| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * This file is based on code from OCTEON SDK by Cavium Networks. |
| * |
| * Copyright (c) 2003-2010 Cavium Networks |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/netdevice.h> |
| #include <linux/etherdevice.h> |
| #include <linux/ip.h> |
| #include <linux/ratelimit.h> |
| #include <linux/string.h> |
| #include <linux/interrupt.h> |
| #include <net/dst.h> |
| #ifdef CONFIG_XFRM |
| #include <linux/xfrm.h> |
| #include <net/xfrm.h> |
| #endif /* CONFIG_XFRM */ |
| |
| #include <linux/atomic.h> |
| #include <net/sch_generic.h> |
| |
| #include "octeon-ethernet.h" |
| #include "ethernet-defines.h" |
| #include "ethernet-tx.h" |
| #include "ethernet-util.h" |
| |
| #define CVM_OCT_SKB_CB(skb) ((u64 *)((skb)->cb)) |
| |
| /* |
| * You can define GET_SKBUFF_QOS() to override how the skbuff output |
| * function determines which output queue is used. The default |
| * implementation always uses the base queue for the port. If, for |
| * example, you wanted to use the skb->priority field, define |
| * GET_SKBUFF_QOS as: #define GET_SKBUFF_QOS(skb) ((skb)->priority) |
| */ |
| #ifndef GET_SKBUFF_QOS |
| #define GET_SKBUFF_QOS(skb) 0 |
| #endif |
| |
| static void cvm_oct_tx_do_cleanup(unsigned long arg); |
| static DECLARE_TASKLET_OLD(cvm_oct_tx_cleanup_tasklet, cvm_oct_tx_do_cleanup); |
| |
| /* Maximum number of SKBs to try to free per xmit packet. */ |
| #define MAX_SKB_TO_FREE (MAX_OUT_QUEUE_DEPTH * 2) |
| |
| static inline int cvm_oct_adjust_skb_to_free(int skb_to_free, int fau) |
| { |
| int undo; |
| |
| undo = skb_to_free > 0 ? MAX_SKB_TO_FREE : skb_to_free + |
| MAX_SKB_TO_FREE; |
| if (undo > 0) |
| cvmx_fau_atomic_add32(fau, -undo); |
| skb_to_free = -skb_to_free > MAX_SKB_TO_FREE ? MAX_SKB_TO_FREE : |
| -skb_to_free; |
| return skb_to_free; |
| } |
| |
| static void cvm_oct_kick_tx_poll_watchdog(void) |
| { |
| union cvmx_ciu_timx ciu_timx; |
| |
| ciu_timx.u64 = 0; |
| ciu_timx.s.one_shot = 1; |
| ciu_timx.s.len = cvm_oct_tx_poll_interval; |
| cvmx_write_csr(CVMX_CIU_TIMX(1), ciu_timx.u64); |
| } |
| |
| static void cvm_oct_free_tx_skbs(struct net_device *dev) |
| { |
| int skb_to_free; |
| int qos, queues_per_port; |
| int total_remaining = 0; |
| unsigned long flags; |
| struct octeon_ethernet *priv = netdev_priv(dev); |
| |
| queues_per_port = cvmx_pko_get_num_queues(priv->port); |
| /* Drain any pending packets in the free list */ |
| for (qos = 0; qos < queues_per_port; qos++) { |
| if (skb_queue_len(&priv->tx_free_list[qos]) == 0) |
| continue; |
| skb_to_free = cvmx_fau_fetch_and_add32(priv->fau + qos * 4, |
| MAX_SKB_TO_FREE); |
| skb_to_free = cvm_oct_adjust_skb_to_free(skb_to_free, |
| priv->fau + qos * 4); |
| if (skb_to_free > 0) { |
| struct sk_buff *to_free_list = NULL; |
| |
| spin_lock_irqsave(&priv->tx_free_list[qos].lock, flags); |
| while (skb_to_free > 0) { |
| struct sk_buff *t; |
| |
| t = __skb_dequeue(&priv->tx_free_list[qos]); |
| t->next = to_free_list; |
| to_free_list = t; |
| skb_to_free--; |
| } |
| spin_unlock_irqrestore(&priv->tx_free_list[qos].lock, |
| flags); |
