diff --git a/drivers/iio/accel/bmc150-accel-core.c b/drivers/iio/accel/bmc150-accel-core.c
index bf17aae..59b380d 100644
--- a/drivers/iio/accel/bmc150-accel-core.c
+++ b/drivers/iio/accel/bmc150-accel-core.c
@@ -67,6 +67,9 @@
 #define BMC150_ACCEL_REG_PMU_BW		0x10
 #define BMC150_ACCEL_DEF_BW			125
 
+#define BMC150_ACCEL_REG_RESET			0x14
+#define BMC150_ACCEL_RESET_VAL			0xB6
+
 #define BMC150_ACCEL_REG_INT_MAP_0		0x19
 #define BMC150_ACCEL_INT_MAP_0_BIT_SLOPE	BIT(2)
 
@@ -1497,6 +1500,14 @@
 	int ret, i;
 	unsigned int val;
 
+	/*
+	 * Reset chip to get it in a known good state. A delay of 1.8ms after
+	 * reset is required according to the data sheets of supported chips.
+	 */
+	regmap_write(data->regmap, BMC150_ACCEL_REG_RESET,
+		     BMC150_ACCEL_RESET_VAL);
+	usleep_range(1800, 2500);
+
 	ret = regmap_read(data->regmap, BMC150_ACCEL_REG_CHIP_ID, &val);
 	if (ret < 0) {
 		dev_err(dev, "Error: Reading chip id\n");
diff --git a/drivers/iio/accel/kxsd9.c b/drivers/iio/accel/kxsd9.c
index da5fb67..9d72d4b 100644
--- a/drivers/iio/accel/kxsd9.c
+++ b/drivers/iio/accel/kxsd9.c
@@ -166,6 +166,7 @@
 		ret = spi_w8r8(st->us, KXSD9_READ(KXSD9_REG_CTRL_C));
 		if (ret < 0)
 			goto error_ret;
+		*val = 0;
 		*val2 = kxsd9_micro_scales[ret & KXSD9_FS_MASK];
 		ret = IIO_VAL_INT_PLUS_MICRO;
 		break;
diff --git a/drivers/iio/common/hid-sensors/hid-sensor-attributes.c b/drivers/iio/common/hid-sensors/hid-sensor-attributes.c
index e81f434..dc33c1d 100644
--- a/drivers/iio/common/hid-sensors/hid-sensor-attributes.c
+++ b/drivers/iio/common/hid-sensors/hid-sensor-attributes.c
@@ -56,8 +56,8 @@
 	{HID_USAGE_SENSOR_ALS, 0, 1, 0},
 	{HID_USAGE_SENSOR_ALS, HID_USAGE_SENSOR_UNITS_LUX, 1, 0},
 
-	{HID_USAGE_SENSOR_PRESSURE, 0, 100000, 0},
-	{HID_USAGE_SENSOR_PRESSURE, HID_USAGE_SENSOR_UNITS_PASCAL, 1, 0},
+	{HID_USAGE_SENSOR_PRESSURE, 0, 100, 0},
+	{HID_USAGE_SENSOR_PRESSURE, HID_USAGE_SENSOR_UNITS_PASCAL, 0, 1000},
 };
 
 static int pow_10(unsigned power)
diff --git a/drivers/iio/industrialio-buffer.c b/drivers/iio/industrialio-buffer.c
index 49bf9c5..158aaf4 100644
--- a/drivers/iio/industrialio-buffer.c
+++ b/drivers/iio/industrialio-buffer.c
@@ -110,7 +110,7 @@
 	DEFINE_WAIT_FUNC(wait, woken_wake_function);
 	size_t datum_size;
 	size_t to_wait;
-	int ret;
+	int ret = 0;
 
 	if (!indio_dev->info)
 		return -ENODEV;
@@ -153,7 +153,7 @@
 		ret = rb->access->read_first_n(rb, n, buf);
 		if (ret == 0 && (filp->f_flags & O_NONBLOCK))
 			ret = -EAGAIN;
-	 } while (ret == 0);
+	} while (ret == 0);
 	remove_wait_queue(&rb->pollq, &wait);
 
 	return ret;
diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c
index f914d5d..d2b8899 100644
--- a/drivers/iio/industrialio-core.c
+++ b/drivers/iio/industrialio-core.c
@@ -613,9 +613,8 @@
 			return sprintf(buf, "%d.%09u\n", vals[0], vals[1]);
 	case IIO_VAL_FRACTIONAL:
 		tmp = div_s64((s64)vals[0] * 1000000000LL, vals[1]);
-		vals[1] = do_div(tmp, 1000000000LL);
-		vals[0] = tmp;
-		return sprintf(buf, "%d.%09u\n", vals[0], vals[1]);
+		vals[0] = (int)div_s64_rem(tmp, 1000000000, &vals[1]);
+		return sprintf(buf, "%d.%09u\n", vals[0], abs(vals[1]));
 	case IIO_VAL_FRACTIONAL_LOG2:
 		tmp = (s64)vals[0] * 1000000000LL >> vals[1];
 		vals[1] = do_div(tmp, 1000000000LL);
diff --git a/tools/iio/iio_generic_buffer.c b/tools/iio/iio_generic_buffer.c
index ae68bf0..f39c0e9 100644
--- a/tools/iio/iio_generic_buffer.c
+++ b/tools/iio/iio_generic_buffer.c
@@ -456,7 +456,7 @@
 
 	if (notrigger) {
 		printf("trigger-less mode selected\n");
-	} if (trig_num >= 0) {
+	} else if (trig_num >= 0) {
 		char *trig_dev_name;
 		ret = asprintf(&trig_dev_name, "%strigger%d", iio_dir, trig_num);
 		if (ret < 0) {