Merge remote-tracking branch 'origin/master' into next
(Pickup Stephen's fix d4d7b2a11c423a8d4088bb0090e4c8d626d043bc)
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 6926b61..0a3d556 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -345,7 +345,7 @@
config KEXEC
bool "kexec system call (EXPERIMENTAL)"
- depends on (PPC_BOOK3S || FSL_BOOKE) && EXPERIMENTAL
+ depends on (PPC_BOOK3S || FSL_BOOKE || (44x && !SMP && !47x)) && EXPERIMENTAL
help
kexec is a system call that implements the ability to shutdown your
current kernel, and to start another kernel. It is like a reboot
diff --git a/arch/powerpc/boot/dts/hcu4.dts b/arch/powerpc/boot/dts/hcu4.dts
deleted file mode 100644
index 7988598..0000000
--- a/arch/powerpc/boot/dts/hcu4.dts
+++ /dev/null
@@ -1,168 +0,0 @@
-/*
-* Device Tree Source for Netstal Maschinen HCU4
-* based on the IBM Walnut
-*
-* Copyright 2008
-* Niklaus Giger <niklaus.giger@member.fsf.org>
-*
-* Copyright 2007 IBM Corp.
-* Josh Boyer <jwboyer@linux.vnet.ibm.com>
-*
-* This file is licensed under the terms of the GNU General Public
-* License version 2. This program is licensed "as is" without
-* any warranty of any kind, whether express or implied.
-*/
-
-/dts-v1/;
-
-/ {
- #address-cells = <0x1>;
- #size-cells = <0x1>;
- model = "netstal,hcu4";
- compatible = "netstal,hcu4";
- dcr-parent = <0x1>;
-
- aliases {
- ethernet0 = "/plb/opb/ethernet@ef600800";
- serial0 = "/plb/opb/serial@ef600300";
- };
-
- cpus {
- #address-cells = <0x1>;
- #size-cells = <0x0>;
-
- cpu@0 {
- device_type = "cpu";
- model = "PowerPC,405GPr";
- reg = <0x0>;
- clock-frequency = <0>; /* Filled in by U-Boot */
- timebase-frequency = <0x0>; /* Filled in by U-Boot */
- i-cache-line-size = <0x20>;
- d-cache-line-size = <0x20>;
- i-cache-size = <0x4000>;
- d-cache-size = <0x4000>;
- dcr-controller;
- dcr-access-method = "native";
- linux,phandle = <0x1>;
- };
- };
-
- memory {
- device_type = "memory";
- reg = <0x0 0x0>; /* Filled in by U-Boot */
- };
-
- UIC0: interrupt-controller {
- compatible = "ibm,uic";
- interrupt-controller;
- cell-index = <0x0>;
- dcr-reg = <0xc0 0x9>;
- #address-cells = <0x0>;
- #size-cells = <0x0>;
- #interrupt-cells = <0x2>;
- linux,phandle = <0x2>;
- };
-
- plb {
- compatible = "ibm,plb3";
- #address-cells = <0x1>;
- #size-cells = <0x1>;
- ranges;
- clock-frequency = <0x0>; /* Filled in by U-Boot */
-
- SDRAM0: memory-controller {
- compatible = "ibm,sdram-405gp";
- dcr-reg = <0x10 0x2>;
- };
-
- MAL: mcmal {
- compatible = "ibm,mcmal-405gp", "ibm,mcmal";
- dcr-reg = <0x180 0x62>;
- num-tx-chans = <0x1>;
- num-rx-chans = <0x1>;
- interrupt-parent = <0x2>;
- interrupts = <0xb 0x4 0xc 0x4 0xa 0x4 0xd 0x4 0xe 0x4>;
- linux,phandle = <0x3>;
- };
-
- POB0: opb {
- compatible = "ibm,opb-405gp", "ibm,opb";
- #address-cells = <0x1>;
- #size-cells = <0x1>;
- ranges = <0xef600000 0xef600000 0xa00000>;
- dcr-reg = <0xa0 0x5>;
- clock-frequency = <0x0>; /* Filled in by U-Boot */
-
- UART0: serial@ef600300 {
- device_type = "serial";
- compatible = "ns16550";
- reg = <0xef600300 0x8>;
- virtual-reg = <0xef600300>;
- clock-frequency = <0x0>;/* Filled in by U-Boot */