| /* Do the actual freeing outside of the lock. */ |
| while (to_free_list) { |
| struct sk_buff *t = to_free_list; |
| |
| to_free_list = to_free_list->next; |
| dev_kfree_skb_any(t); |
| } |
| } |
| total_remaining += skb_queue_len(&priv->tx_free_list[qos]); |
| } |
| if (total_remaining < MAX_OUT_QUEUE_DEPTH && netif_queue_stopped(dev)) |
| netif_wake_queue(dev); |
| if (total_remaining) |
| cvm_oct_kick_tx_poll_watchdog(); |
| } |
| |
| /** |
| * cvm_oct_xmit - transmit a packet |
| * @skb: Packet to send |
| * @dev: Device info structure |
| * |
| * Returns Always returns NETDEV_TX_OK |
| */ |
| netdev_tx_t cvm_oct_xmit(struct sk_buff *skb, struct net_device *dev) |
| { |
| union cvmx_pko_command_word0 pko_command; |
| union cvmx_buf_ptr hw_buffer; |
| u64 old_scratch; |
| u64 old_scratch2; |
| int qos; |
| int i; |
| enum {QUEUE_CORE, QUEUE_HW, QUEUE_DROP} queue_type; |
| struct octeon_ethernet *priv = netdev_priv(dev); |
| struct sk_buff *to_free_list; |
| int skb_to_free; |
| int buffers_to_free; |
| u32 total_to_clean; |
| unsigned long flags; |
| #if REUSE_SKBUFFS_WITHOUT_FREE |
| unsigned char *fpa_head; |
| #endif |
| |
| /* |
| * Prefetch the private data structure. It is larger than the |
| * one cache line. |
| */ |
| prefetch(priv); |
| |
| /* |
| * The check on CVMX_PKO_QUEUES_PER_PORT_* is designed to |
| * completely remove "qos" in the event neither interface |
| * supports multiple queues per port. |
| */ |
| if ((CVMX_PKO_QUEUES_PER_PORT_INTERFACE0 > 1) || |
| (CVMX_PKO_QUEUES_PER_PORT_INTERFACE1 > 1)) { |
| qos = GET_SKBUFF_QOS(skb); |
| if (qos <= 0) |
| qos = 0; |
| else if (qos >= cvmx_pko_get_num_queues(priv->port)) |
| qos = 0; |
| } else { |
| qos = 0; |
| } |
| |
| if (USE_ASYNC_IOBDMA) { |
| /* Save scratch in case userspace is using it */ |
| CVMX_SYNCIOBDMA; |
| old_scratch = cvmx_scratch_read64(CVMX_SCR_SCRATCH); |
| old_scratch2 = cvmx_scratch_read64(CVMX_SCR_SCRATCH + 8); |
| |
| /* |
| * Fetch and increment the number of packets to be |
| * freed. |
| */ |
| cvmx_fau_async_fetch_and_add32(CVMX_SCR_SCRATCH + 8, |
| FAU_NUM_PACKET_BUFFERS_TO_FREE, |
| 0); |
| cvmx_fau_async_fetch_and_add32(CVMX_SCR_SCRATCH, |
| priv->fau + qos * 4, |
| MAX_SKB_TO_FREE); |
| } |
| |
| /* |
| * We have space for 6 segment pointers, If there will be more |
| * than that, we must linearize. |
| */ |
| if (unlikely(skb_shinfo(skb)->nr_frags > 5)) { |
| if (unlikely(__skb_linearize(skb))) { |
| queue_type = QUEUE_DROP; |
| if (USE_ASYNC_IOBDMA) { |
| /* |
| * Get the number of skbuffs in use |
| * by the hardware |
| */ |
| CVMX_SYNCIOBDMA; |
| skb_to_free = |
| cvmx_scratch_read64(CVMX_SCR_SCRATCH); |
| } else { |
| /* |
| * Get the number of skbuffs in use |
| * by the hardware |
| */ |
| skb_to_free = |
| cvmx_fau_fetch_and_add32(priv->fau + |
| qos * 4, |
| MAX_SKB_TO_FREE); |
| } |
| skb_to_free = cvm_oct_adjust_skb_to_free(skb_to_free, |
| priv->fau + |
| qos * 4); |
| spin_lock_irqsave(&priv->tx_free_list[qos].lock, flags); |
| goto skip_xmit; |
| } |
| } |
| |
| /* |
| * The CN3XXX series of parts has an errata (GMX-401) which |
