usb: otg: twl4030: Start using struct usb_otg
Use struct usb_otg members with OTG specific functions instead
of usb_phy members.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
diff --git a/drivers/usb/otg/twl4030-usb.c b/drivers/usb/otg/twl4030-usb.c
index 906d524..c4a86da 100644
--- a/drivers/usb/otg/twl4030-usb.c
+++ b/drivers/usb/otg/twl4030-usb.c
@@ -144,7 +144,7 @@
#define GPIO_USB_4PIN_ULPI_2430C (3 << 0)
struct twl4030_usb {
- struct usb_phy otg;
+ struct usb_phy phy;
struct device *dev;
/* TWL4030 internal USB regulator supplies */
@@ -166,7 +166,7 @@
};
/* internal define on top of container_of */
-#define xceiv_to_twl(x) container_of((x), struct twl4030_usb, otg)
+#define phy_to_twl(x) container_of((x), struct twl4030_usb, phy)
/*-------------------------------------------------------------------------*/
@@ -250,6 +250,7 @@
{
int status;
int linkstat = USB_EVENT_NONE;
+ struct usb_otg *otg = twl->phy.otg;
twl->vbus_supplied = false;
@@ -281,7 +282,7 @@
dev_dbg(twl->dev, "HW_CONDITIONS 0x%02x/%d; link %d\n",
status, status, linkstat);
- twl->otg.last_event = linkstat;
+ twl->phy.last_event = linkstat;
/* REVISIT this assumes host and peripheral controllers
* are registered, and that both are active...
@@ -290,11 +291,11 @@
spin_lock_irq(&twl->lock);
twl->linkstat = linkstat;
if (linkstat == USB_EVENT_ID) {
- twl->otg.default_a = true;
- twl->otg.state = OTG_STATE_A_IDLE;
+ otg->default_a = true;
+ twl->phy.state = OTG_STATE_A_IDLE;
} else {
- twl->otg.default_a = false;
- twl->otg.state = OTG_STATE_B_IDLE;
+ otg->default_a = false;
+ twl->phy.state = OTG_STATE_B_IDLE;
}
spin_unlock_irq(&twl->lock);
@@ -520,8 +521,8 @@
else
twl4030_phy_resume(twl);
- atomic_notifier_call_chain(&twl->otg.notifier, status,
- twl->otg.gadget);
+ atomic_notifier_call_chain(&twl->phy.notifier, status,
+ twl->phy.otg->gadget);
}
sysfs_notify(&twl->dev->kobj, NULL, "vbus");
@@ -542,15 +543,15 @@
twl->asleep = 0;
}
- atomic_notifier_call_chain(&twl->otg.notifier, status,
- twl->otg.gadget);
+ atomic_notifier_call_chain(&twl->phy.notifier, status,
+ twl->phy.otg->gadget);
}
sysfs_notify(&twl->dev->kobj, NULL, "vbus");
}
static int twl4030_set_suspend(struct usb_phy *x, int suspend)
{
- struct twl4030_usb *twl = xceiv_to_twl(x);
+ struct twl4030_usb *twl = phy_to_twl(x);
if (suspend)
twl4030_phy_suspend(twl, 1);
@@ -560,33 +561,27 @@
return 0;
}
-static int twl4030_set_peripheral(struct usb_phy *x,
- struct usb_gadget *gadget)
+static int twl4030_set_peripheral(struct usb_otg *otg,
+ struct usb_gadget *gadget)
{
- struct twl4030_usb *twl;
-
- if (!x)
+ if (!otg)
return -ENODEV;
- twl = xceiv_to_twl(x);
- twl->otg.gadget = gadget;
+ otg->gadget = gadget;
if (!gadget)
- twl->otg.state = OTG_STATE_UNDEFINED;
+ otg->phy->state = OTG_STATE_UNDEFINED;
return 0;
}
-static int twl4030_set_host(struct usb_phy *x, struct usb_bus *host)
+static int twl4030_set_host(struct usb_otg *otg, struct usb_bus *host)
{
- struct twl4030_usb *twl;
-
- if (!x)
+ if (!otg)
return -ENODEV;
- twl = xceiv_to_twl(x);
- twl->otg.host = host;
+ otg->host = host;
if (!host)
- twl->otg.state = OTG_STATE_UNDEFINED;
+ otg->phy->state = OTG_STATE_UNDEFINED;
return 0;
}
@@ -596,6 +591,7 @@
struct twl4030_usb_data *pdata = pdev->dev.platform_data;
struct twl4030_usb *twl;
int status, err;
+ struct usb_otg *otg;
if (!pdata) {
dev_dbg(&pdev->dev, "platform_data not available\n");
@@ -606,16 +602,26 @@
if (!twl)
return -ENOMEM;
+ otg = kzalloc(sizeof *otg, GFP_KERNEL);
+ if (!otg) {
+ kfree(twl);
+ return -ENOMEM;
+ }
+
twl->dev = &pdev->dev;
twl->irq = platform_get_irq(pdev, 0);
- twl->otg.dev = twl->dev;
- twl->otg.label = "twl4030";
- twl->otg.set_host = twl4030_set_host;
- twl->otg.set_peripheral = twl4030_set_peripheral;
- twl->otg.set_suspend = twl4030_set_suspend;
twl->usb_mode = pdata->usb_mode;
twl->vbus_supplied = false;
- twl->asleep = 1;
+ twl->asleep = 1;
+
+ twl->phy.dev = twl->dev;
+ twl->phy.label = "twl4030";
+ twl->phy.otg = otg;
+ twl->phy.set_suspend = twl4030_set_suspend;
+
+ otg->phy = &twl->phy;
+ otg->set_host = twl4030_set_host;
+ otg->set_peripheral = twl4030_set_peripheral;
/* init spinlock for workqueue */
spin_lock_init(&twl->lock);
@@ -623,16 +629,17 @@
err = twl4030_usb_ldo_init(twl);
if (err) {
dev_err(&pdev->dev, "ldo init failed\n");
+ kfree(otg);
kfree(twl);
return err;
}
- otg_set_transceiver(&twl->otg);
+ usb_set_transceiver(&twl->phy);
platform_set_drvdata(pdev, twl);
if (device_create_file(&pdev->dev, &dev_attr_vbus))
dev_warn(&pdev->dev, "could not create sysfs file\n");
- ATOMIC_INIT_NOTIFIER_HEAD(&twl->otg.notifier);
+ ATOMIC_INIT_NOTIFIER_HEAD(&twl->phy.notifier);
/* Our job is to use irqs and status from the power module
* to keep the transceiver disabled when nothing's connected.
@@ -649,6 +656,7 @@
if (status < 0) {
dev_dbg(&pdev->dev, "can't get IRQ %d, err %d\n",
twl->irq, status);
+ kfree(otg);
kfree(twl);
return status;
}
@@ -693,6 +701,7 @@
regulator_put(twl->usb1v8);
regulator_put(twl->usb3v1);
+ kfree(twl->phy.otg);
kfree(twl);
return 0;