- current-speed = <0>; /* Filled in by U-Boot */
- interrupt-parent = <0x2>;
- interrupts = <0x0 0x4>;
- };
-
- IIC: i2c@ef600500 {
- compatible = "ibm,iic-405gp", "ibm,iic";
- reg = <0xef600500 0x11>;
- interrupt-parent = <0x2>;
- interrupts = <0x2 0x4>;
- };
-
- GPIO: gpio@ef600700 {
- compatible = "ibm,gpio-405gp";
- reg = <0xef600700 0x20>;
- };
-
- EMAC: ethernet@ef600800 {
- device_type = "network";
- compatible = "ibm,emac-405gp", "ibm,emac";
- interrupt-parent = <0x2>;
- interrupts = <0xf 0x4 0x9 0x4>;
- local-mac-address = [00 00 00 00 00 00];
- reg = <0xef600800 0x70>;
- mal-device = <0x3>;
- mal-tx-channel = <0x0>;
- mal-rx-channel = <0x0>;
- cell-index = <0x0>;
- max-frame-size = <0x5dc>;
- rx-fifo-size = <0x1000>;
- tx-fifo-size = <0x800>;
- phy-mode = "rmii";
- phy-map = <0x1>;
- };
- };
-
- EBC0: ebc {
- compatible = "ibm,ebc-405gp", "ibm,ebc";
- dcr-reg = <0x12 0x2>;
- #address-cells = <0x2>;
- #size-cells = <0x1>;
- clock-frequency = <0x0>; /* Filled in by U-Boot */
-
- sram@0,0 {
- reg = <0x0 0x0 0x80000>;
- };
-
- flash@0,80000 {
- compatible = "jedec-flash";
- bank-width = <0x1>;
- reg = <0x0 0x80000 0x80000>;
- #address-cells = <0x1>;
- #size-cells = <0x1>;
-
- partition@0 {
- label = "OpenBIOS";
- reg = <0x0 0x80000>;
- read-only;
- };
- };
- };
- };
-
- chosen {
- linux,stdout-path = "/plb/opb/serial@ef600300";
- };
-};
diff --git a/arch/powerpc/boot/dts/yosemite.dts b/arch/powerpc/boot/dts/yosemite.dts
index 64923245..30bb475 100644
--- a/arch/powerpc/boot/dts/yosemite.dts
+++ b/arch/powerpc/boot/dts/yosemite.dts
@@ -138,6 +138,42 @@
clock-frequency = <0>; /* Filled in by zImage */
interrupts = <0x5 0x1>;
interrupt-parent = <&UIC1>;
+
+ nor_flash@0,0 {
+ compatible = "amd,s29gl256n", "cfi-flash";
+ bank-width = <2>;
+ reg = <0x00000000 0x00000000 0x04000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "kernel";
+ reg = <0x00000000 0x001e0000>;
+ };
+ partition@1e0000 {
+ label = "dtb";
+ reg = <0x001e0000 0x00020000>;
+ };
+ partition@200000 {
+ label = "ramdisk";
+ reg = <0x00200000 0x01400000>;
+ };
+ partition@1600000 {
+ label = "jffs2";
+ reg = <0x01600000 0x00400000>;
+ };
+ partition@1a00000 {
+ label = "user";
+ reg = <0x01a00000 0x02540000>;
+ };
+ partition@3f40000 {
+ label = "env";
+ reg = <0x03f40000 0x00040000>;
+ };
+ partition@3f80000 {
+ label = "u-boot";
+ reg = <0x03f80000 0x00080000>;
+ };
+ };
};
UART0: serial@ef600300 {
diff --git a/arch/powerpc/configs/40x/hcu4_defconfig b/arch/powerpc/configs/40x/hcu4_defconfig
deleted file mode 100644
index ebeb4ac..0000000
--- a/arch/powerpc/configs/40x/hcu4_defconfig
+++ /dev/null
@@ -1,80 +0,0 @@
-CONFIG_40x=y
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EXPERT=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_HCU4=y
-# CONFIG_WALNUT is not set
-CONFIG_SPARSE_IRQ=y
-CONFIG_PCI=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_CONNECTOR=y
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_OF_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=m
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_PROC_DEVICETREE=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=35000
