// SPDX-License-Identifier: GPL-2.0-only
/*
 *
 * Parts of this file are based on Ralink's 2.6.21 BSP
 *
 * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
 * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
 * Copyright (C) 2013 John Crispin <john@phrozen.org>
 */

#include <linux/kernel.h>
#include <linux/init.h>

#include <asm/mipsregs.h>
#include <asm/mach-ralink/ralink_regs.h>
#include <asm/mach-ralink/rt3883.h>

#include "common.h"

void __init ralink_clk_init(void)
{
	unsigned long cpu_rate, sys_rate;
	u32 syscfg0;
	u32 clksel;
	u32 ddr2;

	syscfg0 = rt_sysc_r32(RT3883_SYSC_REG_SYSCFG0);
	clksel = ((syscfg0 >> RT3883_SYSCFG0_CPUCLK_SHIFT) &
		RT3883_SYSCFG0_CPUCLK_MASK);
	ddr2 = syscfg0 & RT3883_SYSCFG0_DRAM_TYPE_DDR2;

	switch (clksel) {
	case RT3883_SYSCFG0_CPUCLK_250:
		cpu_rate = 250000000;
		sys_rate = (ddr2) ? 125000000 : 83000000;
		break;
	case RT3883_SYSCFG0_CPUCLK_384:
		cpu_rate = 384000000;
		sys_rate = (ddr2) ? 128000000 : 96000000;
		break;
	case RT3883_SYSCFG0_CPUCLK_480:
		cpu_rate = 480000000;
		sys_rate = (ddr2) ? 160000000 : 120000000;
		break;
	case RT3883_SYSCFG0_CPUCLK_500:
		cpu_rate = 500000000;
		sys_rate = (ddr2) ? 166000000 : 125000000;
		break;
	}

	ralink_clk_add("cpu", cpu_rate);
	ralink_clk_add("10000100.timer", sys_rate);
	ralink_clk_add("10000120.watchdog", sys_rate);
	ralink_clk_add("10000500.uart", 40000000);
	ralink_clk_add("10000900.i2c", 40000000);
	ralink_clk_add("10000a00.i2s", 40000000);
	ralink_clk_add("10000b00.spi", sys_rate);
	ralink_clk_add("10000b40.spi", sys_rate);
	ralink_clk_add("10000c00.uartlite", 40000000);
	ralink_clk_add("10100000.ethernet", sys_rate);
	ralink_clk_add("10180000.wmac", 40000000);
}

void __init ralink_of_remap(void)
{
	rt_sysc_membase = plat_of_remap_node("ralink,rt3883-sysc");
	rt_memc_membase = plat_of_remap_node("ralink,rt3883-memc");

	if (!rt_sysc_membase || !rt_memc_membase)
		panic("Failed to remap core resources");
}

void __init prom_soc_init(struct ralink_soc_info *soc_info)
{
	void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT3883_SYSC_BASE);
	const char *name;
	u32 n0;
	u32 n1;
	u32 id;

	n0 = __raw_readl(sysc + RT3883_SYSC_REG_CHIPID0_3);
	n1 = __raw_readl(sysc + RT3883_SYSC_REG_CHIPID4_7);
	id = __raw_readl(sysc + RT3883_SYSC_REG_REVID);

	if (n0 == RT3883_CHIP_NAME0 && n1 == RT3883_CHIP_NAME1) {
		soc_info->compatible = "ralink,rt3883-soc";
		name = "RT3883";
	} else {
		panic("rt3883: unknown SoC, n0:%08x n1:%08x", n0, n1);
	}

	snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
		"Ralink %s ver:%u eco:%u",
		name,
		(id >> RT3883_REVID_VER_ID_SHIFT) & RT3883_REVID_VER_ID_MASK,
		(id & RT3883_REVID_ECO_ID_MASK));

	soc_info->mem_base = RT3883_SDRAM_BASE;
	soc_info->mem_size_min = RT3883_MEM_SIZE_MIN;
	soc_info->mem_size_max = RT3883_MEM_SIZE_MAX;

	ralink_soc = RT3883_SOC;
}