;
	}
	skb_reserve(skb, IPFIELD_ALIGN_OFFSET);
	data = skb_put(skb, len);

	/* Read the data from the WLAN module into our skb... */
	err = spu_read(card, IF_SPI_DATA_RDWRPORT_REG, data, ALIGN(len, 4));
	if (err) {
		dev_kfree_skb(skb);
		goto out;
	}

	/* pass the SKB to libertas */
	err = lbs_process_rxed_packet(card->priv, skb);
	/* lbs_process_rxed_packet() consumes the skb */

out:
	if (err)
		netdev_err(priv->dev, "%s: err=%d\n", __func__, err);

	return err;
}

/* Move data or a command from the host to the card. */
static void if_spi_h2c(struct if_spi_card *card,
			struct if_spi_packet *packet, int type)
{
	struct lbs_private *priv = card->priv;
	int err = 0;
	u16 port_reg;

	switch (type) {
	case MVMS_DAT:
		port_reg = IF_SPI_DATA_RDWRPORT_REG;
		break;
	case MVMS_CMD:
		port_reg = IF_SPI_CMD_RDWRPORT_REG;
		break;
	default:
		netdev_err(priv->dev, "can't transfer buffer of type %d\n",
			   type);
		err = -EINVAL;
		goto out;
	}

	/* Write the data to the card */
	err = spu_write(card, port_reg, packet->buffer, packet->blen);
	if (err)
		goto out;

out:
	kfree(packet);

	if (err)
		netdev_err(priv->dev, "%s: error %d\n", __func__, err);
}

/* Inform the host about a card event */
static void if_spi_e2h(struct if_spi_card *card)
{
	int err = 0;
	u32 cause;
	struct lbs_private *priv = card->priv;

	err = spu_read_u32(card, IF_SPI_SCRATCH_3_REG, &cause);
	if (err)
		goto out;

	/* re-enable the card event interrupt */
	spu_write_u16(card, IF_SPI_HOST_INT_STATUS_REG,
			~IF_SPI_HICU_CARD_EVENT);

	/* generate a card interrupt */
	spu_write_u16(card, IF_SPI_CARD_INT_CAUSE_REG, IF_SPI_CIC_HOST_EVENT);

	lbs_queue_event(priv, cause & 0xff);
out:
	if (err)
		netdev_err(priv->dev, "%s: error %d\n", __func__, err);
}

static void if_spi_host_to_card_worker(struct work_struct *work)
{
	int err;
	struct if_spi_card *card;
	u16 hiStatus;
	unsigned long flags;
	struct if_spi_packet *packet;
	struct lbs_private *priv;

	card = container_of(work, struct if_spi_card, packet_work);
	priv = card->priv;

	/*
	 * Read the host interrupt status register to see what we
	 * can do.
	 */
	err = spu_read_u16(card, IF_SPI_HOST_INT_STATUS_REG,
				&hiStatus);
	if (err) {
		netdev_err(priv->dev, "I/O error\n");
		goto err;
	}

	if (hiStatus & IF_SPI_HIST_CMD_UPLOAD_RDY) {
		err = if_spi_c2h_cmd(card);
		if (err)
			goto err;
	}
	if (hiStatus & IF_SPI_HIST_RX_UPLOAD_RDY) {
		err = if_spi_c2h_data(card);
		if (err)
			goto err;
	}

	/*
	 * workaround: in PS mode, the card does not set the Command
	 * Download Ready bit, but it sets TX Download Ready.
	 */
	if (hiStatus & IF_SPI_HIST_CMD_DOWNLOAD_RDY ||
	   (card->priv->psstate != PS_STATE_FULL_POWER &&
	    (hiStatus & IF_SPI_HIST_TX_DOWNLOAD_RDY))) {
		/*
		 * This means two things. First of all,
		 * if there was a previous command sent, the card has
		 * successfully received it.
		 * Secondly, it is now ready to download another
		 * command.
		 */
		lbs_host_to_card_done(card->priv);

