// SPDX-License-Identifier: GPL-2.0-only
/*
 * Copyright (c) 2007 Ben Dooks
 * Copyright (c) 2008 Simtec Electronics
 *     Ben Dooks <ben@simtec.co.uk>, <ben-linux@fluff.org>
 * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
 * Copyright (c) 2017 Samsung Electronics Co., Ltd.
 *
 * PWM driver for Samsung SoCs
 */

#include <linux/bitops.h>
#include <linux/clk.h>
#include <linux/export.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/pwm.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/time.h>

/* For struct samsung_timer_variant and samsung_pwm_lock. */
#include <clocksource/samsung_pwm.h>

#define REG_TCFG0			0x00
#define REG_TCFG1			0x04
#define REG_TCON			0x08

#define REG_TCNTB(chan)			(0x0c + ((chan) * 0xc))
#define REG_TCMPB(chan)			(0x10 + ((chan) * 0xc))

#define TCFG0_PRESCALER_MASK		0xff
#define TCFG0_PRESCALER1_SHIFT		8

#define TCFG1_MUX_MASK			0xf
#define TCFG1_SHIFT(chan)		(4 * (chan))

/*
 * Each channel occupies 4 bits in TCON register, but there is a gap of 4
 * bits (one channel) after channel 0, so channels have different numbering
 * when accessing TCON register. See to_tcon_channel() function.
 *
 * In addition, the location of autoreload bit for channel 4 (TCON channel 5)
 * in its set of bits is 2 as opposed to 3 for other channels.
 */
#define TCON_START(chan)		BIT(4 * (chan) + 0)
#define TCON_MANUALUPDATE(chan)		BIT(4 * (chan) + 1)
#define TCON_INVERT(chan)		BIT(4 * (chan) + 2)
#define _TCON_AUTORELOAD(chan)		BIT(4 * (chan) + 3)
#define _TCON_AUTORELOAD4(chan)		BIT(4 * (chan) + 2)
#define TCON_AUTORELOAD(chan)		\
	((chan < 5) ? _TCON_AUTORELOAD(chan) : _TCON_AUTORELOAD4(chan))

/**
 * struct samsung_pwm_channel - private data of PWM channel
 * @period_ns:	current period in nanoseconds programmed to the hardware
 * @duty_ns:	current duty time in nanoseconds programmed to the hardware
 * @tin_ns:	time of one timer tick in nanoseconds with current timer rate
 */
struct samsung_pwm_channel {
	u32 period_ns;
	u32 duty_ns;
	u32 tin_ns;
};

/**
 * struct samsung_pwm_chip - private data of PWM chip
 * @variant:		local copy of hardware variant data
 * @inverter_mask:	inverter status for all channels - one bit per channel
 * @disabled_mask:	disabled status for all channels - one bit per channel
 * @base:		base address of mapped PWM registers
 * @base_clk:		base clock used to drive the timers
 * @tclk0:		external clock 0 (can be ERR_PTR if not present)
 * @tclk1:		external clock 1 (can be ERR_PTR if not present)
 * @channel:		per channel driver data
 */
struct samsung_pwm_chip {
	struct samsung_pwm_variant variant;
	u8 inverter_mask;
	u8 disabled_mask;

	void __iomem *base;
	struct clk *base_clk;
	struct clk *tclk0;
	struct clk *tclk1;
	struct samsung_pwm_channel channel[SAMSUNG_PWM_NUM];
};