| * causes the GMX block to hang if a collision occurs towards |
| * the end of a <68 byte packet. As a workaround for this, we |
| * pad packets to be 68 bytes whenever we are in half duplex |
| * mode. We don't handle the case of having a small packet but |
| * no room to add the padding. The kernel should always give |
| * us at least a cache line |
| */ |
| if ((skb->len < 64) && OCTEON_IS_MODEL(OCTEON_CN3XXX)) { |
| union cvmx_gmxx_prtx_cfg gmx_prt_cfg; |
| int interface = INTERFACE(priv->port); |
| int index = INDEX(priv->port); |
| |
| if (interface < 2) { |
| /* We only need to pad packet in half duplex mode */ |
| gmx_prt_cfg.u64 = |
| cvmx_read_csr(CVMX_GMXX_PRTX_CFG(index, interface)); |
| if (gmx_prt_cfg.s.duplex == 0) { |
| int add_bytes = 64 - skb->len; |
| |
| if ((skb_tail_pointer(skb) + add_bytes) <= |
| skb_end_pointer(skb)) |
| __skb_put_zero(skb, add_bytes); |
| } |
| } |
| } |
| |
| /* Build the PKO command */ |
| pko_command.u64 = 0; |
| #ifdef __LITTLE_ENDIAN |
| pko_command.s.le = 1; |
| #endif |
| pko_command.s.n2 = 1; /* Don't pollute L2 with the outgoing packet */ |
| pko_command.s.segs = 1; |
| pko_command.s.total_bytes = skb->len; |
| pko_command.s.size0 = CVMX_FAU_OP_SIZE_32; |
| pko_command.s.subone0 = 1; |
| |
| pko_command.s.dontfree = 1; |
| |
| /* Build the PKO buffer pointer */ |
| hw_buffer.u64 = 0; |
| if (skb_shinfo(skb)->nr_frags == 0) { |
| hw_buffer.s.addr = XKPHYS_TO_PHYS((uintptr_t)skb->data); |
| hw_buffer.s.pool = 0; |
| hw_buffer.s.size = skb->len; |
| } else { |
| hw_buffer.s.addr = XKPHYS_TO_PHYS((uintptr_t)skb->data); |
| hw_buffer.s.pool = 0; |
| hw_buffer.s.size = skb_headlen(skb); |
| CVM_OCT_SKB_CB(skb)[0] = hw_buffer.u64; |
| for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { |
| skb_frag_t *fs = skb_shinfo(skb)->frags + i; |
| |
| hw_buffer.s.addr = |
| XKPHYS_TO_PHYS((uintptr_t)skb_frag_address(fs)); |
| hw_buffer.s.size = skb_frag_size(fs); |
| CVM_OCT_SKB_CB(skb)[i + 1] = hw_buffer.u64; |
| } |
| hw_buffer.s.addr = |
| XKPHYS_TO_PHYS((uintptr_t)CVM_OCT_SKB_CB(skb)); |
| hw_buffer.s.size = skb_shinfo(skb)->nr_frags + 1; |
| pko_command.s.segs = skb_shinfo(skb)->nr_frags + 1; |
| pko_command.s.gather = 1; |
| goto dont_put_skbuff_in_hw; |
| } |
| |
| /* |
| * See if we can put this skb in the FPA pool. Any strange |
| * behavior from the Linux networking stack will most likely |
| * be caused by a bug in the following code. If some field is |
| * in use by the network stack and gets carried over when a |
| * buffer is reused, bad things may happen. If in doubt and |
| * you dont need the absolute best performance, disable the |
| * define REUSE_SKBUFFS_WITHOUT_FREE. The reuse of buffers has |
| * shown a 25% increase in performance under some loads. |
| */ |
| #if REUSE_SKBUFFS_WITHOUT_FREE |
| fpa_head = skb->head + 256 - ((unsigned long)skb->head & 0x7f); |
| if (unlikely(skb->data < fpa_head)) { |
| /* TX buffer beginning can't meet FPA alignment constraints */ |
| goto dont_put_skbuff_in_hw; |
| } |
| if (unlikely |
| ((skb_end_pointer(skb) - fpa_head) < CVMX_FPA_PACKET_POOL_SIZE)) { |
| /* TX buffer isn't large enough for the FPA */ |