		/* Do we have any command packets from the host to send? */
		packet = NULL;
		spin_lock_irqsave(&card->buffer_lock, flags);
		if (!list_empty(&card->cmd_packet_list)) {
			packet = (struct if_spi_packet *)(card->
					cmd_packet_list.next);
			list_del(&packet->list);
		}
		spin_unlock_irqrestore(&card->buffer_lock, flags);

		if (packet)
			if_spi_h2c(card, packet, MVMS_CMD);
	}
	if (hiStatus & IF_SPI_HIST_TX_DOWNLOAD_RDY) {
		/* Do we have any data packets from the host to send? */
		packet = NULL;
		spin_lock_irqsave(&card->buffer_lock, flags);
		if (!list_empty(&card->data_packet_list)) {
			packet = (struct if_spi_packet *)(card->
					data_packet_list.next);
			list_del(&packet->list);
		}
		spin_unlock_irqrestore(&card->buffer_lock, flags);

		if (packet)
			if_spi_h2c(card, packet, MVMS_DAT);
	}
	if (hiStatus & IF_SPI_HIST_CARD_EVENT)
		if_spi_e2h(card);

err:
	if (err)
		netdev_err(priv->dev, "%s: got error %d\n", __func__, err);
}

/*
 * Host to Card
 *
 * Called from Libertas to transfer some data to the WLAN device
 * We can't sleep here.
 */
static int if_spi_host_to_card(struct lbs_private *priv,
				u8 type, u8 *buf, u16 nb)
{
	int err = 0;
	unsigned long flags;
	struct if_spi_card *card = priv->card;
	struct if_spi_packet *packet;
	u16 blen;

	if (nb == 0) {
		netdev_err(priv->dev, "%s: invalid size requested: %d\n",
			   __func__, nb);
		err = -EINVAL;
		goto out;
	}
	blen = ALIGN(nb, 4);
	packet = kzalloc(sizeof(struct if_spi_packet) + blen, GFP_ATOMIC);
	if (!packet) {
		err = -ENOMEM;
		goto out;
	}
	packet->blen = blen;
	memcpy(packet->buffer, buf, nb);
	memset(packet->buffer + nb, 0, blen - nb);

	switch (type) {
	case MVMS_CMD:
		priv->dnld_sent = DNLD_CMD_SENT;
		spin_lock_irqsave(&card->buffer_lock, flags);
		list_add_tail(&packet->list, &card->cmd_packet_list);
		spin_unlock_irqrestore(&card->buffer_lock, flags);
		break;
	case MVMS_DAT:
		priv->dnld_sent = DNLD_DATA_SENT;
		spin_lock_irqsave(&card->buffer_lock, flags);
		list_add_tail(&packet->list, &card->data_packet_list);
		spin_unlock_irqrestore(&card->buffer_lock, flags);
		break;
	default:
		kfree(packet);
		netdev_err(priv->dev, "can't transfer buffer of type %d\n",
			   type);
		err = -EINVAL;
		break;
	}

	/* Queue spi xfer work */
	queue_work(card->workqueue, &card->packet_work);
out:
	return err;
}

/*
 * Host Interrupts
 *
 * Service incoming interrupts from the WLAN device. We can't sleep here, so
 * don't try to talk on the SPI bus, just queue the SPI xfer work.
 */
static irqreturn_t if_spi_host_interrupt(int irq, void *dev_id)
{
	struct if_spi_card *card = dev_id;

	queue_work(card->workqueue, &card->packet_work);

	return IRQ_HANDLED;
}

/*
 * SPI callbacks
 */

static int if_spi_init_card(struct if_spi_card *card)
{
	struct lbs_private *priv = card->priv;
	int err, i;
	u32 scratch;
	const struct firmware *helper = NULL;
	const struct firmware *mainfw = NULL;