#ifndef CONFIG_CLKSRC_SAMSUNG_PWM
/*
 * PWM block is shared between pwm-samsung and samsung_pwm_timer drivers
 * and some registers need access synchronization. If both drivers are
 * compiled in, the spinlock is defined in the clocksource driver,
 * otherwise following definition is used.
 *
 * Currently we do not need any more complex synchronization method
 * because all the supported SoCs contain only one instance of the PWM
 * IP. Should this change, both drivers will need to be modified to
 * properly synchronize accesses to particular instances.
 */
static DEFINE_SPINLOCK(samsung_pwm_lock);
#endif

static inline
struct samsung_pwm_chip *to_samsung_pwm_chip(struct pwm_chip *chip)
{
	return pwmchip_get_drvdata(chip);
}

static inline unsigned int to_tcon_channel(unsigned int channel)
{
	/* TCON register has a gap of 4 bits (1 channel) after channel 0 */
	return (channel == 0) ? 0 : (channel + 1);
}

static void __pwm_samsung_manual_update(struct samsung_pwm_chip *our_chip,
				      struct pwm_device *pwm)
{
	unsigned int tcon_chan = to_tcon_channel(pwm->hwpwm);
	u32 tcon;

	tcon = readl(our_chip->base + REG_TCON);
	tcon |= TCON_MANUALUPDATE(tcon_chan);
	writel(tcon, our_chip->base + REG_TCON);

	tcon &= ~TCON_MANUALUPDATE(tcon_chan);
	writel(tcon, our_chip->base + REG_TCON);
}

static void pwm_samsung_set_divisor(struct samsung_pwm_chip *our_chip,
				    unsigned int channel, u8 divisor)
{
	u8 shift = TCFG1_SHIFT(channel);
	unsigned long flags;
	u32 reg;
	u8 bits;

	bits = (fls(divisor) - 1) - our_chip->variant.div_base;

	spin_lock_irqsave(&samsung_pwm_lock, flags);

	reg = readl(our_chip->base + REG_TCFG1);
	reg &= ~(TCFG1_MUX_MASK << shift);
	reg |= bits << shift;
	writel(reg, our_chip->base + REG_TCFG1);

	spin_unlock_irqrestore(&samsung_pwm_lock, flags);
}

static int pwm_samsung_is_tdiv(struct samsung_pwm_chip *our_chip, unsigned int chan)
{
	struct samsung_pwm_variant *variant = &our_chip->variant;
	u32 reg;

	reg = readl(our_chip->base + REG_TCFG1);
	reg >>= TCFG1_SHIFT(chan);
	reg &= TCFG1_MUX_MASK;

	return (BIT(reg) & variant->tclk_mask) == 0;
}

static unsigned long pwm_samsung_get_tin_rate(struct samsung_pwm_chip *our_chip,
					      unsigned int chan)
{
	unsigned long rate;
	u32 reg;

	rate = clk_get_rate(our_chip->base_clk);

	reg = readl(our_chip->base + REG_TCFG0);
	if (chan >= 2)
		reg >>= TCFG0_PRESCALER1_SHIFT;
	reg &= TCFG0_PRESCALER_MASK;

	return rate / (reg + 1);
}

static unsigned long pwm_samsung_calc_tin(struct pwm_chip *chip,
					  unsigned int chan, unsigned long freq)
{
	struct samsung_pwm_chip *our_chip = to_samsung_pwm_chip(chip);
	struct samsung_pwm_variant *variant = &our_chip->variant;
	unsigned long rate;
	struct clk *clk;
	u8 div;

	if (!pwm_samsung_is_tdiv(our_chip, chan)) {
		clk = (chan < 2) ? our_chip->tclk0 : our_chip->tclk1;
		if (!IS_ERR(clk)) {
			rate = clk_get_rate(clk);
			if (rate)
				return rate;
		}

		dev_warn(pwmchip_parent(chip),
			"tclk of PWM %d is inoperational, using tdiv\n", chan);
	}

	rate = pwm_samsung_get_tin_rate(our_chip, chan);
	dev_dbg(pwmchip_parent(chip), "tin parent at %lu\n", rate);

