Google Git
Sign in
android-kvm / linux / 72641d8d60401a5f1e1a0431ceaf928680d34418 / . / kernel / kcsan / core.c
blob: 4b84c8e7884b4806e05c9eddc42a19c8dccbd5e5 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/*
* KCSAN core runtime.
*
* Copyright (C) 2019, Google LLC.
*/
#define pr_fmt(fmt) "kcsan: " fmt
#include <linux/atomic.h>
#include <linux/bug.h>
#include <linux/delay.h>
#include <linux/export.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/moduleparam.h>
#include <linux/percpu.h>
#include <linux/preempt.h>
#include <linux/sched.h>
#include <linux/uaccess.h>
#include "encoding.h"
#include "kcsan.h"
#include "permissive.h"
static bool kcsan_early_enable = IS_ENABLED(CONFIG_KCSAN_EARLY_ENABLE);
unsigned int kcsan_udelay_task = CONFIG_KCSAN_UDELAY_TASK;
unsigned int kcsan_udelay_interrupt = CONFIG_KCSAN_UDELAY_INTERRUPT;
static long kcsan_skip_watch = CONFIG_KCSAN_SKIP_WATCH;
static bool kcsan_interrupt_watcher = IS_ENABLED(CONFIG_KCSAN_INTERRUPT_WATCHER);
#ifdef MODULE_PARAM_PREFIX
#undef MODULE_PARAM_PREFIX
#endif
#define MODULE_PARAM_PREFIX "kcsan."
module_param_named(early_enable, kcsan_early_enable, bool, 0);
module_param_named(udelay_task, kcsan_udelay_task, uint, 0644);
module_param_named(udelay_interrupt, kcsan_udelay_interrupt, uint, 0644);
module_param_named(skip_watch, kcsan_skip_watch, long, 0644);
module_param_named(interrupt_watcher, kcsan_interrupt_watcher, bool, 0444);
bool kcsan_enabled;
/* Per-CPU kcsan_ctx for interrupts */
static DEFINE_PER_CPU(struct kcsan_ctx, kcsan_cpu_ctx) = {
.disable_count = 0,
.atomic_next = 0,
.atomic_nest_count = 0,
.in_flat_atomic = false,
.access_mask = 0,
.scoped_accesses = {LIST_POISON1, NULL},
};
/*
* Helper macros to index into adjacent slots, starting from address slot
* itself, followed by the right and left slots.
*
* The purpose is 2-fold:
*
* 1. if during insertion the address slot is already occupied, check if
* any adjacent slots are free;
* 2. accesses that straddle a slot boundary due to size that exceeds a
* slot's range may check adjacent slots if any watchpoint matches.
*
* Note that accesses with very large size may still miss a watchpoint; however,
* given this should be rare, this is a reasonable trade-off to make, since this
* will avoid:
*
* 1. excessive contention between watchpoint checks and setup;
* 2. larger number of simultaneous watchpoints without sacrificing
* performance.
*
* Example: SLOT_IDX values for KCSAN_CHECK_ADJACENT=1, where i is [0, 1, 2]:
*
* slot=0: [ 1, 2, 0]
* slot=9: [10, 11, 9]
* slot=63: [64, 65, 63]
*/
#define SLOT_IDX(slot, i) (slot + ((i + KCSAN_CHECK_ADJACENT) % NUM_SLOTS))
/*
* SLOT_IDX_FAST is used in the fast-path. Not first checking the address's primary
* slot (middle) is fine if we assume that races occur rarely. The set of
* indices {SLOT_IDX(slot, i) | i in [0, NUM_SLOTS)} is equivalent to
* {SLOT_IDX_FAST(slot, i) | i in [0, NUM_SLOTS)}.
*/
#define SLOT_IDX_FAST(slot, i) (slot + i)
/*
* Watchpoints, with each entry encoded as defined in encoding.h: in order to be
* able to safely update and access a watchpoint without introducing locking
* overhead, we encode each watchpoint as a single atomic long. The initial
* zero-initialized state matches INVALID_WATCHPOINT.
*
* Add NUM_SLOTS-1 entries to account for overflow; this helps avoid having to
* use more complicated SLOT_IDX_FAST calculation with modulo in the fast-path.
*/
static atomic_long_t watchpoints[CONFIG_KCSAN_NUM_WATCHPOINTS + NUM_SLOTS-1];
/*
* Instructions to skip watching counter, used in should_watch(). We use a
* per-CPU counter to avoid excessive contention.
