usbnet/cdc_ncm: Don't use stack variables for DMA
The cdc_ncm driver still has a few places where stack variables are
passed to the cdc_ncm_do_request function. This triggers a stack trace in
lib/dma-debug.c if the CONFIG_DEBUG_DMA_API option is set.
Adjust these calls to pass parameters that have been allocated with
kzalloc.
Signed-off-by: Josh Boyer <jwboyer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c
index a03336e..f06fb78 100644
--- a/drivers/net/usb/cdc_ncm.c
+++ b/drivers/net/usb/cdc_ncm.c
@@ -228,23 +228,40 @@
if (ctx->rx_max != le32_to_cpu(ctx->ncm_parm.dwNtbInMaxSize)) {
if (flags & USB_CDC_NCM_NCAP_NTB_INPUT_SIZE) {
- struct usb_cdc_ncm_ndp_input_size ndp_in_sz;
- err = usb_control_msg(ctx->udev,
- usb_sndctrlpipe(ctx->udev, 0),
- USB_CDC_SET_NTB_INPUT_SIZE,
- USB_TYPE_CLASS | USB_DIR_OUT
- | USB_RECIP_INTERFACE,
- 0, iface_no, &ndp_in_sz, 8, 1000);
- } else {
- __le32 dwNtbInMaxSize = cpu_to_le32(ctx->rx_max);
- err = usb_control_msg(ctx->udev,
- usb_sndctrlpipe(ctx->udev, 0),
- USB_CDC_SET_NTB_INPUT_SIZE,
- USB_TYPE_CLASS | USB_DIR_OUT
- | USB_RECIP_INTERFACE,
- 0, iface_no, &dwNtbInMaxSize, 4, 1000);
- }
+ struct usb_cdc_ncm_ndp_input_size *ndp_in_sz;
+ ndp_in_sz = kzalloc(sizeof(*ndp_in_sz), GFP_KERNEL);
+ if (!ndp_in_sz) {
+ err = -ENOMEM;
+ goto size_err;
+ }
+
+ err = usb_control_msg(ctx->udev,
+ usb_sndctrlpipe(ctx->udev, 0),
+ USB_CDC_SET_NTB_INPUT_SIZE,
+ USB_TYPE_CLASS | USB_DIR_OUT
+ | USB_RECIP_INTERFACE,
+ 0, iface_no, ndp_in_sz, 8, 1000);
+ kfree(ndp_in_sz);
+ } else {
+ __le32 *dwNtbInMaxSize;
+ dwNtbInMaxSize = kzalloc(sizeof(*dwNtbInMaxSize),
+ GFP_KERNEL);
+ if (!dwNtbInMaxSize) {
+ err = -ENOMEM;
+ goto size_err;
+ }
+ *dwNtbInMaxSize = cpu_to_le32(ctx->rx_max);
+
+ err = usb_control_msg(ctx->udev,
+ usb_sndctrlpipe(ctx->udev, 0),
+ USB_CDC_SET_NTB_INPUT_SIZE,
+ USB_TYPE_CLASS | USB_DIR_OUT
+ | USB_RECIP_INTERFACE,
+ 0, iface_no, dwNtbInMaxSize, 4, 1000);
+ kfree(dwNtbInMaxSize);
+ }
+size_err:
if (err < 0)
pr_debug("Setting NTB Input Size failed\n");
}
@@ -325,19 +342,29 @@
/* set Max Datagram Size (MTU) */
if (flags & USB_CDC_NCM_NCAP_MAX_DATAGRAM_SIZE) {
- __le16 max_datagram_size;
+ __le16 *max_datagram_size;
u16 eth_max_sz = le16_to_cpu(ctx->ether_desc->wMaxSegmentSize);
+
+ max_datagram_size = kzalloc(sizeof(*max_datagram_size),
+ GFP_KERNEL);
+ if (!max_datagram_size) {
+ err = -ENOMEM;
+ goto max_dgram_err;
+ }
+
err = usb_control_msg(ctx->udev, usb_rcvctrlpipe(ctx->udev, 0),
USB_CDC_GET_MAX_DATAGRAM_SIZE,
USB_TYPE_CLASS | USB_DIR_IN
| USB_RECIP_INTERFACE,
- 0, iface_no, &max_datagram_size,
+ 0, iface_no, max_datagram_size,
2, 1000);
if (err < 0) {
pr_debug("GET_MAX_DATAGRAM_SIZE failed, use size=%u\n",
CDC_NCM_MIN_DATAGRAM_SIZE);
+ kfree(max_datagram_size);
} else {
- ctx->max_datagram_size = le16_to_cpu(max_datagram_size);
+ ctx->max_datagram_size =
+ le16_to_cpu(*max_datagram_size);
/* Check Eth descriptor value */
if (eth_max_sz < CDC_NCM_MAX_DATAGRAM_SIZE) {
if (ctx->max_datagram_size > eth_max_sz)
@@ -360,8 +387,10 @@
USB_TYPE_CLASS | USB_DIR_OUT
| USB_RECIP_INTERFACE,
0,
- iface_no, &max_datagram_size,
+ iface_no, max_datagram_size,
2, 1000);
+ kfree(max_datagram_size);
+max_dgram_err:
if (err < 0)
pr_debug("SET_MAX_DATAGRAM_SIZE failed\n");
}
