net: phy: realtek: Add support for RTL8221B-CG series
Realtek single-port 2.5Gbps Ethernet PHYs are list as below:
RTL8226-CG: the 1st generation 2.5Gbps single port PHY
RTL8226B-CG/RTL8221B-CG: the 2nd generation 2.5Gbps single port PHY
RTL8221B-VB-CG: the 3rd generation 2.5Gbps single port PHY
RTL8221B-VM-CG: the 2.5Gbps single port PHY with MACsec feature
This patch adds the minimal drivers to manage these transceivers.
Signed-off-by: Willy Liu <willy.liu@realtek.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/1604281927-9874-1-git-send-email-willy.liu@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
index fb1db71..2ba0d73 100644
--- a/drivers/net/phy/realtek.c
+++ b/drivers/net/phy/realtek.c
@@ -660,6 +660,46 @@ static struct phy_driver realtek_drvs[] = {
.read_mmd = rtl822x_read_mmd,
.write_mmd = rtl822x_write_mmd,
}, {
+ PHY_ID_MATCH_EXACT(0x001cc838),
+ .name = "RTL8226-CG 2.5Gbps PHY",
+ .get_features = rtl822x_get_features,
+ .config_aneg = rtl822x_config_aneg,
+ .read_status = rtl822x_read_status,
+ .suspend = genphy_suspend,
+ .resume = rtlgen_resume,
+ .read_page = rtl821x_read_page,
+ .write_page = rtl821x_write_page,
+ }, {
+ PHY_ID_MATCH_EXACT(0x001cc848),
+ .name = "RTL8226B-CG_RTL8221B-CG 2.5Gbps PHY",
+ .get_features = rtl822x_get_features,
+ .config_aneg = rtl822x_config_aneg,
+ .read_status = rtl822x_read_status,
+ .suspend = genphy_suspend,
+ .resume = rtlgen_resume,
+ .read_page = rtl821x_read_page,
+ .write_page = rtl821x_write_page,
+ }, {
+ PHY_ID_MATCH_EXACT(0x001cc849),
+ .name = "RTL8221B-VB-CG 2.5Gbps PHY",
+ .get_features = rtl822x_get_features,
+ .config_aneg = rtl822x_config_aneg,
+ .read_status = rtl822x_read_status,
+ .suspend = genphy_suspend,
+ .resume = rtlgen_resume,
+ .read_page = rtl821x_read_page,
+ .write_page = rtl821x_write_page,
+ }, {
+ PHY_ID_MATCH_EXACT(0x001cc84a),
+ .name = "RTL8221B-VM-CG 2.5Gbps PHY",
+ .get_features = rtl822x_get_features,
+ .config_aneg = rtl822x_config_aneg,
+ .read_status = rtl822x_read_status,
+ .suspend = genphy_suspend,
+ .resume = rtlgen_resume,
+ .read_page = rtl821x_read_page,
+ .write_page = rtl821x_write_page,
+ }, {
PHY_ID_MATCH_EXACT(0x001cc961),
.name = "RTL8366RB Gigabit Ethernet",
.config_init = &rtl8366rb_config_init,