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_IBM_NEW_EMAC=y
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_OF_PLATFORM=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_PCBC=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/powerpc/configs/ppc40x_defconfig b/arch/powerpc/configs/ppc40x_defconfig
index bfd634b..e9d920c 100644
--- a/arch/powerpc/configs/ppc40x_defconfig
+++ b/arch/powerpc/configs/ppc40x_defconfig
@@ -14,7 +14,6 @@
CONFIG_PPC4xx_GPIO=y
CONFIG_ACADIA=y
CONFIG_EP405=y
-CONFIG_HCU4=y
CONFIG_HOTFOOT=y
CONFIG_KILAUEA=y
CONFIG_MAKALU=y
diff --git a/arch/powerpc/include/asm/kexec.h b/arch/powerpc/include/asm/kexec.h
index 8a33698..f921eb1 100644
--- a/arch/powerpc/include/asm/kexec.h
+++ b/arch/powerpc/include/asm/kexec.h
@@ -2,7 +2,7 @@
#define _ASM_POWERPC_KEXEC_H
#ifdef __KERNEL__
-#ifdef CONFIG_FSL_BOOKE
+#if defined(CONFIG_FSL_BOOKE) || defined(CONFIG_44x)
/*
* On FSL-BookE we setup a 1:1 mapping which covers the first 2GiB of memory
diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S
index 998a100..f7d760a 100644
--- a/arch/powerpc/kernel/misc_32.S
+++ b/arch/powerpc/kernel/misc_32.S
@@ -8,6 +8,8 @@
* kexec bits:
* Copyright (C) 2002-2003 Eric Biederman <ebiederm@xmission.com>
* GameCube/ppc32 port Copyright (C) 2004 Albert Herranz
+ * PPC44x port. Copyright (C) 2011, IBM Corporation
+ * Author: Suzuki Poulose <suzuki@in.ibm.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -736,6 +738,175 @@
mr r5, r31
li r0, 0
+#elif defined(CONFIG_44x) && !defined(CONFIG_47x)
+
+/*
+ * Code for setting up 1:1 mapping for PPC440x for KEXEC
+ *
+ * We cannot switch off the MMU on PPC44x.
+ * So we:
+ * 1) Invalidate all the mappings except the one we are running from.
+ * 2) Create a tmp mapping for our code in the other address space(TS) and
+ * jump to it. Invalidate the entry we started in.
+ * 3) Create a 1:1 mapping for 0-2GiB in chunks of 256M in original TS.
+ * 4) Jump to the 1:1 mapping in original TS.
+ * 5) Invalidate the tmp mapping.
+ *
+ * - Based on the kexec support code for FSL BookE
+ * - Doesn't support 47x yet.
+ *
+ */
+ /* Save our parameters */
+ mr r29, r3
+ mr r30, r4
+ mr r31, r5
+
+ /* Load our MSR_IS and TID to MMUCR for TLB search */
+ mfspr r3,SPRN_PID
+ mfmsr r4
+ andi. r4,r4,MSR_IS@l
+ beq wmmucr
+ oris r3,r3,PPC44x_MMUCR_STS@h
+wmmucr:
+ mtspr SPRN_MMUCR,r3
+ sync
+
+ /*
+ * Invalidate all the TLB entries except the current entry
+ * where we are running from
+ */
+ bl 0f /* Find our address */
+0: mflr r5 /* Make it accessible */
+ tlbsx r23,0,r5 /* Find entry we are in */
+ li r4,0 /* Start at TLB entry 0 */
+ li r3,0 /* Set PAGEID inval value */
+1: cmpw r23,r4 /* Is this our entry? */
+ beq skip /* If so, skip the inval */
+ tlbwe r3,r4,PPC44x_TLB_PAGEID /* If not, inval the entry */
+skip:
+ addi r4,r4,1 /* Increment */
+ cmpwi r4,64 /* Are we done? */
+ bne 1b /* If not, repeat */
+ isync
+
+ /* Create a temp mapping and jump to it */
+ andi. r6, r23, 1 /* Find the index to use */
+ addi r24, r6, 1 /* r24 will contain 1 or 2 */
+
+ mfmsr r9 /* get the MSR */
+ rlwinm r5, r9, 27, 31, 31 /* Extract the MSR[IS] */