| goto dont_put_skbuff_in_hw; |
| } |
| if (unlikely(skb_shared(skb))) { |
| /* TX buffer sharing data with someone else */ |
| goto dont_put_skbuff_in_hw; |
| } |
| if (unlikely(skb_cloned(skb))) { |
| /* TX buffer has been cloned */ |
| goto dont_put_skbuff_in_hw; |
| } |
| if (unlikely(skb_header_cloned(skb))) { |
| /* TX buffer header has been cloned */ |
| goto dont_put_skbuff_in_hw; |
| } |
| if (unlikely(skb->destructor)) { |
| /* TX buffer has a destructor */ |
| goto dont_put_skbuff_in_hw; |
| } |
| if (unlikely(skb_shinfo(skb)->nr_frags)) { |
| /* TX buffer has fragments */ |
| goto dont_put_skbuff_in_hw; |
| } |
| if (unlikely |
| (skb->truesize != |
| sizeof(*skb) + skb_end_offset(skb))) { |
| /* TX buffer truesize has been changed */ |
| goto dont_put_skbuff_in_hw; |
| } |
| |
| /* |
| * We can use this buffer in the FPA. We don't need the FAU |
| * update anymore |
| */ |
| pko_command.s.dontfree = 0; |
| |
| hw_buffer.s.back = ((unsigned long)skb->data >> 7) - |
| ((unsigned long)fpa_head >> 7); |
| |
| *(struct sk_buff **)(fpa_head - sizeof(void *)) = skb; |
| |
| /* |
| * The skbuff will be reused without ever being freed. We must |
| * cleanup a bunch of core things. |
| */ |
| dst_release(skb_dst(skb)); |
| skb_dst_set(skb, NULL); |
| skb_ext_reset(skb); |
| nf_reset_ct(skb); |
| skb_reset_redirect(skb); |
| |
| #ifdef CONFIG_NET_SCHED |
| skb->tc_index = 0; |
| #endif /* CONFIG_NET_SCHED */ |
| #endif /* REUSE_SKBUFFS_WITHOUT_FREE */ |
| |
| dont_put_skbuff_in_hw: |
| |
| /* Check if we can use the hardware checksumming */ |
| if ((skb->protocol == htons(ETH_P_IP)) && |
| (ip_hdr(skb)->version == 4) && |
| (ip_hdr(skb)->ihl == 5) && |
| ((ip_hdr(skb)->frag_off == 0) || |
| (ip_hdr(skb)->frag_off == htons(1 << 14))) && |
| ((ip_hdr(skb)->protocol == IPPROTO_TCP) || |
| (ip_hdr(skb)->protocol == IPPROTO_UDP))) { |
| /* Use hardware checksum calc */ |
| pko_command.s.ipoffp1 = skb_network_offset(skb) + 1; |
| } |
| |
| if (USE_ASYNC_IOBDMA) { |
| /* Get the number of skbuffs in use by the hardware */ |
| CVMX_SYNCIOBDMA; |
| skb_to_free = cvmx_scratch_read64(CVMX_SCR_SCRATCH); |
| buffers_to_free = cvmx_scratch_read64(CVMX_SCR_SCRATCH + 8); |
| } else { |
| /* Get the number of skbuffs in use by the hardware */ |
| skb_to_free = cvmx_fau_fetch_and_add32(priv->fau + qos * 4, |
| MAX_SKB_TO_FREE); |
| buffers_to_free = |
| cvmx_fau_fetch_and_add32(FAU_NUM_PACKET_BUFFERS_TO_FREE, 0); |
| } |
| |
| skb_to_free = cvm_oct_adjust_skb_to_free(skb_to_free, |
| priv->fau + qos * 4); |
| |
| /* |
| * If we're sending faster than the receive can free them then |
| * don't do the HW free. |
| */ |
| if ((buffers_to_free < -100) && !pko_command.s.dontfree) |
| pko_command.s.dontfree = 1; |
| |
| if (pko_command.s.dontfree) { |
| queue_type = QUEUE_CORE; |
| pko_command.s.reg0 = priv->fau + qos * 4; |
| } else { |
| queue_type = QUEUE_HW; |
| } |
| if (USE_ASYNC_IOBDMA) |
| cvmx_fau_async_fetch_and_add32(CVMX_SCR_SCRATCH, |
| FAU_TOTAL_TX_TO_CLEAN, 1); |
| |
| spin_lock_irqsave(&priv->tx_free_list[qos].lock, flags); |
| |