*/
static DEFINE_PER_CPU(long, kcsan_skip);
/* For kcsan_prandom_u32_max(). */
static DEFINE_PER_CPU(u32, kcsan_rand_state);
static __always_inline atomic_long_t *find_watchpoint(unsigned long addr,
size_t size,
bool expect_write,
long *encoded_watchpoint)
{
const int slot = watchpoint_slot(addr);
const unsigned long addr_masked = addr & WATCHPOINT_ADDR_MASK;
atomic_long_t *watchpoint;
unsigned long wp_addr_masked;
size_t wp_size;
bool is_write;
int i;
BUILD_BUG_ON(CONFIG_KCSAN_NUM_WATCHPOINTS < NUM_SLOTS);
for (i = 0; i < NUM_SLOTS; ++i) {
watchpoint = &watchpoints[SLOT_IDX_FAST(slot, i)];
*encoded_watchpoint = atomic_long_read(watchpoint);
if (!decode_watchpoint(*encoded_watchpoint, &wp_addr_masked,
&wp_size, &is_write))
continue;
if (expect_write && !is_write)
continue;
/* Check if the watchpoint matches the access. */
if (matching_access(wp_addr_masked, wp_size, addr_masked, size))
return watchpoint;
}
return NULL;
}
static inline atomic_long_t *
insert_watchpoint(unsigned long addr, size_t size, bool is_write)
{
const int slot = watchpoint_slot(addr);
const long encoded_watchpoint = encode_watchpoint(addr, size, is_write);
atomic_long_t *watchpoint;
int i;
/* Check slot index logic, ensuring we stay within array bounds. */
BUILD_BUG_ON(SLOT_IDX(0, 0) != KCSAN_CHECK_ADJACENT);
BUILD_BUG_ON(SLOT_IDX(0, KCSAN_CHECK_ADJACENT+1) != 0);
BUILD_BUG_ON(SLOT_IDX(CONFIG_KCSAN_NUM_WATCHPOINTS-1, KCSAN_CHECK_ADJACENT) != ARRAY_SIZE(watchpoints)-1);
BUILD_BUG_ON(SLOT_IDX(CONFIG_KCSAN_NUM_WATCHPOINTS-1, KCSAN_CHECK_ADJACENT+1) != ARRAY_SIZE(watchpoints) - NUM_SLOTS);
for (i = 0; i < NUM_SLOTS; ++i) {
long expect_val = INVALID_WATCHPOINT;
/* Try to acquire this slot. */
watchpoint = &watchpoints[SLOT_IDX(slot, i)];
if (atomic_long_try_cmpxchg_relaxed(watchpoint, &expect_val, encoded_watchpoint))
return watchpoint;
}
return NULL;
}
/*
* Return true if watchpoint was successfully consumed, false otherwise.
*
* This may return false if:
*
* 1. another thread already consumed the watchpoint;
* 2. the thread that set up the watchpoint already removed it;
* 3. the watchpoint was removed and then re-used.
*/
static __always_inline bool
try_consume_watchpoint(atomic_long_t *watchpoint, long encoded_watchpoint)
{
return atomic_long_try_cmpxchg_relaxed(watchpoint, &encoded_watchpoint, CONSUMED_WATCHPOINT);
}
/* Return true if watchpoint was not touched, false if already consumed. */
static inline bool consume_watchpoint(atomic_long_t *watchpoint)
{
return atomic_long_xchg_relaxed(watchpoint, CONSUMED_WATCHPOINT) != CONSUMED_WATCHPOINT;
}
/* Remove the watchpoint -- its slot may be reused after. */
static inline void remove_watchpoint(atomic_long_t *watchpoint)
{
atomic_long_set(watchpoint, INVALID_WATCHPOINT);
}
static __always_inline struct kcsan_ctx *get_ctx(void)
{
/*
* In interrupts, use raw_cpu_ptr to avoid unnecessary checks, that would
* also result in calls that generate warnings in uaccess regions.
*/
return in_task() ? &current->kcsan_ctx : raw_cpu_ptr(&kcsan_cpu_ctx);
}
static __always_inline void
check_access(const volatile void *ptr, size_t size, int type, unsigned long ip);
/* Check scoped accesses; never inline because this is a slow-path! */
static noinline void kcsan_check_scoped_accesses(void)
{
struct kcsan_ctx *ctx = get_ctx();
struct list_head *prev_save = ctx->scoped_accesses.prev;
struct kcsan_scoped_access *scoped_access;
ctx->scoped_accesses.prev = NULL; /* Avoid recursion. */
list_for_each_entry(scoped_access, &ctx->scoped_accesses, list) {
check_access(scoped_access->ptr, scoped_access->size,
scoped_access->type, scoped_access->ip);
}
ctx->scoped_accesses.prev = prev_save;
}
/* Rules for generic atomic accesses. Called from fast-path. */
static __always_inline bool
is_atomic(struct kcsan_ctx *ctx, const volatile void *ptr, size_t size, int type)
{
if (type & KCSAN_ACCESS_ATOMIC)
return true;
/*
* Unless explicitly declared atomic, never consider an assertion access
* as atomic. This allows using them also in atomic regions, such as
* seqlocks, without implicitly changing their semantics.
*/
if (type & KCSAN_ACCESS_ASSERT)
return false;
if (IS_ENABLED(CONFIG_KCSAN_ASSUME_PLAIN_WRITES_ATOMIC) &&
(type & KCSAN_ACCESS_WRITE) && size <= sizeof(long) &&
!(type & KCSAN_ACCESS_COMPOUND) && IS_ALIGNED((unsigned long)ptr, size))
return true; /* Assume aligned writes up to word size are atomic. */
if (ctx->atomic_next > 0) {
/*
* Because we do not have separate contexts for nested
* interrupts, in case atomic_next is set, we simply assume that
* the outer interrupt set atomic_next. In the worst case, we
* will conservatively consider operations as atomic. This is a
* reasonable trade-off to make, since this case should be
* extremely rare; however, even if extremely rare, it could
* lead to false positives otherwise.
