drm/i915/skl: Work around incorrect BIOS WRPLL PDIV programming
The BIOS of at least one ASUS-Z170M system with an SKL I have programs
the 101b WRPLL PDIV divider value, which is the encoding for PDIV=7 with
bit#0 incorrectly set.
This happens with the
"3840x2160": 30 262750 3840 3888 3920 4000 2160 2163 2168 2191 0x48 0x9
HDMI mode (scaled from a 1024x768 src fb) set by BIOS and the
ref_clock=24000, dco_integer=383, dco_fraction=5802, pdiv=7, qdiv=1, kdiv=1
WRPLL parameters (assuming PDIV=7 was the intended setting). This
corresponds to 262749 PLL frequency/port clock.
Later the driver sets the same mode for which it calculates the same
dco_int/dco_frac/div WRPLL parameters (with the correct PDIV=7 encoding).
Based on the above, let's assume that PDIV=7 was intended and the HW
just ignores bit#0 in the PDIV register field for this setting, treating
100b and 101b encodings the same way.
While at it add the MISSING_CASE() for the p0,p2 divider decodings.
v2: (Ville)
- Add a define for the incorrect divider value.
- Emit only a debug message when detecting the incorrect divider value.
- Use fallthrough from the incorrect divider value case.
- Add the MISSING_CASE()s.
v3: Return 0 freq for incorrect divider values. (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201006013555.1488262-1-imre.deak@intel.com
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index ca97b36..6ad9ee4 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -10264,6 +10264,7 @@ enum skl_power_gate {
#define DPLL_CFGCR2_PDIV_2 (1 << 2)
#define DPLL_CFGCR2_PDIV_3 (2 << 2)
#define DPLL_CFGCR2_PDIV_7 (4 << 2)
+#define DPLL_CFGCR2_PDIV_7_INVALID (5 << 2)
#define DPLL_CFGCR2_CENTRAL_FREQ_MASK (3)
#define DPLL_CFGCR1(id) _MMIO_PIPE((id) - SKL_DPLL1, _DPLL1_CFGCR1, _DPLL2_CFGCR1)