| /* Drop this packet if we have too many already queued to the HW */ |
| if (unlikely(skb_queue_len(&priv->tx_free_list[qos]) >= |
| MAX_OUT_QUEUE_DEPTH)) { |
| if (dev->tx_queue_len != 0) { |
| /* Drop the lock when notifying the core. */ |
| spin_unlock_irqrestore(&priv->tx_free_list[qos].lock, |
| flags); |
| netif_stop_queue(dev); |
| spin_lock_irqsave(&priv->tx_free_list[qos].lock, |
| flags); |
| } else { |
| /* If not using normal queueing. */ |
| queue_type = QUEUE_DROP; |
| goto skip_xmit; |
| } |
| } |
| |
| cvmx_pko_send_packet_prepare(priv->port, priv->queue + qos, |
| CVMX_PKO_LOCK_NONE); |
| |
| /* Send the packet to the output queue */ |
| if (unlikely(cvmx_pko_send_packet_finish(priv->port, |
| priv->queue + qos, |
| pko_command, hw_buffer, |
| CVMX_PKO_LOCK_NONE))) { |
| printk_ratelimited("%s: Failed to send the packet\n", |
| dev->name); |
| queue_type = QUEUE_DROP; |
| } |
| skip_xmit: |
| to_free_list = NULL; |
| |
| switch (queue_type) { |
| case QUEUE_DROP: |
| skb->next = to_free_list; |
| to_free_list = skb; |
| dev->stats.tx_dropped++; |
| break; |
| case QUEUE_HW: |
| cvmx_fau_atomic_add32(FAU_NUM_PACKET_BUFFERS_TO_FREE, -1); |
| break; |
| case QUEUE_CORE: |
| __skb_queue_tail(&priv->tx_free_list[qos], skb); |
| break; |
| default: |
| BUG(); |
| } |
| |
| while (skb_to_free > 0) { |
| struct sk_buff *t = __skb_dequeue(&priv->tx_free_list[qos]); |
| |
| t->next = to_free_list; |
| to_free_list = t; |
| skb_to_free--; |
| } |
| |
| spin_unlock_irqrestore(&priv->tx_free_list[qos].lock, flags); |
| |
| /* Do the actual freeing outside of the lock. */ |
| while (to_free_list) { |
| struct sk_buff *t = to_free_list; |
| |
| to_free_list = to_free_list->next; |
| dev_kfree_skb_any(t); |
| } |
| |
| if (USE_ASYNC_IOBDMA) { |
| CVMX_SYNCIOBDMA; |
| total_to_clean = cvmx_scratch_read64(CVMX_SCR_SCRATCH); |
| /* Restore the scratch area */ |
| cvmx_scratch_write64(CVMX_SCR_SCRATCH, old_scratch); |
| cvmx_scratch_write64(CVMX_SCR_SCRATCH + 8, old_scratch2); |
| } else { |
| total_to_clean = |
| cvmx_fau_fetch_and_add32(FAU_TOTAL_TX_TO_CLEAN, 1); |
| } |
| |
| if (total_to_clean & 0x3ff) { |
| /* |
| * Schedule the cleanup tasklet every 1024 packets for |
| * the pathological case of high traffic on one port |
| * delaying clean up of packets on a different port |
| * that is blocked waiting for the cleanup. |
| */ |
| tasklet_schedule(&cvm_oct_tx_cleanup_tasklet); |
| } |
| |
| cvm_oct_kick_tx_poll_watchdog(); |
| |
| return NETDEV_TX_OK; |
| } |
| |
| /** |
| * cvm_oct_xmit_pow - transmit a packet to the POW |
| * @skb: Packet to send |
| * @dev: Device info structure |
| * Returns Always returns zero |
| */ |
| netdev_tx_t cvm_oct_xmit_pow(struct sk_buff *skb, struct net_device *dev) |
| { |
| struct octeon_ethernet *priv = netdev_priv(dev); |
| void *packet_buffer; |
| void *copy_location; |
| |
| /* Get a work queue entry */ |
| struct cvmx_wqe *work = cvmx_fpa_alloc(CVMX_FPA_WQE_POOL); |
| |
| if (unlikely(!work)) { |
| printk_ratelimited("%s: Failed to allocate a work queue entry\n", |
| dev->name); |
| dev->stats.tx_dropped++; |
| dev_kfree_skb_any(skb); |