*/
if ((hardirq_count() >> HARDIRQ_SHIFT) < 2)
--ctx->atomic_next; /* in task, or outer interrupt */
return true;
}
return ctx->atomic_nest_count > 0 || ctx->in_flat_atomic;
}
static __always_inline bool
should_watch(struct kcsan_ctx *ctx, const volatile void *ptr, size_t size, int type)
{
/*
* Never set up watchpoints when memory operations are atomic.
*
* Need to check this first, before kcsan_skip check below: (1) atomics
* should not count towards skipped instructions, and (2) to actually
* decrement kcsan_atomic_next for consecutive instruction stream.
*/
if (is_atomic(ctx, ptr, size, type))
return false;
if (this_cpu_dec_return(kcsan_skip) >= 0)
return false;
/*
* NOTE: If we get here, kcsan_skip must always be reset in slow path
* via reset_kcsan_skip() to avoid underflow.
*/
/* this operation should be watched */
return true;
}
/*
* Returns a pseudo-random number in interval [0, ep_ro). Simple linear
* congruential generator, using constants from "Numerical Recipes".
*/
static u32 kcsan_prandom_u32_max(u32 ep_ro)
{
u32 state = this_cpu_read(kcsan_rand_state);
state = 1664525 * state + 1013904223;
this_cpu_write(kcsan_rand_state, state);
return state % ep_ro;
}
static inline void reset_kcsan_skip(void)
{
long skip_count = kcsan_skip_watch -
(IS_ENABLED(CONFIG_KCSAN_SKIP_WATCH_RANDOMIZE) ?
kcsan_prandom_u32_max(kcsan_skip_watch) :
0);
this_cpu_write(kcsan_skip, skip_count);
}
static __always_inline bool kcsan_is_enabled(struct kcsan_ctx *ctx)
{
return READ_ONCE(kcsan_enabled) && !ctx->disable_count;
}
/* Introduce delay depending on context and configuration. */
static void delay_access(int type)
{
unsigned int delay = in_task() ? kcsan_udelay_task : kcsan_udelay_interrupt;
/* For certain access types, skew the random delay to be longer. */
unsigned int skew_delay_order =
(type & (KCSAN_ACCESS_COMPOUND | KCSAN_ACCESS_ASSERT)) ? 1 : 0;
delay -= IS_ENABLED(CONFIG_KCSAN_DELAY_RANDOMIZE) ?
kcsan_prandom_u32_max(delay >> skew_delay_order) :
0;
udelay(delay);
}
void kcsan_save_irqtrace(struct task_struct *task)
{
#ifdef CONFIG_TRACE_IRQFLAGS
task->kcsan_save_irqtrace = task->irqtrace;
#endif
}
void kcsan_restore_irqtrace(struct task_struct *task)
{
#ifdef CONFIG_TRACE_IRQFLAGS
task->irqtrace = task->kcsan_save_irqtrace;
#endif
}
/*
* Pull everything together: check_access() below contains the performance
* critical operations; the fast-path (including check_access) functions should
* all be inlinable by the instrumentation functions.
*
* The slow-path (kcsan_found_watchpoint, kcsan_setup_watchpoint) are
* non-inlinable -- note that, we prefix these with "kcsan_" to ensure they can
* be filtered from the stacktrace, as well as give them unique names for the
* UACCESS whitelist of objtool. Each function uses user_access_save/restore(),
* since they do not access any user memory, but instrumentation is still
* emitted in UACCESS regions.
*/
static noinline void kcsan_found_watchpoint(const volatile void *ptr,
size_t size,
int type,
unsigned long ip,
atomic_long_t *watchpoint,
long encoded_watchpoint)
{
const bool is_assert = (type & KCSAN_ACCESS_ASSERT) != 0;
struct kcsan_ctx *ctx = get_ctx();
unsigned long flags;
bool consumed;
/*
* We know a watchpoint exists. Let's try to keep the race-window
* between here and finally consuming the watchpoint below as small as
* possible -- avoid unneccessarily complex code until consumed.
*/
if (!kcsan_is_enabled(ctx))
return;
/*
* The access_mask check relies on value-change comparison. To avoid
* reporting a race where e.g. the writer set up the watchpoint, but the
* reader has access_mask!=0, we have to ignore the found watchpoint.
*/
if (ctx->access_mask)
return;
/*
* If the other thread does not want to ignore the access, and there was
* a value change as a result of this thread's operation, we will still
* generate a report of unknown origin.
*
* Use CONFIG_KCSAN_REPORT_RACE_UNKNOWN_ORIGIN=n to filter.
*/
if (!is_assert && kcsan_ignore_address(ptr))
return;
/*
* Consuming the watchpoint must be guarded by kcsan_is_enabled() to
* avoid erroneously triggering reports if the context is disabled.
*/
consumed = try_consume_watchpoint(watchpoint, encoded_watchpoint);
/* keep this after try_consume_watchpoint */
flags = user_access_save();
if (consumed) {
kcsan_save_irqtrace(current);
kcsan_report_set_info(ptr, size, type, ip, watchpoint - watchpoints);
kcsan_restore_irqtrace(current);
} else {
/*
* The other thread may not print any diagnostics, as it has
* already removed the watchpoint, or another thread consumed
* the watchpoint before this thread.
