diff --git a/drivers/bcma/main.c b/drivers/bcma/main.c
index febbc0a..ec31f7d 100644
--- a/drivers/bcma/main.c
+++ b/drivers/bcma/main.c
@@ -169,10 +169,8 @@
 	err = bcma_sprom_get(bus);
 	if (err == -ENOENT) {
 		pr_err("No SPROM available\n");
-	} else if (err) {
+	} else if (err)
 		pr_err("Failed to get SPROM: %d\n", err);
-		return -ENOENT;
-	}
 
 	/* Register found cores */
 	bcma_register_cores(bus);
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index ee77595..87db1ee 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -1037,13 +1037,16 @@
 
 	/*
 	 * Workaround for early ACK timeouts, add an offset to match the
-	 * initval's 64us ack timeout value.
+	 * initval's 64us ack timeout value. Use 48us for the CTS timeout.
 	 * This was initially only meant to work around an issue with delayed
 	 * BA frames in some implementations, but it has been found to fix ACK
 	 * timeout issues in other cases as well.
 	 */
-	if (conf->channel && conf->channel->band == IEEE80211_BAND_2GHZ)
+	if (conf->channel && conf->channel->band == IEEE80211_BAND_2GHZ) {
 		acktimeout += 64 - sifstime - ah->slottime;
+		ctstimeout += 48 - sifstime - ah->slottime;
+	}
+
 
 	ath9k_hw_set_sifs_time(ah, sifstime);
 	ath9k_hw_setslottime(ah, slottime);
diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index abf9435..53a005d 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -822,6 +822,11 @@
 		ARRAY_SIZE(ath9k_tpt_blink));
 #endif
 
+	INIT_WORK(&sc->hw_reset_work, ath_reset_work);
+	INIT_WORK(&sc->hw_check_work, ath_hw_check);
+	INIT_WORK(&sc->paprd_work, ath_paprd_calibrate);
+	INIT_DELAYED_WORK(&sc->hw_pll_work, ath_hw_pll_work);
+
 	/* Register with mac80211 */
 	error = ieee80211_register_hw(hw);
 	if (error)
@@ -840,10 +845,6 @@
 			goto error_world;
 	}
 
-	INIT_WORK(&sc->hw_reset_work, ath_reset_work);
-	INIT_WORK(&sc->hw_check_work, ath_hw_check);
-	INIT_WORK(&sc->paprd_work, ath_paprd_calibrate);
-	INIT_DELAYED_WORK(&sc->hw_pll_work, ath_hw_pll_work);
 	sc->last_rssi = ATH_RSSI_DUMMY_MARKER;
 
 	ath_init_leds(sc);
diff --git a/drivers/net/wireless/ath/ath9k/rc.c b/drivers/net/wireless/ath/ath9k/rc.c
index b3c3798..635b592 100644
--- a/drivers/net/wireless/ath/ath9k/rc.c
+++ b/drivers/net/wireless/ath/ath9k/rc.c
@@ -694,7 +694,7 @@
 		return rate;
 
 	/* This should not happen */
-	WARN_ON(1);
+	WARN_ON_ONCE(1);
 
 	rate = ath_rc_priv->valid_rate_index[0];
 
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index 0e666fb..7e1a91a 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -822,6 +822,14 @@
 		(ATH9K_RXERR_DECRYPT | ATH9K_RXERR_CRC | ATH9K_RXERR_MIC |
 		 ATH9K_RXERR_KEYMISS));
 
+	/*
+	 * Key miss events are only relevant for pairwise keys where the
+	 * descriptor does contain a valid key index. This has been observed
+	 * mostly with CCMP encryption.
+	 */
+	if (rx_stats->rs_keyix == ATH9K_RXKEYIX_INVALID)
+		rx_stats->rs_status &= ~ATH9K_RXERR_KEYMISS;
+
 	if (!rx_stats->rs_datalen)
 		return false;
         /*
diff --git a/drivers/net/wireless/mwifiex/init.c b/drivers/net/wireless/mwifiex/init.c
index e05b417..1d0ec57 100644
--- a/drivers/net/wireless/mwifiex/init.c
+++ b/drivers/net/wireless/mwifiex/init.c
@@ -382,7 +382,8 @@
 
 	adapter->if_ops.cleanup_if(adapter);
 