| return 0; |
| } |
| |
| /* Get a packet buffer */ |
| packet_buffer = cvmx_fpa_alloc(CVMX_FPA_PACKET_POOL); |
| if (unlikely(!packet_buffer)) { |
| printk_ratelimited("%s: Failed to allocate a packet buffer\n", |
| dev->name); |
| cvmx_fpa_free(work, CVMX_FPA_WQE_POOL, 1); |
| dev->stats.tx_dropped++; |
| dev_kfree_skb_any(skb); |
| return 0; |
| } |
| |
| /* |
| * Calculate where we need to copy the data to. We need to |
| * leave 8 bytes for a next pointer (unused). We also need to |
| * include any configure skip. Then we need to align the IP |
| * packet src and dest into the same 64bit word. The below |
| * calculation may add a little extra, but that doesn't |
| * hurt. |
| */ |
| copy_location = packet_buffer + sizeof(u64); |
| copy_location += ((CVMX_HELPER_FIRST_MBUFF_SKIP + 7) & 0xfff8) + 6; |
| |
| /* |
| * We have to copy the packet since whoever processes this |
| * packet will free it to a hardware pool. We can't use the |
| * trick of counting outstanding packets like in |
| * cvm_oct_xmit. |
| */ |
| memcpy(copy_location, skb->data, skb->len); |
| |
| /* |
| * Fill in some of the work queue fields. We may need to add |
| * more if the software at the other end needs them. |
| */ |
| if (!OCTEON_IS_MODEL(OCTEON_CN68XX)) |
| work->word0.pip.cn38xx.hw_chksum = skb->csum; |
| work->word1.len = skb->len; |
| cvmx_wqe_set_port(work, priv->port); |
| cvmx_wqe_set_qos(work, priv->port & 0x7); |
| cvmx_wqe_set_grp(work, pow_send_group); |
| work->word1.tag_type = CVMX_HELPER_INPUT_TAG_TYPE; |
| work->word1.tag = pow_send_group; /* FIXME */ |
| /* Default to zero. Sets of zero later are commented out */ |
| work->word2.u64 = 0; |
| work->word2.s.bufs = 1; |
| work->packet_ptr.u64 = 0; |
| work->packet_ptr.s.addr = cvmx_ptr_to_phys(copy_location); |
| work->packet_ptr.s.pool = CVMX_FPA_PACKET_POOL; |
| work->packet_ptr.s.size = CVMX_FPA_PACKET_POOL_SIZE; |
| work->packet_ptr.s.back = (copy_location - packet_buffer) >> 7; |
| |
| if (skb->protocol == htons(ETH_P_IP)) { |
| work->word2.s.ip_offset = 14; |
| #if 0 |
| work->word2.s.vlan_valid = 0; /* FIXME */ |
| work->word2.s.vlan_cfi = 0; /* FIXME */ |
| work->word2.s.vlan_id = 0; /* FIXME */ |
| work->word2.s.dec_ipcomp = 0; /* FIXME */ |
| #endif |
| work->word2.s.tcp_or_udp = |
| (ip_hdr(skb)->protocol == IPPROTO_TCP) || |
| (ip_hdr(skb)->protocol == IPPROTO_UDP); |
| #if 0 |
| /* FIXME */ |
| work->word2.s.dec_ipsec = 0; |
| /* We only support IPv4 right now */ |
| work->word2.s.is_v6 = 0; |
| /* Hardware would set to zero */ |
| work->word2.s.software = 0; |
| /* No error, packet is internal */ |
| work->word2.s.L4_error = 0; |
| #endif |
| work->word2.s.is_frag = !((ip_hdr(skb)->frag_off == 0) || |
| (ip_hdr(skb)->frag_off == |
| cpu_to_be16(1 << 14))); |
| #if 0 |
| /* Assume Linux is sending a good packet */ |
| work->word2.s.IP_exc = 0; |
| #endif |
| work->word2.s.is_bcast = (skb->pkt_type == PACKET_BROADCAST); |
| work->word2.s.is_mcast = (skb->pkt_type == PACKET_MULTICAST); |
| #if 0 |
| /* This is an IP packet */ |
| work->word2.s.not_IP = 0; |
| /* No error, packet is internal */ |