*/
atomic_long_inc(&kcsan_counters[KCSAN_COUNTER_REPORT_RACES]);
}
if (is_assert)
atomic_long_inc(&kcsan_counters[KCSAN_COUNTER_ASSERT_FAILURES]);
else
atomic_long_inc(&kcsan_counters[KCSAN_COUNTER_DATA_RACES]);
user_access_restore(flags);
}
static noinline void
kcsan_setup_watchpoint(const volatile void *ptr, size_t size, int type, unsigned long ip)
{
const bool is_write = (type & KCSAN_ACCESS_WRITE) != 0;
const bool is_assert = (type & KCSAN_ACCESS_ASSERT) != 0;
atomic_long_t *watchpoint;
u64 old, new, diff;
unsigned long access_mask;
enum kcsan_value_change value_change = KCSAN_VALUE_CHANGE_MAYBE;
unsigned long ua_flags = user_access_save();
struct kcsan_ctx *ctx = get_ctx();
unsigned long irq_flags = 0;
/*
* Always reset kcsan_skip counter in slow-path to avoid underflow; see
* should_watch().
*/
reset_kcsan_skip();
if (!kcsan_is_enabled(ctx))
goto out;
/*
* Check to-ignore addresses after kcsan_is_enabled(), as we may access
* memory that is not yet initialized during early boot.
*/
if (!is_assert && kcsan_ignore_address(ptr))
goto out;
if (!check_encodable((unsigned long)ptr, size)) {
atomic_long_inc(&kcsan_counters[KCSAN_COUNTER_UNENCODABLE_ACCESSES]);
goto out;
}
/*
* Save and restore the IRQ state trace touched by KCSAN, since KCSAN's
* runtime is entered for every memory access, and potentially useful
* information is lost if dirtied by KCSAN.
*/
kcsan_save_irqtrace(current);
if (!kcsan_interrupt_watcher)
local_irq_save(irq_flags);
watchpoint = insert_watchpoint((unsigned long)ptr, size, is_write);
if (watchpoint == NULL) {
/*
* Out of capacity: the size of 'watchpoints', and the frequency
* with which should_watch() returns true should be tweaked so
* that this case happens very rarely.
*/
atomic_long_inc(&kcsan_counters[KCSAN_COUNTER_NO_CAPACITY]);
goto out_unlock;
}
atomic_long_inc(&kcsan_counters[KCSAN_COUNTER_SETUP_WATCHPOINTS]);
atomic_long_inc(&kcsan_counters[KCSAN_COUNTER_USED_WATCHPOINTS]);
/*
* Read the current value, to later check and infer a race if the data
* was modified via a non-instrumented access, e.g. from a device.
*/
old = 0;
switch (size) {
case 1:
old = READ_ONCE(*(const u8 *)ptr);
break;
case 2:
old = READ_ONCE(*(const u16 *)ptr);
break;
case 4:
old = READ_ONCE(*(const u32 *)ptr);
break;
case 8:
old = READ_ONCE(*(const u64 *)ptr);
break;
default:
break; /* ignore; we do not diff the values */
}
/*
* Delay this thread, to increase probability of observing a racy
* conflicting access.
*/
delay_access(type);
/*
* Re-read value, and check if it is as expected; if not, we infer a
* racy access.
*/
access_mask = ctx->access_mask;
new = 0;
switch (size) {
case 1:
new = READ_ONCE(*(const u8 *)ptr);
break;
case 2:
new = READ_ONCE(*(const u16 *)ptr);
break;
case 4:
new = READ_ONCE(*(const u32 *)ptr);
break;
case 8:
new = READ_ONCE(*(const u64 *)ptr);
break;
default:
break; /* ignore; we do not diff the values */
}
diff = old ^ new;
if (access_mask)
diff &= access_mask;
/*
* Check if we observed a value change.
*
* Also check if the data race should be ignored (the rules depend on
* non-zero diff); if it is to be ignored, the below rules for
* KCSAN_VALUE_CHANGE_MAYBE apply.
*/
if (diff && !kcsan_ignore_data_race(size, type, old, new, diff))
value_change = KCSAN_VALUE_CHANGE_TRUE;
/* Check if this access raced with another. */
if (!consume_watchpoint(watchpoint)) {
/*
* Depending on the access type, map a value_change of MAYBE to
* TRUE (always report) or FALSE (never report).
*/
if (value_change == KCSAN_VALUE_CHANGE_MAYBE) {
if (access_mask != 0) {
/*
* For access with access_mask, we require a
* value-change, as it is likely that races on
* ~access_mask bits are expected.
*/
value_change = KCSAN_VALUE_CHANGE_FALSE;
} else if (size > 8 || is_assert) {
/* Always assume a value-change. */
value_change = KCSAN_VALUE_CHANGE_TRUE;
}
}
/*
* No need to increment 'data_races' counter, as the racing
* thread already did.
*
* Count 'assert_failures' for each failed ASSERT access,
* therefore both this thread and the racing thread may
* increment this counter.