	err = spu_init(card, card->pdata->use_dummy_writes);
	if (err)
		goto out;
	err = spu_get_chip_revision(card, &card->card_id, &card->card_rev);
	if (err)
		goto out;

	err = spu_read_u32(card, IF_SPI_SCRATCH_4_REG, &scratch);
	if (err)
		goto out;
	if (scratch == SUCCESSFUL_FW_DOWNLOAD_MAGIC)
		lbs_deb_spi("Firmware is already loaded for "
			    "Marvell WLAN 802.11 adapter\n");
	else {
		/* Check if we support this card */
		for (i = 0; i < ARRAY_SIZE(fw_table); i++) {
			if (card->card_id == fw_table[i].model)
				break;
		}
		if (i == ARRAY_SIZE(fw_table)) {
			netdev_err(priv->dev, "Unsupported chip_id: 0x%02x\n",
				   card->card_id);
			err = -ENODEV;
			goto out;
		}

		err = lbs_get_firmware(&card->spi->dev, card->card_id,
					&fw_table[0], &helper, &mainfw);
		if (err) {
			netdev_err(priv->dev, "failed to find firmware (%d)\n",
				   err);
			goto out;
		}

		lbs_deb_spi("Initializing FW for Marvell WLAN 802.11 adapter "
				"(chip_id = 0x%04x, chip_rev = 0x%02x) "
				"attached to SPI bus_num %d, chip_select %d. "
				"spi->max_speed_hz=%d\n",
				card->card_id, card->card_rev,
				card->spi->master->bus_num,
				card->spi->chip_select,
				card->spi->max_speed_hz);
		err = if_spi_prog_helper_firmware(card, helper);
		if (err)
			goto out;
		err = if_spi_prog_main_firmware(card, mainfw);
		if (err)
			goto out;
		lbs_deb_spi("loaded FW for Marvell WLAN 802.11 adapter\n");
	}

	err = spu_set_interrupt_mode(card, 0, 1);
	if (err)
		goto out;

out:
	return err;
}

static void if_spi_resume_worker(struct work_struct *work)
{
	struct if_spi_card *card;

	card = container_of(work, struct if_spi_card, resume_work);

	if (card->suspended) {
		if (card->pdata->setup)
			card->pdata->setup(card->spi);

		/* Init card ... */
		if_spi_init_card(card);

		enable_irq(card->spi->irq);

		/* And resume it ... */
		lbs_resume(card->priv);

		card->suspended = 0;
	}
}

static int if_spi_probe(struct spi_device *spi)
{
	struct if_spi_card *card;
	struct lbs_private *priv = NULL;
	struct libertas_spi_platform_data *pdata = dev_get_platdata(&spi->dev);
	int err = 0;

	if (!pdata) {
		err = -EINVAL;
		goto out;
	}

	if (pdata->setup) {
		err = pdata->setup(spi);
		if (err)
			goto out;
	}

	/* Allocate card structure to represent this specific device */
	card = kzalloc(sizeof(struct if_spi_card), GFP_KERNEL);
	if (!card) {
		err = -ENOMEM;
		goto teardown;
	}
	spi_set_drvdata(spi, card);
	card->pdata = pdata;
	card->spi = spi;
	card->prev_xfer_time = jiffies;

	INIT_LIST_HEAD(&card->cmd_packet_list);
	INIT_LIST_HEAD(&card->data_packet_list);
	spin_lock_init(&card->buffer_lock);

	/* Initialize the SPI Interface Unit */

	/* Firmware load */
	err = if_spi_init_card(card);
	if (err)
		goto free_card;

	/*
	 * Register our card with libertas.
	 * This will call alloc_etherdev.
	 */
	priv = lbs_add_card(card, &spi->dev);
	if (IS_ERR(priv)) {
		err = PTR_ERR(priv);
		goto free_card;
	}
	card->priv = priv;
	priv->setup_fw_on_resume = 1;
	priv->card = card;
	priv->hw_host_to_card = if_spi_host_to_card;
	priv->enter_deep_sleep = NULL;
	priv->exit_deep_sleep = NULL;
	priv->reset_deep_sleep_wakeup = NULL;
	priv->fw_ready = 1;