+ xori r7, r5, 1 /* Use the other address space */
+
+ /* Read the current mapping entries */
+ tlbre r3, r23, PPC44x_TLB_PAGEID
+ tlbre r4, r23, PPC44x_TLB_XLAT
+ tlbre r5, r23, PPC44x_TLB_ATTRIB
+
+ /* Save our current XLAT entry */
+ mr r25, r4
+
+ /* Extract the TLB PageSize */
+ li r10, 1 /* r10 will hold PageSize */
+ rlwinm r11, r3, 0, 24, 27 /* bits 24-27 */
+
+ /* XXX: As of now we use 256M, 4K pages */
+ cmpwi r11, PPC44x_TLB_256M
+ bne tlb_4k
+ rotlwi r10, r10, 28 /* r10 = 256M */
+ b write_out
+tlb_4k:
+ cmpwi r11, PPC44x_TLB_4K
+ bne default
+ rotlwi r10, r10, 12 /* r10 = 4K */
+ b write_out
+default:
+ rotlwi r10, r10, 10 /* r10 = 1K */
+
+write_out:
+ /*
+ * Write out the tmp 1:1 mapping for this code in other address space
+ * Fixup EPN = RPN , TS=other address space
+ */
+ insrwi r3, r7, 1, 23 /* Bit 23 is TS for PAGEID field */
+
+ /* Write out the tmp mapping entries */
+ tlbwe r3, r24, PPC44x_TLB_PAGEID
+ tlbwe r4, r24, PPC44x_TLB_XLAT
+ tlbwe r5, r24, PPC44x_TLB_ATTRIB
+
+ subi r11, r10, 1 /* PageOffset Mask = PageSize - 1 */
+ not r10, r11 /* Mask for PageNum */
+
+ /* Switch to other address space in MSR */
+ insrwi r9, r7, 1, 26 /* Set MSR[IS] = r7 */
+
+ bl 1f
+1: mflr r8
+ addi r8, r8, (2f-1b) /* Find the target offset */
+
+ /* Jump to the tmp mapping */
+ mtspr SPRN_SRR0, r8
+ mtspr SPRN_SRR1, r9
+ rfi
+
+2:
+ /* Invalidate the entry we were executing from */
+ li r3, 0
+ tlbwe r3, r23, PPC44x_TLB_PAGEID
+
+ /* attribute fields. rwx for SUPERVISOR mode */
+ li r5, 0
+ ori r5, r5, (PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_SX | PPC44x_TLB_G)
+
+ /* Create 1:1 mapping in 256M pages */
+ xori r7, r7, 1 /* Revert back to Original TS */
+
+ li r8, 0 /* PageNumber */
+ li r6, 3 /* TLB Index, start at 3 */
+
+next_tlb:
+ rotlwi r3, r8, 28 /* Create EPN (bits 0-3) */
+ mr r4, r3 /* RPN = EPN */
+ ori r3, r3, (PPC44x_TLB_VALID | PPC44x_TLB_256M) /* SIZE = 256M, Valid */
+ insrwi r3, r7, 1, 23 /* Set TS from r7 */
+
+ tlbwe r3, r6, PPC44x_TLB_PAGEID /* PageID field : EPN, V, SIZE */
+ tlbwe r4, r6, PPC44x_TLB_XLAT /* Address translation : RPN */
+ tlbwe r5, r6, PPC44x_TLB_ATTRIB /* Attributes */
+
+ addi r8, r8, 1 /* Increment PN */
+ addi r6, r6, 1 /* Increment TLB Index */
+ cmpwi r8, 8 /* Are we done ? */
+ bne next_tlb
+ isync
+
+ /* Jump to the new mapping 1:1 */
+ li r9,0
+ insrwi r9, r7, 1, 26 /* Set MSR[IS] = r7 */
+
+ bl 1f
+1: mflr r8
+ and r8, r8, r11 /* Get our offset within page */
+ addi r8, r8, (2f-1b)
+
+ and r5, r25, r10 /* Get our target PageNum */
+ or r8, r8, r5 /* Target jump address */
+
+ mtspr SPRN_SRR0, r8
+ mtspr SPRN_SRR1, r9
+ rfi
+2:
+ /* Invalidate the tmp entry we used */
+ li r3, 0
+ tlbwe r3, r24, PPC44x_TLB_PAGEID
+ sync
+
+ /* Restore the parameters */
+ mr r3, r29
+ mr r4, r30
+ mr r5, r31
+
+ li r0, 0
#else
li r0, 0
diff --git a/arch/powerpc/platforms/40x/Kconfig b/arch/powerpc/platforms/40x/Kconfig
index d733d7c..ae5e0bfc 100644
--- a/arch/powerpc/platforms/40x/Kconfig
+++ b/arch/powerpc/platforms/40x/Kconfig
@@ -32,14 +32,6 @@
help
This option enables support for the EP405/EP405PC boards.