*/
if (is_assert && value_change == KCSAN_VALUE_CHANGE_TRUE)
atomic_long_inc(&kcsan_counters[KCSAN_COUNTER_ASSERT_FAILURES]);
kcsan_report_known_origin(ptr, size, type, ip,
value_change, watchpoint - watchpoints,
old, new, access_mask);
} else if (value_change == KCSAN_VALUE_CHANGE_TRUE) {
/* Inferring a race, since the value should not have changed. */
atomic_long_inc(&kcsan_counters[KCSAN_COUNTER_RACES_UNKNOWN_ORIGIN]);
if (is_assert)
atomic_long_inc(&kcsan_counters[KCSAN_COUNTER_ASSERT_FAILURES]);
if (IS_ENABLED(CONFIG_KCSAN_REPORT_RACE_UNKNOWN_ORIGIN) || is_assert) {
kcsan_report_unknown_origin(ptr, size, type, ip,
old, new, access_mask);
}
}
/*
* Remove watchpoint; must be after reporting, since the slot may be
* reused after this point.
*/
remove_watchpoint(watchpoint);
atomic_long_dec(&kcsan_counters[KCSAN_COUNTER_USED_WATCHPOINTS]);
out_unlock:
if (!kcsan_interrupt_watcher)
local_irq_restore(irq_flags);
kcsan_restore_irqtrace(current);
out:
user_access_restore(ua_flags);
}
static __always_inline void
check_access(const volatile void *ptr, size_t size, int type, unsigned long ip)
{
const bool is_write = (type & KCSAN_ACCESS_WRITE) != 0;
atomic_long_t *watchpoint;
long encoded_watchpoint;
/*
* Do nothing for 0 sized check; this comparison will be optimized out
* for constant sized instrumentation (__tsan_{read,write}N).
*/
if (unlikely(size == 0))
return;
/*
* Avoid user_access_save in fast-path: find_watchpoint is safe without
* user_access_save, as the address that ptr points to is only used to
* check if a watchpoint exists; ptr is never dereferenced.
*/
watchpoint = find_watchpoint((unsigned long)ptr, size, !is_write,
&encoded_watchpoint);
/*
* It is safe to check kcsan_is_enabled() after find_watchpoint in the
* slow-path, as long as no state changes that cause a race to be
* detected and reported have occurred until kcsan_is_enabled() is
* checked.
*/
if (unlikely(watchpoint != NULL))
kcsan_found_watchpoint(ptr, size, type, ip, watchpoint, encoded_watchpoint);
else {
struct kcsan_ctx *ctx = get_ctx(); /* Call only once in fast-path. */
if (unlikely(should_watch(ctx, ptr, size, type)))
kcsan_setup_watchpoint(ptr, size, type, ip);
else if (unlikely(ctx->scoped_accesses.prev))
kcsan_check_scoped_accesses();
}
}
/* === Public interface ===================================================== */
void __init kcsan_init(void)
{
int cpu;
BUG_ON(!in_task());
for_each_possible_cpu(cpu)
per_cpu(kcsan_rand_state, cpu) = (u32)get_cycles();
/*
* We are in the init task, and no other tasks should be running;
* WRITE_ONCE without memory barrier is sufficient.
*/
if (kcsan_early_enable) {
pr_info("enabled early\n");
WRITE_ONCE(kcsan_enabled, true);
}
if (IS_ENABLED(CONFIG_KCSAN_REPORT_VALUE_CHANGE_ONLY) ||
IS_ENABLED(CONFIG_KCSAN_ASSUME_PLAIN_WRITES_ATOMIC) ||
IS_ENABLED(CONFIG_KCSAN_PERMISSIVE) ||
IS_ENABLED(CONFIG_KCSAN_IGNORE_ATOMICS)) {
pr_warn("non-strict mode configured - use CONFIG_KCSAN_STRICT=y to see all data races\n");
} else {
pr_info("strict mode configured\n");
}
}
/* === Exported interface =================================================== */
void kcsan_disable_current(void)
{
++get_ctx()->disable_count;
}
EXPORT_SYMBOL(kcsan_disable_current);
void kcsan_enable_current(void)
{
if (get_ctx()->disable_count-- == 0) {
/*
* Warn if kcsan_enable_current() calls are unbalanced with
* kcsan_disable_current() calls, which causes disable_count to
* become negative and should not happen.
*/
kcsan_disable_current(); /* restore to 0, KCSAN still enabled */
kcsan_disable_current(); /* disable to generate warning */
WARN(1, "Unbalanced %s()", __func__);
kcsan_enable_current();
}
}
EXPORT_SYMBOL(kcsan_enable_current);
void kcsan_enable_current_nowarn(void)
{
if (get_ctx()->disable_count-- == 0)
kcsan_disable_current();
}
EXPORT_SYMBOL(kcsan_enable_current_nowarn);
void kcsan_nestable_atomic_begin(void)
{
/*
* Do *not* check and warn if we are in a flat atomic region: nestable
* and flat atomic regions are independent from each other.
* See include/linux/kcsan.h: struct kcsan_ctx comments for more
* comments.
