ice: Extend malicious operations detection logic
This patch extends the existing malicious driver operation detection
logic to cover malicious operations by the VF driver as well.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c
index d7cbc2e..948c97d 100644
--- a/drivers/net/ethernet/intel/ice/ice_main.c
+++ b/drivers/net/ethernet/intel/ice/ice_main.c
@@ -951,6 +951,7 @@ static void ice_handle_mdd_event(struct ice_pf *pf)
struct ice_hw *hw = &pf->hw;
bool mdd_detected = false;
u32 reg;
+ int i;
if (!test_bit(__ICE_MDD_EVENT_PENDING, pf->state))
return;
@@ -1040,6 +1041,51 @@ static void ice_handle_mdd_event(struct ice_pf *pf)
}
}
+ /* see if one of the VFs needs to be reset */
+ for (i = 0; i < pf->num_alloc_vfs && mdd_detected; i++) {
+ struct ice_vf *vf = &pf->vf[i];
+
+ reg = rd32(hw, VP_MDET_TX_PQM(i));
+ if (reg & VP_MDET_TX_PQM_VALID_M) {
+ wr32(hw, VP_MDET_TX_PQM(i), 0xFFFF);
+ vf->num_mdd_events++;
+ dev_info(&pf->pdev->dev, "TX driver issue detected on VF %d\n",
+ i);
+ }
+
+ reg = rd32(hw, VP_MDET_TX_TCLAN(i));
+ if (reg & VP_MDET_TX_TCLAN_VALID_M) {
+ wr32(hw, VP_MDET_TX_TCLAN(i), 0xFFFF);
+ vf->num_mdd_events++;
+ dev_info(&pf->pdev->dev, "TX driver issue detected on VF %d\n",
+ i);
+ }
+
+ reg = rd32(hw, VP_MDET_TX_TDPU(i));
+ if (reg & VP_MDET_TX_TDPU_VALID_M) {
+ wr32(hw, VP_MDET_TX_TDPU(i), 0xFFFF);
+ vf->num_mdd_events++;
+ dev_info(&pf->pdev->dev, "TX driver issue detected on VF %d\n",
+ i);
+ }
+
+ reg = rd32(hw, VP_MDET_RX(i));
+ if (reg & VP_MDET_RX_VALID_M) {
+ wr32(hw, VP_MDET_RX(i), 0xFFFF);
+ vf->num_mdd_events++;
+ dev_info(&pf->pdev->dev, "RX driver issue detected on VF %d\n",
+ i);
+ }
+
+ if (vf->num_mdd_events > ICE_DFLT_NUM_MDD_EVENTS_ALLOWED) {
+ dev_info(&pf->pdev->dev,
+ "Too many MDD events on VF %d, disabled\n", i);
+ dev_info(&pf->pdev->dev,
+ "Use PF Control I/F to re-enable the VF\n");
+ set_bit(ICE_VF_STATE_DIS, vf->vf_states);
+ }
+ }
+
/* re-enable MDD interrupt cause */
clear_bit(__ICE_MDD_EVENT_PENDING, pf->state);
reg = rd32(hw, PFINT_OICR_ENA);