	/*
	 * Compare minimum PWM frequency that can be achieved with possible
	 * divider settings and choose the lowest divisor that can generate
	 * frequencies lower than requested.
	 */
	if (variant->bits < 32) {
		/* Only for s3c24xx */
		for (div = variant->div_base; div < 4; ++div)
			if ((rate >> (variant->bits + div)) < freq)
				break;
	} else {
		/*
		 * Other variants have enough counter bits to generate any
		 * requested rate, so no need to check higher divisors.
		 */
		div = variant->div_base;
	}

	pwm_samsung_set_divisor(our_chip, chan, BIT(div));

	return rate >> div;
}

static int pwm_samsung_request(struct pwm_chip *chip, struct pwm_device *pwm)
{
	struct samsung_pwm_chip *our_chip = to_samsung_pwm_chip(chip);

	if (!(our_chip->variant.output_mask & BIT(pwm->hwpwm))) {
		dev_warn(pwmchip_parent(chip),
			"tried to request PWM channel %d without output\n",
			pwm->hwpwm);
		return -EINVAL;
	}

	memset(&our_chip->channel[pwm->hwpwm], 0, sizeof(our_chip->channel[pwm->hwpwm]));

	return 0;
}

static int pwm_samsung_enable(struct pwm_chip *chip, struct pwm_device *pwm)
{
	struct samsung_pwm_chip *our_chip = to_samsung_pwm_chip(chip);
	unsigned int tcon_chan = to_tcon_channel(pwm->hwpwm);
	unsigned long flags;
	u32 tcon;

	spin_lock_irqsave(&samsung_pwm_lock, flags);

	tcon = readl(our_chip->base + REG_TCON);

	tcon &= ~TCON_START(tcon_chan);
	tcon |= TCON_MANUALUPDATE(tcon_chan);
	writel(tcon, our_chip->base + REG_TCON);

	tcon &= ~TCON_MANUALUPDATE(tcon_chan);
	tcon |= TCON_START(tcon_chan) | TCON_AUTORELOAD(tcon_chan);
	writel(tcon, our_chip->base + REG_TCON);

	our_chip->disabled_mask &= ~BIT(pwm->hwpwm);

	spin_unlock_irqrestore(&samsung_pwm_lock, flags);

	return 0;
}

static void pwm_samsung_disable(struct pwm_chip *chip, struct pwm_device *pwm)
{
	struct samsung_pwm_chip *our_chip = to_samsung_pwm_chip(chip);
	unsigned int tcon_chan = to_tcon_channel(pwm->hwpwm);
	unsigned long flags;
	u32 tcon;

	spin_lock_irqsave(&samsung_pwm_lock, flags);

	tcon = readl(our_chip->base + REG_TCON);
	tcon &= ~TCON_AUTORELOAD(tcon_chan);
	writel(tcon, our_chip->base + REG_TCON);

	/*
	 * In case the PWM is at 100% duty cycle, force a manual
	 * update to prevent the signal from staying high.
	 */
	if (readl(our_chip->base + REG_TCMPB(pwm->hwpwm)) == (u32)-1U)
		__pwm_samsung_manual_update(our_chip, pwm);

	our_chip->disabled_mask |= BIT(pwm->hwpwm);

	spin_unlock_irqrestore(&samsung_pwm_lock, flags);
}

static void pwm_samsung_manual_update(struct samsung_pwm_chip *our_chip,
				      struct pwm_device *pwm)
{
	unsigned long flags;

	spin_lock_irqsave(&samsung_pwm_lock, flags);

	__pwm_samsung_manual_update(our_chip, pwm);

	spin_unlock_irqrestore(&samsung_pwm_lock, flags);
}

static int __pwm_samsung_config(struct pwm_chip *chip, struct pwm_device *pwm,
				int duty_ns, int period_ns, bool force_period)
{
	struct samsung_pwm_chip *our_chip = to_samsung_pwm_chip(chip);
	struct samsung_pwm_channel *chan = &our_chip->channel[pwm->hwpwm];
	u32 tin_ns = chan->tin_ns, tcnt, tcmp, oldtcmp;

	tcnt = readl(our_chip->base + REG_TCNTB(pwm->hwpwm));
	oldtcmp = readl(our_chip->base + REG_TCMPB(pwm->hwpwm));