*/
++get_ctx()->atomic_nest_count;
}
EXPORT_SYMBOL(kcsan_nestable_atomic_begin);
void kcsan_nestable_atomic_end(void)
{
if (get_ctx()->atomic_nest_count-- == 0) {
/*
* Warn if kcsan_nestable_atomic_end() calls are unbalanced with
* kcsan_nestable_atomic_begin() calls, which causes
* atomic_nest_count to become negative and should not happen.
*/
kcsan_nestable_atomic_begin(); /* restore to 0 */
kcsan_disable_current(); /* disable to generate warning */
WARN(1, "Unbalanced %s()", __func__);
kcsan_enable_current();
}
}
EXPORT_SYMBOL(kcsan_nestable_atomic_end);
void kcsan_flat_atomic_begin(void)
{
get_ctx()->in_flat_atomic = true;
}
EXPORT_SYMBOL(kcsan_flat_atomic_begin);
void kcsan_flat_atomic_end(void)
{
get_ctx()->in_flat_atomic = false;
}
EXPORT_SYMBOL(kcsan_flat_atomic_end);
void kcsan_atomic_next(int n)
{
get_ctx()->atomic_next = n;
}
EXPORT_SYMBOL(kcsan_atomic_next);
void kcsan_set_access_mask(unsigned long mask)
{
get_ctx()->access_mask = mask;
}
EXPORT_SYMBOL(kcsan_set_access_mask);
struct kcsan_scoped_access *
kcsan_begin_scoped_access(const volatile void *ptr, size_t size, int type,
struct kcsan_scoped_access *sa)
{
struct kcsan_ctx *ctx = get_ctx();
check_access(ptr, size, type, _RET_IP_);
ctx->disable_count++; /* Disable KCSAN, in case list debugging is on. */
INIT_LIST_HEAD(&sa->list);
sa->ptr = ptr;
sa->size = size;
sa->type = type;
sa->ip = _RET_IP_;
if (!ctx->scoped_accesses.prev) /* Lazy initialize list head. */
INIT_LIST_HEAD(&ctx->scoped_accesses);
list_add(&sa->list, &ctx->scoped_accesses);
ctx->disable_count--;
return sa;
}
EXPORT_SYMBOL(kcsan_begin_scoped_access);
void kcsan_end_scoped_access(struct kcsan_scoped_access *sa)
{
struct kcsan_ctx *ctx = get_ctx();
if (WARN(!ctx->scoped_accesses.prev, "Unbalanced %s()?", __func__))
return;
ctx->disable_count++; /* Disable KCSAN, in case list debugging is on. */
list_del(&sa->list);
if (list_empty(&ctx->scoped_accesses))
/*
* Ensure we do not enter kcsan_check_scoped_accesses()
* slow-path if unnecessary, and avoids requiring list_empty()
* in the fast-path (to avoid a READ_ONCE() and potential
* uaccess warning).
*/
ctx->scoped_accesses.prev = NULL;
ctx->disable_count--;
check_access(sa->ptr, sa->size, sa->type, sa->ip);
}
EXPORT_SYMBOL(kcsan_end_scoped_access);
void __kcsan_check_access(const volatile void *ptr, size_t size, int type)
{
check_access(ptr, size, type, _RET_IP_);
}
EXPORT_SYMBOL(__kcsan_check_access);
/*
* KCSAN uses the same instrumentation that is emitted by supported compilers
* for ThreadSanitizer (TSAN).
*
* When enabled, the compiler emits instrumentation calls (the functions
* prefixed with "__tsan" below) for all loads and stores that it generated;
* inline asm is not instrumented.
*
* Note that, not all supported compiler versions distinguish aligned/unaligned
* accesses, but e.g. recent versions of Clang do. We simply alias the unaligned
* version to the generic version, which can handle both.
*/
#define DEFINE_TSAN_READ_WRITE(size) \
void __tsan_read##size(void *ptr); \
void __tsan_read##size(void *ptr) \
{ \
check_access(ptr, size, 0, _RET_IP_); \
} \
EXPORT_SYMBOL(__tsan_read##size); \
void __tsan_unaligned_read##size(void *ptr) \
__alias(__tsan_read##size); \
EXPORT_SYMBOL(__tsan_unaligned_read##size); \
void __tsan_write##size(void *ptr); \
void __tsan_write##size(void *ptr) \
{ \
check_access(ptr, size, KCSAN_ACCESS_WRITE, _RET_IP_); \
} \
EXPORT_SYMBOL(__tsan_write##size); \
void __tsan_unaligned_write##size(void *ptr) \
__alias(__tsan_write##size); \
EXPORT_SYMBOL(__tsan_unaligned_write##size); \
void __tsan_read_write##size(void *ptr); \
void __tsan_read_write##size(void *ptr) \
{ \
check_access(ptr, size, \
KCSAN_ACCESS_COMPOUND | KCSAN_ACCESS_WRITE, \
_RET_IP_); \
} \
EXPORT_SYMBOL(__tsan_read_write##size); \
void __tsan_unaligned_read_write##size(void *ptr) \
__alias(__tsan_read_write##size); \
EXPORT_SYMBOL(__tsan_unaligned_read_write##size)
DEFINE_TSAN_READ_WRITE(1);
DEFINE_TSAN_READ_WRITE(2);
DEFINE_TSAN_READ_WRITE(4);
DEFINE_TSAN_READ_WRITE(8);
DEFINE_TSAN_READ_WRITE(16);
void __tsan_read_range(void *ptr, size_t size);
void __tsan_read_range(void *ptr, size_t size)
{
check_access(ptr, size, 0, _RET_IP_);
}
EXPORT_SYMBOL(__tsan_read_range);
void __tsan_write_range(void *ptr, size_t size);
void __tsan_write_range(void *ptr, size_t size)
{
check_access(ptr, size, KCSAN_ACCESS_WRITE, _RET_IP_);
}
EXPORT_SYMBOL(__tsan_write_range);
/*
* Use of explicit volatile is generally disallowed [1], however, volatile is
* still used in various concurrent context, whether in low-level
* synchronization primitives or for legacy reasons.