-config HCU4
- bool "Hcu4"
- depends on 40x
- default n
- select 405GPR
- help
- This option enables support for the Nestal Maschinen HCU4 board.
-
config HOTFOOT
bool "Hotfoot"
depends on 40x
diff --git a/arch/powerpc/platforms/40x/Makefile b/arch/powerpc/platforms/40x/Makefile
index 56e8900..88c22de 100644
--- a/arch/powerpc/platforms/40x/Makefile
+++ b/arch/powerpc/platforms/40x/Makefile
@@ -1,4 +1,3 @@
-obj-$(CONFIG_HCU4) += hcu4.o
obj-$(CONFIG_WALNUT) += walnut.o
obj-$(CONFIG_XILINX_VIRTEX_GENERIC_BOARD) += virtex.o
obj-$(CONFIG_EP405) += ep405.o
diff --git a/arch/powerpc/platforms/40x/hcu4.c b/arch/powerpc/platforms/40x/hcu4.c
deleted file mode 100644
index 60b2afe..0000000
--- a/arch/powerpc/platforms/40x/hcu4.c
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * Architecture- / platform-specific boot-time initialization code for
- * IBM PowerPC 4xx based boards. Adapted from original
- * code by Gary Thomas, Cort Dougan <cort@fsmlabs.com>, and Dan Malek
- * <dan@net4x.com>.
- *
- * Copyright(c) 1999-2000 Grant Erickson <grant@lcse.umn.edu>
- *
- * Rewritten and ported to the merged powerpc tree:
- * Copyright 2007 IBM Corporation
- * Josh Boyer <jwboyer@linux.vnet.ibm.com>
- *
- * 2002 (c) MontaVista, Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/init.h>
-#include <linux/of_platform.h>
-
-#include <asm/machdep.h>
-#include <asm/prom.h>
-#include <asm/udbg.h>
-#include <asm/time.h>
-#include <asm/uic.h>
-#include <asm/ppc4xx.h>
-
-static __initdata struct of_device_id hcu4_of_bus[] = {
- { .compatible = "ibm,plb3", },
- { .compatible = "ibm,opb", },
- { .compatible = "ibm,ebc", },
- {},
-};
-
-static int __init hcu4_device_probe(void)
-{
- of_platform_bus_probe(NULL, hcu4_of_bus, NULL);
- return 0;
-}
-machine_device_initcall(hcu4, hcu4_device_probe);
-
-static int __init hcu4_probe(void)
-{
- unsigned long root = of_get_flat_dt_root();
-
- if (!of_flat_dt_is_compatible(root, "netstal,hcu4"))
- return 0;
-
- return 1;
-}
-
-define_machine(hcu4) {
- .name = "HCU4",
- .probe = hcu4_probe,
- .progress = udbg_progress,
- .init_IRQ = uic_init_tree,
- .get_irq = uic_get_irq,
- .restart = ppc4xx_reset_system,
- .calibrate_decr = generic_calibrate_decr,
-};
diff --git a/arch/powerpc/sysdev/ppc4xx_pci.c b/arch/powerpc/sysdev/ppc4xx_pci.c
index dbfe96b..2ec046d 100644
--- a/arch/powerpc/sysdev/ppc4xx_pci.c
+++ b/arch/powerpc/sysdev/ppc4xx_pci.c
@@ -1092,6 +1092,10 @@
mtdcri(SDR0, PESDR1_460SX_HSSSLEW, 0xFFFF0000);
mtdcri(SDR0, PESDR2_460SX_HSSSLEW, 0xFFFF0000);
+ /* Set HSS PRBS enabled */
+ mtdcri(SDR0, PESDR0_460SX_HSSCTLSET, 0x00001130);
+ mtdcri(SDR0, PESDR2_460SX_HSSCTLSET, 0x00001130);
+
udelay(100);
/* De-assert PLLRESET */
@@ -1132,9 +1136,6 @@
dcri_clrset(SDR0, port->sdr_base + PESDRn_UTLSET2,