	/* We need tick count for calculation, not last tick. */
	++tcnt;

	/* Check to see if we are changing the clock rate of the PWM. */
	if (chan->period_ns != period_ns || force_period) {
		unsigned long tin_rate;
		u32 period;

		period = NSEC_PER_SEC / period_ns;

		dev_dbg(pwmchip_parent(chip), "duty_ns=%d, period_ns=%d (%u)\n",
						duty_ns, period_ns, period);

		tin_rate = pwm_samsung_calc_tin(chip, pwm->hwpwm, period);

		dev_dbg(pwmchip_parent(chip), "tin_rate=%lu\n", tin_rate);

		tin_ns = NSEC_PER_SEC / tin_rate;
		tcnt = period_ns / tin_ns;
	}

	/* Period is too short. */
	if (tcnt <= 1)
		return -ERANGE;

	/* Note that counters count down. */
	tcmp = duty_ns / tin_ns;

	/* 0% duty is not available */
	if (!tcmp)
		++tcmp;

	tcmp = tcnt - tcmp;

	/* Decrement to get tick numbers, instead of tick counts. */
	--tcnt;
	/* -1UL will give 100% duty. */
	--tcmp;

	dev_dbg(pwmchip_parent(chip), "tin_ns=%u, tcmp=%u/%u\n", tin_ns, tcmp, tcnt);

	/* Update PWM registers. */
	writel(tcnt, our_chip->base + REG_TCNTB(pwm->hwpwm));
	writel(tcmp, our_chip->base + REG_TCMPB(pwm->hwpwm));

	/*
	 * In case the PWM is currently at 100% duty cycle, force a manual
	 * update to prevent the signal staying high if the PWM is disabled
	 * shortly afer this update (before it autoreloaded the new values).
	 */
	if (oldtcmp == (u32) -1) {
		dev_dbg(pwmchip_parent(chip), "Forcing manual update");
		pwm_samsung_manual_update(our_chip, pwm);
	}

	chan->period_ns = period_ns;
	chan->tin_ns = tin_ns;
	chan->duty_ns = duty_ns;

	return 0;
}

static int pwm_samsung_config(struct pwm_chip *chip, struct pwm_device *pwm,
			      int duty_ns, int period_ns)
{
	return __pwm_samsung_config(chip, pwm, duty_ns, period_ns, false);
}

static void pwm_samsung_set_invert(struct samsung_pwm_chip *our_chip,
				   unsigned int channel, bool invert)
{
	unsigned int tcon_chan = to_tcon_channel(channel);
	unsigned long flags;
	u32 tcon;

	spin_lock_irqsave(&samsung_pwm_lock, flags);

	tcon = readl(our_chip->base + REG_TCON);

	if (invert) {
		our_chip->inverter_mask |= BIT(channel);
		tcon |= TCON_INVERT(tcon_chan);
	} else {
		our_chip->inverter_mask &= ~BIT(channel);
		tcon &= ~TCON_INVERT(tcon_chan);
	}

	writel(tcon, our_chip->base + REG_TCON);

	spin_unlock_irqrestore(&samsung_pwm_lock, flags);
}

static int pwm_samsung_set_polarity(struct pwm_chip *chip,
				    struct pwm_device *pwm,
				    enum pwm_polarity polarity)
{
	struct samsung_pwm_chip *our_chip = to_samsung_pwm_chip(chip);
	bool invert = (polarity == PWM_POLARITY_NORMAL);