* [1] https://lwn.net/Articles/233479/
*
* We only consider volatile accesses atomic if they are aligned and would pass
* the size-check of compiletime_assert_rwonce_type().
*/
#define DEFINE_TSAN_VOLATILE_READ_WRITE(size) \
void __tsan_volatile_read##size(void *ptr); \
void __tsan_volatile_read##size(void *ptr) \
{ \
const bool is_atomic = size <= sizeof(long long) && \
IS_ALIGNED((unsigned long)ptr, size); \
if (IS_ENABLED(CONFIG_KCSAN_IGNORE_ATOMICS) && is_atomic) \
return; \
check_access(ptr, size, is_atomic ? KCSAN_ACCESS_ATOMIC : 0, \
_RET_IP_); \
} \
EXPORT_SYMBOL(__tsan_volatile_read##size); \
void __tsan_unaligned_volatile_read##size(void *ptr) \
__alias(__tsan_volatile_read##size); \
EXPORT_SYMBOL(__tsan_unaligned_volatile_read##size); \
void __tsan_volatile_write##size(void *ptr); \
void __tsan_volatile_write##size(void *ptr) \
{ \
const bool is_atomic = size <= sizeof(long long) && \
IS_ALIGNED((unsigned long)ptr, size); \
if (IS_ENABLED(CONFIG_KCSAN_IGNORE_ATOMICS) && is_atomic) \
return; \
check_access(ptr, size, \
KCSAN_ACCESS_WRITE | \
(is_atomic ? KCSAN_ACCESS_ATOMIC : 0), \
_RET_IP_); \
} \
EXPORT_SYMBOL(__tsan_volatile_write##size); \
void __tsan_unaligned_volatile_write##size(void *ptr) \
__alias(__tsan_volatile_write##size); \
EXPORT_SYMBOL(__tsan_unaligned_volatile_write##size)
DEFINE_TSAN_VOLATILE_READ_WRITE(1);
DEFINE_TSAN_VOLATILE_READ_WRITE(2);
DEFINE_TSAN_VOLATILE_READ_WRITE(4);
DEFINE_TSAN_VOLATILE_READ_WRITE(8);
DEFINE_TSAN_VOLATILE_READ_WRITE(16);
/*
* The below are not required by KCSAN, but can still be emitted by the
* compiler.
*/
void __tsan_func_entry(void *call_pc);
void __tsan_func_entry(void *call_pc)
{
}
EXPORT_SYMBOL(__tsan_func_entry);
void __tsan_func_exit(void);
void __tsan_func_exit(void)
{
}
EXPORT_SYMBOL(__tsan_func_exit);
void __tsan_init(void);
void __tsan_init(void)
{
}
EXPORT_SYMBOL(__tsan_init);
/*
* Instrumentation for atomic builtins (__atomic_*, __sync_*).
*
* Normal kernel code _should not_ be using them directly, but some
* architectures may implement some or all atomics using the compilers'
* builtins.
*
* Note: If an architecture decides to fully implement atomics using the
* builtins, because they are implicitly instrumented by KCSAN (and KASAN,
* etc.), implementing the ARCH_ATOMIC interface (to get instrumentation via
* atomic-instrumented) is no longer necessary.
*
* TSAN instrumentation replaces atomic accesses with calls to any of the below
* functions, whose job is to also execute the operation itself.
