ALSA: usb-audio: Add boot quirk for MOTU M Series
Add delay to make sure that audio urbs are not sent too early.
Otherwise the device hangs. Windows driver makes ~2s delay, so use
about the same time delay value.
snd_usb_apply_boot_quirk() is called 3 times for my MOTU M4, which
is an overkill. Thus a quirk that is called only once is implemented.
Also send two vendor-specific control messages before and after
the delay. This behaviour is blindly copied from the Windows driver.
Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Link: https://lore.kernel.org/r/20200112102358.18085-1-alexander@tsoy.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c
index 11159fc..3a5242e3 100644
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -1113,6 +1113,31 @@ static int snd_usb_motu_microbookii_boot_quirk(struct usb_device *dev)
return err;
}
+static int snd_usb_motu_m_series_boot_quirk(struct usb_device *dev)
+{
+ int ret;
+
+ if (snd_usb_pipe_sanity_check(dev, usb_sndctrlpipe(dev, 0)))
+ return -EINVAL;
+ ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+ 1, USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ 0x0, 0, NULL, 0, 1000);
+
+ if (ret < 0)
+ return ret;
+
+ msleep(2000);
+
+ ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+ 1, USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ 0x20, 0, NULL, 0, 1000);
+
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
/*
* Setup quirks
*/
@@ -1297,6 +1322,19 @@ int snd_usb_apply_boot_quirk(struct usb_device *dev,
return 0;
}
+int snd_usb_apply_boot_quirk_once(struct usb_device *dev,
+ struct usb_interface *intf,
+ const struct snd_usb_audio_quirk *quirk,
+ unsigned int id)
+{
+ switch (id) {
+ case USB_ID(0x07fd, 0x0008): /* MOTU M Series */
+ return snd_usb_motu_m_series_boot_quirk(dev);
+ }
+
+ return 0;
+}
+
/*
* check if the device uses big-endian samples
*/