	/* Initialize interrupt handling stuff. */
	card->workqueue = alloc_workqueue("libertas_spi", WQ_MEM_RECLAIM, 0);
	if (!card->workqueue) {
		err = -ENOMEM;
		goto remove_card;
	}
	INIT_WORK(&card->packet_work, if_spi_host_to_card_worker);
	INIT_WORK(&card->resume_work, if_spi_resume_worker);

	err = request_irq(spi->irq, if_spi_host_interrupt,
			IRQF_TRIGGER_FALLING, "libertas_spi", card);
	if (err) {
		pr_err("can't get host irq line-- request_irq failed\n");
		goto terminate_workqueue;
	}

	/*
	 * Start the card.
	 * This will call register_netdev, and we'll start
	 * getting interrupts...
	 */
	err = lbs_start_card(priv);
	if (err)
		goto release_irq;

	lbs_deb_spi("Finished initializing WLAN module.\n");

	/* successful exit */
	goto out;

release_irq:
	free_irq(spi->irq, card);
terminate_workqueue:
	destroy_workqueue(card->workqueue);
remove_card:
	lbs_remove_card(priv); /* will call free_netdev */
free_card:
	free_if_spi_card(card);
teardown:
	if (pdata->teardown)
		pdata->teardown(spi);
out:
	return err;
}

static int libertas_spi_remove(struct spi_device *spi)
{
	struct if_spi_card *card = spi_get_drvdata(spi);
	struct lbs_private *priv = card->priv;

	lbs_deb_spi("libertas_spi_remove\n");

	cancel_work_sync(&card->resume_work);

	lbs_stop_card(priv);
	lbs_remove_card(priv); /* will call free_netdev */

	free_irq(spi->irq, card);
	destroy_workqueue(card->workqueue);
	if (card->pdata->teardown)
		card->pdata->teardown(spi);
	free_if_spi_card(card);

	return 0;
}

static int if_spi_suspend(struct device *dev)
{
	struct spi_device *spi = to_spi_device(dev);
	struct if_spi_card *card = spi_get_drvdata(spi);

	if (!card->suspended) {
		lbs_suspend(card->priv);
		flush_workqueue(card->workqueue);
		disable_irq(spi->irq);

		if (card->pdata->teardown)
			card->pdata->teardown(spi);
		card->suspended = 1;
	}

	return 0;
}

static int if_spi_resume(struct device *dev)
{
	struct spi_device *spi = to_spi_device(dev);
	struct if_spi_card *card = spi_get_drvdata(spi);

	/* Schedule delayed work */
	schedule_work(&card->resume_work);

	return 0;
}

static const struct dev_pm_ops if_spi_pm_ops = {
	.suspend	= if_spi_suspend,
	.resume		= if_spi_resume,
};

static struct spi_driver libertas_spi_driver = {
	.probe	= if_spi_probe,
	.remove = libertas_spi_remove,
	.driver = {
		.name	= "libertas_spi",
		.pm	= &if_spi_pm_ops,
	},
};

/*
 * Module functions
 */

static int __init if_spi_init_module(void)
{
	int ret = 0;

	printk(KERN_INFO "libertas_spi: Libertas SPI driver\n");
	ret = spi_register_driver(&libertas_spi_driver);

	return ret;
}

static void __exit if_spi_exit_module(void)
{
	spi_unregister_driver(&libertas_spi_driver);
}

module_init(if_spi_init_module);
module_exit(if_spi_exit_module);

MODULE_DESCRIPTION("Libertas SPI WLAN Driver");
MODULE_AUTHOR("Andrey Yurovsky <andrey@cozybit.com>, "
	      "Colin McCabe <colin@cozybit.com>");
MODULE_LICENSE("GPL");
MODULE_ALIAS("spi:libertas_spi");