*/
#define DEFINE_TSAN_ATOMIC_LOAD_STORE(bits) \
u##bits __tsan_atomic##bits##_load(const u##bits *ptr, int memorder); \
u##bits __tsan_atomic##bits##_load(const u##bits *ptr, int memorder) \
{ \
if (!IS_ENABLED(CONFIG_KCSAN_IGNORE_ATOMICS)) { \
check_access(ptr, bits / BITS_PER_BYTE, KCSAN_ACCESS_ATOMIC, _RET_IP_); \
} \
return __atomic_load_n(ptr, memorder); \
} \
EXPORT_SYMBOL(__tsan_atomic##bits##_load); \
void __tsan_atomic##bits##_store(u##bits *ptr, u##bits v, int memorder); \
void __tsan_atomic##bits##_store(u##bits *ptr, u##bits v, int memorder) \
{ \
if (!IS_ENABLED(CONFIG_KCSAN_IGNORE_ATOMICS)) { \
check_access(ptr, bits / BITS_PER_BYTE, \
KCSAN_ACCESS_WRITE | KCSAN_ACCESS_ATOMIC, _RET_IP_); \
} \
__atomic_store_n(ptr, v, memorder); \
} \
EXPORT_SYMBOL(__tsan_atomic##bits##_store)
#define DEFINE_TSAN_ATOMIC_RMW(op, bits, suffix) \
u##bits __tsan_atomic##bits##_##op(u##bits *ptr, u##bits v, int memorder); \
u##bits __tsan_atomic##bits##_##op(u##bits *ptr, u##bits v, int memorder) \
{ \
if (!IS_ENABLED(CONFIG_KCSAN_IGNORE_ATOMICS)) { \
check_access(ptr, bits / BITS_PER_BYTE, \
KCSAN_ACCESS_COMPOUND | KCSAN_ACCESS_WRITE | \
KCSAN_ACCESS_ATOMIC, _RET_IP_); \
} \
return __atomic_##op##suffix(ptr, v, memorder); \
} \
EXPORT_SYMBOL(__tsan_atomic##bits##_##op)
/*
* Note: CAS operations are always classified as write, even in case they
* fail. We cannot perform check_access() after a write, as it might lead to
* false positives, in cases such as:
*
* T0: __atomic_compare_exchange_n(&p->flag, &old, 1, ...)
*
* T1: if (__atomic_load_n(&p->flag, ...)) {
* modify *p;
* p->flag = 0;
* }
*
* The only downside is that, if there are 3 threads, with one CAS that
* succeeds, another CAS that fails, and an unmarked racing operation, we may
* point at the wrong CAS as the source of the race. However, if we assume that
* all CAS can succeed in some other execution, the data race is still valid.
*/
#define DEFINE_TSAN_ATOMIC_CMPXCHG(bits, strength, weak) \
int __tsan_atomic##bits##_compare_exchange_##strength(u##bits *ptr, u##bits *exp, \
u##bits val, int mo, int fail_mo); \
int __tsan_atomic##bits##_compare_exchange_##strength(u##bits *ptr, u##bits *exp, \
u##bits val, int mo, int fail_mo) \
{ \
if (!IS_ENABLED(CONFIG_KCSAN_IGNORE_ATOMICS)) { \
check_access(ptr, bits / BITS_PER_BYTE, \
KCSAN_ACCESS_COMPOUND | KCSAN_ACCESS_WRITE | \
KCSAN_ACCESS_ATOMIC, _RET_IP_); \
} \
return __atomic_compare_exchange_n(ptr, exp, val, weak, mo, fail_mo); \
} \
EXPORT_SYMBOL(__tsan_atomic##bits##_compare_exchange_##strength)
#define DEFINE_TSAN_ATOMIC_CMPXCHG_VAL(bits) \
u##bits __tsan_atomic##bits##_compare_exchange_val(u##bits *ptr, u##bits exp, u##bits val, \
int mo, int fail_mo); \
u##bits __tsan_atomic##bits##_compare_exchange_val(u##bits *ptr, u##bits exp, u##bits val, \
int mo, int fail_mo) \
{ \
if (!IS_ENABLED(CONFIG_KCSAN_IGNORE_ATOMICS)) { \
check_access(ptr, bits / BITS_PER_BYTE, \
KCSAN_ACCESS_COMPOUND | KCSAN_ACCESS_WRITE | \
KCSAN_ACCESS_ATOMIC, _RET_IP_); \
} \
__atomic_compare_exchange_n(ptr, &exp, val, 0, mo, fail_mo); \
return exp; \
} \
EXPORT_SYMBOL(__tsan_atomic##bits##_compare_exchange_val)
#define DEFINE_TSAN_ATOMIC_OPS(bits) \
DEFINE_TSAN_ATOMIC_LOAD_STORE(bits); \
DEFINE_TSAN_ATOMIC_RMW(exchange, bits, _n); \
DEFINE_TSAN_ATOMIC_RMW(fetch_add, bits, ); \
DEFINE_TSAN_ATOMIC_RMW(fetch_sub, bits, ); \
DEFINE_TSAN_ATOMIC_RMW(fetch_and, bits, ); \
DEFINE_TSAN_ATOMIC_RMW(fetch_or, bits, ); \
DEFINE_TSAN_ATOMIC_RMW(fetch_xor, bits, ); \
DEFINE_TSAN_ATOMIC_RMW(fetch_nand, bits, ); \
DEFINE_TSAN_ATOMIC_CMPXCHG(bits, strong, 0); \
DEFINE_TSAN_ATOMIC_CMPXCHG(bits, weak, 1); \
DEFINE_TSAN_ATOMIC_CMPXCHG_VAL(bits)
DEFINE_TSAN_ATOMIC_OPS(8);
DEFINE_TSAN_ATOMIC_OPS(16);
DEFINE_TSAN_ATOMIC_OPS(32);
DEFINE_TSAN_ATOMIC_OPS(64);
void __tsan_atomic_thread_fence(int memorder);
void __tsan_atomic_thread_fence(int memorder)
{
__atomic_thread_fence(memorder);
}
EXPORT_SYMBOL(__tsan_atomic_thread_fence);
void __tsan_atomic_signal_fence(int memorder);
void __tsan_atomic_signal_fence(int memorder) { }
EXPORT_SYMBOL(__tsan_atomic_signal_fence);