memory: brcmstb: dpfe: use byte 3 of registers MR4-MR8
For dual-rank LPDDR4, result data for any command is placed in byte 0
and byte 3 of the corresponding MR register by the firmware.
Single-rank RAM was supposed to work the same way. However, due to a
firmware bug, result values are only placed in byte 3 of the
corresponding MR register.
Since byte 3 works for single-rank and dual-rank setups, we change the
Linux driver to always use byte 3, thus returning the correct value in
either case.
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
diff --git a/drivers/memory/brcmstb_dpfe.c b/drivers/memory/brcmstb_dpfe.c
index 1095c1d..fae3ac3 100644
--- a/drivers/memory/brcmstb_dpfe.c
+++ b/drivers/memory/brcmstb_dpfe.c
@@ -61,6 +61,7 @@
#define DRAM_INFO_MR4 0x4
#define DRAM_INFO_ERROR 0x8
#define DRAM_INFO_MR4_MASK 0xff
+#define DRAM_INFO_MR4_SHIFT 24 /* We need to look at byte 3 */
/* DRAM MR4 Offsets & Masks */
#define DRAM_MR4_REFRESH 0x0 /* Refresh rate */
@@ -82,6 +83,7 @@
#define DRAM_VENDOR_MR8 0xc
#define DRAM_VENDOR_ERROR 0x10
#define DRAM_VENDOR_MASK 0xff
+#define DRAM_VENDOR_SHIFT 24 /* We need to look at byte 3 */
/* Reset register bits & masks */
#define DCPU_RESET_SHIFT 0x0
@@ -582,7 +584,8 @@ static ssize_t show_refresh(struct device *dev,
if (!info)
return ret;
- mr4 = readl_relaxed(info + DRAM_INFO_MR4) & DRAM_INFO_MR4_MASK;
+ mr4 = (readl_relaxed(info + DRAM_INFO_MR4) >> DRAM_INFO_MR4_SHIFT) &
+ DRAM_INFO_MR4_MASK;
refresh = (mr4 >> DRAM_MR4_REFRESH) & DRAM_MR4_REFRESH_MASK;
sr_abort = (mr4 >> DRAM_MR4_SR_ABORT) & DRAM_MR4_SR_ABORT_MASK;
@@ -630,6 +633,7 @@ static ssize_t show_vendor(struct device *dev, struct device_attribute *devattr,
struct private_data *priv;
void __iomem *info;
ssize_t ret;
+ u32 mr5, mr6, mr7, mr8, err;
priv = dev_get_drvdata(dev);
ret = generic_show(DPFE_CMD_GET_VENDOR, response, priv, buf);
@@ -640,13 +644,17 @@ static ssize_t show_vendor(struct device *dev, struct device_attribute *devattr,
if (!info)
return ret;
- return sprintf(buf, "%#x %#x %#x %#x %#x\n",
- readl_relaxed(info + DRAM_VENDOR_MR5) & DRAM_VENDOR_MASK,
- readl_relaxed(info + DRAM_VENDOR_MR6) & DRAM_VENDOR_MASK,
- readl_relaxed(info + DRAM_VENDOR_MR7) & DRAM_VENDOR_MASK,
- readl_relaxed(info + DRAM_VENDOR_MR8) & DRAM_VENDOR_MASK,
- readl_relaxed(info + DRAM_VENDOR_ERROR) &
- DRAM_VENDOR_MASK);
+ mr5 = (readl_relaxed(info + DRAM_VENDOR_MR5) >> DRAM_VENDOR_SHIFT) &
+ DRAM_VENDOR_MASK;
+ mr6 = (readl_relaxed(info + DRAM_VENDOR_MR6) >> DRAM_VENDOR_SHIFT) &
+ DRAM_VENDOR_MASK;
+ mr7 = (readl_relaxed(info + DRAM_VENDOR_MR7) >> DRAM_VENDOR_SHIFT) &
+ DRAM_VENDOR_MASK;
+ mr8 = (readl_relaxed(info + DRAM_VENDOR_MR8) >> DRAM_VENDOR_SHIFT) &
+ DRAM_VENDOR_MASK;
+ err = readl_relaxed(info + DRAM_VENDOR_ERROR) & DRAM_VENDOR_MASK;
+
+ return sprintf(buf, "%#x %#x %#x %#x %#x\n", mr5, mr6, mr7, mr8, err);
}
static int brcmstb_dpfe_resume(struct platform_device *pdev)
