[ACPI] delete CONFIG_ACPI_BUS
it is a synonym for CONFIG_ACPI
Signed-off-by: Len Brown <len.brown@intel.com>
diff --git a/arch/i386/defconfig b/arch/i386/defconfig
index f137a32..1a38785 100644
--- a/arch/i386/defconfig
+++ b/arch/i386/defconfig
@@ -142,7 +142,6 @@
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_DEBUG is not set
-CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
diff --git a/arch/i386/kernel/acpi/boot.c b/arch/i386/kernel/acpi/boot.c
index 84befae..552fc856 100644
--- a/arch/i386/kernel/acpi/boot.c
+++ b/arch/i386/kernel/acpi/boot.c
@@ -408,8 +408,6 @@
#endif /* CONFIG_X86_IO_APIC */
-#ifdef CONFIG_ACPI_BUS
-
/*
* acpi_pic_sci_set_trigger()
*
@@ -460,8 +458,6 @@
outb(new >> 8, 0x4d1);
}
-#endif /* CONFIG_ACPI_BUS */
-
int acpi_gsi_to_irq(u32 gsi, unsigned int *irq)
{
#ifdef CONFIG_X86_IO_APIC
@@ -637,12 +633,10 @@
/* initialize sci_int early for INT_SRC_OVR MADT parsing */
acpi_fadt.sci_int = fadt->sci_int;
-#ifdef CONFIG_ACPI_BUS
/* initialize rev and apic_phys_dest_mode for x86_64 genapic */
acpi_fadt.revision = fadt->revision;
acpi_fadt.force_apic_physical_destination_mode =
fadt->force_apic_physical_destination_mode;
-#endif
#ifdef CONFIG_X86_PM_TIMER
/* detect the location of the ACPI PM Timer */
diff --git a/arch/i386/kernel/mpparse.c b/arch/i386/kernel/mpparse.c
index db90d14..97dbf28 100644
--- a/arch/i386/kernel/mpparse.c
+++ b/arch/i386/kernel/mpparse.c
@@ -1069,11 +1069,9 @@
*/
static int gsi_to_irq[MAX_GSI_NUM];
-#ifdef CONFIG_ACPI_BUS
/* Don't set up the ACPI SCI because it's already set up */
if (acpi_fadt.sci_int == gsi)
return gsi;
-#endif
ioapic = mp_find_ioapic(gsi);
if (ioapic < 0) {
@@ -1116,13 +1114,11 @@
if (gsi < MAX_GSI_NUM) {
if (gsi > 15)
gsi = pci_irq++;
-#ifdef CONFIG_ACPI_BUS
/*
* Don't assign IRQ used by ACPI SCI
*/
if (gsi == acpi_fadt.sci_int)
gsi = pci_irq++;
-#endif
gsi_to_irq[irq] = gsi;
} else {
printk(KERN_ERR "GSI %u is too high\n", gsi);
diff --git a/arch/ia64/configs/bigsur_defconfig b/arch/ia64/configs/bigsur_defconfig
index 2c3ba6a..996144e 100644
--- a/arch/ia64/configs/bigsur_defconfig
+++ b/arch/ia64/configs/bigsur_defconfig
@@ -114,7 +114,6 @@
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
-CONFIG_ACPI_BUS=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
diff --git a/arch/ia64/configs/sn2_defconfig b/arch/ia64/configs/sn2_defconfig
index 6a0c114..4644ebe 100644
--- a/arch/ia64/configs/sn2_defconfig
+++ b/arch/ia64/configs/sn2_defconfig
@@ -138,7 +138,6 @@
CONFIG_ACPI_NUMA=y
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
-CONFIG_ACPI_BUS=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
diff --git a/arch/ia64/configs/tiger_defconfig b/arch/ia64/configs/tiger_defconfig
index dec24a6..f5fa113 100644
--- a/arch/ia64/configs/tiger_defconfig
+++ b/arch/ia64/configs/tiger_defconfig
@@ -137,7 +137,6 @@
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
-CONFIG_ACPI_BUS=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
diff --git a/arch/ia64/configs/zx1_defconfig b/arch/ia64/configs/zx1_defconfig
index d318087..1e6d286 100644
--- a/arch/ia64/configs/zx1_defconfig
+++ b/arch/ia64/configs/zx1_defconfig
@@ -136,7 +136,6 @@
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
-CONFIG_ACPI_BUS=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