	/* Inverted means normal in the hardware. */
	pwm_samsung_set_invert(our_chip, pwm->hwpwm, invert);

	return 0;
}

static int pwm_samsung_apply(struct pwm_chip *chip, struct pwm_device *pwm,
			     const struct pwm_state *state)
{
	int err, enabled = pwm->state.enabled;

	if (state->polarity != pwm->state.polarity) {
		if (enabled) {
			pwm_samsung_disable(chip, pwm);
			enabled = false;
		}

		err = pwm_samsung_set_polarity(chip, pwm, state->polarity);
		if (err)
			return err;
	}

	if (!state->enabled) {
		if (enabled)
			pwm_samsung_disable(chip, pwm);

		return 0;
	}

	/*
	 * We currently avoid using 64bit arithmetic by using the
	 * fact that anything faster than 1Hz is easily representable
	 * by 32bits.
	 */
	if (state->period > NSEC_PER_SEC)
		return -ERANGE;

	err = pwm_samsung_config(chip, pwm, state->duty_cycle, state->period);
	if (err)
		return err;

	if (!pwm->state.enabled)
		err = pwm_samsung_enable(chip, pwm);

	return err;
}

static const struct pwm_ops pwm_samsung_ops = {
	.request	= pwm_samsung_request,
	.apply		= pwm_samsung_apply,
};

#ifdef CONFIG_OF
static const struct samsung_pwm_variant s3c24xx_variant = {
	.bits		= 16,
	.div_base	= 1,
	.has_tint_cstat	= false,
	.tclk_mask	= BIT(4),
};

static const struct samsung_pwm_variant s3c64xx_variant = {
	.bits		= 32,
	.div_base	= 0,
	.has_tint_cstat	= true,
	.tclk_mask	= BIT(7) | BIT(6) | BIT(5),
};

static const struct samsung_pwm_variant s5p64x0_variant = {
	.bits		= 32,
	.div_base	= 0,
	.has_tint_cstat	= true,
	.tclk_mask	= 0,
};

static const struct samsung_pwm_variant s5pc100_variant = {
	.bits		= 32,
	.div_base	= 0,
	.has_tint_cstat	= true,
	.tclk_mask	= BIT(5),
};

static const struct of_device_id samsung_pwm_matches[] = {
	{ .compatible = "samsung,s3c2410-pwm", .data = &s3c24xx_variant },
	{ .compatible = "samsung,s3c6400-pwm", .data = &s3c64xx_variant },
	{ .compatible = "samsung,s5p6440-pwm", .data = &s5p64x0_variant },
	{ .compatible = "samsung,s5pc100-pwm", .data = &s5pc100_variant },
	{ .compatible = "samsung,exynos4210-pwm", .data = &s5p64x0_variant },
	{},
};
MODULE_DEVICE_TABLE(of, samsung_pwm_matches);

static int pwm_samsung_parse_dt(struct pwm_chip *chip)
{
	struct samsung_pwm_chip *our_chip = to_samsung_pwm_chip(chip);
	struct device_node *np = pwmchip_parent(chip)->of_node;
	const struct of_device_id *match;
	u32 val;

	match = of_match_node(samsung_pwm_matches, np);
	if (!match)
		return -ENODEV;

	memcpy(&our_chip->variant, match->data, sizeof(our_chip->variant));

	of_property_for_each_u32(np, "samsung,pwm-outputs", val) {
		if (val >= SAMSUNG_PWM_NUM) {
			dev_err(pwmchip_parent(chip),
				"%s: invalid channel index in samsung,pwm-outputs property\n",
								__func__);
			continue;
		}
		our_chip->variant.output_mask |= BIT(val);
	}

	return 0;
}
#else
static int pwm_samsung_parse_dt(struct pwm_chip *chip)
{
	return -ENODEV;
}
#endif

static int pwm_samsung_probe(struct platform_device *pdev)
{
	struct device *dev = &pdev->dev;
	struct samsung_pwm_chip *our_chip;
	struct pwm_chip *chip;
	unsigned int chan;
	int ret;

	chip = devm_pwmchip_alloc(&pdev->dev, SAMSUNG_PWM_NUM, sizeof(*our_chip));
	if (IS_ERR(chip))
		return PTR_ERR(chip);
	our_chip = to_samsung_pwm_chip(chip);