0, 0x01000000);
- /*Gen-1*/
- mtdcri(SDR0, port->sdr_base + PESDRn_460SX_RCEI, 0x08000000);
-
dcri_clrset(SDR0, port->sdr_base + PESDRn_RCSSET,
(PESDRx_RCSSET_RSTGU | PESDRx_RCSSET_RSTDL),
PESDRx_RCSSET_RSTPYN);
@@ -1148,14 +1149,42 @@
{
/* Max 128 Bytes */
out_be32 (port->utl_base + PEUTL_PBBSZ, 0x00000000);
+ /* Assert VRB and TXE - per datasheet turn off addr validation */
+ out_be32(port->utl_base + PEUTL_PCTL, 0x80800000);
return 0;
}
+static void __init ppc460sx_pciex_check_link(struct ppc4xx_pciex_port *port)
+{
+ void __iomem *mbase;
+ int attempt = 50;
+
+ port->link = 0;
+
+ mbase = ioremap(port->cfg_space.start + 0x10000000, 0x1000);
+ if (mbase == NULL) {
+ printk(KERN_ERR "%s: Can't map internal config space !",
+ port->node->full_name);
+ goto done;
+ }
+
+ while (attempt && (0 == (in_le32(mbase + PECFG_460SX_DLLSTA)
+ & PECFG_460SX_DLLSTA_LINKUP))) {
+ attempt--;
+ mdelay(10);
+ }
+ if (attempt)
+ port->link = 1;
+done:
+ iounmap(mbase);
+
+}
+
static struct ppc4xx_pciex_hwops ppc460sx_pcie_hwops __initdata = {
.core_init = ppc460sx_pciex_core_init,
.port_init_hw = ppc460sx_pciex_init_port_hw,
.setup_utl = ppc460sx_pciex_init_utl,
- .check_link = ppc4xx_pciex_check_link_sdr,
+ .check_link = ppc460sx_pciex_check_link,
};
#endif /* CONFIG_44x */
@@ -1338,15 +1367,15 @@
if (rc != 0)
return rc;
- if (ppc4xx_pciex_hwops->check_link)
- ppc4xx_pciex_hwops->check_link(port);
-
/*
* Initialize mapping: disable all regions and configure
* CFG and REG regions based on resources in the device tree
*/
ppc4xx_pciex_port_init_mapping(port);
+ if (ppc4xx_pciex_hwops->check_link)
+ ppc4xx_pciex_hwops->check_link(port);
+
/*
* Map UTL
*/
@@ -1360,13 +1389,23 @@
ppc4xx_pciex_hwops->setup_utl(port);
/*
- * Check for VC0 active and assert RDY.
+ * Check for VC0 active or PLL Locked and assert RDY.
*/
if (port->sdr_base) {
- if (port->link &&
- ppc4xx_pciex_wait_on_sdr(port, PESDRn_RCSSTS,
- 1 << 16, 1 << 16, 5000)) {
- printk(KERN_INFO "PCIE%d: VC0 not active\n", port->index);
+ if (of_device_is_compatible(port->node,
+ "ibm,plb-pciex-460sx")){
+ if (port->link && ppc4xx_pciex_wait_on_sdr(port,
+ PESDRn_RCSSTS,
+ 1 << 12, 1 << 12, 5000)) {
+ printk(KERN_INFO "PCIE%d: PLL not locked\n",
+ port->index);
+ port->link = 0;
+ }
+ } else if (port->link &&
+ ppc4xx_pciex_wait_on_sdr(port, PESDRn_RCSSTS,
+ 1 << 16, 1 << 16, 5000)) {
+ printk(KERN_INFO "PCIE%d: VC0 not active\n",
+ port->index);
port->link = 0;
}
@@ -1573,8 +1612,15 @@
dcr_write(port->dcrs, DCRO_PEGPL_OMR1BAH, lah);
dcr_write(port->dcrs, DCRO_PEGPL_OMR1BAL, lal);
dcr_write(port->dcrs, DCRO_PEGPL_OMR1MSKH, 0x7fffffff);
- /* Note that 3 here means enabled | single region */
- dcr_write(port->dcrs, DCRO_PEGPL_OMR1MSKL, sa | 3);
+ /*Enabled and single region */