diff --git a/arch/ia64/defconfig b/arch/ia64/defconfig
index e6d34df..163ef12 100644
--- a/arch/ia64/defconfig
+++ b/arch/ia64/defconfig
@@ -127,7 +127,6 @@
CONFIG_ACPI_NUMA=y
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
-CONFIG_ACPI_BUS=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
diff --git a/arch/x86_64/defconfig b/arch/x86_64/defconfig
index 8ccb4a1..62abdc0a 100644
--- a/arch/x86_64/defconfig
+++ b/arch/x86_64/defconfig
@@ -149,7 +149,6 @@
CONFIG_ACPI_TOSHIBA=y
CONFIG_ACPI_BLACKLIST_YEAR=2001
# CONFIG_ACPI_DEBUG is not set
-CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
diff --git a/arch/x86_64/kernel/genapic.c b/arch/x86_64/kernel/genapic.c
index 30c843a..f031358 100644
--- a/arch/x86_64/kernel/genapic.c
+++ b/arch/x86_64/kernel/genapic.c
@@ -20,7 +20,7 @@
#include <asm/smp.h>
#include <asm/ipi.h>
-#if defined(CONFIG_ACPI_BUS)
+#if defined(CONFIG_ACPI)
#include <acpi/acpi_bus.h>
#endif
@@ -47,7 +47,7 @@
u8 cluster_cnt[NUM_APIC_CLUSTERS];
int num_cpus = 0;
-#if defined(CONFIG_ACPI_BUS)
+#if defined(CONFIG_ACPI)
/*
* Some x86_64 machines use physical APIC mode regardless of how many
* procs/clusters are present (x86_64 ES7000 is an example).
diff --git a/arch/x86_64/kernel/mpparse.c b/arch/x86_64/kernel/mpparse.c
index 86445f3..8d8ed6a 100644
--- a/arch/x86_64/kernel/mpparse.c
+++ b/arch/x86_64/kernel/mpparse.c
@@ -927,11 +927,9 @@
if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC)
return gsi;
-#ifdef CONFIG_ACPI_BUS
/* Don't set up the ACPI SCI because it's already set up */
if (acpi_fadt.sci_int == gsi)
return gsi;
-#endif
ioapic = mp_find_ioapic(gsi);
if (ioapic < 0) {
@@ -971,13 +969,11 @@
if (gsi < MAX_GSI_NUM) {
if (gsi > 15)
gsi = pci_irq++;
-#ifdef CONFIG_ACPI_BUS
/*
* Don't assign IRQ used by ACPI SCI
*/
if (gsi == acpi_fadt.sci_int)
gsi = pci_irq++;
-#endif
gsi_to_irq[irq] = gsi;
} else {
printk(KERN_ERR "GSI %u is too high\n", gsi);
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index f023a88..8cafa4a 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -267,10 +267,6 @@
of verbosity. Saying Y enables these statements. This will increase
your kernel size by around 50K.
-config ACPI_BUS
- bool
- default y
-
config ACPI_EC
bool
depends on X86
diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
index 060afaf..b6a3c919 100644
--- a/drivers/acpi/Makefile
+++ b/drivers/acpi/Makefile
@@ -35,8 +35,8 @@
processor-objs += processor_perflib.o
endif
-obj-$(CONFIG_ACPI_BUS) += sleep/
-obj-$(CONFIG_ACPI_BUS) += bus.o glue.o
+obj-y += sleep/
+obj-y += bus.o glue.o
obj-$(CONFIG_ACPI_AC) += ac.o
obj-$(CONFIG_ACPI_BATTERY) += battery.o
obj-$(CONFIG_ACPI_BUTTON) += button.o
@@ -55,5 +55,5 @@
obj-$(CONFIG_ACPI_ASUS) += asus_acpi.o
obj-$(CONFIG_ACPI_IBM) += ibm_acpi.o
obj-$(CONFIG_ACPI_TOSHIBA) += toshiba_acpi.o
-obj-$(CONFIG_ACPI_BUS) += scan.o motherboard.o
+obj-y += scan.o motherboard.o
obj-$(CONFIG_ACPI_HOTPLUG_MEMORY) += acpi_memhotplug.o
diff --git a/drivers/char/tpm/Kconfig b/drivers/char/tpm/Kconfig
index 79e9832e..b58adfe 100644
--- a/drivers/char/tpm/Kconfig
+++ b/drivers/char/tpm/Kconfig
@@ -17,7 +17,7 @@
obtained at: <http://sourceforge.net/projects/trousers>. To
compile this driver as a module, choose M here; the module
will be called tpm. If unsure, say N.