	chip->ops = &pwm_samsung_ops;
	our_chip->inverter_mask = BIT(SAMSUNG_PWM_NUM) - 1;

	if (IS_ENABLED(CONFIG_OF) && pdev->dev.of_node) {
		ret = pwm_samsung_parse_dt(chip);
		if (ret)
			return ret;
	} else {
		if (!pdev->dev.platform_data)
			return dev_err_probe(&pdev->dev, -EINVAL,
					     "no platform data specified\n");

		memcpy(&our_chip->variant, pdev->dev.platform_data,
							sizeof(our_chip->variant));
	}

	our_chip->base = devm_platform_ioremap_resource(pdev, 0);
	if (IS_ERR(our_chip->base))
		return PTR_ERR(our_chip->base);

	our_chip->base_clk = devm_clk_get_enabled(&pdev->dev, "timers");
	if (IS_ERR(our_chip->base_clk))
		return dev_err_probe(dev, PTR_ERR(our_chip->base_clk),
				     "failed to get timer base clk\n");

	for (chan = 0; chan < SAMSUNG_PWM_NUM; ++chan)
		if (our_chip->variant.output_mask & BIT(chan))
			pwm_samsung_set_invert(our_chip, chan, true);

	/* Following clocks are optional. */
	our_chip->tclk0 = devm_clk_get(&pdev->dev, "pwm-tclk0");
	our_chip->tclk1 = devm_clk_get(&pdev->dev, "pwm-tclk1");

	platform_set_drvdata(pdev, chip);

	ret = devm_pwmchip_add(&pdev->dev, chip);
	if (ret < 0)
		return dev_err_probe(dev, ret, "failed to register PWM chip\n");

	dev_dbg(dev, "base_clk at %lu, tclk0 at %lu, tclk1 at %lu\n",
		clk_get_rate(our_chip->base_clk),
		!IS_ERR(our_chip->tclk0) ? clk_get_rate(our_chip->tclk0) : 0,
		!IS_ERR(our_chip->tclk1) ? clk_get_rate(our_chip->tclk1) : 0);

	return 0;
}

static int pwm_samsung_resume(struct device *dev)
{
	struct pwm_chip *chip = dev_get_drvdata(dev);
	struct samsung_pwm_chip *our_chip = to_samsung_pwm_chip(chip);
	unsigned int i;

	for (i = 0; i < SAMSUNG_PWM_NUM; i++) {
		struct pwm_device *pwm = &chip->pwms[i];
		struct samsung_pwm_channel *chan = &our_chip->channel[i];

		if (!test_bit(PWMF_REQUESTED, &pwm->flags))
			continue;

		if (our_chip->variant.output_mask & BIT(i))
			pwm_samsung_set_invert(our_chip, i,
					our_chip->inverter_mask & BIT(i));

		if (chan->period_ns) {
			__pwm_samsung_config(chip, pwm, chan->duty_ns,
					     chan->period_ns, true);
			/* needed to make PWM disable work on Odroid-XU3 */
			pwm_samsung_manual_update(our_chip, pwm);
		}

		if (our_chip->disabled_mask & BIT(i))
			pwm_samsung_disable(chip, pwm);
		else
			pwm_samsung_enable(chip, pwm);
	}

	return 0;
}

static DEFINE_SIMPLE_DEV_PM_OPS(pwm_samsung_pm_ops, NULL, pwm_samsung_resume);

static struct platform_driver pwm_samsung_driver = {
	.driver		= {
		.name	= "samsung-pwm",
		.pm	= pm_ptr(&pwm_samsung_pm_ops),
		.of_match_table = of_match_ptr(samsung_pwm_matches),
	},
	.probe		= pwm_samsung_probe,
};
module_platform_driver(pwm_samsung_driver);

MODULE_DESCRIPTION("Samsung Pulse Width Modulator driver");
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Tomasz Figa <tomasz.figa@gmail.com>");
MODULE_ALIAS("platform:samsung-pwm");