+ if (of_device_is_compatible(port->node, "ibm,plb-pciex-460sx"))
+ dcr_write(port->dcrs, DCRO_PEGPL_OMR1MSKL,
+ sa | DCRO_PEGPL_460SX_OMR1MSKL_UOT
+ | DCRO_PEGPL_OMRxMSKL_VAL);
+ else
+ dcr_write(port->dcrs, DCRO_PEGPL_OMR1MSKL,
+ sa | DCRO_PEGPL_OMR1MSKL_UOT
+ | DCRO_PEGPL_OMRxMSKL_VAL);
break;
case 1:
out_le32(mbase + PECFG_POM1LAH, pciah);
@@ -1582,8 +1628,8 @@
dcr_write(port->dcrs, DCRO_PEGPL_OMR2BAH, lah);
dcr_write(port->dcrs, DCRO_PEGPL_OMR2BAL, lal);
dcr_write(port->dcrs, DCRO_PEGPL_OMR2MSKH, 0x7fffffff);
- /* Note that 3 here means enabled | single region */
- dcr_write(port->dcrs, DCRO_PEGPL_OMR2MSKL, sa | 3);
+ dcr_write(port->dcrs, DCRO_PEGPL_OMR2MSKL,
+ sa | DCRO_PEGPL_OMRxMSKL_VAL);
break;
case 2:
out_le32(mbase + PECFG_POM2LAH, pciah);
@@ -1592,7 +1638,9 @@
dcr_write(port->dcrs, DCRO_PEGPL_OMR3BAL, lal);
dcr_write(port->dcrs, DCRO_PEGPL_OMR3MSKH, 0x7fffffff);
/* Note that 3 here means enabled | IO space !!! */
- dcr_write(port->dcrs, DCRO_PEGPL_OMR3MSKL, sa | 3);
+ dcr_write(port->dcrs, DCRO_PEGPL_OMR3MSKL,
+ sa | DCRO_PEGPL_OMR3MSKL_IO
+ | DCRO_PEGPL_OMRxMSKL_VAL);
break;
}
@@ -1693,6 +1741,9 @@
if (res->flags & IORESOURCE_PREFETCH)
sa |= 0x8;
+ if (of_device_is_compatible(port->node, "ibm,plb-pciex-460sx"))
+ sa |= PCI_BASE_ADDRESS_MEM_TYPE_64;
+
out_le32(mbase + PECFG_BAR0HMPA, RES_TO_U32_HIGH(sa));
out_le32(mbase + PECFG_BAR0LMPA, RES_TO_U32_LOW(sa));
@@ -1854,6 +1905,10 @@
}
out_le16(mbase + 0x202, val);
+ /* Enable Bus master, memory, and io space */
+ if (of_device_is_compatible(port->node, "ibm,plb-pciex-460sx"))
+ out_le16(mbase + 0x204, 0x7);
+
if (!port->endpoint) {
/* Set Class Code to PCI-PCI bridge and Revision Id to 1 */
out_le32(mbase + 0x208, 0x06040001);
diff --git a/arch/powerpc/sysdev/ppc4xx_pci.h b/arch/powerpc/sysdev/ppc4xx_pci.h
index c39a134..32ce763 100644
--- a/arch/powerpc/sysdev/ppc4xx_pci.h
+++ b/arch/powerpc/sysdev/ppc4xx_pci.h
@@ -464,6 +464,18 @@
#define PECFG_POM2LAL 0x390
#define PECFG_POM2LAH 0x394
+/* 460sx only */
+#define PECFG_460SX_DLLSTA 0x3f8
+
+/* 460sx Bit Mappings */
+#define PECFG_460SX_DLLSTA_LINKUP 0x00000010
+#define DCRO_PEGPL_460SX_OMR1MSKL_UOT 0x00000004
+
+/* PEGPL Bit Mappings */
+#define DCRO_PEGPL_OMRxMSKL_VAL 0x00000001
+#define DCRO_PEGPL_OMR1MSKL_UOT 0x00000002
+#define DCRO_PEGPL_OMR3MSKL_IO 0x00000002
+
/* SDR Bit Mappings */
#define PESDRx_RCSSET_HLDPLB 0x10000000
#define PESDRx_RCSSET_RSTGU 0x01000000
diff --git a/drivers/edac/ppc4xx_edac.c b/drivers/edac/ppc4xx_edac.c
index 0de7d87..3840096 100644
--- a/drivers/edac/ppc4xx_edac.c
+++ b/drivers/edac/ppc4xx_edac.c
@@ -205,7 +205,7 @@
.remove = ppc4xx_edac_remove,
.driver = {
.owner = THIS_MODULE,
- .name = PPC4XX_EDAC_MODULE_NAME
+ .name = PPC4XX_EDAC_MODULE_NAME,
.of_match_table = ppc4xx_edac_match,
},
};
