# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/sound/fsl,imx-asrc.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Freescale Asynchronous Sample Rate Converter (ASRC) Controller

description:
  The Asynchronous Sample Rate Converter (ASRC) converts the sampling rate of
  a signal associated with an input clock into a signal associated with a
  different output clock. The driver currently works as a Front End of DPCM
  with other Back Ends Audio controller such as ESAI, SSI and SAI. It has
  three pairs to support three substreams within totally 10 channels.

maintainers:
  - Shawn Guo <shawnguo@kernel.org>
  - Sascha Hauer <s.hauer@pengutronix.de>

properties:
  compatible:
    oneOf:
      - enum:
          - fsl,imx35-asrc
          - fsl,imx53-asrc
          - fsl,imx8qm-asrc
          - fsl,imx8qxp-asrc
      - items:
          - enum:
              - fsl,imx6sx-asrc
              - fsl,imx6ul-asrc
          - const: fsl,imx53-asrc

  reg:
    maxItems: 1

  interrupts:
    maxItems: 1

  dmas:
    maxItems: 6

  dma-names:
    items:
      - const: rxa
      - const: rxb
      - const: rxc
      - const: txa
      - const: txb
      - const: txc

  clocks:
    maxItems: 19

  clock-names:
    items:
      - const: mem
      - const: ipg
      - const: asrck_0
      - const: asrck_1
      - const: asrck_2
      - const: asrck_3
      - const: asrck_4
      - const: asrck_5
      - const: asrck_6
      - const: asrck_7
      - const: asrck_8
      - const: asrck_9
      - const: asrck_a
      - const: asrck_b
      - const: asrck_c
      - const: asrck_d
      - const: asrck_e
      - const: asrck_f
      - const: spba

  fsl,asrc-rate:
    $ref: /schemas/types.yaml#/definitions/uint32
    description: The mutual sample rate used by DPCM Back Ends

  fsl,asrc-width:
    $ref: /schemas/types.yaml#/definitions/uint32
    description: The mutual sample width used by DPCM Back Ends
    enum: [16, 24]

  fsl,asrc-clk-map:
    $ref: /schemas/types.yaml#/definitions/uint32
    description:
      Defines clock map used in driver
      <0> - select the map for asrc0 in imx8qm/imx8qxp
      <1> - select the map for asrc1 in imx8qm/imx8qxp
    enum: [0, 1]

  big-endian:
    type: boolean
    description:
      If this property is absent, the little endian mode will be in use as
      default. Otherwise, the big endian mode will be in use for all the
      device registers.

  fsl,asrc-format:
    $ref: /schemas/types.yaml#/definitions/uint32
    description:
      Defines a mutual sample format used by DPCM Back Ends, which can
      replace the fsl,asrc-width. The value is 2 (S16_LE), or 6 (S24_LE).
    enum: [2, 6]

required:
  - compatible
  - reg
  - interrupts
  - dmas
  - dma-names
  - clocks
  - clock-names
  - fsl,asrc-rate
  - fsl,asrc-width

allOf:
  - if:
      properties:
        compatible:
          contains:
            enum:
              - fsl,imx8qm-asrc
              - fsl,imx8qxp-asrc
    then:
      required:
        - fsl,asrc-clk-map
    else:
      properties:
        fsl,asrc-clk-map: false

additionalProperties: false

examples:
  - |
    #include <dt-bindings/interrupt-controller/irq.h>
    #include <dt-bindings/clock/imx6qdl-clock.h>
    asrc: asrc@2034000 {
        compatible = "fsl,imx53-asrc";
        reg = <0x02034000 0x4000>;
        interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>;
        clocks = <&clks IMX6QDL_CLK_ASRC_IPG>,
                 <&clks IMX6QDL_CLK_ASRC_MEM>, <&clks 0>,
                 <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
                 <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
                 <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
                 <&clks IMX6QDL_CLK_ASRC>, <&clks 0>, <&clks 0>,
                 <&clks IMX6QDL_CLK_SPBA>;
        clock-names = "mem", "ipg", "asrck_0",
                "asrck_1", "asrck_2", "asrck_3", "asrck_4",
                "asrck_5", "asrck_6", "asrck_7", "asrck_8",
                "asrck_9", "asrck_a", "asrck_b", "asrck_c",
                "asrck_d", "asrck_e", "asrck_f", "spba";
        dmas = <&sdma 17 23 1>, <&sdma 18 23 1>, <&sdma 19 23 1>,
               <&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>;
        dma-names = "rxa", "rxb", "rxc",
                    "txa", "txb", "txc";
        fsl,asrc-rate  = <48000>;
        fsl,asrc-width = <16>;
    };