- Note: For more TPM drivers enable CONFIG_PNP, CONFIG_ACPI_BUS
+ Note: For more TPM drivers enable CONFIG_PNP, CONFIG_ACPI
and CONFIG_PNPACPI.
config TCG_NSC
diff --git a/drivers/pci/hotplug/Kconfig b/drivers/pci/hotplug/Kconfig
index 9c4a39e..2f1289e 100644
--- a/drivers/pci/hotplug/Kconfig
+++ b/drivers/pci/hotplug/Kconfig
@@ -78,7 +78,7 @@
config HOTPLUG_PCI_ACPI
tristate "ACPI PCI Hotplug driver"
- depends on ACPI_BUS && HOTPLUG_PCI
+ depends on ACPI && HOTPLUG_PCI
help
Say Y here if you have a system that supports PCI Hotplug using
ACPI.
@@ -157,7 +157,7 @@
config HOTPLUG_PCI_SHPC_PHPRM_LEGACY
bool "For AMD SHPC only: Use $HRT for resource/configuration"
- depends on HOTPLUG_PCI_SHPC && !ACPI_BUS
+ depends on HOTPLUG_PCI_SHPC && !ACPI
help
Say Y here for AMD SHPC. You have to select this option if you are
using this driver on platform with AMD SHPC.
diff --git a/drivers/pci/hotplug/Makefile b/drivers/pci/hotplug/Makefile
index 31a3070..246586a 100644
--- a/drivers/pci/hotplug/Makefile
+++ b/drivers/pci/hotplug/Makefile
@@ -51,7 +51,7 @@
pciehp_ctrl.o \
pciehp_pci.o \
pciehp_hpc.o
-ifdef CONFIG_ACPI_BUS
+ifdef CONFIG_ACPI
pciehp-objs += pciehprm_acpi.o
else
pciehp-objs += pciehprm_nonacpi.o
@@ -62,7 +62,7 @@
shpchp_pci.o \
shpchp_sysfs.o \
shpchp_hpc.o
-ifdef CONFIG_ACPI_BUS
+ifdef CONFIG_ACPI
shpchp-objs += shpchprm_acpi.o
else
ifdef CONFIG_HOTPLUG_PCI_SHPC_PHPRM_LEGACY
diff --git a/drivers/pnp/Kconfig b/drivers/pnp/Kconfig
index 6776308..c514320 100644
--- a/drivers/pnp/Kconfig
+++ b/drivers/pnp/Kconfig
@@ -6,7 +6,7 @@
config PNP
bool "Plug and Play support"
- depends on ISA || ACPI_BUS
+ depends on ISA || ACPI
---help---
Plug and Play (PnP) is a standard for peripherals which allows those
peripherals to be configured by software, e.g. assign IRQ's or other
diff --git a/drivers/pnp/pnpacpi/Kconfig b/drivers/pnp/pnpacpi/Kconfig
index 0782cdc..b1854171b 100644
--- a/drivers/pnp/pnpacpi/Kconfig
+++ b/drivers/pnp/pnpacpi/Kconfig
@@ -3,7 +3,7 @@
#
config PNPACPI
bool "Plug and Play ACPI support (EXPERIMENTAL)"
- depends on PNP && ACPI_BUS && EXPERIMENTAL
+ depends on PNP && ACPI && EXPERIMENTAL
default y
---help---
Linux uses the PNPACPI to autodetect built-in
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 97034d3..56de409 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -80,7 +80,7 @@
config SERIAL_8250_ACPI
bool "8250/16550 device discovery via ACPI namespace"
default y if IA64
- depends on ACPI_BUS && SERIAL_8250
+ depends on ACPI && SERIAL_8250
---help---
If you wish to enable serial port discovery via the ACPI
namespace, say Y here. If unsure, say N.
diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h
index 4f4b2ba..0b54e9a 100644
--- a/include/acpi/acpi_bus.h
+++ b/include/acpi/acpi_bus.h
@@ -53,7 +53,7 @@
struct acpi_object_list *arguments,
struct acpi_handle_list *list);
-#ifdef CONFIG_ACPI_BUS
+#ifdef CONFIG_ACPI
#include <linux/proc_fs.h>
@@ -356,6 +356,6 @@
acpi_handle acpi_get_pci_rootbridge_handle(unsigned int, unsigned int);
#define DEVICE_ACPI_HANDLE(dev) ((acpi_handle)((dev)->firmware_data))
-#endif /*CONFIG_ACPI_BUS */
+#endif /* CONFIG_ACPI */
#endif /*__ACPI_BUS_H__*/