| work->word2.s.rcv_error = 0; |
| /* No error, packet is internal */ |
| work->word2.s.err_code = 0; |
| #endif |
| |
| /* |
| * When copying the data, include 4 bytes of the |
| * ethernet header to align the same way hardware |
| * does. |
| */ |
| memcpy(work->packet_data, skb->data + 10, |
| sizeof(work->packet_data)); |
| } else { |
| #if 0 |
| work->word2.snoip.vlan_valid = 0; /* FIXME */ |
| work->word2.snoip.vlan_cfi = 0; /* FIXME */ |
| work->word2.snoip.vlan_id = 0; /* FIXME */ |
| work->word2.snoip.software = 0; /* Hardware would set to zero */ |
| #endif |
| work->word2.snoip.is_rarp = skb->protocol == htons(ETH_P_RARP); |
| work->word2.snoip.is_arp = skb->protocol == htons(ETH_P_ARP); |
| work->word2.snoip.is_bcast = |
| (skb->pkt_type == PACKET_BROADCAST); |
| work->word2.snoip.is_mcast = |
| (skb->pkt_type == PACKET_MULTICAST); |
| work->word2.snoip.not_IP = 1; /* IP was done up above */ |
| #if 0 |
| /* No error, packet is internal */ |
| work->word2.snoip.rcv_error = 0; |
| /* No error, packet is internal */ |
| work->word2.snoip.err_code = 0; |
| #endif |
| memcpy(work->packet_data, skb->data, sizeof(work->packet_data)); |
| } |
| |
| /* Submit the packet to the POW */ |
| cvmx_pow_work_submit(work, work->word1.tag, work->word1.tag_type, |
| cvmx_wqe_get_qos(work), cvmx_wqe_get_grp(work)); |
| dev->stats.tx_packets++; |
| dev->stats.tx_bytes += skb->len; |
| dev_consume_skb_any(skb); |
| return 0; |
| } |
| |
| /** |
| * cvm_oct_tx_shutdown_dev - free all skb that are currently queued for TX. |
| * @dev: Device being shutdown |
| * |
| */ |
| void cvm_oct_tx_shutdown_dev(struct net_device *dev) |
| { |
| struct octeon_ethernet *priv = netdev_priv(dev); |
| unsigned long flags; |
| int qos; |
| |
| for (qos = 0; qos < 16; qos++) { |
| spin_lock_irqsave(&priv->tx_free_list[qos].lock, flags); |
| while (skb_queue_len(&priv->tx_free_list[qos])) |
| dev_kfree_skb_any(__skb_dequeue |
| (&priv->tx_free_list[qos])); |
| spin_unlock_irqrestore(&priv->tx_free_list[qos].lock, flags); |
| } |
| } |
| |
| static void cvm_oct_tx_do_cleanup(unsigned long arg) |
| { |
| int port; |
| |
| for (port = 0; port < TOTAL_NUMBER_OF_PORTS; port++) { |
| if (cvm_oct_device[port]) { |
| struct net_device *dev = cvm_oct_device[port]; |
| |
| cvm_oct_free_tx_skbs(dev); |
| } |
| } |
| } |
| |
| static irqreturn_t cvm_oct_tx_cleanup_watchdog(int cpl, void *dev_id) |
| { |
| /* Disable the interrupt. */ |
| cvmx_write_csr(CVMX_CIU_TIMX(1), 0); |
| /* Do the work in the tasklet. */ |
| tasklet_schedule(&cvm_oct_tx_cleanup_tasklet); |
| return IRQ_HANDLED; |
| } |
| |
| void cvm_oct_tx_initialize(void) |
| { |
| int i; |
| |
| /* Disable the interrupt. */ |
| cvmx_write_csr(CVMX_CIU_TIMX(1), 0); |
| /* Register an IRQ handler to receive CIU_TIMX(1) interrupts */ |
| i = request_irq(OCTEON_IRQ_TIMER1, |
| cvm_oct_tx_cleanup_watchdog, 0, |
| "Ethernet", cvm_oct_device); |
| |
| if (i) |
| panic("Could not acquire Ethernet IRQ %d\n", OCTEON_IRQ_TIMER1); |
| } |
| |
| void cvm_oct_tx_shutdown(void) |
| { |
| /* Free the interrupt handler */ |
| free_irq(OCTEON_IRQ_TIMER1, cvm_oct_device); |
| } |