-	dev_kfree_skb_any(adapter->sleep_cfm);
+	if (adapter->sleep_cfm)
+		dev_kfree_skb_any(adapter->sleep_cfm);
 }
 
 /*
diff --git a/drivers/net/wireless/mwifiex/main.c b/drivers/net/wireless/mwifiex/main.c
index 84be196..b728f54 100644
--- a/drivers/net/wireless/mwifiex/main.c
+++ b/drivers/net/wireless/mwifiex/main.c
@@ -822,7 +822,9 @@
 			continue;
 
 		rtnl_lock();
-		mwifiex_del_virtual_intf(priv->wdev->wiphy, priv->netdev);
+		if (priv->wdev && priv->netdev)
+			mwifiex_del_virtual_intf(priv->wdev->wiphy,
+						 priv->netdev);
 		rtnl_unlock();
 	}
 
@@ -830,9 +832,11 @@
 	if (!priv)
 		goto exit_remove;
 
-	wiphy_unregister(priv->wdev->wiphy);
-	wiphy_free(priv->wdev->wiphy);
-	kfree(priv->wdev);
+	if (priv->wdev) {
+		wiphy_unregister(priv->wdev->wiphy);
+		wiphy_free(priv->wdev->wiphy);
+		kfree(priv->wdev);
+	}
 
 	mwifiex_terminate_workqueue(adapter);
 
diff --git a/drivers/net/wireless/mwifiex/sta_ioctl.c b/drivers/net/wireless/mwifiex/sta_ioctl.c
index 470ca75..b0fbf5d 100644
--- a/drivers/net/wireless/mwifiex/sta_ioctl.c
+++ b/drivers/net/wireless/mwifiex/sta_ioctl.c
@@ -54,7 +54,7 @@
 int mwifiex_wait_queue_complete(struct mwifiex_adapter *adapter)
 {
 	bool cancel_flag = false;
-	int status = adapter->cmd_wait_q.status;
+	int status;
 	struct cmd_ctrl_node *cmd_queued;
 
 	if (!adapter->cmd_queued)
@@ -79,6 +79,8 @@
 		mwifiex_cancel_pending_ioctl(adapter);
 		dev_dbg(adapter->dev, "cmd cancel\n");
 	}
+
+	status = adapter->cmd_wait_q.status;
 	adapter->cmd_wait_q.status = 0;
 
 	return status;
@@ -240,6 +242,8 @@
 
 		if (!netif_queue_stopped(priv->netdev))
 			mwifiex_stop_net_dev_queue(priv->netdev, adapter);
+		if (netif_carrier_ok(priv->netdev))
+			netif_carrier_off(priv->netdev);
 
 		/* Clear any past association response stored for
 		 * application retrieval */
@@ -271,6 +275,8 @@
 
 		if (!netif_queue_stopped(priv->netdev))
 			mwifiex_stop_net_dev_queue(priv->netdev, adapter);
+		if (netif_carrier_ok(priv->netdev))
+			netif_carrier_off(priv->netdev);
 
 		if (!ret) {
 			dev_dbg(adapter->dev, "info: network found in scan"
diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c
index 0a70149..98a574a 100644
--- a/drivers/net/wireless/zd1211rw/zd_mac.c
+++ b/drivers/net/wireless/zd1211rw/zd_mac.c
@@ -866,6 +866,14 @@
 
 	ZD_ASSERT(frag_len <= 0xffff);
 
+	/*
+	 * Firmware computes the duration itself (for all frames except PSPoll)
+	 * and needs the field set to 0 at input, otherwise firmware messes up
+	 * duration_id and sets bits 14 and 15 on.
+	 */
+	if (!ieee80211_is_pspoll(hdr->frame_control))
+		hdr->duration_id = 0;
+
 	txrate = ieee80211_get_tx_rate(mac->hw, info);
 
 	cs->modulation = txrate->hw_value;